2 Copyright (c) 2014, Matthias Schiffer <mschiffer@universe-factory.net>
5 Redistribution and use in source and binary forms, with or without
6 modification, are permitted provided that the following conditions are met:
8 1. Redistributions of source code must retain the above copyright notice,
9 this list of conditions and the following disclaimer.
10 2. Redistributions in binary form must reproduce the above copyright notice,
11 this list of conditions and the following disclaimer in the documentation
12 and/or other materials provided with the distribution.
14 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
15 AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16 IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
17 DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
18 FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19 DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
20 SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
21 CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
22 OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
23 OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
30 Image generation tool for the TP-LINK SafeLoader as seen on
31 TP-LINK Pharos devices (CPE210/220/510/520)
45 #include <arpa/inet.h>
47 #include <sys/types.h>
53 #define ALIGN(x,a) ({ typeof(a) __a = (a); (((x) + __a - 1) & ~(__a - 1)); })
56 #define MAX_PARTITIONS 32
58 /** An image partition table entry */
59 struct image_partition_entry
{
65 /** A flash partition table entry */
66 struct flash_partition_entry
{
72 /** Firmware layout description */
76 const char *support_list
;
79 const struct flash_partition_entry partitions
[MAX_PARTITIONS
+1];
80 const char *first_sysupgrade_partition
;
81 const char *last_sysupgrade_partition
;
84 /** The content of the soft-version structure */
85 struct __attribute__((__packed__
)) soft_version
{
89 uint8_t version_major
;
90 uint8_t version_minor
;
91 uint8_t version_patch
;
101 static const uint8_t jffs2_eof_mark
[4] = {0xde, 0xad, 0xc0, 0xde};
105 Salt for the MD5 hash
107 Fortunately, TP-LINK seems to use the same salt for most devices which use
108 the new image format.
110 static const uint8_t md5_salt
[16] = {
111 0x7a, 0x2b, 0x15, 0xed,
112 0x9b, 0x98, 0x59, 0x6d,
113 0xe5, 0x04, 0xab, 0x44,
114 0xac, 0x2a, 0x9f, 0x4e,
118 /** Firmware layout table */
119 static struct device_info boards
[] = {
120 /** Firmware layout for the CPE210/220 */
123 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
126 "CPE210(TP-LINK|UN|N300-2):1.0\r\n"
127 "CPE210(TP-LINK|UN|N300-2):1.1\r\n"
128 "CPE210(TP-LINK|US|N300-2):1.1\r\n"
129 "CPE210(TP-LINK|EU|N300-2):1.1\r\n"
130 "CPE220(TP-LINK|UN|N300-2):1.1\r\n"
131 "CPE220(TP-LINK|US|N300-2):1.1\r\n"
132 "CPE220(TP-LINK|EU|N300-2):1.1\r\n",
133 .support_trail
= '\xff',
137 {"fs-uboot", 0x00000, 0x20000},
138 {"partition-table", 0x20000, 0x02000},
139 {"default-mac", 0x30000, 0x00020},
140 {"product-info", 0x31100, 0x00100},
141 {"signature", 0x32000, 0x00400},
142 {"os-image", 0x40000, 0x170000},
143 {"soft-version", 0x1b0000, 0x00100},
144 {"support-list", 0x1b1000, 0x00400},
145 {"file-system", 0x1c0000, 0x600000},
146 {"user-config", 0x7c0000, 0x10000},
147 {"default-config", 0x7d0000, 0x10000},
148 {"log", 0x7e0000, 0x10000},
149 {"radio", 0x7f0000, 0x10000},
153 .first_sysupgrade_partition
= "os-image",
154 .last_sysupgrade_partition
= "file-system",
157 /** Firmware layout for the CPE510/520 */
160 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
163 "CPE510(TP-LINK|UN|N300-5):1.0\r\n"
164 "CPE510(TP-LINK|UN|N300-5):1.1\r\n"
165 "CPE510(TP-LINK|UN|N300-5):1.1\r\n"
166 "CPE510(TP-LINK|US|N300-5):1.1\r\n"
167 "CPE510(TP-LINK|EU|N300-5):1.1\r\n"
168 "CPE520(TP-LINK|UN|N300-5):1.1\r\n"
169 "CPE520(TP-LINK|US|N300-5):1.1\r\n"
170 "CPE520(TP-LINK|EU|N300-5):1.1\r\n",
171 .support_trail
= '\xff',
175 {"fs-uboot", 0x00000, 0x20000},
176 {"partition-table", 0x20000, 0x02000},
177 {"default-mac", 0x30000, 0x00020},
178 {"product-info", 0x31100, 0x00100},
179 {"signature", 0x32000, 0x00400},
180 {"os-image", 0x40000, 0x170000},
181 {"soft-version", 0x1b0000, 0x00100},
182 {"support-list", 0x1b1000, 0x00400},
183 {"file-system", 0x1c0000, 0x600000},
184 {"user-config", 0x7c0000, 0x10000},
185 {"default-config", 0x7d0000, 0x10000},
186 {"log", 0x7e0000, 0x10000},
187 {"radio", 0x7f0000, 0x10000},
191 .first_sysupgrade_partition
= "os-image",
192 .last_sysupgrade_partition
= "file-system",
197 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
200 "WBS210(TP-LINK|UN|N300-2):1.20\r\n"
201 "WBS210(TP-LINK|US|N300-2):1.20\r\n"
202 "WBS210(TP-LINK|EU|N300-2):1.20\r\n",
203 .support_trail
= '\xff',
207 {"fs-uboot", 0x00000, 0x20000},
208 {"partition-table", 0x20000, 0x02000},
209 {"default-mac", 0x30000, 0x00020},
210 {"product-info", 0x31100, 0x00100},
211 {"signature", 0x32000, 0x00400},
212 {"os-image", 0x40000, 0x170000},
213 {"soft-version", 0x1b0000, 0x00100},
214 {"support-list", 0x1b1000, 0x00400},
215 {"file-system", 0x1c0000, 0x600000},
216 {"user-config", 0x7c0000, 0x10000},
217 {"default-config", 0x7d0000, 0x10000},
218 {"log", 0x7e0000, 0x10000},
219 {"radio", 0x7f0000, 0x10000},
223 .first_sysupgrade_partition
= "os-image",
224 .last_sysupgrade_partition
= "file-system",
229 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
232 "WBS510(TP-LINK|UN|N300-5):1.20\r\n"
233 "WBS510(TP-LINK|US|N300-5):1.20\r\n"
234 "WBS510(TP-LINK|EU|N300-5):1.20\r\n",
235 .support_trail
= '\xff',
239 {"fs-uboot", 0x00000, 0x20000},
240 {"partition-table", 0x20000, 0x02000},
241 {"default-mac", 0x30000, 0x00020},
242 {"product-info", 0x31100, 0x00100},
243 {"signature", 0x32000, 0x00400},
244 {"os-image", 0x40000, 0x170000},
245 {"soft-version", 0x1b0000, 0x00100},
246 {"support-list", 0x1b1000, 0x00400},
247 {"file-system", 0x1c0000, 0x600000},
248 {"user-config", 0x7c0000, 0x10000},
249 {"default-config", 0x7d0000, 0x10000},
250 {"log", 0x7e0000, 0x10000},
251 {"radio", 0x7f0000, 0x10000},
255 .first_sysupgrade_partition
= "os-image",
256 .last_sysupgrade_partition
= "file-system",
259 /** Firmware layout for the C2600 */
265 "{product_name:Archer C2600,product_ver:1.0.0,special_id:00000000}\r\n",
266 .support_trail
= '\x00',
270 {"SBL1", 0x00000, 0x20000},
271 {"MIBIB", 0x20000, 0x20000},
272 {"SBL2", 0x40000, 0x20000},
273 {"SBL3", 0x60000, 0x30000},
274 {"DDRCONFIG", 0x90000, 0x10000},
275 {"SSD", 0xa0000, 0x10000},
276 {"TZ", 0xb0000, 0x30000},
277 {"RPM", 0xe0000, 0x20000},
278 {"fs-uboot", 0x100000, 0x70000},
279 {"uboot-env", 0x170000, 0x40000},
280 {"radio", 0x1b0000, 0x40000},
281 {"os-image", 0x1f0000, 0x200000},
282 {"file-system", 0x3f0000, 0x1b00000},
283 {"default-mac", 0x1ef0000, 0x00200},
284 {"pin", 0x1ef0200, 0x00200},
285 {"product-info", 0x1ef0400, 0x0fc00},
286 {"partition-table", 0x1f00000, 0x10000},
287 {"soft-version", 0x1f10000, 0x10000},
288 {"support-list", 0x1f20000, 0x10000},
289 {"profile", 0x1f30000, 0x10000},
290 {"default-config", 0x1f40000, 0x10000},
291 {"user-config", 0x1f50000, 0x40000},
292 {"qos-db", 0x1f90000, 0x40000},
293 {"usb-config", 0x1fd0000, 0x10000},
294 {"log", 0x1fe0000, 0x20000},
298 .first_sysupgrade_partition
= "os-image",
299 .last_sysupgrade_partition
= "file-system"
302 /** Firmware layout for the C25v1 */
304 .id
= "ARCHER-C25-V1",
307 "{product_name:ArcherC25,product_ver:1.0.0,special_id:00000000}\n"
308 "{product_name:ArcherC25,product_ver:1.0.0,special_id:55530000}\n"
309 "{product_name:ArcherC25,product_ver:1.0.0,special_id:45550000}\n",
310 .support_trail
= '\x00',
311 .soft_ver
= "soft_ver:1.0.0\n",
314 We use a bigger os-image partition than the stock images (and thus
315 smaller file-system), as our kernel doesn't fit in the stock firmware's
319 {"factory-boot", 0x00000, 0x20000},
320 {"fs-uboot", 0x20000, 0x10000},
321 {"os-image", 0x30000, 0x180000}, /* Stock: base 0x30000 size 0x100000 */
322 {"file-system", 0x1b0000, 0x620000}, /* Stock: base 0x130000 size 0x6a0000 */
323 {"user-config", 0x7d0000, 0x04000},
324 {"default-mac", 0x7e0000, 0x00100},
325 {"device-id", 0x7e0100, 0x00100},
326 {"extra-para", 0x7e0200, 0x00100},
327 {"pin", 0x7e0300, 0x00100},
328 {"support-list", 0x7e0400, 0x00400},
329 {"soft-version", 0x7e0800, 0x00400},
330 {"product-info", 0x7e0c00, 0x01400},
331 {"partition-table", 0x7e2000, 0x01000},
332 {"profile", 0x7e3000, 0x01000},
333 {"default-config", 0x7e4000, 0x04000},
334 {"merge-config", 0x7ec000, 0x02000},
335 {"qos-db", 0x7ee000, 0x02000},
336 {"radio", 0x7f0000, 0x10000},
340 .first_sysupgrade_partition
= "os-image",
341 .last_sysupgrade_partition
= "file-system",
344 /** Firmware layout for the C58v1 */
346 .id
= "ARCHER-C58-V1",
350 "{product_name:Archer C58,product_ver:1.0.0,special_id:00000000}\r\n"
351 "{product_name:Archer C58,product_ver:1.0.0,special_id:45550000}\r\n"
352 "{product_name:Archer C58,product_ver:1.0.0,special_id:55530000}\r\n",
353 .support_trail
= '\x00',
354 .soft_ver
= "soft_ver:1.0.0\n",
357 {"fs-uboot", 0x00000, 0x10000},
358 {"default-mac", 0x10000, 0x00200},
359 {"pin", 0x10200, 0x00200},
360 {"product-info", 0x10400, 0x00100},
361 {"partition-table", 0x10500, 0x00800},
362 {"soft-version", 0x11300, 0x00200},
363 {"support-list", 0x11500, 0x00100},
364 {"device-id", 0x11600, 0x00100},
365 {"profile", 0x11700, 0x03900},
366 {"default-config", 0x15000, 0x04000},
367 {"user-config", 0x19000, 0x04000},
368 {"os-image", 0x20000, 0x180000},
369 {"file-system", 0x1a0000, 0x648000},
370 {"certyficate", 0x7e8000, 0x08000},
371 {"radio", 0x7f0000, 0x10000},
375 .first_sysupgrade_partition
= "os-image",
376 .last_sysupgrade_partition
= "file-system",
379 /** Firmware layout for the C59v1 */
381 .id
= "ARCHER-C59-V1",
385 "{product_name:Archer C59,product_ver:1.0.0,special_id:00000000}\r\n"
386 "{product_name:Archer C59,product_ver:1.0.0,special_id:45550000}\r\n"
387 "{product_name:Archer C59,product_ver:1.0.0,special_id:52550000}\r\n"
388 "{product_name:Archer C59,product_ver:1.0.0,special_id:55530000}\r\n",
389 .support_trail
= '\x00',
390 .soft_ver
= "soft_ver:1.0.0\n",
393 {"fs-uboot", 0x00000, 0x10000},
394 {"default-mac", 0x10000, 0x00200},
395 {"pin", 0x10200, 0x00200},
396 {"device-id", 0x10400, 0x00100},
397 {"product-info", 0x10500, 0x0fb00},
398 {"os-image", 0x20000, 0x180000},
399 {"file-system", 0x1a0000, 0xcb0000},
400 {"partition-table", 0xe50000, 0x10000},
401 {"soft-version", 0xe60000, 0x10000},
402 {"support-list", 0xe70000, 0x10000},
403 {"profile", 0xe80000, 0x10000},
404 {"default-config", 0xe90000, 0x10000},
405 {"user-config", 0xea0000, 0x40000},
406 {"usb-config", 0xee0000, 0x10000},
407 {"certificate", 0xef0000, 0x10000},
408 {"qos-db", 0xf00000, 0x40000},
409 {"log", 0xfe0000, 0x10000},
410 {"radio", 0xff0000, 0x10000},
414 .first_sysupgrade_partition
= "os-image",
415 .last_sysupgrade_partition
= "file-system",
418 /** Firmware layout for the C60v1 */
420 .id
= "ARCHER-C60-V1",
424 "{product_name:Archer C60,product_ver:1.0.0,special_id:00000000}\r\n"
425 "{product_name:Archer C60,product_ver:1.0.0,special_id:45550000}\r\n"
426 "{product_name:Archer C60,product_ver:1.0.0,special_id:55530000}\r\n",
427 .support_trail
= '\x00',
428 .soft_ver
= "soft_ver:1.0.0\n",
431 {"fs-uboot", 0x00000, 0x10000},
432 {"default-mac", 0x10000, 0x00200},
433 {"pin", 0x10200, 0x00200},
434 {"product-info", 0x10400, 0x00100},
435 {"partition-table", 0x10500, 0x00800},
436 {"soft-version", 0x11300, 0x00200},
437 {"support-list", 0x11500, 0x00100},
438 {"device-id", 0x11600, 0x00100},
439 {"profile", 0x11700, 0x03900},
440 {"default-config", 0x15000, 0x04000},
441 {"user-config", 0x19000, 0x04000},
442 {"os-image", 0x20000, 0x180000},
443 {"file-system", 0x1a0000, 0x648000},
444 {"certyficate", 0x7e8000, 0x08000},
445 {"radio", 0x7f0000, 0x10000},
449 .first_sysupgrade_partition
= "os-image",
450 .last_sysupgrade_partition
= "file-system",
453 /** Firmware layout for the C5 */
455 .id
= "ARCHER-C5-V2",
459 "{product_name:ArcherC5,product_ver:2.0.0,special_id:00000000}\r\n"
460 "{product_name:ArcherC5,product_ver:2.0.0,special_id:55530000}\r\n"
461 "{product_name:ArcherC5,product_ver:2.0.0,special_id:4A500000}\r\n", /* JP version */
462 .support_trail
= '\x00',
466 {"fs-uboot", 0x00000, 0x40000},
467 {"os-image", 0x40000, 0x200000},
468 {"file-system", 0x240000, 0xc00000},
469 {"default-mac", 0xe40000, 0x00200},
470 {"pin", 0xe40200, 0x00200},
471 {"product-info", 0xe40400, 0x00200},
472 {"partition-table", 0xe50000, 0x10000},
473 {"soft-version", 0xe60000, 0x00200},
474 {"support-list", 0xe61000, 0x0f000},
475 {"profile", 0xe70000, 0x10000},
476 {"default-config", 0xe80000, 0x10000},
477 {"user-config", 0xe90000, 0x50000},
478 {"log", 0xee0000, 0x100000},
479 {"radio_bk", 0xfe0000, 0x10000},
480 {"radio", 0xff0000, 0x10000},
484 .first_sysupgrade_partition
= "os-image",
485 .last_sysupgrade_partition
= "file-system"
488 /** Firmware layout for the C7 */
490 .id
= "ARCHER-C7-V4",
493 "{product_name:Archer C7,product_ver:4.0.0,special_id:00000000}\n"
494 "{product_name:Archer C7,product_ver:4.0.0,special_id:41550000}\n"
495 "{product_name:Archer C7,product_ver:4.0.0,special_id:45550000}\n"
496 "{product_name:Archer C7,product_ver:4.0.0,special_id:4B520000}\n"
497 "{product_name:Archer C7,product_ver:4.0.0,special_id:42520000}\n"
498 "{product_name:Archer C7,product_ver:4.0.0,special_id:4A500000}\n"
499 "{product_name:Archer C7,product_ver:4.0.0,special_id:52550000}\n"
500 "{product_name:Archer C7,product_ver:4.0.0,special_id:54570000}\n"
501 "{product_name:Archer C7,product_ver:4.0.0,special_id:55530000}\n"
502 "{product_name:Archer C7,product_ver:4.0.0,special_id:43410000}\n",
503 .support_trail
= '\x00',
504 .soft_ver
= "soft_ver:1.0.0\n",
507 We use a bigger os-image partition than the stock images (and thus
508 smaller file-system), as our kernel doesn't fit in the stock firmware's
512 {"factory-boot", 0x00000, 0x20000},
513 {"fs-uboot", 0x20000, 0x20000},
514 {"os-image", 0x40000, 0x180000}, /* Stock: base 0x40000 size 0x120000 */
515 {"file-system", 0x1c0000, 0xd40000}, /* Stock: base 0x160000 size 0xda0000 */
516 {"default-mac", 0xf00000, 0x00200},
517 {"pin", 0xf00200, 0x00200},
518 {"device-id", 0xf00400, 0x00100},
519 {"product-info", 0xf00500, 0x0fb00},
520 {"soft-version", 0xf10000, 0x00100},
521 {"extra-para", 0xf11000, 0x01000},
522 {"support-list", 0xf12000, 0x0a000},
523 {"profile", 0xf1c000, 0x04000},
524 {"default-config", 0xf20000, 0x10000},
525 {"user-config", 0xf30000, 0x40000},
526 {"qos-db", 0xf70000, 0x40000},
527 {"certificate", 0xfb0000, 0x10000},
528 {"partition-table", 0xfc0000, 0x10000},
529 {"log", 0xfd0000, 0x20000},
530 {"radio", 0xff0000, 0x10000},
534 .first_sysupgrade_partition
= "os-image",
535 .last_sysupgrade_partition
= "file-system",
538 /** Firmware layout for the C9 */
544 "{product_name:ArcherC9,"
546 "special_id:00000000}\n",
547 .support_trail
= '\x00',
551 {"fs-uboot", 0x00000, 0x40000},
552 {"os-image", 0x40000, 0x200000},
553 {"file-system", 0x240000, 0xc00000},
554 {"default-mac", 0xe40000, 0x00200},
555 {"pin", 0xe40200, 0x00200},
556 {"product-info", 0xe40400, 0x00200},
557 {"partition-table", 0xe50000, 0x10000},
558 {"soft-version", 0xe60000, 0x00200},
559 {"support-list", 0xe61000, 0x0f000},
560 {"profile", 0xe70000, 0x10000},
561 {"default-config", 0xe80000, 0x10000},
562 {"user-config", 0xe90000, 0x50000},
563 {"log", 0xee0000, 0x100000},
564 {"radio_bk", 0xfe0000, 0x10000},
565 {"radio", 0xff0000, 0x10000},
569 .first_sysupgrade_partition
= "os-image",
570 .last_sysupgrade_partition
= "file-system"
573 /** Firmware layout for the EAP120 */
576 .vendor
= "EAP120(TP-LINK|UN|N300-2):1.0\r\n",
579 "EAP120(TP-LINK|UN|N300-2):1.0\r\n",
580 .support_trail
= '\xff',
584 {"fs-uboot", 0x00000, 0x20000},
585 {"partition-table", 0x20000, 0x02000},
586 {"default-mac", 0x30000, 0x00020},
587 {"support-list", 0x31000, 0x00100},
588 {"product-info", 0x31100, 0x00100},
589 {"soft-version", 0x32000, 0x00100},
590 {"os-image", 0x40000, 0x180000},
591 {"file-system", 0x1c0000, 0x600000},
592 {"user-config", 0x7c0000, 0x10000},
593 {"backup-config", 0x7d0000, 0x10000},
594 {"log", 0x7e0000, 0x10000},
595 {"radio", 0x7f0000, 0x10000},
599 .first_sysupgrade_partition
= "os-image",
600 .last_sysupgrade_partition
= "file-system"
603 /** Firmware layout for the TL-WA850RE v2 */
609 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:55530000}\n"
610 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:00000000}\n"
611 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:55534100}\n"
612 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:45550000}\n"
613 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:4B520000}\n"
614 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:42520000}\n"
615 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:4A500000}\n"
616 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:43410000}\n"
617 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:41550000}\n"
618 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:52550000}\n",
619 .support_trail
= '\x00',
623 576KB were moved from file-system to os-image
624 in comparison to the stock image
627 {"fs-uboot", 0x00000, 0x20000},
628 {"os-image", 0x20000, 0x150000},
629 {"file-system", 0x170000, 0x240000},
630 {"partition-table", 0x3b0000, 0x02000},
631 {"default-mac", 0x3c0000, 0x00020},
632 {"pin", 0x3c0100, 0x00020},
633 {"product-info", 0x3c1000, 0x01000},
634 {"soft-version", 0x3c2000, 0x00100},
635 {"support-list", 0x3c3000, 0x01000},
636 {"profile", 0x3c4000, 0x08000},
637 {"user-config", 0x3d0000, 0x10000},
638 {"default-config", 0x3e0000, 0x10000},
639 {"radio", 0x3f0000, 0x10000},
643 .first_sysupgrade_partition
= "os-image",
644 .last_sysupgrade_partition
= "file-system"
647 /** Firmware layout for the TL-WA855RE v1 */
653 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:00000000}\n"
654 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:55530000}\n"
655 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:45550000}\n"
656 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:4B520000}\n"
657 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:42520000}\n"
658 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:4A500000}\n"
659 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:43410000}\n"
660 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:41550000}\n"
661 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:52550000}\n",
662 .support_trail
= '\x00',
666 {"fs-uboot", 0x00000, 0x20000},
667 {"os-image", 0x20000, 0x150000},
668 {"file-system", 0x170000, 0x240000},
669 {"partition-table", 0x3b0000, 0x02000},
670 {"default-mac", 0x3c0000, 0x00020},
671 {"pin", 0x3c0100, 0x00020},
672 {"product-info", 0x3c1000, 0x01000},
673 {"soft-version", 0x3c2000, 0x00100},
674 {"support-list", 0x3c3000, 0x01000},
675 {"profile", 0x3c4000, 0x08000},
676 {"user-config", 0x3d0000, 0x10000},
677 {"default-config", 0x3e0000, 0x10000},
678 {"radio", 0x3f0000, 0x10000},
682 .first_sysupgrade_partition
= "os-image",
683 .last_sysupgrade_partition
= "file-system"
686 /** Firmware layout for the TL-WR1043 v5 */
692 "{product_name:TL-WR1043N,product_ver:5.0.0,special_id:45550000}\n"
693 "{product_name:TL-WR1043N,product_ver:5.0.0,special_id:55530000}\n",
694 .support_trail
= '\x00',
695 .soft_ver
= "soft_ver:1.0.0\n",
697 {"factory-boot", 0x00000, 0x20000},
698 {"fs-uboot", 0x20000, 0x20000},
699 {"os-image", 0x40000, 0x180000},
700 {"file-system", 0x1c0000, 0xd40000},
701 {"default-mac", 0xf00000, 0x00200},
702 {"pin", 0xf00200, 0x00200},
703 {"device-id", 0xf00400, 0x00100},
704 {"product-info", 0xf00500, 0x0fb00},
705 {"soft-version", 0xf10000, 0x01000},
706 {"extra-para", 0xf11000, 0x01000},
707 {"support-list", 0xf12000, 0x0a000},
708 {"profile", 0xf1c000, 0x04000},
709 {"default-config", 0xf20000, 0x10000},
710 {"user-config", 0xf30000, 0x40000},
711 {"qos-db", 0xf70000, 0x40000},
712 {"certificate", 0xfb0000, 0x10000},
713 {"partition-table", 0xfc0000, 0x10000},
714 {"log", 0xfd0000, 0x20000},
715 {"radio", 0xff0000, 0x10000},
718 .first_sysupgrade_partition
= "os-image",
719 .last_sysupgrade_partition
= "file-system"
722 /** Firmware layout for the TL-WR1043 v4 */
724 .id
= "TLWR1043NDV4",
728 "{product_name:TL-WR1043ND,product_ver:4.0.0,special_id:45550000}\n",
729 .support_trail
= '\x00',
733 We use a bigger os-image partition than the stock images (and thus
734 smaller file-system), as our kernel doesn't fit in the stock firmware's
738 {"fs-uboot", 0x00000, 0x20000},
739 {"os-image", 0x20000, 0x180000},
740 {"file-system", 0x1a0000, 0xdb0000},
741 {"default-mac", 0xf50000, 0x00200},
742 {"pin", 0xf50200, 0x00200},
743 {"product-info", 0xf50400, 0x0fc00},
744 {"soft-version", 0xf60000, 0x0b000},
745 {"support-list", 0xf6b000, 0x04000},
746 {"profile", 0xf70000, 0x04000},
747 {"default-config", 0xf74000, 0x0b000},
748 {"user-config", 0xf80000, 0x40000},
749 {"partition-table", 0xfc0000, 0x10000},
750 {"log", 0xfd0000, 0x20000},
751 {"radio", 0xff0000, 0x10000},
755 .first_sysupgrade_partition
= "os-image",
756 .last_sysupgrade_partition
= "file-system"
759 /** Firmware layout for the TL-WR902AC v1 */
761 .id
= "TL-WR902AC-V1",
765 "{product_name:TL-WR902AC,product_ver:1.0.0,special_id:45550000}\n"
766 "{product_name:TL-WR902AC,product_ver:1.0.0,special_id:55530000}\n",
767 .support_trail
= '\x00',
771 384KB were moved from file-system to os-image
772 in comparison to the stock image
775 {"fs-uboot", 0x00000, 0x20000},
776 {"os-image", 0x20000, 0x180000},
777 {"file-system", 0x1a0000, 0x5b0000},
778 {"default-mac", 0x750000, 0x00200},
779 {"pin", 0x750200, 0x00200},
780 {"product-info", 0x750400, 0x0fc00},
781 {"soft-version", 0x760000, 0x0b000},
782 {"support-list", 0x76b000, 0x04000},
783 {"profile", 0x770000, 0x04000},
784 {"default-config", 0x774000, 0x0b000},
785 {"user-config", 0x780000, 0x40000},
786 {"partition-table", 0x7c0000, 0x10000},
787 {"log", 0x7d0000, 0x20000},
788 {"radio", 0x7f0000, 0x10000},
792 .first_sysupgrade_partition
= "os-image",
793 .last_sysupgrade_partition
= "file-system",
796 /** Firmware layout for the TL-WR942N V1 */
802 "{product_name:TL-WR942N,product_ver:1.0.0,special_id:00000000}\r\n"
803 "{product_name:TL-WR942N,product_ver:1.0.0,special_id:52550000}\r\n",
804 .support_trail
= '\x00',
808 {"fs-uboot", 0x00000, 0x20000},
809 {"os-image", 0x20000, 0x180000},
810 {"file-system", 0x1a0000, 0xca0000},
811 {"default-mac", 0xe40000, 0x00200},
812 {"pin", 0xe40200, 0x00200},
813 {"product-info", 0xe40400, 0x0fc00},
814 {"partition-table", 0xe50000, 0x10000},
815 {"soft-version", 0xe60000, 0x10000},
816 {"support-list", 0xe70000, 0x10000},
817 {"profile", 0xe80000, 0x10000},
818 {"default-config", 0xe90000, 0x10000},
819 {"user-config", 0xea0000, 0x40000},
820 {"qos-db", 0xee0000, 0x40000},
821 {"certificate", 0xf20000, 0x10000},
822 {"usb-config", 0xfb0000, 0x10000},
823 {"log", 0xfc0000, 0x20000},
824 {"radio-bk", 0xfe0000, 0x10000},
825 {"radio", 0xff0000, 0x10000},
829 .first_sysupgrade_partition
= "os-image",
830 .last_sysupgrade_partition
= "file-system",
833 /** Firmware layout for the RE350 v1 */
839 "{product_name:RE350,product_ver:1.0.0,special_id:45550000}\n"
840 "{product_name:RE350,product_ver:1.0.0,special_id:00000000}\n"
841 "{product_name:RE350,product_ver:1.0.0,special_id:41550000}\n"
842 "{product_name:RE350,product_ver:1.0.0,special_id:55530000}\n"
843 "{product_name:RE350,product_ver:1.0.0,special_id:43410000}\n"
844 "{product_name:RE350,product_ver:1.0.0,special_id:4b520000}\n"
845 "{product_name:RE350,product_ver:1.0.0,special_id:4a500000}\n",
846 .support_trail
= '\x00',
850 The original os-image partition is too small,
851 so we enlarge it to 1.6M
854 {"fs-uboot", 0x00000, 0x20000},
855 {"os-image", 0x20000, 0x1a0000},
856 {"file-system", 0x1c0000, 0x440000},
857 {"partition-table", 0x600000, 0x02000},
858 {"default-mac", 0x610000, 0x00020},
859 {"pin", 0x610100, 0x00020},
860 {"product-info", 0x611100, 0x01000},
861 {"soft-version", 0x620000, 0x01000},
862 {"support-list", 0x621000, 0x01000},
863 {"profile", 0x622000, 0x08000},
864 {"user-config", 0x630000, 0x10000},
865 {"default-config", 0x640000, 0x10000},
866 {"radio", 0x7f0000, 0x10000},
870 .first_sysupgrade_partition
= "os-image",
871 .last_sysupgrade_partition
= "file-system"
874 /** Firmware layout for the RE450 */
880 "{product_name:RE450,product_ver:1.0.0,special_id:00000000}\r\n"
881 "{product_name:RE450,product_ver:1.0.0,special_id:55530000}\r\n"
882 "{product_name:RE450,product_ver:1.0.0,special_id:45550000}\r\n"
883 "{product_name:RE450,product_ver:1.0.0,special_id:4A500000}\r\n"
884 "{product_name:RE450,product_ver:1.0.0,special_id:43410000}\r\n"
885 "{product_name:RE450,product_ver:1.0.0,special_id:41550000}\r\n"
886 "{product_name:RE450,product_ver:1.0.0,special_id:4B520000}\r\n"
887 "{product_name:RE450,product_ver:1.0.0,special_id:55534100}\r\n",
888 .support_trail
= '\x00',
892 The flash partition table for RE450;
893 it is almost the same as the one used by the stock images,
894 576KB were moved from file-system to os-image.
897 {"fs-uboot", 0x00000, 0x20000},
898 {"os-image", 0x20000, 0x180000},
899 {"file-system", 0x1a0000, 0x460000},
900 {"partition-table", 0x600000, 0x02000},
901 {"default-mac", 0x610000, 0x00020},
902 {"pin", 0x610100, 0x00020},
903 {"product-info", 0x611100, 0x01000},
904 {"soft-version", 0x620000, 0x01000},
905 {"support-list", 0x621000, 0x01000},
906 {"profile", 0x622000, 0x08000},
907 {"user-config", 0x630000, 0x10000},
908 {"default-config", 0x640000, 0x10000},
909 {"radio", 0x7f0000, 0x10000},
913 .first_sysupgrade_partition
= "os-image",
914 .last_sysupgrade_partition
= "file-system"
920 #define error(_ret, _errno, _str, ...) \
922 fprintf(stderr, _str ": %s\n", ## __VA_ARGS__, \
929 /** Stores a uint32 as big endian */
930 static inline void put32(uint8_t *buf
, uint32_t val
) {
937 /** Allocates a new image partition */
938 static struct image_partition_entry
alloc_image_partition(const char *name
, size_t len
) {
939 struct image_partition_entry entry
= {name
, len
, malloc(len
)};
941 error(1, errno
, "malloc");
946 /** Frees an image partition */
947 static void free_image_partition(struct image_partition_entry entry
) {
951 static time_t source_date_epoch
= -1;
952 static void set_source_date_epoch() {
953 char *env
= getenv("SOURCE_DATE_EPOCH");
957 source_date_epoch
= strtoull(env
, &endptr
, 10);
958 if (errno
|| (endptr
&& *endptr
!= '\0')) {
959 fprintf(stderr
, "Invalid SOURCE_DATE_EPOCH");
965 /** Generates the partition-table partition */
966 static struct image_partition_entry
make_partition_table(const struct flash_partition_entry
*p
) {
967 struct image_partition_entry entry
= alloc_image_partition("partition-table", 0x800);
969 char *s
= (char *)entry
.data
, *end
= (char *)(s
+entry
.size
);
977 for (i
= 0; p
[i
].name
; i
++) {
979 size_t w
= snprintf(s
, len
, "partition %s base 0x%05x size 0x%05x\n", p
[i
].name
, p
[i
].base
, p
[i
].size
);
982 error(1, 0, "flash partition table overflow?");
989 memset(s
, 0xff, end
-s
);
995 /** Generates a binary-coded decimal representation of an integer in the range [0, 99] */
996 static inline uint8_t bcd(uint8_t v
) {
997 return 0x10 * (v
/10) + v
%10;
1001 /** Generates the soft-version partition */
1002 static struct image_partition_entry
make_soft_version(uint32_t rev
) {
1003 struct image_partition_entry entry
= alloc_image_partition("soft-version", sizeof(struct soft_version
));
1004 struct soft_version
*s
= (struct soft_version
*)entry
.data
;
1008 if (source_date_epoch
!= -1)
1009 t
= source_date_epoch
;
1010 else if (time(&t
) == (time_t)(-1))
1011 error(1, errno
, "time");
1013 struct tm
*tm
= localtime(&t
);
1015 s
->magic
= htonl(0x0000000c);
1019 s
->version_major
= 0;
1020 s
->version_minor
= 0;
1021 s
->version_patch
= 0;
1023 s
->year_hi
= bcd((1900+tm
->tm_year
)/100);
1024 s
->year_lo
= bcd(tm
->tm_year
%100);
1025 s
->month
= bcd(tm
->tm_mon
+1);
1026 s
->day
= bcd(tm
->tm_mday
);
1027 s
->rev
= htonl(rev
);
1034 static struct image_partition_entry
make_soft_version_from_string(const char *soft_ver
) {
1035 /** String length _including_ the terminating zero byte */
1036 uint32_t ver_len
= strlen(soft_ver
) + 1;
1037 /** Partition contains 64 bit header, the version string, and one additional null byte */
1038 size_t partition_len
= 2*sizeof(uint32_t) + ver_len
+ 1;
1039 struct image_partition_entry entry
= alloc_image_partition("soft-version", partition_len
);
1041 uint32_t *len
= (uint32_t *)entry
.data
;
1042 len
[0] = htonl(ver_len
);
1044 memcpy(&len
[2], soft_ver
, ver_len
);
1046 entry
.data
[partition_len
- 1] = 0;
1051 /** Generates the support-list partition */
1052 static struct image_partition_entry
make_support_list(const struct device_info
*info
) {
1053 size_t len
= strlen(info
->support_list
);
1054 struct image_partition_entry entry
= alloc_image_partition("support-list", len
+ 9);
1056 put32(entry
.data
, len
);
1057 memset(entry
.data
+4, 0, 4);
1058 memcpy(entry
.data
+8, info
->support_list
, len
);
1059 entry
.data
[len
+8] = info
->support_trail
;
1064 /** Creates a new image partition with an arbitrary name from a file */
1065 static struct image_partition_entry
read_file(const char *part_name
, const char *filename
, bool add_jffs2_eof
) {
1066 struct stat statbuf
;
1068 if (stat(filename
, &statbuf
) < 0)
1069 error(1, errno
, "unable to stat file `%s'", filename
);
1071 size_t len
= statbuf
.st_size
;
1074 len
= ALIGN(len
, 0x10000) + sizeof(jffs2_eof_mark
);
1076 struct image_partition_entry entry
= alloc_image_partition(part_name
, len
);
1078 FILE *file
= fopen(filename
, "rb");
1080 error(1, errno
, "unable to open file `%s'", filename
);
1082 if (fread(entry
.data
, statbuf
.st_size
, 1, file
) != 1)
1083 error(1, errno
, "unable to read file `%s'", filename
);
1085 if (add_jffs2_eof
) {
1086 uint8_t *eof
= entry
.data
+ statbuf
.st_size
, *end
= entry
.data
+entry
.size
;
1088 memset(eof
, 0xff, end
- eof
- sizeof(jffs2_eof_mark
));
1089 memcpy(end
- sizeof(jffs2_eof_mark
), jffs2_eof_mark
, sizeof(jffs2_eof_mark
));
1097 /** Creates a new image partition from arbitrary data */
1098 static struct image_partition_entry
put_data(const char *part_name
, const char *datain
, size_t len
) {
1100 struct image_partition_entry entry
= alloc_image_partition(part_name
, len
);
1102 memcpy(entry
.data
, datain
, len
);
1108 Copies a list of image partitions into an image buffer and generates the image partition table while doing so
1110 Example image partition table:
1112 fwup-ptn partition-table base 0x00800 size 0x00800
1113 fwup-ptn os-image base 0x01000 size 0x113b45
1114 fwup-ptn file-system base 0x114b45 size 0x1d0004
1115 fwup-ptn support-list base 0x2e4b49 size 0x000d1
1117 Each line of the partition table is terminated with the bytes 09 0d 0a ("\t\r\n"),
1118 the end of the partition table is marked with a zero byte.
1120 The firmware image must contain at least the partition-table and support-list partitions
1121 to be accepted. There aren't any alignment constraints for the image partitions.
1123 The partition-table partition contains the actual flash layout; partitions
1124 from the image partition table are mapped to the corresponding flash partitions during
1125 the firmware upgrade. The support-list partition contains a list of devices supported by
1128 The base offsets in the firmware partition table are relative to the end
1129 of the vendor information block, so the partition-table partition will
1130 actually start at offset 0x1814 of the image.
1132 I think partition-table must be the first partition in the firmware image.
1134 static void put_partitions(uint8_t *buffer
, const struct flash_partition_entry
*flash_parts
, const struct image_partition_entry
*parts
) {
1136 char *image_pt
= (char *)buffer
, *end
= image_pt
+ 0x800;
1138 size_t base
= 0x800;
1139 for (i
= 0; parts
[i
].name
; i
++) {
1140 for (j
= 0; flash_parts
[j
].name
; j
++) {
1141 if (!strcmp(flash_parts
[j
].name
, parts
[i
].name
)) {
1142 if (parts
[i
].size
> flash_parts
[j
].size
)
1143 error(1, 0, "%s partition too big (more than %u bytes)", flash_parts
[j
].name
, (unsigned)flash_parts
[j
].size
);
1148 assert(flash_parts
[j
].name
);
1150 memcpy(buffer
+ base
, parts
[i
].data
, parts
[i
].size
);
1152 size_t len
= end
-image_pt
;
1153 size_t w
= snprintf(image_pt
, len
, "fwup-ptn %s base 0x%05x size 0x%05x\t\r\n", parts
[i
].name
, (unsigned)base
, (unsigned)parts
[i
].size
);
1156 error(1, 0, "image partition table overflow?");
1160 base
+= parts
[i
].size
;
1164 /** Generates and writes the image MD5 checksum */
1165 static void put_md5(uint8_t *md5
, uint8_t *buffer
, unsigned int len
) {
1169 MD5_Update(&ctx
, md5_salt
, (unsigned int)sizeof(md5_salt
));
1170 MD5_Update(&ctx
, buffer
, len
);
1171 MD5_Final(md5
, &ctx
);
1176 Generates the firmware image in factory format
1182 0000-0003 Image size (4 bytes, big endian)
1183 0004-0013 MD5 hash (hash of a 16 byte salt and the image data starting with byte 0x14)
1184 0014-0017 Vendor information length (without padding) (4 bytes, big endian)
1185 0018-1013 Vendor information (4092 bytes, padded with 0xff; there seem to be older
1186 (VxWorks-based) TP-LINK devices which use a smaller vendor information block)
1187 1014-1813 Image partition table (2048 bytes, padded with 0xff)
1188 1814-xxxx Firmware partitions
1190 static void * generate_factory_image(const struct device_info
*info
, const struct image_partition_entry
*parts
, size_t *len
) {
1194 for (i
= 0; parts
[i
].name
; i
++)
1195 *len
+= parts
[i
].size
;
1197 uint8_t *image
= malloc(*len
);
1199 error(1, errno
, "malloc");
1201 memset(image
, 0xff, *len
);
1205 size_t vendor_len
= strlen(info
->vendor
);
1206 put32(image
+0x14, vendor_len
);
1207 memcpy(image
+0x18, info
->vendor
, vendor_len
);
1210 put_partitions(image
+ 0x1014, info
->partitions
, parts
);
1211 put_md5(image
+0x04, image
+0x14, *len
-0x14);
1217 Generates the firmware image in sysupgrade format
1219 This makes some assumptions about the provided flash and image partition tables and
1220 should be generalized when TP-LINK starts building its safeloader into hardware with
1221 different flash layouts.
1223 static void * generate_sysupgrade_image(const struct device_info
*info
, const struct image_partition_entry
*image_parts
, size_t *len
) {
1225 size_t flash_first_partition_index
= 0;
1226 size_t flash_last_partition_index
= 0;
1227 const struct flash_partition_entry
*flash_first_partition
= NULL
;
1228 const struct flash_partition_entry
*flash_last_partition
= NULL
;
1229 const struct image_partition_entry
*image_last_partition
= NULL
;
1231 /** Find first and last partitions */
1232 for (i
= 0; info
->partitions
[i
].name
; i
++) {
1233 if (!strcmp(info
->partitions
[i
].name
, info
->first_sysupgrade_partition
)) {
1234 flash_first_partition
= &info
->partitions
[i
];
1235 flash_first_partition_index
= i
;
1236 } else if (!strcmp(info
->partitions
[i
].name
, info
->last_sysupgrade_partition
)) {
1237 flash_last_partition
= &info
->partitions
[i
];
1238 flash_last_partition_index
= i
;
1242 assert(flash_first_partition
&& flash_last_partition
);
1243 assert(flash_first_partition_index
< flash_last_partition_index
);
1245 /** Find last partition from image to calculate needed size */
1246 for (i
= 0; image_parts
[i
].name
; i
++) {
1247 if (!strcmp(image_parts
[i
].name
, info
->last_sysupgrade_partition
)) {
1248 image_last_partition
= &image_parts
[i
];
1253 assert(image_last_partition
);
1255 *len
= flash_last_partition
->base
- flash_first_partition
->base
+ image_last_partition
->size
;
1257 uint8_t *image
= malloc(*len
);
1259 error(1, errno
, "malloc");
1261 memset(image
, 0xff, *len
);
1263 for (i
= flash_first_partition_index
; i
<= flash_last_partition_index
; i
++) {
1264 for (j
= 0; image_parts
[j
].name
; j
++) {
1265 if (!strcmp(info
->partitions
[i
].name
, image_parts
[j
].name
)) {
1266 if (image_parts
[j
].size
> info
->partitions
[i
].size
)
1267 error(1, 0, "%s partition too big (more than %u bytes)", info
->partitions
[i
].name
, (unsigned)info
->partitions
[i
].size
);
1268 memcpy(image
+ info
->partitions
[i
].base
- flash_first_partition
->base
, image_parts
[j
].data
, image_parts
[j
].size
);
1272 assert(image_parts
[j
].name
);
1279 /** Generates an image according to a given layout and writes it to a file */
1280 static void build_image(const char *output
,
1281 const char *kernel_image
,
1282 const char *rootfs_image
,
1286 const struct device_info
*info
) {
1288 struct image_partition_entry parts
[7] = {};
1290 parts
[0] = make_partition_table(info
->partitions
);
1292 parts
[1] = make_soft_version_from_string(info
->soft_ver
);
1294 parts
[1] = make_soft_version(rev
);
1296 parts
[2] = make_support_list(info
);
1297 parts
[3] = read_file("os-image", kernel_image
, false);
1298 parts
[4] = read_file("file-system", rootfs_image
, add_jffs2_eof
);
1300 /* Some devices need the extra-para partition to accept the firmware */
1301 if (strcasecmp(info
->id
, "ARCHER-C25-V1") == 0 ||
1302 strcasecmp(info
->id
, "TLWR1043NV5") == 0) {
1303 const char mdat
[11] = {0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00};
1304 parts
[5] = put_data("extra-para", mdat
, 11);
1305 } else if (strcasecmp(info
->id
, "ARCHER-C7-V4") == 0) {
1306 const char mdat
[11] = {0x01, 0x00, 0x00, 0x02, 0x00, 0x00, 0xca, 0x00, 0x01, 0x00, 0x00};
1307 parts
[5] = put_data("extra-para", mdat
, 11);
1313 image
= generate_sysupgrade_image(info
, parts
, &len
);
1315 image
= generate_factory_image(info
, parts
, &len
);
1317 FILE *file
= fopen(output
, "wb");
1319 error(1, errno
, "unable to open output file");
1321 if (fwrite(image
, len
, 1, file
) != 1)
1322 error(1, 0, "unable to write output file");
1329 for (i
= 0; parts
[i
].name
; i
++)
1330 free_image_partition(parts
[i
]);
1334 static void usage(const char *argv0
) {
1336 "Usage: %s [OPTIONS...]\n"
1339 " -B <board> create image for the board specified with <board>\n"
1340 " -k <file> read kernel image from the file <file>\n"
1341 " -r <file> read rootfs image from the file <file>\n"
1342 " -o <file> write output to the file <file>\n"
1343 " -V <rev> sets the revision number to <rev>\n"
1344 " -j add jffs2 end-of-filesystem markers\n"
1345 " -S create sysupgrade instead of factory image\n"
1346 " -h show this help\n",
1352 static const struct device_info
*find_board(const char *id
)
1354 struct device_info
*board
= NULL
;
1356 for (board
= boards
; board
->id
!= NULL
; board
++)
1357 if (strcasecmp(id
, board
->id
) == 0)
1363 int main(int argc
, char *argv
[]) {
1364 const char *board
= NULL
, *kernel_image
= NULL
, *rootfs_image
= NULL
, *output
= NULL
;
1365 bool add_jffs2_eof
= false, sysupgrade
= false;
1367 const struct device_info
*info
;
1368 set_source_date_epoch();
1373 c
= getopt(argc
, argv
, "B:k:r:o:V:jSh");
1383 kernel_image
= optarg
;
1387 rootfs_image
= optarg
;
1395 sscanf(optarg
, "r%u", &rev
);
1399 add_jffs2_eof
= true;
1417 error(1, 0, "no board has been specified");
1419 error(1, 0, "no kernel image has been specified");
1421 error(1, 0, "no rootfs image has been specified");
1423 error(1, 0, "no output filename has been specified");
1425 info
= find_board(board
);
1428 error(1, 0, "unsupported board %s", board
);
1430 build_image(output
, kernel_image
, rootfs_image
, rev
, add_jffs2_eof
, sysupgrade
, info
);