3 #include <dt-bindings/gpio/gpio.h>
4 #include <dt-bindings/input/input.h>
7 compatible = "asus,rt-n56u", "ralink,rt3662-soc", "ralink,rt3883-soc";
8 model = "Asus RT-N56U";
11 led-boot = &led_power;
12 led-failsafe = &led_power;
13 led-running = &led_power;
14 led-upgrade = &led_power;
18 compatible = "cfi-flash";
19 reg = <0x1c000000 0x800000>;
23 compatible = "fixed-partitions";
28 reg = <0x0 0x0030000>;
34 reg = <0x00030000 0x00010000>;
39 factory: partition@40000 {
40 reg = <0x00040000 0x00010000>;
46 compatible = "denx,uimage";
47 reg = <0x00050000 0x007b0000>;
54 compatible = "realtek,rtl8367";
55 gpio-sda = <&gpio0 1 GPIO_ACTIVE_HIGH>;
56 gpio-sck = <&gpio0 2 GPIO_ACTIVE_HIGH>;
57 realtek,extif1 = <1 0 1 1 1 1 1 1 2>;
61 compatible = "gpio-keys-polled";
62 poll-interval = <100>;
66 gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
67 linux,code = <KEY_RESTART>;
72 gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
73 linux,code = <KEY_WPS_BUTTON>;
78 compatible = "gpio-leds";
82 gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
87 gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
92 gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
97 gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
108 groups = "spi", "i2c", "jtag", "uartf";
114 nvmem-cells = <&macaddr_factory_4>;
115 nvmem-cell-names = "mac-address";
118 mediatek,fixed-link = <1000 1 1 1>;
130 compatible = "pci1814,3091";
131 reg = <0x10000 0 0 0 0>;
132 ralink,mtd-eeprom = <&factory 0x8000>;
139 ralink,mtd-eeprom = <&factory 0x0>;
151 compatible = "nvmem-cells";
152 #address-cells = <1>;
155 macaddr_factory_4: macaddr@4 {