3 #include <dt-bindings/gpio/gpio.h>
4 #include <dt-bindings/input/input.h>
7 compatible = "sitecom,wlr-6000", "ralink,rt3883-soc";
8 model = "Sitecom WLR-6000";
11 led-boot = &led_power;
12 led-failsafe = &led_power;
13 led-running = &led_power;
14 led-upgrade = &led_power;
18 compatible = "gpio-keys-polled";
23 gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
24 linux,code = <KEY_RESTART>;
29 compatible = "gpio-leds";
33 gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
38 gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
43 compatible = "gpio-export";
47 gpio-export,name = "usb";
48 gpio-export,output = <1>;
49 gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
60 groups = "i2c", "jtag", "uartf";
67 nvmem-cells = <&macaddr_factory_8004>;
68 nvmem-cell-names = "mac-address";
69 mac-address-increment = <1>;
79 phy0: ethernet-phy@0 {
83 qca,ar8327-initvals = <
84 0x04 0x07600000 /* PORT0 PAD MODE CTRL */
85 0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
86 0x10 0x40000000 /* Power-on Strapping: 176-pin interface configuration */
87 0x50 0xc437c437 /* LED Control Register 0 */
88 0x54 0xc337c337 /* LED Control Register 1 */
89 0x58 0x00000000 /* LED Control Register 2 */
90 0x5c 0x03ffff00 /* LED Control Register 3 */
91 0x7c 0x0000007e /* PORT0_STATUS */
92 0x94 0x0000007e /* PORT6 STATUS */
102 compatible = "jedec,spi-nor";
104 spi-max-frequency = <8600000>;
108 compatible = "fixed-partitions";
109 #address-cells = <1>;
119 label = "u-boot-env";
120 reg = <0x30000 0x10000>;
124 factory: partition@40000 {
126 reg = <0x40000 0x10000>;
130 compatible = "fixed-layout";
131 #address-cells = <1>;
134 eeprom_factory_0: eeprom@0 {
138 eeprom_factory_8000: eeprom@8000 {
139 reg = <0x8000 0x200>;
142 macaddr_factory_8004: macaddr@8004 {
149 compatible = "denx,uimage";
151 reg = <0x50000 0x713000>;
155 label = "manufacture";
156 reg = <0x763000 0x7D000>;
162 reg = <0x7E0000 0x10000>;
168 reg = <0x7F0000 0x10000>;
183 compatible = "pci1814,3091";
184 reg = <0x10000 0 0 0 0>;
185 nvmem-cells = <&eeprom_factory_8000>;
186 nvmem-cell-names = "eeprom";
192 nvmem-cells = <&eeprom_factory_0>;
193 nvmem-cell-names = "eeprom";