2 Copyright (c) 2014, Matthias Schiffer <mschiffer@universe-factory.net>
5 Redistribution and use in source and binary forms, with or without
6 modification, are permitted provided that the following conditions are met:
8 1. Redistributions of source code must retain the above copyright notice,
9 this list of conditions and the following disclaimer.
10 2. Redistributions in binary form must reproduce the above copyright notice,
11 this list of conditions and the following disclaimer in the documentation
12 and/or other materials provided with the distribution.
14 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
15 AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16 IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
17 DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
18 FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19 DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
20 SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
21 CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
22 OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
23 OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
30 Image generation tool for the TP-LINK SafeLoader as seen on
31 TP-LINK Pharos devices (CPE210/220/510/520)
45 #include <arpa/inet.h>
47 #include <sys/types.h>
54 #define ALIGN(x,a) ({ typeof(a) __a = (a); (((x) + __a - 1) & ~(__a - 1)); })
57 #define MAX_PARTITIONS 32
59 /** An image partition table entry */
60 struct image_partition_entry
{
66 /** A flash partition table entry */
67 struct flash_partition_entry
{
73 /** Firmware layout description */
77 const char *support_list
;
80 struct flash_partition_entry partitions
[MAX_PARTITIONS
+1];
81 const char *first_sysupgrade_partition
;
82 const char *last_sysupgrade_partition
;
85 /** The content of the soft-version structure */
86 struct __attribute__((__packed__
)) soft_version
{
90 uint8_t version_major
;
91 uint8_t version_minor
;
92 uint8_t version_patch
;
102 static const uint8_t jffs2_eof_mark
[4] = {0xde, 0xad, 0xc0, 0xde};
106 Salt for the MD5 hash
108 Fortunately, TP-LINK seems to use the same salt for most devices which use
109 the new image format.
111 static const uint8_t md5_salt
[16] = {
112 0x7a, 0x2b, 0x15, 0xed,
113 0x9b, 0x98, 0x59, 0x6d,
114 0xe5, 0x04, 0xab, 0x44,
115 0xac, 0x2a, 0x9f, 0x4e,
119 /** Firmware layout table */
120 static struct device_info boards
[] = {
121 /** Firmware layout for the CPE210/220 V1 */
124 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
127 "CPE210(TP-LINK|UN|N300-2):1.0\r\n"
128 "CPE210(TP-LINK|UN|N300-2):1.1\r\n"
129 "CPE210(TP-LINK|US|N300-2):1.1\r\n"
130 "CPE210(TP-LINK|EU|N300-2):1.1\r\n"
131 "CPE220(TP-LINK|UN|N300-2):1.1\r\n"
132 "CPE220(TP-LINK|US|N300-2):1.1\r\n"
133 "CPE220(TP-LINK|EU|N300-2):1.1\r\n",
134 .support_trail
= '\xff',
138 {"fs-uboot", 0x00000, 0x20000},
139 {"partition-table", 0x20000, 0x02000},
140 {"default-mac", 0x30000, 0x00020},
141 {"product-info", 0x31100, 0x00100},
142 {"signature", 0x32000, 0x00400},
143 {"os-image", 0x40000, 0x200000},
144 {"file-system", 0x240000, 0x570000},
145 {"soft-version", 0x7b0000, 0x00100},
146 {"support-list", 0x7b1000, 0x00400},
147 {"user-config", 0x7c0000, 0x10000},
148 {"default-config", 0x7d0000, 0x10000},
149 {"log", 0x7e0000, 0x10000},
150 {"radio", 0x7f0000, 0x10000},
154 .first_sysupgrade_partition
= "os-image",
155 .last_sysupgrade_partition
= "support-list",
158 /** Firmware layout for the CPE210 V2 */
161 .vendor
= "CPE210(TP-LINK|UN|N300-2|00000000):2.0\r\n",
164 "CPE210(TP-LINK|EU|N300-2|00000000):2.0\r\n"
165 "CPE210(TP-LINK|EU|N300-2|45550000):2.0\r\n"
166 "CPE210(TP-LINK|EU|N300-2|55530000):2.0\r\n"
167 "CPE210(TP-LINK|UN|N300-2|00000000):2.0\r\n"
168 "CPE210(TP-LINK|UN|N300-2|45550000):2.0\r\n"
169 "CPE210(TP-LINK|UN|N300-2|55530000):2.0\r\n"
170 "CPE210(TP-LINK|US|N300-2|55530000):2.0\r\n"
171 "CPE210(TP-LINK|UN|N300-2):2.0\r\n"
172 "CPE210(TP-LINK|EU|N300-2):2.0\r\n"
173 "CPE210(TP-LINK|US|N300-2):2.0\r\n",
174 .support_trail
= '\xff',
178 {"fs-uboot", 0x00000, 0x20000},
179 {"partition-table", 0x20000, 0x02000},
180 {"default-mac", 0x30000, 0x00020},
181 {"product-info", 0x31100, 0x00100},
182 {"device-info", 0x31400, 0x00400},
183 {"signature", 0x32000, 0x00400},
184 {"device-id", 0x33000, 0x00100},
185 {"firmware", 0x40000, 0x770000},
186 {"soft-version", 0x7b0000, 0x00100},
187 {"support-list", 0x7b1000, 0x01000},
188 {"user-config", 0x7c0000, 0x10000},
189 {"default-config", 0x7d0000, 0x10000},
190 {"log", 0x7e0000, 0x10000},
191 {"radio", 0x7f0000, 0x10000},
195 .first_sysupgrade_partition
= "os-image",
196 .last_sysupgrade_partition
= "support-list",
199 /** Firmware layout for the CPE210 V3 */
202 .vendor
= "CPE210(TP-LINK|UN|N300-2|00000000):3.0\r\n",
205 "CPE210(TP-LINK|EU|N300-2|45550000):3.0\r\n"
206 "CPE210(TP-LINK|UN|N300-2|00000000):3.0\r\n"
207 "CPE210(TP-LINK|UN|N300-2):3.0\r\n"
208 "CPE210(TP-LINK|EU|N300-2):3.0\r\n",
209 .support_trail
= '\xff',
213 {"fs-uboot", 0x00000, 0x20000},
214 {"partition-table", 0x20000, 0x01000},
215 {"default-mac", 0x30000, 0x00020},
216 {"product-info", 0x31100, 0x00100},
217 {"device-info", 0x31400, 0x00400},
218 {"signature", 0x32000, 0x00400},
219 {"device-id", 0x33000, 0x00100},
220 {"firmware", 0x40000, 0x770000},
221 {"soft-version", 0x7b0000, 0x00100},
222 {"support-list", 0x7b1000, 0x01000},
223 {"user-config", 0x7c0000, 0x10000},
224 {"default-config", 0x7d0000, 0x10000},
225 {"log", 0x7e0000, 0x10000},
226 {"radio", 0x7f0000, 0x10000},
230 .first_sysupgrade_partition
= "os-image",
231 .last_sysupgrade_partition
= "support-list",
234 /** Firmware layout for the CPE220 V2 */
237 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
240 "CPE220(TP-LINK|EU|N300-2|00000000):2.0\r\n"
241 "CPE220(TP-LINK|EU|N300-2|45550000):2.0\r\n"
242 "CPE220(TP-LINK|EU|N300-2|55530000):2.0\r\n"
243 "CPE220(TP-LINK|UN|N300-2|00000000):2.0\r\n"
244 "CPE220(TP-LINK|UN|N300-2|45550000):2.0\r\n"
245 "CPE220(TP-LINK|UN|N300-2|55530000):2.0\r\n"
246 "CPE220(TP-LINK|US|N300-2|55530000):2.0\r\n"
247 "CPE220(TP-LINK|UN|N300-2):2.0\r\n"
248 "CPE220(TP-LINK|EU|N300-2):2.0\r\n"
249 "CPE220(TP-LINK|US|N300-2):2.0\r\n",
250 .support_trail
= '\xff',
254 {"fs-uboot", 0x00000, 0x20000},
255 {"partition-table", 0x20000, 0x02000},
256 {"default-mac", 0x30000, 0x00020},
257 {"product-info", 0x31100, 0x00100},
258 {"signature", 0x32000, 0x00400},
259 {"os-image", 0x40000, 0x200000},
260 {"file-system", 0x240000, 0x570000},
261 {"soft-version", 0x7b0000, 0x00100},
262 {"support-list", 0x7b1000, 0x00400},
263 {"user-config", 0x7c0000, 0x10000},
264 {"default-config", 0x7d0000, 0x10000},
265 {"log", 0x7e0000, 0x10000},
266 {"radio", 0x7f0000, 0x10000},
270 .first_sysupgrade_partition
= "os-image",
271 .last_sysupgrade_partition
= "support-list",
274 /** Firmware layout for the CPE220 V3 */
277 .vendor
= "CPE220(TP-LINK|UN|N300-2|00000000):3.0\r\n",
280 "CPE220(TP-LINK|EU|N300-2|00000000):3.0\r\n"
281 "CPE220(TP-LINK|EU|N300-2|45550000):3.0\r\n"
282 "CPE220(TP-LINK|EU|N300-2|55530000):3.0\r\n"
283 "CPE220(TP-LINK|UN|N300-2|00000000):3.0\r\n"
284 "CPE220(TP-LINK|UN|N300-2|45550000):3.0\r\n"
285 "CPE220(TP-LINK|UN|N300-2|55530000):3.0\r\n"
286 "CPE220(TP-LINK|US|N300-2|55530000):3.0\r\n"
287 "CPE220(TP-LINK|UN|N300-2):3.0\r\n"
288 "CPE220(TP-LINK|EU|N300-2):3.0\r\n"
289 "CPE220(TP-LINK|US|N300-2):3.0\r\n",
290 .support_trail
= '\xff',
294 {"fs-uboot", 0x00000, 0x20000},
295 {"partition-table", 0x20000, 0x02000},
296 {"default-mac", 0x30000, 0x00020},
297 {"product-info", 0x31100, 0x00100},
298 {"device-info", 0x31400, 0x00400},
299 {"signature", 0x32000, 0x00400},
300 {"device-id", 0x33000, 0x00100},
301 {"firmware", 0x40000, 0x770000},
302 {"soft-version", 0x7b0000, 0x00100},
303 {"support-list", 0x7b1000, 0x01000},
304 {"user-config", 0x7c0000, 0x10000},
305 {"default-config", 0x7d0000, 0x10000},
306 {"log", 0x7e0000, 0x10000},
307 {"radio", 0x7f0000, 0x10000},
311 .first_sysupgrade_partition
= "os-image",
312 .last_sysupgrade_partition
= "support-list",
315 /** Firmware layout for the CPE510/520 V1 */
318 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
321 "CPE510(TP-LINK|UN|N300-5):1.0\r\n"
322 "CPE510(TP-LINK|UN|N300-5):1.1\r\n"
323 "CPE510(TP-LINK|UN|N300-5):1.1\r\n"
324 "CPE510(TP-LINK|US|N300-5):1.1\r\n"
325 "CPE510(TP-LINK|EU|N300-5):1.1\r\n"
326 "CPE520(TP-LINK|UN|N300-5):1.1\r\n"
327 "CPE520(TP-LINK|US|N300-5):1.1\r\n"
328 "CPE520(TP-LINK|EU|N300-5):1.1\r\n",
329 .support_trail
= '\xff',
333 {"fs-uboot", 0x00000, 0x20000},
334 {"partition-table", 0x20000, 0x02000},
335 {"default-mac", 0x30000, 0x00020},
336 {"product-info", 0x31100, 0x00100},
337 {"signature", 0x32000, 0x00400},
338 {"os-image", 0x40000, 0x200000},
339 {"file-system", 0x240000, 0x570000},
340 {"soft-version", 0x7b0000, 0x00100},
341 {"support-list", 0x7b1000, 0x00400},
342 {"user-config", 0x7c0000, 0x10000},
343 {"default-config", 0x7d0000, 0x10000},
344 {"log", 0x7e0000, 0x10000},
345 {"radio", 0x7f0000, 0x10000},
349 .first_sysupgrade_partition
= "os-image",
350 .last_sysupgrade_partition
= "support-list",
353 /** Firmware layout for the CPE510 V2 */
356 .vendor
= "CPE510(TP-LINK|UN|N300-5):2.0\r\n",
359 "CPE510(TP-LINK|EU|N300-5|00000000):2.0\r\n"
360 "CPE510(TP-LINK|EU|N300-5|45550000):2.0\r\n"
361 "CPE510(TP-LINK|EU|N300-5|55530000):2.0\r\n"
362 "CPE510(TP-LINK|UN|N300-5|00000000):2.0\r\n"
363 "CPE510(TP-LINK|UN|N300-5|45550000):2.0\r\n"
364 "CPE510(TP-LINK|UN|N300-5|55530000):2.0\r\n"
365 "CPE510(TP-LINK|US|N300-5|00000000):2.0\r\n"
366 "CPE510(TP-LINK|US|N300-5|45550000):2.0\r\n"
367 "CPE510(TP-LINK|US|N300-5|55530000):2.0\r\n"
368 "CPE510(TP-LINK|UN|N300-5):2.0\r\n"
369 "CPE510(TP-LINK|EU|N300-5):2.0\r\n"
370 "CPE510(TP-LINK|US|N300-5):2.0\r\n",
371 .support_trail
= '\xff',
375 {"fs-uboot", 0x00000, 0x20000},
376 {"partition-table", 0x20000, 0x02000},
377 {"default-mac", 0x30000, 0x00020},
378 {"product-info", 0x31100, 0x00100},
379 {"signature", 0x32000, 0x00400},
380 {"os-image", 0x40000, 0x200000},
381 {"file-system", 0x240000, 0x570000},
382 {"soft-version", 0x7b0000, 0x00100},
383 {"support-list", 0x7b1000, 0x00400},
384 {"user-config", 0x7c0000, 0x10000},
385 {"default-config", 0x7d0000, 0x10000},
386 {"log", 0x7e0000, 0x10000},
387 {"radio", 0x7f0000, 0x10000},
391 .first_sysupgrade_partition
= "os-image",
392 .last_sysupgrade_partition
= "support-list",
395 /** Firmware layout for the CPE510 V3 */
398 .vendor
= "CPE510(TP-LINK|UN|N300-5):3.0\r\n",
401 "CPE510(TP-LINK|EU|N300-5|00000000):3.0\r\n"
402 "CPE510(TP-LINK|EU|N300-5|45550000):3.0\r\n"
403 "CPE510(TP-LINK|EU|N300-5|55530000):3.0\r\n"
404 "CPE510(TP-LINK|UN|N300-5|00000000):3.0\r\n"
405 "CPE510(TP-LINK|UN|N300-5|45550000):3.0\r\n"
406 "CPE510(TP-LINK|UN|N300-5|55530000):3.0\r\n"
407 "CPE510(TP-LINK|US|N300-5|00000000):3.0\r\n"
408 "CPE510(TP-LINK|US|N300-5|45550000):3.0\r\n"
409 "CPE510(TP-LINK|US|N300-5|55530000):3.0\r\n"
410 "CPE510(TP-LINK|UN|N300-5):3.0\r\n"
411 "CPE510(TP-LINK|EU|N300-5):3.0\r\n"
412 "CPE510(TP-LINK|US|N300-5):3.0\r\n",
413 .support_trail
= '\xff',
417 {"fs-uboot", 0x00000, 0x20000},
418 {"partition-table", 0x20000, 0x02000},
419 {"default-mac", 0x30000, 0x00020},
420 {"product-info", 0x31100, 0x00100},
421 {"signature", 0x32000, 0x00400},
422 {"os-image", 0x40000, 0x200000},
423 {"file-system", 0x240000, 0x570000},
424 {"soft-version", 0x7b0000, 0x00100},
425 {"support-list", 0x7b1000, 0x00400},
426 {"user-config", 0x7c0000, 0x10000},
427 {"default-config", 0x7d0000, 0x10000},
428 {"log", 0x7e0000, 0x10000},
429 {"radio", 0x7f0000, 0x10000},
433 .first_sysupgrade_partition
= "os-image",
434 .last_sysupgrade_partition
= "support-list",
437 /** Firmware layout for the CPE610V1 */
440 .vendor
= "CPE610(TP-LINK|UN|N300-5|00000000):1.0\r\n",
443 "CPE610(TP-LINK|EU|N300-5|00000000):1.0\r\n"
444 "CPE610(TP-LINK|EU|N300-5|45550000):1.0\r\n"
445 "CPE610(TP-LINK|EU|N300-5|55530000):1.0\r\n"
446 "CPE610(TP-LINK|UN|N300-5|00000000):1.0\r\n"
447 "CPE610(TP-LINK|UN|N300-5|45550000):1.0\r\n"
448 "CPE610(TP-LINK|UN|N300-5|55530000):1.0\r\n"
449 "CPE610(TP-LINK|US|N300-5|55530000):1.0\r\n"
450 "CPE610(TP-LINK|UN|N300-5):1.0\r\n"
451 "CPE610(TP-LINK|EU|N300-5):1.0\r\n"
452 "CPE610(TP-LINK|US|N300-5):1.0\r\n",
453 .support_trail
= '\xff',
457 {"fs-uboot", 0x00000, 0x20000},
458 {"partition-table", 0x20000, 0x02000},
459 {"default-mac", 0x30000, 0x00020},
460 {"product-info", 0x31100, 0x00100},
461 {"signature", 0x32000, 0x00400},
462 {"os-image", 0x40000, 0x200000},
463 {"file-system", 0x240000, 0x570000},
464 {"soft-version", 0x7b0000, 0x00100},
465 {"support-list", 0x7b1000, 0x00400},
466 {"user-config", 0x7c0000, 0x10000},
467 {"default-config", 0x7d0000, 0x10000},
468 {"log", 0x7e0000, 0x10000},
469 {"radio", 0x7f0000, 0x10000},
473 .first_sysupgrade_partition
= "os-image",
474 .last_sysupgrade_partition
= "support-list",
479 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
482 "WBS210(TP-LINK|UN|N300-2):1.20\r\n"
483 "WBS210(TP-LINK|US|N300-2):1.20\r\n"
484 "WBS210(TP-LINK|EU|N300-2):1.20\r\n",
485 .support_trail
= '\xff',
489 {"fs-uboot", 0x00000, 0x20000},
490 {"partition-table", 0x20000, 0x02000},
491 {"default-mac", 0x30000, 0x00020},
492 {"product-info", 0x31100, 0x00100},
493 {"signature", 0x32000, 0x00400},
494 {"os-image", 0x40000, 0x200000},
495 {"file-system", 0x240000, 0x570000},
496 {"soft-version", 0x7b0000, 0x00100},
497 {"support-list", 0x7b1000, 0x00400},
498 {"user-config", 0x7c0000, 0x10000},
499 {"default-config", 0x7d0000, 0x10000},
500 {"log", 0x7e0000, 0x10000},
501 {"radio", 0x7f0000, 0x10000},
505 .first_sysupgrade_partition
= "os-image",
506 .last_sysupgrade_partition
= "support-list",
511 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
514 "WBS210(TP-LINK|UN|N300-2|00000000):2.0\r\n"
515 "WBS210(TP-LINK|US|N300-2|55530000):2.0\r\n"
516 "WBS210(TP-LINK|EU|N300-2|45550000):2.0\r\n",
517 .support_trail
= '\xff',
521 {"fs-uboot", 0x00000, 0x20000},
522 {"partition-table", 0x20000, 0x02000},
523 {"default-mac", 0x30000, 0x00020},
524 {"product-info", 0x31100, 0x00100},
525 {"signature", 0x32000, 0x00400},
526 {"os-image", 0x40000, 0x200000},
527 {"file-system", 0x240000, 0x570000},
528 {"soft-version", 0x7b0000, 0x00100},
529 {"support-list", 0x7b1000, 0x00400},
530 {"user-config", 0x7c0000, 0x10000},
531 {"default-config", 0x7d0000, 0x10000},
532 {"log", 0x7e0000, 0x10000},
533 {"radio", 0x7f0000, 0x10000},
537 .first_sysupgrade_partition
= "os-image",
538 .last_sysupgrade_partition
= "support-list",
543 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
546 "WBS510(TP-LINK|UN|N300-5):1.20\r\n"
547 "WBS510(TP-LINK|US|N300-5):1.20\r\n"
548 "WBS510(TP-LINK|EU|N300-5):1.20\r\n"
549 "WBS510(TP-LINK|CA|N300-5):1.20\r\n",
550 .support_trail
= '\xff',
554 {"fs-uboot", 0x00000, 0x20000},
555 {"partition-table", 0x20000, 0x02000},
556 {"default-mac", 0x30000, 0x00020},
557 {"product-info", 0x31100, 0x00100},
558 {"signature", 0x32000, 0x00400},
559 {"os-image", 0x40000, 0x200000},
560 {"file-system", 0x240000, 0x570000},
561 {"soft-version", 0x7b0000, 0x00100},
562 {"support-list", 0x7b1000, 0x00400},
563 {"user-config", 0x7c0000, 0x10000},
564 {"default-config", 0x7d0000, 0x10000},
565 {"log", 0x7e0000, 0x10000},
566 {"radio", 0x7f0000, 0x10000},
570 .first_sysupgrade_partition
= "os-image",
571 .last_sysupgrade_partition
= "support-list",
576 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
579 "WBS510(TP-LINK|UN|N300-5|00000000):2.0\r\n"
580 "WBS510(TP-LINK|US|N300-5|55530000):2.0\r\n"
581 "WBS510(TP-LINK|EU|N300-5|45550000):2.0\r\n"
582 "WBS510(TP-LINK|CA|N300-5|43410000):2.0\r\n",
583 .support_trail
= '\xff',
587 {"fs-uboot", 0x00000, 0x20000},
588 {"partition-table", 0x20000, 0x02000},
589 {"default-mac", 0x30000, 0x00020},
590 {"product-info", 0x31100, 0x00100},
591 {"signature", 0x32000, 0x00400},
592 {"os-image", 0x40000, 0x200000},
593 {"file-system", 0x240000, 0x570000},
594 {"soft-version", 0x7b0000, 0x00100},
595 {"support-list", 0x7b1000, 0x00400},
596 {"user-config", 0x7c0000, 0x10000},
597 {"default-config", 0x7d0000, 0x10000},
598 {"log", 0x7e0000, 0x10000},
599 {"radio", 0x7f0000, 0x10000},
603 .first_sysupgrade_partition
= "os-image",
604 .last_sysupgrade_partition
= "support-list",
607 /** Firmware layout for the C2600 */
613 "{product_name:Archer C2600,product_ver:1.0.0,special_id:00000000}\r\n",
614 .support_trail
= '\x00',
618 We use a bigger os-image partition than the stock images (and thus
619 smaller file-system), as our kernel doesn't fit in the stock firmware's
620 2 MB os-image since kernel 4.14.
623 {"SBL1", 0x00000, 0x20000},
624 {"MIBIB", 0x20000, 0x20000},
625 {"SBL2", 0x40000, 0x20000},
626 {"SBL3", 0x60000, 0x30000},
627 {"DDRCONFIG", 0x90000, 0x10000},
628 {"SSD", 0xa0000, 0x10000},
629 {"TZ", 0xb0000, 0x30000},
630 {"RPM", 0xe0000, 0x20000},
631 {"fs-uboot", 0x100000, 0x70000},
632 {"uboot-env", 0x170000, 0x40000},
633 {"radio", 0x1b0000, 0x40000},
634 {"os-image", 0x1f0000, 0x400000}, /* Stock: base 0x1f0000 size 0x200000 */
635 {"file-system", 0x5f0000, 0x1900000}, /* Stock: base 0x3f0000 size 0x1b00000 */
636 {"default-mac", 0x1ef0000, 0x00200},
637 {"pin", 0x1ef0200, 0x00200},
638 {"product-info", 0x1ef0400, 0x0fc00},
639 {"partition-table", 0x1f00000, 0x10000},
640 {"soft-version", 0x1f10000, 0x10000},
641 {"support-list", 0x1f20000, 0x10000},
642 {"profile", 0x1f30000, 0x10000},
643 {"default-config", 0x1f40000, 0x10000},
644 {"user-config", 0x1f50000, 0x40000},
645 {"qos-db", 0x1f90000, 0x40000},
646 {"usb-config", 0x1fd0000, 0x10000},
647 {"log", 0x1fe0000, 0x20000},
651 .first_sysupgrade_partition
= "os-image",
652 .last_sysupgrade_partition
= "file-system"
655 /** Firmware layout for the A7-V5 */
657 .id
= "ARCHER-A7-V5",
660 "{product_name:Archer A7,product_ver:5.0.0,special_id:45550000}\n"
661 "{product_name:Archer A7,product_ver:5.0.0,special_id:55530000}\n"
662 "{product_name:Archer A7,product_ver:5.0.0,special_id:43410000}\n"
663 "{product_name:Archer A7,product_ver:5.0.0,special_id:4A500000}\n"
664 "{product_name:Archer A7,product_ver:5.0.0,special_id:54570000}\n",
665 .support_trail
= '\x00',
666 .soft_ver
= "soft_ver:1.0.0\n",
668 /* We're using a dynamic kernel/rootfs split here */
670 {"factory-boot", 0x00000, 0x20000},
671 {"fs-uboot", 0x20000, 0x20000},
672 {"firmware", 0x40000, 0xec0000}, /* Stock: name os-image base 0x40000 size 0x120000 */
673 /* Stock: name file-system base 0x160000 size 0xda0000 */
674 {"default-mac", 0xf40000, 0x00200},
675 {"pin", 0xf40200, 0x00200},
676 {"device-id", 0xf40400, 0x00100},
677 {"product-info", 0xf40500, 0x0fb00},
678 {"soft-version", 0xf50000, 0x00100},
679 {"extra-para", 0xf51000, 0x01000},
680 {"support-list", 0xf52000, 0x0a000},
681 {"profile", 0xf5c000, 0x04000},
682 {"default-config", 0xf60000, 0x10000},
683 {"user-config", 0xf70000, 0x40000},
684 {"certificate", 0xfb0000, 0x10000},
685 {"partition-table", 0xfc0000, 0x10000},
686 {"log", 0xfd0000, 0x20000},
687 {"radio", 0xff0000, 0x10000},
691 .first_sysupgrade_partition
= "os-image",
692 .last_sysupgrade_partition
= "file-system",
695 /** Firmware layout for the C2v3 */
697 .id
= "ARCHER-C2-V3",
700 "{product_name:ArcherC2,product_ver:3.0.0,special_id:00000000}\n"
701 "{product_name:ArcherC2,product_ver:3.0.0,special_id:55530000}\n"
702 "{product_name:ArcherC2,product_ver:3.0.0,special_id:45550000}\n",
703 .support_trail
= '\x00',
704 .soft_ver
= "soft_ver:3.0.1\n",
706 /** We're using a dynamic kernel/rootfs split here */
709 {"factory-boot", 0x00000, 0x20000},
710 {"fs-uboot", 0x20000, 0x10000},
711 {"firmware", 0x30000, 0x7a0000},
712 {"user-config", 0x7d0000, 0x04000},
713 {"default-mac", 0x7e0000, 0x00100},
714 {"device-id", 0x7e0100, 0x00100},
715 {"extra-para", 0x7e0200, 0x00100},
716 {"pin", 0x7e0300, 0x00100},
717 {"support-list", 0x7e0400, 0x00400},
718 {"soft-version", 0x7e0800, 0x00400},
719 {"product-info", 0x7e0c00, 0x01400},
720 {"partition-table", 0x7e2000, 0x01000},
721 {"profile", 0x7e3000, 0x01000},
722 {"default-config", 0x7e4000, 0x04000},
723 {"merge-config", 0x7ec000, 0x02000},
724 {"qos-db", 0x7ee000, 0x02000},
725 {"radio", 0x7f0000, 0x10000},
729 .first_sysupgrade_partition
= "os-image",
730 .last_sysupgrade_partition
= "file-system",
733 /** Firmware layout for the C25v1 */
735 .id
= "ARCHER-C25-V1",
738 "{product_name:ArcherC25,product_ver:1.0.0,special_id:00000000}\n"
739 "{product_name:ArcherC25,product_ver:1.0.0,special_id:55530000}\n"
740 "{product_name:ArcherC25,product_ver:1.0.0,special_id:45550000}\n",
741 .support_trail
= '\x00',
742 .soft_ver
= "soft_ver:1.0.0\n",
744 /* We're using a dynamic kernel/rootfs split here */
746 {"factory-boot", 0x00000, 0x20000},
747 {"fs-uboot", 0x20000, 0x10000},
748 {"firmware", 0x30000, 0x7a0000}, /* Stock: name os-image base 0x30000 size 0x100000 */
749 /* Stock: name file-system base 0x130000 size 0x6a0000 */
750 {"user-config", 0x7d0000, 0x04000},
751 {"default-mac", 0x7e0000, 0x00100},
752 {"device-id", 0x7e0100, 0x00100},
753 {"extra-para", 0x7e0200, 0x00100},
754 {"pin", 0x7e0300, 0x00100},
755 {"support-list", 0x7e0400, 0x00400},
756 {"soft-version", 0x7e0800, 0x00400},
757 {"product-info", 0x7e0c00, 0x01400},
758 {"partition-table", 0x7e2000, 0x01000},
759 {"profile", 0x7e3000, 0x01000},
760 {"default-config", 0x7e4000, 0x04000},
761 {"merge-config", 0x7ec000, 0x02000},
762 {"qos-db", 0x7ee000, 0x02000},
763 {"radio", 0x7f0000, 0x10000},
767 .first_sysupgrade_partition
= "os-image",
768 .last_sysupgrade_partition
= "file-system",
771 /** Firmware layout for the C58v1 */
773 .id
= "ARCHER-C58-V1",
777 "{product_name:Archer C58,product_ver:1.0.0,special_id:00000000}\r\n"
778 "{product_name:Archer C58,product_ver:1.0.0,special_id:45550000}\r\n"
779 "{product_name:Archer C58,product_ver:1.0.0,special_id:55530000}\r\n",
780 .support_trail
= '\x00',
781 .soft_ver
= "soft_ver:1.0.0\n",
784 {"fs-uboot", 0x00000, 0x10000},
785 {"default-mac", 0x10000, 0x00200},
786 {"pin", 0x10200, 0x00200},
787 {"product-info", 0x10400, 0x00100},
788 {"partition-table", 0x10500, 0x00800},
789 {"soft-version", 0x11300, 0x00200},
790 {"support-list", 0x11500, 0x00100},
791 {"device-id", 0x11600, 0x00100},
792 {"profile", 0x11700, 0x03900},
793 {"default-config", 0x15000, 0x04000},
794 {"user-config", 0x19000, 0x04000},
795 {"firmware", 0x20000, 0x7c8000},
796 {"certyficate", 0x7e8000, 0x08000},
797 {"radio", 0x7f0000, 0x10000},
801 .first_sysupgrade_partition
= "os-image",
802 .last_sysupgrade_partition
= "file-system",
805 /** Firmware layout for the C59v1 */
807 .id
= "ARCHER-C59-V1",
811 "{product_name:Archer C59,product_ver:1.0.0,special_id:00000000}\r\n"
812 "{product_name:Archer C59,product_ver:1.0.0,special_id:45550000}\r\n"
813 "{product_name:Archer C59,product_ver:1.0.0,special_id:52550000}\r\n"
814 "{product_name:Archer C59,product_ver:1.0.0,special_id:55530000}\r\n",
815 .support_trail
= '\x00',
816 .soft_ver
= "soft_ver:1.0.0\n",
818 /* We're using a dynamic kernel/rootfs split here */
820 {"fs-uboot", 0x00000, 0x10000},
821 {"default-mac", 0x10000, 0x00200},
822 {"pin", 0x10200, 0x00200},
823 {"device-id", 0x10400, 0x00100},
824 {"product-info", 0x10500, 0x0fb00},
825 {"firmware", 0x20000, 0xe30000},
826 {"partition-table", 0xe50000, 0x10000},
827 {"soft-version", 0xe60000, 0x10000},
828 {"support-list", 0xe70000, 0x10000},
829 {"profile", 0xe80000, 0x10000},
830 {"default-config", 0xe90000, 0x10000},
831 {"user-config", 0xea0000, 0x40000},
832 {"usb-config", 0xee0000, 0x10000},
833 {"certificate", 0xef0000, 0x10000},
834 {"qos-db", 0xf00000, 0x40000},
835 {"log", 0xfe0000, 0x10000},
836 {"radio", 0xff0000, 0x10000},
840 .first_sysupgrade_partition
= "os-image",
841 .last_sysupgrade_partition
= "file-system",
844 /** Firmware layout for the C59v2 */
846 .id
= "ARCHER-C59-V2",
850 "{product_name:Archer C59,product_ver:2.0.0,special_id:00000000}\r\n"
851 "{product_name:Archer C59,product_ver:2.0.0,special_id:45550000}\r\n"
852 "{product_name:Archer C59,product_ver:2.0.0,special_id:55530000}\r\n",
853 .support_trail
= '\x00',
854 .soft_ver
= "soft_ver:2.0.0 Build 20161206 rel.7303\n",
856 /** We're using a dynamic kernel/rootfs split here */
858 {"factory-boot", 0x00000, 0x20000},
859 {"fs-uboot", 0x20000, 0x10000},
860 {"default-mac", 0x30000, 0x00200},
861 {"pin", 0x30200, 0x00200},
862 {"device-id", 0x30400, 0x00100},
863 {"product-info", 0x30500, 0x0fb00},
864 {"firmware", 0x40000, 0xe10000},
865 {"partition-table", 0xe50000, 0x10000},
866 {"soft-version", 0xe60000, 0x10000},
867 {"support-list", 0xe70000, 0x10000},
868 {"profile", 0xe80000, 0x10000},
869 {"default-config", 0xe90000, 0x10000},
870 {"user-config", 0xea0000, 0x40000},
871 {"usb-config", 0xee0000, 0x10000},
872 {"certificate", 0xef0000, 0x10000},
873 {"extra-para", 0xf00000, 0x10000},
874 {"qos-db", 0xf10000, 0x30000},
875 {"log", 0xfe0000, 0x10000},
876 {"radio", 0xff0000, 0x10000},
880 .first_sysupgrade_partition
= "os-image",
881 .last_sysupgrade_partition
= "file-system",
884 /** Firmware layout for the Archer C6 v2 (EU/RU/JP) */
886 .id
= "ARCHER-C6-V2",
890 "{product_name:Archer C6,product_ver:2.0.0,special_id:45550000}\r\n"
891 "{product_name:Archer C6,product_ver:2.0.0,special_id:52550000}\r\n"
892 "{product_name:Archer C6,product_ver:2.0.0,special_id:4A500000}\r\n",
893 .support_trail
= '\x00',
894 .soft_ver
= "soft_ver:1.2.1\n",
897 {"fs-uboot", 0x00000, 0x20000},
898 {"default-mac", 0x20000, 0x00200},
899 {"pin", 0x20200, 0x00100},
900 {"product-info", 0x20300, 0x00200},
901 {"device-id", 0x20500, 0x0fb00},
902 {"firmware", 0x30000, 0x7a9400},
903 {"soft-version", 0x7d9400, 0x00100},
904 {"extra-para", 0x7d9500, 0x00100},
905 {"support-list", 0x7d9600, 0x00200},
906 {"profile", 0x7d9800, 0x03000},
907 {"default-config", 0x7dc800, 0x03000},
908 {"partition-table", 0x7df800, 0x00800},
909 {"user-config", 0x7e0000, 0x0c000},
910 {"certificate", 0x7ec000, 0x04000},
911 {"radio", 0x7f0000, 0x10000},
915 .first_sysupgrade_partition
= "os-image",
916 .last_sysupgrade_partition
= "file-system",
919 /** Firmware layout for the Archer C6 v2 (US) and A6 v2 (US/TW) */
921 .id
= "ARCHER-C6-V2-US",
925 "{product_name:Archer A6,product_ver:2.0.0,special_id:55530000}\n"
926 "{product_name:Archer A6,product_ver:2.0.0,special_id:54570000}\n"
927 "{product_name:Archer C6,product_ver:2.0.0,special_id:55530000}\n",
928 .support_trail
= '\x00',
929 .soft_ver
= "soft_ver:1.1.1\n",
932 {"factory-boot", 0x00000, 0x20000},
933 {"default-mac", 0x20000, 0x00200},
934 {"pin", 0x20200, 0x00100},
935 {"product-info", 0x20300, 0x00200},
936 {"device-id", 0x20500, 0x0fb00},
937 {"fs-uboot", 0x30000, 0x20000},
938 {"firmware", 0x50000, 0xf89400},
939 {"soft-version", 0xfd9400, 0x00100},
940 {"extra-para", 0xfd9500, 0x00100},
941 {"support-list", 0xfd9600, 0x00200},
942 {"profile", 0xfd9800, 0x03000},
943 {"default-config", 0xfdc800, 0x03000},
944 {"partition-table", 0xfdf800, 0x00800},
945 {"user-config", 0xfe0000, 0x0c000},
946 {"certificate", 0xfec000, 0x04000},
947 {"radio", 0xff0000, 0x10000},
950 .first_sysupgrade_partition
= "os-image",
951 .last_sysupgrade_partition
= "file-system",
954 /** Firmware layout for the C60v1 */
956 .id
= "ARCHER-C60-V1",
960 "{product_name:Archer C60,product_ver:1.0.0,special_id:00000000}\r\n"
961 "{product_name:Archer C60,product_ver:1.0.0,special_id:45550000}\r\n"
962 "{product_name:Archer C60,product_ver:1.0.0,special_id:55530000}\r\n",
963 .support_trail
= '\x00',
964 .soft_ver
= "soft_ver:1.0.0\n",
967 {"fs-uboot", 0x00000, 0x10000},
968 {"default-mac", 0x10000, 0x00200},
969 {"pin", 0x10200, 0x00200},
970 {"product-info", 0x10400, 0x00100},
971 {"partition-table", 0x10500, 0x00800},
972 {"soft-version", 0x11300, 0x00200},
973 {"support-list", 0x11500, 0x00100},
974 {"device-id", 0x11600, 0x00100},
975 {"profile", 0x11700, 0x03900},
976 {"default-config", 0x15000, 0x04000},
977 {"user-config", 0x19000, 0x04000},
978 {"firmware", 0x20000, 0x7c8000},
979 {"certyficate", 0x7e8000, 0x08000},
980 {"radio", 0x7f0000, 0x10000},
984 .first_sysupgrade_partition
= "os-image",
985 .last_sysupgrade_partition
= "file-system",
988 /** Firmware layout for the C60v2 */
990 .id
= "ARCHER-C60-V2",
994 "{product_name:Archer C60,product_ver:2.0.0,special_id:42520000}\r\n"
995 "{product_name:Archer C60,product_ver:2.0.0,special_id:45550000}\r\n"
996 "{product_name:Archer C60,product_ver:2.0.0,special_id:55530000}\r\n",
997 .support_trail
= '\x00',
998 .soft_ver
= "soft_ver:2.0.0\n",
1001 {"factory-boot", 0x00000, 0x1fb00},
1002 {"default-mac", 0x1fb00, 0x00200},
1003 {"pin", 0x1fd00, 0x00100},
1004 {"product-info", 0x1fe00, 0x00100},
1005 {"device-id", 0x1ff00, 0x00100},
1006 {"fs-uboot", 0x20000, 0x10000},
1007 {"firmware", 0x30000, 0x7a0000},
1008 {"soft-version", 0x7d9500, 0x00100},
1009 {"support-list", 0x7d9600, 0x00100},
1010 {"extra-para", 0x7d9700, 0x00100},
1011 {"profile", 0x7d9800, 0x03000},
1012 {"default-config", 0x7dc800, 0x03000},
1013 {"partition-table", 0x7df800, 0x00800},
1014 {"user-config", 0x7e0000, 0x0c000},
1015 {"certificate", 0x7ec000, 0x04000},
1016 {"radio", 0x7f0000, 0x10000},
1020 .first_sysupgrade_partition
= "os-image",
1021 .last_sysupgrade_partition
= "file-system",
1024 /** Firmware layout for the C60v3 */
1026 .id
= "ARCHER-C60-V3",
1030 "{product_name:Archer C60,product_ver:3.0.0,special_id:42520000}\r\n"
1031 "{product_name:Archer C60,product_ver:3.0.0,special_id:45550000}\r\n"
1032 "{product_name:Archer C60,product_ver:3.0.0,special_id:55530000}\r\n",
1033 .support_trail
= '\x00',
1034 .soft_ver
= "soft_ver:3.0.0\n",
1037 {"factory-boot", 0x00000, 0x1fb00},
1038 {"default-mac", 0x1fb00, 0x00200},
1039 {"pin", 0x1fd00, 0x00100},
1040 {"product-info", 0x1fe00, 0x00100},
1041 {"device-id", 0x1ff00, 0x00100},
1042 {"fs-uboot", 0x20000, 0x10000},
1043 {"firmware", 0x30000, 0x7a0000},
1044 {"soft-version", 0x7d9500, 0x00100},
1045 {"support-list", 0x7d9600, 0x00100},
1046 {"extra-para", 0x7d9700, 0x00100},
1047 {"profile", 0x7d9800, 0x03000},
1048 {"default-config", 0x7dc800, 0x03000},
1049 {"partition-table", 0x7df800, 0x00800},
1050 {"user-config", 0x7e0000, 0x0c000},
1051 {"certificate", 0x7ec000, 0x04000},
1052 {"radio", 0x7f0000, 0x10000},
1056 .first_sysupgrade_partition
= "os-image",
1057 .last_sysupgrade_partition
= "file-system",
1060 /** Firmware layout for the C5 */
1062 .id
= "ARCHER-C5-V2",
1066 "{product_name:ArcherC5,product_ver:2.0.0,special_id:00000000}\r\n"
1067 "{product_name:ArcherC5,product_ver:2.0.0,special_id:55530000}\r\n"
1068 "{product_name:ArcherC5,product_ver:2.0.0,special_id:4A500000}\r\n", /* JP version */
1069 .support_trail
= '\x00',
1073 {"fs-uboot", 0x00000, 0x40000},
1074 {"os-image", 0x40000, 0x200000},
1075 {"file-system", 0x240000, 0xc00000},
1076 {"default-mac", 0xe40000, 0x00200},
1077 {"pin", 0xe40200, 0x00200},
1078 {"product-info", 0xe40400, 0x00200},
1079 {"partition-table", 0xe50000, 0x10000},
1080 {"soft-version", 0xe60000, 0x00200},
1081 {"support-list", 0xe61000, 0x0f000},
1082 {"profile", 0xe70000, 0x10000},
1083 {"default-config", 0xe80000, 0x10000},
1084 {"user-config", 0xe90000, 0x50000},
1085 {"log", 0xee0000, 0x100000},
1086 {"radio_bk", 0xfe0000, 0x10000},
1087 {"radio", 0xff0000, 0x10000},
1091 .first_sysupgrade_partition
= "os-image",
1092 .last_sysupgrade_partition
= "file-system"
1095 /** Firmware layout for the C7 */
1097 .id
= "ARCHER-C7-V4",
1100 "{product_name:Archer C7,product_ver:4.0.0,special_id:00000000}\n"
1101 "{product_name:Archer C7,product_ver:4.0.0,special_id:41550000}\n"
1102 "{product_name:Archer C7,product_ver:4.0.0,special_id:45550000}\n"
1103 "{product_name:Archer C7,product_ver:4.0.0,special_id:4B520000}\n"
1104 "{product_name:Archer C7,product_ver:4.0.0,special_id:42520000}\n"
1105 "{product_name:Archer C7,product_ver:4.0.0,special_id:4A500000}\n"
1106 "{product_name:Archer C7,product_ver:4.0.0,special_id:52550000}\n"
1107 "{product_name:Archer C7,product_ver:4.0.0,special_id:54570000}\n"
1108 "{product_name:Archer C7,product_ver:4.0.0,special_id:55530000}\n"
1109 "{product_name:Archer C7,product_ver:4.0.0,special_id:43410000}\n",
1110 .support_trail
= '\x00',
1111 .soft_ver
= "soft_ver:1.0.0\n",
1113 /* We're using a dynamic kernel/rootfs split here */
1115 {"factory-boot", 0x00000, 0x20000},
1116 {"fs-uboot", 0x20000, 0x20000},
1117 {"firmware", 0x40000, 0xEC0000}, /* Stock: name os-image base 0x40000 size 0x120000 */
1118 /* Stock: name file-system base 0x160000 size 0xda0000 */
1119 {"default-mac", 0xf00000, 0x00200},
1120 {"pin", 0xf00200, 0x00200},
1121 {"device-id", 0xf00400, 0x00100},
1122 {"product-info", 0xf00500, 0x0fb00},
1123 {"soft-version", 0xf10000, 0x00100},
1124 {"extra-para", 0xf11000, 0x01000},
1125 {"support-list", 0xf12000, 0x0a000},
1126 {"profile", 0xf1c000, 0x04000},
1127 {"default-config", 0xf20000, 0x10000},
1128 {"user-config", 0xf30000, 0x40000},
1129 {"qos-db", 0xf70000, 0x40000},
1130 {"certificate", 0xfb0000, 0x10000},
1131 {"partition-table", 0xfc0000, 0x10000},
1132 {"log", 0xfd0000, 0x20000},
1133 {"radio", 0xff0000, 0x10000},
1137 .first_sysupgrade_partition
= "os-image",
1138 .last_sysupgrade_partition
= "file-system",
1141 /** Firmware layout for the C7 v5*/
1143 .id
= "ARCHER-C7-V5",
1146 "{product_name:Archer C7,product_ver:5.0.0,special_id:00000000}\n"
1147 "{product_name:Archer C7,product_ver:5.0.0,special_id:45550000}\n"
1148 "{product_name:Archer C7,product_ver:5.0.0,special_id:55530000}\n"
1149 "{product_name:Archer C7,product_ver:5.0.0,special_id:43410000}\n"
1150 "{product_name:Archer C7,product_ver:5.0.0,special_id:4A500000}\n"
1151 "{product_name:Archer C7,product_ver:5.0.0,special_id:54570000}\n"
1152 "{product_name:Archer C7,product_ver:5.0.0,special_id:52550000}\n"
1153 "{product_name:Archer C7,product_ver:5.0.0,special_id:4B520000}\n",
1155 .support_trail
= '\x00',
1156 .soft_ver
= "soft_ver:1.0.0\n",
1158 /* We're using a dynamic kernel/rootfs split here */
1160 {"factory-boot", 0x00000, 0x20000},
1161 {"fs-uboot", 0x20000, 0x20000},
1162 {"partition-table", 0x40000, 0x10000},
1163 {"radio", 0x50000, 0x10000},
1164 {"default-mac", 0x60000, 0x00200},
1165 {"pin", 0x60200, 0x00200},
1166 {"device-id", 0x60400, 0x00100},
1167 {"product-info", 0x60500, 0x0fb00},
1168 {"soft-version", 0x70000, 0x01000},
1169 {"extra-para", 0x71000, 0x01000},
1170 {"support-list", 0x72000, 0x0a000},
1171 {"profile", 0x7c000, 0x04000},
1172 {"user-config", 0x80000, 0x40000},
1175 {"firmware", 0xc0000, 0xf00000}, /* Stock: name os-image base 0xc0000 size 0x120000 */
1176 /* Stock: name file-system base 0x1e0000 size 0xde0000 */
1178 {"log", 0xfc0000, 0x20000},
1179 {"certificate", 0xfe0000, 0x10000},
1180 {"default-config", 0xff0000, 0x10000},
1185 .first_sysupgrade_partition
= "os-image",
1186 .last_sysupgrade_partition
= "file-system",
1189 /** Firmware layout for the C9 */
1195 "{product_name:ArcherC9,"
1196 "product_ver:1.0.0,"
1197 "special_id:00000000}\n",
1198 .support_trail
= '\x00',
1202 {"fs-uboot", 0x00000, 0x40000},
1203 {"os-image", 0x40000, 0x200000},
1204 {"file-system", 0x240000, 0xc00000},
1205 {"default-mac", 0xe40000, 0x00200},
1206 {"pin", 0xe40200, 0x00200},
1207 {"product-info", 0xe40400, 0x00200},
1208 {"partition-table", 0xe50000, 0x10000},
1209 {"soft-version", 0xe60000, 0x00200},
1210 {"support-list", 0xe61000, 0x0f000},
1211 {"profile", 0xe70000, 0x10000},
1212 {"default-config", 0xe80000, 0x10000},
1213 {"user-config", 0xe90000, 0x50000},
1214 {"log", 0xee0000, 0x100000},
1215 {"radio_bk", 0xfe0000, 0x10000},
1216 {"radio", 0xff0000, 0x10000},
1220 .first_sysupgrade_partition
= "os-image",
1221 .last_sysupgrade_partition
= "file-system"
1224 /** Firmware layout for the EAP120 */
1227 .vendor
= "EAP120(TP-LINK|UN|N300-2):1.0\r\n",
1230 "EAP120(TP-LINK|UN|N300-2):1.0\r\n",
1231 .support_trail
= '\xff',
1235 {"fs-uboot", 0x00000, 0x20000},
1236 {"partition-table", 0x20000, 0x02000},
1237 {"default-mac", 0x30000, 0x00020},
1238 {"support-list", 0x31000, 0x00100},
1239 {"product-info", 0x31100, 0x00100},
1240 {"soft-version", 0x32000, 0x00100},
1241 {"os-image", 0x40000, 0x180000},
1242 {"file-system", 0x1c0000, 0x600000},
1243 {"user-config", 0x7c0000, 0x10000},
1244 {"backup-config", 0x7d0000, 0x10000},
1245 {"log", 0x7e0000, 0x10000},
1246 {"radio", 0x7f0000, 0x10000},
1250 .first_sysupgrade_partition
= "os-image",
1251 .last_sysupgrade_partition
= "file-system"
1254 /** Firmware layout for the TL-WA850RE v2 */
1256 .id
= "TLWA850REV2",
1260 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:55530000}\n"
1261 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:00000000}\n"
1262 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:55534100}\n"
1263 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:45550000}\n"
1264 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:4B520000}\n"
1265 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:42520000}\n"
1266 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:4A500000}\n"
1267 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:43410000}\n"
1268 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:41550000}\n"
1269 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:52550000}\n",
1270 .support_trail
= '\x00',
1274 576KB were moved from file-system to os-image
1275 in comparison to the stock image
1278 {"fs-uboot", 0x00000, 0x20000},
1279 {"firmware", 0x20000, 0x390000},
1280 {"partition-table", 0x3b0000, 0x02000},
1281 {"default-mac", 0x3c0000, 0x00020},
1282 {"pin", 0x3c0100, 0x00020},
1283 {"product-info", 0x3c1000, 0x01000},
1284 {"soft-version", 0x3c2000, 0x00100},
1285 {"support-list", 0x3c3000, 0x01000},
1286 {"profile", 0x3c4000, 0x08000},
1287 {"user-config", 0x3d0000, 0x10000},
1288 {"default-config", 0x3e0000, 0x10000},
1289 {"radio", 0x3f0000, 0x10000},
1293 .first_sysupgrade_partition
= "os-image",
1294 .last_sysupgrade_partition
= "file-system"
1297 /** Firmware layout for the TL-WA855RE v1 */
1299 .id
= "TLWA855REV1",
1303 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:00000000}\n"
1304 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:55530000}\n"
1305 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:45550000}\n"
1306 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:4B520000}\n"
1307 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:42520000}\n"
1308 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:4A500000}\n"
1309 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:43410000}\n"
1310 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:41550000}\n"
1311 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:52550000}\n",
1312 .support_trail
= '\x00',
1316 {"fs-uboot", 0x00000, 0x20000},
1317 {"os-image", 0x20000, 0x150000},
1318 {"file-system", 0x170000, 0x240000},
1319 {"partition-table", 0x3b0000, 0x02000},
1320 {"default-mac", 0x3c0000, 0x00020},
1321 {"pin", 0x3c0100, 0x00020},
1322 {"product-info", 0x3c1000, 0x01000},
1323 {"soft-version", 0x3c2000, 0x00100},
1324 {"support-list", 0x3c3000, 0x01000},
1325 {"profile", 0x3c4000, 0x08000},
1326 {"user-config", 0x3d0000, 0x10000},
1327 {"default-config", 0x3e0000, 0x10000},
1328 {"radio", 0x3f0000, 0x10000},
1332 .first_sysupgrade_partition
= "os-image",
1333 .last_sysupgrade_partition
= "file-system"
1336 /** Firmware layout for the TL-WR1043 v5 */
1338 .id
= "TLWR1043NV5",
1342 "{product_name:TL-WR1043N,product_ver:5.0.0,special_id:45550000}\n"
1343 "{product_name:TL-WR1043N,product_ver:5.0.0,special_id:55530000}\n",
1344 .support_trail
= '\x00',
1345 .soft_ver
= "soft_ver:1.0.0\n",
1347 {"factory-boot", 0x00000, 0x20000},
1348 {"fs-uboot", 0x20000, 0x20000},
1349 {"firmware", 0x40000, 0xec0000},
1350 {"default-mac", 0xf00000, 0x00200},
1351 {"pin", 0xf00200, 0x00200},
1352 {"device-id", 0xf00400, 0x00100},
1353 {"product-info", 0xf00500, 0x0fb00},
1354 {"soft-version", 0xf10000, 0x01000},
1355 {"extra-para", 0xf11000, 0x01000},
1356 {"support-list", 0xf12000, 0x0a000},
1357 {"profile", 0xf1c000, 0x04000},
1358 {"default-config", 0xf20000, 0x10000},
1359 {"user-config", 0xf30000, 0x40000},
1360 {"qos-db", 0xf70000, 0x40000},
1361 {"certificate", 0xfb0000, 0x10000},
1362 {"partition-table", 0xfc0000, 0x10000},
1363 {"log", 0xfd0000, 0x20000},
1364 {"radio", 0xff0000, 0x10000},
1367 .first_sysupgrade_partition
= "os-image",
1368 .last_sysupgrade_partition
= "file-system"
1371 /** Firmware layout for the TL-WR1043 v4 */
1373 .id
= "TLWR1043NDV4",
1377 "{product_name:TL-WR1043ND,product_ver:4.0.0,special_id:45550000}\n",
1378 .support_trail
= '\x00',
1381 /* We're using a dynamic kernel/rootfs split here */
1383 {"fs-uboot", 0x00000, 0x20000},
1384 {"firmware", 0x20000, 0xf30000},
1385 {"default-mac", 0xf50000, 0x00200},
1386 {"pin", 0xf50200, 0x00200},
1387 {"product-info", 0xf50400, 0x0fc00},
1388 {"soft-version", 0xf60000, 0x0b000},
1389 {"support-list", 0xf6b000, 0x04000},
1390 {"profile", 0xf70000, 0x04000},
1391 {"default-config", 0xf74000, 0x0b000},
1392 {"user-config", 0xf80000, 0x40000},
1393 {"partition-table", 0xfc0000, 0x10000},
1394 {"log", 0xfd0000, 0x20000},
1395 {"radio", 0xff0000, 0x10000},
1399 .first_sysupgrade_partition
= "os-image",
1400 .last_sysupgrade_partition
= "file-system"
1403 /** Firmware layout for the TL-WR902AC v1 */
1405 .id
= "TL-WR902AC-V1",
1409 "{product_name:TL-WR902AC,product_ver:1.0.0,special_id:45550000}\n"
1410 "{product_name:TL-WR902AC,product_ver:1.0.0,special_id:55530000}\n",
1411 .support_trail
= '\x00',
1415 384KB were moved from file-system to os-image
1416 in comparison to the stock image
1419 {"fs-uboot", 0x00000, 0x20000},
1420 {"firmware", 0x20000, 0x730000},
1421 {"default-mac", 0x750000, 0x00200},
1422 {"pin", 0x750200, 0x00200},
1423 {"product-info", 0x750400, 0x0fc00},
1424 {"soft-version", 0x760000, 0x0b000},
1425 {"support-list", 0x76b000, 0x04000},
1426 {"profile", 0x770000, 0x04000},
1427 {"default-config", 0x774000, 0x0b000},
1428 {"user-config", 0x780000, 0x40000},
1429 {"partition-table", 0x7c0000, 0x10000},
1430 {"log", 0x7d0000, 0x20000},
1431 {"radio", 0x7f0000, 0x10000},
1435 .first_sysupgrade_partition
= "os-image",
1436 .last_sysupgrade_partition
= "file-system",
1439 /** Firmware layout for the TL-WR942N V1 */
1445 "{product_name:TL-WR942N,product_ver:1.0.0,special_id:00000000}\r\n"
1446 "{product_name:TL-WR942N,product_ver:1.0.0,special_id:52550000}\r\n",
1447 .support_trail
= '\x00',
1451 {"fs-uboot", 0x00000, 0x20000},
1452 {"firmware", 0x20000, 0xe20000},
1453 {"default-mac", 0xe40000, 0x00200},
1454 {"pin", 0xe40200, 0x00200},
1455 {"product-info", 0xe40400, 0x0fc00},
1456 {"partition-table", 0xe50000, 0x10000},
1457 {"soft-version", 0xe60000, 0x10000},
1458 {"support-list", 0xe70000, 0x10000},
1459 {"profile", 0xe80000, 0x10000},
1460 {"default-config", 0xe90000, 0x10000},
1461 {"user-config", 0xea0000, 0x40000},
1462 {"qos-db", 0xee0000, 0x40000},
1463 {"certificate", 0xf20000, 0x10000},
1464 {"usb-config", 0xfb0000, 0x10000},
1465 {"log", 0xfc0000, 0x20000},
1466 {"radio-bk", 0xfe0000, 0x10000},
1467 {"radio", 0xff0000, 0x10000},
1471 .first_sysupgrade_partition
= "os-image",
1472 .last_sysupgrade_partition
= "file-system",
1475 /** Firmware layout for the RE200 v2 */
1481 "{product_name:RE200,product_ver:2.0.0,special_id:00000000}\n"
1482 "{product_name:RE200,product_ver:2.0.0,special_id:41520000}\n"
1483 "{product_name:RE200,product_ver:2.0.0,special_id:41550000}\n"
1484 "{product_name:RE200,product_ver:2.0.0,special_id:42520000}\n"
1485 "{product_name:RE200,product_ver:2.0.0,special_id:43410000}\n"
1486 "{product_name:RE200,product_ver:2.0.0,special_id:45530000}\n"
1487 "{product_name:RE200,product_ver:2.0.0,special_id:45550000}\n"
1488 "{product_name:RE200,product_ver:2.0.0,special_id:49440000}\n"
1489 "{product_name:RE200,product_ver:2.0.0,special_id:4a500000}\n"
1490 "{product_name:RE200,product_ver:2.0.0,special_id:4b520000}\n"
1491 "{product_name:RE200,product_ver:2.0.0,special_id:52550000}\n"
1492 "{product_name:RE200,product_ver:2.0.0,special_id:54570000}\n"
1493 "{product_name:RE200,product_ver:2.0.0,special_id:55530000}\n",
1494 .support_trail
= '\x00',
1498 {"fs-uboot", 0x00000, 0x20000},
1499 {"firmware", 0x20000, 0x7a0000},
1500 {"partition-table", 0x7c0000, 0x02000},
1501 {"default-mac", 0x7c2000, 0x00020},
1502 {"pin", 0x7c2100, 0x00020},
1503 {"product-info", 0x7c3100, 0x01000},
1504 {"soft-version", 0x7c4200, 0x01000},
1505 {"support-list", 0x7c5200, 0x01000},
1506 {"profile", 0x7c6200, 0x08000},
1507 {"config-info", 0x7ce200, 0x00400},
1508 {"user-config", 0x7d0000, 0x10000},
1509 {"default-config", 0x7e0000, 0x10000},
1510 {"radio", 0x7f0000, 0x10000},
1514 .first_sysupgrade_partition
= "os-image",
1515 .last_sysupgrade_partition
= "file-system"
1518 /** Firmware layout for the RE305 v1 */
1524 "{product_name:RE305,product_ver:1.0.0,special_id:45550000}\n"
1525 "{product_name:RE305,product_ver:1.0.0,special_id:55530000}\n"
1526 "{product_name:RE305,product_ver:1.0.0,special_id:4a500000}\n"
1527 "{product_name:RE305,product_ver:1.0.0,special_id:42520000}\n"
1528 "{product_name:RE305,product_ver:1.0.0,special_id:4b520000}\n"
1529 "{product_name:RE305,product_ver:1.0.0,special_id:41550000}\n"
1530 "{product_name:RE305,product_ver:1.0.0,special_id:43410000}\n",
1531 .support_trail
= '\x00',
1535 {"fs-uboot", 0x00000, 0x20000},
1536 {"firmware", 0x20000, 0x5e0000},
1537 {"partition-table", 0x600000, 0x02000},
1538 {"default-mac", 0x610000, 0x00020},
1539 {"pin", 0x610100, 0x00020},
1540 {"product-info", 0x611100, 0x01000},
1541 {"soft-version", 0x620000, 0x01000},
1542 {"support-list", 0x621000, 0x01000},
1543 {"profile", 0x622000, 0x08000},
1544 {"user-config", 0x630000, 0x10000},
1545 {"default-config", 0x640000, 0x10000},
1546 {"radio", 0x7f0000, 0x10000},
1550 .first_sysupgrade_partition
= "os-image",
1551 .last_sysupgrade_partition
= "file-system"
1554 /** Firmware layout for the RE350 v1 */
1560 "{product_name:RE350,product_ver:1.0.0,special_id:45550000}\n"
1561 "{product_name:RE350,product_ver:1.0.0,special_id:00000000}\n"
1562 "{product_name:RE350,product_ver:1.0.0,special_id:41550000}\n"
1563 "{product_name:RE350,product_ver:1.0.0,special_id:55530000}\n"
1564 "{product_name:RE350,product_ver:1.0.0,special_id:43410000}\n"
1565 "{product_name:RE350,product_ver:1.0.0,special_id:4b520000}\n"
1566 "{product_name:RE350,product_ver:1.0.0,special_id:4a500000}\n",
1567 .support_trail
= '\x00',
1570 /** We're using a dynamic kernel/rootfs split here */
1572 {"fs-uboot", 0x00000, 0x20000},
1573 {"firmware", 0x20000, 0x5e0000},
1574 {"partition-table", 0x600000, 0x02000},
1575 {"default-mac", 0x610000, 0x00020},
1576 {"pin", 0x610100, 0x00020},
1577 {"product-info", 0x611100, 0x01000},
1578 {"soft-version", 0x620000, 0x01000},
1579 {"support-list", 0x621000, 0x01000},
1580 {"profile", 0x622000, 0x08000},
1581 {"user-config", 0x630000, 0x10000},
1582 {"default-config", 0x640000, 0x10000},
1583 {"radio", 0x7f0000, 0x10000},
1587 .first_sysupgrade_partition
= "os-image",
1588 .last_sysupgrade_partition
= "file-system"
1591 /** Firmware layout for the RE350K v1 */
1597 "{product_name:RE350K,product_ver:1.0.0,special_id:00000000,product_region:US}\n",
1598 .support_trail
= '\x00',
1601 /** We're using a dynamic kernel/rootfs split here */
1603 {"fs-uboot", 0x00000, 0x20000},
1604 {"firmware", 0x20000, 0xd70000},
1605 {"partition-table", 0xd90000, 0x02000},
1606 {"default-mac", 0xda0000, 0x00020},
1607 {"pin", 0xda0100, 0x00020},
1608 {"product-info", 0xda1100, 0x01000},
1609 {"soft-version", 0xdb0000, 0x01000},
1610 {"support-list", 0xdb1000, 0x01000},
1611 {"profile", 0xdb2000, 0x08000},
1612 {"user-config", 0xdc0000, 0x10000},
1613 {"default-config", 0xdd0000, 0x10000},
1614 {"device-id", 0xde0000, 0x00108},
1615 {"radio", 0xff0000, 0x10000},
1619 .first_sysupgrade_partition
= "os-image",
1620 .last_sysupgrade_partition
= "file-system"
1623 /** Firmware layout for the RE355 */
1629 "{product_name:RE355,product_ver:1.0.0,special_id:00000000}\r\n"
1630 "{product_name:RE355,product_ver:1.0.0,special_id:55530000}\r\n"
1631 "{product_name:RE355,product_ver:1.0.0,special_id:45550000}\r\n"
1632 "{product_name:RE355,product_ver:1.0.0,special_id:4A500000}\r\n"
1633 "{product_name:RE355,product_ver:1.0.0,special_id:43410000}\r\n"
1634 "{product_name:RE355,product_ver:1.0.0,special_id:41550000}\r\n"
1635 "{product_name:RE355,product_ver:1.0.0,special_id:4B520000}\r\n"
1636 "{product_name:RE355,product_ver:1.0.0,special_id:55534100}\r\n",
1637 .support_trail
= '\x00',
1640 /* We're using a dynamic kernel/rootfs split here */
1642 {"fs-uboot", 0x00000, 0x20000},
1643 {"firmware", 0x20000, 0x5e0000},
1644 {"partition-table", 0x600000, 0x02000},
1645 {"default-mac", 0x610000, 0x00020},
1646 {"pin", 0x610100, 0x00020},
1647 {"product-info", 0x611100, 0x01000},
1648 {"soft-version", 0x620000, 0x01000},
1649 {"support-list", 0x621000, 0x01000},
1650 {"profile", 0x622000, 0x08000},
1651 {"user-config", 0x630000, 0x10000},
1652 {"default-config", 0x640000, 0x10000},
1653 {"radio", 0x7f0000, 0x10000},
1657 .first_sysupgrade_partition
= "os-image",
1658 .last_sysupgrade_partition
= "file-system"
1661 /** Firmware layout for the RE450 */
1667 "{product_name:RE450,product_ver:1.0.0,special_id:00000000}\r\n"
1668 "{product_name:RE450,product_ver:1.0.0,special_id:55530000}\r\n"
1669 "{product_name:RE450,product_ver:1.0.0,special_id:45550000}\r\n"
1670 "{product_name:RE450,product_ver:1.0.0,special_id:4A500000}\r\n"
1671 "{product_name:RE450,product_ver:1.0.0,special_id:43410000}\r\n"
1672 "{product_name:RE450,product_ver:1.0.0,special_id:41550000}\r\n"
1673 "{product_name:RE450,product_ver:1.0.0,special_id:4B520000}\r\n"
1674 "{product_name:RE450,product_ver:1.0.0,special_id:55534100}\r\n",
1675 .support_trail
= '\x00',
1678 /** We're using a dynamic kernel/rootfs split here */
1680 {"fs-uboot", 0x00000, 0x20000},
1681 {"firmware", 0x20000, 0x5e0000},
1682 {"partition-table", 0x600000, 0x02000},
1683 {"default-mac", 0x610000, 0x00020},
1684 {"pin", 0x610100, 0x00020},
1685 {"product-info", 0x611100, 0x01000},
1686 {"soft-version", 0x620000, 0x01000},
1687 {"support-list", 0x621000, 0x01000},
1688 {"profile", 0x622000, 0x08000},
1689 {"user-config", 0x630000, 0x10000},
1690 {"default-config", 0x640000, 0x10000},
1691 {"radio", 0x7f0000, 0x10000},
1695 .first_sysupgrade_partition
= "os-image",
1696 .last_sysupgrade_partition
= "file-system"
1699 /** Firmware layout for the RE450 v2 */
1705 "{product_name:RE450,product_ver:2.0.0,special_id:00000000}\r\n"
1706 "{product_name:RE450,product_ver:2.0.0,special_id:55530000}\r\n"
1707 "{product_name:RE450,product_ver:2.0.0,special_id:45550000}\r\n"
1708 "{product_name:RE450,product_ver:2.0.0,special_id:4A500000}\r\n"
1709 "{product_name:RE450,product_ver:2.0.0,special_id:43410000}\r\n"
1710 "{product_name:RE450,product_ver:2.0.0,special_id:41550000}\r\n"
1711 "{product_name:RE450,product_ver:2.0.0,special_id:41530000}\r\n"
1712 "{product_name:RE450,product_ver:2.0.0,special_id:4B520000}\r\n"
1713 "{product_name:RE450,product_ver:2.0.0,special_id:42520000}\r\n",
1714 .support_trail
= '\x00',
1717 /* We're using a dynamic kernel/rootfs split here */
1719 {"fs-uboot", 0x00000, 0x20000},
1720 {"firmware", 0x20000, 0x5e0000},
1721 {"partition-table", 0x600000, 0x02000},
1722 {"default-mac", 0x610000, 0x00020},
1723 {"pin", 0x610100, 0x00020},
1724 {"product-info", 0x611100, 0x01000},
1725 {"soft-version", 0x620000, 0x01000},
1726 {"support-list", 0x621000, 0x01000},
1727 {"profile", 0x622000, 0x08000},
1728 {"user-config", 0x630000, 0x10000},
1729 {"default-config", 0x640000, 0x10000},
1730 {"radio", 0x7f0000, 0x10000},
1735 .first_sysupgrade_partition
= "os-image",
1736 .last_sysupgrade_partition
= "file-system"
1739 /** Firmware layout for the RE650 */
1745 "{product_name:RE650,product_ver:1.0.0,special_id:00000000}\r\n"
1746 "{product_name:RE650,product_ver:1.0.0,special_id:55530000}\r\n"
1747 "{product_name:RE650,product_ver:1.0.0,special_id:45550000}\r\n"
1748 "{product_name:RE650,product_ver:1.0.0,special_id:4A500000}\r\n"
1749 "{product_name:RE650,product_ver:1.0.0,special_id:43410000}\r\n"
1750 "{product_name:RE650,product_ver:1.0.0,special_id:41550000}\r\n"
1751 "{product_name:RE650,product_ver:1.0.0,special_id:41530000}\r\n",
1752 .support_trail
= '\x00',
1755 /* We're using a dynamic kernel/rootfs split here */
1757 {"fs-uboot", 0x00000, 0x20000},
1758 {"firmware", 0x20000, 0xde0000},
1759 {"partition-table", 0xe00000, 0x02000},
1760 {"default-mac", 0xe10000, 0x00020},
1761 {"pin", 0xe10100, 0x00020},
1762 {"product-info", 0xe11100, 0x01000},
1763 {"soft-version", 0xe20000, 0x01000},
1764 {"support-list", 0xe21000, 0x01000},
1765 {"profile", 0xe22000, 0x08000},
1766 {"user-config", 0xe30000, 0x10000},
1767 {"default-config", 0xe40000, 0x10000},
1768 {"radio", 0xff0000, 0x10000},
1772 .first_sysupgrade_partition
= "os-image",
1773 .last_sysupgrade_partition
= "file-system"
1779 #define error(_ret, _errno, _str, ...) \
1781 fprintf(stderr, _str ": %s\n", ## __VA_ARGS__, \
1782 strerror(_errno)); \
1788 /** Stores a uint32 as big endian */
1789 static inline void put32(uint8_t *buf
, uint32_t val
) {
1796 /** Allocates a new image partition */
1797 static struct image_partition_entry
alloc_image_partition(const char *name
, size_t len
) {
1798 struct image_partition_entry entry
= {name
, len
, malloc(len
)};
1800 error(1, errno
, "malloc");
1805 /** Frees an image partition */
1806 static void free_image_partition(struct image_partition_entry entry
) {
1810 static time_t source_date_epoch
= -1;
1811 static void set_source_date_epoch() {
1812 char *env
= getenv("SOURCE_DATE_EPOCH");
1816 source_date_epoch
= strtoull(env
, &endptr
, 10);
1817 if (errno
|| (endptr
&& *endptr
!= '\0')) {
1818 fprintf(stderr
, "Invalid SOURCE_DATE_EPOCH");
1824 /** Generates the partition-table partition */
1825 static struct image_partition_entry
make_partition_table(const struct flash_partition_entry
*p
) {
1826 struct image_partition_entry entry
= alloc_image_partition("partition-table", 0x800);
1828 char *s
= (char *)entry
.data
, *end
= (char *)(s
+entry
.size
);
1836 for (i
= 0; p
[i
].name
; i
++) {
1838 size_t w
= snprintf(s
, len
, "partition %s base 0x%05x size 0x%05x\n", p
[i
].name
, p
[i
].base
, p
[i
].size
);
1841 error(1, 0, "flash partition table overflow?");
1848 memset(s
, 0xff, end
-s
);
1854 /** Generates a binary-coded decimal representation of an integer in the range [0, 99] */
1855 static inline uint8_t bcd(uint8_t v
) {
1856 return 0x10 * (v
/10) + v
%10;
1860 /** Generates the soft-version partition */
1861 static struct image_partition_entry
make_soft_version(uint32_t rev
) {
1862 struct image_partition_entry entry
= alloc_image_partition("soft-version", sizeof(struct soft_version
));
1863 struct soft_version
*s
= (struct soft_version
*)entry
.data
;
1867 if (source_date_epoch
!= -1)
1868 t
= source_date_epoch
;
1869 else if (time(&t
) == (time_t)(-1))
1870 error(1, errno
, "time");
1872 struct tm
*tm
= localtime(&t
);
1874 s
->magic
= htonl(0x0000000c);
1878 s
->version_major
= 0;
1879 s
->version_minor
= 0;
1880 s
->version_patch
= 0;
1882 s
->year_hi
= bcd((1900+tm
->tm_year
)/100);
1883 s
->year_lo
= bcd(tm
->tm_year
%100);
1884 s
->month
= bcd(tm
->tm_mon
+1);
1885 s
->day
= bcd(tm
->tm_mday
);
1886 s
->rev
= htonl(rev
);
1893 static struct image_partition_entry
make_soft_version_from_string(const char *soft_ver
) {
1894 /** String length _including_ the terminating zero byte */
1895 uint32_t ver_len
= strlen(soft_ver
) + 1;
1896 /** Partition contains 64 bit header, the version string, and one additional null byte */
1897 size_t partition_len
= 2*sizeof(uint32_t) + ver_len
+ 1;
1898 struct image_partition_entry entry
= alloc_image_partition("soft-version", partition_len
);
1900 uint32_t *len
= (uint32_t *)entry
.data
;
1901 len
[0] = htonl(ver_len
);
1903 memcpy(&len
[2], soft_ver
, ver_len
);
1905 entry
.data
[partition_len
- 1] = 0;
1910 /** Generates the support-list partition */
1911 static struct image_partition_entry
make_support_list(struct device_info
*info
) {
1912 size_t len
= strlen(info
->support_list
);
1913 struct image_partition_entry entry
= alloc_image_partition("support-list", len
+ 9);
1915 put32(entry
.data
, len
);
1916 memset(entry
.data
+4, 0, 4);
1917 memcpy(entry
.data
+8, info
->support_list
, len
);
1918 entry
.data
[len
+8] = info
->support_trail
;
1923 /** Creates a new image partition with an arbitrary name from a file */
1924 static struct image_partition_entry
read_file(const char *part_name
, const char *filename
, bool add_jffs2_eof
, struct flash_partition_entry
*file_system_partition
) {
1925 struct stat statbuf
;
1927 if (stat(filename
, &statbuf
) < 0)
1928 error(1, errno
, "unable to stat file `%s'", filename
);
1930 size_t len
= statbuf
.st_size
;
1932 if (add_jffs2_eof
) {
1933 if (file_system_partition
)
1934 len
= ALIGN(len
+ file_system_partition
->base
, 0x10000) + sizeof(jffs2_eof_mark
) - file_system_partition
->base
;
1936 len
= ALIGN(len
, 0x10000) + sizeof(jffs2_eof_mark
);
1939 struct image_partition_entry entry
= alloc_image_partition(part_name
, len
);
1941 FILE *file
= fopen(filename
, "rb");
1943 error(1, errno
, "unable to open file `%s'", filename
);
1945 if (fread(entry
.data
, statbuf
.st_size
, 1, file
) != 1)
1946 error(1, errno
, "unable to read file `%s'", filename
);
1948 if (add_jffs2_eof
) {
1949 uint8_t *eof
= entry
.data
+ statbuf
.st_size
, *end
= entry
.data
+entry
.size
;
1951 memset(eof
, 0xff, end
- eof
- sizeof(jffs2_eof_mark
));
1952 memcpy(end
- sizeof(jffs2_eof_mark
), jffs2_eof_mark
, sizeof(jffs2_eof_mark
));
1960 /** Creates a new image partition from arbitrary data */
1961 static struct image_partition_entry
put_data(const char *part_name
, const char *datain
, size_t len
) {
1963 struct image_partition_entry entry
= alloc_image_partition(part_name
, len
);
1965 memcpy(entry
.data
, datain
, len
);
1971 Copies a list of image partitions into an image buffer and generates the image partition table while doing so
1973 Example image partition table:
1975 fwup-ptn partition-table base 0x00800 size 0x00800
1976 fwup-ptn os-image base 0x01000 size 0x113b45
1977 fwup-ptn file-system base 0x114b45 size 0x1d0004
1978 fwup-ptn support-list base 0x2e4b49 size 0x000d1
1980 Each line of the partition table is terminated with the bytes 09 0d 0a ("\t\r\n"),
1981 the end of the partition table is marked with a zero byte.
1983 The firmware image must contain at least the partition-table and support-list partitions
1984 to be accepted. There aren't any alignment constraints for the image partitions.
1986 The partition-table partition contains the actual flash layout; partitions
1987 from the image partition table are mapped to the corresponding flash partitions during
1988 the firmware upgrade. The support-list partition contains a list of devices supported by
1991 The base offsets in the firmware partition table are relative to the end
1992 of the vendor information block, so the partition-table partition will
1993 actually start at offset 0x1814 of the image.
1995 I think partition-table must be the first partition in the firmware image.
1997 static void put_partitions(uint8_t *buffer
, const struct flash_partition_entry
*flash_parts
, const struct image_partition_entry
*parts
) {
1999 char *image_pt
= (char *)buffer
, *end
= image_pt
+ 0x800;
2001 size_t base
= 0x800;
2002 for (i
= 0; parts
[i
].name
; i
++) {
2003 for (j
= 0; flash_parts
[j
].name
; j
++) {
2004 if (!strcmp(flash_parts
[j
].name
, parts
[i
].name
)) {
2005 if (parts
[i
].size
> flash_parts
[j
].size
)
2006 error(1, 0, "%s partition too big (more than %u bytes)", flash_parts
[j
].name
, (unsigned)flash_parts
[j
].size
);
2011 assert(flash_parts
[j
].name
);
2013 memcpy(buffer
+ base
, parts
[i
].data
, parts
[i
].size
);
2015 size_t len
= end
-image_pt
;
2016 size_t w
= snprintf(image_pt
, len
, "fwup-ptn %s base 0x%05x size 0x%05x\t\r\n", parts
[i
].name
, (unsigned)base
, (unsigned)parts
[i
].size
);
2019 error(1, 0, "image partition table overflow?");
2023 base
+= parts
[i
].size
;
2027 /** Generates and writes the image MD5 checksum */
2028 static void put_md5(uint8_t *md5
, uint8_t *buffer
, unsigned int len
) {
2032 MD5_Update(&ctx
, md5_salt
, (unsigned int)sizeof(md5_salt
));
2033 MD5_Update(&ctx
, buffer
, len
);
2034 MD5_Final(md5
, &ctx
);
2039 Generates the firmware image in factory format
2045 0000-0003 Image size (4 bytes, big endian)
2046 0004-0013 MD5 hash (hash of a 16 byte salt and the image data starting with byte 0x14)
2047 0014-0017 Vendor information length (without padding) (4 bytes, big endian)
2048 0018-1013 Vendor information (4092 bytes, padded with 0xff; there seem to be older
2049 (VxWorks-based) TP-LINK devices which use a smaller vendor information block)
2050 1014-1813 Image partition table (2048 bytes, padded with 0xff)
2051 1814-xxxx Firmware partitions
2053 static void * generate_factory_image(struct device_info
*info
, const struct image_partition_entry
*parts
, size_t *len
) {
2057 for (i
= 0; parts
[i
].name
; i
++)
2058 *len
+= parts
[i
].size
;
2060 uint8_t *image
= malloc(*len
);
2062 error(1, errno
, "malloc");
2064 memset(image
, 0xff, *len
);
2068 size_t vendor_len
= strlen(info
->vendor
);
2069 put32(image
+0x14, vendor_len
);
2070 memcpy(image
+0x18, info
->vendor
, vendor_len
);
2073 put_partitions(image
+ 0x1014, info
->partitions
, parts
);
2074 put_md5(image
+0x04, image
+0x14, *len
-0x14);
2080 Generates the firmware image in sysupgrade format
2082 This makes some assumptions about the provided flash and image partition tables and
2083 should be generalized when TP-LINK starts building its safeloader into hardware with
2084 different flash layouts.
2086 static void * generate_sysupgrade_image(struct device_info
*info
, const struct image_partition_entry
*image_parts
, size_t *len
) {
2088 size_t flash_first_partition_index
= 0;
2089 size_t flash_last_partition_index
= 0;
2090 const struct flash_partition_entry
*flash_first_partition
= NULL
;
2091 const struct flash_partition_entry
*flash_last_partition
= NULL
;
2092 const struct image_partition_entry
*image_last_partition
= NULL
;
2094 /** Find first and last partitions */
2095 for (i
= 0; info
->partitions
[i
].name
; i
++) {
2096 if (!strcmp(info
->partitions
[i
].name
, info
->first_sysupgrade_partition
)) {
2097 flash_first_partition
= &info
->partitions
[i
];
2098 flash_first_partition_index
= i
;
2099 } else if (!strcmp(info
->partitions
[i
].name
, info
->last_sysupgrade_partition
)) {
2100 flash_last_partition
= &info
->partitions
[i
];
2101 flash_last_partition_index
= i
;
2105 assert(flash_first_partition
&& flash_last_partition
);
2106 assert(flash_first_partition_index
< flash_last_partition_index
);
2108 /** Find last partition from image to calculate needed size */
2109 for (i
= 0; image_parts
[i
].name
; i
++) {
2110 if (!strcmp(image_parts
[i
].name
, info
->last_sysupgrade_partition
)) {
2111 image_last_partition
= &image_parts
[i
];
2116 assert(image_last_partition
);
2118 *len
= flash_last_partition
->base
- flash_first_partition
->base
+ image_last_partition
->size
;
2120 uint8_t *image
= malloc(*len
);
2122 error(1, errno
, "malloc");
2124 memset(image
, 0xff, *len
);
2126 for (i
= flash_first_partition_index
; i
<= flash_last_partition_index
; i
++) {
2127 for (j
= 0; image_parts
[j
].name
; j
++) {
2128 if (!strcmp(info
->partitions
[i
].name
, image_parts
[j
].name
)) {
2129 if (image_parts
[j
].size
> info
->partitions
[i
].size
)
2130 error(1, 0, "%s partition too big (more than %u bytes)", info
->partitions
[i
].name
, (unsigned)info
->partitions
[i
].size
);
2131 memcpy(image
+ info
->partitions
[i
].base
- flash_first_partition
->base
, image_parts
[j
].data
, image_parts
[j
].size
);
2135 assert(image_parts
[j
].name
);
2142 /** Generates an image according to a given layout and writes it to a file */
2143 static void build_image(const char *output
,
2144 const char *kernel_image
,
2145 const char *rootfs_image
,
2149 struct device_info
*info
) {
2153 struct image_partition_entry parts
[7] = {};
2155 struct flash_partition_entry
*firmware_partition
= NULL
;
2156 struct flash_partition_entry
*os_image_partition
= NULL
;
2157 struct flash_partition_entry
*file_system_partition
= NULL
;
2158 size_t firmware_partition_index
= 0;
2160 for (i
= 0; info
->partitions
[i
].name
; i
++) {
2161 if (!strcmp(info
->partitions
[i
].name
, "firmware"))
2163 firmware_partition
= &info
->partitions
[i
];
2164 firmware_partition_index
= i
;
2168 if (firmware_partition
)
2170 os_image_partition
= &info
->partitions
[firmware_partition_index
];
2171 file_system_partition
= &info
->partitions
[firmware_partition_index
+ 1];
2174 if (stat(kernel_image
, &kernel
) < 0)
2175 error(1, errno
, "unable to stat file `%s'", kernel_image
);
2177 if (kernel
.st_size
> firmware_partition
->size
)
2178 error(1, 0, "kernel overflowed firmware partition\n");
2180 for (i
= MAX_PARTITIONS
-1; i
>= firmware_partition_index
+ 1; i
--)
2181 info
->partitions
[i
+1] = info
->partitions
[i
];
2183 file_system_partition
->name
= "file-system";
2184 file_system_partition
->base
= firmware_partition
->base
+ kernel
.st_size
;
2186 /* Align partition start to erase blocks for factory images only */
2188 file_system_partition
->base
= ALIGN(firmware_partition
->base
+ kernel
.st_size
, 0x10000);
2190 file_system_partition
->size
= firmware_partition
->size
- file_system_partition
->base
;
2192 os_image_partition
->name
= "os-image";
2193 os_image_partition
->size
= kernel
.st_size
;
2196 parts
[0] = make_partition_table(info
->partitions
);
2198 parts
[1] = make_soft_version_from_string(info
->soft_ver
);
2200 parts
[1] = make_soft_version(rev
);
2202 parts
[2] = make_support_list(info
);
2203 parts
[3] = read_file("os-image", kernel_image
, false, NULL
);
2204 parts
[4] = read_file("file-system", rootfs_image
, add_jffs2_eof
, file_system_partition
);
2206 /* Some devices need the extra-para partition to accept the firmware */
2207 if (strcasecmp(info
->id
, "ARCHER-C2-V3") == 0 ||
2208 strcasecmp(info
->id
, "ARCHER-C25-V1") == 0 ||
2209 strcasecmp(info
->id
, "ARCHER-C59-V2") == 0 ||
2210 strcasecmp(info
->id
, "ARCHER-C60-V2") == 0 ||
2211 strcasecmp(info
->id
, "ARCHER-C60-V3") == 0 ||
2212 strcasecmp(info
->id
, "TLWR1043NV5") == 0) {
2213 const char mdat
[11] = {0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00};
2214 parts
[5] = put_data("extra-para", mdat
, 11);
2215 } else if (strcasecmp(info
->id
, "ARCHER-A7-V5") == 0 || strcasecmp(info
->id
, "ARCHER-C7-V4") == 0 || strcasecmp(info
->id
, "ARCHER-C7-V5") == 0) {
2216 const char mdat
[11] = {0x01, 0x00, 0x00, 0x02, 0x00, 0x00, 0xca, 0x00, 0x01, 0x00, 0x00};
2217 parts
[5] = put_data("extra-para", mdat
, 11);
2218 } else if (strcasecmp(info
->id
, "ARCHER-C6-V2") == 0) {
2219 const char mdat
[11] = {0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00};
2220 parts
[5] = put_data("extra-para", mdat
, 11);
2221 } else if (strcasecmp(info
->id
, "ARCHER-C6-V2-US") == 0) {
2222 const char mdat
[11] = {0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x00};
2223 parts
[5] = put_data("extra-para", mdat
, 11);
2229 image
= generate_sysupgrade_image(info
, parts
, &len
);
2231 image
= generate_factory_image(info
, parts
, &len
);
2233 FILE *file
= fopen(output
, "wb");
2235 error(1, errno
, "unable to open output file");
2237 if (fwrite(image
, len
, 1, file
) != 1)
2238 error(1, 0, "unable to write output file");
2244 for (i
= 0; parts
[i
].name
; i
++)
2245 free_image_partition(parts
[i
]);
2249 static void usage(const char *argv0
) {
2251 "Usage: %s [OPTIONS...]\n"
2254 " -h show this help\n"
2256 "Create a new image:\n"
2257 " -B <board> create image for the board specified with <board>\n"
2258 " -k <file> read kernel image from the file <file>\n"
2259 " -r <file> read rootfs image from the file <file>\n"
2260 " -o <file> write output to the file <file>\n"
2261 " -V <rev> sets the revision number to <rev>\n"
2262 " -j add jffs2 end-of-filesystem markers\n"
2263 " -S create sysupgrade instead of factory image\n"
2264 "Extract an old image:\n"
2265 " -x <file> extract all oem firmware partition\n"
2266 " -d <dir> destination to extract the firmware partition\n"
2267 " -z <file> convert an oem firmware into a sysupgade file. Use -o for output file\n",
2273 static struct device_info
*find_board(const char *id
)
2275 struct device_info
*board
= NULL
;
2277 for (board
= boards
; board
->id
!= NULL
; board
++)
2278 if (strcasecmp(id
, board
->id
) == 0)
2284 static int add_flash_partition(
2285 struct flash_partition_entry
*part_list
,
2292 /* check if the list has a free entry */
2293 for (ptr
= 0; ptr
< max_entries
; ptr
++, part_list
++) {
2294 if (part_list
->name
== NULL
&&
2295 part_list
->base
== 0 &&
2296 part_list
->size
== 0)
2300 if (ptr
== max_entries
) {
2301 error(1, 0, "No free flash part entry available.");
2304 part_list
->name
= calloc(1, strlen(name
) + 1);
2305 if (!part_list
->name
) {
2306 error(1, 0, "Unable to allocate memory");
2309 memcpy((char *)part_list
->name
, name
, strlen(name
));
2310 part_list
->base
= base
;
2311 part_list
->size
= size
;
2316 /** read the partition table into struct flash_partition_entry */
2317 static int read_partition_table(
2318 FILE *file
, long offset
,
2319 struct flash_partition_entry
*entries
, size_t max_entries
,
2324 const char *parthdr
= NULL
;
2325 const char *fwuphdr
= "fwup-ptn";
2326 const char *flashhdr
= "partition";
2328 /* TODO: search for the partition table */
2338 error(1, 0, "Invalid partition table");
2341 if (fseek(file
, offset
, SEEK_SET
) < 0)
2342 error(1, errno
, "Can not seek in the firmware");
2344 if (fread(buf
, 2048, 1, file
) != 1)
2345 error(1, errno
, "Can not read fwup-ptn from the firmware");
2349 /* look for the partition header */
2350 if (memcmp(buf
, parthdr
, strlen(parthdr
)) != 0) {
2351 fprintf(stderr
, "DEBUG: can not find fwuphdr\n");
2356 end
= buf
+ sizeof(buf
);
2357 while ((ptr
+ strlen(parthdr
)) < end
&&
2358 memcmp(ptr
, parthdr
, strlen(parthdr
)) == 0) {
2362 char name
[32] = { 0 };
2364 unsigned long base
= 0;
2365 unsigned long size
= 0;
2367 end_part
= memchr(ptr
, '\n', (end
- ptr
));
2368 if (end_part
== NULL
) {
2369 /* in theory this should never happen, because a partition always ends with 0x09, 0x0D, 0x0A */
2373 for (int i
= 0; i
<= 4; i
++) {
2374 if (end_part
<= ptr
)
2377 end_element
= memchr(ptr
, 0x20, (end_part
- ptr
));
2378 if (end_element
== NULL
) {
2379 error(1, errno
, "Ignoring the rest of the partition entries.");
2384 /* partition header */
2386 ptr
= end_element
+ 1;
2390 name_len
= (end_element
- ptr
) > 31 ? 31 : (end_element
- ptr
);
2391 strncpy(name
, ptr
, name_len
);
2392 name
[name_len
] = '\0';
2393 ptr
= end_element
+ 1;
2398 ptr
= end_element
+ 1;
2403 base
= strtoul(ptr
, NULL
, 16);
2404 ptr
= end_element
+ 1;
2409 ptr
= end_element
+ 1;
2410 /* actual size. The last element doesn't have a sepeartor */
2411 size
= strtoul(ptr
, NULL
, 16);
2412 /* the part ends with 0x09, 0x0d, 0x0a */
2414 add_flash_partition(entries
, max_entries
, name
, base
, size
);
2423 static void write_partition(
2425 size_t firmware_offset
,
2426 struct flash_partition_entry
*entry
,
2432 fseek(input_file
, entry
->base
+ firmware_offset
, SEEK_SET
);
2434 for (offset
= 0; sizeof(buf
) + offset
<= entry
->size
; offset
+= sizeof(buf
)) {
2435 if (fread(buf
, sizeof(buf
), 1, input_file
) != 1)
2436 error(1, errno
, "Can not read partition from input_file");
2438 if (fwrite(buf
, sizeof(buf
), 1, output_file
) != 1)
2439 error(1, errno
, "Can not write partition to output_file");
2441 /* write last chunk smaller than buffer */
2442 if (offset
< entry
->size
) {
2443 offset
= entry
->size
- offset
;
2444 if (fread(buf
, offset
, 1, input_file
) != 1)
2445 error(1, errno
, "Can not read partition from input_file");
2446 if (fwrite(buf
, offset
, 1, output_file
) != 1)
2447 error(1, errno
, "Can not write partition to output_file");
2451 static int extract_firmware_partition(FILE *input_file
, size_t firmware_offset
, struct flash_partition_entry
*entry
, const char *output_directory
)
2454 char output
[PATH_MAX
];
2456 snprintf(output
, PATH_MAX
, "%s/%s", output_directory
, entry
->name
);
2457 output_file
= fopen(output
, "wb+");
2458 if (output_file
== NULL
) {
2459 error(1, errno
, "Can not open output file %s", output
);
2462 write_partition(input_file
, firmware_offset
, entry
, output_file
);
2464 fclose(output_file
);
2469 /** extract all partitions from the firmware file */
2470 static int extract_firmware(const char *input
, const char *output_directory
)
2472 struct flash_partition_entry entries
[16] = { 0 };
2473 size_t max_entries
= 16;
2474 size_t firmware_offset
= 0x1014;
2477 struct stat statbuf
;
2479 /* check input file */
2480 if (stat(input
, &statbuf
)) {
2481 error(1, errno
, "Can not read input firmware %s", input
);
2484 /* check if output directory exists */
2485 if (stat(output_directory
, &statbuf
)) {
2486 error(1, errno
, "Failed to stat output directory %s", output_directory
);
2489 if ((statbuf
.st_mode
& S_IFMT
) != S_IFDIR
) {
2490 error(1, errno
, "Given output directory is not a directory %s", output_directory
);
2493 input_file
= fopen(input
, "rb");
2495 if (read_partition_table(input_file
, firmware_offset
, entries
, 16, 0) != 0) {
2496 error(1, 0, "Error can not read the partition table (fwup-ptn)");
2499 for (size_t i
= 0; i
< max_entries
; i
++) {
2500 if (entries
[i
].name
== NULL
&&
2501 entries
[i
].base
== 0 &&
2502 entries
[i
].size
== 0)
2505 extract_firmware_partition(input_file
, firmware_offset
, &entries
[i
], output_directory
);
2511 static struct flash_partition_entry
*find_partition(
2512 struct flash_partition_entry
*entries
, size_t max_entries
,
2513 const char *name
, const char *error_msg
)
2515 for (size_t i
= 0; i
< max_entries
; i
++, entries
++) {
2516 if (strcmp(entries
->name
, name
) == 0)
2520 error(1, 0, "%s", error_msg
);
2524 static void write_ff(FILE *output_file
, size_t size
)
2529 memset(buf
, 0xff, sizeof(buf
));
2531 for (offset
= 0; offset
+ sizeof(buf
) < size
; offset
+= sizeof(buf
)) {
2532 if (fwrite(buf
, sizeof(buf
), 1, output_file
) != 1)
2533 error(1, errno
, "Can not write 0xff to output_file");
2536 /* write last chunk smaller than buffer */
2537 if (offset
< size
) {
2538 offset
= size
- offset
;
2539 if (fwrite(buf
, offset
, 1, output_file
) != 1)
2540 error(1, errno
, "Can not write partition to output_file");
2544 static void convert_firmware(const char *input
, const char *output
)
2546 struct flash_partition_entry fwup
[MAX_PARTITIONS
] = { 0 };
2547 struct flash_partition_entry flash
[MAX_PARTITIONS
] = { 0 };
2548 struct flash_partition_entry
*fwup_os_image
= NULL
, *fwup_file_system
= NULL
;
2549 struct flash_partition_entry
*flash_os_image
= NULL
, *flash_file_system
= NULL
;
2550 struct flash_partition_entry
*fwup_partition_table
= NULL
;
2551 size_t firmware_offset
= 0x1014;
2552 FILE *input_file
, *output_file
;
2554 struct stat statbuf
;
2556 /* check input file */
2557 if (stat(input
, &statbuf
)) {
2558 error(1, errno
, "Can not read input firmware %s", input
);
2561 input_file
= fopen(input
, "rb");
2563 error(1, 0, "Can not open input firmware %s", input
);
2565 output_file
= fopen(output
, "wb");
2567 error(1, 0, "Can not open output firmware %s", output
);
2569 if (read_partition_table(input_file
, firmware_offset
, fwup
, MAX_PARTITIONS
, 0) != 0) {
2570 error(1, 0, "Error can not read the partition table (fwup-ptn)");
2573 fwup_os_image
= find_partition(fwup
, MAX_PARTITIONS
,
2574 "os-image", "Error can not find os-image partition (fwup)");
2575 fwup_file_system
= find_partition(fwup
, MAX_PARTITIONS
,
2576 "file-system", "Error can not find file-system partition (fwup)");
2577 fwup_partition_table
= find_partition(fwup
, MAX_PARTITIONS
,
2578 "partition-table", "Error can not find partition-table partition");
2580 /* the flash partition table has a 0x00000004 magic haeder */
2581 if (read_partition_table(input_file
, firmware_offset
+ fwup_partition_table
->base
+ 4, flash
, MAX_PARTITIONS
, 1) != 0)
2582 error(1, 0, "Error can not read the partition table (flash)");
2584 flash_os_image
= find_partition(flash
, MAX_PARTITIONS
,
2585 "os-image", "Error can not find os-image partition (flash)");
2586 flash_file_system
= find_partition(flash
, MAX_PARTITIONS
,
2587 "file-system", "Error can not find file-system partition (flash)");
2589 /* write os_image to 0x0 */
2590 write_partition(input_file
, firmware_offset
, fwup_os_image
, output_file
);
2591 write_ff(output_file
, flash_os_image
->size
- fwup_os_image
->size
);
2593 /* write file-system behind os_image */
2594 fseek(output_file
, flash_file_system
->base
- flash_os_image
->base
, SEEK_SET
);
2595 write_partition(input_file
, firmware_offset
, fwup_file_system
, output_file
);
2596 write_ff(output_file
, flash_file_system
->size
- fwup_file_system
->size
);
2598 fclose(output_file
);
2602 int main(int argc
, char *argv
[]) {
2603 const char *board
= NULL
, *kernel_image
= NULL
, *rootfs_image
= NULL
, *output
= NULL
;
2604 const char *extract_image
= NULL
, *output_directory
= NULL
, *convert_image
= NULL
;
2605 bool add_jffs2_eof
= false, sysupgrade
= false;
2607 struct device_info
*info
;
2608 set_source_date_epoch();
2613 c
= getopt(argc
, argv
, "B:k:r:o:V:jSh:x:d:z:");
2623 kernel_image
= optarg
;
2627 rootfs_image
= optarg
;
2635 sscanf(optarg
, "r%u", &rev
);
2639 add_jffs2_eof
= true;
2651 output_directory
= optarg
;
2655 extract_image
= optarg
;
2659 convert_image
= optarg
;
2668 if (extract_image
|| output_directory
) {
2670 error(1, 0, "No factory/oem image given via -x <file>. Output directory is only valid with -x");
2671 if (!output_directory
)
2672 error(1, 0, "Can not extract an image without output directory. Use -d <dir>");
2673 extract_firmware(extract_image
, output_directory
);
2674 } else if (convert_image
) {
2676 error(1, 0, "Can not convert a factory/oem image into sysupgrade image without output file. Use -o <file>");
2677 convert_firmware(convert_image
, output
);
2680 error(1, 0, "no board has been specified");
2682 error(1, 0, "no kernel image has been specified");
2684 error(1, 0, "no rootfs image has been specified");
2686 error(1, 0, "no output filename has been specified");
2688 info
= find_board(board
);
2691 error(1, 0, "unsupported board %s", board
);
2693 build_image(output
, kernel_image
, rootfs_image
, rev
, add_jffs2_eof
, sysupgrade
, info
);