3 #include <dt-bindings/gpio/gpio.h>
4 #include <dt-bindings/input/input.h>
7 compatible = "dlink,dir-600-b1", "ralink,rt3050-soc";
8 model = "D-Link DIR-600 B1";
11 led-boot = &led_status_green;
12 led-failsafe = &led_status_green;
13 led-running = &led_status_green;
14 led-upgrade = &led_status_green;
18 compatible = "cfi-flash";
19 reg = <0x1f000000 0x800000>;
24 compatible = "fixed-partitions";
34 devdata: partition@30000 {
36 reg = <0x30000 0x10000>;
40 factory: partition@40000 {
42 reg = <0x40000 0x10000>;
47 compatible = "denx,uimage";
49 reg = <0x50000 0x3b0000>;
55 compatible = "gpio-keys-polled";
60 gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
61 linux,code = <KEY_RESTART>;
66 gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
67 linux,code = <KEY_WPS_BUTTON>;
72 compatible = "gpio-leds";
75 label = "dir-600-b1:amber:status";
76 gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
79 led_status_green: status2 {
80 label = "dir-600-b1:green:status";
81 gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
85 label = "dir-600-b1:amber:wan";
86 gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
90 label = "dir-600-b1:green:wan";
91 gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
95 label = "dir-600-b1:blue:wps";
96 gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
103 groups = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf";
109 mtd-mac-address = <&devdata 0x4004>;
113 mediatek,portmap = <0x2f>;
117 ralink,mtd-eeprom = <&devdata 0x4000>;