2 Copyright (c) 2014, Matthias Schiffer <mschiffer@universe-factory.net>
5 Redistribution and use in source and binary forms, with or without
6 modification, are permitted provided that the following conditions are met:
8 1. Redistributions of source code must retain the above copyright notice,
9 this list of conditions and the following disclaimer.
10 2. Redistributions in binary form must reproduce the above copyright notice,
11 this list of conditions and the following disclaimer in the documentation
12 and/or other materials provided with the distribution.
14 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
15 AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16 IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
17 DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
18 FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19 DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
20 SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
21 CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
22 OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
23 OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
30 Image generation tool for the TP-LINK SafeLoader as seen on
31 TP-LINK Pharos devices (CPE210/220/510/520)
45 #include <arpa/inet.h>
47 #include <sys/types.h>
54 #define ALIGN(x,a) ({ typeof(a) __a = (a); (((x) + __a - 1) & ~(__a - 1)); })
57 #define MAX_PARTITIONS 32
59 /** An image partition table entry */
60 struct image_partition_entry
{
66 /** A flash partition table entry */
67 struct flash_partition_entry
{
73 /** Firmware layout description */
77 const char *support_list
;
80 struct flash_partition_entry partitions
[MAX_PARTITIONS
+1];
81 const char *first_sysupgrade_partition
;
82 const char *last_sysupgrade_partition
;
85 /** The content of the soft-version structure */
86 struct __attribute__((__packed__
)) soft_version
{
90 uint8_t version_major
;
91 uint8_t version_minor
;
92 uint8_t version_patch
;
102 static const uint8_t jffs2_eof_mark
[4] = {0xde, 0xad, 0xc0, 0xde};
106 Salt for the MD5 hash
108 Fortunately, TP-LINK seems to use the same salt for most devices which use
109 the new image format.
111 static const uint8_t md5_salt
[16] = {
112 0x7a, 0x2b, 0x15, 0xed,
113 0x9b, 0x98, 0x59, 0x6d,
114 0xe5, 0x04, 0xab, 0x44,
115 0xac, 0x2a, 0x9f, 0x4e,
119 /** Firmware layout table */
120 static struct device_info boards
[] = {
121 /** Firmware layout for the CPE210/220 V1 */
124 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
127 "CPE210(TP-LINK|UN|N300-2):1.0\r\n"
128 "CPE210(TP-LINK|UN|N300-2):1.1\r\n"
129 "CPE210(TP-LINK|US|N300-2):1.1\r\n"
130 "CPE210(TP-LINK|EU|N300-2):1.1\r\n"
131 "CPE220(TP-LINK|UN|N300-2):1.1\r\n"
132 "CPE220(TP-LINK|US|N300-2):1.1\r\n"
133 "CPE220(TP-LINK|EU|N300-2):1.1\r\n",
134 .support_trail
= '\xff',
138 {"fs-uboot", 0x00000, 0x20000},
139 {"partition-table", 0x20000, 0x02000},
140 {"default-mac", 0x30000, 0x00020},
141 {"product-info", 0x31100, 0x00100},
142 {"signature", 0x32000, 0x00400},
143 {"os-image", 0x40000, 0x300000},
144 {"file-system", 0x340000, 0x470000},
145 {"soft-version", 0x7b0000, 0x00100},
146 {"support-list", 0x7b1000, 0x00400},
147 {"user-config", 0x7c0000, 0x10000},
148 {"default-config", 0x7d0000, 0x10000},
149 {"log", 0x7e0000, 0x10000},
150 {"radio", 0x7f0000, 0x10000},
154 .first_sysupgrade_partition
= "os-image",
155 .last_sysupgrade_partition
= "support-list",
158 /** Firmware layout for the CPE210 V2 */
161 .vendor
= "CPE210(TP-LINK|UN|N300-2|00000000):2.0\r\n",
164 "CPE210(TP-LINK|EU|N300-2|00000000):2.0\r\n"
165 "CPE210(TP-LINK|EU|N300-2|45550000):2.0\r\n"
166 "CPE210(TP-LINK|EU|N300-2|55530000):2.0\r\n"
167 "CPE210(TP-LINK|UN|N300-2|00000000):2.0\r\n"
168 "CPE210(TP-LINK|UN|N300-2|45550000):2.0\r\n"
169 "CPE210(TP-LINK|UN|N300-2|55530000):2.0\r\n"
170 "CPE210(TP-LINK|US|N300-2|55530000):2.0\r\n"
171 "CPE210(TP-LINK|UN|N300-2):2.0\r\n"
172 "CPE210(TP-LINK|EU|N300-2):2.0\r\n"
173 "CPE210(TP-LINK|US|N300-2):2.0\r\n",
174 .support_trail
= '\xff',
178 {"fs-uboot", 0x00000, 0x20000},
179 {"partition-table", 0x20000, 0x02000},
180 {"default-mac", 0x30000, 0x00020},
181 {"product-info", 0x31100, 0x00100},
182 {"device-info", 0x31400, 0x00400},
183 {"signature", 0x32000, 0x00400},
184 {"device-id", 0x33000, 0x00100},
185 {"firmware", 0x40000, 0x770000},
186 {"soft-version", 0x7b0000, 0x00100},
187 {"support-list", 0x7b1000, 0x01000},
188 {"user-config", 0x7c0000, 0x10000},
189 {"default-config", 0x7d0000, 0x10000},
190 {"log", 0x7e0000, 0x10000},
191 {"radio", 0x7f0000, 0x10000},
195 .first_sysupgrade_partition
= "os-image",
196 .last_sysupgrade_partition
= "support-list",
199 /** Firmware layout for the CPE210 V3 */
202 .vendor
= "CPE210(TP-LINK|UN|N300-2|00000000):3.0\r\n",
205 "CPE210(TP-LINK|EU|N300-2|45550000):3.0\r\n"
206 "CPE210(TP-LINK|UN|N300-2|00000000):3.0\r\n"
207 "CPE210(TP-LINK|US|N300-2|55530000):3.0\r\n"
208 "CPE210(TP-LINK|UN|N300-2):3.0\r\n"
209 "CPE210(TP-LINK|EU|N300-2):3.0\r\n"
210 "CPE210(TP-LINK|EU|N300-2|45550000):3.1\r\n"
211 "CPE210(TP-LINK|UN|N300-2|00000000):3.1\r\n"
212 "CPE210(TP-LINK|US|N300-2|55530000):3.1\r\n"
213 "CPE210(TP-LINK|EU|N300-2|45550000):3.20\r\n"
214 "CPE210(TP-LINK|UN|N300-2|00000000):3.20\r\n"
215 "CPE210(TP-LINK|US|N300-2|55530000):3.20\r\n",
216 .support_trail
= '\xff',
220 {"fs-uboot", 0x00000, 0x20000},
221 {"partition-table", 0x20000, 0x01000},
222 {"default-mac", 0x30000, 0x00020},
223 {"product-info", 0x31100, 0x00100},
224 {"device-info", 0x31400, 0x00400},
225 {"signature", 0x32000, 0x00400},
226 {"device-id", 0x33000, 0x00100},
227 {"firmware", 0x40000, 0x770000},
228 {"soft-version", 0x7b0000, 0x00100},
229 {"support-list", 0x7b1000, 0x01000},
230 {"user-config", 0x7c0000, 0x10000},
231 {"default-config", 0x7d0000, 0x10000},
232 {"log", 0x7e0000, 0x10000},
233 {"radio", 0x7f0000, 0x10000},
237 .first_sysupgrade_partition
= "os-image",
238 .last_sysupgrade_partition
= "support-list",
241 /** Firmware layout for the CPE220 V2 */
244 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
247 "CPE220(TP-LINK|EU|N300-2|00000000):2.0\r\n"
248 "CPE220(TP-LINK|EU|N300-2|45550000):2.0\r\n"
249 "CPE220(TP-LINK|EU|N300-2|55530000):2.0\r\n"
250 "CPE220(TP-LINK|UN|N300-2|00000000):2.0\r\n"
251 "CPE220(TP-LINK|UN|N300-2|45550000):2.0\r\n"
252 "CPE220(TP-LINK|UN|N300-2|55530000):2.0\r\n"
253 "CPE220(TP-LINK|US|N300-2|55530000):2.0\r\n"
254 "CPE220(TP-LINK|UN|N300-2):2.0\r\n"
255 "CPE220(TP-LINK|EU|N300-2):2.0\r\n"
256 "CPE220(TP-LINK|US|N300-2):2.0\r\n",
257 .support_trail
= '\xff',
261 {"fs-uboot", 0x00000, 0x20000},
262 {"partition-table", 0x20000, 0x02000},
263 {"default-mac", 0x30000, 0x00020},
264 {"product-info", 0x31100, 0x00100},
265 {"signature", 0x32000, 0x00400},
266 {"os-image", 0x40000, 0x300000},
267 {"file-system", 0x340000, 0x470000},
268 {"soft-version", 0x7b0000, 0x00100},
269 {"support-list", 0x7b1000, 0x00400},
270 {"user-config", 0x7c0000, 0x10000},
271 {"default-config", 0x7d0000, 0x10000},
272 {"log", 0x7e0000, 0x10000},
273 {"radio", 0x7f0000, 0x10000},
277 .first_sysupgrade_partition
= "os-image",
278 .last_sysupgrade_partition
= "support-list",
281 /** Firmware layout for the CPE220 V3 */
284 .vendor
= "CPE220(TP-LINK|UN|N300-2|00000000):3.0\r\n",
287 "CPE220(TP-LINK|EU|N300-2|00000000):3.0\r\n"
288 "CPE220(TP-LINK|EU|N300-2|45550000):3.0\r\n"
289 "CPE220(TP-LINK|EU|N300-2|55530000):3.0\r\n"
290 "CPE220(TP-LINK|UN|N300-2|00000000):3.0\r\n"
291 "CPE220(TP-LINK|UN|N300-2|45550000):3.0\r\n"
292 "CPE220(TP-LINK|UN|N300-2|55530000):3.0\r\n"
293 "CPE220(TP-LINK|US|N300-2|55530000):3.0\r\n"
294 "CPE220(TP-LINK|UN|N300-2):3.0\r\n"
295 "CPE220(TP-LINK|EU|N300-2):3.0\r\n"
296 "CPE220(TP-LINK|US|N300-2):3.0\r\n",
297 .support_trail
= '\xff',
301 {"fs-uboot", 0x00000, 0x20000},
302 {"partition-table", 0x20000, 0x02000},
303 {"default-mac", 0x30000, 0x00020},
304 {"product-info", 0x31100, 0x00100},
305 {"device-info", 0x31400, 0x00400},
306 {"signature", 0x32000, 0x00400},
307 {"device-id", 0x33000, 0x00100},
308 {"firmware", 0x40000, 0x770000},
309 {"soft-version", 0x7b0000, 0x00100},
310 {"support-list", 0x7b1000, 0x01000},
311 {"user-config", 0x7c0000, 0x10000},
312 {"default-config", 0x7d0000, 0x10000},
313 {"log", 0x7e0000, 0x10000},
314 {"radio", 0x7f0000, 0x10000},
318 .first_sysupgrade_partition
= "os-image",
319 .last_sysupgrade_partition
= "support-list",
322 /** Firmware layout for the CPE510/520 V1 */
325 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
328 "CPE510(TP-LINK|UN|N300-5):1.0\r\n"
329 "CPE510(TP-LINK|UN|N300-5):1.1\r\n"
330 "CPE510(TP-LINK|UN|N300-5):1.1\r\n"
331 "CPE510(TP-LINK|US|N300-5):1.1\r\n"
332 "CPE510(TP-LINK|EU|N300-5):1.1\r\n"
333 "CPE520(TP-LINK|UN|N300-5):1.1\r\n"
334 "CPE520(TP-LINK|US|N300-5):1.1\r\n"
335 "CPE520(TP-LINK|EU|N300-5):1.1\r\n",
336 .support_trail
= '\xff',
340 {"fs-uboot", 0x00000, 0x20000},
341 {"partition-table", 0x20000, 0x02000},
342 {"default-mac", 0x30000, 0x00020},
343 {"product-info", 0x31100, 0x00100},
344 {"signature", 0x32000, 0x00400},
345 {"os-image", 0x40000, 0x300000},
346 {"file-system", 0x340000, 0x470000},
347 {"soft-version", 0x7b0000, 0x00100},
348 {"support-list", 0x7b1000, 0x00400},
349 {"user-config", 0x7c0000, 0x10000},
350 {"default-config", 0x7d0000, 0x10000},
351 {"log", 0x7e0000, 0x10000},
352 {"radio", 0x7f0000, 0x10000},
356 .first_sysupgrade_partition
= "os-image",
357 .last_sysupgrade_partition
= "support-list",
360 /** Firmware layout for the CPE510 V2 */
363 .vendor
= "CPE510(TP-LINK|UN|N300-5):2.0\r\n",
366 "CPE510(TP-LINK|EU|N300-5|00000000):2.0\r\n"
367 "CPE510(TP-LINK|EU|N300-5|45550000):2.0\r\n"
368 "CPE510(TP-LINK|EU|N300-5|55530000):2.0\r\n"
369 "CPE510(TP-LINK|UN|N300-5|00000000):2.0\r\n"
370 "CPE510(TP-LINK|UN|N300-5|45550000):2.0\r\n"
371 "CPE510(TP-LINK|UN|N300-5|55530000):2.0\r\n"
372 "CPE510(TP-LINK|US|N300-5|00000000):2.0\r\n"
373 "CPE510(TP-LINK|US|N300-5|45550000):2.0\r\n"
374 "CPE510(TP-LINK|US|N300-5|55530000):2.0\r\n"
375 "CPE510(TP-LINK|UN|N300-5):2.0\r\n"
376 "CPE510(TP-LINK|EU|N300-5):2.0\r\n"
377 "CPE510(TP-LINK|US|N300-5):2.0\r\n",
378 .support_trail
= '\xff',
382 {"fs-uboot", 0x00000, 0x20000},
383 {"partition-table", 0x20000, 0x02000},
384 {"default-mac", 0x30000, 0x00020},
385 {"product-info", 0x31100, 0x00100},
386 {"signature", 0x32000, 0x00400},
387 {"os-image", 0x40000, 0x300000},
388 {"file-system", 0x340000, 0x470000},
389 {"soft-version", 0x7b0000, 0x00100},
390 {"support-list", 0x7b1000, 0x00400},
391 {"user-config", 0x7c0000, 0x10000},
392 {"default-config", 0x7d0000, 0x10000},
393 {"log", 0x7e0000, 0x10000},
394 {"radio", 0x7f0000, 0x10000},
398 .first_sysupgrade_partition
= "os-image",
399 .last_sysupgrade_partition
= "support-list",
402 /** Firmware layout for the CPE510 V3 */
405 .vendor
= "CPE510(TP-LINK|UN|N300-5):3.0\r\n",
408 "CPE510(TP-LINK|EU|N300-5|00000000):3.0\r\n"
409 "CPE510(TP-LINK|EU|N300-5|45550000):3.0\r\n"
410 "CPE510(TP-LINK|EU|N300-5|55530000):3.0\r\n"
411 "CPE510(TP-LINK|UN|N300-5|00000000):3.0\r\n"
412 "CPE510(TP-LINK|UN|N300-5|45550000):3.0\r\n"
413 "CPE510(TP-LINK|UN|N300-5|55530000):3.0\r\n"
414 "CPE510(TP-LINK|US|N300-5|00000000):3.0\r\n"
415 "CPE510(TP-LINK|US|N300-5|45550000):3.0\r\n"
416 "CPE510(TP-LINK|US|N300-5|55530000):3.0\r\n"
417 "CPE510(TP-LINK|UN|N300-5):3.0\r\n"
418 "CPE510(TP-LINK|EU|N300-5):3.0\r\n"
419 "CPE510(TP-LINK|US|N300-5):3.0\r\n",
420 .support_trail
= '\xff',
424 {"fs-uboot", 0x00000, 0x20000},
425 {"partition-table", 0x20000, 0x02000},
426 {"default-mac", 0x30000, 0x00020},
427 {"product-info", 0x31100, 0x00100},
428 {"signature", 0x32000, 0x00400},
429 {"os-image", 0x40000, 0x300000},
430 {"file-system", 0x340000, 0x470000},
431 {"soft-version", 0x7b0000, 0x00100},
432 {"support-list", 0x7b1000, 0x00400},
433 {"user-config", 0x7c0000, 0x10000},
434 {"default-config", 0x7d0000, 0x10000},
435 {"log", 0x7e0000, 0x10000},
436 {"radio", 0x7f0000, 0x10000},
440 .first_sysupgrade_partition
= "os-image",
441 .last_sysupgrade_partition
= "support-list",
444 /** Firmware layout for the CPE610V1 */
447 .vendor
= "CPE610(TP-LINK|UN|N300-5|00000000):1.0\r\n",
450 "CPE610(TP-LINK|EU|N300-5|00000000):1.0\r\n"
451 "CPE610(TP-LINK|EU|N300-5|45550000):1.0\r\n"
452 "CPE610(TP-LINK|EU|N300-5|55530000):1.0\r\n"
453 "CPE610(TP-LINK|UN|N300-5|00000000):1.0\r\n"
454 "CPE610(TP-LINK|UN|N300-5|45550000):1.0\r\n"
455 "CPE610(TP-LINK|UN|N300-5|55530000):1.0\r\n"
456 "CPE610(TP-LINK|US|N300-5|55530000):1.0\r\n"
457 "CPE610(TP-LINK|UN|N300-5):1.0\r\n"
458 "CPE610(TP-LINK|EU|N300-5):1.0\r\n"
459 "CPE610(TP-LINK|US|N300-5):1.0\r\n",
460 .support_trail
= '\xff',
464 {"fs-uboot", 0x00000, 0x20000},
465 {"partition-table", 0x20000, 0x02000},
466 {"default-mac", 0x30000, 0x00020},
467 {"product-info", 0x31100, 0x00100},
468 {"signature", 0x32000, 0x00400},
469 {"os-image", 0x40000, 0x300000},
470 {"file-system", 0x340000, 0x470000},
471 {"soft-version", 0x7b0000, 0x00100},
472 {"support-list", 0x7b1000, 0x00400},
473 {"user-config", 0x7c0000, 0x10000},
474 {"default-config", 0x7d0000, 0x10000},
475 {"log", 0x7e0000, 0x10000},
476 {"radio", 0x7f0000, 0x10000},
480 .first_sysupgrade_partition
= "os-image",
481 .last_sysupgrade_partition
= "support-list",
484 /** Firmware layout for the CPE610V2 */
487 .vendor
= "CPE610(TP-LINK|UN|N300-5|00000000):2.0\r\n",
490 "CPE610(TP-LINK|EU|N300-5|00000000):2.0\r\n"
491 "CPE610(TP-LINK|EU|N300-5|45550000):2.0\r\n"
492 "CPE610(TP-LINK|EU|N300-5|55530000):2.0\r\n"
493 "CPE610(TP-LINK|UN|N300-5|00000000):2.0\r\n"
494 "CPE610(TP-LINK|UN|N300-5|45550000):2.0\r\n"
495 "CPE610(TP-LINK|UN|N300-5|55530000):2.0\r\n"
496 "CPE610(TP-LINK|US|N300-5|55530000):2.0\r\n"
497 "CPE610(TP-LINK|UN|N300-5):2.0\r\n"
498 "CPE610(TP-LINK|EU|N300-5):2.0\r\n"
499 "CPE610(TP-LINK|US|N300-5):2.0\r\n",
500 .support_trail
= '\xff',
504 {"fs-uboot", 0x00000, 0x20000},
505 {"partition-table", 0x20000, 0x02000},
506 {"default-mac", 0x30000, 0x00020},
507 {"product-info", 0x31100, 0x00100},
508 {"signature", 0x32000, 0x00400},
509 {"os-image", 0x40000, 0x300000},
510 {"file-system", 0x340000, 0x470000},
511 {"soft-version", 0x7b0000, 0x00100},
512 {"support-list", 0x7b1000, 0x00400},
513 {"user-config", 0x7c0000, 0x10000},
514 {"default-config", 0x7d0000, 0x10000},
515 {"log", 0x7e0000, 0x10000},
516 {"radio", 0x7f0000, 0x10000},
520 .first_sysupgrade_partition
= "os-image",
521 .last_sysupgrade_partition
= "support-list",
526 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
529 "WBS210(TP-LINK|UN|N300-2):1.20\r\n"
530 "WBS210(TP-LINK|US|N300-2):1.20\r\n"
531 "WBS210(TP-LINK|EU|N300-2):1.20\r\n",
532 .support_trail
= '\xff',
536 {"fs-uboot", 0x00000, 0x20000},
537 {"partition-table", 0x20000, 0x02000},
538 {"default-mac", 0x30000, 0x00020},
539 {"product-info", 0x31100, 0x00100},
540 {"signature", 0x32000, 0x00400},
541 {"os-image", 0x40000, 0x300000},
542 {"file-system", 0x340000, 0x470000},
543 {"soft-version", 0x7b0000, 0x00100},
544 {"support-list", 0x7b1000, 0x00400},
545 {"user-config", 0x7c0000, 0x10000},
546 {"default-config", 0x7d0000, 0x10000},
547 {"log", 0x7e0000, 0x10000},
548 {"radio", 0x7f0000, 0x10000},
552 .first_sysupgrade_partition
= "os-image",
553 .last_sysupgrade_partition
= "support-list",
558 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
561 "WBS210(TP-LINK|UN|N300-2|00000000):2.0\r\n"
562 "WBS210(TP-LINK|US|N300-2|55530000):2.0\r\n"
563 "WBS210(TP-LINK|EU|N300-2|45550000):2.0\r\n",
564 .support_trail
= '\xff',
568 {"fs-uboot", 0x00000, 0x20000},
569 {"partition-table", 0x20000, 0x02000},
570 {"default-mac", 0x30000, 0x00020},
571 {"product-info", 0x31100, 0x00100},
572 {"signature", 0x32000, 0x00400},
573 {"os-image", 0x40000, 0x300000},
574 {"file-system", 0x340000, 0x470000},
575 {"soft-version", 0x7b0000, 0x00100},
576 {"support-list", 0x7b1000, 0x00400},
577 {"user-config", 0x7c0000, 0x10000},
578 {"default-config", 0x7d0000, 0x10000},
579 {"log", 0x7e0000, 0x10000},
580 {"radio", 0x7f0000, 0x10000},
584 .first_sysupgrade_partition
= "os-image",
585 .last_sysupgrade_partition
= "support-list",
590 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
593 "WBS510(TP-LINK|UN|N300-5):1.20\r\n"
594 "WBS510(TP-LINK|US|N300-5):1.20\r\n"
595 "WBS510(TP-LINK|EU|N300-5):1.20\r\n"
596 "WBS510(TP-LINK|CA|N300-5):1.20\r\n",
597 .support_trail
= '\xff',
601 {"fs-uboot", 0x00000, 0x20000},
602 {"partition-table", 0x20000, 0x02000},
603 {"default-mac", 0x30000, 0x00020},
604 {"product-info", 0x31100, 0x00100},
605 {"signature", 0x32000, 0x00400},
606 {"os-image", 0x40000, 0x300000},
607 {"file-system", 0x340000, 0x470000},
608 {"soft-version", 0x7b0000, 0x00100},
609 {"support-list", 0x7b1000, 0x00400},
610 {"user-config", 0x7c0000, 0x10000},
611 {"default-config", 0x7d0000, 0x10000},
612 {"log", 0x7e0000, 0x10000},
613 {"radio", 0x7f0000, 0x10000},
617 .first_sysupgrade_partition
= "os-image",
618 .last_sysupgrade_partition
= "support-list",
623 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
626 "WBS510(TP-LINK|UN|N300-5|00000000):2.0\r\n"
627 "WBS510(TP-LINK|US|N300-5|55530000):2.0\r\n"
628 "WBS510(TP-LINK|EU|N300-5|45550000):2.0\r\n"
629 "WBS510(TP-LINK|CA|N300-5|43410000):2.0\r\n",
630 .support_trail
= '\xff',
634 {"fs-uboot", 0x00000, 0x20000},
635 {"partition-table", 0x20000, 0x02000},
636 {"default-mac", 0x30000, 0x00020},
637 {"product-info", 0x31100, 0x00100},
638 {"signature", 0x32000, 0x00400},
639 {"os-image", 0x40000, 0x300000},
640 {"file-system", 0x340000, 0x470000},
641 {"soft-version", 0x7b0000, 0x00100},
642 {"support-list", 0x7b1000, 0x00400},
643 {"user-config", 0x7c0000, 0x10000},
644 {"default-config", 0x7d0000, 0x10000},
645 {"log", 0x7e0000, 0x10000},
646 {"radio", 0x7f0000, 0x10000},
650 .first_sysupgrade_partition
= "os-image",
651 .last_sysupgrade_partition
= "support-list",
654 /** Firmware layout for the C2600 */
660 "{product_name:Archer C2600,product_ver:1.0.0,special_id:00000000}\r\n",
661 .support_trail
= '\x00',
665 We use a bigger os-image partition than the stock images (and thus
666 smaller file-system), as our kernel doesn't fit in the stock firmware's
667 2 MB os-image since kernel 4.14.
670 {"SBL1", 0x00000, 0x20000},
671 {"MIBIB", 0x20000, 0x20000},
672 {"SBL2", 0x40000, 0x20000},
673 {"SBL3", 0x60000, 0x30000},
674 {"DDRCONFIG", 0x90000, 0x10000},
675 {"SSD", 0xa0000, 0x10000},
676 {"TZ", 0xb0000, 0x30000},
677 {"RPM", 0xe0000, 0x20000},
678 {"fs-uboot", 0x100000, 0x70000},
679 {"uboot-env", 0x170000, 0x40000},
680 {"radio", 0x1b0000, 0x40000},
681 {"os-image", 0x1f0000, 0x400000}, /* Stock: base 0x1f0000 size 0x200000 */
682 {"file-system", 0x5f0000, 0x1900000}, /* Stock: base 0x3f0000 size 0x1b00000 */
683 {"default-mac", 0x1ef0000, 0x00200},
684 {"pin", 0x1ef0200, 0x00200},
685 {"product-info", 0x1ef0400, 0x0fc00},
686 {"partition-table", 0x1f00000, 0x10000},
687 {"soft-version", 0x1f10000, 0x10000},
688 {"support-list", 0x1f20000, 0x10000},
689 {"profile", 0x1f30000, 0x10000},
690 {"default-config", 0x1f40000, 0x10000},
691 {"user-config", 0x1f50000, 0x40000},
692 {"qos-db", 0x1f90000, 0x40000},
693 {"usb-config", 0x1fd0000, 0x10000},
694 {"log", 0x1fe0000, 0x20000},
698 .first_sysupgrade_partition
= "os-image",
699 .last_sysupgrade_partition
= "file-system"
702 /** Firmware layout for the A7-V5 */
704 .id
= "ARCHER-A7-V5",
707 "{product_name:Archer A7,product_ver:5.0.0,special_id:45550000}\n"
708 "{product_name:Archer A7,product_ver:5.0.0,special_id:55530000}\n"
709 "{product_name:Archer A7,product_ver:5.0.0,special_id:43410000}\n"
710 "{product_name:Archer A7,product_ver:5.0.0,special_id:4A500000}\n"
711 "{product_name:Archer A7,product_ver:5.0.0,special_id:54570000}\n",
712 .support_trail
= '\x00',
713 .soft_ver
= "soft_ver:1.0.0\n",
715 /* We're using a dynamic kernel/rootfs split here */
717 {"factory-boot", 0x00000, 0x20000},
718 {"fs-uboot", 0x20000, 0x20000},
719 {"firmware", 0x40000, 0xec0000}, /* Stock: name os-image base 0x40000 size 0x120000 */
720 /* Stock: name file-system base 0x160000 size 0xda0000 */
721 {"default-mac", 0xf40000, 0x00200},
722 {"pin", 0xf40200, 0x00200},
723 {"device-id", 0xf40400, 0x00100},
724 {"product-info", 0xf40500, 0x0fb00},
725 {"soft-version", 0xf50000, 0x00100},
726 {"extra-para", 0xf51000, 0x01000},
727 {"support-list", 0xf52000, 0x0a000},
728 {"profile", 0xf5c000, 0x04000},
729 {"default-config", 0xf60000, 0x10000},
730 {"user-config", 0xf70000, 0x40000},
731 {"certificate", 0xfb0000, 0x10000},
732 {"partition-table", 0xfc0000, 0x10000},
733 {"log", 0xfd0000, 0x20000},
734 {"radio", 0xff0000, 0x10000},
738 .first_sysupgrade_partition
= "os-image",
739 .last_sysupgrade_partition
= "file-system",
742 /** Firmware layout for the C2v3 */
744 .id
= "ARCHER-C2-V3",
747 "{product_name:ArcherC2,product_ver:3.0.0,special_id:00000000}\n"
748 "{product_name:ArcherC2,product_ver:3.0.0,special_id:55530000}\n"
749 "{product_name:ArcherC2,product_ver:3.0.0,special_id:45550000}\n",
750 .support_trail
= '\x00',
751 .soft_ver
= "soft_ver:3.0.1\n",
753 /** We're using a dynamic kernel/rootfs split here */
756 {"factory-boot", 0x00000, 0x20000},
757 {"fs-uboot", 0x20000, 0x10000},
758 {"firmware", 0x30000, 0x7a0000},
759 {"user-config", 0x7d0000, 0x04000},
760 {"default-mac", 0x7e0000, 0x00100},
761 {"device-id", 0x7e0100, 0x00100},
762 {"extra-para", 0x7e0200, 0x00100},
763 {"pin", 0x7e0300, 0x00100},
764 {"support-list", 0x7e0400, 0x00400},
765 {"soft-version", 0x7e0800, 0x00400},
766 {"product-info", 0x7e0c00, 0x01400},
767 {"partition-table", 0x7e2000, 0x01000},
768 {"profile", 0x7e3000, 0x01000},
769 {"default-config", 0x7e4000, 0x04000},
770 {"merge-config", 0x7ec000, 0x02000},
771 {"qos-db", 0x7ee000, 0x02000},
772 {"radio", 0x7f0000, 0x10000},
776 .first_sysupgrade_partition
= "os-image",
777 .last_sysupgrade_partition
= "file-system",
780 /** Firmware layout for the C25v1 */
782 .id
= "ARCHER-C25-V1",
785 "{product_name:ArcherC25,product_ver:1.0.0,special_id:00000000}\n"
786 "{product_name:ArcherC25,product_ver:1.0.0,special_id:55530000}\n"
787 "{product_name:ArcherC25,product_ver:1.0.0,special_id:45550000}\n",
788 .support_trail
= '\x00',
789 .soft_ver
= "soft_ver:1.0.0\n",
791 /* We're using a dynamic kernel/rootfs split here */
793 {"factory-boot", 0x00000, 0x20000},
794 {"fs-uboot", 0x20000, 0x10000},
795 {"firmware", 0x30000, 0x7a0000}, /* Stock: name os-image base 0x30000 size 0x100000 */
796 /* Stock: name file-system base 0x130000 size 0x6a0000 */
797 {"user-config", 0x7d0000, 0x04000},
798 {"default-mac", 0x7e0000, 0x00100},
799 {"device-id", 0x7e0100, 0x00100},
800 {"extra-para", 0x7e0200, 0x00100},
801 {"pin", 0x7e0300, 0x00100},
802 {"support-list", 0x7e0400, 0x00400},
803 {"soft-version", 0x7e0800, 0x00400},
804 {"product-info", 0x7e0c00, 0x01400},
805 {"partition-table", 0x7e2000, 0x01000},
806 {"profile", 0x7e3000, 0x01000},
807 {"default-config", 0x7e4000, 0x04000},
808 {"merge-config", 0x7ec000, 0x02000},
809 {"qos-db", 0x7ee000, 0x02000},
810 {"radio", 0x7f0000, 0x10000},
814 .first_sysupgrade_partition
= "os-image",
815 .last_sysupgrade_partition
= "file-system",
818 /** Firmware layout for the C58v1 */
820 .id
= "ARCHER-C58-V1",
824 "{product_name:Archer C58,product_ver:1.0.0,special_id:00000000}\r\n"
825 "{product_name:Archer C58,product_ver:1.0.0,special_id:45550000}\r\n"
826 "{product_name:Archer C58,product_ver:1.0.0,special_id:55530000}\r\n",
827 .support_trail
= '\x00',
828 .soft_ver
= "soft_ver:1.0.0\n",
831 {"fs-uboot", 0x00000, 0x10000},
832 {"default-mac", 0x10000, 0x00200},
833 {"pin", 0x10200, 0x00200},
834 {"product-info", 0x10400, 0x00100},
835 {"partition-table", 0x10500, 0x00800},
836 {"soft-version", 0x11300, 0x00200},
837 {"support-list", 0x11500, 0x00100},
838 {"device-id", 0x11600, 0x00100},
839 {"profile", 0x11700, 0x03900},
840 {"default-config", 0x15000, 0x04000},
841 {"user-config", 0x19000, 0x04000},
842 {"firmware", 0x20000, 0x7c8000},
843 {"certyficate", 0x7e8000, 0x08000},
844 {"radio", 0x7f0000, 0x10000},
848 .first_sysupgrade_partition
= "os-image",
849 .last_sysupgrade_partition
= "file-system",
852 /** Firmware layout for the C59v1 */
854 .id
= "ARCHER-C59-V1",
858 "{product_name:Archer C59,product_ver:1.0.0,special_id:00000000}\r\n"
859 "{product_name:Archer C59,product_ver:1.0.0,special_id:45550000}\r\n"
860 "{product_name:Archer C59,product_ver:1.0.0,special_id:52550000}\r\n"
861 "{product_name:Archer C59,product_ver:1.0.0,special_id:55530000}\r\n",
862 .support_trail
= '\x00',
863 .soft_ver
= "soft_ver:1.0.0\n",
865 /* We're using a dynamic kernel/rootfs split here */
867 {"fs-uboot", 0x00000, 0x10000},
868 {"default-mac", 0x10000, 0x00200},
869 {"pin", 0x10200, 0x00200},
870 {"device-id", 0x10400, 0x00100},
871 {"product-info", 0x10500, 0x0fb00},
872 {"firmware", 0x20000, 0xe30000},
873 {"partition-table", 0xe50000, 0x10000},
874 {"soft-version", 0xe60000, 0x10000},
875 {"support-list", 0xe70000, 0x10000},
876 {"profile", 0xe80000, 0x10000},
877 {"default-config", 0xe90000, 0x10000},
878 {"user-config", 0xea0000, 0x40000},
879 {"usb-config", 0xee0000, 0x10000},
880 {"certificate", 0xef0000, 0x10000},
881 {"qos-db", 0xf00000, 0x40000},
882 {"log", 0xfe0000, 0x10000},
883 {"radio", 0xff0000, 0x10000},
887 .first_sysupgrade_partition
= "os-image",
888 .last_sysupgrade_partition
= "file-system",
891 /** Firmware layout for the C59v2 */
893 .id
= "ARCHER-C59-V2",
897 "{product_name:Archer C59,product_ver:2.0.0,special_id:00000000}\r\n"
898 "{product_name:Archer C59,product_ver:2.0.0,special_id:45550000}\r\n"
899 "{product_name:Archer C59,product_ver:2.0.0,special_id:55530000}\r\n",
900 .support_trail
= '\x00',
901 .soft_ver
= "soft_ver:2.0.0 Build 20161206 rel.7303\n",
903 /** We're using a dynamic kernel/rootfs split here */
905 {"factory-boot", 0x00000, 0x20000},
906 {"fs-uboot", 0x20000, 0x10000},
907 {"default-mac", 0x30000, 0x00200},
908 {"pin", 0x30200, 0x00200},
909 {"device-id", 0x30400, 0x00100},
910 {"product-info", 0x30500, 0x0fb00},
911 {"firmware", 0x40000, 0xe10000},
912 {"partition-table", 0xe50000, 0x10000},
913 {"soft-version", 0xe60000, 0x10000},
914 {"support-list", 0xe70000, 0x10000},
915 {"profile", 0xe80000, 0x10000},
916 {"default-config", 0xe90000, 0x10000},
917 {"user-config", 0xea0000, 0x40000},
918 {"usb-config", 0xee0000, 0x10000},
919 {"certificate", 0xef0000, 0x10000},
920 {"extra-para", 0xf00000, 0x10000},
921 {"qos-db", 0xf10000, 0x30000},
922 {"log", 0xfe0000, 0x10000},
923 {"radio", 0xff0000, 0x10000},
927 .first_sysupgrade_partition
= "os-image",
928 .last_sysupgrade_partition
= "file-system",
931 /** Firmware layout for the Archer C6 v2 (EU/RU/JP) */
933 .id
= "ARCHER-C6-V2",
937 "{product_name:Archer C6,product_ver:2.0.0,special_id:45550000}\r\n"
938 "{product_name:Archer C6,product_ver:2.0.0,special_id:52550000}\r\n"
939 "{product_name:Archer C6,product_ver:2.0.0,special_id:4A500000}\r\n",
940 .support_trail
= '\x00',
941 .soft_ver
= "soft_ver:1.9.1\n",
944 {"fs-uboot", 0x00000, 0x20000},
945 {"default-mac", 0x20000, 0x00200},
946 {"pin", 0x20200, 0x00100},
947 {"product-info", 0x20300, 0x00200},
948 {"device-id", 0x20500, 0x0fb00},
949 {"firmware", 0x30000, 0x7a9400},
950 {"soft-version", 0x7d9400, 0x00100},
951 {"extra-para", 0x7d9500, 0x00100},
952 {"support-list", 0x7d9600, 0x00200},
953 {"profile", 0x7d9800, 0x03000},
954 {"default-config", 0x7dc800, 0x03000},
955 {"partition-table", 0x7df800, 0x00800},
956 {"user-config", 0x7e0000, 0x0c000},
957 {"certificate", 0x7ec000, 0x04000},
958 {"radio", 0x7f0000, 0x10000},
962 .first_sysupgrade_partition
= "os-image",
963 .last_sysupgrade_partition
= "file-system",
966 /** Firmware layout for the Archer C6 v2 (US) and A6 v2 (US/TW) */
968 .id
= "ARCHER-C6-V2-US",
972 "{product_name:Archer A6,product_ver:2.0.0,special_id:55530000}\n"
973 "{product_name:Archer A6,product_ver:2.0.0,special_id:54570000}\n"
974 "{product_name:Archer C6,product_ver:2.0.0,special_id:55530000}\n",
975 .support_trail
= '\x00',
976 .soft_ver
= "soft_ver:1.9.1\n",
979 {"factory-boot", 0x00000, 0x20000},
980 {"default-mac", 0x20000, 0x00200},
981 {"pin", 0x20200, 0x00100},
982 {"product-info", 0x20300, 0x00200},
983 {"device-id", 0x20500, 0x0fb00},
984 {"fs-uboot", 0x30000, 0x20000},
985 {"firmware", 0x50000, 0xf89400},
986 {"soft-version", 0xfd9400, 0x00100},
987 {"extra-para", 0xfd9500, 0x00100},
988 {"support-list", 0xfd9600, 0x00200},
989 {"profile", 0xfd9800, 0x03000},
990 {"default-config", 0xfdc800, 0x03000},
991 {"partition-table", 0xfdf800, 0x00800},
992 {"user-config", 0xfe0000, 0x0c000},
993 {"certificate", 0xfec000, 0x04000},
994 {"radio", 0xff0000, 0x10000},
997 .first_sysupgrade_partition
= "os-image",
998 .last_sysupgrade_partition
= "file-system",
1001 /** Firmware layout for the C60v1 */
1003 .id
= "ARCHER-C60-V1",
1007 "{product_name:Archer C60,product_ver:1.0.0,special_id:00000000}\r\n"
1008 "{product_name:Archer C60,product_ver:1.0.0,special_id:45550000}\r\n"
1009 "{product_name:Archer C60,product_ver:1.0.0,special_id:55530000}\r\n",
1010 .support_trail
= '\x00',
1011 .soft_ver
= "soft_ver:1.0.0\n",
1014 {"fs-uboot", 0x00000, 0x10000},
1015 {"default-mac", 0x10000, 0x00200},
1016 {"pin", 0x10200, 0x00200},
1017 {"product-info", 0x10400, 0x00100},
1018 {"partition-table", 0x10500, 0x00800},
1019 {"soft-version", 0x11300, 0x00200},
1020 {"support-list", 0x11500, 0x00100},
1021 {"device-id", 0x11600, 0x00100},
1022 {"profile", 0x11700, 0x03900},
1023 {"default-config", 0x15000, 0x04000},
1024 {"user-config", 0x19000, 0x04000},
1025 {"firmware", 0x20000, 0x7c8000},
1026 {"certyficate", 0x7e8000, 0x08000},
1027 {"radio", 0x7f0000, 0x10000},
1031 .first_sysupgrade_partition
= "os-image",
1032 .last_sysupgrade_partition
= "file-system",
1035 /** Firmware layout for the C60v2 */
1037 .id
= "ARCHER-C60-V2",
1041 "{product_name:Archer C60,product_ver:2.0.0,special_id:42520000}\r\n"
1042 "{product_name:Archer C60,product_ver:2.0.0,special_id:45550000}\r\n"
1043 "{product_name:Archer C60,product_ver:2.0.0,special_id:55530000}\r\n",
1044 .support_trail
= '\x00',
1045 .soft_ver
= "soft_ver:2.0.0\n",
1048 {"factory-boot", 0x00000, 0x1fb00},
1049 {"default-mac", 0x1fb00, 0x00200},
1050 {"pin", 0x1fd00, 0x00100},
1051 {"product-info", 0x1fe00, 0x00100},
1052 {"device-id", 0x1ff00, 0x00100},
1053 {"fs-uboot", 0x20000, 0x10000},
1054 {"firmware", 0x30000, 0x7a0000},
1055 {"soft-version", 0x7d9500, 0x00100},
1056 {"support-list", 0x7d9600, 0x00100},
1057 {"extra-para", 0x7d9700, 0x00100},
1058 {"profile", 0x7d9800, 0x03000},
1059 {"default-config", 0x7dc800, 0x03000},
1060 {"partition-table", 0x7df800, 0x00800},
1061 {"user-config", 0x7e0000, 0x0c000},
1062 {"certificate", 0x7ec000, 0x04000},
1063 {"radio", 0x7f0000, 0x10000},
1067 .first_sysupgrade_partition
= "os-image",
1068 .last_sysupgrade_partition
= "file-system",
1071 /** Firmware layout for the C60v3 */
1073 .id
= "ARCHER-C60-V3",
1077 "{product_name:Archer C60,product_ver:3.0.0,special_id:42520000}\r\n"
1078 "{product_name:Archer C60,product_ver:3.0.0,special_id:45550000}\r\n"
1079 "{product_name:Archer C60,product_ver:3.0.0,special_id:55530000}\r\n",
1080 .support_trail
= '\x00',
1081 .soft_ver
= "soft_ver:3.0.0\n",
1084 {"factory-boot", 0x00000, 0x1fb00},
1085 {"default-mac", 0x1fb00, 0x00200},
1086 {"pin", 0x1fd00, 0x00100},
1087 {"product-info", 0x1fe00, 0x00100},
1088 {"device-id", 0x1ff00, 0x00100},
1089 {"fs-uboot", 0x20000, 0x10000},
1090 {"firmware", 0x30000, 0x7a0000},
1091 {"soft-version", 0x7d9500, 0x00100},
1092 {"support-list", 0x7d9600, 0x00100},
1093 {"extra-para", 0x7d9700, 0x00100},
1094 {"profile", 0x7d9800, 0x03000},
1095 {"default-config", 0x7dc800, 0x03000},
1096 {"partition-table", 0x7df800, 0x00800},
1097 {"user-config", 0x7e0000, 0x0c000},
1098 {"certificate", 0x7ec000, 0x04000},
1099 {"radio", 0x7f0000, 0x10000},
1103 .first_sysupgrade_partition
= "os-image",
1104 .last_sysupgrade_partition
= "file-system",
1107 /** Firmware layout for the C5 */
1109 .id
= "ARCHER-C5-V2",
1113 "{product_name:ArcherC5,product_ver:2.0.0,special_id:00000000}\r\n"
1114 "{product_name:ArcherC5,product_ver:2.0.0,special_id:55530000}\r\n"
1115 "{product_name:ArcherC5,product_ver:2.0.0,special_id:4A500000}\r\n", /* JP version */
1116 .support_trail
= '\x00',
1120 {"fs-uboot", 0x00000, 0x40000},
1121 {"os-image", 0x40000, 0x200000},
1122 {"file-system", 0x240000, 0xc00000},
1123 {"default-mac", 0xe40000, 0x00200},
1124 {"pin", 0xe40200, 0x00200},
1125 {"product-info", 0xe40400, 0x00200},
1126 {"partition-table", 0xe50000, 0x10000},
1127 {"soft-version", 0xe60000, 0x00200},
1128 {"support-list", 0xe61000, 0x0f000},
1129 {"profile", 0xe70000, 0x10000},
1130 {"default-config", 0xe80000, 0x10000},
1131 {"user-config", 0xe90000, 0x50000},
1132 {"log", 0xee0000, 0x100000},
1133 {"radio_bk", 0xfe0000, 0x10000},
1134 {"radio", 0xff0000, 0x10000},
1138 .first_sysupgrade_partition
= "os-image",
1139 .last_sysupgrade_partition
= "file-system"
1142 /** Firmware layout for the C7 */
1144 .id
= "ARCHER-C7-V4",
1147 "{product_name:Archer C7,product_ver:4.0.0,special_id:00000000}\n"
1148 "{product_name:Archer C7,product_ver:4.0.0,special_id:41550000}\n"
1149 "{product_name:Archer C7,product_ver:4.0.0,special_id:45550000}\n"
1150 "{product_name:Archer C7,product_ver:4.0.0,special_id:4B520000}\n"
1151 "{product_name:Archer C7,product_ver:4.0.0,special_id:42520000}\n"
1152 "{product_name:Archer C7,product_ver:4.0.0,special_id:4A500000}\n"
1153 "{product_name:Archer C7,product_ver:4.0.0,special_id:52550000}\n"
1154 "{product_name:Archer C7,product_ver:4.0.0,special_id:54570000}\n"
1155 "{product_name:Archer C7,product_ver:4.0.0,special_id:55530000}\n"
1156 "{product_name:Archer C7,product_ver:4.0.0,special_id:43410000}\n",
1157 .support_trail
= '\x00',
1158 .soft_ver
= "soft_ver:1.0.0\n",
1160 /* We're using a dynamic kernel/rootfs split here */
1162 {"factory-boot", 0x00000, 0x20000},
1163 {"fs-uboot", 0x20000, 0x20000},
1164 {"firmware", 0x40000, 0xEC0000}, /* Stock: name os-image base 0x40000 size 0x120000 */
1165 /* Stock: name file-system base 0x160000 size 0xda0000 */
1166 {"default-mac", 0xf00000, 0x00200},
1167 {"pin", 0xf00200, 0x00200},
1168 {"device-id", 0xf00400, 0x00100},
1169 {"product-info", 0xf00500, 0x0fb00},
1170 {"soft-version", 0xf10000, 0x00100},
1171 {"extra-para", 0xf11000, 0x01000},
1172 {"support-list", 0xf12000, 0x0a000},
1173 {"profile", 0xf1c000, 0x04000},
1174 {"default-config", 0xf20000, 0x10000},
1175 {"user-config", 0xf30000, 0x40000},
1176 {"qos-db", 0xf70000, 0x40000},
1177 {"certificate", 0xfb0000, 0x10000},
1178 {"partition-table", 0xfc0000, 0x10000},
1179 {"log", 0xfd0000, 0x20000},
1180 {"radio", 0xff0000, 0x10000},
1184 .first_sysupgrade_partition
= "os-image",
1185 .last_sysupgrade_partition
= "file-system",
1188 /** Firmware layout for the C7 v5*/
1190 .id
= "ARCHER-C7-V5",
1193 "{product_name:Archer C7,product_ver:5.0.0,special_id:00000000}\n"
1194 "{product_name:Archer C7,product_ver:5.0.0,special_id:45550000}\n"
1195 "{product_name:Archer C7,product_ver:5.0.0,special_id:55530000}\n"
1196 "{product_name:Archer C7,product_ver:5.0.0,special_id:43410000}\n"
1197 "{product_name:Archer C7,product_ver:5.0.0,special_id:4A500000}\n"
1198 "{product_name:Archer C7,product_ver:5.0.0,special_id:54570000}\n"
1199 "{product_name:Archer C7,product_ver:5.0.0,special_id:52550000}\n"
1200 "{product_name:Archer C7,product_ver:5.0.0,special_id:4B520000}\n",
1202 .support_trail
= '\x00',
1203 .soft_ver
= "soft_ver:1.0.0\n",
1205 /* We're using a dynamic kernel/rootfs split here */
1207 {"factory-boot", 0x00000, 0x20000},
1208 {"fs-uboot", 0x20000, 0x20000},
1209 {"partition-table", 0x40000, 0x10000},
1210 {"radio", 0x50000, 0x10000},
1211 {"default-mac", 0x60000, 0x00200},
1212 {"pin", 0x60200, 0x00200},
1213 {"device-id", 0x60400, 0x00100},
1214 {"product-info", 0x60500, 0x0fb00},
1215 {"soft-version", 0x70000, 0x01000},
1216 {"extra-para", 0x71000, 0x01000},
1217 {"support-list", 0x72000, 0x0a000},
1218 {"profile", 0x7c000, 0x04000},
1219 {"user-config", 0x80000, 0x40000},
1222 {"firmware", 0xc0000, 0xf00000}, /* Stock: name os-image base 0xc0000 size 0x120000 */
1223 /* Stock: name file-system base 0x1e0000 size 0xde0000 */
1225 {"log", 0xfc0000, 0x20000},
1226 {"certificate", 0xfe0000, 0x10000},
1227 {"default-config", 0xff0000, 0x10000},
1232 .first_sysupgrade_partition
= "os-image",
1233 .last_sysupgrade_partition
= "file-system",
1236 /** Firmware layout for the C9 */
1242 "{product_name:ArcherC9,"
1243 "product_ver:1.0.0,"
1244 "special_id:00000000}\n",
1245 .support_trail
= '\x00',
1249 {"fs-uboot", 0x00000, 0x40000},
1250 {"os-image", 0x40000, 0x200000},
1251 {"file-system", 0x240000, 0xc00000},
1252 {"default-mac", 0xe40000, 0x00200},
1253 {"pin", 0xe40200, 0x00200},
1254 {"product-info", 0xe40400, 0x00200},
1255 {"partition-table", 0xe50000, 0x10000},
1256 {"soft-version", 0xe60000, 0x00200},
1257 {"support-list", 0xe61000, 0x0f000},
1258 {"profile", 0xe70000, 0x10000},
1259 {"default-config", 0xe80000, 0x10000},
1260 {"user-config", 0xe90000, 0x50000},
1261 {"log", 0xee0000, 0x100000},
1262 {"radio_bk", 0xfe0000, 0x10000},
1263 {"radio", 0xff0000, 0x10000},
1267 .first_sysupgrade_partition
= "os-image",
1268 .last_sysupgrade_partition
= "file-system"
1271 /** Firmware layout for the EAP120 */
1274 .vendor
= "EAP120(TP-LINK|UN|N300-2):1.0\r\n",
1277 "EAP120(TP-LINK|UN|N300-2):1.0\r\n",
1278 .support_trail
= '\xff',
1282 {"fs-uboot", 0x00000, 0x20000},
1283 {"partition-table", 0x20000, 0x02000},
1284 {"default-mac", 0x30000, 0x00020},
1285 {"support-list", 0x31000, 0x00100},
1286 {"product-info", 0x31100, 0x00100},
1287 {"soft-version", 0x32000, 0x00100},
1288 {"os-image", 0x40000, 0x180000},
1289 {"file-system", 0x1c0000, 0x600000},
1290 {"user-config", 0x7c0000, 0x10000},
1291 {"backup-config", 0x7d0000, 0x10000},
1292 {"log", 0x7e0000, 0x10000},
1293 {"radio", 0x7f0000, 0x10000},
1297 .first_sysupgrade_partition
= "os-image",
1298 .last_sysupgrade_partition
= "file-system"
1301 /** Firmware layout for the TL-WA850RE v2 */
1303 .id
= "TLWA850REV2",
1307 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:55530000}\n"
1308 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:00000000}\n"
1309 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:55534100}\n"
1310 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:45550000}\n"
1311 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:4B520000}\n"
1312 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:42520000}\n"
1313 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:4A500000}\n"
1314 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:43410000}\n"
1315 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:41550000}\n"
1316 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:52550000}\n",
1317 .support_trail
= '\x00',
1321 576KB were moved from file-system to os-image
1322 in comparison to the stock image
1325 {"fs-uboot", 0x00000, 0x20000},
1326 {"firmware", 0x20000, 0x390000},
1327 {"partition-table", 0x3b0000, 0x02000},
1328 {"default-mac", 0x3c0000, 0x00020},
1329 {"pin", 0x3c0100, 0x00020},
1330 {"product-info", 0x3c1000, 0x01000},
1331 {"soft-version", 0x3c2000, 0x00100},
1332 {"support-list", 0x3c3000, 0x01000},
1333 {"profile", 0x3c4000, 0x08000},
1334 {"user-config", 0x3d0000, 0x10000},
1335 {"default-config", 0x3e0000, 0x10000},
1336 {"radio", 0x3f0000, 0x10000},
1340 .first_sysupgrade_partition
= "os-image",
1341 .last_sysupgrade_partition
= "file-system"
1344 /** Firmware layout for the TL-WA855RE v1 */
1346 .id
= "TLWA855REV1",
1350 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:00000000}\n"
1351 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:55530000}\n"
1352 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:45550000}\n"
1353 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:4B520000}\n"
1354 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:42520000}\n"
1355 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:4A500000}\n"
1356 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:43410000}\n"
1357 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:41550000}\n"
1358 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:52550000}\n",
1359 .support_trail
= '\x00',
1363 {"fs-uboot", 0x00000, 0x20000},
1364 {"os-image", 0x20000, 0x150000},
1365 {"file-system", 0x170000, 0x240000},
1366 {"partition-table", 0x3b0000, 0x02000},
1367 {"default-mac", 0x3c0000, 0x00020},
1368 {"pin", 0x3c0100, 0x00020},
1369 {"product-info", 0x3c1000, 0x01000},
1370 {"soft-version", 0x3c2000, 0x00100},
1371 {"support-list", 0x3c3000, 0x01000},
1372 {"profile", 0x3c4000, 0x08000},
1373 {"user-config", 0x3d0000, 0x10000},
1374 {"default-config", 0x3e0000, 0x10000},
1375 {"radio", 0x3f0000, 0x10000},
1379 .first_sysupgrade_partition
= "os-image",
1380 .last_sysupgrade_partition
= "file-system"
1383 /** Firmware layout for the TL-WPA8630P v2 (EU)*/
1385 .id
= "TL-WPA8630P-V2-EU",
1389 "{product_name:TL-WPA8630P,product_ver:2.0.0,special_id:45550000}\n",
1390 .support_trail
= '\x00',
1394 {"factory-uboot", 0x00000, 0x20000},
1395 {"fs-uboot", 0x20000, 0x20000},
1396 {"firmware", 0x40000, 0x5e0000},
1397 {"partition-table", 0x620000, 0x02000},
1398 {"default-mac", 0x630000, 0x00020},
1399 {"pin", 0x630100, 0x00020},
1400 {"device-id", 0x630200, 0x00030},
1401 {"product-info", 0x631100, 0x01000},
1402 {"extra-para", 0x632100, 0x01000},
1403 {"soft-version", 0x640000, 0x01000},
1404 {"support-list", 0x641000, 0x01000},
1405 {"profile", 0x642000, 0x08000},
1406 {"user-config", 0x650000, 0x10000},
1407 {"default-config", 0x660000, 0x10000},
1408 {"default-nvm", 0x670000, 0xc0000},
1409 {"default-pib", 0x730000, 0x40000},
1410 {"radio", 0x7f0000, 0x10000},
1414 .first_sysupgrade_partition
= "os-image",
1415 .last_sysupgrade_partition
= "file-system"
1418 /** Firmware layout for the TL-WPA8630P v2 (INT)*/
1420 .id
= "TL-WPA8630P-V2-INT",
1424 "{product_name:TL-WPA8630P,product_ver:2.0.0,special_id:41550000}\n"
1425 "{product_name:TL-WPA8630P,product_ver:2.0.0,special_id:44450000}\n"
1426 "{product_name:TL-WPA8630P,product_ver:2.1.0,special_id:41550000}\n",
1427 .support_trail
= '\x00',
1431 {"factory-uboot", 0x00000, 0x20000},
1432 {"fs-uboot", 0x20000, 0x20000},
1433 {"firmware", 0x40000, 0x5e0000},
1434 {"partition-table", 0x620000, 0x02000},
1435 {"extra-para", 0x632100, 0x01000},
1436 {"soft-version", 0x640000, 0x01000},
1437 {"support-list", 0x641000, 0x01000},
1438 {"profile", 0x642000, 0x08000},
1439 {"user-config", 0x650000, 0x10000},
1440 {"default-config", 0x660000, 0x10000},
1441 {"default-nvm", 0x670000, 0xc0000},
1442 {"default-pib", 0x730000, 0x40000},
1443 {"default-mac", 0x7e0000, 0x00020},
1444 {"pin", 0x7e0100, 0x00020},
1445 {"device-id", 0x7e0200, 0x00030},
1446 {"product-info", 0x7e1100, 0x01000},
1447 {"radio", 0x7f0000, 0x10000},
1451 .first_sysupgrade_partition
= "os-image",
1452 .last_sysupgrade_partition
= "file-system"
1455 /** Firmware layout for the TL-WR1043 v5 */
1457 .id
= "TLWR1043NV5",
1461 "{product_name:TL-WR1043N,product_ver:5.0.0,special_id:45550000}\n"
1462 "{product_name:TL-WR1043N,product_ver:5.0.0,special_id:55530000}\n",
1463 .support_trail
= '\x00',
1464 .soft_ver
= "soft_ver:1.0.0\n",
1466 {"factory-boot", 0x00000, 0x20000},
1467 {"fs-uboot", 0x20000, 0x20000},
1468 {"firmware", 0x40000, 0xec0000},
1469 {"default-mac", 0xf00000, 0x00200},
1470 {"pin", 0xf00200, 0x00200},
1471 {"device-id", 0xf00400, 0x00100},
1472 {"product-info", 0xf00500, 0x0fb00},
1473 {"soft-version", 0xf10000, 0x01000},
1474 {"extra-para", 0xf11000, 0x01000},
1475 {"support-list", 0xf12000, 0x0a000},
1476 {"profile", 0xf1c000, 0x04000},
1477 {"default-config", 0xf20000, 0x10000},
1478 {"user-config", 0xf30000, 0x40000},
1479 {"qos-db", 0xf70000, 0x40000},
1480 {"certificate", 0xfb0000, 0x10000},
1481 {"partition-table", 0xfc0000, 0x10000},
1482 {"log", 0xfd0000, 0x20000},
1483 {"radio", 0xff0000, 0x10000},
1486 .first_sysupgrade_partition
= "os-image",
1487 .last_sysupgrade_partition
= "file-system"
1490 /** Firmware layout for the TL-WR1043 v4 */
1492 .id
= "TLWR1043NDV4",
1496 "{product_name:TL-WR1043ND,product_ver:4.0.0,special_id:45550000}\n",
1497 .support_trail
= '\x00',
1500 /* We're using a dynamic kernel/rootfs split here */
1502 {"fs-uboot", 0x00000, 0x20000},
1503 {"firmware", 0x20000, 0xf30000},
1504 {"default-mac", 0xf50000, 0x00200},
1505 {"pin", 0xf50200, 0x00200},
1506 {"product-info", 0xf50400, 0x0fc00},
1507 {"soft-version", 0xf60000, 0x0b000},
1508 {"support-list", 0xf6b000, 0x04000},
1509 {"profile", 0xf70000, 0x04000},
1510 {"default-config", 0xf74000, 0x0b000},
1511 {"user-config", 0xf80000, 0x40000},
1512 {"partition-table", 0xfc0000, 0x10000},
1513 {"log", 0xfd0000, 0x20000},
1514 {"radio", 0xff0000, 0x10000},
1518 .first_sysupgrade_partition
= "os-image",
1519 .last_sysupgrade_partition
= "file-system"
1522 /** Firmware layout for the TL-WR902AC v1 */
1524 .id
= "TL-WR902AC-V1",
1528 "{product_name:TL-WR902AC,product_ver:1.0.0,special_id:45550000}\n"
1529 "{product_name:TL-WR902AC,product_ver:1.0.0,special_id:55530000}\n",
1530 .support_trail
= '\x00',
1534 384KB were moved from file-system to os-image
1535 in comparison to the stock image
1538 {"fs-uboot", 0x00000, 0x20000},
1539 {"firmware", 0x20000, 0x730000},
1540 {"default-mac", 0x750000, 0x00200},
1541 {"pin", 0x750200, 0x00200},
1542 {"product-info", 0x750400, 0x0fc00},
1543 {"soft-version", 0x760000, 0x0b000},
1544 {"support-list", 0x76b000, 0x04000},
1545 {"profile", 0x770000, 0x04000},
1546 {"default-config", 0x774000, 0x0b000},
1547 {"user-config", 0x780000, 0x40000},
1548 {"partition-table", 0x7c0000, 0x10000},
1549 {"log", 0x7d0000, 0x20000},
1550 {"radio", 0x7f0000, 0x10000},
1554 .first_sysupgrade_partition
= "os-image",
1555 .last_sysupgrade_partition
= "file-system",
1558 /** Firmware layout for the TL-WR942N V1 */
1564 "{product_name:TL-WR942N,product_ver:1.0.0,special_id:00000000}\r\n"
1565 "{product_name:TL-WR942N,product_ver:1.0.0,special_id:52550000}\r\n",
1566 .support_trail
= '\x00',
1570 {"fs-uboot", 0x00000, 0x20000},
1571 {"firmware", 0x20000, 0xe20000},
1572 {"default-mac", 0xe40000, 0x00200},
1573 {"pin", 0xe40200, 0x00200},
1574 {"product-info", 0xe40400, 0x0fc00},
1575 {"partition-table", 0xe50000, 0x10000},
1576 {"soft-version", 0xe60000, 0x10000},
1577 {"support-list", 0xe70000, 0x10000},
1578 {"profile", 0xe80000, 0x10000},
1579 {"default-config", 0xe90000, 0x10000},
1580 {"user-config", 0xea0000, 0x40000},
1581 {"qos-db", 0xee0000, 0x40000},
1582 {"certificate", 0xf20000, 0x10000},
1583 {"usb-config", 0xfb0000, 0x10000},
1584 {"log", 0xfc0000, 0x20000},
1585 {"radio-bk", 0xfe0000, 0x10000},
1586 {"radio", 0xff0000, 0x10000},
1590 .first_sysupgrade_partition
= "os-image",
1591 .last_sysupgrade_partition
= "file-system",
1594 /** Firmware layout for the RE200 v2 */
1600 "{product_name:RE200,product_ver:2.0.0,special_id:00000000}\n"
1601 "{product_name:RE200,product_ver:2.0.0,special_id:41520000}\n"
1602 "{product_name:RE200,product_ver:2.0.0,special_id:41550000}\n"
1603 "{product_name:RE200,product_ver:2.0.0,special_id:42520000}\n"
1604 "{product_name:RE200,product_ver:2.0.0,special_id:43410000}\n"
1605 "{product_name:RE200,product_ver:2.0.0,special_id:45530000}\n"
1606 "{product_name:RE200,product_ver:2.0.0,special_id:45550000}\n"
1607 "{product_name:RE200,product_ver:2.0.0,special_id:49440000}\n"
1608 "{product_name:RE200,product_ver:2.0.0,special_id:4a500000}\n"
1609 "{product_name:RE200,product_ver:2.0.0,special_id:4b520000}\n"
1610 "{product_name:RE200,product_ver:2.0.0,special_id:52550000}\n"
1611 "{product_name:RE200,product_ver:2.0.0,special_id:54570000}\n"
1612 "{product_name:RE200,product_ver:2.0.0,special_id:55530000}\n",
1613 .support_trail
= '\x00',
1617 {"fs-uboot", 0x00000, 0x20000},
1618 {"firmware", 0x20000, 0x7a0000},
1619 {"partition-table", 0x7c0000, 0x02000},
1620 {"default-mac", 0x7c2000, 0x00020},
1621 {"pin", 0x7c2100, 0x00020},
1622 {"product-info", 0x7c3100, 0x01000},
1623 {"soft-version", 0x7c4200, 0x01000},
1624 {"support-list", 0x7c5200, 0x01000},
1625 {"profile", 0x7c6200, 0x08000},
1626 {"config-info", 0x7ce200, 0x00400},
1627 {"user-config", 0x7d0000, 0x10000},
1628 {"default-config", 0x7e0000, 0x10000},
1629 {"radio", 0x7f0000, 0x10000},
1633 .first_sysupgrade_partition
= "os-image",
1634 .last_sysupgrade_partition
= "file-system"
1637 /** Firmware layout for the RE200 v3 */
1643 "{product_name:RE200,product_ver:3.0.0,special_id:00000000}\n"
1644 "{product_name:RE200,product_ver:3.0.0,special_id:41520000}\n"
1645 "{product_name:RE200,product_ver:3.0.0,special_id:41550000}\n"
1646 "{product_name:RE200,product_ver:3.0.0,special_id:42520000}\n"
1647 "{product_name:RE200,product_ver:3.0.0,special_id:43410000}\n"
1648 "{product_name:RE200,product_ver:3.0.0,special_id:45470000}\n"
1649 "{product_name:RE200,product_ver:3.0.0,special_id:45530000}\n"
1650 "{product_name:RE200,product_ver:3.0.0,special_id:45550000}\n"
1651 "{product_name:RE200,product_ver:3.0.0,special_id:49440000}\n"
1652 "{product_name:RE200,product_ver:3.0.0,special_id:4A500000}\n"
1653 "{product_name:RE200,product_ver:3.0.0,special_id:4B520000}\n"
1654 "{product_name:RE200,product_ver:3.0.0,special_id:52550000}\n"
1655 "{product_name:RE200,product_ver:3.0.0,special_id:54570000}\n"
1656 "{product_name:RE200,product_ver:3.0.0,special_id:55530000}\n",
1657 .support_trail
= '\x00',
1661 {"fs-uboot", 0x00000, 0x20000},
1662 {"firmware", 0x20000, 0x7a0000},
1663 {"partition-table", 0x7c0000, 0x02000},
1664 {"default-mac", 0x7c2000, 0x00020},
1665 {"pin", 0x7c2100, 0x00020},
1666 {"product-info", 0x7c3100, 0x01000},
1667 {"soft-version", 0x7c4200, 0x01000},
1668 {"support-list", 0x7c5200, 0x01000},
1669 {"profile", 0x7c6200, 0x08000},
1670 {"config-info", 0x7ce200, 0x00400},
1671 {"user-config", 0x7d0000, 0x10000},
1672 {"default-config", 0x7e0000, 0x10000},
1673 {"radio", 0x7f0000, 0x10000},
1677 .first_sysupgrade_partition
= "os-image",
1678 .last_sysupgrade_partition
= "file-system"
1681 /** Firmware layout for the RE220 v2 */
1687 "{product_name:RE220,product_ver:2.0.0,special_id:00000000}\n"
1688 "{product_name:RE220,product_ver:2.0.0,special_id:41520000}\n"
1689 "{product_name:RE220,product_ver:2.0.0,special_id:41550000}\n"
1690 "{product_name:RE220,product_ver:2.0.0,special_id:42520000}\n"
1691 "{product_name:RE220,product_ver:2.0.0,special_id:43410000}\n"
1692 "{product_name:RE220,product_ver:2.0.0,special_id:45530000}\n"
1693 "{product_name:RE220,product_ver:2.0.0,special_id:45550000}\n"
1694 "{product_name:RE220,product_ver:2.0.0,special_id:49440000}\n"
1695 "{product_name:RE220,product_ver:2.0.0,special_id:4a500000}\n"
1696 "{product_name:RE220,product_ver:2.0.0,special_id:4b520000}\n"
1697 "{product_name:RE220,product_ver:2.0.0,special_id:52550000}\n"
1698 "{product_name:RE220,product_ver:2.0.0,special_id:54570000}\n"
1699 "{product_name:RE220,product_ver:2.0.0,special_id:55530000}\n",
1700 .support_trail
= '\x00',
1704 {"fs-uboot", 0x00000, 0x20000},
1705 {"firmware", 0x20000, 0x7a0000},
1706 {"partition-table", 0x7c0000, 0x02000},
1707 {"default-mac", 0x7c2000, 0x00020},
1708 {"pin", 0x7c2100, 0x00020},
1709 {"product-info", 0x7c3100, 0x01000},
1710 {"soft-version", 0x7c4200, 0x01000},
1711 {"support-list", 0x7c5200, 0x01000},
1712 {"profile", 0x7c6200, 0x08000},
1713 {"config-info", 0x7ce200, 0x00400},
1714 {"user-config", 0x7d0000, 0x10000},
1715 {"default-config", 0x7e0000, 0x10000},
1716 {"radio", 0x7f0000, 0x10000},
1720 .first_sysupgrade_partition
= "os-image",
1721 .last_sysupgrade_partition
= "file-system"
1724 /** Firmware layout for the RE305 v1 */
1730 "{product_name:RE305,product_ver:1.0.0,special_id:45550000}\n"
1731 "{product_name:RE305,product_ver:1.0.0,special_id:55530000}\n"
1732 "{product_name:RE305,product_ver:1.0.0,special_id:4a500000}\n"
1733 "{product_name:RE305,product_ver:1.0.0,special_id:42520000}\n"
1734 "{product_name:RE305,product_ver:1.0.0,special_id:4b520000}\n"
1735 "{product_name:RE305,product_ver:1.0.0,special_id:41550000}\n"
1736 "{product_name:RE305,product_ver:1.0.0,special_id:43410000}\n",
1737 .support_trail
= '\x00',
1741 {"fs-uboot", 0x00000, 0x20000},
1742 {"firmware", 0x20000, 0x5e0000},
1743 {"partition-table", 0x600000, 0x02000},
1744 {"default-mac", 0x610000, 0x00020},
1745 {"pin", 0x610100, 0x00020},
1746 {"product-info", 0x611100, 0x01000},
1747 {"soft-version", 0x620000, 0x01000},
1748 {"support-list", 0x621000, 0x01000},
1749 {"profile", 0x622000, 0x08000},
1750 {"user-config", 0x630000, 0x10000},
1751 {"default-config", 0x640000, 0x10000},
1752 {"radio", 0x7f0000, 0x10000},
1756 .first_sysupgrade_partition
= "os-image",
1757 .last_sysupgrade_partition
= "file-system"
1760 /** Firmware layout for the RE350 v1 */
1766 "{product_name:RE350,product_ver:1.0.0,special_id:45550000}\n"
1767 "{product_name:RE350,product_ver:1.0.0,special_id:00000000}\n"
1768 "{product_name:RE350,product_ver:1.0.0,special_id:41550000}\n"
1769 "{product_name:RE350,product_ver:1.0.0,special_id:55530000}\n"
1770 "{product_name:RE350,product_ver:1.0.0,special_id:43410000}\n"
1771 "{product_name:RE350,product_ver:1.0.0,special_id:4b520000}\n"
1772 "{product_name:RE350,product_ver:1.0.0,special_id:4a500000}\n",
1773 .support_trail
= '\x00',
1776 /** We're using a dynamic kernel/rootfs split here */
1778 {"fs-uboot", 0x00000, 0x20000},
1779 {"firmware", 0x20000, 0x5e0000},
1780 {"partition-table", 0x600000, 0x02000},
1781 {"default-mac", 0x610000, 0x00020},
1782 {"pin", 0x610100, 0x00020},
1783 {"product-info", 0x611100, 0x01000},
1784 {"soft-version", 0x620000, 0x01000},
1785 {"support-list", 0x621000, 0x01000},
1786 {"profile", 0x622000, 0x08000},
1787 {"user-config", 0x630000, 0x10000},
1788 {"default-config", 0x640000, 0x10000},
1789 {"radio", 0x7f0000, 0x10000},
1793 .first_sysupgrade_partition
= "os-image",
1794 .last_sysupgrade_partition
= "file-system"
1797 /** Firmware layout for the RE350K v1 */
1803 "{product_name:RE350K,product_ver:1.0.0,special_id:00000000,product_region:US}\n",
1804 .support_trail
= '\x00',
1807 /** We're using a dynamic kernel/rootfs split here */
1809 {"fs-uboot", 0x00000, 0x20000},
1810 {"firmware", 0x20000, 0xd70000},
1811 {"partition-table", 0xd90000, 0x02000},
1812 {"default-mac", 0xda0000, 0x00020},
1813 {"pin", 0xda0100, 0x00020},
1814 {"product-info", 0xda1100, 0x01000},
1815 {"soft-version", 0xdb0000, 0x01000},
1816 {"support-list", 0xdb1000, 0x01000},
1817 {"profile", 0xdb2000, 0x08000},
1818 {"user-config", 0xdc0000, 0x10000},
1819 {"default-config", 0xdd0000, 0x10000},
1820 {"device-id", 0xde0000, 0x00108},
1821 {"radio", 0xff0000, 0x10000},
1825 .first_sysupgrade_partition
= "os-image",
1826 .last_sysupgrade_partition
= "file-system"
1829 /** Firmware layout for the RE355 */
1835 "{product_name:RE355,product_ver:1.0.0,special_id:00000000}\r\n"
1836 "{product_name:RE355,product_ver:1.0.0,special_id:55530000}\r\n"
1837 "{product_name:RE355,product_ver:1.0.0,special_id:45550000}\r\n"
1838 "{product_name:RE355,product_ver:1.0.0,special_id:4A500000}\r\n"
1839 "{product_name:RE355,product_ver:1.0.0,special_id:43410000}\r\n"
1840 "{product_name:RE355,product_ver:1.0.0,special_id:41550000}\r\n"
1841 "{product_name:RE355,product_ver:1.0.0,special_id:4B520000}\r\n"
1842 "{product_name:RE355,product_ver:1.0.0,special_id:55534100}\r\n",
1843 .support_trail
= '\x00',
1846 /* We're using a dynamic kernel/rootfs split here */
1848 {"fs-uboot", 0x00000, 0x20000},
1849 {"firmware", 0x20000, 0x5e0000},
1850 {"partition-table", 0x600000, 0x02000},
1851 {"default-mac", 0x610000, 0x00020},
1852 {"pin", 0x610100, 0x00020},
1853 {"product-info", 0x611100, 0x01000},
1854 {"soft-version", 0x620000, 0x01000},
1855 {"support-list", 0x621000, 0x01000},
1856 {"profile", 0x622000, 0x08000},
1857 {"user-config", 0x630000, 0x10000},
1858 {"default-config", 0x640000, 0x10000},
1859 {"radio", 0x7f0000, 0x10000},
1863 .first_sysupgrade_partition
= "os-image",
1864 .last_sysupgrade_partition
= "file-system"
1867 /** Firmware layout for the RE450 */
1873 "{product_name:RE450,product_ver:1.0.0,special_id:00000000}\r\n"
1874 "{product_name:RE450,product_ver:1.0.0,special_id:55530000}\r\n"
1875 "{product_name:RE450,product_ver:1.0.0,special_id:45550000}\r\n"
1876 "{product_name:RE450,product_ver:1.0.0,special_id:4A500000}\r\n"
1877 "{product_name:RE450,product_ver:1.0.0,special_id:43410000}\r\n"
1878 "{product_name:RE450,product_ver:1.0.0,special_id:41550000}\r\n"
1879 "{product_name:RE450,product_ver:1.0.0,special_id:4B520000}\r\n"
1880 "{product_name:RE450,product_ver:1.0.0,special_id:55534100}\r\n",
1881 .support_trail
= '\x00',
1884 /** We're using a dynamic kernel/rootfs split here */
1886 {"fs-uboot", 0x00000, 0x20000},
1887 {"firmware", 0x20000, 0x5e0000},
1888 {"partition-table", 0x600000, 0x02000},
1889 {"default-mac", 0x610000, 0x00020},
1890 {"pin", 0x610100, 0x00020},
1891 {"product-info", 0x611100, 0x01000},
1892 {"soft-version", 0x620000, 0x01000},
1893 {"support-list", 0x621000, 0x01000},
1894 {"profile", 0x622000, 0x08000},
1895 {"user-config", 0x630000, 0x10000},
1896 {"default-config", 0x640000, 0x10000},
1897 {"radio", 0x7f0000, 0x10000},
1901 .first_sysupgrade_partition
= "os-image",
1902 .last_sysupgrade_partition
= "file-system"
1905 /** Firmware layout for the RE450 v2 */
1911 "{product_name:RE450,product_ver:2.0.0,special_id:00000000}\r\n"
1912 "{product_name:RE450,product_ver:2.0.0,special_id:55530000}\r\n"
1913 "{product_name:RE450,product_ver:2.0.0,special_id:45550000}\r\n"
1914 "{product_name:RE450,product_ver:2.0.0,special_id:4A500000}\r\n"
1915 "{product_name:RE450,product_ver:2.0.0,special_id:43410000}\r\n"
1916 "{product_name:RE450,product_ver:2.0.0,special_id:41550000}\r\n"
1917 "{product_name:RE450,product_ver:2.0.0,special_id:41530000}\r\n"
1918 "{product_name:RE450,product_ver:2.0.0,special_id:4B520000}\r\n"
1919 "{product_name:RE450,product_ver:2.0.0,special_id:42520000}\r\n",
1920 .support_trail
= '\x00',
1923 /* We're using a dynamic kernel/rootfs split here */
1925 {"fs-uboot", 0x00000, 0x20000},
1926 {"firmware", 0x20000, 0x5e0000},
1927 {"partition-table", 0x600000, 0x02000},
1928 {"default-mac", 0x610000, 0x00020},
1929 {"pin", 0x610100, 0x00020},
1930 {"product-info", 0x611100, 0x01000},
1931 {"soft-version", 0x620000, 0x01000},
1932 {"support-list", 0x621000, 0x01000},
1933 {"profile", 0x622000, 0x08000},
1934 {"user-config", 0x630000, 0x10000},
1935 {"default-config", 0x640000, 0x10000},
1936 {"radio", 0x7f0000, 0x10000},
1940 .first_sysupgrade_partition
= "os-image",
1941 .last_sysupgrade_partition
= "file-system"
1944 /** Firmware layout for the RE450 v3 */
1950 "{product_name:RE450,product_ver:3.0.0,special_id:00000000}\r\n"
1951 "{product_name:RE450,product_ver:3.0.0,special_id:55530000}\r\n"
1952 "{product_name:RE450,product_ver:3.0.0,special_id:45550000}\r\n"
1953 "{product_name:RE450,product_ver:3.0.0,special_id:4A500000}\r\n"
1954 "{product_name:RE450,product_ver:3.0.0,special_id:43410000}\r\n"
1955 "{product_name:RE450,product_ver:3.0.0,special_id:41550000}\r\n"
1956 "{product_name:RE450,product_ver:3.0.0,special_id:41530000}\r\n"
1957 "{product_name:RE450,product_ver:3.0.0,special_id:4B520000}\r\n"
1958 "{product_name:RE450,product_ver:3.0.0,special_id:42520000}\r\n",
1959 .support_trail
= '\x00',
1962 /* We're using a dynamic kernel/rootfs split here */
1964 {"fs-uboot", 0x00000, 0x20000},
1965 {"default-mac", 0x20000, 0x00020},
1966 {"pin", 0x20020, 0x00020},
1967 {"product-info", 0x21000, 0x01000},
1968 {"partition-table", 0x22000, 0x02000},
1969 {"soft-version", 0x24000, 0x01000},
1970 {"support-list", 0x25000, 0x01000},
1971 {"profile", 0x26000, 0x08000},
1972 {"user-config", 0x2e000, 0x10000},
1973 {"default-config", 0x3e000, 0x10000},
1974 {"config-info", 0x4e000, 0x00400},
1975 {"firmware", 0x50000, 0x7a0000},
1976 {"radio", 0x7f0000, 0x10000},
1980 .first_sysupgrade_partition
= "os-image",
1981 .last_sysupgrade_partition
= "file-system"
1984 /** Firmware layout for the RE500 */
1990 "{product_name:RE500,product_ver:1.0.0,special_id:00000000}\r\n"
1991 "{product_name:RE500,product_ver:1.0.0,special_id:55530000}\r\n"
1992 "{product_name:RE500,product_ver:1.0.0,special_id:45550000}\r\n"
1993 "{product_name:RE500,product_ver:1.0.0,special_id:4A500000}\r\n"
1994 "{product_name:RE500,product_ver:1.0.0,special_id:43410000}\r\n"
1995 "{product_name:RE500,product_ver:1.0.0,special_id:41550000}\r\n"
1996 "{product_name:RE500,product_ver:1.0.0,special_id:41530000}\r\n",
1997 .support_trail
= '\x00',
2000 /* We're using a dynamic kernel/rootfs split here */
2002 {"fs-uboot", 0x00000, 0x20000},
2003 {"firmware", 0x20000, 0xde0000},
2004 {"partition-table", 0xe00000, 0x02000},
2005 {"default-mac", 0xe10000, 0x00020},
2006 {"pin", 0xe10100, 0x00020},
2007 {"product-info", 0xe11100, 0x01000},
2008 {"soft-version", 0xe20000, 0x01000},
2009 {"support-list", 0xe21000, 0x01000},
2010 {"profile", 0xe22000, 0x08000},
2011 {"user-config", 0xe30000, 0x10000},
2012 {"default-config", 0xe40000, 0x10000},
2013 {"radio", 0xff0000, 0x10000},
2017 .first_sysupgrade_partition
= "os-image",
2018 .last_sysupgrade_partition
= "file-system"
2021 /** Firmware layout for the RE650 */
2027 "{product_name:RE650,product_ver:1.0.0,special_id:00000000}\r\n"
2028 "{product_name:RE650,product_ver:1.0.0,special_id:55530000}\r\n"
2029 "{product_name:RE650,product_ver:1.0.0,special_id:45550000}\r\n"
2030 "{product_name:RE650,product_ver:1.0.0,special_id:4A500000}\r\n"
2031 "{product_name:RE650,product_ver:1.0.0,special_id:43410000}\r\n"
2032 "{product_name:RE650,product_ver:1.0.0,special_id:41550000}\r\n"
2033 "{product_name:RE650,product_ver:1.0.0,special_id:41530000}\r\n",
2034 .support_trail
= '\x00',
2037 /* We're using a dynamic kernel/rootfs split here */
2039 {"fs-uboot", 0x00000, 0x20000},
2040 {"firmware", 0x20000, 0xde0000},
2041 {"partition-table", 0xe00000, 0x02000},
2042 {"default-mac", 0xe10000, 0x00020},
2043 {"pin", 0xe10100, 0x00020},
2044 {"product-info", 0xe11100, 0x01000},
2045 {"soft-version", 0xe20000, 0x01000},
2046 {"support-list", 0xe21000, 0x01000},
2047 {"profile", 0xe22000, 0x08000},
2048 {"user-config", 0xe30000, 0x10000},
2049 {"default-config", 0xe40000, 0x10000},
2050 {"radio", 0xff0000, 0x10000},
2054 .first_sysupgrade_partition
= "os-image",
2055 .last_sysupgrade_partition
= "file-system"
2061 #define error(_ret, _errno, _str, ...) \
2063 fprintf(stderr, _str ": %s\n", ## __VA_ARGS__, \
2064 strerror(_errno)); \
2070 /** Stores a uint32 as big endian */
2071 static inline void put32(uint8_t *buf
, uint32_t val
) {
2078 /** Allocates a new image partition */
2079 static struct image_partition_entry
alloc_image_partition(const char *name
, size_t len
) {
2080 struct image_partition_entry entry
= {name
, len
, malloc(len
)};
2082 error(1, errno
, "malloc");
2087 /** Frees an image partition */
2088 static void free_image_partition(struct image_partition_entry entry
) {
2092 static time_t source_date_epoch
= -1;
2093 static void set_source_date_epoch() {
2094 char *env
= getenv("SOURCE_DATE_EPOCH");
2098 source_date_epoch
= strtoull(env
, &endptr
, 10);
2099 if (errno
|| (endptr
&& *endptr
!= '\0')) {
2100 fprintf(stderr
, "Invalid SOURCE_DATE_EPOCH");
2106 /** Generates the partition-table partition */
2107 static struct image_partition_entry
make_partition_table(const struct flash_partition_entry
*p
) {
2108 struct image_partition_entry entry
= alloc_image_partition("partition-table", 0x800);
2110 char *s
= (char *)entry
.data
, *end
= (char *)(s
+entry
.size
);
2118 for (i
= 0; p
[i
].name
; i
++) {
2120 size_t w
= snprintf(s
, len
, "partition %s base 0x%05x size 0x%05x\n", p
[i
].name
, p
[i
].base
, p
[i
].size
);
2123 error(1, 0, "flash partition table overflow?");
2130 memset(s
, 0xff, end
-s
);
2136 /** Generates a binary-coded decimal representation of an integer in the range [0, 99] */
2137 static inline uint8_t bcd(uint8_t v
) {
2138 return 0x10 * (v
/10) + v
%10;
2142 /** Generates the soft-version partition */
2143 static struct image_partition_entry
make_soft_version(uint32_t rev
) {
2144 struct image_partition_entry entry
= alloc_image_partition("soft-version", sizeof(struct soft_version
));
2145 struct soft_version
*s
= (struct soft_version
*)entry
.data
;
2149 if (source_date_epoch
!= -1)
2150 t
= source_date_epoch
;
2151 else if (time(&t
) == (time_t)(-1))
2152 error(1, errno
, "time");
2154 struct tm
*tm
= gmtime(&t
);
2156 /* Partition contents size, minus 8 byte header and trailing byte */
2157 s
->data_len
= htonl(entry
.size
-9);
2161 s
->version_major
= 0;
2162 s
->version_minor
= 0;
2163 s
->version_patch
= 0;
2165 s
->year_hi
= bcd((1900+tm
->tm_year
)/100);
2166 s
->year_lo
= bcd(tm
->tm_year
%100);
2167 s
->month
= bcd(tm
->tm_mon
+1);
2168 s
->day
= bcd(tm
->tm_mday
);
2169 s
->rev
= htonl(rev
);
2176 static struct image_partition_entry
make_soft_version_from_string(const char *soft_ver
) {
2177 /** String length _including_ the terminating zero byte */
2178 uint32_t ver_len
= strlen(soft_ver
) + 1;
2179 /** Partition contains 64 bit header, the version string, and one additional null byte */
2180 size_t partition_len
= 2*sizeof(uint32_t) + ver_len
+ 1;
2181 struct image_partition_entry entry
= alloc_image_partition("soft-version", partition_len
);
2183 uint32_t *len
= (uint32_t *)entry
.data
;
2184 len
[0] = htonl(ver_len
);
2186 memcpy(&len
[2], soft_ver
, ver_len
);
2188 entry
.data
[partition_len
- 1] = 0;
2193 /** Generates the support-list partition */
2194 static struct image_partition_entry
make_support_list(struct device_info
*info
) {
2195 size_t len
= strlen(info
->support_list
);
2196 struct image_partition_entry entry
= alloc_image_partition("support-list", len
+ 9);
2198 put32(entry
.data
, len
);
2199 memset(entry
.data
+4, 0, 4);
2200 memcpy(entry
.data
+8, info
->support_list
, len
);
2201 entry
.data
[len
+8] = info
->support_trail
;
2206 /** Creates a new image partition with an arbitrary name from a file */
2207 static struct image_partition_entry
read_file(const char *part_name
, const char *filename
, bool add_jffs2_eof
, struct flash_partition_entry
*file_system_partition
) {
2208 struct stat statbuf
;
2210 if (stat(filename
, &statbuf
) < 0)
2211 error(1, errno
, "unable to stat file `%s'", filename
);
2213 size_t len
= statbuf
.st_size
;
2215 if (add_jffs2_eof
) {
2216 if (file_system_partition
)
2217 len
= ALIGN(len
+ file_system_partition
->base
, 0x10000) + sizeof(jffs2_eof_mark
) - file_system_partition
->base
;
2219 len
= ALIGN(len
, 0x10000) + sizeof(jffs2_eof_mark
);
2222 struct image_partition_entry entry
= alloc_image_partition(part_name
, len
);
2224 FILE *file
= fopen(filename
, "rb");
2226 error(1, errno
, "unable to open file `%s'", filename
);
2228 if (fread(entry
.data
, statbuf
.st_size
, 1, file
) != 1)
2229 error(1, errno
, "unable to read file `%s'", filename
);
2231 if (add_jffs2_eof
) {
2232 uint8_t *eof
= entry
.data
+ statbuf
.st_size
, *end
= entry
.data
+entry
.size
;
2234 memset(eof
, 0xff, end
- eof
- sizeof(jffs2_eof_mark
));
2235 memcpy(end
- sizeof(jffs2_eof_mark
), jffs2_eof_mark
, sizeof(jffs2_eof_mark
));
2243 /** Creates a new image partition from arbitrary data */
2244 static struct image_partition_entry
put_data(const char *part_name
, const char *datain
, size_t len
) {
2246 struct image_partition_entry entry
= alloc_image_partition(part_name
, len
);
2248 memcpy(entry
.data
, datain
, len
);
2254 Copies a list of image partitions into an image buffer and generates the image partition table while doing so
2256 Example image partition table:
2258 fwup-ptn partition-table base 0x00800 size 0x00800
2259 fwup-ptn os-image base 0x01000 size 0x113b45
2260 fwup-ptn file-system base 0x114b45 size 0x1d0004
2261 fwup-ptn support-list base 0x2e4b49 size 0x000d1
2263 Each line of the partition table is terminated with the bytes 09 0d 0a ("\t\r\n"),
2264 the end of the partition table is marked with a zero byte.
2266 The firmware image must contain at least the partition-table and support-list partitions
2267 to be accepted. There aren't any alignment constraints for the image partitions.
2269 The partition-table partition contains the actual flash layout; partitions
2270 from the image partition table are mapped to the corresponding flash partitions during
2271 the firmware upgrade. The support-list partition contains a list of devices supported by
2274 The base offsets in the firmware partition table are relative to the end
2275 of the vendor information block, so the partition-table partition will
2276 actually start at offset 0x1814 of the image.
2278 I think partition-table must be the first partition in the firmware image.
2280 static void put_partitions(uint8_t *buffer
, const struct flash_partition_entry
*flash_parts
, const struct image_partition_entry
*parts
) {
2282 char *image_pt
= (char *)buffer
, *end
= image_pt
+ 0x800;
2284 size_t base
= 0x800;
2285 for (i
= 0; parts
[i
].name
; i
++) {
2286 for (j
= 0; flash_parts
[j
].name
; j
++) {
2287 if (!strcmp(flash_parts
[j
].name
, parts
[i
].name
)) {
2288 if (parts
[i
].size
> flash_parts
[j
].size
)
2289 error(1, 0, "%s partition too big (more than %u bytes)", flash_parts
[j
].name
, (unsigned)flash_parts
[j
].size
);
2294 assert(flash_parts
[j
].name
);
2296 memcpy(buffer
+ base
, parts
[i
].data
, parts
[i
].size
);
2298 size_t len
= end
-image_pt
;
2299 size_t w
= snprintf(image_pt
, len
, "fwup-ptn %s base 0x%05x size 0x%05x\t\r\n", parts
[i
].name
, (unsigned)base
, (unsigned)parts
[i
].size
);
2302 error(1, 0, "image partition table overflow?");
2306 base
+= parts
[i
].size
;
2310 /** Generates and writes the image MD5 checksum */
2311 static void put_md5(uint8_t *md5
, uint8_t *buffer
, unsigned int len
) {
2315 MD5_Update(&ctx
, md5_salt
, (unsigned int)sizeof(md5_salt
));
2316 MD5_Update(&ctx
, buffer
, len
);
2317 MD5_Final(md5
, &ctx
);
2322 Generates the firmware image in factory format
2328 0000-0003 Image size (4 bytes, big endian)
2329 0004-0013 MD5 hash (hash of a 16 byte salt and the image data starting with byte 0x14)
2330 0014-0017 Vendor information length (without padding) (4 bytes, big endian)
2331 0018-1013 Vendor information (4092 bytes, padded with 0xff; there seem to be older
2332 (VxWorks-based) TP-LINK devices which use a smaller vendor information block)
2333 1014-1813 Image partition table (2048 bytes, padded with 0xff)
2334 1814-xxxx Firmware partitions
2336 static void * generate_factory_image(struct device_info
*info
, const struct image_partition_entry
*parts
, size_t *len
) {
2340 for (i
= 0; parts
[i
].name
; i
++)
2341 *len
+= parts
[i
].size
;
2343 uint8_t *image
= malloc(*len
);
2345 error(1, errno
, "malloc");
2347 memset(image
, 0xff, *len
);
2351 size_t vendor_len
= strlen(info
->vendor
);
2352 put32(image
+0x14, vendor_len
);
2353 memcpy(image
+0x18, info
->vendor
, vendor_len
);
2356 put_partitions(image
+ 0x1014, info
->partitions
, parts
);
2357 put_md5(image
+0x04, image
+0x14, *len
-0x14);
2363 Generates the firmware image in sysupgrade format
2365 This makes some assumptions about the provided flash and image partition tables and
2366 should be generalized when TP-LINK starts building its safeloader into hardware with
2367 different flash layouts.
2369 static void * generate_sysupgrade_image(struct device_info
*info
, const struct image_partition_entry
*image_parts
, size_t *len
) {
2371 size_t flash_first_partition_index
= 0;
2372 size_t flash_last_partition_index
= 0;
2373 const struct flash_partition_entry
*flash_first_partition
= NULL
;
2374 const struct flash_partition_entry
*flash_last_partition
= NULL
;
2375 const struct image_partition_entry
*image_last_partition
= NULL
;
2377 /** Find first and last partitions */
2378 for (i
= 0; info
->partitions
[i
].name
; i
++) {
2379 if (!strcmp(info
->partitions
[i
].name
, info
->first_sysupgrade_partition
)) {
2380 flash_first_partition
= &info
->partitions
[i
];
2381 flash_first_partition_index
= i
;
2382 } else if (!strcmp(info
->partitions
[i
].name
, info
->last_sysupgrade_partition
)) {
2383 flash_last_partition
= &info
->partitions
[i
];
2384 flash_last_partition_index
= i
;
2388 assert(flash_first_partition
&& flash_last_partition
);
2389 assert(flash_first_partition_index
< flash_last_partition_index
);
2391 /** Find last partition from image to calculate needed size */
2392 for (i
= 0; image_parts
[i
].name
; i
++) {
2393 if (!strcmp(image_parts
[i
].name
, info
->last_sysupgrade_partition
)) {
2394 image_last_partition
= &image_parts
[i
];
2399 assert(image_last_partition
);
2401 *len
= flash_last_partition
->base
- flash_first_partition
->base
+ image_last_partition
->size
;
2403 uint8_t *image
= malloc(*len
);
2405 error(1, errno
, "malloc");
2407 memset(image
, 0xff, *len
);
2409 for (i
= flash_first_partition_index
; i
<= flash_last_partition_index
; i
++) {
2410 for (j
= 0; image_parts
[j
].name
; j
++) {
2411 if (!strcmp(info
->partitions
[i
].name
, image_parts
[j
].name
)) {
2412 if (image_parts
[j
].size
> info
->partitions
[i
].size
)
2413 error(1, 0, "%s partition too big (more than %u bytes)", info
->partitions
[i
].name
, (unsigned)info
->partitions
[i
].size
);
2414 memcpy(image
+ info
->partitions
[i
].base
- flash_first_partition
->base
, image_parts
[j
].data
, image_parts
[j
].size
);
2418 assert(image_parts
[j
].name
);
2425 /** Generates an image according to a given layout and writes it to a file */
2426 static void build_image(const char *output
,
2427 const char *kernel_image
,
2428 const char *rootfs_image
,
2432 struct device_info
*info
) {
2436 struct image_partition_entry parts
[7] = {};
2438 struct flash_partition_entry
*firmware_partition
= NULL
;
2439 struct flash_partition_entry
*os_image_partition
= NULL
;
2440 struct flash_partition_entry
*file_system_partition
= NULL
;
2441 size_t firmware_partition_index
= 0;
2443 for (i
= 0; info
->partitions
[i
].name
; i
++) {
2444 if (!strcmp(info
->partitions
[i
].name
, "firmware"))
2446 firmware_partition
= &info
->partitions
[i
];
2447 firmware_partition_index
= i
;
2451 if (firmware_partition
)
2453 os_image_partition
= &info
->partitions
[firmware_partition_index
];
2454 file_system_partition
= &info
->partitions
[firmware_partition_index
+ 1];
2457 if (stat(kernel_image
, &kernel
) < 0)
2458 error(1, errno
, "unable to stat file `%s'", kernel_image
);
2460 if (kernel
.st_size
> firmware_partition
->size
)
2461 error(1, 0, "kernel overflowed firmware partition\n");
2463 for (i
= MAX_PARTITIONS
-1; i
>= firmware_partition_index
+ 1; i
--)
2464 info
->partitions
[i
+1] = info
->partitions
[i
];
2466 file_system_partition
->name
= "file-system";
2467 file_system_partition
->base
= firmware_partition
->base
+ kernel
.st_size
;
2469 /* Align partition start to erase blocks for factory images only */
2471 file_system_partition
->base
= ALIGN(firmware_partition
->base
+ kernel
.st_size
, 0x10000);
2473 file_system_partition
->size
= firmware_partition
->size
- file_system_partition
->base
;
2475 os_image_partition
->name
= "os-image";
2476 os_image_partition
->size
= kernel
.st_size
;
2479 parts
[0] = make_partition_table(info
->partitions
);
2481 parts
[1] = make_soft_version_from_string(info
->soft_ver
);
2483 parts
[1] = make_soft_version(rev
);
2485 parts
[2] = make_support_list(info
);
2486 parts
[3] = read_file("os-image", kernel_image
, false, NULL
);
2487 parts
[4] = read_file("file-system", rootfs_image
, add_jffs2_eof
, file_system_partition
);
2489 /* Some devices need the extra-para partition to accept the firmware */
2490 if (strcasecmp(info
->id
, "ARCHER-C2-V3") == 0 ||
2491 strcasecmp(info
->id
, "ARCHER-C25-V1") == 0 ||
2492 strcasecmp(info
->id
, "ARCHER-C59-V2") == 0 ||
2493 strcasecmp(info
->id
, "ARCHER-C60-V2") == 0 ||
2494 strcasecmp(info
->id
, "ARCHER-C60-V3") == 0 ||
2495 strcasecmp(info
->id
, "TLWR1043NV5") == 0) {
2496 const char mdat
[11] = {0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00};
2497 parts
[5] = put_data("extra-para", mdat
, 11);
2498 } else if (strcasecmp(info
->id
, "ARCHER-A7-V5") == 0 || strcasecmp(info
->id
, "ARCHER-C7-V4") == 0 || strcasecmp(info
->id
, "ARCHER-C7-V5") == 0) {
2499 const char mdat
[11] = {0x01, 0x00, 0x00, 0x02, 0x00, 0x00, 0xca, 0x00, 0x01, 0x00, 0x00};
2500 parts
[5] = put_data("extra-para", mdat
, 11);
2501 } else if (strcasecmp(info
->id
, "ARCHER-C6-V2") == 0) {
2502 const char mdat
[11] = {0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00};
2503 parts
[5] = put_data("extra-para", mdat
, 11);
2504 } else if (strcasecmp(info
->id
, "ARCHER-C6-V2-US") == 0) {
2505 const char mdat
[11] = {0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x00};
2506 parts
[5] = put_data("extra-para", mdat
, 11);
2512 image
= generate_sysupgrade_image(info
, parts
, &len
);
2514 image
= generate_factory_image(info
, parts
, &len
);
2516 FILE *file
= fopen(output
, "wb");
2518 error(1, errno
, "unable to open output file");
2520 if (fwrite(image
, len
, 1, file
) != 1)
2521 error(1, 0, "unable to write output file");
2527 for (i
= 0; parts
[i
].name
; i
++)
2528 free_image_partition(parts
[i
]);
2532 static void usage(const char *argv0
) {
2534 "Usage: %s [OPTIONS...]\n"
2537 " -h show this help\n"
2539 "Create a new image:\n"
2540 " -B <board> create image for the board specified with <board>\n"
2541 " -k <file> read kernel image from the file <file>\n"
2542 " -r <file> read rootfs image from the file <file>\n"
2543 " -o <file> write output to the file <file>\n"
2544 " -V <rev> sets the revision number to <rev>\n"
2545 " -j add jffs2 end-of-filesystem markers\n"
2546 " -S create sysupgrade instead of factory image\n"
2547 "Extract an old image:\n"
2548 " -x <file> extract all oem firmware partition\n"
2549 " -d <dir> destination to extract the firmware partition\n"
2550 " -z <file> convert an oem firmware into a sysupgade file. Use -o for output file\n",
2556 static struct device_info
*find_board(const char *id
)
2558 struct device_info
*board
= NULL
;
2560 for (board
= boards
; board
->id
!= NULL
; board
++)
2561 if (strcasecmp(id
, board
->id
) == 0)
2567 static int add_flash_partition(
2568 struct flash_partition_entry
*part_list
,
2575 /* check if the list has a free entry */
2576 for (ptr
= 0; ptr
< max_entries
; ptr
++, part_list
++) {
2577 if (part_list
->name
== NULL
&&
2578 part_list
->base
== 0 &&
2579 part_list
->size
== 0)
2583 if (ptr
== max_entries
) {
2584 error(1, 0, "No free flash part entry available.");
2587 part_list
->name
= calloc(1, strlen(name
) + 1);
2588 if (!part_list
->name
) {
2589 error(1, 0, "Unable to allocate memory");
2592 memcpy((char *)part_list
->name
, name
, strlen(name
));
2593 part_list
->base
= base
;
2594 part_list
->size
= size
;
2599 /** read the partition table into struct flash_partition_entry */
2600 static int read_partition_table(
2601 FILE *file
, long offset
,
2602 struct flash_partition_entry
*entries
, size_t max_entries
,
2607 const char *parthdr
= NULL
;
2608 const char *fwuphdr
= "fwup-ptn";
2609 const char *flashhdr
= "partition";
2611 /* TODO: search for the partition table */
2621 error(1, 0, "Invalid partition table");
2624 if (fseek(file
, offset
, SEEK_SET
) < 0)
2625 error(1, errno
, "Can not seek in the firmware");
2627 if (fread(buf
, 2048, 1, file
) != 1)
2628 error(1, errno
, "Can not read fwup-ptn from the firmware");
2632 /* look for the partition header */
2633 if (memcmp(buf
, parthdr
, strlen(parthdr
)) != 0) {
2634 fprintf(stderr
, "DEBUG: can not find fwuphdr\n");
2639 end
= buf
+ sizeof(buf
);
2640 while ((ptr
+ strlen(parthdr
)) < end
&&
2641 memcmp(ptr
, parthdr
, strlen(parthdr
)) == 0) {
2645 char name
[32] = { 0 };
2647 unsigned long base
= 0;
2648 unsigned long size
= 0;
2650 end_part
= memchr(ptr
, '\n', (end
- ptr
));
2651 if (end_part
== NULL
) {
2652 /* in theory this should never happen, because a partition always ends with 0x09, 0x0D, 0x0A */
2656 for (int i
= 0; i
<= 4; i
++) {
2657 if (end_part
<= ptr
)
2660 end_element
= memchr(ptr
, 0x20, (end_part
- ptr
));
2661 if (end_element
== NULL
) {
2662 error(1, errno
, "Ignoring the rest of the partition entries.");
2667 /* partition header */
2669 ptr
= end_element
+ 1;
2673 name_len
= (end_element
- ptr
) > 31 ? 31 : (end_element
- ptr
);
2674 strncpy(name
, ptr
, name_len
);
2675 name
[name_len
] = '\0';
2676 ptr
= end_element
+ 1;
2681 ptr
= end_element
+ 1;
2686 base
= strtoul(ptr
, NULL
, 16);
2687 ptr
= end_element
+ 1;
2692 ptr
= end_element
+ 1;
2693 /* actual size. The last element doesn't have a sepeartor */
2694 size
= strtoul(ptr
, NULL
, 16);
2695 /* the part ends with 0x09, 0x0d, 0x0a */
2697 add_flash_partition(entries
, max_entries
, name
, base
, size
);
2706 static void write_partition(
2708 size_t firmware_offset
,
2709 struct flash_partition_entry
*entry
,
2715 fseek(input_file
, entry
->base
+ firmware_offset
, SEEK_SET
);
2717 for (offset
= 0; sizeof(buf
) + offset
<= entry
->size
; offset
+= sizeof(buf
)) {
2718 if (fread(buf
, sizeof(buf
), 1, input_file
) != 1)
2719 error(1, errno
, "Can not read partition from input_file");
2721 if (fwrite(buf
, sizeof(buf
), 1, output_file
) != 1)
2722 error(1, errno
, "Can not write partition to output_file");
2724 /* write last chunk smaller than buffer */
2725 if (offset
< entry
->size
) {
2726 offset
= entry
->size
- offset
;
2727 if (fread(buf
, offset
, 1, input_file
) != 1)
2728 error(1, errno
, "Can not read partition from input_file");
2729 if (fwrite(buf
, offset
, 1, output_file
) != 1)
2730 error(1, errno
, "Can not write partition to output_file");
2734 static int extract_firmware_partition(FILE *input_file
, size_t firmware_offset
, struct flash_partition_entry
*entry
, const char *output_directory
)
2737 char output
[PATH_MAX
];
2739 snprintf(output
, PATH_MAX
, "%s/%s", output_directory
, entry
->name
);
2740 output_file
= fopen(output
, "wb+");
2741 if (output_file
== NULL
) {
2742 error(1, errno
, "Can not open output file %s", output
);
2745 write_partition(input_file
, firmware_offset
, entry
, output_file
);
2747 fclose(output_file
);
2752 /** extract all partitions from the firmware file */
2753 static int extract_firmware(const char *input
, const char *output_directory
)
2755 struct flash_partition_entry entries
[16] = { 0 };
2756 size_t max_entries
= 16;
2757 size_t firmware_offset
= 0x1014;
2760 struct stat statbuf
;
2762 /* check input file */
2763 if (stat(input
, &statbuf
)) {
2764 error(1, errno
, "Can not read input firmware %s", input
);
2767 /* check if output directory exists */
2768 if (stat(output_directory
, &statbuf
)) {
2769 error(1, errno
, "Failed to stat output directory %s", output_directory
);
2772 if ((statbuf
.st_mode
& S_IFMT
) != S_IFDIR
) {
2773 error(1, errno
, "Given output directory is not a directory %s", output_directory
);
2776 input_file
= fopen(input
, "rb");
2778 if (read_partition_table(input_file
, firmware_offset
, entries
, 16, 0) != 0) {
2779 error(1, 0, "Error can not read the partition table (fwup-ptn)");
2782 for (size_t i
= 0; i
< max_entries
; i
++) {
2783 if (entries
[i
].name
== NULL
&&
2784 entries
[i
].base
== 0 &&
2785 entries
[i
].size
== 0)
2788 extract_firmware_partition(input_file
, firmware_offset
, &entries
[i
], output_directory
);
2794 static struct flash_partition_entry
*find_partition(
2795 struct flash_partition_entry
*entries
, size_t max_entries
,
2796 const char *name
, const char *error_msg
)
2798 for (size_t i
= 0; i
< max_entries
; i
++, entries
++) {
2799 if (strcmp(entries
->name
, name
) == 0)
2803 error(1, 0, "%s", error_msg
);
2807 static void write_ff(FILE *output_file
, size_t size
)
2812 memset(buf
, 0xff, sizeof(buf
));
2814 for (offset
= 0; offset
+ sizeof(buf
) < size
; offset
+= sizeof(buf
)) {
2815 if (fwrite(buf
, sizeof(buf
), 1, output_file
) != 1)
2816 error(1, errno
, "Can not write 0xff to output_file");
2819 /* write last chunk smaller than buffer */
2820 if (offset
< size
) {
2821 offset
= size
- offset
;
2822 if (fwrite(buf
, offset
, 1, output_file
) != 1)
2823 error(1, errno
, "Can not write partition to output_file");
2827 static void convert_firmware(const char *input
, const char *output
)
2829 struct flash_partition_entry fwup
[MAX_PARTITIONS
] = { 0 };
2830 struct flash_partition_entry flash
[MAX_PARTITIONS
] = { 0 };
2831 struct flash_partition_entry
*fwup_os_image
= NULL
, *fwup_file_system
= NULL
;
2832 struct flash_partition_entry
*flash_os_image
= NULL
, *flash_file_system
= NULL
;
2833 struct flash_partition_entry
*fwup_partition_table
= NULL
;
2834 size_t firmware_offset
= 0x1014;
2835 FILE *input_file
, *output_file
;
2837 struct stat statbuf
;
2839 /* check input file */
2840 if (stat(input
, &statbuf
)) {
2841 error(1, errno
, "Can not read input firmware %s", input
);
2844 input_file
= fopen(input
, "rb");
2846 error(1, 0, "Can not open input firmware %s", input
);
2848 output_file
= fopen(output
, "wb");
2850 error(1, 0, "Can not open output firmware %s", output
);
2852 if (read_partition_table(input_file
, firmware_offset
, fwup
, MAX_PARTITIONS
, 0) != 0) {
2853 error(1, 0, "Error can not read the partition table (fwup-ptn)");
2856 fwup_os_image
= find_partition(fwup
, MAX_PARTITIONS
,
2857 "os-image", "Error can not find os-image partition (fwup)");
2858 fwup_file_system
= find_partition(fwup
, MAX_PARTITIONS
,
2859 "file-system", "Error can not find file-system partition (fwup)");
2860 fwup_partition_table
= find_partition(fwup
, MAX_PARTITIONS
,
2861 "partition-table", "Error can not find partition-table partition");
2863 /* the flash partition table has a 0x00000004 magic haeder */
2864 if (read_partition_table(input_file
, firmware_offset
+ fwup_partition_table
->base
+ 4, flash
, MAX_PARTITIONS
, 1) != 0)
2865 error(1, 0, "Error can not read the partition table (flash)");
2867 flash_os_image
= find_partition(flash
, MAX_PARTITIONS
,
2868 "os-image", "Error can not find os-image partition (flash)");
2869 flash_file_system
= find_partition(flash
, MAX_PARTITIONS
,
2870 "file-system", "Error can not find file-system partition (flash)");
2872 /* write os_image to 0x0 */
2873 write_partition(input_file
, firmware_offset
, fwup_os_image
, output_file
);
2874 write_ff(output_file
, flash_os_image
->size
- fwup_os_image
->size
);
2876 /* write file-system behind os_image */
2877 fseek(output_file
, flash_file_system
->base
- flash_os_image
->base
, SEEK_SET
);
2878 write_partition(input_file
, firmware_offset
, fwup_file_system
, output_file
);
2879 write_ff(output_file
, flash_file_system
->size
- fwup_file_system
->size
);
2881 fclose(output_file
);
2885 int main(int argc
, char *argv
[]) {
2886 const char *board
= NULL
, *kernel_image
= NULL
, *rootfs_image
= NULL
, *output
= NULL
;
2887 const char *extract_image
= NULL
, *output_directory
= NULL
, *convert_image
= NULL
;
2888 bool add_jffs2_eof
= false, sysupgrade
= false;
2890 struct device_info
*info
;
2891 set_source_date_epoch();
2896 c
= getopt(argc
, argv
, "B:k:r:o:V:jSh:x:d:z:");
2906 kernel_image
= optarg
;
2910 rootfs_image
= optarg
;
2918 sscanf(optarg
, "r%u", &rev
);
2922 add_jffs2_eof
= true;
2934 output_directory
= optarg
;
2938 extract_image
= optarg
;
2942 convert_image
= optarg
;
2951 if (extract_image
|| output_directory
) {
2953 error(1, 0, "No factory/oem image given via -x <file>. Output directory is only valid with -x");
2954 if (!output_directory
)
2955 error(1, 0, "Can not extract an image without output directory. Use -d <dir>");
2956 extract_firmware(extract_image
, output_directory
);
2957 } else if (convert_image
) {
2959 error(1, 0, "Can not convert a factory/oem image into sysupgrade image without output file. Use -o <file>");
2960 convert_firmware(convert_image
, output
);
2963 error(1, 0, "no board has been specified");
2965 error(1, 0, "no kernel image has been specified");
2967 error(1, 0, "no rootfs image has been specified");
2969 error(1, 0, "no output filename has been specified");
2971 info
= find_board(board
);
2974 error(1, 0, "unsupported board %s", board
);
2976 build_image(output
, kernel_image
, rootfs_image
, rev
, add_jffs2_eof
, sysupgrade
, info
);