5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
9 compatible = "sitecom,wlr-6000", "ralink,rt3883-soc";
10 model = "Sitecom WLR-6000";
13 led-boot = &led_power;
14 led-failsafe = &led_power;
15 led-running = &led_power;
16 led-upgrade = &led_power;
20 compatible = "gpio-keys-polled";
25 gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
26 linux,code = <KEY_RESTART>;
31 compatible = "gpio-leds";
34 label = "wlr-6000:red:power";
35 gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
39 label = "wlr-6000:white:ops";
40 gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
45 compatible = "gpio-export";
49 gpio-export,name = "usb";
50 gpio-export,output = <1>;
51 gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
62 ralink,group = "i2c", "jtag", "uartf";
63 ralink,function = "gpio";
69 mtd-mac-address = <&factory 0x8004>;
70 mtd-mac-address-increment = <1>;
80 phy0: ethernet-phy@0 {
84 qca,ar8327-initvals = <
85 0x04 0x07600000 /* PORT0 PAD MODE CTRL */
86 0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
87 0x10 0x40000000 /* Power-on Strapping: 176-pin interface configuration */
88 0x50 0xc437c437 /* LED Control Register 0 */
89 0x54 0xc337c337 /* LED Control Register 1 */
90 0x58 0x00000000 /* LED Control Register 2 */
91 0x5c 0x03ffff00 /* LED Control Register 3 */
92 0x7c 0x0000007e /* PORT0_STATUS */
93 0x94 0x0000007e /* PORT6 STATUS */
103 compatible = "jedec,spi-nor";
105 spi-max-frequency = <8600000>;
109 compatible = "fixed-partitions";
110 #address-cells = <1>;
120 label = "u-boot-env";
121 reg = <0x30000 0x10000>;
125 factory: partition@40000 {
127 reg = <0x40000 0x10000>;
132 compatible = "denx,uimage";
134 reg = <0x50000 0x713000>;
138 label = "manufacture";
139 reg = <0x763000 0x7D000>;
145 reg = <0x7E0000 0x10000>;
151 reg = <0x7F0000 0x10000>;
166 compatible = "pci1814,3091";
167 reg = <0x10000 0 0 0 0>;
168 ralink,mtd-eeprom = <&factory 0x8000>;
175 ralink,mtd-eeprom = <&factory 0x0>;