2 Copyright (c) 2014, Matthias Schiffer <mschiffer@universe-factory.net>
5 Redistribution and use in source and binary forms, with or without
6 modification, are permitted provided that the following conditions are met:
8 1. Redistributions of source code must retain the above copyright notice,
9 this list of conditions and the following disclaimer.
10 2. Redistributions in binary form must reproduce the above copyright notice,
11 this list of conditions and the following disclaimer in the documentation
12 and/or other materials provided with the distribution.
14 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
15 AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16 IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
17 DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
18 FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19 DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
20 SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
21 CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
22 OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
23 OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
30 Image generation tool for the TP-LINK SafeLoader as seen on
31 TP-LINK Pharos devices (CPE210/220/510/520)
45 #include <arpa/inet.h>
47 #include <sys/types.h>
54 #define ALIGN(x,a) ({ typeof(a) __a = (a); (((x) + __a - 1) & ~(__a - 1)); })
57 #define MAX_PARTITIONS 32
59 /** An image partition table entry */
60 struct image_partition_entry
{
66 /** A flash partition table entry */
67 struct flash_partition_entry
{
73 /** Partition trailing padding definitions
74 * Values 0x00 to 0xff are reserved to indicate the padding value
75 * Values from 0x100 are reserved to indicate other behaviour */
76 enum partition_trail_value
{
79 PART_TRAIL_MAX
= 0xff,
80 PART_TRAIL_NONE
= 0x100
83 /** Firmware layout description */
87 const char *support_list
;
88 enum partition_trail_value part_trail
;
90 uint32_t soft_ver_compat_level
;
91 struct flash_partition_entry partitions
[MAX_PARTITIONS
+1];
92 const char *first_sysupgrade_partition
;
93 const char *last_sysupgrade_partition
;
96 struct __attribute__((__packed__
)) meta_header
{
101 /** The content of the soft-version structure */
102 struct __attribute__((__packed__
)) soft_version
{
104 uint8_t version_major
;
105 uint8_t version_minor
;
106 uint8_t version_patch
;
112 uint32_t compat_level
;
116 static const uint8_t jffs2_eof_mark
[4] = {0xde, 0xad, 0xc0, 0xde};
120 Salt for the MD5 hash
122 Fortunately, TP-LINK seems to use the same salt for most devices which use
123 the new image format.
125 static const uint8_t md5_salt
[16] = {
126 0x7a, 0x2b, 0x15, 0xed,
127 0x9b, 0x98, 0x59, 0x6d,
128 0xe5, 0x04, 0xab, 0x44,
129 0xac, 0x2a, 0x9f, 0x4e,
133 /** Firmware layout table */
134 static struct device_info boards
[] = {
135 /** Firmware layout for the CPE210/220 V1 */
138 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
141 "CPE210(TP-LINK|UN|N300-2):1.0\r\n"
142 "CPE210(TP-LINK|UN|N300-2):1.1\r\n"
143 "CPE210(TP-LINK|US|N300-2):1.1\r\n"
144 "CPE210(TP-LINK|EU|N300-2):1.1\r\n"
145 "CPE220(TP-LINK|UN|N300-2):1.1\r\n"
146 "CPE220(TP-LINK|US|N300-2):1.1\r\n"
147 "CPE220(TP-LINK|EU|N300-2):1.1\r\n",
152 {"fs-uboot", 0x00000, 0x20000},
153 {"partition-table", 0x20000, 0x02000},
154 {"default-mac", 0x30000, 0x00020},
155 {"product-info", 0x31100, 0x00100},
156 {"signature", 0x32000, 0x00400},
157 {"os-image", 0x40000, 0x300000},
158 {"file-system", 0x340000, 0x470000},
159 {"soft-version", 0x7b0000, 0x00100},
160 {"support-list", 0x7b1000, 0x00400},
161 {"user-config", 0x7c0000, 0x10000},
162 {"default-config", 0x7d0000, 0x10000},
163 {"log", 0x7e0000, 0x10000},
164 {"radio", 0x7f0000, 0x10000},
168 .first_sysupgrade_partition
= "os-image",
169 .last_sysupgrade_partition
= "support-list",
172 /** Firmware layout for the CPE210 V2 */
175 .vendor
= "CPE210(TP-LINK|UN|N300-2|00000000):2.0\r\n",
178 "CPE210(TP-LINK|EU|N300-2|00000000):2.0\r\n"
179 "CPE210(TP-LINK|EU|N300-2|45550000):2.0\r\n"
180 "CPE210(TP-LINK|EU|N300-2|55530000):2.0\r\n"
181 "CPE210(TP-LINK|UN|N300-2|00000000):2.0\r\n"
182 "CPE210(TP-LINK|UN|N300-2|45550000):2.0\r\n"
183 "CPE210(TP-LINK|UN|N300-2|55530000):2.0\r\n"
184 "CPE210(TP-LINK|US|N300-2|55530000):2.0\r\n"
185 "CPE210(TP-LINK|UN|N300-2):2.0\r\n"
186 "CPE210(TP-LINK|EU|N300-2):2.0\r\n"
187 "CPE210(TP-LINK|US|N300-2):2.0\r\n",
192 {"fs-uboot", 0x00000, 0x20000},
193 {"partition-table", 0x20000, 0x02000},
194 {"default-mac", 0x30000, 0x00020},
195 {"product-info", 0x31100, 0x00100},
196 {"device-info", 0x31400, 0x00400},
197 {"signature", 0x32000, 0x00400},
198 {"device-id", 0x33000, 0x00100},
199 {"firmware", 0x40000, 0x770000},
200 {"soft-version", 0x7b0000, 0x00100},
201 {"support-list", 0x7b1000, 0x01000},
202 {"user-config", 0x7c0000, 0x10000},
203 {"default-config", 0x7d0000, 0x10000},
204 {"log", 0x7e0000, 0x10000},
205 {"radio", 0x7f0000, 0x10000},
209 .first_sysupgrade_partition
= "os-image",
210 .last_sysupgrade_partition
= "support-list",
213 /** Firmware layout for the CPE210 V3 */
216 .vendor
= "CPE210(TP-LINK|UN|N300-2|00000000):3.0\r\n",
219 "CPE210(TP-LINK|EU|N300-2|45550000):3.0\r\n"
220 "CPE210(TP-LINK|UN|N300-2|00000000):3.0\r\n"
221 "CPE210(TP-LINK|US|N300-2|55530000):3.0\r\n"
222 "CPE210(TP-LINK|UN|N300-2):3.0\r\n"
223 "CPE210(TP-LINK|EU|N300-2):3.0\r\n"
224 "CPE210(TP-LINK|EU|N300-2|45550000):3.1\r\n"
225 "CPE210(TP-LINK|UN|N300-2|00000000):3.1\r\n"
226 "CPE210(TP-LINK|US|N300-2|55530000):3.1\r\n"
227 "CPE210(TP-LINK|EU|N300-2|45550000):3.20\r\n"
228 "CPE210(TP-LINK|UN|N300-2|00000000):3.20\r\n"
229 "CPE210(TP-LINK|US|N300-2|55530000):3.20\r\n",
234 {"fs-uboot", 0x00000, 0x20000},
235 {"partition-table", 0x20000, 0x01000},
236 {"default-mac", 0x30000, 0x00020},
237 {"product-info", 0x31100, 0x00100},
238 {"device-info", 0x31400, 0x00400},
239 {"signature", 0x32000, 0x00400},
240 {"device-id", 0x33000, 0x00100},
241 {"firmware", 0x40000, 0x770000},
242 {"soft-version", 0x7b0000, 0x00100},
243 {"support-list", 0x7b1000, 0x01000},
244 {"user-config", 0x7c0000, 0x10000},
245 {"default-config", 0x7d0000, 0x10000},
246 {"log", 0x7e0000, 0x10000},
247 {"radio", 0x7f0000, 0x10000},
251 .first_sysupgrade_partition
= "os-image",
252 .last_sysupgrade_partition
= "support-list",
255 /** Firmware layout for the CPE220 V2 */
258 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
261 "CPE220(TP-LINK|EU|N300-2|00000000):2.0\r\n"
262 "CPE220(TP-LINK|EU|N300-2|45550000):2.0\r\n"
263 "CPE220(TP-LINK|EU|N300-2|55530000):2.0\r\n"
264 "CPE220(TP-LINK|UN|N300-2|00000000):2.0\r\n"
265 "CPE220(TP-LINK|UN|N300-2|45550000):2.0\r\n"
266 "CPE220(TP-LINK|UN|N300-2|55530000):2.0\r\n"
267 "CPE220(TP-LINK|US|N300-2|55530000):2.0\r\n"
268 "CPE220(TP-LINK|UN|N300-2):2.0\r\n"
269 "CPE220(TP-LINK|EU|N300-2):2.0\r\n"
270 "CPE220(TP-LINK|US|N300-2):2.0\r\n",
275 {"fs-uboot", 0x00000, 0x20000},
276 {"partition-table", 0x20000, 0x02000},
277 {"default-mac", 0x30000, 0x00020},
278 {"product-info", 0x31100, 0x00100},
279 {"signature", 0x32000, 0x00400},
280 {"os-image", 0x40000, 0x300000},
281 {"file-system", 0x340000, 0x470000},
282 {"soft-version", 0x7b0000, 0x00100},
283 {"support-list", 0x7b1000, 0x00400},
284 {"user-config", 0x7c0000, 0x10000},
285 {"default-config", 0x7d0000, 0x10000},
286 {"log", 0x7e0000, 0x10000},
287 {"radio", 0x7f0000, 0x10000},
291 .first_sysupgrade_partition
= "os-image",
292 .last_sysupgrade_partition
= "support-list",
295 /** Firmware layout for the CPE220 V3 */
298 .vendor
= "CPE220(TP-LINK|UN|N300-2|00000000):3.0\r\n",
301 "CPE220(TP-LINK|EU|N300-2|00000000):3.0\r\n"
302 "CPE220(TP-LINK|EU|N300-2|45550000):3.0\r\n"
303 "CPE220(TP-LINK|EU|N300-2|55530000):3.0\r\n"
304 "CPE220(TP-LINK|UN|N300-2|00000000):3.0\r\n"
305 "CPE220(TP-LINK|UN|N300-2|45550000):3.0\r\n"
306 "CPE220(TP-LINK|UN|N300-2|55530000):3.0\r\n"
307 "CPE220(TP-LINK|US|N300-2|55530000):3.0\r\n"
308 "CPE220(TP-LINK|UN|N300-2):3.0\r\n"
309 "CPE220(TP-LINK|EU|N300-2):3.0\r\n"
310 "CPE220(TP-LINK|US|N300-2):3.0\r\n",
315 {"fs-uboot", 0x00000, 0x20000},
316 {"partition-table", 0x20000, 0x02000},
317 {"default-mac", 0x30000, 0x00020},
318 {"product-info", 0x31100, 0x00100},
319 {"device-info", 0x31400, 0x00400},
320 {"signature", 0x32000, 0x00400},
321 {"device-id", 0x33000, 0x00100},
322 {"firmware", 0x40000, 0x770000},
323 {"soft-version", 0x7b0000, 0x00100},
324 {"support-list", 0x7b1000, 0x01000},
325 {"user-config", 0x7c0000, 0x10000},
326 {"default-config", 0x7d0000, 0x10000},
327 {"log", 0x7e0000, 0x10000},
328 {"radio", 0x7f0000, 0x10000},
332 .first_sysupgrade_partition
= "os-image",
333 .last_sysupgrade_partition
= "support-list",
336 /** Firmware layout for the CPE510/520 V1 */
339 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
342 "CPE510(TP-LINK|UN|N300-5):1.0\r\n"
343 "CPE510(TP-LINK|UN|N300-5):1.1\r\n"
344 "CPE510(TP-LINK|UN|N300-5):1.1\r\n"
345 "CPE510(TP-LINK|US|N300-5):1.1\r\n"
346 "CPE510(TP-LINK|EU|N300-5):1.1\r\n"
347 "CPE520(TP-LINK|UN|N300-5):1.1\r\n"
348 "CPE520(TP-LINK|US|N300-5):1.1\r\n"
349 "CPE520(TP-LINK|EU|N300-5):1.1\r\n",
354 {"fs-uboot", 0x00000, 0x20000},
355 {"partition-table", 0x20000, 0x02000},
356 {"default-mac", 0x30000, 0x00020},
357 {"product-info", 0x31100, 0x00100},
358 {"signature", 0x32000, 0x00400},
359 {"os-image", 0x40000, 0x300000},
360 {"file-system", 0x340000, 0x470000},
361 {"soft-version", 0x7b0000, 0x00100},
362 {"support-list", 0x7b1000, 0x00400},
363 {"user-config", 0x7c0000, 0x10000},
364 {"default-config", 0x7d0000, 0x10000},
365 {"log", 0x7e0000, 0x10000},
366 {"radio", 0x7f0000, 0x10000},
370 .first_sysupgrade_partition
= "os-image",
371 .last_sysupgrade_partition
= "support-list",
374 /** Firmware layout for the CPE510 V2 */
377 .vendor
= "CPE510(TP-LINK|UN|N300-5):2.0\r\n",
380 "CPE510(TP-LINK|EU|N300-5|00000000):2.0\r\n"
381 "CPE510(TP-LINK|EU|N300-5|45550000):2.0\r\n"
382 "CPE510(TP-LINK|EU|N300-5|55530000):2.0\r\n"
383 "CPE510(TP-LINK|UN|N300-5|00000000):2.0\r\n"
384 "CPE510(TP-LINK|UN|N300-5|45550000):2.0\r\n"
385 "CPE510(TP-LINK|UN|N300-5|55530000):2.0\r\n"
386 "CPE510(TP-LINK|US|N300-5|00000000):2.0\r\n"
387 "CPE510(TP-LINK|US|N300-5|45550000):2.0\r\n"
388 "CPE510(TP-LINK|US|N300-5|55530000):2.0\r\n"
389 "CPE510(TP-LINK|UN|N300-5):2.0\r\n"
390 "CPE510(TP-LINK|EU|N300-5):2.0\r\n"
391 "CPE510(TP-LINK|US|N300-5):2.0\r\n",
396 {"fs-uboot", 0x00000, 0x20000},
397 {"partition-table", 0x20000, 0x02000},
398 {"default-mac", 0x30000, 0x00020},
399 {"product-info", 0x31100, 0x00100},
400 {"signature", 0x32000, 0x00400},
401 {"os-image", 0x40000, 0x300000},
402 {"file-system", 0x340000, 0x470000},
403 {"soft-version", 0x7b0000, 0x00100},
404 {"support-list", 0x7b1000, 0x00400},
405 {"user-config", 0x7c0000, 0x10000},
406 {"default-config", 0x7d0000, 0x10000},
407 {"log", 0x7e0000, 0x10000},
408 {"radio", 0x7f0000, 0x10000},
412 .first_sysupgrade_partition
= "os-image",
413 .last_sysupgrade_partition
= "support-list",
416 /** Firmware layout for the CPE510 V3 */
419 .vendor
= "CPE510(TP-LINK|UN|N300-5):3.0\r\n",
422 "CPE510(TP-LINK|EU|N300-5|00000000):3.0\r\n"
423 "CPE510(TP-LINK|EU|N300-5|45550000):3.0\r\n"
424 "CPE510(TP-LINK|EU|N300-5|55530000):3.0\r\n"
425 "CPE510(TP-LINK|UN|N300-5|00000000):3.0\r\n"
426 "CPE510(TP-LINK|UN|N300-5|45550000):3.0\r\n"
427 "CPE510(TP-LINK|UN|N300-5|55530000):3.0\r\n"
428 "CPE510(TP-LINK|US|N300-5|00000000):3.0\r\n"
429 "CPE510(TP-LINK|US|N300-5|45550000):3.0\r\n"
430 "CPE510(TP-LINK|US|N300-5|55530000):3.0\r\n"
431 "CPE510(TP-LINK|UN|N300-5):3.0\r\n"
432 "CPE510(TP-LINK|EU|N300-5):3.0\r\n"
433 "CPE510(TP-LINK|US|N300-5):3.0\r\n"
434 "CPE510(TP-LINK|UN|N300-5|00000000):3.20\r\n"
435 "CPE510(TP-LINK|US|N300-5|55530000):3.20\r\n"
436 "CPE510(TP-LINK|EU|N300-5|45550000):3.20\r\n",
441 {"fs-uboot", 0x00000, 0x20000},
442 {"partition-table", 0x20000, 0x02000},
443 {"default-mac", 0x30000, 0x00020},
444 {"product-info", 0x31100, 0x00100},
445 {"signature", 0x32000, 0x00400},
446 {"os-image", 0x40000, 0x300000},
447 {"file-system", 0x340000, 0x470000},
448 {"soft-version", 0x7b0000, 0x00100},
449 {"support-list", 0x7b1000, 0x00400},
450 {"user-config", 0x7c0000, 0x10000},
451 {"default-config", 0x7d0000, 0x10000},
452 {"log", 0x7e0000, 0x10000},
453 {"radio", 0x7f0000, 0x10000},
457 .first_sysupgrade_partition
= "os-image",
458 .last_sysupgrade_partition
= "support-list",
461 /** Firmware layout for the CPE610V1 */
464 .vendor
= "CPE610(TP-LINK|UN|N300-5|00000000):1.0\r\n",
467 "CPE610(TP-LINK|EU|N300-5|00000000):1.0\r\n"
468 "CPE610(TP-LINK|EU|N300-5|45550000):1.0\r\n"
469 "CPE610(TP-LINK|EU|N300-5|55530000):1.0\r\n"
470 "CPE610(TP-LINK|UN|N300-5|00000000):1.0\r\n"
471 "CPE610(TP-LINK|UN|N300-5|45550000):1.0\r\n"
472 "CPE610(TP-LINK|UN|N300-5|55530000):1.0\r\n"
473 "CPE610(TP-LINK|US|N300-5|55530000):1.0\r\n"
474 "CPE610(TP-LINK|UN|N300-5):1.0\r\n"
475 "CPE610(TP-LINK|EU|N300-5):1.0\r\n"
476 "CPE610(TP-LINK|US|N300-5):1.0\r\n",
481 {"fs-uboot", 0x00000, 0x20000},
482 {"partition-table", 0x20000, 0x02000},
483 {"default-mac", 0x30000, 0x00020},
484 {"product-info", 0x31100, 0x00100},
485 {"signature", 0x32000, 0x00400},
486 {"os-image", 0x40000, 0x300000},
487 {"file-system", 0x340000, 0x470000},
488 {"soft-version", 0x7b0000, 0x00100},
489 {"support-list", 0x7b1000, 0x00400},
490 {"user-config", 0x7c0000, 0x10000},
491 {"default-config", 0x7d0000, 0x10000},
492 {"log", 0x7e0000, 0x10000},
493 {"radio", 0x7f0000, 0x10000},
497 .first_sysupgrade_partition
= "os-image",
498 .last_sysupgrade_partition
= "support-list",
501 /** Firmware layout for the CPE610V2 */
504 .vendor
= "CPE610(TP-LINK|UN|N300-5|00000000):2.0\r\n",
507 "CPE610(TP-LINK|EU|N300-5|00000000):2.0\r\n"
508 "CPE610(TP-LINK|EU|N300-5|45550000):2.0\r\n"
509 "CPE610(TP-LINK|EU|N300-5|55530000):2.0\r\n"
510 "CPE610(TP-LINK|UN|N300-5|00000000):2.0\r\n"
511 "CPE610(TP-LINK|UN|N300-5|45550000):2.0\r\n"
512 "CPE610(TP-LINK|UN|N300-5|55530000):2.0\r\n"
513 "CPE610(TP-LINK|US|N300-5|55530000):2.0\r\n"
514 "CPE610(TP-LINK|UN|N300-5):2.0\r\n"
515 "CPE610(TP-LINK|EU|N300-5):2.0\r\n"
516 "CPE610(TP-LINK|US|N300-5):2.0\r\n",
521 {"fs-uboot", 0x00000, 0x20000},
522 {"partition-table", 0x20000, 0x02000},
523 {"default-mac", 0x30000, 0x00020},
524 {"product-info", 0x31100, 0x00100},
525 {"signature", 0x32000, 0x00400},
526 {"os-image", 0x40000, 0x300000},
527 {"file-system", 0x340000, 0x470000},
528 {"soft-version", 0x7b0000, 0x00100},
529 {"support-list", 0x7b1000, 0x00400},
530 {"user-config", 0x7c0000, 0x10000},
531 {"default-config", 0x7d0000, 0x10000},
532 {"log", 0x7e0000, 0x10000},
533 {"radio", 0x7f0000, 0x10000},
537 .first_sysupgrade_partition
= "os-image",
538 .last_sysupgrade_partition
= "support-list",
543 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
546 "WBS210(TP-LINK|UN|N300-2):1.20\r\n"
547 "WBS210(TP-LINK|US|N300-2):1.20\r\n"
548 "WBS210(TP-LINK|EU|N300-2):1.20\r\n",
553 {"fs-uboot", 0x00000, 0x20000},
554 {"partition-table", 0x20000, 0x02000},
555 {"default-mac", 0x30000, 0x00020},
556 {"product-info", 0x31100, 0x00100},
557 {"signature", 0x32000, 0x00400},
558 {"os-image", 0x40000, 0x300000},
559 {"file-system", 0x340000, 0x470000},
560 {"soft-version", 0x7b0000, 0x00100},
561 {"support-list", 0x7b1000, 0x00400},
562 {"user-config", 0x7c0000, 0x10000},
563 {"default-config", 0x7d0000, 0x10000},
564 {"log", 0x7e0000, 0x10000},
565 {"radio", 0x7f0000, 0x10000},
569 .first_sysupgrade_partition
= "os-image",
570 .last_sysupgrade_partition
= "support-list",
575 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
578 "WBS210(TP-LINK|UN|N300-2|00000000):2.0\r\n"
579 "WBS210(TP-LINK|US|N300-2|55530000):2.0\r\n"
580 "WBS210(TP-LINK|EU|N300-2|45550000):2.0\r\n",
585 {"fs-uboot", 0x00000, 0x20000},
586 {"partition-table", 0x20000, 0x02000},
587 {"default-mac", 0x30000, 0x00020},
588 {"product-info", 0x31100, 0x00100},
589 {"signature", 0x32000, 0x00400},
590 {"os-image", 0x40000, 0x300000},
591 {"file-system", 0x340000, 0x470000},
592 {"soft-version", 0x7b0000, 0x00100},
593 {"support-list", 0x7b1000, 0x00400},
594 {"user-config", 0x7c0000, 0x10000},
595 {"default-config", 0x7d0000, 0x10000},
596 {"log", 0x7e0000, 0x10000},
597 {"radio", 0x7f0000, 0x10000},
601 .first_sysupgrade_partition
= "os-image",
602 .last_sysupgrade_partition
= "support-list",
607 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
610 "WBS510(TP-LINK|UN|N300-5):1.20\r\n"
611 "WBS510(TP-LINK|US|N300-5):1.20\r\n"
612 "WBS510(TP-LINK|EU|N300-5):1.20\r\n"
613 "WBS510(TP-LINK|CA|N300-5):1.20\r\n",
618 {"fs-uboot", 0x00000, 0x20000},
619 {"partition-table", 0x20000, 0x02000},
620 {"default-mac", 0x30000, 0x00020},
621 {"product-info", 0x31100, 0x00100},
622 {"signature", 0x32000, 0x00400},
623 {"os-image", 0x40000, 0x300000},
624 {"file-system", 0x340000, 0x470000},
625 {"soft-version", 0x7b0000, 0x00100},
626 {"support-list", 0x7b1000, 0x00400},
627 {"user-config", 0x7c0000, 0x10000},
628 {"default-config", 0x7d0000, 0x10000},
629 {"log", 0x7e0000, 0x10000},
630 {"radio", 0x7f0000, 0x10000},
634 .first_sysupgrade_partition
= "os-image",
635 .last_sysupgrade_partition
= "support-list",
640 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
643 "WBS510(TP-LINK|UN|N300-5|00000000):2.0\r\n"
644 "WBS510(TP-LINK|US|N300-5|55530000):2.0\r\n"
645 "WBS510(TP-LINK|EU|N300-5|45550000):2.0\r\n"
646 "WBS510(TP-LINK|CA|N300-5|43410000):2.0\r\n",
651 {"fs-uboot", 0x00000, 0x20000},
652 {"partition-table", 0x20000, 0x02000},
653 {"default-mac", 0x30000, 0x00020},
654 {"product-info", 0x31100, 0x00100},
655 {"signature", 0x32000, 0x00400},
656 {"os-image", 0x40000, 0x300000},
657 {"file-system", 0x340000, 0x470000},
658 {"soft-version", 0x7b0000, 0x00100},
659 {"support-list", 0x7b1000, 0x00400},
660 {"user-config", 0x7c0000, 0x10000},
661 {"default-config", 0x7d0000, 0x10000},
662 {"log", 0x7e0000, 0x10000},
663 {"radio", 0x7f0000, 0x10000},
667 .first_sysupgrade_partition
= "os-image",
668 .last_sysupgrade_partition
= "support-list",
671 /** Firmware layout for the AD7200 */
677 "{product_name:Talon AD7200,product_ver:1.0.0,special_id:00000000}\r\n",
682 {"SBL1", 0x00000, 0x20000},
683 {"MIBIB", 0x20000, 0x20000},
684 {"SBL2", 0x40000, 0x20000},
685 {"SBL3", 0x60000, 0x30000},
686 {"DDRCONFIG", 0x90000, 0x10000},
687 {"SSD", 0xa0000, 0x10000},
688 {"TZ", 0xb0000, 0x30000},
689 {"RPM", 0xe0000, 0x20000},
690 {"fs-uboot", 0x100000, 0x70000},
691 {"uboot-env", 0x170000, 0x40000},
692 {"radio", 0x1b0000, 0x40000},
693 {"os-image", 0x1f0000, 0x400000},
694 {"file-system", 0x5f0000, 0x1900000},
695 {"default-mac", 0x1ef0000, 0x00200},
696 {"pin", 0x1ef0200, 0x00200},
697 {"device-id", 0x1ef0400, 0x00200},
698 {"product-info", 0x1ef0600, 0x0fa00},
699 {"partition-table", 0x1f00000, 0x10000},
700 {"soft-version", 0x1f10000, 0x10000},
701 {"support-list", 0x1f20000, 0x10000},
702 {"profile", 0x1f30000, 0x10000},
703 {"default-config", 0x1f40000, 0x10000},
704 {"user-config", 0x1f50000, 0x40000},
705 {"qos-db", 0x1f90000, 0x40000},
706 {"usb-config", 0x1fd0000, 0x10000},
707 {"log", 0x1fe0000, 0x20000},
711 .first_sysupgrade_partition
= "os-image",
712 .last_sysupgrade_partition
= "file-system"
715 /** Firmware layout for the C2600 */
721 "{product_name:Archer C2600,product_ver:1.0.0,special_id:00000000}\r\n",
726 We use a bigger os-image partition than the stock images (and thus
727 smaller file-system), as our kernel doesn't fit in the stock firmware's
728 2 MB os-image since kernel 4.14.
731 {"SBL1", 0x00000, 0x20000},
732 {"MIBIB", 0x20000, 0x20000},
733 {"SBL2", 0x40000, 0x20000},
734 {"SBL3", 0x60000, 0x30000},
735 {"DDRCONFIG", 0x90000, 0x10000},
736 {"SSD", 0xa0000, 0x10000},
737 {"TZ", 0xb0000, 0x30000},
738 {"RPM", 0xe0000, 0x20000},
739 {"fs-uboot", 0x100000, 0x70000},
740 {"uboot-env", 0x170000, 0x40000},
741 {"radio", 0x1b0000, 0x40000},
742 {"os-image", 0x1f0000, 0x400000}, /* Stock: base 0x1f0000 size 0x200000 */
743 {"file-system", 0x5f0000, 0x1900000}, /* Stock: base 0x3f0000 size 0x1b00000 */
744 {"default-mac", 0x1ef0000, 0x00200},
745 {"pin", 0x1ef0200, 0x00200},
746 {"product-info", 0x1ef0400, 0x0fc00},
747 {"partition-table", 0x1f00000, 0x10000},
748 {"soft-version", 0x1f10000, 0x10000},
749 {"support-list", 0x1f20000, 0x10000},
750 {"profile", 0x1f30000, 0x10000},
751 {"default-config", 0x1f40000, 0x10000},
752 {"user-config", 0x1f50000, 0x40000},
753 {"qos-db", 0x1f90000, 0x40000},
754 {"usb-config", 0x1fd0000, 0x10000},
755 {"log", 0x1fe0000, 0x20000},
759 .first_sysupgrade_partition
= "os-image",
760 .last_sysupgrade_partition
= "file-system"
763 /** Firmware layout for the A7-V5 */
765 .id
= "ARCHER-A7-V5",
768 "{product_name:Archer A7,product_ver:5.0.0,special_id:45550000}\n"
769 "{product_name:Archer A7,product_ver:5.0.0,special_id:55530000}\n"
770 "{product_name:Archer A7,product_ver:5.0.0,special_id:43410000}\n"
771 "{product_name:Archer A7,product_ver:5.0.0,special_id:4A500000}\n"
772 "{product_name:Archer A7,product_ver:5.0.0,special_id:54570000}\n",
774 .soft_ver
= "soft_ver:1.0.0\n",
776 /* We're using a dynamic kernel/rootfs split here */
778 {"factory-boot", 0x00000, 0x20000},
779 {"fs-uboot", 0x20000, 0x20000},
780 {"firmware", 0x40000, 0xec0000}, /* Stock: name os-image base 0x40000 size 0x120000 */
781 /* Stock: name file-system base 0x160000 size 0xda0000 */
782 {"default-mac", 0xf40000, 0x00200},
783 {"pin", 0xf40200, 0x00200},
784 {"device-id", 0xf40400, 0x00100},
785 {"product-info", 0xf40500, 0x0fb00},
786 {"soft-version", 0xf50000, 0x00100},
787 {"extra-para", 0xf51000, 0x01000},
788 {"support-list", 0xf52000, 0x0a000},
789 {"profile", 0xf5c000, 0x04000},
790 {"default-config", 0xf60000, 0x10000},
791 {"user-config", 0xf70000, 0x40000},
792 {"certificate", 0xfb0000, 0x10000},
793 {"partition-table", 0xfc0000, 0x10000},
794 {"log", 0xfd0000, 0x20000},
795 {"radio", 0xff0000, 0x10000},
799 .first_sysupgrade_partition
= "os-image",
800 .last_sysupgrade_partition
= "file-system",
803 /** Firmware layout for the C2v3 */
805 .id
= "ARCHER-C2-V3",
808 "{product_name:ArcherC2,product_ver:3.0.0,special_id:00000000}\n"
809 "{product_name:ArcherC2,product_ver:3.0.0,special_id:55530000}\n"
810 "{product_name:ArcherC2,product_ver:3.0.0,special_id:45550000}\n",
812 .soft_ver
= "soft_ver:3.0.1\n",
814 /** We're using a dynamic kernel/rootfs split here */
817 {"factory-boot", 0x00000, 0x20000},
818 {"fs-uboot", 0x20000, 0x10000},
819 {"firmware", 0x30000, 0x7a0000},
820 {"user-config", 0x7d0000, 0x04000},
821 {"default-mac", 0x7e0000, 0x00100},
822 {"device-id", 0x7e0100, 0x00100},
823 {"extra-para", 0x7e0200, 0x00100},
824 {"pin", 0x7e0300, 0x00100},
825 {"support-list", 0x7e0400, 0x00400},
826 {"soft-version", 0x7e0800, 0x00400},
827 {"product-info", 0x7e0c00, 0x01400},
828 {"partition-table", 0x7e2000, 0x01000},
829 {"profile", 0x7e3000, 0x01000},
830 {"default-config", 0x7e4000, 0x04000},
831 {"merge-config", 0x7ec000, 0x02000},
832 {"qos-db", 0x7ee000, 0x02000},
833 {"radio", 0x7f0000, 0x10000},
837 .first_sysupgrade_partition
= "os-image",
838 .last_sysupgrade_partition
= "file-system",
841 /** Firmware layout for the C25v1 */
843 .id
= "ARCHER-C25-V1",
846 "{product_name:ArcherC25,product_ver:1.0.0,special_id:00000000}\n"
847 "{product_name:ArcherC25,product_ver:1.0.0,special_id:55530000}\n"
848 "{product_name:ArcherC25,product_ver:1.0.0,special_id:45550000}\n",
850 .soft_ver
= "soft_ver:1.0.0\n",
852 /* We're using a dynamic kernel/rootfs split here */
854 {"factory-boot", 0x00000, 0x20000},
855 {"fs-uboot", 0x20000, 0x10000},
856 {"firmware", 0x30000, 0x7a0000}, /* Stock: name os-image base 0x30000 size 0x100000 */
857 /* Stock: name file-system base 0x130000 size 0x6a0000 */
858 {"user-config", 0x7d0000, 0x04000},
859 {"default-mac", 0x7e0000, 0x00100},
860 {"device-id", 0x7e0100, 0x00100},
861 {"extra-para", 0x7e0200, 0x00100},
862 {"pin", 0x7e0300, 0x00100},
863 {"support-list", 0x7e0400, 0x00400},
864 {"soft-version", 0x7e0800, 0x00400},
865 {"product-info", 0x7e0c00, 0x01400},
866 {"partition-table", 0x7e2000, 0x01000},
867 {"profile", 0x7e3000, 0x01000},
868 {"default-config", 0x7e4000, 0x04000},
869 {"merge-config", 0x7ec000, 0x02000},
870 {"qos-db", 0x7ee000, 0x02000},
871 {"radio", 0x7f0000, 0x10000},
875 .first_sysupgrade_partition
= "os-image",
876 .last_sysupgrade_partition
= "file-system",
879 /** Firmware layout for the C58v1 */
881 .id
= "ARCHER-C58-V1",
885 "{product_name:Archer C58,product_ver:1.0.0,special_id:00000000}\r\n"
886 "{product_name:Archer C58,product_ver:1.0.0,special_id:45550000}\r\n"
887 "{product_name:Archer C58,product_ver:1.0.0,special_id:55530000}\r\n",
889 .soft_ver
= "soft_ver:1.0.0\n",
892 {"fs-uboot", 0x00000, 0x10000},
893 {"default-mac", 0x10000, 0x00200},
894 {"pin", 0x10200, 0x00200},
895 {"product-info", 0x10400, 0x00100},
896 {"partition-table", 0x10500, 0x00800},
897 {"soft-version", 0x11300, 0x00200},
898 {"support-list", 0x11500, 0x00100},
899 {"device-id", 0x11600, 0x00100},
900 {"profile", 0x11700, 0x03900},
901 {"default-config", 0x15000, 0x04000},
902 {"user-config", 0x19000, 0x04000},
903 {"firmware", 0x20000, 0x7c8000},
904 {"certyficate", 0x7e8000, 0x08000},
905 {"radio", 0x7f0000, 0x10000},
909 .first_sysupgrade_partition
= "os-image",
910 .last_sysupgrade_partition
= "file-system",
913 /** Firmware layout for the C59v1 */
915 .id
= "ARCHER-C59-V1",
919 "{product_name:Archer C59,product_ver:1.0.0,special_id:00000000}\r\n"
920 "{product_name:Archer C59,product_ver:1.0.0,special_id:45550000}\r\n"
921 "{product_name:Archer C59,product_ver:1.0.0,special_id:52550000}\r\n"
922 "{product_name:Archer C59,product_ver:1.0.0,special_id:55530000}\r\n",
924 .soft_ver
= "soft_ver:1.0.0\n",
926 /* We're using a dynamic kernel/rootfs split here */
928 {"fs-uboot", 0x00000, 0x10000},
929 {"default-mac", 0x10000, 0x00200},
930 {"pin", 0x10200, 0x00200},
931 {"device-id", 0x10400, 0x00100},
932 {"product-info", 0x10500, 0x0fb00},
933 {"firmware", 0x20000, 0xe30000},
934 {"partition-table", 0xe50000, 0x10000},
935 {"soft-version", 0xe60000, 0x10000},
936 {"support-list", 0xe70000, 0x10000},
937 {"profile", 0xe80000, 0x10000},
938 {"default-config", 0xe90000, 0x10000},
939 {"user-config", 0xea0000, 0x40000},
940 {"usb-config", 0xee0000, 0x10000},
941 {"certificate", 0xef0000, 0x10000},
942 {"qos-db", 0xf00000, 0x40000},
943 {"log", 0xfe0000, 0x10000},
944 {"radio", 0xff0000, 0x10000},
948 .first_sysupgrade_partition
= "os-image",
949 .last_sysupgrade_partition
= "file-system",
952 /** Firmware layout for the C59v2 */
954 .id
= "ARCHER-C59-V2",
958 "{product_name:Archer C59,product_ver:2.0.0,special_id:00000000}\r\n"
959 "{product_name:Archer C59,product_ver:2.0.0,special_id:45550000}\r\n"
960 "{product_name:Archer C59,product_ver:2.0.0,special_id:55530000}\r\n",
962 .soft_ver
= "soft_ver:2.0.0 Build 20161206 rel.7303\n",
964 /** We're using a dynamic kernel/rootfs split here */
966 {"factory-boot", 0x00000, 0x20000},
967 {"fs-uboot", 0x20000, 0x10000},
968 {"default-mac", 0x30000, 0x00200},
969 {"pin", 0x30200, 0x00200},
970 {"device-id", 0x30400, 0x00100},
971 {"product-info", 0x30500, 0x0fb00},
972 {"firmware", 0x40000, 0xe10000},
973 {"partition-table", 0xe50000, 0x10000},
974 {"soft-version", 0xe60000, 0x10000},
975 {"support-list", 0xe70000, 0x10000},
976 {"profile", 0xe80000, 0x10000},
977 {"default-config", 0xe90000, 0x10000},
978 {"user-config", 0xea0000, 0x40000},
979 {"usb-config", 0xee0000, 0x10000},
980 {"certificate", 0xef0000, 0x10000},
981 {"extra-para", 0xf00000, 0x10000},
982 {"qos-db", 0xf10000, 0x30000},
983 {"log", 0xfe0000, 0x10000},
984 {"radio", 0xff0000, 0x10000},
988 .first_sysupgrade_partition
= "os-image",
989 .last_sysupgrade_partition
= "file-system",
992 /** Firmware layout for the Archer C6 v2 (EU/RU/JP) */
994 .id
= "ARCHER-C6-V2",
998 "{product_name:Archer C6,product_ver:2.0.0,special_id:45550000}\r\n"
999 "{product_name:Archer C6,product_ver:2.0.0,special_id:52550000}\r\n"
1000 "{product_name:Archer C6,product_ver:2.0.0,special_id:4A500000}\r\n",
1002 .soft_ver
= "soft_ver:1.9.1\n",
1005 {"fs-uboot", 0x00000, 0x20000},
1006 {"default-mac", 0x20000, 0x00200},
1007 {"pin", 0x20200, 0x00100},
1008 {"product-info", 0x20300, 0x00200},
1009 {"device-id", 0x20500, 0x0fb00},
1010 {"firmware", 0x30000, 0x7a9400},
1011 {"soft-version", 0x7d9400, 0x00100},
1012 {"extra-para", 0x7d9500, 0x00100},
1013 {"support-list", 0x7d9600, 0x00200},
1014 {"profile", 0x7d9800, 0x03000},
1015 {"default-config", 0x7dc800, 0x03000},
1016 {"partition-table", 0x7df800, 0x00800},
1017 {"user-config", 0x7e0000, 0x0c000},
1018 {"certificate", 0x7ec000, 0x04000},
1019 {"radio", 0x7f0000, 0x10000},
1023 .first_sysupgrade_partition
= "os-image",
1024 .last_sysupgrade_partition
= "file-system",
1027 /** Firmware layout for the Archer C6 v2 (US) and A6 v2 (US/TW) */
1029 .id
= "ARCHER-C6-V2-US",
1033 "{product_name:Archer A6,product_ver:2.0.0,special_id:55530000}\n"
1034 "{product_name:Archer A6,product_ver:2.0.0,special_id:54570000}\n"
1035 "{product_name:Archer C6,product_ver:2.0.0,special_id:55530000}\n",
1037 .soft_ver
= "soft_ver:1.9.1\n",
1040 {"factory-boot", 0x00000, 0x20000},
1041 {"default-mac", 0x20000, 0x00200},
1042 {"pin", 0x20200, 0x00100},
1043 {"product-info", 0x20300, 0x00200},
1044 {"device-id", 0x20500, 0x0fb00},
1045 {"fs-uboot", 0x30000, 0x20000},
1046 {"firmware", 0x50000, 0xf89400},
1047 {"soft-version", 0xfd9400, 0x00100},
1048 {"extra-para", 0xfd9500, 0x00100},
1049 {"support-list", 0xfd9600, 0x00200},
1050 {"profile", 0xfd9800, 0x03000},
1051 {"default-config", 0xfdc800, 0x03000},
1052 {"partition-table", 0xfdf800, 0x00800},
1053 {"user-config", 0xfe0000, 0x0c000},
1054 {"certificate", 0xfec000, 0x04000},
1055 {"radio", 0xff0000, 0x10000},
1058 .first_sysupgrade_partition
= "os-image",
1059 .last_sysupgrade_partition
= "file-system",
1062 /** Firmware layout for the C60v1 */
1064 .id
= "ARCHER-C60-V1",
1068 "{product_name:Archer C60,product_ver:1.0.0,special_id:00000000}\r\n"
1069 "{product_name:Archer C60,product_ver:1.0.0,special_id:45550000}\r\n"
1070 "{product_name:Archer C60,product_ver:1.0.0,special_id:55530000}\r\n",
1072 .soft_ver
= "soft_ver:1.0.0\n",
1075 {"fs-uboot", 0x00000, 0x10000},
1076 {"default-mac", 0x10000, 0x00200},
1077 {"pin", 0x10200, 0x00200},
1078 {"product-info", 0x10400, 0x00100},
1079 {"partition-table", 0x10500, 0x00800},
1080 {"soft-version", 0x11300, 0x00200},
1081 {"support-list", 0x11500, 0x00100},
1082 {"device-id", 0x11600, 0x00100},
1083 {"profile", 0x11700, 0x03900},
1084 {"default-config", 0x15000, 0x04000},
1085 {"user-config", 0x19000, 0x04000},
1086 {"firmware", 0x20000, 0x7c8000},
1087 {"certyficate", 0x7e8000, 0x08000},
1088 {"radio", 0x7f0000, 0x10000},
1092 .first_sysupgrade_partition
= "os-image",
1093 .last_sysupgrade_partition
= "file-system",
1096 /** Firmware layout for the C60v2 */
1098 .id
= "ARCHER-C60-V2",
1102 "{product_name:Archer C60,product_ver:2.0.0,special_id:42520000}\r\n"
1103 "{product_name:Archer C60,product_ver:2.0.0,special_id:45550000}\r\n"
1104 "{product_name:Archer C60,product_ver:2.0.0,special_id:55530000}\r\n",
1106 .soft_ver
= "soft_ver:2.0.0\n",
1109 {"factory-boot", 0x00000, 0x1fb00},
1110 {"default-mac", 0x1fb00, 0x00200},
1111 {"pin", 0x1fd00, 0x00100},
1112 {"product-info", 0x1fe00, 0x00100},
1113 {"device-id", 0x1ff00, 0x00100},
1114 {"fs-uboot", 0x20000, 0x10000},
1115 {"firmware", 0x30000, 0x7a0000},
1116 {"soft-version", 0x7d9500, 0x00100},
1117 {"support-list", 0x7d9600, 0x00100},
1118 {"extra-para", 0x7d9700, 0x00100},
1119 {"profile", 0x7d9800, 0x03000},
1120 {"default-config", 0x7dc800, 0x03000},
1121 {"partition-table", 0x7df800, 0x00800},
1122 {"user-config", 0x7e0000, 0x0c000},
1123 {"certificate", 0x7ec000, 0x04000},
1124 {"radio", 0x7f0000, 0x10000},
1128 .first_sysupgrade_partition
= "os-image",
1129 .last_sysupgrade_partition
= "file-system",
1132 /** Firmware layout for the C60v3 */
1134 .id
= "ARCHER-C60-V3",
1138 "{product_name:Archer C60,product_ver:3.0.0,special_id:42520000}\r\n"
1139 "{product_name:Archer C60,product_ver:3.0.0,special_id:45550000}\r\n"
1140 "{product_name:Archer C60,product_ver:3.0.0,special_id:55530000}\r\n",
1142 .soft_ver
= "soft_ver:3.0.0\n",
1145 {"factory-boot", 0x00000, 0x1fb00},
1146 {"default-mac", 0x1fb00, 0x00200},
1147 {"pin", 0x1fd00, 0x00100},
1148 {"product-info", 0x1fe00, 0x00100},
1149 {"device-id", 0x1ff00, 0x00100},
1150 {"fs-uboot", 0x20000, 0x10000},
1151 {"firmware", 0x30000, 0x7a0000},
1152 {"soft-version", 0x7d9500, 0x00100},
1153 {"support-list", 0x7d9600, 0x00100},
1154 {"extra-para", 0x7d9700, 0x00100},
1155 {"profile", 0x7d9800, 0x03000},
1156 {"default-config", 0x7dc800, 0x03000},
1157 {"partition-table", 0x7df800, 0x00800},
1158 {"user-config", 0x7e0000, 0x0c000},
1159 {"certificate", 0x7ec000, 0x04000},
1160 {"radio", 0x7f0000, 0x10000},
1164 .first_sysupgrade_partition
= "os-image",
1165 .last_sysupgrade_partition
= "file-system",
1168 /** Firmware layout for the C5 */
1170 .id
= "ARCHER-C5-V2",
1174 "{product_name:ArcherC5,product_ver:2.0.0,special_id:00000000}\r\n"
1175 "{product_name:ArcherC5,product_ver:2.0.0,special_id:55530000}\r\n"
1176 "{product_name:ArcherC5,product_ver:2.0.0,special_id:4A500000}\r\n", /* JP version */
1181 {"fs-uboot", 0x00000, 0x40000},
1182 {"os-image", 0x40000, 0x200000},
1183 {"file-system", 0x240000, 0xc00000},
1184 {"default-mac", 0xe40000, 0x00200},
1185 {"pin", 0xe40200, 0x00200},
1186 {"product-info", 0xe40400, 0x00200},
1187 {"partition-table", 0xe50000, 0x10000},
1188 {"soft-version", 0xe60000, 0x00200},
1189 {"support-list", 0xe61000, 0x0f000},
1190 {"profile", 0xe70000, 0x10000},
1191 {"default-config", 0xe80000, 0x10000},
1192 {"user-config", 0xe90000, 0x50000},
1193 {"log", 0xee0000, 0x100000},
1194 {"radio_bk", 0xfe0000, 0x10000},
1195 {"radio", 0xff0000, 0x10000},
1199 .first_sysupgrade_partition
= "os-image",
1200 .last_sysupgrade_partition
= "file-system"
1203 /** Firmware layout for the C7 */
1205 .id
= "ARCHER-C7-V4",
1208 "{product_name:Archer C7,product_ver:4.0.0,special_id:00000000}\n"
1209 "{product_name:Archer C7,product_ver:4.0.0,special_id:41550000}\n"
1210 "{product_name:Archer C7,product_ver:4.0.0,special_id:45550000}\n"
1211 "{product_name:Archer C7,product_ver:4.0.0,special_id:4B520000}\n"
1212 "{product_name:Archer C7,product_ver:4.0.0,special_id:42520000}\n"
1213 "{product_name:Archer C7,product_ver:4.0.0,special_id:4A500000}\n"
1214 "{product_name:Archer C7,product_ver:4.0.0,special_id:52550000}\n"
1215 "{product_name:Archer C7,product_ver:4.0.0,special_id:54570000}\n"
1216 "{product_name:Archer C7,product_ver:4.0.0,special_id:55530000}\n"
1217 "{product_name:Archer C7,product_ver:4.0.0,special_id:43410000}\n",
1219 .soft_ver
= "soft_ver:1.0.0\n",
1221 /* We're using a dynamic kernel/rootfs split here */
1223 {"factory-boot", 0x00000, 0x20000},
1224 {"fs-uboot", 0x20000, 0x20000},
1225 {"firmware", 0x40000, 0xEC0000}, /* Stock: name os-image base 0x40000 size 0x120000 */
1226 /* Stock: name file-system base 0x160000 size 0xda0000 */
1227 {"default-mac", 0xf00000, 0x00200},
1228 {"pin", 0xf00200, 0x00200},
1229 {"device-id", 0xf00400, 0x00100},
1230 {"product-info", 0xf00500, 0x0fb00},
1231 {"soft-version", 0xf10000, 0x00100},
1232 {"extra-para", 0xf11000, 0x01000},
1233 {"support-list", 0xf12000, 0x0a000},
1234 {"profile", 0xf1c000, 0x04000},
1235 {"default-config", 0xf20000, 0x10000},
1236 {"user-config", 0xf30000, 0x40000},
1237 {"qos-db", 0xf70000, 0x40000},
1238 {"certificate", 0xfb0000, 0x10000},
1239 {"partition-table", 0xfc0000, 0x10000},
1240 {"log", 0xfd0000, 0x20000},
1241 {"radio", 0xff0000, 0x10000},
1245 .first_sysupgrade_partition
= "os-image",
1246 .last_sysupgrade_partition
= "file-system",
1249 /** Firmware layout for the C7 v5*/
1251 .id
= "ARCHER-C7-V5",
1254 "{product_name:Archer C7,product_ver:5.0.0,special_id:00000000}\n"
1255 "{product_name:Archer C7,product_ver:5.0.0,special_id:45550000}\n"
1256 "{product_name:Archer C7,product_ver:5.0.0,special_id:55530000}\n"
1257 "{product_name:Archer C7,product_ver:5.0.0,special_id:43410000}\n"
1258 "{product_name:Archer C7,product_ver:5.0.0,special_id:4A500000}\n"
1259 "{product_name:Archer C7,product_ver:5.0.0,special_id:54570000}\n"
1260 "{product_name:Archer C7,product_ver:5.0.0,special_id:52550000}\n"
1261 "{product_name:Archer C7,product_ver:5.0.0,special_id:4B520000}\n",
1264 .soft_ver
= "soft_ver:1.0.0\n",
1266 /* We're using a dynamic kernel/rootfs split here */
1268 {"factory-boot", 0x00000, 0x20000},
1269 {"fs-uboot", 0x20000, 0x20000},
1270 {"partition-table", 0x40000, 0x10000},
1271 {"radio", 0x50000, 0x10000},
1272 {"default-mac", 0x60000, 0x00200},
1273 {"pin", 0x60200, 0x00200},
1274 {"device-id", 0x60400, 0x00100},
1275 {"product-info", 0x60500, 0x0fb00},
1276 {"soft-version", 0x70000, 0x01000},
1277 {"extra-para", 0x71000, 0x01000},
1278 {"support-list", 0x72000, 0x0a000},
1279 {"profile", 0x7c000, 0x04000},
1280 {"user-config", 0x80000, 0x40000},
1283 {"firmware", 0xc0000, 0xf00000}, /* Stock: name os-image base 0xc0000 size 0x120000 */
1284 /* Stock: name file-system base 0x1e0000 size 0xde0000 */
1286 {"log", 0xfc0000, 0x20000},
1287 {"certificate", 0xfe0000, 0x10000},
1288 {"default-config", 0xff0000, 0x10000},
1293 .first_sysupgrade_partition
= "os-image",
1294 .last_sysupgrade_partition
= "file-system",
1297 /** Firmware layout for the C9 */
1303 "{product_name:ArcherC9,"
1304 "product_ver:1.0.0,"
1305 "special_id:00000000}\n",
1310 {"fs-uboot", 0x00000, 0x40000},
1311 {"os-image", 0x40000, 0x200000},
1312 {"file-system", 0x240000, 0xc00000},
1313 {"default-mac", 0xe40000, 0x00200},
1314 {"pin", 0xe40200, 0x00200},
1315 {"product-info", 0xe40400, 0x00200},
1316 {"partition-table", 0xe50000, 0x10000},
1317 {"soft-version", 0xe60000, 0x00200},
1318 {"support-list", 0xe61000, 0x0f000},
1319 {"profile", 0xe70000, 0x10000},
1320 {"default-config", 0xe80000, 0x10000},
1321 {"user-config", 0xe90000, 0x50000},
1322 {"log", 0xee0000, 0x100000},
1323 {"radio_bk", 0xfe0000, 0x10000},
1324 {"radio", 0xff0000, 0x10000},
1328 .first_sysupgrade_partition
= "os-image",
1329 .last_sysupgrade_partition
= "file-system"
1332 /** Firmware layout for the EAP120 */
1335 .vendor
= "EAP120(TP-LINK|UN|N300-2):1.0\r\n",
1338 "EAP120(TP-LINK|UN|N300-2):1.0\r\n",
1343 {"fs-uboot", 0x00000, 0x20000},
1344 {"partition-table", 0x20000, 0x02000},
1345 {"default-mac", 0x30000, 0x00020},
1346 {"support-list", 0x31000, 0x00100},
1347 {"product-info", 0x31100, 0x00100},
1348 {"soft-version", 0x32000, 0x00100},
1349 {"os-image", 0x40000, 0x180000},
1350 {"file-system", 0x1c0000, 0x600000},
1351 {"user-config", 0x7c0000, 0x10000},
1352 {"backup-config", 0x7d0000, 0x10000},
1353 {"log", 0x7e0000, 0x10000},
1354 {"radio", 0x7f0000, 0x10000},
1358 .first_sysupgrade_partition
= "os-image",
1359 .last_sysupgrade_partition
= "file-system"
1362 /** Firmware layout for the EAP225-Outdoor v1 */
1364 .id
= "EAP225-OUTDOOR-V1",
1367 "EAP225-Outdoor(TP-Link|UN|AC1200-D):1.0\r\n",
1368 .part_trail
= PART_TRAIL_NONE
,
1370 .soft_ver_compat_level
= 1,
1373 {"fs-uboot", 0x00000, 0x20000},
1374 {"partition-table", 0x20000, 0x02000},
1375 {"default-mac", 0x30000, 0x01000},
1376 {"support-list", 0x31000, 0x00100},
1377 {"product-info", 0x31100, 0x00400},
1378 {"soft-version", 0x32000, 0x00100},
1379 {"firmware", 0x40000, 0xd80000},
1380 {"user-config", 0xdc0000, 0x30000},
1381 {"mutil-log", 0xf30000, 0x80000},
1382 {"oops", 0xfb0000, 0x40000},
1383 {"radio", 0xff0000, 0x10000},
1387 .first_sysupgrade_partition
= "os-image",
1388 .last_sysupgrade_partition
= "file-system"
1391 /** Firmware layout for the EAP225 v3 */
1396 "EAP225(TP-Link|UN|AC1350-D):3.0\r\n",
1397 .part_trail
= PART_TRAIL_NONE
,
1399 .soft_ver_compat_level
= 1,
1402 {"fs-uboot", 0x00000, 0x20000},
1403 {"partition-table", 0x20000, 0x02000},
1404 {"default-mac", 0x30000, 0x01000},
1405 {"support-list", 0x31000, 0x00100},
1406 {"product-info", 0x31100, 0x00400},
1407 {"soft-version", 0x32000, 0x00100},
1408 {"firmware", 0x40000, 0xd80000},
1409 {"user-config", 0xdc0000, 0x30000},
1410 {"mutil-log", 0xf30000, 0x80000},
1411 {"oops", 0xfb0000, 0x40000},
1412 {"radio", 0xff0000, 0x10000},
1416 .first_sysupgrade_partition
= "os-image",
1417 .last_sysupgrade_partition
= "file-system"
1420 /** Firmware layout for the EAP225-Wall v2 */
1422 .id
= "EAP225-WALL-V2",
1425 "EAP225-Wall(TP-Link|UN|AC1200-D):2.0\r\n",
1426 .part_trail
= PART_TRAIL_NONE
,
1428 .soft_ver_compat_level
= 1,
1431 {"fs-uboot", 0x00000, 0x20000},
1432 {"partition-table", 0x20000, 0x02000},
1433 {"default-mac", 0x30000, 0x01000},
1434 {"support-list", 0x31000, 0x00100},
1435 {"product-info", 0x31100, 0x00400},
1436 {"soft-version", 0x32000, 0x00100},
1437 {"firmware", 0x40000, 0xd80000},
1438 {"user-config", 0xdc0000, 0x30000},
1439 {"mutil-log", 0xf30000, 0x80000},
1440 {"oops", 0xfb0000, 0x40000},
1441 {"radio", 0xff0000, 0x10000},
1445 .first_sysupgrade_partition
= "os-image",
1446 .last_sysupgrade_partition
= "file-system"
1449 /** Firmware layout for the EAP245 v1 */
1454 "EAP245(TP-LINK|UN|AC1750-D):1.0\r\n",
1455 .part_trail
= PART_TRAIL_NONE
,
1459 {"fs-uboot", 0x00000, 0x20000},
1460 {"partition-table", 0x20000, 0x02000},
1461 {"default-mac", 0x30000, 0x01000},
1462 {"support-list", 0x31000, 0x00100},
1463 {"product-info", 0x31100, 0x00400},
1464 {"soft-version", 0x32000, 0x00100},
1465 {"firmware", 0x40000, 0xd80000},
1466 {"user-config", 0xdc0000, 0x30000},
1467 {"radio", 0xff0000, 0x10000},
1471 .first_sysupgrade_partition
= "os-image",
1472 .last_sysupgrade_partition
= "file-system"
1475 /** Firmware layout for the EAP245 v3 */
1480 "EAP245(TP-Link|UN|AC1750-D):3.0\r\n",
1481 .part_trail
= PART_TRAIL_NONE
,
1483 .soft_ver_compat_level
= 1,
1485 /** Firmware partition with dynamic kernel/rootfs split */
1487 {"factroy-boot", 0x00000, 0x40000},
1488 {"fs-uboot", 0x40000, 0x40000},
1489 {"partition-table", 0x80000, 0x10000},
1490 {"default-mac", 0x90000, 0x01000},
1491 {"support-list", 0x91000, 0x00100},
1492 {"product-info", 0x91100, 0x00400},
1493 {"soft-version", 0x92000, 0x00100},
1494 {"radio", 0xa0000, 0x10000},
1495 {"extra-para", 0xb0000, 0x10000},
1496 {"firmware", 0xc0000, 0xe40000},
1497 {"config", 0xf00000, 0x30000},
1498 {"mutil-log", 0xf30000, 0x80000},
1499 {"oops", 0xfb0000, 0x40000},
1503 .first_sysupgrade_partition
= "os-image",
1504 .last_sysupgrade_partition
= "file-system"
1507 /** Firmware layout for the TL-WA850RE v2 */
1509 .id
= "TLWA850REV2",
1513 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:55530000}\n"
1514 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:00000000}\n"
1515 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:55534100}\n"
1516 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:45550000}\n"
1517 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:4B520000}\n"
1518 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:42520000}\n"
1519 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:4A500000}\n"
1520 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:43410000}\n"
1521 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:41550000}\n"
1522 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:52550000}\n",
1527 576KB were moved from file-system to os-image
1528 in comparison to the stock image
1531 {"fs-uboot", 0x00000, 0x20000},
1532 {"firmware", 0x20000, 0x390000},
1533 {"partition-table", 0x3b0000, 0x02000},
1534 {"default-mac", 0x3c0000, 0x00020},
1535 {"pin", 0x3c0100, 0x00020},
1536 {"product-info", 0x3c1000, 0x01000},
1537 {"soft-version", 0x3c2000, 0x00100},
1538 {"support-list", 0x3c3000, 0x01000},
1539 {"profile", 0x3c4000, 0x08000},
1540 {"user-config", 0x3d0000, 0x10000},
1541 {"default-config", 0x3e0000, 0x10000},
1542 {"radio", 0x3f0000, 0x10000},
1546 .first_sysupgrade_partition
= "os-image",
1547 .last_sysupgrade_partition
= "file-system"
1550 /** Firmware layout for the TL-WA855RE v1 */
1552 .id
= "TLWA855REV1",
1556 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:00000000}\n"
1557 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:55530000}\n"
1558 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:45550000}\n"
1559 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:4B520000}\n"
1560 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:42520000}\n"
1561 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:4A500000}\n"
1562 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:43410000}\n"
1563 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:41550000}\n"
1564 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:52550000}\n",
1569 {"fs-uboot", 0x00000, 0x20000},
1570 {"os-image", 0x20000, 0x150000},
1571 {"file-system", 0x170000, 0x240000},
1572 {"partition-table", 0x3b0000, 0x02000},
1573 {"default-mac", 0x3c0000, 0x00020},
1574 {"pin", 0x3c0100, 0x00020},
1575 {"product-info", 0x3c1000, 0x01000},
1576 {"soft-version", 0x3c2000, 0x00100},
1577 {"support-list", 0x3c3000, 0x01000},
1578 {"profile", 0x3c4000, 0x08000},
1579 {"user-config", 0x3d0000, 0x10000},
1580 {"default-config", 0x3e0000, 0x10000},
1581 {"radio", 0x3f0000, 0x10000},
1585 .first_sysupgrade_partition
= "os-image",
1586 .last_sysupgrade_partition
= "file-system"
1589 /** Firmware layout for the TL-WPA8630P v2 (EU)*/
1591 .id
= "TL-WPA8630P-V2.0-EU",
1595 "{product_name:TL-WPA8630P,product_ver:2.0.0,special_id:45550000}\n",
1600 {"factory-uboot", 0x00000, 0x20000},
1601 {"fs-uboot", 0x20000, 0x20000},
1602 {"firmware", 0x40000, 0x5e0000},
1603 {"partition-table", 0x620000, 0x02000},
1604 {"default-mac", 0x630000, 0x00020},
1605 {"pin", 0x630100, 0x00020},
1606 {"device-id", 0x630200, 0x00030},
1607 {"product-info", 0x631100, 0x01000},
1608 {"extra-para", 0x632100, 0x01000},
1609 {"soft-version", 0x640000, 0x01000},
1610 {"support-list", 0x641000, 0x01000},
1611 {"profile", 0x642000, 0x08000},
1612 {"user-config", 0x650000, 0x10000},
1613 {"default-config", 0x660000, 0x10000},
1614 {"default-nvm", 0x670000, 0xc0000},
1615 {"default-pib", 0x730000, 0x40000},
1616 {"radio", 0x7f0000, 0x10000},
1620 .first_sysupgrade_partition
= "os-image",
1621 .last_sysupgrade_partition
= "file-system"
1624 /** Firmware layout for the TL-WPA8630P v2 (INT)*/
1626 .id
= "TL-WPA8630P-V2-INT",
1630 "{product_name:TL-WPA8630P,product_ver:2.0.0,special_id:41550000}\n"
1631 "{product_name:TL-WPA8630P,product_ver:2.0.0,special_id:44450000}\n"
1632 "{product_name:TL-WPA8630P,product_ver:2.1.0,special_id:41550000}\n",
1637 {"factory-uboot", 0x00000, 0x20000},
1638 {"fs-uboot", 0x20000, 0x20000},
1639 {"firmware", 0x40000, 0x5e0000},
1640 {"partition-table", 0x620000, 0x02000},
1641 {"extra-para", 0x632100, 0x01000},
1642 {"soft-version", 0x640000, 0x01000},
1643 {"support-list", 0x641000, 0x01000},
1644 {"profile", 0x642000, 0x08000},
1645 {"user-config", 0x650000, 0x10000},
1646 {"default-config", 0x660000, 0x10000},
1647 {"default-nvm", 0x670000, 0xc0000},
1648 {"default-pib", 0x730000, 0x40000},
1649 {"default-mac", 0x7e0000, 0x00020},
1650 {"pin", 0x7e0100, 0x00020},
1651 {"device-id", 0x7e0200, 0x00030},
1652 {"product-info", 0x7e1100, 0x01000},
1653 {"radio", 0x7f0000, 0x10000},
1657 .first_sysupgrade_partition
= "os-image",
1658 .last_sysupgrade_partition
= "file-system"
1661 /** Firmware layout for the TL-WPA8630P v2.1 (EU)*/
1663 .id
= "TL-WPA8630P-V2.1-EU",
1667 "{product_name:TL-WPA8630P,product_ver:2.1.0,special_id:45550000}\n",
1672 {"factory-uboot", 0x00000, 0x20000},
1673 {"fs-uboot", 0x20000, 0x20000},
1674 {"firmware", 0x40000, 0x5e0000},
1675 {"extra-para", 0x680000, 0x01000},
1676 {"product-info", 0x690000, 0x01000},
1677 {"partition-table", 0x6a0000, 0x02000},
1678 {"soft-version", 0x6b0000, 0x01000},
1679 {"support-list", 0x6b1000, 0x01000},
1680 {"profile", 0x6b2000, 0x08000},
1681 {"user-config", 0x6c0000, 0x10000},
1682 {"default-config", 0x6d0000, 0x10000},
1683 {"default-nvm", 0x6e0000, 0xc0000},
1684 {"default-pib", 0x7a0000, 0x40000},
1685 {"default-mac", 0x7e0000, 0x00020},
1686 {"pin", 0x7e0100, 0x00020},
1687 {"device-id", 0x7e0200, 0x00030},
1688 {"radio", 0x7f0000, 0x10000},
1692 .first_sysupgrade_partition
= "os-image",
1693 .last_sysupgrade_partition
= "file-system"
1696 /** Firmware layout for the TL-WR1043 v5 */
1698 .id
= "TLWR1043NV5",
1702 "{product_name:TL-WR1043N,product_ver:5.0.0,special_id:45550000}\n"
1703 "{product_name:TL-WR1043N,product_ver:5.0.0,special_id:55530000}\n",
1705 .soft_ver
= "soft_ver:1.0.0\n",
1707 {"factory-boot", 0x00000, 0x20000},
1708 {"fs-uboot", 0x20000, 0x20000},
1709 {"firmware", 0x40000, 0xec0000},
1710 {"default-mac", 0xf00000, 0x00200},
1711 {"pin", 0xf00200, 0x00200},
1712 {"device-id", 0xf00400, 0x00100},
1713 {"product-info", 0xf00500, 0x0fb00},
1714 {"soft-version", 0xf10000, 0x01000},
1715 {"extra-para", 0xf11000, 0x01000},
1716 {"support-list", 0xf12000, 0x0a000},
1717 {"profile", 0xf1c000, 0x04000},
1718 {"default-config", 0xf20000, 0x10000},
1719 {"user-config", 0xf30000, 0x40000},
1720 {"qos-db", 0xf70000, 0x40000},
1721 {"certificate", 0xfb0000, 0x10000},
1722 {"partition-table", 0xfc0000, 0x10000},
1723 {"log", 0xfd0000, 0x20000},
1724 {"radio", 0xff0000, 0x10000},
1727 .first_sysupgrade_partition
= "os-image",
1728 .last_sysupgrade_partition
= "file-system"
1731 /** Firmware layout for the TL-WR1043 v4 */
1733 .id
= "TLWR1043NDV4",
1737 "{product_name:TL-WR1043ND,product_ver:4.0.0,special_id:45550000}\n",
1741 /* We're using a dynamic kernel/rootfs split here */
1743 {"fs-uboot", 0x00000, 0x20000},
1744 {"firmware", 0x20000, 0xf30000},
1745 {"default-mac", 0xf50000, 0x00200},
1746 {"pin", 0xf50200, 0x00200},
1747 {"product-info", 0xf50400, 0x0fc00},
1748 {"soft-version", 0xf60000, 0x0b000},
1749 {"support-list", 0xf6b000, 0x04000},
1750 {"profile", 0xf70000, 0x04000},
1751 {"default-config", 0xf74000, 0x0b000},
1752 {"user-config", 0xf80000, 0x40000},
1753 {"partition-table", 0xfc0000, 0x10000},
1754 {"log", 0xfd0000, 0x20000},
1755 {"radio", 0xff0000, 0x10000},
1759 .first_sysupgrade_partition
= "os-image",
1760 .last_sysupgrade_partition
= "file-system"
1763 /** Firmware layout for the TL-WR902AC v1 */
1765 .id
= "TL-WR902AC-V1",
1769 "{product_name:TL-WR902AC,product_ver:1.0.0,special_id:45550000}\n"
1770 "{product_name:TL-WR902AC,product_ver:1.0.0,special_id:55530000}\n",
1775 384KB were moved from file-system to os-image
1776 in comparison to the stock image
1779 {"fs-uboot", 0x00000, 0x20000},
1780 {"firmware", 0x20000, 0x730000},
1781 {"default-mac", 0x750000, 0x00200},
1782 {"pin", 0x750200, 0x00200},
1783 {"product-info", 0x750400, 0x0fc00},
1784 {"soft-version", 0x760000, 0x0b000},
1785 {"support-list", 0x76b000, 0x04000},
1786 {"profile", 0x770000, 0x04000},
1787 {"default-config", 0x774000, 0x0b000},
1788 {"user-config", 0x780000, 0x40000},
1789 {"partition-table", 0x7c0000, 0x10000},
1790 {"log", 0x7d0000, 0x20000},
1791 {"radio", 0x7f0000, 0x10000},
1795 .first_sysupgrade_partition
= "os-image",
1796 .last_sysupgrade_partition
= "file-system",
1799 /** Firmware layout for the TL-WR942N V1 */
1805 "{product_name:TL-WR942N,product_ver:1.0.0,special_id:00000000}\r\n"
1806 "{product_name:TL-WR942N,product_ver:1.0.0,special_id:52550000}\r\n",
1811 {"fs-uboot", 0x00000, 0x20000},
1812 {"firmware", 0x20000, 0xe20000},
1813 {"default-mac", 0xe40000, 0x00200},
1814 {"pin", 0xe40200, 0x00200},
1815 {"product-info", 0xe40400, 0x0fc00},
1816 {"partition-table", 0xe50000, 0x10000},
1817 {"soft-version", 0xe60000, 0x10000},
1818 {"support-list", 0xe70000, 0x10000},
1819 {"profile", 0xe80000, 0x10000},
1820 {"default-config", 0xe90000, 0x10000},
1821 {"user-config", 0xea0000, 0x40000},
1822 {"qos-db", 0xee0000, 0x40000},
1823 {"certificate", 0xf20000, 0x10000},
1824 {"usb-config", 0xfb0000, 0x10000},
1825 {"log", 0xfc0000, 0x20000},
1826 {"radio-bk", 0xfe0000, 0x10000},
1827 {"radio", 0xff0000, 0x10000},
1831 .first_sysupgrade_partition
= "os-image",
1832 .last_sysupgrade_partition
= "file-system",
1835 /** Firmware layout for the RE200 v2 */
1841 "{product_name:RE200,product_ver:2.0.0,special_id:00000000}\n"
1842 "{product_name:RE200,product_ver:2.0.0,special_id:41520000}\n"
1843 "{product_name:RE200,product_ver:2.0.0,special_id:41550000}\n"
1844 "{product_name:RE200,product_ver:2.0.0,special_id:42520000}\n"
1845 "{product_name:RE200,product_ver:2.0.0,special_id:43410000}\n"
1846 "{product_name:RE200,product_ver:2.0.0,special_id:45530000}\n"
1847 "{product_name:RE200,product_ver:2.0.0,special_id:45550000}\n"
1848 "{product_name:RE200,product_ver:2.0.0,special_id:49440000}\n"
1849 "{product_name:RE200,product_ver:2.0.0,special_id:4a500000}\n"
1850 "{product_name:RE200,product_ver:2.0.0,special_id:4b520000}\n"
1851 "{product_name:RE200,product_ver:2.0.0,special_id:52550000}\n"
1852 "{product_name:RE200,product_ver:2.0.0,special_id:54570000}\n"
1853 "{product_name:RE200,product_ver:2.0.0,special_id:55530000}\n",
1858 {"fs-uboot", 0x00000, 0x20000},
1859 {"firmware", 0x20000, 0x7a0000},
1860 {"partition-table", 0x7c0000, 0x02000},
1861 {"default-mac", 0x7c2000, 0x00020},
1862 {"pin", 0x7c2100, 0x00020},
1863 {"product-info", 0x7c3100, 0x01000},
1864 {"soft-version", 0x7c4200, 0x01000},
1865 {"support-list", 0x7c5200, 0x01000},
1866 {"profile", 0x7c6200, 0x08000},
1867 {"config-info", 0x7ce200, 0x00400},
1868 {"user-config", 0x7d0000, 0x10000},
1869 {"default-config", 0x7e0000, 0x10000},
1870 {"radio", 0x7f0000, 0x10000},
1874 .first_sysupgrade_partition
= "os-image",
1875 .last_sysupgrade_partition
= "file-system"
1878 /** Firmware layout for the RE200 v3 */
1884 "{product_name:RE200,product_ver:3.0.0,special_id:00000000}\n"
1885 "{product_name:RE200,product_ver:3.0.0,special_id:41520000}\n"
1886 "{product_name:RE200,product_ver:3.0.0,special_id:41550000}\n"
1887 "{product_name:RE200,product_ver:3.0.0,special_id:42520000}\n"
1888 "{product_name:RE200,product_ver:3.0.0,special_id:43410000}\n"
1889 "{product_name:RE200,product_ver:3.0.0,special_id:45470000}\n"
1890 "{product_name:RE200,product_ver:3.0.0,special_id:45530000}\n"
1891 "{product_name:RE200,product_ver:3.0.0,special_id:45550000}\n"
1892 "{product_name:RE200,product_ver:3.0.0,special_id:49440000}\n"
1893 "{product_name:RE200,product_ver:3.0.0,special_id:4A500000}\n"
1894 "{product_name:RE200,product_ver:3.0.0,special_id:4B520000}\n"
1895 "{product_name:RE200,product_ver:3.0.0,special_id:52550000}\n"
1896 "{product_name:RE200,product_ver:3.0.0,special_id:54570000}\n"
1897 "{product_name:RE200,product_ver:3.0.0,special_id:55530000}\n",
1902 {"fs-uboot", 0x00000, 0x20000},
1903 {"firmware", 0x20000, 0x7a0000},
1904 {"partition-table", 0x7c0000, 0x02000},
1905 {"default-mac", 0x7c2000, 0x00020},
1906 {"pin", 0x7c2100, 0x00020},
1907 {"product-info", 0x7c3100, 0x01000},
1908 {"soft-version", 0x7c4200, 0x01000},
1909 {"support-list", 0x7c5200, 0x01000},
1910 {"profile", 0x7c6200, 0x08000},
1911 {"config-info", 0x7ce200, 0x00400},
1912 {"user-config", 0x7d0000, 0x10000},
1913 {"default-config", 0x7e0000, 0x10000},
1914 {"radio", 0x7f0000, 0x10000},
1918 .first_sysupgrade_partition
= "os-image",
1919 .last_sysupgrade_partition
= "file-system"
1922 /** Firmware layout for the RE200 v4 */
1928 "{product_name:RE200,product_ver:4.0.0,special_id:00000000}\n"
1929 "{product_name:RE200,product_ver:4.0.0,special_id:45550000}\n"
1930 "{product_name:RE200,product_ver:4.0.0,special_id:4A500000}\n"
1931 "{product_name:RE200,product_ver:4.0.0,special_id:4B520000}\n"
1932 "{product_name:RE200,product_ver:4.0.0,special_id:43410000}\n"
1933 "{product_name:RE200,product_ver:4.0.0,special_id:41550000}\n"
1934 "{product_name:RE200,product_ver:4.0.0,special_id:42520000}\n"
1935 "{product_name:RE200,product_ver:4.0.0,special_id:55530000}\n"
1936 "{product_name:RE200,product_ver:4.0.0,special_id:41520000}\n"
1937 "{product_name:RE200,product_ver:4.0.0,special_id:52550000}\n"
1938 "{product_name:RE200,product_ver:4.0.0,special_id:54570000}\n"
1939 "{product_name:RE200,product_ver:4.0.0,special_id:45530000}\n"
1940 "{product_name:RE200,product_ver:4.0.0,special_id:49440000}\n"
1941 "{product_name:RE200,product_ver:4.0.0,special_id:45470000}\n",
1943 .soft_ver
= "soft_ver:1.1.0\n",
1946 {"fs-uboot", 0x00000, 0x20000},
1947 {"firmware", 0x20000, 0x7a0000},
1948 {"partition-table", 0x7c0000, 0x02000},
1949 {"default-mac", 0x7c2000, 0x00020},
1950 {"pin", 0x7c2100, 0x00020},
1951 {"product-info", 0x7c3100, 0x01000},
1952 {"soft-version", 0x7c4200, 0x01000},
1953 {"support-list", 0x7c5200, 0x01000},
1954 {"profile", 0x7c6200, 0x08000},
1955 {"config-info", 0x7ce200, 0x00400},
1956 {"user-config", 0x7d0000, 0x10000},
1957 {"default-config", 0x7e0000, 0x10000},
1958 {"radio", 0x7f0000, 0x10000},
1962 .first_sysupgrade_partition
= "os-image",
1963 .last_sysupgrade_partition
= "file-system"
1966 /** Firmware layout for the RE220 v2 */
1972 "{product_name:RE220,product_ver:2.0.0,special_id:00000000}\n"
1973 "{product_name:RE220,product_ver:2.0.0,special_id:41520000}\n"
1974 "{product_name:RE220,product_ver:2.0.0,special_id:41550000}\n"
1975 "{product_name:RE220,product_ver:2.0.0,special_id:42520000}\n"
1976 "{product_name:RE220,product_ver:2.0.0,special_id:43410000}\n"
1977 "{product_name:RE220,product_ver:2.0.0,special_id:45530000}\n"
1978 "{product_name:RE220,product_ver:2.0.0,special_id:45550000}\n"
1979 "{product_name:RE220,product_ver:2.0.0,special_id:49440000}\n"
1980 "{product_name:RE220,product_ver:2.0.0,special_id:4a500000}\n"
1981 "{product_name:RE220,product_ver:2.0.0,special_id:4b520000}\n"
1982 "{product_name:RE220,product_ver:2.0.0,special_id:52550000}\n"
1983 "{product_name:RE220,product_ver:2.0.0,special_id:54570000}\n"
1984 "{product_name:RE220,product_ver:2.0.0,special_id:55530000}\n",
1989 {"fs-uboot", 0x00000, 0x20000},
1990 {"firmware", 0x20000, 0x7a0000},
1991 {"partition-table", 0x7c0000, 0x02000},
1992 {"default-mac", 0x7c2000, 0x00020},
1993 {"pin", 0x7c2100, 0x00020},
1994 {"product-info", 0x7c3100, 0x01000},
1995 {"soft-version", 0x7c4200, 0x01000},
1996 {"support-list", 0x7c5200, 0x01000},
1997 {"profile", 0x7c6200, 0x08000},
1998 {"config-info", 0x7ce200, 0x00400},
1999 {"user-config", 0x7d0000, 0x10000},
2000 {"default-config", 0x7e0000, 0x10000},
2001 {"radio", 0x7f0000, 0x10000},
2005 .first_sysupgrade_partition
= "os-image",
2006 .last_sysupgrade_partition
= "file-system"
2009 /** Firmware layout for the RE305 v1 */
2015 "{product_name:RE305,product_ver:1.0.0,special_id:45550000}\n"
2016 "{product_name:RE305,product_ver:1.0.0,special_id:55530000}\n"
2017 "{product_name:RE305,product_ver:1.0.0,special_id:4a500000}\n"
2018 "{product_name:RE305,product_ver:1.0.0,special_id:42520000}\n"
2019 "{product_name:RE305,product_ver:1.0.0,special_id:4b520000}\n"
2020 "{product_name:RE305,product_ver:1.0.0,special_id:41550000}\n"
2021 "{product_name:RE305,product_ver:1.0.0,special_id:43410000}\n",
2026 {"fs-uboot", 0x00000, 0x20000},
2027 {"firmware", 0x20000, 0x5e0000},
2028 {"partition-table", 0x600000, 0x02000},
2029 {"default-mac", 0x610000, 0x00020},
2030 {"pin", 0x610100, 0x00020},
2031 {"product-info", 0x611100, 0x01000},
2032 {"soft-version", 0x620000, 0x01000},
2033 {"support-list", 0x621000, 0x01000},
2034 {"profile", 0x622000, 0x08000},
2035 {"user-config", 0x630000, 0x10000},
2036 {"default-config", 0x640000, 0x10000},
2037 {"radio", 0x7f0000, 0x10000},
2041 .first_sysupgrade_partition
= "os-image",
2042 .last_sysupgrade_partition
= "file-system"
2045 /** Firmware layout for the RE350 v1 */
2051 "{product_name:RE350,product_ver:1.0.0,special_id:45550000}\n"
2052 "{product_name:RE350,product_ver:1.0.0,special_id:00000000}\n"
2053 "{product_name:RE350,product_ver:1.0.0,special_id:41550000}\n"
2054 "{product_name:RE350,product_ver:1.0.0,special_id:55530000}\n"
2055 "{product_name:RE350,product_ver:1.0.0,special_id:43410000}\n"
2056 "{product_name:RE350,product_ver:1.0.0,special_id:4b520000}\n"
2057 "{product_name:RE350,product_ver:1.0.0,special_id:4a500000}\n",
2061 /** We're using a dynamic kernel/rootfs split here */
2063 {"fs-uboot", 0x00000, 0x20000},
2064 {"firmware", 0x20000, 0x5e0000},
2065 {"partition-table", 0x600000, 0x02000},
2066 {"default-mac", 0x610000, 0x00020},
2067 {"pin", 0x610100, 0x00020},
2068 {"product-info", 0x611100, 0x01000},
2069 {"soft-version", 0x620000, 0x01000},
2070 {"support-list", 0x621000, 0x01000},
2071 {"profile", 0x622000, 0x08000},
2072 {"user-config", 0x630000, 0x10000},
2073 {"default-config", 0x640000, 0x10000},
2074 {"radio", 0x7f0000, 0x10000},
2078 .first_sysupgrade_partition
= "os-image",
2079 .last_sysupgrade_partition
= "file-system"
2082 /** Firmware layout for the RE350K v1 */
2088 "{product_name:RE350K,product_ver:1.0.0,special_id:00000000,product_region:US}\n",
2092 /** We're using a dynamic kernel/rootfs split here */
2094 {"fs-uboot", 0x00000, 0x20000},
2095 {"firmware", 0x20000, 0xd70000},
2096 {"partition-table", 0xd90000, 0x02000},
2097 {"default-mac", 0xda0000, 0x00020},
2098 {"pin", 0xda0100, 0x00020},
2099 {"product-info", 0xda1100, 0x01000},
2100 {"soft-version", 0xdb0000, 0x01000},
2101 {"support-list", 0xdb1000, 0x01000},
2102 {"profile", 0xdb2000, 0x08000},
2103 {"user-config", 0xdc0000, 0x10000},
2104 {"default-config", 0xdd0000, 0x10000},
2105 {"device-id", 0xde0000, 0x00108},
2106 {"radio", 0xff0000, 0x10000},
2110 .first_sysupgrade_partition
= "os-image",
2111 .last_sysupgrade_partition
= "file-system"
2114 /** Firmware layout for the RE355 */
2120 "{product_name:RE355,product_ver:1.0.0,special_id:00000000}\r\n"
2121 "{product_name:RE355,product_ver:1.0.0,special_id:55530000}\r\n"
2122 "{product_name:RE355,product_ver:1.0.0,special_id:45550000}\r\n"
2123 "{product_name:RE355,product_ver:1.0.0,special_id:4A500000}\r\n"
2124 "{product_name:RE355,product_ver:1.0.0,special_id:43410000}\r\n"
2125 "{product_name:RE355,product_ver:1.0.0,special_id:41550000}\r\n"
2126 "{product_name:RE355,product_ver:1.0.0,special_id:4B520000}\r\n"
2127 "{product_name:RE355,product_ver:1.0.0,special_id:55534100}\r\n",
2131 /* We're using a dynamic kernel/rootfs split here */
2133 {"fs-uboot", 0x00000, 0x20000},
2134 {"firmware", 0x20000, 0x5e0000},
2135 {"partition-table", 0x600000, 0x02000},
2136 {"default-mac", 0x610000, 0x00020},
2137 {"pin", 0x610100, 0x00020},
2138 {"product-info", 0x611100, 0x01000},
2139 {"soft-version", 0x620000, 0x01000},
2140 {"support-list", 0x621000, 0x01000},
2141 {"profile", 0x622000, 0x08000},
2142 {"user-config", 0x630000, 0x10000},
2143 {"default-config", 0x640000, 0x10000},
2144 {"radio", 0x7f0000, 0x10000},
2148 .first_sysupgrade_partition
= "os-image",
2149 .last_sysupgrade_partition
= "file-system"
2152 /** Firmware layout for the RE450 */
2158 "{product_name:RE450,product_ver:1.0.0,special_id:00000000}\r\n"
2159 "{product_name:RE450,product_ver:1.0.0,special_id:55530000}\r\n"
2160 "{product_name:RE450,product_ver:1.0.0,special_id:45550000}\r\n"
2161 "{product_name:RE450,product_ver:1.0.0,special_id:4A500000}\r\n"
2162 "{product_name:RE450,product_ver:1.0.0,special_id:43410000}\r\n"
2163 "{product_name:RE450,product_ver:1.0.0,special_id:41550000}\r\n"
2164 "{product_name:RE450,product_ver:1.0.0,special_id:4B520000}\r\n"
2165 "{product_name:RE450,product_ver:1.0.0,special_id:55534100}\r\n",
2169 /** We're using a dynamic kernel/rootfs split here */
2171 {"fs-uboot", 0x00000, 0x20000},
2172 {"firmware", 0x20000, 0x5e0000},
2173 {"partition-table", 0x600000, 0x02000},
2174 {"default-mac", 0x610000, 0x00020},
2175 {"pin", 0x610100, 0x00020},
2176 {"product-info", 0x611100, 0x01000},
2177 {"soft-version", 0x620000, 0x01000},
2178 {"support-list", 0x621000, 0x01000},
2179 {"profile", 0x622000, 0x08000},
2180 {"user-config", 0x630000, 0x10000},
2181 {"default-config", 0x640000, 0x10000},
2182 {"radio", 0x7f0000, 0x10000},
2186 .first_sysupgrade_partition
= "os-image",
2187 .last_sysupgrade_partition
= "file-system"
2190 /** Firmware layout for the RE450 v2 */
2196 "{product_name:RE450,product_ver:2.0.0,special_id:00000000}\r\n"
2197 "{product_name:RE450,product_ver:2.0.0,special_id:55530000}\r\n"
2198 "{product_name:RE450,product_ver:2.0.0,special_id:45550000}\r\n"
2199 "{product_name:RE450,product_ver:2.0.0,special_id:4A500000}\r\n"
2200 "{product_name:RE450,product_ver:2.0.0,special_id:43410000}\r\n"
2201 "{product_name:RE450,product_ver:2.0.0,special_id:41550000}\r\n"
2202 "{product_name:RE450,product_ver:2.0.0,special_id:41530000}\r\n"
2203 "{product_name:RE450,product_ver:2.0.0,special_id:4B520000}\r\n"
2204 "{product_name:RE450,product_ver:2.0.0,special_id:42520000}\r\n",
2208 /* We're using a dynamic kernel/rootfs split here */
2210 {"fs-uboot", 0x00000, 0x20000},
2211 {"firmware", 0x20000, 0x5e0000},
2212 {"partition-table", 0x600000, 0x02000},
2213 {"default-mac", 0x610000, 0x00020},
2214 {"pin", 0x610100, 0x00020},
2215 {"product-info", 0x611100, 0x01000},
2216 {"soft-version", 0x620000, 0x01000},
2217 {"support-list", 0x621000, 0x01000},
2218 {"profile", 0x622000, 0x08000},
2219 {"user-config", 0x630000, 0x10000},
2220 {"default-config", 0x640000, 0x10000},
2221 {"radio", 0x7f0000, 0x10000},
2225 .first_sysupgrade_partition
= "os-image",
2226 .last_sysupgrade_partition
= "file-system"
2229 /** Firmware layout for the RE450 v3 */
2235 "{product_name:RE450,product_ver:3.0.0,special_id:00000000}\r\n"
2236 "{product_name:RE450,product_ver:3.0.0,special_id:55530000}\r\n"
2237 "{product_name:RE450,product_ver:3.0.0,special_id:45550000}\r\n"
2238 "{product_name:RE450,product_ver:3.0.0,special_id:4A500000}\r\n"
2239 "{product_name:RE450,product_ver:3.0.0,special_id:43410000}\r\n"
2240 "{product_name:RE450,product_ver:3.0.0,special_id:41550000}\r\n"
2241 "{product_name:RE450,product_ver:3.0.0,special_id:41530000}\r\n"
2242 "{product_name:RE450,product_ver:3.0.0,special_id:4B520000}\r\n"
2243 "{product_name:RE450,product_ver:3.0.0,special_id:42520000}\r\n",
2247 /* We're using a dynamic kernel/rootfs split here */
2249 {"fs-uboot", 0x00000, 0x20000},
2250 {"default-mac", 0x20000, 0x00020},
2251 {"pin", 0x20020, 0x00020},
2252 {"product-info", 0x21000, 0x01000},
2253 {"partition-table", 0x22000, 0x02000},
2254 {"soft-version", 0x24000, 0x01000},
2255 {"support-list", 0x25000, 0x01000},
2256 {"profile", 0x26000, 0x08000},
2257 {"user-config", 0x2e000, 0x10000},
2258 {"default-config", 0x3e000, 0x10000},
2259 {"config-info", 0x4e000, 0x00400},
2260 {"firmware", 0x50000, 0x7a0000},
2261 {"radio", 0x7f0000, 0x10000},
2265 .first_sysupgrade_partition
= "os-image",
2266 .last_sysupgrade_partition
= "file-system"
2269 /** Firmware layout for the RE500 */
2275 "{product_name:RE500,product_ver:1.0.0,special_id:00000000}\r\n"
2276 "{product_name:RE500,product_ver:1.0.0,special_id:55530000}\r\n"
2277 "{product_name:RE500,product_ver:1.0.0,special_id:45550000}\r\n"
2278 "{product_name:RE500,product_ver:1.0.0,special_id:4A500000}\r\n"
2279 "{product_name:RE500,product_ver:1.0.0,special_id:43410000}\r\n"
2280 "{product_name:RE500,product_ver:1.0.0,special_id:41550000}\r\n"
2281 "{product_name:RE500,product_ver:1.0.0,special_id:41530000}\r\n",
2285 /* We're using a dynamic kernel/rootfs split here */
2287 {"fs-uboot", 0x00000, 0x20000},
2288 {"firmware", 0x20000, 0xde0000},
2289 {"partition-table", 0xe00000, 0x02000},
2290 {"default-mac", 0xe10000, 0x00020},
2291 {"pin", 0xe10100, 0x00020},
2292 {"product-info", 0xe11100, 0x01000},
2293 {"soft-version", 0xe20000, 0x01000},
2294 {"support-list", 0xe21000, 0x01000},
2295 {"profile", 0xe22000, 0x08000},
2296 {"user-config", 0xe30000, 0x10000},
2297 {"default-config", 0xe40000, 0x10000},
2298 {"radio", 0xff0000, 0x10000},
2302 .first_sysupgrade_partition
= "os-image",
2303 .last_sysupgrade_partition
= "file-system"
2306 /** Firmware layout for the RE650 */
2312 "{product_name:RE650,product_ver:1.0.0,special_id:00000000}\r\n"
2313 "{product_name:RE650,product_ver:1.0.0,special_id:55530000}\r\n"
2314 "{product_name:RE650,product_ver:1.0.0,special_id:45550000}\r\n"
2315 "{product_name:RE650,product_ver:1.0.0,special_id:4A500000}\r\n"
2316 "{product_name:RE650,product_ver:1.0.0,special_id:43410000}\r\n"
2317 "{product_name:RE650,product_ver:1.0.0,special_id:41550000}\r\n"
2318 "{product_name:RE650,product_ver:1.0.0,special_id:41530000}\r\n",
2322 /* We're using a dynamic kernel/rootfs split here */
2324 {"fs-uboot", 0x00000, 0x20000},
2325 {"firmware", 0x20000, 0xde0000},
2326 {"partition-table", 0xe00000, 0x02000},
2327 {"default-mac", 0xe10000, 0x00020},
2328 {"pin", 0xe10100, 0x00020},
2329 {"product-info", 0xe11100, 0x01000},
2330 {"soft-version", 0xe20000, 0x01000},
2331 {"support-list", 0xe21000, 0x01000},
2332 {"profile", 0xe22000, 0x08000},
2333 {"user-config", 0xe30000, 0x10000},
2334 {"default-config", 0xe40000, 0x10000},
2335 {"radio", 0xff0000, 0x10000},
2339 .first_sysupgrade_partition
= "os-image",
2340 .last_sysupgrade_partition
= "file-system"
2346 #define error(_ret, _errno, _str, ...) \
2348 fprintf(stderr, _str ": %s\n", ## __VA_ARGS__, \
2349 strerror(_errno)); \
2355 /** Stores a uint32 as big endian */
2356 static inline void put32(uint8_t *buf
, uint32_t val
) {
2363 static inline bool meta_partition_should_pad(enum partition_trail_value pv
)
2365 return (pv
>= 0) && (pv
<= PART_TRAIL_MAX
);
2368 /** Allocate a padded meta partition with a correctly initialised header
2369 * If the `data` pointer is NULL, then the required space is only allocated,
2370 * otherwise `data_len` bytes will be copied from `data` into the partition
2372 static struct image_partition_entry
init_meta_partition_entry(
2373 const char *name
, const void *data
, uint32_t data_len
,
2374 enum partition_trail_value pad_value
)
2376 uint32_t total_len
= sizeof(struct meta_header
) + data_len
;
2377 if (meta_partition_should_pad(pad_value
))
2380 struct image_partition_entry entry
= {
2383 .data
= malloc(total_len
)
2386 error(1, errno
, "failed to allocate meta partition entry");
2388 struct meta_header
*header
= (struct meta_header
*)entry
.data
;
2389 header
->length
= htonl(data_len
);
2393 memcpy(entry
.data
+sizeof(*header
), data
, data_len
);
2395 if (meta_partition_should_pad(pad_value
))
2396 entry
.data
[total_len
- 1] = (uint8_t) pad_value
;
2401 /** Allocates a new image partition */
2402 static struct image_partition_entry
alloc_image_partition(const char *name
, size_t len
) {
2403 struct image_partition_entry entry
= {name
, len
, malloc(len
)};
2405 error(1, errno
, "malloc");
2410 /** Frees an image partition */
2411 static void free_image_partition(struct image_partition_entry entry
) {
2415 static time_t source_date_epoch
= -1;
2416 static void set_source_date_epoch() {
2417 char *env
= getenv("SOURCE_DATE_EPOCH");
2421 source_date_epoch
= strtoull(env
, &endptr
, 10);
2422 if (errno
|| (endptr
&& *endptr
!= '\0')) {
2423 fprintf(stderr
, "Invalid SOURCE_DATE_EPOCH");
2429 /** Generates the partition-table partition */
2430 static struct image_partition_entry
make_partition_table(const struct flash_partition_entry
*p
) {
2431 struct image_partition_entry entry
= alloc_image_partition("partition-table", 0x800);
2433 char *s
= (char *)entry
.data
, *end
= (char *)(s
+entry
.size
);
2441 for (i
= 0; p
[i
].name
; i
++) {
2443 size_t w
= snprintf(s
, len
, "partition %s base 0x%05x size 0x%05x\n", p
[i
].name
, p
[i
].base
, p
[i
].size
);
2446 error(1, 0, "flash partition table overflow?");
2453 memset(s
, 0xff, end
-s
);
2459 /** Generates a binary-coded decimal representation of an integer in the range [0, 99] */
2460 static inline uint8_t bcd(uint8_t v
) {
2461 return 0x10 * (v
/10) + v
%10;
2465 /** Generates the soft-version partition */
2466 static struct image_partition_entry
make_soft_version(
2467 const struct device_info
*info
, uint32_t rev
)
2469 /** If an info string is provided, use this instead of
2470 * the structured data, and include the null-termination */
2471 if (info
->soft_ver
) {
2472 uint32_t len
= strlen(info
->soft_ver
) + 1;
2473 return init_meta_partition_entry("soft-version",
2474 info
->soft_ver
, len
, info
->part_trail
);
2479 if (source_date_epoch
!= -1)
2480 t
= source_date_epoch
;
2481 else if (time(&t
) == (time_t)(-1))
2482 error(1, errno
, "time");
2484 struct tm
*tm
= gmtime(&t
);
2486 struct soft_version s
= {
2493 .year_hi
= bcd((1900+tm
->tm_year
)/100),
2494 .year_lo
= bcd(tm
->tm_year
%100),
2495 .month
= bcd(tm
->tm_mon
+1),
2496 .day
= bcd(tm
->tm_mday
),
2498 .compat_level
= htonl(info
->soft_ver_compat_level
)
2501 if (info
->soft_ver_compat_level
== 0)
2502 return init_meta_partition_entry("soft-version", &s
,
2503 (uint8_t *)(&s
.compat_level
) - (uint8_t *)(&s
),
2506 return init_meta_partition_entry("soft-version", &s
,
2507 sizeof(s
), info
->part_trail
);
2510 /** Generates the support-list partition */
2511 static struct image_partition_entry
make_support_list(
2512 const struct device_info
*info
)
2514 uint32_t len
= strlen(info
->support_list
);
2515 return init_meta_partition_entry("support-list", info
->support_list
,
2516 len
, info
->part_trail
);
2519 /** Partition with extra-para data */
2520 static struct image_partition_entry
make_extra_para(
2521 const struct device_info
*info
, const uint8_t *extra_para
, size_t len
)
2523 return init_meta_partition_entry("extra-para", extra_para
, len
,
2527 /** Creates a new image partition with an arbitrary name from a file */
2528 static struct image_partition_entry
read_file(const char *part_name
, const char *filename
, bool add_jffs2_eof
, struct flash_partition_entry
*file_system_partition
) {
2529 struct stat statbuf
;
2531 if (stat(filename
, &statbuf
) < 0)
2532 error(1, errno
, "unable to stat file `%s'", filename
);
2534 size_t len
= statbuf
.st_size
;
2536 if (add_jffs2_eof
) {
2537 if (file_system_partition
)
2538 len
= ALIGN(len
+ file_system_partition
->base
, 0x10000) + sizeof(jffs2_eof_mark
) - file_system_partition
->base
;
2540 len
= ALIGN(len
, 0x10000) + sizeof(jffs2_eof_mark
);
2543 struct image_partition_entry entry
= alloc_image_partition(part_name
, len
);
2545 FILE *file
= fopen(filename
, "rb");
2547 error(1, errno
, "unable to open file `%s'", filename
);
2549 if (fread(entry
.data
, statbuf
.st_size
, 1, file
) != 1)
2550 error(1, errno
, "unable to read file `%s'", filename
);
2552 if (add_jffs2_eof
) {
2553 uint8_t *eof
= entry
.data
+ statbuf
.st_size
, *end
= entry
.data
+entry
.size
;
2555 memset(eof
, 0xff, end
- eof
- sizeof(jffs2_eof_mark
));
2556 memcpy(end
- sizeof(jffs2_eof_mark
), jffs2_eof_mark
, sizeof(jffs2_eof_mark
));
2565 Copies a list of image partitions into an image buffer and generates the image partition table while doing so
2567 Example image partition table:
2569 fwup-ptn partition-table base 0x00800 size 0x00800
2570 fwup-ptn os-image base 0x01000 size 0x113b45
2571 fwup-ptn file-system base 0x114b45 size 0x1d0004
2572 fwup-ptn support-list base 0x2e4b49 size 0x000d1
2574 Each line of the partition table is terminated with the bytes 09 0d 0a ("\t\r\n"),
2575 the end of the partition table is marked with a zero byte.
2577 The firmware image must contain at least the partition-table and support-list partitions
2578 to be accepted. There aren't any alignment constraints for the image partitions.
2580 The partition-table partition contains the actual flash layout; partitions
2581 from the image partition table are mapped to the corresponding flash partitions during
2582 the firmware upgrade. The support-list partition contains a list of devices supported by
2585 The base offsets in the firmware partition table are relative to the end
2586 of the vendor information block, so the partition-table partition will
2587 actually start at offset 0x1814 of the image.
2589 I think partition-table must be the first partition in the firmware image.
2591 static void put_partitions(uint8_t *buffer
, const struct flash_partition_entry
*flash_parts
, const struct image_partition_entry
*parts
) {
2593 char *image_pt
= (char *)buffer
, *end
= image_pt
+ 0x800;
2595 size_t base
= 0x800;
2596 for (i
= 0; parts
[i
].name
; i
++) {
2597 for (j
= 0; flash_parts
[j
].name
; j
++) {
2598 if (!strcmp(flash_parts
[j
].name
, parts
[i
].name
)) {
2599 if (parts
[i
].size
> flash_parts
[j
].size
)
2600 error(1, 0, "%s partition too big (more than %u bytes)", flash_parts
[j
].name
, (unsigned)flash_parts
[j
].size
);
2605 assert(flash_parts
[j
].name
);
2607 memcpy(buffer
+ base
, parts
[i
].data
, parts
[i
].size
);
2609 size_t len
= end
-image_pt
;
2610 size_t w
= snprintf(image_pt
, len
, "fwup-ptn %s base 0x%05x size 0x%05x\t\r\n", parts
[i
].name
, (unsigned)base
, (unsigned)parts
[i
].size
);
2613 error(1, 0, "image partition table overflow?");
2617 base
+= parts
[i
].size
;
2621 /** Generates and writes the image MD5 checksum */
2622 static void put_md5(uint8_t *md5
, uint8_t *buffer
, unsigned int len
) {
2626 MD5_Update(&ctx
, md5_salt
, (unsigned int)sizeof(md5_salt
));
2627 MD5_Update(&ctx
, buffer
, len
);
2628 MD5_Final(md5
, &ctx
);
2633 Generates the firmware image in factory format
2639 0000-0003 Image size (4 bytes, big endian)
2640 0004-0013 MD5 hash (hash of a 16 byte salt and the image data starting with byte 0x14)
2641 0014-0017 Vendor information length (without padding) (4 bytes, big endian)
2642 0018-1013 Vendor information (4092 bytes, padded with 0xff; there seem to be older
2643 (VxWorks-based) TP-LINK devices which use a smaller vendor information block)
2644 1014-1813 Image partition table (2048 bytes, padded with 0xff)
2645 1814-xxxx Firmware partitions
2647 static void * generate_factory_image(struct device_info
*info
, const struct image_partition_entry
*parts
, size_t *len
) {
2651 for (i
= 0; parts
[i
].name
; i
++)
2652 *len
+= parts
[i
].size
;
2654 uint8_t *image
= malloc(*len
);
2656 error(1, errno
, "malloc");
2658 memset(image
, 0xff, *len
);
2662 size_t vendor_len
= strlen(info
->vendor
);
2663 put32(image
+0x14, vendor_len
);
2664 memcpy(image
+0x18, info
->vendor
, vendor_len
);
2667 put_partitions(image
+ 0x1014, info
->partitions
, parts
);
2668 put_md5(image
+0x04, image
+0x14, *len
-0x14);
2674 Generates the firmware image in sysupgrade format
2676 This makes some assumptions about the provided flash and image partition tables and
2677 should be generalized when TP-LINK starts building its safeloader into hardware with
2678 different flash layouts.
2680 static void * generate_sysupgrade_image(struct device_info
*info
, const struct image_partition_entry
*image_parts
, size_t *len
) {
2682 size_t flash_first_partition_index
= 0;
2683 size_t flash_last_partition_index
= 0;
2684 const struct flash_partition_entry
*flash_first_partition
= NULL
;
2685 const struct flash_partition_entry
*flash_last_partition
= NULL
;
2686 const struct image_partition_entry
*image_last_partition
= NULL
;
2688 /** Find first and last partitions */
2689 for (i
= 0; info
->partitions
[i
].name
; i
++) {
2690 if (!strcmp(info
->partitions
[i
].name
, info
->first_sysupgrade_partition
)) {
2691 flash_first_partition
= &info
->partitions
[i
];
2692 flash_first_partition_index
= i
;
2693 } else if (!strcmp(info
->partitions
[i
].name
, info
->last_sysupgrade_partition
)) {
2694 flash_last_partition
= &info
->partitions
[i
];
2695 flash_last_partition_index
= i
;
2699 assert(flash_first_partition
&& flash_last_partition
);
2700 assert(flash_first_partition_index
< flash_last_partition_index
);
2702 /** Find last partition from image to calculate needed size */
2703 for (i
= 0; image_parts
[i
].name
; i
++) {
2704 if (!strcmp(image_parts
[i
].name
, info
->last_sysupgrade_partition
)) {
2705 image_last_partition
= &image_parts
[i
];
2710 assert(image_last_partition
);
2712 *len
= flash_last_partition
->base
- flash_first_partition
->base
+ image_last_partition
->size
;
2714 uint8_t *image
= malloc(*len
);
2716 error(1, errno
, "malloc");
2718 memset(image
, 0xff, *len
);
2720 for (i
= flash_first_partition_index
; i
<= flash_last_partition_index
; i
++) {
2721 for (j
= 0; image_parts
[j
].name
; j
++) {
2722 if (!strcmp(info
->partitions
[i
].name
, image_parts
[j
].name
)) {
2723 if (image_parts
[j
].size
> info
->partitions
[i
].size
)
2724 error(1, 0, "%s partition too big (more than %u bytes)", info
->partitions
[i
].name
, (unsigned)info
->partitions
[i
].size
);
2725 memcpy(image
+ info
->partitions
[i
].base
- flash_first_partition
->base
, image_parts
[j
].data
, image_parts
[j
].size
);
2729 assert(image_parts
[j
].name
);
2736 /** Generates an image according to a given layout and writes it to a file */
2737 static void build_image(const char *output
,
2738 const char *kernel_image
,
2739 const char *rootfs_image
,
2743 struct device_info
*info
) {
2747 struct image_partition_entry parts
[7] = {};
2749 struct flash_partition_entry
*firmware_partition
= NULL
;
2750 struct flash_partition_entry
*os_image_partition
= NULL
;
2751 struct flash_partition_entry
*file_system_partition
= NULL
;
2752 size_t firmware_partition_index
= 0;
2754 for (i
= 0; info
->partitions
[i
].name
; i
++) {
2755 if (!strcmp(info
->partitions
[i
].name
, "firmware"))
2757 firmware_partition
= &info
->partitions
[i
];
2758 firmware_partition_index
= i
;
2762 if (firmware_partition
)
2764 os_image_partition
= &info
->partitions
[firmware_partition_index
];
2765 file_system_partition
= &info
->partitions
[firmware_partition_index
+ 1];
2768 if (stat(kernel_image
, &kernel
) < 0)
2769 error(1, errno
, "unable to stat file `%s'", kernel_image
);
2771 if (kernel
.st_size
> firmware_partition
->size
)
2772 error(1, 0, "kernel overflowed firmware partition\n");
2774 for (i
= MAX_PARTITIONS
-1; i
>= firmware_partition_index
+ 1; i
--)
2775 info
->partitions
[i
+1] = info
->partitions
[i
];
2777 file_system_partition
->name
= "file-system";
2778 file_system_partition
->base
= firmware_partition
->base
+ kernel
.st_size
;
2780 /* Align partition start to erase blocks for factory images only */
2782 file_system_partition
->base
= ALIGN(firmware_partition
->base
+ kernel
.st_size
, 0x10000);
2784 file_system_partition
->size
= firmware_partition
->size
- file_system_partition
->base
;
2786 os_image_partition
->name
= "os-image";
2787 os_image_partition
->size
= kernel
.st_size
;
2790 parts
[0] = make_partition_table(info
->partitions
);
2791 parts
[1] = make_soft_version(info
, rev
);
2792 parts
[2] = make_support_list(info
);
2793 parts
[3] = read_file("os-image", kernel_image
, false, NULL
);
2794 parts
[4] = read_file("file-system", rootfs_image
, add_jffs2_eof
, file_system_partition
);
2796 /* Some devices need the extra-para partition to accept the firmware */
2797 if (strcasecmp(info
->id
, "ARCHER-A7-V5") == 0 ||
2798 strcasecmp(info
->id
, "ARCHER-C2-V3") == 0 ||
2799 strcasecmp(info
->id
, "ARCHER-C7-V4") == 0 ||
2800 strcasecmp(info
->id
, "ARCHER-C7-V5") == 0 ||
2801 strcasecmp(info
->id
, "ARCHER-C25-V1") == 0 ||
2802 strcasecmp(info
->id
, "ARCHER-C59-V2") == 0 ||
2803 strcasecmp(info
->id
, "ARCHER-C60-V2") == 0 ||
2804 strcasecmp(info
->id
, "ARCHER-C60-V3") == 0 ||
2805 strcasecmp(info
->id
, "TLWR1043NV5") == 0) {
2806 const uint8_t extra_para
[2] = {0x01, 0x00};
2807 parts
[5] = make_extra_para(info
, extra_para
,
2808 sizeof(extra_para
));
2809 } else if (strcasecmp(info
->id
, "ARCHER-C6-V2") == 0) {
2810 const uint8_t extra_para
[2] = {0x00, 0x01};
2811 parts
[5] = make_extra_para(info
, extra_para
,
2812 sizeof(extra_para
));
2813 } else if (strcasecmp(info
->id
, "ARCHER-C6-V2-US") == 0 ||
2814 strcasecmp(info
->id
, "EAP245-V3") == 0) {
2815 const uint8_t extra_para
[2] = {0x01, 0x01};
2816 parts
[5] = make_extra_para(info
, extra_para
,
2817 sizeof(extra_para
));
2823 image
= generate_sysupgrade_image(info
, parts
, &len
);
2825 image
= generate_factory_image(info
, parts
, &len
);
2827 FILE *file
= fopen(output
, "wb");
2829 error(1, errno
, "unable to open output file");
2831 if (fwrite(image
, len
, 1, file
) != 1)
2832 error(1, 0, "unable to write output file");
2838 for (i
= 0; parts
[i
].name
; i
++)
2839 free_image_partition(parts
[i
]);
2843 static void usage(const char *argv0
) {
2845 "Usage: %s [OPTIONS...]\n"
2848 " -h show this help\n"
2850 "Create a new image:\n"
2851 " -B <board> create image for the board specified with <board>\n"
2852 " -k <file> read kernel image from the file <file>\n"
2853 " -r <file> read rootfs image from the file <file>\n"
2854 " -o <file> write output to the file <file>\n"
2855 " -V <rev> sets the revision number to <rev>\n"
2856 " -j add jffs2 end-of-filesystem markers\n"
2857 " -S create sysupgrade instead of factory image\n"
2858 "Extract an old image:\n"
2859 " -x <file> extract all oem firmware partition\n"
2860 " -d <dir> destination to extract the firmware partition\n"
2861 " -z <file> convert an oem firmware into a sysupgade file. Use -o for output file\n",
2867 static struct device_info
*find_board(const char *id
)
2869 struct device_info
*board
= NULL
;
2871 for (board
= boards
; board
->id
!= NULL
; board
++)
2872 if (strcasecmp(id
, board
->id
) == 0)
2878 static int add_flash_partition(
2879 struct flash_partition_entry
*part_list
,
2886 /* check if the list has a free entry */
2887 for (ptr
= 0; ptr
< max_entries
; ptr
++, part_list
++) {
2888 if (part_list
->name
== NULL
&&
2889 part_list
->base
== 0 &&
2890 part_list
->size
== 0)
2894 if (ptr
== max_entries
) {
2895 error(1, 0, "No free flash part entry available.");
2898 part_list
->name
= calloc(1, strlen(name
) + 1);
2899 if (!part_list
->name
) {
2900 error(1, 0, "Unable to allocate memory");
2903 memcpy((char *)part_list
->name
, name
, strlen(name
));
2904 part_list
->base
= base
;
2905 part_list
->size
= size
;
2910 /** read the partition table into struct flash_partition_entry */
2911 static int read_partition_table(
2912 FILE *file
, long offset
,
2913 struct flash_partition_entry
*entries
, size_t max_entries
,
2918 const char *parthdr
= NULL
;
2919 const char *fwuphdr
= "fwup-ptn";
2920 const char *flashhdr
= "partition";
2922 /* TODO: search for the partition table */
2932 error(1, 0, "Invalid partition table");
2935 if (fseek(file
, offset
, SEEK_SET
) < 0)
2936 error(1, errno
, "Can not seek in the firmware");
2938 if (fread(buf
, 2048, 1, file
) != 1)
2939 error(1, errno
, "Can not read fwup-ptn from the firmware");
2943 /* look for the partition header */
2944 if (memcmp(buf
, parthdr
, strlen(parthdr
)) != 0) {
2945 fprintf(stderr
, "DEBUG: can not find fwuphdr\n");
2950 end
= buf
+ sizeof(buf
);
2951 while ((ptr
+ strlen(parthdr
)) < end
&&
2952 memcmp(ptr
, parthdr
, strlen(parthdr
)) == 0) {
2956 char name
[32] = { 0 };
2958 unsigned long base
= 0;
2959 unsigned long size
= 0;
2961 end_part
= memchr(ptr
, '\n', (end
- ptr
));
2962 if (end_part
== NULL
) {
2963 /* in theory this should never happen, because a partition always ends with 0x09, 0x0D, 0x0A */
2967 for (int i
= 0; i
<= 4; i
++) {
2968 if (end_part
<= ptr
)
2971 end_element
= memchr(ptr
, 0x20, (end_part
- ptr
));
2972 if (end_element
== NULL
) {
2973 error(1, errno
, "Ignoring the rest of the partition entries.");
2978 /* partition header */
2980 ptr
= end_element
+ 1;
2984 name_len
= (end_element
- ptr
) > 31 ? 31 : (end_element
- ptr
);
2985 strncpy(name
, ptr
, name_len
);
2986 name
[name_len
] = '\0';
2987 ptr
= end_element
+ 1;
2992 ptr
= end_element
+ 1;
2997 base
= strtoul(ptr
, NULL
, 16);
2998 ptr
= end_element
+ 1;
3003 ptr
= end_element
+ 1;
3004 /* actual size. The last element doesn't have a sepeartor */
3005 size
= strtoul(ptr
, NULL
, 16);
3006 /* the part ends with 0x09, 0x0d, 0x0a */
3008 add_flash_partition(entries
, max_entries
, name
, base
, size
);
3017 static void write_partition(
3019 size_t firmware_offset
,
3020 struct flash_partition_entry
*entry
,
3026 fseek(input_file
, entry
->base
+ firmware_offset
, SEEK_SET
);
3028 for (offset
= 0; sizeof(buf
) + offset
<= entry
->size
; offset
+= sizeof(buf
)) {
3029 if (fread(buf
, sizeof(buf
), 1, input_file
) != 1)
3030 error(1, errno
, "Can not read partition from input_file");
3032 if (fwrite(buf
, sizeof(buf
), 1, output_file
) != 1)
3033 error(1, errno
, "Can not write partition to output_file");
3035 /* write last chunk smaller than buffer */
3036 if (offset
< entry
->size
) {
3037 offset
= entry
->size
- offset
;
3038 if (fread(buf
, offset
, 1, input_file
) != 1)
3039 error(1, errno
, "Can not read partition from input_file");
3040 if (fwrite(buf
, offset
, 1, output_file
) != 1)
3041 error(1, errno
, "Can not write partition to output_file");
3045 static int extract_firmware_partition(FILE *input_file
, size_t firmware_offset
, struct flash_partition_entry
*entry
, const char *output_directory
)
3048 char output
[PATH_MAX
];
3050 snprintf(output
, PATH_MAX
, "%s/%s", output_directory
, entry
->name
);
3051 output_file
= fopen(output
, "wb+");
3052 if (output_file
== NULL
) {
3053 error(1, errno
, "Can not open output file %s", output
);
3056 write_partition(input_file
, firmware_offset
, entry
, output_file
);
3058 fclose(output_file
);
3063 /** extract all partitions from the firmware file */
3064 static int extract_firmware(const char *input
, const char *output_directory
)
3066 struct flash_partition_entry entries
[16] = { 0 };
3067 size_t max_entries
= 16;
3068 size_t firmware_offset
= 0x1014;
3071 struct stat statbuf
;
3073 /* check input file */
3074 if (stat(input
, &statbuf
)) {
3075 error(1, errno
, "Can not read input firmware %s", input
);
3078 /* check if output directory exists */
3079 if (stat(output_directory
, &statbuf
)) {
3080 error(1, errno
, "Failed to stat output directory %s", output_directory
);
3083 if ((statbuf
.st_mode
& S_IFMT
) != S_IFDIR
) {
3084 error(1, errno
, "Given output directory is not a directory %s", output_directory
);
3087 input_file
= fopen(input
, "rb");
3089 if (read_partition_table(input_file
, firmware_offset
, entries
, 16, 0) != 0) {
3090 error(1, 0, "Error can not read the partition table (fwup-ptn)");
3093 for (size_t i
= 0; i
< max_entries
; i
++) {
3094 if (entries
[i
].name
== NULL
&&
3095 entries
[i
].base
== 0 &&
3096 entries
[i
].size
== 0)
3099 extract_firmware_partition(input_file
, firmware_offset
, &entries
[i
], output_directory
);
3105 static struct flash_partition_entry
*find_partition(
3106 struct flash_partition_entry
*entries
, size_t max_entries
,
3107 const char *name
, const char *error_msg
)
3109 for (size_t i
= 0; i
< max_entries
; i
++, entries
++) {
3110 if (strcmp(entries
->name
, name
) == 0)
3114 error(1, 0, "%s", error_msg
);
3118 static void write_ff(FILE *output_file
, size_t size
)
3123 memset(buf
, 0xff, sizeof(buf
));
3125 for (offset
= 0; offset
+ sizeof(buf
) < size
; offset
+= sizeof(buf
)) {
3126 if (fwrite(buf
, sizeof(buf
), 1, output_file
) != 1)
3127 error(1, errno
, "Can not write 0xff to output_file");
3130 /* write last chunk smaller than buffer */
3131 if (offset
< size
) {
3132 offset
= size
- offset
;
3133 if (fwrite(buf
, offset
, 1, output_file
) != 1)
3134 error(1, errno
, "Can not write partition to output_file");
3138 static void convert_firmware(const char *input
, const char *output
)
3140 struct flash_partition_entry fwup
[MAX_PARTITIONS
] = { 0 };
3141 struct flash_partition_entry flash
[MAX_PARTITIONS
] = { 0 };
3142 struct flash_partition_entry
*fwup_os_image
= NULL
, *fwup_file_system
= NULL
;
3143 struct flash_partition_entry
*flash_os_image
= NULL
, *flash_file_system
= NULL
;
3144 struct flash_partition_entry
*fwup_partition_table
= NULL
;
3145 size_t firmware_offset
= 0x1014;
3146 FILE *input_file
, *output_file
;
3148 struct stat statbuf
;
3150 /* check input file */
3151 if (stat(input
, &statbuf
)) {
3152 error(1, errno
, "Can not read input firmware %s", input
);
3155 input_file
= fopen(input
, "rb");
3157 error(1, 0, "Can not open input firmware %s", input
);
3159 output_file
= fopen(output
, "wb");
3161 error(1, 0, "Can not open output firmware %s", output
);
3163 if (read_partition_table(input_file
, firmware_offset
, fwup
, MAX_PARTITIONS
, 0) != 0) {
3164 error(1, 0, "Error can not read the partition table (fwup-ptn)");
3167 fwup_os_image
= find_partition(fwup
, MAX_PARTITIONS
,
3168 "os-image", "Error can not find os-image partition (fwup)");
3169 fwup_file_system
= find_partition(fwup
, MAX_PARTITIONS
,
3170 "file-system", "Error can not find file-system partition (fwup)");
3171 fwup_partition_table
= find_partition(fwup
, MAX_PARTITIONS
,
3172 "partition-table", "Error can not find partition-table partition");
3174 /* the flash partition table has a 0x00000004 magic haeder */
3175 if (read_partition_table(input_file
, firmware_offset
+ fwup_partition_table
->base
+ 4, flash
, MAX_PARTITIONS
, 1) != 0)
3176 error(1, 0, "Error can not read the partition table (flash)");
3178 flash_os_image
= find_partition(flash
, MAX_PARTITIONS
,
3179 "os-image", "Error can not find os-image partition (flash)");
3180 flash_file_system
= find_partition(flash
, MAX_PARTITIONS
,
3181 "file-system", "Error can not find file-system partition (flash)");
3183 /* write os_image to 0x0 */
3184 write_partition(input_file
, firmware_offset
, fwup_os_image
, output_file
);
3185 write_ff(output_file
, flash_os_image
->size
- fwup_os_image
->size
);
3187 /* write file-system behind os_image */
3188 fseek(output_file
, flash_file_system
->base
- flash_os_image
->base
, SEEK_SET
);
3189 write_partition(input_file
, firmware_offset
, fwup_file_system
, output_file
);
3190 write_ff(output_file
, flash_file_system
->size
- fwup_file_system
->size
);
3192 fclose(output_file
);
3196 int main(int argc
, char *argv
[]) {
3197 const char *board
= NULL
, *kernel_image
= NULL
, *rootfs_image
= NULL
, *output
= NULL
;
3198 const char *extract_image
= NULL
, *output_directory
= NULL
, *convert_image
= NULL
;
3199 bool add_jffs2_eof
= false, sysupgrade
= false;
3201 struct device_info
*info
;
3202 set_source_date_epoch();
3207 c
= getopt(argc
, argv
, "B:k:r:o:V:jSh:x:d:z:");
3217 kernel_image
= optarg
;
3221 rootfs_image
= optarg
;
3229 sscanf(optarg
, "r%u", &rev
);
3233 add_jffs2_eof
= true;
3245 output_directory
= optarg
;
3249 extract_image
= optarg
;
3253 convert_image
= optarg
;
3262 if (extract_image
|| output_directory
) {
3264 error(1, 0, "No factory/oem image given via -x <file>. Output directory is only valid with -x");
3265 if (!output_directory
)
3266 error(1, 0, "Can not extract an image without output directory. Use -d <dir>");
3267 extract_firmware(extract_image
, output_directory
);
3268 } else if (convert_image
) {
3270 error(1, 0, "Can not convert a factory/oem image into sysupgrade image without output file. Use -o <file>");
3271 convert_firmware(convert_image
, output
);
3274 error(1, 0, "no board has been specified");
3276 error(1, 0, "no kernel image has been specified");
3278 error(1, 0, "no rootfs image has been specified");
3280 error(1, 0, "no output filename has been specified");
3282 info
= find_board(board
);
3285 error(1, 0, "unsupported board %s", board
);
3287 build_image(output
, kernel_image
, rootfs_image
, rev
, add_jffs2_eof
, sysupgrade
, info
);