2 Copyright (c) 2014, Matthias Schiffer <mschiffer@universe-factory.net>
5 Redistribution and use in source and binary forms, with or without
6 modification, are permitted provided that the following conditions are met:
8 1. Redistributions of source code must retain the above copyright notice,
9 this list of conditions and the following disclaimer.
10 2. Redistributions in binary form must reproduce the above copyright notice,
11 this list of conditions and the following disclaimer in the documentation
12 and/or other materials provided with the distribution.
14 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
15 AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16 IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
17 DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
18 FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19 DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
20 SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
21 CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
22 OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
23 OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
30 Image generation tool for the TP-LINK SafeLoader as seen on
31 TP-LINK Pharos devices (CPE210/220/510/520)
47 #include <arpa/inet.h>
49 #include <sys/types.h>
56 #define ALIGN(x,a) ({ typeof(a) __a = (a); (((x) + __a - 1) & ~(__a - 1)); })
59 #define MAX_PARTITIONS 32
61 /** An image partition table entry */
62 struct image_partition_entry
{
68 /** A flash partition table entry */
69 struct flash_partition_entry
{
75 /** Partition trailing padding definitions
76 * Values 0x00 to 0xff are reserved to indicate the padding value
77 * Values from 0x100 are reserved to indicate other behaviour */
78 enum partition_trail_value
{
81 PART_TRAIL_MAX
= 0xff,
82 PART_TRAIL_NONE
= 0x100
85 /** Firmware layout description */
89 const char *support_list
;
90 enum partition_trail_value part_trail
;
92 uint32_t soft_ver_compat_level
;
93 struct flash_partition_entry partitions
[MAX_PARTITIONS
+1];
94 const char *first_sysupgrade_partition
;
95 const char *last_sysupgrade_partition
;
98 struct __attribute__((__packed__
)) meta_header
{
103 /** The content of the soft-version structure */
104 struct __attribute__((__packed__
)) soft_version
{
106 uint8_t version_major
;
107 uint8_t version_minor
;
108 uint8_t version_patch
;
114 uint32_t compat_level
;
118 static const uint8_t jffs2_eof_mark
[4] = {0xde, 0xad, 0xc0, 0xde};
122 Salt for the MD5 hash
124 Fortunately, TP-LINK seems to use the same salt for most devices which use
125 the new image format.
127 static const uint8_t md5_salt
[16] = {
128 0x7a, 0x2b, 0x15, 0xed,
129 0x9b, 0x98, 0x59, 0x6d,
130 0xe5, 0x04, 0xab, 0x44,
131 0xac, 0x2a, 0x9f, 0x4e,
135 /** Firmware layout table */
136 static struct device_info boards
[] = {
137 /** Firmware layout for the CPE210/220 V1 */
140 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
143 "CPE210(TP-LINK|UN|N300-2):1.0\r\n"
144 "CPE210(TP-LINK|UN|N300-2):1.1\r\n"
145 "CPE210(TP-LINK|US|N300-2):1.1\r\n"
146 "CPE210(TP-LINK|EU|N300-2):1.1\r\n"
147 "CPE220(TP-LINK|UN|N300-2):1.1\r\n"
148 "CPE220(TP-LINK|US|N300-2):1.1\r\n"
149 "CPE220(TP-LINK|EU|N300-2):1.1\r\n",
154 {"fs-uboot", 0x00000, 0x20000},
155 {"partition-table", 0x20000, 0x02000},
156 {"default-mac", 0x30000, 0x00020},
157 {"product-info", 0x31100, 0x00100},
158 {"signature", 0x32000, 0x00400},
159 {"os-image", 0x40000, 0x300000},
160 {"file-system", 0x340000, 0x470000},
161 {"soft-version", 0x7b0000, 0x00100},
162 {"support-list", 0x7b1000, 0x00400},
163 {"user-config", 0x7c0000, 0x10000},
164 {"default-config", 0x7d0000, 0x10000},
165 {"log", 0x7e0000, 0x10000},
166 {"radio", 0x7f0000, 0x10000},
170 .first_sysupgrade_partition
= "os-image",
171 .last_sysupgrade_partition
= "support-list",
174 /** Firmware layout for the CPE210 V2 */
177 .vendor
= "CPE210(TP-LINK|UN|N300-2|00000000):2.0\r\n",
180 "CPE210(TP-LINK|EU|N300-2|00000000):2.0\r\n"
181 "CPE210(TP-LINK|EU|N300-2|45550000):2.0\r\n"
182 "CPE210(TP-LINK|EU|N300-2|55530000):2.0\r\n"
183 "CPE210(TP-LINK|UN|N300-2|00000000):2.0\r\n"
184 "CPE210(TP-LINK|UN|N300-2|45550000):2.0\r\n"
185 "CPE210(TP-LINK|UN|N300-2|55530000):2.0\r\n"
186 "CPE210(TP-LINK|US|N300-2|55530000):2.0\r\n"
187 "CPE210(TP-LINK|UN|N300-2):2.0\r\n"
188 "CPE210(TP-LINK|EU|N300-2):2.0\r\n"
189 "CPE210(TP-LINK|US|N300-2):2.0\r\n",
194 {"fs-uboot", 0x00000, 0x20000},
195 {"partition-table", 0x20000, 0x02000},
196 {"default-mac", 0x30000, 0x00020},
197 {"product-info", 0x31100, 0x00100},
198 {"device-info", 0x31400, 0x00400},
199 {"signature", 0x32000, 0x00400},
200 {"device-id", 0x33000, 0x00100},
201 {"firmware", 0x40000, 0x770000},
202 {"soft-version", 0x7b0000, 0x00100},
203 {"support-list", 0x7b1000, 0x01000},
204 {"user-config", 0x7c0000, 0x10000},
205 {"default-config", 0x7d0000, 0x10000},
206 {"log", 0x7e0000, 0x10000},
207 {"radio", 0x7f0000, 0x10000},
211 .first_sysupgrade_partition
= "os-image",
212 .last_sysupgrade_partition
= "support-list",
215 /** Firmware layout for the CPE210 V3 */
218 .vendor
= "CPE210(TP-LINK|UN|N300-2|00000000):3.0\r\n",
221 "CPE210(TP-LINK|EU|N300-2|45550000):3.0\r\n"
222 "CPE210(TP-LINK|UN|N300-2|00000000):3.0\r\n"
223 "CPE210(TP-LINK|US|N300-2|55530000):3.0\r\n"
224 "CPE210(TP-LINK|UN|N300-2):3.0\r\n"
225 "CPE210(TP-LINK|EU|N300-2):3.0\r\n"
226 "CPE210(TP-LINK|EU|N300-2|45550000):3.1\r\n"
227 "CPE210(TP-LINK|UN|N300-2|00000000):3.1\r\n"
228 "CPE210(TP-LINK|US|N300-2|55530000):3.1\r\n"
229 "CPE210(TP-LINK|EU|N300-2|45550000):3.20\r\n"
230 "CPE210(TP-LINK|UN|N300-2|00000000):3.20\r\n"
231 "CPE210(TP-LINK|US|N300-2|55530000):3.20\r\n",
236 {"fs-uboot", 0x00000, 0x20000},
237 {"partition-table", 0x20000, 0x01000},
238 {"default-mac", 0x30000, 0x00020},
239 {"product-info", 0x31100, 0x00100},
240 {"device-info", 0x31400, 0x00400},
241 {"signature", 0x32000, 0x00400},
242 {"device-id", 0x33000, 0x00100},
243 {"firmware", 0x40000, 0x770000},
244 {"soft-version", 0x7b0000, 0x00100},
245 {"support-list", 0x7b1000, 0x01000},
246 {"user-config", 0x7c0000, 0x10000},
247 {"default-config", 0x7d0000, 0x10000},
248 {"log", 0x7e0000, 0x10000},
249 {"radio", 0x7f0000, 0x10000},
253 .first_sysupgrade_partition
= "os-image",
254 .last_sysupgrade_partition
= "support-list",
257 /** Firmware layout for the CPE220 V2 */
260 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
263 "CPE220(TP-LINK|EU|N300-2|00000000):2.0\r\n"
264 "CPE220(TP-LINK|EU|N300-2|45550000):2.0\r\n"
265 "CPE220(TP-LINK|EU|N300-2|55530000):2.0\r\n"
266 "CPE220(TP-LINK|UN|N300-2|00000000):2.0\r\n"
267 "CPE220(TP-LINK|UN|N300-2|45550000):2.0\r\n"
268 "CPE220(TP-LINK|UN|N300-2|55530000):2.0\r\n"
269 "CPE220(TP-LINK|US|N300-2|55530000):2.0\r\n"
270 "CPE220(TP-LINK|UN|N300-2):2.0\r\n"
271 "CPE220(TP-LINK|EU|N300-2):2.0\r\n"
272 "CPE220(TP-LINK|US|N300-2):2.0\r\n",
277 {"fs-uboot", 0x00000, 0x20000},
278 {"partition-table", 0x20000, 0x02000},
279 {"default-mac", 0x30000, 0x00020},
280 {"product-info", 0x31100, 0x00100},
281 {"signature", 0x32000, 0x00400},
282 {"os-image", 0x40000, 0x300000},
283 {"file-system", 0x340000, 0x470000},
284 {"soft-version", 0x7b0000, 0x00100},
285 {"support-list", 0x7b1000, 0x00400},
286 {"user-config", 0x7c0000, 0x10000},
287 {"default-config", 0x7d0000, 0x10000},
288 {"log", 0x7e0000, 0x10000},
289 {"radio", 0x7f0000, 0x10000},
293 .first_sysupgrade_partition
= "os-image",
294 .last_sysupgrade_partition
= "support-list",
297 /** Firmware layout for the CPE220 V3 */
300 .vendor
= "CPE220(TP-LINK|UN|N300-2|00000000):3.0\r\n",
303 "CPE220(TP-LINK|EU|N300-2|00000000):3.0\r\n"
304 "CPE220(TP-LINK|EU|N300-2|45550000):3.0\r\n"
305 "CPE220(TP-LINK|EU|N300-2|55530000):3.0\r\n"
306 "CPE220(TP-LINK|UN|N300-2|00000000):3.0\r\n"
307 "CPE220(TP-LINK|UN|N300-2|45550000):3.0\r\n"
308 "CPE220(TP-LINK|UN|N300-2|55530000):3.0\r\n"
309 "CPE220(TP-LINK|US|N300-2|55530000):3.0\r\n"
310 "CPE220(TP-LINK|UN|N300-2):3.0\r\n"
311 "CPE220(TP-LINK|EU|N300-2):3.0\r\n"
312 "CPE220(TP-LINK|US|N300-2):3.0\r\n",
317 {"fs-uboot", 0x00000, 0x20000},
318 {"partition-table", 0x20000, 0x02000},
319 {"default-mac", 0x30000, 0x00020},
320 {"product-info", 0x31100, 0x00100},
321 {"device-info", 0x31400, 0x00400},
322 {"signature", 0x32000, 0x00400},
323 {"device-id", 0x33000, 0x00100},
324 {"firmware", 0x40000, 0x770000},
325 {"soft-version", 0x7b0000, 0x00100},
326 {"support-list", 0x7b1000, 0x01000},
327 {"user-config", 0x7c0000, 0x10000},
328 {"default-config", 0x7d0000, 0x10000},
329 {"log", 0x7e0000, 0x10000},
330 {"radio", 0x7f0000, 0x10000},
334 .first_sysupgrade_partition
= "os-image",
335 .last_sysupgrade_partition
= "support-list",
338 /** Firmware layout for the CPE510/520 V1 */
341 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
344 "CPE510(TP-LINK|UN|N300-5):1.0\r\n"
345 "CPE510(TP-LINK|UN|N300-5):1.1\r\n"
346 "CPE510(TP-LINK|UN|N300-5):1.1\r\n"
347 "CPE510(TP-LINK|US|N300-5):1.1\r\n"
348 "CPE510(TP-LINK|EU|N300-5):1.1\r\n"
349 "CPE520(TP-LINK|UN|N300-5):1.1\r\n"
350 "CPE520(TP-LINK|US|N300-5):1.1\r\n"
351 "CPE520(TP-LINK|EU|N300-5):1.1\r\n",
356 {"fs-uboot", 0x00000, 0x20000},
357 {"partition-table", 0x20000, 0x02000},
358 {"default-mac", 0x30000, 0x00020},
359 {"product-info", 0x31100, 0x00100},
360 {"signature", 0x32000, 0x00400},
361 {"os-image", 0x40000, 0x300000},
362 {"file-system", 0x340000, 0x470000},
363 {"soft-version", 0x7b0000, 0x00100},
364 {"support-list", 0x7b1000, 0x00400},
365 {"user-config", 0x7c0000, 0x10000},
366 {"default-config", 0x7d0000, 0x10000},
367 {"log", 0x7e0000, 0x10000},
368 {"radio", 0x7f0000, 0x10000},
372 .first_sysupgrade_partition
= "os-image",
373 .last_sysupgrade_partition
= "support-list",
376 /** Firmware layout for the CPE510 V2 */
379 .vendor
= "CPE510(TP-LINK|UN|N300-5):2.0\r\n",
382 "CPE510(TP-LINK|EU|N300-5|00000000):2.0\r\n"
383 "CPE510(TP-LINK|EU|N300-5|45550000):2.0\r\n"
384 "CPE510(TP-LINK|EU|N300-5|55530000):2.0\r\n"
385 "CPE510(TP-LINK|UN|N300-5|00000000):2.0\r\n"
386 "CPE510(TP-LINK|UN|N300-5|45550000):2.0\r\n"
387 "CPE510(TP-LINK|UN|N300-5|55530000):2.0\r\n"
388 "CPE510(TP-LINK|US|N300-5|00000000):2.0\r\n"
389 "CPE510(TP-LINK|US|N300-5|45550000):2.0\r\n"
390 "CPE510(TP-LINK|US|N300-5|55530000):2.0\r\n"
391 "CPE510(TP-LINK|UN|N300-5):2.0\r\n"
392 "CPE510(TP-LINK|EU|N300-5):2.0\r\n"
393 "CPE510(TP-LINK|US|N300-5):2.0\r\n",
398 {"fs-uboot", 0x00000, 0x20000},
399 {"partition-table", 0x20000, 0x02000},
400 {"default-mac", 0x30000, 0x00020},
401 {"product-info", 0x31100, 0x00100},
402 {"signature", 0x32000, 0x00400},
403 {"os-image", 0x40000, 0x300000},
404 {"file-system", 0x340000, 0x470000},
405 {"soft-version", 0x7b0000, 0x00100},
406 {"support-list", 0x7b1000, 0x00400},
407 {"user-config", 0x7c0000, 0x10000},
408 {"default-config", 0x7d0000, 0x10000},
409 {"log", 0x7e0000, 0x10000},
410 {"radio", 0x7f0000, 0x10000},
414 .first_sysupgrade_partition
= "os-image",
415 .last_sysupgrade_partition
= "support-list",
418 /** Firmware layout for the CPE510 V3 */
421 .vendor
= "CPE510(TP-LINK|UN|N300-5):3.0\r\n",
424 "CPE510(TP-LINK|EU|N300-5|00000000):3.0\r\n"
425 "CPE510(TP-LINK|EU|N300-5|45550000):3.0\r\n"
426 "CPE510(TP-LINK|EU|N300-5|55530000):3.0\r\n"
427 "CPE510(TP-LINK|UN|N300-5|00000000):3.0\r\n"
428 "CPE510(TP-LINK|UN|N300-5|45550000):3.0\r\n"
429 "CPE510(TP-LINK|UN|N300-5|55530000):3.0\r\n"
430 "CPE510(TP-LINK|US|N300-5|00000000):3.0\r\n"
431 "CPE510(TP-LINK|US|N300-5|45550000):3.0\r\n"
432 "CPE510(TP-LINK|US|N300-5|55530000):3.0\r\n"
433 "CPE510(TP-LINK|UN|N300-5):3.0\r\n"
434 "CPE510(TP-LINK|EU|N300-5):3.0\r\n"
435 "CPE510(TP-LINK|US|N300-5):3.0\r\n"
436 "CPE510(TP-LINK|UN|N300-5|00000000):3.20\r\n"
437 "CPE510(TP-LINK|US|N300-5|55530000):3.20\r\n"
438 "CPE510(TP-LINK|EU|N300-5|45550000):3.20\r\n",
443 {"fs-uboot", 0x00000, 0x20000},
444 {"partition-table", 0x20000, 0x02000},
445 {"default-mac", 0x30000, 0x00020},
446 {"product-info", 0x31100, 0x00100},
447 {"signature", 0x32000, 0x00400},
448 {"os-image", 0x40000, 0x300000},
449 {"file-system", 0x340000, 0x470000},
450 {"soft-version", 0x7b0000, 0x00100},
451 {"support-list", 0x7b1000, 0x00400},
452 {"user-config", 0x7c0000, 0x10000},
453 {"default-config", 0x7d0000, 0x10000},
454 {"log", 0x7e0000, 0x10000},
455 {"radio", 0x7f0000, 0x10000},
459 .first_sysupgrade_partition
= "os-image",
460 .last_sysupgrade_partition
= "support-list",
463 /** Firmware layout for the CPE610V1 */
466 .vendor
= "CPE610(TP-LINK|UN|N300-5|00000000):1.0\r\n",
469 "CPE610(TP-LINK|EU|N300-5|00000000):1.0\r\n"
470 "CPE610(TP-LINK|EU|N300-5|45550000):1.0\r\n"
471 "CPE610(TP-LINK|EU|N300-5|55530000):1.0\r\n"
472 "CPE610(TP-LINK|UN|N300-5|00000000):1.0\r\n"
473 "CPE610(TP-LINK|UN|N300-5|45550000):1.0\r\n"
474 "CPE610(TP-LINK|UN|N300-5|55530000):1.0\r\n"
475 "CPE610(TP-LINK|US|N300-5|55530000):1.0\r\n"
476 "CPE610(TP-LINK|UN|N300-5):1.0\r\n"
477 "CPE610(TP-LINK|EU|N300-5):1.0\r\n"
478 "CPE610(TP-LINK|US|N300-5):1.0\r\n",
483 {"fs-uboot", 0x00000, 0x20000},
484 {"partition-table", 0x20000, 0x02000},
485 {"default-mac", 0x30000, 0x00020},
486 {"product-info", 0x31100, 0x00100},
487 {"signature", 0x32000, 0x00400},
488 {"os-image", 0x40000, 0x300000},
489 {"file-system", 0x340000, 0x470000},
490 {"soft-version", 0x7b0000, 0x00100},
491 {"support-list", 0x7b1000, 0x00400},
492 {"user-config", 0x7c0000, 0x10000},
493 {"default-config", 0x7d0000, 0x10000},
494 {"log", 0x7e0000, 0x10000},
495 {"radio", 0x7f0000, 0x10000},
499 .first_sysupgrade_partition
= "os-image",
500 .last_sysupgrade_partition
= "support-list",
503 /** Firmware layout for the CPE610V2 */
506 .vendor
= "CPE610(TP-LINK|UN|N300-5|00000000):2.0\r\n",
509 "CPE610(TP-LINK|EU|N300-5|00000000):2.0\r\n"
510 "CPE610(TP-LINK|EU|N300-5|45550000):2.0\r\n"
511 "CPE610(TP-LINK|EU|N300-5|55530000):2.0\r\n"
512 "CPE610(TP-LINK|UN|N300-5|00000000):2.0\r\n"
513 "CPE610(TP-LINK|UN|N300-5|45550000):2.0\r\n"
514 "CPE610(TP-LINK|UN|N300-5|55530000):2.0\r\n"
515 "CPE610(TP-LINK|US|N300-5|55530000):2.0\r\n"
516 "CPE610(TP-LINK|UN|N300-5):2.0\r\n"
517 "CPE610(TP-LINK|EU|N300-5):2.0\r\n"
518 "CPE610(TP-LINK|US|N300-5):2.0\r\n",
523 {"fs-uboot", 0x00000, 0x20000},
524 {"partition-table", 0x20000, 0x02000},
525 {"default-mac", 0x30000, 0x00020},
526 {"product-info", 0x31100, 0x00100},
527 {"signature", 0x32000, 0x00400},
528 {"os-image", 0x40000, 0x300000},
529 {"file-system", 0x340000, 0x470000},
530 {"soft-version", 0x7b0000, 0x00100},
531 {"support-list", 0x7b1000, 0x00400},
532 {"user-config", 0x7c0000, 0x10000},
533 {"default-config", 0x7d0000, 0x10000},
534 {"log", 0x7e0000, 0x10000},
535 {"radio", 0x7f0000, 0x10000},
539 .first_sysupgrade_partition
= "os-image",
540 .last_sysupgrade_partition
= "support-list",
545 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
548 "WBS210(TP-LINK|UN|N300-2):1.20\r\n"
549 "WBS210(TP-LINK|US|N300-2):1.20\r\n"
550 "WBS210(TP-LINK|EU|N300-2):1.20\r\n",
555 {"fs-uboot", 0x00000, 0x20000},
556 {"partition-table", 0x20000, 0x02000},
557 {"default-mac", 0x30000, 0x00020},
558 {"product-info", 0x31100, 0x00100},
559 {"signature", 0x32000, 0x00400},
560 {"os-image", 0x40000, 0x300000},
561 {"file-system", 0x340000, 0x470000},
562 {"soft-version", 0x7b0000, 0x00100},
563 {"support-list", 0x7b1000, 0x00400},
564 {"user-config", 0x7c0000, 0x10000},
565 {"default-config", 0x7d0000, 0x10000},
566 {"log", 0x7e0000, 0x10000},
567 {"radio", 0x7f0000, 0x10000},
571 .first_sysupgrade_partition
= "os-image",
572 .last_sysupgrade_partition
= "support-list",
577 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
580 "WBS210(TP-LINK|UN|N300-2|00000000):2.0\r\n"
581 "WBS210(TP-LINK|US|N300-2|55530000):2.0\r\n"
582 "WBS210(TP-LINK|EU|N300-2|45550000):2.0\r\n",
587 {"fs-uboot", 0x00000, 0x20000},
588 {"partition-table", 0x20000, 0x02000},
589 {"default-mac", 0x30000, 0x00020},
590 {"product-info", 0x31100, 0x00100},
591 {"signature", 0x32000, 0x00400},
592 {"os-image", 0x40000, 0x300000},
593 {"file-system", 0x340000, 0x470000},
594 {"soft-version", 0x7b0000, 0x00100},
595 {"support-list", 0x7b1000, 0x00400},
596 {"user-config", 0x7c0000, 0x10000},
597 {"default-config", 0x7d0000, 0x10000},
598 {"log", 0x7e0000, 0x10000},
599 {"radio", 0x7f0000, 0x10000},
603 .first_sysupgrade_partition
= "os-image",
604 .last_sysupgrade_partition
= "support-list",
609 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
612 "WBS510(TP-LINK|UN|N300-5):1.20\r\n"
613 "WBS510(TP-LINK|US|N300-5):1.20\r\n"
614 "WBS510(TP-LINK|EU|N300-5):1.20\r\n"
615 "WBS510(TP-LINK|CA|N300-5):1.20\r\n",
620 {"fs-uboot", 0x00000, 0x20000},
621 {"partition-table", 0x20000, 0x02000},
622 {"default-mac", 0x30000, 0x00020},
623 {"product-info", 0x31100, 0x00100},
624 {"signature", 0x32000, 0x00400},
625 {"os-image", 0x40000, 0x300000},
626 {"file-system", 0x340000, 0x470000},
627 {"soft-version", 0x7b0000, 0x00100},
628 {"support-list", 0x7b1000, 0x00400},
629 {"user-config", 0x7c0000, 0x10000},
630 {"default-config", 0x7d0000, 0x10000},
631 {"log", 0x7e0000, 0x10000},
632 {"radio", 0x7f0000, 0x10000},
636 .first_sysupgrade_partition
= "os-image",
637 .last_sysupgrade_partition
= "support-list",
642 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
645 "WBS510(TP-LINK|UN|N300-5|00000000):2.0\r\n"
646 "WBS510(TP-LINK|US|N300-5|55530000):2.0\r\n"
647 "WBS510(TP-LINK|EU|N300-5|45550000):2.0\r\n"
648 "WBS510(TP-LINK|CA|N300-5|43410000):2.0\r\n",
653 {"fs-uboot", 0x00000, 0x20000},
654 {"partition-table", 0x20000, 0x02000},
655 {"default-mac", 0x30000, 0x00020},
656 {"product-info", 0x31100, 0x00100},
657 {"signature", 0x32000, 0x00400},
658 {"os-image", 0x40000, 0x300000},
659 {"file-system", 0x340000, 0x470000},
660 {"soft-version", 0x7b0000, 0x00100},
661 {"support-list", 0x7b1000, 0x00400},
662 {"user-config", 0x7c0000, 0x10000},
663 {"default-config", 0x7d0000, 0x10000},
664 {"log", 0x7e0000, 0x10000},
665 {"radio", 0x7f0000, 0x10000},
669 .first_sysupgrade_partition
= "os-image",
670 .last_sysupgrade_partition
= "support-list",
673 /** Firmware layout for the AD7200 */
679 "{product_name:AD7200,product_ver:1.0.0,special_id:00000000}\r\n",
684 {"SBL1", 0x00000, 0x20000},
685 {"MIBIB", 0x20000, 0x20000},
686 {"SBL2", 0x40000, 0x20000},
687 {"SBL3", 0x60000, 0x30000},
688 {"DDRCONFIG", 0x90000, 0x10000},
689 {"SSD", 0xa0000, 0x10000},
690 {"TZ", 0xb0000, 0x30000},
691 {"RPM", 0xe0000, 0x20000},
692 {"fs-uboot", 0x100000, 0x70000},
693 {"uboot-env", 0x170000, 0x40000},
694 {"radio", 0x1b0000, 0x40000},
695 {"os-image", 0x1f0000, 0x400000},
696 {"file-system", 0x5f0000, 0x1900000},
697 {"default-mac", 0x1ef0000, 0x00200},
698 {"pin", 0x1ef0200, 0x00200},
699 {"device-id", 0x1ef0400, 0x00200},
700 {"product-info", 0x1ef0600, 0x0fa00},
701 {"partition-table", 0x1f00000, 0x10000},
702 {"soft-version", 0x1f10000, 0x10000},
703 {"support-list", 0x1f20000, 0x10000},
704 {"profile", 0x1f30000, 0x10000},
705 {"default-config", 0x1f40000, 0x10000},
706 {"user-config", 0x1f50000, 0x40000},
707 {"qos-db", 0x1f90000, 0x40000},
708 {"usb-config", 0x1fd0000, 0x10000},
709 {"log", 0x1fe0000, 0x20000},
713 .first_sysupgrade_partition
= "os-image",
714 .last_sysupgrade_partition
= "file-system"
717 /** Firmware layout for the C2600 */
723 "{product_name:Archer C2600,product_ver:1.0.0,special_id:00000000}\r\n",
728 We use a bigger os-image partition than the stock images (and thus
729 smaller file-system), as our kernel doesn't fit in the stock firmware's
730 2 MB os-image since kernel 4.14.
733 {"SBL1", 0x00000, 0x20000},
734 {"MIBIB", 0x20000, 0x20000},
735 {"SBL2", 0x40000, 0x20000},
736 {"SBL3", 0x60000, 0x30000},
737 {"DDRCONFIG", 0x90000, 0x10000},
738 {"SSD", 0xa0000, 0x10000},
739 {"TZ", 0xb0000, 0x30000},
740 {"RPM", 0xe0000, 0x20000},
741 {"fs-uboot", 0x100000, 0x70000},
742 {"uboot-env", 0x170000, 0x40000},
743 {"radio", 0x1b0000, 0x40000},
744 {"os-image", 0x1f0000, 0x400000}, /* Stock: base 0x1f0000 size 0x200000 */
745 {"file-system", 0x5f0000, 0x1900000}, /* Stock: base 0x3f0000 size 0x1b00000 */
746 {"default-mac", 0x1ef0000, 0x00200},
747 {"pin", 0x1ef0200, 0x00200},
748 {"product-info", 0x1ef0400, 0x0fc00},
749 {"partition-table", 0x1f00000, 0x10000},
750 {"soft-version", 0x1f10000, 0x10000},
751 {"support-list", 0x1f20000, 0x10000},
752 {"profile", 0x1f30000, 0x10000},
753 {"default-config", 0x1f40000, 0x10000},
754 {"user-config", 0x1f50000, 0x40000},
755 {"qos-db", 0x1f90000, 0x40000},
756 {"usb-config", 0x1fd0000, 0x10000},
757 {"log", 0x1fe0000, 0x20000},
761 .first_sysupgrade_partition
= "os-image",
762 .last_sysupgrade_partition
= "file-system"
765 /** Firmware layout for the A7-V5 */
767 .id
= "ARCHER-A7-V5",
770 "{product_name:Archer A7,product_ver:5.0.0,special_id:45550000}\n"
771 "{product_name:Archer A7,product_ver:5.0.0,special_id:55530000}\n"
772 "{product_name:Archer A7,product_ver:5.0.0,special_id:43410000}\n"
773 "{product_name:Archer A7,product_ver:5.0.0,special_id:4A500000}\n"
774 "{product_name:Archer A7,product_ver:5.0.0,special_id:54570000}\n"
775 "{product_name:Archer A7,product_ver:5.0.0,special_id:52550000}\n",
777 .soft_ver
= "soft_ver:1.0.0\n",
779 /* We're using a dynamic kernel/rootfs split here */
781 {"factory-boot", 0x00000, 0x20000},
782 {"fs-uboot", 0x20000, 0x20000},
783 {"firmware", 0x40000, 0xec0000}, /* Stock: name os-image base 0x40000 size 0x120000 */
784 /* Stock: name file-system base 0x160000 size 0xda0000 */
785 {"default-mac", 0xf40000, 0x00200},
786 {"pin", 0xf40200, 0x00200},
787 {"device-id", 0xf40400, 0x00100},
788 {"product-info", 0xf40500, 0x0fb00},
789 {"soft-version", 0xf50000, 0x00100},
790 {"extra-para", 0xf51000, 0x01000},
791 {"support-list", 0xf52000, 0x0a000},
792 {"profile", 0xf5c000, 0x04000},
793 {"default-config", 0xf60000, 0x10000},
794 {"user-config", 0xf70000, 0x40000},
795 {"certificate", 0xfb0000, 0x10000},
796 {"partition-table", 0xfc0000, 0x10000},
797 {"log", 0xfd0000, 0x20000},
798 {"radio", 0xff0000, 0x10000},
802 .first_sysupgrade_partition
= "os-image",
803 .last_sysupgrade_partition
= "file-system",
806 /** Firmware layout for the C2v3 */
808 .id
= "ARCHER-C2-V3",
811 "{product_name:ArcherC2,product_ver:3.0.0,special_id:00000000}\n"
812 "{product_name:ArcherC2,product_ver:3.0.0,special_id:55530000}\n"
813 "{product_name:ArcherC2,product_ver:3.0.0,special_id:45550000}\n",
815 .soft_ver
= "soft_ver:3.0.1\n",
817 /** We're using a dynamic kernel/rootfs split here */
820 {"factory-boot", 0x00000, 0x20000},
821 {"fs-uboot", 0x20000, 0x10000},
822 {"firmware", 0x30000, 0x7a0000},
823 {"user-config", 0x7d0000, 0x04000},
824 {"default-mac", 0x7e0000, 0x00100},
825 {"device-id", 0x7e0100, 0x00100},
826 {"extra-para", 0x7e0200, 0x00100},
827 {"pin", 0x7e0300, 0x00100},
828 {"support-list", 0x7e0400, 0x00400},
829 {"soft-version", 0x7e0800, 0x00400},
830 {"product-info", 0x7e0c00, 0x01400},
831 {"partition-table", 0x7e2000, 0x01000},
832 {"profile", 0x7e3000, 0x01000},
833 {"default-config", 0x7e4000, 0x04000},
834 {"merge-config", 0x7ec000, 0x02000},
835 {"qos-db", 0x7ee000, 0x02000},
836 {"radio", 0x7f0000, 0x10000},
840 .first_sysupgrade_partition
= "os-image",
841 .last_sysupgrade_partition
= "file-system",
844 /** Firmware layout for the C25v1 */
846 .id
= "ARCHER-C25-V1",
849 "{product_name:ArcherC25,product_ver:1.0.0,special_id:00000000}\n"
850 "{product_name:ArcherC25,product_ver:1.0.0,special_id:55530000}\n"
851 "{product_name:ArcherC25,product_ver:1.0.0,special_id:45550000}\n",
853 .soft_ver
= "soft_ver:1.0.0\n",
855 /* We're using a dynamic kernel/rootfs split here */
857 {"factory-boot", 0x00000, 0x20000},
858 {"fs-uboot", 0x20000, 0x10000},
859 {"firmware", 0x30000, 0x7a0000}, /* Stock: name os-image base 0x30000 size 0x100000 */
860 /* Stock: name file-system base 0x130000 size 0x6a0000 */
861 {"user-config", 0x7d0000, 0x04000},
862 {"default-mac", 0x7e0000, 0x00100},
863 {"device-id", 0x7e0100, 0x00100},
864 {"extra-para", 0x7e0200, 0x00100},
865 {"pin", 0x7e0300, 0x00100},
866 {"support-list", 0x7e0400, 0x00400},
867 {"soft-version", 0x7e0800, 0x00400},
868 {"product-info", 0x7e0c00, 0x01400},
869 {"partition-table", 0x7e2000, 0x01000},
870 {"profile", 0x7e3000, 0x01000},
871 {"default-config", 0x7e4000, 0x04000},
872 {"merge-config", 0x7ec000, 0x02000},
873 {"qos-db", 0x7ee000, 0x02000},
874 {"radio", 0x7f0000, 0x10000},
878 .first_sysupgrade_partition
= "os-image",
879 .last_sysupgrade_partition
= "file-system",
882 /** Firmware layout for the C58v1 */
884 .id
= "ARCHER-C58-V1",
888 "{product_name:Archer C58,product_ver:1.0.0,special_id:00000000}\r\n"
889 "{product_name:Archer C58,product_ver:1.0.0,special_id:45550000}\r\n"
890 "{product_name:Archer C58,product_ver:1.0.0,special_id:55530000}\r\n",
892 .soft_ver
= "soft_ver:1.0.0\n",
895 {"fs-uboot", 0x00000, 0x10000},
896 {"default-mac", 0x10000, 0x00200},
897 {"pin", 0x10200, 0x00200},
898 {"product-info", 0x10400, 0x00100},
899 {"partition-table", 0x10500, 0x00800},
900 {"soft-version", 0x11300, 0x00200},
901 {"support-list", 0x11500, 0x00100},
902 {"device-id", 0x11600, 0x00100},
903 {"profile", 0x11700, 0x03900},
904 {"default-config", 0x15000, 0x04000},
905 {"user-config", 0x19000, 0x04000},
906 {"firmware", 0x20000, 0x7c8000},
907 {"certyficate", 0x7e8000, 0x08000},
908 {"radio", 0x7f0000, 0x10000},
912 .first_sysupgrade_partition
= "os-image",
913 .last_sysupgrade_partition
= "file-system",
916 /** Firmware layout for the C59v1 */
918 .id
= "ARCHER-C59-V1",
922 "{product_name:Archer C59,product_ver:1.0.0,special_id:00000000}\r\n"
923 "{product_name:Archer C59,product_ver:1.0.0,special_id:45550000}\r\n"
924 "{product_name:Archer C59,product_ver:1.0.0,special_id:52550000}\r\n"
925 "{product_name:Archer C59,product_ver:1.0.0,special_id:55530000}\r\n",
927 .soft_ver
= "soft_ver:1.0.0\n",
929 /* We're using a dynamic kernel/rootfs split here */
931 {"fs-uboot", 0x00000, 0x10000},
932 {"default-mac", 0x10000, 0x00200},
933 {"pin", 0x10200, 0x00200},
934 {"device-id", 0x10400, 0x00100},
935 {"product-info", 0x10500, 0x0fb00},
936 {"firmware", 0x20000, 0xe30000},
937 {"partition-table", 0xe50000, 0x10000},
938 {"soft-version", 0xe60000, 0x10000},
939 {"support-list", 0xe70000, 0x10000},
940 {"profile", 0xe80000, 0x10000},
941 {"default-config", 0xe90000, 0x10000},
942 {"user-config", 0xea0000, 0x40000},
943 {"usb-config", 0xee0000, 0x10000},
944 {"certificate", 0xef0000, 0x10000},
945 {"qos-db", 0xf00000, 0x40000},
946 {"log", 0xfe0000, 0x10000},
947 {"radio", 0xff0000, 0x10000},
951 .first_sysupgrade_partition
= "os-image",
952 .last_sysupgrade_partition
= "file-system",
955 /** Firmware layout for the C59v2 */
957 .id
= "ARCHER-C59-V2",
961 "{product_name:Archer C59,product_ver:2.0.0,special_id:00000000}\r\n"
962 "{product_name:Archer C59,product_ver:2.0.0,special_id:45550000}\r\n"
963 "{product_name:Archer C59,product_ver:2.0.0,special_id:55530000}\r\n",
965 .soft_ver
= "soft_ver:2.0.0 Build 20161206 rel.7303\n",
967 /** We're using a dynamic kernel/rootfs split here */
969 {"factory-boot", 0x00000, 0x20000},
970 {"fs-uboot", 0x20000, 0x10000},
971 {"default-mac", 0x30000, 0x00200},
972 {"pin", 0x30200, 0x00200},
973 {"device-id", 0x30400, 0x00100},
974 {"product-info", 0x30500, 0x0fb00},
975 {"firmware", 0x40000, 0xe10000},
976 {"partition-table", 0xe50000, 0x10000},
977 {"soft-version", 0xe60000, 0x10000},
978 {"support-list", 0xe70000, 0x10000},
979 {"profile", 0xe80000, 0x10000},
980 {"default-config", 0xe90000, 0x10000},
981 {"user-config", 0xea0000, 0x40000},
982 {"usb-config", 0xee0000, 0x10000},
983 {"certificate", 0xef0000, 0x10000},
984 {"extra-para", 0xf00000, 0x10000},
985 {"qos-db", 0xf10000, 0x30000},
986 {"log", 0xfe0000, 0x10000},
987 {"radio", 0xff0000, 0x10000},
991 .first_sysupgrade_partition
= "os-image",
992 .last_sysupgrade_partition
= "file-system",
995 /** Firmware layout for the Archer C6 v2 (EU/RU/JP) */
997 .id
= "ARCHER-C6-V2",
1001 "{product_name:Archer C6,product_ver:2.0.0,special_id:45550000}\r\n"
1002 "{product_name:Archer C6,product_ver:2.0.0,special_id:52550000}\r\n"
1003 "{product_name:Archer C6,product_ver:2.0.0,special_id:4A500000}\r\n",
1005 .soft_ver
= "soft_ver:1.9.1\n",
1008 {"fs-uboot", 0x00000, 0x20000},
1009 {"default-mac", 0x20000, 0x00200},
1010 {"pin", 0x20200, 0x00100},
1011 {"product-info", 0x20300, 0x00200},
1012 {"device-id", 0x20500, 0x0fb00},
1013 {"firmware", 0x30000, 0x7a9400},
1014 {"soft-version", 0x7d9400, 0x00100},
1015 {"extra-para", 0x7d9500, 0x00100},
1016 {"support-list", 0x7d9600, 0x00200},
1017 {"profile", 0x7d9800, 0x03000},
1018 {"default-config", 0x7dc800, 0x03000},
1019 {"partition-table", 0x7df800, 0x00800},
1020 {"user-config", 0x7e0000, 0x0c000},
1021 {"certificate", 0x7ec000, 0x04000},
1022 {"radio", 0x7f0000, 0x10000},
1026 .first_sysupgrade_partition
= "os-image",
1027 .last_sysupgrade_partition
= "file-system",
1030 /** Firmware layout for the Archer C6 v2 (US) and A6 v2 (US/TW) */
1032 .id
= "ARCHER-C6-V2-US",
1036 "{product_name:Archer A6,product_ver:2.0.0,special_id:55530000}\n"
1037 "{product_name:Archer A6,product_ver:2.0.0,special_id:54570000}\n"
1038 "{product_name:Archer C6,product_ver:2.0.0,special_id:55530000}\n",
1040 .soft_ver
= "soft_ver:1.9.1\n",
1043 {"factory-boot", 0x00000, 0x20000},
1044 {"default-mac", 0x20000, 0x00200},
1045 {"pin", 0x20200, 0x00100},
1046 {"product-info", 0x20300, 0x00200},
1047 {"device-id", 0x20500, 0x0fb00},
1048 {"fs-uboot", 0x30000, 0x20000},
1049 {"firmware", 0x50000, 0xf89400},
1050 {"soft-version", 0xfd9400, 0x00100},
1051 {"extra-para", 0xfd9500, 0x00100},
1052 {"support-list", 0xfd9600, 0x00200},
1053 {"profile", 0xfd9800, 0x03000},
1054 {"default-config", 0xfdc800, 0x03000},
1055 {"partition-table", 0xfdf800, 0x00800},
1056 {"user-config", 0xfe0000, 0x0c000},
1057 {"certificate", 0xfec000, 0x04000},
1058 {"radio", 0xff0000, 0x10000},
1061 .first_sysupgrade_partition
= "os-image",
1062 .last_sysupgrade_partition
= "file-system",
1064 /** Firmware layout for the Archer A6 v3 */
1066 .id
= "ARCHER-A6-V3",
1070 "{product_name:Archer A6,product_ver:3.0.0,special_id:55530000}\n"
1071 "{product_name:Archer A6,product_ver:3.0.0,special_id:54570000}\n",
1073 .soft_ver
= "soft_ver:1.0.5\n",
1076 {"fs-uboot", 0x00000, 0x40000},
1077 {"firmware", 0x40000, 0xf60000},
1078 {"default-mac", 0xfa0000, 0x00200},
1079 {"pin", 0xfa0200, 0x00100},
1080 {"device-id", 0xfa0300, 0x00100},
1081 {"product-info", 0xfa0400, 0x0fc00},
1082 {"default-config", 0xfb0000, 0x08000},
1083 {"ap-def-config", 0xfb8000, 0x08000},
1084 {"user-config", 0xfc0000, 0x0a000},
1085 {"ag-config", 0xfca000, 0x04000},
1086 {"certificate", 0xfce000, 0x02000},
1087 {"ap-config", 0xfd0000, 0x06000},
1088 {"router-config", 0xfd6000, 0x06000},
1089 {"favicon", 0xfdc000, 0x02000},
1090 {"logo", 0xfde000, 0x02000},
1091 {"partition-table", 0xfe0000, 0x00800},
1092 {"soft-version", 0xfe0800, 0x00100},
1093 {"support-list", 0xfe0900, 0x00200},
1094 {"profile", 0xfe0b00, 0x03000},
1095 {"extra-para", 0xfe3b00, 0x00100},
1096 {"radio", 0xff0000, 0x10000},
1099 .first_sysupgrade_partition
= "os-image",
1100 .last_sysupgrade_partition
= "file-system",
1102 /** Firmware layout for the Archer C6U v1 */
1104 .id
= "ARCHER-C6U-V1",
1108 "{product_name:Archer C6U,product_ver:1.0.0,special_id:45550000}\n",
1110 .soft_ver
= "soft_ver:1.0.2\n",
1113 {"fs-uboot", 0x00000, 0x40000},
1114 {"firmware", 0x40000, 0xf60000},
1115 {"default-mac", 0xfa0000, 0x00200},
1116 {"pin", 0xfa0200, 0x00100},
1117 {"device-id", 0xfa0300, 0x00100},
1118 {"product-info", 0xfa0400, 0x0fc00},
1119 {"default-config", 0xfb0000, 0x08000},
1120 {"ap-def-config", 0xfb8000, 0x08000},
1121 {"user-config", 0xfc0000, 0x0c000},
1122 {"certificate", 0xfcc000, 0x04000},
1123 {"ap-config", 0xfd0000, 0x08000},
1124 {"router-config", 0xfd8000, 0x08000},
1125 {"partition-table", 0xfe0000, 0x00800},
1126 {"soft-version", 0xfe0800, 0x00100},
1127 {"support-list", 0xfe0900, 0x00200},
1128 {"profile", 0xfe0b00, 0x03000},
1129 {"extra-para", 0xfe3b00, 0x00100},
1130 {"radio", 0xff0000, 0x10000},
1133 .first_sysupgrade_partition
= "os-image",
1134 .last_sysupgrade_partition
= "file-system",
1136 /** Firmware layout for the C60v1 */
1138 .id
= "ARCHER-C60-V1",
1142 "{product_name:Archer C60,product_ver:1.0.0,special_id:00000000}\r\n"
1143 "{product_name:Archer C60,product_ver:1.0.0,special_id:45550000}\r\n"
1144 "{product_name:Archer C60,product_ver:1.0.0,special_id:55530000}\r\n",
1146 .soft_ver
= "soft_ver:1.0.0\n",
1149 {"fs-uboot", 0x00000, 0x10000},
1150 {"default-mac", 0x10000, 0x00200},
1151 {"pin", 0x10200, 0x00200},
1152 {"product-info", 0x10400, 0x00100},
1153 {"partition-table", 0x10500, 0x00800},
1154 {"soft-version", 0x11300, 0x00200},
1155 {"support-list", 0x11500, 0x00100},
1156 {"device-id", 0x11600, 0x00100},
1157 {"profile", 0x11700, 0x03900},
1158 {"default-config", 0x15000, 0x04000},
1159 {"user-config", 0x19000, 0x04000},
1160 {"firmware", 0x20000, 0x7c8000},
1161 {"certyficate", 0x7e8000, 0x08000},
1162 {"radio", 0x7f0000, 0x10000},
1166 .first_sysupgrade_partition
= "os-image",
1167 .last_sysupgrade_partition
= "file-system",
1170 /** Firmware layout for the C60v2 */
1172 .id
= "ARCHER-C60-V2",
1176 "{product_name:Archer C60,product_ver:2.0.0,special_id:42520000}\r\n"
1177 "{product_name:Archer C60,product_ver:2.0.0,special_id:45550000}\r\n"
1178 "{product_name:Archer C60,product_ver:2.0.0,special_id:55530000}\r\n",
1180 .soft_ver
= "soft_ver:2.0.0\n",
1183 {"factory-boot", 0x00000, 0x1fb00},
1184 {"default-mac", 0x1fb00, 0x00200},
1185 {"pin", 0x1fd00, 0x00100},
1186 {"product-info", 0x1fe00, 0x00100},
1187 {"device-id", 0x1ff00, 0x00100},
1188 {"fs-uboot", 0x20000, 0x10000},
1189 {"firmware", 0x30000, 0x7a0000},
1190 {"soft-version", 0x7d9500, 0x00100},
1191 {"support-list", 0x7d9600, 0x00100},
1192 {"extra-para", 0x7d9700, 0x00100},
1193 {"profile", 0x7d9800, 0x03000},
1194 {"default-config", 0x7dc800, 0x03000},
1195 {"partition-table", 0x7df800, 0x00800},
1196 {"user-config", 0x7e0000, 0x0c000},
1197 {"certificate", 0x7ec000, 0x04000},
1198 {"radio", 0x7f0000, 0x10000},
1202 .first_sysupgrade_partition
= "os-image",
1203 .last_sysupgrade_partition
= "file-system",
1206 /** Firmware layout for the C60v3 */
1208 .id
= "ARCHER-C60-V3",
1212 "{product_name:Archer C60,product_ver:3.0.0,special_id:42520000}\r\n"
1213 "{product_name:Archer C60,product_ver:3.0.0,special_id:45550000}\r\n"
1214 "{product_name:Archer C60,product_ver:3.0.0,special_id:55530000}\r\n",
1216 .soft_ver
= "soft_ver:3.0.0\n",
1219 {"factory-boot", 0x00000, 0x1fb00},
1220 {"default-mac", 0x1fb00, 0x00200},
1221 {"pin", 0x1fd00, 0x00100},
1222 {"product-info", 0x1fe00, 0x00100},
1223 {"device-id", 0x1ff00, 0x00100},
1224 {"fs-uboot", 0x20000, 0x10000},
1225 {"firmware", 0x30000, 0x7a0000},
1226 {"soft-version", 0x7d9500, 0x00100},
1227 {"support-list", 0x7d9600, 0x00100},
1228 {"extra-para", 0x7d9700, 0x00100},
1229 {"profile", 0x7d9800, 0x03000},
1230 {"default-config", 0x7dc800, 0x03000},
1231 {"partition-table", 0x7df800, 0x00800},
1232 {"user-config", 0x7e0000, 0x0c000},
1233 {"certificate", 0x7ec000, 0x04000},
1234 {"radio", 0x7f0000, 0x10000},
1238 .first_sysupgrade_partition
= "os-image",
1239 .last_sysupgrade_partition
= "file-system",
1242 /** Firmware layout for the C5 */
1244 .id
= "ARCHER-C5-V2",
1248 "{product_name:ArcherC5,product_ver:2.0.0,special_id:00000000}\r\n"
1249 "{product_name:ArcherC5,product_ver:2.0.0,special_id:55530000}\r\n"
1250 "{product_name:ArcherC5,product_ver:2.0.0,special_id:4A500000}\r\n", /* JP version */
1255 {"fs-uboot", 0x00000, 0x40000},
1256 {"os-image", 0x40000, 0x200000},
1257 {"file-system", 0x240000, 0xc00000},
1258 {"default-mac", 0xe40000, 0x00200},
1259 {"pin", 0xe40200, 0x00200},
1260 {"product-info", 0xe40400, 0x00200},
1261 {"partition-table", 0xe50000, 0x10000},
1262 {"soft-version", 0xe60000, 0x00200},
1263 {"support-list", 0xe61000, 0x0f000},
1264 {"profile", 0xe70000, 0x10000},
1265 {"default-config", 0xe80000, 0x10000},
1266 {"user-config", 0xe90000, 0x50000},
1267 {"log", 0xee0000, 0x100000},
1268 {"radio_bk", 0xfe0000, 0x10000},
1269 {"radio", 0xff0000, 0x10000},
1273 .first_sysupgrade_partition
= "os-image",
1274 .last_sysupgrade_partition
= "file-system"
1277 /** Firmware layout for the C7 */
1279 .id
= "ARCHER-C7-V4",
1282 "{product_name:Archer C7,product_ver:4.0.0,special_id:00000000}\n"
1283 "{product_name:Archer C7,product_ver:4.0.0,special_id:41550000}\n"
1284 "{product_name:Archer C7,product_ver:4.0.0,special_id:45550000}\n"
1285 "{product_name:Archer C7,product_ver:4.0.0,special_id:4B520000}\n"
1286 "{product_name:Archer C7,product_ver:4.0.0,special_id:42520000}\n"
1287 "{product_name:Archer C7,product_ver:4.0.0,special_id:4A500000}\n"
1288 "{product_name:Archer C7,product_ver:4.0.0,special_id:52550000}\n"
1289 "{product_name:Archer C7,product_ver:4.0.0,special_id:54570000}\n"
1290 "{product_name:Archer C7,product_ver:4.0.0,special_id:55530000}\n"
1291 "{product_name:Archer C7,product_ver:4.0.0,special_id:43410000}\n",
1293 .soft_ver
= "soft_ver:1.0.0\n",
1295 /* We're using a dynamic kernel/rootfs split here */
1297 {"factory-boot", 0x00000, 0x20000},
1298 {"fs-uboot", 0x20000, 0x20000},
1299 {"firmware", 0x40000, 0xEC0000}, /* Stock: name os-image base 0x40000 size 0x120000 */
1300 /* Stock: name file-system base 0x160000 size 0xda0000 */
1301 {"default-mac", 0xf00000, 0x00200},
1302 {"pin", 0xf00200, 0x00200},
1303 {"device-id", 0xf00400, 0x00100},
1304 {"product-info", 0xf00500, 0x0fb00},
1305 {"soft-version", 0xf10000, 0x00100},
1306 {"extra-para", 0xf11000, 0x01000},
1307 {"support-list", 0xf12000, 0x0a000},
1308 {"profile", 0xf1c000, 0x04000},
1309 {"default-config", 0xf20000, 0x10000},
1310 {"user-config", 0xf30000, 0x40000},
1311 {"qos-db", 0xf70000, 0x40000},
1312 {"certificate", 0xfb0000, 0x10000},
1313 {"partition-table", 0xfc0000, 0x10000},
1314 {"log", 0xfd0000, 0x20000},
1315 {"radio", 0xff0000, 0x10000},
1319 .first_sysupgrade_partition
= "os-image",
1320 .last_sysupgrade_partition
= "file-system",
1323 /** Firmware layout for the C7 v5*/
1325 .id
= "ARCHER-C7-V5",
1328 "{product_name:Archer C7,product_ver:5.0.0,special_id:00000000}\n"
1329 "{product_name:Archer C7,product_ver:5.0.0,special_id:45550000}\n"
1330 "{product_name:Archer C7,product_ver:5.0.0,special_id:55530000}\n"
1331 "{product_name:Archer C7,product_ver:5.0.0,special_id:43410000}\n"
1332 "{product_name:Archer C7,product_ver:5.0.0,special_id:4A500000}\n"
1333 "{product_name:Archer C7,product_ver:5.0.0,special_id:54570000}\n"
1334 "{product_name:Archer C7,product_ver:5.0.0,special_id:52550000}\n"
1335 "{product_name:Archer C7,product_ver:5.0.0,special_id:4B520000}\n",
1338 .soft_ver
= "soft_ver:7.0.0\n",
1340 /* We're using a dynamic kernel/rootfs split here */
1342 {"factory-boot", 0x00000, 0x20000},
1343 {"fs-uboot", 0x20000, 0x20000},
1344 {"partition-table", 0x40000, 0x10000},
1345 {"radio", 0x50000, 0x10000},
1346 {"default-mac", 0x60000, 0x00200},
1347 {"pin", 0x60200, 0x00200},
1348 {"device-id", 0x60400, 0x00100},
1349 {"product-info", 0x60500, 0x0fb00},
1350 {"soft-version", 0x70000, 0x01000},
1351 {"extra-para", 0x71000, 0x01000},
1352 {"support-list", 0x72000, 0x0a000},
1353 {"profile", 0x7c000, 0x04000},
1354 {"user-config", 0x80000, 0x40000},
1357 {"firmware", 0xc0000, 0xf00000}, /* Stock: name os-image base 0xc0000 size 0x120000 */
1358 /* Stock: name file-system base 0x1e0000 size 0xde0000 */
1360 {"log", 0xfc0000, 0x20000},
1361 {"certificate", 0xfe0000, 0x10000},
1362 {"default-config", 0xff0000, 0x10000},
1367 .first_sysupgrade_partition
= "os-image",
1368 .last_sysupgrade_partition
= "file-system",
1371 /** Firmware layout for the C9 */
1377 "{product_name:ArcherC9,"
1378 "product_ver:1.0.0,"
1379 "special_id:00000000}\n",
1384 {"fs-uboot", 0x00000, 0x40000},
1385 {"os-image", 0x40000, 0x200000},
1386 {"file-system", 0x240000, 0xc00000},
1387 {"default-mac", 0xe40000, 0x00200},
1388 {"pin", 0xe40200, 0x00200},
1389 {"product-info", 0xe40400, 0x00200},
1390 {"partition-table", 0xe50000, 0x10000},
1391 {"soft-version", 0xe60000, 0x00200},
1392 {"support-list", 0xe61000, 0x0f000},
1393 {"profile", 0xe70000, 0x10000},
1394 {"default-config", 0xe80000, 0x10000},
1395 {"user-config", 0xe90000, 0x50000},
1396 {"log", 0xee0000, 0x100000},
1397 {"radio_bk", 0xfe0000, 0x10000},
1398 {"radio", 0xff0000, 0x10000},
1402 .first_sysupgrade_partition
= "os-image",
1403 .last_sysupgrade_partition
= "file-system"
1406 /** Firmware layout for the EAP120 */
1409 .vendor
= "EAP120(TP-LINK|UN|N300-2):1.0\r\n",
1412 "EAP120(TP-LINK|UN|N300-2):1.0\r\n",
1417 {"fs-uboot", 0x00000, 0x20000},
1418 {"partition-table", 0x20000, 0x02000},
1419 {"default-mac", 0x30000, 0x00020},
1420 {"support-list", 0x31000, 0x00100},
1421 {"product-info", 0x31100, 0x00100},
1422 {"soft-version", 0x32000, 0x00100},
1423 {"os-image", 0x40000, 0x180000},
1424 {"file-system", 0x1c0000, 0x600000},
1425 {"user-config", 0x7c0000, 0x10000},
1426 {"backup-config", 0x7d0000, 0x10000},
1427 {"log", 0x7e0000, 0x10000},
1428 {"radio", 0x7f0000, 0x10000},
1432 .first_sysupgrade_partition
= "os-image",
1433 .last_sysupgrade_partition
= "file-system"
1436 /** Firmware layout for the EAP225-Outdoor v1 */
1438 .id
= "EAP225-OUTDOOR-V1",
1441 "EAP225-Outdoor(TP-Link|UN|AC1200-D):1.0\r\n",
1442 .part_trail
= PART_TRAIL_NONE
,
1444 .soft_ver_compat_level
= 1,
1447 {"fs-uboot", 0x00000, 0x20000},
1448 {"partition-table", 0x20000, 0x02000},
1449 {"default-mac", 0x30000, 0x01000},
1450 {"support-list", 0x31000, 0x00100},
1451 {"product-info", 0x31100, 0x00400},
1452 {"soft-version", 0x32000, 0x00100},
1453 {"firmware", 0x40000, 0xd80000},
1454 {"user-config", 0xdc0000, 0x30000},
1455 {"mutil-log", 0xf30000, 0x80000},
1456 {"oops", 0xfb0000, 0x40000},
1457 {"radio", 0xff0000, 0x10000},
1461 .first_sysupgrade_partition
= "os-image",
1462 .last_sysupgrade_partition
= "file-system"
1465 /** Firmware layout for the EAP225 v3 */
1470 "EAP225(TP-Link|UN|AC1350-D):3.0\r\n",
1471 .part_trail
= PART_TRAIL_NONE
,
1473 .soft_ver_compat_level
= 1,
1476 {"fs-uboot", 0x00000, 0x20000},
1477 {"partition-table", 0x20000, 0x02000},
1478 {"default-mac", 0x30000, 0x01000},
1479 {"support-list", 0x31000, 0x00100},
1480 {"product-info", 0x31100, 0x00400},
1481 {"soft-version", 0x32000, 0x00100},
1482 {"firmware", 0x40000, 0xd80000},
1483 {"user-config", 0xdc0000, 0x30000},
1484 {"mutil-log", 0xf30000, 0x80000},
1485 {"oops", 0xfb0000, 0x40000},
1486 {"radio", 0xff0000, 0x10000},
1490 .first_sysupgrade_partition
= "os-image",
1491 .last_sysupgrade_partition
= "file-system"
1494 /** Firmware layout for the EAP225-Wall v2 */
1496 .id
= "EAP225-WALL-V2",
1499 "EAP225-Wall(TP-Link|UN|AC1200-D):2.0\r\n",
1500 .part_trail
= PART_TRAIL_NONE
,
1502 .soft_ver_compat_level
= 1,
1505 {"fs-uboot", 0x00000, 0x20000},
1506 {"partition-table", 0x20000, 0x02000},
1507 {"default-mac", 0x30000, 0x01000},
1508 {"support-list", 0x31000, 0x00100},
1509 {"product-info", 0x31100, 0x00400},
1510 {"soft-version", 0x32000, 0x00100},
1511 {"firmware", 0x40000, 0xd80000},
1512 {"user-config", 0xdc0000, 0x30000},
1513 {"mutil-log", 0xf30000, 0x80000},
1514 {"oops", 0xfb0000, 0x40000},
1515 {"radio", 0xff0000, 0x10000},
1519 .first_sysupgrade_partition
= "os-image",
1520 .last_sysupgrade_partition
= "file-system"
1523 /** Firmware layout for the EAP235-Wall v1 */
1525 .id
= "EAP235-WALL-V1",
1528 "EAP235-Wall(TP-Link|UN|AC1200-D):1.0\r\n",
1529 .part_trail
= PART_TRAIL_NONE
,
1531 .soft_ver_compat_level
= 1,
1534 {"fs-uboot", 0x00000, 0x80000},
1535 {"partition-table", 0x80000, 0x02000},
1536 {"default-mac", 0x90000, 0x01000},
1537 {"support-list", 0x91000, 0x00100},
1538 {"product-info", 0x91100, 0x00400},
1539 {"soft-version", 0x92000, 0x00100},
1540 {"firmware", 0xa0000, 0xd20000},
1541 {"user-config", 0xdc0000, 0x30000},
1542 {"mutil-log", 0xf30000, 0x80000},
1543 {"oops", 0xfb0000, 0x40000},
1544 {"radio", 0xff0000, 0x10000},
1548 .first_sysupgrade_partition
= "os-image",
1549 .last_sysupgrade_partition
= "file-system"
1552 /** Firmware layout for the EAP245 v1 */
1557 "EAP245(TP-LINK|UN|AC1750-D):1.0\r\n",
1558 .part_trail
= PART_TRAIL_NONE
,
1562 {"fs-uboot", 0x00000, 0x20000},
1563 {"partition-table", 0x20000, 0x02000},
1564 {"default-mac", 0x30000, 0x01000},
1565 {"support-list", 0x31000, 0x00100},
1566 {"product-info", 0x31100, 0x00400},
1567 {"soft-version", 0x32000, 0x00100},
1568 {"firmware", 0x40000, 0xd80000},
1569 {"user-config", 0xdc0000, 0x30000},
1570 {"radio", 0xff0000, 0x10000},
1574 .first_sysupgrade_partition
= "os-image",
1575 .last_sysupgrade_partition
= "file-system"
1578 /** Firmware layout for the EAP245 v3 */
1583 "EAP245(TP-Link|UN|AC1750-D):3.0\r\n",
1584 .part_trail
= PART_TRAIL_NONE
,
1586 .soft_ver_compat_level
= 1,
1588 /** Firmware partition with dynamic kernel/rootfs split */
1590 {"factroy-boot", 0x00000, 0x40000},
1591 {"fs-uboot", 0x40000, 0x40000},
1592 {"partition-table", 0x80000, 0x10000},
1593 {"default-mac", 0x90000, 0x01000},
1594 {"support-list", 0x91000, 0x00100},
1595 {"product-info", 0x91100, 0x00400},
1596 {"soft-version", 0x92000, 0x00100},
1597 {"radio", 0xa0000, 0x10000},
1598 {"extra-para", 0xb0000, 0x10000},
1599 {"firmware", 0xc0000, 0xe40000},
1600 {"config", 0xf00000, 0x30000},
1601 {"mutil-log", 0xf30000, 0x80000},
1602 {"oops", 0xfb0000, 0x40000},
1606 .first_sysupgrade_partition
= "os-image",
1607 .last_sysupgrade_partition
= "file-system"
1610 /** Firmware layout for the TL-WA850RE v2 */
1612 .id
= "TLWA850REV2",
1616 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:55530000}\n"
1617 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:00000000}\n"
1618 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:55534100}\n"
1619 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:45550000}\n"
1620 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:4B520000}\n"
1621 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:42520000}\n"
1622 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:4A500000}\n"
1623 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:43410000}\n"
1624 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:41550000}\n"
1625 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:52550000}\n",
1630 576KB were moved from file-system to os-image
1631 in comparison to the stock image
1634 {"fs-uboot", 0x00000, 0x20000},
1635 {"firmware", 0x20000, 0x390000},
1636 {"partition-table", 0x3b0000, 0x02000},
1637 {"default-mac", 0x3c0000, 0x00020},
1638 {"pin", 0x3c0100, 0x00020},
1639 {"product-info", 0x3c1000, 0x01000},
1640 {"soft-version", 0x3c2000, 0x00100},
1641 {"support-list", 0x3c3000, 0x01000},
1642 {"profile", 0x3c4000, 0x08000},
1643 {"user-config", 0x3d0000, 0x10000},
1644 {"default-config", 0x3e0000, 0x10000},
1645 {"radio", 0x3f0000, 0x10000},
1649 .first_sysupgrade_partition
= "os-image",
1650 .last_sysupgrade_partition
= "file-system"
1653 /** Firmware layout for the TL-WA855RE v1 */
1655 .id
= "TLWA855REV1",
1659 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:00000000}\n"
1660 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:55530000}\n"
1661 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:45550000}\n"
1662 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:4B520000}\n"
1663 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:42520000}\n"
1664 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:4A500000}\n"
1665 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:43410000}\n"
1666 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:41550000}\n"
1667 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:52550000}\n",
1672 {"fs-uboot", 0x00000, 0x20000},
1673 {"os-image", 0x20000, 0x150000},
1674 {"file-system", 0x170000, 0x240000},
1675 {"partition-table", 0x3b0000, 0x02000},
1676 {"default-mac", 0x3c0000, 0x00020},
1677 {"pin", 0x3c0100, 0x00020},
1678 {"product-info", 0x3c1000, 0x01000},
1679 {"soft-version", 0x3c2000, 0x00100},
1680 {"support-list", 0x3c3000, 0x01000},
1681 {"profile", 0x3c4000, 0x08000},
1682 {"user-config", 0x3d0000, 0x10000},
1683 {"default-config", 0x3e0000, 0x10000},
1684 {"radio", 0x3f0000, 0x10000},
1688 .first_sysupgrade_partition
= "os-image",
1689 .last_sysupgrade_partition
= "file-system"
1692 /** Firmware layout for the TL-WPA8630P v2 (EU)*/
1694 .id
= "TL-WPA8630P-V2.0-EU",
1698 "{product_name:TL-WPA8630P,product_ver:2.0.0,special_id:45550000}\n",
1703 {"factory-uboot", 0x00000, 0x20000},
1704 {"fs-uboot", 0x20000, 0x20000},
1705 {"firmware", 0x40000, 0x5e0000},
1706 {"partition-table", 0x620000, 0x02000},
1707 {"default-mac", 0x630000, 0x00020},
1708 {"pin", 0x630100, 0x00020},
1709 {"device-id", 0x630200, 0x00030},
1710 {"product-info", 0x631100, 0x01000},
1711 {"extra-para", 0x632100, 0x01000},
1712 {"soft-version", 0x640000, 0x01000},
1713 {"support-list", 0x641000, 0x01000},
1714 {"profile", 0x642000, 0x08000},
1715 {"user-config", 0x650000, 0x10000},
1716 {"default-config", 0x660000, 0x10000},
1717 {"default-nvm", 0x670000, 0xc0000},
1718 {"default-pib", 0x730000, 0x40000},
1719 {"radio", 0x7f0000, 0x10000},
1723 .first_sysupgrade_partition
= "os-image",
1724 .last_sysupgrade_partition
= "file-system"
1727 /** Firmware layout for the TL-WPA8630P v2 (INT)*/
1729 .id
= "TL-WPA8630P-V2-INT",
1733 "{product_name:TL-WPA8630P,product_ver:2.0.0,special_id:41550000}\n"
1734 "{product_name:TL-WPA8630P,product_ver:2.0.0,special_id:44450000}\n"
1735 "{product_name:TL-WPA8630P,product_ver:2.1.0,special_id:41550000}\n",
1740 {"factory-uboot", 0x00000, 0x20000},
1741 {"fs-uboot", 0x20000, 0x20000},
1742 {"firmware", 0x40000, 0x5e0000},
1743 {"partition-table", 0x620000, 0x02000},
1744 {"extra-para", 0x632100, 0x01000},
1745 {"soft-version", 0x640000, 0x01000},
1746 {"support-list", 0x641000, 0x01000},
1747 {"profile", 0x642000, 0x08000},
1748 {"user-config", 0x650000, 0x10000},
1749 {"default-config", 0x660000, 0x10000},
1750 {"default-nvm", 0x670000, 0xc0000},
1751 {"default-pib", 0x730000, 0x40000},
1752 {"default-mac", 0x7e0000, 0x00020},
1753 {"pin", 0x7e0100, 0x00020},
1754 {"device-id", 0x7e0200, 0x00030},
1755 {"product-info", 0x7e1100, 0x01000},
1756 {"radio", 0x7f0000, 0x10000},
1760 .first_sysupgrade_partition
= "os-image",
1761 .last_sysupgrade_partition
= "file-system"
1764 /** Firmware layout for the TL-WPA8630P v2.1 (EU)*/
1766 .id
= "TL-WPA8630P-V2.1-EU",
1770 "{product_name:TL-WPA8630P,product_ver:2.1.0,special_id:45550000}\n",
1775 {"factory-uboot", 0x00000, 0x20000},
1776 {"fs-uboot", 0x20000, 0x20000},
1777 {"firmware", 0x40000, 0x5e0000},
1778 {"extra-para", 0x680000, 0x01000},
1779 {"product-info", 0x690000, 0x01000},
1780 {"partition-table", 0x6a0000, 0x02000},
1781 {"soft-version", 0x6b0000, 0x01000},
1782 {"support-list", 0x6b1000, 0x01000},
1783 {"profile", 0x6b2000, 0x08000},
1784 {"user-config", 0x6c0000, 0x10000},
1785 {"default-config", 0x6d0000, 0x10000},
1786 {"default-nvm", 0x6e0000, 0xc0000},
1787 {"default-pib", 0x7a0000, 0x40000},
1788 {"default-mac", 0x7e0000, 0x00020},
1789 {"pin", 0x7e0100, 0x00020},
1790 {"device-id", 0x7e0200, 0x00030},
1791 {"radio", 0x7f0000, 0x10000},
1795 .first_sysupgrade_partition
= "os-image",
1796 .last_sysupgrade_partition
= "file-system"
1799 /** Firmware layout for the TL-WR1043 v5 */
1801 .id
= "TLWR1043NV5",
1805 "{product_name:TL-WR1043N,product_ver:5.0.0,special_id:45550000}\n"
1806 "{product_name:TL-WR1043N,product_ver:5.0.0,special_id:55530000}\n",
1808 .soft_ver
= "soft_ver:1.0.0\n",
1810 {"factory-boot", 0x00000, 0x20000},
1811 {"fs-uboot", 0x20000, 0x20000},
1812 {"firmware", 0x40000, 0xec0000},
1813 {"default-mac", 0xf00000, 0x00200},
1814 {"pin", 0xf00200, 0x00200},
1815 {"device-id", 0xf00400, 0x00100},
1816 {"product-info", 0xf00500, 0x0fb00},
1817 {"soft-version", 0xf10000, 0x01000},
1818 {"extra-para", 0xf11000, 0x01000},
1819 {"support-list", 0xf12000, 0x0a000},
1820 {"profile", 0xf1c000, 0x04000},
1821 {"default-config", 0xf20000, 0x10000},
1822 {"user-config", 0xf30000, 0x40000},
1823 {"qos-db", 0xf70000, 0x40000},
1824 {"certificate", 0xfb0000, 0x10000},
1825 {"partition-table", 0xfc0000, 0x10000},
1826 {"log", 0xfd0000, 0x20000},
1827 {"radio", 0xff0000, 0x10000},
1830 .first_sysupgrade_partition
= "os-image",
1831 .last_sysupgrade_partition
= "file-system"
1834 /** Firmware layout for the TL-WR1043 v4 */
1836 .id
= "TLWR1043NDV4",
1840 "{product_name:TL-WR1043ND,product_ver:4.0.0,special_id:45550000}\n",
1844 /* We're using a dynamic kernel/rootfs split here */
1846 {"fs-uboot", 0x00000, 0x20000},
1847 {"firmware", 0x20000, 0xf30000},
1848 {"default-mac", 0xf50000, 0x00200},
1849 {"pin", 0xf50200, 0x00200},
1850 {"product-info", 0xf50400, 0x0fc00},
1851 {"soft-version", 0xf60000, 0x0b000},
1852 {"support-list", 0xf6b000, 0x04000},
1853 {"profile", 0xf70000, 0x04000},
1854 {"default-config", 0xf74000, 0x0b000},
1855 {"user-config", 0xf80000, 0x40000},
1856 {"partition-table", 0xfc0000, 0x10000},
1857 {"log", 0xfd0000, 0x20000},
1858 {"radio", 0xff0000, 0x10000},
1862 .first_sysupgrade_partition
= "os-image",
1863 .last_sysupgrade_partition
= "file-system"
1866 /** Firmware layout for the TL-WR902AC v1 */
1868 .id
= "TL-WR902AC-V1",
1872 "{product_name:TL-WR902AC,product_ver:1.0.0,special_id:45550000}\n"
1873 "{product_name:TL-WR902AC,product_ver:1.0.0,special_id:55530000}\n",
1878 384KB were moved from file-system to os-image
1879 in comparison to the stock image
1882 {"fs-uboot", 0x00000, 0x20000},
1883 {"firmware", 0x20000, 0x730000},
1884 {"default-mac", 0x750000, 0x00200},
1885 {"pin", 0x750200, 0x00200},
1886 {"product-info", 0x750400, 0x0fc00},
1887 {"soft-version", 0x760000, 0x0b000},
1888 {"support-list", 0x76b000, 0x04000},
1889 {"profile", 0x770000, 0x04000},
1890 {"default-config", 0x774000, 0x0b000},
1891 {"user-config", 0x780000, 0x40000},
1892 {"partition-table", 0x7c0000, 0x10000},
1893 {"log", 0x7d0000, 0x20000},
1894 {"radio", 0x7f0000, 0x10000},
1898 .first_sysupgrade_partition
= "os-image",
1899 .last_sysupgrade_partition
= "file-system",
1902 /** Firmware layout for the TL-WR942N V1 */
1908 "{product_name:TL-WR942N,product_ver:1.0.0,special_id:00000000}\r\n"
1909 "{product_name:TL-WR942N,product_ver:1.0.0,special_id:52550000}\r\n",
1914 {"fs-uboot", 0x00000, 0x20000},
1915 {"firmware", 0x20000, 0xe20000},
1916 {"default-mac", 0xe40000, 0x00200},
1917 {"pin", 0xe40200, 0x00200},
1918 {"product-info", 0xe40400, 0x0fc00},
1919 {"partition-table", 0xe50000, 0x10000},
1920 {"soft-version", 0xe60000, 0x10000},
1921 {"support-list", 0xe70000, 0x10000},
1922 {"profile", 0xe80000, 0x10000},
1923 {"default-config", 0xe90000, 0x10000},
1924 {"user-config", 0xea0000, 0x40000},
1925 {"qos-db", 0xee0000, 0x40000},
1926 {"certificate", 0xf20000, 0x10000},
1927 {"usb-config", 0xfb0000, 0x10000},
1928 {"log", 0xfc0000, 0x20000},
1929 {"radio-bk", 0xfe0000, 0x10000},
1930 {"radio", 0xff0000, 0x10000},
1934 .first_sysupgrade_partition
= "os-image",
1935 .last_sysupgrade_partition
= "file-system",
1938 /** Firmware layout for the RE200 v2 */
1944 "{product_name:RE200,product_ver:2.0.0,special_id:00000000}\n"
1945 "{product_name:RE200,product_ver:2.0.0,special_id:41520000}\n"
1946 "{product_name:RE200,product_ver:2.0.0,special_id:41550000}\n"
1947 "{product_name:RE200,product_ver:2.0.0,special_id:42520000}\n"
1948 "{product_name:RE200,product_ver:2.0.0,special_id:43410000}\n"
1949 "{product_name:RE200,product_ver:2.0.0,special_id:45530000}\n"
1950 "{product_name:RE200,product_ver:2.0.0,special_id:45550000}\n"
1951 "{product_name:RE200,product_ver:2.0.0,special_id:49440000}\n"
1952 "{product_name:RE200,product_ver:2.0.0,special_id:4a500000}\n"
1953 "{product_name:RE200,product_ver:2.0.0,special_id:4b520000}\n"
1954 "{product_name:RE200,product_ver:2.0.0,special_id:52550000}\n"
1955 "{product_name:RE200,product_ver:2.0.0,special_id:54570000}\n"
1956 "{product_name:RE200,product_ver:2.0.0,special_id:55530000}\n",
1961 {"fs-uboot", 0x00000, 0x20000},
1962 {"firmware", 0x20000, 0x7a0000},
1963 {"partition-table", 0x7c0000, 0x02000},
1964 {"default-mac", 0x7c2000, 0x00020},
1965 {"pin", 0x7c2100, 0x00020},
1966 {"product-info", 0x7c3100, 0x01000},
1967 {"soft-version", 0x7c4200, 0x01000},
1968 {"support-list", 0x7c5200, 0x01000},
1969 {"profile", 0x7c6200, 0x08000},
1970 {"config-info", 0x7ce200, 0x00400},
1971 {"user-config", 0x7d0000, 0x10000},
1972 {"default-config", 0x7e0000, 0x10000},
1973 {"radio", 0x7f0000, 0x10000},
1977 .first_sysupgrade_partition
= "os-image",
1978 .last_sysupgrade_partition
= "file-system"
1981 /** Firmware layout for the RE200 v3 */
1987 "{product_name:RE200,product_ver:3.0.0,special_id:00000000}\n"
1988 "{product_name:RE200,product_ver:3.0.0,special_id:41520000}\n"
1989 "{product_name:RE200,product_ver:3.0.0,special_id:41550000}\n"
1990 "{product_name:RE200,product_ver:3.0.0,special_id:42520000}\n"
1991 "{product_name:RE200,product_ver:3.0.0,special_id:43410000}\n"
1992 "{product_name:RE200,product_ver:3.0.0,special_id:45470000}\n"
1993 "{product_name:RE200,product_ver:3.0.0,special_id:45530000}\n"
1994 "{product_name:RE200,product_ver:3.0.0,special_id:45550000}\n"
1995 "{product_name:RE200,product_ver:3.0.0,special_id:49440000}\n"
1996 "{product_name:RE200,product_ver:3.0.0,special_id:4A500000}\n"
1997 "{product_name:RE200,product_ver:3.0.0,special_id:4B520000}\n"
1998 "{product_name:RE200,product_ver:3.0.0,special_id:52550000}\n"
1999 "{product_name:RE200,product_ver:3.0.0,special_id:54570000}\n"
2000 "{product_name:RE200,product_ver:3.0.0,special_id:55530000}\n",
2005 {"fs-uboot", 0x00000, 0x20000},
2006 {"firmware", 0x20000, 0x7a0000},
2007 {"partition-table", 0x7c0000, 0x02000},
2008 {"default-mac", 0x7c2000, 0x00020},
2009 {"pin", 0x7c2100, 0x00020},
2010 {"product-info", 0x7c3100, 0x01000},
2011 {"soft-version", 0x7c4200, 0x01000},
2012 {"support-list", 0x7c5200, 0x01000},
2013 {"profile", 0x7c6200, 0x08000},
2014 {"config-info", 0x7ce200, 0x00400},
2015 {"user-config", 0x7d0000, 0x10000},
2016 {"default-config", 0x7e0000, 0x10000},
2017 {"radio", 0x7f0000, 0x10000},
2021 .first_sysupgrade_partition
= "os-image",
2022 .last_sysupgrade_partition
= "file-system"
2025 /** Firmware layout for the RE200 v4 */
2031 "{product_name:RE200,product_ver:4.0.0,special_id:00000000}\n"
2032 "{product_name:RE200,product_ver:4.0.0,special_id:45550000}\n"
2033 "{product_name:RE200,product_ver:4.0.0,special_id:4A500000}\n"
2034 "{product_name:RE200,product_ver:4.0.0,special_id:4B520000}\n"
2035 "{product_name:RE200,product_ver:4.0.0,special_id:43410000}\n"
2036 "{product_name:RE200,product_ver:4.0.0,special_id:41550000}\n"
2037 "{product_name:RE200,product_ver:4.0.0,special_id:42520000}\n"
2038 "{product_name:RE200,product_ver:4.0.0,special_id:55530000}\n"
2039 "{product_name:RE200,product_ver:4.0.0,special_id:41520000}\n"
2040 "{product_name:RE200,product_ver:4.0.0,special_id:52550000}\n"
2041 "{product_name:RE200,product_ver:4.0.0,special_id:54570000}\n"
2042 "{product_name:RE200,product_ver:4.0.0,special_id:45530000}\n"
2043 "{product_name:RE200,product_ver:4.0.0,special_id:49440000}\n"
2044 "{product_name:RE200,product_ver:4.0.0,special_id:45470000}\n",
2046 .soft_ver
= "soft_ver:1.1.0\n",
2049 {"fs-uboot", 0x00000, 0x20000},
2050 {"firmware", 0x20000, 0x7a0000},
2051 {"partition-table", 0x7c0000, 0x02000},
2052 {"default-mac", 0x7c2000, 0x00020},
2053 {"pin", 0x7c2100, 0x00020},
2054 {"product-info", 0x7c3100, 0x01000},
2055 {"soft-version", 0x7c4200, 0x01000},
2056 {"support-list", 0x7c5200, 0x01000},
2057 {"profile", 0x7c6200, 0x08000},
2058 {"config-info", 0x7ce200, 0x00400},
2059 {"user-config", 0x7d0000, 0x10000},
2060 {"default-config", 0x7e0000, 0x10000},
2061 {"radio", 0x7f0000, 0x10000},
2065 .first_sysupgrade_partition
= "os-image",
2066 .last_sysupgrade_partition
= "file-system"
2069 /** Firmware layout for the RE220 v2 */
2075 "{product_name:RE220,product_ver:2.0.0,special_id:00000000}\n"
2076 "{product_name:RE220,product_ver:2.0.0,special_id:41520000}\n"
2077 "{product_name:RE220,product_ver:2.0.0,special_id:41550000}\n"
2078 "{product_name:RE220,product_ver:2.0.0,special_id:42520000}\n"
2079 "{product_name:RE220,product_ver:2.0.0,special_id:43410000}\n"
2080 "{product_name:RE220,product_ver:2.0.0,special_id:45530000}\n"
2081 "{product_name:RE220,product_ver:2.0.0,special_id:45550000}\n"
2082 "{product_name:RE220,product_ver:2.0.0,special_id:49440000}\n"
2083 "{product_name:RE220,product_ver:2.0.0,special_id:4a500000}\n"
2084 "{product_name:RE220,product_ver:2.0.0,special_id:4b520000}\n"
2085 "{product_name:RE220,product_ver:2.0.0,special_id:52550000}\n"
2086 "{product_name:RE220,product_ver:2.0.0,special_id:54570000}\n"
2087 "{product_name:RE220,product_ver:2.0.0,special_id:55530000}\n",
2092 {"fs-uboot", 0x00000, 0x20000},
2093 {"firmware", 0x20000, 0x7a0000},
2094 {"partition-table", 0x7c0000, 0x02000},
2095 {"default-mac", 0x7c2000, 0x00020},
2096 {"pin", 0x7c2100, 0x00020},
2097 {"product-info", 0x7c3100, 0x01000},
2098 {"soft-version", 0x7c4200, 0x01000},
2099 {"support-list", 0x7c5200, 0x01000},
2100 {"profile", 0x7c6200, 0x08000},
2101 {"config-info", 0x7ce200, 0x00400},
2102 {"user-config", 0x7d0000, 0x10000},
2103 {"default-config", 0x7e0000, 0x10000},
2104 {"radio", 0x7f0000, 0x10000},
2108 .first_sysupgrade_partition
= "os-image",
2109 .last_sysupgrade_partition
= "file-system"
2112 /** Firmware layout for the RE305 v1 */
2118 "{product_name:RE305,product_ver:1.0.0,special_id:45550000}\n"
2119 "{product_name:RE305,product_ver:1.0.0,special_id:55530000}\n"
2120 "{product_name:RE305,product_ver:1.0.0,special_id:4a500000}\n"
2121 "{product_name:RE305,product_ver:1.0.0,special_id:42520000}\n"
2122 "{product_name:RE305,product_ver:1.0.0,special_id:4b520000}\n"
2123 "{product_name:RE305,product_ver:1.0.0,special_id:41550000}\n"
2124 "{product_name:RE305,product_ver:1.0.0,special_id:43410000}\n",
2129 {"fs-uboot", 0x00000, 0x20000},
2130 {"firmware", 0x20000, 0x5e0000},
2131 {"partition-table", 0x600000, 0x02000},
2132 {"default-mac", 0x610000, 0x00020},
2133 {"pin", 0x610100, 0x00020},
2134 {"product-info", 0x611100, 0x01000},
2135 {"soft-version", 0x620000, 0x01000},
2136 {"support-list", 0x621000, 0x01000},
2137 {"profile", 0x622000, 0x08000},
2138 {"user-config", 0x630000, 0x10000},
2139 {"default-config", 0x640000, 0x10000},
2140 {"radio", 0x7f0000, 0x10000},
2144 .first_sysupgrade_partition
= "os-image",
2145 .last_sysupgrade_partition
= "file-system"
2148 /** Firmware layout for the RE350 v1 */
2154 "{product_name:RE350,product_ver:1.0.0,special_id:45550000}\n"
2155 "{product_name:RE350,product_ver:1.0.0,special_id:00000000}\n"
2156 "{product_name:RE350,product_ver:1.0.0,special_id:41550000}\n"
2157 "{product_name:RE350,product_ver:1.0.0,special_id:55530000}\n"
2158 "{product_name:RE350,product_ver:1.0.0,special_id:43410000}\n"
2159 "{product_name:RE350,product_ver:1.0.0,special_id:4b520000}\n"
2160 "{product_name:RE350,product_ver:1.0.0,special_id:4a500000}\n",
2164 /** We're using a dynamic kernel/rootfs split here */
2166 {"fs-uboot", 0x00000, 0x20000},
2167 {"firmware", 0x20000, 0x5e0000},
2168 {"partition-table", 0x600000, 0x02000},
2169 {"default-mac", 0x610000, 0x00020},
2170 {"pin", 0x610100, 0x00020},
2171 {"product-info", 0x611100, 0x01000},
2172 {"soft-version", 0x620000, 0x01000},
2173 {"support-list", 0x621000, 0x01000},
2174 {"profile", 0x622000, 0x08000},
2175 {"user-config", 0x630000, 0x10000},
2176 {"default-config", 0x640000, 0x10000},
2177 {"radio", 0x7f0000, 0x10000},
2181 .first_sysupgrade_partition
= "os-image",
2182 .last_sysupgrade_partition
= "file-system"
2185 /** Firmware layout for the RE350K v1 */
2191 "{product_name:RE350K,product_ver:1.0.0,special_id:00000000,product_region:US}\n",
2195 /** We're using a dynamic kernel/rootfs split here */
2197 {"fs-uboot", 0x00000, 0x20000},
2198 {"firmware", 0x20000, 0xd70000},
2199 {"partition-table", 0xd90000, 0x02000},
2200 {"default-mac", 0xda0000, 0x00020},
2201 {"pin", 0xda0100, 0x00020},
2202 {"product-info", 0xda1100, 0x01000},
2203 {"soft-version", 0xdb0000, 0x01000},
2204 {"support-list", 0xdb1000, 0x01000},
2205 {"profile", 0xdb2000, 0x08000},
2206 {"user-config", 0xdc0000, 0x10000},
2207 {"default-config", 0xdd0000, 0x10000},
2208 {"device-id", 0xde0000, 0x00108},
2209 {"radio", 0xff0000, 0x10000},
2213 .first_sysupgrade_partition
= "os-image",
2214 .last_sysupgrade_partition
= "file-system"
2217 /** Firmware layout for the RE355 */
2223 "{product_name:RE355,product_ver:1.0.0,special_id:00000000}\r\n"
2224 "{product_name:RE355,product_ver:1.0.0,special_id:55530000}\r\n"
2225 "{product_name:RE355,product_ver:1.0.0,special_id:45550000}\r\n"
2226 "{product_name:RE355,product_ver:1.0.0,special_id:4A500000}\r\n"
2227 "{product_name:RE355,product_ver:1.0.0,special_id:43410000}\r\n"
2228 "{product_name:RE355,product_ver:1.0.0,special_id:41550000}\r\n"
2229 "{product_name:RE355,product_ver:1.0.0,special_id:4B520000}\r\n"
2230 "{product_name:RE355,product_ver:1.0.0,special_id:55534100}\r\n",
2234 /* We're using a dynamic kernel/rootfs split here */
2236 {"fs-uboot", 0x00000, 0x20000},
2237 {"firmware", 0x20000, 0x5e0000},
2238 {"partition-table", 0x600000, 0x02000},
2239 {"default-mac", 0x610000, 0x00020},
2240 {"pin", 0x610100, 0x00020},
2241 {"product-info", 0x611100, 0x01000},
2242 {"soft-version", 0x620000, 0x01000},
2243 {"support-list", 0x621000, 0x01000},
2244 {"profile", 0x622000, 0x08000},
2245 {"user-config", 0x630000, 0x10000},
2246 {"default-config", 0x640000, 0x10000},
2247 {"radio", 0x7f0000, 0x10000},
2251 .first_sysupgrade_partition
= "os-image",
2252 .last_sysupgrade_partition
= "file-system"
2255 /** Firmware layout for the RE450 */
2261 "{product_name:RE450,product_ver:1.0.0,special_id:00000000}\r\n"
2262 "{product_name:RE450,product_ver:1.0.0,special_id:55530000}\r\n"
2263 "{product_name:RE450,product_ver:1.0.0,special_id:45550000}\r\n"
2264 "{product_name:RE450,product_ver:1.0.0,special_id:4A500000}\r\n"
2265 "{product_name:RE450,product_ver:1.0.0,special_id:43410000}\r\n"
2266 "{product_name:RE450,product_ver:1.0.0,special_id:41550000}\r\n"
2267 "{product_name:RE450,product_ver:1.0.0,special_id:4B520000}\r\n"
2268 "{product_name:RE450,product_ver:1.0.0,special_id:55534100}\r\n",
2272 /** We're using a dynamic kernel/rootfs split here */
2274 {"fs-uboot", 0x00000, 0x20000},
2275 {"firmware", 0x20000, 0x5e0000},
2276 {"partition-table", 0x600000, 0x02000},
2277 {"default-mac", 0x610000, 0x00020},
2278 {"pin", 0x610100, 0x00020},
2279 {"product-info", 0x611100, 0x01000},
2280 {"soft-version", 0x620000, 0x01000},
2281 {"support-list", 0x621000, 0x01000},
2282 {"profile", 0x622000, 0x08000},
2283 {"user-config", 0x630000, 0x10000},
2284 {"default-config", 0x640000, 0x10000},
2285 {"radio", 0x7f0000, 0x10000},
2289 .first_sysupgrade_partition
= "os-image",
2290 .last_sysupgrade_partition
= "file-system"
2293 /** Firmware layout for the RE450 v2 */
2299 "{product_name:RE450,product_ver:2.0.0,special_id:00000000}\r\n"
2300 "{product_name:RE450,product_ver:2.0.0,special_id:55530000}\r\n"
2301 "{product_name:RE450,product_ver:2.0.0,special_id:45550000}\r\n"
2302 "{product_name:RE450,product_ver:2.0.0,special_id:4A500000}\r\n"
2303 "{product_name:RE450,product_ver:2.0.0,special_id:43410000}\r\n"
2304 "{product_name:RE450,product_ver:2.0.0,special_id:41550000}\r\n"
2305 "{product_name:RE450,product_ver:2.0.0,special_id:41530000}\r\n"
2306 "{product_name:RE450,product_ver:2.0.0,special_id:4B520000}\r\n"
2307 "{product_name:RE450,product_ver:2.0.0,special_id:42520000}\r\n",
2311 /* We're using a dynamic kernel/rootfs split here */
2313 {"fs-uboot", 0x00000, 0x20000},
2314 {"firmware", 0x20000, 0x5e0000},
2315 {"partition-table", 0x600000, 0x02000},
2316 {"default-mac", 0x610000, 0x00020},
2317 {"pin", 0x610100, 0x00020},
2318 {"product-info", 0x611100, 0x01000},
2319 {"soft-version", 0x620000, 0x01000},
2320 {"support-list", 0x621000, 0x01000},
2321 {"profile", 0x622000, 0x08000},
2322 {"user-config", 0x630000, 0x10000},
2323 {"default-config", 0x640000, 0x10000},
2324 {"radio", 0x7f0000, 0x10000},
2328 .first_sysupgrade_partition
= "os-image",
2329 .last_sysupgrade_partition
= "file-system"
2332 /** Firmware layout for the RE450 v3 */
2338 "{product_name:RE450,product_ver:3.0.0,special_id:00000000}\r\n"
2339 "{product_name:RE450,product_ver:3.0.0,special_id:55530000}\r\n"
2340 "{product_name:RE450,product_ver:3.0.0,special_id:45550000}\r\n"
2341 "{product_name:RE450,product_ver:3.0.0,special_id:4A500000}\r\n"
2342 "{product_name:RE450,product_ver:3.0.0,special_id:43410000}\r\n"
2343 "{product_name:RE450,product_ver:3.0.0,special_id:41550000}\r\n"
2344 "{product_name:RE450,product_ver:3.0.0,special_id:41530000}\r\n"
2345 "{product_name:RE450,product_ver:3.0.0,special_id:4B520000}\r\n"
2346 "{product_name:RE450,product_ver:3.0.0,special_id:42520000}\r\n",
2350 /* We're using a dynamic kernel/rootfs split here */
2352 {"fs-uboot", 0x00000, 0x20000},
2353 {"default-mac", 0x20000, 0x00020},
2354 {"pin", 0x20020, 0x00020},
2355 {"product-info", 0x21000, 0x01000},
2356 {"partition-table", 0x22000, 0x02000},
2357 {"soft-version", 0x24000, 0x01000},
2358 {"support-list", 0x25000, 0x01000},
2359 {"profile", 0x26000, 0x08000},
2360 {"user-config", 0x2e000, 0x10000},
2361 {"default-config", 0x3e000, 0x10000},
2362 {"config-info", 0x4e000, 0x00400},
2363 {"firmware", 0x50000, 0x7a0000},
2364 {"radio", 0x7f0000, 0x10000},
2368 .first_sysupgrade_partition
= "os-image",
2369 .last_sysupgrade_partition
= "file-system"
2372 /** Firmware layout for the RE500 */
2378 "{product_name:RE500,product_ver:1.0.0,special_id:00000000}\r\n"
2379 "{product_name:RE500,product_ver:1.0.0,special_id:55530000}\r\n"
2380 "{product_name:RE500,product_ver:1.0.0,special_id:45550000}\r\n"
2381 "{product_name:RE500,product_ver:1.0.0,special_id:4A500000}\r\n"
2382 "{product_name:RE500,product_ver:1.0.0,special_id:43410000}\r\n"
2383 "{product_name:RE500,product_ver:1.0.0,special_id:41550000}\r\n"
2384 "{product_name:RE500,product_ver:1.0.0,special_id:41530000}\r\n",
2388 /* We're using a dynamic kernel/rootfs split here */
2390 {"fs-uboot", 0x00000, 0x20000},
2391 {"firmware", 0x20000, 0xde0000},
2392 {"partition-table", 0xe00000, 0x02000},
2393 {"default-mac", 0xe10000, 0x00020},
2394 {"pin", 0xe10100, 0x00020},
2395 {"product-info", 0xe11100, 0x01000},
2396 {"soft-version", 0xe20000, 0x01000},
2397 {"support-list", 0xe21000, 0x01000},
2398 {"profile", 0xe22000, 0x08000},
2399 {"user-config", 0xe30000, 0x10000},
2400 {"default-config", 0xe40000, 0x10000},
2401 {"radio", 0xff0000, 0x10000},
2405 .first_sysupgrade_partition
= "os-image",
2406 .last_sysupgrade_partition
= "file-system"
2409 /** Firmware layout for the RE650 */
2415 "{product_name:RE650,product_ver:1.0.0,special_id:00000000}\r\n"
2416 "{product_name:RE650,product_ver:1.0.0,special_id:55530000}\r\n"
2417 "{product_name:RE650,product_ver:1.0.0,special_id:45550000}\r\n"
2418 "{product_name:RE650,product_ver:1.0.0,special_id:4A500000}\r\n"
2419 "{product_name:RE650,product_ver:1.0.0,special_id:43410000}\r\n"
2420 "{product_name:RE650,product_ver:1.0.0,special_id:41550000}\r\n"
2421 "{product_name:RE650,product_ver:1.0.0,special_id:41530000}\r\n",
2425 /* We're using a dynamic kernel/rootfs split here */
2427 {"fs-uboot", 0x00000, 0x20000},
2428 {"firmware", 0x20000, 0xde0000},
2429 {"partition-table", 0xe00000, 0x02000},
2430 {"default-mac", 0xe10000, 0x00020},
2431 {"pin", 0xe10100, 0x00020},
2432 {"product-info", 0xe11100, 0x01000},
2433 {"soft-version", 0xe20000, 0x01000},
2434 {"support-list", 0xe21000, 0x01000},
2435 {"profile", 0xe22000, 0x08000},
2436 {"user-config", 0xe30000, 0x10000},
2437 {"default-config", 0xe40000, 0x10000},
2438 {"radio", 0xff0000, 0x10000},
2442 .first_sysupgrade_partition
= "os-image",
2443 .last_sysupgrade_partition
= "file-system"
2449 #define error(_ret, _errno, _str, ...) \
2451 fprintf(stderr, _str ": %s\n", ## __VA_ARGS__, \
2452 strerror(_errno)); \
2458 /** Stores a uint32 as big endian */
2459 static inline void put32(uint8_t *buf
, uint32_t val
) {
2466 static inline bool meta_partition_should_pad(enum partition_trail_value pv
)
2468 return (pv
>= 0) && (pv
<= PART_TRAIL_MAX
);
2471 /** Allocate a padded meta partition with a correctly initialised header
2472 * If the `data` pointer is NULL, then the required space is only allocated,
2473 * otherwise `data_len` bytes will be copied from `data` into the partition
2475 static struct image_partition_entry
init_meta_partition_entry(
2476 const char *name
, const void *data
, uint32_t data_len
,
2477 enum partition_trail_value pad_value
)
2479 uint32_t total_len
= sizeof(struct meta_header
) + data_len
;
2480 if (meta_partition_should_pad(pad_value
))
2483 struct image_partition_entry entry
= {
2486 .data
= malloc(total_len
)
2489 error(1, errno
, "failed to allocate meta partition entry");
2491 struct meta_header
*header
= (struct meta_header
*)entry
.data
;
2492 header
->length
= htonl(data_len
);
2496 memcpy(entry
.data
+sizeof(*header
), data
, data_len
);
2498 if (meta_partition_should_pad(pad_value
))
2499 entry
.data
[total_len
- 1] = (uint8_t) pad_value
;
2504 /** Allocates a new image partition */
2505 static struct image_partition_entry
alloc_image_partition(const char *name
, size_t len
) {
2506 struct image_partition_entry entry
= {name
, len
, malloc(len
)};
2508 error(1, errno
, "malloc");
2513 /** Frees an image partition */
2514 static void free_image_partition(struct image_partition_entry entry
) {
2518 static time_t source_date_epoch
= -1;
2519 static void set_source_date_epoch() {
2520 char *env
= getenv("SOURCE_DATE_EPOCH");
2524 source_date_epoch
= strtoull(env
, &endptr
, 10);
2525 if (errno
|| (endptr
&& *endptr
!= '\0')) {
2526 fprintf(stderr
, "Invalid SOURCE_DATE_EPOCH");
2532 /** Generates the partition-table partition */
2533 static struct image_partition_entry
make_partition_table(const struct flash_partition_entry
*p
) {
2534 struct image_partition_entry entry
= alloc_image_partition("partition-table", 0x800);
2536 char *s
= (char *)entry
.data
, *end
= (char *)(s
+entry
.size
);
2544 for (i
= 0; p
[i
].name
; i
++) {
2546 size_t w
= snprintf(s
, len
, "partition %s base 0x%05x size 0x%05x\n", p
[i
].name
, p
[i
].base
, p
[i
].size
);
2549 error(1, 0, "flash partition table overflow?");
2556 memset(s
, 0xff, end
-s
);
2562 /** Generates a binary-coded decimal representation of an integer in the range [0, 99] */
2563 static inline uint8_t bcd(uint8_t v
) {
2564 return 0x10 * (v
/10) + v
%10;
2568 /** Generates the soft-version partition */
2569 static struct image_partition_entry
make_soft_version(
2570 const struct device_info
*info
, uint32_t rev
)
2572 /** If an info string is provided, use this instead of
2573 * the structured data, and include the null-termination */
2574 if (info
->soft_ver
) {
2575 uint32_t len
= strlen(info
->soft_ver
) + 1;
2576 return init_meta_partition_entry("soft-version",
2577 info
->soft_ver
, len
, info
->part_trail
);
2582 if (source_date_epoch
!= -1)
2583 t
= source_date_epoch
;
2584 else if (time(&t
) == (time_t)(-1))
2585 error(1, errno
, "time");
2587 struct tm
*tm
= gmtime(&t
);
2589 struct soft_version s
= {
2596 .year_hi
= bcd((1900+tm
->tm_year
)/100),
2597 .year_lo
= bcd(tm
->tm_year
%100),
2598 .month
= bcd(tm
->tm_mon
+1),
2599 .day
= bcd(tm
->tm_mday
),
2601 .compat_level
= htonl(info
->soft_ver_compat_level
)
2604 if (info
->soft_ver_compat_level
== 0)
2605 return init_meta_partition_entry("soft-version", &s
,
2606 (uint8_t *)(&s
.compat_level
) - (uint8_t *)(&s
),
2609 return init_meta_partition_entry("soft-version", &s
,
2610 sizeof(s
), info
->part_trail
);
2613 /** Generates the support-list partition */
2614 static struct image_partition_entry
make_support_list(
2615 const struct device_info
*info
)
2617 uint32_t len
= strlen(info
->support_list
);
2618 return init_meta_partition_entry("support-list", info
->support_list
,
2619 len
, info
->part_trail
);
2622 /** Partition with extra-para data */
2623 static struct image_partition_entry
make_extra_para(
2624 const struct device_info
*info
, const uint8_t *extra_para
, size_t len
)
2626 return init_meta_partition_entry("extra-para", extra_para
, len
,
2630 /** Creates a new image partition with an arbitrary name from a file */
2631 static struct image_partition_entry
read_file(const char *part_name
, const char *filename
, bool add_jffs2_eof
, struct flash_partition_entry
*file_system_partition
) {
2632 struct stat statbuf
;
2634 if (stat(filename
, &statbuf
) < 0)
2635 error(1, errno
, "unable to stat file `%s'", filename
);
2637 size_t len
= statbuf
.st_size
;
2639 if (add_jffs2_eof
) {
2640 if (file_system_partition
)
2641 len
= ALIGN(len
+ file_system_partition
->base
, 0x10000) + sizeof(jffs2_eof_mark
) - file_system_partition
->base
;
2643 len
= ALIGN(len
, 0x10000) + sizeof(jffs2_eof_mark
);
2646 struct image_partition_entry entry
= alloc_image_partition(part_name
, len
);
2648 FILE *file
= fopen(filename
, "rb");
2650 error(1, errno
, "unable to open file `%s'", filename
);
2652 if (fread(entry
.data
, statbuf
.st_size
, 1, file
) != 1)
2653 error(1, errno
, "unable to read file `%s'", filename
);
2655 if (add_jffs2_eof
) {
2656 uint8_t *eof
= entry
.data
+ statbuf
.st_size
, *end
= entry
.data
+entry
.size
;
2658 memset(eof
, 0xff, end
- eof
- sizeof(jffs2_eof_mark
));
2659 memcpy(end
- sizeof(jffs2_eof_mark
), jffs2_eof_mark
, sizeof(jffs2_eof_mark
));
2668 Copies a list of image partitions into an image buffer and generates the image partition table while doing so
2670 Example image partition table:
2672 fwup-ptn partition-table base 0x00800 size 0x00800
2673 fwup-ptn os-image base 0x01000 size 0x113b45
2674 fwup-ptn file-system base 0x114b45 size 0x1d0004
2675 fwup-ptn support-list base 0x2e4b49 size 0x000d1
2677 Each line of the partition table is terminated with the bytes 09 0d 0a ("\t\r\n"),
2678 the end of the partition table is marked with a zero byte.
2680 The firmware image must contain at least the partition-table and support-list partitions
2681 to be accepted. There aren't any alignment constraints for the image partitions.
2683 The partition-table partition contains the actual flash layout; partitions
2684 from the image partition table are mapped to the corresponding flash partitions during
2685 the firmware upgrade. The support-list partition contains a list of devices supported by
2688 The base offsets in the firmware partition table are relative to the end
2689 of the vendor information block, so the partition-table partition will
2690 actually start at offset 0x1814 of the image.
2692 I think partition-table must be the first partition in the firmware image.
2694 static void put_partitions(uint8_t *buffer
, const struct flash_partition_entry
*flash_parts
, const struct image_partition_entry
*parts
) {
2696 char *image_pt
= (char *)buffer
, *end
= image_pt
+ 0x800;
2698 size_t base
= 0x800;
2699 for (i
= 0; parts
[i
].name
; i
++) {
2700 for (j
= 0; flash_parts
[j
].name
; j
++) {
2701 if (!strcmp(flash_parts
[j
].name
, parts
[i
].name
)) {
2702 if (parts
[i
].size
> flash_parts
[j
].size
)
2703 error(1, 0, "%s partition too big (more than %u bytes)", flash_parts
[j
].name
, (unsigned)flash_parts
[j
].size
);
2708 assert(flash_parts
[j
].name
);
2710 memcpy(buffer
+ base
, parts
[i
].data
, parts
[i
].size
);
2712 size_t len
= end
-image_pt
;
2713 size_t w
= snprintf(image_pt
, len
, "fwup-ptn %s base 0x%05x size 0x%05x\t\r\n", parts
[i
].name
, (unsigned)base
, (unsigned)parts
[i
].size
);
2716 error(1, 0, "image partition table overflow?");
2720 base
+= parts
[i
].size
;
2724 /** Generates and writes the image MD5 checksum */
2725 static void put_md5(uint8_t *md5
, uint8_t *buffer
, unsigned int len
) {
2729 MD5_Update(&ctx
, md5_salt
, (unsigned int)sizeof(md5_salt
));
2730 MD5_Update(&ctx
, buffer
, len
);
2731 MD5_Final(md5
, &ctx
);
2736 Generates the firmware image in factory format
2742 0000-0003 Image size (4 bytes, big endian)
2743 0004-0013 MD5 hash (hash of a 16 byte salt and the image data starting with byte 0x14)
2744 0014-0017 Vendor information length (without padding) (4 bytes, big endian)
2745 0018-1013 Vendor information (4092 bytes, padded with 0xff; there seem to be older
2746 (VxWorks-based) TP-LINK devices which use a smaller vendor information block)
2747 1014-1813 Image partition table (2048 bytes, padded with 0xff)
2748 1814-xxxx Firmware partitions
2750 static void * generate_factory_image(struct device_info
*info
, const struct image_partition_entry
*parts
, size_t *len
) {
2754 for (i
= 0; parts
[i
].name
; i
++)
2755 *len
+= parts
[i
].size
;
2757 uint8_t *image
= malloc(*len
);
2759 error(1, errno
, "malloc");
2761 memset(image
, 0xff, *len
);
2765 size_t vendor_len
= strlen(info
->vendor
);
2766 put32(image
+0x14, vendor_len
);
2767 memcpy(image
+0x18, info
->vendor
, vendor_len
);
2770 put_partitions(image
+ 0x1014, info
->partitions
, parts
);
2771 put_md5(image
+0x04, image
+0x14, *len
-0x14);
2777 Generates the firmware image in sysupgrade format
2779 This makes some assumptions about the provided flash and image partition tables and
2780 should be generalized when TP-LINK starts building its safeloader into hardware with
2781 different flash layouts.
2783 static void * generate_sysupgrade_image(struct device_info
*info
, const struct image_partition_entry
*image_parts
, size_t *len
) {
2785 size_t flash_first_partition_index
= 0;
2786 size_t flash_last_partition_index
= 0;
2787 const struct flash_partition_entry
*flash_first_partition
= NULL
;
2788 const struct flash_partition_entry
*flash_last_partition
= NULL
;
2789 const struct image_partition_entry
*image_last_partition
= NULL
;
2791 /** Find first and last partitions */
2792 for (i
= 0; info
->partitions
[i
].name
; i
++) {
2793 if (!strcmp(info
->partitions
[i
].name
, info
->first_sysupgrade_partition
)) {
2794 flash_first_partition
= &info
->partitions
[i
];
2795 flash_first_partition_index
= i
;
2796 } else if (!strcmp(info
->partitions
[i
].name
, info
->last_sysupgrade_partition
)) {
2797 flash_last_partition
= &info
->partitions
[i
];
2798 flash_last_partition_index
= i
;
2802 assert(flash_first_partition
&& flash_last_partition
);
2803 assert(flash_first_partition_index
< flash_last_partition_index
);
2805 /** Find last partition from image to calculate needed size */
2806 for (i
= 0; image_parts
[i
].name
; i
++) {
2807 if (!strcmp(image_parts
[i
].name
, info
->last_sysupgrade_partition
)) {
2808 image_last_partition
= &image_parts
[i
];
2813 assert(image_last_partition
);
2815 *len
= flash_last_partition
->base
- flash_first_partition
->base
+ image_last_partition
->size
;
2817 uint8_t *image
= malloc(*len
);
2819 error(1, errno
, "malloc");
2821 memset(image
, 0xff, *len
);
2823 for (i
= flash_first_partition_index
; i
<= flash_last_partition_index
; i
++) {
2824 for (j
= 0; image_parts
[j
].name
; j
++) {
2825 if (!strcmp(info
->partitions
[i
].name
, image_parts
[j
].name
)) {
2826 if (image_parts
[j
].size
> info
->partitions
[i
].size
)
2827 error(1, 0, "%s partition too big (more than %u bytes)", info
->partitions
[i
].name
, (unsigned)info
->partitions
[i
].size
);
2828 memcpy(image
+ info
->partitions
[i
].base
- flash_first_partition
->base
, image_parts
[j
].data
, image_parts
[j
].size
);
2832 assert(image_parts
[j
].name
);
2839 /** Generates an image according to a given layout and writes it to a file */
2840 static void build_image(const char *output
,
2841 const char *kernel_image
,
2842 const char *rootfs_image
,
2846 struct device_info
*info
) {
2850 struct image_partition_entry parts
[7] = {};
2852 struct flash_partition_entry
*firmware_partition
= NULL
;
2853 struct flash_partition_entry
*os_image_partition
= NULL
;
2854 struct flash_partition_entry
*file_system_partition
= NULL
;
2855 size_t firmware_partition_index
= 0;
2857 for (i
= 0; info
->partitions
[i
].name
; i
++) {
2858 if (!strcmp(info
->partitions
[i
].name
, "firmware"))
2860 firmware_partition
= &info
->partitions
[i
];
2861 firmware_partition_index
= i
;
2865 if (firmware_partition
)
2867 os_image_partition
= &info
->partitions
[firmware_partition_index
];
2868 file_system_partition
= &info
->partitions
[firmware_partition_index
+ 1];
2871 if (stat(kernel_image
, &kernel
) < 0)
2872 error(1, errno
, "unable to stat file `%s'", kernel_image
);
2874 if (kernel
.st_size
> firmware_partition
->size
)
2875 error(1, 0, "kernel overflowed firmware partition\n");
2877 for (i
= MAX_PARTITIONS
-1; i
>= firmware_partition_index
+ 1; i
--)
2878 info
->partitions
[i
+1] = info
->partitions
[i
];
2880 file_system_partition
->name
= "file-system";
2881 file_system_partition
->base
= firmware_partition
->base
+ kernel
.st_size
;
2883 /* Align partition start to erase blocks for factory images only */
2885 file_system_partition
->base
= ALIGN(firmware_partition
->base
+ kernel
.st_size
, 0x10000);
2887 file_system_partition
->size
= firmware_partition
->size
- file_system_partition
->base
;
2889 os_image_partition
->name
= "os-image";
2890 os_image_partition
->size
= kernel
.st_size
;
2893 parts
[0] = make_partition_table(info
->partitions
);
2894 parts
[1] = make_soft_version(info
, rev
);
2895 parts
[2] = make_support_list(info
);
2896 parts
[3] = read_file("os-image", kernel_image
, false, NULL
);
2897 parts
[4] = read_file("file-system", rootfs_image
, add_jffs2_eof
, file_system_partition
);
2899 /* Some devices need the extra-para partition to accept the firmware */
2900 if (strcasecmp(info
->id
, "ARCHER-A6-V3") == 0 ||
2901 strcasecmp(info
->id
, "ARCHER-A7-V5") == 0 ||
2902 strcasecmp(info
->id
, "ARCHER-C2-V3") == 0 ||
2903 strcasecmp(info
->id
, "ARCHER-C7-V4") == 0 ||
2904 strcasecmp(info
->id
, "ARCHER-C7-V5") == 0 ||
2905 strcasecmp(info
->id
, "ARCHER-C25-V1") == 0 ||
2906 strcasecmp(info
->id
, "ARCHER-C59-V2") == 0 ||
2907 strcasecmp(info
->id
, "ARCHER-C60-V2") == 0 ||
2908 strcasecmp(info
->id
, "ARCHER-C60-V3") == 0 ||
2909 strcasecmp(info
->id
, "ARCHER-C6U-V1") == 0 ||
2910 strcasecmp(info
->id
, "TLWR1043NV5") == 0) {
2911 const uint8_t extra_para
[2] = {0x01, 0x00};
2912 parts
[5] = make_extra_para(info
, extra_para
,
2913 sizeof(extra_para
));
2914 } else if (strcasecmp(info
->id
, "ARCHER-C6-V2") == 0) {
2915 const uint8_t extra_para
[2] = {0x00, 0x01};
2916 parts
[5] = make_extra_para(info
, extra_para
,
2917 sizeof(extra_para
));
2918 } else if (strcasecmp(info
->id
, "ARCHER-C6-V2-US") == 0 ||
2919 strcasecmp(info
->id
, "EAP245-V3") == 0) {
2920 const uint8_t extra_para
[2] = {0x01, 0x01};
2921 parts
[5] = make_extra_para(info
, extra_para
,
2922 sizeof(extra_para
));
2928 image
= generate_sysupgrade_image(info
, parts
, &len
);
2930 image
= generate_factory_image(info
, parts
, &len
);
2932 FILE *file
= fopen(output
, "wb");
2934 error(1, errno
, "unable to open output file");
2936 if (fwrite(image
, len
, 1, file
) != 1)
2937 error(1, 0, "unable to write output file");
2943 for (i
= 0; parts
[i
].name
; i
++)
2944 free_image_partition(parts
[i
]);
2948 static void usage(const char *argv0
) {
2950 "Usage: %s [OPTIONS...]\n"
2953 " -h show this help\n"
2955 "Info about an image:\n"
2956 " -i <file> input file to read from\n"
2957 "Create a new image:\n"
2958 " -B <board> create image for the board specified with <board>\n"
2959 " -k <file> read kernel image from the file <file>\n"
2960 " -r <file> read rootfs image from the file <file>\n"
2961 " -o <file> write output to the file <file>\n"
2962 " -V <rev> sets the revision number to <rev>\n"
2963 " -j add jffs2 end-of-filesystem markers\n"
2964 " -S create sysupgrade instead of factory image\n"
2965 "Extract an old image:\n"
2966 " -x <file> extract all oem firmware partition\n"
2967 " -d <dir> destination to extract the firmware partition\n"
2968 " -z <file> convert an oem firmware into a sysupgade file. Use -o for output file\n",
2974 static struct device_info
*find_board(const char *id
)
2976 struct device_info
*board
= NULL
;
2978 for (board
= boards
; board
->id
!= NULL
; board
++)
2979 if (strcasecmp(id
, board
->id
) == 0)
2985 static int add_flash_partition(
2986 struct flash_partition_entry
*part_list
,
2993 /* check if the list has a free entry */
2994 for (ptr
= 0; ptr
< max_entries
; ptr
++, part_list
++) {
2995 if (part_list
->name
== NULL
&&
2996 part_list
->base
== 0 &&
2997 part_list
->size
== 0)
3001 if (ptr
== max_entries
) {
3002 error(1, 0, "No free flash part entry available.");
3005 part_list
->name
= calloc(1, strlen(name
) + 1);
3006 if (!part_list
->name
) {
3007 error(1, 0, "Unable to allocate memory");
3010 memcpy((char *)part_list
->name
, name
, strlen(name
));
3011 part_list
->base
= base
;
3012 part_list
->size
= size
;
3017 /** read the partition table into struct flash_partition_entry */
3018 static int read_partition_table(
3019 FILE *file
, long offset
,
3020 struct flash_partition_entry
*entries
, size_t max_entries
,
3025 const char *parthdr
= NULL
;
3026 const char *fwuphdr
= "fwup-ptn";
3027 const char *flashhdr
= "partition";
3029 /* TODO: search for the partition table */
3039 error(1, 0, "Invalid partition table");
3042 if (fseek(file
, offset
, SEEK_SET
) < 0)
3043 error(1, errno
, "Can not seek in the firmware");
3045 if (fread(buf
, 2048, 1, file
) != 1)
3046 error(1, errno
, "Can not read fwup-ptn from the firmware");
3050 /* look for the partition header */
3051 if (memcmp(buf
, parthdr
, strlen(parthdr
)) != 0) {
3052 fprintf(stderr
, "DEBUG: can not find fwuphdr\n");
3057 end
= buf
+ sizeof(buf
);
3058 while ((ptr
+ strlen(parthdr
)) < end
&&
3059 memcmp(ptr
, parthdr
, strlen(parthdr
)) == 0) {
3063 char name
[32] = { 0 };
3065 unsigned long base
= 0;
3066 unsigned long size
= 0;
3068 end_part
= memchr(ptr
, '\n', (end
- ptr
));
3069 if (end_part
== NULL
) {
3070 /* in theory this should never happen, because a partition always ends with 0x09, 0x0D, 0x0A */
3074 for (int i
= 0; i
<= 4; i
++) {
3075 if (end_part
<= ptr
)
3078 end_element
= memchr(ptr
, 0x20, (end_part
- ptr
));
3079 if (end_element
== NULL
) {
3080 error(1, errno
, "Ignoring the rest of the partition entries.");
3085 /* partition header */
3087 ptr
= end_element
+ 1;
3091 name_len
= (end_element
- ptr
) > 31 ? 31 : (end_element
- ptr
);
3092 strncpy(name
, ptr
, name_len
);
3093 name
[name_len
] = '\0';
3094 ptr
= end_element
+ 1;
3099 ptr
= end_element
+ 1;
3104 base
= strtoul(ptr
, NULL
, 16);
3105 ptr
= end_element
+ 1;
3110 ptr
= end_element
+ 1;
3111 /* actual size. The last element doesn't have a sepeartor */
3112 size
= strtoul(ptr
, NULL
, 16);
3113 /* the part ends with 0x09, 0x0d, 0x0a */
3115 add_flash_partition(entries
, max_entries
, name
, base
, size
);
3124 static void write_partition(
3126 size_t firmware_offset
,
3127 struct flash_partition_entry
*entry
,
3133 fseek(input_file
, entry
->base
+ firmware_offset
, SEEK_SET
);
3135 for (offset
= 0; sizeof(buf
) + offset
<= entry
->size
; offset
+= sizeof(buf
)) {
3136 if (fread(buf
, sizeof(buf
), 1, input_file
) != 1)
3137 error(1, errno
, "Can not read partition from input_file");
3139 if (fwrite(buf
, sizeof(buf
), 1, output_file
) != 1)
3140 error(1, errno
, "Can not write partition to output_file");
3142 /* write last chunk smaller than buffer */
3143 if (offset
< entry
->size
) {
3144 offset
= entry
->size
- offset
;
3145 if (fread(buf
, offset
, 1, input_file
) != 1)
3146 error(1, errno
, "Can not read partition from input_file");
3147 if (fwrite(buf
, offset
, 1, output_file
) != 1)
3148 error(1, errno
, "Can not write partition to output_file");
3152 static int extract_firmware_partition(FILE *input_file
, size_t firmware_offset
, struct flash_partition_entry
*entry
, const char *output_directory
)
3155 char output
[PATH_MAX
];
3157 snprintf(output
, PATH_MAX
, "%s/%s", output_directory
, entry
->name
);
3158 output_file
= fopen(output
, "wb+");
3159 if (output_file
== NULL
) {
3160 error(1, errno
, "Can not open output file %s", output
);
3163 write_partition(input_file
, firmware_offset
, entry
, output_file
);
3165 fclose(output_file
);
3170 /** extract all partitions from the firmware file */
3171 static int extract_firmware(const char *input
, const char *output_directory
)
3173 struct flash_partition_entry entries
[16] = { 0 };
3174 size_t max_entries
= 16;
3175 size_t firmware_offset
= 0x1014;
3178 struct stat statbuf
;
3180 /* check input file */
3181 if (stat(input
, &statbuf
)) {
3182 error(1, errno
, "Can not read input firmware %s", input
);
3185 /* check if output directory exists */
3186 if (stat(output_directory
, &statbuf
)) {
3187 error(1, errno
, "Failed to stat output directory %s", output_directory
);
3190 if ((statbuf
.st_mode
& S_IFMT
) != S_IFDIR
) {
3191 error(1, errno
, "Given output directory is not a directory %s", output_directory
);
3194 input_file
= fopen(input
, "rb");
3196 if (read_partition_table(input_file
, firmware_offset
, entries
, 16, 0) != 0) {
3197 error(1, 0, "Error can not read the partition table (fwup-ptn)");
3200 for (size_t i
= 0; i
< max_entries
; i
++) {
3201 if (entries
[i
].name
== NULL
&&
3202 entries
[i
].base
== 0 &&
3203 entries
[i
].size
== 0)
3206 extract_firmware_partition(input_file
, firmware_offset
, &entries
[i
], output_directory
);
3212 static struct flash_partition_entry
*find_partition(
3213 struct flash_partition_entry
*entries
, size_t max_entries
,
3214 const char *name
, const char *error_msg
)
3216 for (size_t i
= 0; i
< max_entries
; i
++, entries
++) {
3217 if (strcmp(entries
->name
, name
) == 0)
3222 error(1, 0, "%s", error_msg
);
3228 static int firmware_info(const char *input
)
3230 struct flash_partition_entry pointers
[MAX_PARTITIONS
] = { };
3231 struct flash_partition_entry
*e
;
3235 fp
= fopen(input
, "r");
3237 if (read_partition_table(fp
, 0x1014, pointers
, MAX_PARTITIONS
, 0)) {
3238 error(1, 0, "Error can not read the partition table (fwup-ptn)");
3241 printf("Firmware image partitions:\n");
3242 printf("%-8s %-8s %s\n", "base", "size", "name");
3243 for (i
= 0; i
< MAX_PARTITIONS
; i
++) {
3246 if (!e
->name
&& !e
->base
&& !e
->size
)
3249 printf("%08x %08x %s\n", e
->base
, e
->size
, e
->name
? e
->name
: "");
3252 e
= find_partition(pointers
, MAX_PARTITIONS
, "soft-version", NULL
);
3254 size_t data_len
= e
->size
- sizeof(struct meta_header
);
3255 char *buf
= malloc(data_len
);
3256 struct soft_version
*s
;
3261 error(1, errno
, "Failed to alloc buffer");
3263 if (fseek(fp
, 0x1014 + e
->base
+ sizeof(struct meta_header
), SEEK_SET
))
3264 error(1, errno
, "Can not seek in the firmware");
3266 if (fread(buf
, data_len
, 1, fp
) != 1)
3267 error(1, errno
, "Can not read fwup-ptn data from the firmware");
3269 /* Check for string ignoring padding character */
3271 for (i
= 0; i
< data_len
- 1; i
++) {
3272 if (!isascii(buf
[i
])) {
3278 printf("\n[Software version]\n");
3280 fwrite(buf
, data_len
, 1, stdout
);
3282 } else if (data_len
>= offsetof(struct soft_version
, rev
)) {
3283 s
= (struct soft_version
*)buf
;
3285 printf("Version: %d.%d.%d\n", s
->version_major
, s
->version_minor
, s
->version_patch
);
3286 printf("Date: %02x%02x-%02x-%02x\n", s
->year_hi
, s
->year_lo
, s
->month
, s
->day
);
3288 printf("Failed to parse data\n");
3294 e
= find_partition(pointers
, MAX_PARTITIONS
, "support-list", NULL
);
3300 if (fseek(fp
, 0x1014 + e
->base
+ sizeof(struct meta_header
), SEEK_SET
))
3301 error(1, errno
, "Can not seek in the firmware");
3303 printf("\n[Support list]\n");
3304 for (length
= e
->size
- sizeof(struct meta_header
); length
; length
-= bytes
) {
3305 bytes
= fread(buf
, 1, length
> sizeof(buf
) ? sizeof(buf
) : length
, fp
);
3307 error(1, errno
, "Can not read fwup-ptn data from the firmware");
3313 e
= find_partition(pointers
, MAX_PARTITIONS
, "partition-table", NULL
);
3315 struct flash_partition_entry parts
[MAX_PARTITIONS
] = { };
3317 if (read_partition_table(fp
, 0x1014 + e
->base
+ 4, parts
, MAX_PARTITIONS
, 1)) {
3318 error(1, 0, "Error can not read the partition table (partition)");
3321 printf("\n[Partition table]\n");
3322 printf("%-8s %-8s %s\n", "base", "size", "name");
3323 for (i
= 0; i
< MAX_PARTITIONS
; i
++) {
3326 if (!e
->name
&& !e
->base
&& !e
->size
)
3329 printf("%08x %08x %s\n", e
->base
, e
->size
, e
->name
? e
->name
: "");
3338 static void write_ff(FILE *output_file
, size_t size
)
3343 memset(buf
, 0xff, sizeof(buf
));
3345 for (offset
= 0; offset
+ sizeof(buf
) < size
; offset
+= sizeof(buf
)) {
3346 if (fwrite(buf
, sizeof(buf
), 1, output_file
) != 1)
3347 error(1, errno
, "Can not write 0xff to output_file");
3350 /* write last chunk smaller than buffer */
3351 if (offset
< size
) {
3352 offset
= size
- offset
;
3353 if (fwrite(buf
, offset
, 1, output_file
) != 1)
3354 error(1, errno
, "Can not write partition to output_file");
3358 static void convert_firmware(const char *input
, const char *output
)
3360 struct flash_partition_entry fwup
[MAX_PARTITIONS
] = { 0 };
3361 struct flash_partition_entry flash
[MAX_PARTITIONS
] = { 0 };
3362 struct flash_partition_entry
*fwup_os_image
= NULL
, *fwup_file_system
= NULL
;
3363 struct flash_partition_entry
*flash_os_image
= NULL
, *flash_file_system
= NULL
;
3364 struct flash_partition_entry
*fwup_partition_table
= NULL
;
3365 size_t firmware_offset
= 0x1014;
3366 FILE *input_file
, *output_file
;
3368 struct stat statbuf
;
3370 /* check input file */
3371 if (stat(input
, &statbuf
)) {
3372 error(1, errno
, "Can not read input firmware %s", input
);
3375 input_file
= fopen(input
, "rb");
3377 error(1, 0, "Can not open input firmware %s", input
);
3379 output_file
= fopen(output
, "wb");
3381 error(1, 0, "Can not open output firmware %s", output
);
3383 if (read_partition_table(input_file
, firmware_offset
, fwup
, MAX_PARTITIONS
, 0) != 0) {
3384 error(1, 0, "Error can not read the partition table (fwup-ptn)");
3387 fwup_os_image
= find_partition(fwup
, MAX_PARTITIONS
,
3388 "os-image", "Error can not find os-image partition (fwup)");
3389 fwup_file_system
= find_partition(fwup
, MAX_PARTITIONS
,
3390 "file-system", "Error can not find file-system partition (fwup)");
3391 fwup_partition_table
= find_partition(fwup
, MAX_PARTITIONS
,
3392 "partition-table", "Error can not find partition-table partition");
3394 /* the flash partition table has a 0x00000004 magic haeder */
3395 if (read_partition_table(input_file
, firmware_offset
+ fwup_partition_table
->base
+ 4, flash
, MAX_PARTITIONS
, 1) != 0)
3396 error(1, 0, "Error can not read the partition table (flash)");
3398 flash_os_image
= find_partition(flash
, MAX_PARTITIONS
,
3399 "os-image", "Error can not find os-image partition (flash)");
3400 flash_file_system
= find_partition(flash
, MAX_PARTITIONS
,
3401 "file-system", "Error can not find file-system partition (flash)");
3403 /* write os_image to 0x0 */
3404 write_partition(input_file
, firmware_offset
, fwup_os_image
, output_file
);
3405 write_ff(output_file
, flash_os_image
->size
- fwup_os_image
->size
);
3407 /* write file-system behind os_image */
3408 fseek(output_file
, flash_file_system
->base
- flash_os_image
->base
, SEEK_SET
);
3409 write_partition(input_file
, firmware_offset
, fwup_file_system
, output_file
);
3410 write_ff(output_file
, flash_file_system
->size
- fwup_file_system
->size
);
3412 fclose(output_file
);
3416 int main(int argc
, char *argv
[]) {
3417 const char *info_image
= NULL
, *board
= NULL
, *kernel_image
= NULL
, *rootfs_image
= NULL
, *output
= NULL
;
3418 const char *extract_image
= NULL
, *output_directory
= NULL
, *convert_image
= NULL
;
3419 bool add_jffs2_eof
= false, sysupgrade
= false;
3421 struct device_info
*info
;
3422 set_source_date_epoch();
3427 c
= getopt(argc
, argv
, "i:B:k:r:o:V:jSh:x:d:z:");
3433 info_image
= optarg
;
3441 kernel_image
= optarg
;
3445 rootfs_image
= optarg
;
3453 sscanf(optarg
, "r%u", &rev
);
3457 add_jffs2_eof
= true;
3469 output_directory
= optarg
;
3473 extract_image
= optarg
;
3477 convert_image
= optarg
;
3487 firmware_info(info_image
);
3488 } else if (extract_image
|| output_directory
) {
3490 error(1, 0, "No factory/oem image given via -x <file>. Output directory is only valid with -x");
3491 if (!output_directory
)
3492 error(1, 0, "Can not extract an image without output directory. Use -d <dir>");
3493 extract_firmware(extract_image
, output_directory
);
3494 } else if (convert_image
) {
3496 error(1, 0, "Can not convert a factory/oem image into sysupgrade image without output file. Use -o <file>");
3497 convert_firmware(convert_image
, output
);
3500 error(1, 0, "no board has been specified");
3502 error(1, 0, "no kernel image has been specified");
3504 error(1, 0, "no rootfs image has been specified");
3506 error(1, 0, "no output filename has been specified");
3508 info
= find_board(board
);
3511 error(1, 0, "unsupported board %s", board
);
3513 build_image(output
, kernel_image
, rootfs_image
, rev
, add_jffs2_eof
, sysupgrade
, info
);