3 #include <dt-bindings/gpio/gpio.h>
4 #include <dt-bindings/input/input.h>
5 #include <dt-bindings/mtd/partitions/uimage.h>
8 compatible = "edimax,3g-6200n", "ralink,rt3050-soc";
9 model = "Edimax 3g-6200n";
12 led-boot = &led_power;
13 led-failsafe = &led_power;
14 led-running = &led_power;
15 led-upgrade = &led_power;
19 compatible = "cfi-flash";
20 reg = <0x1f000000 0x800000>;
25 compatible = "fixed-partitions";
37 reg = <0x30000 0x10000>;
41 factory: partition@40000 {
43 reg = <0x40000 0x10000>;
47 compatible = "fixed-layout";
51 eeprom_factory_0: eeprom@0 {
55 macaddr_factory_4: macaddr@4 {
63 reg = <0x3e0000 0x20000>;
68 compatible = "openwrt,uimage", "denx,uimage";
69 openwrt,offset = <FW_EDIMAX_OFFSET>;
70 openwrt,partition-magic = <FW_MAGIC_EDIMAX>;
72 reg = <0x50000 0x390000>;
78 compatible = "gpio-leds";
81 label = "green:power";
82 gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
87 gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
92 gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
93 trigger-sources = <&otg_port1>;
94 linux,default-trigger = "usbport";
99 compatible = "gpio-keys-polled";
100 poll-interval = <20>;
104 gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
105 linux,code = <KEY_RESTART>;
109 label = "wlanswitch";
110 gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
111 linux,code = <KEY_RFKILL>;
118 groups = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
124 nvmem-cells = <&macaddr_factory_4>;
125 nvmem-cell-names = "mac-address";
129 mediatek,portmap = <0x2f>;
133 nvmem-cells = <&eeprom_factory_0>;
134 nvmem-cell-names = "eeprom";