2 Copyright (c) 2014, Matthias Schiffer <mschiffer@universe-factory.net>
5 Redistribution and use in source and binary forms, with or without
6 modification, are permitted provided that the following conditions are met:
8 1. Redistributions of source code must retain the above copyright notice,
9 this list of conditions and the following disclaimer.
10 2. Redistributions in binary form must reproduce the above copyright notice,
11 this list of conditions and the following disclaimer in the documentation
12 and/or other materials provided with the distribution.
14 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
15 AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16 IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
17 DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
18 FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19 DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
20 SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
21 CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
22 OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
23 OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
30 Image generation tool for the TP-LINK SafeLoader as seen on
31 TP-LINK Pharos devices (CPE210/220/510/520)
47 #include <arpa/inet.h>
49 #include <sys/types.h>
56 #define ALIGN(x,a) ({ typeof(a) __a = (a); (((x) + __a - 1) & ~(__a - 1)); })
59 #define MAX_PARTITIONS 32
61 /** An image partition table entry */
62 struct image_partition_entry
{
68 /** A flash partition table entry */
69 struct flash_partition_entry
{
75 /** Partition trailing padding definitions
76 * Values 0x00 to 0xff are reserved to indicate the padding value
77 * Values from 0x100 are reserved to indicate other behaviour */
78 enum partition_trail_value
{
81 PART_TRAIL_MAX
= 0xff,
82 PART_TRAIL_NONE
= 0x100
85 /** Firmware layout description */
89 const char *support_list
;
90 enum partition_trail_value part_trail
;
92 uint32_t soft_ver_compat_level
;
93 struct flash_partition_entry partitions
[MAX_PARTITIONS
+1];
94 const char *first_sysupgrade_partition
;
95 const char *last_sysupgrade_partition
;
98 struct __attribute__((__packed__
)) meta_header
{
103 /** The content of the soft-version structure */
104 struct __attribute__((__packed__
)) soft_version
{
106 uint8_t version_major
;
107 uint8_t version_minor
;
108 uint8_t version_patch
;
114 uint32_t compat_level
;
118 static const uint8_t jffs2_eof_mark
[4] = {0xde, 0xad, 0xc0, 0xde};
122 Salt for the MD5 hash
124 Fortunately, TP-LINK seems to use the same salt for most devices which use
125 the new image format.
127 static const uint8_t md5_salt
[16] = {
128 0x7a, 0x2b, 0x15, 0xed,
129 0x9b, 0x98, 0x59, 0x6d,
130 0xe5, 0x04, 0xab, 0x44,
131 0xac, 0x2a, 0x9f, 0x4e,
135 /** Firmware layout table */
136 static struct device_info boards
[] = {
137 /** Firmware layout for the CPE210/220 V1 */
140 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
143 "CPE210(TP-LINK|UN|N300-2):1.0\r\n"
144 "CPE210(TP-LINK|UN|N300-2):1.1\r\n"
145 "CPE210(TP-LINK|US|N300-2):1.1\r\n"
146 "CPE210(TP-LINK|EU|N300-2):1.1\r\n"
147 "CPE220(TP-LINK|UN|N300-2):1.1\r\n"
148 "CPE220(TP-LINK|US|N300-2):1.1\r\n"
149 "CPE220(TP-LINK|EU|N300-2):1.1\r\n",
154 {"fs-uboot", 0x00000, 0x20000},
155 {"partition-table", 0x20000, 0x02000},
156 {"default-mac", 0x30000, 0x00020},
157 {"product-info", 0x31100, 0x00100},
158 {"signature", 0x32000, 0x00400},
159 {"firmware", 0x40000, 0x770000},
160 {"soft-version", 0x7b0000, 0x00100},
161 {"support-list", 0x7b1000, 0x00400},
162 {"user-config", 0x7c0000, 0x10000},
163 {"default-config", 0x7d0000, 0x10000},
164 {"log", 0x7e0000, 0x10000},
165 {"radio", 0x7f0000, 0x10000},
169 .first_sysupgrade_partition
= "os-image",
170 .last_sysupgrade_partition
= "support-list",
173 /** Firmware layout for the CPE210 V2 */
176 .vendor
= "CPE210(TP-LINK|UN|N300-2|00000000):2.0\r\n",
179 "CPE210(TP-LINK|EU|N300-2|00000000):2.0\r\n"
180 "CPE210(TP-LINK|EU|N300-2|45550000):2.0\r\n"
181 "CPE210(TP-LINK|EU|N300-2|55530000):2.0\r\n"
182 "CPE210(TP-LINK|UN|N300-2|00000000):2.0\r\n"
183 "CPE210(TP-LINK|UN|N300-2|45550000):2.0\r\n"
184 "CPE210(TP-LINK|UN|N300-2|55530000):2.0\r\n"
185 "CPE210(TP-LINK|US|N300-2|55530000):2.0\r\n"
186 "CPE210(TP-LINK|UN|N300-2):2.0\r\n"
187 "CPE210(TP-LINK|EU|N300-2):2.0\r\n"
188 "CPE210(TP-LINK|US|N300-2):2.0\r\n",
193 {"fs-uboot", 0x00000, 0x20000},
194 {"partition-table", 0x20000, 0x02000},
195 {"default-mac", 0x30000, 0x00020},
196 {"product-info", 0x31100, 0x00100},
197 {"device-info", 0x31400, 0x00400},
198 {"signature", 0x32000, 0x00400},
199 {"device-id", 0x33000, 0x00100},
200 {"firmware", 0x40000, 0x770000},
201 {"soft-version", 0x7b0000, 0x00100},
202 {"support-list", 0x7b1000, 0x01000},
203 {"user-config", 0x7c0000, 0x10000},
204 {"default-config", 0x7d0000, 0x10000},
205 {"log", 0x7e0000, 0x10000},
206 {"radio", 0x7f0000, 0x10000},
210 .first_sysupgrade_partition
= "os-image",
211 .last_sysupgrade_partition
= "support-list",
214 /** Firmware layout for the CPE210 V3 */
217 .vendor
= "CPE210(TP-LINK|UN|N300-2|00000000):3.0\r\n",
220 "CPE210(TP-LINK|EU|N300-2|45550000):3.0\r\n"
221 "CPE210(TP-LINK|UN|N300-2|00000000):3.0\r\n"
222 "CPE210(TP-LINK|US|N300-2|55530000):3.0\r\n"
223 "CPE210(TP-LINK|UN|N300-2):3.0\r\n"
224 "CPE210(TP-LINK|EU|N300-2):3.0\r\n"
225 "CPE210(TP-LINK|EU|N300-2|45550000):3.1\r\n"
226 "CPE210(TP-LINK|UN|N300-2|00000000):3.1\r\n"
227 "CPE210(TP-LINK|US|N300-2|55530000):3.1\r\n"
228 "CPE210(TP-LINK|EU|N300-2|45550000):3.20\r\n"
229 "CPE210(TP-LINK|UN|N300-2|00000000):3.20\r\n"
230 "CPE210(TP-LINK|US|N300-2|55530000):3.20\r\n",
235 {"fs-uboot", 0x00000, 0x20000},
236 {"partition-table", 0x20000, 0x01000},
237 {"default-mac", 0x30000, 0x00020},
238 {"product-info", 0x31100, 0x00100},
239 {"device-info", 0x31400, 0x00400},
240 {"signature", 0x32000, 0x00400},
241 {"device-id", 0x33000, 0x00100},
242 {"firmware", 0x40000, 0x770000},
243 {"soft-version", 0x7b0000, 0x00100},
244 {"support-list", 0x7b1000, 0x01000},
245 {"user-config", 0x7c0000, 0x10000},
246 {"default-config", 0x7d0000, 0x10000},
247 {"log", 0x7e0000, 0x10000},
248 {"radio", 0x7f0000, 0x10000},
252 .first_sysupgrade_partition
= "os-image",
253 .last_sysupgrade_partition
= "support-list",
256 /** Firmware layout for the CPE220 V2 */
259 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
262 "CPE220(TP-LINK|EU|N300-2|00000000):2.0\r\n"
263 "CPE220(TP-LINK|EU|N300-2|45550000):2.0\r\n"
264 "CPE220(TP-LINK|EU|N300-2|55530000):2.0\r\n"
265 "CPE220(TP-LINK|UN|N300-2|00000000):2.0\r\n"
266 "CPE220(TP-LINK|UN|N300-2|45550000):2.0\r\n"
267 "CPE220(TP-LINK|UN|N300-2|55530000):2.0\r\n"
268 "CPE220(TP-LINK|US|N300-2|55530000):2.0\r\n"
269 "CPE220(TP-LINK|UN|N300-2):2.0\r\n"
270 "CPE220(TP-LINK|EU|N300-2):2.0\r\n"
271 "CPE220(TP-LINK|US|N300-2):2.0\r\n",
276 {"fs-uboot", 0x00000, 0x20000},
277 {"partition-table", 0x20000, 0x02000},
278 {"default-mac", 0x30000, 0x00020},
279 {"product-info", 0x31100, 0x00100},
280 {"signature", 0x32000, 0x00400},
281 {"firmware", 0x40000, 0x770000},
282 {"soft-version", 0x7b0000, 0x00100},
283 {"support-list", 0x7b1000, 0x00400},
284 {"user-config", 0x7c0000, 0x10000},
285 {"default-config", 0x7d0000, 0x10000},
286 {"log", 0x7e0000, 0x10000},
287 {"radio", 0x7f0000, 0x10000},
291 .first_sysupgrade_partition
= "os-image",
292 .last_sysupgrade_partition
= "support-list",
295 /** Firmware layout for the CPE220 V3 */
298 .vendor
= "CPE220(TP-LINK|UN|N300-2|00000000):3.0\r\n",
301 "CPE220(TP-LINK|EU|N300-2|00000000):3.0\r\n"
302 "CPE220(TP-LINK|EU|N300-2|45550000):3.0\r\n"
303 "CPE220(TP-LINK|EU|N300-2|55530000):3.0\r\n"
304 "CPE220(TP-LINK|UN|N300-2|00000000):3.0\r\n"
305 "CPE220(TP-LINK|UN|N300-2|45550000):3.0\r\n"
306 "CPE220(TP-LINK|UN|N300-2|55530000):3.0\r\n"
307 "CPE220(TP-LINK|US|N300-2|55530000):3.0\r\n"
308 "CPE220(TP-LINK|UN|N300-2):3.0\r\n"
309 "CPE220(TP-LINK|EU|N300-2):3.0\r\n"
310 "CPE220(TP-LINK|US|N300-2):3.0\r\n",
315 {"fs-uboot", 0x00000, 0x20000},
316 {"partition-table", 0x20000, 0x02000},
317 {"default-mac", 0x30000, 0x00020},
318 {"product-info", 0x31100, 0x00100},
319 {"device-info", 0x31400, 0x00400},
320 {"signature", 0x32000, 0x00400},
321 {"device-id", 0x33000, 0x00100},
322 {"firmware", 0x40000, 0x770000},
323 {"soft-version", 0x7b0000, 0x00100},
324 {"support-list", 0x7b1000, 0x01000},
325 {"user-config", 0x7c0000, 0x10000},
326 {"default-config", 0x7d0000, 0x10000},
327 {"log", 0x7e0000, 0x10000},
328 {"radio", 0x7f0000, 0x10000},
332 .first_sysupgrade_partition
= "os-image",
333 .last_sysupgrade_partition
= "support-list",
336 /** Firmware layout for the CPE510/520 V1 */
339 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
342 "CPE510(TP-LINK|UN|N300-5):1.0\r\n"
343 "CPE510(TP-LINK|UN|N300-5):1.1\r\n"
344 "CPE510(TP-LINK|UN|N300-5):1.1\r\n"
345 "CPE510(TP-LINK|US|N300-5):1.1\r\n"
346 "CPE510(TP-LINK|EU|N300-5):1.1\r\n"
347 "CPE520(TP-LINK|UN|N300-5):1.1\r\n"
348 "CPE520(TP-LINK|US|N300-5):1.1\r\n"
349 "CPE520(TP-LINK|EU|N300-5):1.1\r\n",
354 {"fs-uboot", 0x00000, 0x20000},
355 {"partition-table", 0x20000, 0x02000},
356 {"default-mac", 0x30000, 0x00020},
357 {"product-info", 0x31100, 0x00100},
358 {"signature", 0x32000, 0x00400},
359 {"firmware", 0x40000, 0x770000},
360 {"soft-version", 0x7b0000, 0x00100},
361 {"support-list", 0x7b1000, 0x00400},
362 {"user-config", 0x7c0000, 0x10000},
363 {"default-config", 0x7d0000, 0x10000},
364 {"log", 0x7e0000, 0x10000},
365 {"radio", 0x7f0000, 0x10000},
369 .first_sysupgrade_partition
= "os-image",
370 .last_sysupgrade_partition
= "support-list",
373 /** Firmware layout for the CPE510 V2 */
376 .vendor
= "CPE510(TP-LINK|UN|N300-5):2.0\r\n",
379 "CPE510(TP-LINK|EU|N300-5|00000000):2.0\r\n"
380 "CPE510(TP-LINK|EU|N300-5|45550000):2.0\r\n"
381 "CPE510(TP-LINK|EU|N300-5|55530000):2.0\r\n"
382 "CPE510(TP-LINK|UN|N300-5|00000000):2.0\r\n"
383 "CPE510(TP-LINK|UN|N300-5|45550000):2.0\r\n"
384 "CPE510(TP-LINK|UN|N300-5|55530000):2.0\r\n"
385 "CPE510(TP-LINK|US|N300-5|00000000):2.0\r\n"
386 "CPE510(TP-LINK|US|N300-5|45550000):2.0\r\n"
387 "CPE510(TP-LINK|US|N300-5|55530000):2.0\r\n"
388 "CPE510(TP-LINK|UN|N300-5):2.0\r\n"
389 "CPE510(TP-LINK|EU|N300-5):2.0\r\n"
390 "CPE510(TP-LINK|US|N300-5):2.0\r\n",
395 {"fs-uboot", 0x00000, 0x20000},
396 {"partition-table", 0x20000, 0x02000},
397 {"default-mac", 0x30000, 0x00020},
398 {"product-info", 0x31100, 0x00100},
399 {"signature", 0x32000, 0x00400},
400 {"firmware", 0x40000, 0x770000},
401 {"soft-version", 0x7b0000, 0x00100},
402 {"support-list", 0x7b1000, 0x00400},
403 {"user-config", 0x7c0000, 0x10000},
404 {"default-config", 0x7d0000, 0x10000},
405 {"log", 0x7e0000, 0x10000},
406 {"radio", 0x7f0000, 0x10000},
410 .first_sysupgrade_partition
= "os-image",
411 .last_sysupgrade_partition
= "support-list",
414 /** Firmware layout for the CPE510 V3 */
417 .vendor
= "CPE510(TP-LINK|UN|N300-5):3.0\r\n",
420 "CPE510(TP-LINK|EU|N300-5|00000000):3.0\r\n"
421 "CPE510(TP-LINK|EU|N300-5|45550000):3.0\r\n"
422 "CPE510(TP-LINK|EU|N300-5|55530000):3.0\r\n"
423 "CPE510(TP-LINK|UN|N300-5|00000000):3.0\r\n"
424 "CPE510(TP-LINK|UN|N300-5|45550000):3.0\r\n"
425 "CPE510(TP-LINK|UN|N300-5|55530000):3.0\r\n"
426 "CPE510(TP-LINK|US|N300-5|00000000):3.0\r\n"
427 "CPE510(TP-LINK|US|N300-5|45550000):3.0\r\n"
428 "CPE510(TP-LINK|US|N300-5|55530000):3.0\r\n"
429 "CPE510(TP-LINK|UN|N300-5):3.0\r\n"
430 "CPE510(TP-LINK|EU|N300-5):3.0\r\n"
431 "CPE510(TP-LINK|US|N300-5):3.0\r\n"
432 "CPE510(TP-LINK|UN|N300-5|00000000):3.20\r\n"
433 "CPE510(TP-LINK|US|N300-5|55530000):3.20\r\n"
434 "CPE510(TP-LINK|EU|N300-5|45550000):3.20\r\n",
439 {"fs-uboot", 0x00000, 0x20000},
440 {"partition-table", 0x20000, 0x02000},
441 {"default-mac", 0x30000, 0x00020},
442 {"product-info", 0x31100, 0x00100},
443 {"signature", 0x32000, 0x00400},
444 {"firmware", 0x40000, 0x770000},
445 {"soft-version", 0x7b0000, 0x00100},
446 {"support-list", 0x7b1000, 0x00400},
447 {"user-config", 0x7c0000, 0x10000},
448 {"default-config", 0x7d0000, 0x10000},
449 {"log", 0x7e0000, 0x10000},
450 {"radio", 0x7f0000, 0x10000},
454 .first_sysupgrade_partition
= "os-image",
455 .last_sysupgrade_partition
= "support-list",
458 /** Firmware layout for the CPE610V1 */
461 .vendor
= "CPE610(TP-LINK|UN|N300-5|00000000):1.0\r\n",
464 "CPE610(TP-LINK|EU|N300-5|00000000):1.0\r\n"
465 "CPE610(TP-LINK|EU|N300-5|45550000):1.0\r\n"
466 "CPE610(TP-LINK|EU|N300-5|55530000):1.0\r\n"
467 "CPE610(TP-LINK|UN|N300-5|00000000):1.0\r\n"
468 "CPE610(TP-LINK|UN|N300-5|45550000):1.0\r\n"
469 "CPE610(TP-LINK|UN|N300-5|55530000):1.0\r\n"
470 "CPE610(TP-LINK|US|N300-5|55530000):1.0\r\n"
471 "CPE610(TP-LINK|UN|N300-5):1.0\r\n"
472 "CPE610(TP-LINK|EU|N300-5):1.0\r\n"
473 "CPE610(TP-LINK|US|N300-5):1.0\r\n",
478 {"fs-uboot", 0x00000, 0x20000},
479 {"partition-table", 0x20000, 0x02000},
480 {"default-mac", 0x30000, 0x00020},
481 {"product-info", 0x31100, 0x00100},
482 {"signature", 0x32000, 0x00400},
483 {"firmware", 0x40000, 0x770000},
484 {"soft-version", 0x7b0000, 0x00100},
485 {"support-list", 0x7b1000, 0x00400},
486 {"user-config", 0x7c0000, 0x10000},
487 {"default-config", 0x7d0000, 0x10000},
488 {"log", 0x7e0000, 0x10000},
489 {"radio", 0x7f0000, 0x10000},
493 .first_sysupgrade_partition
= "os-image",
494 .last_sysupgrade_partition
= "support-list",
497 /** Firmware layout for the CPE610V2 */
500 .vendor
= "CPE610(TP-LINK|UN|N300-5|00000000):2.0\r\n",
503 "CPE610(TP-LINK|EU|N300-5|00000000):2.0\r\n"
504 "CPE610(TP-LINK|EU|N300-5|45550000):2.0\r\n"
505 "CPE610(TP-LINK|EU|N300-5|55530000):2.0\r\n"
506 "CPE610(TP-LINK|UN|N300-5|00000000):2.0\r\n"
507 "CPE610(TP-LINK|UN|N300-5|45550000):2.0\r\n"
508 "CPE610(TP-LINK|UN|N300-5|55530000):2.0\r\n"
509 "CPE610(TP-LINK|US|N300-5|55530000):2.0\r\n"
510 "CPE610(TP-LINK|UN|N300-5):2.0\r\n"
511 "CPE610(TP-LINK|EU|N300-5):2.0\r\n"
512 "CPE610(TP-LINK|US|N300-5):2.0\r\n",
517 {"fs-uboot", 0x00000, 0x20000},
518 {"partition-table", 0x20000, 0x02000},
519 {"default-mac", 0x30000, 0x00020},
520 {"product-info", 0x31100, 0x00100},
521 {"signature", 0x32000, 0x00400},
522 {"firmware", 0x40000, 0x770000},
523 {"soft-version", 0x7b0000, 0x00100},
524 {"support-list", 0x7b1000, 0x00400},
525 {"user-config", 0x7c0000, 0x10000},
526 {"default-config", 0x7d0000, 0x10000},
527 {"log", 0x7e0000, 0x10000},
528 {"radio", 0x7f0000, 0x10000},
532 .first_sysupgrade_partition
= "os-image",
533 .last_sysupgrade_partition
= "support-list",
538 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
541 "WBS210(TP-LINK|UN|N300-2):1.20\r\n"
542 "WBS210(TP-LINK|US|N300-2):1.20\r\n"
543 "WBS210(TP-LINK|EU|N300-2):1.20\r\n",
548 {"fs-uboot", 0x00000, 0x20000},
549 {"partition-table", 0x20000, 0x02000},
550 {"default-mac", 0x30000, 0x00020},
551 {"product-info", 0x31100, 0x00100},
552 {"signature", 0x32000, 0x00400},
553 {"firmware", 0x40000, 0x770000},
554 {"soft-version", 0x7b0000, 0x00100},
555 {"support-list", 0x7b1000, 0x00400},
556 {"user-config", 0x7c0000, 0x10000},
557 {"default-config", 0x7d0000, 0x10000},
558 {"log", 0x7e0000, 0x10000},
559 {"radio", 0x7f0000, 0x10000},
563 .first_sysupgrade_partition
= "os-image",
564 .last_sysupgrade_partition
= "support-list",
569 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
572 "WBS210(TP-LINK|UN|N300-2|00000000):2.0\r\n"
573 "WBS210(TP-LINK|US|N300-2|55530000):2.0\r\n"
574 "WBS210(TP-LINK|EU|N300-2|45550000):2.0\r\n",
579 {"fs-uboot", 0x00000, 0x20000},
580 {"partition-table", 0x20000, 0x02000},
581 {"default-mac", 0x30000, 0x00020},
582 {"product-info", 0x31100, 0x00100},
583 {"signature", 0x32000, 0x00400},
584 {"firmware", 0x40000, 0x770000},
585 {"soft-version", 0x7b0000, 0x00100},
586 {"support-list", 0x7b1000, 0x00400},
587 {"user-config", 0x7c0000, 0x10000},
588 {"default-config", 0x7d0000, 0x10000},
589 {"log", 0x7e0000, 0x10000},
590 {"radio", 0x7f0000, 0x10000},
594 .first_sysupgrade_partition
= "os-image",
595 .last_sysupgrade_partition
= "support-list",
600 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
603 "WBS510(TP-LINK|UN|N300-5):1.20\r\n"
604 "WBS510(TP-LINK|US|N300-5):1.20\r\n"
605 "WBS510(TP-LINK|EU|N300-5):1.20\r\n"
606 "WBS510(TP-LINK|CA|N300-5):1.20\r\n",
611 {"fs-uboot", 0x00000, 0x20000},
612 {"partition-table", 0x20000, 0x02000},
613 {"default-mac", 0x30000, 0x00020},
614 {"product-info", 0x31100, 0x00100},
615 {"signature", 0x32000, 0x00400},
616 {"firmware", 0x40000, 0x770000},
617 {"soft-version", 0x7b0000, 0x00100},
618 {"support-list", 0x7b1000, 0x00400},
619 {"user-config", 0x7c0000, 0x10000},
620 {"default-config", 0x7d0000, 0x10000},
621 {"log", 0x7e0000, 0x10000},
622 {"radio", 0x7f0000, 0x10000},
626 .first_sysupgrade_partition
= "os-image",
627 .last_sysupgrade_partition
= "support-list",
632 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
635 "WBS510(TP-LINK|UN|N300-5|00000000):2.0\r\n"
636 "WBS510(TP-LINK|US|N300-5|55530000):2.0\r\n"
637 "WBS510(TP-LINK|EU|N300-5|45550000):2.0\r\n"
638 "WBS510(TP-LINK|CA|N300-5|43410000):2.0\r\n",
643 {"fs-uboot", 0x00000, 0x20000},
644 {"partition-table", 0x20000, 0x02000},
645 {"default-mac", 0x30000, 0x00020},
646 {"product-info", 0x31100, 0x00100},
647 {"signature", 0x32000, 0x00400},
648 {"firmware", 0x40000, 0x770000},
649 {"soft-version", 0x7b0000, 0x00100},
650 {"support-list", 0x7b1000, 0x00400},
651 {"user-config", 0x7c0000, 0x10000},
652 {"default-config", 0x7d0000, 0x10000},
653 {"log", 0x7e0000, 0x10000},
654 {"radio", 0x7f0000, 0x10000},
658 .first_sysupgrade_partition
= "os-image",
659 .last_sysupgrade_partition
= "support-list",
662 /** Firmware layout for the AD7200 */
668 "{product_name:AD7200,product_ver:1.0.0,special_id:00000000}\r\n",
673 {"SBL1", 0x00000, 0x20000},
674 {"MIBIB", 0x20000, 0x20000},
675 {"SBL2", 0x40000, 0x20000},
676 {"SBL3", 0x60000, 0x30000},
677 {"DDRCONFIG", 0x90000, 0x10000},
678 {"SSD", 0xa0000, 0x10000},
679 {"TZ", 0xb0000, 0x30000},
680 {"RPM", 0xe0000, 0x20000},
681 {"fs-uboot", 0x100000, 0x70000},
682 {"uboot-env", 0x170000, 0x40000},
683 {"radio", 0x1b0000, 0x40000},
684 {"os-image", 0x1f0000, 0x400000},
685 {"file-system", 0x5f0000, 0x1900000},
686 {"default-mac", 0x1ef0000, 0x00200},
687 {"pin", 0x1ef0200, 0x00200},
688 {"device-id", 0x1ef0400, 0x00200},
689 {"product-info", 0x1ef0600, 0x0fa00},
690 {"partition-table", 0x1f00000, 0x10000},
691 {"soft-version", 0x1f10000, 0x10000},
692 {"support-list", 0x1f20000, 0x10000},
693 {"profile", 0x1f30000, 0x10000},
694 {"default-config", 0x1f40000, 0x10000},
695 {"user-config", 0x1f50000, 0x40000},
696 {"qos-db", 0x1f90000, 0x40000},
697 {"usb-config", 0x1fd0000, 0x10000},
698 {"log", 0x1fe0000, 0x20000},
702 .first_sysupgrade_partition
= "os-image",
703 .last_sysupgrade_partition
= "file-system"
706 /** Firmware layout for the C2600 */
712 "{product_name:Archer C2600,product_ver:1.0.0,special_id:00000000}\r\n",
717 We use a bigger os-image partition than the stock images (and thus
718 smaller file-system), as our kernel doesn't fit in the stock firmware's
719 2 MB os-image since kernel 4.14.
722 {"SBL1", 0x00000, 0x20000},
723 {"MIBIB", 0x20000, 0x20000},
724 {"SBL2", 0x40000, 0x20000},
725 {"SBL3", 0x60000, 0x30000},
726 {"DDRCONFIG", 0x90000, 0x10000},
727 {"SSD", 0xa0000, 0x10000},
728 {"TZ", 0xb0000, 0x30000},
729 {"RPM", 0xe0000, 0x20000},
730 {"fs-uboot", 0x100000, 0x70000},
731 {"uboot-env", 0x170000, 0x40000},
732 {"radio", 0x1b0000, 0x40000},
733 {"os-image", 0x1f0000, 0x400000}, /* Stock: base 0x1f0000 size 0x200000 */
734 {"file-system", 0x5f0000, 0x1900000}, /* Stock: base 0x3f0000 size 0x1b00000 */
735 {"default-mac", 0x1ef0000, 0x00200},
736 {"pin", 0x1ef0200, 0x00200},
737 {"product-info", 0x1ef0400, 0x0fc00},
738 {"partition-table", 0x1f00000, 0x10000},
739 {"soft-version", 0x1f10000, 0x10000},
740 {"support-list", 0x1f20000, 0x10000},
741 {"profile", 0x1f30000, 0x10000},
742 {"default-config", 0x1f40000, 0x10000},
743 {"user-config", 0x1f50000, 0x40000},
744 {"qos-db", 0x1f90000, 0x40000},
745 {"usb-config", 0x1fd0000, 0x10000},
746 {"log", 0x1fe0000, 0x20000},
750 .first_sysupgrade_partition
= "os-image",
751 .last_sysupgrade_partition
= "file-system"
754 /** Firmware layout for the A7-V5 */
756 .id
= "ARCHER-A7-V5",
759 "{product_name:Archer A7,product_ver:5.0.0,special_id:45550000}\n"
760 "{product_name:Archer A7,product_ver:5.0.0,special_id:55530000}\n"
761 "{product_name:Archer A7,product_ver:5.0.0,special_id:43410000}\n"
762 "{product_name:Archer A7,product_ver:5.0.0,special_id:4A500000}\n"
763 "{product_name:Archer A7,product_ver:5.0.0,special_id:54570000}\n"
764 "{product_name:Archer A7,product_ver:5.0.0,special_id:52550000}\n",
766 .soft_ver
= "soft_ver:1.0.0\n",
768 /* We're using a dynamic kernel/rootfs split here */
770 {"factory-boot", 0x00000, 0x20000},
771 {"fs-uboot", 0x20000, 0x20000},
772 {"firmware", 0x40000, 0xec0000}, /* Stock: name os-image base 0x40000 size 0x120000 */
773 /* Stock: name file-system base 0x160000 size 0xda0000 */
774 {"default-mac", 0xf40000, 0x00200},
775 {"pin", 0xf40200, 0x00200},
776 {"device-id", 0xf40400, 0x00100},
777 {"product-info", 0xf40500, 0x0fb00},
778 {"soft-version", 0xf50000, 0x00100},
779 {"extra-para", 0xf51000, 0x01000},
780 {"support-list", 0xf52000, 0x0a000},
781 {"profile", 0xf5c000, 0x04000},
782 {"default-config", 0xf60000, 0x10000},
783 {"user-config", 0xf70000, 0x40000},
784 {"certificate", 0xfb0000, 0x10000},
785 {"partition-table", 0xfc0000, 0x10000},
786 {"log", 0xfd0000, 0x20000},
787 {"radio", 0xff0000, 0x10000},
791 .first_sysupgrade_partition
= "os-image",
792 .last_sysupgrade_partition
= "file-system",
795 /** Firmware layout for the C2v3 */
797 .id
= "ARCHER-C2-V3",
800 "{product_name:ArcherC2,product_ver:3.0.0,special_id:00000000}\n"
801 "{product_name:ArcherC2,product_ver:3.0.0,special_id:55530000}\n"
802 "{product_name:ArcherC2,product_ver:3.0.0,special_id:45550000}\n",
804 .soft_ver
= "soft_ver:3.0.1\n",
806 /** We're using a dynamic kernel/rootfs split here */
809 {"factory-boot", 0x00000, 0x20000},
810 {"fs-uboot", 0x20000, 0x10000},
811 {"firmware", 0x30000, 0x7a0000},
812 {"user-config", 0x7d0000, 0x04000},
813 {"default-mac", 0x7e0000, 0x00100},
814 {"device-id", 0x7e0100, 0x00100},
815 {"extra-para", 0x7e0200, 0x00100},
816 {"pin", 0x7e0300, 0x00100},
817 {"support-list", 0x7e0400, 0x00400},
818 {"soft-version", 0x7e0800, 0x00400},
819 {"product-info", 0x7e0c00, 0x01400},
820 {"partition-table", 0x7e2000, 0x01000},
821 {"profile", 0x7e3000, 0x01000},
822 {"default-config", 0x7e4000, 0x04000},
823 {"merge-config", 0x7ec000, 0x02000},
824 {"qos-db", 0x7ee000, 0x02000},
825 {"radio", 0x7f0000, 0x10000},
829 .first_sysupgrade_partition
= "os-image",
830 .last_sysupgrade_partition
= "file-system",
833 /** Firmware layout for the C25v1 */
835 .id
= "ARCHER-C25-V1",
838 "{product_name:ArcherC25,product_ver:1.0.0,special_id:00000000}\n"
839 "{product_name:ArcherC25,product_ver:1.0.0,special_id:55530000}\n"
840 "{product_name:ArcherC25,product_ver:1.0.0,special_id:45550000}\n",
842 .soft_ver
= "soft_ver:1.0.0\n",
844 /* We're using a dynamic kernel/rootfs split here */
846 {"factory-boot", 0x00000, 0x20000},
847 {"fs-uboot", 0x20000, 0x10000},
848 {"firmware", 0x30000, 0x7a0000}, /* Stock: name os-image base 0x30000 size 0x100000 */
849 /* Stock: name file-system base 0x130000 size 0x6a0000 */
850 {"user-config", 0x7d0000, 0x04000},
851 {"default-mac", 0x7e0000, 0x00100},
852 {"device-id", 0x7e0100, 0x00100},
853 {"extra-para", 0x7e0200, 0x00100},
854 {"pin", 0x7e0300, 0x00100},
855 {"support-list", 0x7e0400, 0x00400},
856 {"soft-version", 0x7e0800, 0x00400},
857 {"product-info", 0x7e0c00, 0x01400},
858 {"partition-table", 0x7e2000, 0x01000},
859 {"profile", 0x7e3000, 0x01000},
860 {"default-config", 0x7e4000, 0x04000},
861 {"merge-config", 0x7ec000, 0x02000},
862 {"qos-db", 0x7ee000, 0x02000},
863 {"radio", 0x7f0000, 0x10000},
867 .first_sysupgrade_partition
= "os-image",
868 .last_sysupgrade_partition
= "file-system",
871 /** Firmware layout for the C58v1 */
873 .id
= "ARCHER-C58-V1",
877 "{product_name:Archer C58,product_ver:1.0.0,special_id:00000000}\r\n"
878 "{product_name:Archer C58,product_ver:1.0.0,special_id:45550000}\r\n"
879 "{product_name:Archer C58,product_ver:1.0.0,special_id:55530000}\r\n",
881 .soft_ver
= "soft_ver:1.0.0\n",
884 {"fs-uboot", 0x00000, 0x10000},
885 {"default-mac", 0x10000, 0x00200},
886 {"pin", 0x10200, 0x00200},
887 {"product-info", 0x10400, 0x00100},
888 {"partition-table", 0x10500, 0x00800},
889 {"soft-version", 0x11300, 0x00200},
890 {"support-list", 0x11500, 0x00100},
891 {"device-id", 0x11600, 0x00100},
892 {"profile", 0x11700, 0x03900},
893 {"default-config", 0x15000, 0x04000},
894 {"user-config", 0x19000, 0x04000},
895 {"firmware", 0x20000, 0x7c8000},
896 {"certyficate", 0x7e8000, 0x08000},
897 {"radio", 0x7f0000, 0x10000},
901 .first_sysupgrade_partition
= "os-image",
902 .last_sysupgrade_partition
= "file-system",
905 /** Firmware layout for the C59v1 */
907 .id
= "ARCHER-C59-V1",
911 "{product_name:Archer C59,product_ver:1.0.0,special_id:00000000}\r\n"
912 "{product_name:Archer C59,product_ver:1.0.0,special_id:45550000}\r\n"
913 "{product_name:Archer C59,product_ver:1.0.0,special_id:52550000}\r\n"
914 "{product_name:Archer C59,product_ver:1.0.0,special_id:55530000}\r\n",
916 .soft_ver
= "soft_ver:1.0.0\n",
918 /* We're using a dynamic kernel/rootfs split here */
920 {"fs-uboot", 0x00000, 0x10000},
921 {"default-mac", 0x10000, 0x00200},
922 {"pin", 0x10200, 0x00200},
923 {"device-id", 0x10400, 0x00100},
924 {"product-info", 0x10500, 0x0fb00},
925 {"firmware", 0x20000, 0xe30000},
926 {"partition-table", 0xe50000, 0x10000},
927 {"soft-version", 0xe60000, 0x10000},
928 {"support-list", 0xe70000, 0x10000},
929 {"profile", 0xe80000, 0x10000},
930 {"default-config", 0xe90000, 0x10000},
931 {"user-config", 0xea0000, 0x40000},
932 {"usb-config", 0xee0000, 0x10000},
933 {"certificate", 0xef0000, 0x10000},
934 {"qos-db", 0xf00000, 0x40000},
935 {"log", 0xfe0000, 0x10000},
936 {"radio", 0xff0000, 0x10000},
940 .first_sysupgrade_partition
= "os-image",
941 .last_sysupgrade_partition
= "file-system",
944 /** Firmware layout for the C59v2 */
946 .id
= "ARCHER-C59-V2",
950 "{product_name:Archer C59,product_ver:2.0.0,special_id:00000000}\r\n"
951 "{product_name:Archer C59,product_ver:2.0.0,special_id:45550000}\r\n"
952 "{product_name:Archer C59,product_ver:2.0.0,special_id:55530000}\r\n",
954 .soft_ver
= "soft_ver:2.0.0 Build 20161206 rel.7303\n",
956 /** We're using a dynamic kernel/rootfs split here */
958 {"factory-boot", 0x00000, 0x20000},
959 {"fs-uboot", 0x20000, 0x10000},
960 {"default-mac", 0x30000, 0x00200},
961 {"pin", 0x30200, 0x00200},
962 {"device-id", 0x30400, 0x00100},
963 {"product-info", 0x30500, 0x0fb00},
964 {"firmware", 0x40000, 0xe10000},
965 {"partition-table", 0xe50000, 0x10000},
966 {"soft-version", 0xe60000, 0x10000},
967 {"support-list", 0xe70000, 0x10000},
968 {"profile", 0xe80000, 0x10000},
969 {"default-config", 0xe90000, 0x10000},
970 {"user-config", 0xea0000, 0x40000},
971 {"usb-config", 0xee0000, 0x10000},
972 {"certificate", 0xef0000, 0x10000},
973 {"extra-para", 0xf00000, 0x10000},
974 {"qos-db", 0xf10000, 0x30000},
975 {"log", 0xfe0000, 0x10000},
976 {"radio", 0xff0000, 0x10000},
980 .first_sysupgrade_partition
= "os-image",
981 .last_sysupgrade_partition
= "file-system",
984 /** Firmware layout for the Archer C6 v2 (EU/RU/JP) */
986 .id
= "ARCHER-C6-V2",
990 "{product_name:Archer C6,product_ver:2.0.0,special_id:45550000}\r\n"
991 "{product_name:Archer C6,product_ver:2.0.0,special_id:52550000}\r\n"
992 "{product_name:Archer C6,product_ver:2.0.0,special_id:4A500000}\r\n",
994 .soft_ver
= "soft_ver:1.9.1\n",
997 {"fs-uboot", 0x00000, 0x20000},
998 {"default-mac", 0x20000, 0x00200},
999 {"pin", 0x20200, 0x00100},
1000 {"product-info", 0x20300, 0x00200},
1001 {"device-id", 0x20500, 0x0fb00},
1002 {"firmware", 0x30000, 0x7a9400},
1003 {"soft-version", 0x7d9400, 0x00100},
1004 {"extra-para", 0x7d9500, 0x00100},
1005 {"support-list", 0x7d9600, 0x00200},
1006 {"profile", 0x7d9800, 0x03000},
1007 {"default-config", 0x7dc800, 0x03000},
1008 {"partition-table", 0x7df800, 0x00800},
1009 {"user-config", 0x7e0000, 0x0c000},
1010 {"certificate", 0x7ec000, 0x04000},
1011 {"radio", 0x7f0000, 0x10000},
1015 .first_sysupgrade_partition
= "os-image",
1016 .last_sysupgrade_partition
= "file-system",
1019 /** Firmware layout for the Archer C6 v2 (US) and A6 v2 (US/TW) */
1021 .id
= "ARCHER-C6-V2-US",
1025 "{product_name:Archer A6,product_ver:2.0.0,special_id:55530000}\n"
1026 "{product_name:Archer A6,product_ver:2.0.0,special_id:54570000}\n"
1027 "{product_name:Archer C6,product_ver:2.0.0,special_id:55530000}\n",
1029 .soft_ver
= "soft_ver:1.9.1\n",
1032 {"factory-boot", 0x00000, 0x20000},
1033 {"default-mac", 0x20000, 0x00200},
1034 {"pin", 0x20200, 0x00100},
1035 {"product-info", 0x20300, 0x00200},
1036 {"device-id", 0x20500, 0x0fb00},
1037 {"fs-uboot", 0x30000, 0x20000},
1038 {"firmware", 0x50000, 0xf89400},
1039 {"soft-version", 0xfd9400, 0x00100},
1040 {"extra-para", 0xfd9500, 0x00100},
1041 {"support-list", 0xfd9600, 0x00200},
1042 {"profile", 0xfd9800, 0x03000},
1043 {"default-config", 0xfdc800, 0x03000},
1044 {"partition-table", 0xfdf800, 0x00800},
1045 {"user-config", 0xfe0000, 0x0c000},
1046 {"certificate", 0xfec000, 0x04000},
1047 {"radio", 0xff0000, 0x10000},
1050 .first_sysupgrade_partition
= "os-image",
1051 .last_sysupgrade_partition
= "file-system",
1053 /** Firmware layout for the Archer C6 v3 */
1055 .id
= "ARCHER-C6-V3",
1059 "{product_name:Archer C6,product_ver:3.20,special_id:55530000}"
1060 "{product_name:Archer C6,product_ver:3.20,special_id:45550000}"
1061 "{product_name:Archer C6,product_ver:3.20,special_id:52550000}"
1062 "{product_name:Archer C6,product_ver:3.20,special_id:4A500000}"
1063 "{product_name:Archer C6,product_ver:3.20,special_id:4B520000}",
1065 .soft_ver
= "soft_ver:1.0.9\n",
1068 {"fs-uboot", 0x00000, 0x40000},
1069 {"firmware", 0x40000, 0xf60000},
1070 {"default-mac", 0xfa0000, 0x00200},
1071 {"pin", 0xfa0200, 0x00100},
1072 {"device-id", 0xfa0300, 0x00100},
1073 {"product-info", 0xfa0400, 0x0fc00},
1074 {"default-config", 0xfb0000, 0x08000},
1075 {"ap-def-config", 0xfb8000, 0x08000},
1076 {"user-config", 0xfc0000, 0x0a000},
1077 {"ag-config", 0xfca000, 0x04000},
1078 {"certificate", 0xfce000, 0x02000},
1079 {"ap-config", 0xfd0000, 0x06000},
1080 {"router-config", 0xfd6000, 0x06000},
1081 {"favicon", 0xfdc000, 0x02000},
1082 {"logo", 0xfde000, 0x02000},
1083 {"partition-table", 0xfe0000, 0x00800},
1084 {"soft-version", 0xfe0800, 0x00100},
1085 {"support-list", 0xfe0900, 0x00200},
1086 {"profile", 0xfe0b00, 0x03000},
1087 {"extra-para", 0xfe3b00, 0x00100},
1088 {"radio", 0xff0000, 0x10000},
1091 .first_sysupgrade_partition
= "os-image",
1092 .last_sysupgrade_partition
= "file-system",
1094 /** Firmware layout for the Archer A6 v3 */
1096 .id
= "ARCHER-A6-V3",
1100 "{product_name:Archer A6,product_ver:3.0.0,special_id:43410000}\n"
1101 "{product_name:Archer A6,product_ver:3.0.0,special_id:55530000}\n"
1102 "{product_name:Archer A6,product_ver:3.0.0,special_id:54570000}\n",
1104 .soft_ver
= "soft_ver:1.0.5\n",
1107 {"fs-uboot", 0x00000, 0x40000},
1108 {"firmware", 0x40000, 0xf60000},
1109 {"default-mac", 0xfa0000, 0x00200},
1110 {"pin", 0xfa0200, 0x00100},
1111 {"device-id", 0xfa0300, 0x00100},
1112 {"product-info", 0xfa0400, 0x0fc00},
1113 {"default-config", 0xfb0000, 0x08000},
1114 {"ap-def-config", 0xfb8000, 0x08000},
1115 {"user-config", 0xfc0000, 0x0a000},
1116 {"ag-config", 0xfca000, 0x04000},
1117 {"certificate", 0xfce000, 0x02000},
1118 {"ap-config", 0xfd0000, 0x06000},
1119 {"router-config", 0xfd6000, 0x06000},
1120 {"favicon", 0xfdc000, 0x02000},
1121 {"logo", 0xfde000, 0x02000},
1122 {"partition-table", 0xfe0000, 0x00800},
1123 {"soft-version", 0xfe0800, 0x00100},
1124 {"support-list", 0xfe0900, 0x00200},
1125 {"profile", 0xfe0b00, 0x03000},
1126 {"extra-para", 0xfe3b00, 0x00100},
1127 {"radio", 0xff0000, 0x10000},
1130 .first_sysupgrade_partition
= "os-image",
1131 .last_sysupgrade_partition
= "file-system",
1133 /** Firmware layout for the Archer C6U v1 */
1135 .id
= "ARCHER-C6U-V1",
1139 "{product_name:Archer C6U,product_ver:1.0.0,special_id:45550000}\n",
1141 .soft_ver
= "soft_ver:1.0.2\n",
1144 {"fs-uboot", 0x00000, 0x40000},
1145 {"firmware", 0x40000, 0xf60000},
1146 {"default-mac", 0xfa0000, 0x00200},
1147 {"pin", 0xfa0200, 0x00100},
1148 {"device-id", 0xfa0300, 0x00100},
1149 {"product-info", 0xfa0400, 0x0fc00},
1150 {"default-config", 0xfb0000, 0x08000},
1151 {"ap-def-config", 0xfb8000, 0x08000},
1152 {"user-config", 0xfc0000, 0x0c000},
1153 {"certificate", 0xfcc000, 0x04000},
1154 {"ap-config", 0xfd0000, 0x08000},
1155 {"router-config", 0xfd8000, 0x08000},
1156 {"partition-table", 0xfe0000, 0x00800},
1157 {"soft-version", 0xfe0800, 0x00100},
1158 {"support-list", 0xfe0900, 0x00200},
1159 {"profile", 0xfe0b00, 0x03000},
1160 {"extra-para", 0xfe3b00, 0x00100},
1161 {"radio", 0xff0000, 0x10000},
1164 .first_sysupgrade_partition
= "os-image",
1165 .last_sysupgrade_partition
= "file-system",
1167 /** Firmware layout for the C60v1 */
1169 .id
= "ARCHER-C60-V1",
1173 "{product_name:Archer C60,product_ver:1.0.0,special_id:00000000}\r\n"
1174 "{product_name:Archer C60,product_ver:1.0.0,special_id:45550000}\r\n"
1175 "{product_name:Archer C60,product_ver:1.0.0,special_id:55530000}\r\n",
1177 .soft_ver
= "soft_ver:1.0.0\n",
1180 {"fs-uboot", 0x00000, 0x10000},
1181 {"default-mac", 0x10000, 0x00200},
1182 {"pin", 0x10200, 0x00200},
1183 {"product-info", 0x10400, 0x00100},
1184 {"partition-table", 0x10500, 0x00800},
1185 {"soft-version", 0x11300, 0x00200},
1186 {"support-list", 0x11500, 0x00100},
1187 {"device-id", 0x11600, 0x00100},
1188 {"profile", 0x11700, 0x03900},
1189 {"default-config", 0x15000, 0x04000},
1190 {"user-config", 0x19000, 0x04000},
1191 {"firmware", 0x20000, 0x7c8000},
1192 {"certyficate", 0x7e8000, 0x08000},
1193 {"radio", 0x7f0000, 0x10000},
1197 .first_sysupgrade_partition
= "os-image",
1198 .last_sysupgrade_partition
= "file-system",
1201 /** Firmware layout for the C60v2 */
1203 .id
= "ARCHER-C60-V2",
1207 "{product_name:Archer C60,product_ver:2.0.0,special_id:42520000}\r\n"
1208 "{product_name:Archer C60,product_ver:2.0.0,special_id:45550000}\r\n"
1209 "{product_name:Archer C60,product_ver:2.0.0,special_id:55530000}\r\n",
1211 .soft_ver
= "soft_ver:2.0.0\n",
1214 {"factory-boot", 0x00000, 0x1fb00},
1215 {"default-mac", 0x1fb00, 0x00200},
1216 {"pin", 0x1fd00, 0x00100},
1217 {"product-info", 0x1fe00, 0x00100},
1218 {"device-id", 0x1ff00, 0x00100},
1219 {"fs-uboot", 0x20000, 0x10000},
1220 {"firmware", 0x30000, 0x7a0000},
1221 {"soft-version", 0x7d9500, 0x00100},
1222 {"support-list", 0x7d9600, 0x00100},
1223 {"extra-para", 0x7d9700, 0x00100},
1224 {"profile", 0x7d9800, 0x03000},
1225 {"default-config", 0x7dc800, 0x03000},
1226 {"partition-table", 0x7df800, 0x00800},
1227 {"user-config", 0x7e0000, 0x0c000},
1228 {"certificate", 0x7ec000, 0x04000},
1229 {"radio", 0x7f0000, 0x10000},
1233 .first_sysupgrade_partition
= "os-image",
1234 .last_sysupgrade_partition
= "file-system",
1237 /** Firmware layout for the C60v3 */
1239 .id
= "ARCHER-C60-V3",
1243 "{product_name:Archer C60,product_ver:3.0.0,special_id:42520000}\r\n"
1244 "{product_name:Archer C60,product_ver:3.0.0,special_id:45550000}\r\n"
1245 "{product_name:Archer C60,product_ver:3.0.0,special_id:55530000}\r\n",
1247 .soft_ver
= "soft_ver:3.0.0\n",
1250 {"factory-boot", 0x00000, 0x1fb00},
1251 {"default-mac", 0x1fb00, 0x00200},
1252 {"pin", 0x1fd00, 0x00100},
1253 {"product-info", 0x1fe00, 0x00100},
1254 {"device-id", 0x1ff00, 0x00100},
1255 {"fs-uboot", 0x20000, 0x10000},
1256 {"firmware", 0x30000, 0x7a0000},
1257 {"soft-version", 0x7d9500, 0x00100},
1258 {"support-list", 0x7d9600, 0x00100},
1259 {"extra-para", 0x7d9700, 0x00100},
1260 {"profile", 0x7d9800, 0x03000},
1261 {"default-config", 0x7dc800, 0x03000},
1262 {"partition-table", 0x7df800, 0x00800},
1263 {"user-config", 0x7e0000, 0x0c000},
1264 {"certificate", 0x7ec000, 0x04000},
1265 {"radio", 0x7f0000, 0x10000},
1269 .first_sysupgrade_partition
= "os-image",
1270 .last_sysupgrade_partition
= "file-system",
1273 /** Firmware layout for the C5 */
1275 .id
= "ARCHER-C5-V2",
1279 "{product_name:ArcherC5,product_ver:2.0.0,special_id:00000000}\r\n"
1280 "{product_name:ArcherC5,product_ver:2.0.0,special_id:55530000}\r\n"
1281 "{product_name:ArcherC5,product_ver:2.0.0,special_id:4A500000}\r\n", /* JP version */
1286 {"fs-uboot", 0x00000, 0x40000},
1287 {"os-image", 0x40000, 0x200000},
1288 {"file-system", 0x240000, 0xc00000},
1289 {"default-mac", 0xe40000, 0x00200},
1290 {"pin", 0xe40200, 0x00200},
1291 {"product-info", 0xe40400, 0x00200},
1292 {"partition-table", 0xe50000, 0x10000},
1293 {"soft-version", 0xe60000, 0x00200},
1294 {"support-list", 0xe61000, 0x0f000},
1295 {"profile", 0xe70000, 0x10000},
1296 {"default-config", 0xe80000, 0x10000},
1297 {"user-config", 0xe90000, 0x50000},
1298 {"log", 0xee0000, 0x100000},
1299 {"radio_bk", 0xfe0000, 0x10000},
1300 {"radio", 0xff0000, 0x10000},
1304 .first_sysupgrade_partition
= "os-image",
1305 .last_sysupgrade_partition
= "file-system"
1308 /** Firmware layout for the C7 */
1310 .id
= "ARCHER-C7-V4",
1313 "{product_name:Archer C7,product_ver:4.0.0,special_id:00000000}\n"
1314 "{product_name:Archer C7,product_ver:4.0.0,special_id:41550000}\n"
1315 "{product_name:Archer C7,product_ver:4.0.0,special_id:45550000}\n"
1316 "{product_name:Archer C7,product_ver:4.0.0,special_id:4B520000}\n"
1317 "{product_name:Archer C7,product_ver:4.0.0,special_id:42520000}\n"
1318 "{product_name:Archer C7,product_ver:4.0.0,special_id:4A500000}\n"
1319 "{product_name:Archer C7,product_ver:4.0.0,special_id:52550000}\n"
1320 "{product_name:Archer C7,product_ver:4.0.0,special_id:54570000}\n"
1321 "{product_name:Archer C7,product_ver:4.0.0,special_id:55530000}\n"
1322 "{product_name:Archer C7,product_ver:4.0.0,special_id:43410000}\n",
1324 .soft_ver
= "soft_ver:1.0.0\n",
1326 /* We're using a dynamic kernel/rootfs split here */
1328 {"factory-boot", 0x00000, 0x20000},
1329 {"fs-uboot", 0x20000, 0x20000},
1330 {"firmware", 0x40000, 0xEC0000}, /* Stock: name os-image base 0x40000 size 0x120000 */
1331 /* Stock: name file-system base 0x160000 size 0xda0000 */
1332 {"default-mac", 0xf00000, 0x00200},
1333 {"pin", 0xf00200, 0x00200},
1334 {"device-id", 0xf00400, 0x00100},
1335 {"product-info", 0xf00500, 0x0fb00},
1336 {"soft-version", 0xf10000, 0x00100},
1337 {"extra-para", 0xf11000, 0x01000},
1338 {"support-list", 0xf12000, 0x0a000},
1339 {"profile", 0xf1c000, 0x04000},
1340 {"default-config", 0xf20000, 0x10000},
1341 {"user-config", 0xf30000, 0x40000},
1342 {"qos-db", 0xf70000, 0x40000},
1343 {"certificate", 0xfb0000, 0x10000},
1344 {"partition-table", 0xfc0000, 0x10000},
1345 {"log", 0xfd0000, 0x20000},
1346 {"radio", 0xff0000, 0x10000},
1350 .first_sysupgrade_partition
= "os-image",
1351 .last_sysupgrade_partition
= "file-system",
1354 /** Firmware layout for the C7 v5*/
1356 .id
= "ARCHER-C7-V5",
1359 "{product_name:Archer C7,product_ver:5.0.0,special_id:00000000}\n"
1360 "{product_name:Archer C7,product_ver:5.0.0,special_id:45550000}\n"
1361 "{product_name:Archer C7,product_ver:5.0.0,special_id:55530000}\n"
1362 "{product_name:Archer C7,product_ver:5.0.0,special_id:43410000}\n"
1363 "{product_name:Archer C7,product_ver:5.0.0,special_id:4A500000}\n"
1364 "{product_name:Archer C7,product_ver:5.0.0,special_id:54570000}\n"
1365 "{product_name:Archer C7,product_ver:5.0.0,special_id:52550000}\n"
1366 "{product_name:Archer C7,product_ver:5.0.0,special_id:4B520000}\n",
1369 .soft_ver
= "soft_ver:7.0.0\n",
1371 /* We're using a dynamic kernel/rootfs split here */
1373 {"factory-boot", 0x00000, 0x20000},
1374 {"fs-uboot", 0x20000, 0x20000},
1375 {"partition-table", 0x40000, 0x10000},
1376 {"radio", 0x50000, 0x10000},
1377 {"default-mac", 0x60000, 0x00200},
1378 {"pin", 0x60200, 0x00200},
1379 {"device-id", 0x60400, 0x00100},
1380 {"product-info", 0x60500, 0x0fb00},
1381 {"soft-version", 0x70000, 0x01000},
1382 {"extra-para", 0x71000, 0x01000},
1383 {"support-list", 0x72000, 0x0a000},
1384 {"profile", 0x7c000, 0x04000},
1385 {"user-config", 0x80000, 0x40000},
1388 {"firmware", 0xc0000, 0xf00000}, /* Stock: name os-image base 0xc0000 size 0x120000 */
1389 /* Stock: name file-system base 0x1e0000 size 0xde0000 */
1391 {"log", 0xfc0000, 0x20000},
1392 {"certificate", 0xfe0000, 0x10000},
1393 {"default-config", 0xff0000, 0x10000},
1398 .first_sysupgrade_partition
= "os-image",
1399 .last_sysupgrade_partition
= "file-system",
1402 /** Firmware layout for the C9 */
1408 "{product_name:ArcherC9,"
1409 "product_ver:1.0.0,"
1410 "special_id:00000000}\n",
1415 {"fs-uboot", 0x00000, 0x40000},
1416 {"os-image", 0x40000, 0x200000},
1417 {"file-system", 0x240000, 0xc00000},
1418 {"default-mac", 0xe40000, 0x00200},
1419 {"pin", 0xe40200, 0x00200},
1420 {"product-info", 0xe40400, 0x00200},
1421 {"partition-table", 0xe50000, 0x10000},
1422 {"soft-version", 0xe60000, 0x00200},
1423 {"support-list", 0xe61000, 0x0f000},
1424 {"profile", 0xe70000, 0x10000},
1425 {"default-config", 0xe80000, 0x10000},
1426 {"user-config", 0xe90000, 0x50000},
1427 {"log", 0xee0000, 0x100000},
1428 {"radio_bk", 0xfe0000, 0x10000},
1429 {"radio", 0xff0000, 0x10000},
1433 .first_sysupgrade_partition
= "os-image",
1434 .last_sysupgrade_partition
= "file-system"
1437 /** Firmware layout for the EAP120 */
1440 .vendor
= "EAP120(TP-LINK|UN|N300-2):1.0\r\n",
1443 "EAP120(TP-LINK|UN|N300-2):1.0\r\n",
1448 {"fs-uboot", 0x00000, 0x20000},
1449 {"partition-table", 0x20000, 0x02000},
1450 {"default-mac", 0x30000, 0x00020},
1451 {"support-list", 0x31000, 0x00100},
1452 {"product-info", 0x31100, 0x00100},
1453 {"soft-version", 0x32000, 0x00100},
1454 {"os-image", 0x40000, 0x180000},
1455 {"file-system", 0x1c0000, 0x600000},
1456 {"user-config", 0x7c0000, 0x10000},
1457 {"backup-config", 0x7d0000, 0x10000},
1458 {"log", 0x7e0000, 0x10000},
1459 {"radio", 0x7f0000, 0x10000},
1463 .first_sysupgrade_partition
= "os-image",
1464 .last_sysupgrade_partition
= "file-system"
1467 /** Firmware layout for the EAP225-Outdoor v1 */
1469 .id
= "EAP225-OUTDOOR-V1",
1472 "EAP225-Outdoor(TP-Link|UN|AC1200-D):1.0\r\n",
1473 .part_trail
= PART_TRAIL_NONE
,
1475 .soft_ver_compat_level
= 1,
1478 {"fs-uboot", 0x00000, 0x20000},
1479 {"partition-table", 0x20000, 0x02000},
1480 {"default-mac", 0x30000, 0x01000},
1481 {"support-list", 0x31000, 0x00100},
1482 {"product-info", 0x31100, 0x00400},
1483 {"soft-version", 0x32000, 0x00100},
1484 {"firmware", 0x40000, 0xd80000},
1485 {"user-config", 0xdc0000, 0x30000},
1486 {"mutil-log", 0xf30000, 0x80000},
1487 {"oops", 0xfb0000, 0x40000},
1488 {"radio", 0xff0000, 0x10000},
1492 .first_sysupgrade_partition
= "os-image",
1493 .last_sysupgrade_partition
= "file-system"
1496 /** Firmware layout for the EAP225 v3 */
1501 "EAP225(TP-Link|UN|AC1350-D):3.0\r\n",
1502 .part_trail
= PART_TRAIL_NONE
,
1504 .soft_ver_compat_level
= 1,
1507 {"fs-uboot", 0x00000, 0x20000},
1508 {"partition-table", 0x20000, 0x02000},
1509 {"default-mac", 0x30000, 0x01000},
1510 {"support-list", 0x31000, 0x00100},
1511 {"product-info", 0x31100, 0x00400},
1512 {"soft-version", 0x32000, 0x00100},
1513 {"firmware", 0x40000, 0xd80000},
1514 {"user-config", 0xdc0000, 0x30000},
1515 {"mutil-log", 0xf30000, 0x80000},
1516 {"oops", 0xfb0000, 0x40000},
1517 {"radio", 0xff0000, 0x10000},
1521 .first_sysupgrade_partition
= "os-image",
1522 .last_sysupgrade_partition
= "file-system"
1525 /** Firmware layout for the EAP225-Wall v2 */
1527 .id
= "EAP225-WALL-V2",
1530 "EAP225-Wall(TP-Link|UN|AC1200-D):2.0\r\n",
1531 .part_trail
= PART_TRAIL_NONE
,
1533 .soft_ver_compat_level
= 1,
1536 {"fs-uboot", 0x00000, 0x20000},
1537 {"partition-table", 0x20000, 0x02000},
1538 {"default-mac", 0x30000, 0x01000},
1539 {"support-list", 0x31000, 0x00100},
1540 {"product-info", 0x31100, 0x00400},
1541 {"soft-version", 0x32000, 0x00100},
1542 {"firmware", 0x40000, 0xd80000},
1543 {"user-config", 0xdc0000, 0x30000},
1544 {"mutil-log", 0xf30000, 0x80000},
1545 {"oops", 0xfb0000, 0x40000},
1546 {"radio", 0xff0000, 0x10000},
1550 .first_sysupgrade_partition
= "os-image",
1551 .last_sysupgrade_partition
= "file-system"
1554 /** Firmware layout for the EAP235-Wall v1 */
1556 .id
= "EAP235-WALL-V1",
1559 "EAP235-Wall(TP-Link|UN|AC1200-D):1.0\r\n",
1560 .part_trail
= PART_TRAIL_NONE
,
1562 .soft_ver_compat_level
= 1,
1565 {"fs-uboot", 0x00000, 0x80000},
1566 {"partition-table", 0x80000, 0x02000},
1567 {"default-mac", 0x90000, 0x01000},
1568 {"support-list", 0x91000, 0x00100},
1569 {"product-info", 0x91100, 0x00400},
1570 {"soft-version", 0x92000, 0x00100},
1571 {"firmware", 0xa0000, 0xd20000},
1572 {"user-config", 0xdc0000, 0x30000},
1573 {"mutil-log", 0xf30000, 0x80000},
1574 {"oops", 0xfb0000, 0x40000},
1575 {"radio", 0xff0000, 0x10000},
1579 .first_sysupgrade_partition
= "os-image",
1580 .last_sysupgrade_partition
= "file-system"
1583 /** Firmware layout for the EAP245 v1 */
1588 "EAP245(TP-LINK|UN|AC1750-D):1.0\r\n",
1589 .part_trail
= PART_TRAIL_NONE
,
1593 {"fs-uboot", 0x00000, 0x20000},
1594 {"partition-table", 0x20000, 0x02000},
1595 {"default-mac", 0x30000, 0x01000},
1596 {"support-list", 0x31000, 0x00100},
1597 {"product-info", 0x31100, 0x00400},
1598 {"soft-version", 0x32000, 0x00100},
1599 {"firmware", 0x40000, 0xd80000},
1600 {"user-config", 0xdc0000, 0x30000},
1601 {"radio", 0xff0000, 0x10000},
1605 .first_sysupgrade_partition
= "os-image",
1606 .last_sysupgrade_partition
= "file-system"
1609 /** Firmware layout for the EAP245 v3 */
1614 "EAP245(TP-Link|UN|AC1750-D):3.0\r\n",
1615 .part_trail
= PART_TRAIL_NONE
,
1617 .soft_ver_compat_level
= 1,
1619 /** Firmware partition with dynamic kernel/rootfs split */
1621 {"factroy-boot", 0x00000, 0x40000},
1622 {"fs-uboot", 0x40000, 0x40000},
1623 {"partition-table", 0x80000, 0x10000},
1624 {"default-mac", 0x90000, 0x01000},
1625 {"support-list", 0x91000, 0x00100},
1626 {"product-info", 0x91100, 0x00400},
1627 {"soft-version", 0x92000, 0x00100},
1628 {"radio", 0xa0000, 0x10000},
1629 {"extra-para", 0xb0000, 0x10000},
1630 {"firmware", 0xc0000, 0xe40000},
1631 {"config", 0xf00000, 0x30000},
1632 {"mutil-log", 0xf30000, 0x80000},
1633 {"oops", 0xfb0000, 0x40000},
1637 .first_sysupgrade_partition
= "os-image",
1638 .last_sysupgrade_partition
= "file-system"
1641 /** Firmware layout for the TL-WA850RE v2 */
1643 .id
= "TLWA850REV2",
1647 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:55530000}\n"
1648 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:00000000}\n"
1649 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:55534100}\n"
1650 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:45550000}\n"
1651 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:4B520000}\n"
1652 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:42520000}\n"
1653 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:4A500000}\n"
1654 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:43410000}\n"
1655 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:41550000}\n"
1656 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:52550000}\n",
1661 576KB were moved from file-system to os-image
1662 in comparison to the stock image
1665 {"fs-uboot", 0x00000, 0x20000},
1666 {"firmware", 0x20000, 0x390000},
1667 {"partition-table", 0x3b0000, 0x02000},
1668 {"default-mac", 0x3c0000, 0x00020},
1669 {"pin", 0x3c0100, 0x00020},
1670 {"product-info", 0x3c1000, 0x01000},
1671 {"soft-version", 0x3c2000, 0x00100},
1672 {"support-list", 0x3c3000, 0x01000},
1673 {"profile", 0x3c4000, 0x08000},
1674 {"user-config", 0x3d0000, 0x10000},
1675 {"default-config", 0x3e0000, 0x10000},
1676 {"radio", 0x3f0000, 0x10000},
1680 .first_sysupgrade_partition
= "os-image",
1681 .last_sysupgrade_partition
= "file-system"
1684 /** Firmware layout for the TL-WA855RE v1 */
1686 .id
= "TLWA855REV1",
1690 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:00000000}\n"
1691 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:55530000}\n"
1692 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:45550000}\n"
1693 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:4B520000}\n"
1694 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:42520000}\n"
1695 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:4A500000}\n"
1696 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:43410000}\n"
1697 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:41550000}\n"
1698 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:52550000}\n",
1703 {"fs-uboot", 0x00000, 0x20000},
1704 {"os-image", 0x20000, 0x150000},
1705 {"file-system", 0x170000, 0x240000},
1706 {"partition-table", 0x3b0000, 0x02000},
1707 {"default-mac", 0x3c0000, 0x00020},
1708 {"pin", 0x3c0100, 0x00020},
1709 {"product-info", 0x3c1000, 0x01000},
1710 {"soft-version", 0x3c2000, 0x00100},
1711 {"support-list", 0x3c3000, 0x01000},
1712 {"profile", 0x3c4000, 0x08000},
1713 {"user-config", 0x3d0000, 0x10000},
1714 {"default-config", 0x3e0000, 0x10000},
1715 {"radio", 0x3f0000, 0x10000},
1719 .first_sysupgrade_partition
= "os-image",
1720 .last_sysupgrade_partition
= "file-system"
1723 /** Firmware layout for the TL-WPA8630P v2 (EU)*/
1725 .id
= "TL-WPA8630P-V2.0-EU",
1729 "{product_name:TL-WPA8630P,product_ver:2.0.0,special_id:45550000}\n",
1734 {"factory-uboot", 0x00000, 0x20000},
1735 {"fs-uboot", 0x20000, 0x20000},
1736 {"firmware", 0x40000, 0x5e0000},
1737 {"partition-table", 0x620000, 0x02000},
1738 {"default-mac", 0x630000, 0x00020},
1739 {"pin", 0x630100, 0x00020},
1740 {"device-id", 0x630200, 0x00030},
1741 {"product-info", 0x631100, 0x01000},
1742 {"extra-para", 0x632100, 0x01000},
1743 {"soft-version", 0x640000, 0x01000},
1744 {"support-list", 0x641000, 0x01000},
1745 {"profile", 0x642000, 0x08000},
1746 {"user-config", 0x650000, 0x10000},
1747 {"default-config", 0x660000, 0x10000},
1748 {"default-nvm", 0x670000, 0xc0000},
1749 {"default-pib", 0x730000, 0x40000},
1750 {"radio", 0x7f0000, 0x10000},
1754 .first_sysupgrade_partition
= "os-image",
1755 .last_sysupgrade_partition
= "file-system"
1758 /** Firmware layout for the TL-WPA8630P v2 (INT)*/
1760 .id
= "TL-WPA8630P-V2-INT",
1764 "{product_name:TL-WPA8630P,product_ver:2.0.0,special_id:41550000}\n"
1765 "{product_name:TL-WPA8630P,product_ver:2.0.0,special_id:44450000}\n"
1766 "{product_name:TL-WPA8630P,product_ver:2.1.0,special_id:41550000}\n",
1771 {"factory-uboot", 0x00000, 0x20000},
1772 {"fs-uboot", 0x20000, 0x20000},
1773 {"firmware", 0x40000, 0x5e0000},
1774 {"partition-table", 0x620000, 0x02000},
1775 {"extra-para", 0x632100, 0x01000},
1776 {"soft-version", 0x640000, 0x01000},
1777 {"support-list", 0x641000, 0x01000},
1778 {"profile", 0x642000, 0x08000},
1779 {"user-config", 0x650000, 0x10000},
1780 {"default-config", 0x660000, 0x10000},
1781 {"default-nvm", 0x670000, 0xc0000},
1782 {"default-pib", 0x730000, 0x40000},
1783 {"default-mac", 0x7e0000, 0x00020},
1784 {"pin", 0x7e0100, 0x00020},
1785 {"device-id", 0x7e0200, 0x00030},
1786 {"product-info", 0x7e1100, 0x01000},
1787 {"radio", 0x7f0000, 0x10000},
1791 .first_sysupgrade_partition
= "os-image",
1792 .last_sysupgrade_partition
= "file-system"
1795 /** Firmware layout for the TL-WPA8630P v2.1 (EU)*/
1797 .id
= "TL-WPA8630P-V2.1-EU",
1801 "{product_name:TL-WPA8630P,product_ver:2.1.0,special_id:45550000}\n",
1806 {"factory-uboot", 0x00000, 0x20000},
1807 {"fs-uboot", 0x20000, 0x20000},
1808 {"firmware", 0x40000, 0x5e0000},
1809 {"extra-para", 0x680000, 0x01000},
1810 {"product-info", 0x690000, 0x01000},
1811 {"partition-table", 0x6a0000, 0x02000},
1812 {"soft-version", 0x6b0000, 0x01000},
1813 {"support-list", 0x6b1000, 0x01000},
1814 {"profile", 0x6b2000, 0x08000},
1815 {"user-config", 0x6c0000, 0x10000},
1816 {"default-config", 0x6d0000, 0x10000},
1817 {"default-nvm", 0x6e0000, 0xc0000},
1818 {"default-pib", 0x7a0000, 0x40000},
1819 {"default-mac", 0x7e0000, 0x00020},
1820 {"pin", 0x7e0100, 0x00020},
1821 {"device-id", 0x7e0200, 0x00030},
1822 {"radio", 0x7f0000, 0x10000},
1826 .first_sysupgrade_partition
= "os-image",
1827 .last_sysupgrade_partition
= "file-system"
1830 /** Firmware layout for the TL-WR1043 v5 */
1832 .id
= "TLWR1043NV5",
1836 "{product_name:TL-WR1043N,product_ver:5.0.0,special_id:45550000}\n"
1837 "{product_name:TL-WR1043N,product_ver:5.0.0,special_id:55530000}\n",
1839 .soft_ver
= "soft_ver:1.0.0\n",
1841 {"factory-boot", 0x00000, 0x20000},
1842 {"fs-uboot", 0x20000, 0x20000},
1843 {"firmware", 0x40000, 0xec0000},
1844 {"default-mac", 0xf00000, 0x00200},
1845 {"pin", 0xf00200, 0x00200},
1846 {"device-id", 0xf00400, 0x00100},
1847 {"product-info", 0xf00500, 0x0fb00},
1848 {"soft-version", 0xf10000, 0x01000},
1849 {"extra-para", 0xf11000, 0x01000},
1850 {"support-list", 0xf12000, 0x0a000},
1851 {"profile", 0xf1c000, 0x04000},
1852 {"default-config", 0xf20000, 0x10000},
1853 {"user-config", 0xf30000, 0x40000},
1854 {"qos-db", 0xf70000, 0x40000},
1855 {"certificate", 0xfb0000, 0x10000},
1856 {"partition-table", 0xfc0000, 0x10000},
1857 {"log", 0xfd0000, 0x20000},
1858 {"radio", 0xff0000, 0x10000},
1861 .first_sysupgrade_partition
= "os-image",
1862 .last_sysupgrade_partition
= "file-system"
1865 /** Firmware layout for the TL-WR1043 v4 */
1867 .id
= "TLWR1043NDV4",
1871 "{product_name:TL-WR1043ND,product_ver:4.0.0,special_id:45550000}\n",
1875 /* We're using a dynamic kernel/rootfs split here */
1877 {"fs-uboot", 0x00000, 0x20000},
1878 {"firmware", 0x20000, 0xf30000},
1879 {"default-mac", 0xf50000, 0x00200},
1880 {"pin", 0xf50200, 0x00200},
1881 {"product-info", 0xf50400, 0x0fc00},
1882 {"soft-version", 0xf60000, 0x0b000},
1883 {"support-list", 0xf6b000, 0x04000},
1884 {"profile", 0xf70000, 0x04000},
1885 {"default-config", 0xf74000, 0x0b000},
1886 {"user-config", 0xf80000, 0x40000},
1887 {"partition-table", 0xfc0000, 0x10000},
1888 {"log", 0xfd0000, 0x20000},
1889 {"radio", 0xff0000, 0x10000},
1893 .first_sysupgrade_partition
= "os-image",
1894 .last_sysupgrade_partition
= "file-system"
1897 /** Firmware layout for the TL-WR902AC v1 */
1899 .id
= "TL-WR902AC-V1",
1903 "{product_name:TL-WR902AC,product_ver:1.0.0,special_id:45550000}\n"
1904 "{product_name:TL-WR902AC,product_ver:1.0.0,special_id:55530000}\n",
1909 384KB were moved from file-system to os-image
1910 in comparison to the stock image
1913 {"fs-uboot", 0x00000, 0x20000},
1914 {"firmware", 0x20000, 0x730000},
1915 {"default-mac", 0x750000, 0x00200},
1916 {"pin", 0x750200, 0x00200},
1917 {"product-info", 0x750400, 0x0fc00},
1918 {"soft-version", 0x760000, 0x0b000},
1919 {"support-list", 0x76b000, 0x04000},
1920 {"profile", 0x770000, 0x04000},
1921 {"default-config", 0x774000, 0x0b000},
1922 {"user-config", 0x780000, 0x40000},
1923 {"partition-table", 0x7c0000, 0x10000},
1924 {"log", 0x7d0000, 0x20000},
1925 {"radio", 0x7f0000, 0x10000},
1929 .first_sysupgrade_partition
= "os-image",
1930 .last_sysupgrade_partition
= "file-system",
1933 /** Firmware layout for the TL-WR941HP v1 */
1935 .id
= "TL-WR941HP-V1",
1939 "{product_name:TL-WR941HP,product_ver:1.0.0,special_id:00000000}\n",
1944 {"fs-uboot", 0x00000, 0x20000},
1945 {"firmware", 0x20000, 0x730000},
1946 {"default-mac", 0x750000, 0x00200},
1947 {"pin", 0x750200, 0x00200},
1948 {"product-info", 0x750400, 0x0fc00},
1949 {"soft-version", 0x760000, 0x0b000},
1950 {"support-list", 0x76b000, 0x04000},
1951 {"profile", 0x770000, 0x04000},
1952 {"default-config", 0x774000, 0x0b000},
1953 {"user-config", 0x780000, 0x40000},
1954 {"partition-table", 0x7c0000, 0x10000},
1955 {"log", 0x7d0000, 0x20000},
1956 {"radio", 0x7f0000, 0x10000},
1960 .first_sysupgrade_partition
= "os-image",
1961 .last_sysupgrade_partition
= "file-system",
1964 /** Firmware layout for the TL-WR942N V1 */
1970 "{product_name:TL-WR942N,product_ver:1.0.0,special_id:00000000}\r\n"
1971 "{product_name:TL-WR942N,product_ver:1.0.0,special_id:52550000}\r\n",
1976 {"fs-uboot", 0x00000, 0x20000},
1977 {"firmware", 0x20000, 0xe20000},
1978 {"default-mac", 0xe40000, 0x00200},
1979 {"pin", 0xe40200, 0x00200},
1980 {"product-info", 0xe40400, 0x0fc00},
1981 {"partition-table", 0xe50000, 0x10000},
1982 {"soft-version", 0xe60000, 0x10000},
1983 {"support-list", 0xe70000, 0x10000},
1984 {"profile", 0xe80000, 0x10000},
1985 {"default-config", 0xe90000, 0x10000},
1986 {"user-config", 0xea0000, 0x40000},
1987 {"qos-db", 0xee0000, 0x40000},
1988 {"certificate", 0xf20000, 0x10000},
1989 {"usb-config", 0xfb0000, 0x10000},
1990 {"log", 0xfc0000, 0x20000},
1991 {"radio-bk", 0xfe0000, 0x10000},
1992 {"radio", 0xff0000, 0x10000},
1996 .first_sysupgrade_partition
= "os-image",
1997 .last_sysupgrade_partition
= "file-system",
2000 /** Firmware layout for the RE200 v2 */
2006 "{product_name:RE200,product_ver:2.0.0,special_id:00000000}\n"
2007 "{product_name:RE200,product_ver:2.0.0,special_id:41520000}\n"
2008 "{product_name:RE200,product_ver:2.0.0,special_id:41550000}\n"
2009 "{product_name:RE200,product_ver:2.0.0,special_id:42520000}\n"
2010 "{product_name:RE200,product_ver:2.0.0,special_id:43410000}\n"
2011 "{product_name:RE200,product_ver:2.0.0,special_id:45530000}\n"
2012 "{product_name:RE200,product_ver:2.0.0,special_id:45550000}\n"
2013 "{product_name:RE200,product_ver:2.0.0,special_id:49440000}\n"
2014 "{product_name:RE200,product_ver:2.0.0,special_id:4a500000}\n"
2015 "{product_name:RE200,product_ver:2.0.0,special_id:4b520000}\n"
2016 "{product_name:RE200,product_ver:2.0.0,special_id:52550000}\n"
2017 "{product_name:RE200,product_ver:2.0.0,special_id:54570000}\n"
2018 "{product_name:RE200,product_ver:2.0.0,special_id:55530000}\n",
2023 {"fs-uboot", 0x00000, 0x20000},
2024 {"firmware", 0x20000, 0x7a0000},
2025 {"partition-table", 0x7c0000, 0x02000},
2026 {"default-mac", 0x7c2000, 0x00020},
2027 {"pin", 0x7c2100, 0x00020},
2028 {"product-info", 0x7c3100, 0x01000},
2029 {"soft-version", 0x7c4200, 0x01000},
2030 {"support-list", 0x7c5200, 0x01000},
2031 {"profile", 0x7c6200, 0x08000},
2032 {"config-info", 0x7ce200, 0x00400},
2033 {"user-config", 0x7d0000, 0x10000},
2034 {"default-config", 0x7e0000, 0x10000},
2035 {"radio", 0x7f0000, 0x10000},
2039 .first_sysupgrade_partition
= "os-image",
2040 .last_sysupgrade_partition
= "file-system"
2043 /** Firmware layout for the RE200 v3 */
2049 "{product_name:RE200,product_ver:3.0.0,special_id:00000000}\n"
2050 "{product_name:RE200,product_ver:3.0.0,special_id:41520000}\n"
2051 "{product_name:RE200,product_ver:3.0.0,special_id:41550000}\n"
2052 "{product_name:RE200,product_ver:3.0.0,special_id:42520000}\n"
2053 "{product_name:RE200,product_ver:3.0.0,special_id:43410000}\n"
2054 "{product_name:RE200,product_ver:3.0.0,special_id:45470000}\n"
2055 "{product_name:RE200,product_ver:3.0.0,special_id:45530000}\n"
2056 "{product_name:RE200,product_ver:3.0.0,special_id:45550000}\n"
2057 "{product_name:RE200,product_ver:3.0.0,special_id:49440000}\n"
2058 "{product_name:RE200,product_ver:3.0.0,special_id:4A500000}\n"
2059 "{product_name:RE200,product_ver:3.0.0,special_id:4B520000}\n"
2060 "{product_name:RE200,product_ver:3.0.0,special_id:52550000}\n"
2061 "{product_name:RE200,product_ver:3.0.0,special_id:54570000}\n"
2062 "{product_name:RE200,product_ver:3.0.0,special_id:55530000}\n",
2067 {"fs-uboot", 0x00000, 0x20000},
2068 {"firmware", 0x20000, 0x7a0000},
2069 {"partition-table", 0x7c0000, 0x02000},
2070 {"default-mac", 0x7c2000, 0x00020},
2071 {"pin", 0x7c2100, 0x00020},
2072 {"product-info", 0x7c3100, 0x01000},
2073 {"soft-version", 0x7c4200, 0x01000},
2074 {"support-list", 0x7c5200, 0x01000},
2075 {"profile", 0x7c6200, 0x08000},
2076 {"config-info", 0x7ce200, 0x00400},
2077 {"user-config", 0x7d0000, 0x10000},
2078 {"default-config", 0x7e0000, 0x10000},
2079 {"radio", 0x7f0000, 0x10000},
2083 .first_sysupgrade_partition
= "os-image",
2084 .last_sysupgrade_partition
= "file-system"
2087 /** Firmware layout for the RE200 v4 */
2093 "{product_name:RE200,product_ver:4.0.0,special_id:00000000}\n"
2094 "{product_name:RE200,product_ver:4.0.0,special_id:45550000}\n"
2095 "{product_name:RE200,product_ver:4.0.0,special_id:4A500000}\n"
2096 "{product_name:RE200,product_ver:4.0.0,special_id:4B520000}\n"
2097 "{product_name:RE200,product_ver:4.0.0,special_id:43410000}\n"
2098 "{product_name:RE200,product_ver:4.0.0,special_id:41550000}\n"
2099 "{product_name:RE200,product_ver:4.0.0,special_id:42520000}\n"
2100 "{product_name:RE200,product_ver:4.0.0,special_id:55530000}\n"
2101 "{product_name:RE200,product_ver:4.0.0,special_id:41520000}\n"
2102 "{product_name:RE200,product_ver:4.0.0,special_id:52550000}\n"
2103 "{product_name:RE200,product_ver:4.0.0,special_id:54570000}\n"
2104 "{product_name:RE200,product_ver:4.0.0,special_id:45530000}\n"
2105 "{product_name:RE200,product_ver:4.0.0,special_id:49440000}\n"
2106 "{product_name:RE200,product_ver:4.0.0,special_id:45470000}\n",
2108 .soft_ver
= "soft_ver:1.1.0\n",
2111 {"fs-uboot", 0x00000, 0x20000},
2112 {"firmware", 0x20000, 0x7a0000},
2113 {"partition-table", 0x7c0000, 0x02000},
2114 {"default-mac", 0x7c2000, 0x00020},
2115 {"pin", 0x7c2100, 0x00020},
2116 {"product-info", 0x7c3100, 0x01000},
2117 {"soft-version", 0x7c4200, 0x01000},
2118 {"support-list", 0x7c5200, 0x01000},
2119 {"profile", 0x7c6200, 0x08000},
2120 {"config-info", 0x7ce200, 0x00400},
2121 {"user-config", 0x7d0000, 0x10000},
2122 {"default-config", 0x7e0000, 0x10000},
2123 {"radio", 0x7f0000, 0x10000},
2127 .first_sysupgrade_partition
= "os-image",
2128 .last_sysupgrade_partition
= "file-system"
2131 /** Firmware layout for the RE220 v2 */
2137 "{product_name:RE220,product_ver:2.0.0,special_id:00000000}\n"
2138 "{product_name:RE220,product_ver:2.0.0,special_id:41520000}\n"
2139 "{product_name:RE220,product_ver:2.0.0,special_id:41550000}\n"
2140 "{product_name:RE220,product_ver:2.0.0,special_id:42520000}\n"
2141 "{product_name:RE220,product_ver:2.0.0,special_id:43410000}\n"
2142 "{product_name:RE220,product_ver:2.0.0,special_id:45530000}\n"
2143 "{product_name:RE220,product_ver:2.0.0,special_id:45550000}\n"
2144 "{product_name:RE220,product_ver:2.0.0,special_id:49440000}\n"
2145 "{product_name:RE220,product_ver:2.0.0,special_id:4a500000}\n"
2146 "{product_name:RE220,product_ver:2.0.0,special_id:4b520000}\n"
2147 "{product_name:RE220,product_ver:2.0.0,special_id:52550000}\n"
2148 "{product_name:RE220,product_ver:2.0.0,special_id:54570000}\n"
2149 "{product_name:RE220,product_ver:2.0.0,special_id:55530000}\n",
2154 {"fs-uboot", 0x00000, 0x20000},
2155 {"firmware", 0x20000, 0x7a0000},
2156 {"partition-table", 0x7c0000, 0x02000},
2157 {"default-mac", 0x7c2000, 0x00020},
2158 {"pin", 0x7c2100, 0x00020},
2159 {"product-info", 0x7c3100, 0x01000},
2160 {"soft-version", 0x7c4200, 0x01000},
2161 {"support-list", 0x7c5200, 0x01000},
2162 {"profile", 0x7c6200, 0x08000},
2163 {"config-info", 0x7ce200, 0x00400},
2164 {"user-config", 0x7d0000, 0x10000},
2165 {"default-config", 0x7e0000, 0x10000},
2166 {"radio", 0x7f0000, 0x10000},
2170 .first_sysupgrade_partition
= "os-image",
2171 .last_sysupgrade_partition
= "file-system"
2174 /** Firmware layout for the RE305 v1 */
2180 "{product_name:RE305,product_ver:1.0.0,special_id:45550000}\n"
2181 "{product_name:RE305,product_ver:1.0.0,special_id:55530000}\n"
2182 "{product_name:RE305,product_ver:1.0.0,special_id:4a500000}\n"
2183 "{product_name:RE305,product_ver:1.0.0,special_id:42520000}\n"
2184 "{product_name:RE305,product_ver:1.0.0,special_id:4b520000}\n"
2185 "{product_name:RE305,product_ver:1.0.0,special_id:41550000}\n"
2186 "{product_name:RE305,product_ver:1.0.0,special_id:43410000}\n",
2191 {"fs-uboot", 0x00000, 0x20000},
2192 {"firmware", 0x20000, 0x5e0000},
2193 {"partition-table", 0x600000, 0x02000},
2194 {"default-mac", 0x610000, 0x00020},
2195 {"pin", 0x610100, 0x00020},
2196 {"product-info", 0x611100, 0x01000},
2197 {"soft-version", 0x620000, 0x01000},
2198 {"support-list", 0x621000, 0x01000},
2199 {"profile", 0x622000, 0x08000},
2200 {"user-config", 0x630000, 0x10000},
2201 {"default-config", 0x640000, 0x10000},
2202 {"radio", 0x7f0000, 0x10000},
2206 .first_sysupgrade_partition
= "os-image",
2207 .last_sysupgrade_partition
= "file-system"
2210 /** Firmware layout for the RE350 v1 */
2216 "{product_name:RE350,product_ver:1.0.0,special_id:45550000}\n"
2217 "{product_name:RE350,product_ver:1.0.0,special_id:00000000}\n"
2218 "{product_name:RE350,product_ver:1.0.0,special_id:41550000}\n"
2219 "{product_name:RE350,product_ver:1.0.0,special_id:55530000}\n"
2220 "{product_name:RE350,product_ver:1.0.0,special_id:43410000}\n"
2221 "{product_name:RE350,product_ver:1.0.0,special_id:4b520000}\n"
2222 "{product_name:RE350,product_ver:1.0.0,special_id:4a500000}\n",
2226 /** We're using a dynamic kernel/rootfs split here */
2228 {"fs-uboot", 0x00000, 0x20000},
2229 {"firmware", 0x20000, 0x5e0000},
2230 {"partition-table", 0x600000, 0x02000},
2231 {"default-mac", 0x610000, 0x00020},
2232 {"pin", 0x610100, 0x00020},
2233 {"product-info", 0x611100, 0x01000},
2234 {"soft-version", 0x620000, 0x01000},
2235 {"support-list", 0x621000, 0x01000},
2236 {"profile", 0x622000, 0x08000},
2237 {"user-config", 0x630000, 0x10000},
2238 {"default-config", 0x640000, 0x10000},
2239 {"radio", 0x7f0000, 0x10000},
2243 .first_sysupgrade_partition
= "os-image",
2244 .last_sysupgrade_partition
= "file-system"
2247 /** Firmware layout for the RE350K v1 */
2253 "{product_name:RE350K,product_ver:1.0.0,special_id:00000000,product_region:US}\n",
2257 /** We're using a dynamic kernel/rootfs split here */
2259 {"fs-uboot", 0x00000, 0x20000},
2260 {"firmware", 0x20000, 0xd70000},
2261 {"partition-table", 0xd90000, 0x02000},
2262 {"default-mac", 0xda0000, 0x00020},
2263 {"pin", 0xda0100, 0x00020},
2264 {"product-info", 0xda1100, 0x01000},
2265 {"soft-version", 0xdb0000, 0x01000},
2266 {"support-list", 0xdb1000, 0x01000},
2267 {"profile", 0xdb2000, 0x08000},
2268 {"user-config", 0xdc0000, 0x10000},
2269 {"default-config", 0xdd0000, 0x10000},
2270 {"device-id", 0xde0000, 0x00108},
2271 {"radio", 0xff0000, 0x10000},
2275 .first_sysupgrade_partition
= "os-image",
2276 .last_sysupgrade_partition
= "file-system"
2279 /** Firmware layout for the RE355 */
2285 "{product_name:RE355,product_ver:1.0.0,special_id:00000000}\r\n"
2286 "{product_name:RE355,product_ver:1.0.0,special_id:55530000}\r\n"
2287 "{product_name:RE355,product_ver:1.0.0,special_id:45550000}\r\n"
2288 "{product_name:RE355,product_ver:1.0.0,special_id:4A500000}\r\n"
2289 "{product_name:RE355,product_ver:1.0.0,special_id:43410000}\r\n"
2290 "{product_name:RE355,product_ver:1.0.0,special_id:41550000}\r\n"
2291 "{product_name:RE355,product_ver:1.0.0,special_id:4B520000}\r\n"
2292 "{product_name:RE355,product_ver:1.0.0,special_id:55534100}\r\n",
2296 /* We're using a dynamic kernel/rootfs split here */
2298 {"fs-uboot", 0x00000, 0x20000},
2299 {"firmware", 0x20000, 0x5e0000},
2300 {"partition-table", 0x600000, 0x02000},
2301 {"default-mac", 0x610000, 0x00020},
2302 {"pin", 0x610100, 0x00020},
2303 {"product-info", 0x611100, 0x01000},
2304 {"soft-version", 0x620000, 0x01000},
2305 {"support-list", 0x621000, 0x01000},
2306 {"profile", 0x622000, 0x08000},
2307 {"user-config", 0x630000, 0x10000},
2308 {"default-config", 0x640000, 0x10000},
2309 {"radio", 0x7f0000, 0x10000},
2313 .first_sysupgrade_partition
= "os-image",
2314 .last_sysupgrade_partition
= "file-system"
2317 /** Firmware layout for the RE450 */
2323 "{product_name:RE450,product_ver:1.0.0,special_id:00000000}\r\n"
2324 "{product_name:RE450,product_ver:1.0.0,special_id:55530000}\r\n"
2325 "{product_name:RE450,product_ver:1.0.0,special_id:45550000}\r\n"
2326 "{product_name:RE450,product_ver:1.0.0,special_id:4A500000}\r\n"
2327 "{product_name:RE450,product_ver:1.0.0,special_id:43410000}\r\n"
2328 "{product_name:RE450,product_ver:1.0.0,special_id:41550000}\r\n"
2329 "{product_name:RE450,product_ver:1.0.0,special_id:4B520000}\r\n"
2330 "{product_name:RE450,product_ver:1.0.0,special_id:55534100}\r\n",
2334 /** We're using a dynamic kernel/rootfs split here */
2336 {"fs-uboot", 0x00000, 0x20000},
2337 {"firmware", 0x20000, 0x5e0000},
2338 {"partition-table", 0x600000, 0x02000},
2339 {"default-mac", 0x610000, 0x00020},
2340 {"pin", 0x610100, 0x00020},
2341 {"product-info", 0x611100, 0x01000},
2342 {"soft-version", 0x620000, 0x01000},
2343 {"support-list", 0x621000, 0x01000},
2344 {"profile", 0x622000, 0x08000},
2345 {"user-config", 0x630000, 0x10000},
2346 {"default-config", 0x640000, 0x10000},
2347 {"radio", 0x7f0000, 0x10000},
2351 .first_sysupgrade_partition
= "os-image",
2352 .last_sysupgrade_partition
= "file-system"
2355 /** Firmware layout for the RE450 v2 */
2361 "{product_name:RE450,product_ver:2.0.0,special_id:00000000}\r\n"
2362 "{product_name:RE450,product_ver:2.0.0,special_id:55530000}\r\n"
2363 "{product_name:RE450,product_ver:2.0.0,special_id:45550000}\r\n"
2364 "{product_name:RE450,product_ver:2.0.0,special_id:4A500000}\r\n"
2365 "{product_name:RE450,product_ver:2.0.0,special_id:43410000}\r\n"
2366 "{product_name:RE450,product_ver:2.0.0,special_id:41550000}\r\n"
2367 "{product_name:RE450,product_ver:2.0.0,special_id:41530000}\r\n"
2368 "{product_name:RE450,product_ver:2.0.0,special_id:4B520000}\r\n"
2369 "{product_name:RE450,product_ver:2.0.0,special_id:42520000}\r\n",
2373 /* We're using a dynamic kernel/rootfs split here */
2375 {"fs-uboot", 0x00000, 0x20000},
2376 {"firmware", 0x20000, 0x5e0000},
2377 {"partition-table", 0x600000, 0x02000},
2378 {"default-mac", 0x610000, 0x00020},
2379 {"pin", 0x610100, 0x00020},
2380 {"product-info", 0x611100, 0x01000},
2381 {"soft-version", 0x620000, 0x01000},
2382 {"support-list", 0x621000, 0x01000},
2383 {"profile", 0x622000, 0x08000},
2384 {"user-config", 0x630000, 0x10000},
2385 {"default-config", 0x640000, 0x10000},
2386 {"radio", 0x7f0000, 0x10000},
2390 .first_sysupgrade_partition
= "os-image",
2391 .last_sysupgrade_partition
= "file-system"
2394 /** Firmware layout for the RE450 v3 */
2400 "{product_name:RE450,product_ver:3.0.0,special_id:00000000}\r\n"
2401 "{product_name:RE450,product_ver:3.0.0,special_id:55530000}\r\n"
2402 "{product_name:RE450,product_ver:3.0.0,special_id:45550000}\r\n"
2403 "{product_name:RE450,product_ver:3.0.0,special_id:4A500000}\r\n"
2404 "{product_name:RE450,product_ver:3.0.0,special_id:43410000}\r\n"
2405 "{product_name:RE450,product_ver:3.0.0,special_id:41550000}\r\n"
2406 "{product_name:RE450,product_ver:3.0.0,special_id:41530000}\r\n"
2407 "{product_name:RE450,product_ver:3.0.0,special_id:4B520000}\r\n"
2408 "{product_name:RE450,product_ver:3.0.0,special_id:42520000}\r\n",
2412 /* We're using a dynamic kernel/rootfs split here */
2414 {"fs-uboot", 0x00000, 0x20000},
2415 {"default-mac", 0x20000, 0x00020},
2416 {"pin", 0x20020, 0x00020},
2417 {"product-info", 0x21000, 0x01000},
2418 {"partition-table", 0x22000, 0x02000},
2419 {"soft-version", 0x24000, 0x01000},
2420 {"support-list", 0x25000, 0x01000},
2421 {"profile", 0x26000, 0x08000},
2422 {"user-config", 0x2e000, 0x10000},
2423 {"default-config", 0x3e000, 0x10000},
2424 {"config-info", 0x4e000, 0x00400},
2425 {"firmware", 0x50000, 0x7a0000},
2426 {"radio", 0x7f0000, 0x10000},
2430 .first_sysupgrade_partition
= "os-image",
2431 .last_sysupgrade_partition
= "file-system"
2434 /** Firmware layout for the RE500 */
2440 "{product_name:RE500,product_ver:1.0.0,special_id:00000000}\r\n"
2441 "{product_name:RE500,product_ver:1.0.0,special_id:55530000}\r\n"
2442 "{product_name:RE500,product_ver:1.0.0,special_id:45550000}\r\n"
2443 "{product_name:RE500,product_ver:1.0.0,special_id:4A500000}\r\n"
2444 "{product_name:RE500,product_ver:1.0.0,special_id:43410000}\r\n"
2445 "{product_name:RE500,product_ver:1.0.0,special_id:41550000}\r\n"
2446 "{product_name:RE500,product_ver:1.0.0,special_id:41530000}\r\n",
2450 /* We're using a dynamic kernel/rootfs split here */
2452 {"fs-uboot", 0x00000, 0x20000},
2453 {"firmware", 0x20000, 0xde0000},
2454 {"partition-table", 0xe00000, 0x02000},
2455 {"default-mac", 0xe10000, 0x00020},
2456 {"pin", 0xe10100, 0x00020},
2457 {"product-info", 0xe11100, 0x01000},
2458 {"soft-version", 0xe20000, 0x01000},
2459 {"support-list", 0xe21000, 0x01000},
2460 {"profile", 0xe22000, 0x08000},
2461 {"user-config", 0xe30000, 0x10000},
2462 {"default-config", 0xe40000, 0x10000},
2463 {"radio", 0xff0000, 0x10000},
2467 .first_sysupgrade_partition
= "os-image",
2468 .last_sysupgrade_partition
= "file-system"
2471 /** Firmware layout for the RE650 */
2477 "{product_name:RE650,product_ver:1.0.0,special_id:00000000}\r\n"
2478 "{product_name:RE650,product_ver:1.0.0,special_id:55530000}\r\n"
2479 "{product_name:RE650,product_ver:1.0.0,special_id:45550000}\r\n"
2480 "{product_name:RE650,product_ver:1.0.0,special_id:4A500000}\r\n"
2481 "{product_name:RE650,product_ver:1.0.0,special_id:43410000}\r\n"
2482 "{product_name:RE650,product_ver:1.0.0,special_id:41550000}\r\n"
2483 "{product_name:RE650,product_ver:1.0.0,special_id:41530000}\r\n",
2487 /* We're using a dynamic kernel/rootfs split here */
2489 {"fs-uboot", 0x00000, 0x20000},
2490 {"firmware", 0x20000, 0xde0000},
2491 {"partition-table", 0xe00000, 0x02000},
2492 {"default-mac", 0xe10000, 0x00020},
2493 {"pin", 0xe10100, 0x00020},
2494 {"product-info", 0xe11100, 0x01000},
2495 {"soft-version", 0xe20000, 0x01000},
2496 {"support-list", 0xe21000, 0x01000},
2497 {"profile", 0xe22000, 0x08000},
2498 {"user-config", 0xe30000, 0x10000},
2499 {"default-config", 0xe40000, 0x10000},
2500 {"radio", 0xff0000, 0x10000},
2504 .first_sysupgrade_partition
= "os-image",
2505 .last_sysupgrade_partition
= "file-system"
2511 #define error(_ret, _errno, _str, ...) \
2513 fprintf(stderr, _str ": %s\n", ## __VA_ARGS__, \
2514 strerror(_errno)); \
2520 /** Stores a uint32 as big endian */
2521 static inline void put32(uint8_t *buf
, uint32_t val
) {
2528 static inline bool meta_partition_should_pad(enum partition_trail_value pv
)
2530 return (pv
>= 0) && (pv
<= PART_TRAIL_MAX
);
2533 /** Allocate a padded meta partition with a correctly initialised header
2534 * If the `data` pointer is NULL, then the required space is only allocated,
2535 * otherwise `data_len` bytes will be copied from `data` into the partition
2537 static struct image_partition_entry
init_meta_partition_entry(
2538 const char *name
, const void *data
, uint32_t data_len
,
2539 enum partition_trail_value pad_value
)
2541 uint32_t total_len
= sizeof(struct meta_header
) + data_len
;
2542 if (meta_partition_should_pad(pad_value
))
2545 struct image_partition_entry entry
= {
2548 .data
= malloc(total_len
)
2551 error(1, errno
, "failed to allocate meta partition entry");
2553 struct meta_header
*header
= (struct meta_header
*)entry
.data
;
2554 header
->length
= htonl(data_len
);
2558 memcpy(entry
.data
+sizeof(*header
), data
, data_len
);
2560 if (meta_partition_should_pad(pad_value
))
2561 entry
.data
[total_len
- 1] = (uint8_t) pad_value
;
2566 /** Allocates a new image partition */
2567 static struct image_partition_entry
alloc_image_partition(const char *name
, size_t len
) {
2568 struct image_partition_entry entry
= {name
, len
, malloc(len
)};
2570 error(1, errno
, "malloc");
2575 /** Frees an image partition */
2576 static void free_image_partition(struct image_partition_entry entry
) {
2580 static time_t source_date_epoch
= -1;
2581 static void set_source_date_epoch() {
2582 char *env
= getenv("SOURCE_DATE_EPOCH");
2586 source_date_epoch
= strtoull(env
, &endptr
, 10);
2587 if (errno
|| (endptr
&& *endptr
!= '\0')) {
2588 fprintf(stderr
, "Invalid SOURCE_DATE_EPOCH");
2594 /** Generates the partition-table partition */
2595 static struct image_partition_entry
make_partition_table(const struct flash_partition_entry
*p
) {
2596 struct image_partition_entry entry
= alloc_image_partition("partition-table", 0x800);
2598 char *s
= (char *)entry
.data
, *end
= (char *)(s
+entry
.size
);
2606 for (i
= 0; p
[i
].name
; i
++) {
2608 size_t w
= snprintf(s
, len
, "partition %s base 0x%05x size 0x%05x\n", p
[i
].name
, p
[i
].base
, p
[i
].size
);
2611 error(1, 0, "flash partition table overflow?");
2618 memset(s
, 0xff, end
-s
);
2624 /** Generates a binary-coded decimal representation of an integer in the range [0, 99] */
2625 static inline uint8_t bcd(uint8_t v
) {
2626 return 0x10 * (v
/10) + v
%10;
2630 /** Generates the soft-version partition */
2631 static struct image_partition_entry
make_soft_version(
2632 const struct device_info
*info
, uint32_t rev
)
2634 /** If an info string is provided, use this instead of
2635 * the structured data, and include the null-termination */
2636 if (info
->soft_ver
) {
2637 uint32_t len
= strlen(info
->soft_ver
) + 1;
2638 return init_meta_partition_entry("soft-version",
2639 info
->soft_ver
, len
, info
->part_trail
);
2644 if (source_date_epoch
!= -1)
2645 t
= source_date_epoch
;
2646 else if (time(&t
) == (time_t)(-1))
2647 error(1, errno
, "time");
2649 struct tm
*tm
= gmtime(&t
);
2651 struct soft_version s
= {
2658 .year_hi
= bcd((1900+tm
->tm_year
)/100),
2659 .year_lo
= bcd(tm
->tm_year
%100),
2660 .month
= bcd(tm
->tm_mon
+1),
2661 .day
= bcd(tm
->tm_mday
),
2663 .compat_level
= htonl(info
->soft_ver_compat_level
)
2666 if (info
->soft_ver_compat_level
== 0)
2667 return init_meta_partition_entry("soft-version", &s
,
2668 (uint8_t *)(&s
.compat_level
) - (uint8_t *)(&s
),
2671 return init_meta_partition_entry("soft-version", &s
,
2672 sizeof(s
), info
->part_trail
);
2675 /** Generates the support-list partition */
2676 static struct image_partition_entry
make_support_list(
2677 const struct device_info
*info
)
2679 uint32_t len
= strlen(info
->support_list
);
2680 return init_meta_partition_entry("support-list", info
->support_list
,
2681 len
, info
->part_trail
);
2684 /** Partition with extra-para data */
2685 static struct image_partition_entry
make_extra_para(
2686 const struct device_info
*info
, const uint8_t *extra_para
, size_t len
)
2688 return init_meta_partition_entry("extra-para", extra_para
, len
,
2692 /** Creates a new image partition with an arbitrary name from a file */
2693 static struct image_partition_entry
read_file(const char *part_name
, const char *filename
, bool add_jffs2_eof
, struct flash_partition_entry
*file_system_partition
) {
2694 struct stat statbuf
;
2696 if (stat(filename
, &statbuf
) < 0)
2697 error(1, errno
, "unable to stat file `%s'", filename
);
2699 size_t len
= statbuf
.st_size
;
2701 if (add_jffs2_eof
) {
2702 if (file_system_partition
)
2703 len
= ALIGN(len
+ file_system_partition
->base
, 0x10000) + sizeof(jffs2_eof_mark
) - file_system_partition
->base
;
2705 len
= ALIGN(len
, 0x10000) + sizeof(jffs2_eof_mark
);
2708 struct image_partition_entry entry
= alloc_image_partition(part_name
, len
);
2710 FILE *file
= fopen(filename
, "rb");
2712 error(1, errno
, "unable to open file `%s'", filename
);
2714 if (fread(entry
.data
, statbuf
.st_size
, 1, file
) != 1)
2715 error(1, errno
, "unable to read file `%s'", filename
);
2717 if (add_jffs2_eof
) {
2718 uint8_t *eof
= entry
.data
+ statbuf
.st_size
, *end
= entry
.data
+entry
.size
;
2720 memset(eof
, 0xff, end
- eof
- sizeof(jffs2_eof_mark
));
2721 memcpy(end
- sizeof(jffs2_eof_mark
), jffs2_eof_mark
, sizeof(jffs2_eof_mark
));
2730 Copies a list of image partitions into an image buffer and generates the image partition table while doing so
2732 Example image partition table:
2734 fwup-ptn partition-table base 0x00800 size 0x00800
2735 fwup-ptn os-image base 0x01000 size 0x113b45
2736 fwup-ptn file-system base 0x114b45 size 0x1d0004
2737 fwup-ptn support-list base 0x2e4b49 size 0x000d1
2739 Each line of the partition table is terminated with the bytes 09 0d 0a ("\t\r\n"),
2740 the end of the partition table is marked with a zero byte.
2742 The firmware image must contain at least the partition-table and support-list partitions
2743 to be accepted. There aren't any alignment constraints for the image partitions.
2745 The partition-table partition contains the actual flash layout; partitions
2746 from the image partition table are mapped to the corresponding flash partitions during
2747 the firmware upgrade. The support-list partition contains a list of devices supported by
2750 The base offsets in the firmware partition table are relative to the end
2751 of the vendor information block, so the partition-table partition will
2752 actually start at offset 0x1814 of the image.
2754 I think partition-table must be the first partition in the firmware image.
2756 static void put_partitions(uint8_t *buffer
, const struct flash_partition_entry
*flash_parts
, const struct image_partition_entry
*parts
) {
2758 char *image_pt
= (char *)buffer
, *end
= image_pt
+ 0x800;
2760 size_t base
= 0x800;
2761 for (i
= 0; parts
[i
].name
; i
++) {
2762 for (j
= 0; flash_parts
[j
].name
; j
++) {
2763 if (!strcmp(flash_parts
[j
].name
, parts
[i
].name
)) {
2764 if (parts
[i
].size
> flash_parts
[j
].size
)
2765 error(1, 0, "%s partition too big (more than %u bytes)", flash_parts
[j
].name
, (unsigned)flash_parts
[j
].size
);
2770 assert(flash_parts
[j
].name
);
2772 memcpy(buffer
+ base
, parts
[i
].data
, parts
[i
].size
);
2774 size_t len
= end
-image_pt
;
2775 size_t w
= snprintf(image_pt
, len
, "fwup-ptn %s base 0x%05x size 0x%05x\t\r\n", parts
[i
].name
, (unsigned)base
, (unsigned)parts
[i
].size
);
2778 error(1, 0, "image partition table overflow?");
2782 base
+= parts
[i
].size
;
2786 /** Generates and writes the image MD5 checksum */
2787 static void put_md5(uint8_t *md5
, uint8_t *buffer
, unsigned int len
) {
2791 MD5_Update(&ctx
, md5_salt
, (unsigned int)sizeof(md5_salt
));
2792 MD5_Update(&ctx
, buffer
, len
);
2793 MD5_Final(md5
, &ctx
);
2798 Generates the firmware image in factory format
2804 0000-0003 Image size (4 bytes, big endian)
2805 0004-0013 MD5 hash (hash of a 16 byte salt and the image data starting with byte 0x14)
2806 0014-0017 Vendor information length (without padding) (4 bytes, big endian)
2807 0018-1013 Vendor information (4092 bytes, padded with 0xff; there seem to be older
2808 (VxWorks-based) TP-LINK devices which use a smaller vendor information block)
2809 1014-1813 Image partition table (2048 bytes, padded with 0xff)
2810 1814-xxxx Firmware partitions
2812 static void * generate_factory_image(struct device_info
*info
, const struct image_partition_entry
*parts
, size_t *len
) {
2816 for (i
= 0; parts
[i
].name
; i
++)
2817 *len
+= parts
[i
].size
;
2819 uint8_t *image
= malloc(*len
);
2821 error(1, errno
, "malloc");
2823 memset(image
, 0xff, *len
);
2827 size_t vendor_len
= strlen(info
->vendor
);
2828 put32(image
+0x14, vendor_len
);
2829 memcpy(image
+0x18, info
->vendor
, vendor_len
);
2832 put_partitions(image
+ 0x1014, info
->partitions
, parts
);
2833 put_md5(image
+0x04, image
+0x14, *len
-0x14);
2839 Generates the firmware image in sysupgrade format
2841 This makes some assumptions about the provided flash and image partition tables and
2842 should be generalized when TP-LINK starts building its safeloader into hardware with
2843 different flash layouts.
2845 static void * generate_sysupgrade_image(struct device_info
*info
, const struct image_partition_entry
*image_parts
, size_t *len
) {
2847 size_t flash_first_partition_index
= 0;
2848 size_t flash_last_partition_index
= 0;
2849 const struct flash_partition_entry
*flash_first_partition
= NULL
;
2850 const struct flash_partition_entry
*flash_last_partition
= NULL
;
2851 const struct image_partition_entry
*image_last_partition
= NULL
;
2853 /** Find first and last partitions */
2854 for (i
= 0; info
->partitions
[i
].name
; i
++) {
2855 if (!strcmp(info
->partitions
[i
].name
, info
->first_sysupgrade_partition
)) {
2856 flash_first_partition
= &info
->partitions
[i
];
2857 flash_first_partition_index
= i
;
2858 } else if (!strcmp(info
->partitions
[i
].name
, info
->last_sysupgrade_partition
)) {
2859 flash_last_partition
= &info
->partitions
[i
];
2860 flash_last_partition_index
= i
;
2864 assert(flash_first_partition
&& flash_last_partition
);
2865 assert(flash_first_partition_index
< flash_last_partition_index
);
2867 /** Find last partition from image to calculate needed size */
2868 for (i
= 0; image_parts
[i
].name
; i
++) {
2869 if (!strcmp(image_parts
[i
].name
, info
->last_sysupgrade_partition
)) {
2870 image_last_partition
= &image_parts
[i
];
2875 assert(image_last_partition
);
2877 *len
= flash_last_partition
->base
- flash_first_partition
->base
+ image_last_partition
->size
;
2879 uint8_t *image
= malloc(*len
);
2881 error(1, errno
, "malloc");
2883 memset(image
, 0xff, *len
);
2885 for (i
= flash_first_partition_index
; i
<= flash_last_partition_index
; i
++) {
2886 for (j
= 0; image_parts
[j
].name
; j
++) {
2887 if (!strcmp(info
->partitions
[i
].name
, image_parts
[j
].name
)) {
2888 if (image_parts
[j
].size
> info
->partitions
[i
].size
)
2889 error(1, 0, "%s partition too big (more than %u bytes)", info
->partitions
[i
].name
, (unsigned)info
->partitions
[i
].size
);
2890 memcpy(image
+ info
->partitions
[i
].base
- flash_first_partition
->base
, image_parts
[j
].data
, image_parts
[j
].size
);
2894 assert(image_parts
[j
].name
);
2901 /** Generates an image according to a given layout and writes it to a file */
2902 static void build_image(const char *output
,
2903 const char *kernel_image
,
2904 const char *rootfs_image
,
2908 struct device_info
*info
) {
2912 struct image_partition_entry parts
[7] = {};
2914 struct flash_partition_entry
*firmware_partition
= NULL
;
2915 struct flash_partition_entry
*os_image_partition
= NULL
;
2916 struct flash_partition_entry
*file_system_partition
= NULL
;
2917 size_t firmware_partition_index
= 0;
2919 for (i
= 0; info
->partitions
[i
].name
; i
++) {
2920 if (!strcmp(info
->partitions
[i
].name
, "firmware"))
2922 firmware_partition
= &info
->partitions
[i
];
2923 firmware_partition_index
= i
;
2927 if (firmware_partition
)
2929 os_image_partition
= &info
->partitions
[firmware_partition_index
];
2930 file_system_partition
= &info
->partitions
[firmware_partition_index
+ 1];
2933 if (stat(kernel_image
, &kernel
) < 0)
2934 error(1, errno
, "unable to stat file `%s'", kernel_image
);
2936 if (kernel
.st_size
> firmware_partition
->size
)
2937 error(1, 0, "kernel overflowed firmware partition\n");
2939 for (i
= MAX_PARTITIONS
-1; i
>= firmware_partition_index
+ 1; i
--)
2940 info
->partitions
[i
+1] = info
->partitions
[i
];
2942 file_system_partition
->name
= "file-system";
2943 file_system_partition
->base
= firmware_partition
->base
+ kernel
.st_size
;
2945 /* Align partition start to erase blocks for factory images only */
2947 file_system_partition
->base
= ALIGN(firmware_partition
->base
+ kernel
.st_size
, 0x10000);
2949 file_system_partition
->size
= firmware_partition
->size
- file_system_partition
->base
;
2951 os_image_partition
->name
= "os-image";
2952 os_image_partition
->size
= kernel
.st_size
;
2955 parts
[0] = make_partition_table(info
->partitions
);
2956 parts
[1] = make_soft_version(info
, rev
);
2957 parts
[2] = make_support_list(info
);
2958 parts
[3] = read_file("os-image", kernel_image
, false, NULL
);
2959 parts
[4] = read_file("file-system", rootfs_image
, add_jffs2_eof
, file_system_partition
);
2961 /* Some devices need the extra-para partition to accept the firmware */
2962 if (strcasecmp(info
->id
, "ARCHER-A6-V3") == 0 ||
2963 strcasecmp(info
->id
, "ARCHER-A7-V5") == 0 ||
2964 strcasecmp(info
->id
, "ARCHER-C2-V3") == 0 ||
2965 strcasecmp(info
->id
, "ARCHER-C7-V4") == 0 ||
2966 strcasecmp(info
->id
, "ARCHER-C7-V5") == 0 ||
2967 strcasecmp(info
->id
, "ARCHER-C25-V1") == 0 ||
2968 strcasecmp(info
->id
, "ARCHER-C59-V2") == 0 ||
2969 strcasecmp(info
->id
, "ARCHER-C60-V2") == 0 ||
2970 strcasecmp(info
->id
, "ARCHER-C60-V3") == 0 ||
2971 strcasecmp(info
->id
, "ARCHER-C6U-V1") == 0 ||
2972 strcasecmp(info
->id
, "ARCHER-C6-V3") == 0 ||
2973 strcasecmp(info
->id
, "TLWR1043NV5") == 0) {
2974 const uint8_t extra_para
[2] = {0x01, 0x00};
2975 parts
[5] = make_extra_para(info
, extra_para
,
2976 sizeof(extra_para
));
2977 } else if (strcasecmp(info
->id
, "ARCHER-C6-V2") == 0) {
2978 const uint8_t extra_para
[2] = {0x00, 0x01};
2979 parts
[5] = make_extra_para(info
, extra_para
,
2980 sizeof(extra_para
));
2981 } else if (strcasecmp(info
->id
, "ARCHER-C6-V2-US") == 0 ||
2982 strcasecmp(info
->id
, "EAP245-V3") == 0) {
2983 const uint8_t extra_para
[2] = {0x01, 0x01};
2984 parts
[5] = make_extra_para(info
, extra_para
,
2985 sizeof(extra_para
));
2991 image
= generate_sysupgrade_image(info
, parts
, &len
);
2993 image
= generate_factory_image(info
, parts
, &len
);
2995 FILE *file
= fopen(output
, "wb");
2997 error(1, errno
, "unable to open output file");
2999 if (fwrite(image
, len
, 1, file
) != 1)
3000 error(1, 0, "unable to write output file");
3006 for (i
= 0; parts
[i
].name
; i
++)
3007 free_image_partition(parts
[i
]);
3011 static void usage(const char *argv0
) {
3013 "Usage: %s [OPTIONS...]\n"
3016 " -h show this help\n"
3018 "Info about an image:\n"
3019 " -i <file> input file to read from\n"
3020 "Create a new image:\n"
3021 " -B <board> create image for the board specified with <board>\n"
3022 " -k <file> read kernel image from the file <file>\n"
3023 " -r <file> read rootfs image from the file <file>\n"
3024 " -o <file> write output to the file <file>\n"
3025 " -V <rev> sets the revision number to <rev>\n"
3026 " -j add jffs2 end-of-filesystem markers\n"
3027 " -S create sysupgrade instead of factory image\n"
3028 "Extract an old image:\n"
3029 " -x <file> extract all oem firmware partition\n"
3030 " -d <dir> destination to extract the firmware partition\n"
3031 " -z <file> convert an oem firmware into a sysupgade file. Use -o for output file\n",
3037 static struct device_info
*find_board(const char *id
)
3039 struct device_info
*board
= NULL
;
3041 for (board
= boards
; board
->id
!= NULL
; board
++)
3042 if (strcasecmp(id
, board
->id
) == 0)
3048 static int add_flash_partition(
3049 struct flash_partition_entry
*part_list
,
3056 /* check if the list has a free entry */
3057 for (ptr
= 0; ptr
< max_entries
; ptr
++, part_list
++) {
3058 if (part_list
->name
== NULL
&&
3059 part_list
->base
== 0 &&
3060 part_list
->size
== 0)
3064 if (ptr
== max_entries
) {
3065 error(1, 0, "No free flash part entry available.");
3068 part_list
->name
= calloc(1, strlen(name
) + 1);
3069 if (!part_list
->name
) {
3070 error(1, 0, "Unable to allocate memory");
3073 memcpy((char *)part_list
->name
, name
, strlen(name
));
3074 part_list
->base
= base
;
3075 part_list
->size
= size
;
3080 /** read the partition table into struct flash_partition_entry */
3081 static int read_partition_table(
3082 FILE *file
, long offset
,
3083 struct flash_partition_entry
*entries
, size_t max_entries
,
3088 const char *parthdr
= NULL
;
3089 const char *fwuphdr
= "fwup-ptn";
3090 const char *flashhdr
= "partition";
3092 /* TODO: search for the partition table */
3102 error(1, 0, "Invalid partition table");
3105 if (fseek(file
, offset
, SEEK_SET
) < 0)
3106 error(1, errno
, "Can not seek in the firmware");
3108 if (fread(buf
, 2048, 1, file
) != 1)
3109 error(1, errno
, "Can not read fwup-ptn from the firmware");
3113 /* look for the partition header */
3114 if (memcmp(buf
, parthdr
, strlen(parthdr
)) != 0) {
3115 fprintf(stderr
, "DEBUG: can not find fwuphdr\n");
3120 end
= buf
+ sizeof(buf
);
3121 while ((ptr
+ strlen(parthdr
)) < end
&&
3122 memcmp(ptr
, parthdr
, strlen(parthdr
)) == 0) {
3126 char name
[32] = { 0 };
3128 unsigned long base
= 0;
3129 unsigned long size
= 0;
3131 end_part
= memchr(ptr
, '\n', (end
- ptr
));
3132 if (end_part
== NULL
) {
3133 /* in theory this should never happen, because a partition always ends with 0x09, 0x0D, 0x0A */
3137 for (int i
= 0; i
<= 4; i
++) {
3138 if (end_part
<= ptr
)
3141 end_element
= memchr(ptr
, 0x20, (end_part
- ptr
));
3142 if (end_element
== NULL
) {
3143 error(1, errno
, "Ignoring the rest of the partition entries.");
3148 /* partition header */
3150 ptr
= end_element
+ 1;
3154 name_len
= (end_element
- ptr
) > 31 ? 31 : (end_element
- ptr
);
3155 strncpy(name
, ptr
, name_len
);
3156 name
[name_len
] = '\0';
3157 ptr
= end_element
+ 1;
3162 ptr
= end_element
+ 1;
3167 base
= strtoul(ptr
, NULL
, 16);
3168 ptr
= end_element
+ 1;
3173 ptr
= end_element
+ 1;
3174 /* actual size. The last element doesn't have a sepeartor */
3175 size
= strtoul(ptr
, NULL
, 16);
3176 /* the part ends with 0x09, 0x0d, 0x0a */
3178 add_flash_partition(entries
, max_entries
, name
, base
, size
);
3187 static void write_partition(
3189 size_t firmware_offset
,
3190 struct flash_partition_entry
*entry
,
3196 fseek(input_file
, entry
->base
+ firmware_offset
, SEEK_SET
);
3198 for (offset
= 0; sizeof(buf
) + offset
<= entry
->size
; offset
+= sizeof(buf
)) {
3199 if (fread(buf
, sizeof(buf
), 1, input_file
) != 1)
3200 error(1, errno
, "Can not read partition from input_file");
3202 if (fwrite(buf
, sizeof(buf
), 1, output_file
) != 1)
3203 error(1, errno
, "Can not write partition to output_file");
3205 /* write last chunk smaller than buffer */
3206 if (offset
< entry
->size
) {
3207 offset
= entry
->size
- offset
;
3208 if (fread(buf
, offset
, 1, input_file
) != 1)
3209 error(1, errno
, "Can not read partition from input_file");
3210 if (fwrite(buf
, offset
, 1, output_file
) != 1)
3211 error(1, errno
, "Can not write partition to output_file");
3215 static int extract_firmware_partition(FILE *input_file
, size_t firmware_offset
, struct flash_partition_entry
*entry
, const char *output_directory
)
3218 char output
[PATH_MAX
];
3220 snprintf(output
, PATH_MAX
, "%s/%s", output_directory
, entry
->name
);
3221 output_file
= fopen(output
, "wb+");
3222 if (output_file
== NULL
) {
3223 error(1, errno
, "Can not open output file %s", output
);
3226 write_partition(input_file
, firmware_offset
, entry
, output_file
);
3228 fclose(output_file
);
3233 /** extract all partitions from the firmware file */
3234 static int extract_firmware(const char *input
, const char *output_directory
)
3236 struct flash_partition_entry entries
[16] = { 0 };
3237 size_t max_entries
= 16;
3238 size_t firmware_offset
= 0x1014;
3241 struct stat statbuf
;
3243 /* check input file */
3244 if (stat(input
, &statbuf
)) {
3245 error(1, errno
, "Can not read input firmware %s", input
);
3248 /* check if output directory exists */
3249 if (stat(output_directory
, &statbuf
)) {
3250 error(1, errno
, "Failed to stat output directory %s", output_directory
);
3253 if ((statbuf
.st_mode
& S_IFMT
) != S_IFDIR
) {
3254 error(1, errno
, "Given output directory is not a directory %s", output_directory
);
3257 input_file
= fopen(input
, "rb");
3259 if (read_partition_table(input_file
, firmware_offset
, entries
, 16, 0) != 0) {
3260 error(1, 0, "Error can not read the partition table (fwup-ptn)");
3263 for (size_t i
= 0; i
< max_entries
; i
++) {
3264 if (entries
[i
].name
== NULL
&&
3265 entries
[i
].base
== 0 &&
3266 entries
[i
].size
== 0)
3269 extract_firmware_partition(input_file
, firmware_offset
, &entries
[i
], output_directory
);
3275 static struct flash_partition_entry
*find_partition(
3276 struct flash_partition_entry
*entries
, size_t max_entries
,
3277 const char *name
, const char *error_msg
)
3279 for (size_t i
= 0; i
< max_entries
; i
++, entries
++) {
3280 if (strcmp(entries
->name
, name
) == 0)
3285 error(1, 0, "%s", error_msg
);
3291 static int firmware_info(const char *input
)
3293 struct flash_partition_entry pointers
[MAX_PARTITIONS
] = { };
3294 struct flash_partition_entry
*e
;
3298 fp
= fopen(input
, "r");
3300 if (read_partition_table(fp
, 0x1014, pointers
, MAX_PARTITIONS
, 0)) {
3301 error(1, 0, "Error can not read the partition table (fwup-ptn)");
3304 printf("Firmware image partitions:\n");
3305 printf("%-8s %-8s %s\n", "base", "size", "name");
3306 for (i
= 0; i
< MAX_PARTITIONS
; i
++) {
3309 if (!e
->name
&& !e
->base
&& !e
->size
)
3312 printf("%08x %08x %s\n", e
->base
, e
->size
, e
->name
? e
->name
: "");
3315 e
= find_partition(pointers
, MAX_PARTITIONS
, "soft-version", NULL
);
3317 size_t data_len
= e
->size
- sizeof(struct meta_header
);
3318 char *buf
= malloc(data_len
);
3319 struct soft_version
*s
;
3324 error(1, errno
, "Failed to alloc buffer");
3326 if (fseek(fp
, 0x1014 + e
->base
+ sizeof(struct meta_header
), SEEK_SET
))
3327 error(1, errno
, "Can not seek in the firmware");
3329 if (fread(buf
, data_len
, 1, fp
) != 1)
3330 error(1, errno
, "Can not read fwup-ptn data from the firmware");
3332 /* Check for string ignoring padding character */
3334 for (i
= 0; i
< data_len
- 1; i
++) {
3335 if (!isascii(buf
[i
])) {
3341 printf("\n[Software version]\n");
3343 fwrite(buf
, data_len
, 1, stdout
);
3345 } else if (data_len
>= offsetof(struct soft_version
, rev
)) {
3346 s
= (struct soft_version
*)buf
;
3348 printf("Version: %d.%d.%d\n", s
->version_major
, s
->version_minor
, s
->version_patch
);
3349 printf("Date: %02x%02x-%02x-%02x\n", s
->year_hi
, s
->year_lo
, s
->month
, s
->day
);
3351 printf("Failed to parse data\n");
3357 e
= find_partition(pointers
, MAX_PARTITIONS
, "support-list", NULL
);
3363 if (fseek(fp
, 0x1014 + e
->base
+ sizeof(struct meta_header
), SEEK_SET
))
3364 error(1, errno
, "Can not seek in the firmware");
3366 printf("\n[Support list]\n");
3367 for (length
= e
->size
- sizeof(struct meta_header
); length
; length
-= bytes
) {
3368 bytes
= fread(buf
, 1, length
> sizeof(buf
) ? sizeof(buf
) : length
, fp
);
3370 error(1, errno
, "Can not read fwup-ptn data from the firmware");
3376 e
= find_partition(pointers
, MAX_PARTITIONS
, "partition-table", NULL
);
3378 struct flash_partition_entry parts
[MAX_PARTITIONS
] = { };
3380 if (read_partition_table(fp
, 0x1014 + e
->base
+ 4, parts
, MAX_PARTITIONS
, 1)) {
3381 error(1, 0, "Error can not read the partition table (partition)");
3384 printf("\n[Partition table]\n");
3385 printf("%-8s %-8s %s\n", "base", "size", "name");
3386 for (i
= 0; i
< MAX_PARTITIONS
; i
++) {
3389 if (!e
->name
&& !e
->base
&& !e
->size
)
3392 printf("%08x %08x %s\n", e
->base
, e
->size
, e
->name
? e
->name
: "");
3401 static void write_ff(FILE *output_file
, size_t size
)
3406 memset(buf
, 0xff, sizeof(buf
));
3408 for (offset
= 0; offset
+ sizeof(buf
) < size
; offset
+= sizeof(buf
)) {
3409 if (fwrite(buf
, sizeof(buf
), 1, output_file
) != 1)
3410 error(1, errno
, "Can not write 0xff to output_file");
3413 /* write last chunk smaller than buffer */
3414 if (offset
< size
) {
3415 offset
= size
- offset
;
3416 if (fwrite(buf
, offset
, 1, output_file
) != 1)
3417 error(1, errno
, "Can not write partition to output_file");
3421 static void convert_firmware(const char *input
, const char *output
)
3423 struct flash_partition_entry fwup
[MAX_PARTITIONS
] = { 0 };
3424 struct flash_partition_entry flash
[MAX_PARTITIONS
] = { 0 };
3425 struct flash_partition_entry
*fwup_os_image
= NULL
, *fwup_file_system
= NULL
;
3426 struct flash_partition_entry
*flash_os_image
= NULL
, *flash_file_system
= NULL
;
3427 struct flash_partition_entry
*fwup_partition_table
= NULL
;
3428 size_t firmware_offset
= 0x1014;
3429 FILE *input_file
, *output_file
;
3431 struct stat statbuf
;
3433 /* check input file */
3434 if (stat(input
, &statbuf
)) {
3435 error(1, errno
, "Can not read input firmware %s", input
);
3438 input_file
= fopen(input
, "rb");
3440 error(1, 0, "Can not open input firmware %s", input
);
3442 output_file
= fopen(output
, "wb");
3444 error(1, 0, "Can not open output firmware %s", output
);
3446 if (read_partition_table(input_file
, firmware_offset
, fwup
, MAX_PARTITIONS
, 0) != 0) {
3447 error(1, 0, "Error can not read the partition table (fwup-ptn)");
3450 fwup_os_image
= find_partition(fwup
, MAX_PARTITIONS
,
3451 "os-image", "Error can not find os-image partition (fwup)");
3452 fwup_file_system
= find_partition(fwup
, MAX_PARTITIONS
,
3453 "file-system", "Error can not find file-system partition (fwup)");
3454 fwup_partition_table
= find_partition(fwup
, MAX_PARTITIONS
,
3455 "partition-table", "Error can not find partition-table partition");
3457 /* the flash partition table has a 0x00000004 magic haeder */
3458 if (read_partition_table(input_file
, firmware_offset
+ fwup_partition_table
->base
+ 4, flash
, MAX_PARTITIONS
, 1) != 0)
3459 error(1, 0, "Error can not read the partition table (flash)");
3461 flash_os_image
= find_partition(flash
, MAX_PARTITIONS
,
3462 "os-image", "Error can not find os-image partition (flash)");
3463 flash_file_system
= find_partition(flash
, MAX_PARTITIONS
,
3464 "file-system", "Error can not find file-system partition (flash)");
3466 /* write os_image to 0x0 */
3467 write_partition(input_file
, firmware_offset
, fwup_os_image
, output_file
);
3468 write_ff(output_file
, flash_os_image
->size
- fwup_os_image
->size
);
3470 /* write file-system behind os_image */
3471 fseek(output_file
, flash_file_system
->base
- flash_os_image
->base
, SEEK_SET
);
3472 write_partition(input_file
, firmware_offset
, fwup_file_system
, output_file
);
3473 write_ff(output_file
, flash_file_system
->size
- fwup_file_system
->size
);
3475 fclose(output_file
);
3479 int main(int argc
, char *argv
[]) {
3480 const char *info_image
= NULL
, *board
= NULL
, *kernel_image
= NULL
, *rootfs_image
= NULL
, *output
= NULL
;
3481 const char *extract_image
= NULL
, *output_directory
= NULL
, *convert_image
= NULL
;
3482 bool add_jffs2_eof
= false, sysupgrade
= false;
3484 struct device_info
*info
;
3485 set_source_date_epoch();
3490 c
= getopt(argc
, argv
, "i:B:k:r:o:V:jSh:x:d:z:");
3496 info_image
= optarg
;
3504 kernel_image
= optarg
;
3508 rootfs_image
= optarg
;
3516 sscanf(optarg
, "r%u", &rev
);
3520 add_jffs2_eof
= true;
3532 output_directory
= optarg
;
3536 extract_image
= optarg
;
3540 convert_image
= optarg
;
3550 firmware_info(info_image
);
3551 } else if (extract_image
|| output_directory
) {
3553 error(1, 0, "No factory/oem image given via -x <file>. Output directory is only valid with -x");
3554 if (!output_directory
)
3555 error(1, 0, "Can not extract an image without output directory. Use -d <dir>");
3556 extract_firmware(extract_image
, output_directory
);
3557 } else if (convert_image
) {
3559 error(1, 0, "Can not convert a factory/oem image into sysupgrade image without output file. Use -o <file>");
3560 convert_firmware(convert_image
, output
);
3563 error(1, 0, "no board has been specified");
3565 error(1, 0, "no kernel image has been specified");
3567 error(1, 0, "no rootfs image has been specified");
3569 error(1, 0, "no output filename has been specified");
3571 info
= find_board(board
);
3574 error(1, 0, "unsupported board %s", board
);
3576 build_image(output
, kernel_image
, rootfs_image
, rev
, add_jffs2_eof
, sysupgrade
, info
);