1 /* Copyright Statement:
3 * This software/firmware and related documentation ("MediaTek Software") are
4 * protected under relevant copyright laws. The information contained herein
5 * is confidential and proprietary to MediaTek Inc. and/or its licensors.
6 * Without the prior written permission of MediaTek inc. and/or its licensors,
7 * any reproduction, modification, use or disclosure of MediaTek Software,
8 * and information contained herein, in whole or in part, shall be strictly prohibited.
10 * MediaTek Inc. (C) 2010. All rights reserved.
12 * BY OPENING THIS FILE, RECEIVER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
13 * THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE")
14 * RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO RECEIVER ON
15 * AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
16 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
17 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
18 * NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
19 * SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
20 * SUPPLIED WITH THE MEDIATEK SOFTWARE, AND RECEIVER AGREES TO LOOK ONLY TO SUCH
21 * THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. RECEIVER EXPRESSLY ACKNOWLEDGES
22 * THAT IT IS RECEIVER'S SOLE RESPONSIBILITY TO OBTAIN FROM ANY THIRD PARTY ALL PROPER LICENSES
23 * CONTAINED IN MEDIATEK SOFTWARE. MEDIATEK SHALL ALSO NOT BE RESPONSIBLE FOR ANY MEDIATEK
24 * SOFTWARE RELEASES MADE TO RECEIVER'S SPECIFICATION OR TO CONFORM TO A PARTICULAR
25 * STANDARD OR OPEN FORUM. RECEIVER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND
26 * CUMULATIVE LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
27 * AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
28 * OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY RECEIVER TO
29 * MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE.
31 * The following software/firmware and/or related documentation ("MediaTek Software")
32 * have been modified by MediaTek Inc. All revisions are subject to any receiver's
33 * applicable license agreements with MediaTek Inc.
35 #ifndef __MT_MSDC_DEUBG__
36 #define __MT_MSDC_DEUBG__
38 //==========================
39 extern u32 sdio_pro_enable
;
40 /* for a type command, e.g. CMD53, 2 blocks */
42 u32 max_tc
; /* Max tick count */
44 u32 tot_tc
; /* total tick count */
46 u32 count
; /* the counts of the command */
49 /* dump when total_tc and total_bytes */
51 u32 total_tc
; /* total tick count of CMD52 and CMD53 */
52 u32 total_tx_bytes
; /* total bytes of CMD53 Tx */
53 u32 total_rx_bytes
; /* total bytes of CMD53 Rx */
56 struct cmd_profile cmd52_tx
;
57 struct cmd_profile cmd52_rx
;
59 /*CMD53 in byte unit */
60 struct cmd_profile cmd53_tx_byte
[512];
61 struct cmd_profile cmd53_rx_byte
[512];
63 /*CMD53 in block unit */
64 struct cmd_profile cmd53_tx_blk
[100];
65 struct cmd_profile cmd53_rx_blk
[100];
68 //==========================
72 SD_TOOL_PM_ENABLE
= 2,
73 SD_TOOL_SDIO_PROFILE
= 3,
81 extern msdc_mode drv_mode
[4];
82 extern u32 dma_size
[4];
84 /* Debug message event */
85 #define DBG_EVT_NONE (0) /* No event */
86 #define DBG_EVT_DMA (1 << 0) /* DMA related event */
87 #define DBG_EVT_CMD (1 << 1) /* MSDC CMD related event */
88 #define DBG_EVT_RSP (1 << 2) /* MSDC CMD RSP related event */
89 #define DBG_EVT_INT (1 << 3) /* MSDC INT event */
90 #define DBG_EVT_CFG (1 << 4) /* MSDC CFG event */
91 #define DBG_EVT_FUC (1 << 5) /* Function event */
92 #define DBG_EVT_OPS (1 << 6) /* Read/Write operation event */
93 #define DBG_EVT_FIO (1 << 7) /* FIFO operation event */
94 #define DBG_EVT_WRN (1 << 8) /* Warning event */
95 #define DBG_EVT_PWR (1 << 9) /* Power event */
96 #define DBG_EVT_ALL (0xffffffff)
98 #define DBG_EVT_MASK (DBG_EVT_ALL)
100 extern unsigned int sd_debug_zone
[4];
102 #if 0 /* +++ chhung */
106 printk("[BUG] %s LINE:%d FILE:%s\n", #x, __LINE__, __FILE__); \
110 #endif /* end of +++ */
112 #define N_MSG(evt, fmt, args...)
115 if ((DBG_EVT_##evt) & sd_debug_zone[host->id]) { \
116 printk(KERN_ERR TAG"%d -> "fmt" <- %s() : L<%d> PID<%s><0x%x>\n", \
117 host->id, ##args , __FUNCTION__, __LINE__, current->comm, current->pid); \
122 #define ERR_MSG(fmt, args...) \
124 printk(KERN_ERR TAG"%d -> "fmt" <- %s() : L<%d> PID<%s><0x%x>\n", \
125 host->id, ##args , __FUNCTION__, __LINE__, current->comm, current->pid); \
129 //defined CONFIG_MTK_MMC_CD_POLL
130 #define INIT_MSG(fmt, args...)
131 #define IRQ_MSG(fmt, args...)
133 #define INIT_MSG(fmt, args...) \
135 printk(KERN_ERR TAG"%d -> "fmt" <- %s() : L<%d> PID<%s><0x%x>\n", \
136 host->id, ##args , __FUNCTION__, __LINE__, current->comm, current->pid); \
139 /* PID in ISR in not corrent */
140 #define IRQ_MSG(fmt, args...) \
142 printk(KERN_ERR TAG"%d -> "fmt" <- %s() : L<%d>\n", \
143 host->id, ##args , __FUNCTION__, __LINE__); \
147 int msdc_debug_proc_init(void);
149 #if 0 /* --- chhung */
150 void msdc_init_gpt(void);
151 extern void GPT_GetCounter64(UINT32
*cntL32
, UINT32
*cntH32
);
152 #endif /* end of --- */
153 u32
msdc_time_calc(u32 old_L32
, u32 old_H32
, u32 new_L32
, u32 new_H32
);
154 void msdc_performance(u32 opcode
, u32 sizes
, u32 bRx
, u32 ticks
);