3 #include <dt-bindings/gpio/gpio.h>
4 #include <dt-bindings/input/input.h>
5 #include <dt-bindings/mtd/partitions/uimage.h>
8 compatible = "edimax,3g-6200nl", "ralink,rt3050-soc";
9 model = "Edimax 3g-6200nl";
12 led-boot = &led_internet;
13 led-failsafe = &led_internet;
14 led-running = &led_internet;
15 led-upgrade = &led_internet;
19 compatible = "cfi-flash";
20 reg = <0x1f000000 0x800000>;
25 compatible = "fixed-partitions";
37 reg = <0x30000 0x10000>;
41 factory: partition@40000 {
43 reg = <0x40000 0x10000>;
49 reg = <0x3e0000 0x20000>;
54 compatible = "openwrt,uimage", "denx,uimage";
55 openwrt,offset = <FW_EDIMAX_OFFSET>;
56 openwrt,partition-magic = <FW_MAGIC_EDIMAX>;
58 reg = <0x50000 0x390000>;
64 compatible = "gpio-leds";
66 led_internet: internet {
67 label = "green:internet";
68 gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
73 gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
78 compatible = "gpio-keys-polled";
83 gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
84 linux,code = <KEY_RESTART>;
91 groups = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
97 nvmem-cells = <&macaddr_factory_4>;
98 nvmem-cell-names = "mac-address";
102 mediatek,portdisable = <0x37>;
106 ralink,mtd-eeprom = <&factory 0x0>;
114 compatible = "nvmem-cells";
115 #address-cells = <1>;
118 macaddr_factory_4: macaddr@4 {