3 #include <dt-bindings/gpio/gpio.h>
4 #include <dt-bindings/input/input.h>
7 compatible = "fon,fonera-20n", "ralink,rt3052-soc";
8 model = "La Fonera 2.0N";
11 led-boot = &led_power;
12 led-failsafe = &led_power;
13 led-running = &led_power;
14 led-upgrade = &led_power;
18 compatible = "cfi-flash";
19 reg = <0x1f000000 0x800000>;
24 compatible = "fixed-partitions";
36 reg = <0x30000 0x10000>;
40 factory: partition@40000 {
42 reg = <0x40000 0x10000>;
47 compatible = "denx,uimage";
49 reg = <0x50000 0x7b0000>;
55 compatible = "gpio-leds";
58 label = "orange:wifi";
59 gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
63 label = "green:power";
64 gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
69 gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
70 trigger-sources = <&otg_port1>;
71 linux,default-trigger = "usbport";
76 compatible = "gpio-keys-polled";
81 gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
82 linux,code = <KEY_RESTART>;
87 gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
88 linux,code = <KEY_RFKILL>;
89 linux,input-type = <EV_SW>;
96 groups = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf";
102 nvmem-cells = <&macaddr_factory_28>;
103 nvmem-cell-names = "mac-address";
107 #address-cells = <1>;
110 mediatek,portmap = <0x2f>;
113 compatible = "swconfig,port";
115 swconfig,segment = "lan";
116 swconfig,portmap = <0 4>;
120 compatible = "swconfig,port";
122 swconfig,segment = "lan";
123 swconfig,portmap = <1 3>;
127 compatible = "swconfig,port";
129 swconfig,segment = "lan";
130 swconfig,portmap = <2 2>;
134 compatible = "swconfig,port";
136 swconfig,segment = "lan";
137 swconfig,portmap = <3 1>;
141 compatible = "swconfig,port";
143 swconfig,segment = "wan";
144 swconfig,portmap = <4 0>;
149 ralink,mtd-eeprom = <&factory 0x0>;
157 compatible = "nvmem-cells";
158 #address-cells = <1>;
161 macaddr_factory_28: macaddr@28 {