3 #include <dt-bindings/gpio/gpio.h>
4 #include <dt-bindings/input/input.h>
7 compatible = "wiznet,wizfi630a", "ralink,rt5350-soc";
8 model = "WIZnet WizFi630A";
12 led-failsafe = &led_run;
13 led-running = &led_run;
14 led-upgrade = &led_run;
18 bootargs = "console=ttyS1,115200";
22 compatible = "gpio-leds";
26 gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
31 gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
36 gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
41 gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
46 compatible = "gpio-keys-polled";
51 gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
52 linux,code = <KEY_RESTART>;
57 gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
58 linux,code = <KEY_WPS_BUTTON>;
63 gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
69 gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
79 compatible = "jedec,spi-nor";
81 spi-max-frequency = <10000000>;
84 compatible = "fixed-partitions";
98 reg = <0x30000 0x10000>;
102 factory: partition@40000 {
105 reg = <0x40000 0x10000>;
110 compatible = "denx,uimage";
113 reg = <0x50000 0xfb0000>;
121 pinctrl-names = "default";
122 pinctrl-0 = <&uartf_pins>;
127 groups = "i2c", "jtag" ;
133 nvmem-cells = <&macaddr_factory_4>;
134 nvmem-cell-names = "mac-address";
138 mediatek,portmap = <0x17>;
142 ralink,mtd-eeprom = <&factory 0x0>;
146 compatible = "nvmem-cells";
147 #address-cells = <1>;
150 macaddr_factory_4: macaddr@4 {