target/linux/ramips/rt288x/base-files/etc/board.d/02_network

   1 #!/bin/sh
   2
   3 . /lib/functions.sh
   4 . /lib/functions/uci-defaults.sh
   5 . /lib/functions/system.sh
   6
   7 ramips_setup_interfaces()
   8 {
   9         local board="$1"
  10
  11         case $board in
  12         airlink101,ar670w|\
  13         airlink101,ar725w)
  14                 ucidef_add_switch "switch0" \
  15                         "0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "6t@eth0"
  16                 ;;
  17         asus,rt-n15)
  18                 ucidef_add_switch "switch0" \
  19                         "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5@eth0"
  20                 ;;
  21         belkin,f5d8235-v1|\
  22         buffalo,wzr-agl300nh|\
  23         ralink,v11st-fe)
  24                 ucidef_add_switch "switch0" \
  25                         "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5@eth0"
  26                 ;;
  27         buffalo,wli-tx4-ag300n|\
  28         dlink,dap-1522-a1)
  29                 ucidef_set_interface_lan "eth0"
  30                 ;;
  31         *)
  32                 ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
  33                 ;;
  34         esac
  35 }
  36
  37 ramips_setup_macs()
  38 {
  39         local board="$1"
  40         local lan_mac=""
  41         local wan_mac=""
  42         local label_mac=""
  43
  44         case $board in
  45         airlink101,ar670w)
  46                 wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x2004)" 1)
  47                 ;;
  48         airlink101,ar725w|\
  49         asus,rt-n15|\
  50         belkin,f5d8235-v1|\
  51         buffalo,wzr-agl300nh)
  52                 wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x4)" 1)
  53                 ;;
  54         esac
  55
  56         [ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
  57         [ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac
  58         [ -n "$label_mac" ] && ucidef_set_label_macaddr $label_mac
  59 }
  60
  61 board_config_update
  62 board=$(board_name)
  63 ramips_setup_interfaces $board
  64 ramips_setup_macs $board
  65 board_config_flush
  66
  67 exit 0