2 Copyright (c) 2014, Matthias Schiffer <mschiffer@universe-factory.net>
5 Redistribution and use in source and binary forms, with or without
6 modification, are permitted provided that the following conditions are met:
8 1. Redistributions of source code must retain the above copyright notice,
9 this list of conditions and the following disclaimer.
10 2. Redistributions in binary form must reproduce the above copyright notice,
11 this list of conditions and the following disclaimer in the documentation
12 and/or other materials provided with the distribution.
14 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
15 AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16 IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
17 DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
18 FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19 DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
20 SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
21 CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
22 OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
23 OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
30 Image generation tool for the TP-LINK SafeLoader as seen on
31 TP-LINK Pharos devices (CPE210/220/510/520)
45 #include <arpa/inet.h>
47 #include <sys/types.h>
54 #define ALIGN(x,a) ({ typeof(a) __a = (a); (((x) + __a - 1) & ~(__a - 1)); })
57 #define MAX_PARTITIONS 32
59 /** An image partition table entry */
60 struct image_partition_entry
{
66 /** A flash partition table entry */
67 struct flash_partition_entry
{
73 /** Firmware layout description */
77 const char *support_list
;
80 uint32_t soft_ver_compat_level
;
81 struct flash_partition_entry partitions
[MAX_PARTITIONS
+1];
82 const char *first_sysupgrade_partition
;
83 const char *last_sysupgrade_partition
;
86 /** The content of the soft-version structure */
87 struct __attribute__((__packed__
)) soft_version
{
91 uint8_t version_major
;
92 uint8_t version_minor
;
93 uint8_t version_patch
;
102 static const uint8_t jffs2_eof_mark
[4] = {0xde, 0xad, 0xc0, 0xde};
106 Salt for the MD5 hash
108 Fortunately, TP-LINK seems to use the same salt for most devices which use
109 the new image format.
111 static const uint8_t md5_salt
[16] = {
112 0x7a, 0x2b, 0x15, 0xed,
113 0x9b, 0x98, 0x59, 0x6d,
114 0xe5, 0x04, 0xab, 0x44,
115 0xac, 0x2a, 0x9f, 0x4e,
119 /** Firmware layout table */
120 static struct device_info boards
[] = {
121 /** Firmware layout for the CPE210/220 V1 */
124 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
127 "CPE210(TP-LINK|UN|N300-2):1.0\r\n"
128 "CPE210(TP-LINK|UN|N300-2):1.1\r\n"
129 "CPE210(TP-LINK|US|N300-2):1.1\r\n"
130 "CPE210(TP-LINK|EU|N300-2):1.1\r\n"
131 "CPE220(TP-LINK|UN|N300-2):1.1\r\n"
132 "CPE220(TP-LINK|US|N300-2):1.1\r\n"
133 "CPE220(TP-LINK|EU|N300-2):1.1\r\n",
134 .support_trail
= '\xff',
138 {"fs-uboot", 0x00000, 0x20000},
139 {"partition-table", 0x20000, 0x02000},
140 {"default-mac", 0x30000, 0x00020},
141 {"product-info", 0x31100, 0x00100},
142 {"signature", 0x32000, 0x00400},
143 {"os-image", 0x40000, 0x300000},
144 {"file-system", 0x340000, 0x470000},
145 {"soft-version", 0x7b0000, 0x00100},
146 {"support-list", 0x7b1000, 0x00400},
147 {"user-config", 0x7c0000, 0x10000},
148 {"default-config", 0x7d0000, 0x10000},
149 {"log", 0x7e0000, 0x10000},
150 {"radio", 0x7f0000, 0x10000},
154 .first_sysupgrade_partition
= "os-image",
155 .last_sysupgrade_partition
= "support-list",
158 /** Firmware layout for the CPE210 V2 */
161 .vendor
= "CPE210(TP-LINK|UN|N300-2|00000000):2.0\r\n",
164 "CPE210(TP-LINK|EU|N300-2|00000000):2.0\r\n"
165 "CPE210(TP-LINK|EU|N300-2|45550000):2.0\r\n"
166 "CPE210(TP-LINK|EU|N300-2|55530000):2.0\r\n"
167 "CPE210(TP-LINK|UN|N300-2|00000000):2.0\r\n"
168 "CPE210(TP-LINK|UN|N300-2|45550000):2.0\r\n"
169 "CPE210(TP-LINK|UN|N300-2|55530000):2.0\r\n"
170 "CPE210(TP-LINK|US|N300-2|55530000):2.0\r\n"
171 "CPE210(TP-LINK|UN|N300-2):2.0\r\n"
172 "CPE210(TP-LINK|EU|N300-2):2.0\r\n"
173 "CPE210(TP-LINK|US|N300-2):2.0\r\n",
174 .support_trail
= '\xff',
178 {"fs-uboot", 0x00000, 0x20000},
179 {"partition-table", 0x20000, 0x02000},
180 {"default-mac", 0x30000, 0x00020},
181 {"product-info", 0x31100, 0x00100},
182 {"device-info", 0x31400, 0x00400},
183 {"signature", 0x32000, 0x00400},
184 {"device-id", 0x33000, 0x00100},
185 {"firmware", 0x40000, 0x770000},
186 {"soft-version", 0x7b0000, 0x00100},
187 {"support-list", 0x7b1000, 0x01000},
188 {"user-config", 0x7c0000, 0x10000},
189 {"default-config", 0x7d0000, 0x10000},
190 {"log", 0x7e0000, 0x10000},
191 {"radio", 0x7f0000, 0x10000},
195 .first_sysupgrade_partition
= "os-image",
196 .last_sysupgrade_partition
= "support-list",
199 /** Firmware layout for the CPE210 V3 */
202 .vendor
= "CPE210(TP-LINK|UN|N300-2|00000000):3.0\r\n",
205 "CPE210(TP-LINK|EU|N300-2|45550000):3.0\r\n"
206 "CPE210(TP-LINK|UN|N300-2|00000000):3.0\r\n"
207 "CPE210(TP-LINK|US|N300-2|55530000):3.0\r\n"
208 "CPE210(TP-LINK|UN|N300-2):3.0\r\n"
209 "CPE210(TP-LINK|EU|N300-2):3.0\r\n"
210 "CPE210(TP-LINK|EU|N300-2|45550000):3.1\r\n"
211 "CPE210(TP-LINK|UN|N300-2|00000000):3.1\r\n"
212 "CPE210(TP-LINK|US|N300-2|55530000):3.1\r\n"
213 "CPE210(TP-LINK|EU|N300-2|45550000):3.20\r\n"
214 "CPE210(TP-LINK|UN|N300-2|00000000):3.20\r\n"
215 "CPE210(TP-LINK|US|N300-2|55530000):3.20\r\n",
216 .support_trail
= '\xff',
220 {"fs-uboot", 0x00000, 0x20000},
221 {"partition-table", 0x20000, 0x01000},
222 {"default-mac", 0x30000, 0x00020},
223 {"product-info", 0x31100, 0x00100},
224 {"device-info", 0x31400, 0x00400},
225 {"signature", 0x32000, 0x00400},
226 {"device-id", 0x33000, 0x00100},
227 {"firmware", 0x40000, 0x770000},
228 {"soft-version", 0x7b0000, 0x00100},
229 {"support-list", 0x7b1000, 0x01000},
230 {"user-config", 0x7c0000, 0x10000},
231 {"default-config", 0x7d0000, 0x10000},
232 {"log", 0x7e0000, 0x10000},
233 {"radio", 0x7f0000, 0x10000},
237 .first_sysupgrade_partition
= "os-image",
238 .last_sysupgrade_partition
= "support-list",
241 /** Firmware layout for the CPE220 V2 */
244 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
247 "CPE220(TP-LINK|EU|N300-2|00000000):2.0\r\n"
248 "CPE220(TP-LINK|EU|N300-2|45550000):2.0\r\n"
249 "CPE220(TP-LINK|EU|N300-2|55530000):2.0\r\n"
250 "CPE220(TP-LINK|UN|N300-2|00000000):2.0\r\n"
251 "CPE220(TP-LINK|UN|N300-2|45550000):2.0\r\n"
252 "CPE220(TP-LINK|UN|N300-2|55530000):2.0\r\n"
253 "CPE220(TP-LINK|US|N300-2|55530000):2.0\r\n"
254 "CPE220(TP-LINK|UN|N300-2):2.0\r\n"
255 "CPE220(TP-LINK|EU|N300-2):2.0\r\n"
256 "CPE220(TP-LINK|US|N300-2):2.0\r\n",
257 .support_trail
= '\xff',
261 {"fs-uboot", 0x00000, 0x20000},
262 {"partition-table", 0x20000, 0x02000},
263 {"default-mac", 0x30000, 0x00020},
264 {"product-info", 0x31100, 0x00100},
265 {"signature", 0x32000, 0x00400},
266 {"os-image", 0x40000, 0x300000},
267 {"file-system", 0x340000, 0x470000},
268 {"soft-version", 0x7b0000, 0x00100},
269 {"support-list", 0x7b1000, 0x00400},
270 {"user-config", 0x7c0000, 0x10000},
271 {"default-config", 0x7d0000, 0x10000},
272 {"log", 0x7e0000, 0x10000},
273 {"radio", 0x7f0000, 0x10000},
277 .first_sysupgrade_partition
= "os-image",
278 .last_sysupgrade_partition
= "support-list",
281 /** Firmware layout for the CPE220 V3 */
284 .vendor
= "CPE220(TP-LINK|UN|N300-2|00000000):3.0\r\n",
287 "CPE220(TP-LINK|EU|N300-2|00000000):3.0\r\n"
288 "CPE220(TP-LINK|EU|N300-2|45550000):3.0\r\n"
289 "CPE220(TP-LINK|EU|N300-2|55530000):3.0\r\n"
290 "CPE220(TP-LINK|UN|N300-2|00000000):3.0\r\n"
291 "CPE220(TP-LINK|UN|N300-2|45550000):3.0\r\n"
292 "CPE220(TP-LINK|UN|N300-2|55530000):3.0\r\n"
293 "CPE220(TP-LINK|US|N300-2|55530000):3.0\r\n"
294 "CPE220(TP-LINK|UN|N300-2):3.0\r\n"
295 "CPE220(TP-LINK|EU|N300-2):3.0\r\n"
296 "CPE220(TP-LINK|US|N300-2):3.0\r\n",
297 .support_trail
= '\xff',
301 {"fs-uboot", 0x00000, 0x20000},
302 {"partition-table", 0x20000, 0x02000},
303 {"default-mac", 0x30000, 0x00020},
304 {"product-info", 0x31100, 0x00100},
305 {"device-info", 0x31400, 0x00400},
306 {"signature", 0x32000, 0x00400},
307 {"device-id", 0x33000, 0x00100},
308 {"firmware", 0x40000, 0x770000},
309 {"soft-version", 0x7b0000, 0x00100},
310 {"support-list", 0x7b1000, 0x01000},
311 {"user-config", 0x7c0000, 0x10000},
312 {"default-config", 0x7d0000, 0x10000},
313 {"log", 0x7e0000, 0x10000},
314 {"radio", 0x7f0000, 0x10000},
318 .first_sysupgrade_partition
= "os-image",
319 .last_sysupgrade_partition
= "support-list",
322 /** Firmware layout for the CPE510/520 V1 */
325 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
328 "CPE510(TP-LINK|UN|N300-5):1.0\r\n"
329 "CPE510(TP-LINK|UN|N300-5):1.1\r\n"
330 "CPE510(TP-LINK|UN|N300-5):1.1\r\n"
331 "CPE510(TP-LINK|US|N300-5):1.1\r\n"
332 "CPE510(TP-LINK|EU|N300-5):1.1\r\n"
333 "CPE520(TP-LINK|UN|N300-5):1.1\r\n"
334 "CPE520(TP-LINK|US|N300-5):1.1\r\n"
335 "CPE520(TP-LINK|EU|N300-5):1.1\r\n",
336 .support_trail
= '\xff',
340 {"fs-uboot", 0x00000, 0x20000},
341 {"partition-table", 0x20000, 0x02000},
342 {"default-mac", 0x30000, 0x00020},
343 {"product-info", 0x31100, 0x00100},
344 {"signature", 0x32000, 0x00400},
345 {"os-image", 0x40000, 0x300000},
346 {"file-system", 0x340000, 0x470000},
347 {"soft-version", 0x7b0000, 0x00100},
348 {"support-list", 0x7b1000, 0x00400},
349 {"user-config", 0x7c0000, 0x10000},
350 {"default-config", 0x7d0000, 0x10000},
351 {"log", 0x7e0000, 0x10000},
352 {"radio", 0x7f0000, 0x10000},
356 .first_sysupgrade_partition
= "os-image",
357 .last_sysupgrade_partition
= "support-list",
360 /** Firmware layout for the CPE510 V2 */
363 .vendor
= "CPE510(TP-LINK|UN|N300-5):2.0\r\n",
366 "CPE510(TP-LINK|EU|N300-5|00000000):2.0\r\n"
367 "CPE510(TP-LINK|EU|N300-5|45550000):2.0\r\n"
368 "CPE510(TP-LINK|EU|N300-5|55530000):2.0\r\n"
369 "CPE510(TP-LINK|UN|N300-5|00000000):2.0\r\n"
370 "CPE510(TP-LINK|UN|N300-5|45550000):2.0\r\n"
371 "CPE510(TP-LINK|UN|N300-5|55530000):2.0\r\n"
372 "CPE510(TP-LINK|US|N300-5|00000000):2.0\r\n"
373 "CPE510(TP-LINK|US|N300-5|45550000):2.0\r\n"
374 "CPE510(TP-LINK|US|N300-5|55530000):2.0\r\n"
375 "CPE510(TP-LINK|UN|N300-5):2.0\r\n"
376 "CPE510(TP-LINK|EU|N300-5):2.0\r\n"
377 "CPE510(TP-LINK|US|N300-5):2.0\r\n",
378 .support_trail
= '\xff',
382 {"fs-uboot", 0x00000, 0x20000},
383 {"partition-table", 0x20000, 0x02000},
384 {"default-mac", 0x30000, 0x00020},
385 {"product-info", 0x31100, 0x00100},
386 {"signature", 0x32000, 0x00400},
387 {"os-image", 0x40000, 0x300000},
388 {"file-system", 0x340000, 0x470000},
389 {"soft-version", 0x7b0000, 0x00100},
390 {"support-list", 0x7b1000, 0x00400},
391 {"user-config", 0x7c0000, 0x10000},
392 {"default-config", 0x7d0000, 0x10000},
393 {"log", 0x7e0000, 0x10000},
394 {"radio", 0x7f0000, 0x10000},
398 .first_sysupgrade_partition
= "os-image",
399 .last_sysupgrade_partition
= "support-list",
402 /** Firmware layout for the CPE510 V3 */
405 .vendor
= "CPE510(TP-LINK|UN|N300-5):3.0\r\n",
408 "CPE510(TP-LINK|EU|N300-5|00000000):3.0\r\n"
409 "CPE510(TP-LINK|EU|N300-5|45550000):3.0\r\n"
410 "CPE510(TP-LINK|EU|N300-5|55530000):3.0\r\n"
411 "CPE510(TP-LINK|UN|N300-5|00000000):3.0\r\n"
412 "CPE510(TP-LINK|UN|N300-5|45550000):3.0\r\n"
413 "CPE510(TP-LINK|UN|N300-5|55530000):3.0\r\n"
414 "CPE510(TP-LINK|US|N300-5|00000000):3.0\r\n"
415 "CPE510(TP-LINK|US|N300-5|45550000):3.0\r\n"
416 "CPE510(TP-LINK|US|N300-5|55530000):3.0\r\n"
417 "CPE510(TP-LINK|UN|N300-5):3.0\r\n"
418 "CPE510(TP-LINK|EU|N300-5):3.0\r\n"
419 "CPE510(TP-LINK|US|N300-5):3.0\r\n",
420 .support_trail
= '\xff',
424 {"fs-uboot", 0x00000, 0x20000},
425 {"partition-table", 0x20000, 0x02000},
426 {"default-mac", 0x30000, 0x00020},
427 {"product-info", 0x31100, 0x00100},
428 {"signature", 0x32000, 0x00400},
429 {"os-image", 0x40000, 0x300000},
430 {"file-system", 0x340000, 0x470000},
431 {"soft-version", 0x7b0000, 0x00100},
432 {"support-list", 0x7b1000, 0x00400},
433 {"user-config", 0x7c0000, 0x10000},
434 {"default-config", 0x7d0000, 0x10000},
435 {"log", 0x7e0000, 0x10000},
436 {"radio", 0x7f0000, 0x10000},
440 .first_sysupgrade_partition
= "os-image",
441 .last_sysupgrade_partition
= "support-list",
444 /** Firmware layout for the CPE610V1 */
447 .vendor
= "CPE610(TP-LINK|UN|N300-5|00000000):1.0\r\n",
450 "CPE610(TP-LINK|EU|N300-5|00000000):1.0\r\n"
451 "CPE610(TP-LINK|EU|N300-5|45550000):1.0\r\n"
452 "CPE610(TP-LINK|EU|N300-5|55530000):1.0\r\n"
453 "CPE610(TP-LINK|UN|N300-5|00000000):1.0\r\n"
454 "CPE610(TP-LINK|UN|N300-5|45550000):1.0\r\n"
455 "CPE610(TP-LINK|UN|N300-5|55530000):1.0\r\n"
456 "CPE610(TP-LINK|US|N300-5|55530000):1.0\r\n"
457 "CPE610(TP-LINK|UN|N300-5):1.0\r\n"
458 "CPE610(TP-LINK|EU|N300-5):1.0\r\n"
459 "CPE610(TP-LINK|US|N300-5):1.0\r\n",
460 .support_trail
= '\xff',
464 {"fs-uboot", 0x00000, 0x20000},
465 {"partition-table", 0x20000, 0x02000},
466 {"default-mac", 0x30000, 0x00020},
467 {"product-info", 0x31100, 0x00100},
468 {"signature", 0x32000, 0x00400},
469 {"os-image", 0x40000, 0x300000},
470 {"file-system", 0x340000, 0x470000},
471 {"soft-version", 0x7b0000, 0x00100},
472 {"support-list", 0x7b1000, 0x00400},
473 {"user-config", 0x7c0000, 0x10000},
474 {"default-config", 0x7d0000, 0x10000},
475 {"log", 0x7e0000, 0x10000},
476 {"radio", 0x7f0000, 0x10000},
480 .first_sysupgrade_partition
= "os-image",
481 .last_sysupgrade_partition
= "support-list",
484 /** Firmware layout for the CPE610V2 */
487 .vendor
= "CPE610(TP-LINK|UN|N300-5|00000000):2.0\r\n",
490 "CPE610(TP-LINK|EU|N300-5|00000000):2.0\r\n"
491 "CPE610(TP-LINK|EU|N300-5|45550000):2.0\r\n"
492 "CPE610(TP-LINK|EU|N300-5|55530000):2.0\r\n"
493 "CPE610(TP-LINK|UN|N300-5|00000000):2.0\r\n"
494 "CPE610(TP-LINK|UN|N300-5|45550000):2.0\r\n"
495 "CPE610(TP-LINK|UN|N300-5|55530000):2.0\r\n"
496 "CPE610(TP-LINK|US|N300-5|55530000):2.0\r\n"
497 "CPE610(TP-LINK|UN|N300-5):2.0\r\n"
498 "CPE610(TP-LINK|EU|N300-5):2.0\r\n"
499 "CPE610(TP-LINK|US|N300-5):2.0\r\n",
500 .support_trail
= '\xff',
504 {"fs-uboot", 0x00000, 0x20000},
505 {"partition-table", 0x20000, 0x02000},
506 {"default-mac", 0x30000, 0x00020},
507 {"product-info", 0x31100, 0x00100},
508 {"signature", 0x32000, 0x00400},
509 {"os-image", 0x40000, 0x300000},
510 {"file-system", 0x340000, 0x470000},
511 {"soft-version", 0x7b0000, 0x00100},
512 {"support-list", 0x7b1000, 0x00400},
513 {"user-config", 0x7c0000, 0x10000},
514 {"default-config", 0x7d0000, 0x10000},
515 {"log", 0x7e0000, 0x10000},
516 {"radio", 0x7f0000, 0x10000},
520 .first_sysupgrade_partition
= "os-image",
521 .last_sysupgrade_partition
= "support-list",
526 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
529 "WBS210(TP-LINK|UN|N300-2):1.20\r\n"
530 "WBS210(TP-LINK|US|N300-2):1.20\r\n"
531 "WBS210(TP-LINK|EU|N300-2):1.20\r\n",
532 .support_trail
= '\xff',
536 {"fs-uboot", 0x00000, 0x20000},
537 {"partition-table", 0x20000, 0x02000},
538 {"default-mac", 0x30000, 0x00020},
539 {"product-info", 0x31100, 0x00100},
540 {"signature", 0x32000, 0x00400},
541 {"os-image", 0x40000, 0x300000},
542 {"file-system", 0x340000, 0x470000},
543 {"soft-version", 0x7b0000, 0x00100},
544 {"support-list", 0x7b1000, 0x00400},
545 {"user-config", 0x7c0000, 0x10000},
546 {"default-config", 0x7d0000, 0x10000},
547 {"log", 0x7e0000, 0x10000},
548 {"radio", 0x7f0000, 0x10000},
552 .first_sysupgrade_partition
= "os-image",
553 .last_sysupgrade_partition
= "support-list",
558 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
561 "WBS210(TP-LINK|UN|N300-2|00000000):2.0\r\n"
562 "WBS210(TP-LINK|US|N300-2|55530000):2.0\r\n"
563 "WBS210(TP-LINK|EU|N300-2|45550000):2.0\r\n",
564 .support_trail
= '\xff',
568 {"fs-uboot", 0x00000, 0x20000},
569 {"partition-table", 0x20000, 0x02000},
570 {"default-mac", 0x30000, 0x00020},
571 {"product-info", 0x31100, 0x00100},
572 {"signature", 0x32000, 0x00400},
573 {"os-image", 0x40000, 0x300000},
574 {"file-system", 0x340000, 0x470000},
575 {"soft-version", 0x7b0000, 0x00100},
576 {"support-list", 0x7b1000, 0x00400},
577 {"user-config", 0x7c0000, 0x10000},
578 {"default-config", 0x7d0000, 0x10000},
579 {"log", 0x7e0000, 0x10000},
580 {"radio", 0x7f0000, 0x10000},
584 .first_sysupgrade_partition
= "os-image",
585 .last_sysupgrade_partition
= "support-list",
590 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
593 "WBS510(TP-LINK|UN|N300-5):1.20\r\n"
594 "WBS510(TP-LINK|US|N300-5):1.20\r\n"
595 "WBS510(TP-LINK|EU|N300-5):1.20\r\n"
596 "WBS510(TP-LINK|CA|N300-5):1.20\r\n",
597 .support_trail
= '\xff',
601 {"fs-uboot", 0x00000, 0x20000},
602 {"partition-table", 0x20000, 0x02000},
603 {"default-mac", 0x30000, 0x00020},
604 {"product-info", 0x31100, 0x00100},
605 {"signature", 0x32000, 0x00400},
606 {"os-image", 0x40000, 0x300000},
607 {"file-system", 0x340000, 0x470000},
608 {"soft-version", 0x7b0000, 0x00100},
609 {"support-list", 0x7b1000, 0x00400},
610 {"user-config", 0x7c0000, 0x10000},
611 {"default-config", 0x7d0000, 0x10000},
612 {"log", 0x7e0000, 0x10000},
613 {"radio", 0x7f0000, 0x10000},
617 .first_sysupgrade_partition
= "os-image",
618 .last_sysupgrade_partition
= "support-list",
623 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
626 "WBS510(TP-LINK|UN|N300-5|00000000):2.0\r\n"
627 "WBS510(TP-LINK|US|N300-5|55530000):2.0\r\n"
628 "WBS510(TP-LINK|EU|N300-5|45550000):2.0\r\n"
629 "WBS510(TP-LINK|CA|N300-5|43410000):2.0\r\n",
630 .support_trail
= '\xff',
634 {"fs-uboot", 0x00000, 0x20000},
635 {"partition-table", 0x20000, 0x02000},
636 {"default-mac", 0x30000, 0x00020},
637 {"product-info", 0x31100, 0x00100},
638 {"signature", 0x32000, 0x00400},
639 {"os-image", 0x40000, 0x300000},
640 {"file-system", 0x340000, 0x470000},
641 {"soft-version", 0x7b0000, 0x00100},
642 {"support-list", 0x7b1000, 0x00400},
643 {"user-config", 0x7c0000, 0x10000},
644 {"default-config", 0x7d0000, 0x10000},
645 {"log", 0x7e0000, 0x10000},
646 {"radio", 0x7f0000, 0x10000},
650 .first_sysupgrade_partition
= "os-image",
651 .last_sysupgrade_partition
= "support-list",
654 /** Firmware layout for the C2600 */
660 "{product_name:Archer C2600,product_ver:1.0.0,special_id:00000000}\r\n",
661 .support_trail
= '\x00',
665 We use a bigger os-image partition than the stock images (and thus
666 smaller file-system), as our kernel doesn't fit in the stock firmware's
667 2 MB os-image since kernel 4.14.
670 {"SBL1", 0x00000, 0x20000},
671 {"MIBIB", 0x20000, 0x20000},
672 {"SBL2", 0x40000, 0x20000},
673 {"SBL3", 0x60000, 0x30000},
674 {"DDRCONFIG", 0x90000, 0x10000},
675 {"SSD", 0xa0000, 0x10000},
676 {"TZ", 0xb0000, 0x30000},
677 {"RPM", 0xe0000, 0x20000},
678 {"fs-uboot", 0x100000, 0x70000},
679 {"uboot-env", 0x170000, 0x40000},
680 {"radio", 0x1b0000, 0x40000},
681 {"os-image", 0x1f0000, 0x400000}, /* Stock: base 0x1f0000 size 0x200000 */
682 {"file-system", 0x5f0000, 0x1900000}, /* Stock: base 0x3f0000 size 0x1b00000 */
683 {"default-mac", 0x1ef0000, 0x00200},
684 {"pin", 0x1ef0200, 0x00200},
685 {"product-info", 0x1ef0400, 0x0fc00},
686 {"partition-table", 0x1f00000, 0x10000},
687 {"soft-version", 0x1f10000, 0x10000},
688 {"support-list", 0x1f20000, 0x10000},
689 {"profile", 0x1f30000, 0x10000},
690 {"default-config", 0x1f40000, 0x10000},
691 {"user-config", 0x1f50000, 0x40000},
692 {"qos-db", 0x1f90000, 0x40000},
693 {"usb-config", 0x1fd0000, 0x10000},
694 {"log", 0x1fe0000, 0x20000},
698 .first_sysupgrade_partition
= "os-image",
699 .last_sysupgrade_partition
= "file-system"
702 /** Firmware layout for the A7-V5 */
704 .id
= "ARCHER-A7-V5",
707 "{product_name:Archer A7,product_ver:5.0.0,special_id:45550000}\n"
708 "{product_name:Archer A7,product_ver:5.0.0,special_id:55530000}\n"
709 "{product_name:Archer A7,product_ver:5.0.0,special_id:43410000}\n"
710 "{product_name:Archer A7,product_ver:5.0.0,special_id:4A500000}\n"
711 "{product_name:Archer A7,product_ver:5.0.0,special_id:54570000}\n",
712 .support_trail
= '\x00',
713 .soft_ver
= "soft_ver:1.0.0\n",
715 /* We're using a dynamic kernel/rootfs split here */
717 {"factory-boot", 0x00000, 0x20000},
718 {"fs-uboot", 0x20000, 0x20000},
719 {"firmware", 0x40000, 0xec0000}, /* Stock: name os-image base 0x40000 size 0x120000 */
720 /* Stock: name file-system base 0x160000 size 0xda0000 */
721 {"default-mac", 0xf40000, 0x00200},
722 {"pin", 0xf40200, 0x00200},
723 {"device-id", 0xf40400, 0x00100},
724 {"product-info", 0xf40500, 0x0fb00},
725 {"soft-version", 0xf50000, 0x00100},
726 {"extra-para", 0xf51000, 0x01000},
727 {"support-list", 0xf52000, 0x0a000},
728 {"profile", 0xf5c000, 0x04000},
729 {"default-config", 0xf60000, 0x10000},
730 {"user-config", 0xf70000, 0x40000},
731 {"certificate", 0xfb0000, 0x10000},
732 {"partition-table", 0xfc0000, 0x10000},
733 {"log", 0xfd0000, 0x20000},
734 {"radio", 0xff0000, 0x10000},
738 .first_sysupgrade_partition
= "os-image",
739 .last_sysupgrade_partition
= "file-system",
742 /** Firmware layout for the C2v3 */
744 .id
= "ARCHER-C2-V3",
747 "{product_name:ArcherC2,product_ver:3.0.0,special_id:00000000}\n"
748 "{product_name:ArcherC2,product_ver:3.0.0,special_id:55530000}\n"
749 "{product_name:ArcherC2,product_ver:3.0.0,special_id:45550000}\n",
750 .support_trail
= '\x00',
751 .soft_ver
= "soft_ver:3.0.1\n",
753 /** We're using a dynamic kernel/rootfs split here */
756 {"factory-boot", 0x00000, 0x20000},
757 {"fs-uboot", 0x20000, 0x10000},
758 {"firmware", 0x30000, 0x7a0000},
759 {"user-config", 0x7d0000, 0x04000},
760 {"default-mac", 0x7e0000, 0x00100},
761 {"device-id", 0x7e0100, 0x00100},
762 {"extra-para", 0x7e0200, 0x00100},
763 {"pin", 0x7e0300, 0x00100},
764 {"support-list", 0x7e0400, 0x00400},
765 {"soft-version", 0x7e0800, 0x00400},
766 {"product-info", 0x7e0c00, 0x01400},
767 {"partition-table", 0x7e2000, 0x01000},
768 {"profile", 0x7e3000, 0x01000},
769 {"default-config", 0x7e4000, 0x04000},
770 {"merge-config", 0x7ec000, 0x02000},
771 {"qos-db", 0x7ee000, 0x02000},
772 {"radio", 0x7f0000, 0x10000},
776 .first_sysupgrade_partition
= "os-image",
777 .last_sysupgrade_partition
= "file-system",
780 /** Firmware layout for the C25v1 */
782 .id
= "ARCHER-C25-V1",
785 "{product_name:ArcherC25,product_ver:1.0.0,special_id:00000000}\n"
786 "{product_name:ArcherC25,product_ver:1.0.0,special_id:55530000}\n"
787 "{product_name:ArcherC25,product_ver:1.0.0,special_id:45550000}\n",
788 .support_trail
= '\x00',
789 .soft_ver
= "soft_ver:1.0.0\n",
791 /* We're using a dynamic kernel/rootfs split here */
793 {"factory-boot", 0x00000, 0x20000},
794 {"fs-uboot", 0x20000, 0x10000},
795 {"firmware", 0x30000, 0x7a0000}, /* Stock: name os-image base 0x30000 size 0x100000 */
796 /* Stock: name file-system base 0x130000 size 0x6a0000 */
797 {"user-config", 0x7d0000, 0x04000},
798 {"default-mac", 0x7e0000, 0x00100},
799 {"device-id", 0x7e0100, 0x00100},
800 {"extra-para", 0x7e0200, 0x00100},
801 {"pin", 0x7e0300, 0x00100},
802 {"support-list", 0x7e0400, 0x00400},
803 {"soft-version", 0x7e0800, 0x00400},
804 {"product-info", 0x7e0c00, 0x01400},
805 {"partition-table", 0x7e2000, 0x01000},
806 {"profile", 0x7e3000, 0x01000},
807 {"default-config", 0x7e4000, 0x04000},
808 {"merge-config", 0x7ec000, 0x02000},
809 {"qos-db", 0x7ee000, 0x02000},
810 {"radio", 0x7f0000, 0x10000},
814 .first_sysupgrade_partition
= "os-image",
815 .last_sysupgrade_partition
= "file-system",
818 /** Firmware layout for the C58v1 */
820 .id
= "ARCHER-C58-V1",
824 "{product_name:Archer C58,product_ver:1.0.0,special_id:00000000}\r\n"
825 "{product_name:Archer C58,product_ver:1.0.0,special_id:45550000}\r\n"
826 "{product_name:Archer C58,product_ver:1.0.0,special_id:55530000}\r\n",
827 .support_trail
= '\x00',
828 .soft_ver
= "soft_ver:1.0.0\n",
831 {"fs-uboot", 0x00000, 0x10000},
832 {"default-mac", 0x10000, 0x00200},
833 {"pin", 0x10200, 0x00200},
834 {"product-info", 0x10400, 0x00100},
835 {"partition-table", 0x10500, 0x00800},
836 {"soft-version", 0x11300, 0x00200},
837 {"support-list", 0x11500, 0x00100},
838 {"device-id", 0x11600, 0x00100},
839 {"profile", 0x11700, 0x03900},
840 {"default-config", 0x15000, 0x04000},
841 {"user-config", 0x19000, 0x04000},
842 {"firmware", 0x20000, 0x7c8000},
843 {"certyficate", 0x7e8000, 0x08000},
844 {"radio", 0x7f0000, 0x10000},
848 .first_sysupgrade_partition
= "os-image",
849 .last_sysupgrade_partition
= "file-system",
852 /** Firmware layout for the C59v1 */
854 .id
= "ARCHER-C59-V1",
858 "{product_name:Archer C59,product_ver:1.0.0,special_id:00000000}\r\n"
859 "{product_name:Archer C59,product_ver:1.0.0,special_id:45550000}\r\n"
860 "{product_name:Archer C59,product_ver:1.0.0,special_id:52550000}\r\n"
861 "{product_name:Archer C59,product_ver:1.0.0,special_id:55530000}\r\n",
862 .support_trail
= '\x00',
863 .soft_ver
= "soft_ver:1.0.0\n",
865 /* We're using a dynamic kernel/rootfs split here */
867 {"fs-uboot", 0x00000, 0x10000},
868 {"default-mac", 0x10000, 0x00200},
869 {"pin", 0x10200, 0x00200},
870 {"device-id", 0x10400, 0x00100},
871 {"product-info", 0x10500, 0x0fb00},
872 {"firmware", 0x20000, 0xe30000},
873 {"partition-table", 0xe50000, 0x10000},
874 {"soft-version", 0xe60000, 0x10000},
875 {"support-list", 0xe70000, 0x10000},
876 {"profile", 0xe80000, 0x10000},
877 {"default-config", 0xe90000, 0x10000},
878 {"user-config", 0xea0000, 0x40000},
879 {"usb-config", 0xee0000, 0x10000},
880 {"certificate", 0xef0000, 0x10000},
881 {"qos-db", 0xf00000, 0x40000},
882 {"log", 0xfe0000, 0x10000},
883 {"radio", 0xff0000, 0x10000},
887 .first_sysupgrade_partition
= "os-image",
888 .last_sysupgrade_partition
= "file-system",
891 /** Firmware layout for the C59v2 */
893 .id
= "ARCHER-C59-V2",
897 "{product_name:Archer C59,product_ver:2.0.0,special_id:00000000}\r\n"
898 "{product_name:Archer C59,product_ver:2.0.0,special_id:45550000}\r\n"
899 "{product_name:Archer C59,product_ver:2.0.0,special_id:55530000}\r\n",
900 .support_trail
= '\x00',
901 .soft_ver
= "soft_ver:2.0.0 Build 20161206 rel.7303\n",
903 /** We're using a dynamic kernel/rootfs split here */
905 {"factory-boot", 0x00000, 0x20000},
906 {"fs-uboot", 0x20000, 0x10000},
907 {"default-mac", 0x30000, 0x00200},
908 {"pin", 0x30200, 0x00200},
909 {"device-id", 0x30400, 0x00100},
910 {"product-info", 0x30500, 0x0fb00},
911 {"firmware", 0x40000, 0xe10000},
912 {"partition-table", 0xe50000, 0x10000},
913 {"soft-version", 0xe60000, 0x10000},
914 {"support-list", 0xe70000, 0x10000},
915 {"profile", 0xe80000, 0x10000},
916 {"default-config", 0xe90000, 0x10000},
917 {"user-config", 0xea0000, 0x40000},
918 {"usb-config", 0xee0000, 0x10000},
919 {"certificate", 0xef0000, 0x10000},
920 {"extra-para", 0xf00000, 0x10000},
921 {"qos-db", 0xf10000, 0x30000},
922 {"log", 0xfe0000, 0x10000},
923 {"radio", 0xff0000, 0x10000},
927 .first_sysupgrade_partition
= "os-image",
928 .last_sysupgrade_partition
= "file-system",
931 /** Firmware layout for the Archer C6 v2 (EU/RU/JP) */
933 .id
= "ARCHER-C6-V2",
937 "{product_name:Archer C6,product_ver:2.0.0,special_id:45550000}\r\n"
938 "{product_name:Archer C6,product_ver:2.0.0,special_id:52550000}\r\n"
939 "{product_name:Archer C6,product_ver:2.0.0,special_id:4A500000}\r\n",
940 .support_trail
= '\x00',
941 .soft_ver
= "soft_ver:1.9.1\n",
944 {"fs-uboot", 0x00000, 0x20000},
945 {"default-mac", 0x20000, 0x00200},
946 {"pin", 0x20200, 0x00100},
947 {"product-info", 0x20300, 0x00200},
948 {"device-id", 0x20500, 0x0fb00},
949 {"firmware", 0x30000, 0x7a9400},
950 {"soft-version", 0x7d9400, 0x00100},
951 {"extra-para", 0x7d9500, 0x00100},
952 {"support-list", 0x7d9600, 0x00200},
953 {"profile", 0x7d9800, 0x03000},
954 {"default-config", 0x7dc800, 0x03000},
955 {"partition-table", 0x7df800, 0x00800},
956 {"user-config", 0x7e0000, 0x0c000},
957 {"certificate", 0x7ec000, 0x04000},
958 {"radio", 0x7f0000, 0x10000},
962 .first_sysupgrade_partition
= "os-image",
963 .last_sysupgrade_partition
= "file-system",
966 /** Firmware layout for the Archer C6 v2 (US) and A6 v2 (US/TW) */
968 .id
= "ARCHER-C6-V2-US",
972 "{product_name:Archer A6,product_ver:2.0.0,special_id:55530000}\n"
973 "{product_name:Archer A6,product_ver:2.0.0,special_id:54570000}\n"
974 "{product_name:Archer C6,product_ver:2.0.0,special_id:55530000}\n",
975 .support_trail
= '\x00',
976 .soft_ver
= "soft_ver:1.9.1\n",
979 {"factory-boot", 0x00000, 0x20000},
980 {"default-mac", 0x20000, 0x00200},
981 {"pin", 0x20200, 0x00100},
982 {"product-info", 0x20300, 0x00200},
983 {"device-id", 0x20500, 0x0fb00},
984 {"fs-uboot", 0x30000, 0x20000},
985 {"firmware", 0x50000, 0xf89400},
986 {"soft-version", 0xfd9400, 0x00100},
987 {"extra-para", 0xfd9500, 0x00100},
988 {"support-list", 0xfd9600, 0x00200},
989 {"profile", 0xfd9800, 0x03000},
990 {"default-config", 0xfdc800, 0x03000},
991 {"partition-table", 0xfdf800, 0x00800},
992 {"user-config", 0xfe0000, 0x0c000},
993 {"certificate", 0xfec000, 0x04000},
994 {"radio", 0xff0000, 0x10000},
997 .first_sysupgrade_partition
= "os-image",
998 .last_sysupgrade_partition
= "file-system",
1001 /** Firmware layout for the C60v1 */
1003 .id
= "ARCHER-C60-V1",
1007 "{product_name:Archer C60,product_ver:1.0.0,special_id:00000000}\r\n"
1008 "{product_name:Archer C60,product_ver:1.0.0,special_id:45550000}\r\n"
1009 "{product_name:Archer C60,product_ver:1.0.0,special_id:55530000}\r\n",
1010 .support_trail
= '\x00',
1011 .soft_ver
= "soft_ver:1.0.0\n",
1014 {"fs-uboot", 0x00000, 0x10000},
1015 {"default-mac", 0x10000, 0x00200},
1016 {"pin", 0x10200, 0x00200},
1017 {"product-info", 0x10400, 0x00100},
1018 {"partition-table", 0x10500, 0x00800},
1019 {"soft-version", 0x11300, 0x00200},
1020 {"support-list", 0x11500, 0x00100},
1021 {"device-id", 0x11600, 0x00100},
1022 {"profile", 0x11700, 0x03900},
1023 {"default-config", 0x15000, 0x04000},
1024 {"user-config", 0x19000, 0x04000},
1025 {"firmware", 0x20000, 0x7c8000},
1026 {"certyficate", 0x7e8000, 0x08000},
1027 {"radio", 0x7f0000, 0x10000},
1031 .first_sysupgrade_partition
= "os-image",
1032 .last_sysupgrade_partition
= "file-system",
1035 /** Firmware layout for the C60v2 */
1037 .id
= "ARCHER-C60-V2",
1041 "{product_name:Archer C60,product_ver:2.0.0,special_id:42520000}\r\n"
1042 "{product_name:Archer C60,product_ver:2.0.0,special_id:45550000}\r\n"
1043 "{product_name:Archer C60,product_ver:2.0.0,special_id:55530000}\r\n",
1044 .support_trail
= '\x00',
1045 .soft_ver
= "soft_ver:2.0.0\n",
1048 {"factory-boot", 0x00000, 0x1fb00},
1049 {"default-mac", 0x1fb00, 0x00200},
1050 {"pin", 0x1fd00, 0x00100},
1051 {"product-info", 0x1fe00, 0x00100},
1052 {"device-id", 0x1ff00, 0x00100},
1053 {"fs-uboot", 0x20000, 0x10000},
1054 {"firmware", 0x30000, 0x7a0000},
1055 {"soft-version", 0x7d9500, 0x00100},
1056 {"support-list", 0x7d9600, 0x00100},
1057 {"extra-para", 0x7d9700, 0x00100},
1058 {"profile", 0x7d9800, 0x03000},
1059 {"default-config", 0x7dc800, 0x03000},
1060 {"partition-table", 0x7df800, 0x00800},
1061 {"user-config", 0x7e0000, 0x0c000},
1062 {"certificate", 0x7ec000, 0x04000},
1063 {"radio", 0x7f0000, 0x10000},
1067 .first_sysupgrade_partition
= "os-image",
1068 .last_sysupgrade_partition
= "file-system",
1071 /** Firmware layout for the C60v3 */
1073 .id
= "ARCHER-C60-V3",
1077 "{product_name:Archer C60,product_ver:3.0.0,special_id:42520000}\r\n"
1078 "{product_name:Archer C60,product_ver:3.0.0,special_id:45550000}\r\n"
1079 "{product_name:Archer C60,product_ver:3.0.0,special_id:55530000}\r\n",
1080 .support_trail
= '\x00',
1081 .soft_ver
= "soft_ver:3.0.0\n",
1084 {"factory-boot", 0x00000, 0x1fb00},
1085 {"default-mac", 0x1fb00, 0x00200},
1086 {"pin", 0x1fd00, 0x00100},
1087 {"product-info", 0x1fe00, 0x00100},
1088 {"device-id", 0x1ff00, 0x00100},
1089 {"fs-uboot", 0x20000, 0x10000},
1090 {"firmware", 0x30000, 0x7a0000},
1091 {"soft-version", 0x7d9500, 0x00100},
1092 {"support-list", 0x7d9600, 0x00100},
1093 {"extra-para", 0x7d9700, 0x00100},
1094 {"profile", 0x7d9800, 0x03000},
1095 {"default-config", 0x7dc800, 0x03000},
1096 {"partition-table", 0x7df800, 0x00800},
1097 {"user-config", 0x7e0000, 0x0c000},
1098 {"certificate", 0x7ec000, 0x04000},
1099 {"radio", 0x7f0000, 0x10000},
1103 .first_sysupgrade_partition
= "os-image",
1104 .last_sysupgrade_partition
= "file-system",
1107 /** Firmware layout for the C5 */
1109 .id
= "ARCHER-C5-V2",
1113 "{product_name:ArcherC5,product_ver:2.0.0,special_id:00000000}\r\n"
1114 "{product_name:ArcherC5,product_ver:2.0.0,special_id:55530000}\r\n"
1115 "{product_name:ArcherC5,product_ver:2.0.0,special_id:4A500000}\r\n", /* JP version */
1116 .support_trail
= '\x00',
1120 {"fs-uboot", 0x00000, 0x40000},
1121 {"os-image", 0x40000, 0x200000},
1122 {"file-system", 0x240000, 0xc00000},
1123 {"default-mac", 0xe40000, 0x00200},
1124 {"pin", 0xe40200, 0x00200},
1125 {"product-info", 0xe40400, 0x00200},
1126 {"partition-table", 0xe50000, 0x10000},
1127 {"soft-version", 0xe60000, 0x00200},
1128 {"support-list", 0xe61000, 0x0f000},
1129 {"profile", 0xe70000, 0x10000},
1130 {"default-config", 0xe80000, 0x10000},
1131 {"user-config", 0xe90000, 0x50000},
1132 {"log", 0xee0000, 0x100000},
1133 {"radio_bk", 0xfe0000, 0x10000},
1134 {"radio", 0xff0000, 0x10000},
1138 .first_sysupgrade_partition
= "os-image",
1139 .last_sysupgrade_partition
= "file-system"
1142 /** Firmware layout for the C7 */
1144 .id
= "ARCHER-C7-V4",
1147 "{product_name:Archer C7,product_ver:4.0.0,special_id:00000000}\n"
1148 "{product_name:Archer C7,product_ver:4.0.0,special_id:41550000}\n"
1149 "{product_name:Archer C7,product_ver:4.0.0,special_id:45550000}\n"
1150 "{product_name:Archer C7,product_ver:4.0.0,special_id:4B520000}\n"
1151 "{product_name:Archer C7,product_ver:4.0.0,special_id:42520000}\n"
1152 "{product_name:Archer C7,product_ver:4.0.0,special_id:4A500000}\n"
1153 "{product_name:Archer C7,product_ver:4.0.0,special_id:52550000}\n"
1154 "{product_name:Archer C7,product_ver:4.0.0,special_id:54570000}\n"
1155 "{product_name:Archer C7,product_ver:4.0.0,special_id:55530000}\n"
1156 "{product_name:Archer C7,product_ver:4.0.0,special_id:43410000}\n",
1157 .support_trail
= '\x00',
1158 .soft_ver
= "soft_ver:1.0.0\n",
1160 /* We're using a dynamic kernel/rootfs split here */
1162 {"factory-boot", 0x00000, 0x20000},
1163 {"fs-uboot", 0x20000, 0x20000},
1164 {"firmware", 0x40000, 0xEC0000}, /* Stock: name os-image base 0x40000 size 0x120000 */
1165 /* Stock: name file-system base 0x160000 size 0xda0000 */
1166 {"default-mac", 0xf00000, 0x00200},
1167 {"pin", 0xf00200, 0x00200},
1168 {"device-id", 0xf00400, 0x00100},
1169 {"product-info", 0xf00500, 0x0fb00},
1170 {"soft-version", 0xf10000, 0x00100},
1171 {"extra-para", 0xf11000, 0x01000},
1172 {"support-list", 0xf12000, 0x0a000},
1173 {"profile", 0xf1c000, 0x04000},
1174 {"default-config", 0xf20000, 0x10000},
1175 {"user-config", 0xf30000, 0x40000},
1176 {"qos-db", 0xf70000, 0x40000},
1177 {"certificate", 0xfb0000, 0x10000},
1178 {"partition-table", 0xfc0000, 0x10000},
1179 {"log", 0xfd0000, 0x20000},
1180 {"radio", 0xff0000, 0x10000},
1184 .first_sysupgrade_partition
= "os-image",
1185 .last_sysupgrade_partition
= "file-system",
1188 /** Firmware layout for the C7 v5*/
1190 .id
= "ARCHER-C7-V5",
1193 "{product_name:Archer C7,product_ver:5.0.0,special_id:00000000}\n"
1194 "{product_name:Archer C7,product_ver:5.0.0,special_id:45550000}\n"
1195 "{product_name:Archer C7,product_ver:5.0.0,special_id:55530000}\n"
1196 "{product_name:Archer C7,product_ver:5.0.0,special_id:43410000}\n"
1197 "{product_name:Archer C7,product_ver:5.0.0,special_id:4A500000}\n"
1198 "{product_name:Archer C7,product_ver:5.0.0,special_id:54570000}\n"
1199 "{product_name:Archer C7,product_ver:5.0.0,special_id:52550000}\n"
1200 "{product_name:Archer C7,product_ver:5.0.0,special_id:4B520000}\n",
1202 .support_trail
= '\x00',
1203 .soft_ver
= "soft_ver:1.0.0\n",
1205 /* We're using a dynamic kernel/rootfs split here */
1207 {"factory-boot", 0x00000, 0x20000},
1208 {"fs-uboot", 0x20000, 0x20000},
1209 {"partition-table", 0x40000, 0x10000},
1210 {"radio", 0x50000, 0x10000},
1211 {"default-mac", 0x60000, 0x00200},
1212 {"pin", 0x60200, 0x00200},
1213 {"device-id", 0x60400, 0x00100},
1214 {"product-info", 0x60500, 0x0fb00},
1215 {"soft-version", 0x70000, 0x01000},
1216 {"extra-para", 0x71000, 0x01000},
1217 {"support-list", 0x72000, 0x0a000},
1218 {"profile", 0x7c000, 0x04000},
1219 {"user-config", 0x80000, 0x40000},
1222 {"firmware", 0xc0000, 0xf00000}, /* Stock: name os-image base 0xc0000 size 0x120000 */
1223 /* Stock: name file-system base 0x1e0000 size 0xde0000 */
1225 {"log", 0xfc0000, 0x20000},
1226 {"certificate", 0xfe0000, 0x10000},
1227 {"default-config", 0xff0000, 0x10000},
1232 .first_sysupgrade_partition
= "os-image",
1233 .last_sysupgrade_partition
= "file-system",
1236 /** Firmware layout for the C9 */
1242 "{product_name:ArcherC9,"
1243 "product_ver:1.0.0,"
1244 "special_id:00000000}\n",
1245 .support_trail
= '\x00',
1249 {"fs-uboot", 0x00000, 0x40000},
1250 {"os-image", 0x40000, 0x200000},
1251 {"file-system", 0x240000, 0xc00000},
1252 {"default-mac", 0xe40000, 0x00200},
1253 {"pin", 0xe40200, 0x00200},
1254 {"product-info", 0xe40400, 0x00200},
1255 {"partition-table", 0xe50000, 0x10000},
1256 {"soft-version", 0xe60000, 0x00200},
1257 {"support-list", 0xe61000, 0x0f000},
1258 {"profile", 0xe70000, 0x10000},
1259 {"default-config", 0xe80000, 0x10000},
1260 {"user-config", 0xe90000, 0x50000},
1261 {"log", 0xee0000, 0x100000},
1262 {"radio_bk", 0xfe0000, 0x10000},
1263 {"radio", 0xff0000, 0x10000},
1267 .first_sysupgrade_partition
= "os-image",
1268 .last_sysupgrade_partition
= "file-system"
1271 /** Firmware layout for the EAP120 */
1274 .vendor
= "EAP120(TP-LINK|UN|N300-2):1.0\r\n",
1277 "EAP120(TP-LINK|UN|N300-2):1.0\r\n",
1278 .support_trail
= '\xff',
1282 {"fs-uboot", 0x00000, 0x20000},
1283 {"partition-table", 0x20000, 0x02000},
1284 {"default-mac", 0x30000, 0x00020},
1285 {"support-list", 0x31000, 0x00100},
1286 {"product-info", 0x31100, 0x00100},
1287 {"soft-version", 0x32000, 0x00100},
1288 {"os-image", 0x40000, 0x180000},
1289 {"file-system", 0x1c0000, 0x600000},
1290 {"user-config", 0x7c0000, 0x10000},
1291 {"backup-config", 0x7d0000, 0x10000},
1292 {"log", 0x7e0000, 0x10000},
1293 {"radio", 0x7f0000, 0x10000},
1297 .first_sysupgrade_partition
= "os-image",
1298 .last_sysupgrade_partition
= "file-system"
1301 /** Firmware layout for the EAP225-Wall v2 */
1303 .id
= "EAP225-WALL-V2",
1306 "EAP225-Wall(TP-Link|UN|AC1200-D):2.0\r\n",
1307 .support_trail
= '\xff',
1309 .soft_ver_compat_level
= 1,
1312 {"fs-uboot", 0x00000, 0x20000},
1313 {"partition-table", 0x20000, 0x02000},
1314 {"default-mac", 0x30000, 0x01000},
1315 {"support-list", 0x31000, 0x00100},
1316 {"product-info", 0x31100, 0x00400},
1317 {"soft-version", 0x32000, 0x00100},
1318 {"firmware", 0x40000, 0xd80000},
1319 {"user-config", 0xdc0000, 0x30000},
1320 {"mutil-log", 0xf30000, 0x80000},
1321 {"oops", 0xfb0000, 0x40000},
1322 {"radio", 0xff0000, 0x10000},
1326 .first_sysupgrade_partition
= "os-image",
1327 .last_sysupgrade_partition
= "file-system"
1330 /** Firmware layout for the EAP245 v1 */
1335 "EAP245(TP-LINK|UN|AC1750-D):1.0\r\n",
1336 .support_trail
= '\xff',
1340 {"fs-uboot", 0x00000, 0x20000},
1341 {"partition-table", 0x20000, 0x02000},
1342 {"default-mac", 0x30000, 0x01000},
1343 {"support-list", 0x31000, 0x00100},
1344 {"product-info", 0x31100, 0x00400},
1345 {"soft-version", 0x32000, 0x00100},
1346 {"firmware", 0x40000, 0xd80000},
1347 {"user-config", 0xdc0000, 0x30000},
1348 {"radio", 0xff0000, 0x10000},
1352 .first_sysupgrade_partition
= "os-image",
1353 .last_sysupgrade_partition
= "file-system"
1356 /** Firmware layout for the EAP245 v3 */
1361 "EAP245(TP-Link|UN|AC1750-D):3.0\r\n",
1362 .support_trail
= '\xff',
1364 .soft_ver_compat_level
= 1,
1366 /** Firmware partition with dynamic kernel/rootfs split */
1368 {"factroy-boot", 0x00000, 0x40000},
1369 {"fs-uboot", 0x40000, 0x40000},
1370 {"partition-table", 0x80000, 0x10000},
1371 {"default-mac", 0x90000, 0x01000},
1372 {"support-list", 0x91000, 0x00100},
1373 {"product-info", 0x91100, 0x00400},
1374 {"soft-version", 0x92000, 0x00100},
1375 {"radio", 0xa0000, 0x10000},
1376 {"extra-para", 0xb0000, 0x10000},
1377 {"firmware", 0xc0000, 0xe40000},
1378 {"config", 0xf00000, 0x30000},
1379 {"mutil-log", 0xf30000, 0x80000},
1380 {"oops", 0xfb0000, 0x40000},
1384 .first_sysupgrade_partition
= "os-image",
1385 .last_sysupgrade_partition
= "file-system"
1388 /** Firmware layout for the TL-WA850RE v2 */
1390 .id
= "TLWA850REV2",
1394 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:55530000}\n"
1395 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:00000000}\n"
1396 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:55534100}\n"
1397 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:45550000}\n"
1398 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:4B520000}\n"
1399 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:42520000}\n"
1400 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:4A500000}\n"
1401 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:43410000}\n"
1402 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:41550000}\n"
1403 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:52550000}\n",
1404 .support_trail
= '\x00',
1408 576KB were moved from file-system to os-image
1409 in comparison to the stock image
1412 {"fs-uboot", 0x00000, 0x20000},
1413 {"firmware", 0x20000, 0x390000},
1414 {"partition-table", 0x3b0000, 0x02000},
1415 {"default-mac", 0x3c0000, 0x00020},
1416 {"pin", 0x3c0100, 0x00020},
1417 {"product-info", 0x3c1000, 0x01000},
1418 {"soft-version", 0x3c2000, 0x00100},
1419 {"support-list", 0x3c3000, 0x01000},
1420 {"profile", 0x3c4000, 0x08000},
1421 {"user-config", 0x3d0000, 0x10000},
1422 {"default-config", 0x3e0000, 0x10000},
1423 {"radio", 0x3f0000, 0x10000},
1427 .first_sysupgrade_partition
= "os-image",
1428 .last_sysupgrade_partition
= "file-system"
1431 /** Firmware layout for the TL-WA855RE v1 */
1433 .id
= "TLWA855REV1",
1437 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:00000000}\n"
1438 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:55530000}\n"
1439 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:45550000}\n"
1440 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:4B520000}\n"
1441 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:42520000}\n"
1442 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:4A500000}\n"
1443 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:43410000}\n"
1444 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:41550000}\n"
1445 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:52550000}\n",
1446 .support_trail
= '\x00',
1450 {"fs-uboot", 0x00000, 0x20000},
1451 {"os-image", 0x20000, 0x150000},
1452 {"file-system", 0x170000, 0x240000},
1453 {"partition-table", 0x3b0000, 0x02000},
1454 {"default-mac", 0x3c0000, 0x00020},
1455 {"pin", 0x3c0100, 0x00020},
1456 {"product-info", 0x3c1000, 0x01000},
1457 {"soft-version", 0x3c2000, 0x00100},
1458 {"support-list", 0x3c3000, 0x01000},
1459 {"profile", 0x3c4000, 0x08000},
1460 {"user-config", 0x3d0000, 0x10000},
1461 {"default-config", 0x3e0000, 0x10000},
1462 {"radio", 0x3f0000, 0x10000},
1466 .first_sysupgrade_partition
= "os-image",
1467 .last_sysupgrade_partition
= "file-system"
1470 /** Firmware layout for the TL-WPA8630P v2 (EU)*/
1472 .id
= "TL-WPA8630P-V2.0-EU",
1476 "{product_name:TL-WPA8630P,product_ver:2.0.0,special_id:45550000}\n",
1477 .support_trail
= '\x00',
1481 {"factory-uboot", 0x00000, 0x20000},
1482 {"fs-uboot", 0x20000, 0x20000},
1483 {"firmware", 0x40000, 0x5e0000},
1484 {"partition-table", 0x620000, 0x02000},
1485 {"default-mac", 0x630000, 0x00020},
1486 {"pin", 0x630100, 0x00020},
1487 {"device-id", 0x630200, 0x00030},
1488 {"product-info", 0x631100, 0x01000},
1489 {"extra-para", 0x632100, 0x01000},
1490 {"soft-version", 0x640000, 0x01000},
1491 {"support-list", 0x641000, 0x01000},
1492 {"profile", 0x642000, 0x08000},
1493 {"user-config", 0x650000, 0x10000},
1494 {"default-config", 0x660000, 0x10000},
1495 {"default-nvm", 0x670000, 0xc0000},
1496 {"default-pib", 0x730000, 0x40000},
1497 {"radio", 0x7f0000, 0x10000},
1501 .first_sysupgrade_partition
= "os-image",
1502 .last_sysupgrade_partition
= "file-system"
1505 /** Firmware layout for the TL-WPA8630P v2 (INT)*/
1507 .id
= "TL-WPA8630P-V2-INT",
1511 "{product_name:TL-WPA8630P,product_ver:2.0.0,special_id:41550000}\n"
1512 "{product_name:TL-WPA8630P,product_ver:2.0.0,special_id:44450000}\n"
1513 "{product_name:TL-WPA8630P,product_ver:2.1.0,special_id:41550000}\n",
1514 .support_trail
= '\x00',
1518 {"factory-uboot", 0x00000, 0x20000},
1519 {"fs-uboot", 0x20000, 0x20000},
1520 {"firmware", 0x40000, 0x5e0000},
1521 {"partition-table", 0x620000, 0x02000},
1522 {"extra-para", 0x632100, 0x01000},
1523 {"soft-version", 0x640000, 0x01000},
1524 {"support-list", 0x641000, 0x01000},
1525 {"profile", 0x642000, 0x08000},
1526 {"user-config", 0x650000, 0x10000},
1527 {"default-config", 0x660000, 0x10000},
1528 {"default-nvm", 0x670000, 0xc0000},
1529 {"default-pib", 0x730000, 0x40000},
1530 {"default-mac", 0x7e0000, 0x00020},
1531 {"pin", 0x7e0100, 0x00020},
1532 {"device-id", 0x7e0200, 0x00030},
1533 {"product-info", 0x7e1100, 0x01000},
1534 {"radio", 0x7f0000, 0x10000},
1538 .first_sysupgrade_partition
= "os-image",
1539 .last_sysupgrade_partition
= "file-system"
1542 /** Firmware layout for the TL-WPA8630P v2.1 (EU)*/
1544 .id
= "TL-WPA8630P-V2.1-EU",
1548 "{product_name:TL-WPA8630P,product_ver:2.1.0,special_id:45550000}\n",
1549 .support_trail
= '\x00',
1553 {"factory-uboot", 0x00000, 0x20000},
1554 {"fs-uboot", 0x20000, 0x20000},
1555 {"firmware", 0x40000, 0x5e0000},
1556 {"extra-para", 0x680000, 0x01000},
1557 {"product-info", 0x690000, 0x01000},
1558 {"partition-table", 0x6a0000, 0x02000},
1559 {"soft-version", 0x6b0000, 0x01000},
1560 {"support-list", 0x6b1000, 0x01000},
1561 {"profile", 0x6b2000, 0x08000},
1562 {"user-config", 0x6c0000, 0x10000},
1563 {"default-config", 0x6d0000, 0x10000},
1564 {"default-nvm", 0x6e0000, 0xc0000},
1565 {"default-pib", 0x7a0000, 0x40000},
1566 {"default-mac", 0x7e0000, 0x00020},
1567 {"pin", 0x7e0100, 0x00020},
1568 {"device-id", 0x7e0200, 0x00030},
1569 {"radio", 0x7f0000, 0x10000},
1573 .first_sysupgrade_partition
= "os-image",
1574 .last_sysupgrade_partition
= "file-system"
1577 /** Firmware layout for the TL-WR1043 v5 */
1579 .id
= "TLWR1043NV5",
1583 "{product_name:TL-WR1043N,product_ver:5.0.0,special_id:45550000}\n"
1584 "{product_name:TL-WR1043N,product_ver:5.0.0,special_id:55530000}\n",
1585 .support_trail
= '\x00',
1586 .soft_ver
= "soft_ver:1.0.0\n",
1588 {"factory-boot", 0x00000, 0x20000},
1589 {"fs-uboot", 0x20000, 0x20000},
1590 {"firmware", 0x40000, 0xec0000},
1591 {"default-mac", 0xf00000, 0x00200},
1592 {"pin", 0xf00200, 0x00200},
1593 {"device-id", 0xf00400, 0x00100},
1594 {"product-info", 0xf00500, 0x0fb00},
1595 {"soft-version", 0xf10000, 0x01000},
1596 {"extra-para", 0xf11000, 0x01000},
1597 {"support-list", 0xf12000, 0x0a000},
1598 {"profile", 0xf1c000, 0x04000},
1599 {"default-config", 0xf20000, 0x10000},
1600 {"user-config", 0xf30000, 0x40000},
1601 {"qos-db", 0xf70000, 0x40000},
1602 {"certificate", 0xfb0000, 0x10000},
1603 {"partition-table", 0xfc0000, 0x10000},
1604 {"log", 0xfd0000, 0x20000},
1605 {"radio", 0xff0000, 0x10000},
1608 .first_sysupgrade_partition
= "os-image",
1609 .last_sysupgrade_partition
= "file-system"
1612 /** Firmware layout for the TL-WR1043 v4 */
1614 .id
= "TLWR1043NDV4",
1618 "{product_name:TL-WR1043ND,product_ver:4.0.0,special_id:45550000}\n",
1619 .support_trail
= '\x00',
1622 /* We're using a dynamic kernel/rootfs split here */
1624 {"fs-uboot", 0x00000, 0x20000},
1625 {"firmware", 0x20000, 0xf30000},
1626 {"default-mac", 0xf50000, 0x00200},
1627 {"pin", 0xf50200, 0x00200},
1628 {"product-info", 0xf50400, 0x0fc00},
1629 {"soft-version", 0xf60000, 0x0b000},
1630 {"support-list", 0xf6b000, 0x04000},
1631 {"profile", 0xf70000, 0x04000},
1632 {"default-config", 0xf74000, 0x0b000},
1633 {"user-config", 0xf80000, 0x40000},
1634 {"partition-table", 0xfc0000, 0x10000},
1635 {"log", 0xfd0000, 0x20000},
1636 {"radio", 0xff0000, 0x10000},
1640 .first_sysupgrade_partition
= "os-image",
1641 .last_sysupgrade_partition
= "file-system"
1644 /** Firmware layout for the TL-WR902AC v1 */
1646 .id
= "TL-WR902AC-V1",
1650 "{product_name:TL-WR902AC,product_ver:1.0.0,special_id:45550000}\n"
1651 "{product_name:TL-WR902AC,product_ver:1.0.0,special_id:55530000}\n",
1652 .support_trail
= '\x00',
1656 384KB were moved from file-system to os-image
1657 in comparison to the stock image
1660 {"fs-uboot", 0x00000, 0x20000},
1661 {"firmware", 0x20000, 0x730000},
1662 {"default-mac", 0x750000, 0x00200},
1663 {"pin", 0x750200, 0x00200},
1664 {"product-info", 0x750400, 0x0fc00},
1665 {"soft-version", 0x760000, 0x0b000},
1666 {"support-list", 0x76b000, 0x04000},
1667 {"profile", 0x770000, 0x04000},
1668 {"default-config", 0x774000, 0x0b000},
1669 {"user-config", 0x780000, 0x40000},
1670 {"partition-table", 0x7c0000, 0x10000},
1671 {"log", 0x7d0000, 0x20000},
1672 {"radio", 0x7f0000, 0x10000},
1676 .first_sysupgrade_partition
= "os-image",
1677 .last_sysupgrade_partition
= "file-system",
1680 /** Firmware layout for the TL-WR942N V1 */
1686 "{product_name:TL-WR942N,product_ver:1.0.0,special_id:00000000}\r\n"
1687 "{product_name:TL-WR942N,product_ver:1.0.0,special_id:52550000}\r\n",
1688 .support_trail
= '\x00',
1692 {"fs-uboot", 0x00000, 0x20000},
1693 {"firmware", 0x20000, 0xe20000},
1694 {"default-mac", 0xe40000, 0x00200},
1695 {"pin", 0xe40200, 0x00200},
1696 {"product-info", 0xe40400, 0x0fc00},
1697 {"partition-table", 0xe50000, 0x10000},
1698 {"soft-version", 0xe60000, 0x10000},
1699 {"support-list", 0xe70000, 0x10000},
1700 {"profile", 0xe80000, 0x10000},
1701 {"default-config", 0xe90000, 0x10000},
1702 {"user-config", 0xea0000, 0x40000},
1703 {"qos-db", 0xee0000, 0x40000},
1704 {"certificate", 0xf20000, 0x10000},
1705 {"usb-config", 0xfb0000, 0x10000},
1706 {"log", 0xfc0000, 0x20000},
1707 {"radio-bk", 0xfe0000, 0x10000},
1708 {"radio", 0xff0000, 0x10000},
1712 .first_sysupgrade_partition
= "os-image",
1713 .last_sysupgrade_partition
= "file-system",
1716 /** Firmware layout for the RE200 v2 */
1722 "{product_name:RE200,product_ver:2.0.0,special_id:00000000}\n"
1723 "{product_name:RE200,product_ver:2.0.0,special_id:41520000}\n"
1724 "{product_name:RE200,product_ver:2.0.0,special_id:41550000}\n"
1725 "{product_name:RE200,product_ver:2.0.0,special_id:42520000}\n"
1726 "{product_name:RE200,product_ver:2.0.0,special_id:43410000}\n"
1727 "{product_name:RE200,product_ver:2.0.0,special_id:45530000}\n"
1728 "{product_name:RE200,product_ver:2.0.0,special_id:45550000}\n"
1729 "{product_name:RE200,product_ver:2.0.0,special_id:49440000}\n"
1730 "{product_name:RE200,product_ver:2.0.0,special_id:4a500000}\n"
1731 "{product_name:RE200,product_ver:2.0.0,special_id:4b520000}\n"
1732 "{product_name:RE200,product_ver:2.0.0,special_id:52550000}\n"
1733 "{product_name:RE200,product_ver:2.0.0,special_id:54570000}\n"
1734 "{product_name:RE200,product_ver:2.0.0,special_id:55530000}\n",
1735 .support_trail
= '\x00',
1739 {"fs-uboot", 0x00000, 0x20000},
1740 {"firmware", 0x20000, 0x7a0000},
1741 {"partition-table", 0x7c0000, 0x02000},
1742 {"default-mac", 0x7c2000, 0x00020},
1743 {"pin", 0x7c2100, 0x00020},
1744 {"product-info", 0x7c3100, 0x01000},
1745 {"soft-version", 0x7c4200, 0x01000},
1746 {"support-list", 0x7c5200, 0x01000},
1747 {"profile", 0x7c6200, 0x08000},
1748 {"config-info", 0x7ce200, 0x00400},
1749 {"user-config", 0x7d0000, 0x10000},
1750 {"default-config", 0x7e0000, 0x10000},
1751 {"radio", 0x7f0000, 0x10000},
1755 .first_sysupgrade_partition
= "os-image",
1756 .last_sysupgrade_partition
= "file-system"
1759 /** Firmware layout for the RE200 v3 */
1765 "{product_name:RE200,product_ver:3.0.0,special_id:00000000}\n"
1766 "{product_name:RE200,product_ver:3.0.0,special_id:41520000}\n"
1767 "{product_name:RE200,product_ver:3.0.0,special_id:41550000}\n"
1768 "{product_name:RE200,product_ver:3.0.0,special_id:42520000}\n"
1769 "{product_name:RE200,product_ver:3.0.0,special_id:43410000}\n"
1770 "{product_name:RE200,product_ver:3.0.0,special_id:45470000}\n"
1771 "{product_name:RE200,product_ver:3.0.0,special_id:45530000}\n"
1772 "{product_name:RE200,product_ver:3.0.0,special_id:45550000}\n"
1773 "{product_name:RE200,product_ver:3.0.0,special_id:49440000}\n"
1774 "{product_name:RE200,product_ver:3.0.0,special_id:4A500000}\n"
1775 "{product_name:RE200,product_ver:3.0.0,special_id:4B520000}\n"
1776 "{product_name:RE200,product_ver:3.0.0,special_id:52550000}\n"
1777 "{product_name:RE200,product_ver:3.0.0,special_id:54570000}\n"
1778 "{product_name:RE200,product_ver:3.0.0,special_id:55530000}\n",
1779 .support_trail
= '\x00',
1783 {"fs-uboot", 0x00000, 0x20000},
1784 {"firmware", 0x20000, 0x7a0000},
1785 {"partition-table", 0x7c0000, 0x02000},
1786 {"default-mac", 0x7c2000, 0x00020},
1787 {"pin", 0x7c2100, 0x00020},
1788 {"product-info", 0x7c3100, 0x01000},
1789 {"soft-version", 0x7c4200, 0x01000},
1790 {"support-list", 0x7c5200, 0x01000},
1791 {"profile", 0x7c6200, 0x08000},
1792 {"config-info", 0x7ce200, 0x00400},
1793 {"user-config", 0x7d0000, 0x10000},
1794 {"default-config", 0x7e0000, 0x10000},
1795 {"radio", 0x7f0000, 0x10000},
1799 .first_sysupgrade_partition
= "os-image",
1800 .last_sysupgrade_partition
= "file-system"
1803 /** Firmware layout for the RE200 v4 */
1809 "{product_name:RE200,product_ver:4.0.0,special_id:00000000}\n"
1810 "{product_name:RE200,product_ver:4.0.0,special_id:45550000}\n"
1811 "{product_name:RE200,product_ver:4.0.0,special_id:4A500000}\n"
1812 "{product_name:RE200,product_ver:4.0.0,special_id:4B520000}\n"
1813 "{product_name:RE200,product_ver:4.0.0,special_id:43410000}\n"
1814 "{product_name:RE200,product_ver:4.0.0,special_id:41550000}\n"
1815 "{product_name:RE200,product_ver:4.0.0,special_id:42520000}\n"
1816 "{product_name:RE200,product_ver:4.0.0,special_id:55530000}\n"
1817 "{product_name:RE200,product_ver:4.0.0,special_id:41520000}\n"
1818 "{product_name:RE200,product_ver:4.0.0,special_id:52550000}\n"
1819 "{product_name:RE200,product_ver:4.0.0,special_id:54570000}\n"
1820 "{product_name:RE200,product_ver:4.0.0,special_id:45530000}\n"
1821 "{product_name:RE200,product_ver:4.0.0,special_id:49440000}\n"
1822 "{product_name:RE200,product_ver:4.0.0,special_id:45470000}\n",
1823 .support_trail
= '\x00',
1824 .soft_ver
= "soft_ver:1.1.0\n",
1827 {"fs-uboot", 0x00000, 0x20000},
1828 {"firmware", 0x20000, 0x7a0000},
1829 {"partition-table", 0x7c0000, 0x02000},
1830 {"default-mac", 0x7c2000, 0x00020},
1831 {"pin", 0x7c2100, 0x00020},
1832 {"product-info", 0x7c3100, 0x01000},
1833 {"soft-version", 0x7c4200, 0x01000},
1834 {"support-list", 0x7c5200, 0x01000},
1835 {"profile", 0x7c6200, 0x08000},
1836 {"config-info", 0x7ce200, 0x00400},
1837 {"user-config", 0x7d0000, 0x10000},
1838 {"default-config", 0x7e0000, 0x10000},
1839 {"radio", 0x7f0000, 0x10000},
1843 .first_sysupgrade_partition
= "os-image",
1844 .last_sysupgrade_partition
= "file-system"
1847 /** Firmware layout for the RE220 v2 */
1853 "{product_name:RE220,product_ver:2.0.0,special_id:00000000}\n"
1854 "{product_name:RE220,product_ver:2.0.0,special_id:41520000}\n"
1855 "{product_name:RE220,product_ver:2.0.0,special_id:41550000}\n"
1856 "{product_name:RE220,product_ver:2.0.0,special_id:42520000}\n"
1857 "{product_name:RE220,product_ver:2.0.0,special_id:43410000}\n"
1858 "{product_name:RE220,product_ver:2.0.0,special_id:45530000}\n"
1859 "{product_name:RE220,product_ver:2.0.0,special_id:45550000}\n"
1860 "{product_name:RE220,product_ver:2.0.0,special_id:49440000}\n"
1861 "{product_name:RE220,product_ver:2.0.0,special_id:4a500000}\n"
1862 "{product_name:RE220,product_ver:2.0.0,special_id:4b520000}\n"
1863 "{product_name:RE220,product_ver:2.0.0,special_id:52550000}\n"
1864 "{product_name:RE220,product_ver:2.0.0,special_id:54570000}\n"
1865 "{product_name:RE220,product_ver:2.0.0,special_id:55530000}\n",
1866 .support_trail
= '\x00',
1870 {"fs-uboot", 0x00000, 0x20000},
1871 {"firmware", 0x20000, 0x7a0000},
1872 {"partition-table", 0x7c0000, 0x02000},
1873 {"default-mac", 0x7c2000, 0x00020},
1874 {"pin", 0x7c2100, 0x00020},
1875 {"product-info", 0x7c3100, 0x01000},
1876 {"soft-version", 0x7c4200, 0x01000},
1877 {"support-list", 0x7c5200, 0x01000},
1878 {"profile", 0x7c6200, 0x08000},
1879 {"config-info", 0x7ce200, 0x00400},
1880 {"user-config", 0x7d0000, 0x10000},
1881 {"default-config", 0x7e0000, 0x10000},
1882 {"radio", 0x7f0000, 0x10000},
1886 .first_sysupgrade_partition
= "os-image",
1887 .last_sysupgrade_partition
= "file-system"
1890 /** Firmware layout for the RE305 v1 */
1896 "{product_name:RE305,product_ver:1.0.0,special_id:45550000}\n"
1897 "{product_name:RE305,product_ver:1.0.0,special_id:55530000}\n"
1898 "{product_name:RE305,product_ver:1.0.0,special_id:4a500000}\n"
1899 "{product_name:RE305,product_ver:1.0.0,special_id:42520000}\n"
1900 "{product_name:RE305,product_ver:1.0.0,special_id:4b520000}\n"
1901 "{product_name:RE305,product_ver:1.0.0,special_id:41550000}\n"
1902 "{product_name:RE305,product_ver:1.0.0,special_id:43410000}\n",
1903 .support_trail
= '\x00',
1907 {"fs-uboot", 0x00000, 0x20000},
1908 {"firmware", 0x20000, 0x5e0000},
1909 {"partition-table", 0x600000, 0x02000},
1910 {"default-mac", 0x610000, 0x00020},
1911 {"pin", 0x610100, 0x00020},
1912 {"product-info", 0x611100, 0x01000},
1913 {"soft-version", 0x620000, 0x01000},
1914 {"support-list", 0x621000, 0x01000},
1915 {"profile", 0x622000, 0x08000},
1916 {"user-config", 0x630000, 0x10000},
1917 {"default-config", 0x640000, 0x10000},
1918 {"radio", 0x7f0000, 0x10000},
1922 .first_sysupgrade_partition
= "os-image",
1923 .last_sysupgrade_partition
= "file-system"
1926 /** Firmware layout for the RE350 v1 */
1932 "{product_name:RE350,product_ver:1.0.0,special_id:45550000}\n"
1933 "{product_name:RE350,product_ver:1.0.0,special_id:00000000}\n"
1934 "{product_name:RE350,product_ver:1.0.0,special_id:41550000}\n"
1935 "{product_name:RE350,product_ver:1.0.0,special_id:55530000}\n"
1936 "{product_name:RE350,product_ver:1.0.0,special_id:43410000}\n"
1937 "{product_name:RE350,product_ver:1.0.0,special_id:4b520000}\n"
1938 "{product_name:RE350,product_ver:1.0.0,special_id:4a500000}\n",
1939 .support_trail
= '\x00',
1942 /** We're using a dynamic kernel/rootfs split here */
1944 {"fs-uboot", 0x00000, 0x20000},
1945 {"firmware", 0x20000, 0x5e0000},
1946 {"partition-table", 0x600000, 0x02000},
1947 {"default-mac", 0x610000, 0x00020},
1948 {"pin", 0x610100, 0x00020},
1949 {"product-info", 0x611100, 0x01000},
1950 {"soft-version", 0x620000, 0x01000},
1951 {"support-list", 0x621000, 0x01000},
1952 {"profile", 0x622000, 0x08000},
1953 {"user-config", 0x630000, 0x10000},
1954 {"default-config", 0x640000, 0x10000},
1955 {"radio", 0x7f0000, 0x10000},
1959 .first_sysupgrade_partition
= "os-image",
1960 .last_sysupgrade_partition
= "file-system"
1963 /** Firmware layout for the RE350K v1 */
1969 "{product_name:RE350K,product_ver:1.0.0,special_id:00000000,product_region:US}\n",
1970 .support_trail
= '\x00',
1973 /** We're using a dynamic kernel/rootfs split here */
1975 {"fs-uboot", 0x00000, 0x20000},
1976 {"firmware", 0x20000, 0xd70000},
1977 {"partition-table", 0xd90000, 0x02000},
1978 {"default-mac", 0xda0000, 0x00020},
1979 {"pin", 0xda0100, 0x00020},
1980 {"product-info", 0xda1100, 0x01000},
1981 {"soft-version", 0xdb0000, 0x01000},
1982 {"support-list", 0xdb1000, 0x01000},
1983 {"profile", 0xdb2000, 0x08000},
1984 {"user-config", 0xdc0000, 0x10000},
1985 {"default-config", 0xdd0000, 0x10000},
1986 {"device-id", 0xde0000, 0x00108},
1987 {"radio", 0xff0000, 0x10000},
1991 .first_sysupgrade_partition
= "os-image",
1992 .last_sysupgrade_partition
= "file-system"
1995 /** Firmware layout for the RE355 */
2001 "{product_name:RE355,product_ver:1.0.0,special_id:00000000}\r\n"
2002 "{product_name:RE355,product_ver:1.0.0,special_id:55530000}\r\n"
2003 "{product_name:RE355,product_ver:1.0.0,special_id:45550000}\r\n"
2004 "{product_name:RE355,product_ver:1.0.0,special_id:4A500000}\r\n"
2005 "{product_name:RE355,product_ver:1.0.0,special_id:43410000}\r\n"
2006 "{product_name:RE355,product_ver:1.0.0,special_id:41550000}\r\n"
2007 "{product_name:RE355,product_ver:1.0.0,special_id:4B520000}\r\n"
2008 "{product_name:RE355,product_ver:1.0.0,special_id:55534100}\r\n",
2009 .support_trail
= '\x00',
2012 /* We're using a dynamic kernel/rootfs split here */
2014 {"fs-uboot", 0x00000, 0x20000},
2015 {"firmware", 0x20000, 0x5e0000},
2016 {"partition-table", 0x600000, 0x02000},
2017 {"default-mac", 0x610000, 0x00020},
2018 {"pin", 0x610100, 0x00020},
2019 {"product-info", 0x611100, 0x01000},
2020 {"soft-version", 0x620000, 0x01000},
2021 {"support-list", 0x621000, 0x01000},
2022 {"profile", 0x622000, 0x08000},
2023 {"user-config", 0x630000, 0x10000},
2024 {"default-config", 0x640000, 0x10000},
2025 {"radio", 0x7f0000, 0x10000},
2029 .first_sysupgrade_partition
= "os-image",
2030 .last_sysupgrade_partition
= "file-system"
2033 /** Firmware layout for the RE450 */
2039 "{product_name:RE450,product_ver:1.0.0,special_id:00000000}\r\n"
2040 "{product_name:RE450,product_ver:1.0.0,special_id:55530000}\r\n"
2041 "{product_name:RE450,product_ver:1.0.0,special_id:45550000}\r\n"
2042 "{product_name:RE450,product_ver:1.0.0,special_id:4A500000}\r\n"
2043 "{product_name:RE450,product_ver:1.0.0,special_id:43410000}\r\n"
2044 "{product_name:RE450,product_ver:1.0.0,special_id:41550000}\r\n"
2045 "{product_name:RE450,product_ver:1.0.0,special_id:4B520000}\r\n"
2046 "{product_name:RE450,product_ver:1.0.0,special_id:55534100}\r\n",
2047 .support_trail
= '\x00',
2050 /** We're using a dynamic kernel/rootfs split here */
2052 {"fs-uboot", 0x00000, 0x20000},
2053 {"firmware", 0x20000, 0x5e0000},
2054 {"partition-table", 0x600000, 0x02000},
2055 {"default-mac", 0x610000, 0x00020},
2056 {"pin", 0x610100, 0x00020},
2057 {"product-info", 0x611100, 0x01000},
2058 {"soft-version", 0x620000, 0x01000},
2059 {"support-list", 0x621000, 0x01000},
2060 {"profile", 0x622000, 0x08000},
2061 {"user-config", 0x630000, 0x10000},
2062 {"default-config", 0x640000, 0x10000},
2063 {"radio", 0x7f0000, 0x10000},
2067 .first_sysupgrade_partition
= "os-image",
2068 .last_sysupgrade_partition
= "file-system"
2071 /** Firmware layout for the RE450 v2 */
2077 "{product_name:RE450,product_ver:2.0.0,special_id:00000000}\r\n"
2078 "{product_name:RE450,product_ver:2.0.0,special_id:55530000}\r\n"
2079 "{product_name:RE450,product_ver:2.0.0,special_id:45550000}\r\n"
2080 "{product_name:RE450,product_ver:2.0.0,special_id:4A500000}\r\n"
2081 "{product_name:RE450,product_ver:2.0.0,special_id:43410000}\r\n"
2082 "{product_name:RE450,product_ver:2.0.0,special_id:41550000}\r\n"
2083 "{product_name:RE450,product_ver:2.0.0,special_id:41530000}\r\n"
2084 "{product_name:RE450,product_ver:2.0.0,special_id:4B520000}\r\n"
2085 "{product_name:RE450,product_ver:2.0.0,special_id:42520000}\r\n",
2086 .support_trail
= '\x00',
2089 /* We're using a dynamic kernel/rootfs split here */
2091 {"fs-uboot", 0x00000, 0x20000},
2092 {"firmware", 0x20000, 0x5e0000},
2093 {"partition-table", 0x600000, 0x02000},
2094 {"default-mac", 0x610000, 0x00020},
2095 {"pin", 0x610100, 0x00020},
2096 {"product-info", 0x611100, 0x01000},
2097 {"soft-version", 0x620000, 0x01000},
2098 {"support-list", 0x621000, 0x01000},
2099 {"profile", 0x622000, 0x08000},
2100 {"user-config", 0x630000, 0x10000},
2101 {"default-config", 0x640000, 0x10000},
2102 {"radio", 0x7f0000, 0x10000},
2106 .first_sysupgrade_partition
= "os-image",
2107 .last_sysupgrade_partition
= "file-system"
2110 /** Firmware layout for the RE450 v3 */
2116 "{product_name:RE450,product_ver:3.0.0,special_id:00000000}\r\n"
2117 "{product_name:RE450,product_ver:3.0.0,special_id:55530000}\r\n"
2118 "{product_name:RE450,product_ver:3.0.0,special_id:45550000}\r\n"
2119 "{product_name:RE450,product_ver:3.0.0,special_id:4A500000}\r\n"
2120 "{product_name:RE450,product_ver:3.0.0,special_id:43410000}\r\n"
2121 "{product_name:RE450,product_ver:3.0.0,special_id:41550000}\r\n"
2122 "{product_name:RE450,product_ver:3.0.0,special_id:41530000}\r\n"
2123 "{product_name:RE450,product_ver:3.0.0,special_id:4B520000}\r\n"
2124 "{product_name:RE450,product_ver:3.0.0,special_id:42520000}\r\n",
2125 .support_trail
= '\x00',
2128 /* We're using a dynamic kernel/rootfs split here */
2130 {"fs-uboot", 0x00000, 0x20000},
2131 {"default-mac", 0x20000, 0x00020},
2132 {"pin", 0x20020, 0x00020},
2133 {"product-info", 0x21000, 0x01000},
2134 {"partition-table", 0x22000, 0x02000},
2135 {"soft-version", 0x24000, 0x01000},
2136 {"support-list", 0x25000, 0x01000},
2137 {"profile", 0x26000, 0x08000},
2138 {"user-config", 0x2e000, 0x10000},
2139 {"default-config", 0x3e000, 0x10000},
2140 {"config-info", 0x4e000, 0x00400},
2141 {"firmware", 0x50000, 0x7a0000},
2142 {"radio", 0x7f0000, 0x10000},
2146 .first_sysupgrade_partition
= "os-image",
2147 .last_sysupgrade_partition
= "file-system"
2150 /** Firmware layout for the RE500 */
2156 "{product_name:RE500,product_ver:1.0.0,special_id:00000000}\r\n"
2157 "{product_name:RE500,product_ver:1.0.0,special_id:55530000}\r\n"
2158 "{product_name:RE500,product_ver:1.0.0,special_id:45550000}\r\n"
2159 "{product_name:RE500,product_ver:1.0.0,special_id:4A500000}\r\n"
2160 "{product_name:RE500,product_ver:1.0.0,special_id:43410000}\r\n"
2161 "{product_name:RE500,product_ver:1.0.0,special_id:41550000}\r\n"
2162 "{product_name:RE500,product_ver:1.0.0,special_id:41530000}\r\n",
2163 .support_trail
= '\x00',
2166 /* We're using a dynamic kernel/rootfs split here */
2168 {"fs-uboot", 0x00000, 0x20000},
2169 {"firmware", 0x20000, 0xde0000},
2170 {"partition-table", 0xe00000, 0x02000},
2171 {"default-mac", 0xe10000, 0x00020},
2172 {"pin", 0xe10100, 0x00020},
2173 {"product-info", 0xe11100, 0x01000},
2174 {"soft-version", 0xe20000, 0x01000},
2175 {"support-list", 0xe21000, 0x01000},
2176 {"profile", 0xe22000, 0x08000},
2177 {"user-config", 0xe30000, 0x10000},
2178 {"default-config", 0xe40000, 0x10000},
2179 {"radio", 0xff0000, 0x10000},
2183 .first_sysupgrade_partition
= "os-image",
2184 .last_sysupgrade_partition
= "file-system"
2187 /** Firmware layout for the RE650 */
2193 "{product_name:RE650,product_ver:1.0.0,special_id:00000000}\r\n"
2194 "{product_name:RE650,product_ver:1.0.0,special_id:55530000}\r\n"
2195 "{product_name:RE650,product_ver:1.0.0,special_id:45550000}\r\n"
2196 "{product_name:RE650,product_ver:1.0.0,special_id:4A500000}\r\n"
2197 "{product_name:RE650,product_ver:1.0.0,special_id:43410000}\r\n"
2198 "{product_name:RE650,product_ver:1.0.0,special_id:41550000}\r\n"
2199 "{product_name:RE650,product_ver:1.0.0,special_id:41530000}\r\n",
2200 .support_trail
= '\x00',
2203 /* We're using a dynamic kernel/rootfs split here */
2205 {"fs-uboot", 0x00000, 0x20000},
2206 {"firmware", 0x20000, 0xde0000},
2207 {"partition-table", 0xe00000, 0x02000},
2208 {"default-mac", 0xe10000, 0x00020},
2209 {"pin", 0xe10100, 0x00020},
2210 {"product-info", 0xe11100, 0x01000},
2211 {"soft-version", 0xe20000, 0x01000},
2212 {"support-list", 0xe21000, 0x01000},
2213 {"profile", 0xe22000, 0x08000},
2214 {"user-config", 0xe30000, 0x10000},
2215 {"default-config", 0xe40000, 0x10000},
2216 {"radio", 0xff0000, 0x10000},
2220 .first_sysupgrade_partition
= "os-image",
2221 .last_sysupgrade_partition
= "file-system"
2227 #define error(_ret, _errno, _str, ...) \
2229 fprintf(stderr, _str ": %s\n", ## __VA_ARGS__, \
2230 strerror(_errno)); \
2236 /** Stores a uint32 as big endian */
2237 static inline void put32(uint8_t *buf
, uint32_t val
) {
2244 /** Allocates a new image partition */
2245 static struct image_partition_entry
alloc_image_partition(const char *name
, size_t len
) {
2246 struct image_partition_entry entry
= {name
, len
, malloc(len
)};
2248 error(1, errno
, "malloc");
2253 /** Frees an image partition */
2254 static void free_image_partition(struct image_partition_entry entry
) {
2258 static time_t source_date_epoch
= -1;
2259 static void set_source_date_epoch() {
2260 char *env
= getenv("SOURCE_DATE_EPOCH");
2264 source_date_epoch
= strtoull(env
, &endptr
, 10);
2265 if (errno
|| (endptr
&& *endptr
!= '\0')) {
2266 fprintf(stderr
, "Invalid SOURCE_DATE_EPOCH");
2272 /** Generates the partition-table partition */
2273 static struct image_partition_entry
make_partition_table(const struct flash_partition_entry
*p
) {
2274 struct image_partition_entry entry
= alloc_image_partition("partition-table", 0x800);
2276 char *s
= (char *)entry
.data
, *end
= (char *)(s
+entry
.size
);
2284 for (i
= 0; p
[i
].name
; i
++) {
2286 size_t w
= snprintf(s
, len
, "partition %s base 0x%05x size 0x%05x\n", p
[i
].name
, p
[i
].base
, p
[i
].size
);
2289 error(1, 0, "flash partition table overflow?");
2296 memset(s
, 0xff, end
-s
);
2302 /** Generates a binary-coded decimal representation of an integer in the range [0, 99] */
2303 static inline uint8_t bcd(uint8_t v
) {
2304 return 0x10 * (v
/10) + v
%10;
2308 /** Generates the soft-version partition */
2309 static struct image_partition_entry
make_soft_version(struct device_info
*info
, uint32_t rev
) {
2310 size_t part_len
= sizeof(struct soft_version
);
2311 if (info
->soft_ver_compat_level
> 0)
2312 part_len
+= sizeof(uint32_t);
2314 struct image_partition_entry entry
=
2315 alloc_image_partition("soft-version", part_len
+1);
2316 struct soft_version
*s
= (struct soft_version
*)entry
.data
;
2320 if (source_date_epoch
!= -1)
2321 t
= source_date_epoch
;
2322 else if (time(&t
) == (time_t)(-1))
2323 error(1, errno
, "time");
2325 struct tm
*tm
= gmtime(&t
);
2327 /* Partition contents size, minus 8 byte header and trailing byte */
2328 s
->data_len
= htonl(entry
.size
-9);
2332 s
->version_major
= 0;
2333 s
->version_minor
= 0;
2334 s
->version_patch
= 0;
2336 s
->year_hi
= bcd((1900+tm
->tm_year
)/100);
2337 s
->year_lo
= bcd(tm
->tm_year
%100);
2338 s
->month
= bcd(tm
->tm_mon
+1);
2339 s
->day
= bcd(tm
->tm_mday
);
2340 s
->rev
= htonl(rev
);
2342 if (info
->soft_ver_compat_level
> 0)
2343 *(uint32_t *)(entry
.data
+ sizeof(struct soft_version
)) =
2344 htonl(info
->soft_ver_compat_level
);
2346 entry
.data
[entry
.size
-1] = 0xff;
2351 static struct image_partition_entry
make_soft_version_from_string(const char *soft_ver
) {
2352 /** String length _including_ the terminating zero byte */
2353 uint32_t ver_len
= strlen(soft_ver
) + 1;
2354 /** Partition contains 64 bit header, the version string, and one additional null byte */
2355 size_t partition_len
= 2*sizeof(uint32_t) + ver_len
+ 1;
2356 struct image_partition_entry entry
= alloc_image_partition("soft-version", partition_len
);
2358 uint32_t *len
= (uint32_t *)entry
.data
;
2359 len
[0] = htonl(ver_len
);
2361 memcpy(&len
[2], soft_ver
, ver_len
);
2363 entry
.data
[partition_len
- 1] = 0;
2368 /** Generates the support-list partition */
2369 static struct image_partition_entry
make_support_list(struct device_info
*info
) {
2370 size_t len
= strlen(info
->support_list
);
2371 struct image_partition_entry entry
= alloc_image_partition("support-list", len
+ 9);
2373 put32(entry
.data
, len
);
2374 memset(entry
.data
+4, 0, 4);
2375 memcpy(entry
.data
+8, info
->support_list
, len
);
2376 entry
.data
[len
+8] = info
->support_trail
;
2381 /** Creates a new image partition with an arbitrary name from a file */
2382 static struct image_partition_entry
read_file(const char *part_name
, const char *filename
, bool add_jffs2_eof
, struct flash_partition_entry
*file_system_partition
) {
2383 struct stat statbuf
;
2385 if (stat(filename
, &statbuf
) < 0)
2386 error(1, errno
, "unable to stat file `%s'", filename
);
2388 size_t len
= statbuf
.st_size
;
2390 if (add_jffs2_eof
) {
2391 if (file_system_partition
)
2392 len
= ALIGN(len
+ file_system_partition
->base
, 0x10000) + sizeof(jffs2_eof_mark
) - file_system_partition
->base
;
2394 len
= ALIGN(len
, 0x10000) + sizeof(jffs2_eof_mark
);
2397 struct image_partition_entry entry
= alloc_image_partition(part_name
, len
);
2399 FILE *file
= fopen(filename
, "rb");
2401 error(1, errno
, "unable to open file `%s'", filename
);
2403 if (fread(entry
.data
, statbuf
.st_size
, 1, file
) != 1)
2404 error(1, errno
, "unable to read file `%s'", filename
);
2406 if (add_jffs2_eof
) {
2407 uint8_t *eof
= entry
.data
+ statbuf
.st_size
, *end
= entry
.data
+entry
.size
;
2409 memset(eof
, 0xff, end
- eof
- sizeof(jffs2_eof_mark
));
2410 memcpy(end
- sizeof(jffs2_eof_mark
), jffs2_eof_mark
, sizeof(jffs2_eof_mark
));
2418 /** Creates a new image partition from arbitrary data */
2419 static struct image_partition_entry
put_data(const char *part_name
, const char *datain
, size_t len
) {
2421 struct image_partition_entry entry
= alloc_image_partition(part_name
, len
);
2423 memcpy(entry
.data
, datain
, len
);
2429 Copies a list of image partitions into an image buffer and generates the image partition table while doing so
2431 Example image partition table:
2433 fwup-ptn partition-table base 0x00800 size 0x00800
2434 fwup-ptn os-image base 0x01000 size 0x113b45
2435 fwup-ptn file-system base 0x114b45 size 0x1d0004
2436 fwup-ptn support-list base 0x2e4b49 size 0x000d1
2438 Each line of the partition table is terminated with the bytes 09 0d 0a ("\t\r\n"),
2439 the end of the partition table is marked with a zero byte.
2441 The firmware image must contain at least the partition-table and support-list partitions
2442 to be accepted. There aren't any alignment constraints for the image partitions.
2444 The partition-table partition contains the actual flash layout; partitions
2445 from the image partition table are mapped to the corresponding flash partitions during
2446 the firmware upgrade. The support-list partition contains a list of devices supported by
2449 The base offsets in the firmware partition table are relative to the end
2450 of the vendor information block, so the partition-table partition will
2451 actually start at offset 0x1814 of the image.
2453 I think partition-table must be the first partition in the firmware image.
2455 static void put_partitions(uint8_t *buffer
, const struct flash_partition_entry
*flash_parts
, const struct image_partition_entry
*parts
) {
2457 char *image_pt
= (char *)buffer
, *end
= image_pt
+ 0x800;
2459 size_t base
= 0x800;
2460 for (i
= 0; parts
[i
].name
; i
++) {
2461 for (j
= 0; flash_parts
[j
].name
; j
++) {
2462 if (!strcmp(flash_parts
[j
].name
, parts
[i
].name
)) {
2463 if (parts
[i
].size
> flash_parts
[j
].size
)
2464 error(1, 0, "%s partition too big (more than %u bytes)", flash_parts
[j
].name
, (unsigned)flash_parts
[j
].size
);
2469 assert(flash_parts
[j
].name
);
2471 memcpy(buffer
+ base
, parts
[i
].data
, parts
[i
].size
);
2473 size_t len
= end
-image_pt
;
2474 size_t w
= snprintf(image_pt
, len
, "fwup-ptn %s base 0x%05x size 0x%05x\t\r\n", parts
[i
].name
, (unsigned)base
, (unsigned)parts
[i
].size
);
2477 error(1, 0, "image partition table overflow?");
2481 base
+= parts
[i
].size
;
2485 /** Generates and writes the image MD5 checksum */
2486 static void put_md5(uint8_t *md5
, uint8_t *buffer
, unsigned int len
) {
2490 MD5_Update(&ctx
, md5_salt
, (unsigned int)sizeof(md5_salt
));
2491 MD5_Update(&ctx
, buffer
, len
);
2492 MD5_Final(md5
, &ctx
);
2497 Generates the firmware image in factory format
2503 0000-0003 Image size (4 bytes, big endian)
2504 0004-0013 MD5 hash (hash of a 16 byte salt and the image data starting with byte 0x14)
2505 0014-0017 Vendor information length (without padding) (4 bytes, big endian)
2506 0018-1013 Vendor information (4092 bytes, padded with 0xff; there seem to be older
2507 (VxWorks-based) TP-LINK devices which use a smaller vendor information block)
2508 1014-1813 Image partition table (2048 bytes, padded with 0xff)
2509 1814-xxxx Firmware partitions
2511 static void * generate_factory_image(struct device_info
*info
, const struct image_partition_entry
*parts
, size_t *len
) {
2515 for (i
= 0; parts
[i
].name
; i
++)
2516 *len
+= parts
[i
].size
;
2518 uint8_t *image
= malloc(*len
);
2520 error(1, errno
, "malloc");
2522 memset(image
, 0xff, *len
);
2526 size_t vendor_len
= strlen(info
->vendor
);
2527 put32(image
+0x14, vendor_len
);
2528 memcpy(image
+0x18, info
->vendor
, vendor_len
);
2531 put_partitions(image
+ 0x1014, info
->partitions
, parts
);
2532 put_md5(image
+0x04, image
+0x14, *len
-0x14);
2538 Generates the firmware image in sysupgrade format
2540 This makes some assumptions about the provided flash and image partition tables and
2541 should be generalized when TP-LINK starts building its safeloader into hardware with
2542 different flash layouts.
2544 static void * generate_sysupgrade_image(struct device_info
*info
, const struct image_partition_entry
*image_parts
, size_t *len
) {
2546 size_t flash_first_partition_index
= 0;
2547 size_t flash_last_partition_index
= 0;
2548 const struct flash_partition_entry
*flash_first_partition
= NULL
;
2549 const struct flash_partition_entry
*flash_last_partition
= NULL
;
2550 const struct image_partition_entry
*image_last_partition
= NULL
;
2552 /** Find first and last partitions */
2553 for (i
= 0; info
->partitions
[i
].name
; i
++) {
2554 if (!strcmp(info
->partitions
[i
].name
, info
->first_sysupgrade_partition
)) {
2555 flash_first_partition
= &info
->partitions
[i
];
2556 flash_first_partition_index
= i
;
2557 } else if (!strcmp(info
->partitions
[i
].name
, info
->last_sysupgrade_partition
)) {
2558 flash_last_partition
= &info
->partitions
[i
];
2559 flash_last_partition_index
= i
;
2563 assert(flash_first_partition
&& flash_last_partition
);
2564 assert(flash_first_partition_index
< flash_last_partition_index
);
2566 /** Find last partition from image to calculate needed size */
2567 for (i
= 0; image_parts
[i
].name
; i
++) {
2568 if (!strcmp(image_parts
[i
].name
, info
->last_sysupgrade_partition
)) {
2569 image_last_partition
= &image_parts
[i
];
2574 assert(image_last_partition
);
2576 *len
= flash_last_partition
->base
- flash_first_partition
->base
+ image_last_partition
->size
;
2578 uint8_t *image
= malloc(*len
);
2580 error(1, errno
, "malloc");
2582 memset(image
, 0xff, *len
);
2584 for (i
= flash_first_partition_index
; i
<= flash_last_partition_index
; i
++) {
2585 for (j
= 0; image_parts
[j
].name
; j
++) {
2586 if (!strcmp(info
->partitions
[i
].name
, image_parts
[j
].name
)) {
2587 if (image_parts
[j
].size
> info
->partitions
[i
].size
)
2588 error(1, 0, "%s partition too big (more than %u bytes)", info
->partitions
[i
].name
, (unsigned)info
->partitions
[i
].size
);
2589 memcpy(image
+ info
->partitions
[i
].base
- flash_first_partition
->base
, image_parts
[j
].data
, image_parts
[j
].size
);
2593 assert(image_parts
[j
].name
);
2600 /** Generates an image according to a given layout and writes it to a file */
2601 static void build_image(const char *output
,
2602 const char *kernel_image
,
2603 const char *rootfs_image
,
2607 struct device_info
*info
) {
2611 struct image_partition_entry parts
[7] = {};
2613 struct flash_partition_entry
*firmware_partition
= NULL
;
2614 struct flash_partition_entry
*os_image_partition
= NULL
;
2615 struct flash_partition_entry
*file_system_partition
= NULL
;
2616 size_t firmware_partition_index
= 0;
2618 for (i
= 0; info
->partitions
[i
].name
; i
++) {
2619 if (!strcmp(info
->partitions
[i
].name
, "firmware"))
2621 firmware_partition
= &info
->partitions
[i
];
2622 firmware_partition_index
= i
;
2626 if (firmware_partition
)
2628 os_image_partition
= &info
->partitions
[firmware_partition_index
];
2629 file_system_partition
= &info
->partitions
[firmware_partition_index
+ 1];
2632 if (stat(kernel_image
, &kernel
) < 0)
2633 error(1, errno
, "unable to stat file `%s'", kernel_image
);
2635 if (kernel
.st_size
> firmware_partition
->size
)
2636 error(1, 0, "kernel overflowed firmware partition\n");
2638 for (i
= MAX_PARTITIONS
-1; i
>= firmware_partition_index
+ 1; i
--)
2639 info
->partitions
[i
+1] = info
->partitions
[i
];
2641 file_system_partition
->name
= "file-system";
2642 file_system_partition
->base
= firmware_partition
->base
+ kernel
.st_size
;
2644 /* Align partition start to erase blocks for factory images only */
2646 file_system_partition
->base
= ALIGN(firmware_partition
->base
+ kernel
.st_size
, 0x10000);
2648 file_system_partition
->size
= firmware_partition
->size
- file_system_partition
->base
;
2650 os_image_partition
->name
= "os-image";
2651 os_image_partition
->size
= kernel
.st_size
;
2654 parts
[0] = make_partition_table(info
->partitions
);
2656 parts
[1] = make_soft_version_from_string(info
->soft_ver
);
2658 parts
[1] = make_soft_version(info
, rev
);
2660 parts
[2] = make_support_list(info
);
2661 parts
[3] = read_file("os-image", kernel_image
, false, NULL
);
2662 parts
[4] = read_file("file-system", rootfs_image
, add_jffs2_eof
, file_system_partition
);
2664 /* Some devices need the extra-para partition to accept the firmware */
2665 if (strcasecmp(info
->id
, "ARCHER-C2-V3") == 0 ||
2666 strcasecmp(info
->id
, "ARCHER-C25-V1") == 0 ||
2667 strcasecmp(info
->id
, "ARCHER-C59-V2") == 0 ||
2668 strcasecmp(info
->id
, "ARCHER-C60-V2") == 0 ||
2669 strcasecmp(info
->id
, "ARCHER-C60-V3") == 0 ||
2670 strcasecmp(info
->id
, "TLWR1043NV5") == 0) {
2671 const char mdat
[11] = {0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00};
2672 parts
[5] = put_data("extra-para", mdat
, 11);
2673 } else if (strcasecmp(info
->id
, "ARCHER-A7-V5") == 0 || strcasecmp(info
->id
, "ARCHER-C7-V4") == 0 || strcasecmp(info
->id
, "ARCHER-C7-V5") == 0) {
2674 const char mdat
[11] = {0x01, 0x00, 0x00, 0x02, 0x00, 0x00, 0xca, 0x00, 0x01, 0x00, 0x00};
2675 parts
[5] = put_data("extra-para", mdat
, 11);
2676 } else if (strcasecmp(info
->id
, "ARCHER-C6-V2") == 0) {
2677 const char mdat
[11] = {0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00};
2678 parts
[5] = put_data("extra-para", mdat
, 11);
2679 } else if (strcasecmp(info
->id
, "ARCHER-C6-V2-US") == 0) {
2680 const char mdat
[11] = {0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x00};
2681 parts
[5] = put_data("extra-para", mdat
, 11);
2682 } else if (strcasecmp(info
->id
, "EAP245-V3") == 0) {
2683 const char mdat
[10] = {0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01};
2684 parts
[5] = put_data("extra-para", mdat
, 10);
2690 image
= generate_sysupgrade_image(info
, parts
, &len
);
2692 image
= generate_factory_image(info
, parts
, &len
);
2694 FILE *file
= fopen(output
, "wb");
2696 error(1, errno
, "unable to open output file");
2698 if (fwrite(image
, len
, 1, file
) != 1)
2699 error(1, 0, "unable to write output file");
2705 for (i
= 0; parts
[i
].name
; i
++)
2706 free_image_partition(parts
[i
]);
2710 static void usage(const char *argv0
) {
2712 "Usage: %s [OPTIONS...]\n"
2715 " -h show this help\n"
2717 "Create a new image:\n"
2718 " -B <board> create image for the board specified with <board>\n"
2719 " -k <file> read kernel image from the file <file>\n"
2720 " -r <file> read rootfs image from the file <file>\n"
2721 " -o <file> write output to the file <file>\n"
2722 " -V <rev> sets the revision number to <rev>\n"
2723 " -j add jffs2 end-of-filesystem markers\n"
2724 " -S create sysupgrade instead of factory image\n"
2725 "Extract an old image:\n"
2726 " -x <file> extract all oem firmware partition\n"
2727 " -d <dir> destination to extract the firmware partition\n"
2728 " -z <file> convert an oem firmware into a sysupgade file. Use -o for output file\n",
2734 static struct device_info
*find_board(const char *id
)
2736 struct device_info
*board
= NULL
;
2738 for (board
= boards
; board
->id
!= NULL
; board
++)
2739 if (strcasecmp(id
, board
->id
) == 0)
2745 static int add_flash_partition(
2746 struct flash_partition_entry
*part_list
,
2753 /* check if the list has a free entry */
2754 for (ptr
= 0; ptr
< max_entries
; ptr
++, part_list
++) {
2755 if (part_list
->name
== NULL
&&
2756 part_list
->base
== 0 &&
2757 part_list
->size
== 0)
2761 if (ptr
== max_entries
) {
2762 error(1, 0, "No free flash part entry available.");
2765 part_list
->name
= calloc(1, strlen(name
) + 1);
2766 if (!part_list
->name
) {
2767 error(1, 0, "Unable to allocate memory");
2770 memcpy((char *)part_list
->name
, name
, strlen(name
));
2771 part_list
->base
= base
;
2772 part_list
->size
= size
;
2777 /** read the partition table into struct flash_partition_entry */
2778 static int read_partition_table(
2779 FILE *file
, long offset
,
2780 struct flash_partition_entry
*entries
, size_t max_entries
,
2785 const char *parthdr
= NULL
;
2786 const char *fwuphdr
= "fwup-ptn";
2787 const char *flashhdr
= "partition";
2789 /* TODO: search for the partition table */
2799 error(1, 0, "Invalid partition table");
2802 if (fseek(file
, offset
, SEEK_SET
) < 0)
2803 error(1, errno
, "Can not seek in the firmware");
2805 if (fread(buf
, 2048, 1, file
) != 1)
2806 error(1, errno
, "Can not read fwup-ptn from the firmware");
2810 /* look for the partition header */
2811 if (memcmp(buf
, parthdr
, strlen(parthdr
)) != 0) {
2812 fprintf(stderr
, "DEBUG: can not find fwuphdr\n");
2817 end
= buf
+ sizeof(buf
);
2818 while ((ptr
+ strlen(parthdr
)) < end
&&
2819 memcmp(ptr
, parthdr
, strlen(parthdr
)) == 0) {
2823 char name
[32] = { 0 };
2825 unsigned long base
= 0;
2826 unsigned long size
= 0;
2828 end_part
= memchr(ptr
, '\n', (end
- ptr
));
2829 if (end_part
== NULL
) {
2830 /* in theory this should never happen, because a partition always ends with 0x09, 0x0D, 0x0A */
2834 for (int i
= 0; i
<= 4; i
++) {
2835 if (end_part
<= ptr
)
2838 end_element
= memchr(ptr
, 0x20, (end_part
- ptr
));
2839 if (end_element
== NULL
) {
2840 error(1, errno
, "Ignoring the rest of the partition entries.");
2845 /* partition header */
2847 ptr
= end_element
+ 1;
2851 name_len
= (end_element
- ptr
) > 31 ? 31 : (end_element
- ptr
);
2852 strncpy(name
, ptr
, name_len
);
2853 name
[name_len
] = '\0';
2854 ptr
= end_element
+ 1;
2859 ptr
= end_element
+ 1;
2864 base
= strtoul(ptr
, NULL
, 16);
2865 ptr
= end_element
+ 1;
2870 ptr
= end_element
+ 1;
2871 /* actual size. The last element doesn't have a sepeartor */
2872 size
= strtoul(ptr
, NULL
, 16);
2873 /* the part ends with 0x09, 0x0d, 0x0a */
2875 add_flash_partition(entries
, max_entries
, name
, base
, size
);
2884 static void write_partition(
2886 size_t firmware_offset
,
2887 struct flash_partition_entry
*entry
,
2893 fseek(input_file
, entry
->base
+ firmware_offset
, SEEK_SET
);
2895 for (offset
= 0; sizeof(buf
) + offset
<= entry
->size
; offset
+= sizeof(buf
)) {
2896 if (fread(buf
, sizeof(buf
), 1, input_file
) != 1)
2897 error(1, errno
, "Can not read partition from input_file");
2899 if (fwrite(buf
, sizeof(buf
), 1, output_file
) != 1)
2900 error(1, errno
, "Can not write partition to output_file");
2902 /* write last chunk smaller than buffer */
2903 if (offset
< entry
->size
) {
2904 offset
= entry
->size
- offset
;
2905 if (fread(buf
, offset
, 1, input_file
) != 1)
2906 error(1, errno
, "Can not read partition from input_file");
2907 if (fwrite(buf
, offset
, 1, output_file
) != 1)
2908 error(1, errno
, "Can not write partition to output_file");
2912 static int extract_firmware_partition(FILE *input_file
, size_t firmware_offset
, struct flash_partition_entry
*entry
, const char *output_directory
)
2915 char output
[PATH_MAX
];
2917 snprintf(output
, PATH_MAX
, "%s/%s", output_directory
, entry
->name
);
2918 output_file
= fopen(output
, "wb+");
2919 if (output_file
== NULL
) {
2920 error(1, errno
, "Can not open output file %s", output
);
2923 write_partition(input_file
, firmware_offset
, entry
, output_file
);
2925 fclose(output_file
);
2930 /** extract all partitions from the firmware file */
2931 static int extract_firmware(const char *input
, const char *output_directory
)
2933 struct flash_partition_entry entries
[16] = { 0 };
2934 size_t max_entries
= 16;
2935 size_t firmware_offset
= 0x1014;
2938 struct stat statbuf
;
2940 /* check input file */
2941 if (stat(input
, &statbuf
)) {
2942 error(1, errno
, "Can not read input firmware %s", input
);
2945 /* check if output directory exists */
2946 if (stat(output_directory
, &statbuf
)) {
2947 error(1, errno
, "Failed to stat output directory %s", output_directory
);
2950 if ((statbuf
.st_mode
& S_IFMT
) != S_IFDIR
) {
2951 error(1, errno
, "Given output directory is not a directory %s", output_directory
);
2954 input_file
= fopen(input
, "rb");
2956 if (read_partition_table(input_file
, firmware_offset
, entries
, 16, 0) != 0) {
2957 error(1, 0, "Error can not read the partition table (fwup-ptn)");
2960 for (size_t i
= 0; i
< max_entries
; i
++) {
2961 if (entries
[i
].name
== NULL
&&
2962 entries
[i
].base
== 0 &&
2963 entries
[i
].size
== 0)
2966 extract_firmware_partition(input_file
, firmware_offset
, &entries
[i
], output_directory
);
2972 static struct flash_partition_entry
*find_partition(
2973 struct flash_partition_entry
*entries
, size_t max_entries
,
2974 const char *name
, const char *error_msg
)
2976 for (size_t i
= 0; i
< max_entries
; i
++, entries
++) {
2977 if (strcmp(entries
->name
, name
) == 0)
2981 error(1, 0, "%s", error_msg
);
2985 static void write_ff(FILE *output_file
, size_t size
)
2990 memset(buf
, 0xff, sizeof(buf
));
2992 for (offset
= 0; offset
+ sizeof(buf
) < size
; offset
+= sizeof(buf
)) {
2993 if (fwrite(buf
, sizeof(buf
), 1, output_file
) != 1)
2994 error(1, errno
, "Can not write 0xff to output_file");
2997 /* write last chunk smaller than buffer */
2998 if (offset
< size
) {
2999 offset
= size
- offset
;
3000 if (fwrite(buf
, offset
, 1, output_file
) != 1)
3001 error(1, errno
, "Can not write partition to output_file");
3005 static void convert_firmware(const char *input
, const char *output
)
3007 struct flash_partition_entry fwup
[MAX_PARTITIONS
] = { 0 };
3008 struct flash_partition_entry flash
[MAX_PARTITIONS
] = { 0 };
3009 struct flash_partition_entry
*fwup_os_image
= NULL
, *fwup_file_system
= NULL
;
3010 struct flash_partition_entry
*flash_os_image
= NULL
, *flash_file_system
= NULL
;
3011 struct flash_partition_entry
*fwup_partition_table
= NULL
;
3012 size_t firmware_offset
= 0x1014;
3013 FILE *input_file
, *output_file
;
3015 struct stat statbuf
;
3017 /* check input file */
3018 if (stat(input
, &statbuf
)) {
3019 error(1, errno
, "Can not read input firmware %s", input
);
3022 input_file
= fopen(input
, "rb");
3024 error(1, 0, "Can not open input firmware %s", input
);
3026 output_file
= fopen(output
, "wb");
3028 error(1, 0, "Can not open output firmware %s", output
);
3030 if (read_partition_table(input_file
, firmware_offset
, fwup
, MAX_PARTITIONS
, 0) != 0) {
3031 error(1, 0, "Error can not read the partition table (fwup-ptn)");
3034 fwup_os_image
= find_partition(fwup
, MAX_PARTITIONS
,
3035 "os-image", "Error can not find os-image partition (fwup)");
3036 fwup_file_system
= find_partition(fwup
, MAX_PARTITIONS
,
3037 "file-system", "Error can not find file-system partition (fwup)");
3038 fwup_partition_table
= find_partition(fwup
, MAX_PARTITIONS
,
3039 "partition-table", "Error can not find partition-table partition");
3041 /* the flash partition table has a 0x00000004 magic haeder */
3042 if (read_partition_table(input_file
, firmware_offset
+ fwup_partition_table
->base
+ 4, flash
, MAX_PARTITIONS
, 1) != 0)
3043 error(1, 0, "Error can not read the partition table (flash)");
3045 flash_os_image
= find_partition(flash
, MAX_PARTITIONS
,
3046 "os-image", "Error can not find os-image partition (flash)");
3047 flash_file_system
= find_partition(flash
, MAX_PARTITIONS
,
3048 "file-system", "Error can not find file-system partition (flash)");
3050 /* write os_image to 0x0 */
3051 write_partition(input_file
, firmware_offset
, fwup_os_image
, output_file
);
3052 write_ff(output_file
, flash_os_image
->size
- fwup_os_image
->size
);
3054 /* write file-system behind os_image */
3055 fseek(output_file
, flash_file_system
->base
- flash_os_image
->base
, SEEK_SET
);
3056 write_partition(input_file
, firmware_offset
, fwup_file_system
, output_file
);
3057 write_ff(output_file
, flash_file_system
->size
- fwup_file_system
->size
);
3059 fclose(output_file
);
3063 int main(int argc
, char *argv
[]) {
3064 const char *board
= NULL
, *kernel_image
= NULL
, *rootfs_image
= NULL
, *output
= NULL
;
3065 const char *extract_image
= NULL
, *output_directory
= NULL
, *convert_image
= NULL
;
3066 bool add_jffs2_eof
= false, sysupgrade
= false;
3068 struct device_info
*info
;
3069 set_source_date_epoch();
3074 c
= getopt(argc
, argv
, "B:k:r:o:V:jSh:x:d:z:");
3084 kernel_image
= optarg
;
3088 rootfs_image
= optarg
;
3096 sscanf(optarg
, "r%u", &rev
);
3100 add_jffs2_eof
= true;
3112 output_directory
= optarg
;
3116 extract_image
= optarg
;
3120 convert_image
= optarg
;
3129 if (extract_image
|| output_directory
) {
3131 error(1, 0, "No factory/oem image given via -x <file>. Output directory is only valid with -x");
3132 if (!output_directory
)
3133 error(1, 0, "Can not extract an image without output directory. Use -d <dir>");
3134 extract_firmware(extract_image
, output_directory
);
3135 } else if (convert_image
) {
3137 error(1, 0, "Can not convert a factory/oem image into sysupgrade image without output file. Use -o <file>");
3138 convert_firmware(convert_image
, output
);
3141 error(1, 0, "no board has been specified");
3143 error(1, 0, "no kernel image has been specified");
3145 error(1, 0, "no rootfs image has been specified");
3147 error(1, 0, "no output filename has been specified");
3149 info
= find_board(board
);
3152 error(1, 0, "unsupported board %s", board
);
3154 build_image(output
, kernel_image
, rootfs_image
, rev
, add_jffs2_eof
, sysupgrade
, info
);