2 Copyright (c) 2014, Matthias Schiffer <mschiffer@universe-factory.net>
5 Redistribution and use in source and binary forms, with or without
6 modification, are permitted provided that the following conditions are met:
8 1. Redistributions of source code must retain the above copyright notice,
9 this list of conditions and the following disclaimer.
10 2. Redistributions in binary form must reproduce the above copyright notice,
11 this list of conditions and the following disclaimer in the documentation
12 and/or other materials provided with the distribution.
14 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
15 AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16 IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
17 DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
18 FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19 DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
20 SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
21 CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
22 OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
23 OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
30 Image generation tool for the TP-LINK SafeLoader as seen on
31 TP-LINK Pharos devices (CPE210/220/510/520)
45 #include <arpa/inet.h>
47 #include <sys/types.h>
54 #define ALIGN(x,a) ({ typeof(a) __a = (a); (((x) + __a - 1) & ~(__a - 1)); })
57 #define MAX_PARTITIONS 32
59 /** An image partition table entry */
60 struct image_partition_entry
{
66 /** A flash partition table entry */
67 struct flash_partition_entry
{
73 /** Firmware layout description */
77 const char *support_list
;
80 uint32_t soft_ver_compat_level
;
81 struct flash_partition_entry partitions
[MAX_PARTITIONS
+1];
82 const char *first_sysupgrade_partition
;
83 const char *last_sysupgrade_partition
;
86 /** The content of the soft-version structure */
87 struct __attribute__((__packed__
)) soft_version
{
91 uint8_t version_major
;
92 uint8_t version_minor
;
93 uint8_t version_patch
;
102 static const uint8_t jffs2_eof_mark
[4] = {0xde, 0xad, 0xc0, 0xde};
106 Salt for the MD5 hash
108 Fortunately, TP-LINK seems to use the same salt for most devices which use
109 the new image format.
111 static const uint8_t md5_salt
[16] = {
112 0x7a, 0x2b, 0x15, 0xed,
113 0x9b, 0x98, 0x59, 0x6d,
114 0xe5, 0x04, 0xab, 0x44,
115 0xac, 0x2a, 0x9f, 0x4e,
119 /** Firmware layout table */
120 static struct device_info boards
[] = {
121 /** Firmware layout for the CPE210/220 V1 */
124 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
127 "CPE210(TP-LINK|UN|N300-2):1.0\r\n"
128 "CPE210(TP-LINK|UN|N300-2):1.1\r\n"
129 "CPE210(TP-LINK|US|N300-2):1.1\r\n"
130 "CPE210(TP-LINK|EU|N300-2):1.1\r\n"
131 "CPE220(TP-LINK|UN|N300-2):1.1\r\n"
132 "CPE220(TP-LINK|US|N300-2):1.1\r\n"
133 "CPE220(TP-LINK|EU|N300-2):1.1\r\n",
134 .support_trail
= '\xff',
138 {"fs-uboot", 0x00000, 0x20000},
139 {"partition-table", 0x20000, 0x02000},
140 {"default-mac", 0x30000, 0x00020},
141 {"product-info", 0x31100, 0x00100},
142 {"signature", 0x32000, 0x00400},
143 {"os-image", 0x40000, 0x300000},
144 {"file-system", 0x340000, 0x470000},
145 {"soft-version", 0x7b0000, 0x00100},
146 {"support-list", 0x7b1000, 0x00400},
147 {"user-config", 0x7c0000, 0x10000},
148 {"default-config", 0x7d0000, 0x10000},
149 {"log", 0x7e0000, 0x10000},
150 {"radio", 0x7f0000, 0x10000},
154 .first_sysupgrade_partition
= "os-image",
155 .last_sysupgrade_partition
= "support-list",
158 /** Firmware layout for the CPE210 V2 */
161 .vendor
= "CPE210(TP-LINK|UN|N300-2|00000000):2.0\r\n",
164 "CPE210(TP-LINK|EU|N300-2|00000000):2.0\r\n"
165 "CPE210(TP-LINK|EU|N300-2|45550000):2.0\r\n"
166 "CPE210(TP-LINK|EU|N300-2|55530000):2.0\r\n"
167 "CPE210(TP-LINK|UN|N300-2|00000000):2.0\r\n"
168 "CPE210(TP-LINK|UN|N300-2|45550000):2.0\r\n"
169 "CPE210(TP-LINK|UN|N300-2|55530000):2.0\r\n"
170 "CPE210(TP-LINK|US|N300-2|55530000):2.0\r\n"
171 "CPE210(TP-LINK|UN|N300-2):2.0\r\n"
172 "CPE210(TP-LINK|EU|N300-2):2.0\r\n"
173 "CPE210(TP-LINK|US|N300-2):2.0\r\n",
174 .support_trail
= '\xff',
178 {"fs-uboot", 0x00000, 0x20000},
179 {"partition-table", 0x20000, 0x02000},
180 {"default-mac", 0x30000, 0x00020},
181 {"product-info", 0x31100, 0x00100},
182 {"device-info", 0x31400, 0x00400},
183 {"signature", 0x32000, 0x00400},
184 {"device-id", 0x33000, 0x00100},
185 {"firmware", 0x40000, 0x770000},
186 {"soft-version", 0x7b0000, 0x00100},
187 {"support-list", 0x7b1000, 0x01000},
188 {"user-config", 0x7c0000, 0x10000},
189 {"default-config", 0x7d0000, 0x10000},
190 {"log", 0x7e0000, 0x10000},
191 {"radio", 0x7f0000, 0x10000},
195 .first_sysupgrade_partition
= "os-image",
196 .last_sysupgrade_partition
= "support-list",
199 /** Firmware layout for the CPE210 V3 */
202 .vendor
= "CPE210(TP-LINK|UN|N300-2|00000000):3.0\r\n",
205 "CPE210(TP-LINK|EU|N300-2|45550000):3.0\r\n"
206 "CPE210(TP-LINK|UN|N300-2|00000000):3.0\r\n"
207 "CPE210(TP-LINK|US|N300-2|55530000):3.0\r\n"
208 "CPE210(TP-LINK|UN|N300-2):3.0\r\n"
209 "CPE210(TP-LINK|EU|N300-2):3.0\r\n"
210 "CPE210(TP-LINK|EU|N300-2|45550000):3.1\r\n"
211 "CPE210(TP-LINK|UN|N300-2|00000000):3.1\r\n"
212 "CPE210(TP-LINK|US|N300-2|55530000):3.1\r\n"
213 "CPE210(TP-LINK|EU|N300-2|45550000):3.20\r\n"
214 "CPE210(TP-LINK|UN|N300-2|00000000):3.20\r\n"
215 "CPE210(TP-LINK|US|N300-2|55530000):3.20\r\n",
216 .support_trail
= '\xff',
220 {"fs-uboot", 0x00000, 0x20000},
221 {"partition-table", 0x20000, 0x01000},
222 {"default-mac", 0x30000, 0x00020},
223 {"product-info", 0x31100, 0x00100},
224 {"device-info", 0x31400, 0x00400},
225 {"signature", 0x32000, 0x00400},
226 {"device-id", 0x33000, 0x00100},
227 {"firmware", 0x40000, 0x770000},
228 {"soft-version", 0x7b0000, 0x00100},
229 {"support-list", 0x7b1000, 0x01000},
230 {"user-config", 0x7c0000, 0x10000},
231 {"default-config", 0x7d0000, 0x10000},
232 {"log", 0x7e0000, 0x10000},
233 {"radio", 0x7f0000, 0x10000},
237 .first_sysupgrade_partition
= "os-image",
238 .last_sysupgrade_partition
= "support-list",
241 /** Firmware layout for the CPE220 V2 */
244 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
247 "CPE220(TP-LINK|EU|N300-2|00000000):2.0\r\n"
248 "CPE220(TP-LINK|EU|N300-2|45550000):2.0\r\n"
249 "CPE220(TP-LINK|EU|N300-2|55530000):2.0\r\n"
250 "CPE220(TP-LINK|UN|N300-2|00000000):2.0\r\n"
251 "CPE220(TP-LINK|UN|N300-2|45550000):2.0\r\n"
252 "CPE220(TP-LINK|UN|N300-2|55530000):2.0\r\n"
253 "CPE220(TP-LINK|US|N300-2|55530000):2.0\r\n"
254 "CPE220(TP-LINK|UN|N300-2):2.0\r\n"
255 "CPE220(TP-LINK|EU|N300-2):2.0\r\n"
256 "CPE220(TP-LINK|US|N300-2):2.0\r\n",
257 .support_trail
= '\xff',
261 {"fs-uboot", 0x00000, 0x20000},
262 {"partition-table", 0x20000, 0x02000},
263 {"default-mac", 0x30000, 0x00020},
264 {"product-info", 0x31100, 0x00100},
265 {"signature", 0x32000, 0x00400},
266 {"os-image", 0x40000, 0x300000},
267 {"file-system", 0x340000, 0x470000},
268 {"soft-version", 0x7b0000, 0x00100},
269 {"support-list", 0x7b1000, 0x00400},
270 {"user-config", 0x7c0000, 0x10000},
271 {"default-config", 0x7d0000, 0x10000},
272 {"log", 0x7e0000, 0x10000},
273 {"radio", 0x7f0000, 0x10000},
277 .first_sysupgrade_partition
= "os-image",
278 .last_sysupgrade_partition
= "support-list",
281 /** Firmware layout for the CPE220 V3 */
284 .vendor
= "CPE220(TP-LINK|UN|N300-2|00000000):3.0\r\n",
287 "CPE220(TP-LINK|EU|N300-2|00000000):3.0\r\n"
288 "CPE220(TP-LINK|EU|N300-2|45550000):3.0\r\n"
289 "CPE220(TP-LINK|EU|N300-2|55530000):3.0\r\n"
290 "CPE220(TP-LINK|UN|N300-2|00000000):3.0\r\n"
291 "CPE220(TP-LINK|UN|N300-2|45550000):3.0\r\n"
292 "CPE220(TP-LINK|UN|N300-2|55530000):3.0\r\n"
293 "CPE220(TP-LINK|US|N300-2|55530000):3.0\r\n"
294 "CPE220(TP-LINK|UN|N300-2):3.0\r\n"
295 "CPE220(TP-LINK|EU|N300-2):3.0\r\n"
296 "CPE220(TP-LINK|US|N300-2):3.0\r\n",
297 .support_trail
= '\xff',
301 {"fs-uboot", 0x00000, 0x20000},
302 {"partition-table", 0x20000, 0x02000},
303 {"default-mac", 0x30000, 0x00020},
304 {"product-info", 0x31100, 0x00100},
305 {"device-info", 0x31400, 0x00400},
306 {"signature", 0x32000, 0x00400},
307 {"device-id", 0x33000, 0x00100},
308 {"firmware", 0x40000, 0x770000},
309 {"soft-version", 0x7b0000, 0x00100},
310 {"support-list", 0x7b1000, 0x01000},
311 {"user-config", 0x7c0000, 0x10000},
312 {"default-config", 0x7d0000, 0x10000},
313 {"log", 0x7e0000, 0x10000},
314 {"radio", 0x7f0000, 0x10000},
318 .first_sysupgrade_partition
= "os-image",
319 .last_sysupgrade_partition
= "support-list",
322 /** Firmware layout for the CPE510/520 V1 */
325 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
328 "CPE510(TP-LINK|UN|N300-5):1.0\r\n"
329 "CPE510(TP-LINK|UN|N300-5):1.1\r\n"
330 "CPE510(TP-LINK|UN|N300-5):1.1\r\n"
331 "CPE510(TP-LINK|US|N300-5):1.1\r\n"
332 "CPE510(TP-LINK|EU|N300-5):1.1\r\n"
333 "CPE520(TP-LINK|UN|N300-5):1.1\r\n"
334 "CPE520(TP-LINK|US|N300-5):1.1\r\n"
335 "CPE520(TP-LINK|EU|N300-5):1.1\r\n",
336 .support_trail
= '\xff',
340 {"fs-uboot", 0x00000, 0x20000},
341 {"partition-table", 0x20000, 0x02000},
342 {"default-mac", 0x30000, 0x00020},
343 {"product-info", 0x31100, 0x00100},
344 {"signature", 0x32000, 0x00400},
345 {"os-image", 0x40000, 0x300000},
346 {"file-system", 0x340000, 0x470000},
347 {"soft-version", 0x7b0000, 0x00100},
348 {"support-list", 0x7b1000, 0x00400},
349 {"user-config", 0x7c0000, 0x10000},
350 {"default-config", 0x7d0000, 0x10000},
351 {"log", 0x7e0000, 0x10000},
352 {"radio", 0x7f0000, 0x10000},
356 .first_sysupgrade_partition
= "os-image",
357 .last_sysupgrade_partition
= "support-list",
360 /** Firmware layout for the CPE510 V2 */
363 .vendor
= "CPE510(TP-LINK|UN|N300-5):2.0\r\n",
366 "CPE510(TP-LINK|EU|N300-5|00000000):2.0\r\n"
367 "CPE510(TP-LINK|EU|N300-5|45550000):2.0\r\n"
368 "CPE510(TP-LINK|EU|N300-5|55530000):2.0\r\n"
369 "CPE510(TP-LINK|UN|N300-5|00000000):2.0\r\n"
370 "CPE510(TP-LINK|UN|N300-5|45550000):2.0\r\n"
371 "CPE510(TP-LINK|UN|N300-5|55530000):2.0\r\n"
372 "CPE510(TP-LINK|US|N300-5|00000000):2.0\r\n"
373 "CPE510(TP-LINK|US|N300-5|45550000):2.0\r\n"
374 "CPE510(TP-LINK|US|N300-5|55530000):2.0\r\n"
375 "CPE510(TP-LINK|UN|N300-5):2.0\r\n"
376 "CPE510(TP-LINK|EU|N300-5):2.0\r\n"
377 "CPE510(TP-LINK|US|N300-5):2.0\r\n",
378 .support_trail
= '\xff',
382 {"fs-uboot", 0x00000, 0x20000},
383 {"partition-table", 0x20000, 0x02000},
384 {"default-mac", 0x30000, 0x00020},
385 {"product-info", 0x31100, 0x00100},
386 {"signature", 0x32000, 0x00400},
387 {"os-image", 0x40000, 0x300000},
388 {"file-system", 0x340000, 0x470000},
389 {"soft-version", 0x7b0000, 0x00100},
390 {"support-list", 0x7b1000, 0x00400},
391 {"user-config", 0x7c0000, 0x10000},
392 {"default-config", 0x7d0000, 0x10000},
393 {"log", 0x7e0000, 0x10000},
394 {"radio", 0x7f0000, 0x10000},
398 .first_sysupgrade_partition
= "os-image",
399 .last_sysupgrade_partition
= "support-list",
402 /** Firmware layout for the CPE510 V3 */
405 .vendor
= "CPE510(TP-LINK|UN|N300-5):3.0\r\n",
408 "CPE510(TP-LINK|EU|N300-5|00000000):3.0\r\n"
409 "CPE510(TP-LINK|EU|N300-5|45550000):3.0\r\n"
410 "CPE510(TP-LINK|EU|N300-5|55530000):3.0\r\n"
411 "CPE510(TP-LINK|UN|N300-5|00000000):3.0\r\n"
412 "CPE510(TP-LINK|UN|N300-5|45550000):3.0\r\n"
413 "CPE510(TP-LINK|UN|N300-5|55530000):3.0\r\n"
414 "CPE510(TP-LINK|US|N300-5|00000000):3.0\r\n"
415 "CPE510(TP-LINK|US|N300-5|45550000):3.0\r\n"
416 "CPE510(TP-LINK|US|N300-5|55530000):3.0\r\n"
417 "CPE510(TP-LINK|UN|N300-5):3.0\r\n"
418 "CPE510(TP-LINK|EU|N300-5):3.0\r\n"
419 "CPE510(TP-LINK|US|N300-5):3.0\r\n",
420 .support_trail
= '\xff',
424 {"fs-uboot", 0x00000, 0x20000},
425 {"partition-table", 0x20000, 0x02000},
426 {"default-mac", 0x30000, 0x00020},
427 {"product-info", 0x31100, 0x00100},
428 {"signature", 0x32000, 0x00400},
429 {"os-image", 0x40000, 0x300000},
430 {"file-system", 0x340000, 0x470000},
431 {"soft-version", 0x7b0000, 0x00100},
432 {"support-list", 0x7b1000, 0x00400},
433 {"user-config", 0x7c0000, 0x10000},
434 {"default-config", 0x7d0000, 0x10000},
435 {"log", 0x7e0000, 0x10000},
436 {"radio", 0x7f0000, 0x10000},
440 .first_sysupgrade_partition
= "os-image",
441 .last_sysupgrade_partition
= "support-list",
444 /** Firmware layout for the CPE610V1 */
447 .vendor
= "CPE610(TP-LINK|UN|N300-5|00000000):1.0\r\n",
450 "CPE610(TP-LINK|EU|N300-5|00000000):1.0\r\n"
451 "CPE610(TP-LINK|EU|N300-5|45550000):1.0\r\n"
452 "CPE610(TP-LINK|EU|N300-5|55530000):1.0\r\n"
453 "CPE610(TP-LINK|UN|N300-5|00000000):1.0\r\n"
454 "CPE610(TP-LINK|UN|N300-5|45550000):1.0\r\n"
455 "CPE610(TP-LINK|UN|N300-5|55530000):1.0\r\n"
456 "CPE610(TP-LINK|US|N300-5|55530000):1.0\r\n"
457 "CPE610(TP-LINK|UN|N300-5):1.0\r\n"
458 "CPE610(TP-LINK|EU|N300-5):1.0\r\n"
459 "CPE610(TP-LINK|US|N300-5):1.0\r\n",
460 .support_trail
= '\xff',
464 {"fs-uboot", 0x00000, 0x20000},
465 {"partition-table", 0x20000, 0x02000},
466 {"default-mac", 0x30000, 0x00020},
467 {"product-info", 0x31100, 0x00100},
468 {"signature", 0x32000, 0x00400},
469 {"os-image", 0x40000, 0x300000},
470 {"file-system", 0x340000, 0x470000},
471 {"soft-version", 0x7b0000, 0x00100},
472 {"support-list", 0x7b1000, 0x00400},
473 {"user-config", 0x7c0000, 0x10000},
474 {"default-config", 0x7d0000, 0x10000},
475 {"log", 0x7e0000, 0x10000},
476 {"radio", 0x7f0000, 0x10000},
480 .first_sysupgrade_partition
= "os-image",
481 .last_sysupgrade_partition
= "support-list",
484 /** Firmware layout for the CPE610V2 */
487 .vendor
= "CPE610(TP-LINK|UN|N300-5|00000000):2.0\r\n",
490 "CPE610(TP-LINK|EU|N300-5|00000000):2.0\r\n"
491 "CPE610(TP-LINK|EU|N300-5|45550000):2.0\r\n"
492 "CPE610(TP-LINK|EU|N300-5|55530000):2.0\r\n"
493 "CPE610(TP-LINK|UN|N300-5|00000000):2.0\r\n"
494 "CPE610(TP-LINK|UN|N300-5|45550000):2.0\r\n"
495 "CPE610(TP-LINK|UN|N300-5|55530000):2.0\r\n"
496 "CPE610(TP-LINK|US|N300-5|55530000):2.0\r\n"
497 "CPE610(TP-LINK|UN|N300-5):2.0\r\n"
498 "CPE610(TP-LINK|EU|N300-5):2.0\r\n"
499 "CPE610(TP-LINK|US|N300-5):2.0\r\n",
500 .support_trail
= '\xff',
504 {"fs-uboot", 0x00000, 0x20000},
505 {"partition-table", 0x20000, 0x02000},
506 {"default-mac", 0x30000, 0x00020},
507 {"product-info", 0x31100, 0x00100},
508 {"signature", 0x32000, 0x00400},
509 {"os-image", 0x40000, 0x300000},
510 {"file-system", 0x340000, 0x470000},
511 {"soft-version", 0x7b0000, 0x00100},
512 {"support-list", 0x7b1000, 0x00400},
513 {"user-config", 0x7c0000, 0x10000},
514 {"default-config", 0x7d0000, 0x10000},
515 {"log", 0x7e0000, 0x10000},
516 {"radio", 0x7f0000, 0x10000},
520 .first_sysupgrade_partition
= "os-image",
521 .last_sysupgrade_partition
= "support-list",
526 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
529 "WBS210(TP-LINK|UN|N300-2):1.20\r\n"
530 "WBS210(TP-LINK|US|N300-2):1.20\r\n"
531 "WBS210(TP-LINK|EU|N300-2):1.20\r\n",
532 .support_trail
= '\xff',
536 {"fs-uboot", 0x00000, 0x20000},
537 {"partition-table", 0x20000, 0x02000},
538 {"default-mac", 0x30000, 0x00020},
539 {"product-info", 0x31100, 0x00100},
540 {"signature", 0x32000, 0x00400},
541 {"os-image", 0x40000, 0x300000},
542 {"file-system", 0x340000, 0x470000},
543 {"soft-version", 0x7b0000, 0x00100},
544 {"support-list", 0x7b1000, 0x00400},
545 {"user-config", 0x7c0000, 0x10000},
546 {"default-config", 0x7d0000, 0x10000},
547 {"log", 0x7e0000, 0x10000},
548 {"radio", 0x7f0000, 0x10000},
552 .first_sysupgrade_partition
= "os-image",
553 .last_sysupgrade_partition
= "support-list",
558 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
561 "WBS210(TP-LINK|UN|N300-2|00000000):2.0\r\n"
562 "WBS210(TP-LINK|US|N300-2|55530000):2.0\r\n"
563 "WBS210(TP-LINK|EU|N300-2|45550000):2.0\r\n",
564 .support_trail
= '\xff',
568 {"fs-uboot", 0x00000, 0x20000},
569 {"partition-table", 0x20000, 0x02000},
570 {"default-mac", 0x30000, 0x00020},
571 {"product-info", 0x31100, 0x00100},
572 {"signature", 0x32000, 0x00400},
573 {"os-image", 0x40000, 0x300000},
574 {"file-system", 0x340000, 0x470000},
575 {"soft-version", 0x7b0000, 0x00100},
576 {"support-list", 0x7b1000, 0x00400},
577 {"user-config", 0x7c0000, 0x10000},
578 {"default-config", 0x7d0000, 0x10000},
579 {"log", 0x7e0000, 0x10000},
580 {"radio", 0x7f0000, 0x10000},
584 .first_sysupgrade_partition
= "os-image",
585 .last_sysupgrade_partition
= "support-list",
590 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
593 "WBS510(TP-LINK|UN|N300-5):1.20\r\n"
594 "WBS510(TP-LINK|US|N300-5):1.20\r\n"
595 "WBS510(TP-LINK|EU|N300-5):1.20\r\n"
596 "WBS510(TP-LINK|CA|N300-5):1.20\r\n",
597 .support_trail
= '\xff',
601 {"fs-uboot", 0x00000, 0x20000},
602 {"partition-table", 0x20000, 0x02000},
603 {"default-mac", 0x30000, 0x00020},
604 {"product-info", 0x31100, 0x00100},
605 {"signature", 0x32000, 0x00400},
606 {"os-image", 0x40000, 0x300000},
607 {"file-system", 0x340000, 0x470000},
608 {"soft-version", 0x7b0000, 0x00100},
609 {"support-list", 0x7b1000, 0x00400},
610 {"user-config", 0x7c0000, 0x10000},
611 {"default-config", 0x7d0000, 0x10000},
612 {"log", 0x7e0000, 0x10000},
613 {"radio", 0x7f0000, 0x10000},
617 .first_sysupgrade_partition
= "os-image",
618 .last_sysupgrade_partition
= "support-list",
623 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
626 "WBS510(TP-LINK|UN|N300-5|00000000):2.0\r\n"
627 "WBS510(TP-LINK|US|N300-5|55530000):2.0\r\n"
628 "WBS510(TP-LINK|EU|N300-5|45550000):2.0\r\n"
629 "WBS510(TP-LINK|CA|N300-5|43410000):2.0\r\n",
630 .support_trail
= '\xff',
634 {"fs-uboot", 0x00000, 0x20000},
635 {"partition-table", 0x20000, 0x02000},
636 {"default-mac", 0x30000, 0x00020},
637 {"product-info", 0x31100, 0x00100},
638 {"signature", 0x32000, 0x00400},
639 {"os-image", 0x40000, 0x300000},
640 {"file-system", 0x340000, 0x470000},
641 {"soft-version", 0x7b0000, 0x00100},
642 {"support-list", 0x7b1000, 0x00400},
643 {"user-config", 0x7c0000, 0x10000},
644 {"default-config", 0x7d0000, 0x10000},
645 {"log", 0x7e0000, 0x10000},
646 {"radio", 0x7f0000, 0x10000},
650 .first_sysupgrade_partition
= "os-image",
651 .last_sysupgrade_partition
= "support-list",
654 /** Firmware layout for the C2600 */
660 "{product_name:Archer C2600,product_ver:1.0.0,special_id:00000000}\r\n",
661 .support_trail
= '\x00',
665 We use a bigger os-image partition than the stock images (and thus
666 smaller file-system), as our kernel doesn't fit in the stock firmware's
667 2 MB os-image since kernel 4.14.
670 {"SBL1", 0x00000, 0x20000},
671 {"MIBIB", 0x20000, 0x20000},
672 {"SBL2", 0x40000, 0x20000},
673 {"SBL3", 0x60000, 0x30000},
674 {"DDRCONFIG", 0x90000, 0x10000},
675 {"SSD", 0xa0000, 0x10000},
676 {"TZ", 0xb0000, 0x30000},
677 {"RPM", 0xe0000, 0x20000},
678 {"fs-uboot", 0x100000, 0x70000},
679 {"uboot-env", 0x170000, 0x40000},
680 {"radio", 0x1b0000, 0x40000},
681 {"os-image", 0x1f0000, 0x400000}, /* Stock: base 0x1f0000 size 0x200000 */
682 {"file-system", 0x5f0000, 0x1900000}, /* Stock: base 0x3f0000 size 0x1b00000 */
683 {"default-mac", 0x1ef0000, 0x00200},
684 {"pin", 0x1ef0200, 0x00200},
685 {"product-info", 0x1ef0400, 0x0fc00},
686 {"partition-table", 0x1f00000, 0x10000},
687 {"soft-version", 0x1f10000, 0x10000},
688 {"support-list", 0x1f20000, 0x10000},
689 {"profile", 0x1f30000, 0x10000},
690 {"default-config", 0x1f40000, 0x10000},
691 {"user-config", 0x1f50000, 0x40000},
692 {"qos-db", 0x1f90000, 0x40000},
693 {"usb-config", 0x1fd0000, 0x10000},
694 {"log", 0x1fe0000, 0x20000},
698 .first_sysupgrade_partition
= "os-image",
699 .last_sysupgrade_partition
= "file-system"
702 /** Firmware layout for the A7-V5 */
704 .id
= "ARCHER-A7-V5",
707 "{product_name:Archer A7,product_ver:5.0.0,special_id:45550000}\n"
708 "{product_name:Archer A7,product_ver:5.0.0,special_id:55530000}\n"
709 "{product_name:Archer A7,product_ver:5.0.0,special_id:43410000}\n"
710 "{product_name:Archer A7,product_ver:5.0.0,special_id:4A500000}\n"
711 "{product_name:Archer A7,product_ver:5.0.0,special_id:54570000}\n",
712 .support_trail
= '\x00',
713 .soft_ver
= "soft_ver:1.0.0\n",
715 /* We're using a dynamic kernel/rootfs split here */
717 {"factory-boot", 0x00000, 0x20000},
718 {"fs-uboot", 0x20000, 0x20000},
719 {"firmware", 0x40000, 0xec0000}, /* Stock: name os-image base 0x40000 size 0x120000 */
720 /* Stock: name file-system base 0x160000 size 0xda0000 */
721 {"default-mac", 0xf40000, 0x00200},
722 {"pin", 0xf40200, 0x00200},
723 {"device-id", 0xf40400, 0x00100},
724 {"product-info", 0xf40500, 0x0fb00},
725 {"soft-version", 0xf50000, 0x00100},
726 {"extra-para", 0xf51000, 0x01000},
727 {"support-list", 0xf52000, 0x0a000},
728 {"profile", 0xf5c000, 0x04000},
729 {"default-config", 0xf60000, 0x10000},
730 {"user-config", 0xf70000, 0x40000},
731 {"certificate", 0xfb0000, 0x10000},
732 {"partition-table", 0xfc0000, 0x10000},
733 {"log", 0xfd0000, 0x20000},
734 {"radio", 0xff0000, 0x10000},
738 .first_sysupgrade_partition
= "os-image",
739 .last_sysupgrade_partition
= "file-system",
742 /** Firmware layout for the C2v3 */
744 .id
= "ARCHER-C2-V3",
747 "{product_name:ArcherC2,product_ver:3.0.0,special_id:00000000}\n"
748 "{product_name:ArcherC2,product_ver:3.0.0,special_id:55530000}\n"
749 "{product_name:ArcherC2,product_ver:3.0.0,special_id:45550000}\n",
750 .support_trail
= '\x00',
751 .soft_ver
= "soft_ver:3.0.1\n",
753 /** We're using a dynamic kernel/rootfs split here */
756 {"factory-boot", 0x00000, 0x20000},
757 {"fs-uboot", 0x20000, 0x10000},
758 {"firmware", 0x30000, 0x7a0000},
759 {"user-config", 0x7d0000, 0x04000},
760 {"default-mac", 0x7e0000, 0x00100},
761 {"device-id", 0x7e0100, 0x00100},
762 {"extra-para", 0x7e0200, 0x00100},
763 {"pin", 0x7e0300, 0x00100},
764 {"support-list", 0x7e0400, 0x00400},
765 {"soft-version", 0x7e0800, 0x00400},
766 {"product-info", 0x7e0c00, 0x01400},
767 {"partition-table", 0x7e2000, 0x01000},
768 {"profile", 0x7e3000, 0x01000},
769 {"default-config", 0x7e4000, 0x04000},
770 {"merge-config", 0x7ec000, 0x02000},
771 {"qos-db", 0x7ee000, 0x02000},
772 {"radio", 0x7f0000, 0x10000},
776 .first_sysupgrade_partition
= "os-image",
777 .last_sysupgrade_partition
= "file-system",
780 /** Firmware layout for the C25v1 */
782 .id
= "ARCHER-C25-V1",
785 "{product_name:ArcherC25,product_ver:1.0.0,special_id:00000000}\n"
786 "{product_name:ArcherC25,product_ver:1.0.0,special_id:55530000}\n"
787 "{product_name:ArcherC25,product_ver:1.0.0,special_id:45550000}\n",
788 .support_trail
= '\x00',
789 .soft_ver
= "soft_ver:1.0.0\n",
791 /* We're using a dynamic kernel/rootfs split here */
793 {"factory-boot", 0x00000, 0x20000},
794 {"fs-uboot", 0x20000, 0x10000},
795 {"firmware", 0x30000, 0x7a0000}, /* Stock: name os-image base 0x30000 size 0x100000 */
796 /* Stock: name file-system base 0x130000 size 0x6a0000 */
797 {"user-config", 0x7d0000, 0x04000},
798 {"default-mac", 0x7e0000, 0x00100},
799 {"device-id", 0x7e0100, 0x00100},
800 {"extra-para", 0x7e0200, 0x00100},
801 {"pin", 0x7e0300, 0x00100},
802 {"support-list", 0x7e0400, 0x00400},
803 {"soft-version", 0x7e0800, 0x00400},
804 {"product-info", 0x7e0c00, 0x01400},
805 {"partition-table", 0x7e2000, 0x01000},
806 {"profile", 0x7e3000, 0x01000},
807 {"default-config", 0x7e4000, 0x04000},
808 {"merge-config", 0x7ec000, 0x02000},
809 {"qos-db", 0x7ee000, 0x02000},
810 {"radio", 0x7f0000, 0x10000},
814 .first_sysupgrade_partition
= "os-image",
815 .last_sysupgrade_partition
= "file-system",
818 /** Firmware layout for the C58v1 */
820 .id
= "ARCHER-C58-V1",
824 "{product_name:Archer C58,product_ver:1.0.0,special_id:00000000}\r\n"
825 "{product_name:Archer C58,product_ver:1.0.0,special_id:45550000}\r\n"
826 "{product_name:Archer C58,product_ver:1.0.0,special_id:55530000}\r\n",
827 .support_trail
= '\x00',
828 .soft_ver
= "soft_ver:1.0.0\n",
831 {"fs-uboot", 0x00000, 0x10000},
832 {"default-mac", 0x10000, 0x00200},
833 {"pin", 0x10200, 0x00200},
834 {"product-info", 0x10400, 0x00100},
835 {"partition-table", 0x10500, 0x00800},
836 {"soft-version", 0x11300, 0x00200},
837 {"support-list", 0x11500, 0x00100},
838 {"device-id", 0x11600, 0x00100},
839 {"profile", 0x11700, 0x03900},
840 {"default-config", 0x15000, 0x04000},
841 {"user-config", 0x19000, 0x04000},
842 {"firmware", 0x20000, 0x7c8000},
843 {"certyficate", 0x7e8000, 0x08000},
844 {"radio", 0x7f0000, 0x10000},
848 .first_sysupgrade_partition
= "os-image",
849 .last_sysupgrade_partition
= "file-system",
852 /** Firmware layout for the C59v1 */
854 .id
= "ARCHER-C59-V1",
858 "{product_name:Archer C59,product_ver:1.0.0,special_id:00000000}\r\n"
859 "{product_name:Archer C59,product_ver:1.0.0,special_id:45550000}\r\n"
860 "{product_name:Archer C59,product_ver:1.0.0,special_id:52550000}\r\n"
861 "{product_name:Archer C59,product_ver:1.0.0,special_id:55530000}\r\n",
862 .support_trail
= '\x00',
863 .soft_ver
= "soft_ver:1.0.0\n",
865 /* We're using a dynamic kernel/rootfs split here */
867 {"fs-uboot", 0x00000, 0x10000},
868 {"default-mac", 0x10000, 0x00200},
869 {"pin", 0x10200, 0x00200},
870 {"device-id", 0x10400, 0x00100},
871 {"product-info", 0x10500, 0x0fb00},
872 {"firmware", 0x20000, 0xe30000},
873 {"partition-table", 0xe50000, 0x10000},
874 {"soft-version", 0xe60000, 0x10000},
875 {"support-list", 0xe70000, 0x10000},
876 {"profile", 0xe80000, 0x10000},
877 {"default-config", 0xe90000, 0x10000},
878 {"user-config", 0xea0000, 0x40000},
879 {"usb-config", 0xee0000, 0x10000},
880 {"certificate", 0xef0000, 0x10000},
881 {"qos-db", 0xf00000, 0x40000},
882 {"log", 0xfe0000, 0x10000},
883 {"radio", 0xff0000, 0x10000},
887 .first_sysupgrade_partition
= "os-image",
888 .last_sysupgrade_partition
= "file-system",
891 /** Firmware layout for the C59v2 */
893 .id
= "ARCHER-C59-V2",
897 "{product_name:Archer C59,product_ver:2.0.0,special_id:00000000}\r\n"
898 "{product_name:Archer C59,product_ver:2.0.0,special_id:45550000}\r\n"
899 "{product_name:Archer C59,product_ver:2.0.0,special_id:55530000}\r\n",
900 .support_trail
= '\x00',
901 .soft_ver
= "soft_ver:2.0.0 Build 20161206 rel.7303\n",
903 /** We're using a dynamic kernel/rootfs split here */
905 {"factory-boot", 0x00000, 0x20000},
906 {"fs-uboot", 0x20000, 0x10000},
907 {"default-mac", 0x30000, 0x00200},
908 {"pin", 0x30200, 0x00200},
909 {"device-id", 0x30400, 0x00100},
910 {"product-info", 0x30500, 0x0fb00},
911 {"firmware", 0x40000, 0xe10000},
912 {"partition-table", 0xe50000, 0x10000},
913 {"soft-version", 0xe60000, 0x10000},
914 {"support-list", 0xe70000, 0x10000},
915 {"profile", 0xe80000, 0x10000},
916 {"default-config", 0xe90000, 0x10000},
917 {"user-config", 0xea0000, 0x40000},
918 {"usb-config", 0xee0000, 0x10000},
919 {"certificate", 0xef0000, 0x10000},
920 {"extra-para", 0xf00000, 0x10000},
921 {"qos-db", 0xf10000, 0x30000},
922 {"log", 0xfe0000, 0x10000},
923 {"radio", 0xff0000, 0x10000},
927 .first_sysupgrade_partition
= "os-image",
928 .last_sysupgrade_partition
= "file-system",
931 /** Firmware layout for the Archer C6 v2 (EU/RU/JP) */
933 .id
= "ARCHER-C6-V2",
937 "{product_name:Archer C6,product_ver:2.0.0,special_id:45550000}\r\n"
938 "{product_name:Archer C6,product_ver:2.0.0,special_id:52550000}\r\n"
939 "{product_name:Archer C6,product_ver:2.0.0,special_id:4A500000}\r\n",
940 .support_trail
= '\x00',
941 .soft_ver
= "soft_ver:1.9.1\n",
944 {"fs-uboot", 0x00000, 0x20000},
945 {"default-mac", 0x20000, 0x00200},
946 {"pin", 0x20200, 0x00100},
947 {"product-info", 0x20300, 0x00200},
948 {"device-id", 0x20500, 0x0fb00},
949 {"firmware", 0x30000, 0x7a9400},
950 {"soft-version", 0x7d9400, 0x00100},
951 {"extra-para", 0x7d9500, 0x00100},
952 {"support-list", 0x7d9600, 0x00200},
953 {"profile", 0x7d9800, 0x03000},
954 {"default-config", 0x7dc800, 0x03000},
955 {"partition-table", 0x7df800, 0x00800},
956 {"user-config", 0x7e0000, 0x0c000},
957 {"certificate", 0x7ec000, 0x04000},
958 {"radio", 0x7f0000, 0x10000},
962 .first_sysupgrade_partition
= "os-image",
963 .last_sysupgrade_partition
= "file-system",
966 /** Firmware layout for the Archer C6 v2 (US) and A6 v2 (US/TW) */
968 .id
= "ARCHER-C6-V2-US",
972 "{product_name:Archer A6,product_ver:2.0.0,special_id:55530000}\n"
973 "{product_name:Archer A6,product_ver:2.0.0,special_id:54570000}\n"
974 "{product_name:Archer C6,product_ver:2.0.0,special_id:55530000}\n",
975 .support_trail
= '\x00',
976 .soft_ver
= "soft_ver:1.9.1\n",
979 {"factory-boot", 0x00000, 0x20000},
980 {"default-mac", 0x20000, 0x00200},
981 {"pin", 0x20200, 0x00100},
982 {"product-info", 0x20300, 0x00200},
983 {"device-id", 0x20500, 0x0fb00},
984 {"fs-uboot", 0x30000, 0x20000},
985 {"firmware", 0x50000, 0xf89400},
986 {"soft-version", 0xfd9400, 0x00100},
987 {"extra-para", 0xfd9500, 0x00100},
988 {"support-list", 0xfd9600, 0x00200},
989 {"profile", 0xfd9800, 0x03000},
990 {"default-config", 0xfdc800, 0x03000},
991 {"partition-table", 0xfdf800, 0x00800},
992 {"user-config", 0xfe0000, 0x0c000},
993 {"certificate", 0xfec000, 0x04000},
994 {"radio", 0xff0000, 0x10000},
997 .first_sysupgrade_partition
= "os-image",
998 .last_sysupgrade_partition
= "file-system",
1001 /** Firmware layout for the C60v1 */
1003 .id
= "ARCHER-C60-V1",
1007 "{product_name:Archer C60,product_ver:1.0.0,special_id:00000000}\r\n"
1008 "{product_name:Archer C60,product_ver:1.0.0,special_id:45550000}\r\n"
1009 "{product_name:Archer C60,product_ver:1.0.0,special_id:55530000}\r\n",
1010 .support_trail
= '\x00',
1011 .soft_ver
= "soft_ver:1.0.0\n",
1014 {"fs-uboot", 0x00000, 0x10000},
1015 {"default-mac", 0x10000, 0x00200},
1016 {"pin", 0x10200, 0x00200},
1017 {"product-info", 0x10400, 0x00100},
1018 {"partition-table", 0x10500, 0x00800},
1019 {"soft-version", 0x11300, 0x00200},
1020 {"support-list", 0x11500, 0x00100},
1021 {"device-id", 0x11600, 0x00100},
1022 {"profile", 0x11700, 0x03900},
1023 {"default-config", 0x15000, 0x04000},
1024 {"user-config", 0x19000, 0x04000},
1025 {"firmware", 0x20000, 0x7c8000},
1026 {"certyficate", 0x7e8000, 0x08000},
1027 {"radio", 0x7f0000, 0x10000},
1031 .first_sysupgrade_partition
= "os-image",
1032 .last_sysupgrade_partition
= "file-system",
1035 /** Firmware layout for the C60v2 */
1037 .id
= "ARCHER-C60-V2",
1041 "{product_name:Archer C60,product_ver:2.0.0,special_id:42520000}\r\n"
1042 "{product_name:Archer C60,product_ver:2.0.0,special_id:45550000}\r\n"
1043 "{product_name:Archer C60,product_ver:2.0.0,special_id:55530000}\r\n",
1044 .support_trail
= '\x00',
1045 .soft_ver
= "soft_ver:2.0.0\n",
1048 {"factory-boot", 0x00000, 0x1fb00},
1049 {"default-mac", 0x1fb00, 0x00200},
1050 {"pin", 0x1fd00, 0x00100},
1051 {"product-info", 0x1fe00, 0x00100},
1052 {"device-id", 0x1ff00, 0x00100},
1053 {"fs-uboot", 0x20000, 0x10000},
1054 {"firmware", 0x30000, 0x7a0000},
1055 {"soft-version", 0x7d9500, 0x00100},
1056 {"support-list", 0x7d9600, 0x00100},
1057 {"extra-para", 0x7d9700, 0x00100},
1058 {"profile", 0x7d9800, 0x03000},
1059 {"default-config", 0x7dc800, 0x03000},
1060 {"partition-table", 0x7df800, 0x00800},
1061 {"user-config", 0x7e0000, 0x0c000},
1062 {"certificate", 0x7ec000, 0x04000},
1063 {"radio", 0x7f0000, 0x10000},
1067 .first_sysupgrade_partition
= "os-image",
1068 .last_sysupgrade_partition
= "file-system",
1071 /** Firmware layout for the C60v3 */
1073 .id
= "ARCHER-C60-V3",
1077 "{product_name:Archer C60,product_ver:3.0.0,special_id:42520000}\r\n"
1078 "{product_name:Archer C60,product_ver:3.0.0,special_id:45550000}\r\n"
1079 "{product_name:Archer C60,product_ver:3.0.0,special_id:55530000}\r\n",
1080 .support_trail
= '\x00',
1081 .soft_ver
= "soft_ver:3.0.0\n",
1084 {"factory-boot", 0x00000, 0x1fb00},
1085 {"default-mac", 0x1fb00, 0x00200},
1086 {"pin", 0x1fd00, 0x00100},
1087 {"product-info", 0x1fe00, 0x00100},
1088 {"device-id", 0x1ff00, 0x00100},
1089 {"fs-uboot", 0x20000, 0x10000},
1090 {"firmware", 0x30000, 0x7a0000},
1091 {"soft-version", 0x7d9500, 0x00100},
1092 {"support-list", 0x7d9600, 0x00100},
1093 {"extra-para", 0x7d9700, 0x00100},
1094 {"profile", 0x7d9800, 0x03000},
1095 {"default-config", 0x7dc800, 0x03000},
1096 {"partition-table", 0x7df800, 0x00800},
1097 {"user-config", 0x7e0000, 0x0c000},
1098 {"certificate", 0x7ec000, 0x04000},
1099 {"radio", 0x7f0000, 0x10000},
1103 .first_sysupgrade_partition
= "os-image",
1104 .last_sysupgrade_partition
= "file-system",
1107 /** Firmware layout for the C5 */
1109 .id
= "ARCHER-C5-V2",
1113 "{product_name:ArcherC5,product_ver:2.0.0,special_id:00000000}\r\n"
1114 "{product_name:ArcherC5,product_ver:2.0.0,special_id:55530000}\r\n"
1115 "{product_name:ArcherC5,product_ver:2.0.0,special_id:4A500000}\r\n", /* JP version */
1116 .support_trail
= '\x00',
1120 {"fs-uboot", 0x00000, 0x40000},
1121 {"os-image", 0x40000, 0x200000},
1122 {"file-system", 0x240000, 0xc00000},
1123 {"default-mac", 0xe40000, 0x00200},
1124 {"pin", 0xe40200, 0x00200},
1125 {"product-info", 0xe40400, 0x00200},
1126 {"partition-table", 0xe50000, 0x10000},
1127 {"soft-version", 0xe60000, 0x00200},
1128 {"support-list", 0xe61000, 0x0f000},
1129 {"profile", 0xe70000, 0x10000},
1130 {"default-config", 0xe80000, 0x10000},
1131 {"user-config", 0xe90000, 0x50000},
1132 {"log", 0xee0000, 0x100000},
1133 {"radio_bk", 0xfe0000, 0x10000},
1134 {"radio", 0xff0000, 0x10000},
1138 .first_sysupgrade_partition
= "os-image",
1139 .last_sysupgrade_partition
= "file-system"
1142 /** Firmware layout for the C7 */
1144 .id
= "ARCHER-C7-V4",
1147 "{product_name:Archer C7,product_ver:4.0.0,special_id:00000000}\n"
1148 "{product_name:Archer C7,product_ver:4.0.0,special_id:41550000}\n"
1149 "{product_name:Archer C7,product_ver:4.0.0,special_id:45550000}\n"
1150 "{product_name:Archer C7,product_ver:4.0.0,special_id:4B520000}\n"
1151 "{product_name:Archer C7,product_ver:4.0.0,special_id:42520000}\n"
1152 "{product_name:Archer C7,product_ver:4.0.0,special_id:4A500000}\n"
1153 "{product_name:Archer C7,product_ver:4.0.0,special_id:52550000}\n"
1154 "{product_name:Archer C7,product_ver:4.0.0,special_id:54570000}\n"
1155 "{product_name:Archer C7,product_ver:4.0.0,special_id:55530000}\n"
1156 "{product_name:Archer C7,product_ver:4.0.0,special_id:43410000}\n",
1157 .support_trail
= '\x00',
1158 .soft_ver
= "soft_ver:1.0.0\n",
1160 /* We're using a dynamic kernel/rootfs split here */
1162 {"factory-boot", 0x00000, 0x20000},
1163 {"fs-uboot", 0x20000, 0x20000},
1164 {"firmware", 0x40000, 0xEC0000}, /* Stock: name os-image base 0x40000 size 0x120000 */
1165 /* Stock: name file-system base 0x160000 size 0xda0000 */
1166 {"default-mac", 0xf00000, 0x00200},
1167 {"pin", 0xf00200, 0x00200},
1168 {"device-id", 0xf00400, 0x00100},
1169 {"product-info", 0xf00500, 0x0fb00},
1170 {"soft-version", 0xf10000, 0x00100},
1171 {"extra-para", 0xf11000, 0x01000},
1172 {"support-list", 0xf12000, 0x0a000},
1173 {"profile", 0xf1c000, 0x04000},
1174 {"default-config", 0xf20000, 0x10000},
1175 {"user-config", 0xf30000, 0x40000},
1176 {"qos-db", 0xf70000, 0x40000},
1177 {"certificate", 0xfb0000, 0x10000},
1178 {"partition-table", 0xfc0000, 0x10000},
1179 {"log", 0xfd0000, 0x20000},
1180 {"radio", 0xff0000, 0x10000},
1184 .first_sysupgrade_partition
= "os-image",
1185 .last_sysupgrade_partition
= "file-system",
1188 /** Firmware layout for the C7 v5*/
1190 .id
= "ARCHER-C7-V5",
1193 "{product_name:Archer C7,product_ver:5.0.0,special_id:00000000}\n"
1194 "{product_name:Archer C7,product_ver:5.0.0,special_id:45550000}\n"
1195 "{product_name:Archer C7,product_ver:5.0.0,special_id:55530000}\n"
1196 "{product_name:Archer C7,product_ver:5.0.0,special_id:43410000}\n"
1197 "{product_name:Archer C7,product_ver:5.0.0,special_id:4A500000}\n"
1198 "{product_name:Archer C7,product_ver:5.0.0,special_id:54570000}\n"
1199 "{product_name:Archer C7,product_ver:5.0.0,special_id:52550000}\n"
1200 "{product_name:Archer C7,product_ver:5.0.0,special_id:4B520000}\n",
1202 .support_trail
= '\x00',
1203 .soft_ver
= "soft_ver:1.0.0\n",
1205 /* We're using a dynamic kernel/rootfs split here */
1207 {"factory-boot", 0x00000, 0x20000},
1208 {"fs-uboot", 0x20000, 0x20000},
1209 {"partition-table", 0x40000, 0x10000},
1210 {"radio", 0x50000, 0x10000},
1211 {"default-mac", 0x60000, 0x00200},
1212 {"pin", 0x60200, 0x00200},
1213 {"device-id", 0x60400, 0x00100},
1214 {"product-info", 0x60500, 0x0fb00},
1215 {"soft-version", 0x70000, 0x01000},
1216 {"extra-para", 0x71000, 0x01000},
1217 {"support-list", 0x72000, 0x0a000},
1218 {"profile", 0x7c000, 0x04000},
1219 {"user-config", 0x80000, 0x40000},
1222 {"firmware", 0xc0000, 0xf00000}, /* Stock: name os-image base 0xc0000 size 0x120000 */
1223 /* Stock: name file-system base 0x1e0000 size 0xde0000 */
1225 {"log", 0xfc0000, 0x20000},
1226 {"certificate", 0xfe0000, 0x10000},
1227 {"default-config", 0xff0000, 0x10000},
1232 .first_sysupgrade_partition
= "os-image",
1233 .last_sysupgrade_partition
= "file-system",
1236 /** Firmware layout for the C9 */
1242 "{product_name:ArcherC9,"
1243 "product_ver:1.0.0,"
1244 "special_id:00000000}\n",
1245 .support_trail
= '\x00',
1249 {"fs-uboot", 0x00000, 0x40000},
1250 {"os-image", 0x40000, 0x200000},
1251 {"file-system", 0x240000, 0xc00000},
1252 {"default-mac", 0xe40000, 0x00200},
1253 {"pin", 0xe40200, 0x00200},
1254 {"product-info", 0xe40400, 0x00200},
1255 {"partition-table", 0xe50000, 0x10000},
1256 {"soft-version", 0xe60000, 0x00200},
1257 {"support-list", 0xe61000, 0x0f000},
1258 {"profile", 0xe70000, 0x10000},
1259 {"default-config", 0xe80000, 0x10000},
1260 {"user-config", 0xe90000, 0x50000},
1261 {"log", 0xee0000, 0x100000},
1262 {"radio_bk", 0xfe0000, 0x10000},
1263 {"radio", 0xff0000, 0x10000},
1267 .first_sysupgrade_partition
= "os-image",
1268 .last_sysupgrade_partition
= "file-system"
1271 /** Firmware layout for the EAP120 */
1274 .vendor
= "EAP120(TP-LINK|UN|N300-2):1.0\r\n",
1277 "EAP120(TP-LINK|UN|N300-2):1.0\r\n",
1278 .support_trail
= '\xff',
1282 {"fs-uboot", 0x00000, 0x20000},
1283 {"partition-table", 0x20000, 0x02000},
1284 {"default-mac", 0x30000, 0x00020},
1285 {"support-list", 0x31000, 0x00100},
1286 {"product-info", 0x31100, 0x00100},
1287 {"soft-version", 0x32000, 0x00100},
1288 {"os-image", 0x40000, 0x180000},
1289 {"file-system", 0x1c0000, 0x600000},
1290 {"user-config", 0x7c0000, 0x10000},
1291 {"backup-config", 0x7d0000, 0x10000},
1292 {"log", 0x7e0000, 0x10000},
1293 {"radio", 0x7f0000, 0x10000},
1297 .first_sysupgrade_partition
= "os-image",
1298 .last_sysupgrade_partition
= "file-system"
1301 /** Firmware layout for the TL-WA850RE v2 */
1303 .id
= "TLWA850REV2",
1307 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:55530000}\n"
1308 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:00000000}\n"
1309 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:55534100}\n"
1310 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:45550000}\n"
1311 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:4B520000}\n"
1312 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:42520000}\n"
1313 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:4A500000}\n"
1314 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:43410000}\n"
1315 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:41550000}\n"
1316 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:52550000}\n",
1317 .support_trail
= '\x00',
1321 576KB were moved from file-system to os-image
1322 in comparison to the stock image
1325 {"fs-uboot", 0x00000, 0x20000},
1326 {"firmware", 0x20000, 0x390000},
1327 {"partition-table", 0x3b0000, 0x02000},
1328 {"default-mac", 0x3c0000, 0x00020},
1329 {"pin", 0x3c0100, 0x00020},
1330 {"product-info", 0x3c1000, 0x01000},
1331 {"soft-version", 0x3c2000, 0x00100},
1332 {"support-list", 0x3c3000, 0x01000},
1333 {"profile", 0x3c4000, 0x08000},
1334 {"user-config", 0x3d0000, 0x10000},
1335 {"default-config", 0x3e0000, 0x10000},
1336 {"radio", 0x3f0000, 0x10000},
1340 .first_sysupgrade_partition
= "os-image",
1341 .last_sysupgrade_partition
= "file-system"
1344 /** Firmware layout for the TL-WA855RE v1 */
1346 .id
= "TLWA855REV1",
1350 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:00000000}\n"
1351 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:55530000}\n"
1352 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:45550000}\n"
1353 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:4B520000}\n"
1354 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:42520000}\n"
1355 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:4A500000}\n"
1356 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:43410000}\n"
1357 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:41550000}\n"
1358 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:52550000}\n",
1359 .support_trail
= '\x00',
1363 {"fs-uboot", 0x00000, 0x20000},
1364 {"os-image", 0x20000, 0x150000},
1365 {"file-system", 0x170000, 0x240000},
1366 {"partition-table", 0x3b0000, 0x02000},
1367 {"default-mac", 0x3c0000, 0x00020},
1368 {"pin", 0x3c0100, 0x00020},
1369 {"product-info", 0x3c1000, 0x01000},
1370 {"soft-version", 0x3c2000, 0x00100},
1371 {"support-list", 0x3c3000, 0x01000},
1372 {"profile", 0x3c4000, 0x08000},
1373 {"user-config", 0x3d0000, 0x10000},
1374 {"default-config", 0x3e0000, 0x10000},
1375 {"radio", 0x3f0000, 0x10000},
1379 .first_sysupgrade_partition
= "os-image",
1380 .last_sysupgrade_partition
= "file-system"
1383 /** Firmware layout for the TL-WPA8630P v2 (EU)*/
1385 .id
= "TL-WPA8630P-V2-EU",
1389 "{product_name:TL-WPA8630P,product_ver:2.0.0,special_id:45550000}\n",
1390 .support_trail
= '\x00',
1394 {"factory-uboot", 0x00000, 0x20000},
1395 {"fs-uboot", 0x20000, 0x20000},
1396 {"firmware", 0x40000, 0x5e0000},
1397 {"partition-table", 0x620000, 0x02000},
1398 {"default-mac", 0x630000, 0x00020},
1399 {"pin", 0x630100, 0x00020},
1400 {"device-id", 0x630200, 0x00030},
1401 {"product-info", 0x631100, 0x01000},
1402 {"extra-para", 0x632100, 0x01000},
1403 {"soft-version", 0x640000, 0x01000},
1404 {"support-list", 0x641000, 0x01000},
1405 {"profile", 0x642000, 0x08000},
1406 {"user-config", 0x650000, 0x10000},
1407 {"default-config", 0x660000, 0x10000},
1408 {"default-nvm", 0x670000, 0xc0000},
1409 {"default-pib", 0x730000, 0x40000},
1410 {"radio", 0x7f0000, 0x10000},
1414 .first_sysupgrade_partition
= "os-image",
1415 .last_sysupgrade_partition
= "file-system"
1418 /** Firmware layout for the TL-WPA8630P v2 (INT)*/
1420 .id
= "TL-WPA8630P-V2-INT",
1424 "{product_name:TL-WPA8630P,product_ver:2.0.0,special_id:41550000}\n"
1425 "{product_name:TL-WPA8630P,product_ver:2.0.0,special_id:44450000}\n"
1426 "{product_name:TL-WPA8630P,product_ver:2.1.0,special_id:41550000}\n",
1427 .support_trail
= '\x00',
1431 {"factory-uboot", 0x00000, 0x20000},
1432 {"fs-uboot", 0x20000, 0x20000},
1433 {"firmware", 0x40000, 0x5e0000},
1434 {"partition-table", 0x620000, 0x02000},
1435 {"extra-para", 0x632100, 0x01000},
1436 {"soft-version", 0x640000, 0x01000},
1437 {"support-list", 0x641000, 0x01000},
1438 {"profile", 0x642000, 0x08000},
1439 {"user-config", 0x650000, 0x10000},
1440 {"default-config", 0x660000, 0x10000},
1441 {"default-nvm", 0x670000, 0xc0000},
1442 {"default-pib", 0x730000, 0x40000},
1443 {"default-mac", 0x7e0000, 0x00020},
1444 {"pin", 0x7e0100, 0x00020},
1445 {"device-id", 0x7e0200, 0x00030},
1446 {"product-info", 0x7e1100, 0x01000},
1447 {"radio", 0x7f0000, 0x10000},
1451 .first_sysupgrade_partition
= "os-image",
1452 .last_sysupgrade_partition
= "file-system"
1455 /** Firmware layout for the TL-WR1043 v5 */
1457 .id
= "TLWR1043NV5",
1461 "{product_name:TL-WR1043N,product_ver:5.0.0,special_id:45550000}\n"
1462 "{product_name:TL-WR1043N,product_ver:5.0.0,special_id:55530000}\n",
1463 .support_trail
= '\x00',
1464 .soft_ver
= "soft_ver:1.0.0\n",
1466 {"factory-boot", 0x00000, 0x20000},
1467 {"fs-uboot", 0x20000, 0x20000},
1468 {"firmware", 0x40000, 0xec0000},
1469 {"default-mac", 0xf00000, 0x00200},
1470 {"pin", 0xf00200, 0x00200},
1471 {"device-id", 0xf00400, 0x00100},
1472 {"product-info", 0xf00500, 0x0fb00},
1473 {"soft-version", 0xf10000, 0x01000},
1474 {"extra-para", 0xf11000, 0x01000},
1475 {"support-list", 0xf12000, 0x0a000},
1476 {"profile", 0xf1c000, 0x04000},
1477 {"default-config", 0xf20000, 0x10000},
1478 {"user-config", 0xf30000, 0x40000},
1479 {"qos-db", 0xf70000, 0x40000},
1480 {"certificate", 0xfb0000, 0x10000},
1481 {"partition-table", 0xfc0000, 0x10000},
1482 {"log", 0xfd0000, 0x20000},
1483 {"radio", 0xff0000, 0x10000},
1486 .first_sysupgrade_partition
= "os-image",
1487 .last_sysupgrade_partition
= "file-system"
1490 /** Firmware layout for the TL-WR1043 v4 */
1492 .id
= "TLWR1043NDV4",
1496 "{product_name:TL-WR1043ND,product_ver:4.0.0,special_id:45550000}\n",
1497 .support_trail
= '\x00',
1500 /* We're using a dynamic kernel/rootfs split here */
1502 {"fs-uboot", 0x00000, 0x20000},
1503 {"firmware", 0x20000, 0xf30000},
1504 {"default-mac", 0xf50000, 0x00200},
1505 {"pin", 0xf50200, 0x00200},
1506 {"product-info", 0xf50400, 0x0fc00},
1507 {"soft-version", 0xf60000, 0x0b000},
1508 {"support-list", 0xf6b000, 0x04000},
1509 {"profile", 0xf70000, 0x04000},
1510 {"default-config", 0xf74000, 0x0b000},
1511 {"user-config", 0xf80000, 0x40000},
1512 {"partition-table", 0xfc0000, 0x10000},
1513 {"log", 0xfd0000, 0x20000},
1514 {"radio", 0xff0000, 0x10000},
1518 .first_sysupgrade_partition
= "os-image",
1519 .last_sysupgrade_partition
= "file-system"
1522 /** Firmware layout for the TL-WR902AC v1 */
1524 .id
= "TL-WR902AC-V1",
1528 "{product_name:TL-WR902AC,product_ver:1.0.0,special_id:45550000}\n"
1529 "{product_name:TL-WR902AC,product_ver:1.0.0,special_id:55530000}\n",
1530 .support_trail
= '\x00',
1534 384KB were moved from file-system to os-image
1535 in comparison to the stock image
1538 {"fs-uboot", 0x00000, 0x20000},
1539 {"firmware", 0x20000, 0x730000},
1540 {"default-mac", 0x750000, 0x00200},
1541 {"pin", 0x750200, 0x00200},
1542 {"product-info", 0x750400, 0x0fc00},
1543 {"soft-version", 0x760000, 0x0b000},
1544 {"support-list", 0x76b000, 0x04000},
1545 {"profile", 0x770000, 0x04000},
1546 {"default-config", 0x774000, 0x0b000},
1547 {"user-config", 0x780000, 0x40000},
1548 {"partition-table", 0x7c0000, 0x10000},
1549 {"log", 0x7d0000, 0x20000},
1550 {"radio", 0x7f0000, 0x10000},
1554 .first_sysupgrade_partition
= "os-image",
1555 .last_sysupgrade_partition
= "file-system",
1558 /** Firmware layout for the TL-WR942N V1 */
1564 "{product_name:TL-WR942N,product_ver:1.0.0,special_id:00000000}\r\n"
1565 "{product_name:TL-WR942N,product_ver:1.0.0,special_id:52550000}\r\n",
1566 .support_trail
= '\x00',
1570 {"fs-uboot", 0x00000, 0x20000},
1571 {"firmware", 0x20000, 0xe20000},
1572 {"default-mac", 0xe40000, 0x00200},
1573 {"pin", 0xe40200, 0x00200},
1574 {"product-info", 0xe40400, 0x0fc00},
1575 {"partition-table", 0xe50000, 0x10000},
1576 {"soft-version", 0xe60000, 0x10000},
1577 {"support-list", 0xe70000, 0x10000},
1578 {"profile", 0xe80000, 0x10000},
1579 {"default-config", 0xe90000, 0x10000},
1580 {"user-config", 0xea0000, 0x40000},
1581 {"qos-db", 0xee0000, 0x40000},
1582 {"certificate", 0xf20000, 0x10000},
1583 {"usb-config", 0xfb0000, 0x10000},
1584 {"log", 0xfc0000, 0x20000},
1585 {"radio-bk", 0xfe0000, 0x10000},
1586 {"radio", 0xff0000, 0x10000},
1590 .first_sysupgrade_partition
= "os-image",
1591 .last_sysupgrade_partition
= "file-system",
1594 /** Firmware layout for the RE200 v2 */
1600 "{product_name:RE200,product_ver:2.0.0,special_id:00000000}\n"
1601 "{product_name:RE200,product_ver:2.0.0,special_id:41520000}\n"
1602 "{product_name:RE200,product_ver:2.0.0,special_id:41550000}\n"
1603 "{product_name:RE200,product_ver:2.0.0,special_id:42520000}\n"
1604 "{product_name:RE200,product_ver:2.0.0,special_id:43410000}\n"
1605 "{product_name:RE200,product_ver:2.0.0,special_id:45530000}\n"
1606 "{product_name:RE200,product_ver:2.0.0,special_id:45550000}\n"
1607 "{product_name:RE200,product_ver:2.0.0,special_id:49440000}\n"
1608 "{product_name:RE200,product_ver:2.0.0,special_id:4a500000}\n"
1609 "{product_name:RE200,product_ver:2.0.0,special_id:4b520000}\n"
1610 "{product_name:RE200,product_ver:2.0.0,special_id:52550000}\n"
1611 "{product_name:RE200,product_ver:2.0.0,special_id:54570000}\n"
1612 "{product_name:RE200,product_ver:2.0.0,special_id:55530000}\n",
1613 .support_trail
= '\x00',
1617 {"fs-uboot", 0x00000, 0x20000},
1618 {"firmware", 0x20000, 0x7a0000},
1619 {"partition-table", 0x7c0000, 0x02000},
1620 {"default-mac", 0x7c2000, 0x00020},
1621 {"pin", 0x7c2100, 0x00020},
1622 {"product-info", 0x7c3100, 0x01000},
1623 {"soft-version", 0x7c4200, 0x01000},
1624 {"support-list", 0x7c5200, 0x01000},
1625 {"profile", 0x7c6200, 0x08000},
1626 {"config-info", 0x7ce200, 0x00400},
1627 {"user-config", 0x7d0000, 0x10000},
1628 {"default-config", 0x7e0000, 0x10000},
1629 {"radio", 0x7f0000, 0x10000},
1633 .first_sysupgrade_partition
= "os-image",
1634 .last_sysupgrade_partition
= "file-system"
1637 /** Firmware layout for the RE200 v3 */
1643 "{product_name:RE200,product_ver:3.0.0,special_id:00000000}\n"
1644 "{product_name:RE200,product_ver:3.0.0,special_id:41520000}\n"
1645 "{product_name:RE200,product_ver:3.0.0,special_id:41550000}\n"
1646 "{product_name:RE200,product_ver:3.0.0,special_id:42520000}\n"
1647 "{product_name:RE200,product_ver:3.0.0,special_id:43410000}\n"
1648 "{product_name:RE200,product_ver:3.0.0,special_id:45470000}\n"
1649 "{product_name:RE200,product_ver:3.0.0,special_id:45530000}\n"
1650 "{product_name:RE200,product_ver:3.0.0,special_id:45550000}\n"
1651 "{product_name:RE200,product_ver:3.0.0,special_id:49440000}\n"
1652 "{product_name:RE200,product_ver:3.0.0,special_id:4A500000}\n"
1653 "{product_name:RE200,product_ver:3.0.0,special_id:4B520000}\n"
1654 "{product_name:RE200,product_ver:3.0.0,special_id:52550000}\n"
1655 "{product_name:RE200,product_ver:3.0.0,special_id:54570000}\n"
1656 "{product_name:RE200,product_ver:3.0.0,special_id:55530000}\n",
1657 .support_trail
= '\x00',
1661 {"fs-uboot", 0x00000, 0x20000},
1662 {"firmware", 0x20000, 0x7a0000},
1663 {"partition-table", 0x7c0000, 0x02000},
1664 {"default-mac", 0x7c2000, 0x00020},
1665 {"pin", 0x7c2100, 0x00020},
1666 {"product-info", 0x7c3100, 0x01000},
1667 {"soft-version", 0x7c4200, 0x01000},
1668 {"support-list", 0x7c5200, 0x01000},
1669 {"profile", 0x7c6200, 0x08000},
1670 {"config-info", 0x7ce200, 0x00400},
1671 {"user-config", 0x7d0000, 0x10000},
1672 {"default-config", 0x7e0000, 0x10000},
1673 {"radio", 0x7f0000, 0x10000},
1677 .first_sysupgrade_partition
= "os-image",
1678 .last_sysupgrade_partition
= "file-system"
1681 /** Firmware layout for the RE220 v2 */
1687 "{product_name:RE220,product_ver:2.0.0,special_id:00000000}\n"
1688 "{product_name:RE220,product_ver:2.0.0,special_id:41520000}\n"
1689 "{product_name:RE220,product_ver:2.0.0,special_id:41550000}\n"
1690 "{product_name:RE220,product_ver:2.0.0,special_id:42520000}\n"
1691 "{product_name:RE220,product_ver:2.0.0,special_id:43410000}\n"
1692 "{product_name:RE220,product_ver:2.0.0,special_id:45530000}\n"
1693 "{product_name:RE220,product_ver:2.0.0,special_id:45550000}\n"
1694 "{product_name:RE220,product_ver:2.0.0,special_id:49440000}\n"
1695 "{product_name:RE220,product_ver:2.0.0,special_id:4a500000}\n"
1696 "{product_name:RE220,product_ver:2.0.0,special_id:4b520000}\n"
1697 "{product_name:RE220,product_ver:2.0.0,special_id:52550000}\n"
1698 "{product_name:RE220,product_ver:2.0.0,special_id:54570000}\n"
1699 "{product_name:RE220,product_ver:2.0.0,special_id:55530000}\n",
1700 .support_trail
= '\x00',
1704 {"fs-uboot", 0x00000, 0x20000},
1705 {"firmware", 0x20000, 0x7a0000},
1706 {"partition-table", 0x7c0000, 0x02000},
1707 {"default-mac", 0x7c2000, 0x00020},
1708 {"pin", 0x7c2100, 0x00020},
1709 {"product-info", 0x7c3100, 0x01000},
1710 {"soft-version", 0x7c4200, 0x01000},
1711 {"support-list", 0x7c5200, 0x01000},
1712 {"profile", 0x7c6200, 0x08000},
1713 {"config-info", 0x7ce200, 0x00400},
1714 {"user-config", 0x7d0000, 0x10000},
1715 {"default-config", 0x7e0000, 0x10000},
1716 {"radio", 0x7f0000, 0x10000},
1720 .first_sysupgrade_partition
= "os-image",
1721 .last_sysupgrade_partition
= "file-system"
1724 /** Firmware layout for the RE305 v1 */
1730 "{product_name:RE305,product_ver:1.0.0,special_id:45550000}\n"
1731 "{product_name:RE305,product_ver:1.0.0,special_id:55530000}\n"
1732 "{product_name:RE305,product_ver:1.0.0,special_id:4a500000}\n"
1733 "{product_name:RE305,product_ver:1.0.0,special_id:42520000}\n"
1734 "{product_name:RE305,product_ver:1.0.0,special_id:4b520000}\n"
1735 "{product_name:RE305,product_ver:1.0.0,special_id:41550000}\n"
1736 "{product_name:RE305,product_ver:1.0.0,special_id:43410000}\n",
1737 .support_trail
= '\x00',
1741 {"fs-uboot", 0x00000, 0x20000},
1742 {"firmware", 0x20000, 0x5e0000},
1743 {"partition-table", 0x600000, 0x02000},
1744 {"default-mac", 0x610000, 0x00020},
1745 {"pin", 0x610100, 0x00020},
1746 {"product-info", 0x611100, 0x01000},
1747 {"soft-version", 0x620000, 0x01000},
1748 {"support-list", 0x621000, 0x01000},
1749 {"profile", 0x622000, 0x08000},
1750 {"user-config", 0x630000, 0x10000},
1751 {"default-config", 0x640000, 0x10000},
1752 {"radio", 0x7f0000, 0x10000},
1756 .first_sysupgrade_partition
= "os-image",
1757 .last_sysupgrade_partition
= "file-system"
1760 /** Firmware layout for the RE350 v1 */
1766 "{product_name:RE350,product_ver:1.0.0,special_id:45550000}\n"
1767 "{product_name:RE350,product_ver:1.0.0,special_id:00000000}\n"
1768 "{product_name:RE350,product_ver:1.0.0,special_id:41550000}\n"
1769 "{product_name:RE350,product_ver:1.0.0,special_id:55530000}\n"
1770 "{product_name:RE350,product_ver:1.0.0,special_id:43410000}\n"
1771 "{product_name:RE350,product_ver:1.0.0,special_id:4b520000}\n"
1772 "{product_name:RE350,product_ver:1.0.0,special_id:4a500000}\n",
1773 .support_trail
= '\x00',
1776 /** We're using a dynamic kernel/rootfs split here */
1778 {"fs-uboot", 0x00000, 0x20000},
1779 {"firmware", 0x20000, 0x5e0000},
1780 {"partition-table", 0x600000, 0x02000},
1781 {"default-mac", 0x610000, 0x00020},
1782 {"pin", 0x610100, 0x00020},
1783 {"product-info", 0x611100, 0x01000},
1784 {"soft-version", 0x620000, 0x01000},
1785 {"support-list", 0x621000, 0x01000},
1786 {"profile", 0x622000, 0x08000},
1787 {"user-config", 0x630000, 0x10000},
1788 {"default-config", 0x640000, 0x10000},
1789 {"radio", 0x7f0000, 0x10000},
1793 .first_sysupgrade_partition
= "os-image",
1794 .last_sysupgrade_partition
= "file-system"
1797 /** Firmware layout for the RE350K v1 */
1803 "{product_name:RE350K,product_ver:1.0.0,special_id:00000000,product_region:US}\n",
1804 .support_trail
= '\x00',
1807 /** We're using a dynamic kernel/rootfs split here */
1809 {"fs-uboot", 0x00000, 0x20000},
1810 {"firmware", 0x20000, 0xd70000},
1811 {"partition-table", 0xd90000, 0x02000},
1812 {"default-mac", 0xda0000, 0x00020},
1813 {"pin", 0xda0100, 0x00020},
1814 {"product-info", 0xda1100, 0x01000},
1815 {"soft-version", 0xdb0000, 0x01000},
1816 {"support-list", 0xdb1000, 0x01000},
1817 {"profile", 0xdb2000, 0x08000},
1818 {"user-config", 0xdc0000, 0x10000},
1819 {"default-config", 0xdd0000, 0x10000},
1820 {"device-id", 0xde0000, 0x00108},
1821 {"radio", 0xff0000, 0x10000},
1825 .first_sysupgrade_partition
= "os-image",
1826 .last_sysupgrade_partition
= "file-system"
1829 /** Firmware layout for the RE355 */
1835 "{product_name:RE355,product_ver:1.0.0,special_id:00000000}\r\n"
1836 "{product_name:RE355,product_ver:1.0.0,special_id:55530000}\r\n"
1837 "{product_name:RE355,product_ver:1.0.0,special_id:45550000}\r\n"
1838 "{product_name:RE355,product_ver:1.0.0,special_id:4A500000}\r\n"
1839 "{product_name:RE355,product_ver:1.0.0,special_id:43410000}\r\n"
1840 "{product_name:RE355,product_ver:1.0.0,special_id:41550000}\r\n"
1841 "{product_name:RE355,product_ver:1.0.0,special_id:4B520000}\r\n"
1842 "{product_name:RE355,product_ver:1.0.0,special_id:55534100}\r\n",
1843 .support_trail
= '\x00',
1846 /* We're using a dynamic kernel/rootfs split here */
1848 {"fs-uboot", 0x00000, 0x20000},
1849 {"firmware", 0x20000, 0x5e0000},
1850 {"partition-table", 0x600000, 0x02000},
1851 {"default-mac", 0x610000, 0x00020},
1852 {"pin", 0x610100, 0x00020},
1853 {"product-info", 0x611100, 0x01000},
1854 {"soft-version", 0x620000, 0x01000},
1855 {"support-list", 0x621000, 0x01000},
1856 {"profile", 0x622000, 0x08000},
1857 {"user-config", 0x630000, 0x10000},
1858 {"default-config", 0x640000, 0x10000},
1859 {"radio", 0x7f0000, 0x10000},
1863 .first_sysupgrade_partition
= "os-image",
1864 .last_sysupgrade_partition
= "file-system"
1867 /** Firmware layout for the RE450 */
1873 "{product_name:RE450,product_ver:1.0.0,special_id:00000000}\r\n"
1874 "{product_name:RE450,product_ver:1.0.0,special_id:55530000}\r\n"
1875 "{product_name:RE450,product_ver:1.0.0,special_id:45550000}\r\n"
1876 "{product_name:RE450,product_ver:1.0.0,special_id:4A500000}\r\n"
1877 "{product_name:RE450,product_ver:1.0.0,special_id:43410000}\r\n"
1878 "{product_name:RE450,product_ver:1.0.0,special_id:41550000}\r\n"
1879 "{product_name:RE450,product_ver:1.0.0,special_id:4B520000}\r\n"
1880 "{product_name:RE450,product_ver:1.0.0,special_id:55534100}\r\n",
1881 .support_trail
= '\x00',
1884 /** We're using a dynamic kernel/rootfs split here */
1886 {"fs-uboot", 0x00000, 0x20000},
1887 {"firmware", 0x20000, 0x5e0000},
1888 {"partition-table", 0x600000, 0x02000},
1889 {"default-mac", 0x610000, 0x00020},
1890 {"pin", 0x610100, 0x00020},
1891 {"product-info", 0x611100, 0x01000},
1892 {"soft-version", 0x620000, 0x01000},
1893 {"support-list", 0x621000, 0x01000},
1894 {"profile", 0x622000, 0x08000},
1895 {"user-config", 0x630000, 0x10000},
1896 {"default-config", 0x640000, 0x10000},
1897 {"radio", 0x7f0000, 0x10000},
1901 .first_sysupgrade_partition
= "os-image",
1902 .last_sysupgrade_partition
= "file-system"
1905 /** Firmware layout for the RE450 v2 */
1911 "{product_name:RE450,product_ver:2.0.0,special_id:00000000}\r\n"
1912 "{product_name:RE450,product_ver:2.0.0,special_id:55530000}\r\n"
1913 "{product_name:RE450,product_ver:2.0.0,special_id:45550000}\r\n"
1914 "{product_name:RE450,product_ver:2.0.0,special_id:4A500000}\r\n"
1915 "{product_name:RE450,product_ver:2.0.0,special_id:43410000}\r\n"
1916 "{product_name:RE450,product_ver:2.0.0,special_id:41550000}\r\n"
1917 "{product_name:RE450,product_ver:2.0.0,special_id:41530000}\r\n"
1918 "{product_name:RE450,product_ver:2.0.0,special_id:4B520000}\r\n"
1919 "{product_name:RE450,product_ver:2.0.0,special_id:42520000}\r\n",
1920 .support_trail
= '\x00',
1923 /* We're using a dynamic kernel/rootfs split here */
1925 {"fs-uboot", 0x00000, 0x20000},
1926 {"firmware", 0x20000, 0x5e0000},
1927 {"partition-table", 0x600000, 0x02000},
1928 {"default-mac", 0x610000, 0x00020},
1929 {"pin", 0x610100, 0x00020},
1930 {"product-info", 0x611100, 0x01000},
1931 {"soft-version", 0x620000, 0x01000},
1932 {"support-list", 0x621000, 0x01000},
1933 {"profile", 0x622000, 0x08000},
1934 {"user-config", 0x630000, 0x10000},
1935 {"default-config", 0x640000, 0x10000},
1936 {"radio", 0x7f0000, 0x10000},
1940 .first_sysupgrade_partition
= "os-image",
1941 .last_sysupgrade_partition
= "file-system"
1944 /** Firmware layout for the RE450 v3 */
1950 "{product_name:RE450,product_ver:3.0.0,special_id:00000000}\r\n"
1951 "{product_name:RE450,product_ver:3.0.0,special_id:55530000}\r\n"
1952 "{product_name:RE450,product_ver:3.0.0,special_id:45550000}\r\n"
1953 "{product_name:RE450,product_ver:3.0.0,special_id:4A500000}\r\n"
1954 "{product_name:RE450,product_ver:3.0.0,special_id:43410000}\r\n"
1955 "{product_name:RE450,product_ver:3.0.0,special_id:41550000}\r\n"
1956 "{product_name:RE450,product_ver:3.0.0,special_id:41530000}\r\n"
1957 "{product_name:RE450,product_ver:3.0.0,special_id:4B520000}\r\n"
1958 "{product_name:RE450,product_ver:3.0.0,special_id:42520000}\r\n",
1959 .support_trail
= '\x00',
1962 /* We're using a dynamic kernel/rootfs split here */
1964 {"fs-uboot", 0x00000, 0x20000},
1965 {"default-mac", 0x20000, 0x00020},
1966 {"pin", 0x20020, 0x00020},
1967 {"product-info", 0x21000, 0x01000},
1968 {"partition-table", 0x22000, 0x02000},
1969 {"soft-version", 0x24000, 0x01000},
1970 {"support-list", 0x25000, 0x01000},
1971 {"profile", 0x26000, 0x08000},
1972 {"user-config", 0x2e000, 0x10000},
1973 {"default-config", 0x3e000, 0x10000},
1974 {"config-info", 0x4e000, 0x00400},
1975 {"firmware", 0x50000, 0x7a0000},
1976 {"radio", 0x7f0000, 0x10000},
1980 .first_sysupgrade_partition
= "os-image",
1981 .last_sysupgrade_partition
= "file-system"
1984 /** Firmware layout for the RE500 */
1990 "{product_name:RE500,product_ver:1.0.0,special_id:00000000}\r\n"
1991 "{product_name:RE500,product_ver:1.0.0,special_id:55530000}\r\n"
1992 "{product_name:RE500,product_ver:1.0.0,special_id:45550000}\r\n"
1993 "{product_name:RE500,product_ver:1.0.0,special_id:4A500000}\r\n"
1994 "{product_name:RE500,product_ver:1.0.0,special_id:43410000}\r\n"
1995 "{product_name:RE500,product_ver:1.0.0,special_id:41550000}\r\n"
1996 "{product_name:RE500,product_ver:1.0.0,special_id:41530000}\r\n",
1997 .support_trail
= '\x00',
2000 /* We're using a dynamic kernel/rootfs split here */
2002 {"fs-uboot", 0x00000, 0x20000},
2003 {"firmware", 0x20000, 0xde0000},
2004 {"partition-table", 0xe00000, 0x02000},
2005 {"default-mac", 0xe10000, 0x00020},
2006 {"pin", 0xe10100, 0x00020},
2007 {"product-info", 0xe11100, 0x01000},
2008 {"soft-version", 0xe20000, 0x01000},
2009 {"support-list", 0xe21000, 0x01000},
2010 {"profile", 0xe22000, 0x08000},
2011 {"user-config", 0xe30000, 0x10000},
2012 {"default-config", 0xe40000, 0x10000},
2013 {"radio", 0xff0000, 0x10000},
2017 .first_sysupgrade_partition
= "os-image",
2018 .last_sysupgrade_partition
= "file-system"
2021 /** Firmware layout for the RE650 */
2027 "{product_name:RE650,product_ver:1.0.0,special_id:00000000}\r\n"
2028 "{product_name:RE650,product_ver:1.0.0,special_id:55530000}\r\n"
2029 "{product_name:RE650,product_ver:1.0.0,special_id:45550000}\r\n"
2030 "{product_name:RE650,product_ver:1.0.0,special_id:4A500000}\r\n"
2031 "{product_name:RE650,product_ver:1.0.0,special_id:43410000}\r\n"
2032 "{product_name:RE650,product_ver:1.0.0,special_id:41550000}\r\n"
2033 "{product_name:RE650,product_ver:1.0.0,special_id:41530000}\r\n",
2034 .support_trail
= '\x00',
2037 /* We're using a dynamic kernel/rootfs split here */
2039 {"fs-uboot", 0x00000, 0x20000},
2040 {"firmware", 0x20000, 0xde0000},
2041 {"partition-table", 0xe00000, 0x02000},
2042 {"default-mac", 0xe10000, 0x00020},
2043 {"pin", 0xe10100, 0x00020},
2044 {"product-info", 0xe11100, 0x01000},
2045 {"soft-version", 0xe20000, 0x01000},
2046 {"support-list", 0xe21000, 0x01000},
2047 {"profile", 0xe22000, 0x08000},
2048 {"user-config", 0xe30000, 0x10000},
2049 {"default-config", 0xe40000, 0x10000},
2050 {"radio", 0xff0000, 0x10000},
2054 .first_sysupgrade_partition
= "os-image",
2055 .last_sysupgrade_partition
= "file-system"
2061 #define error(_ret, _errno, _str, ...) \
2063 fprintf(stderr, _str ": %s\n", ## __VA_ARGS__, \
2064 strerror(_errno)); \
2070 /** Stores a uint32 as big endian */
2071 static inline void put32(uint8_t *buf
, uint32_t val
) {
2078 /** Allocates a new image partition */
2079 static struct image_partition_entry
alloc_image_partition(const char *name
, size_t len
) {
2080 struct image_partition_entry entry
= {name
, len
, malloc(len
)};
2082 error(1, errno
, "malloc");
2087 /** Frees an image partition */
2088 static void free_image_partition(struct image_partition_entry entry
) {
2092 static time_t source_date_epoch
= -1;
2093 static void set_source_date_epoch() {
2094 char *env
= getenv("SOURCE_DATE_EPOCH");
2098 source_date_epoch
= strtoull(env
, &endptr
, 10);
2099 if (errno
|| (endptr
&& *endptr
!= '\0')) {
2100 fprintf(stderr
, "Invalid SOURCE_DATE_EPOCH");
2106 /** Generates the partition-table partition */
2107 static struct image_partition_entry
make_partition_table(const struct flash_partition_entry
*p
) {
2108 struct image_partition_entry entry
= alloc_image_partition("partition-table", 0x800);
2110 char *s
= (char *)entry
.data
, *end
= (char *)(s
+entry
.size
);
2118 for (i
= 0; p
[i
].name
; i
++) {
2120 size_t w
= snprintf(s
, len
, "partition %s base 0x%05x size 0x%05x\n", p
[i
].name
, p
[i
].base
, p
[i
].size
);
2123 error(1, 0, "flash partition table overflow?");
2130 memset(s
, 0xff, end
-s
);
2136 /** Generates a binary-coded decimal representation of an integer in the range [0, 99] */
2137 static inline uint8_t bcd(uint8_t v
) {
2138 return 0x10 * (v
/10) + v
%10;
2142 /** Generates the soft-version partition */
2143 static struct image_partition_entry
make_soft_version(struct device_info
*info
, uint32_t rev
) {
2144 size_t part_len
= sizeof(struct soft_version
);
2145 if (info
->soft_ver_compat_level
> 0)
2146 part_len
+= sizeof(uint32_t);
2148 struct image_partition_entry entry
=
2149 alloc_image_partition("soft-version", part_len
+1);
2150 struct soft_version
*s
= (struct soft_version
*)entry
.data
;
2154 if (source_date_epoch
!= -1)
2155 t
= source_date_epoch
;
2156 else if (time(&t
) == (time_t)(-1))
2157 error(1, errno
, "time");
2159 struct tm
*tm
= gmtime(&t
);
2161 /* Partition contents size, minus 8 byte header and trailing byte */
2162 s
->data_len
= htonl(entry
.size
-9);
2166 s
->version_major
= 0;
2167 s
->version_minor
= 0;
2168 s
->version_patch
= 0;
2170 s
->year_hi
= bcd((1900+tm
->tm_year
)/100);
2171 s
->year_lo
= bcd(tm
->tm_year
%100);
2172 s
->month
= bcd(tm
->tm_mon
+1);
2173 s
->day
= bcd(tm
->tm_mday
);
2174 s
->rev
= htonl(rev
);
2176 if (info
->soft_ver_compat_level
> 0)
2177 *(uint32_t *)(entry
.data
+ sizeof(struct soft_version
)) =
2178 htonl(info
->soft_ver_compat_level
);
2180 entry
.data
[entry
.size
-1] = 0xff;
2185 static struct image_partition_entry
make_soft_version_from_string(const char *soft_ver
) {
2186 /** String length _including_ the terminating zero byte */
2187 uint32_t ver_len
= strlen(soft_ver
) + 1;
2188 /** Partition contains 64 bit header, the version string, and one additional null byte */
2189 size_t partition_len
= 2*sizeof(uint32_t) + ver_len
+ 1;
2190 struct image_partition_entry entry
= alloc_image_partition("soft-version", partition_len
);
2192 uint32_t *len
= (uint32_t *)entry
.data
;
2193 len
[0] = htonl(ver_len
);
2195 memcpy(&len
[2], soft_ver
, ver_len
);
2197 entry
.data
[partition_len
- 1] = 0;
2202 /** Generates the support-list partition */
2203 static struct image_partition_entry
make_support_list(struct device_info
*info
) {
2204 size_t len
= strlen(info
->support_list
);
2205 struct image_partition_entry entry
= alloc_image_partition("support-list", len
+ 9);
2207 put32(entry
.data
, len
);
2208 memset(entry
.data
+4, 0, 4);
2209 memcpy(entry
.data
+8, info
->support_list
, len
);
2210 entry
.data
[len
+8] = info
->support_trail
;
2215 /** Creates a new image partition with an arbitrary name from a file */
2216 static struct image_partition_entry
read_file(const char *part_name
, const char *filename
, bool add_jffs2_eof
, struct flash_partition_entry
*file_system_partition
) {
2217 struct stat statbuf
;
2219 if (stat(filename
, &statbuf
) < 0)
2220 error(1, errno
, "unable to stat file `%s'", filename
);
2222 size_t len
= statbuf
.st_size
;
2224 if (add_jffs2_eof
) {
2225 if (file_system_partition
)
2226 len
= ALIGN(len
+ file_system_partition
->base
, 0x10000) + sizeof(jffs2_eof_mark
) - file_system_partition
->base
;
2228 len
= ALIGN(len
, 0x10000) + sizeof(jffs2_eof_mark
);
2231 struct image_partition_entry entry
= alloc_image_partition(part_name
, len
);
2233 FILE *file
= fopen(filename
, "rb");
2235 error(1, errno
, "unable to open file `%s'", filename
);
2237 if (fread(entry
.data
, statbuf
.st_size
, 1, file
) != 1)
2238 error(1, errno
, "unable to read file `%s'", filename
);
2240 if (add_jffs2_eof
) {
2241 uint8_t *eof
= entry
.data
+ statbuf
.st_size
, *end
= entry
.data
+entry
.size
;
2243 memset(eof
, 0xff, end
- eof
- sizeof(jffs2_eof_mark
));
2244 memcpy(end
- sizeof(jffs2_eof_mark
), jffs2_eof_mark
, sizeof(jffs2_eof_mark
));
2252 /** Creates a new image partition from arbitrary data */
2253 static struct image_partition_entry
put_data(const char *part_name
, const char *datain
, size_t len
) {
2255 struct image_partition_entry entry
= alloc_image_partition(part_name
, len
);
2257 memcpy(entry
.data
, datain
, len
);
2263 Copies a list of image partitions into an image buffer and generates the image partition table while doing so
2265 Example image partition table:
2267 fwup-ptn partition-table base 0x00800 size 0x00800
2268 fwup-ptn os-image base 0x01000 size 0x113b45
2269 fwup-ptn file-system base 0x114b45 size 0x1d0004
2270 fwup-ptn support-list base 0x2e4b49 size 0x000d1
2272 Each line of the partition table is terminated with the bytes 09 0d 0a ("\t\r\n"),
2273 the end of the partition table is marked with a zero byte.
2275 The firmware image must contain at least the partition-table and support-list partitions
2276 to be accepted. There aren't any alignment constraints for the image partitions.
2278 The partition-table partition contains the actual flash layout; partitions
2279 from the image partition table are mapped to the corresponding flash partitions during
2280 the firmware upgrade. The support-list partition contains a list of devices supported by
2283 The base offsets in the firmware partition table are relative to the end
2284 of the vendor information block, so the partition-table partition will
2285 actually start at offset 0x1814 of the image.
2287 I think partition-table must be the first partition in the firmware image.
2289 static void put_partitions(uint8_t *buffer
, const struct flash_partition_entry
*flash_parts
, const struct image_partition_entry
*parts
) {
2291 char *image_pt
= (char *)buffer
, *end
= image_pt
+ 0x800;
2293 size_t base
= 0x800;
2294 for (i
= 0; parts
[i
].name
; i
++) {
2295 for (j
= 0; flash_parts
[j
].name
; j
++) {
2296 if (!strcmp(flash_parts
[j
].name
, parts
[i
].name
)) {
2297 if (parts
[i
].size
> flash_parts
[j
].size
)
2298 error(1, 0, "%s partition too big (more than %u bytes)", flash_parts
[j
].name
, (unsigned)flash_parts
[j
].size
);
2303 assert(flash_parts
[j
].name
);
2305 memcpy(buffer
+ base
, parts
[i
].data
, parts
[i
].size
);
2307 size_t len
= end
-image_pt
;
2308 size_t w
= snprintf(image_pt
, len
, "fwup-ptn %s base 0x%05x size 0x%05x\t\r\n", parts
[i
].name
, (unsigned)base
, (unsigned)parts
[i
].size
);
2311 error(1, 0, "image partition table overflow?");
2315 base
+= parts
[i
].size
;
2319 /** Generates and writes the image MD5 checksum */
2320 static void put_md5(uint8_t *md5
, uint8_t *buffer
, unsigned int len
) {
2324 MD5_Update(&ctx
, md5_salt
, (unsigned int)sizeof(md5_salt
));
2325 MD5_Update(&ctx
, buffer
, len
);
2326 MD5_Final(md5
, &ctx
);
2331 Generates the firmware image in factory format
2337 0000-0003 Image size (4 bytes, big endian)
2338 0004-0013 MD5 hash (hash of a 16 byte salt and the image data starting with byte 0x14)
2339 0014-0017 Vendor information length (without padding) (4 bytes, big endian)
2340 0018-1013 Vendor information (4092 bytes, padded with 0xff; there seem to be older
2341 (VxWorks-based) TP-LINK devices which use a smaller vendor information block)
2342 1014-1813 Image partition table (2048 bytes, padded with 0xff)
2343 1814-xxxx Firmware partitions
2345 static void * generate_factory_image(struct device_info
*info
, const struct image_partition_entry
*parts
, size_t *len
) {
2349 for (i
= 0; parts
[i
].name
; i
++)
2350 *len
+= parts
[i
].size
;
2352 uint8_t *image
= malloc(*len
);
2354 error(1, errno
, "malloc");
2356 memset(image
, 0xff, *len
);
2360 size_t vendor_len
= strlen(info
->vendor
);
2361 put32(image
+0x14, vendor_len
);
2362 memcpy(image
+0x18, info
->vendor
, vendor_len
);
2365 put_partitions(image
+ 0x1014, info
->partitions
, parts
);
2366 put_md5(image
+0x04, image
+0x14, *len
-0x14);
2372 Generates the firmware image in sysupgrade format
2374 This makes some assumptions about the provided flash and image partition tables and
2375 should be generalized when TP-LINK starts building its safeloader into hardware with
2376 different flash layouts.
2378 static void * generate_sysupgrade_image(struct device_info
*info
, const struct image_partition_entry
*image_parts
, size_t *len
) {
2380 size_t flash_first_partition_index
= 0;
2381 size_t flash_last_partition_index
= 0;
2382 const struct flash_partition_entry
*flash_first_partition
= NULL
;
2383 const struct flash_partition_entry
*flash_last_partition
= NULL
;
2384 const struct image_partition_entry
*image_last_partition
= NULL
;
2386 /** Find first and last partitions */
2387 for (i
= 0; info
->partitions
[i
].name
; i
++) {
2388 if (!strcmp(info
->partitions
[i
].name
, info
->first_sysupgrade_partition
)) {
2389 flash_first_partition
= &info
->partitions
[i
];
2390 flash_first_partition_index
= i
;
2391 } else if (!strcmp(info
->partitions
[i
].name
, info
->last_sysupgrade_partition
)) {
2392 flash_last_partition
= &info
->partitions
[i
];
2393 flash_last_partition_index
= i
;
2397 assert(flash_first_partition
&& flash_last_partition
);
2398 assert(flash_first_partition_index
< flash_last_partition_index
);
2400 /** Find last partition from image to calculate needed size */
2401 for (i
= 0; image_parts
[i
].name
; i
++) {
2402 if (!strcmp(image_parts
[i
].name
, info
->last_sysupgrade_partition
)) {
2403 image_last_partition
= &image_parts
[i
];
2408 assert(image_last_partition
);
2410 *len
= flash_last_partition
->base
- flash_first_partition
->base
+ image_last_partition
->size
;
2412 uint8_t *image
= malloc(*len
);
2414 error(1, errno
, "malloc");
2416 memset(image
, 0xff, *len
);
2418 for (i
= flash_first_partition_index
; i
<= flash_last_partition_index
; i
++) {
2419 for (j
= 0; image_parts
[j
].name
; j
++) {
2420 if (!strcmp(info
->partitions
[i
].name
, image_parts
[j
].name
)) {
2421 if (image_parts
[j
].size
> info
->partitions
[i
].size
)
2422 error(1, 0, "%s partition too big (more than %u bytes)", info
->partitions
[i
].name
, (unsigned)info
->partitions
[i
].size
);
2423 memcpy(image
+ info
->partitions
[i
].base
- flash_first_partition
->base
, image_parts
[j
].data
, image_parts
[j
].size
);
2427 assert(image_parts
[j
].name
);
2434 /** Generates an image according to a given layout and writes it to a file */
2435 static void build_image(const char *output
,
2436 const char *kernel_image
,
2437 const char *rootfs_image
,
2441 struct device_info
*info
) {
2445 struct image_partition_entry parts
[7] = {};
2447 struct flash_partition_entry
*firmware_partition
= NULL
;
2448 struct flash_partition_entry
*os_image_partition
= NULL
;
2449 struct flash_partition_entry
*file_system_partition
= NULL
;
2450 size_t firmware_partition_index
= 0;
2452 for (i
= 0; info
->partitions
[i
].name
; i
++) {
2453 if (!strcmp(info
->partitions
[i
].name
, "firmware"))
2455 firmware_partition
= &info
->partitions
[i
];
2456 firmware_partition_index
= i
;
2460 if (firmware_partition
)
2462 os_image_partition
= &info
->partitions
[firmware_partition_index
];
2463 file_system_partition
= &info
->partitions
[firmware_partition_index
+ 1];
2466 if (stat(kernel_image
, &kernel
) < 0)
2467 error(1, errno
, "unable to stat file `%s'", kernel_image
);
2469 if (kernel
.st_size
> firmware_partition
->size
)
2470 error(1, 0, "kernel overflowed firmware partition\n");
2472 for (i
= MAX_PARTITIONS
-1; i
>= firmware_partition_index
+ 1; i
--)
2473 info
->partitions
[i
+1] = info
->partitions
[i
];
2475 file_system_partition
->name
= "file-system";
2476 file_system_partition
->base
= firmware_partition
->base
+ kernel
.st_size
;
2478 /* Align partition start to erase blocks for factory images only */
2480 file_system_partition
->base
= ALIGN(firmware_partition
->base
+ kernel
.st_size
, 0x10000);
2482 file_system_partition
->size
= firmware_partition
->size
- file_system_partition
->base
;
2484 os_image_partition
->name
= "os-image";
2485 os_image_partition
->size
= kernel
.st_size
;
2488 parts
[0] = make_partition_table(info
->partitions
);
2490 parts
[1] = make_soft_version_from_string(info
->soft_ver
);
2492 parts
[1] = make_soft_version(info
, rev
);
2494 parts
[2] = make_support_list(info
);
2495 parts
[3] = read_file("os-image", kernel_image
, false, NULL
);
2496 parts
[4] = read_file("file-system", rootfs_image
, add_jffs2_eof
, file_system_partition
);
2498 /* Some devices need the extra-para partition to accept the firmware */
2499 if (strcasecmp(info
->id
, "ARCHER-C2-V3") == 0 ||
2500 strcasecmp(info
->id
, "ARCHER-C25-V1") == 0 ||
2501 strcasecmp(info
->id
, "ARCHER-C59-V2") == 0 ||
2502 strcasecmp(info
->id
, "ARCHER-C60-V2") == 0 ||
2503 strcasecmp(info
->id
, "ARCHER-C60-V3") == 0 ||
2504 strcasecmp(info
->id
, "TLWR1043NV5") == 0) {
2505 const char mdat
[11] = {0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00};
2506 parts
[5] = put_data("extra-para", mdat
, 11);
2507 } else if (strcasecmp(info
->id
, "ARCHER-A7-V5") == 0 || strcasecmp(info
->id
, "ARCHER-C7-V4") == 0 || strcasecmp(info
->id
, "ARCHER-C7-V5") == 0) {
2508 const char mdat
[11] = {0x01, 0x00, 0x00, 0x02, 0x00, 0x00, 0xca, 0x00, 0x01, 0x00, 0x00};
2509 parts
[5] = put_data("extra-para", mdat
, 11);
2510 } else if (strcasecmp(info
->id
, "ARCHER-C6-V2") == 0) {
2511 const char mdat
[11] = {0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00};
2512 parts
[5] = put_data("extra-para", mdat
, 11);
2513 } else if (strcasecmp(info
->id
, "ARCHER-C6-V2-US") == 0) {
2514 const char mdat
[11] = {0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x00};
2515 parts
[5] = put_data("extra-para", mdat
, 11);
2521 image
= generate_sysupgrade_image(info
, parts
, &len
);
2523 image
= generate_factory_image(info
, parts
, &len
);
2525 FILE *file
= fopen(output
, "wb");
2527 error(1, errno
, "unable to open output file");
2529 if (fwrite(image
, len
, 1, file
) != 1)
2530 error(1, 0, "unable to write output file");
2536 for (i
= 0; parts
[i
].name
; i
++)
2537 free_image_partition(parts
[i
]);
2541 static void usage(const char *argv0
) {
2543 "Usage: %s [OPTIONS...]\n"
2546 " -h show this help\n"
2548 "Create a new image:\n"
2549 " -B <board> create image for the board specified with <board>\n"
2550 " -k <file> read kernel image from the file <file>\n"
2551 " -r <file> read rootfs image from the file <file>\n"
2552 " -o <file> write output to the file <file>\n"
2553 " -V <rev> sets the revision number to <rev>\n"
2554 " -j add jffs2 end-of-filesystem markers\n"
2555 " -S create sysupgrade instead of factory image\n"
2556 "Extract an old image:\n"
2557 " -x <file> extract all oem firmware partition\n"
2558 " -d <dir> destination to extract the firmware partition\n"
2559 " -z <file> convert an oem firmware into a sysupgade file. Use -o for output file\n",
2565 static struct device_info
*find_board(const char *id
)
2567 struct device_info
*board
= NULL
;
2569 for (board
= boards
; board
->id
!= NULL
; board
++)
2570 if (strcasecmp(id
, board
->id
) == 0)
2576 static int add_flash_partition(
2577 struct flash_partition_entry
*part_list
,
2584 /* check if the list has a free entry */
2585 for (ptr
= 0; ptr
< max_entries
; ptr
++, part_list
++) {
2586 if (part_list
->name
== NULL
&&
2587 part_list
->base
== 0 &&
2588 part_list
->size
== 0)
2592 if (ptr
== max_entries
) {
2593 error(1, 0, "No free flash part entry available.");
2596 part_list
->name
= calloc(1, strlen(name
) + 1);
2597 if (!part_list
->name
) {
2598 error(1, 0, "Unable to allocate memory");
2601 memcpy((char *)part_list
->name
, name
, strlen(name
));
2602 part_list
->base
= base
;
2603 part_list
->size
= size
;
2608 /** read the partition table into struct flash_partition_entry */
2609 static int read_partition_table(
2610 FILE *file
, long offset
,
2611 struct flash_partition_entry
*entries
, size_t max_entries
,
2616 const char *parthdr
= NULL
;
2617 const char *fwuphdr
= "fwup-ptn";
2618 const char *flashhdr
= "partition";
2620 /* TODO: search for the partition table */
2630 error(1, 0, "Invalid partition table");
2633 if (fseek(file
, offset
, SEEK_SET
) < 0)
2634 error(1, errno
, "Can not seek in the firmware");
2636 if (fread(buf
, 2048, 1, file
) != 1)
2637 error(1, errno
, "Can not read fwup-ptn from the firmware");
2641 /* look for the partition header */
2642 if (memcmp(buf
, parthdr
, strlen(parthdr
)) != 0) {
2643 fprintf(stderr
, "DEBUG: can not find fwuphdr\n");
2648 end
= buf
+ sizeof(buf
);
2649 while ((ptr
+ strlen(parthdr
)) < end
&&
2650 memcmp(ptr
, parthdr
, strlen(parthdr
)) == 0) {
2654 char name
[32] = { 0 };
2656 unsigned long base
= 0;
2657 unsigned long size
= 0;
2659 end_part
= memchr(ptr
, '\n', (end
- ptr
));
2660 if (end_part
== NULL
) {
2661 /* in theory this should never happen, because a partition always ends with 0x09, 0x0D, 0x0A */
2665 for (int i
= 0; i
<= 4; i
++) {
2666 if (end_part
<= ptr
)
2669 end_element
= memchr(ptr
, 0x20, (end_part
- ptr
));
2670 if (end_element
== NULL
) {
2671 error(1, errno
, "Ignoring the rest of the partition entries.");
2676 /* partition header */
2678 ptr
= end_element
+ 1;
2682 name_len
= (end_element
- ptr
) > 31 ? 31 : (end_element
- ptr
);
2683 strncpy(name
, ptr
, name_len
);
2684 name
[name_len
] = '\0';
2685 ptr
= end_element
+ 1;
2690 ptr
= end_element
+ 1;
2695 base
= strtoul(ptr
, NULL
, 16);
2696 ptr
= end_element
+ 1;
2701 ptr
= end_element
+ 1;
2702 /* actual size. The last element doesn't have a sepeartor */
2703 size
= strtoul(ptr
, NULL
, 16);
2704 /* the part ends with 0x09, 0x0d, 0x0a */
2706 add_flash_partition(entries
, max_entries
, name
, base
, size
);
2715 static void write_partition(
2717 size_t firmware_offset
,
2718 struct flash_partition_entry
*entry
,
2724 fseek(input_file
, entry
->base
+ firmware_offset
, SEEK_SET
);
2726 for (offset
= 0; sizeof(buf
) + offset
<= entry
->size
; offset
+= sizeof(buf
)) {
2727 if (fread(buf
, sizeof(buf
), 1, input_file
) != 1)
2728 error(1, errno
, "Can not read partition from input_file");
2730 if (fwrite(buf
, sizeof(buf
), 1, output_file
) != 1)
2731 error(1, errno
, "Can not write partition to output_file");
2733 /* write last chunk smaller than buffer */
2734 if (offset
< entry
->size
) {
2735 offset
= entry
->size
- offset
;
2736 if (fread(buf
, offset
, 1, input_file
) != 1)
2737 error(1, errno
, "Can not read partition from input_file");
2738 if (fwrite(buf
, offset
, 1, output_file
) != 1)
2739 error(1, errno
, "Can not write partition to output_file");
2743 static int extract_firmware_partition(FILE *input_file
, size_t firmware_offset
, struct flash_partition_entry
*entry
, const char *output_directory
)
2746 char output
[PATH_MAX
];
2748 snprintf(output
, PATH_MAX
, "%s/%s", output_directory
, entry
->name
);
2749 output_file
= fopen(output
, "wb+");
2750 if (output_file
== NULL
) {
2751 error(1, errno
, "Can not open output file %s", output
);
2754 write_partition(input_file
, firmware_offset
, entry
, output_file
);
2756 fclose(output_file
);
2761 /** extract all partitions from the firmware file */
2762 static int extract_firmware(const char *input
, const char *output_directory
)
2764 struct flash_partition_entry entries
[16] = { 0 };
2765 size_t max_entries
= 16;
2766 size_t firmware_offset
= 0x1014;
2769 struct stat statbuf
;
2771 /* check input file */
2772 if (stat(input
, &statbuf
)) {
2773 error(1, errno
, "Can not read input firmware %s", input
);
2776 /* check if output directory exists */
2777 if (stat(output_directory
, &statbuf
)) {
2778 error(1, errno
, "Failed to stat output directory %s", output_directory
);
2781 if ((statbuf
.st_mode
& S_IFMT
) != S_IFDIR
) {
2782 error(1, errno
, "Given output directory is not a directory %s", output_directory
);
2785 input_file
= fopen(input
, "rb");
2787 if (read_partition_table(input_file
, firmware_offset
, entries
, 16, 0) != 0) {
2788 error(1, 0, "Error can not read the partition table (fwup-ptn)");
2791 for (size_t i
= 0; i
< max_entries
; i
++) {
2792 if (entries
[i
].name
== NULL
&&
2793 entries
[i
].base
== 0 &&
2794 entries
[i
].size
== 0)
2797 extract_firmware_partition(input_file
, firmware_offset
, &entries
[i
], output_directory
);
2803 static struct flash_partition_entry
*find_partition(
2804 struct flash_partition_entry
*entries
, size_t max_entries
,
2805 const char *name
, const char *error_msg
)
2807 for (size_t i
= 0; i
< max_entries
; i
++, entries
++) {
2808 if (strcmp(entries
->name
, name
) == 0)
2812 error(1, 0, "%s", error_msg
);
2816 static void write_ff(FILE *output_file
, size_t size
)
2821 memset(buf
, 0xff, sizeof(buf
));
2823 for (offset
= 0; offset
+ sizeof(buf
) < size
; offset
+= sizeof(buf
)) {
2824 if (fwrite(buf
, sizeof(buf
), 1, output_file
) != 1)
2825 error(1, errno
, "Can not write 0xff to output_file");
2828 /* write last chunk smaller than buffer */
2829 if (offset
< size
) {
2830 offset
= size
- offset
;
2831 if (fwrite(buf
, offset
, 1, output_file
) != 1)
2832 error(1, errno
, "Can not write partition to output_file");
2836 static void convert_firmware(const char *input
, const char *output
)
2838 struct flash_partition_entry fwup
[MAX_PARTITIONS
] = { 0 };
2839 struct flash_partition_entry flash
[MAX_PARTITIONS
] = { 0 };
2840 struct flash_partition_entry
*fwup_os_image
= NULL
, *fwup_file_system
= NULL
;
2841 struct flash_partition_entry
*flash_os_image
= NULL
, *flash_file_system
= NULL
;
2842 struct flash_partition_entry
*fwup_partition_table
= NULL
;
2843 size_t firmware_offset
= 0x1014;
2844 FILE *input_file
, *output_file
;
2846 struct stat statbuf
;
2848 /* check input file */
2849 if (stat(input
, &statbuf
)) {
2850 error(1, errno
, "Can not read input firmware %s", input
);
2853 input_file
= fopen(input
, "rb");
2855 error(1, 0, "Can not open input firmware %s", input
);
2857 output_file
= fopen(output
, "wb");
2859 error(1, 0, "Can not open output firmware %s", output
);
2861 if (read_partition_table(input_file
, firmware_offset
, fwup
, MAX_PARTITIONS
, 0) != 0) {
2862 error(1, 0, "Error can not read the partition table (fwup-ptn)");
2865 fwup_os_image
= find_partition(fwup
, MAX_PARTITIONS
,
2866 "os-image", "Error can not find os-image partition (fwup)");
2867 fwup_file_system
= find_partition(fwup
, MAX_PARTITIONS
,
2868 "file-system", "Error can not find file-system partition (fwup)");
2869 fwup_partition_table
= find_partition(fwup
, MAX_PARTITIONS
,
2870 "partition-table", "Error can not find partition-table partition");
2872 /* the flash partition table has a 0x00000004 magic haeder */
2873 if (read_partition_table(input_file
, firmware_offset
+ fwup_partition_table
->base
+ 4, flash
, MAX_PARTITIONS
, 1) != 0)
2874 error(1, 0, "Error can not read the partition table (flash)");
2876 flash_os_image
= find_partition(flash
, MAX_PARTITIONS
,
2877 "os-image", "Error can not find os-image partition (flash)");
2878 flash_file_system
= find_partition(flash
, MAX_PARTITIONS
,
2879 "file-system", "Error can not find file-system partition (flash)");
2881 /* write os_image to 0x0 */
2882 write_partition(input_file
, firmware_offset
, fwup_os_image
, output_file
);
2883 write_ff(output_file
, flash_os_image
->size
- fwup_os_image
->size
);
2885 /* write file-system behind os_image */
2886 fseek(output_file
, flash_file_system
->base
- flash_os_image
->base
, SEEK_SET
);
2887 write_partition(input_file
, firmware_offset
, fwup_file_system
, output_file
);
2888 write_ff(output_file
, flash_file_system
->size
- fwup_file_system
->size
);
2890 fclose(output_file
);
2894 int main(int argc
, char *argv
[]) {
2895 const char *board
= NULL
, *kernel_image
= NULL
, *rootfs_image
= NULL
, *output
= NULL
;
2896 const char *extract_image
= NULL
, *output_directory
= NULL
, *convert_image
= NULL
;
2897 bool add_jffs2_eof
= false, sysupgrade
= false;
2899 struct device_info
*info
;
2900 set_source_date_epoch();
2905 c
= getopt(argc
, argv
, "B:k:r:o:V:jSh:x:d:z:");
2915 kernel_image
= optarg
;
2919 rootfs_image
= optarg
;
2927 sscanf(optarg
, "r%u", &rev
);
2931 add_jffs2_eof
= true;
2943 output_directory
= optarg
;
2947 extract_image
= optarg
;
2951 convert_image
= optarg
;
2960 if (extract_image
|| output_directory
) {
2962 error(1, 0, "No factory/oem image given via -x <file>. Output directory is only valid with -x");
2963 if (!output_directory
)
2964 error(1, 0, "Can not extract an image without output directory. Use -d <dir>");
2965 extract_firmware(extract_image
, output_directory
);
2966 } else if (convert_image
) {
2968 error(1, 0, "Can not convert a factory/oem image into sysupgrade image without output file. Use -o <file>");
2969 convert_firmware(convert_image
, output
);
2972 error(1, 0, "no board has been specified");
2974 error(1, 0, "no kernel image has been specified");
2976 error(1, 0, "no rootfs image has been specified");
2978 error(1, 0, "no output filename has been specified");
2980 info
= find_board(board
);
2983 error(1, 0, "unsupported board %s", board
);
2985 build_image(output
, kernel_image
, rootfs_image
, rev
, add_jffs2_eof
, sysupgrade
, info
);