3 #include <dt-bindings/gpio/gpio.h>
4 #include <dt-bindings/input/input.h>
7 compatible = "sitecom,wlr-6000", "ralink,rt3883-soc";
8 model = "Sitecom WLR-6000";
11 led-boot = &led_power;
12 led-failsafe = &led_power;
13 led-running = &led_power;
14 led-upgrade = &led_power;
18 compatible = "gpio-keys-polled";
23 gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
24 linux,code = <KEY_RESTART>;
29 compatible = "gpio-leds";
32 label = "wlr-6000:red:power";
33 gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
37 label = "wlr-6000:white:ops";
38 gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
43 compatible = "gpio-export";
47 gpio-export,name = "usb";
48 gpio-export,output = <1>;
49 gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
60 groups = "i2c", "jtag", "uartf";
67 mtd-mac-address = <&factory 0x8004>;
68 mtd-mac-address-increment = <1>;
78 phy0: ethernet-phy@0 {
82 qca,ar8327-initvals = <
83 0x04 0x07600000 /* PORT0 PAD MODE CTRL */
84 0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
85 0x10 0x40000000 /* Power-on Strapping: 176-pin interface configuration */
86 0x50 0xc437c437 /* LED Control Register 0 */
87 0x54 0xc337c337 /* LED Control Register 1 */
88 0x58 0x00000000 /* LED Control Register 2 */
89 0x5c 0x03ffff00 /* LED Control Register 3 */
90 0x7c 0x0000007e /* PORT0_STATUS */
91 0x94 0x0000007e /* PORT6 STATUS */
101 compatible = "jedec,spi-nor";
103 spi-max-frequency = <8600000>;
107 compatible = "fixed-partitions";
108 #address-cells = <1>;
118 label = "u-boot-env";
119 reg = <0x30000 0x10000>;
123 factory: partition@40000 {
125 reg = <0x40000 0x10000>;
130 compatible = "denx,uimage";
132 reg = <0x50000 0x713000>;
136 label = "manufacture";
137 reg = <0x763000 0x7D000>;
143 reg = <0x7E0000 0x10000>;
149 reg = <0x7F0000 0x10000>;
164 compatible = "pci1814,3091";
165 reg = <0x10000 0 0 0 0>;
166 ralink,mtd-eeprom = <&factory 0x8000>;
173 ralink,mtd-eeprom = <&factory 0x0>;