1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
5 #define STRINGIZE(s) #s
6 #define LAN_LABEL(p, s) STRINGIZE(p ## s)
7 #define SWITCH_PORT_LABEL(n) LAN_LABEL(lan, n)
9 #define INTERNAL_PHY(n) \
10 phy##n: ethernet-phy@##n { \
12 compatible = "ethernet-phy-ieee802.3-c22"; \
16 #define EXTERNAL_PHY(n) \
17 phy##n: ethernet-phy@##n { \
19 compatible = "ethernet-phy-ieee802.3-c22"; \
22 #define EXTERNAL_SFP_PHY(n) \
23 phy##n: ethernet-phy@##n { \
24 compatible = "ethernet-phy-ieee802.3-c22"; \
30 #define SWITCH_PORT(n, s, m) \
33 label = SWITCH_PORT_LABEL(s) ; \
34 phy-handle = <&phy##n>; \
38 #define SWITCH_SFP_PORT(n, s, m) \
41 label = SWITCH_PORT_LABEL(s) ; \
42 phy-handle = <&phy##n>; \
54 compatible = "realtek,rtl838x-soc";
59 frequency = <500000000>;
62 compatible = "mips,mips4KEc";
68 bootargs = "console=ttyS0,115200";
72 compatible = "fixed-clock";
74 clock-frequency = <200000000>;
78 compatible = "mti,cpu-interrupt-controller";
80 #interrupt-cells = <1>;
85 compatible = "simple-bus";
88 ranges = <0x0 0x18000000 0x10000>;
90 intc: interrupt-controller@3000 {
91 compatible = "realtek,rtl8380-intc", "realtek,rtl-intc";
94 #interrupt-cells = <2>;
96 interrupt-parent = <&cpuintc>;
97 interrupts = <2>, <3>, <4>, <5>, <6>;
101 compatible = "realtek,rtl8380-spi";
102 reg = <0x1200 0x100>;
104 #address-cells = <1>;
109 compatible = "ns16550a";
110 reg = <0x2000 0x100>;
114 interrupt-parent = <&intc>;
124 pinctrl-names = "default";
125 pinctrl-0 = <&enable_uart1>;
127 compatible = "ns16550a";
128 reg = <0x2100 0x100>;
132 interrupt-parent = <&intc>;
143 watchdog0: watchdog@3150 {
144 compatible = "realtek,rtl8380-wdt";
147 realtek,reset-mode = "soc";
152 interrupt-parent = <&intc>;
153 interrupt-names = "phase1", "phase2";
154 interrupts = <19 3>, <18 4>;
157 gpio0: gpio-controller@3500 {
158 compatible = "realtek,rtl8380-gpio", "realtek,otto-gpio";
165 interrupt-controller;
166 #interrupt-cells = <2>;
167 interrupt-parent = <&intc>;
172 pinmux: pinmux@1b001000 {
173 compatible = "pinctrl-single";
174 reg = <0x1b001000 0x4>;
176 pinctrl-single,bit-per-mux;
177 pinctrl-single,register-width = <32>;
178 pinctrl-single,function-mask = <0x1>;
179 #pinctrl-cells = <2>;
181 enable_uart1: pinmux_enable_uart1 {
182 pinctrl-single,bits = <0x0 0x10 0x10>;
187 pinmux_led: pinmux@1b00a000 {
188 compatible = "pinctrl-single";
189 reg = <0x1b00a000 0x4>;
191 pinctrl-single,bit-per-mux;
192 pinctrl-single,register-width = <32>;
193 pinctrl-single,function-mask = <0x1>;
194 #pinctrl-cells = <2>;
197 pinmux_disable_sys_led: disable_sys_led {
198 pinctrl-single,bits = <0x0 0x0 0x8000>;
202 ethernet0: ethernet@1b00a300 {
203 compatible = "realtek,rtl838x-eth";
204 reg = <0x1b00a300 0x100>;
205 interrupt-parent = <&intc>;
207 #interrupt-cells = <1>;
208 phy-mode = "internal";
216 switch0: switch@1b000000 {
217 compatible = "realtek,rtl83xx-switch";
219 interrupt-parent = <&intc>;