3 #include <dt-bindings/gpio/gpio.h>
4 #include <dt-bindings/input/input.h>
7 compatible = "airlink101,ar725w", "ralink,rt2880-soc";
8 model = "Airlink101 AR725W";
11 led-boot = &led_power;
12 led-failsafe = &led_power;
13 led-running = &led_power;
14 led-upgrade = &led_power;
18 compatible = "cfi-flash";
19 reg = <0xbc400000 0x800000>;
23 compatible = "fixed-partitions";
34 reg = <0x30000 0x10000>;
38 factory: partition@40000 {
39 reg = <0x40000 0x10000>;
45 compatible = "denx,uimage";
46 reg = <0x50000 0x3B0000>;
53 compatible = "gpio-leds";
56 label = "green:power";
57 gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
62 gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
67 gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
72 compatible = "gpio-keys-polled";
73 poll-interval = <100>;
77 gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
78 linux,code = <KEY_WPS_BUTTON>;
83 gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
84 linux,code = <KEY_RESTART>;
91 groups = "i2c", "spi", "uartlite";
98 mtd-mac-address = <&factory 0x4>;
101 phy-handle = <&phy0>;
108 phy0: ethernet-phy@0 {
117 ralink,mtd-eeprom = <&factory 0x0>;