3 #include <dt-bindings/gpio/gpio.h>
4 #include <dt-bindings/input/input.h>
7 compatible = "jcg,jhr-n926r", "ralink,rt3052-soc";
8 model = "JCG JHR-N926R";
11 led-boot = &led_system;
12 led-failsafe = &led_system;
13 led-running = &led_system;
14 led-upgrade = &led_system;
18 compatible = "cfi-flash";
19 reg = <0x1f000000 0x800000>;
24 compatible = "fixed-partitions";
36 reg = <0x30000 0x10000>;
40 factory: partition@40000 {
42 reg = <0x40000 0x10000>;
47 compatible = "denx,uimage";
49 reg = <0x50000 0x3b0000>;
55 compatible = "gpio-leds";
59 gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
63 label = "yellow:wlan";
64 gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
69 gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
73 label = "blue:system";
74 gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
79 compatible = "gpio-export";
83 gpio-export,name = "display_data";
84 gpio-export,output = <1>;
85 gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
89 gpio-export,name = "display_clock";
90 gpio-export,output = <1>;
91 gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
95 gpio-export,name = "display_blank";
96 gpio-export,output = <1>;
97 gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
102 compatible = "gpio-keys-polled";
103 poll-interval = <20>;
107 gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
108 linux,code = <KEY_RESTART>;
113 gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
114 linux,code = <BTN_0>;
121 groups = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
127 nvmem-cells = <&macaddr_factory_2e>;
128 nvmem-cell-names = "mac-address";
132 mediatek,portmap = <0x3e>;
136 ralink,mtd-eeprom = <&factory 0x0>;
140 compatible = "nvmem-cells";
141 #address-cells = <1>;
144 macaddr_factory_2e: macaddr@2e {