2 Copyright (c) 2014, Matthias Schiffer <mschiffer@universe-factory.net>
5 Redistribution and use in source and binary forms, with or without
6 modification, are permitted provided that the following conditions are met:
8 1. Redistributions of source code must retain the above copyright notice,
9 this list of conditions and the following disclaimer.
10 2. Redistributions in binary form must reproduce the above copyright notice,
11 this list of conditions and the following disclaimer in the documentation
12 and/or other materials provided with the distribution.
14 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
15 AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16 IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
17 DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
18 FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19 DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
20 SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
21 CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
22 OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
23 OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
30 Image generation tool for the TP-LINK SafeLoader as seen on
31 TP-LINK Pharos devices (CPE210/220/510/520)
45 #include <arpa/inet.h>
47 #include <sys/types.h>
54 #define ALIGN(x,a) ({ typeof(a) __a = (a); (((x) + __a - 1) & ~(__a - 1)); })
57 #define MAX_PARTITIONS 32
59 /** An image partition table entry */
60 struct image_partition_entry
{
66 /** A flash partition table entry */
67 struct flash_partition_entry
{
73 /** Firmware layout description */
77 const char *support_list
;
80 struct flash_partition_entry partitions
[MAX_PARTITIONS
+1];
81 const char *first_sysupgrade_partition
;
82 const char *last_sysupgrade_partition
;
85 /** The content of the soft-version structure */
86 struct __attribute__((__packed__
)) soft_version
{
90 uint8_t version_major
;
91 uint8_t version_minor
;
92 uint8_t version_patch
;
102 static const uint8_t jffs2_eof_mark
[4] = {0xde, 0xad, 0xc0, 0xde};
106 Salt for the MD5 hash
108 Fortunately, TP-LINK seems to use the same salt for most devices which use
109 the new image format.
111 static const uint8_t md5_salt
[16] = {
112 0x7a, 0x2b, 0x15, 0xed,
113 0x9b, 0x98, 0x59, 0x6d,
114 0xe5, 0x04, 0xab, 0x44,
115 0xac, 0x2a, 0x9f, 0x4e,
119 /** Firmware layout table */
120 static struct device_info boards
[] = {
121 /** Firmware layout for the CPE210/220 V1 */
124 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
127 "CPE210(TP-LINK|UN|N300-2):1.0\r\n"
128 "CPE210(TP-LINK|UN|N300-2):1.1\r\n"
129 "CPE210(TP-LINK|US|N300-2):1.1\r\n"
130 "CPE210(TP-LINK|EU|N300-2):1.1\r\n"
131 "CPE220(TP-LINK|UN|N300-2):1.1\r\n"
132 "CPE220(TP-LINK|US|N300-2):1.1\r\n"
133 "CPE220(TP-LINK|EU|N300-2):1.1\r\n",
134 .support_trail
= '\xff',
138 {"fs-uboot", 0x00000, 0x20000},
139 {"partition-table", 0x20000, 0x02000},
140 {"default-mac", 0x30000, 0x00020},
141 {"product-info", 0x31100, 0x00100},
142 {"signature", 0x32000, 0x00400},
143 {"os-image", 0x40000, 0x200000},
144 {"file-system", 0x240000, 0x570000},
145 {"soft-version", 0x7b0000, 0x00100},
146 {"support-list", 0x7b1000, 0x00400},
147 {"user-config", 0x7c0000, 0x10000},
148 {"default-config", 0x7d0000, 0x10000},
149 {"log", 0x7e0000, 0x10000},
150 {"radio", 0x7f0000, 0x10000},
154 .first_sysupgrade_partition
= "os-image",
155 .last_sysupgrade_partition
= "support-list",
158 /** Firmware layout for the CPE210 V2 */
161 .vendor
= "CPE210(TP-LINK|UN|N300-2|00000000):2.0\r\n",
164 "CPE210(TP-LINK|EU|N300-2|00000000):2.0\r\n"
165 "CPE210(TP-LINK|EU|N300-2|45550000):2.0\r\n"
166 "CPE210(TP-LINK|EU|N300-2|55530000):2.0\r\n"
167 "CPE210(TP-LINK|UN|N300-2|00000000):2.0\r\n"
168 "CPE210(TP-LINK|UN|N300-2|45550000):2.0\r\n"
169 "CPE210(TP-LINK|UN|N300-2|55530000):2.0\r\n"
170 "CPE210(TP-LINK|US|N300-2|55530000):2.0\r\n"
171 "CPE210(TP-LINK|UN|N300-2):2.0\r\n"
172 "CPE210(TP-LINK|EU|N300-2):2.0\r\n"
173 "CPE210(TP-LINK|US|N300-2):2.0\r\n",
174 .support_trail
= '\xff',
178 {"fs-uboot", 0x00000, 0x20000},
179 {"partition-table", 0x20000, 0x02000},
180 {"default-mac", 0x30000, 0x00020},
181 {"product-info", 0x31100, 0x00100},
182 {"device-info", 0x31400, 0x00400},
183 {"signature", 0x32000, 0x00400},
184 {"device-id", 0x33000, 0x00100},
185 {"firmware", 0x40000, 0x770000},
186 {"soft-version", 0x7b0000, 0x00100},
187 {"support-list", 0x7b1000, 0x01000},
188 {"user-config", 0x7c0000, 0x10000},
189 {"default-config", 0x7d0000, 0x10000},
190 {"log", 0x7e0000, 0x10000},
191 {"radio", 0x7f0000, 0x10000},
195 .first_sysupgrade_partition
= "os-image",
196 .last_sysupgrade_partition
= "support-list",
199 /** Firmware layout for the CPE210 V3 */
202 .vendor
= "CPE210(TP-LINK|UN|N300-2|00000000):3.0\r\n",
205 "CPE210(TP-LINK|EU|N300-2|45550000):3.0\r\n"
206 "CPE210(TP-LINK|UN|N300-2|00000000):3.0\r\n"
207 "CPE210(TP-LINK|UN|N300-2):3.0\r\n"
208 "CPE210(TP-LINK|EU|N300-2):3.0\r\n",
209 .support_trail
= '\xff',
213 {"fs-uboot", 0x00000, 0x20000},
214 {"partition-table", 0x20000, 0x01000},
215 {"default-mac", 0x30000, 0x00020},
216 {"product-info", 0x31100, 0x00100},
217 {"device-info", 0x31400, 0x00400},
218 {"signature", 0x32000, 0x00400},
219 {"device-id", 0x33000, 0x00100},
220 {"firmware", 0x40000, 0x770000},
221 {"soft-version", 0x7b0000, 0x00100},
222 {"support-list", 0x7b1000, 0x01000},
223 {"user-config", 0x7c0000, 0x10000},
224 {"default-config", 0x7d0000, 0x10000},
225 {"log", 0x7e0000, 0x10000},
226 {"radio", 0x7f0000, 0x10000},
230 .first_sysupgrade_partition
= "os-image",
231 .last_sysupgrade_partition
= "support-list",
234 /** Firmware layout for the CPE220 V2 */
237 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
240 "CPE220(TP-LINK|EU|N300-2|00000000):2.0\r\n"
241 "CPE220(TP-LINK|EU|N300-2|45550000):2.0\r\n"
242 "CPE220(TP-LINK|EU|N300-2|55530000):2.0\r\n"
243 "CPE220(TP-LINK|UN|N300-2|00000000):2.0\r\n"
244 "CPE220(TP-LINK|UN|N300-2|45550000):2.0\r\n"
245 "CPE220(TP-LINK|UN|N300-2|55530000):2.0\r\n"
246 "CPE220(TP-LINK|US|N300-2|55530000):2.0\r\n"
247 "CPE220(TP-LINK|UN|N300-2):2.0\r\n"
248 "CPE220(TP-LINK|EU|N300-2):2.0\r\n"
249 "CPE220(TP-LINK|US|N300-2):2.0\r\n",
250 .support_trail
= '\xff',
254 {"fs-uboot", 0x00000, 0x20000},
255 {"partition-table", 0x20000, 0x02000},
256 {"default-mac", 0x30000, 0x00020},
257 {"product-info", 0x31100, 0x00100},
258 {"signature", 0x32000, 0x00400},
259 {"os-image", 0x40000, 0x200000},
260 {"file-system", 0x240000, 0x570000},
261 {"soft-version", 0x7b0000, 0x00100},
262 {"support-list", 0x7b1000, 0x00400},
263 {"user-config", 0x7c0000, 0x10000},
264 {"default-config", 0x7d0000, 0x10000},
265 {"log", 0x7e0000, 0x10000},
266 {"radio", 0x7f0000, 0x10000},
270 .first_sysupgrade_partition
= "os-image",
271 .last_sysupgrade_partition
= "support-list",
274 /** Firmware layout for the CPE220 V3 */
277 .vendor
= "CPE220(TP-LINK|UN|N300-2|00000000):3.0\r\n",
280 "CPE220(TP-LINK|EU|N300-2|00000000):3.0\r\n"
281 "CPE220(TP-LINK|EU|N300-2|45550000):3.0\r\n"
282 "CPE220(TP-LINK|EU|N300-2|55530000):3.0\r\n"
283 "CPE220(TP-LINK|UN|N300-2|00000000):3.0\r\n"
284 "CPE220(TP-LINK|UN|N300-2|45550000):3.0\r\n"
285 "CPE220(TP-LINK|UN|N300-2|55530000):3.0\r\n"
286 "CPE220(TP-LINK|US|N300-2|55530000):3.0\r\n"
287 "CPE220(TP-LINK|UN|N300-2):3.0\r\n"
288 "CPE220(TP-LINK|EU|N300-2):3.0\r\n"
289 "CPE220(TP-LINK|US|N300-2):3.0\r\n",
290 .support_trail
= '\xff',
294 {"fs-uboot", 0x00000, 0x20000},
295 {"partition-table", 0x20000, 0x02000},
296 {"default-mac", 0x30000, 0x00020},
297 {"product-info", 0x31100, 0x00100},
298 {"device-info", 0x31400, 0x00400},
299 {"signature", 0x32000, 0x00400},
300 {"device-id", 0x33000, 0x00100},
301 {"firmware", 0x40000, 0x770000},
302 {"soft-version", 0x7b0000, 0x00100},
303 {"support-list", 0x7b1000, 0x01000},
304 {"user-config", 0x7c0000, 0x10000},
305 {"default-config", 0x7d0000, 0x10000},
306 {"log", 0x7e0000, 0x10000},
307 {"radio", 0x7f0000, 0x10000},
311 .first_sysupgrade_partition
= "os-image",
312 .last_sysupgrade_partition
= "support-list",
315 /** Firmware layout for the CPE510/520 V1 */
318 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
321 "CPE510(TP-LINK|UN|N300-5):1.0\r\n"
322 "CPE510(TP-LINK|UN|N300-5):1.1\r\n"
323 "CPE510(TP-LINK|UN|N300-5):1.1\r\n"
324 "CPE510(TP-LINK|US|N300-5):1.1\r\n"
325 "CPE510(TP-LINK|EU|N300-5):1.1\r\n"
326 "CPE520(TP-LINK|UN|N300-5):1.1\r\n"
327 "CPE520(TP-LINK|US|N300-5):1.1\r\n"
328 "CPE520(TP-LINK|EU|N300-5):1.1\r\n",
329 .support_trail
= '\xff',
333 {"fs-uboot", 0x00000, 0x20000},
334 {"partition-table", 0x20000, 0x02000},
335 {"default-mac", 0x30000, 0x00020},
336 {"product-info", 0x31100, 0x00100},
337 {"signature", 0x32000, 0x00400},
338 {"os-image", 0x40000, 0x200000},
339 {"file-system", 0x240000, 0x570000},
340 {"soft-version", 0x7b0000, 0x00100},
341 {"support-list", 0x7b1000, 0x00400},
342 {"user-config", 0x7c0000, 0x10000},
343 {"default-config", 0x7d0000, 0x10000},
344 {"log", 0x7e0000, 0x10000},
345 {"radio", 0x7f0000, 0x10000},
349 .first_sysupgrade_partition
= "os-image",
350 .last_sysupgrade_partition
= "support-list",
353 /** Firmware layout for the CPE510 V2 */
356 .vendor
= "CPE510(TP-LINK|UN|N300-5):2.0\r\n",
359 "CPE510(TP-LINK|EU|N300-5|00000000):2.0\r\n"
360 "CPE510(TP-LINK|EU|N300-5|45550000):2.0\r\n"
361 "CPE510(TP-LINK|EU|N300-5|55530000):2.0\r\n"
362 "CPE510(TP-LINK|UN|N300-5|00000000):2.0\r\n"
363 "CPE510(TP-LINK|UN|N300-5|45550000):2.0\r\n"
364 "CPE510(TP-LINK|UN|N300-5|55530000):2.0\r\n"
365 "CPE510(TP-LINK|US|N300-5|00000000):2.0\r\n"
366 "CPE510(TP-LINK|US|N300-5|45550000):2.0\r\n"
367 "CPE510(TP-LINK|US|N300-5|55530000):2.0\r\n"
368 "CPE510(TP-LINK|UN|N300-5):2.0\r\n"
369 "CPE510(TP-LINK|EU|N300-5):2.0\r\n"
370 "CPE510(TP-LINK|US|N300-5):2.0\r\n",
371 .support_trail
= '\xff',
375 {"fs-uboot", 0x00000, 0x20000},
376 {"partition-table", 0x20000, 0x02000},
377 {"default-mac", 0x30000, 0x00020},
378 {"product-info", 0x31100, 0x00100},
379 {"signature", 0x32000, 0x00400},
380 {"os-image", 0x40000, 0x200000},
381 {"file-system", 0x240000, 0x570000},
382 {"soft-version", 0x7b0000, 0x00100},
383 {"support-list", 0x7b1000, 0x00400},
384 {"user-config", 0x7c0000, 0x10000},
385 {"default-config", 0x7d0000, 0x10000},
386 {"log", 0x7e0000, 0x10000},
387 {"radio", 0x7f0000, 0x10000},
391 .first_sysupgrade_partition
= "os-image",
392 .last_sysupgrade_partition
= "support-list",
395 /** Firmware layout for the CPE510 V3 */
398 .vendor
= "CPE510(TP-LINK|UN|N300-5):3.0\r\n",
401 "CPE510(TP-LINK|EU|N300-5|00000000):3.0\r\n"
402 "CPE510(TP-LINK|EU|N300-5|45550000):3.0\r\n"
403 "CPE510(TP-LINK|EU|N300-5|55530000):3.0\r\n"
404 "CPE510(TP-LINK|UN|N300-5|00000000):3.0\r\n"
405 "CPE510(TP-LINK|UN|N300-5|45550000):3.0\r\n"
406 "CPE510(TP-LINK|UN|N300-5|55530000):3.0\r\n"
407 "CPE510(TP-LINK|US|N300-5|00000000):3.0\r\n"
408 "CPE510(TP-LINK|US|N300-5|45550000):3.0\r\n"
409 "CPE510(TP-LINK|US|N300-5|55530000):3.0\r\n"
410 "CPE510(TP-LINK|UN|N300-5):3.0\r\n"
411 "CPE510(TP-LINK|EU|N300-5):3.0\r\n"
412 "CPE510(TP-LINK|US|N300-5):3.0\r\n",
413 .support_trail
= '\xff',
417 {"fs-uboot", 0x00000, 0x20000},
418 {"partition-table", 0x20000, 0x02000},
419 {"default-mac", 0x30000, 0x00020},
420 {"product-info", 0x31100, 0x00100},
421 {"signature", 0x32000, 0x00400},
422 {"os-image", 0x40000, 0x200000},
423 {"file-system", 0x240000, 0x570000},
424 {"soft-version", 0x7b0000, 0x00100},
425 {"support-list", 0x7b1000, 0x00400},
426 {"user-config", 0x7c0000, 0x10000},
427 {"default-config", 0x7d0000, 0x10000},
428 {"log", 0x7e0000, 0x10000},
429 {"radio", 0x7f0000, 0x10000},
433 .first_sysupgrade_partition
= "os-image",
434 .last_sysupgrade_partition
= "support-list",
437 /** Firmware layout for the CPE610V1 */
440 .vendor
= "CPE610(TP-LINK|UN|N300-5|00000000):1.0\r\n",
443 "CPE610(TP-LINK|EU|N300-5|00000000):1.0\r\n"
444 "CPE610(TP-LINK|EU|N300-5|45550000):1.0\r\n"
445 "CPE610(TP-LINK|EU|N300-5|55530000):1.0\r\n"
446 "CPE610(TP-LINK|UN|N300-5|00000000):1.0\r\n"
447 "CPE610(TP-LINK|UN|N300-5|45550000):1.0\r\n"
448 "CPE610(TP-LINK|UN|N300-5|55530000):1.0\r\n"
449 "CPE610(TP-LINK|US|N300-5|55530000):1.0\r\n"
450 "CPE610(TP-LINK|UN|N300-5):1.0\r\n"
451 "CPE610(TP-LINK|EU|N300-5):1.0\r\n"
452 "CPE610(TP-LINK|US|N300-5):1.0\r\n",
453 .support_trail
= '\xff',
457 {"fs-uboot", 0x00000, 0x20000},
458 {"partition-table", 0x20000, 0x02000},
459 {"default-mac", 0x30000, 0x00020},
460 {"product-info", 0x31100, 0x00100},
461 {"signature", 0x32000, 0x00400},
462 {"os-image", 0x40000, 0x200000},
463 {"file-system", 0x240000, 0x570000},
464 {"soft-version", 0x7b0000, 0x00100},
465 {"support-list", 0x7b1000, 0x00400},
466 {"user-config", 0x7c0000, 0x10000},
467 {"default-config", 0x7d0000, 0x10000},
468 {"log", 0x7e0000, 0x10000},
469 {"radio", 0x7f0000, 0x10000},
473 .first_sysupgrade_partition
= "os-image",
474 .last_sysupgrade_partition
= "support-list",
477 /** Firmware layout for the CPE610V2 */
480 .vendor
= "CPE610(TP-LINK|UN|N300-5|00000000):2.0\r\n",
483 "CPE610(TP-LINK|EU|N300-5|00000000):2.0\r\n"
484 "CPE610(TP-LINK|EU|N300-5|45550000):2.0\r\n"
485 "CPE610(TP-LINK|EU|N300-5|55530000):2.0\r\n"
486 "CPE610(TP-LINK|UN|N300-5|00000000):2.0\r\n"
487 "CPE610(TP-LINK|UN|N300-5|45550000):2.0\r\n"
488 "CPE610(TP-LINK|UN|N300-5|55530000):2.0\r\n"
489 "CPE610(TP-LINK|US|N300-5|55530000):2.0\r\n"
490 "CPE610(TP-LINK|UN|N300-5):2.0\r\n"
491 "CPE610(TP-LINK|EU|N300-5):2.0\r\n"
492 "CPE610(TP-LINK|US|N300-5):2.0\r\n",
493 .support_trail
= '\xff',
497 {"fs-uboot", 0x00000, 0x20000},
498 {"partition-table", 0x20000, 0x02000},
499 {"default-mac", 0x30000, 0x00020},
500 {"product-info", 0x31100, 0x00100},
501 {"signature", 0x32000, 0x00400},
502 {"os-image", 0x40000, 0x200000},
503 {"file-system", 0x240000, 0x570000},
504 {"soft-version", 0x7b0000, 0x00100},
505 {"support-list", 0x7b1000, 0x00400},
506 {"user-config", 0x7c0000, 0x10000},
507 {"default-config", 0x7d0000, 0x10000},
508 {"log", 0x7e0000, 0x10000},
509 {"radio", 0x7f0000, 0x10000},
513 .first_sysupgrade_partition
= "os-image",
514 .last_sysupgrade_partition
= "support-list",
519 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
522 "WBS210(TP-LINK|UN|N300-2):1.20\r\n"
523 "WBS210(TP-LINK|US|N300-2):1.20\r\n"
524 "WBS210(TP-LINK|EU|N300-2):1.20\r\n",
525 .support_trail
= '\xff',
529 {"fs-uboot", 0x00000, 0x20000},
530 {"partition-table", 0x20000, 0x02000},
531 {"default-mac", 0x30000, 0x00020},
532 {"product-info", 0x31100, 0x00100},
533 {"signature", 0x32000, 0x00400},
534 {"os-image", 0x40000, 0x200000},
535 {"file-system", 0x240000, 0x570000},
536 {"soft-version", 0x7b0000, 0x00100},
537 {"support-list", 0x7b1000, 0x00400},
538 {"user-config", 0x7c0000, 0x10000},
539 {"default-config", 0x7d0000, 0x10000},
540 {"log", 0x7e0000, 0x10000},
541 {"radio", 0x7f0000, 0x10000},
545 .first_sysupgrade_partition
= "os-image",
546 .last_sysupgrade_partition
= "support-list",
551 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
554 "WBS210(TP-LINK|UN|N300-2|00000000):2.0\r\n"
555 "WBS210(TP-LINK|US|N300-2|55530000):2.0\r\n"
556 "WBS210(TP-LINK|EU|N300-2|45550000):2.0\r\n",
557 .support_trail
= '\xff',
561 {"fs-uboot", 0x00000, 0x20000},
562 {"partition-table", 0x20000, 0x02000},
563 {"default-mac", 0x30000, 0x00020},
564 {"product-info", 0x31100, 0x00100},
565 {"signature", 0x32000, 0x00400},
566 {"os-image", 0x40000, 0x200000},
567 {"file-system", 0x240000, 0x570000},
568 {"soft-version", 0x7b0000, 0x00100},
569 {"support-list", 0x7b1000, 0x00400},
570 {"user-config", 0x7c0000, 0x10000},
571 {"default-config", 0x7d0000, 0x10000},
572 {"log", 0x7e0000, 0x10000},
573 {"radio", 0x7f0000, 0x10000},
577 .first_sysupgrade_partition
= "os-image",
578 .last_sysupgrade_partition
= "support-list",
583 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
586 "WBS510(TP-LINK|UN|N300-5):1.20\r\n"
587 "WBS510(TP-LINK|US|N300-5):1.20\r\n"
588 "WBS510(TP-LINK|EU|N300-5):1.20\r\n"
589 "WBS510(TP-LINK|CA|N300-5):1.20\r\n",
590 .support_trail
= '\xff',
594 {"fs-uboot", 0x00000, 0x20000},
595 {"partition-table", 0x20000, 0x02000},
596 {"default-mac", 0x30000, 0x00020},
597 {"product-info", 0x31100, 0x00100},
598 {"signature", 0x32000, 0x00400},
599 {"os-image", 0x40000, 0x200000},
600 {"file-system", 0x240000, 0x570000},
601 {"soft-version", 0x7b0000, 0x00100},
602 {"support-list", 0x7b1000, 0x00400},
603 {"user-config", 0x7c0000, 0x10000},
604 {"default-config", 0x7d0000, 0x10000},
605 {"log", 0x7e0000, 0x10000},
606 {"radio", 0x7f0000, 0x10000},
610 .first_sysupgrade_partition
= "os-image",
611 .last_sysupgrade_partition
= "support-list",
616 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
619 "WBS510(TP-LINK|UN|N300-5|00000000):2.0\r\n"
620 "WBS510(TP-LINK|US|N300-5|55530000):2.0\r\n"
621 "WBS510(TP-LINK|EU|N300-5|45550000):2.0\r\n"
622 "WBS510(TP-LINK|CA|N300-5|43410000):2.0\r\n",
623 .support_trail
= '\xff',
627 {"fs-uboot", 0x00000, 0x20000},
628 {"partition-table", 0x20000, 0x02000},
629 {"default-mac", 0x30000, 0x00020},
630 {"product-info", 0x31100, 0x00100},
631 {"signature", 0x32000, 0x00400},
632 {"os-image", 0x40000, 0x200000},
633 {"file-system", 0x240000, 0x570000},
634 {"soft-version", 0x7b0000, 0x00100},
635 {"support-list", 0x7b1000, 0x00400},
636 {"user-config", 0x7c0000, 0x10000},
637 {"default-config", 0x7d0000, 0x10000},
638 {"log", 0x7e0000, 0x10000},
639 {"radio", 0x7f0000, 0x10000},
643 .first_sysupgrade_partition
= "os-image",
644 .last_sysupgrade_partition
= "support-list",
647 /** Firmware layout for the C2600 */
653 "{product_name:Archer C2600,product_ver:1.0.0,special_id:00000000}\r\n",
654 .support_trail
= '\x00',
658 We use a bigger os-image partition than the stock images (and thus
659 smaller file-system), as our kernel doesn't fit in the stock firmware's
660 2 MB os-image since kernel 4.14.
663 {"SBL1", 0x00000, 0x20000},
664 {"MIBIB", 0x20000, 0x20000},
665 {"SBL2", 0x40000, 0x20000},
666 {"SBL3", 0x60000, 0x30000},
667 {"DDRCONFIG", 0x90000, 0x10000},
668 {"SSD", 0xa0000, 0x10000},
669 {"TZ", 0xb0000, 0x30000},
670 {"RPM", 0xe0000, 0x20000},
671 {"fs-uboot", 0x100000, 0x70000},
672 {"uboot-env", 0x170000, 0x40000},
673 {"radio", 0x1b0000, 0x40000},
674 {"os-image", 0x1f0000, 0x400000}, /* Stock: base 0x1f0000 size 0x200000 */
675 {"file-system", 0x5f0000, 0x1900000}, /* Stock: base 0x3f0000 size 0x1b00000 */
676 {"default-mac", 0x1ef0000, 0x00200},
677 {"pin", 0x1ef0200, 0x00200},
678 {"product-info", 0x1ef0400, 0x0fc00},
679 {"partition-table", 0x1f00000, 0x10000},
680 {"soft-version", 0x1f10000, 0x10000},
681 {"support-list", 0x1f20000, 0x10000},
682 {"profile", 0x1f30000, 0x10000},
683 {"default-config", 0x1f40000, 0x10000},
684 {"user-config", 0x1f50000, 0x40000},
685 {"qos-db", 0x1f90000, 0x40000},
686 {"usb-config", 0x1fd0000, 0x10000},
687 {"log", 0x1fe0000, 0x20000},
691 .first_sysupgrade_partition
= "os-image",
692 .last_sysupgrade_partition
= "file-system"
695 /** Firmware layout for the A7-V5 */
697 .id
= "ARCHER-A7-V5",
700 "{product_name:Archer A7,product_ver:5.0.0,special_id:45550000}\n"
701 "{product_name:Archer A7,product_ver:5.0.0,special_id:55530000}\n"
702 "{product_name:Archer A7,product_ver:5.0.0,special_id:43410000}\n"
703 "{product_name:Archer A7,product_ver:5.0.0,special_id:4A500000}\n"
704 "{product_name:Archer A7,product_ver:5.0.0,special_id:54570000}\n",
705 .support_trail
= '\x00',
706 .soft_ver
= "soft_ver:1.0.0\n",
708 /* We're using a dynamic kernel/rootfs split here */
710 {"factory-boot", 0x00000, 0x20000},
711 {"fs-uboot", 0x20000, 0x20000},
712 {"firmware", 0x40000, 0xec0000}, /* Stock: name os-image base 0x40000 size 0x120000 */
713 /* Stock: name file-system base 0x160000 size 0xda0000 */
714 {"default-mac", 0xf40000, 0x00200},
715 {"pin", 0xf40200, 0x00200},
716 {"device-id", 0xf40400, 0x00100},
717 {"product-info", 0xf40500, 0x0fb00},
718 {"soft-version", 0xf50000, 0x00100},
719 {"extra-para", 0xf51000, 0x01000},
720 {"support-list", 0xf52000, 0x0a000},
721 {"profile", 0xf5c000, 0x04000},
722 {"default-config", 0xf60000, 0x10000},
723 {"user-config", 0xf70000, 0x40000},
724 {"certificate", 0xfb0000, 0x10000},
725 {"partition-table", 0xfc0000, 0x10000},
726 {"log", 0xfd0000, 0x20000},
727 {"radio", 0xff0000, 0x10000},
731 .first_sysupgrade_partition
= "os-image",
732 .last_sysupgrade_partition
= "file-system",
735 /** Firmware layout for the C2v3 */
737 .id
= "ARCHER-C2-V3",
740 "{product_name:ArcherC2,product_ver:3.0.0,special_id:00000000}\n"
741 "{product_name:ArcherC2,product_ver:3.0.0,special_id:55530000}\n"
742 "{product_name:ArcherC2,product_ver:3.0.0,special_id:45550000}\n",
743 .support_trail
= '\x00',
744 .soft_ver
= "soft_ver:3.0.1\n",
746 /** We're using a dynamic kernel/rootfs split here */
749 {"factory-boot", 0x00000, 0x20000},
750 {"fs-uboot", 0x20000, 0x10000},
751 {"firmware", 0x30000, 0x7a0000},
752 {"user-config", 0x7d0000, 0x04000},
753 {"default-mac", 0x7e0000, 0x00100},
754 {"device-id", 0x7e0100, 0x00100},
755 {"extra-para", 0x7e0200, 0x00100},
756 {"pin", 0x7e0300, 0x00100},
757 {"support-list", 0x7e0400, 0x00400},
758 {"soft-version", 0x7e0800, 0x00400},
759 {"product-info", 0x7e0c00, 0x01400},
760 {"partition-table", 0x7e2000, 0x01000},
761 {"profile", 0x7e3000, 0x01000},
762 {"default-config", 0x7e4000, 0x04000},
763 {"merge-config", 0x7ec000, 0x02000},
764 {"qos-db", 0x7ee000, 0x02000},
765 {"radio", 0x7f0000, 0x10000},
769 .first_sysupgrade_partition
= "os-image",
770 .last_sysupgrade_partition
= "file-system",
773 /** Firmware layout for the C25v1 */
775 .id
= "ARCHER-C25-V1",
778 "{product_name:ArcherC25,product_ver:1.0.0,special_id:00000000}\n"
779 "{product_name:ArcherC25,product_ver:1.0.0,special_id:55530000}\n"
780 "{product_name:ArcherC25,product_ver:1.0.0,special_id:45550000}\n",
781 .support_trail
= '\x00',
782 .soft_ver
= "soft_ver:1.0.0\n",
784 /* We're using a dynamic kernel/rootfs split here */
786 {"factory-boot", 0x00000, 0x20000},
787 {"fs-uboot", 0x20000, 0x10000},
788 {"firmware", 0x30000, 0x7a0000}, /* Stock: name os-image base 0x30000 size 0x100000 */
789 /* Stock: name file-system base 0x130000 size 0x6a0000 */
790 {"user-config", 0x7d0000, 0x04000},
791 {"default-mac", 0x7e0000, 0x00100},
792 {"device-id", 0x7e0100, 0x00100},
793 {"extra-para", 0x7e0200, 0x00100},
794 {"pin", 0x7e0300, 0x00100},
795 {"support-list", 0x7e0400, 0x00400},
796 {"soft-version", 0x7e0800, 0x00400},
797 {"product-info", 0x7e0c00, 0x01400},
798 {"partition-table", 0x7e2000, 0x01000},
799 {"profile", 0x7e3000, 0x01000},
800 {"default-config", 0x7e4000, 0x04000},
801 {"merge-config", 0x7ec000, 0x02000},
802 {"qos-db", 0x7ee000, 0x02000},
803 {"radio", 0x7f0000, 0x10000},
807 .first_sysupgrade_partition
= "os-image",
808 .last_sysupgrade_partition
= "file-system",
811 /** Firmware layout for the C58v1 */
813 .id
= "ARCHER-C58-V1",
817 "{product_name:Archer C58,product_ver:1.0.0,special_id:00000000}\r\n"
818 "{product_name:Archer C58,product_ver:1.0.0,special_id:45550000}\r\n"
819 "{product_name:Archer C58,product_ver:1.0.0,special_id:55530000}\r\n",
820 .support_trail
= '\x00',
821 .soft_ver
= "soft_ver:1.0.0\n",
824 {"fs-uboot", 0x00000, 0x10000},
825 {"default-mac", 0x10000, 0x00200},
826 {"pin", 0x10200, 0x00200},
827 {"product-info", 0x10400, 0x00100},
828 {"partition-table", 0x10500, 0x00800},
829 {"soft-version", 0x11300, 0x00200},
830 {"support-list", 0x11500, 0x00100},
831 {"device-id", 0x11600, 0x00100},
832 {"profile", 0x11700, 0x03900},
833 {"default-config", 0x15000, 0x04000},
834 {"user-config", 0x19000, 0x04000},
835 {"firmware", 0x20000, 0x7c8000},
836 {"certyficate", 0x7e8000, 0x08000},
837 {"radio", 0x7f0000, 0x10000},
841 .first_sysupgrade_partition
= "os-image",
842 .last_sysupgrade_partition
= "file-system",
845 /** Firmware layout for the C59v1 */
847 .id
= "ARCHER-C59-V1",
851 "{product_name:Archer C59,product_ver:1.0.0,special_id:00000000}\r\n"
852 "{product_name:Archer C59,product_ver:1.0.0,special_id:45550000}\r\n"
853 "{product_name:Archer C59,product_ver:1.0.0,special_id:52550000}\r\n"
854 "{product_name:Archer C59,product_ver:1.0.0,special_id:55530000}\r\n",
855 .support_trail
= '\x00',
856 .soft_ver
= "soft_ver:1.0.0\n",
858 /* We're using a dynamic kernel/rootfs split here */
860 {"fs-uboot", 0x00000, 0x10000},
861 {"default-mac", 0x10000, 0x00200},
862 {"pin", 0x10200, 0x00200},
863 {"device-id", 0x10400, 0x00100},
864 {"product-info", 0x10500, 0x0fb00},
865 {"firmware", 0x20000, 0xe30000},
866 {"partition-table", 0xe50000, 0x10000},
867 {"soft-version", 0xe60000, 0x10000},
868 {"support-list", 0xe70000, 0x10000},
869 {"profile", 0xe80000, 0x10000},
870 {"default-config", 0xe90000, 0x10000},
871 {"user-config", 0xea0000, 0x40000},
872 {"usb-config", 0xee0000, 0x10000},
873 {"certificate", 0xef0000, 0x10000},
874 {"qos-db", 0xf00000, 0x40000},
875 {"log", 0xfe0000, 0x10000},
876 {"radio", 0xff0000, 0x10000},
880 .first_sysupgrade_partition
= "os-image",
881 .last_sysupgrade_partition
= "file-system",
884 /** Firmware layout for the C59v2 */
886 .id
= "ARCHER-C59-V2",
890 "{product_name:Archer C59,product_ver:2.0.0,special_id:00000000}\r\n"
891 "{product_name:Archer C59,product_ver:2.0.0,special_id:45550000}\r\n"
892 "{product_name:Archer C59,product_ver:2.0.0,special_id:55530000}\r\n",
893 .support_trail
= '\x00',
894 .soft_ver
= "soft_ver:2.0.0 Build 20161206 rel.7303\n",
896 /** We're using a dynamic kernel/rootfs split here */
898 {"factory-boot", 0x00000, 0x20000},
899 {"fs-uboot", 0x20000, 0x10000},
900 {"default-mac", 0x30000, 0x00200},
901 {"pin", 0x30200, 0x00200},
902 {"device-id", 0x30400, 0x00100},
903 {"product-info", 0x30500, 0x0fb00},
904 {"firmware", 0x40000, 0xe10000},
905 {"partition-table", 0xe50000, 0x10000},
906 {"soft-version", 0xe60000, 0x10000},
907 {"support-list", 0xe70000, 0x10000},
908 {"profile", 0xe80000, 0x10000},
909 {"default-config", 0xe90000, 0x10000},
910 {"user-config", 0xea0000, 0x40000},
911 {"usb-config", 0xee0000, 0x10000},
912 {"certificate", 0xef0000, 0x10000},
913 {"extra-para", 0xf00000, 0x10000},
914 {"qos-db", 0xf10000, 0x30000},
915 {"log", 0xfe0000, 0x10000},
916 {"radio", 0xff0000, 0x10000},
920 .first_sysupgrade_partition
= "os-image",
921 .last_sysupgrade_partition
= "file-system",
924 /** Firmware layout for the Archer C6 v2 (EU/RU/JP) */
926 .id
= "ARCHER-C6-V2",
930 "{product_name:Archer C6,product_ver:2.0.0,special_id:45550000}\r\n"
931 "{product_name:Archer C6,product_ver:2.0.0,special_id:52550000}\r\n"
932 "{product_name:Archer C6,product_ver:2.0.0,special_id:4A500000}\r\n",
933 .support_trail
= '\x00',
934 .soft_ver
= "soft_ver:1.2.1\n",
937 {"fs-uboot", 0x00000, 0x20000},
938 {"default-mac", 0x20000, 0x00200},
939 {"pin", 0x20200, 0x00100},
940 {"product-info", 0x20300, 0x00200},
941 {"device-id", 0x20500, 0x0fb00},
942 {"firmware", 0x30000, 0x7a9400},
943 {"soft-version", 0x7d9400, 0x00100},
944 {"extra-para", 0x7d9500, 0x00100},
945 {"support-list", 0x7d9600, 0x00200},
946 {"profile", 0x7d9800, 0x03000},
947 {"default-config", 0x7dc800, 0x03000},
948 {"partition-table", 0x7df800, 0x00800},
949 {"user-config", 0x7e0000, 0x0c000},
950 {"certificate", 0x7ec000, 0x04000},
951 {"radio", 0x7f0000, 0x10000},
955 .first_sysupgrade_partition
= "os-image",
956 .last_sysupgrade_partition
= "file-system",
959 /** Firmware layout for the Archer C6 v2 (US) and A6 v2 (US/TW) */
961 .id
= "ARCHER-C6-V2-US",
965 "{product_name:Archer A6,product_ver:2.0.0,special_id:55530000}\n"
966 "{product_name:Archer A6,product_ver:2.0.0,special_id:54570000}\n"
967 "{product_name:Archer C6,product_ver:2.0.0,special_id:55530000}\n",
968 .support_trail
= '\x00',
969 .soft_ver
= "soft_ver:1.1.1\n",
972 {"factory-boot", 0x00000, 0x20000},
973 {"default-mac", 0x20000, 0x00200},
974 {"pin", 0x20200, 0x00100},
975 {"product-info", 0x20300, 0x00200},
976 {"device-id", 0x20500, 0x0fb00},
977 {"fs-uboot", 0x30000, 0x20000},
978 {"firmware", 0x50000, 0xf89400},
979 {"soft-version", 0xfd9400, 0x00100},
980 {"extra-para", 0xfd9500, 0x00100},
981 {"support-list", 0xfd9600, 0x00200},
982 {"profile", 0xfd9800, 0x03000},
983 {"default-config", 0xfdc800, 0x03000},
984 {"partition-table", 0xfdf800, 0x00800},
985 {"user-config", 0xfe0000, 0x0c000},
986 {"certificate", 0xfec000, 0x04000},
987 {"radio", 0xff0000, 0x10000},
990 .first_sysupgrade_partition
= "os-image",
991 .last_sysupgrade_partition
= "file-system",
994 /** Firmware layout for the C60v1 */
996 .id
= "ARCHER-C60-V1",
1000 "{product_name:Archer C60,product_ver:1.0.0,special_id:00000000}\r\n"
1001 "{product_name:Archer C60,product_ver:1.0.0,special_id:45550000}\r\n"
1002 "{product_name:Archer C60,product_ver:1.0.0,special_id:55530000}\r\n",
1003 .support_trail
= '\x00',
1004 .soft_ver
= "soft_ver:1.0.0\n",
1007 {"fs-uboot", 0x00000, 0x10000},
1008 {"default-mac", 0x10000, 0x00200},
1009 {"pin", 0x10200, 0x00200},
1010 {"product-info", 0x10400, 0x00100},
1011 {"partition-table", 0x10500, 0x00800},
1012 {"soft-version", 0x11300, 0x00200},
1013 {"support-list", 0x11500, 0x00100},
1014 {"device-id", 0x11600, 0x00100},
1015 {"profile", 0x11700, 0x03900},
1016 {"default-config", 0x15000, 0x04000},
1017 {"user-config", 0x19000, 0x04000},
1018 {"firmware", 0x20000, 0x7c8000},
1019 {"certyficate", 0x7e8000, 0x08000},
1020 {"radio", 0x7f0000, 0x10000},
1024 .first_sysupgrade_partition
= "os-image",
1025 .last_sysupgrade_partition
= "file-system",
1028 /** Firmware layout for the C60v2 */
1030 .id
= "ARCHER-C60-V2",
1034 "{product_name:Archer C60,product_ver:2.0.0,special_id:42520000}\r\n"
1035 "{product_name:Archer C60,product_ver:2.0.0,special_id:45550000}\r\n"
1036 "{product_name:Archer C60,product_ver:2.0.0,special_id:55530000}\r\n",
1037 .support_trail
= '\x00',
1038 .soft_ver
= "soft_ver:2.0.0\n",
1041 {"factory-boot", 0x00000, 0x1fb00},
1042 {"default-mac", 0x1fb00, 0x00200},
1043 {"pin", 0x1fd00, 0x00100},
1044 {"product-info", 0x1fe00, 0x00100},
1045 {"device-id", 0x1ff00, 0x00100},
1046 {"fs-uboot", 0x20000, 0x10000},
1047 {"firmware", 0x30000, 0x7a0000},
1048 {"soft-version", 0x7d9500, 0x00100},
1049 {"support-list", 0x7d9600, 0x00100},
1050 {"extra-para", 0x7d9700, 0x00100},
1051 {"profile", 0x7d9800, 0x03000},
1052 {"default-config", 0x7dc800, 0x03000},
1053 {"partition-table", 0x7df800, 0x00800},
1054 {"user-config", 0x7e0000, 0x0c000},
1055 {"certificate", 0x7ec000, 0x04000},
1056 {"radio", 0x7f0000, 0x10000},
1060 .first_sysupgrade_partition
= "os-image",
1061 .last_sysupgrade_partition
= "file-system",
1064 /** Firmware layout for the C60v3 */
1066 .id
= "ARCHER-C60-V3",
1070 "{product_name:Archer C60,product_ver:3.0.0,special_id:42520000}\r\n"
1071 "{product_name:Archer C60,product_ver:3.0.0,special_id:45550000}\r\n"
1072 "{product_name:Archer C60,product_ver:3.0.0,special_id:55530000}\r\n",
1073 .support_trail
= '\x00',
1074 .soft_ver
= "soft_ver:3.0.0\n",
1077 {"factory-boot", 0x00000, 0x1fb00},
1078 {"default-mac", 0x1fb00, 0x00200},
1079 {"pin", 0x1fd00, 0x00100},
1080 {"product-info", 0x1fe00, 0x00100},
1081 {"device-id", 0x1ff00, 0x00100},
1082 {"fs-uboot", 0x20000, 0x10000},
1083 {"firmware", 0x30000, 0x7a0000},
1084 {"soft-version", 0x7d9500, 0x00100},
1085 {"support-list", 0x7d9600, 0x00100},
1086 {"extra-para", 0x7d9700, 0x00100},
1087 {"profile", 0x7d9800, 0x03000},
1088 {"default-config", 0x7dc800, 0x03000},
1089 {"partition-table", 0x7df800, 0x00800},
1090 {"user-config", 0x7e0000, 0x0c000},
1091 {"certificate", 0x7ec000, 0x04000},
1092 {"radio", 0x7f0000, 0x10000},
1096 .first_sysupgrade_partition
= "os-image",
1097 .last_sysupgrade_partition
= "file-system",
1100 /** Firmware layout for the C5 */
1102 .id
= "ARCHER-C5-V2",
1106 "{product_name:ArcherC5,product_ver:2.0.0,special_id:00000000}\r\n"
1107 "{product_name:ArcherC5,product_ver:2.0.0,special_id:55530000}\r\n"
1108 "{product_name:ArcherC5,product_ver:2.0.0,special_id:4A500000}\r\n", /* JP version */
1109 .support_trail
= '\x00',
1113 {"fs-uboot", 0x00000, 0x40000},
1114 {"os-image", 0x40000, 0x200000},
1115 {"file-system", 0x240000, 0xc00000},
1116 {"default-mac", 0xe40000, 0x00200},
1117 {"pin", 0xe40200, 0x00200},
1118 {"product-info", 0xe40400, 0x00200},
1119 {"partition-table", 0xe50000, 0x10000},
1120 {"soft-version", 0xe60000, 0x00200},
1121 {"support-list", 0xe61000, 0x0f000},
1122 {"profile", 0xe70000, 0x10000},
1123 {"default-config", 0xe80000, 0x10000},
1124 {"user-config", 0xe90000, 0x50000},
1125 {"log", 0xee0000, 0x100000},
1126 {"radio_bk", 0xfe0000, 0x10000},
1127 {"radio", 0xff0000, 0x10000},
1131 .first_sysupgrade_partition
= "os-image",
1132 .last_sysupgrade_partition
= "file-system"
1135 /** Firmware layout for the C7 */
1137 .id
= "ARCHER-C7-V4",
1140 "{product_name:Archer C7,product_ver:4.0.0,special_id:00000000}\n"
1141 "{product_name:Archer C7,product_ver:4.0.0,special_id:41550000}\n"
1142 "{product_name:Archer C7,product_ver:4.0.0,special_id:45550000}\n"
1143 "{product_name:Archer C7,product_ver:4.0.0,special_id:4B520000}\n"
1144 "{product_name:Archer C7,product_ver:4.0.0,special_id:42520000}\n"
1145 "{product_name:Archer C7,product_ver:4.0.0,special_id:4A500000}\n"
1146 "{product_name:Archer C7,product_ver:4.0.0,special_id:52550000}\n"
1147 "{product_name:Archer C7,product_ver:4.0.0,special_id:54570000}\n"
1148 "{product_name:Archer C7,product_ver:4.0.0,special_id:55530000}\n"
1149 "{product_name:Archer C7,product_ver:4.0.0,special_id:43410000}\n",
1150 .support_trail
= '\x00',
1151 .soft_ver
= "soft_ver:1.0.0\n",
1153 /* We're using a dynamic kernel/rootfs split here */
1155 {"factory-boot", 0x00000, 0x20000},
1156 {"fs-uboot", 0x20000, 0x20000},
1157 {"firmware", 0x40000, 0xEC0000}, /* Stock: name os-image base 0x40000 size 0x120000 */
1158 /* Stock: name file-system base 0x160000 size 0xda0000 */
1159 {"default-mac", 0xf00000, 0x00200},
1160 {"pin", 0xf00200, 0x00200},
1161 {"device-id", 0xf00400, 0x00100},
1162 {"product-info", 0xf00500, 0x0fb00},
1163 {"soft-version", 0xf10000, 0x00100},
1164 {"extra-para", 0xf11000, 0x01000},
1165 {"support-list", 0xf12000, 0x0a000},
1166 {"profile", 0xf1c000, 0x04000},
1167 {"default-config", 0xf20000, 0x10000},
1168 {"user-config", 0xf30000, 0x40000},
1169 {"qos-db", 0xf70000, 0x40000},
1170 {"certificate", 0xfb0000, 0x10000},
1171 {"partition-table", 0xfc0000, 0x10000},
1172 {"log", 0xfd0000, 0x20000},
1173 {"radio", 0xff0000, 0x10000},
1177 .first_sysupgrade_partition
= "os-image",
1178 .last_sysupgrade_partition
= "file-system",
1181 /** Firmware layout for the C7 v5*/
1183 .id
= "ARCHER-C7-V5",
1186 "{product_name:Archer C7,product_ver:5.0.0,special_id:00000000}\n"
1187 "{product_name:Archer C7,product_ver:5.0.0,special_id:45550000}\n"
1188 "{product_name:Archer C7,product_ver:5.0.0,special_id:55530000}\n"
1189 "{product_name:Archer C7,product_ver:5.0.0,special_id:43410000}\n"
1190 "{product_name:Archer C7,product_ver:5.0.0,special_id:4A500000}\n"
1191 "{product_name:Archer C7,product_ver:5.0.0,special_id:54570000}\n"
1192 "{product_name:Archer C7,product_ver:5.0.0,special_id:52550000}\n"
1193 "{product_name:Archer C7,product_ver:5.0.0,special_id:4B520000}\n",
1195 .support_trail
= '\x00',
1196 .soft_ver
= "soft_ver:1.0.0\n",
1198 /* We're using a dynamic kernel/rootfs split here */
1200 {"factory-boot", 0x00000, 0x20000},
1201 {"fs-uboot", 0x20000, 0x20000},
1202 {"partition-table", 0x40000, 0x10000},
1203 {"radio", 0x50000, 0x10000},
1204 {"default-mac", 0x60000, 0x00200},
1205 {"pin", 0x60200, 0x00200},
1206 {"device-id", 0x60400, 0x00100},
1207 {"product-info", 0x60500, 0x0fb00},
1208 {"soft-version", 0x70000, 0x01000},
1209 {"extra-para", 0x71000, 0x01000},
1210 {"support-list", 0x72000, 0x0a000},
1211 {"profile", 0x7c000, 0x04000},
1212 {"user-config", 0x80000, 0x40000},
1215 {"firmware", 0xc0000, 0xf00000}, /* Stock: name os-image base 0xc0000 size 0x120000 */
1216 /* Stock: name file-system base 0x1e0000 size 0xde0000 */
1218 {"log", 0xfc0000, 0x20000},
1219 {"certificate", 0xfe0000, 0x10000},
1220 {"default-config", 0xff0000, 0x10000},
1225 .first_sysupgrade_partition
= "os-image",
1226 .last_sysupgrade_partition
= "file-system",
1229 /** Firmware layout for the C9 */
1235 "{product_name:ArcherC9,"
1236 "product_ver:1.0.0,"
1237 "special_id:00000000}\n",
1238 .support_trail
= '\x00',
1242 {"fs-uboot", 0x00000, 0x40000},
1243 {"os-image", 0x40000, 0x200000},
1244 {"file-system", 0x240000, 0xc00000},
1245 {"default-mac", 0xe40000, 0x00200},
1246 {"pin", 0xe40200, 0x00200},
1247 {"product-info", 0xe40400, 0x00200},
1248 {"partition-table", 0xe50000, 0x10000},
1249 {"soft-version", 0xe60000, 0x00200},
1250 {"support-list", 0xe61000, 0x0f000},
1251 {"profile", 0xe70000, 0x10000},
1252 {"default-config", 0xe80000, 0x10000},
1253 {"user-config", 0xe90000, 0x50000},
1254 {"log", 0xee0000, 0x100000},
1255 {"radio_bk", 0xfe0000, 0x10000},
1256 {"radio", 0xff0000, 0x10000},
1260 .first_sysupgrade_partition
= "os-image",
1261 .last_sysupgrade_partition
= "file-system"
1264 /** Firmware layout for the EAP120 */
1267 .vendor
= "EAP120(TP-LINK|UN|N300-2):1.0\r\n",
1270 "EAP120(TP-LINK|UN|N300-2):1.0\r\n",
1271 .support_trail
= '\xff',
1275 {"fs-uboot", 0x00000, 0x20000},
1276 {"partition-table", 0x20000, 0x02000},
1277 {"default-mac", 0x30000, 0x00020},
1278 {"support-list", 0x31000, 0x00100},
1279 {"product-info", 0x31100, 0x00100},
1280 {"soft-version", 0x32000, 0x00100},
1281 {"os-image", 0x40000, 0x180000},
1282 {"file-system", 0x1c0000, 0x600000},
1283 {"user-config", 0x7c0000, 0x10000},
1284 {"backup-config", 0x7d0000, 0x10000},
1285 {"log", 0x7e0000, 0x10000},
1286 {"radio", 0x7f0000, 0x10000},
1290 .first_sysupgrade_partition
= "os-image",
1291 .last_sysupgrade_partition
= "file-system"
1294 /** Firmware layout for the TL-WA850RE v2 */
1296 .id
= "TLWA850REV2",
1300 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:55530000}\n"
1301 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:00000000}\n"
1302 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:55534100}\n"
1303 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:45550000}\n"
1304 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:4B520000}\n"
1305 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:42520000}\n"
1306 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:4A500000}\n"
1307 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:43410000}\n"
1308 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:41550000}\n"
1309 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:52550000}\n",
1310 .support_trail
= '\x00',
1314 576KB were moved from file-system to os-image
1315 in comparison to the stock image
1318 {"fs-uboot", 0x00000, 0x20000},
1319 {"firmware", 0x20000, 0x390000},
1320 {"partition-table", 0x3b0000, 0x02000},
1321 {"default-mac", 0x3c0000, 0x00020},
1322 {"pin", 0x3c0100, 0x00020},
1323 {"product-info", 0x3c1000, 0x01000},
1324 {"soft-version", 0x3c2000, 0x00100},
1325 {"support-list", 0x3c3000, 0x01000},
1326 {"profile", 0x3c4000, 0x08000},
1327 {"user-config", 0x3d0000, 0x10000},
1328 {"default-config", 0x3e0000, 0x10000},
1329 {"radio", 0x3f0000, 0x10000},
1333 .first_sysupgrade_partition
= "os-image",
1334 .last_sysupgrade_partition
= "file-system"
1337 /** Firmware layout for the TL-WA855RE v1 */
1339 .id
= "TLWA855REV1",
1343 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:00000000}\n"
1344 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:55530000}\n"
1345 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:45550000}\n"
1346 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:4B520000}\n"
1347 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:42520000}\n"
1348 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:4A500000}\n"
1349 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:43410000}\n"
1350 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:41550000}\n"
1351 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:52550000}\n",
1352 .support_trail
= '\x00',
1356 {"fs-uboot", 0x00000, 0x20000},
1357 {"os-image", 0x20000, 0x150000},
1358 {"file-system", 0x170000, 0x240000},
1359 {"partition-table", 0x3b0000, 0x02000},
1360 {"default-mac", 0x3c0000, 0x00020},
1361 {"pin", 0x3c0100, 0x00020},
1362 {"product-info", 0x3c1000, 0x01000},
1363 {"soft-version", 0x3c2000, 0x00100},
1364 {"support-list", 0x3c3000, 0x01000},
1365 {"profile", 0x3c4000, 0x08000},
1366 {"user-config", 0x3d0000, 0x10000},
1367 {"default-config", 0x3e0000, 0x10000},
1368 {"radio", 0x3f0000, 0x10000},
1372 .first_sysupgrade_partition
= "os-image",
1373 .last_sysupgrade_partition
= "file-system"
1376 /** Firmware layout for the TL-WR1043 v5 */
1378 .id
= "TLWR1043NV5",
1382 "{product_name:TL-WR1043N,product_ver:5.0.0,special_id:45550000}\n"
1383 "{product_name:TL-WR1043N,product_ver:5.0.0,special_id:55530000}\n",
1384 .support_trail
= '\x00',
1385 .soft_ver
= "soft_ver:1.0.0\n",
1387 {"factory-boot", 0x00000, 0x20000},
1388 {"fs-uboot", 0x20000, 0x20000},
1389 {"firmware", 0x40000, 0xec0000},
1390 {"default-mac", 0xf00000, 0x00200},
1391 {"pin", 0xf00200, 0x00200},
1392 {"device-id", 0xf00400, 0x00100},
1393 {"product-info", 0xf00500, 0x0fb00},
1394 {"soft-version", 0xf10000, 0x01000},
1395 {"extra-para", 0xf11000, 0x01000},
1396 {"support-list", 0xf12000, 0x0a000},
1397 {"profile", 0xf1c000, 0x04000},
1398 {"default-config", 0xf20000, 0x10000},
1399 {"user-config", 0xf30000, 0x40000},
1400 {"qos-db", 0xf70000, 0x40000},
1401 {"certificate", 0xfb0000, 0x10000},
1402 {"partition-table", 0xfc0000, 0x10000},
1403 {"log", 0xfd0000, 0x20000},
1404 {"radio", 0xff0000, 0x10000},
1407 .first_sysupgrade_partition
= "os-image",
1408 .last_sysupgrade_partition
= "file-system"
1411 /** Firmware layout for the TL-WR1043 v4 */
1413 .id
= "TLWR1043NDV4",
1417 "{product_name:TL-WR1043ND,product_ver:4.0.0,special_id:45550000}\n",
1418 .support_trail
= '\x00',
1421 /* We're using a dynamic kernel/rootfs split here */
1423 {"fs-uboot", 0x00000, 0x20000},
1424 {"firmware", 0x20000, 0xf30000},
1425 {"default-mac", 0xf50000, 0x00200},
1426 {"pin", 0xf50200, 0x00200},
1427 {"product-info", 0xf50400, 0x0fc00},
1428 {"soft-version", 0xf60000, 0x0b000},
1429 {"support-list", 0xf6b000, 0x04000},
1430 {"profile", 0xf70000, 0x04000},
1431 {"default-config", 0xf74000, 0x0b000},
1432 {"user-config", 0xf80000, 0x40000},
1433 {"partition-table", 0xfc0000, 0x10000},
1434 {"log", 0xfd0000, 0x20000},
1435 {"radio", 0xff0000, 0x10000},
1439 .first_sysupgrade_partition
= "os-image",
1440 .last_sysupgrade_partition
= "file-system"
1443 /** Firmware layout for the TL-WR902AC v1 */
1445 .id
= "TL-WR902AC-V1",
1449 "{product_name:TL-WR902AC,product_ver:1.0.0,special_id:45550000}\n"
1450 "{product_name:TL-WR902AC,product_ver:1.0.0,special_id:55530000}\n",
1451 .support_trail
= '\x00',
1455 384KB were moved from file-system to os-image
1456 in comparison to the stock image
1459 {"fs-uboot", 0x00000, 0x20000},
1460 {"firmware", 0x20000, 0x730000},
1461 {"default-mac", 0x750000, 0x00200},
1462 {"pin", 0x750200, 0x00200},
1463 {"product-info", 0x750400, 0x0fc00},
1464 {"soft-version", 0x760000, 0x0b000},
1465 {"support-list", 0x76b000, 0x04000},
1466 {"profile", 0x770000, 0x04000},
1467 {"default-config", 0x774000, 0x0b000},
1468 {"user-config", 0x780000, 0x40000},
1469 {"partition-table", 0x7c0000, 0x10000},
1470 {"log", 0x7d0000, 0x20000},
1471 {"radio", 0x7f0000, 0x10000},
1475 .first_sysupgrade_partition
= "os-image",
1476 .last_sysupgrade_partition
= "file-system",
1479 /** Firmware layout for the TL-WR942N V1 */
1485 "{product_name:TL-WR942N,product_ver:1.0.0,special_id:00000000}\r\n"
1486 "{product_name:TL-WR942N,product_ver:1.0.0,special_id:52550000}\r\n",
1487 .support_trail
= '\x00',
1491 {"fs-uboot", 0x00000, 0x20000},
1492 {"firmware", 0x20000, 0xe20000},
1493 {"default-mac", 0xe40000, 0x00200},
1494 {"pin", 0xe40200, 0x00200},
1495 {"product-info", 0xe40400, 0x0fc00},
1496 {"partition-table", 0xe50000, 0x10000},
1497 {"soft-version", 0xe60000, 0x10000},
1498 {"support-list", 0xe70000, 0x10000},
1499 {"profile", 0xe80000, 0x10000},
1500 {"default-config", 0xe90000, 0x10000},
1501 {"user-config", 0xea0000, 0x40000},
1502 {"qos-db", 0xee0000, 0x40000},
1503 {"certificate", 0xf20000, 0x10000},
1504 {"usb-config", 0xfb0000, 0x10000},
1505 {"log", 0xfc0000, 0x20000},
1506 {"radio-bk", 0xfe0000, 0x10000},
1507 {"radio", 0xff0000, 0x10000},
1511 .first_sysupgrade_partition
= "os-image",
1512 .last_sysupgrade_partition
= "file-system",
1515 /** Firmware layout for the RE200 v2 */
1521 "{product_name:RE200,product_ver:2.0.0,special_id:00000000}\n"
1522 "{product_name:RE200,product_ver:2.0.0,special_id:41520000}\n"
1523 "{product_name:RE200,product_ver:2.0.0,special_id:41550000}\n"
1524 "{product_name:RE200,product_ver:2.0.0,special_id:42520000}\n"
1525 "{product_name:RE200,product_ver:2.0.0,special_id:43410000}\n"
1526 "{product_name:RE200,product_ver:2.0.0,special_id:45530000}\n"
1527 "{product_name:RE200,product_ver:2.0.0,special_id:45550000}\n"
1528 "{product_name:RE200,product_ver:2.0.0,special_id:49440000}\n"
1529 "{product_name:RE200,product_ver:2.0.0,special_id:4a500000}\n"
1530 "{product_name:RE200,product_ver:2.0.0,special_id:4b520000}\n"
1531 "{product_name:RE200,product_ver:2.0.0,special_id:52550000}\n"
1532 "{product_name:RE200,product_ver:2.0.0,special_id:54570000}\n"
1533 "{product_name:RE200,product_ver:2.0.0,special_id:55530000}\n",
1534 .support_trail
= '\x00',
1538 {"fs-uboot", 0x00000, 0x20000},
1539 {"firmware", 0x20000, 0x7a0000},
1540 {"partition-table", 0x7c0000, 0x02000},
1541 {"default-mac", 0x7c2000, 0x00020},
1542 {"pin", 0x7c2100, 0x00020},
1543 {"product-info", 0x7c3100, 0x01000},
1544 {"soft-version", 0x7c4200, 0x01000},
1545 {"support-list", 0x7c5200, 0x01000},
1546 {"profile", 0x7c6200, 0x08000},
1547 {"config-info", 0x7ce200, 0x00400},
1548 {"user-config", 0x7d0000, 0x10000},
1549 {"default-config", 0x7e0000, 0x10000},
1550 {"radio", 0x7f0000, 0x10000},
1554 .first_sysupgrade_partition
= "os-image",
1555 .last_sysupgrade_partition
= "file-system"
1558 /** Firmware layout for the RE220 v2 */
1564 "{product_name:RE220,product_ver:2.0.0,special_id:00000000}\n"
1565 "{product_name:RE220,product_ver:2.0.0,special_id:41520000}\n"
1566 "{product_name:RE220,product_ver:2.0.0,special_id:41550000}\n"
1567 "{product_name:RE220,product_ver:2.0.0,special_id:42520000}\n"
1568 "{product_name:RE220,product_ver:2.0.0,special_id:43410000}\n"
1569 "{product_name:RE220,product_ver:2.0.0,special_id:45530000}\n"
1570 "{product_name:RE220,product_ver:2.0.0,special_id:45550000}\n"
1571 "{product_name:RE220,product_ver:2.0.0,special_id:49440000}\n"
1572 "{product_name:RE220,product_ver:2.0.0,special_id:4a500000}\n"
1573 "{product_name:RE220,product_ver:2.0.0,special_id:4b520000}\n"
1574 "{product_name:RE220,product_ver:2.0.0,special_id:52550000}\n"
1575 "{product_name:RE220,product_ver:2.0.0,special_id:54570000}\n"
1576 "{product_name:RE220,product_ver:2.0.0,special_id:55530000}\n",
1577 .support_trail
= '\x00',
1581 {"fs-uboot", 0x00000, 0x20000},
1582 {"firmware", 0x20000, 0x7a0000},
1583 {"partition-table", 0x7c0000, 0x02000},
1584 {"default-mac", 0x7c2000, 0x00020},
1585 {"pin", 0x7c2100, 0x00020},
1586 {"product-info", 0x7c3100, 0x01000},
1587 {"soft-version", 0x7c4200, 0x01000},
1588 {"support-list", 0x7c5200, 0x01000},
1589 {"profile", 0x7c6200, 0x08000},
1590 {"config-info", 0x7ce200, 0x00400},
1591 {"user-config", 0x7d0000, 0x10000},
1592 {"default-config", 0x7e0000, 0x10000},
1593 {"radio", 0x7f0000, 0x10000},
1597 .first_sysupgrade_partition
= "os-image",
1598 .last_sysupgrade_partition
= "file-system"
1601 /** Firmware layout for the RE305 v1 */
1607 "{product_name:RE305,product_ver:1.0.0,special_id:45550000}\n"
1608 "{product_name:RE305,product_ver:1.0.0,special_id:55530000}\n"
1609 "{product_name:RE305,product_ver:1.0.0,special_id:4a500000}\n"
1610 "{product_name:RE305,product_ver:1.0.0,special_id:42520000}\n"
1611 "{product_name:RE305,product_ver:1.0.0,special_id:4b520000}\n"
1612 "{product_name:RE305,product_ver:1.0.0,special_id:41550000}\n"
1613 "{product_name:RE305,product_ver:1.0.0,special_id:43410000}\n",
1614 .support_trail
= '\x00',
1618 {"fs-uboot", 0x00000, 0x20000},
1619 {"firmware", 0x20000, 0x5e0000},
1620 {"partition-table", 0x600000, 0x02000},
1621 {"default-mac", 0x610000, 0x00020},
1622 {"pin", 0x610100, 0x00020},
1623 {"product-info", 0x611100, 0x01000},
1624 {"soft-version", 0x620000, 0x01000},
1625 {"support-list", 0x621000, 0x01000},
1626 {"profile", 0x622000, 0x08000},
1627 {"user-config", 0x630000, 0x10000},
1628 {"default-config", 0x640000, 0x10000},
1629 {"radio", 0x7f0000, 0x10000},
1633 .first_sysupgrade_partition
= "os-image",
1634 .last_sysupgrade_partition
= "file-system"
1637 /** Firmware layout for the RE350 v1 */
1643 "{product_name:RE350,product_ver:1.0.0,special_id:45550000}\n"
1644 "{product_name:RE350,product_ver:1.0.0,special_id:00000000}\n"
1645 "{product_name:RE350,product_ver:1.0.0,special_id:41550000}\n"
1646 "{product_name:RE350,product_ver:1.0.0,special_id:55530000}\n"
1647 "{product_name:RE350,product_ver:1.0.0,special_id:43410000}\n"
1648 "{product_name:RE350,product_ver:1.0.0,special_id:4b520000}\n"
1649 "{product_name:RE350,product_ver:1.0.0,special_id:4a500000}\n",
1650 .support_trail
= '\x00',
1653 /** We're using a dynamic kernel/rootfs split here */
1655 {"fs-uboot", 0x00000, 0x20000},
1656 {"firmware", 0x20000, 0x5e0000},
1657 {"partition-table", 0x600000, 0x02000},
1658 {"default-mac", 0x610000, 0x00020},
1659 {"pin", 0x610100, 0x00020},
1660 {"product-info", 0x611100, 0x01000},
1661 {"soft-version", 0x620000, 0x01000},
1662 {"support-list", 0x621000, 0x01000},
1663 {"profile", 0x622000, 0x08000},
1664 {"user-config", 0x630000, 0x10000},
1665 {"default-config", 0x640000, 0x10000},
1666 {"radio", 0x7f0000, 0x10000},
1670 .first_sysupgrade_partition
= "os-image",
1671 .last_sysupgrade_partition
= "file-system"
1674 /** Firmware layout for the RE350K v1 */
1680 "{product_name:RE350K,product_ver:1.0.0,special_id:00000000,product_region:US}\n",
1681 .support_trail
= '\x00',
1684 /** We're using a dynamic kernel/rootfs split here */
1686 {"fs-uboot", 0x00000, 0x20000},
1687 {"firmware", 0x20000, 0xd70000},
1688 {"partition-table", 0xd90000, 0x02000},
1689 {"default-mac", 0xda0000, 0x00020},
1690 {"pin", 0xda0100, 0x00020},
1691 {"product-info", 0xda1100, 0x01000},
1692 {"soft-version", 0xdb0000, 0x01000},
1693 {"support-list", 0xdb1000, 0x01000},
1694 {"profile", 0xdb2000, 0x08000},
1695 {"user-config", 0xdc0000, 0x10000},
1696 {"default-config", 0xdd0000, 0x10000},
1697 {"device-id", 0xde0000, 0x00108},
1698 {"radio", 0xff0000, 0x10000},
1702 .first_sysupgrade_partition
= "os-image",
1703 .last_sysupgrade_partition
= "file-system"
1706 /** Firmware layout for the RE355 */
1712 "{product_name:RE355,product_ver:1.0.0,special_id:00000000}\r\n"
1713 "{product_name:RE355,product_ver:1.0.0,special_id:55530000}\r\n"
1714 "{product_name:RE355,product_ver:1.0.0,special_id:45550000}\r\n"
1715 "{product_name:RE355,product_ver:1.0.0,special_id:4A500000}\r\n"
1716 "{product_name:RE355,product_ver:1.0.0,special_id:43410000}\r\n"
1717 "{product_name:RE355,product_ver:1.0.0,special_id:41550000}\r\n"
1718 "{product_name:RE355,product_ver:1.0.0,special_id:4B520000}\r\n"
1719 "{product_name:RE355,product_ver:1.0.0,special_id:55534100}\r\n",
1720 .support_trail
= '\x00',
1723 /* We're using a dynamic kernel/rootfs split here */
1725 {"fs-uboot", 0x00000, 0x20000},
1726 {"firmware", 0x20000, 0x5e0000},
1727 {"partition-table", 0x600000, 0x02000},
1728 {"default-mac", 0x610000, 0x00020},
1729 {"pin", 0x610100, 0x00020},
1730 {"product-info", 0x611100, 0x01000},
1731 {"soft-version", 0x620000, 0x01000},
1732 {"support-list", 0x621000, 0x01000},
1733 {"profile", 0x622000, 0x08000},
1734 {"user-config", 0x630000, 0x10000},
1735 {"default-config", 0x640000, 0x10000},
1736 {"radio", 0x7f0000, 0x10000},
1740 .first_sysupgrade_partition
= "os-image",
1741 .last_sysupgrade_partition
= "file-system"
1744 /** Firmware layout for the RE450 */
1750 "{product_name:RE450,product_ver:1.0.0,special_id:00000000}\r\n"
1751 "{product_name:RE450,product_ver:1.0.0,special_id:55530000}\r\n"
1752 "{product_name:RE450,product_ver:1.0.0,special_id:45550000}\r\n"
1753 "{product_name:RE450,product_ver:1.0.0,special_id:4A500000}\r\n"
1754 "{product_name:RE450,product_ver:1.0.0,special_id:43410000}\r\n"
1755 "{product_name:RE450,product_ver:1.0.0,special_id:41550000}\r\n"
1756 "{product_name:RE450,product_ver:1.0.0,special_id:4B520000}\r\n"
1757 "{product_name:RE450,product_ver:1.0.0,special_id:55534100}\r\n",
1758 .support_trail
= '\x00',
1761 /** We're using a dynamic kernel/rootfs split here */
1763 {"fs-uboot", 0x00000, 0x20000},
1764 {"firmware", 0x20000, 0x5e0000},
1765 {"partition-table", 0x600000, 0x02000},
1766 {"default-mac", 0x610000, 0x00020},
1767 {"pin", 0x610100, 0x00020},
1768 {"product-info", 0x611100, 0x01000},
1769 {"soft-version", 0x620000, 0x01000},
1770 {"support-list", 0x621000, 0x01000},
1771 {"profile", 0x622000, 0x08000},
1772 {"user-config", 0x630000, 0x10000},
1773 {"default-config", 0x640000, 0x10000},
1774 {"radio", 0x7f0000, 0x10000},
1778 .first_sysupgrade_partition
= "os-image",
1779 .last_sysupgrade_partition
= "file-system"
1782 /** Firmware layout for the RE450 v2 */
1788 "{product_name:RE450,product_ver:2.0.0,special_id:00000000}\r\n"
1789 "{product_name:RE450,product_ver:2.0.0,special_id:55530000}\r\n"
1790 "{product_name:RE450,product_ver:2.0.0,special_id:45550000}\r\n"
1791 "{product_name:RE450,product_ver:2.0.0,special_id:4A500000}\r\n"
1792 "{product_name:RE450,product_ver:2.0.0,special_id:43410000}\r\n"
1793 "{product_name:RE450,product_ver:2.0.0,special_id:41550000}\r\n"
1794 "{product_name:RE450,product_ver:2.0.0,special_id:41530000}\r\n"
1795 "{product_name:RE450,product_ver:2.0.0,special_id:4B520000}\r\n"
1796 "{product_name:RE450,product_ver:2.0.0,special_id:42520000}\r\n",
1797 .support_trail
= '\x00',
1800 /* We're using a dynamic kernel/rootfs split here */
1802 {"fs-uboot", 0x00000, 0x20000},
1803 {"firmware", 0x20000, 0x5e0000},
1804 {"partition-table", 0x600000, 0x02000},
1805 {"default-mac", 0x610000, 0x00020},
1806 {"pin", 0x610100, 0x00020},
1807 {"product-info", 0x611100, 0x01000},
1808 {"soft-version", 0x620000, 0x01000},
1809 {"support-list", 0x621000, 0x01000},
1810 {"profile", 0x622000, 0x08000},
1811 {"user-config", 0x630000, 0x10000},
1812 {"default-config", 0x640000, 0x10000},
1813 {"radio", 0x7f0000, 0x10000},
1817 .first_sysupgrade_partition
= "os-image",
1818 .last_sysupgrade_partition
= "file-system"
1821 /** Firmware layout for the RE450 v3 */
1827 "{product_name:RE450,product_ver:3.0.0,special_id:00000000}\r\n"
1828 "{product_name:RE450,product_ver:3.0.0,special_id:55530000}\r\n"
1829 "{product_name:RE450,product_ver:3.0.0,special_id:45550000}\r\n"
1830 "{product_name:RE450,product_ver:3.0.0,special_id:4A500000}\r\n"
1831 "{product_name:RE450,product_ver:3.0.0,special_id:43410000}\r\n"
1832 "{product_name:RE450,product_ver:3.0.0,special_id:41550000}\r\n"
1833 "{product_name:RE450,product_ver:3.0.0,special_id:41530000}\r\n"
1834 "{product_name:RE450,product_ver:3.0.0,special_id:4B520000}\r\n"
1835 "{product_name:RE450,product_ver:3.0.0,special_id:42520000}\r\n",
1836 .support_trail
= '\x00',
1839 /* We're using a dynamic kernel/rootfs split here */
1841 {"fs-uboot", 0x00000, 0x20000},
1842 {"default-mac", 0x20000, 0x00020},
1843 {"pin", 0x20020, 0x00020},
1844 {"product-info", 0x21000, 0x01000},
1845 {"partition-table", 0x22000, 0x02000},
1846 {"soft-version", 0x24000, 0x01000},
1847 {"support-list", 0x25000, 0x01000},
1848 {"profile", 0x26000, 0x08000},
1849 {"user-config", 0x2e000, 0x10000},
1850 {"default-config", 0x3e000, 0x10000},
1851 {"config-info", 0x4e000, 0x00400},
1852 {"firmware", 0x50000, 0x7a0000},
1853 {"radio", 0x7f0000, 0x10000},
1857 .first_sysupgrade_partition
= "os-image",
1858 .last_sysupgrade_partition
= "file-system"
1861 /** Firmware layout for the RE500 */
1867 "{product_name:RE500,product_ver:1.0.0,special_id:00000000}\r\n"
1868 "{product_name:RE500,product_ver:1.0.0,special_id:55530000}\r\n"
1869 "{product_name:RE500,product_ver:1.0.0,special_id:45550000}\r\n"
1870 "{product_name:RE500,product_ver:1.0.0,special_id:4A500000}\r\n"
1871 "{product_name:RE500,product_ver:1.0.0,special_id:43410000}\r\n"
1872 "{product_name:RE500,product_ver:1.0.0,special_id:41550000}\r\n"
1873 "{product_name:RE500,product_ver:1.0.0,special_id:41530000}\r\n",
1874 .support_trail
= '\x00',
1877 /* We're using a dynamic kernel/rootfs split here */
1879 {"fs-uboot", 0x00000, 0x20000},
1880 {"firmware", 0x20000, 0xde0000},
1881 {"partition-table", 0xe00000, 0x02000},
1882 {"default-mac", 0xe10000, 0x00020},
1883 {"pin", 0xe10100, 0x00020},
1884 {"product-info", 0xe11100, 0x01000},
1885 {"soft-version", 0xe20000, 0x01000},
1886 {"support-list", 0xe21000, 0x01000},
1887 {"profile", 0xe22000, 0x08000},
1888 {"user-config", 0xe30000, 0x10000},
1889 {"default-config", 0xe40000, 0x10000},
1890 {"radio", 0xff0000, 0x10000},
1894 .first_sysupgrade_partition
= "os-image",
1895 .last_sysupgrade_partition
= "file-system"
1898 /** Firmware layout for the RE650 */
1904 "{product_name:RE650,product_ver:1.0.0,special_id:00000000}\r\n"
1905 "{product_name:RE650,product_ver:1.0.0,special_id:55530000}\r\n"
1906 "{product_name:RE650,product_ver:1.0.0,special_id:45550000}\r\n"
1907 "{product_name:RE650,product_ver:1.0.0,special_id:4A500000}\r\n"
1908 "{product_name:RE650,product_ver:1.0.0,special_id:43410000}\r\n"
1909 "{product_name:RE650,product_ver:1.0.0,special_id:41550000}\r\n"
1910 "{product_name:RE650,product_ver:1.0.0,special_id:41530000}\r\n",
1911 .support_trail
= '\x00',
1914 /* We're using a dynamic kernel/rootfs split here */
1916 {"fs-uboot", 0x00000, 0x20000},
1917 {"firmware", 0x20000, 0xde0000},
1918 {"partition-table", 0xe00000, 0x02000},
1919 {"default-mac", 0xe10000, 0x00020},
1920 {"pin", 0xe10100, 0x00020},
1921 {"product-info", 0xe11100, 0x01000},
1922 {"soft-version", 0xe20000, 0x01000},
1923 {"support-list", 0xe21000, 0x01000},
1924 {"profile", 0xe22000, 0x08000},
1925 {"user-config", 0xe30000, 0x10000},
1926 {"default-config", 0xe40000, 0x10000},
1927 {"radio", 0xff0000, 0x10000},
1931 .first_sysupgrade_partition
= "os-image",
1932 .last_sysupgrade_partition
= "file-system"
1938 #define error(_ret, _errno, _str, ...) \
1940 fprintf(stderr, _str ": %s\n", ## __VA_ARGS__, \
1941 strerror(_errno)); \
1947 /** Stores a uint32 as big endian */
1948 static inline void put32(uint8_t *buf
, uint32_t val
) {
1955 /** Allocates a new image partition */
1956 static struct image_partition_entry
alloc_image_partition(const char *name
, size_t len
) {
1957 struct image_partition_entry entry
= {name
, len
, malloc(len
)};
1959 error(1, errno
, "malloc");
1964 /** Frees an image partition */
1965 static void free_image_partition(struct image_partition_entry entry
) {
1969 static time_t source_date_epoch
= -1;
1970 static void set_source_date_epoch() {
1971 char *env
= getenv("SOURCE_DATE_EPOCH");
1975 source_date_epoch
= strtoull(env
, &endptr
, 10);
1976 if (errno
|| (endptr
&& *endptr
!= '\0')) {
1977 fprintf(stderr
, "Invalid SOURCE_DATE_EPOCH");
1983 /** Generates the partition-table partition */
1984 static struct image_partition_entry
make_partition_table(const struct flash_partition_entry
*p
) {
1985 struct image_partition_entry entry
= alloc_image_partition("partition-table", 0x800);
1987 char *s
= (char *)entry
.data
, *end
= (char *)(s
+entry
.size
);
1995 for (i
= 0; p
[i
].name
; i
++) {
1997 size_t w
= snprintf(s
, len
, "partition %s base 0x%05x size 0x%05x\n", p
[i
].name
, p
[i
].base
, p
[i
].size
);
2000 error(1, 0, "flash partition table overflow?");
2007 memset(s
, 0xff, end
-s
);
2013 /** Generates a binary-coded decimal representation of an integer in the range [0, 99] */
2014 static inline uint8_t bcd(uint8_t v
) {
2015 return 0x10 * (v
/10) + v
%10;
2019 /** Generates the soft-version partition */
2020 static struct image_partition_entry
make_soft_version(uint32_t rev
) {
2021 struct image_partition_entry entry
= alloc_image_partition("soft-version", sizeof(struct soft_version
));
2022 struct soft_version
*s
= (struct soft_version
*)entry
.data
;
2026 if (source_date_epoch
!= -1)
2027 t
= source_date_epoch
;
2028 else if (time(&t
) == (time_t)(-1))
2029 error(1, errno
, "time");
2031 struct tm
*tm
= localtime(&t
);
2033 s
->magic
= htonl(0x0000000c);
2037 s
->version_major
= 0;
2038 s
->version_minor
= 0;
2039 s
->version_patch
= 0;
2041 s
->year_hi
= bcd((1900+tm
->tm_year
)/100);
2042 s
->year_lo
= bcd(tm
->tm_year
%100);
2043 s
->month
= bcd(tm
->tm_mon
+1);
2044 s
->day
= bcd(tm
->tm_mday
);
2045 s
->rev
= htonl(rev
);
2052 static struct image_partition_entry
make_soft_version_from_string(const char *soft_ver
) {
2053 /** String length _including_ the terminating zero byte */
2054 uint32_t ver_len
= strlen(soft_ver
) + 1;
2055 /** Partition contains 64 bit header, the version string, and one additional null byte */
2056 size_t partition_len
= 2*sizeof(uint32_t) + ver_len
+ 1;
2057 struct image_partition_entry entry
= alloc_image_partition("soft-version", partition_len
);
2059 uint32_t *len
= (uint32_t *)entry
.data
;
2060 len
[0] = htonl(ver_len
);
2062 memcpy(&len
[2], soft_ver
, ver_len
);
2064 entry
.data
[partition_len
- 1] = 0;
2069 /** Generates the support-list partition */
2070 static struct image_partition_entry
make_support_list(struct device_info
*info
) {
2071 size_t len
= strlen(info
->support_list
);
2072 struct image_partition_entry entry
= alloc_image_partition("support-list", len
+ 9);
2074 put32(entry
.data
, len
);
2075 memset(entry
.data
+4, 0, 4);
2076 memcpy(entry
.data
+8, info
->support_list
, len
);
2077 entry
.data
[len
+8] = info
->support_trail
;
2082 /** Creates a new image partition with an arbitrary name from a file */
2083 static struct image_partition_entry
read_file(const char *part_name
, const char *filename
, bool add_jffs2_eof
, struct flash_partition_entry
*file_system_partition
) {
2084 struct stat statbuf
;
2086 if (stat(filename
, &statbuf
) < 0)
2087 error(1, errno
, "unable to stat file `%s'", filename
);
2089 size_t len
= statbuf
.st_size
;
2091 if (add_jffs2_eof
) {
2092 if (file_system_partition
)
2093 len
= ALIGN(len
+ file_system_partition
->base
, 0x10000) + sizeof(jffs2_eof_mark
) - file_system_partition
->base
;
2095 len
= ALIGN(len
, 0x10000) + sizeof(jffs2_eof_mark
);
2098 struct image_partition_entry entry
= alloc_image_partition(part_name
, len
);
2100 FILE *file
= fopen(filename
, "rb");
2102 error(1, errno
, "unable to open file `%s'", filename
);
2104 if (fread(entry
.data
, statbuf
.st_size
, 1, file
) != 1)
2105 error(1, errno
, "unable to read file `%s'", filename
);
2107 if (add_jffs2_eof
) {
2108 uint8_t *eof
= entry
.data
+ statbuf
.st_size
, *end
= entry
.data
+entry
.size
;
2110 memset(eof
, 0xff, end
- eof
- sizeof(jffs2_eof_mark
));
2111 memcpy(end
- sizeof(jffs2_eof_mark
), jffs2_eof_mark
, sizeof(jffs2_eof_mark
));
2119 /** Creates a new image partition from arbitrary data */
2120 static struct image_partition_entry
put_data(const char *part_name
, const char *datain
, size_t len
) {
2122 struct image_partition_entry entry
= alloc_image_partition(part_name
, len
);
2124 memcpy(entry
.data
, datain
, len
);
2130 Copies a list of image partitions into an image buffer and generates the image partition table while doing so
2132 Example image partition table:
2134 fwup-ptn partition-table base 0x00800 size 0x00800
2135 fwup-ptn os-image base 0x01000 size 0x113b45
2136 fwup-ptn file-system base 0x114b45 size 0x1d0004
2137 fwup-ptn support-list base 0x2e4b49 size 0x000d1
2139 Each line of the partition table is terminated with the bytes 09 0d 0a ("\t\r\n"),
2140 the end of the partition table is marked with a zero byte.
2142 The firmware image must contain at least the partition-table and support-list partitions
2143 to be accepted. There aren't any alignment constraints for the image partitions.
2145 The partition-table partition contains the actual flash layout; partitions
2146 from the image partition table are mapped to the corresponding flash partitions during
2147 the firmware upgrade. The support-list partition contains a list of devices supported by
2150 The base offsets in the firmware partition table are relative to the end
2151 of the vendor information block, so the partition-table partition will
2152 actually start at offset 0x1814 of the image.
2154 I think partition-table must be the first partition in the firmware image.
2156 static void put_partitions(uint8_t *buffer
, const struct flash_partition_entry
*flash_parts
, const struct image_partition_entry
*parts
) {
2158 char *image_pt
= (char *)buffer
, *end
= image_pt
+ 0x800;
2160 size_t base
= 0x800;
2161 for (i
= 0; parts
[i
].name
; i
++) {
2162 for (j
= 0; flash_parts
[j
].name
; j
++) {
2163 if (!strcmp(flash_parts
[j
].name
, parts
[i
].name
)) {
2164 if (parts
[i
].size
> flash_parts
[j
].size
)
2165 error(1, 0, "%s partition too big (more than %u bytes)", flash_parts
[j
].name
, (unsigned)flash_parts
[j
].size
);
2170 assert(flash_parts
[j
].name
);
2172 memcpy(buffer
+ base
, parts
[i
].data
, parts
[i
].size
);
2174 size_t len
= end
-image_pt
;
2175 size_t w
= snprintf(image_pt
, len
, "fwup-ptn %s base 0x%05x size 0x%05x\t\r\n", parts
[i
].name
, (unsigned)base
, (unsigned)parts
[i
].size
);
2178 error(1, 0, "image partition table overflow?");
2182 base
+= parts
[i
].size
;
2186 /** Generates and writes the image MD5 checksum */
2187 static void put_md5(uint8_t *md5
, uint8_t *buffer
, unsigned int len
) {
2191 MD5_Update(&ctx
, md5_salt
, (unsigned int)sizeof(md5_salt
));
2192 MD5_Update(&ctx
, buffer
, len
);
2193 MD5_Final(md5
, &ctx
);
2198 Generates the firmware image in factory format
2204 0000-0003 Image size (4 bytes, big endian)
2205 0004-0013 MD5 hash (hash of a 16 byte salt and the image data starting with byte 0x14)
2206 0014-0017 Vendor information length (without padding) (4 bytes, big endian)
2207 0018-1013 Vendor information (4092 bytes, padded with 0xff; there seem to be older
2208 (VxWorks-based) TP-LINK devices which use a smaller vendor information block)
2209 1014-1813 Image partition table (2048 bytes, padded with 0xff)
2210 1814-xxxx Firmware partitions
2212 static void * generate_factory_image(struct device_info
*info
, const struct image_partition_entry
*parts
, size_t *len
) {
2216 for (i
= 0; parts
[i
].name
; i
++)
2217 *len
+= parts
[i
].size
;
2219 uint8_t *image
= malloc(*len
);
2221 error(1, errno
, "malloc");
2223 memset(image
, 0xff, *len
);
2227 size_t vendor_len
= strlen(info
->vendor
);
2228 put32(image
+0x14, vendor_len
);
2229 memcpy(image
+0x18, info
->vendor
, vendor_len
);
2232 put_partitions(image
+ 0x1014, info
->partitions
, parts
);
2233 put_md5(image
+0x04, image
+0x14, *len
-0x14);
2239 Generates the firmware image in sysupgrade format
2241 This makes some assumptions about the provided flash and image partition tables and
2242 should be generalized when TP-LINK starts building its safeloader into hardware with
2243 different flash layouts.
2245 static void * generate_sysupgrade_image(struct device_info
*info
, const struct image_partition_entry
*image_parts
, size_t *len
) {
2247 size_t flash_first_partition_index
= 0;
2248 size_t flash_last_partition_index
= 0;
2249 const struct flash_partition_entry
*flash_first_partition
= NULL
;
2250 const struct flash_partition_entry
*flash_last_partition
= NULL
;
2251 const struct image_partition_entry
*image_last_partition
= NULL
;
2253 /** Find first and last partitions */
2254 for (i
= 0; info
->partitions
[i
].name
; i
++) {
2255 if (!strcmp(info
->partitions
[i
].name
, info
->first_sysupgrade_partition
)) {
2256 flash_first_partition
= &info
->partitions
[i
];
2257 flash_first_partition_index
= i
;
2258 } else if (!strcmp(info
->partitions
[i
].name
, info
->last_sysupgrade_partition
)) {
2259 flash_last_partition
= &info
->partitions
[i
];
2260 flash_last_partition_index
= i
;
2264 assert(flash_first_partition
&& flash_last_partition
);
2265 assert(flash_first_partition_index
< flash_last_partition_index
);
2267 /** Find last partition from image to calculate needed size */
2268 for (i
= 0; image_parts
[i
].name
; i
++) {
2269 if (!strcmp(image_parts
[i
].name
, info
->last_sysupgrade_partition
)) {
2270 image_last_partition
= &image_parts
[i
];
2275 assert(image_last_partition
);
2277 *len
= flash_last_partition
->base
- flash_first_partition
->base
+ image_last_partition
->size
;
2279 uint8_t *image
= malloc(*len
);
2281 error(1, errno
, "malloc");
2283 memset(image
, 0xff, *len
);
2285 for (i
= flash_first_partition_index
; i
<= flash_last_partition_index
; i
++) {
2286 for (j
= 0; image_parts
[j
].name
; j
++) {
2287 if (!strcmp(info
->partitions
[i
].name
, image_parts
[j
].name
)) {
2288 if (image_parts
[j
].size
> info
->partitions
[i
].size
)
2289 error(1, 0, "%s partition too big (more than %u bytes)", info
->partitions
[i
].name
, (unsigned)info
->partitions
[i
].size
);
2290 memcpy(image
+ info
->partitions
[i
].base
- flash_first_partition
->base
, image_parts
[j
].data
, image_parts
[j
].size
);
2294 assert(image_parts
[j
].name
);
2301 /** Generates an image according to a given layout and writes it to a file */
2302 static void build_image(const char *output
,
2303 const char *kernel_image
,
2304 const char *rootfs_image
,
2308 struct device_info
*info
) {
2312 struct image_partition_entry parts
[7] = {};
2314 struct flash_partition_entry
*firmware_partition
= NULL
;
2315 struct flash_partition_entry
*os_image_partition
= NULL
;
2316 struct flash_partition_entry
*file_system_partition
= NULL
;
2317 size_t firmware_partition_index
= 0;
2319 for (i
= 0; info
->partitions
[i
].name
; i
++) {
2320 if (!strcmp(info
->partitions
[i
].name
, "firmware"))
2322 firmware_partition
= &info
->partitions
[i
];
2323 firmware_partition_index
= i
;
2327 if (firmware_partition
)
2329 os_image_partition
= &info
->partitions
[firmware_partition_index
];
2330 file_system_partition
= &info
->partitions
[firmware_partition_index
+ 1];
2333 if (stat(kernel_image
, &kernel
) < 0)
2334 error(1, errno
, "unable to stat file `%s'", kernel_image
);
2336 if (kernel
.st_size
> firmware_partition
->size
)
2337 error(1, 0, "kernel overflowed firmware partition\n");
2339 for (i
= MAX_PARTITIONS
-1; i
>= firmware_partition_index
+ 1; i
--)
2340 info
->partitions
[i
+1] = info
->partitions
[i
];
2342 file_system_partition
->name
= "file-system";
2343 file_system_partition
->base
= firmware_partition
->base
+ kernel
.st_size
;
2345 /* Align partition start to erase blocks for factory images only */
2347 file_system_partition
->base
= ALIGN(firmware_partition
->base
+ kernel
.st_size
, 0x10000);
2349 file_system_partition
->size
= firmware_partition
->size
- file_system_partition
->base
;
2351 os_image_partition
->name
= "os-image";
2352 os_image_partition
->size
= kernel
.st_size
;
2355 parts
[0] = make_partition_table(info
->partitions
);
2357 parts
[1] = make_soft_version_from_string(info
->soft_ver
);
2359 parts
[1] = make_soft_version(rev
);
2361 parts
[2] = make_support_list(info
);
2362 parts
[3] = read_file("os-image", kernel_image
, false, NULL
);
2363 parts
[4] = read_file("file-system", rootfs_image
, add_jffs2_eof
, file_system_partition
);
2365 /* Some devices need the extra-para partition to accept the firmware */
2366 if (strcasecmp(info
->id
, "ARCHER-C2-V3") == 0 ||
2367 strcasecmp(info
->id
, "ARCHER-C25-V1") == 0 ||
2368 strcasecmp(info
->id
, "ARCHER-C59-V2") == 0 ||
2369 strcasecmp(info
->id
, "ARCHER-C60-V2") == 0 ||
2370 strcasecmp(info
->id
, "ARCHER-C60-V3") == 0 ||
2371 strcasecmp(info
->id
, "TLWR1043NV5") == 0) {
2372 const char mdat
[11] = {0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00};
2373 parts
[5] = put_data("extra-para", mdat
, 11);
2374 } else if (strcasecmp(info
->id
, "ARCHER-A7-V5") == 0 || strcasecmp(info
->id
, "ARCHER-C7-V4") == 0 || strcasecmp(info
->id
, "ARCHER-C7-V5") == 0) {
2375 const char mdat
[11] = {0x01, 0x00, 0x00, 0x02, 0x00, 0x00, 0xca, 0x00, 0x01, 0x00, 0x00};
2376 parts
[5] = put_data("extra-para", mdat
, 11);
2377 } else if (strcasecmp(info
->id
, "ARCHER-C6-V2") == 0) {
2378 const char mdat
[11] = {0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00};
2379 parts
[5] = put_data("extra-para", mdat
, 11);
2380 } else if (strcasecmp(info
->id
, "ARCHER-C6-V2-US") == 0) {
2381 const char mdat
[11] = {0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x00};
2382 parts
[5] = put_data("extra-para", mdat
, 11);
2388 image
= generate_sysupgrade_image(info
, parts
, &len
);
2390 image
= generate_factory_image(info
, parts
, &len
);
2392 FILE *file
= fopen(output
, "wb");
2394 error(1, errno
, "unable to open output file");
2396 if (fwrite(image
, len
, 1, file
) != 1)
2397 error(1, 0, "unable to write output file");
2403 for (i
= 0; parts
[i
].name
; i
++)
2404 free_image_partition(parts
[i
]);
2408 static void usage(const char *argv0
) {
2410 "Usage: %s [OPTIONS...]\n"
2413 " -h show this help\n"
2415 "Create a new image:\n"
2416 " -B <board> create image for the board specified with <board>\n"
2417 " -k <file> read kernel image from the file <file>\n"
2418 " -r <file> read rootfs image from the file <file>\n"
2419 " -o <file> write output to the file <file>\n"
2420 " -V <rev> sets the revision number to <rev>\n"
2421 " -j add jffs2 end-of-filesystem markers\n"
2422 " -S create sysupgrade instead of factory image\n"
2423 "Extract an old image:\n"
2424 " -x <file> extract all oem firmware partition\n"
2425 " -d <dir> destination to extract the firmware partition\n"
2426 " -z <file> convert an oem firmware into a sysupgade file. Use -o for output file\n",
2432 static struct device_info
*find_board(const char *id
)
2434 struct device_info
*board
= NULL
;
2436 for (board
= boards
; board
->id
!= NULL
; board
++)
2437 if (strcasecmp(id
, board
->id
) == 0)
2443 static int add_flash_partition(
2444 struct flash_partition_entry
*part_list
,
2451 /* check if the list has a free entry */
2452 for (ptr
= 0; ptr
< max_entries
; ptr
++, part_list
++) {
2453 if (part_list
->name
== NULL
&&
2454 part_list
->base
== 0 &&
2455 part_list
->size
== 0)
2459 if (ptr
== max_entries
) {
2460 error(1, 0, "No free flash part entry available.");
2463 part_list
->name
= calloc(1, strlen(name
) + 1);
2464 if (!part_list
->name
) {
2465 error(1, 0, "Unable to allocate memory");
2468 memcpy((char *)part_list
->name
, name
, strlen(name
));
2469 part_list
->base
= base
;
2470 part_list
->size
= size
;
2475 /** read the partition table into struct flash_partition_entry */
2476 static int read_partition_table(
2477 FILE *file
, long offset
,
2478 struct flash_partition_entry
*entries
, size_t max_entries
,
2483 const char *parthdr
= NULL
;
2484 const char *fwuphdr
= "fwup-ptn";
2485 const char *flashhdr
= "partition";
2487 /* TODO: search for the partition table */
2497 error(1, 0, "Invalid partition table");
2500 if (fseek(file
, offset
, SEEK_SET
) < 0)
2501 error(1, errno
, "Can not seek in the firmware");
2503 if (fread(buf
, 2048, 1, file
) != 1)
2504 error(1, errno
, "Can not read fwup-ptn from the firmware");
2508 /* look for the partition header */
2509 if (memcmp(buf
, parthdr
, strlen(parthdr
)) != 0) {
2510 fprintf(stderr
, "DEBUG: can not find fwuphdr\n");
2515 end
= buf
+ sizeof(buf
);
2516 while ((ptr
+ strlen(parthdr
)) < end
&&
2517 memcmp(ptr
, parthdr
, strlen(parthdr
)) == 0) {
2521 char name
[32] = { 0 };
2523 unsigned long base
= 0;
2524 unsigned long size
= 0;
2526 end_part
= memchr(ptr
, '\n', (end
- ptr
));
2527 if (end_part
== NULL
) {
2528 /* in theory this should never happen, because a partition always ends with 0x09, 0x0D, 0x0A */
2532 for (int i
= 0; i
<= 4; i
++) {
2533 if (end_part
<= ptr
)
2536 end_element
= memchr(ptr
, 0x20, (end_part
- ptr
));
2537 if (end_element
== NULL
) {
2538 error(1, errno
, "Ignoring the rest of the partition entries.");
2543 /* partition header */
2545 ptr
= end_element
+ 1;
2549 name_len
= (end_element
- ptr
) > 31 ? 31 : (end_element
- ptr
);
2550 strncpy(name
, ptr
, name_len
);
2551 name
[name_len
] = '\0';
2552 ptr
= end_element
+ 1;
2557 ptr
= end_element
+ 1;
2562 base
= strtoul(ptr
, NULL
, 16);
2563 ptr
= end_element
+ 1;
2568 ptr
= end_element
+ 1;
2569 /* actual size. The last element doesn't have a sepeartor */
2570 size
= strtoul(ptr
, NULL
, 16);
2571 /* the part ends with 0x09, 0x0d, 0x0a */
2573 add_flash_partition(entries
, max_entries
, name
, base
, size
);
2582 static void write_partition(
2584 size_t firmware_offset
,
2585 struct flash_partition_entry
*entry
,
2591 fseek(input_file
, entry
->base
+ firmware_offset
, SEEK_SET
);
2593 for (offset
= 0; sizeof(buf
) + offset
<= entry
->size
; offset
+= sizeof(buf
)) {
2594 if (fread(buf
, sizeof(buf
), 1, input_file
) != 1)
2595 error(1, errno
, "Can not read partition from input_file");
2597 if (fwrite(buf
, sizeof(buf
), 1, output_file
) != 1)
2598 error(1, errno
, "Can not write partition to output_file");
2600 /* write last chunk smaller than buffer */
2601 if (offset
< entry
->size
) {
2602 offset
= entry
->size
- offset
;
2603 if (fread(buf
, offset
, 1, input_file
) != 1)
2604 error(1, errno
, "Can not read partition from input_file");
2605 if (fwrite(buf
, offset
, 1, output_file
) != 1)
2606 error(1, errno
, "Can not write partition to output_file");
2610 static int extract_firmware_partition(FILE *input_file
, size_t firmware_offset
, struct flash_partition_entry
*entry
, const char *output_directory
)
2613 char output
[PATH_MAX
];
2615 snprintf(output
, PATH_MAX
, "%s/%s", output_directory
, entry
->name
);
2616 output_file
= fopen(output
, "wb+");
2617 if (output_file
== NULL
) {
2618 error(1, errno
, "Can not open output file %s", output
);
2621 write_partition(input_file
, firmware_offset
, entry
, output_file
);
2623 fclose(output_file
);
2628 /** extract all partitions from the firmware file */
2629 static int extract_firmware(const char *input
, const char *output_directory
)
2631 struct flash_partition_entry entries
[16] = { 0 };
2632 size_t max_entries
= 16;
2633 size_t firmware_offset
= 0x1014;
2636 struct stat statbuf
;
2638 /* check input file */
2639 if (stat(input
, &statbuf
)) {
2640 error(1, errno
, "Can not read input firmware %s", input
);
2643 /* check if output directory exists */
2644 if (stat(output_directory
, &statbuf
)) {
2645 error(1, errno
, "Failed to stat output directory %s", output_directory
);
2648 if ((statbuf
.st_mode
& S_IFMT
) != S_IFDIR
) {
2649 error(1, errno
, "Given output directory is not a directory %s", output_directory
);
2652 input_file
= fopen(input
, "rb");
2654 if (read_partition_table(input_file
, firmware_offset
, entries
, 16, 0) != 0) {
2655 error(1, 0, "Error can not read the partition table (fwup-ptn)");
2658 for (size_t i
= 0; i
< max_entries
; i
++) {
2659 if (entries
[i
].name
== NULL
&&
2660 entries
[i
].base
== 0 &&
2661 entries
[i
].size
== 0)
2664 extract_firmware_partition(input_file
, firmware_offset
, &entries
[i
], output_directory
);
2670 static struct flash_partition_entry
*find_partition(
2671 struct flash_partition_entry
*entries
, size_t max_entries
,
2672 const char *name
, const char *error_msg
)
2674 for (size_t i
= 0; i
< max_entries
; i
++, entries
++) {
2675 if (strcmp(entries
->name
, name
) == 0)
2679 error(1, 0, "%s", error_msg
);
2683 static void write_ff(FILE *output_file
, size_t size
)
2688 memset(buf
, 0xff, sizeof(buf
));
2690 for (offset
= 0; offset
+ sizeof(buf
) < size
; offset
+= sizeof(buf
)) {
2691 if (fwrite(buf
, sizeof(buf
), 1, output_file
) != 1)
2692 error(1, errno
, "Can not write 0xff to output_file");
2695 /* write last chunk smaller than buffer */
2696 if (offset
< size
) {
2697 offset
= size
- offset
;
2698 if (fwrite(buf
, offset
, 1, output_file
) != 1)
2699 error(1, errno
, "Can not write partition to output_file");
2703 static void convert_firmware(const char *input
, const char *output
)
2705 struct flash_partition_entry fwup
[MAX_PARTITIONS
] = { 0 };
2706 struct flash_partition_entry flash
[MAX_PARTITIONS
] = { 0 };
2707 struct flash_partition_entry
*fwup_os_image
= NULL
, *fwup_file_system
= NULL
;
2708 struct flash_partition_entry
*flash_os_image
= NULL
, *flash_file_system
= NULL
;
2709 struct flash_partition_entry
*fwup_partition_table
= NULL
;
2710 size_t firmware_offset
= 0x1014;
2711 FILE *input_file
, *output_file
;
2713 struct stat statbuf
;
2715 /* check input file */
2716 if (stat(input
, &statbuf
)) {
2717 error(1, errno
, "Can not read input firmware %s", input
);
2720 input_file
= fopen(input
, "rb");
2722 error(1, 0, "Can not open input firmware %s", input
);
2724 output_file
= fopen(output
, "wb");
2726 error(1, 0, "Can not open output firmware %s", output
);
2728 if (read_partition_table(input_file
, firmware_offset
, fwup
, MAX_PARTITIONS
, 0) != 0) {
2729 error(1, 0, "Error can not read the partition table (fwup-ptn)");
2732 fwup_os_image
= find_partition(fwup
, MAX_PARTITIONS
,
2733 "os-image", "Error can not find os-image partition (fwup)");
2734 fwup_file_system
= find_partition(fwup
, MAX_PARTITIONS
,
2735 "file-system", "Error can not find file-system partition (fwup)");
2736 fwup_partition_table
= find_partition(fwup
, MAX_PARTITIONS
,
2737 "partition-table", "Error can not find partition-table partition");
2739 /* the flash partition table has a 0x00000004 magic haeder */
2740 if (read_partition_table(input_file
, firmware_offset
+ fwup_partition_table
->base
+ 4, flash
, MAX_PARTITIONS
, 1) != 0)
2741 error(1, 0, "Error can not read the partition table (flash)");
2743 flash_os_image
= find_partition(flash
, MAX_PARTITIONS
,
2744 "os-image", "Error can not find os-image partition (flash)");
2745 flash_file_system
= find_partition(flash
, MAX_PARTITIONS
,
2746 "file-system", "Error can not find file-system partition (flash)");
2748 /* write os_image to 0x0 */
2749 write_partition(input_file
, firmware_offset
, fwup_os_image
, output_file
);
2750 write_ff(output_file
, flash_os_image
->size
- fwup_os_image
->size
);
2752 /* write file-system behind os_image */
2753 fseek(output_file
, flash_file_system
->base
- flash_os_image
->base
, SEEK_SET
);
2754 write_partition(input_file
, firmware_offset
, fwup_file_system
, output_file
);
2755 write_ff(output_file
, flash_file_system
->size
- fwup_file_system
->size
);
2757 fclose(output_file
);
2761 int main(int argc
, char *argv
[]) {
2762 const char *board
= NULL
, *kernel_image
= NULL
, *rootfs_image
= NULL
, *output
= NULL
;
2763 const char *extract_image
= NULL
, *output_directory
= NULL
, *convert_image
= NULL
;
2764 bool add_jffs2_eof
= false, sysupgrade
= false;
2766 struct device_info
*info
;
2767 set_source_date_epoch();
2772 c
= getopt(argc
, argv
, "B:k:r:o:V:jSh:x:d:z:");
2782 kernel_image
= optarg
;
2786 rootfs_image
= optarg
;
2794 sscanf(optarg
, "r%u", &rev
);
2798 add_jffs2_eof
= true;
2810 output_directory
= optarg
;
2814 extract_image
= optarg
;
2818 convert_image
= optarg
;
2827 if (extract_image
|| output_directory
) {
2829 error(1, 0, "No factory/oem image given via -x <file>. Output directory is only valid with -x");
2830 if (!output_directory
)
2831 error(1, 0, "Can not extract an image without output directory. Use -d <dir>");
2832 extract_firmware(extract_image
, output_directory
);
2833 } else if (convert_image
) {
2835 error(1, 0, "Can not convert a factory/oem image into sysupgrade image without output file. Use -o <file>");
2836 convert_firmware(convert_image
, output
);
2839 error(1, 0, "no board has been specified");
2841 error(1, 0, "no kernel image has been specified");
2843 error(1, 0, "no rootfs image has been specified");
2845 error(1, 0, "no output filename has been specified");
2847 info
= find_board(board
);
2850 error(1, 0, "unsupported board %s", board
);
2852 build_image(output
, kernel_image
, rootfs_image
, rev
, add_jffs2_eof
, sysupgrade
, info
);