2 Copyright (c) 2014, Matthias Schiffer <mschiffer@universe-factory.net>
5 Redistribution and use in source and binary forms, with or without
6 modification, are permitted provided that the following conditions are met:
8 1. Redistributions of source code must retain the above copyright notice,
9 this list of conditions and the following disclaimer.
10 2. Redistributions in binary form must reproduce the above copyright notice,
11 this list of conditions and the following disclaimer in the documentation
12 and/or other materials provided with the distribution.
14 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
15 AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16 IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
17 DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
18 FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19 DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
20 SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
21 CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
22 OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
23 OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
30 Image generation tool for the TP-LINK SafeLoader as seen on
31 TP-LINK Pharos devices (CPE210/220/510/520)
45 #include <arpa/inet.h>
47 #include <sys/types.h>
54 #define ALIGN(x,a) ({ typeof(a) __a = (a); (((x) + __a - 1) & ~(__a - 1)); })
57 #define MAX_PARTITIONS 32
59 /** An image partition table entry */
60 struct image_partition_entry
{
66 /** A flash partition table entry */
67 struct flash_partition_entry
{
73 /** Firmware layout description */
77 const char *support_list
;
80 uint32_t soft_ver_compat_level
;
81 struct flash_partition_entry partitions
[MAX_PARTITIONS
+1];
82 const char *first_sysupgrade_partition
;
83 const char *last_sysupgrade_partition
;
86 /** The content of the soft-version structure */
87 struct __attribute__((__packed__
)) soft_version
{
91 uint8_t version_major
;
92 uint8_t version_minor
;
93 uint8_t version_patch
;
102 static const uint8_t jffs2_eof_mark
[4] = {0xde, 0xad, 0xc0, 0xde};
106 Salt for the MD5 hash
108 Fortunately, TP-LINK seems to use the same salt for most devices which use
109 the new image format.
111 static const uint8_t md5_salt
[16] = {
112 0x7a, 0x2b, 0x15, 0xed,
113 0x9b, 0x98, 0x59, 0x6d,
114 0xe5, 0x04, 0xab, 0x44,
115 0xac, 0x2a, 0x9f, 0x4e,
119 /** Firmware layout table */
120 static struct device_info boards
[] = {
121 /** Firmware layout for the CPE210/220 V1 */
124 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
127 "CPE210(TP-LINK|UN|N300-2):1.0\r\n"
128 "CPE210(TP-LINK|UN|N300-2):1.1\r\n"
129 "CPE210(TP-LINK|US|N300-2):1.1\r\n"
130 "CPE210(TP-LINK|EU|N300-2):1.1\r\n"
131 "CPE220(TP-LINK|UN|N300-2):1.1\r\n"
132 "CPE220(TP-LINK|US|N300-2):1.1\r\n"
133 "CPE220(TP-LINK|EU|N300-2):1.1\r\n",
134 .support_trail
= '\xff',
138 {"fs-uboot", 0x00000, 0x20000},
139 {"partition-table", 0x20000, 0x02000},
140 {"default-mac", 0x30000, 0x00020},
141 {"product-info", 0x31100, 0x00100},
142 {"signature", 0x32000, 0x00400},
143 {"os-image", 0x40000, 0x300000},
144 {"file-system", 0x340000, 0x470000},
145 {"soft-version", 0x7b0000, 0x00100},
146 {"support-list", 0x7b1000, 0x00400},
147 {"user-config", 0x7c0000, 0x10000},
148 {"default-config", 0x7d0000, 0x10000},
149 {"log", 0x7e0000, 0x10000},
150 {"radio", 0x7f0000, 0x10000},
154 .first_sysupgrade_partition
= "os-image",
155 .last_sysupgrade_partition
= "support-list",
158 /** Firmware layout for the CPE210 V2 */
161 .vendor
= "CPE210(TP-LINK|UN|N300-2|00000000):2.0\r\n",
164 "CPE210(TP-LINK|EU|N300-2|00000000):2.0\r\n"
165 "CPE210(TP-LINK|EU|N300-2|45550000):2.0\r\n"
166 "CPE210(TP-LINK|EU|N300-2|55530000):2.0\r\n"
167 "CPE210(TP-LINK|UN|N300-2|00000000):2.0\r\n"
168 "CPE210(TP-LINK|UN|N300-2|45550000):2.0\r\n"
169 "CPE210(TP-LINK|UN|N300-2|55530000):2.0\r\n"
170 "CPE210(TP-LINK|US|N300-2|55530000):2.0\r\n"
171 "CPE210(TP-LINK|UN|N300-2):2.0\r\n"
172 "CPE210(TP-LINK|EU|N300-2):2.0\r\n"
173 "CPE210(TP-LINK|US|N300-2):2.0\r\n",
174 .support_trail
= '\xff',
178 {"fs-uboot", 0x00000, 0x20000},
179 {"partition-table", 0x20000, 0x02000},
180 {"default-mac", 0x30000, 0x00020},
181 {"product-info", 0x31100, 0x00100},
182 {"device-info", 0x31400, 0x00400},
183 {"signature", 0x32000, 0x00400},
184 {"device-id", 0x33000, 0x00100},
185 {"firmware", 0x40000, 0x770000},
186 {"soft-version", 0x7b0000, 0x00100},
187 {"support-list", 0x7b1000, 0x01000},
188 {"user-config", 0x7c0000, 0x10000},
189 {"default-config", 0x7d0000, 0x10000},
190 {"log", 0x7e0000, 0x10000},
191 {"radio", 0x7f0000, 0x10000},
195 .first_sysupgrade_partition
= "os-image",
196 .last_sysupgrade_partition
= "support-list",
199 /** Firmware layout for the CPE210 V3 */
202 .vendor
= "CPE210(TP-LINK|UN|N300-2|00000000):3.0\r\n",
205 "CPE210(TP-LINK|EU|N300-2|45550000):3.0\r\n"
206 "CPE210(TP-LINK|UN|N300-2|00000000):3.0\r\n"
207 "CPE210(TP-LINK|US|N300-2|55530000):3.0\r\n"
208 "CPE210(TP-LINK|UN|N300-2):3.0\r\n"
209 "CPE210(TP-LINK|EU|N300-2):3.0\r\n"
210 "CPE210(TP-LINK|EU|N300-2|45550000):3.1\r\n"
211 "CPE210(TP-LINK|UN|N300-2|00000000):3.1\r\n"
212 "CPE210(TP-LINK|US|N300-2|55530000):3.1\r\n"
213 "CPE210(TP-LINK|EU|N300-2|45550000):3.20\r\n"
214 "CPE210(TP-LINK|UN|N300-2|00000000):3.20\r\n"
215 "CPE210(TP-LINK|US|N300-2|55530000):3.20\r\n",
216 .support_trail
= '\xff',
220 {"fs-uboot", 0x00000, 0x20000},
221 {"partition-table", 0x20000, 0x01000},
222 {"default-mac", 0x30000, 0x00020},
223 {"product-info", 0x31100, 0x00100},
224 {"device-info", 0x31400, 0x00400},
225 {"signature", 0x32000, 0x00400},
226 {"device-id", 0x33000, 0x00100},
227 {"firmware", 0x40000, 0x770000},
228 {"soft-version", 0x7b0000, 0x00100},
229 {"support-list", 0x7b1000, 0x01000},
230 {"user-config", 0x7c0000, 0x10000},
231 {"default-config", 0x7d0000, 0x10000},
232 {"log", 0x7e0000, 0x10000},
233 {"radio", 0x7f0000, 0x10000},
237 .first_sysupgrade_partition
= "os-image",
238 .last_sysupgrade_partition
= "support-list",
241 /** Firmware layout for the CPE220 V2 */
244 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
247 "CPE220(TP-LINK|EU|N300-2|00000000):2.0\r\n"
248 "CPE220(TP-LINK|EU|N300-2|45550000):2.0\r\n"
249 "CPE220(TP-LINK|EU|N300-2|55530000):2.0\r\n"
250 "CPE220(TP-LINK|UN|N300-2|00000000):2.0\r\n"
251 "CPE220(TP-LINK|UN|N300-2|45550000):2.0\r\n"
252 "CPE220(TP-LINK|UN|N300-2|55530000):2.0\r\n"
253 "CPE220(TP-LINK|US|N300-2|55530000):2.0\r\n"
254 "CPE220(TP-LINK|UN|N300-2):2.0\r\n"
255 "CPE220(TP-LINK|EU|N300-2):2.0\r\n"
256 "CPE220(TP-LINK|US|N300-2):2.0\r\n",
257 .support_trail
= '\xff',
261 {"fs-uboot", 0x00000, 0x20000},
262 {"partition-table", 0x20000, 0x02000},
263 {"default-mac", 0x30000, 0x00020},
264 {"product-info", 0x31100, 0x00100},
265 {"signature", 0x32000, 0x00400},
266 {"os-image", 0x40000, 0x300000},
267 {"file-system", 0x340000, 0x470000},
268 {"soft-version", 0x7b0000, 0x00100},
269 {"support-list", 0x7b1000, 0x00400},
270 {"user-config", 0x7c0000, 0x10000},
271 {"default-config", 0x7d0000, 0x10000},
272 {"log", 0x7e0000, 0x10000},
273 {"radio", 0x7f0000, 0x10000},
277 .first_sysupgrade_partition
= "os-image",
278 .last_sysupgrade_partition
= "support-list",
281 /** Firmware layout for the CPE220 V3 */
284 .vendor
= "CPE220(TP-LINK|UN|N300-2|00000000):3.0\r\n",
287 "CPE220(TP-LINK|EU|N300-2|00000000):3.0\r\n"
288 "CPE220(TP-LINK|EU|N300-2|45550000):3.0\r\n"
289 "CPE220(TP-LINK|EU|N300-2|55530000):3.0\r\n"
290 "CPE220(TP-LINK|UN|N300-2|00000000):3.0\r\n"
291 "CPE220(TP-LINK|UN|N300-2|45550000):3.0\r\n"
292 "CPE220(TP-LINK|UN|N300-2|55530000):3.0\r\n"
293 "CPE220(TP-LINK|US|N300-2|55530000):3.0\r\n"
294 "CPE220(TP-LINK|UN|N300-2):3.0\r\n"
295 "CPE220(TP-LINK|EU|N300-2):3.0\r\n"
296 "CPE220(TP-LINK|US|N300-2):3.0\r\n",
297 .support_trail
= '\xff',
301 {"fs-uboot", 0x00000, 0x20000},
302 {"partition-table", 0x20000, 0x02000},
303 {"default-mac", 0x30000, 0x00020},
304 {"product-info", 0x31100, 0x00100},
305 {"device-info", 0x31400, 0x00400},
306 {"signature", 0x32000, 0x00400},
307 {"device-id", 0x33000, 0x00100},
308 {"firmware", 0x40000, 0x770000},
309 {"soft-version", 0x7b0000, 0x00100},
310 {"support-list", 0x7b1000, 0x01000},
311 {"user-config", 0x7c0000, 0x10000},
312 {"default-config", 0x7d0000, 0x10000},
313 {"log", 0x7e0000, 0x10000},
314 {"radio", 0x7f0000, 0x10000},
318 .first_sysupgrade_partition
= "os-image",
319 .last_sysupgrade_partition
= "support-list",
322 /** Firmware layout for the CPE510/520 V1 */
325 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
328 "CPE510(TP-LINK|UN|N300-5):1.0\r\n"
329 "CPE510(TP-LINK|UN|N300-5):1.1\r\n"
330 "CPE510(TP-LINK|UN|N300-5):1.1\r\n"
331 "CPE510(TP-LINK|US|N300-5):1.1\r\n"
332 "CPE510(TP-LINK|EU|N300-5):1.1\r\n"
333 "CPE520(TP-LINK|UN|N300-5):1.1\r\n"
334 "CPE520(TP-LINK|US|N300-5):1.1\r\n"
335 "CPE520(TP-LINK|EU|N300-5):1.1\r\n",
336 .support_trail
= '\xff',
340 {"fs-uboot", 0x00000, 0x20000},
341 {"partition-table", 0x20000, 0x02000},
342 {"default-mac", 0x30000, 0x00020},
343 {"product-info", 0x31100, 0x00100},
344 {"signature", 0x32000, 0x00400},
345 {"os-image", 0x40000, 0x300000},
346 {"file-system", 0x340000, 0x470000},
347 {"soft-version", 0x7b0000, 0x00100},
348 {"support-list", 0x7b1000, 0x00400},
349 {"user-config", 0x7c0000, 0x10000},
350 {"default-config", 0x7d0000, 0x10000},
351 {"log", 0x7e0000, 0x10000},
352 {"radio", 0x7f0000, 0x10000},
356 .first_sysupgrade_partition
= "os-image",
357 .last_sysupgrade_partition
= "support-list",
360 /** Firmware layout for the CPE510 V2 */
363 .vendor
= "CPE510(TP-LINK|UN|N300-5):2.0\r\n",
366 "CPE510(TP-LINK|EU|N300-5|00000000):2.0\r\n"
367 "CPE510(TP-LINK|EU|N300-5|45550000):2.0\r\n"
368 "CPE510(TP-LINK|EU|N300-5|55530000):2.0\r\n"
369 "CPE510(TP-LINK|UN|N300-5|00000000):2.0\r\n"
370 "CPE510(TP-LINK|UN|N300-5|45550000):2.0\r\n"
371 "CPE510(TP-LINK|UN|N300-5|55530000):2.0\r\n"
372 "CPE510(TP-LINK|US|N300-5|00000000):2.0\r\n"
373 "CPE510(TP-LINK|US|N300-5|45550000):2.0\r\n"
374 "CPE510(TP-LINK|US|N300-5|55530000):2.0\r\n"
375 "CPE510(TP-LINK|UN|N300-5):2.0\r\n"
376 "CPE510(TP-LINK|EU|N300-5):2.0\r\n"
377 "CPE510(TP-LINK|US|N300-5):2.0\r\n",
378 .support_trail
= '\xff',
382 {"fs-uboot", 0x00000, 0x20000},
383 {"partition-table", 0x20000, 0x02000},
384 {"default-mac", 0x30000, 0x00020},
385 {"product-info", 0x31100, 0x00100},
386 {"signature", 0x32000, 0x00400},
387 {"os-image", 0x40000, 0x300000},
388 {"file-system", 0x340000, 0x470000},
389 {"soft-version", 0x7b0000, 0x00100},
390 {"support-list", 0x7b1000, 0x00400},
391 {"user-config", 0x7c0000, 0x10000},
392 {"default-config", 0x7d0000, 0x10000},
393 {"log", 0x7e0000, 0x10000},
394 {"radio", 0x7f0000, 0x10000},
398 .first_sysupgrade_partition
= "os-image",
399 .last_sysupgrade_partition
= "support-list",
402 /** Firmware layout for the CPE510 V3 */
405 .vendor
= "CPE510(TP-LINK|UN|N300-5):3.0\r\n",
408 "CPE510(TP-LINK|EU|N300-5|00000000):3.0\r\n"
409 "CPE510(TP-LINK|EU|N300-5|45550000):3.0\r\n"
410 "CPE510(TP-LINK|EU|N300-5|55530000):3.0\r\n"
411 "CPE510(TP-LINK|UN|N300-5|00000000):3.0\r\n"
412 "CPE510(TP-LINK|UN|N300-5|45550000):3.0\r\n"
413 "CPE510(TP-LINK|UN|N300-5|55530000):3.0\r\n"
414 "CPE510(TP-LINK|US|N300-5|00000000):3.0\r\n"
415 "CPE510(TP-LINK|US|N300-5|45550000):3.0\r\n"
416 "CPE510(TP-LINK|US|N300-5|55530000):3.0\r\n"
417 "CPE510(TP-LINK|UN|N300-5):3.0\r\n"
418 "CPE510(TP-LINK|EU|N300-5):3.0\r\n"
419 "CPE510(TP-LINK|US|N300-5):3.0\r\n",
420 .support_trail
= '\xff',
424 {"fs-uboot", 0x00000, 0x20000},
425 {"partition-table", 0x20000, 0x02000},
426 {"default-mac", 0x30000, 0x00020},
427 {"product-info", 0x31100, 0x00100},
428 {"signature", 0x32000, 0x00400},
429 {"os-image", 0x40000, 0x300000},
430 {"file-system", 0x340000, 0x470000},
431 {"soft-version", 0x7b0000, 0x00100},
432 {"support-list", 0x7b1000, 0x00400},
433 {"user-config", 0x7c0000, 0x10000},
434 {"default-config", 0x7d0000, 0x10000},
435 {"log", 0x7e0000, 0x10000},
436 {"radio", 0x7f0000, 0x10000},
440 .first_sysupgrade_partition
= "os-image",
441 .last_sysupgrade_partition
= "support-list",
444 /** Firmware layout for the CPE610V1 */
447 .vendor
= "CPE610(TP-LINK|UN|N300-5|00000000):1.0\r\n",
450 "CPE610(TP-LINK|EU|N300-5|00000000):1.0\r\n"
451 "CPE610(TP-LINK|EU|N300-5|45550000):1.0\r\n"
452 "CPE610(TP-LINK|EU|N300-5|55530000):1.0\r\n"
453 "CPE610(TP-LINK|UN|N300-5|00000000):1.0\r\n"
454 "CPE610(TP-LINK|UN|N300-5|45550000):1.0\r\n"
455 "CPE610(TP-LINK|UN|N300-5|55530000):1.0\r\n"
456 "CPE610(TP-LINK|US|N300-5|55530000):1.0\r\n"
457 "CPE610(TP-LINK|UN|N300-5):1.0\r\n"
458 "CPE610(TP-LINK|EU|N300-5):1.0\r\n"
459 "CPE610(TP-LINK|US|N300-5):1.0\r\n",
460 .support_trail
= '\xff',
464 {"fs-uboot", 0x00000, 0x20000},
465 {"partition-table", 0x20000, 0x02000},
466 {"default-mac", 0x30000, 0x00020},
467 {"product-info", 0x31100, 0x00100},
468 {"signature", 0x32000, 0x00400},
469 {"os-image", 0x40000, 0x300000},
470 {"file-system", 0x340000, 0x470000},
471 {"soft-version", 0x7b0000, 0x00100},
472 {"support-list", 0x7b1000, 0x00400},
473 {"user-config", 0x7c0000, 0x10000},
474 {"default-config", 0x7d0000, 0x10000},
475 {"log", 0x7e0000, 0x10000},
476 {"radio", 0x7f0000, 0x10000},
480 .first_sysupgrade_partition
= "os-image",
481 .last_sysupgrade_partition
= "support-list",
484 /** Firmware layout for the CPE610V2 */
487 .vendor
= "CPE610(TP-LINK|UN|N300-5|00000000):2.0\r\n",
490 "CPE610(TP-LINK|EU|N300-5|00000000):2.0\r\n"
491 "CPE610(TP-LINK|EU|N300-5|45550000):2.0\r\n"
492 "CPE610(TP-LINK|EU|N300-5|55530000):2.0\r\n"
493 "CPE610(TP-LINK|UN|N300-5|00000000):2.0\r\n"
494 "CPE610(TP-LINK|UN|N300-5|45550000):2.0\r\n"
495 "CPE610(TP-LINK|UN|N300-5|55530000):2.0\r\n"
496 "CPE610(TP-LINK|US|N300-5|55530000):2.0\r\n"
497 "CPE610(TP-LINK|UN|N300-5):2.0\r\n"
498 "CPE610(TP-LINK|EU|N300-5):2.0\r\n"
499 "CPE610(TP-LINK|US|N300-5):2.0\r\n",
500 .support_trail
= '\xff',
504 {"fs-uboot", 0x00000, 0x20000},
505 {"partition-table", 0x20000, 0x02000},
506 {"default-mac", 0x30000, 0x00020},
507 {"product-info", 0x31100, 0x00100},
508 {"signature", 0x32000, 0x00400},
509 {"os-image", 0x40000, 0x300000},
510 {"file-system", 0x340000, 0x470000},
511 {"soft-version", 0x7b0000, 0x00100},
512 {"support-list", 0x7b1000, 0x00400},
513 {"user-config", 0x7c0000, 0x10000},
514 {"default-config", 0x7d0000, 0x10000},
515 {"log", 0x7e0000, 0x10000},
516 {"radio", 0x7f0000, 0x10000},
520 .first_sysupgrade_partition
= "os-image",
521 .last_sysupgrade_partition
= "support-list",
526 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
529 "WBS210(TP-LINK|UN|N300-2):1.20\r\n"
530 "WBS210(TP-LINK|US|N300-2):1.20\r\n"
531 "WBS210(TP-LINK|EU|N300-2):1.20\r\n",
532 .support_trail
= '\xff',
536 {"fs-uboot", 0x00000, 0x20000},
537 {"partition-table", 0x20000, 0x02000},
538 {"default-mac", 0x30000, 0x00020},
539 {"product-info", 0x31100, 0x00100},
540 {"signature", 0x32000, 0x00400},
541 {"os-image", 0x40000, 0x300000},
542 {"file-system", 0x340000, 0x470000},
543 {"soft-version", 0x7b0000, 0x00100},
544 {"support-list", 0x7b1000, 0x00400},
545 {"user-config", 0x7c0000, 0x10000},
546 {"default-config", 0x7d0000, 0x10000},
547 {"log", 0x7e0000, 0x10000},
548 {"radio", 0x7f0000, 0x10000},
552 .first_sysupgrade_partition
= "os-image",
553 .last_sysupgrade_partition
= "support-list",
558 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
561 "WBS210(TP-LINK|UN|N300-2|00000000):2.0\r\n"
562 "WBS210(TP-LINK|US|N300-2|55530000):2.0\r\n"
563 "WBS210(TP-LINK|EU|N300-2|45550000):2.0\r\n",
564 .support_trail
= '\xff',
568 {"fs-uboot", 0x00000, 0x20000},
569 {"partition-table", 0x20000, 0x02000},
570 {"default-mac", 0x30000, 0x00020},
571 {"product-info", 0x31100, 0x00100},
572 {"signature", 0x32000, 0x00400},
573 {"os-image", 0x40000, 0x300000},
574 {"file-system", 0x340000, 0x470000},
575 {"soft-version", 0x7b0000, 0x00100},
576 {"support-list", 0x7b1000, 0x00400},
577 {"user-config", 0x7c0000, 0x10000},
578 {"default-config", 0x7d0000, 0x10000},
579 {"log", 0x7e0000, 0x10000},
580 {"radio", 0x7f0000, 0x10000},
584 .first_sysupgrade_partition
= "os-image",
585 .last_sysupgrade_partition
= "support-list",
590 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
593 "WBS510(TP-LINK|UN|N300-5):1.20\r\n"
594 "WBS510(TP-LINK|US|N300-5):1.20\r\n"
595 "WBS510(TP-LINK|EU|N300-5):1.20\r\n"
596 "WBS510(TP-LINK|CA|N300-5):1.20\r\n",
597 .support_trail
= '\xff',
601 {"fs-uboot", 0x00000, 0x20000},
602 {"partition-table", 0x20000, 0x02000},
603 {"default-mac", 0x30000, 0x00020},
604 {"product-info", 0x31100, 0x00100},
605 {"signature", 0x32000, 0x00400},
606 {"os-image", 0x40000, 0x300000},
607 {"file-system", 0x340000, 0x470000},
608 {"soft-version", 0x7b0000, 0x00100},
609 {"support-list", 0x7b1000, 0x00400},
610 {"user-config", 0x7c0000, 0x10000},
611 {"default-config", 0x7d0000, 0x10000},
612 {"log", 0x7e0000, 0x10000},
613 {"radio", 0x7f0000, 0x10000},
617 .first_sysupgrade_partition
= "os-image",
618 .last_sysupgrade_partition
= "support-list",
623 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
626 "WBS510(TP-LINK|UN|N300-5|00000000):2.0\r\n"
627 "WBS510(TP-LINK|US|N300-5|55530000):2.0\r\n"
628 "WBS510(TP-LINK|EU|N300-5|45550000):2.0\r\n"
629 "WBS510(TP-LINK|CA|N300-5|43410000):2.0\r\n",
630 .support_trail
= '\xff',
634 {"fs-uboot", 0x00000, 0x20000},
635 {"partition-table", 0x20000, 0x02000},
636 {"default-mac", 0x30000, 0x00020},
637 {"product-info", 0x31100, 0x00100},
638 {"signature", 0x32000, 0x00400},
639 {"os-image", 0x40000, 0x300000},
640 {"file-system", 0x340000, 0x470000},
641 {"soft-version", 0x7b0000, 0x00100},
642 {"support-list", 0x7b1000, 0x00400},
643 {"user-config", 0x7c0000, 0x10000},
644 {"default-config", 0x7d0000, 0x10000},
645 {"log", 0x7e0000, 0x10000},
646 {"radio", 0x7f0000, 0x10000},
650 .first_sysupgrade_partition
= "os-image",
651 .last_sysupgrade_partition
= "support-list",
654 /** Firmware layout for the C2600 */
660 "{product_name:Archer C2600,product_ver:1.0.0,special_id:00000000}\r\n",
661 .support_trail
= '\x00',
665 We use a bigger os-image partition than the stock images (and thus
666 smaller file-system), as our kernel doesn't fit in the stock firmware's
667 2 MB os-image since kernel 4.14.
670 {"SBL1", 0x00000, 0x20000},
671 {"MIBIB", 0x20000, 0x20000},
672 {"SBL2", 0x40000, 0x20000},
673 {"SBL3", 0x60000, 0x30000},
674 {"DDRCONFIG", 0x90000, 0x10000},
675 {"SSD", 0xa0000, 0x10000},
676 {"TZ", 0xb0000, 0x30000},
677 {"RPM", 0xe0000, 0x20000},
678 {"fs-uboot", 0x100000, 0x70000},
679 {"uboot-env", 0x170000, 0x40000},
680 {"radio", 0x1b0000, 0x40000},
681 {"os-image", 0x1f0000, 0x400000}, /* Stock: base 0x1f0000 size 0x200000 */
682 {"file-system", 0x5f0000, 0x1900000}, /* Stock: base 0x3f0000 size 0x1b00000 */
683 {"default-mac", 0x1ef0000, 0x00200},
684 {"pin", 0x1ef0200, 0x00200},
685 {"product-info", 0x1ef0400, 0x0fc00},
686 {"partition-table", 0x1f00000, 0x10000},
687 {"soft-version", 0x1f10000, 0x10000},
688 {"support-list", 0x1f20000, 0x10000},
689 {"profile", 0x1f30000, 0x10000},
690 {"default-config", 0x1f40000, 0x10000},
691 {"user-config", 0x1f50000, 0x40000},
692 {"qos-db", 0x1f90000, 0x40000},
693 {"usb-config", 0x1fd0000, 0x10000},
694 {"log", 0x1fe0000, 0x20000},
698 .first_sysupgrade_partition
= "os-image",
699 .last_sysupgrade_partition
= "file-system"
702 /** Firmware layout for the A7-V5 */
704 .id
= "ARCHER-A7-V5",
707 "{product_name:Archer A7,product_ver:5.0.0,special_id:45550000}\n"
708 "{product_name:Archer A7,product_ver:5.0.0,special_id:55530000}\n"
709 "{product_name:Archer A7,product_ver:5.0.0,special_id:43410000}\n"
710 "{product_name:Archer A7,product_ver:5.0.0,special_id:4A500000}\n"
711 "{product_name:Archer A7,product_ver:5.0.0,special_id:54570000}\n",
712 .support_trail
= '\x00',
713 .soft_ver
= "soft_ver:1.0.0\n",
715 /* We're using a dynamic kernel/rootfs split here */
717 {"factory-boot", 0x00000, 0x20000},
718 {"fs-uboot", 0x20000, 0x20000},
719 {"firmware", 0x40000, 0xec0000}, /* Stock: name os-image base 0x40000 size 0x120000 */
720 /* Stock: name file-system base 0x160000 size 0xda0000 */
721 {"default-mac", 0xf40000, 0x00200},
722 {"pin", 0xf40200, 0x00200},
723 {"device-id", 0xf40400, 0x00100},
724 {"product-info", 0xf40500, 0x0fb00},
725 {"soft-version", 0xf50000, 0x00100},
726 {"extra-para", 0xf51000, 0x01000},
727 {"support-list", 0xf52000, 0x0a000},
728 {"profile", 0xf5c000, 0x04000},
729 {"default-config", 0xf60000, 0x10000},
730 {"user-config", 0xf70000, 0x40000},
731 {"certificate", 0xfb0000, 0x10000},
732 {"partition-table", 0xfc0000, 0x10000},
733 {"log", 0xfd0000, 0x20000},
734 {"radio", 0xff0000, 0x10000},
738 .first_sysupgrade_partition
= "os-image",
739 .last_sysupgrade_partition
= "file-system",
742 /** Firmware layout for the C2v3 */
744 .id
= "ARCHER-C2-V3",
747 "{product_name:ArcherC2,product_ver:3.0.0,special_id:00000000}\n"
748 "{product_name:ArcherC2,product_ver:3.0.0,special_id:55530000}\n"
749 "{product_name:ArcherC2,product_ver:3.0.0,special_id:45550000}\n",
750 .support_trail
= '\x00',
751 .soft_ver
= "soft_ver:3.0.1\n",
753 /** We're using a dynamic kernel/rootfs split here */
756 {"factory-boot", 0x00000, 0x20000},
757 {"fs-uboot", 0x20000, 0x10000},
758 {"firmware", 0x30000, 0x7a0000},
759 {"user-config", 0x7d0000, 0x04000},
760 {"default-mac", 0x7e0000, 0x00100},
761 {"device-id", 0x7e0100, 0x00100},
762 {"extra-para", 0x7e0200, 0x00100},
763 {"pin", 0x7e0300, 0x00100},
764 {"support-list", 0x7e0400, 0x00400},
765 {"soft-version", 0x7e0800, 0x00400},
766 {"product-info", 0x7e0c00, 0x01400},
767 {"partition-table", 0x7e2000, 0x01000},
768 {"profile", 0x7e3000, 0x01000},
769 {"default-config", 0x7e4000, 0x04000},
770 {"merge-config", 0x7ec000, 0x02000},
771 {"qos-db", 0x7ee000, 0x02000},
772 {"radio", 0x7f0000, 0x10000},
776 .first_sysupgrade_partition
= "os-image",
777 .last_sysupgrade_partition
= "file-system",
780 /** Firmware layout for the C25v1 */
782 .id
= "ARCHER-C25-V1",
785 "{product_name:ArcherC25,product_ver:1.0.0,special_id:00000000}\n"
786 "{product_name:ArcherC25,product_ver:1.0.0,special_id:55530000}\n"
787 "{product_name:ArcherC25,product_ver:1.0.0,special_id:45550000}\n",
788 .support_trail
= '\x00',
789 .soft_ver
= "soft_ver:1.0.0\n",
791 /* We're using a dynamic kernel/rootfs split here */
793 {"factory-boot", 0x00000, 0x20000},
794 {"fs-uboot", 0x20000, 0x10000},
795 {"firmware", 0x30000, 0x7a0000}, /* Stock: name os-image base 0x30000 size 0x100000 */
796 /* Stock: name file-system base 0x130000 size 0x6a0000 */
797 {"user-config", 0x7d0000, 0x04000},
798 {"default-mac", 0x7e0000, 0x00100},
799 {"device-id", 0x7e0100, 0x00100},
800 {"extra-para", 0x7e0200, 0x00100},
801 {"pin", 0x7e0300, 0x00100},
802 {"support-list", 0x7e0400, 0x00400},
803 {"soft-version", 0x7e0800, 0x00400},
804 {"product-info", 0x7e0c00, 0x01400},
805 {"partition-table", 0x7e2000, 0x01000},
806 {"profile", 0x7e3000, 0x01000},
807 {"default-config", 0x7e4000, 0x04000},
808 {"merge-config", 0x7ec000, 0x02000},
809 {"qos-db", 0x7ee000, 0x02000},
810 {"radio", 0x7f0000, 0x10000},
814 .first_sysupgrade_partition
= "os-image",
815 .last_sysupgrade_partition
= "file-system",
818 /** Firmware layout for the C58v1 */
820 .id
= "ARCHER-C58-V1",
824 "{product_name:Archer C58,product_ver:1.0.0,special_id:00000000}\r\n"
825 "{product_name:Archer C58,product_ver:1.0.0,special_id:45550000}\r\n"
826 "{product_name:Archer C58,product_ver:1.0.0,special_id:55530000}\r\n",
827 .support_trail
= '\x00',
828 .soft_ver
= "soft_ver:1.0.0\n",
831 {"fs-uboot", 0x00000, 0x10000},
832 {"default-mac", 0x10000, 0x00200},
833 {"pin", 0x10200, 0x00200},
834 {"product-info", 0x10400, 0x00100},
835 {"partition-table", 0x10500, 0x00800},
836 {"soft-version", 0x11300, 0x00200},
837 {"support-list", 0x11500, 0x00100},
838 {"device-id", 0x11600, 0x00100},
839 {"profile", 0x11700, 0x03900},
840 {"default-config", 0x15000, 0x04000},
841 {"user-config", 0x19000, 0x04000},
842 {"firmware", 0x20000, 0x7c8000},
843 {"certyficate", 0x7e8000, 0x08000},
844 {"radio", 0x7f0000, 0x10000},
848 .first_sysupgrade_partition
= "os-image",
849 .last_sysupgrade_partition
= "file-system",
852 /** Firmware layout for the C59v1 */
854 .id
= "ARCHER-C59-V1",
858 "{product_name:Archer C59,product_ver:1.0.0,special_id:00000000}\r\n"
859 "{product_name:Archer C59,product_ver:1.0.0,special_id:45550000}\r\n"
860 "{product_name:Archer C59,product_ver:1.0.0,special_id:52550000}\r\n"
861 "{product_name:Archer C59,product_ver:1.0.0,special_id:55530000}\r\n",
862 .support_trail
= '\x00',
863 .soft_ver
= "soft_ver:1.0.0\n",
865 /* We're using a dynamic kernel/rootfs split here */
867 {"fs-uboot", 0x00000, 0x10000},
868 {"default-mac", 0x10000, 0x00200},
869 {"pin", 0x10200, 0x00200},
870 {"device-id", 0x10400, 0x00100},
871 {"product-info", 0x10500, 0x0fb00},
872 {"firmware", 0x20000, 0xe30000},
873 {"partition-table", 0xe50000, 0x10000},
874 {"soft-version", 0xe60000, 0x10000},
875 {"support-list", 0xe70000, 0x10000},
876 {"profile", 0xe80000, 0x10000},
877 {"default-config", 0xe90000, 0x10000},
878 {"user-config", 0xea0000, 0x40000},
879 {"usb-config", 0xee0000, 0x10000},
880 {"certificate", 0xef0000, 0x10000},
881 {"qos-db", 0xf00000, 0x40000},
882 {"log", 0xfe0000, 0x10000},
883 {"radio", 0xff0000, 0x10000},
887 .first_sysupgrade_partition
= "os-image",
888 .last_sysupgrade_partition
= "file-system",
891 /** Firmware layout for the C59v2 */
893 .id
= "ARCHER-C59-V2",
897 "{product_name:Archer C59,product_ver:2.0.0,special_id:00000000}\r\n"
898 "{product_name:Archer C59,product_ver:2.0.0,special_id:45550000}\r\n"
899 "{product_name:Archer C59,product_ver:2.0.0,special_id:55530000}\r\n",
900 .support_trail
= '\x00',
901 .soft_ver
= "soft_ver:2.0.0 Build 20161206 rel.7303\n",
903 /** We're using a dynamic kernel/rootfs split here */
905 {"factory-boot", 0x00000, 0x20000},
906 {"fs-uboot", 0x20000, 0x10000},
907 {"default-mac", 0x30000, 0x00200},
908 {"pin", 0x30200, 0x00200},
909 {"device-id", 0x30400, 0x00100},
910 {"product-info", 0x30500, 0x0fb00},
911 {"firmware", 0x40000, 0xe10000},
912 {"partition-table", 0xe50000, 0x10000},
913 {"soft-version", 0xe60000, 0x10000},
914 {"support-list", 0xe70000, 0x10000},
915 {"profile", 0xe80000, 0x10000},
916 {"default-config", 0xe90000, 0x10000},
917 {"user-config", 0xea0000, 0x40000},
918 {"usb-config", 0xee0000, 0x10000},
919 {"certificate", 0xef0000, 0x10000},
920 {"extra-para", 0xf00000, 0x10000},
921 {"qos-db", 0xf10000, 0x30000},
922 {"log", 0xfe0000, 0x10000},
923 {"radio", 0xff0000, 0x10000},
927 .first_sysupgrade_partition
= "os-image",
928 .last_sysupgrade_partition
= "file-system",
931 /** Firmware layout for the Archer C6 v2 (EU/RU/JP) */
933 .id
= "ARCHER-C6-V2",
937 "{product_name:Archer C6,product_ver:2.0.0,special_id:45550000}\r\n"
938 "{product_name:Archer C6,product_ver:2.0.0,special_id:52550000}\r\n"
939 "{product_name:Archer C6,product_ver:2.0.0,special_id:4A500000}\r\n",
940 .support_trail
= '\x00',
941 .soft_ver
= "soft_ver:1.9.1\n",
944 {"fs-uboot", 0x00000, 0x20000},
945 {"default-mac", 0x20000, 0x00200},
946 {"pin", 0x20200, 0x00100},
947 {"product-info", 0x20300, 0x00200},
948 {"device-id", 0x20500, 0x0fb00},
949 {"firmware", 0x30000, 0x7a9400},
950 {"soft-version", 0x7d9400, 0x00100},
951 {"extra-para", 0x7d9500, 0x00100},
952 {"support-list", 0x7d9600, 0x00200},
953 {"profile", 0x7d9800, 0x03000},
954 {"default-config", 0x7dc800, 0x03000},
955 {"partition-table", 0x7df800, 0x00800},
956 {"user-config", 0x7e0000, 0x0c000},
957 {"certificate", 0x7ec000, 0x04000},
958 {"radio", 0x7f0000, 0x10000},
962 .first_sysupgrade_partition
= "os-image",
963 .last_sysupgrade_partition
= "file-system",
966 /** Firmware layout for the Archer C6 v2 (US) and A6 v2 (US/TW) */
968 .id
= "ARCHER-C6-V2-US",
972 "{product_name:Archer A6,product_ver:2.0.0,special_id:55530000}\n"
973 "{product_name:Archer A6,product_ver:2.0.0,special_id:54570000}\n"
974 "{product_name:Archer C6,product_ver:2.0.0,special_id:55530000}\n",
975 .support_trail
= '\x00',
976 .soft_ver
= "soft_ver:1.9.1\n",
979 {"factory-boot", 0x00000, 0x20000},
980 {"default-mac", 0x20000, 0x00200},
981 {"pin", 0x20200, 0x00100},
982 {"product-info", 0x20300, 0x00200},
983 {"device-id", 0x20500, 0x0fb00},
984 {"fs-uboot", 0x30000, 0x20000},
985 {"firmware", 0x50000, 0xf89400},
986 {"soft-version", 0xfd9400, 0x00100},
987 {"extra-para", 0xfd9500, 0x00100},
988 {"support-list", 0xfd9600, 0x00200},
989 {"profile", 0xfd9800, 0x03000},
990 {"default-config", 0xfdc800, 0x03000},
991 {"partition-table", 0xfdf800, 0x00800},
992 {"user-config", 0xfe0000, 0x0c000},
993 {"certificate", 0xfec000, 0x04000},
994 {"radio", 0xff0000, 0x10000},
997 .first_sysupgrade_partition
= "os-image",
998 .last_sysupgrade_partition
= "file-system",
1001 /** Firmware layout for the C60v1 */
1003 .id
= "ARCHER-C60-V1",
1007 "{product_name:Archer C60,product_ver:1.0.0,special_id:00000000}\r\n"
1008 "{product_name:Archer C60,product_ver:1.0.0,special_id:45550000}\r\n"
1009 "{product_name:Archer C60,product_ver:1.0.0,special_id:55530000}\r\n",
1010 .support_trail
= '\x00',
1011 .soft_ver
= "soft_ver:1.0.0\n",
1014 {"fs-uboot", 0x00000, 0x10000},
1015 {"default-mac", 0x10000, 0x00200},
1016 {"pin", 0x10200, 0x00200},
1017 {"product-info", 0x10400, 0x00100},
1018 {"partition-table", 0x10500, 0x00800},
1019 {"soft-version", 0x11300, 0x00200},
1020 {"support-list", 0x11500, 0x00100},
1021 {"device-id", 0x11600, 0x00100},
1022 {"profile", 0x11700, 0x03900},
1023 {"default-config", 0x15000, 0x04000},
1024 {"user-config", 0x19000, 0x04000},
1025 {"firmware", 0x20000, 0x7c8000},
1026 {"certyficate", 0x7e8000, 0x08000},
1027 {"radio", 0x7f0000, 0x10000},
1031 .first_sysupgrade_partition
= "os-image",
1032 .last_sysupgrade_partition
= "file-system",
1035 /** Firmware layout for the C60v2 */
1037 .id
= "ARCHER-C60-V2",
1041 "{product_name:Archer C60,product_ver:2.0.0,special_id:42520000}\r\n"
1042 "{product_name:Archer C60,product_ver:2.0.0,special_id:45550000}\r\n"
1043 "{product_name:Archer C60,product_ver:2.0.0,special_id:55530000}\r\n",
1044 .support_trail
= '\x00',
1045 .soft_ver
= "soft_ver:2.0.0\n",
1048 {"factory-boot", 0x00000, 0x1fb00},
1049 {"default-mac", 0x1fb00, 0x00200},
1050 {"pin", 0x1fd00, 0x00100},
1051 {"product-info", 0x1fe00, 0x00100},
1052 {"device-id", 0x1ff00, 0x00100},
1053 {"fs-uboot", 0x20000, 0x10000},
1054 {"firmware", 0x30000, 0x7a0000},
1055 {"soft-version", 0x7d9500, 0x00100},
1056 {"support-list", 0x7d9600, 0x00100},
1057 {"extra-para", 0x7d9700, 0x00100},
1058 {"profile", 0x7d9800, 0x03000},
1059 {"default-config", 0x7dc800, 0x03000},
1060 {"partition-table", 0x7df800, 0x00800},
1061 {"user-config", 0x7e0000, 0x0c000},
1062 {"certificate", 0x7ec000, 0x04000},
1063 {"radio", 0x7f0000, 0x10000},
1067 .first_sysupgrade_partition
= "os-image",
1068 .last_sysupgrade_partition
= "file-system",
1071 /** Firmware layout for the C60v3 */
1073 .id
= "ARCHER-C60-V3",
1077 "{product_name:Archer C60,product_ver:3.0.0,special_id:42520000}\r\n"
1078 "{product_name:Archer C60,product_ver:3.0.0,special_id:45550000}\r\n"
1079 "{product_name:Archer C60,product_ver:3.0.0,special_id:55530000}\r\n",
1080 .support_trail
= '\x00',
1081 .soft_ver
= "soft_ver:3.0.0\n",
1084 {"factory-boot", 0x00000, 0x1fb00},
1085 {"default-mac", 0x1fb00, 0x00200},
1086 {"pin", 0x1fd00, 0x00100},
1087 {"product-info", 0x1fe00, 0x00100},
1088 {"device-id", 0x1ff00, 0x00100},
1089 {"fs-uboot", 0x20000, 0x10000},
1090 {"firmware", 0x30000, 0x7a0000},
1091 {"soft-version", 0x7d9500, 0x00100},
1092 {"support-list", 0x7d9600, 0x00100},
1093 {"extra-para", 0x7d9700, 0x00100},
1094 {"profile", 0x7d9800, 0x03000},
1095 {"default-config", 0x7dc800, 0x03000},
1096 {"partition-table", 0x7df800, 0x00800},
1097 {"user-config", 0x7e0000, 0x0c000},
1098 {"certificate", 0x7ec000, 0x04000},
1099 {"radio", 0x7f0000, 0x10000},
1103 .first_sysupgrade_partition
= "os-image",
1104 .last_sysupgrade_partition
= "file-system",
1107 /** Firmware layout for the C5 */
1109 .id
= "ARCHER-C5-V2",
1113 "{product_name:ArcherC5,product_ver:2.0.0,special_id:00000000}\r\n"
1114 "{product_name:ArcherC5,product_ver:2.0.0,special_id:55530000}\r\n"
1115 "{product_name:ArcherC5,product_ver:2.0.0,special_id:4A500000}\r\n", /* JP version */
1116 .support_trail
= '\x00',
1120 {"fs-uboot", 0x00000, 0x40000},
1121 {"os-image", 0x40000, 0x200000},
1122 {"file-system", 0x240000, 0xc00000},
1123 {"default-mac", 0xe40000, 0x00200},
1124 {"pin", 0xe40200, 0x00200},
1125 {"product-info", 0xe40400, 0x00200},
1126 {"partition-table", 0xe50000, 0x10000},
1127 {"soft-version", 0xe60000, 0x00200},
1128 {"support-list", 0xe61000, 0x0f000},
1129 {"profile", 0xe70000, 0x10000},
1130 {"default-config", 0xe80000, 0x10000},
1131 {"user-config", 0xe90000, 0x50000},
1132 {"log", 0xee0000, 0x100000},
1133 {"radio_bk", 0xfe0000, 0x10000},
1134 {"radio", 0xff0000, 0x10000},
1138 .first_sysupgrade_partition
= "os-image",
1139 .last_sysupgrade_partition
= "file-system"
1142 /** Firmware layout for the C7 */
1144 .id
= "ARCHER-C7-V4",
1147 "{product_name:Archer C7,product_ver:4.0.0,special_id:00000000}\n"
1148 "{product_name:Archer C7,product_ver:4.0.0,special_id:41550000}\n"
1149 "{product_name:Archer C7,product_ver:4.0.0,special_id:45550000}\n"
1150 "{product_name:Archer C7,product_ver:4.0.0,special_id:4B520000}\n"
1151 "{product_name:Archer C7,product_ver:4.0.0,special_id:42520000}\n"
1152 "{product_name:Archer C7,product_ver:4.0.0,special_id:4A500000}\n"
1153 "{product_name:Archer C7,product_ver:4.0.0,special_id:52550000}\n"
1154 "{product_name:Archer C7,product_ver:4.0.0,special_id:54570000}\n"
1155 "{product_name:Archer C7,product_ver:4.0.0,special_id:55530000}\n"
1156 "{product_name:Archer C7,product_ver:4.0.0,special_id:43410000}\n",
1157 .support_trail
= '\x00',
1158 .soft_ver
= "soft_ver:1.0.0\n",
1160 /* We're using a dynamic kernel/rootfs split here */
1162 {"factory-boot", 0x00000, 0x20000},
1163 {"fs-uboot", 0x20000, 0x20000},
1164 {"firmware", 0x40000, 0xEC0000}, /* Stock: name os-image base 0x40000 size 0x120000 */
1165 /* Stock: name file-system base 0x160000 size 0xda0000 */
1166 {"default-mac", 0xf00000, 0x00200},
1167 {"pin", 0xf00200, 0x00200},
1168 {"device-id", 0xf00400, 0x00100},
1169 {"product-info", 0xf00500, 0x0fb00},
1170 {"soft-version", 0xf10000, 0x00100},
1171 {"extra-para", 0xf11000, 0x01000},
1172 {"support-list", 0xf12000, 0x0a000},
1173 {"profile", 0xf1c000, 0x04000},
1174 {"default-config", 0xf20000, 0x10000},
1175 {"user-config", 0xf30000, 0x40000},
1176 {"qos-db", 0xf70000, 0x40000},
1177 {"certificate", 0xfb0000, 0x10000},
1178 {"partition-table", 0xfc0000, 0x10000},
1179 {"log", 0xfd0000, 0x20000},
1180 {"radio", 0xff0000, 0x10000},
1184 .first_sysupgrade_partition
= "os-image",
1185 .last_sysupgrade_partition
= "file-system",
1188 /** Firmware layout for the C7 v5*/
1190 .id
= "ARCHER-C7-V5",
1193 "{product_name:Archer C7,product_ver:5.0.0,special_id:00000000}\n"
1194 "{product_name:Archer C7,product_ver:5.0.0,special_id:45550000}\n"
1195 "{product_name:Archer C7,product_ver:5.0.0,special_id:55530000}\n"
1196 "{product_name:Archer C7,product_ver:5.0.0,special_id:43410000}\n"
1197 "{product_name:Archer C7,product_ver:5.0.0,special_id:4A500000}\n"
1198 "{product_name:Archer C7,product_ver:5.0.0,special_id:54570000}\n"
1199 "{product_name:Archer C7,product_ver:5.0.0,special_id:52550000}\n"
1200 "{product_name:Archer C7,product_ver:5.0.0,special_id:4B520000}\n",
1202 .support_trail
= '\x00',
1203 .soft_ver
= "soft_ver:1.0.0\n",
1205 /* We're using a dynamic kernel/rootfs split here */
1207 {"factory-boot", 0x00000, 0x20000},
1208 {"fs-uboot", 0x20000, 0x20000},
1209 {"partition-table", 0x40000, 0x10000},
1210 {"radio", 0x50000, 0x10000},
1211 {"default-mac", 0x60000, 0x00200},
1212 {"pin", 0x60200, 0x00200},
1213 {"device-id", 0x60400, 0x00100},
1214 {"product-info", 0x60500, 0x0fb00},
1215 {"soft-version", 0x70000, 0x01000},
1216 {"extra-para", 0x71000, 0x01000},
1217 {"support-list", 0x72000, 0x0a000},
1218 {"profile", 0x7c000, 0x04000},
1219 {"user-config", 0x80000, 0x40000},
1222 {"firmware", 0xc0000, 0xf00000}, /* Stock: name os-image base 0xc0000 size 0x120000 */
1223 /* Stock: name file-system base 0x1e0000 size 0xde0000 */
1225 {"log", 0xfc0000, 0x20000},
1226 {"certificate", 0xfe0000, 0x10000},
1227 {"default-config", 0xff0000, 0x10000},
1232 .first_sysupgrade_partition
= "os-image",
1233 .last_sysupgrade_partition
= "file-system",
1236 /** Firmware layout for the C9 */
1242 "{product_name:ArcherC9,"
1243 "product_ver:1.0.0,"
1244 "special_id:00000000}\n",
1245 .support_trail
= '\x00',
1249 {"fs-uboot", 0x00000, 0x40000},
1250 {"os-image", 0x40000, 0x200000},
1251 {"file-system", 0x240000, 0xc00000},
1252 {"default-mac", 0xe40000, 0x00200},
1253 {"pin", 0xe40200, 0x00200},
1254 {"product-info", 0xe40400, 0x00200},
1255 {"partition-table", 0xe50000, 0x10000},
1256 {"soft-version", 0xe60000, 0x00200},
1257 {"support-list", 0xe61000, 0x0f000},
1258 {"profile", 0xe70000, 0x10000},
1259 {"default-config", 0xe80000, 0x10000},
1260 {"user-config", 0xe90000, 0x50000},
1261 {"log", 0xee0000, 0x100000},
1262 {"radio_bk", 0xfe0000, 0x10000},
1263 {"radio", 0xff0000, 0x10000},
1267 .first_sysupgrade_partition
= "os-image",
1268 .last_sysupgrade_partition
= "file-system"
1271 /** Firmware layout for the EAP120 */
1274 .vendor
= "EAP120(TP-LINK|UN|N300-2):1.0\r\n",
1277 "EAP120(TP-LINK|UN|N300-2):1.0\r\n",
1278 .support_trail
= '\xff',
1282 {"fs-uboot", 0x00000, 0x20000},
1283 {"partition-table", 0x20000, 0x02000},
1284 {"default-mac", 0x30000, 0x00020},
1285 {"support-list", 0x31000, 0x00100},
1286 {"product-info", 0x31100, 0x00100},
1287 {"soft-version", 0x32000, 0x00100},
1288 {"os-image", 0x40000, 0x180000},
1289 {"file-system", 0x1c0000, 0x600000},
1290 {"user-config", 0x7c0000, 0x10000},
1291 {"backup-config", 0x7d0000, 0x10000},
1292 {"log", 0x7e0000, 0x10000},
1293 {"radio", 0x7f0000, 0x10000},
1297 .first_sysupgrade_partition
= "os-image",
1298 .last_sysupgrade_partition
= "file-system"
1301 /** Firmware layout for the EAP225-Outdoor v1 */
1303 .id
= "EAP225-OUTDOOR-V1",
1306 "EAP225-Outdoor(TP-Link|UN|AC1200-D):1.0\r\n",
1307 .support_trail
= '\xff',
1309 .soft_ver_compat_level
= 1,
1312 {"fs-uboot", 0x00000, 0x20000},
1313 {"partition-table", 0x20000, 0x02000},
1314 {"default-mac", 0x30000, 0x01000},
1315 {"support-list", 0x31000, 0x00100},
1316 {"product-info", 0x31100, 0x00400},
1317 {"soft-version", 0x32000, 0x00100},
1318 {"firmware", 0x40000, 0xd80000},
1319 {"user-config", 0xdc0000, 0x30000},
1320 {"mutil-log", 0xf30000, 0x80000},
1321 {"oops", 0xfb0000, 0x40000},
1322 {"radio", 0xff0000, 0x10000},
1326 .first_sysupgrade_partition
= "os-image",
1327 .last_sysupgrade_partition
= "file-system"
1330 /** Firmware layout for the EAP225-Wall v2 */
1332 .id
= "EAP225-WALL-V2",
1335 "EAP225-Wall(TP-Link|UN|AC1200-D):2.0\r\n",
1336 .support_trail
= '\xff',
1338 .soft_ver_compat_level
= 1,
1341 {"fs-uboot", 0x00000, 0x20000},
1342 {"partition-table", 0x20000, 0x02000},
1343 {"default-mac", 0x30000, 0x01000},
1344 {"support-list", 0x31000, 0x00100},
1345 {"product-info", 0x31100, 0x00400},
1346 {"soft-version", 0x32000, 0x00100},
1347 {"firmware", 0x40000, 0xd80000},
1348 {"user-config", 0xdc0000, 0x30000},
1349 {"mutil-log", 0xf30000, 0x80000},
1350 {"oops", 0xfb0000, 0x40000},
1351 {"radio", 0xff0000, 0x10000},
1355 .first_sysupgrade_partition
= "os-image",
1356 .last_sysupgrade_partition
= "file-system"
1359 /** Firmware layout for the EAP245 v1 */
1364 "EAP245(TP-LINK|UN|AC1750-D):1.0\r\n",
1365 .support_trail
= '\xff',
1369 {"fs-uboot", 0x00000, 0x20000},
1370 {"partition-table", 0x20000, 0x02000},
1371 {"default-mac", 0x30000, 0x01000},
1372 {"support-list", 0x31000, 0x00100},
1373 {"product-info", 0x31100, 0x00400},
1374 {"soft-version", 0x32000, 0x00100},
1375 {"firmware", 0x40000, 0xd80000},
1376 {"user-config", 0xdc0000, 0x30000},
1377 {"radio", 0xff0000, 0x10000},
1381 .first_sysupgrade_partition
= "os-image",
1382 .last_sysupgrade_partition
= "file-system"
1385 /** Firmware layout for the EAP245 v3 */
1390 "EAP245(TP-Link|UN|AC1750-D):3.0\r\n",
1391 .support_trail
= '\xff',
1393 .soft_ver_compat_level
= 1,
1395 /** Firmware partition with dynamic kernel/rootfs split */
1397 {"factroy-boot", 0x00000, 0x40000},
1398 {"fs-uboot", 0x40000, 0x40000},
1399 {"partition-table", 0x80000, 0x10000},
1400 {"default-mac", 0x90000, 0x01000},
1401 {"support-list", 0x91000, 0x00100},
1402 {"product-info", 0x91100, 0x00400},
1403 {"soft-version", 0x92000, 0x00100},
1404 {"radio", 0xa0000, 0x10000},
1405 {"extra-para", 0xb0000, 0x10000},
1406 {"firmware", 0xc0000, 0xe40000},
1407 {"config", 0xf00000, 0x30000},
1408 {"mutil-log", 0xf30000, 0x80000},
1409 {"oops", 0xfb0000, 0x40000},
1413 .first_sysupgrade_partition
= "os-image",
1414 .last_sysupgrade_partition
= "file-system"
1417 /** Firmware layout for the TL-WA850RE v2 */
1419 .id
= "TLWA850REV2",
1423 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:55530000}\n"
1424 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:00000000}\n"
1425 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:55534100}\n"
1426 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:45550000}\n"
1427 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:4B520000}\n"
1428 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:42520000}\n"
1429 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:4A500000}\n"
1430 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:43410000}\n"
1431 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:41550000}\n"
1432 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:52550000}\n",
1433 .support_trail
= '\x00',
1437 576KB were moved from file-system to os-image
1438 in comparison to the stock image
1441 {"fs-uboot", 0x00000, 0x20000},
1442 {"firmware", 0x20000, 0x390000},
1443 {"partition-table", 0x3b0000, 0x02000},
1444 {"default-mac", 0x3c0000, 0x00020},
1445 {"pin", 0x3c0100, 0x00020},
1446 {"product-info", 0x3c1000, 0x01000},
1447 {"soft-version", 0x3c2000, 0x00100},
1448 {"support-list", 0x3c3000, 0x01000},
1449 {"profile", 0x3c4000, 0x08000},
1450 {"user-config", 0x3d0000, 0x10000},
1451 {"default-config", 0x3e0000, 0x10000},
1452 {"radio", 0x3f0000, 0x10000},
1456 .first_sysupgrade_partition
= "os-image",
1457 .last_sysupgrade_partition
= "file-system"
1460 /** Firmware layout for the TL-WA855RE v1 */
1462 .id
= "TLWA855REV1",
1466 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:00000000}\n"
1467 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:55530000}\n"
1468 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:45550000}\n"
1469 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:4B520000}\n"
1470 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:42520000}\n"
1471 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:4A500000}\n"
1472 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:43410000}\n"
1473 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:41550000}\n"
1474 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:52550000}\n",
1475 .support_trail
= '\x00',
1479 {"fs-uboot", 0x00000, 0x20000},
1480 {"os-image", 0x20000, 0x150000},
1481 {"file-system", 0x170000, 0x240000},
1482 {"partition-table", 0x3b0000, 0x02000},
1483 {"default-mac", 0x3c0000, 0x00020},
1484 {"pin", 0x3c0100, 0x00020},
1485 {"product-info", 0x3c1000, 0x01000},
1486 {"soft-version", 0x3c2000, 0x00100},
1487 {"support-list", 0x3c3000, 0x01000},
1488 {"profile", 0x3c4000, 0x08000},
1489 {"user-config", 0x3d0000, 0x10000},
1490 {"default-config", 0x3e0000, 0x10000},
1491 {"radio", 0x3f0000, 0x10000},
1495 .first_sysupgrade_partition
= "os-image",
1496 .last_sysupgrade_partition
= "file-system"
1499 /** Firmware layout for the TL-WPA8630P v2 (EU)*/
1501 .id
= "TL-WPA8630P-V2.0-EU",
1505 "{product_name:TL-WPA8630P,product_ver:2.0.0,special_id:45550000}\n",
1506 .support_trail
= '\x00',
1510 {"factory-uboot", 0x00000, 0x20000},
1511 {"fs-uboot", 0x20000, 0x20000},
1512 {"firmware", 0x40000, 0x5e0000},
1513 {"partition-table", 0x620000, 0x02000},
1514 {"default-mac", 0x630000, 0x00020},
1515 {"pin", 0x630100, 0x00020},
1516 {"device-id", 0x630200, 0x00030},
1517 {"product-info", 0x631100, 0x01000},
1518 {"extra-para", 0x632100, 0x01000},
1519 {"soft-version", 0x640000, 0x01000},
1520 {"support-list", 0x641000, 0x01000},
1521 {"profile", 0x642000, 0x08000},
1522 {"user-config", 0x650000, 0x10000},
1523 {"default-config", 0x660000, 0x10000},
1524 {"default-nvm", 0x670000, 0xc0000},
1525 {"default-pib", 0x730000, 0x40000},
1526 {"radio", 0x7f0000, 0x10000},
1530 .first_sysupgrade_partition
= "os-image",
1531 .last_sysupgrade_partition
= "file-system"
1534 /** Firmware layout for the TL-WPA8630P v2 (INT)*/
1536 .id
= "TL-WPA8630P-V2-INT",
1540 "{product_name:TL-WPA8630P,product_ver:2.0.0,special_id:41550000}\n"
1541 "{product_name:TL-WPA8630P,product_ver:2.0.0,special_id:44450000}\n"
1542 "{product_name:TL-WPA8630P,product_ver:2.1.0,special_id:41550000}\n",
1543 .support_trail
= '\x00',
1547 {"factory-uboot", 0x00000, 0x20000},
1548 {"fs-uboot", 0x20000, 0x20000},
1549 {"firmware", 0x40000, 0x5e0000},
1550 {"partition-table", 0x620000, 0x02000},
1551 {"extra-para", 0x632100, 0x01000},
1552 {"soft-version", 0x640000, 0x01000},
1553 {"support-list", 0x641000, 0x01000},
1554 {"profile", 0x642000, 0x08000},
1555 {"user-config", 0x650000, 0x10000},
1556 {"default-config", 0x660000, 0x10000},
1557 {"default-nvm", 0x670000, 0xc0000},
1558 {"default-pib", 0x730000, 0x40000},
1559 {"default-mac", 0x7e0000, 0x00020},
1560 {"pin", 0x7e0100, 0x00020},
1561 {"device-id", 0x7e0200, 0x00030},
1562 {"product-info", 0x7e1100, 0x01000},
1563 {"radio", 0x7f0000, 0x10000},
1567 .first_sysupgrade_partition
= "os-image",
1568 .last_sysupgrade_partition
= "file-system"
1571 /** Firmware layout for the TL-WPA8630P v2.1 (EU)*/
1573 .id
= "TL-WPA8630P-V2.1-EU",
1577 "{product_name:TL-WPA8630P,product_ver:2.1.0,special_id:45550000}\n",
1578 .support_trail
= '\x00',
1582 {"factory-uboot", 0x00000, 0x20000},
1583 {"fs-uboot", 0x20000, 0x20000},
1584 {"firmware", 0x40000, 0x5e0000},
1585 {"extra-para", 0x680000, 0x01000},
1586 {"product-info", 0x690000, 0x01000},
1587 {"partition-table", 0x6a0000, 0x02000},
1588 {"soft-version", 0x6b0000, 0x01000},
1589 {"support-list", 0x6b1000, 0x01000},
1590 {"profile", 0x6b2000, 0x08000},
1591 {"user-config", 0x6c0000, 0x10000},
1592 {"default-config", 0x6d0000, 0x10000},
1593 {"default-nvm", 0x6e0000, 0xc0000},
1594 {"default-pib", 0x7a0000, 0x40000},
1595 {"default-mac", 0x7e0000, 0x00020},
1596 {"pin", 0x7e0100, 0x00020},
1597 {"device-id", 0x7e0200, 0x00030},
1598 {"radio", 0x7f0000, 0x10000},
1602 .first_sysupgrade_partition
= "os-image",
1603 .last_sysupgrade_partition
= "file-system"
1606 /** Firmware layout for the TL-WR1043 v5 */
1608 .id
= "TLWR1043NV5",
1612 "{product_name:TL-WR1043N,product_ver:5.0.0,special_id:45550000}\n"
1613 "{product_name:TL-WR1043N,product_ver:5.0.0,special_id:55530000}\n",
1614 .support_trail
= '\x00',
1615 .soft_ver
= "soft_ver:1.0.0\n",
1617 {"factory-boot", 0x00000, 0x20000},
1618 {"fs-uboot", 0x20000, 0x20000},
1619 {"firmware", 0x40000, 0xec0000},
1620 {"default-mac", 0xf00000, 0x00200},
1621 {"pin", 0xf00200, 0x00200},
1622 {"device-id", 0xf00400, 0x00100},
1623 {"product-info", 0xf00500, 0x0fb00},
1624 {"soft-version", 0xf10000, 0x01000},
1625 {"extra-para", 0xf11000, 0x01000},
1626 {"support-list", 0xf12000, 0x0a000},
1627 {"profile", 0xf1c000, 0x04000},
1628 {"default-config", 0xf20000, 0x10000},
1629 {"user-config", 0xf30000, 0x40000},
1630 {"qos-db", 0xf70000, 0x40000},
1631 {"certificate", 0xfb0000, 0x10000},
1632 {"partition-table", 0xfc0000, 0x10000},
1633 {"log", 0xfd0000, 0x20000},
1634 {"radio", 0xff0000, 0x10000},
1637 .first_sysupgrade_partition
= "os-image",
1638 .last_sysupgrade_partition
= "file-system"
1641 /** Firmware layout for the TL-WR1043 v4 */
1643 .id
= "TLWR1043NDV4",
1647 "{product_name:TL-WR1043ND,product_ver:4.0.0,special_id:45550000}\n",
1648 .support_trail
= '\x00',
1651 /* We're using a dynamic kernel/rootfs split here */
1653 {"fs-uboot", 0x00000, 0x20000},
1654 {"firmware", 0x20000, 0xf30000},
1655 {"default-mac", 0xf50000, 0x00200},
1656 {"pin", 0xf50200, 0x00200},
1657 {"product-info", 0xf50400, 0x0fc00},
1658 {"soft-version", 0xf60000, 0x0b000},
1659 {"support-list", 0xf6b000, 0x04000},
1660 {"profile", 0xf70000, 0x04000},
1661 {"default-config", 0xf74000, 0x0b000},
1662 {"user-config", 0xf80000, 0x40000},
1663 {"partition-table", 0xfc0000, 0x10000},
1664 {"log", 0xfd0000, 0x20000},
1665 {"radio", 0xff0000, 0x10000},
1669 .first_sysupgrade_partition
= "os-image",
1670 .last_sysupgrade_partition
= "file-system"
1673 /** Firmware layout for the TL-WR902AC v1 */
1675 .id
= "TL-WR902AC-V1",
1679 "{product_name:TL-WR902AC,product_ver:1.0.0,special_id:45550000}\n"
1680 "{product_name:TL-WR902AC,product_ver:1.0.0,special_id:55530000}\n",
1681 .support_trail
= '\x00',
1685 384KB were moved from file-system to os-image
1686 in comparison to the stock image
1689 {"fs-uboot", 0x00000, 0x20000},
1690 {"firmware", 0x20000, 0x730000},
1691 {"default-mac", 0x750000, 0x00200},
1692 {"pin", 0x750200, 0x00200},
1693 {"product-info", 0x750400, 0x0fc00},
1694 {"soft-version", 0x760000, 0x0b000},
1695 {"support-list", 0x76b000, 0x04000},
1696 {"profile", 0x770000, 0x04000},
1697 {"default-config", 0x774000, 0x0b000},
1698 {"user-config", 0x780000, 0x40000},
1699 {"partition-table", 0x7c0000, 0x10000},
1700 {"log", 0x7d0000, 0x20000},
1701 {"radio", 0x7f0000, 0x10000},
1705 .first_sysupgrade_partition
= "os-image",
1706 .last_sysupgrade_partition
= "file-system",
1709 /** Firmware layout for the TL-WR942N V1 */
1715 "{product_name:TL-WR942N,product_ver:1.0.0,special_id:00000000}\r\n"
1716 "{product_name:TL-WR942N,product_ver:1.0.0,special_id:52550000}\r\n",
1717 .support_trail
= '\x00',
1721 {"fs-uboot", 0x00000, 0x20000},
1722 {"firmware", 0x20000, 0xe20000},
1723 {"default-mac", 0xe40000, 0x00200},
1724 {"pin", 0xe40200, 0x00200},
1725 {"product-info", 0xe40400, 0x0fc00},
1726 {"partition-table", 0xe50000, 0x10000},
1727 {"soft-version", 0xe60000, 0x10000},
1728 {"support-list", 0xe70000, 0x10000},
1729 {"profile", 0xe80000, 0x10000},
1730 {"default-config", 0xe90000, 0x10000},
1731 {"user-config", 0xea0000, 0x40000},
1732 {"qos-db", 0xee0000, 0x40000},
1733 {"certificate", 0xf20000, 0x10000},
1734 {"usb-config", 0xfb0000, 0x10000},
1735 {"log", 0xfc0000, 0x20000},
1736 {"radio-bk", 0xfe0000, 0x10000},
1737 {"radio", 0xff0000, 0x10000},
1741 .first_sysupgrade_partition
= "os-image",
1742 .last_sysupgrade_partition
= "file-system",
1745 /** Firmware layout for the RE200 v2 */
1751 "{product_name:RE200,product_ver:2.0.0,special_id:00000000}\n"
1752 "{product_name:RE200,product_ver:2.0.0,special_id:41520000}\n"
1753 "{product_name:RE200,product_ver:2.0.0,special_id:41550000}\n"
1754 "{product_name:RE200,product_ver:2.0.0,special_id:42520000}\n"
1755 "{product_name:RE200,product_ver:2.0.0,special_id:43410000}\n"
1756 "{product_name:RE200,product_ver:2.0.0,special_id:45530000}\n"
1757 "{product_name:RE200,product_ver:2.0.0,special_id:45550000}\n"
1758 "{product_name:RE200,product_ver:2.0.0,special_id:49440000}\n"
1759 "{product_name:RE200,product_ver:2.0.0,special_id:4a500000}\n"
1760 "{product_name:RE200,product_ver:2.0.0,special_id:4b520000}\n"
1761 "{product_name:RE200,product_ver:2.0.0,special_id:52550000}\n"
1762 "{product_name:RE200,product_ver:2.0.0,special_id:54570000}\n"
1763 "{product_name:RE200,product_ver:2.0.0,special_id:55530000}\n",
1764 .support_trail
= '\x00',
1768 {"fs-uboot", 0x00000, 0x20000},
1769 {"firmware", 0x20000, 0x7a0000},
1770 {"partition-table", 0x7c0000, 0x02000},
1771 {"default-mac", 0x7c2000, 0x00020},
1772 {"pin", 0x7c2100, 0x00020},
1773 {"product-info", 0x7c3100, 0x01000},
1774 {"soft-version", 0x7c4200, 0x01000},
1775 {"support-list", 0x7c5200, 0x01000},
1776 {"profile", 0x7c6200, 0x08000},
1777 {"config-info", 0x7ce200, 0x00400},
1778 {"user-config", 0x7d0000, 0x10000},
1779 {"default-config", 0x7e0000, 0x10000},
1780 {"radio", 0x7f0000, 0x10000},
1784 .first_sysupgrade_partition
= "os-image",
1785 .last_sysupgrade_partition
= "file-system"
1788 /** Firmware layout for the RE200 v3 */
1794 "{product_name:RE200,product_ver:3.0.0,special_id:00000000}\n"
1795 "{product_name:RE200,product_ver:3.0.0,special_id:41520000}\n"
1796 "{product_name:RE200,product_ver:3.0.0,special_id:41550000}\n"
1797 "{product_name:RE200,product_ver:3.0.0,special_id:42520000}\n"
1798 "{product_name:RE200,product_ver:3.0.0,special_id:43410000}\n"
1799 "{product_name:RE200,product_ver:3.0.0,special_id:45470000}\n"
1800 "{product_name:RE200,product_ver:3.0.0,special_id:45530000}\n"
1801 "{product_name:RE200,product_ver:3.0.0,special_id:45550000}\n"
1802 "{product_name:RE200,product_ver:3.0.0,special_id:49440000}\n"
1803 "{product_name:RE200,product_ver:3.0.0,special_id:4A500000}\n"
1804 "{product_name:RE200,product_ver:3.0.0,special_id:4B520000}\n"
1805 "{product_name:RE200,product_ver:3.0.0,special_id:52550000}\n"
1806 "{product_name:RE200,product_ver:3.0.0,special_id:54570000}\n"
1807 "{product_name:RE200,product_ver:3.0.0,special_id:55530000}\n",
1808 .support_trail
= '\x00',
1812 {"fs-uboot", 0x00000, 0x20000},
1813 {"firmware", 0x20000, 0x7a0000},
1814 {"partition-table", 0x7c0000, 0x02000},
1815 {"default-mac", 0x7c2000, 0x00020},
1816 {"pin", 0x7c2100, 0x00020},
1817 {"product-info", 0x7c3100, 0x01000},
1818 {"soft-version", 0x7c4200, 0x01000},
1819 {"support-list", 0x7c5200, 0x01000},
1820 {"profile", 0x7c6200, 0x08000},
1821 {"config-info", 0x7ce200, 0x00400},
1822 {"user-config", 0x7d0000, 0x10000},
1823 {"default-config", 0x7e0000, 0x10000},
1824 {"radio", 0x7f0000, 0x10000},
1828 .first_sysupgrade_partition
= "os-image",
1829 .last_sysupgrade_partition
= "file-system"
1832 /** Firmware layout for the RE200 v4 */
1838 "{product_name:RE200,product_ver:4.0.0,special_id:00000000}\n"
1839 "{product_name:RE200,product_ver:4.0.0,special_id:45550000}\n"
1840 "{product_name:RE200,product_ver:4.0.0,special_id:4A500000}\n"
1841 "{product_name:RE200,product_ver:4.0.0,special_id:4B520000}\n"
1842 "{product_name:RE200,product_ver:4.0.0,special_id:43410000}\n"
1843 "{product_name:RE200,product_ver:4.0.0,special_id:41550000}\n"
1844 "{product_name:RE200,product_ver:4.0.0,special_id:42520000}\n"
1845 "{product_name:RE200,product_ver:4.0.0,special_id:55530000}\n"
1846 "{product_name:RE200,product_ver:4.0.0,special_id:41520000}\n"
1847 "{product_name:RE200,product_ver:4.0.0,special_id:52550000}\n"
1848 "{product_name:RE200,product_ver:4.0.0,special_id:54570000}\n"
1849 "{product_name:RE200,product_ver:4.0.0,special_id:45530000}\n"
1850 "{product_name:RE200,product_ver:4.0.0,special_id:49440000}\n"
1851 "{product_name:RE200,product_ver:4.0.0,special_id:45470000}\n",
1852 .support_trail
= '\x00',
1853 .soft_ver
= "soft_ver:1.1.0\n",
1856 {"fs-uboot", 0x00000, 0x20000},
1857 {"firmware", 0x20000, 0x7a0000},
1858 {"partition-table", 0x7c0000, 0x02000},
1859 {"default-mac", 0x7c2000, 0x00020},
1860 {"pin", 0x7c2100, 0x00020},
1861 {"product-info", 0x7c3100, 0x01000},
1862 {"soft-version", 0x7c4200, 0x01000},
1863 {"support-list", 0x7c5200, 0x01000},
1864 {"profile", 0x7c6200, 0x08000},
1865 {"config-info", 0x7ce200, 0x00400},
1866 {"user-config", 0x7d0000, 0x10000},
1867 {"default-config", 0x7e0000, 0x10000},
1868 {"radio", 0x7f0000, 0x10000},
1872 .first_sysupgrade_partition
= "os-image",
1873 .last_sysupgrade_partition
= "file-system"
1876 /** Firmware layout for the RE220 v2 */
1882 "{product_name:RE220,product_ver:2.0.0,special_id:00000000}\n"
1883 "{product_name:RE220,product_ver:2.0.0,special_id:41520000}\n"
1884 "{product_name:RE220,product_ver:2.0.0,special_id:41550000}\n"
1885 "{product_name:RE220,product_ver:2.0.0,special_id:42520000}\n"
1886 "{product_name:RE220,product_ver:2.0.0,special_id:43410000}\n"
1887 "{product_name:RE220,product_ver:2.0.0,special_id:45530000}\n"
1888 "{product_name:RE220,product_ver:2.0.0,special_id:45550000}\n"
1889 "{product_name:RE220,product_ver:2.0.0,special_id:49440000}\n"
1890 "{product_name:RE220,product_ver:2.0.0,special_id:4a500000}\n"
1891 "{product_name:RE220,product_ver:2.0.0,special_id:4b520000}\n"
1892 "{product_name:RE220,product_ver:2.0.0,special_id:52550000}\n"
1893 "{product_name:RE220,product_ver:2.0.0,special_id:54570000}\n"
1894 "{product_name:RE220,product_ver:2.0.0,special_id:55530000}\n",
1895 .support_trail
= '\x00',
1899 {"fs-uboot", 0x00000, 0x20000},
1900 {"firmware", 0x20000, 0x7a0000},
1901 {"partition-table", 0x7c0000, 0x02000},
1902 {"default-mac", 0x7c2000, 0x00020},
1903 {"pin", 0x7c2100, 0x00020},
1904 {"product-info", 0x7c3100, 0x01000},
1905 {"soft-version", 0x7c4200, 0x01000},
1906 {"support-list", 0x7c5200, 0x01000},
1907 {"profile", 0x7c6200, 0x08000},
1908 {"config-info", 0x7ce200, 0x00400},
1909 {"user-config", 0x7d0000, 0x10000},
1910 {"default-config", 0x7e0000, 0x10000},
1911 {"radio", 0x7f0000, 0x10000},
1915 .first_sysupgrade_partition
= "os-image",
1916 .last_sysupgrade_partition
= "file-system"
1919 /** Firmware layout for the RE305 v1 */
1925 "{product_name:RE305,product_ver:1.0.0,special_id:45550000}\n"
1926 "{product_name:RE305,product_ver:1.0.0,special_id:55530000}\n"
1927 "{product_name:RE305,product_ver:1.0.0,special_id:4a500000}\n"
1928 "{product_name:RE305,product_ver:1.0.0,special_id:42520000}\n"
1929 "{product_name:RE305,product_ver:1.0.0,special_id:4b520000}\n"
1930 "{product_name:RE305,product_ver:1.0.0,special_id:41550000}\n"
1931 "{product_name:RE305,product_ver:1.0.0,special_id:43410000}\n",
1932 .support_trail
= '\x00',
1936 {"fs-uboot", 0x00000, 0x20000},
1937 {"firmware", 0x20000, 0x5e0000},
1938 {"partition-table", 0x600000, 0x02000},
1939 {"default-mac", 0x610000, 0x00020},
1940 {"pin", 0x610100, 0x00020},
1941 {"product-info", 0x611100, 0x01000},
1942 {"soft-version", 0x620000, 0x01000},
1943 {"support-list", 0x621000, 0x01000},
1944 {"profile", 0x622000, 0x08000},
1945 {"user-config", 0x630000, 0x10000},
1946 {"default-config", 0x640000, 0x10000},
1947 {"radio", 0x7f0000, 0x10000},
1951 .first_sysupgrade_partition
= "os-image",
1952 .last_sysupgrade_partition
= "file-system"
1955 /** Firmware layout for the RE350 v1 */
1961 "{product_name:RE350,product_ver:1.0.0,special_id:45550000}\n"
1962 "{product_name:RE350,product_ver:1.0.0,special_id:00000000}\n"
1963 "{product_name:RE350,product_ver:1.0.0,special_id:41550000}\n"
1964 "{product_name:RE350,product_ver:1.0.0,special_id:55530000}\n"
1965 "{product_name:RE350,product_ver:1.0.0,special_id:43410000}\n"
1966 "{product_name:RE350,product_ver:1.0.0,special_id:4b520000}\n"
1967 "{product_name:RE350,product_ver:1.0.0,special_id:4a500000}\n",
1968 .support_trail
= '\x00',
1971 /** We're using a dynamic kernel/rootfs split here */
1973 {"fs-uboot", 0x00000, 0x20000},
1974 {"firmware", 0x20000, 0x5e0000},
1975 {"partition-table", 0x600000, 0x02000},
1976 {"default-mac", 0x610000, 0x00020},
1977 {"pin", 0x610100, 0x00020},
1978 {"product-info", 0x611100, 0x01000},
1979 {"soft-version", 0x620000, 0x01000},
1980 {"support-list", 0x621000, 0x01000},
1981 {"profile", 0x622000, 0x08000},
1982 {"user-config", 0x630000, 0x10000},
1983 {"default-config", 0x640000, 0x10000},
1984 {"radio", 0x7f0000, 0x10000},
1988 .first_sysupgrade_partition
= "os-image",
1989 .last_sysupgrade_partition
= "file-system"
1992 /** Firmware layout for the RE350K v1 */
1998 "{product_name:RE350K,product_ver:1.0.0,special_id:00000000,product_region:US}\n",
1999 .support_trail
= '\x00',
2002 /** We're using a dynamic kernel/rootfs split here */
2004 {"fs-uboot", 0x00000, 0x20000},
2005 {"firmware", 0x20000, 0xd70000},
2006 {"partition-table", 0xd90000, 0x02000},
2007 {"default-mac", 0xda0000, 0x00020},
2008 {"pin", 0xda0100, 0x00020},
2009 {"product-info", 0xda1100, 0x01000},
2010 {"soft-version", 0xdb0000, 0x01000},
2011 {"support-list", 0xdb1000, 0x01000},
2012 {"profile", 0xdb2000, 0x08000},
2013 {"user-config", 0xdc0000, 0x10000},
2014 {"default-config", 0xdd0000, 0x10000},
2015 {"device-id", 0xde0000, 0x00108},
2016 {"radio", 0xff0000, 0x10000},
2020 .first_sysupgrade_partition
= "os-image",
2021 .last_sysupgrade_partition
= "file-system"
2024 /** Firmware layout for the RE355 */
2030 "{product_name:RE355,product_ver:1.0.0,special_id:00000000}\r\n"
2031 "{product_name:RE355,product_ver:1.0.0,special_id:55530000}\r\n"
2032 "{product_name:RE355,product_ver:1.0.0,special_id:45550000}\r\n"
2033 "{product_name:RE355,product_ver:1.0.0,special_id:4A500000}\r\n"
2034 "{product_name:RE355,product_ver:1.0.0,special_id:43410000}\r\n"
2035 "{product_name:RE355,product_ver:1.0.0,special_id:41550000}\r\n"
2036 "{product_name:RE355,product_ver:1.0.0,special_id:4B520000}\r\n"
2037 "{product_name:RE355,product_ver:1.0.0,special_id:55534100}\r\n",
2038 .support_trail
= '\x00',
2041 /* We're using a dynamic kernel/rootfs split here */
2043 {"fs-uboot", 0x00000, 0x20000},
2044 {"firmware", 0x20000, 0x5e0000},
2045 {"partition-table", 0x600000, 0x02000},
2046 {"default-mac", 0x610000, 0x00020},
2047 {"pin", 0x610100, 0x00020},
2048 {"product-info", 0x611100, 0x01000},
2049 {"soft-version", 0x620000, 0x01000},
2050 {"support-list", 0x621000, 0x01000},
2051 {"profile", 0x622000, 0x08000},
2052 {"user-config", 0x630000, 0x10000},
2053 {"default-config", 0x640000, 0x10000},
2054 {"radio", 0x7f0000, 0x10000},
2058 .first_sysupgrade_partition
= "os-image",
2059 .last_sysupgrade_partition
= "file-system"
2062 /** Firmware layout for the RE450 */
2068 "{product_name:RE450,product_ver:1.0.0,special_id:00000000}\r\n"
2069 "{product_name:RE450,product_ver:1.0.0,special_id:55530000}\r\n"
2070 "{product_name:RE450,product_ver:1.0.0,special_id:45550000}\r\n"
2071 "{product_name:RE450,product_ver:1.0.0,special_id:4A500000}\r\n"
2072 "{product_name:RE450,product_ver:1.0.0,special_id:43410000}\r\n"
2073 "{product_name:RE450,product_ver:1.0.0,special_id:41550000}\r\n"
2074 "{product_name:RE450,product_ver:1.0.0,special_id:4B520000}\r\n"
2075 "{product_name:RE450,product_ver:1.0.0,special_id:55534100}\r\n",
2076 .support_trail
= '\x00',
2079 /** We're using a dynamic kernel/rootfs split here */
2081 {"fs-uboot", 0x00000, 0x20000},
2082 {"firmware", 0x20000, 0x5e0000},
2083 {"partition-table", 0x600000, 0x02000},
2084 {"default-mac", 0x610000, 0x00020},
2085 {"pin", 0x610100, 0x00020},
2086 {"product-info", 0x611100, 0x01000},
2087 {"soft-version", 0x620000, 0x01000},
2088 {"support-list", 0x621000, 0x01000},
2089 {"profile", 0x622000, 0x08000},
2090 {"user-config", 0x630000, 0x10000},
2091 {"default-config", 0x640000, 0x10000},
2092 {"radio", 0x7f0000, 0x10000},
2096 .first_sysupgrade_partition
= "os-image",
2097 .last_sysupgrade_partition
= "file-system"
2100 /** Firmware layout for the RE450 v2 */
2106 "{product_name:RE450,product_ver:2.0.0,special_id:00000000}\r\n"
2107 "{product_name:RE450,product_ver:2.0.0,special_id:55530000}\r\n"
2108 "{product_name:RE450,product_ver:2.0.0,special_id:45550000}\r\n"
2109 "{product_name:RE450,product_ver:2.0.0,special_id:4A500000}\r\n"
2110 "{product_name:RE450,product_ver:2.0.0,special_id:43410000}\r\n"
2111 "{product_name:RE450,product_ver:2.0.0,special_id:41550000}\r\n"
2112 "{product_name:RE450,product_ver:2.0.0,special_id:41530000}\r\n"
2113 "{product_name:RE450,product_ver:2.0.0,special_id:4B520000}\r\n"
2114 "{product_name:RE450,product_ver:2.0.0,special_id:42520000}\r\n",
2115 .support_trail
= '\x00',
2118 /* We're using a dynamic kernel/rootfs split here */
2120 {"fs-uboot", 0x00000, 0x20000},
2121 {"firmware", 0x20000, 0x5e0000},
2122 {"partition-table", 0x600000, 0x02000},
2123 {"default-mac", 0x610000, 0x00020},
2124 {"pin", 0x610100, 0x00020},
2125 {"product-info", 0x611100, 0x01000},
2126 {"soft-version", 0x620000, 0x01000},
2127 {"support-list", 0x621000, 0x01000},
2128 {"profile", 0x622000, 0x08000},
2129 {"user-config", 0x630000, 0x10000},
2130 {"default-config", 0x640000, 0x10000},
2131 {"radio", 0x7f0000, 0x10000},
2135 .first_sysupgrade_partition
= "os-image",
2136 .last_sysupgrade_partition
= "file-system"
2139 /** Firmware layout for the RE450 v3 */
2145 "{product_name:RE450,product_ver:3.0.0,special_id:00000000}\r\n"
2146 "{product_name:RE450,product_ver:3.0.0,special_id:55530000}\r\n"
2147 "{product_name:RE450,product_ver:3.0.0,special_id:45550000}\r\n"
2148 "{product_name:RE450,product_ver:3.0.0,special_id:4A500000}\r\n"
2149 "{product_name:RE450,product_ver:3.0.0,special_id:43410000}\r\n"
2150 "{product_name:RE450,product_ver:3.0.0,special_id:41550000}\r\n"
2151 "{product_name:RE450,product_ver:3.0.0,special_id:41530000}\r\n"
2152 "{product_name:RE450,product_ver:3.0.0,special_id:4B520000}\r\n"
2153 "{product_name:RE450,product_ver:3.0.0,special_id:42520000}\r\n",
2154 .support_trail
= '\x00',
2157 /* We're using a dynamic kernel/rootfs split here */
2159 {"fs-uboot", 0x00000, 0x20000},
2160 {"default-mac", 0x20000, 0x00020},
2161 {"pin", 0x20020, 0x00020},
2162 {"product-info", 0x21000, 0x01000},
2163 {"partition-table", 0x22000, 0x02000},
2164 {"soft-version", 0x24000, 0x01000},
2165 {"support-list", 0x25000, 0x01000},
2166 {"profile", 0x26000, 0x08000},
2167 {"user-config", 0x2e000, 0x10000},
2168 {"default-config", 0x3e000, 0x10000},
2169 {"config-info", 0x4e000, 0x00400},
2170 {"firmware", 0x50000, 0x7a0000},
2171 {"radio", 0x7f0000, 0x10000},
2175 .first_sysupgrade_partition
= "os-image",
2176 .last_sysupgrade_partition
= "file-system"
2179 /** Firmware layout for the RE500 */
2185 "{product_name:RE500,product_ver:1.0.0,special_id:00000000}\r\n"
2186 "{product_name:RE500,product_ver:1.0.0,special_id:55530000}\r\n"
2187 "{product_name:RE500,product_ver:1.0.0,special_id:45550000}\r\n"
2188 "{product_name:RE500,product_ver:1.0.0,special_id:4A500000}\r\n"
2189 "{product_name:RE500,product_ver:1.0.0,special_id:43410000}\r\n"
2190 "{product_name:RE500,product_ver:1.0.0,special_id:41550000}\r\n"
2191 "{product_name:RE500,product_ver:1.0.0,special_id:41530000}\r\n",
2192 .support_trail
= '\x00',
2195 /* We're using a dynamic kernel/rootfs split here */
2197 {"fs-uboot", 0x00000, 0x20000},
2198 {"firmware", 0x20000, 0xde0000},
2199 {"partition-table", 0xe00000, 0x02000},
2200 {"default-mac", 0xe10000, 0x00020},
2201 {"pin", 0xe10100, 0x00020},
2202 {"product-info", 0xe11100, 0x01000},
2203 {"soft-version", 0xe20000, 0x01000},
2204 {"support-list", 0xe21000, 0x01000},
2205 {"profile", 0xe22000, 0x08000},
2206 {"user-config", 0xe30000, 0x10000},
2207 {"default-config", 0xe40000, 0x10000},
2208 {"radio", 0xff0000, 0x10000},
2212 .first_sysupgrade_partition
= "os-image",
2213 .last_sysupgrade_partition
= "file-system"
2216 /** Firmware layout for the RE650 */
2222 "{product_name:RE650,product_ver:1.0.0,special_id:00000000}\r\n"
2223 "{product_name:RE650,product_ver:1.0.0,special_id:55530000}\r\n"
2224 "{product_name:RE650,product_ver:1.0.0,special_id:45550000}\r\n"
2225 "{product_name:RE650,product_ver:1.0.0,special_id:4A500000}\r\n"
2226 "{product_name:RE650,product_ver:1.0.0,special_id:43410000}\r\n"
2227 "{product_name:RE650,product_ver:1.0.0,special_id:41550000}\r\n"
2228 "{product_name:RE650,product_ver:1.0.0,special_id:41530000}\r\n",
2229 .support_trail
= '\x00',
2232 /* We're using a dynamic kernel/rootfs split here */
2234 {"fs-uboot", 0x00000, 0x20000},
2235 {"firmware", 0x20000, 0xde0000},
2236 {"partition-table", 0xe00000, 0x02000},
2237 {"default-mac", 0xe10000, 0x00020},
2238 {"pin", 0xe10100, 0x00020},
2239 {"product-info", 0xe11100, 0x01000},
2240 {"soft-version", 0xe20000, 0x01000},
2241 {"support-list", 0xe21000, 0x01000},
2242 {"profile", 0xe22000, 0x08000},
2243 {"user-config", 0xe30000, 0x10000},
2244 {"default-config", 0xe40000, 0x10000},
2245 {"radio", 0xff0000, 0x10000},
2249 .first_sysupgrade_partition
= "os-image",
2250 .last_sysupgrade_partition
= "file-system"
2256 #define error(_ret, _errno, _str, ...) \
2258 fprintf(stderr, _str ": %s\n", ## __VA_ARGS__, \
2259 strerror(_errno)); \
2265 /** Stores a uint32 as big endian */
2266 static inline void put32(uint8_t *buf
, uint32_t val
) {
2273 /** Allocates a new image partition */
2274 static struct image_partition_entry
alloc_image_partition(const char *name
, size_t len
) {
2275 struct image_partition_entry entry
= {name
, len
, malloc(len
)};
2277 error(1, errno
, "malloc");
2282 /** Frees an image partition */
2283 static void free_image_partition(struct image_partition_entry entry
) {
2287 static time_t source_date_epoch
= -1;
2288 static void set_source_date_epoch() {
2289 char *env
= getenv("SOURCE_DATE_EPOCH");
2293 source_date_epoch
= strtoull(env
, &endptr
, 10);
2294 if (errno
|| (endptr
&& *endptr
!= '\0')) {
2295 fprintf(stderr
, "Invalid SOURCE_DATE_EPOCH");
2301 /** Generates the partition-table partition */
2302 static struct image_partition_entry
make_partition_table(const struct flash_partition_entry
*p
) {
2303 struct image_partition_entry entry
= alloc_image_partition("partition-table", 0x800);
2305 char *s
= (char *)entry
.data
, *end
= (char *)(s
+entry
.size
);
2313 for (i
= 0; p
[i
].name
; i
++) {
2315 size_t w
= snprintf(s
, len
, "partition %s base 0x%05x size 0x%05x\n", p
[i
].name
, p
[i
].base
, p
[i
].size
);
2318 error(1, 0, "flash partition table overflow?");
2325 memset(s
, 0xff, end
-s
);
2331 /** Generates a binary-coded decimal representation of an integer in the range [0, 99] */
2332 static inline uint8_t bcd(uint8_t v
) {
2333 return 0x10 * (v
/10) + v
%10;
2337 /** Generates the soft-version partition */
2338 static struct image_partition_entry
make_soft_version(struct device_info
*info
, uint32_t rev
) {
2339 size_t part_len
= sizeof(struct soft_version
);
2340 if (info
->soft_ver_compat_level
> 0)
2341 part_len
+= sizeof(uint32_t);
2343 struct image_partition_entry entry
=
2344 alloc_image_partition("soft-version", part_len
+1);
2345 struct soft_version
*s
= (struct soft_version
*)entry
.data
;
2349 if (source_date_epoch
!= -1)
2350 t
= source_date_epoch
;
2351 else if (time(&t
) == (time_t)(-1))
2352 error(1, errno
, "time");
2354 struct tm
*tm
= gmtime(&t
);
2356 /* Partition contents size, minus 8 byte header and trailing byte */
2357 s
->data_len
= htonl(entry
.size
-9);
2361 s
->version_major
= 0;
2362 s
->version_minor
= 0;
2363 s
->version_patch
= 0;
2365 s
->year_hi
= bcd((1900+tm
->tm_year
)/100);
2366 s
->year_lo
= bcd(tm
->tm_year
%100);
2367 s
->month
= bcd(tm
->tm_mon
+1);
2368 s
->day
= bcd(tm
->tm_mday
);
2369 s
->rev
= htonl(rev
);
2371 if (info
->soft_ver_compat_level
> 0)
2372 *(uint32_t *)(entry
.data
+ sizeof(struct soft_version
)) =
2373 htonl(info
->soft_ver_compat_level
);
2375 entry
.data
[entry
.size
-1] = 0xff;
2380 static struct image_partition_entry
make_soft_version_from_string(const char *soft_ver
) {
2381 /** String length _including_ the terminating zero byte */
2382 uint32_t ver_len
= strlen(soft_ver
) + 1;
2383 /** Partition contains 64 bit header, the version string, and one additional null byte */
2384 size_t partition_len
= 2*sizeof(uint32_t) + ver_len
+ 1;
2385 struct image_partition_entry entry
= alloc_image_partition("soft-version", partition_len
);
2387 uint32_t *len
= (uint32_t *)entry
.data
;
2388 len
[0] = htonl(ver_len
);
2390 memcpy(&len
[2], soft_ver
, ver_len
);
2392 entry
.data
[partition_len
- 1] = 0;
2397 /** Generates the support-list partition */
2398 static struct image_partition_entry
make_support_list(struct device_info
*info
) {
2399 size_t len
= strlen(info
->support_list
);
2400 struct image_partition_entry entry
= alloc_image_partition("support-list", len
+ 9);
2402 put32(entry
.data
, len
);
2403 memset(entry
.data
+4, 0, 4);
2404 memcpy(entry
.data
+8, info
->support_list
, len
);
2405 entry
.data
[len
+8] = info
->support_trail
;
2410 /** Creates a new image partition with an arbitrary name from a file */
2411 static struct image_partition_entry
read_file(const char *part_name
, const char *filename
, bool add_jffs2_eof
, struct flash_partition_entry
*file_system_partition
) {
2412 struct stat statbuf
;
2414 if (stat(filename
, &statbuf
) < 0)
2415 error(1, errno
, "unable to stat file `%s'", filename
);
2417 size_t len
= statbuf
.st_size
;
2419 if (add_jffs2_eof
) {
2420 if (file_system_partition
)
2421 len
= ALIGN(len
+ file_system_partition
->base
, 0x10000) + sizeof(jffs2_eof_mark
) - file_system_partition
->base
;
2423 len
= ALIGN(len
, 0x10000) + sizeof(jffs2_eof_mark
);
2426 struct image_partition_entry entry
= alloc_image_partition(part_name
, len
);
2428 FILE *file
= fopen(filename
, "rb");
2430 error(1, errno
, "unable to open file `%s'", filename
);
2432 if (fread(entry
.data
, statbuf
.st_size
, 1, file
) != 1)
2433 error(1, errno
, "unable to read file `%s'", filename
);
2435 if (add_jffs2_eof
) {
2436 uint8_t *eof
= entry
.data
+ statbuf
.st_size
, *end
= entry
.data
+entry
.size
;
2438 memset(eof
, 0xff, end
- eof
- sizeof(jffs2_eof_mark
));
2439 memcpy(end
- sizeof(jffs2_eof_mark
), jffs2_eof_mark
, sizeof(jffs2_eof_mark
));
2447 /** Creates a new image partition from arbitrary data */
2448 static struct image_partition_entry
put_data(const char *part_name
, const char *datain
, size_t len
) {
2450 struct image_partition_entry entry
= alloc_image_partition(part_name
, len
);
2452 memcpy(entry
.data
, datain
, len
);
2458 Copies a list of image partitions into an image buffer and generates the image partition table while doing so
2460 Example image partition table:
2462 fwup-ptn partition-table base 0x00800 size 0x00800
2463 fwup-ptn os-image base 0x01000 size 0x113b45
2464 fwup-ptn file-system base 0x114b45 size 0x1d0004
2465 fwup-ptn support-list base 0x2e4b49 size 0x000d1
2467 Each line of the partition table is terminated with the bytes 09 0d 0a ("\t\r\n"),
2468 the end of the partition table is marked with a zero byte.
2470 The firmware image must contain at least the partition-table and support-list partitions
2471 to be accepted. There aren't any alignment constraints for the image partitions.
2473 The partition-table partition contains the actual flash layout; partitions
2474 from the image partition table are mapped to the corresponding flash partitions during
2475 the firmware upgrade. The support-list partition contains a list of devices supported by
2478 The base offsets in the firmware partition table are relative to the end
2479 of the vendor information block, so the partition-table partition will
2480 actually start at offset 0x1814 of the image.
2482 I think partition-table must be the first partition in the firmware image.
2484 static void put_partitions(uint8_t *buffer
, const struct flash_partition_entry
*flash_parts
, const struct image_partition_entry
*parts
) {
2486 char *image_pt
= (char *)buffer
, *end
= image_pt
+ 0x800;
2488 size_t base
= 0x800;
2489 for (i
= 0; parts
[i
].name
; i
++) {
2490 for (j
= 0; flash_parts
[j
].name
; j
++) {
2491 if (!strcmp(flash_parts
[j
].name
, parts
[i
].name
)) {
2492 if (parts
[i
].size
> flash_parts
[j
].size
)
2493 error(1, 0, "%s partition too big (more than %u bytes)", flash_parts
[j
].name
, (unsigned)flash_parts
[j
].size
);
2498 assert(flash_parts
[j
].name
);
2500 memcpy(buffer
+ base
, parts
[i
].data
, parts
[i
].size
);
2502 size_t len
= end
-image_pt
;
2503 size_t w
= snprintf(image_pt
, len
, "fwup-ptn %s base 0x%05x size 0x%05x\t\r\n", parts
[i
].name
, (unsigned)base
, (unsigned)parts
[i
].size
);
2506 error(1, 0, "image partition table overflow?");
2510 base
+= parts
[i
].size
;
2514 /** Generates and writes the image MD5 checksum */
2515 static void put_md5(uint8_t *md5
, uint8_t *buffer
, unsigned int len
) {
2519 MD5_Update(&ctx
, md5_salt
, (unsigned int)sizeof(md5_salt
));
2520 MD5_Update(&ctx
, buffer
, len
);
2521 MD5_Final(md5
, &ctx
);
2526 Generates the firmware image in factory format
2532 0000-0003 Image size (4 bytes, big endian)
2533 0004-0013 MD5 hash (hash of a 16 byte salt and the image data starting with byte 0x14)
2534 0014-0017 Vendor information length (without padding) (4 bytes, big endian)
2535 0018-1013 Vendor information (4092 bytes, padded with 0xff; there seem to be older
2536 (VxWorks-based) TP-LINK devices which use a smaller vendor information block)
2537 1014-1813 Image partition table (2048 bytes, padded with 0xff)
2538 1814-xxxx Firmware partitions
2540 static void * generate_factory_image(struct device_info
*info
, const struct image_partition_entry
*parts
, size_t *len
) {
2544 for (i
= 0; parts
[i
].name
; i
++)
2545 *len
+= parts
[i
].size
;
2547 uint8_t *image
= malloc(*len
);
2549 error(1, errno
, "malloc");
2551 memset(image
, 0xff, *len
);
2555 size_t vendor_len
= strlen(info
->vendor
);
2556 put32(image
+0x14, vendor_len
);
2557 memcpy(image
+0x18, info
->vendor
, vendor_len
);
2560 put_partitions(image
+ 0x1014, info
->partitions
, parts
);
2561 put_md5(image
+0x04, image
+0x14, *len
-0x14);
2567 Generates the firmware image in sysupgrade format
2569 This makes some assumptions about the provided flash and image partition tables and
2570 should be generalized when TP-LINK starts building its safeloader into hardware with
2571 different flash layouts.
2573 static void * generate_sysupgrade_image(struct device_info
*info
, const struct image_partition_entry
*image_parts
, size_t *len
) {
2575 size_t flash_first_partition_index
= 0;
2576 size_t flash_last_partition_index
= 0;
2577 const struct flash_partition_entry
*flash_first_partition
= NULL
;
2578 const struct flash_partition_entry
*flash_last_partition
= NULL
;
2579 const struct image_partition_entry
*image_last_partition
= NULL
;
2581 /** Find first and last partitions */
2582 for (i
= 0; info
->partitions
[i
].name
; i
++) {
2583 if (!strcmp(info
->partitions
[i
].name
, info
->first_sysupgrade_partition
)) {
2584 flash_first_partition
= &info
->partitions
[i
];
2585 flash_first_partition_index
= i
;
2586 } else if (!strcmp(info
->partitions
[i
].name
, info
->last_sysupgrade_partition
)) {
2587 flash_last_partition
= &info
->partitions
[i
];
2588 flash_last_partition_index
= i
;
2592 assert(flash_first_partition
&& flash_last_partition
);
2593 assert(flash_first_partition_index
< flash_last_partition_index
);
2595 /** Find last partition from image to calculate needed size */
2596 for (i
= 0; image_parts
[i
].name
; i
++) {
2597 if (!strcmp(image_parts
[i
].name
, info
->last_sysupgrade_partition
)) {
2598 image_last_partition
= &image_parts
[i
];
2603 assert(image_last_partition
);
2605 *len
= flash_last_partition
->base
- flash_first_partition
->base
+ image_last_partition
->size
;
2607 uint8_t *image
= malloc(*len
);
2609 error(1, errno
, "malloc");
2611 memset(image
, 0xff, *len
);
2613 for (i
= flash_first_partition_index
; i
<= flash_last_partition_index
; i
++) {
2614 for (j
= 0; image_parts
[j
].name
; j
++) {
2615 if (!strcmp(info
->partitions
[i
].name
, image_parts
[j
].name
)) {
2616 if (image_parts
[j
].size
> info
->partitions
[i
].size
)
2617 error(1, 0, "%s partition too big (more than %u bytes)", info
->partitions
[i
].name
, (unsigned)info
->partitions
[i
].size
);
2618 memcpy(image
+ info
->partitions
[i
].base
- flash_first_partition
->base
, image_parts
[j
].data
, image_parts
[j
].size
);
2622 assert(image_parts
[j
].name
);
2629 /** Generates an image according to a given layout and writes it to a file */
2630 static void build_image(const char *output
,
2631 const char *kernel_image
,
2632 const char *rootfs_image
,
2636 struct device_info
*info
) {
2640 struct image_partition_entry parts
[7] = {};
2642 struct flash_partition_entry
*firmware_partition
= NULL
;
2643 struct flash_partition_entry
*os_image_partition
= NULL
;
2644 struct flash_partition_entry
*file_system_partition
= NULL
;
2645 size_t firmware_partition_index
= 0;
2647 for (i
= 0; info
->partitions
[i
].name
; i
++) {
2648 if (!strcmp(info
->partitions
[i
].name
, "firmware"))
2650 firmware_partition
= &info
->partitions
[i
];
2651 firmware_partition_index
= i
;
2655 if (firmware_partition
)
2657 os_image_partition
= &info
->partitions
[firmware_partition_index
];
2658 file_system_partition
= &info
->partitions
[firmware_partition_index
+ 1];
2661 if (stat(kernel_image
, &kernel
) < 0)
2662 error(1, errno
, "unable to stat file `%s'", kernel_image
);
2664 if (kernel
.st_size
> firmware_partition
->size
)
2665 error(1, 0, "kernel overflowed firmware partition\n");
2667 for (i
= MAX_PARTITIONS
-1; i
>= firmware_partition_index
+ 1; i
--)
2668 info
->partitions
[i
+1] = info
->partitions
[i
];
2670 file_system_partition
->name
= "file-system";
2671 file_system_partition
->base
= firmware_partition
->base
+ kernel
.st_size
;
2673 /* Align partition start to erase blocks for factory images only */
2675 file_system_partition
->base
= ALIGN(firmware_partition
->base
+ kernel
.st_size
, 0x10000);
2677 file_system_partition
->size
= firmware_partition
->size
- file_system_partition
->base
;
2679 os_image_partition
->name
= "os-image";
2680 os_image_partition
->size
= kernel
.st_size
;
2683 parts
[0] = make_partition_table(info
->partitions
);
2685 parts
[1] = make_soft_version_from_string(info
->soft_ver
);
2687 parts
[1] = make_soft_version(info
, rev
);
2689 parts
[2] = make_support_list(info
);
2690 parts
[3] = read_file("os-image", kernel_image
, false, NULL
);
2691 parts
[4] = read_file("file-system", rootfs_image
, add_jffs2_eof
, file_system_partition
);
2693 /* Some devices need the extra-para partition to accept the firmware */
2694 if (strcasecmp(info
->id
, "ARCHER-C2-V3") == 0 ||
2695 strcasecmp(info
->id
, "ARCHER-C25-V1") == 0 ||
2696 strcasecmp(info
->id
, "ARCHER-C59-V2") == 0 ||
2697 strcasecmp(info
->id
, "ARCHER-C60-V2") == 0 ||
2698 strcasecmp(info
->id
, "ARCHER-C60-V3") == 0 ||
2699 strcasecmp(info
->id
, "TLWR1043NV5") == 0) {
2700 const char mdat
[11] = {0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00};
2701 parts
[5] = put_data("extra-para", mdat
, 11);
2702 } else if (strcasecmp(info
->id
, "ARCHER-A7-V5") == 0 || strcasecmp(info
->id
, "ARCHER-C7-V4") == 0 || strcasecmp(info
->id
, "ARCHER-C7-V5") == 0) {
2703 const char mdat
[11] = {0x01, 0x00, 0x00, 0x02, 0x00, 0x00, 0xca, 0x00, 0x01, 0x00, 0x00};
2704 parts
[5] = put_data("extra-para", mdat
, 11);
2705 } else if (strcasecmp(info
->id
, "ARCHER-C6-V2") == 0) {
2706 const char mdat
[11] = {0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00};
2707 parts
[5] = put_data("extra-para", mdat
, 11);
2708 } else if (strcasecmp(info
->id
, "ARCHER-C6-V2-US") == 0) {
2709 const char mdat
[11] = {0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x00};
2710 parts
[5] = put_data("extra-para", mdat
, 11);
2711 } else if (strcasecmp(info
->id
, "EAP245-V3") == 0) {
2712 const char mdat
[10] = {0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01};
2713 parts
[5] = put_data("extra-para", mdat
, 10);
2719 image
= generate_sysupgrade_image(info
, parts
, &len
);
2721 image
= generate_factory_image(info
, parts
, &len
);
2723 FILE *file
= fopen(output
, "wb");
2725 error(1, errno
, "unable to open output file");
2727 if (fwrite(image
, len
, 1, file
) != 1)
2728 error(1, 0, "unable to write output file");
2734 for (i
= 0; parts
[i
].name
; i
++)
2735 free_image_partition(parts
[i
]);
2739 static void usage(const char *argv0
) {
2741 "Usage: %s [OPTIONS...]\n"
2744 " -h show this help\n"
2746 "Create a new image:\n"
2747 " -B <board> create image for the board specified with <board>\n"
2748 " -k <file> read kernel image from the file <file>\n"
2749 " -r <file> read rootfs image from the file <file>\n"
2750 " -o <file> write output to the file <file>\n"
2751 " -V <rev> sets the revision number to <rev>\n"
2752 " -j add jffs2 end-of-filesystem markers\n"
2753 " -S create sysupgrade instead of factory image\n"
2754 "Extract an old image:\n"
2755 " -x <file> extract all oem firmware partition\n"
2756 " -d <dir> destination to extract the firmware partition\n"
2757 " -z <file> convert an oem firmware into a sysupgade file. Use -o for output file\n",
2763 static struct device_info
*find_board(const char *id
)
2765 struct device_info
*board
= NULL
;
2767 for (board
= boards
; board
->id
!= NULL
; board
++)
2768 if (strcasecmp(id
, board
->id
) == 0)
2774 static int add_flash_partition(
2775 struct flash_partition_entry
*part_list
,
2782 /* check if the list has a free entry */
2783 for (ptr
= 0; ptr
< max_entries
; ptr
++, part_list
++) {
2784 if (part_list
->name
== NULL
&&
2785 part_list
->base
== 0 &&
2786 part_list
->size
== 0)
2790 if (ptr
== max_entries
) {
2791 error(1, 0, "No free flash part entry available.");
2794 part_list
->name
= calloc(1, strlen(name
) + 1);
2795 if (!part_list
->name
) {
2796 error(1, 0, "Unable to allocate memory");
2799 memcpy((char *)part_list
->name
, name
, strlen(name
));
2800 part_list
->base
= base
;
2801 part_list
->size
= size
;
2806 /** read the partition table into struct flash_partition_entry */
2807 static int read_partition_table(
2808 FILE *file
, long offset
,
2809 struct flash_partition_entry
*entries
, size_t max_entries
,
2814 const char *parthdr
= NULL
;
2815 const char *fwuphdr
= "fwup-ptn";
2816 const char *flashhdr
= "partition";
2818 /* TODO: search for the partition table */
2828 error(1, 0, "Invalid partition table");
2831 if (fseek(file
, offset
, SEEK_SET
) < 0)
2832 error(1, errno
, "Can not seek in the firmware");
2834 if (fread(buf
, 2048, 1, file
) != 1)
2835 error(1, errno
, "Can not read fwup-ptn from the firmware");
2839 /* look for the partition header */
2840 if (memcmp(buf
, parthdr
, strlen(parthdr
)) != 0) {
2841 fprintf(stderr
, "DEBUG: can not find fwuphdr\n");
2846 end
= buf
+ sizeof(buf
);
2847 while ((ptr
+ strlen(parthdr
)) < end
&&
2848 memcmp(ptr
, parthdr
, strlen(parthdr
)) == 0) {
2852 char name
[32] = { 0 };
2854 unsigned long base
= 0;
2855 unsigned long size
= 0;
2857 end_part
= memchr(ptr
, '\n', (end
- ptr
));
2858 if (end_part
== NULL
) {
2859 /* in theory this should never happen, because a partition always ends with 0x09, 0x0D, 0x0A */
2863 for (int i
= 0; i
<= 4; i
++) {
2864 if (end_part
<= ptr
)
2867 end_element
= memchr(ptr
, 0x20, (end_part
- ptr
));
2868 if (end_element
== NULL
) {
2869 error(1, errno
, "Ignoring the rest of the partition entries.");
2874 /* partition header */
2876 ptr
= end_element
+ 1;
2880 name_len
= (end_element
- ptr
) > 31 ? 31 : (end_element
- ptr
);
2881 strncpy(name
, ptr
, name_len
);
2882 name
[name_len
] = '\0';
2883 ptr
= end_element
+ 1;
2888 ptr
= end_element
+ 1;
2893 base
= strtoul(ptr
, NULL
, 16);
2894 ptr
= end_element
+ 1;
2899 ptr
= end_element
+ 1;
2900 /* actual size. The last element doesn't have a sepeartor */
2901 size
= strtoul(ptr
, NULL
, 16);
2902 /* the part ends with 0x09, 0x0d, 0x0a */
2904 add_flash_partition(entries
, max_entries
, name
, base
, size
);
2913 static void write_partition(
2915 size_t firmware_offset
,
2916 struct flash_partition_entry
*entry
,
2922 fseek(input_file
, entry
->base
+ firmware_offset
, SEEK_SET
);
2924 for (offset
= 0; sizeof(buf
) + offset
<= entry
->size
; offset
+= sizeof(buf
)) {
2925 if (fread(buf
, sizeof(buf
), 1, input_file
) != 1)
2926 error(1, errno
, "Can not read partition from input_file");
2928 if (fwrite(buf
, sizeof(buf
), 1, output_file
) != 1)
2929 error(1, errno
, "Can not write partition to output_file");
2931 /* write last chunk smaller than buffer */
2932 if (offset
< entry
->size
) {
2933 offset
= entry
->size
- offset
;
2934 if (fread(buf
, offset
, 1, input_file
) != 1)
2935 error(1, errno
, "Can not read partition from input_file");
2936 if (fwrite(buf
, offset
, 1, output_file
) != 1)
2937 error(1, errno
, "Can not write partition to output_file");
2941 static int extract_firmware_partition(FILE *input_file
, size_t firmware_offset
, struct flash_partition_entry
*entry
, const char *output_directory
)
2944 char output
[PATH_MAX
];
2946 snprintf(output
, PATH_MAX
, "%s/%s", output_directory
, entry
->name
);
2947 output_file
= fopen(output
, "wb+");
2948 if (output_file
== NULL
) {
2949 error(1, errno
, "Can not open output file %s", output
);
2952 write_partition(input_file
, firmware_offset
, entry
, output_file
);
2954 fclose(output_file
);
2959 /** extract all partitions from the firmware file */
2960 static int extract_firmware(const char *input
, const char *output_directory
)
2962 struct flash_partition_entry entries
[16] = { 0 };
2963 size_t max_entries
= 16;
2964 size_t firmware_offset
= 0x1014;
2967 struct stat statbuf
;
2969 /* check input file */
2970 if (stat(input
, &statbuf
)) {
2971 error(1, errno
, "Can not read input firmware %s", input
);
2974 /* check if output directory exists */
2975 if (stat(output_directory
, &statbuf
)) {
2976 error(1, errno
, "Failed to stat output directory %s", output_directory
);
2979 if ((statbuf
.st_mode
& S_IFMT
) != S_IFDIR
) {
2980 error(1, errno
, "Given output directory is not a directory %s", output_directory
);
2983 input_file
= fopen(input
, "rb");
2985 if (read_partition_table(input_file
, firmware_offset
, entries
, 16, 0) != 0) {
2986 error(1, 0, "Error can not read the partition table (fwup-ptn)");
2989 for (size_t i
= 0; i
< max_entries
; i
++) {
2990 if (entries
[i
].name
== NULL
&&
2991 entries
[i
].base
== 0 &&
2992 entries
[i
].size
== 0)
2995 extract_firmware_partition(input_file
, firmware_offset
, &entries
[i
], output_directory
);
3001 static struct flash_partition_entry
*find_partition(
3002 struct flash_partition_entry
*entries
, size_t max_entries
,
3003 const char *name
, const char *error_msg
)
3005 for (size_t i
= 0; i
< max_entries
; i
++, entries
++) {
3006 if (strcmp(entries
->name
, name
) == 0)
3010 error(1, 0, "%s", error_msg
);
3014 static void write_ff(FILE *output_file
, size_t size
)
3019 memset(buf
, 0xff, sizeof(buf
));
3021 for (offset
= 0; offset
+ sizeof(buf
) < size
; offset
+= sizeof(buf
)) {
3022 if (fwrite(buf
, sizeof(buf
), 1, output_file
) != 1)
3023 error(1, errno
, "Can not write 0xff to output_file");
3026 /* write last chunk smaller than buffer */
3027 if (offset
< size
) {
3028 offset
= size
- offset
;
3029 if (fwrite(buf
, offset
, 1, output_file
) != 1)
3030 error(1, errno
, "Can not write partition to output_file");
3034 static void convert_firmware(const char *input
, const char *output
)
3036 struct flash_partition_entry fwup
[MAX_PARTITIONS
] = { 0 };
3037 struct flash_partition_entry flash
[MAX_PARTITIONS
] = { 0 };
3038 struct flash_partition_entry
*fwup_os_image
= NULL
, *fwup_file_system
= NULL
;
3039 struct flash_partition_entry
*flash_os_image
= NULL
, *flash_file_system
= NULL
;
3040 struct flash_partition_entry
*fwup_partition_table
= NULL
;
3041 size_t firmware_offset
= 0x1014;
3042 FILE *input_file
, *output_file
;
3044 struct stat statbuf
;
3046 /* check input file */
3047 if (stat(input
, &statbuf
)) {
3048 error(1, errno
, "Can not read input firmware %s", input
);
3051 input_file
= fopen(input
, "rb");
3053 error(1, 0, "Can not open input firmware %s", input
);
3055 output_file
= fopen(output
, "wb");
3057 error(1, 0, "Can not open output firmware %s", output
);
3059 if (read_partition_table(input_file
, firmware_offset
, fwup
, MAX_PARTITIONS
, 0) != 0) {
3060 error(1, 0, "Error can not read the partition table (fwup-ptn)");
3063 fwup_os_image
= find_partition(fwup
, MAX_PARTITIONS
,
3064 "os-image", "Error can not find os-image partition (fwup)");
3065 fwup_file_system
= find_partition(fwup
, MAX_PARTITIONS
,
3066 "file-system", "Error can not find file-system partition (fwup)");
3067 fwup_partition_table
= find_partition(fwup
, MAX_PARTITIONS
,
3068 "partition-table", "Error can not find partition-table partition");
3070 /* the flash partition table has a 0x00000004 magic haeder */
3071 if (read_partition_table(input_file
, firmware_offset
+ fwup_partition_table
->base
+ 4, flash
, MAX_PARTITIONS
, 1) != 0)
3072 error(1, 0, "Error can not read the partition table (flash)");
3074 flash_os_image
= find_partition(flash
, MAX_PARTITIONS
,
3075 "os-image", "Error can not find os-image partition (flash)");
3076 flash_file_system
= find_partition(flash
, MAX_PARTITIONS
,
3077 "file-system", "Error can not find file-system partition (flash)");
3079 /* write os_image to 0x0 */
3080 write_partition(input_file
, firmware_offset
, fwup_os_image
, output_file
);
3081 write_ff(output_file
, flash_os_image
->size
- fwup_os_image
->size
);
3083 /* write file-system behind os_image */
3084 fseek(output_file
, flash_file_system
->base
- flash_os_image
->base
, SEEK_SET
);
3085 write_partition(input_file
, firmware_offset
, fwup_file_system
, output_file
);
3086 write_ff(output_file
, flash_file_system
->size
- fwup_file_system
->size
);
3088 fclose(output_file
);
3092 int main(int argc
, char *argv
[]) {
3093 const char *board
= NULL
, *kernel_image
= NULL
, *rootfs_image
= NULL
, *output
= NULL
;
3094 const char *extract_image
= NULL
, *output_directory
= NULL
, *convert_image
= NULL
;
3095 bool add_jffs2_eof
= false, sysupgrade
= false;
3097 struct device_info
*info
;
3098 set_source_date_epoch();
3103 c
= getopt(argc
, argv
, "B:k:r:o:V:jSh:x:d:z:");
3113 kernel_image
= optarg
;
3117 rootfs_image
= optarg
;
3125 sscanf(optarg
, "r%u", &rev
);
3129 add_jffs2_eof
= true;
3141 output_directory
= optarg
;
3145 extract_image
= optarg
;
3149 convert_image
= optarg
;
3158 if (extract_image
|| output_directory
) {
3160 error(1, 0, "No factory/oem image given via -x <file>. Output directory is only valid with -x");
3161 if (!output_directory
)
3162 error(1, 0, "Can not extract an image without output directory. Use -d <dir>");
3163 extract_firmware(extract_image
, output_directory
);
3164 } else if (convert_image
) {
3166 error(1, 0, "Can not convert a factory/oem image into sysupgrade image without output file. Use -o <file>");
3167 convert_firmware(convert_image
, output
);
3170 error(1, 0, "no board has been specified");
3172 error(1, 0, "no kernel image has been specified");
3174 error(1, 0, "no rootfs image has been specified");
3176 error(1, 0, "no output filename has been specified");
3178 info
= find_board(board
);
3181 error(1, 0, "unsupported board %s", board
);
3183 build_image(output
, kernel_image
, rootfs_image
, rev
, add_jffs2_eof
, sysupgrade
, info
);