1 #include "mt7628an_tplink_8m.dtsi"
4 compatible = "tplink,tl-wr902ac-v3", "mediatek,mt7628an-soc";
5 model = "TP-Link TL-WR902AC v3";
9 led-failsafe = &led_power;
10 led-running = &led_power;
11 led-upgrade = &led_power;
15 compatible = "gpio-keys";
19 gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
20 linux,code = <KEY_RESTART>;
25 gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
31 gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
37 gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
38 linux,code = <KEY_WPS_BUTTON>;
43 compatible = "gpio-leds";
46 label = "tl-wr902ac-v3:green:lan";
47 gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
51 label = "tl-wr902ac-v3:green:power";
52 gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
56 label = "tl-wr902ac-v3:green:usb";
57 gpios = <&gpio 43 GPIO_ACTIVE_LOW>;
58 trigger-sources = <&ohci_port1>, <&ehci_port1>;
59 linux,default-trigger = "usbport";
63 label = "tl-wr902ac-v3:green:wan";
64 gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
68 label = "tl-wr902ac-v3:green:wlan";
69 gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
73 label = "tl-wr902ac-v3:green:wps";
74 gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
81 groups = "i2c", "i2s", "p0led_an", "p2led_an", "p4led_an", "uart1", "wdt", "wled_an";
100 reg = <0x0000 0 0 0 0>;
101 mediatek,mtd-eeprom = <&factory 0x28000>;
102 ieee80211-freq-limit = <5000000 6000000>;
103 mtd-mac-address = <&factory 0xf100>;
104 mtd-mac-address-increment = <(-1)>;