1 // SPDX-License-Identifier: GPL-2.0-only
4 #include <linux/if_bridge.h>
6 #include <asm/mach-rtl838x/mach-rtl83xx.h>
10 extern struct rtl83xx_soc_info soc_info
;
13 static void rtl83xx_init_stats(struct rtl838x_switch_priv
*priv
)
15 mutex_lock(&priv
->reg_mutex
);
17 /* Enable statistics module: all counters plus debug.
18 * On RTL839x all counters are enabled by default
20 if (priv
->family_id
== RTL8380_FAMILY_ID
)
21 sw_w32_mask(0, 3, RTL838X_STAT_CTRL
);
23 /* Reset statistics counters */
24 sw_w32_mask(0, 1, priv
->r
->stat_rst
);
26 mutex_unlock(&priv
->reg_mutex
);
29 static void rtl83xx_write_cam(int idx
, u32
*r
)
31 u32 cmd
= BIT(16) /* Execute cmd */
33 | BIT(13) /* Table type 0b01 */
36 sw_w32(r
[0], RTL838X_TBL_ACCESS_L2_DATA(0));
37 sw_w32(r
[1], RTL838X_TBL_ACCESS_L2_DATA(1));
38 sw_w32(r
[2], RTL838X_TBL_ACCESS_L2_DATA(2));
40 sw_w32(cmd
, RTL838X_TBL_ACCESS_L2_CTRL
);
41 do { } while (sw_r32(RTL838X_TBL_ACCESS_L2_CTRL
) & BIT(16));
44 static u64
rtl83xx_hash_key(struct rtl838x_switch_priv
*priv
, u64 mac
, u32 vid
)
46 switch (priv
->family_id
) {
47 case RTL8380_FAMILY_ID
:
48 return rtl838x_hash(priv
, mac
<< 12 | vid
);
49 case RTL8390_FAMILY_ID
:
50 return rtl839x_hash(priv
, mac
<< 12 | vid
);
51 case RTL9300_FAMILY_ID
:
52 return rtl930x_hash(priv
, ((u64
)vid
) << 48 | mac
);
54 pr_err("Hash not implemented\n");
59 static void rtl83xx_write_hash(int idx
, u32
*r
)
61 u32 cmd
= BIT(16) /* Execute cmd */
63 | 0 << 13 /* Table type 0b00 */
66 sw_w32(0, RTL838X_TBL_ACCESS_L2_DATA(0));
67 sw_w32(0, RTL838X_TBL_ACCESS_L2_DATA(1));
68 sw_w32(0, RTL838X_TBL_ACCESS_L2_DATA(2));
69 sw_w32(cmd
, RTL838X_TBL_ACCESS_L2_CTRL
);
70 do { } while (sw_r32(RTL838X_TBL_ACCESS_L2_CTRL
) & BIT(16));
73 static void rtl83xx_enable_phy_polling(struct rtl838x_switch_priv
*priv
)
79 /* Enable all ports with a PHY, including the SFP-ports */
80 for (i
= 0; i
< priv
->cpu_port
; i
++) {
81 if (priv
->ports
[i
].phy
)
85 pr_debug("%s: %16llx\n", __func__
, v
);
86 priv
->r
->set_port_reg_le(v
, priv
->r
->smi_poll_ctrl
);
88 /* PHY update complete, there is no global PHY polling enable bit on the 9300 */
89 if (priv
->family_id
== RTL8390_FAMILY_ID
)
90 sw_w32_mask(0, BIT(7), RTL839X_SMI_GLB_CTRL
);
91 else if(priv
->family_id
== RTL9300_FAMILY_ID
)
92 sw_w32_mask(0, 0x8000, RTL838X_SMI_GLB_CTRL
);
95 const struct rtl83xx_mib_desc rtl83xx_mib
[] = {
96 MIB_DESC(2, 0xf8, "ifInOctets"),
97 MIB_DESC(2, 0xf0, "ifOutOctets"),
98 MIB_DESC(1, 0xec, "dot1dTpPortInDiscards"),
99 MIB_DESC(1, 0xe8, "ifInUcastPkts"),
100 MIB_DESC(1, 0xe4, "ifInMulticastPkts"),
101 MIB_DESC(1, 0xe0, "ifInBroadcastPkts"),
102 MIB_DESC(1, 0xdc, "ifOutUcastPkts"),
103 MIB_DESC(1, 0xd8, "ifOutMulticastPkts"),
104 MIB_DESC(1, 0xd4, "ifOutBroadcastPkts"),
105 MIB_DESC(1, 0xd0, "ifOutDiscards"),
106 MIB_DESC(1, 0xcc, ".3SingleCollisionFrames"),
107 MIB_DESC(1, 0xc8, ".3MultipleCollisionFrames"),
108 MIB_DESC(1, 0xc4, ".3DeferredTransmissions"),
109 MIB_DESC(1, 0xc0, ".3LateCollisions"),
110 MIB_DESC(1, 0xbc, ".3ExcessiveCollisions"),
111 MIB_DESC(1, 0xb8, ".3SymbolErrors"),
112 MIB_DESC(1, 0xb4, ".3ControlInUnknownOpcodes"),
113 MIB_DESC(1, 0xb0, ".3InPauseFrames"),
114 MIB_DESC(1, 0xac, ".3OutPauseFrames"),
115 MIB_DESC(1, 0xa8, "DropEvents"),
116 MIB_DESC(1, 0xa4, "tx_BroadcastPkts"),
117 MIB_DESC(1, 0xa0, "tx_MulticastPkts"),
118 MIB_DESC(1, 0x9c, "CRCAlignErrors"),
119 MIB_DESC(1, 0x98, "tx_UndersizePkts"),
120 MIB_DESC(1, 0x94, "rx_UndersizePkts"),
121 MIB_DESC(1, 0x90, "rx_UndersizedropPkts"),
122 MIB_DESC(1, 0x8c, "tx_OversizePkts"),
123 MIB_DESC(1, 0x88, "rx_OversizePkts"),
124 MIB_DESC(1, 0x84, "Fragments"),
125 MIB_DESC(1, 0x80, "Jabbers"),
126 MIB_DESC(1, 0x7c, "Collisions"),
127 MIB_DESC(1, 0x78, "tx_Pkts64Octets"),
128 MIB_DESC(1, 0x74, "rx_Pkts64Octets"),
129 MIB_DESC(1, 0x70, "tx_Pkts65to127Octets"),
130 MIB_DESC(1, 0x6c, "rx_Pkts65to127Octets"),
131 MIB_DESC(1, 0x68, "tx_Pkts128to255Octets"),
132 MIB_DESC(1, 0x64, "rx_Pkts128to255Octets"),
133 MIB_DESC(1, 0x60, "tx_Pkts256to511Octets"),
134 MIB_DESC(1, 0x5c, "rx_Pkts256to511Octets"),
135 MIB_DESC(1, 0x58, "tx_Pkts512to1023Octets"),
136 MIB_DESC(1, 0x54, "rx_Pkts512to1023Octets"),
137 MIB_DESC(1, 0x50, "tx_Pkts1024to1518Octets"),
138 MIB_DESC(1, 0x4c, "rx_StatsPkts1024to1518Octets"),
139 MIB_DESC(1, 0x48, "tx_Pkts1519toMaxOctets"),
140 MIB_DESC(1, 0x44, "rx_Pkts1519toMaxOctets"),
141 MIB_DESC(1, 0x40, "rxMacDiscards")
148 static enum dsa_tag_protocol
rtl83xx_get_tag_protocol(struct dsa_switch
*ds
, int port
)
150 /* The switch does not tag the frames, instead internally the header
151 * structure for each packet is tagged accordingly.
153 return DSA_TAG_PROTO_TRAILER
;
156 static int rtl83xx_setup(struct dsa_switch
*ds
)
159 struct rtl838x_switch_priv
*priv
= ds
->priv
;
160 u64 port_bitmap
= BIT_ULL(priv
->cpu_port
);
162 pr_debug("%s called\n", __func__
);
164 /* Disable MAC polling the PHY so that we can start configuration */
165 priv
->r
->set_port_reg_le(0ULL, priv
->r
->smi_poll_ctrl
);
167 for (i
= 0; i
< ds
->num_ports
; i
++)
168 priv
->ports
[i
].enable
= false;
169 priv
->ports
[priv
->cpu_port
].enable
= true;
171 /* Isolate ports from each other: traffic only CPU <-> port */
172 /* Setting bit j in register RTL838X_PORT_ISO_CTRL(i) allows
173 * traffic from source port i to destination port j
175 for (i
= 0; i
< priv
->cpu_port
; i
++) {
176 if (priv
->ports
[i
].phy
) {
177 priv
->r
->set_port_reg_be(BIT_ULL(priv
->cpu_port
) | BIT(i
),
178 priv
->r
->port_iso_ctrl(i
));
179 port_bitmap
|= BIT_ULL(i
);
182 priv
->r
->set_port_reg_be(port_bitmap
, priv
->r
->port_iso_ctrl(priv
->cpu_port
));
184 if (priv
->family_id
== RTL8380_FAMILY_ID
)
185 rtl838x_print_matrix();
187 rtl839x_print_matrix();
189 rtl83xx_init_stats(priv
);
191 ds
->configure_vlan_while_not_filtering
= true;
193 /* Enable MAC Polling PHY again */
194 rtl83xx_enable_phy_polling(priv
);
195 pr_debug("Please wait until PHY is settled\n");
200 static int rtl930x_setup(struct dsa_switch
*ds
)
203 struct rtl838x_switch_priv
*priv
= ds
->priv
;
204 u32 port_bitmap
= BIT(priv
->cpu_port
);
206 pr_info("%s called\n", __func__
);
208 // Enable CSTI STP mode
209 // sw_w32(1, RTL930X_ST_CTRL);
211 /* Disable MAC polling the PHY so that we can start configuration */
212 sw_w32(0, RTL930X_SMI_POLL_CTRL
);
214 // Disable all ports except CPU port
215 for (i
= 0; i
< ds
->num_ports
; i
++)
216 priv
->ports
[i
].enable
= false;
217 priv
->ports
[priv
->cpu_port
].enable
= true;
219 for (i
= 0; i
< priv
->cpu_port
; i
++) {
220 if (priv
->ports
[i
].phy
) {
221 priv
->r
->traffic_set(i
, BIT(priv
->cpu_port
) | BIT(i
));
222 port_bitmap
|= 1ULL << i
;
225 priv
->r
->traffic_set(priv
->cpu_port
, port_bitmap
);
227 rtl930x_print_matrix();
229 // TODO: Initialize statistics
231 ds
->configure_vlan_while_not_filtering
= true;
233 rtl83xx_enable_phy_polling(priv
);
238 static void rtl83xx_phylink_validate(struct dsa_switch
*ds
, int port
,
239 unsigned long *supported
,
240 struct phylink_link_state
*state
)
242 struct rtl838x_switch_priv
*priv
= ds
->priv
;
243 __ETHTOOL_DECLARE_LINK_MODE_MASK(mask
) = { 0, };
245 pr_debug("In %s port %d", __func__
, port
);
247 if (!phy_interface_mode_is_rgmii(state
->interface
) &&
248 state
->interface
!= PHY_INTERFACE_MODE_NA
&&
249 state
->interface
!= PHY_INTERFACE_MODE_1000BASEX
&&
250 state
->interface
!= PHY_INTERFACE_MODE_MII
&&
251 state
->interface
!= PHY_INTERFACE_MODE_REVMII
&&
252 state
->interface
!= PHY_INTERFACE_MODE_GMII
&&
253 state
->interface
!= PHY_INTERFACE_MODE_QSGMII
&&
254 state
->interface
!= PHY_INTERFACE_MODE_INTERNAL
&&
255 state
->interface
!= PHY_INTERFACE_MODE_SGMII
) {
256 bitmap_zero(supported
, __ETHTOOL_LINK_MODE_MASK_NBITS
);
258 "Unsupported interface: %d for port %d\n",
259 state
->interface
, port
);
263 /* Allow all the expected bits */
264 phylink_set(mask
, Autoneg
);
265 phylink_set_port_modes(mask
);
266 phylink_set(mask
, Pause
);
267 phylink_set(mask
, Asym_Pause
);
269 /* With the exclusion of MII and Reverse MII, we support Gigabit,
270 * including Half duplex
272 if (state
->interface
!= PHY_INTERFACE_MODE_MII
&&
273 state
->interface
!= PHY_INTERFACE_MODE_REVMII
) {
274 phylink_set(mask
, 1000baseT_Full
);
275 phylink_set(mask
, 1000baseT_Half
);
278 /* On both the 8380 and 8382, ports 24-27 are SFP ports */
279 if (port
>= 24 && port
<= 27 && priv
->family_id
== RTL8380_FAMILY_ID
)
280 phylink_set(mask
, 1000baseX_Full
);
282 phylink_set(mask
, 10baseT_Half
);
283 phylink_set(mask
, 10baseT_Full
);
284 phylink_set(mask
, 100baseT_Half
);
285 phylink_set(mask
, 100baseT_Full
);
287 bitmap_and(supported
, supported
, mask
,
288 __ETHTOOL_LINK_MODE_MASK_NBITS
);
289 bitmap_and(state
->advertising
, state
->advertising
, mask
,
290 __ETHTOOL_LINK_MODE_MASK_NBITS
);
293 static int rtl83xx_phylink_mac_link_state(struct dsa_switch
*ds
, int port
,
294 struct phylink_link_state
*state
)
296 struct rtl838x_switch_priv
*priv
= ds
->priv
;
300 if (port
< 0 || port
> priv
->cpu_port
)
304 * On the RTL9300 for at least the RTL8226B PHY, the MAC-side link
305 * state needs to be read twice in order to read a correct result.
306 * This would not be necessary for ports connected e.g. to RTL8218D
310 link
= priv
->r
->get_port_reg_le(priv
->r
->mac_link_sts
);
311 link
= priv
->r
->get_port_reg_le(priv
->r
->mac_link_sts
);
312 if (link
& BIT_ULL(port
))
314 pr_debug("%s: link state: %llx\n", __func__
, link
& BIT_ULL(port
));
317 if (priv
->r
->get_port_reg_le(priv
->r
->mac_link_dup_sts
) & BIT_ULL(port
))
320 speed
= priv
->r
->get_port_reg_le(priv
->r
->mac_link_spd_sts(port
));
321 speed
>>= (port
% 16) << 1;
322 switch (speed
& 0x3) {
324 state
->speed
= SPEED_10
;
327 state
->speed
= SPEED_100
;
330 state
->speed
= SPEED_1000
;
333 if (port
== 24 || port
== 26) /* Internal serdes */
334 state
->speed
= SPEED_2500
;
336 state
->speed
= SPEED_100
; /* Is in fact 500Mbit */
339 state
->pause
&= (MLO_PAUSE_RX
| MLO_PAUSE_TX
);
340 if (priv
->r
->get_port_reg_le(priv
->r
->mac_rx_pause_sts
) & BIT_ULL(port
))
341 state
->pause
|= MLO_PAUSE_RX
;
342 if (priv
->r
->get_port_reg_le(priv
->r
->mac_tx_pause_sts
) & BIT_ULL(port
))
343 state
->pause
|= MLO_PAUSE_TX
;
348 static void rtl83xx_config_interface(int port
, phy_interface_t interface
)
350 u32 old
, int_shift
, sds_shift
;
365 old
= sw_r32(RTL838X_SDS_MODE_SEL
);
367 case PHY_INTERFACE_MODE_1000BASEX
:
368 if ((old
>> sds_shift
& 0x1f) == 4)
370 sw_w32_mask(0x7 << int_shift
, 1 << int_shift
, RTL838X_INT_MODE_CTRL
);
371 sw_w32_mask(0x1f << sds_shift
, 4 << sds_shift
, RTL838X_SDS_MODE_SEL
);
373 case PHY_INTERFACE_MODE_SGMII
:
374 if ((old
>> sds_shift
& 0x1f) == 2)
376 sw_w32_mask(0x7 << int_shift
, 2 << int_shift
, RTL838X_INT_MODE_CTRL
);
377 sw_w32_mask(0x1f << sds_shift
, 2 << sds_shift
, RTL838X_SDS_MODE_SEL
);
382 pr_debug("configured port %d for interface %s\n", port
, phy_modes(interface
));
385 static void rtl83xx_phylink_mac_config(struct dsa_switch
*ds
, int port
,
387 const struct phylink_link_state
*state
)
389 struct rtl838x_switch_priv
*priv
= ds
->priv
;
391 int speed_bit
= priv
->family_id
== RTL8380_FAMILY_ID
? 4 : 3;
393 pr_debug("%s port %d, mode %x\n", __func__
, port
, mode
);
395 // BUG: Make this work on RTL93XX
396 if (priv
->family_id
>= RTL9300_FAMILY_ID
)
399 if (port
== priv
->cpu_port
) {
400 /* Set Speed, duplex, flow control
401 * FORCE_EN | LINK_EN | NWAY_EN | DUP_SEL
402 * | SPD_SEL = 0b10 | FORCE_FC_EN | PHY_MASTER_SLV_MANUAL_EN
405 if (priv
->family_id
== RTL8380_FAMILY_ID
) {
406 sw_w32(0x6192F, priv
->r
->mac_force_mode_ctrl(priv
->cpu_port
));
407 /* allow CRC errors on CPU-port */
408 sw_w32_mask(0, 0x8, RTL838X_MAC_PORT_CTRL(priv
->cpu_port
));
410 sw_w32_mask(0, 3, priv
->r
->mac_force_mode_ctrl(priv
->cpu_port
));
415 reg
= sw_r32(priv
->r
->mac_force_mode_ctrl(port
));
416 /* Auto-Negotiation does not work for MAC in RTL8390 */
417 if (priv
->family_id
== RTL8380_FAMILY_ID
) {
418 if (mode
== MLO_AN_PHY
|| phylink_autoneg_inband(mode
)) {
419 pr_debug("PHY autonegotiates\n");
421 sw_w32(reg
, priv
->r
->mac_force_mode_ctrl(port
));
422 rtl83xx_config_interface(port
, state
->interface
);
427 if (mode
!= MLO_AN_FIXED
)
428 pr_debug("Fixed state.\n");
430 if (priv
->family_id
== RTL8380_FAMILY_ID
) {
431 /* Clear id_mode_dis bit, and the existing port mode, let
432 * RGMII_MODE_EN bet set by mac_link_{up,down}
434 reg
&= ~(RX_PAUSE_EN
| TX_PAUSE_EN
);
436 if (state
->pause
& MLO_PAUSE_TXRX_MASK
) {
437 if (state
->pause
& MLO_PAUSE_TX
)
443 reg
&= ~(3 << speed_bit
);
444 switch (state
->speed
) {
446 reg
|= 2 << speed_bit
;
449 reg
|= 1 << speed_bit
;
453 if (priv
->family_id
== RTL8380_FAMILY_ID
) {
454 reg
&= ~(DUPLEX_FULL
| FORCE_LINK_EN
);
456 reg
|= FORCE_LINK_EN
;
457 if (state
->duplex
== DUPLEX_FULL
)
462 if (priv
->family_id
== RTL8380_FAMILY_ID
)
464 sw_w32(reg
, priv
->r
->mac_force_mode_ctrl(port
));
467 static void rtl83xx_phylink_mac_link_down(struct dsa_switch
*ds
, int port
,
469 phy_interface_t interface
)
471 struct rtl838x_switch_priv
*priv
= ds
->priv
;
472 /* Stop TX/RX to port */
473 sw_w32_mask(0x3, 0, priv
->r
->mac_port_ctrl(port
));
476 static void rtl83xx_phylink_mac_link_up(struct dsa_switch
*ds
, int port
,
478 phy_interface_t interface
,
479 struct phy_device
*phydev
)
481 struct rtl838x_switch_priv
*priv
= ds
->priv
;
482 /* Restart TX/RX to port */
483 sw_w32_mask(0, 0x3, priv
->r
->mac_port_ctrl(port
));
486 static void rtl83xx_get_strings(struct dsa_switch
*ds
,
487 int port
, u32 stringset
, u8
*data
)
491 if (stringset
!= ETH_SS_STATS
)
494 for (i
= 0; i
< ARRAY_SIZE(rtl83xx_mib
); i
++)
495 strncpy(data
+ i
* ETH_GSTRING_LEN
, rtl83xx_mib
[i
].name
,
499 static void rtl83xx_get_ethtool_stats(struct dsa_switch
*ds
, int port
,
502 struct rtl838x_switch_priv
*priv
= ds
->priv
;
503 const struct rtl83xx_mib_desc
*mib
;
507 for (i
= 0; i
< ARRAY_SIZE(rtl83xx_mib
); i
++) {
508 mib
= &rtl83xx_mib
[i
];
510 data
[i
] = sw_r32(priv
->r
->stat_port_std_mib
+ (port
<< 8) + 252 - mib
->offset
);
511 if (mib
->size
== 2) {
512 h
= sw_r32(priv
->r
->stat_port_std_mib
+ (port
<< 8) + 248 - mib
->offset
);
518 static int rtl83xx_get_sset_count(struct dsa_switch
*ds
, int port
, int sset
)
520 if (sset
!= ETH_SS_STATS
)
523 return ARRAY_SIZE(rtl83xx_mib
);
526 static int rtl83xx_port_enable(struct dsa_switch
*ds
, int port
,
527 struct phy_device
*phydev
)
529 struct rtl838x_switch_priv
*priv
= ds
->priv
;
532 pr_debug("%s: %x %d", __func__
, (u32
) priv
, port
);
533 priv
->ports
[port
].enable
= true;
535 /* enable inner tagging on egress, do not keep any tags */
536 if (priv
->family_id
== RTL9310_FAMILY_ID
)
537 sw_w32(BIT(4), priv
->r
->vlan_port_tag_sts_ctrl
+ (port
<< 2));
539 sw_w32(1, priv
->r
->vlan_port_tag_sts_ctrl
+ (port
<< 2));
541 if (dsa_is_cpu_port(ds
, port
))
544 /* add port to switch mask of CPU_PORT */
545 priv
->r
->traffic_enable(priv
->cpu_port
, port
);
547 /* add all other ports in the same bridge to switch mask of port */
548 v
= priv
->r
->traffic_get(port
);
549 v
|= priv
->ports
[port
].pm
;
550 priv
->r
->traffic_set(port
, v
);
552 sw_w32_mask(0, BIT(port
), RTL930X_L2_PORT_SABLK_CTRL
);
553 sw_w32_mask(0, BIT(port
), RTL930X_L2_PORT_DABLK_CTRL
);
558 static void rtl83xx_port_disable(struct dsa_switch
*ds
, int port
)
560 struct rtl838x_switch_priv
*priv
= ds
->priv
;
563 pr_debug("%s %x: %d", __func__
, (u32
)priv
, port
);
564 /* you can only disable user ports */
565 if (!dsa_is_user_port(ds
, port
))
568 // BUG: This does not work on RTL931X
569 /* remove port from switch mask of CPU_PORT */
570 priv
->r
->traffic_disable(priv
->cpu_port
, port
);
572 /* remove all other ports in the same bridge from switch mask of port */
573 v
= priv
->r
->traffic_get(port
);
574 v
&= ~priv
->ports
[port
].pm
;
575 priv
->r
->traffic_set(port
, v
);
577 priv
->ports
[port
].enable
= false;
580 static int rtl83xx_set_mac_eee(struct dsa_switch
*ds
, int port
,
581 struct ethtool_eee
*e
)
583 struct rtl838x_switch_priv
*priv
= ds
->priv
;
585 if (e
->eee_enabled
&& !priv
->eee_enabled
) {
586 pr_info("Globally enabling EEE\n");
587 priv
->r
->init_eee(priv
, true);
590 priv
->r
->port_eee_set(priv
, port
, e
->eee_enabled
);
593 pr_info("Enabled EEE for port %d\n", port
);
595 pr_info("Disabled EEE for port %d\n", port
);
599 static int rtl83xx_get_mac_eee(struct dsa_switch
*ds
, int port
,
600 struct ethtool_eee
*e
)
602 struct rtl838x_switch_priv
*priv
= ds
->priv
;
604 e
->supported
= SUPPORTED_100baseT_Full
| SUPPORTED_1000baseT_Full
;
606 priv
->r
->eee_port_ability(priv
, e
, port
);
608 e
->eee_enabled
= priv
->ports
[port
].eee_enabled
;
610 e
->eee_active
= !!(e
->advertised
& e
->lp_advertised
);
615 static int rtl93xx_get_mac_eee(struct dsa_switch
*ds
, int port
,
616 struct ethtool_eee
*e
)
618 struct rtl838x_switch_priv
*priv
= ds
->priv
;
620 e
->supported
= SUPPORTED_100baseT_Full
| SUPPORTED_1000baseT_Full
621 | SUPPORTED_2500baseX_Full
;
623 priv
->r
->eee_port_ability(priv
, e
, port
);
625 e
->eee_enabled
= priv
->ports
[port
].eee_enabled
;
627 e
->eee_active
= !!(e
->advertised
& e
->lp_advertised
);
633 * Set Switch L2 Aging time, t is time in milliseconds
634 * t = 0: aging is disabled
636 static int rtl83xx_set_l2aging(struct dsa_switch
*ds
, u32 t
)
638 struct rtl838x_switch_priv
*priv
= ds
->priv
;
639 int t_max
= priv
->family_id
== RTL8380_FAMILY_ID
? 0x7fffff : 0x1FFFFF;
641 /* Convert time in mseconds to internal value */
642 if (t
> 0x10000000) { /* Set to maximum */
645 if (priv
->family_id
== RTL8380_FAMILY_ID
)
646 t
= ((t
* 625) / 1000 + 127) / 128;
650 sw_w32(t
, priv
->r
->l2_ctrl_1
);
654 static int rtl83xx_port_bridge_join(struct dsa_switch
*ds
, int port
,
655 struct net_device
*bridge
)
657 struct rtl838x_switch_priv
*priv
= ds
->priv
;
658 u64 port_bitmap
= 1ULL << priv
->cpu_port
, v
;
661 pr_debug("%s %x: %d %llx", __func__
, (u32
)priv
, port
, port_bitmap
);
662 mutex_lock(&priv
->reg_mutex
);
663 for (i
= 0; i
< ds
->num_ports
; i
++) {
664 /* Add this port to the port matrix of the other ports in the
665 * same bridge. If the port is disabled, port matrix is kept
666 * and not being setup until the port becomes enabled.
668 if (dsa_is_user_port(ds
, i
) && i
!= port
) {
669 if (dsa_to_port(ds
, i
)->bridge_dev
!= bridge
)
671 if (priv
->ports
[i
].enable
)
672 priv
->r
->traffic_enable(i
, port
);
674 priv
->ports
[i
].pm
|= 1ULL << port
;
675 port_bitmap
|= 1ULL << i
;
679 /* Add all other ports to this port matrix. */
680 if (priv
->ports
[port
].enable
) {
681 priv
->r
->traffic_enable(priv
->cpu_port
, port
);
682 v
= priv
->r
->traffic_get(port
);
684 priv
->r
->traffic_set(port
, v
);
686 priv
->ports
[port
].pm
|= port_bitmap
;
687 mutex_unlock(&priv
->reg_mutex
);
692 static void rtl83xx_port_bridge_leave(struct dsa_switch
*ds
, int port
,
693 struct net_device
*bridge
)
695 struct rtl838x_switch_priv
*priv
= ds
->priv
;
696 u64 port_bitmap
= 1ULL << priv
->cpu_port
, v
;
699 pr_debug("%s %x: %d", __func__
, (u32
)priv
, port
);
700 mutex_lock(&priv
->reg_mutex
);
701 for (i
= 0; i
< ds
->num_ports
; i
++) {
702 /* Remove this port from the port matrix of the other ports
703 * in the same bridge. If the port is disabled, port matrix
704 * is kept and not being setup until the port becomes enabled.
705 * And the other port's port matrix cannot be broken when the
706 * other port is still a VLAN-aware port.
708 if (dsa_is_user_port(ds
, i
) && i
!= port
) {
709 if (dsa_to_port(ds
, i
)->bridge_dev
!= bridge
)
711 if (priv
->ports
[i
].enable
)
712 priv
->r
->traffic_disable(i
, port
);
714 priv
->ports
[i
].pm
|= 1ULL << port
;
715 port_bitmap
&= ~BIT_ULL(i
);
719 /* Add all other ports to this port matrix. */
720 if (priv
->ports
[port
].enable
) {
721 v
= priv
->r
->traffic_get(port
);
723 priv
->r
->traffic_set(port
, v
);
725 priv
->ports
[port
].pm
&= ~port_bitmap
;
727 mutex_unlock(&priv
->reg_mutex
);
730 void rtl83xx_port_stp_state_set(struct dsa_switch
*ds
, int port
, u8 state
)
736 struct rtl838x_switch_priv
*priv
= ds
->priv
;
737 int n
= priv
->port_width
<< 1;
739 /* Ports above or equal CPU port can never be configured */
740 if (port
>= priv
->cpu_port
)
743 mutex_lock(&priv
->reg_mutex
);
745 /* For the RTL839x and following, the bits are left-aligned, 838x and 930x
746 * have 64 bit fields, 839x and 931x have 128 bit fields
748 if (priv
->family_id
== RTL8390_FAMILY_ID
)
750 if (priv
->family_id
== RTL9300_FAMILY_ID
)
752 if (priv
->family_id
== RTL9310_FAMILY_ID
)
755 index
= n
- (pos
>> 4) - 1;
756 bit
= (pos
<< 1) % 32;
758 priv
->r
->stp_get(priv
, msti
, port_state
);
760 pr_debug("Current state, port %d: %d\n", port
, (port_state
[index
] >> bit
) & 3);
761 port_state
[index
] &= ~(3 << bit
);
764 case BR_STATE_DISABLED
: /* 0 */
765 port_state
[index
] |= (0 << bit
);
767 case BR_STATE_BLOCKING
: /* 4 */
768 case BR_STATE_LISTENING
: /* 1 */
769 port_state
[index
] |= (1 << bit
);
771 case BR_STATE_LEARNING
: /* 2 */
772 port_state
[index
] |= (2 << bit
);
774 case BR_STATE_FORWARDING
: /* 3*/
775 port_state
[index
] |= (3 << bit
);
780 priv
->r
->stp_set(priv
, msti
, port_state
);
782 mutex_unlock(&priv
->reg_mutex
);
785 void rtl83xx_fast_age(struct dsa_switch
*ds
, int port
)
787 struct rtl838x_switch_priv
*priv
= ds
->priv
;
788 int s
= priv
->family_id
== RTL8390_FAMILY_ID
? 2 : 0;
790 pr_debug("FAST AGE port %d\n", port
);
791 mutex_lock(&priv
->reg_mutex
);
792 /* RTL838X_L2_TBL_FLUSH_CTRL register bits, 839x has 1 bit larger
794 * 0-4: Replacing port
795 * 5-9: Flushed/replaced port
797 * 22: Entry types: 1: dynamic, 0: also static
798 * 23: Match flush port
800 * 25: Flush (0) or replace (1) L2 entries
801 * 26: Status of action (1: Start, 0: Done)
803 sw_w32(1 << (26 + s
) | 1 << (23 + s
) | port
<< (5 + (s
/ 2)), priv
->r
->l2_tbl_flush_ctrl
);
805 do { } while (sw_r32(priv
->r
->l2_tbl_flush_ctrl
) & BIT(26 + s
));
807 mutex_unlock(&priv
->reg_mutex
);
810 void rtl930x_fast_age(struct dsa_switch
*ds
, int port
)
812 struct rtl838x_switch_priv
*priv
= ds
->priv
;
814 pr_debug("FAST AGE port %d\n", port
);
815 mutex_lock(&priv
->reg_mutex
);
816 sw_w32(port
<< 11, RTL930X_L2_TBL_FLUSH_CTRL
+ 4);
818 sw_w32(BIT(26) | BIT(30), RTL930X_L2_TBL_FLUSH_CTRL
);
820 do { } while (sw_r32(priv
->r
->l2_tbl_flush_ctrl
) & BIT(30));
822 mutex_unlock(&priv
->reg_mutex
);
825 static int rtl83xx_vlan_filtering(struct dsa_switch
*ds
, int port
,
828 struct rtl838x_switch_priv
*priv
= ds
->priv
;
830 pr_debug("%s: port %d\n", __func__
, port
);
831 mutex_lock(&priv
->reg_mutex
);
833 if (vlan_filtering
) {
834 /* Enable ingress and egress filtering
835 * The VLAN_PORT_IGR_FILTER register uses 2 bits for each port to define
839 * 2: Trap packet to CPU port
840 * The Egress filter used 1 bit per state (0: DISABLED, 1: ENABLED)
842 if (port
!= priv
->cpu_port
)
843 sw_w32_mask(0b10 << ((port
% 16) << 1), 0b01 << ((port
% 16) << 1),
844 priv
->r
->vlan_port_igr_filter
+ ((port
>> 5) << 2));
845 sw_w32_mask(0, BIT(port
% 32), priv
->r
->vlan_port_egr_filter
+ ((port
>> 4) << 2));
847 /* Disable ingress and egress filtering */
848 if (port
!= priv
->cpu_port
)
849 sw_w32_mask(0b11 << ((port
% 16) << 1), 0,
850 priv
->r
->vlan_port_igr_filter
+ ((port
>> 5) << 2));
851 sw_w32_mask(BIT(port
% 32), 0, priv
->r
->vlan_port_egr_filter
+ ((port
>> 4) << 2));
854 /* Do we need to do something to the CPU-Port, too? */
855 mutex_unlock(&priv
->reg_mutex
);
860 static int rtl83xx_vlan_prepare(struct dsa_switch
*ds
, int port
,
861 const struct switchdev_obj_port_vlan
*vlan
)
863 struct rtl838x_vlan_info info
;
864 struct rtl838x_switch_priv
*priv
= ds
->priv
;
866 pr_info("%s: port %d\n", __func__
, port
);
868 mutex_lock(&priv
->reg_mutex
);
870 priv
->r
->vlan_profile_dump(1);
871 priv
->r
->vlan_tables_read(1, &info
);
873 pr_info("Tagged ports %llx, untag %llx, prof %x, MC# %d, UC# %d, FID %x\n",
874 info
.tagged_ports
, info
.untagged_ports
, info
.profile_id
,
875 info
.hash_mc_fid
, info
.hash_uc_fid
, info
.fid
);
877 priv
->r
->vlan_set_untagged(1, info
.untagged_ports
);
878 pr_debug("SET: Untagged ports, VLAN %d: %llx\n", 1, info
.untagged_ports
);
880 priv
->r
->vlan_set_tagged(1, &info
);
881 pr_debug("SET: Tagged ports, VLAN %d: %llx\n", 1, info
.tagged_ports
);
883 mutex_unlock(&priv
->reg_mutex
);
887 static void rtl83xx_vlan_add(struct dsa_switch
*ds
, int port
,
888 const struct switchdev_obj_port_vlan
*vlan
)
890 struct rtl838x_vlan_info info
;
891 struct rtl838x_switch_priv
*priv
= ds
->priv
;
894 pr_info("%s port %d, vid_end %d, vid_end %d, flags %x\n", __func__
,
895 port
, vlan
->vid_begin
, vlan
->vid_end
, vlan
->flags
);
897 if (vlan
->vid_begin
> 4095 || vlan
->vid_end
> 4095) {
898 dev_err(priv
->dev
, "VLAN out of range: %d - %d",
899 vlan
->vid_begin
, vlan
->vid_end
);
903 mutex_lock(&priv
->reg_mutex
);
905 if (vlan
->flags
& BRIDGE_VLAN_INFO_PVID
) {
906 for (v
= vlan
->vid_begin
; v
<= vlan
->vid_end
; v
++) {
909 /* Set both inner and outer PVID of the port */
910 sw_w32((v
<< 16) | v
<< 2, priv
->r
->vlan_port_pb
+ (port
<< 2));
911 priv
->ports
[port
].pvid
= vlan
->vid_end
;
915 for (v
= vlan
->vid_begin
; v
<= vlan
->vid_end
; v
++) {
919 /* Get port memberships of this vlan */
920 priv
->r
->vlan_tables_read(v
, &info
);
923 if (!info
.tagged_ports
) {
925 info
.hash_mc_fid
= false;
926 info
.hash_uc_fid
= false;
930 /* sanitize untagged_ports - must be a subset */
931 if (info
.untagged_ports
& ~info
.tagged_ports
)
932 info
.untagged_ports
= 0;
934 info
.tagged_ports
|= BIT_ULL(port
);
935 if (vlan
->flags
& BRIDGE_VLAN_INFO_UNTAGGED
)
936 info
.untagged_ports
|= BIT_ULL(port
);
938 priv
->r
->vlan_set_untagged(v
, info
.untagged_ports
);
939 pr_info("Untagged ports, VLAN %d: %llx\n", v
, info
.untagged_ports
);
941 priv
->r
->vlan_set_tagged(v
, &info
);
942 pr_info("Tagged ports, VLAN %d: %llx\n", v
, info
.tagged_ports
);
945 mutex_unlock(&priv
->reg_mutex
);
948 static int rtl83xx_vlan_del(struct dsa_switch
*ds
, int port
,
949 const struct switchdev_obj_port_vlan
*vlan
)
951 struct rtl838x_vlan_info info
;
952 struct rtl838x_switch_priv
*priv
= ds
->priv
;
956 pr_debug("%s: port %d, vid_end %d, vid_end %d, flags %x\n", __func__
,
957 port
, vlan
->vid_begin
, vlan
->vid_end
, vlan
->flags
);
959 if (vlan
->vid_begin
> 4095 || vlan
->vid_end
> 4095) {
960 dev_err(priv
->dev
, "VLAN out of range: %d - %d",
961 vlan
->vid_begin
, vlan
->vid_end
);
965 mutex_lock(&priv
->reg_mutex
);
966 pvid
= priv
->ports
[port
].pvid
;
968 for (v
= vlan
->vid_begin
; v
<= vlan
->vid_end
; v
++) {
969 /* Reset to default if removing the current PVID */
971 sw_w32(0, priv
->r
->vlan_port_pb
+ (port
<< 2));
973 /* Get port memberships of this vlan */
974 priv
->r
->vlan_tables_read(v
, &info
);
976 /* remove port from both tables */
977 info
.untagged_ports
&= (~BIT_ULL(port
));
978 /* always leave vid 1 */
980 info
.tagged_ports
&= (~BIT_ULL(port
));
982 priv
->r
->vlan_set_untagged(v
, info
.untagged_ports
);
983 pr_debug("Untagged ports, VLAN %d: %llx\n", v
, info
.untagged_ports
);
985 priv
->r
->vlan_set_tagged(v
, &info
);
986 pr_debug("Tagged ports, VLAN %d: %llx\n", v
, info
.tagged_ports
);
988 mutex_unlock(&priv
->reg_mutex
);
993 static int rtl83xx_port_fdb_add(struct dsa_switch
*ds
, int port
,
994 const unsigned char *addr
, u16 vid
)
996 struct rtl838x_switch_priv
*priv
= ds
->priv
;
997 u64 mac
= ether_addr_to_u64(addr
);
998 u32 key
= rtl83xx_hash_key(priv
, mac
, vid
);
999 struct rtl838x_l2_entry e
;
1002 int idx
= -1, err
= 0, i
;
1004 mutex_lock(&priv
->reg_mutex
);
1005 for (i
= 0; i
< 4; i
++) {
1006 entry
= priv
->r
->read_l2_entry_using_hash(key
, i
, &e
);
1008 idx
= (key
<< 2) | i
;
1011 if ((entry
& 0x0fffffffffffffffULL
) == ((mac
<< 12) | vid
)) {
1012 idx
= (key
<< 2) | i
;
1017 r
[0] = 3 << 17 | port
<< 12; // Aging and port
1020 r
[2] = (mac
& 0xffff) << 12; /* rvid = 0 */
1021 rtl83xx_write_hash(idx
, r
);
1025 /* Hash buckets full, try CAM */
1026 for (i
= 0; i
< 64; i
++) {
1027 entry
= priv
->r
->read_cam(i
, &e
);
1029 if (idx
< 0) /* First empty entry? */
1032 } else if ((entry
& 0x0fffffffffffffffULL
) == ((mac
<< 12) | vid
)) {
1033 pr_debug("Found entry in CAM\n");
1039 r
[0] = 3 << 17 | port
<< 12; // Aging
1042 r
[2] = (mac
& 0xffff) << 12; /* rvid = 0 */
1043 rtl83xx_write_cam(idx
, r
);
1048 mutex_unlock(&priv
->reg_mutex
);
1052 static int rtl83xx_port_fdb_del(struct dsa_switch
*ds
, int port
,
1053 const unsigned char *addr
, u16 vid
)
1055 struct rtl838x_switch_priv
*priv
= ds
->priv
;
1056 u64 mac
= ether_addr_to_u64(addr
);
1057 u32 key
= rtl83xx_hash_key(priv
, mac
, vid
);
1058 struct rtl838x_l2_entry e
;
1061 int idx
= -1, err
= 0, i
;
1063 pr_debug("In %s, mac %llx, vid: %d, key: %x08x\n", __func__
, mac
, vid
, key
);
1064 mutex_lock(&priv
->reg_mutex
);
1065 for (i
= 0; i
< 4; i
++) {
1066 entry
= priv
->r
->read_l2_entry_using_hash(key
, i
, &e
);
1069 if ((entry
& 0x0fffffffffffffffULL
) == ((mac
<< 12) | vid
)) {
1070 idx
= (key
<< 2) | i
;
1076 r
[0] = r
[1] = r
[2] = 0;
1077 rtl83xx_write_hash(idx
, r
);
1081 /* Check CAM for spillover from hash buckets */
1082 for (i
= 0; i
< 64; i
++) {
1083 entry
= priv
->r
->read_cam(i
, &e
);
1084 if ((entry
& 0x0fffffffffffffffULL
) == ((mac
<< 12) | vid
)) {
1090 r
[0] = r
[1] = r
[2] = 0;
1091 rtl83xx_write_cam(idx
, r
);
1096 mutex_unlock(&priv
->reg_mutex
);
1100 static int rtl83xx_port_fdb_dump(struct dsa_switch
*ds
, int port
,
1101 dsa_fdb_dump_cb_t
*cb
, void *data
)
1103 struct rtl838x_l2_entry e
;
1104 struct rtl838x_switch_priv
*priv
= ds
->priv
;
1110 mutex_lock(&priv
->reg_mutex
);
1112 for (i
= 0; i
< priv
->fib_entries
; i
++) {
1113 priv
->r
->read_l2_entry_using_hash(i
>> 2, i
& 0x3, &e
);
1118 if (e
.port
== port
) {
1119 fid
= (i
& 0x3ff) | (e
.rvid
& ~0x3ff);
1120 mac
= ether_addr_to_u64(&e
.mac
[0]);
1121 pkey
= rtl838x_hash(priv
, mac
<< 12 | fid
);
1122 fid
= (pkey
& 0x3ff) | (fid
& ~0x3ff);
1123 pr_debug("-> mac %016llx, fid: %d\n", mac
, fid
);
1124 cb(e
.mac
, e
.vid
, e
.is_static
, data
);
1128 for (i
= 0; i
< 64; i
++) {
1129 priv
->r
->read_cam(i
, &e
);
1135 cb(e
.mac
, e
.vid
, e
.is_static
, data
);
1138 mutex_unlock(&priv
->reg_mutex
);
1142 static int rtl83xx_port_mirror_add(struct dsa_switch
*ds
, int port
,
1143 struct dsa_mall_mirror_tc_entry
*mirror
,
1146 /* We support 4 mirror groups, one destination port per group */
1148 struct rtl838x_switch_priv
*priv
= ds
->priv
;
1149 int ctrl_reg
, dpm_reg
, spm_reg
;
1151 pr_debug("In %s\n", __func__
);
1153 for (group
= 0; group
< 4; group
++) {
1154 if (priv
->mirror_group_ports
[group
] == mirror
->to_local_port
)
1158 for (group
= 0; group
< 4; group
++) {
1159 if (priv
->mirror_group_ports
[group
] < 0)
1167 ctrl_reg
= priv
->r
->mir_ctrl
+ group
* 4;
1168 dpm_reg
= priv
->r
->mir_dpm
+ group
* 4 * priv
->port_width
;
1169 spm_reg
= priv
->r
->mir_spm
+ group
* 4 * priv
->port_width
;
1171 pr_debug("Using group %d\n", group
);
1172 mutex_lock(&priv
->reg_mutex
);
1174 if (priv
->family_id
== RTL8380_FAMILY_ID
) {
1175 /* Enable mirroring to port across VLANs (bit 11) */
1176 sw_w32(1 << 11 | (mirror
->to_local_port
<< 4) | 1, ctrl_reg
);
1178 /* Enable mirroring to destination port */
1179 sw_w32((mirror
->to_local_port
<< 4) | 1, ctrl_reg
);
1182 if (ingress
&& (priv
->r
->get_port_reg_be(spm_reg
) & (1ULL << port
))) {
1183 mutex_unlock(&priv
->reg_mutex
);
1186 if ((!ingress
) && (priv
->r
->get_port_reg_be(dpm_reg
) & (1ULL << port
))) {
1187 mutex_unlock(&priv
->reg_mutex
);
1192 priv
->r
->mask_port_reg_be(0, 1ULL << port
, spm_reg
);
1194 priv
->r
->mask_port_reg_be(0, 1ULL << port
, dpm_reg
);
1196 priv
->mirror_group_ports
[group
] = mirror
->to_local_port
;
1197 mutex_unlock(&priv
->reg_mutex
);
1201 static void rtl83xx_port_mirror_del(struct dsa_switch
*ds
, int port
,
1202 struct dsa_mall_mirror_tc_entry
*mirror
)
1205 struct rtl838x_switch_priv
*priv
= ds
->priv
;
1206 int ctrl_reg
, dpm_reg
, spm_reg
;
1208 pr_debug("In %s\n", __func__
);
1209 for (group
= 0; group
< 4; group
++) {
1210 if (priv
->mirror_group_ports
[group
] == mirror
->to_local_port
)
1216 ctrl_reg
= priv
->r
->mir_ctrl
+ group
* 4;
1217 dpm_reg
= priv
->r
->mir_dpm
+ group
* 4 * priv
->port_width
;
1218 spm_reg
= priv
->r
->mir_spm
+ group
* 4 * priv
->port_width
;
1220 mutex_lock(&priv
->reg_mutex
);
1221 if (mirror
->ingress
) {
1222 /* Ingress, clear source port matrix */
1223 priv
->r
->mask_port_reg_be(1ULL << port
, 0, spm_reg
);
1225 /* Egress, clear destination port matrix */
1226 priv
->r
->mask_port_reg_be(1ULL << port
, 0, dpm_reg
);
1229 if (!(sw_r32(spm_reg
) || sw_r32(dpm_reg
))) {
1230 priv
->mirror_group_ports
[group
] = -1;
1231 sw_w32(0, ctrl_reg
);
1234 mutex_unlock(&priv
->reg_mutex
);
1237 int dsa_phy_read(struct dsa_switch
*ds
, int phy_addr
, int phy_reg
)
1241 struct rtl838x_switch_priv
*priv
= ds
->priv
;
1243 if (phy_addr
>= 24 && phy_addr
<= 27
1244 && priv
->ports
[24].phy
== PHY_RTL838X_SDS
) {
1247 val
= sw_r32(RTL838X_SDS4_FIB_REG0
+ offset
+ (phy_reg
<< 2)) & 0xffff;
1251 read_phy(phy_addr
, 0, phy_reg
, &val
);
1255 int dsa_phy_write(struct dsa_switch
*ds
, int phy_addr
, int phy_reg
, u16 val
)
1258 struct rtl838x_switch_priv
*priv
= ds
->priv
;
1260 if (phy_addr
>= 24 && phy_addr
<= 27
1261 && priv
->ports
[24].phy
== PHY_RTL838X_SDS
) {
1264 sw_w32(val
, RTL838X_SDS4_FIB_REG0
+ offset
+ (phy_reg
<< 2));
1267 return write_phy(phy_addr
, 0, phy_reg
, val
);
1270 const struct dsa_switch_ops rtl83xx_switch_ops
= {
1271 .get_tag_protocol
= rtl83xx_get_tag_protocol
,
1272 .setup
= rtl83xx_setup
,
1274 .phy_read
= dsa_phy_read
,
1275 .phy_write
= dsa_phy_write
,
1277 .phylink_validate
= rtl83xx_phylink_validate
,
1278 .phylink_mac_link_state
= rtl83xx_phylink_mac_link_state
,
1279 .phylink_mac_config
= rtl83xx_phylink_mac_config
,
1280 .phylink_mac_link_down
= rtl83xx_phylink_mac_link_down
,
1281 .phylink_mac_link_up
= rtl83xx_phylink_mac_link_up
,
1283 .get_strings
= rtl83xx_get_strings
,
1284 .get_ethtool_stats
= rtl83xx_get_ethtool_stats
,
1285 .get_sset_count
= rtl83xx_get_sset_count
,
1287 .port_enable
= rtl83xx_port_enable
,
1288 .port_disable
= rtl83xx_port_disable
,
1290 .get_mac_eee
= rtl83xx_get_mac_eee
,
1291 .set_mac_eee
= rtl83xx_set_mac_eee
,
1293 .set_ageing_time
= rtl83xx_set_l2aging
,
1294 .port_bridge_join
= rtl83xx_port_bridge_join
,
1295 .port_bridge_leave
= rtl83xx_port_bridge_leave
,
1296 .port_stp_state_set
= rtl83xx_port_stp_state_set
,
1297 .port_fast_age
= rtl83xx_fast_age
,
1299 .port_vlan_filtering
= rtl83xx_vlan_filtering
,
1300 .port_vlan_prepare
= rtl83xx_vlan_prepare
,
1301 .port_vlan_add
= rtl83xx_vlan_add
,
1302 .port_vlan_del
= rtl83xx_vlan_del
,
1304 .port_fdb_add
= rtl83xx_port_fdb_add
,
1305 .port_fdb_del
= rtl83xx_port_fdb_del
,
1306 .port_fdb_dump
= rtl83xx_port_fdb_dump
,
1308 .port_mirror_add
= rtl83xx_port_mirror_add
,
1309 .port_mirror_del
= rtl83xx_port_mirror_del
,
1312 const struct dsa_switch_ops rtl930x_switch_ops
= {
1313 .get_tag_protocol
= rtl83xx_get_tag_protocol
,
1314 .setup
= rtl930x_setup
,
1316 .phy_read
= dsa_phy_read
,
1317 .phy_write
= dsa_phy_write
,
1319 .phylink_validate
= rtl83xx_phylink_validate
,
1320 .phylink_mac_link_state
= rtl83xx_phylink_mac_link_state
,
1321 .phylink_mac_config
= rtl83xx_phylink_mac_config
,
1322 .phylink_mac_link_down
= rtl83xx_phylink_mac_link_down
,
1323 .phylink_mac_link_up
= rtl83xx_phylink_mac_link_up
,
1325 .get_strings
= rtl83xx_get_strings
,
1326 .get_ethtool_stats
= rtl83xx_get_ethtool_stats
,
1327 .get_sset_count
= rtl83xx_get_sset_count
,
1329 .port_enable
= rtl83xx_port_enable
,
1330 .port_disable
= rtl83xx_port_disable
,
1332 .get_mac_eee
= rtl93xx_get_mac_eee
,
1333 .set_mac_eee
= rtl83xx_set_mac_eee
,
1335 .set_ageing_time
= rtl83xx_set_l2aging
,
1336 .port_bridge_join
= rtl83xx_port_bridge_join
,
1337 .port_bridge_leave
= rtl83xx_port_bridge_leave
,
1338 .port_stp_state_set
= rtl83xx_port_stp_state_set
,
1339 .port_fast_age
= rtl930x_fast_age
,
1341 .port_vlan_filtering
= rtl83xx_vlan_filtering
,
1342 .port_vlan_prepare
= rtl83xx_vlan_prepare
,
1343 .port_vlan_add
= rtl83xx_vlan_add
,
1344 .port_vlan_del
= rtl83xx_vlan_del
,
1346 .port_fdb_add
= rtl83xx_port_fdb_add
,
1347 .port_fdb_del
= rtl83xx_port_fdb_del
,
1348 .port_fdb_dump
= rtl83xx_port_fdb_dump
,