3 #include <dt-bindings/gpio/gpio.h>
4 #include <dt-bindings/input/input.h>
5 #include <dt-bindings/leds/common.h>
6 #include <dt-bindings/mtd/partitions/uimage.h>
9 compatible = "edimax,br-6475nd", "ralink,rt3662-soc", "ralink,rt3883-soc";
10 model = "Edimax BR-6475nD";
13 led-boot = &led_power;
14 led-failsafe = &led_power;
15 led-running = &led_power;
16 led-upgrade = &led_power;
20 compatible = "gpio-keys-polled";
21 poll-interval = <100>;
25 gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
26 linux,code = <KEY_RESTART>;
31 gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
32 linux,input-type = <EV_SW>;
33 linux,code = <KEY_RFKILL>;
38 compatible = "gpio-leds";
41 function = LED_FUNCTION_POWER;
42 color = <LED_COLOR_ID_GREEN>;
43 gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
47 function = LED_FUNCTION_WLAN;
48 color = <LED_COLOR_ID_AMBER>;
49 gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
53 label = "amber:wlan_5ghz";
54 gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
59 compatible = "cfi-flash";
60 reg = <0x1c000000 0x800000>;
64 compatible = "fixed-partitions";
69 reg = <0x00000000 0x00030000>;
75 reg = <0x00030000 0x00010000>;
82 reg = <0x00040000 0x00010000>;
86 compatible = "fixed-layout";
90 eeprom_factory_0: eeprom@0 {
94 eeprom_factory_8000: eeprom@8000 {
102 reg = <0x00050000 0x00020000>;
106 compatible = "fixed-layout";
107 #address-cells = <1>;
110 macaddr_devdata_d: macaddr@d {
117 compatible = "openwrt,uimage", "denx,uimage";
118 openwrt,offset = <FW_EDIMAX_OFFSET>;
119 openwrt,partition-magic = <FW_MAGIC_EDIMAX>;
120 reg = <0x00070000 0x00790000>;
127 compatible = "realtek,rtl8367";
128 gpio-sda = <&gpio0 5 GPIO_ACTIVE_HIGH>;
129 gpio-sck = <&gpio0 4 GPIO_ACTIVE_HIGH>;
130 realtek,extif0 = <1 0 1 1 1 1 1 1 2>;
134 * Unclear if this is the correct gpio setup; the USB ports are
135 * unpopulated on a stock BR-6475nD, even though the hardware exists
136 * and the headers are there.
140 compatible = "gpio-export";
144 gpio-export,name="usb";
145 gpio-export,output=<0>;
146 gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
154 groups = "spi", "jtag", "uartf";
169 nvmem-cells = <&macaddr_devdata_d>;
170 nvmem-cell-names = "mac-address";
173 mediatek,fixed-link = <1000 1 1 1>;
178 nvmem-cells = <&eeprom_factory_0>;
179 nvmem-cell-names = "eeprom";
190 compatible = "pci0,0";
191 reg = <0x10000 0 0 0 0>;
193 nvmem-cells = <&eeprom_factory_8000>;
194 nvmem-cell-names = "eeprom";