5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
9 compatible = "samsung,cy-swr1100", "ralink,rt3662-soc", "ralink,rt3883-soc";
10 model = "Samsung CY-SWR1100";
13 led-boot = &led_power;
14 led-failsafe = &led_power;
15 led-running = &led_power;
16 led-upgrade = &led_power;
20 compatible = "cfi-flash";
21 reg = <0x1c000000 0x800000>;
25 compatible = "fixed-partitions";
37 reg = <0x30000 0x4000>;
41 factory: partition@34000 {
43 reg = <0x34000 0x4000>;
49 reg = <0x38000 0x8000>;
55 reg = <0x40000 0x10000>;
62 reg = <0x50000 0x7b0000>;
68 compatible = "realtek,rtl8367";
69 gpio-sda = <&gpio0 1 GPIO_ACTIVE_HIGH>;
70 gpio-sck = <&gpio0 2 GPIO_ACTIVE_HIGH>;
71 realtek,extif0 = <1 0 1 1 1 1 1 1 2>;
75 compatible = "gpio-keys";
79 gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
80 linux,code = <KEY_RESTART>;
85 gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
86 linux,code = <KEY_WPS_BUTTON>;
91 compatible = "gpio-leds";
94 label = "cy-swr1100:blue:wps";
95 gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
99 label = "cy-swr1100:blue:usb";
100 gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
101 trigger-sources = <&ohci_port1>, <&ehci_port1>;
102 linux,default-trigger = "usbport";
106 label = "cy-swr1100:blue:power";
107 gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
118 groups = "i2c", "spi";
125 mediatek,fixed-link = <1000 1 1 1>;
138 compatible = "pci1814,3091";
139 reg = <0x10000 0 0 0 0>;
140 ralink,mtd-eeprom = <&factory 0x2000>;
147 ralink,mtd-eeprom = <&factory 0>;