3 #include <dt-bindings/gpio/gpio.h>
4 #include <dt-bindings/input/input.h>
7 compatible = "teltonika,rut5xx", "ralink,rt3050-soc";
8 model = "Teltonika RUT5XX";
11 led-boot = &led_status;
12 led-failsafe = &led_status;
13 led-running = &led_status;
14 led-upgrade = &led_status;
18 compatible = "gpio-leds";
21 label = "green:status";
22 gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
27 compatible = "gpio-keys-polled";
32 gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
33 linux,code = <KEY_RESTART>;
38 compatible = "linux,wdt-gpio";
39 gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
41 /* hw_margin_ms is actually 280s but driver limits it to 60s */
42 hw_margin_ms = <60000>;
51 compatible = "jedec,spi-nor";
53 spi-max-frequency = <10000000>;
56 compatible = "fixed-partitions";
68 reg = <0x30000 0x10000>;
72 factory: partition@40000 {
74 reg = <0x40000 0x10000>;
79 compatible = "denx,uimage";
81 reg = <0x50000 0xfb0000>;
89 groups = "i2c", "jtag", "rgmii", "mdio", "uartf";
95 nvmem-cells = <&macaddr_factory_28>;
96 nvmem-cell-names = "mac-address";
100 mediatek,portmap = <0x3e>;
104 ralink,mtd-eeprom = <&factory 0x0>;
112 compatible = "nvmem-cells";
113 #address-cells = <1>;
116 macaddr_factory_28: macaddr@28 {