2 Copyright (c) 2014, Matthias Schiffer <mschiffer@universe-factory.net>
5 Redistribution and use in source and binary forms, with or without
6 modification, are permitted provided that the following conditions are met:
8 1. Redistributions of source code must retain the above copyright notice,
9 this list of conditions and the following disclaimer.
10 2. Redistributions in binary form must reproduce the above copyright notice,
11 this list of conditions and the following disclaimer in the documentation
12 and/or other materials provided with the distribution.
14 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
15 AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16 IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
17 DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
18 FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19 DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
20 SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
21 CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
22 OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
23 OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
30 Image generation tool for the TP-LINK SafeLoader as seen on
31 TP-LINK Pharos devices (CPE210/220/510/520)
45 #include <arpa/inet.h>
47 #include <sys/types.h>
54 #define ALIGN(x,a) ({ typeof(a) __a = (a); (((x) + __a - 1) & ~(__a - 1)); })
57 #define MAX_PARTITIONS 32
59 /** An image partition table entry */
60 struct image_partition_entry
{
66 /** A flash partition table entry */
67 struct flash_partition_entry
{
73 /** Firmware layout description */
77 const char *support_list
;
80 struct flash_partition_entry partitions
[MAX_PARTITIONS
+1];
81 const char *first_sysupgrade_partition
;
82 const char *last_sysupgrade_partition
;
85 /** The content of the soft-version structure */
86 struct __attribute__((__packed__
)) soft_version
{
90 uint8_t version_major
;
91 uint8_t version_minor
;
92 uint8_t version_patch
;
102 static const uint8_t jffs2_eof_mark
[4] = {0xde, 0xad, 0xc0, 0xde};
106 Salt for the MD5 hash
108 Fortunately, TP-LINK seems to use the same salt for most devices which use
109 the new image format.
111 static const uint8_t md5_salt
[16] = {
112 0x7a, 0x2b, 0x15, 0xed,
113 0x9b, 0x98, 0x59, 0x6d,
114 0xe5, 0x04, 0xab, 0x44,
115 0xac, 0x2a, 0x9f, 0x4e,
119 /** Firmware layout table */
120 static struct device_info boards
[] = {
121 /** Firmware layout for the CPE210/220 V1 */
124 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
127 "CPE210(TP-LINK|UN|N300-2):1.0\r\n"
128 "CPE210(TP-LINK|UN|N300-2):1.1\r\n"
129 "CPE210(TP-LINK|US|N300-2):1.1\r\n"
130 "CPE210(TP-LINK|EU|N300-2):1.1\r\n"
131 "CPE220(TP-LINK|UN|N300-2):1.1\r\n"
132 "CPE220(TP-LINK|US|N300-2):1.1\r\n"
133 "CPE220(TP-LINK|EU|N300-2):1.1\r\n",
134 .support_trail
= '\xff',
138 {"fs-uboot", 0x00000, 0x20000},
139 {"partition-table", 0x20000, 0x02000},
140 {"default-mac", 0x30000, 0x00020},
141 {"product-info", 0x31100, 0x00100},
142 {"signature", 0x32000, 0x00400},
143 {"os-image", 0x40000, 0x200000},
144 {"file-system", 0x240000, 0x570000},
145 {"soft-version", 0x7b0000, 0x00100},
146 {"support-list", 0x7b1000, 0x00400},
147 {"user-config", 0x7c0000, 0x10000},
148 {"default-config", 0x7d0000, 0x10000},
149 {"log", 0x7e0000, 0x10000},
150 {"radio", 0x7f0000, 0x10000},
154 .first_sysupgrade_partition
= "os-image",
155 .last_sysupgrade_partition
= "support-list",
158 /** Firmware layout for the CPE210 V2 */
161 .vendor
= "CPE210(TP-LINK|UN|N300-2|00000000):2.0\r\n",
164 "CPE210(TP-LINK|EU|N300-2|00000000):2.0\r\n"
165 "CPE210(TP-LINK|EU|N300-2|45550000):2.0\r\n"
166 "CPE210(TP-LINK|EU|N300-2|55530000):2.0\r\n"
167 "CPE210(TP-LINK|UN|N300-2|00000000):2.0\r\n"
168 "CPE210(TP-LINK|UN|N300-2|45550000):2.0\r\n"
169 "CPE210(TP-LINK|UN|N300-2|55530000):2.0\r\n"
170 "CPE210(TP-LINK|US|N300-2|55530000):2.0\r\n"
171 "CPE210(TP-LINK|UN|N300-2):2.0\r\n"
172 "CPE210(TP-LINK|EU|N300-2):2.0\r\n"
173 "CPE210(TP-LINK|US|N300-2):2.0\r\n",
174 .support_trail
= '\xff',
178 {"fs-uboot", 0x00000, 0x20000},
179 {"partition-table", 0x20000, 0x02000},
180 {"default-mac", 0x30000, 0x00020},
181 {"product-info", 0x31100, 0x00100},
182 {"device-info", 0x31400, 0x00400},
183 {"signature", 0x32000, 0x00400},
184 {"device-id", 0x33000, 0x00100},
185 {"firmware", 0x40000, 0x770000},
186 {"soft-version", 0x7b0000, 0x00100},
187 {"support-list", 0x7b1000, 0x01000},
188 {"user-config", 0x7c0000, 0x10000},
189 {"default-config", 0x7d0000, 0x10000},
190 {"log", 0x7e0000, 0x10000},
191 {"radio", 0x7f0000, 0x10000},
195 .first_sysupgrade_partition
= "os-image",
196 .last_sysupgrade_partition
= "support-list",
199 /** Firmware layout for the CPE210 V3 */
202 .vendor
= "CPE210(TP-LINK|UN|N300-2|00000000):3.0\r\n",
205 "CPE210(TP-LINK|EU|N300-2|45550000):3.0\r\n"
206 "CPE210(TP-LINK|UN|N300-2|00000000):3.0\r\n"
207 "CPE210(TP-LINK|UN|N300-2):3.0\r\n"
208 "CPE210(TP-LINK|EU|N300-2):3.0\r\n",
209 .support_trail
= '\xff',
213 {"fs-uboot", 0x00000, 0x20000},
214 {"partition-table", 0x20000, 0x01000},
215 {"default-mac", 0x30000, 0x00020},
216 {"product-info", 0x31100, 0x00100},
217 {"device-info", 0x31400, 0x00400},
218 {"signature", 0x32000, 0x00400},
219 {"device-id", 0x33000, 0x00100},
220 {"firmware", 0x40000, 0x770000},
221 {"soft-version", 0x7b0000, 0x00100},
222 {"support-list", 0x7b1000, 0x01000},
223 {"user-config", 0x7c0000, 0x10000},
224 {"default-config", 0x7d0000, 0x10000},
225 {"log", 0x7e0000, 0x10000},
226 {"radio", 0x7f0000, 0x10000},
230 .first_sysupgrade_partition
= "os-image",
231 .last_sysupgrade_partition
= "support-list",
234 /** Firmware layout for the CPE220 V2 */
237 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
240 "CPE220(TP-LINK|EU|N300-2|00000000):2.0\r\n"
241 "CPE220(TP-LINK|EU|N300-2|45550000):2.0\r\n"
242 "CPE220(TP-LINK|EU|N300-2|55530000):2.0\r\n"
243 "CPE220(TP-LINK|UN|N300-2|00000000):2.0\r\n"
244 "CPE220(TP-LINK|UN|N300-2|45550000):2.0\r\n"
245 "CPE220(TP-LINK|UN|N300-2|55530000):2.0\r\n"
246 "CPE220(TP-LINK|US|N300-2|55530000):2.0\r\n"
247 "CPE220(TP-LINK|UN|N300-2):2.0\r\n"
248 "CPE220(TP-LINK|EU|N300-2):2.0\r\n"
249 "CPE220(TP-LINK|US|N300-2):2.0\r\n",
250 .support_trail
= '\xff',
254 {"fs-uboot", 0x00000, 0x20000},
255 {"partition-table", 0x20000, 0x02000},
256 {"default-mac", 0x30000, 0x00020},
257 {"product-info", 0x31100, 0x00100},
258 {"signature", 0x32000, 0x00400},
259 {"os-image", 0x40000, 0x200000},
260 {"file-system", 0x240000, 0x570000},
261 {"soft-version", 0x7b0000, 0x00100},
262 {"support-list", 0x7b1000, 0x00400},
263 {"user-config", 0x7c0000, 0x10000},
264 {"default-config", 0x7d0000, 0x10000},
265 {"log", 0x7e0000, 0x10000},
266 {"radio", 0x7f0000, 0x10000},
270 .first_sysupgrade_partition
= "os-image",
271 .last_sysupgrade_partition
= "support-list",
274 /** Firmware layout for the CPE220 V3 */
277 .vendor
= "CPE220(TP-LINK|UN|N300-2|00000000):3.0\r\n",
280 "CPE220(TP-LINK|EU|N300-2|00000000):3.0\r\n"
281 "CPE220(TP-LINK|EU|N300-2|45550000):3.0\r\n"
282 "CPE220(TP-LINK|EU|N300-2|55530000):3.0\r\n"
283 "CPE220(TP-LINK|UN|N300-2|00000000):3.0\r\n"
284 "CPE220(TP-LINK|UN|N300-2|45550000):3.0\r\n"
285 "CPE220(TP-LINK|UN|N300-2|55530000):3.0\r\n"
286 "CPE220(TP-LINK|US|N300-2|55530000):3.0\r\n"
287 "CPE220(TP-LINK|UN|N300-2):3.0\r\n"
288 "CPE220(TP-LINK|EU|N300-2):3.0\r\n"
289 "CPE220(TP-LINK|US|N300-2):3.0\r\n",
290 .support_trail
= '\xff',
294 {"fs-uboot", 0x00000, 0x20000},
295 {"partition-table", 0x20000, 0x02000},
296 {"default-mac", 0x30000, 0x00020},
297 {"product-info", 0x31100, 0x00100},
298 {"device-info", 0x31400, 0x00400},
299 {"signature", 0x32000, 0x00400},
300 {"device-id", 0x33000, 0x00100},
301 {"firmware", 0x40000, 0x770000},
302 {"soft-version", 0x7b0000, 0x00100},
303 {"support-list", 0x7b1000, 0x01000},
304 {"user-config", 0x7c0000, 0x10000},
305 {"default-config", 0x7d0000, 0x10000},
306 {"log", 0x7e0000, 0x10000},
307 {"radio", 0x7f0000, 0x10000},
311 .first_sysupgrade_partition
= "os-image",
312 .last_sysupgrade_partition
= "support-list",
315 /** Firmware layout for the CPE510/520 V1 */
318 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
321 "CPE510(TP-LINK|UN|N300-5):1.0\r\n"
322 "CPE510(TP-LINK|UN|N300-5):1.1\r\n"
323 "CPE510(TP-LINK|UN|N300-5):1.1\r\n"
324 "CPE510(TP-LINK|US|N300-5):1.1\r\n"
325 "CPE510(TP-LINK|EU|N300-5):1.1\r\n"
326 "CPE520(TP-LINK|UN|N300-5):1.1\r\n"
327 "CPE520(TP-LINK|US|N300-5):1.1\r\n"
328 "CPE520(TP-LINK|EU|N300-5):1.1\r\n",
329 .support_trail
= '\xff',
333 {"fs-uboot", 0x00000, 0x20000},
334 {"partition-table", 0x20000, 0x02000},
335 {"default-mac", 0x30000, 0x00020},
336 {"product-info", 0x31100, 0x00100},
337 {"signature", 0x32000, 0x00400},
338 {"os-image", 0x40000, 0x200000},
339 {"file-system", 0x240000, 0x570000},
340 {"soft-version", 0x7b0000, 0x00100},
341 {"support-list", 0x7b1000, 0x00400},
342 {"user-config", 0x7c0000, 0x10000},
343 {"default-config", 0x7d0000, 0x10000},
344 {"log", 0x7e0000, 0x10000},
345 {"radio", 0x7f0000, 0x10000},
349 .first_sysupgrade_partition
= "os-image",
350 .last_sysupgrade_partition
= "support-list",
353 /** Firmware layout for the CPE510 V2 */
356 .vendor
= "CPE510(TP-LINK|UN|N300-5):2.0\r\n",
359 "CPE510(TP-LINK|EU|N300-5|00000000):2.0\r\n"
360 "CPE510(TP-LINK|EU|N300-5|45550000):2.0\r\n"
361 "CPE510(TP-LINK|EU|N300-5|55530000):2.0\r\n"
362 "CPE510(TP-LINK|UN|N300-5|00000000):2.0\r\n"
363 "CPE510(TP-LINK|UN|N300-5|45550000):2.0\r\n"
364 "CPE510(TP-LINK|UN|N300-5|55530000):2.0\r\n"
365 "CPE510(TP-LINK|US|N300-5|00000000):2.0\r\n"
366 "CPE510(TP-LINK|US|N300-5|45550000):2.0\r\n"
367 "CPE510(TP-LINK|US|N300-5|55530000):2.0\r\n"
368 "CPE510(TP-LINK|UN|N300-5):2.0\r\n"
369 "CPE510(TP-LINK|EU|N300-5):2.0\r\n"
370 "CPE510(TP-LINK|US|N300-5):2.0\r\n",
371 .support_trail
= '\xff',
375 {"fs-uboot", 0x00000, 0x20000},
376 {"partition-table", 0x20000, 0x02000},
377 {"default-mac", 0x30000, 0x00020},
378 {"product-info", 0x31100, 0x00100},
379 {"signature", 0x32000, 0x00400},
380 {"os-image", 0x40000, 0x200000},
381 {"file-system", 0x240000, 0x570000},
382 {"soft-version", 0x7b0000, 0x00100},
383 {"support-list", 0x7b1000, 0x00400},
384 {"user-config", 0x7c0000, 0x10000},
385 {"default-config", 0x7d0000, 0x10000},
386 {"log", 0x7e0000, 0x10000},
387 {"radio", 0x7f0000, 0x10000},
391 .first_sysupgrade_partition
= "os-image",
392 .last_sysupgrade_partition
= "support-list",
395 /** Firmware layout for the CPE510 V3 */
398 .vendor
= "CPE510(TP-LINK|UN|N300-5):3.0\r\n",
401 "CPE510(TP-LINK|EU|N300-5|00000000):3.0\r\n"
402 "CPE510(TP-LINK|EU|N300-5|45550000):3.0\r\n"
403 "CPE510(TP-LINK|EU|N300-5|55530000):3.0\r\n"
404 "CPE510(TP-LINK|UN|N300-5|00000000):3.0\r\n"
405 "CPE510(TP-LINK|UN|N300-5|45550000):3.0\r\n"
406 "CPE510(TP-LINK|UN|N300-5|55530000):3.0\r\n"
407 "CPE510(TP-LINK|US|N300-5|00000000):3.0\r\n"
408 "CPE510(TP-LINK|US|N300-5|45550000):3.0\r\n"
409 "CPE510(TP-LINK|US|N300-5|55530000):3.0\r\n"
410 "CPE510(TP-LINK|UN|N300-5):3.0\r\n"
411 "CPE510(TP-LINK|EU|N300-5):3.0\r\n"
412 "CPE510(TP-LINK|US|N300-5):3.0\r\n",
413 .support_trail
= '\xff',
417 {"fs-uboot", 0x00000, 0x20000},
418 {"partition-table", 0x20000, 0x02000},
419 {"default-mac", 0x30000, 0x00020},
420 {"product-info", 0x31100, 0x00100},
421 {"signature", 0x32000, 0x00400},
422 {"os-image", 0x40000, 0x200000},
423 {"file-system", 0x240000, 0x570000},
424 {"soft-version", 0x7b0000, 0x00100},
425 {"support-list", 0x7b1000, 0x00400},
426 {"user-config", 0x7c0000, 0x10000},
427 {"default-config", 0x7d0000, 0x10000},
428 {"log", 0x7e0000, 0x10000},
429 {"radio", 0x7f0000, 0x10000},
433 .first_sysupgrade_partition
= "os-image",
434 .last_sysupgrade_partition
= "support-list",
437 /** Firmware layout for the CPE610V1 */
440 .vendor
= "CPE610(TP-LINK|UN|N300-5|00000000):1.0\r\n",
443 "CPE610(TP-LINK|EU|N300-5|00000000):1.0\r\n"
444 "CPE610(TP-LINK|EU|N300-5|45550000):1.0\r\n"
445 "CPE610(TP-LINK|EU|N300-5|55530000):1.0\r\n"
446 "CPE610(TP-LINK|UN|N300-5|00000000):1.0\r\n"
447 "CPE610(TP-LINK|UN|N300-5|45550000):1.0\r\n"
448 "CPE610(TP-LINK|UN|N300-5|55530000):1.0\r\n"
449 "CPE610(TP-LINK|US|N300-5|55530000):1.0\r\n"
450 "CPE610(TP-LINK|UN|N300-5):1.0\r\n"
451 "CPE610(TP-LINK|EU|N300-5):1.0\r\n"
452 "CPE610(TP-LINK|US|N300-5):1.0\r\n",
453 .support_trail
= '\xff',
457 {"fs-uboot", 0x00000, 0x20000},
458 {"partition-table", 0x20000, 0x02000},
459 {"default-mac", 0x30000, 0x00020},
460 {"product-info", 0x31100, 0x00100},
461 {"signature", 0x32000, 0x00400},
462 {"os-image", 0x40000, 0x200000},
463 {"file-system", 0x240000, 0x570000},
464 {"soft-version", 0x7b0000, 0x00100},
465 {"support-list", 0x7b1000, 0x00400},
466 {"user-config", 0x7c0000, 0x10000},
467 {"default-config", 0x7d0000, 0x10000},
468 {"log", 0x7e0000, 0x10000},
469 {"radio", 0x7f0000, 0x10000},
473 .first_sysupgrade_partition
= "os-image",
474 .last_sysupgrade_partition
= "support-list",
479 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
482 "WBS210(TP-LINK|UN|N300-2):1.20\r\n"
483 "WBS210(TP-LINK|US|N300-2):1.20\r\n"
484 "WBS210(TP-LINK|EU|N300-2):1.20\r\n",
485 .support_trail
= '\xff',
489 {"fs-uboot", 0x00000, 0x20000},
490 {"partition-table", 0x20000, 0x02000},
491 {"default-mac", 0x30000, 0x00020},
492 {"product-info", 0x31100, 0x00100},
493 {"signature", 0x32000, 0x00400},
494 {"os-image", 0x40000, 0x200000},
495 {"file-system", 0x240000, 0x570000},
496 {"soft-version", 0x7b0000, 0x00100},
497 {"support-list", 0x7b1000, 0x00400},
498 {"user-config", 0x7c0000, 0x10000},
499 {"default-config", 0x7d0000, 0x10000},
500 {"log", 0x7e0000, 0x10000},
501 {"radio", 0x7f0000, 0x10000},
505 .first_sysupgrade_partition
= "os-image",
506 .last_sysupgrade_partition
= "support-list",
511 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
514 "WBS210(TP-LINK|UN|N300-2|00000000):2.0\r\n"
515 "WBS210(TP-LINK|US|N300-2|55530000):2.0\r\n"
516 "WBS210(TP-LINK|EU|N300-2|45550000):2.0\r\n",
517 .support_trail
= '\xff',
521 {"fs-uboot", 0x00000, 0x20000},
522 {"partition-table", 0x20000, 0x02000},
523 {"default-mac", 0x30000, 0x00020},
524 {"product-info", 0x31100, 0x00100},
525 {"signature", 0x32000, 0x00400},
526 {"os-image", 0x40000, 0x200000},
527 {"file-system", 0x240000, 0x570000},
528 {"soft-version", 0x7b0000, 0x00100},
529 {"support-list", 0x7b1000, 0x00400},
530 {"user-config", 0x7c0000, 0x10000},
531 {"default-config", 0x7d0000, 0x10000},
532 {"log", 0x7e0000, 0x10000},
533 {"radio", 0x7f0000, 0x10000},
537 .first_sysupgrade_partition
= "os-image",
538 .last_sysupgrade_partition
= "support-list",
543 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
546 "WBS510(TP-LINK|UN|N300-5):1.20\r\n"
547 "WBS510(TP-LINK|US|N300-5):1.20\r\n"
548 "WBS510(TP-LINK|EU|N300-5):1.20\r\n"
549 "WBS510(TP-LINK|CA|N300-5):1.20\r\n",
550 .support_trail
= '\xff',
554 {"fs-uboot", 0x00000, 0x20000},
555 {"partition-table", 0x20000, 0x02000},
556 {"default-mac", 0x30000, 0x00020},
557 {"product-info", 0x31100, 0x00100},
558 {"signature", 0x32000, 0x00400},
559 {"os-image", 0x40000, 0x200000},
560 {"file-system", 0x240000, 0x570000},
561 {"soft-version", 0x7b0000, 0x00100},
562 {"support-list", 0x7b1000, 0x00400},
563 {"user-config", 0x7c0000, 0x10000},
564 {"default-config", 0x7d0000, 0x10000},
565 {"log", 0x7e0000, 0x10000},
566 {"radio", 0x7f0000, 0x10000},
570 .first_sysupgrade_partition
= "os-image",
571 .last_sysupgrade_partition
= "support-list",
576 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
579 "WBS510(TP-LINK|UN|N300-5|00000000):2.0\r\n"
580 "WBS510(TP-LINK|US|N300-5|55530000):2.0\r\n"
581 "WBS510(TP-LINK|EU|N300-5|45550000):2.0\r\n"
582 "WBS510(TP-LINK|CA|N300-5|43410000):2.0\r\n",
583 .support_trail
= '\xff',
587 {"fs-uboot", 0x00000, 0x20000},
588 {"partition-table", 0x20000, 0x02000},
589 {"default-mac", 0x30000, 0x00020},
590 {"product-info", 0x31100, 0x00100},
591 {"signature", 0x32000, 0x00400},
592 {"os-image", 0x40000, 0x200000},
593 {"file-system", 0x240000, 0x570000},
594 {"soft-version", 0x7b0000, 0x00100},
595 {"support-list", 0x7b1000, 0x00400},
596 {"user-config", 0x7c0000, 0x10000},
597 {"default-config", 0x7d0000, 0x10000},
598 {"log", 0x7e0000, 0x10000},
599 {"radio", 0x7f0000, 0x10000},
603 .first_sysupgrade_partition
= "os-image",
604 .last_sysupgrade_partition
= "support-list",
607 /** Firmware layout for the C2600 */
613 "{product_name:Archer C2600,product_ver:1.0.0,special_id:00000000}\r\n",
614 .support_trail
= '\x00',
618 We use a bigger os-image partition than the stock images (and thus
619 smaller file-system), as our kernel doesn't fit in the stock firmware's
620 2 MB os-image since kernel 4.14.
623 {"SBL1", 0x00000, 0x20000},
624 {"MIBIB", 0x20000, 0x20000},
625 {"SBL2", 0x40000, 0x20000},
626 {"SBL3", 0x60000, 0x30000},
627 {"DDRCONFIG", 0x90000, 0x10000},
628 {"SSD", 0xa0000, 0x10000},
629 {"TZ", 0xb0000, 0x30000},
630 {"RPM", 0xe0000, 0x20000},
631 {"fs-uboot", 0x100000, 0x70000},
632 {"uboot-env", 0x170000, 0x40000},
633 {"radio", 0x1b0000, 0x40000},
634 {"os-image", 0x1f0000, 0x400000}, /* Stock: base 0x1f0000 size 0x200000 */
635 {"file-system", 0x5f0000, 0x1900000}, /* Stock: base 0x3f0000 size 0x1b00000 */
636 {"default-mac", 0x1ef0000, 0x00200},
637 {"pin", 0x1ef0200, 0x00200},
638 {"product-info", 0x1ef0400, 0x0fc00},
639 {"partition-table", 0x1f00000, 0x10000},
640 {"soft-version", 0x1f10000, 0x10000},
641 {"support-list", 0x1f20000, 0x10000},
642 {"profile", 0x1f30000, 0x10000},
643 {"default-config", 0x1f40000, 0x10000},
644 {"user-config", 0x1f50000, 0x40000},
645 {"qos-db", 0x1f90000, 0x40000},
646 {"usb-config", 0x1fd0000, 0x10000},
647 {"log", 0x1fe0000, 0x20000},
651 .first_sysupgrade_partition
= "os-image",
652 .last_sysupgrade_partition
= "file-system"
655 /** Firmware layout for the A7-V5 */
657 .id
= "ARCHER-A7-V5",
660 "{product_name:Archer A7,product_ver:5.0.0,special_id:45550000}\n"
661 "{product_name:Archer A7,product_ver:5.0.0,special_id:55530000}\n"
662 "{product_name:Archer A7,product_ver:5.0.0,special_id:43410000}\n"
663 "{product_name:Archer A7,product_ver:5.0.0,special_id:4A500000}\n"
664 "{product_name:Archer A7,product_ver:5.0.0,special_id:54570000}\n",
665 .support_trail
= '\x00',
666 .soft_ver
= "soft_ver:1.0.0\n",
668 /* We're using a dynamic kernel/rootfs split here */
670 {"factory-boot", 0x00000, 0x20000},
671 {"fs-uboot", 0x20000, 0x20000},
672 {"firmware", 0x40000, 0xec0000}, /* Stock: name os-image base 0x40000 size 0x120000 */
673 /* Stock: name file-system base 0x160000 size 0xda0000 */
674 {"default-mac", 0xf40000, 0x00200},
675 {"pin", 0xf40200, 0x00200},
676 {"device-id", 0xf40400, 0x00100},
677 {"product-info", 0xf40500, 0x0fb00},
678 {"soft-version", 0xf50000, 0x00100},
679 {"extra-para", 0xf51000, 0x01000},
680 {"support-list", 0xf52000, 0x0a000},
681 {"profile", 0xf5c000, 0x04000},
682 {"default-config", 0xf60000, 0x10000},
683 {"user-config", 0xf70000, 0x40000},
684 {"certificate", 0xfb0000, 0x10000},
685 {"partition-table", 0xfc0000, 0x10000},
686 {"log", 0xfd0000, 0x20000},
687 {"radio", 0xff0000, 0x10000},
691 .first_sysupgrade_partition
= "os-image",
692 .last_sysupgrade_partition
= "file-system",
695 /** Firmware layout for the C2v3 */
697 .id
= "ARCHER-C2-V3",
700 "{product_name:ArcherC2,product_ver:3.0.0,special_id:00000000}\n"
701 "{product_name:ArcherC2,product_ver:3.0.0,special_id:55530000}\n"
702 "{product_name:ArcherC2,product_ver:3.0.0,special_id:45550000}\n",
703 .support_trail
= '\x00',
704 .soft_ver
= "soft_ver:3.0.1\n",
706 /** We're using a dynamic kernel/rootfs split here */
709 {"factory-boot", 0x00000, 0x20000},
710 {"fs-uboot", 0x20000, 0x10000},
711 {"firmware", 0x30000, 0x7a0000},
712 {"user-config", 0x7d0000, 0x04000},
713 {"default-mac", 0x7e0000, 0x00100},
714 {"device-id", 0x7e0100, 0x00100},
715 {"extra-para", 0x7e0200, 0x00100},
716 {"pin", 0x7e0300, 0x00100},
717 {"support-list", 0x7e0400, 0x00400},
718 {"soft-version", 0x7e0800, 0x00400},
719 {"product-info", 0x7e0c00, 0x01400},
720 {"partition-table", 0x7e2000, 0x01000},
721 {"profile", 0x7e3000, 0x01000},
722 {"default-config", 0x7e4000, 0x04000},
723 {"merge-config", 0x7ec000, 0x02000},
724 {"qos-db", 0x7ee000, 0x02000},
725 {"radio", 0x7f0000, 0x10000},
729 .first_sysupgrade_partition
= "os-image",
730 .last_sysupgrade_partition
= "file-system",
733 /** Firmware layout for the C25v1 */
735 .id
= "ARCHER-C25-V1",
738 "{product_name:ArcherC25,product_ver:1.0.0,special_id:00000000}\n"
739 "{product_name:ArcherC25,product_ver:1.0.0,special_id:55530000}\n"
740 "{product_name:ArcherC25,product_ver:1.0.0,special_id:45550000}\n",
741 .support_trail
= '\x00',
742 .soft_ver
= "soft_ver:1.0.0\n",
744 /* We're using a dynamic kernel/rootfs split here */
746 {"factory-boot", 0x00000, 0x20000},
747 {"fs-uboot", 0x20000, 0x10000},
748 {"firmware", 0x30000, 0x7a0000}, /* Stock: name os-image base 0x30000 size 0x100000 */
749 /* Stock: name file-system base 0x130000 size 0x6a0000 */
750 {"user-config", 0x7d0000, 0x04000},
751 {"default-mac", 0x7e0000, 0x00100},
752 {"device-id", 0x7e0100, 0x00100},
753 {"extra-para", 0x7e0200, 0x00100},
754 {"pin", 0x7e0300, 0x00100},
755 {"support-list", 0x7e0400, 0x00400},
756 {"soft-version", 0x7e0800, 0x00400},
757 {"product-info", 0x7e0c00, 0x01400},
758 {"partition-table", 0x7e2000, 0x01000},
759 {"profile", 0x7e3000, 0x01000},
760 {"default-config", 0x7e4000, 0x04000},
761 {"merge-config", 0x7ec000, 0x02000},
762 {"qos-db", 0x7ee000, 0x02000},
763 {"radio", 0x7f0000, 0x10000},
767 .first_sysupgrade_partition
= "os-image",
768 .last_sysupgrade_partition
= "file-system",
771 /** Firmware layout for the C58v1 */
773 .id
= "ARCHER-C58-V1",
777 "{product_name:Archer C58,product_ver:1.0.0,special_id:00000000}\r\n"
778 "{product_name:Archer C58,product_ver:1.0.0,special_id:45550000}\r\n"
779 "{product_name:Archer C58,product_ver:1.0.0,special_id:55530000}\r\n",
780 .support_trail
= '\x00',
781 .soft_ver
= "soft_ver:1.0.0\n",
784 {"fs-uboot", 0x00000, 0x10000},
785 {"default-mac", 0x10000, 0x00200},
786 {"pin", 0x10200, 0x00200},
787 {"product-info", 0x10400, 0x00100},
788 {"partition-table", 0x10500, 0x00800},
789 {"soft-version", 0x11300, 0x00200},
790 {"support-list", 0x11500, 0x00100},
791 {"device-id", 0x11600, 0x00100},
792 {"profile", 0x11700, 0x03900},
793 {"default-config", 0x15000, 0x04000},
794 {"user-config", 0x19000, 0x04000},
795 {"firmware", 0x20000, 0x7c8000},
796 {"certyficate", 0x7e8000, 0x08000},
797 {"radio", 0x7f0000, 0x10000},
801 .first_sysupgrade_partition
= "os-image",
802 .last_sysupgrade_partition
= "file-system",
805 /** Firmware layout for the C59v1 */
807 .id
= "ARCHER-C59-V1",
811 "{product_name:Archer C59,product_ver:1.0.0,special_id:00000000}\r\n"
812 "{product_name:Archer C59,product_ver:1.0.0,special_id:45550000}\r\n"
813 "{product_name:Archer C59,product_ver:1.0.0,special_id:52550000}\r\n"
814 "{product_name:Archer C59,product_ver:1.0.0,special_id:55530000}\r\n",
815 .support_trail
= '\x00',
816 .soft_ver
= "soft_ver:1.0.0\n",
818 /* We're using a dynamic kernel/rootfs split here */
820 {"fs-uboot", 0x00000, 0x10000},
821 {"default-mac", 0x10000, 0x00200},
822 {"pin", 0x10200, 0x00200},
823 {"device-id", 0x10400, 0x00100},
824 {"product-info", 0x10500, 0x0fb00},
825 {"firmware", 0x20000, 0xe30000},
826 {"partition-table", 0xe50000, 0x10000},
827 {"soft-version", 0xe60000, 0x10000},
828 {"support-list", 0xe70000, 0x10000},
829 {"profile", 0xe80000, 0x10000},
830 {"default-config", 0xe90000, 0x10000},
831 {"user-config", 0xea0000, 0x40000},
832 {"usb-config", 0xee0000, 0x10000},
833 {"certificate", 0xef0000, 0x10000},
834 {"qos-db", 0xf00000, 0x40000},
835 {"log", 0xfe0000, 0x10000},
836 {"radio", 0xff0000, 0x10000},
840 .first_sysupgrade_partition
= "os-image",
841 .last_sysupgrade_partition
= "file-system",
844 /** Firmware layout for the C59v2 */
846 .id
= "ARCHER-C59-V2",
850 "{product_name:Archer C59,product_ver:2.0.0,special_id:00000000}\r\n"
851 "{product_name:Archer C59,product_ver:2.0.0,special_id:45550000}\r\n"
852 "{product_name:Archer C59,product_ver:2.0.0,special_id:55530000}\r\n",
853 .support_trail
= '\x00',
854 .soft_ver
= "soft_ver:2.0.0 Build 20161206 rel.7303\n",
856 /** We're using a dynamic kernel/rootfs split here */
858 {"factory-boot", 0x00000, 0x20000},
859 {"fs-uboot", 0x20000, 0x10000},
860 {"default-mac", 0x30000, 0x00200},
861 {"pin", 0x30200, 0x00200},
862 {"device-id", 0x30400, 0x00100},
863 {"product-info", 0x30500, 0x0fb00},
864 {"firmware", 0x40000, 0xe10000},
865 {"partition-table", 0xe50000, 0x10000},
866 {"soft-version", 0xe60000, 0x10000},
867 {"support-list", 0xe70000, 0x10000},
868 {"profile", 0xe80000, 0x10000},
869 {"default-config", 0xe90000, 0x10000},
870 {"user-config", 0xea0000, 0x40000},
871 {"usb-config", 0xee0000, 0x10000},
872 {"certificate", 0xef0000, 0x10000},
873 {"extra-para", 0xf00000, 0x10000},
874 {"qos-db", 0xf10000, 0x30000},
875 {"log", 0xfe0000, 0x10000},
876 {"radio", 0xff0000, 0x10000},
880 .first_sysupgrade_partition
= "os-image",
881 .last_sysupgrade_partition
= "file-system",
884 /** Firmware layout for the Archer C6 v2 (EU/RU/JP) */
886 .id
= "ARCHER-C6-V2",
890 "{product_name:Archer C6,product_ver:2.0.0,special_id:45550000}\r\n"
891 "{product_name:Archer C6,product_ver:2.0.0,special_id:52550000}\r\n"
892 "{product_name:Archer C6,product_ver:2.0.0,special_id:4A500000}\r\n",
893 .support_trail
= '\x00',
894 .soft_ver
= "soft_ver:1.0.0\n",
897 {"fs-uboot", 0x00000, 0x20000},
898 {"default-mac", 0x20000, 0x00200},
899 {"pin", 0x20200, 0x00100},
900 {"product-info", 0x20300, 0x00200},
901 {"device-id", 0x20500, 0x0fb00},
902 {"firmware", 0x30000, 0x7a9400},
903 {"soft-version", 0x7d9400, 0x00100},
904 {"extra-para", 0x7d9500, 0x00100},
905 {"support-list", 0x7d9600, 0x00200},
906 {"profile", 0x7d9800, 0x03000},
907 {"default-config", 0x7dc800, 0x03000},
908 {"partition-table", 0x7df800, 0x00800},
909 {"user-config", 0x7e0000, 0x0c000},
910 {"certificate", 0x7ec000, 0x04000},
911 {"radio", 0x7f0000, 0x10000},
915 .first_sysupgrade_partition
= "os-image",
916 .last_sysupgrade_partition
= "file-system",
919 /** Firmware layout for the Archer C6 v2 (US) and A6 v2 (US/TW) */
921 .id
= "ARCHER-C6-V2-US",
925 "{product_name:Archer A6,product_ver:2.0.0,special_id:55530000}\n"
926 "{product_name:Archer A6,product_ver:2.0.0,special_id:54570000}\n"
927 "{product_name:Archer C6,product_ver:2.0.0,special_id:55530000}\n",
928 .support_trail
= '\x00',
929 .soft_ver
= "soft_ver:1.1.1\n",
932 {"factory-boot", 0x00000, 0x20000},
933 {"default-mac", 0x20000, 0x00200},
934 {"pin", 0x20200, 0x00100},
935 {"product-info", 0x20300, 0x00200},
936 {"device-id", 0x20500, 0x0fb00},
937 {"fs-uboot", 0x30000, 0x20000},
938 {"firmware", 0x50000, 0xf89400},
939 {"soft-version", 0xfd9400, 0x00100},
940 {"extra-para", 0xfd9500, 0x00100},
941 {"support-list", 0xfd9600, 0x00200},
942 {"profile", 0xfd9800, 0x03000},
943 {"default-config", 0xfdc800, 0x03000},
944 {"partition-table", 0xfdf800, 0x00800},
945 {"user-config", 0xfe0000, 0x0c000},
946 {"certificate", 0xfec000, 0x04000},
947 {"radio", 0xff0000, 0x10000},
950 .first_sysupgrade_partition
= "os-image",
951 .last_sysupgrade_partition
= "file-system",
954 /** Firmware layout for the C60v1 */
956 .id
= "ARCHER-C60-V1",
960 "{product_name:Archer C60,product_ver:1.0.0,special_id:00000000}\r\n"
961 "{product_name:Archer C60,product_ver:1.0.0,special_id:45550000}\r\n"
962 "{product_name:Archer C60,product_ver:1.0.0,special_id:55530000}\r\n",
963 .support_trail
= '\x00',
964 .soft_ver
= "soft_ver:1.0.0\n",
967 {"fs-uboot", 0x00000, 0x10000},
968 {"default-mac", 0x10000, 0x00200},
969 {"pin", 0x10200, 0x00200},
970 {"product-info", 0x10400, 0x00100},
971 {"partition-table", 0x10500, 0x00800},
972 {"soft-version", 0x11300, 0x00200},
973 {"support-list", 0x11500, 0x00100},
974 {"device-id", 0x11600, 0x00100},
975 {"profile", 0x11700, 0x03900},
976 {"default-config", 0x15000, 0x04000},
977 {"user-config", 0x19000, 0x04000},
978 {"firmware", 0x20000, 0x7c8000},
979 {"certyficate", 0x7e8000, 0x08000},
980 {"radio", 0x7f0000, 0x10000},
984 .first_sysupgrade_partition
= "os-image",
985 .last_sysupgrade_partition
= "file-system",
988 /** Firmware layout for the C60v2 */
990 .id
= "ARCHER-C60-V2",
994 "{product_name:Archer C60,product_ver:2.0.0,special_id:42520000}\r\n"
995 "{product_name:Archer C60,product_ver:2.0.0,special_id:45550000}\r\n"
996 "{product_name:Archer C60,product_ver:2.0.0,special_id:55530000}\r\n",
997 .support_trail
= '\x00',
998 .soft_ver
= "soft_ver:2.0.0\n",
1001 {"factory-boot", 0x00000, 0x1fb00},
1002 {"default-mac", 0x1fb00, 0x00200},
1003 {"pin", 0x1fd00, 0x00100},
1004 {"product-info", 0x1fe00, 0x00100},
1005 {"device-id", 0x1ff00, 0x00100},
1006 {"fs-uboot", 0x20000, 0x10000},
1007 {"firmware", 0x30000, 0x7a0000},
1008 {"soft-version", 0x7d9500, 0x00100},
1009 {"support-list", 0x7d9600, 0x00100},
1010 {"extra-para", 0x7d9700, 0x00100},
1011 {"profile", 0x7d9800, 0x03000},
1012 {"default-config", 0x7dc800, 0x03000},
1013 {"partition-table", 0x7df800, 0x00800},
1014 {"user-config", 0x7e0000, 0x0c000},
1015 {"certificate", 0x7ec000, 0x04000},
1016 {"radio", 0x7f0000, 0x10000},
1020 .first_sysupgrade_partition
= "os-image",
1021 .last_sysupgrade_partition
= "file-system",
1024 /** Firmware layout for the C5 */
1026 .id
= "ARCHER-C5-V2",
1030 "{product_name:ArcherC5,product_ver:2.0.0,special_id:00000000}\r\n"
1031 "{product_name:ArcherC5,product_ver:2.0.0,special_id:55530000}\r\n"
1032 "{product_name:ArcherC5,product_ver:2.0.0,special_id:4A500000}\r\n", /* JP version */
1033 .support_trail
= '\x00',
1037 {"fs-uboot", 0x00000, 0x40000},
1038 {"os-image", 0x40000, 0x200000},
1039 {"file-system", 0x240000, 0xc00000},
1040 {"default-mac", 0xe40000, 0x00200},
1041 {"pin", 0xe40200, 0x00200},
1042 {"product-info", 0xe40400, 0x00200},
1043 {"partition-table", 0xe50000, 0x10000},
1044 {"soft-version", 0xe60000, 0x00200},
1045 {"support-list", 0xe61000, 0x0f000},
1046 {"profile", 0xe70000, 0x10000},
1047 {"default-config", 0xe80000, 0x10000},
1048 {"user-config", 0xe90000, 0x50000},
1049 {"log", 0xee0000, 0x100000},
1050 {"radio_bk", 0xfe0000, 0x10000},
1051 {"radio", 0xff0000, 0x10000},
1055 .first_sysupgrade_partition
= "os-image",
1056 .last_sysupgrade_partition
= "file-system"
1059 /** Firmware layout for the C7 */
1061 .id
= "ARCHER-C7-V4",
1064 "{product_name:Archer C7,product_ver:4.0.0,special_id:00000000}\n"
1065 "{product_name:Archer C7,product_ver:4.0.0,special_id:41550000}\n"
1066 "{product_name:Archer C7,product_ver:4.0.0,special_id:45550000}\n"
1067 "{product_name:Archer C7,product_ver:4.0.0,special_id:4B520000}\n"
1068 "{product_name:Archer C7,product_ver:4.0.0,special_id:42520000}\n"
1069 "{product_name:Archer C7,product_ver:4.0.0,special_id:4A500000}\n"
1070 "{product_name:Archer C7,product_ver:4.0.0,special_id:52550000}\n"
1071 "{product_name:Archer C7,product_ver:4.0.0,special_id:54570000}\n"
1072 "{product_name:Archer C7,product_ver:4.0.0,special_id:55530000}\n"
1073 "{product_name:Archer C7,product_ver:4.0.0,special_id:43410000}\n",
1074 .support_trail
= '\x00',
1075 .soft_ver
= "soft_ver:1.0.0\n",
1077 /* We're using a dynamic kernel/rootfs split here */
1079 {"factory-boot", 0x00000, 0x20000},
1080 {"fs-uboot", 0x20000, 0x20000},
1081 {"firmware", 0x40000, 0xEC0000}, /* Stock: name os-image base 0x40000 size 0x120000 */
1082 /* Stock: name file-system base 0x160000 size 0xda0000 */
1083 {"default-mac", 0xf00000, 0x00200},
1084 {"pin", 0xf00200, 0x00200},
1085 {"device-id", 0xf00400, 0x00100},
1086 {"product-info", 0xf00500, 0x0fb00},
1087 {"soft-version", 0xf10000, 0x00100},
1088 {"extra-para", 0xf11000, 0x01000},
1089 {"support-list", 0xf12000, 0x0a000},
1090 {"profile", 0xf1c000, 0x04000},
1091 {"default-config", 0xf20000, 0x10000},
1092 {"user-config", 0xf30000, 0x40000},
1093 {"qos-db", 0xf70000, 0x40000},
1094 {"certificate", 0xfb0000, 0x10000},
1095 {"partition-table", 0xfc0000, 0x10000},
1096 {"log", 0xfd0000, 0x20000},
1097 {"radio", 0xff0000, 0x10000},
1101 .first_sysupgrade_partition
= "os-image",
1102 .last_sysupgrade_partition
= "file-system",
1105 /** Firmware layout for the C7 v5*/
1107 .id
= "ARCHER-C7-V5",
1110 "{product_name:Archer C7,product_ver:5.0.0,special_id:00000000}\n"
1111 "{product_name:Archer C7,product_ver:5.0.0,special_id:45550000}\n"
1112 "{product_name:Archer C7,product_ver:5.0.0,special_id:55530000}\n"
1113 "{product_name:Archer C7,product_ver:5.0.0,special_id:43410000}\n"
1114 "{product_name:Archer C7,product_ver:5.0.0,special_id:4A500000}\n"
1115 "{product_name:Archer C7,product_ver:5.0.0,special_id:54570000}\n"
1116 "{product_name:Archer C7,product_ver:5.0.0,special_id:52550000}\n"
1117 "{product_name:Archer C7,product_ver:5.0.0,special_id:4B520000}\n",
1119 .support_trail
= '\x00',
1120 .soft_ver
= "soft_ver:1.0.0\n",
1122 /* We're using a dynamic kernel/rootfs split here */
1124 {"factory-boot", 0x00000, 0x20000},
1125 {"fs-uboot", 0x20000, 0x20000},
1126 {"partition-table", 0x40000, 0x10000},
1127 {"radio", 0x50000, 0x10000},
1128 {"default-mac", 0x60000, 0x00200},
1129 {"pin", 0x60200, 0x00200},
1130 {"device-id", 0x60400, 0x00100},
1131 {"product-info", 0x60500, 0x0fb00},
1132 {"soft-version", 0x70000, 0x01000},
1133 {"extra-para", 0x71000, 0x01000},
1134 {"support-list", 0x72000, 0x0a000},
1135 {"profile", 0x7c000, 0x04000},
1136 {"user-config", 0x80000, 0x40000},
1139 {"firmware", 0xc0000, 0xf00000}, /* Stock: name os-image base 0xc0000 size 0x120000 */
1140 /* Stock: name file-system base 0x1e0000 size 0xde0000 */
1142 {"log", 0xfc0000, 0x20000},
1143 {"certificate", 0xfe0000, 0x10000},
1144 {"default-config", 0xff0000, 0x10000},
1149 .first_sysupgrade_partition
= "os-image",
1150 .last_sysupgrade_partition
= "file-system",
1153 /** Firmware layout for the C9 */
1159 "{product_name:ArcherC9,"
1160 "product_ver:1.0.0,"
1161 "special_id:00000000}\n",
1162 .support_trail
= '\x00',
1166 {"fs-uboot", 0x00000, 0x40000},
1167 {"os-image", 0x40000, 0x200000},
1168 {"file-system", 0x240000, 0xc00000},
1169 {"default-mac", 0xe40000, 0x00200},
1170 {"pin", 0xe40200, 0x00200},
1171 {"product-info", 0xe40400, 0x00200},
1172 {"partition-table", 0xe50000, 0x10000},
1173 {"soft-version", 0xe60000, 0x00200},
1174 {"support-list", 0xe61000, 0x0f000},
1175 {"profile", 0xe70000, 0x10000},
1176 {"default-config", 0xe80000, 0x10000},
1177 {"user-config", 0xe90000, 0x50000},
1178 {"log", 0xee0000, 0x100000},
1179 {"radio_bk", 0xfe0000, 0x10000},
1180 {"radio", 0xff0000, 0x10000},
1184 .first_sysupgrade_partition
= "os-image",
1185 .last_sysupgrade_partition
= "file-system"
1188 /** Firmware layout for the EAP120 */
1191 .vendor
= "EAP120(TP-LINK|UN|N300-2):1.0\r\n",
1194 "EAP120(TP-LINK|UN|N300-2):1.0\r\n",
1195 .support_trail
= '\xff',
1199 {"fs-uboot", 0x00000, 0x20000},
1200 {"partition-table", 0x20000, 0x02000},
1201 {"default-mac", 0x30000, 0x00020},
1202 {"support-list", 0x31000, 0x00100},
1203 {"product-info", 0x31100, 0x00100},
1204 {"soft-version", 0x32000, 0x00100},
1205 {"os-image", 0x40000, 0x180000},
1206 {"file-system", 0x1c0000, 0x600000},
1207 {"user-config", 0x7c0000, 0x10000},
1208 {"backup-config", 0x7d0000, 0x10000},
1209 {"log", 0x7e0000, 0x10000},
1210 {"radio", 0x7f0000, 0x10000},
1214 .first_sysupgrade_partition
= "os-image",
1215 .last_sysupgrade_partition
= "file-system"
1218 /** Firmware layout for the TL-WA850RE v2 */
1220 .id
= "TLWA850REV2",
1224 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:55530000}\n"
1225 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:00000000}\n"
1226 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:55534100}\n"
1227 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:45550000}\n"
1228 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:4B520000}\n"
1229 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:42520000}\n"
1230 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:4A500000}\n"
1231 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:43410000}\n"
1232 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:41550000}\n"
1233 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:52550000}\n",
1234 .support_trail
= '\x00',
1238 576KB were moved from file-system to os-image
1239 in comparison to the stock image
1242 {"fs-uboot", 0x00000, 0x20000},
1243 {"os-image", 0x20000, 0x150000},
1244 {"file-system", 0x170000, 0x240000},
1245 {"partition-table", 0x3b0000, 0x02000},
1246 {"default-mac", 0x3c0000, 0x00020},
1247 {"pin", 0x3c0100, 0x00020},
1248 {"product-info", 0x3c1000, 0x01000},
1249 {"soft-version", 0x3c2000, 0x00100},
1250 {"support-list", 0x3c3000, 0x01000},
1251 {"profile", 0x3c4000, 0x08000},
1252 {"user-config", 0x3d0000, 0x10000},
1253 {"default-config", 0x3e0000, 0x10000},
1254 {"radio", 0x3f0000, 0x10000},
1258 .first_sysupgrade_partition
= "os-image",
1259 .last_sysupgrade_partition
= "file-system"
1262 /** Firmware layout for the TL-WA855RE v1 */
1264 .id
= "TLWA855REV1",
1268 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:00000000}\n"
1269 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:55530000}\n"
1270 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:45550000}\n"
1271 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:4B520000}\n"
1272 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:42520000}\n"
1273 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:4A500000}\n"
1274 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:43410000}\n"
1275 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:41550000}\n"
1276 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:52550000}\n",
1277 .support_trail
= '\x00',
1281 {"fs-uboot", 0x00000, 0x20000},
1282 {"os-image", 0x20000, 0x150000},
1283 {"file-system", 0x170000, 0x240000},
1284 {"partition-table", 0x3b0000, 0x02000},
1285 {"default-mac", 0x3c0000, 0x00020},
1286 {"pin", 0x3c0100, 0x00020},
1287 {"product-info", 0x3c1000, 0x01000},
1288 {"soft-version", 0x3c2000, 0x00100},
1289 {"support-list", 0x3c3000, 0x01000},
1290 {"profile", 0x3c4000, 0x08000},
1291 {"user-config", 0x3d0000, 0x10000},
1292 {"default-config", 0x3e0000, 0x10000},
1293 {"radio", 0x3f0000, 0x10000},
1297 .first_sysupgrade_partition
= "os-image",
1298 .last_sysupgrade_partition
= "file-system"
1301 /** Firmware layout for the TL-WR1043 v5 */
1303 .id
= "TLWR1043NV5",
1307 "{product_name:TL-WR1043N,product_ver:5.0.0,special_id:45550000}\n"
1308 "{product_name:TL-WR1043N,product_ver:5.0.0,special_id:55530000}\n",
1309 .support_trail
= '\x00',
1310 .soft_ver
= "soft_ver:1.0.0\n",
1312 {"factory-boot", 0x00000, 0x20000},
1313 {"fs-uboot", 0x20000, 0x20000},
1314 {"firmware", 0x40000, 0xec0000},
1315 {"default-mac", 0xf00000, 0x00200},
1316 {"pin", 0xf00200, 0x00200},
1317 {"device-id", 0xf00400, 0x00100},
1318 {"product-info", 0xf00500, 0x0fb00},
1319 {"soft-version", 0xf10000, 0x01000},
1320 {"extra-para", 0xf11000, 0x01000},
1321 {"support-list", 0xf12000, 0x0a000},
1322 {"profile", 0xf1c000, 0x04000},
1323 {"default-config", 0xf20000, 0x10000},
1324 {"user-config", 0xf30000, 0x40000},
1325 {"qos-db", 0xf70000, 0x40000},
1326 {"certificate", 0xfb0000, 0x10000},
1327 {"partition-table", 0xfc0000, 0x10000},
1328 {"log", 0xfd0000, 0x20000},
1329 {"radio", 0xff0000, 0x10000},
1332 .first_sysupgrade_partition
= "os-image",
1333 .last_sysupgrade_partition
= "file-system"
1336 /** Firmware layout for the TL-WR1043 v4 */
1338 .id
= "TLWR1043NDV4",
1342 "{product_name:TL-WR1043ND,product_ver:4.0.0,special_id:45550000}\n",
1343 .support_trail
= '\x00',
1346 /* We're using a dynamic kernel/rootfs split here */
1348 {"fs-uboot", 0x00000, 0x20000},
1349 {"firmware", 0x20000, 0xf30000},
1350 {"default-mac", 0xf50000, 0x00200},
1351 {"pin", 0xf50200, 0x00200},
1352 {"product-info", 0xf50400, 0x0fc00},
1353 {"soft-version", 0xf60000, 0x0b000},
1354 {"support-list", 0xf6b000, 0x04000},
1355 {"profile", 0xf70000, 0x04000},
1356 {"default-config", 0xf74000, 0x0b000},
1357 {"user-config", 0xf80000, 0x40000},
1358 {"partition-table", 0xfc0000, 0x10000},
1359 {"log", 0xfd0000, 0x20000},
1360 {"radio", 0xff0000, 0x10000},
1364 .first_sysupgrade_partition
= "os-image",
1365 .last_sysupgrade_partition
= "file-system"
1368 /** Firmware layout for the TL-WR902AC v1 */
1370 .id
= "TL-WR902AC-V1",
1374 "{product_name:TL-WR902AC,product_ver:1.0.0,special_id:45550000}\n"
1375 "{product_name:TL-WR902AC,product_ver:1.0.0,special_id:55530000}\n",
1376 .support_trail
= '\x00',
1380 384KB were moved from file-system to os-image
1381 in comparison to the stock image
1384 {"fs-uboot", 0x00000, 0x20000},
1385 {"firmware", 0x20000, 0x730000},
1386 {"default-mac", 0x750000, 0x00200},
1387 {"pin", 0x750200, 0x00200},
1388 {"product-info", 0x750400, 0x0fc00},
1389 {"soft-version", 0x760000, 0x0b000},
1390 {"support-list", 0x76b000, 0x04000},
1391 {"profile", 0x770000, 0x04000},
1392 {"default-config", 0x774000, 0x0b000},
1393 {"user-config", 0x780000, 0x40000},
1394 {"partition-table", 0x7c0000, 0x10000},
1395 {"log", 0x7d0000, 0x20000},
1396 {"radio", 0x7f0000, 0x10000},
1400 .first_sysupgrade_partition
= "os-image",
1401 .last_sysupgrade_partition
= "file-system",
1404 /** Firmware layout for the TL-WR942N V1 */
1410 "{product_name:TL-WR942N,product_ver:1.0.0,special_id:00000000}\r\n"
1411 "{product_name:TL-WR942N,product_ver:1.0.0,special_id:52550000}\r\n",
1412 .support_trail
= '\x00',
1416 {"fs-uboot", 0x00000, 0x20000},
1417 {"firmware", 0x20000, 0xe20000},
1418 {"default-mac", 0xe40000, 0x00200},
1419 {"pin", 0xe40200, 0x00200},
1420 {"product-info", 0xe40400, 0x0fc00},
1421 {"partition-table", 0xe50000, 0x10000},
1422 {"soft-version", 0xe60000, 0x10000},
1423 {"support-list", 0xe70000, 0x10000},
1424 {"profile", 0xe80000, 0x10000},
1425 {"default-config", 0xe90000, 0x10000},
1426 {"user-config", 0xea0000, 0x40000},
1427 {"qos-db", 0xee0000, 0x40000},
1428 {"certificate", 0xf20000, 0x10000},
1429 {"usb-config", 0xfb0000, 0x10000},
1430 {"log", 0xfc0000, 0x20000},
1431 {"radio-bk", 0xfe0000, 0x10000},
1432 {"radio", 0xff0000, 0x10000},
1436 .first_sysupgrade_partition
= "os-image",
1437 .last_sysupgrade_partition
= "file-system",
1440 /** Firmware layout for the RE350 v1 */
1446 "{product_name:RE350,product_ver:1.0.0,special_id:45550000}\n"
1447 "{product_name:RE350,product_ver:1.0.0,special_id:00000000}\n"
1448 "{product_name:RE350,product_ver:1.0.0,special_id:41550000}\n"
1449 "{product_name:RE350,product_ver:1.0.0,special_id:55530000}\n"
1450 "{product_name:RE350,product_ver:1.0.0,special_id:43410000}\n"
1451 "{product_name:RE350,product_ver:1.0.0,special_id:4b520000}\n"
1452 "{product_name:RE350,product_ver:1.0.0,special_id:4a500000}\n",
1453 .support_trail
= '\x00',
1456 /** We're using a dynamic kernel/rootfs split here */
1458 {"fs-uboot", 0x00000, 0x20000},
1459 {"firmware", 0x20000, 0x5e0000},
1460 {"partition-table", 0x600000, 0x02000},
1461 {"default-mac", 0x610000, 0x00020},
1462 {"pin", 0x610100, 0x00020},
1463 {"product-info", 0x611100, 0x01000},
1464 {"soft-version", 0x620000, 0x01000},
1465 {"support-list", 0x621000, 0x01000},
1466 {"profile", 0x622000, 0x08000},
1467 {"user-config", 0x630000, 0x10000},
1468 {"default-config", 0x640000, 0x10000},
1469 {"radio", 0x7f0000, 0x10000},
1473 .first_sysupgrade_partition
= "os-image",
1474 .last_sysupgrade_partition
= "file-system"
1477 /** Firmware layout for the RE350K v1 */
1483 "{product_name:RE350K,product_ver:1.0.0,special_id:00000000,product_region:US}\n",
1484 .support_trail
= '\x00',
1487 /** We're using a dynamic kernel/rootfs split here */
1489 {"fs-uboot", 0x00000, 0x20000},
1490 {"firmware", 0x20000, 0xd70000},
1491 {"partition-table", 0xd90000, 0x02000},
1492 {"default-mac", 0xda0000, 0x00020},
1493 {"pin", 0xda0100, 0x00020},
1494 {"product-info", 0xda1100, 0x01000},
1495 {"soft-version", 0xdb0000, 0x01000},
1496 {"support-list", 0xdb1000, 0x01000},
1497 {"profile", 0xdb2000, 0x08000},
1498 {"user-config", 0xdc0000, 0x10000},
1499 {"default-config", 0xdd0000, 0x10000},
1500 {"device-id", 0xde0000, 0x00108},
1501 {"radio", 0xff0000, 0x10000},
1505 .first_sysupgrade_partition
= "os-image",
1506 .last_sysupgrade_partition
= "file-system"
1509 /** Firmware layout for the RE355 */
1515 "{product_name:RE355,product_ver:1.0.0,special_id:00000000}\r\n"
1516 "{product_name:RE355,product_ver:1.0.0,special_id:55530000}\r\n"
1517 "{product_name:RE355,product_ver:1.0.0,special_id:45550000}\r\n"
1518 "{product_name:RE355,product_ver:1.0.0,special_id:4A500000}\r\n"
1519 "{product_name:RE355,product_ver:1.0.0,special_id:43410000}\r\n"
1520 "{product_name:RE355,product_ver:1.0.0,special_id:41550000}\r\n"
1521 "{product_name:RE355,product_ver:1.0.0,special_id:4B520000}\r\n"
1522 "{product_name:RE355,product_ver:1.0.0,special_id:55534100}\r\n",
1523 .support_trail
= '\x00',
1526 /* We're using a dynamic kernel/rootfs split here */
1528 {"fs-uboot", 0x00000, 0x20000},
1529 {"firmware", 0x20000, 0x5e0000},
1530 {"partition-table", 0x600000, 0x02000},
1531 {"default-mac", 0x610000, 0x00020},
1532 {"pin", 0x610100, 0x00020},
1533 {"product-info", 0x611100, 0x01000},
1534 {"soft-version", 0x620000, 0x01000},
1535 {"support-list", 0x621000, 0x01000},
1536 {"profile", 0x622000, 0x08000},
1537 {"user-config", 0x630000, 0x10000},
1538 {"default-config", 0x640000, 0x10000},
1539 {"radio", 0x7f0000, 0x10000},
1543 .first_sysupgrade_partition
= "os-image",
1544 .last_sysupgrade_partition
= "file-system"
1547 /** Firmware layout for the RE450 */
1553 "{product_name:RE450,product_ver:1.0.0,special_id:00000000}\r\n"
1554 "{product_name:RE450,product_ver:1.0.0,special_id:55530000}\r\n"
1555 "{product_name:RE450,product_ver:1.0.0,special_id:45550000}\r\n"
1556 "{product_name:RE450,product_ver:1.0.0,special_id:4A500000}\r\n"
1557 "{product_name:RE450,product_ver:1.0.0,special_id:43410000}\r\n"
1558 "{product_name:RE450,product_ver:1.0.0,special_id:41550000}\r\n"
1559 "{product_name:RE450,product_ver:1.0.0,special_id:4B520000}\r\n"
1560 "{product_name:RE450,product_ver:1.0.0,special_id:55534100}\r\n",
1561 .support_trail
= '\x00',
1564 /** We're using a dynamic kernel/rootfs split here */
1566 {"fs-uboot", 0x00000, 0x20000},
1567 {"firmware", 0x20000, 0x5e0000},
1568 {"partition-table", 0x600000, 0x02000},
1569 {"default-mac", 0x610000, 0x00020},
1570 {"pin", 0x610100, 0x00020},
1571 {"product-info", 0x611100, 0x01000},
1572 {"soft-version", 0x620000, 0x01000},
1573 {"support-list", 0x621000, 0x01000},
1574 {"profile", 0x622000, 0x08000},
1575 {"user-config", 0x630000, 0x10000},
1576 {"default-config", 0x640000, 0x10000},
1577 {"radio", 0x7f0000, 0x10000},
1581 .first_sysupgrade_partition
= "os-image",
1582 .last_sysupgrade_partition
= "file-system"
1585 /** Firmware layout for the RE450 v2 */
1591 "{product_name:RE450,product_ver:2.0.0,special_id:00000000}\r\n"
1592 "{product_name:RE450,product_ver:2.0.0,special_id:55530000}\r\n"
1593 "{product_name:RE450,product_ver:2.0.0,special_id:45550000}\r\n"
1594 "{product_name:RE450,product_ver:2.0.0,special_id:4A500000}\r\n"
1595 "{product_name:RE450,product_ver:2.0.0,special_id:43410000}\r\n"
1596 "{product_name:RE450,product_ver:2.0.0,special_id:41550000}\r\n"
1597 "{product_name:RE450,product_ver:2.0.0,special_id:41530000}\r\n"
1598 "{product_name:RE450,product_ver:2.0.0,special_id:4B520000}\r\n"
1599 "{product_name:RE450,product_ver:2.0.0,special_id:42520000}\r\n",
1600 .support_trail
= '\x00',
1603 /* We're using a dynamic kernel/rootfs split here */
1605 {"fs-uboot", 0x00000, 0x20000},
1606 {"firmware", 0x20000, 0x5e0000},
1607 {"partition-table", 0x600000, 0x02000},
1608 {"default-mac", 0x610000, 0x00020},
1609 {"pin", 0x610100, 0x00020},
1610 {"product-info", 0x611100, 0x01000},
1611 {"soft-version", 0x620000, 0x01000},
1612 {"support-list", 0x621000, 0x01000},
1613 {"profile", 0x622000, 0x08000},
1614 {"user-config", 0x630000, 0x10000},
1615 {"default-config", 0x640000, 0x10000},
1616 {"radio", 0x7f0000, 0x10000},
1621 .first_sysupgrade_partition
= "os-image",
1622 .last_sysupgrade_partition
= "file-system"
1625 /** Firmware layout for the RE650 */
1631 "{product_name:RE650,product_ver:1.0.0,special_id:00000000}\r\n"
1632 "{product_name:RE650,product_ver:1.0.0,special_id:55530000}\r\n"
1633 "{product_name:RE650,product_ver:1.0.0,special_id:45550000}\r\n"
1634 "{product_name:RE650,product_ver:1.0.0,special_id:4A500000}\r\n"
1635 "{product_name:RE650,product_ver:1.0.0,special_id:43410000}\r\n"
1636 "{product_name:RE650,product_ver:1.0.0,special_id:41550000}\r\n"
1637 "{product_name:RE650,product_ver:1.0.0,special_id:41530000}\r\n",
1638 .support_trail
= '\x00',
1641 /* We're using a dynamic kernel/rootfs split here */
1643 {"fs-uboot", 0x00000, 0x20000},
1644 {"firmware", 0x20000, 0xde0000},
1645 {"partition-table", 0xe00000, 0x02000},
1646 {"default-mac", 0xe10000, 0x00020},
1647 {"pin", 0xe10100, 0x00020},
1648 {"product-info", 0xe11100, 0x01000},
1649 {"soft-version", 0xe20000, 0x01000},
1650 {"support-list", 0xe21000, 0x01000},
1651 {"profile", 0xe22000, 0x08000},
1652 {"user-config", 0xe30000, 0x10000},
1653 {"default-config", 0xe40000, 0x10000},
1654 {"radio", 0xff0000, 0x10000},
1658 .first_sysupgrade_partition
= "os-image",
1659 .last_sysupgrade_partition
= "file-system"
1665 #define error(_ret, _errno, _str, ...) \
1667 fprintf(stderr, _str ": %s\n", ## __VA_ARGS__, \
1668 strerror(_errno)); \
1674 /** Stores a uint32 as big endian */
1675 static inline void put32(uint8_t *buf
, uint32_t val
) {
1682 /** Allocates a new image partition */
1683 static struct image_partition_entry
alloc_image_partition(const char *name
, size_t len
) {
1684 struct image_partition_entry entry
= {name
, len
, malloc(len
)};
1686 error(1, errno
, "malloc");
1691 /** Frees an image partition */
1692 static void free_image_partition(struct image_partition_entry entry
) {
1696 static time_t source_date_epoch
= -1;
1697 static void set_source_date_epoch() {
1698 char *env
= getenv("SOURCE_DATE_EPOCH");
1702 source_date_epoch
= strtoull(env
, &endptr
, 10);
1703 if (errno
|| (endptr
&& *endptr
!= '\0')) {
1704 fprintf(stderr
, "Invalid SOURCE_DATE_EPOCH");
1710 /** Generates the partition-table partition */
1711 static struct image_partition_entry
make_partition_table(const struct flash_partition_entry
*p
) {
1712 struct image_partition_entry entry
= alloc_image_partition("partition-table", 0x800);
1714 char *s
= (char *)entry
.data
, *end
= (char *)(s
+entry
.size
);
1722 for (i
= 0; p
[i
].name
; i
++) {
1724 size_t w
= snprintf(s
, len
, "partition %s base 0x%05x size 0x%05x\n", p
[i
].name
, p
[i
].base
, p
[i
].size
);
1727 error(1, 0, "flash partition table overflow?");
1734 memset(s
, 0xff, end
-s
);
1740 /** Generates a binary-coded decimal representation of an integer in the range [0, 99] */
1741 static inline uint8_t bcd(uint8_t v
) {
1742 return 0x10 * (v
/10) + v
%10;
1746 /** Generates the soft-version partition */
1747 static struct image_partition_entry
make_soft_version(uint32_t rev
) {
1748 struct image_partition_entry entry
= alloc_image_partition("soft-version", sizeof(struct soft_version
));
1749 struct soft_version
*s
= (struct soft_version
*)entry
.data
;
1753 if (source_date_epoch
!= -1)
1754 t
= source_date_epoch
;
1755 else if (time(&t
) == (time_t)(-1))
1756 error(1, errno
, "time");
1758 struct tm
*tm
= localtime(&t
);
1760 s
->magic
= htonl(0x0000000c);
1764 s
->version_major
= 0;
1765 s
->version_minor
= 0;
1766 s
->version_patch
= 0;
1768 s
->year_hi
= bcd((1900+tm
->tm_year
)/100);
1769 s
->year_lo
= bcd(tm
->tm_year
%100);
1770 s
->month
= bcd(tm
->tm_mon
+1);
1771 s
->day
= bcd(tm
->tm_mday
);
1772 s
->rev
= htonl(rev
);
1779 static struct image_partition_entry
make_soft_version_from_string(const char *soft_ver
) {
1780 /** String length _including_ the terminating zero byte */
1781 uint32_t ver_len
= strlen(soft_ver
) + 1;
1782 /** Partition contains 64 bit header, the version string, and one additional null byte */
1783 size_t partition_len
= 2*sizeof(uint32_t) + ver_len
+ 1;
1784 struct image_partition_entry entry
= alloc_image_partition("soft-version", partition_len
);
1786 uint32_t *len
= (uint32_t *)entry
.data
;
1787 len
[0] = htonl(ver_len
);
1789 memcpy(&len
[2], soft_ver
, ver_len
);
1791 entry
.data
[partition_len
- 1] = 0;
1796 /** Generates the support-list partition */
1797 static struct image_partition_entry
make_support_list(struct device_info
*info
) {
1798 size_t len
= strlen(info
->support_list
);
1799 struct image_partition_entry entry
= alloc_image_partition("support-list", len
+ 9);
1801 put32(entry
.data
, len
);
1802 memset(entry
.data
+4, 0, 4);
1803 memcpy(entry
.data
+8, info
->support_list
, len
);
1804 entry
.data
[len
+8] = info
->support_trail
;
1809 /** Creates a new image partition with an arbitrary name from a file */
1810 static struct image_partition_entry
read_file(const char *part_name
, const char *filename
, bool add_jffs2_eof
, struct flash_partition_entry
*file_system_partition
) {
1811 struct stat statbuf
;
1813 if (stat(filename
, &statbuf
) < 0)
1814 error(1, errno
, "unable to stat file `%s'", filename
);
1816 size_t len
= statbuf
.st_size
;
1818 if (add_jffs2_eof
) {
1819 if (file_system_partition
)
1820 len
= ALIGN(len
+ file_system_partition
->base
, 0x10000) + sizeof(jffs2_eof_mark
) - file_system_partition
->base
;
1822 len
= ALIGN(len
, 0x10000) + sizeof(jffs2_eof_mark
);
1825 struct image_partition_entry entry
= alloc_image_partition(part_name
, len
);
1827 FILE *file
= fopen(filename
, "rb");
1829 error(1, errno
, "unable to open file `%s'", filename
);
1831 if (fread(entry
.data
, statbuf
.st_size
, 1, file
) != 1)
1832 error(1, errno
, "unable to read file `%s'", filename
);
1834 if (add_jffs2_eof
) {
1835 uint8_t *eof
= entry
.data
+ statbuf
.st_size
, *end
= entry
.data
+entry
.size
;
1837 memset(eof
, 0xff, end
- eof
- sizeof(jffs2_eof_mark
));
1838 memcpy(end
- sizeof(jffs2_eof_mark
), jffs2_eof_mark
, sizeof(jffs2_eof_mark
));
1846 /** Creates a new image partition from arbitrary data */
1847 static struct image_partition_entry
put_data(const char *part_name
, const char *datain
, size_t len
) {
1849 struct image_partition_entry entry
= alloc_image_partition(part_name
, len
);
1851 memcpy(entry
.data
, datain
, len
);
1857 Copies a list of image partitions into an image buffer and generates the image partition table while doing so
1859 Example image partition table:
1861 fwup-ptn partition-table base 0x00800 size 0x00800
1862 fwup-ptn os-image base 0x01000 size 0x113b45
1863 fwup-ptn file-system base 0x114b45 size 0x1d0004
1864 fwup-ptn support-list base 0x2e4b49 size 0x000d1
1866 Each line of the partition table is terminated with the bytes 09 0d 0a ("\t\r\n"),
1867 the end of the partition table is marked with a zero byte.
1869 The firmware image must contain at least the partition-table and support-list partitions
1870 to be accepted. There aren't any alignment constraints for the image partitions.
1872 The partition-table partition contains the actual flash layout; partitions
1873 from the image partition table are mapped to the corresponding flash partitions during
1874 the firmware upgrade. The support-list partition contains a list of devices supported by
1877 The base offsets in the firmware partition table are relative to the end
1878 of the vendor information block, so the partition-table partition will
1879 actually start at offset 0x1814 of the image.
1881 I think partition-table must be the first partition in the firmware image.
1883 static void put_partitions(uint8_t *buffer
, const struct flash_partition_entry
*flash_parts
, const struct image_partition_entry
*parts
) {
1885 char *image_pt
= (char *)buffer
, *end
= image_pt
+ 0x800;
1887 size_t base
= 0x800;
1888 for (i
= 0; parts
[i
].name
; i
++) {
1889 for (j
= 0; flash_parts
[j
].name
; j
++) {
1890 if (!strcmp(flash_parts
[j
].name
, parts
[i
].name
)) {
1891 if (parts
[i
].size
> flash_parts
[j
].size
)
1892 error(1, 0, "%s partition too big (more than %u bytes)", flash_parts
[j
].name
, (unsigned)flash_parts
[j
].size
);
1897 assert(flash_parts
[j
].name
);
1899 memcpy(buffer
+ base
, parts
[i
].data
, parts
[i
].size
);
1901 size_t len
= end
-image_pt
;
1902 size_t w
= snprintf(image_pt
, len
, "fwup-ptn %s base 0x%05x size 0x%05x\t\r\n", parts
[i
].name
, (unsigned)base
, (unsigned)parts
[i
].size
);
1905 error(1, 0, "image partition table overflow?");
1909 base
+= parts
[i
].size
;
1913 /** Generates and writes the image MD5 checksum */
1914 static void put_md5(uint8_t *md5
, uint8_t *buffer
, unsigned int len
) {
1918 MD5_Update(&ctx
, md5_salt
, (unsigned int)sizeof(md5_salt
));
1919 MD5_Update(&ctx
, buffer
, len
);
1920 MD5_Final(md5
, &ctx
);
1925 Generates the firmware image in factory format
1931 0000-0003 Image size (4 bytes, big endian)
1932 0004-0013 MD5 hash (hash of a 16 byte salt and the image data starting with byte 0x14)
1933 0014-0017 Vendor information length (without padding) (4 bytes, big endian)
1934 0018-1013 Vendor information (4092 bytes, padded with 0xff; there seem to be older
1935 (VxWorks-based) TP-LINK devices which use a smaller vendor information block)
1936 1014-1813 Image partition table (2048 bytes, padded with 0xff)
1937 1814-xxxx Firmware partitions
1939 static void * generate_factory_image(struct device_info
*info
, const struct image_partition_entry
*parts
, size_t *len
) {
1943 for (i
= 0; parts
[i
].name
; i
++)
1944 *len
+= parts
[i
].size
;
1946 uint8_t *image
= malloc(*len
);
1948 error(1, errno
, "malloc");
1950 memset(image
, 0xff, *len
);
1954 size_t vendor_len
= strlen(info
->vendor
);
1955 put32(image
+0x14, vendor_len
);
1956 memcpy(image
+0x18, info
->vendor
, vendor_len
);
1959 put_partitions(image
+ 0x1014, info
->partitions
, parts
);
1960 put_md5(image
+0x04, image
+0x14, *len
-0x14);
1966 Generates the firmware image in sysupgrade format
1968 This makes some assumptions about the provided flash and image partition tables and
1969 should be generalized when TP-LINK starts building its safeloader into hardware with
1970 different flash layouts.
1972 static void * generate_sysupgrade_image(struct device_info
*info
, const struct image_partition_entry
*image_parts
, size_t *len
) {
1974 size_t flash_first_partition_index
= 0;
1975 size_t flash_last_partition_index
= 0;
1976 const struct flash_partition_entry
*flash_first_partition
= NULL
;
1977 const struct flash_partition_entry
*flash_last_partition
= NULL
;
1978 const struct image_partition_entry
*image_last_partition
= NULL
;
1980 /** Find first and last partitions */
1981 for (i
= 0; info
->partitions
[i
].name
; i
++) {
1982 if (!strcmp(info
->partitions
[i
].name
, info
->first_sysupgrade_partition
)) {
1983 flash_first_partition
= &info
->partitions
[i
];
1984 flash_first_partition_index
= i
;
1985 } else if (!strcmp(info
->partitions
[i
].name
, info
->last_sysupgrade_partition
)) {
1986 flash_last_partition
= &info
->partitions
[i
];
1987 flash_last_partition_index
= i
;
1991 assert(flash_first_partition
&& flash_last_partition
);
1992 assert(flash_first_partition_index
< flash_last_partition_index
);
1994 /** Find last partition from image to calculate needed size */
1995 for (i
= 0; image_parts
[i
].name
; i
++) {
1996 if (!strcmp(image_parts
[i
].name
, info
->last_sysupgrade_partition
)) {
1997 image_last_partition
= &image_parts
[i
];
2002 assert(image_last_partition
);
2004 *len
= flash_last_partition
->base
- flash_first_partition
->base
+ image_last_partition
->size
;
2006 uint8_t *image
= malloc(*len
);
2008 error(1, errno
, "malloc");
2010 memset(image
, 0xff, *len
);
2012 for (i
= flash_first_partition_index
; i
<= flash_last_partition_index
; i
++) {
2013 for (j
= 0; image_parts
[j
].name
; j
++) {
2014 if (!strcmp(info
->partitions
[i
].name
, image_parts
[j
].name
)) {
2015 if (image_parts
[j
].size
> info
->partitions
[i
].size
)
2016 error(1, 0, "%s partition too big (more than %u bytes)", info
->partitions
[i
].name
, (unsigned)info
->partitions
[i
].size
);
2017 memcpy(image
+ info
->partitions
[i
].base
- flash_first_partition
->base
, image_parts
[j
].data
, image_parts
[j
].size
);
2021 assert(image_parts
[j
].name
);
2028 /** Generates an image according to a given layout and writes it to a file */
2029 static void build_image(const char *output
,
2030 const char *kernel_image
,
2031 const char *rootfs_image
,
2035 struct device_info
*info
) {
2039 struct image_partition_entry parts
[7] = {};
2041 struct flash_partition_entry
*firmware_partition
= NULL
;
2042 struct flash_partition_entry
*os_image_partition
= NULL
;
2043 struct flash_partition_entry
*file_system_partition
= NULL
;
2044 size_t firmware_partition_index
= 0;
2046 for (i
= 0; info
->partitions
[i
].name
; i
++) {
2047 if (!strcmp(info
->partitions
[i
].name
, "firmware"))
2049 firmware_partition
= &info
->partitions
[i
];
2050 firmware_partition_index
= i
;
2054 if (firmware_partition
)
2056 os_image_partition
= &info
->partitions
[firmware_partition_index
];
2057 file_system_partition
= &info
->partitions
[firmware_partition_index
+ 1];
2060 if (stat(kernel_image
, &kernel
) < 0)
2061 error(1, errno
, "unable to stat file `%s'", kernel_image
);
2063 if (kernel
.st_size
> firmware_partition
->size
)
2064 error(1, 0, "kernel overflowed firmware partition\n");
2066 for (i
= MAX_PARTITIONS
-1; i
>= firmware_partition_index
+ 1; i
--)
2067 info
->partitions
[i
+1] = info
->partitions
[i
];
2069 file_system_partition
->name
= "file-system";
2070 file_system_partition
->base
= firmware_partition
->base
+ kernel
.st_size
;
2072 /* Align partition start to erase blocks for factory images only */
2074 file_system_partition
->base
= ALIGN(firmware_partition
->base
+ kernel
.st_size
, 0x10000);
2076 file_system_partition
->size
= firmware_partition
->size
- file_system_partition
->base
;
2078 os_image_partition
->name
= "os-image";
2079 os_image_partition
->size
= kernel
.st_size
;
2082 parts
[0] = make_partition_table(info
->partitions
);
2084 parts
[1] = make_soft_version_from_string(info
->soft_ver
);
2086 parts
[1] = make_soft_version(rev
);
2088 parts
[2] = make_support_list(info
);
2089 parts
[3] = read_file("os-image", kernel_image
, false, NULL
);
2090 parts
[4] = read_file("file-system", rootfs_image
, add_jffs2_eof
, file_system_partition
);
2092 /* Some devices need the extra-para partition to accept the firmware */
2093 if (strcasecmp(info
->id
, "ARCHER-C2-V3") == 0 ||
2094 strcasecmp(info
->id
, "ARCHER-C25-V1") == 0 ||
2095 strcasecmp(info
->id
, "ARCHER-C59-V2") == 0 ||
2096 strcasecmp(info
->id
, "ARCHER-C60-V2") == 0 ||
2097 strcasecmp(info
->id
, "TLWR1043NV5") == 0) {
2098 const char mdat
[11] = {0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00};
2099 parts
[5] = put_data("extra-para", mdat
, 11);
2100 } else if (strcasecmp(info
->id
, "ARCHER-A7-V5") == 0 || strcasecmp(info
->id
, "ARCHER-C7-V4") == 0 || strcasecmp(info
->id
, "ARCHER-C7-V5") == 0) {
2101 const char mdat
[11] = {0x01, 0x00, 0x00, 0x02, 0x00, 0x00, 0xca, 0x00, 0x01, 0x00, 0x00};
2102 parts
[5] = put_data("extra-para", mdat
, 11);
2103 } else if (strcasecmp(info
->id
, "ARCHER-C6-V2") == 0) {
2104 const char mdat
[11] = {0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00};
2105 parts
[5] = put_data("extra-para", mdat
, 11);
2106 } else if (strcasecmp(info
->id
, "ARCHER-C6-V2-US") == 0) {
2107 const char mdat
[11] = {0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x00};
2108 parts
[5] = put_data("extra-para", mdat
, 11);
2114 image
= generate_sysupgrade_image(info
, parts
, &len
);
2116 image
= generate_factory_image(info
, parts
, &len
);
2118 FILE *file
= fopen(output
, "wb");
2120 error(1, errno
, "unable to open output file");
2122 if (fwrite(image
, len
, 1, file
) != 1)
2123 error(1, 0, "unable to write output file");
2129 for (i
= 0; parts
[i
].name
; i
++)
2130 free_image_partition(parts
[i
]);
2134 static void usage(const char *argv0
) {
2136 "Usage: %s [OPTIONS...]\n"
2139 " -h show this help\n"
2141 "Create a new image:\n"
2142 " -B <board> create image for the board specified with <board>\n"
2143 " -k <file> read kernel image from the file <file>\n"
2144 " -r <file> read rootfs image from the file <file>\n"
2145 " -o <file> write output to the file <file>\n"
2146 " -V <rev> sets the revision number to <rev>\n"
2147 " -j add jffs2 end-of-filesystem markers\n"
2148 " -S create sysupgrade instead of factory image\n"
2149 "Extract an old image:\n"
2150 " -x <file> extract all oem firmware partition\n"
2151 " -d <dir> destination to extract the firmware partition\n"
2152 " -z <file> convert an oem firmware into a sysupgade file. Use -o for output file\n",
2158 static struct device_info
*find_board(const char *id
)
2160 struct device_info
*board
= NULL
;
2162 for (board
= boards
; board
->id
!= NULL
; board
++)
2163 if (strcasecmp(id
, board
->id
) == 0)
2169 static int add_flash_partition(
2170 struct flash_partition_entry
*part_list
,
2177 /* check if the list has a free entry */
2178 for (ptr
= 0; ptr
< max_entries
; ptr
++, part_list
++) {
2179 if (part_list
->name
== NULL
&&
2180 part_list
->base
== 0 &&
2181 part_list
->size
== 0)
2185 if (ptr
== max_entries
) {
2186 error(1, 0, "No free flash part entry available.");
2189 part_list
->name
= calloc(1, strlen(name
) + 1);
2190 if (!part_list
->name
) {
2191 error(1, 0, "Unable to allocate memory");
2194 memcpy((char *)part_list
->name
, name
, strlen(name
));
2195 part_list
->base
= base
;
2196 part_list
->size
= size
;
2201 /** read the partition table into struct flash_partition_entry */
2202 static int read_partition_table(
2203 FILE *file
, long offset
,
2204 struct flash_partition_entry
*entries
, size_t max_entries
,
2209 const char *parthdr
= NULL
;
2210 const char *fwuphdr
= "fwup-ptn";
2211 const char *flashhdr
= "partition";
2213 /* TODO: search for the partition table */
2223 error(1, 0, "Invalid partition table");
2226 if (fseek(file
, offset
, SEEK_SET
) < 0)
2227 error(1, errno
, "Can not seek in the firmware");
2229 if (fread(buf
, 2048, 1, file
) != 1)
2230 error(1, errno
, "Can not read fwup-ptn from the firmware");
2234 /* look for the partition header */
2235 if (memcmp(buf
, parthdr
, strlen(parthdr
)) != 0) {
2236 fprintf(stderr
, "DEBUG: can not find fwuphdr\n");
2241 end
= buf
+ sizeof(buf
);
2242 while ((ptr
+ strlen(parthdr
)) < end
&&
2243 memcmp(ptr
, parthdr
, strlen(parthdr
)) == 0) {
2247 char name
[32] = { 0 };
2249 unsigned long base
= 0;
2250 unsigned long size
= 0;
2252 end_part
= memchr(ptr
, '\n', (end
- ptr
));
2253 if (end_part
== NULL
) {
2254 /* in theory this should never happen, because a partition always ends with 0x09, 0x0D, 0x0A */
2258 for (int i
= 0; i
<= 4; i
++) {
2259 if (end_part
<= ptr
)
2262 end_element
= memchr(ptr
, 0x20, (end_part
- ptr
));
2263 if (end_element
== NULL
) {
2264 error(1, errno
, "Ignoring the rest of the partition entries.");
2269 /* partition header */
2271 ptr
= end_element
+ 1;
2275 name_len
= (end_element
- ptr
) > 31 ? 31 : (end_element
- ptr
);
2276 strncpy(name
, ptr
, name_len
);
2277 name
[name_len
] = '\0';
2278 ptr
= end_element
+ 1;
2283 ptr
= end_element
+ 1;
2288 base
= strtoul(ptr
, NULL
, 16);
2289 ptr
= end_element
+ 1;
2294 ptr
= end_element
+ 1;
2295 /* actual size. The last element doesn't have a sepeartor */
2296 size
= strtoul(ptr
, NULL
, 16);
2297 /* the part ends with 0x09, 0x0d, 0x0a */
2299 add_flash_partition(entries
, max_entries
, name
, base
, size
);
2308 static void write_partition(
2310 size_t firmware_offset
,
2311 struct flash_partition_entry
*entry
,
2317 fseek(input_file
, entry
->base
+ firmware_offset
, SEEK_SET
);
2319 for (offset
= 0; sizeof(buf
) + offset
<= entry
->size
; offset
+= sizeof(buf
)) {
2320 if (fread(buf
, sizeof(buf
), 1, input_file
) != 1)
2321 error(1, errno
, "Can not read partition from input_file");
2323 if (fwrite(buf
, sizeof(buf
), 1, output_file
) != 1)
2324 error(1, errno
, "Can not write partition to output_file");
2326 /* write last chunk smaller than buffer */
2327 if (offset
< entry
->size
) {
2328 offset
= entry
->size
- offset
;
2329 if (fread(buf
, offset
, 1, input_file
) != 1)
2330 error(1, errno
, "Can not read partition from input_file");
2331 if (fwrite(buf
, offset
, 1, output_file
) != 1)
2332 error(1, errno
, "Can not write partition to output_file");
2336 static int extract_firmware_partition(FILE *input_file
, size_t firmware_offset
, struct flash_partition_entry
*entry
, const char *output_directory
)
2339 char output
[PATH_MAX
];
2341 snprintf(output
, PATH_MAX
, "%s/%s", output_directory
, entry
->name
);
2342 output_file
= fopen(output
, "wb+");
2343 if (output_file
== NULL
) {
2344 error(1, errno
, "Can not open output file %s", output
);
2347 write_partition(input_file
, firmware_offset
, entry
, output_file
);
2349 fclose(output_file
);
2354 /** extract all partitions from the firmware file */
2355 static int extract_firmware(const char *input
, const char *output_directory
)
2357 struct flash_partition_entry entries
[16] = { 0 };
2358 size_t max_entries
= 16;
2359 size_t firmware_offset
= 0x1014;
2362 struct stat statbuf
;
2364 /* check input file */
2365 if (stat(input
, &statbuf
)) {
2366 error(1, errno
, "Can not read input firmware %s", input
);
2369 /* check if output directory exists */
2370 if (stat(output_directory
, &statbuf
)) {
2371 error(1, errno
, "Failed to stat output directory %s", output_directory
);
2374 if ((statbuf
.st_mode
& S_IFMT
) != S_IFDIR
) {
2375 error(1, errno
, "Given output directory is not a directory %s", output_directory
);
2378 input_file
= fopen(input
, "rb");
2380 if (read_partition_table(input_file
, firmware_offset
, entries
, 16, 0) != 0) {
2381 error(1, 0, "Error can not read the partition table (fwup-ptn)");
2384 for (size_t i
= 0; i
< max_entries
; i
++) {
2385 if (entries
[i
].name
== NULL
&&
2386 entries
[i
].base
== 0 &&
2387 entries
[i
].size
== 0)
2390 extract_firmware_partition(input_file
, firmware_offset
, &entries
[i
], output_directory
);
2396 static struct flash_partition_entry
*find_partition(
2397 struct flash_partition_entry
*entries
, size_t max_entries
,
2398 const char *name
, const char *error_msg
)
2400 for (size_t i
= 0; i
< max_entries
; i
++, entries
++) {
2401 if (strcmp(entries
->name
, name
) == 0)
2405 error(1, 0, "%s", error_msg
);
2409 static void write_ff(FILE *output_file
, size_t size
)
2414 memset(buf
, 0xff, sizeof(buf
));
2416 for (offset
= 0; offset
+ sizeof(buf
) < size
; offset
+= sizeof(buf
)) {
2417 if (fwrite(buf
, sizeof(buf
), 1, output_file
) != 1)
2418 error(1, errno
, "Can not write 0xff to output_file");
2421 /* write last chunk smaller than buffer */
2422 if (offset
< size
) {
2423 offset
= size
- offset
;
2424 if (fwrite(buf
, offset
, 1, output_file
) != 1)
2425 error(1, errno
, "Can not write partition to output_file");
2429 static void convert_firmware(const char *input
, const char *output
)
2431 struct flash_partition_entry fwup
[MAX_PARTITIONS
] = { 0 };
2432 struct flash_partition_entry flash
[MAX_PARTITIONS
] = { 0 };
2433 struct flash_partition_entry
*fwup_os_image
= NULL
, *fwup_file_system
= NULL
;
2434 struct flash_partition_entry
*flash_os_image
= NULL
, *flash_file_system
= NULL
;
2435 struct flash_partition_entry
*fwup_partition_table
= NULL
;
2436 size_t firmware_offset
= 0x1014;
2437 FILE *input_file
, *output_file
;
2439 struct stat statbuf
;
2441 /* check input file */
2442 if (stat(input
, &statbuf
)) {
2443 error(1, errno
, "Can not read input firmware %s", input
);
2446 input_file
= fopen(input
, "rb");
2448 error(1, 0, "Can not open input firmware %s", input
);
2450 output_file
= fopen(output
, "wb");
2452 error(1, 0, "Can not open output firmware %s", output
);
2454 if (read_partition_table(input_file
, firmware_offset
, fwup
, MAX_PARTITIONS
, 0) != 0) {
2455 error(1, 0, "Error can not read the partition table (fwup-ptn)");
2458 fwup_os_image
= find_partition(fwup
, MAX_PARTITIONS
,
2459 "os-image", "Error can not find os-image partition (fwup)");
2460 fwup_file_system
= find_partition(fwup
, MAX_PARTITIONS
,
2461 "file-system", "Error can not find file-system partition (fwup)");
2462 fwup_partition_table
= find_partition(fwup
, MAX_PARTITIONS
,
2463 "partition-table", "Error can not find partition-table partition");
2465 /* the flash partition table has a 0x00000004 magic haeder */
2466 if (read_partition_table(input_file
, firmware_offset
+ fwup_partition_table
->base
+ 4, flash
, MAX_PARTITIONS
, 1) != 0)
2467 error(1, 0, "Error can not read the partition table (flash)");
2469 flash_os_image
= find_partition(flash
, MAX_PARTITIONS
,
2470 "os-image", "Error can not find os-image partition (flash)");
2471 flash_file_system
= find_partition(flash
, MAX_PARTITIONS
,
2472 "file-system", "Error can not find file-system partition (flash)");
2474 /* write os_image to 0x0 */
2475 write_partition(input_file
, firmware_offset
, fwup_os_image
, output_file
);
2476 write_ff(output_file
, flash_os_image
->size
- fwup_os_image
->size
);
2478 /* write file-system behind os_image */
2479 fseek(output_file
, flash_file_system
->base
- flash_os_image
->base
, SEEK_SET
);
2480 write_partition(input_file
, firmware_offset
, fwup_file_system
, output_file
);
2481 write_ff(output_file
, flash_file_system
->size
- fwup_file_system
->size
);
2483 fclose(output_file
);
2487 int main(int argc
, char *argv
[]) {
2488 const char *board
= NULL
, *kernel_image
= NULL
, *rootfs_image
= NULL
, *output
= NULL
;
2489 const char *extract_image
= NULL
, *output_directory
= NULL
, *convert_image
= NULL
;
2490 bool add_jffs2_eof
= false, sysupgrade
= false;
2492 struct device_info
*info
;
2493 set_source_date_epoch();
2498 c
= getopt(argc
, argv
, "B:k:r:o:V:jSh:x:d:z:");
2508 kernel_image
= optarg
;
2512 rootfs_image
= optarg
;
2520 sscanf(optarg
, "r%u", &rev
);
2524 add_jffs2_eof
= true;
2536 output_directory
= optarg
;
2540 extract_image
= optarg
;
2544 convert_image
= optarg
;
2553 if (extract_image
|| output_directory
) {
2555 error(1, 0, "No factory/oem image given via -x <file>. Output directory is only valid with -x");
2556 if (!output_directory
)
2557 error(1, 0, "Can not extract an image without output directory. Use -d <dir>");
2558 extract_firmware(extract_image
, output_directory
);
2559 } else if (convert_image
) {
2561 error(1, 0, "Can not convert a factory/oem image into sysupgrade image without output file. Use -o <file>");
2562 convert_firmware(convert_image
, output
);
2565 error(1, 0, "no board has been specified");
2567 error(1, 0, "no kernel image has been specified");
2569 error(1, 0, "no rootfs image has been specified");
2571 error(1, 0, "no output filename has been specified");
2573 info
= find_board(board
);
2576 error(1, 0, "unsupported board %s", board
);
2578 build_image(output
, kernel_image
, rootfs_image
, rev
, add_jffs2_eof
, sysupgrade
, info
);