2 Copyright (c) 2014, Matthias Schiffer <mschiffer@universe-factory.net>
5 Redistribution and use in source and binary forms, with or without
6 modification, are permitted provided that the following conditions are met:
8 1. Redistributions of source code must retain the above copyright notice,
9 this list of conditions and the following disclaimer.
10 2. Redistributions in binary form must reproduce the above copyright notice,
11 this list of conditions and the following disclaimer in the documentation
12 and/or other materials provided with the distribution.
14 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
15 AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16 IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
17 DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
18 FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19 DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
20 SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
21 CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
22 OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
23 OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
30 Image generation tool for the TP-LINK SafeLoader as seen on
31 TP-LINK Pharos devices (CPE210/220/510/520)
47 #include <arpa/inet.h>
49 #include <sys/types.h>
56 #define ALIGN(x,a) ({ typeof(a) __a = (a); (((x) + __a - 1) & ~(__a - 1)); })
59 #define MAX_PARTITIONS 32
61 /** An image partition table entry */
62 struct image_partition_entry
{
68 /** A flash partition table entry */
69 struct flash_partition_entry
{
75 /** Partition trailing padding definitions
76 * Values 0x00 to 0xff are reserved to indicate the padding value
77 * Values from 0x100 are reserved to indicate other behaviour */
78 enum partition_trail_value
{
81 PART_TRAIL_MAX
= 0xff,
82 PART_TRAIL_NONE
= 0x100
85 /** Firmware layout description */
89 const char *support_list
;
90 enum partition_trail_value part_trail
;
92 uint32_t soft_ver_compat_level
;
93 struct flash_partition_entry partitions
[MAX_PARTITIONS
+1];
94 const char *first_sysupgrade_partition
;
95 const char *last_sysupgrade_partition
;
98 struct __attribute__((__packed__
)) meta_header
{
103 /** The content of the soft-version structure */
104 struct __attribute__((__packed__
)) soft_version
{
106 uint8_t version_major
;
107 uint8_t version_minor
;
108 uint8_t version_patch
;
114 uint32_t compat_level
;
118 static const uint8_t jffs2_eof_mark
[4] = {0xde, 0xad, 0xc0, 0xde};
122 Salt for the MD5 hash
124 Fortunately, TP-LINK seems to use the same salt for most devices which use
125 the new image format.
127 static const uint8_t md5_salt
[16] = {
128 0x7a, 0x2b, 0x15, 0xed,
129 0x9b, 0x98, 0x59, 0x6d,
130 0xe5, 0x04, 0xab, 0x44,
131 0xac, 0x2a, 0x9f, 0x4e,
135 /** Firmware layout table */
136 static struct device_info boards
[] = {
137 /** Firmware layout for the CPE210/220 V1 */
140 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
143 "CPE210(TP-LINK|UN|N300-2):1.0\r\n"
144 "CPE210(TP-LINK|UN|N300-2):1.1\r\n"
145 "CPE210(TP-LINK|US|N300-2):1.1\r\n"
146 "CPE210(TP-LINK|EU|N300-2):1.1\r\n"
147 "CPE220(TP-LINK|UN|N300-2):1.1\r\n"
148 "CPE220(TP-LINK|US|N300-2):1.1\r\n"
149 "CPE220(TP-LINK|EU|N300-2):1.1\r\n",
154 {"fs-uboot", 0x00000, 0x20000},
155 {"partition-table", 0x20000, 0x02000},
156 {"default-mac", 0x30000, 0x00020},
157 {"product-info", 0x31100, 0x00100},
158 {"signature", 0x32000, 0x00400},
159 {"os-image", 0x40000, 0x300000},
160 {"file-system", 0x340000, 0x470000},
161 {"soft-version", 0x7b0000, 0x00100},
162 {"support-list", 0x7b1000, 0x00400},
163 {"user-config", 0x7c0000, 0x10000},
164 {"default-config", 0x7d0000, 0x10000},
165 {"log", 0x7e0000, 0x10000},
166 {"radio", 0x7f0000, 0x10000},
170 .first_sysupgrade_partition
= "os-image",
171 .last_sysupgrade_partition
= "support-list",
174 /** Firmware layout for the CPE210 V2 */
177 .vendor
= "CPE210(TP-LINK|UN|N300-2|00000000):2.0\r\n",
180 "CPE210(TP-LINK|EU|N300-2|00000000):2.0\r\n"
181 "CPE210(TP-LINK|EU|N300-2|45550000):2.0\r\n"
182 "CPE210(TP-LINK|EU|N300-2|55530000):2.0\r\n"
183 "CPE210(TP-LINK|UN|N300-2|00000000):2.0\r\n"
184 "CPE210(TP-LINK|UN|N300-2|45550000):2.0\r\n"
185 "CPE210(TP-LINK|UN|N300-2|55530000):2.0\r\n"
186 "CPE210(TP-LINK|US|N300-2|55530000):2.0\r\n"
187 "CPE210(TP-LINK|UN|N300-2):2.0\r\n"
188 "CPE210(TP-LINK|EU|N300-2):2.0\r\n"
189 "CPE210(TP-LINK|US|N300-2):2.0\r\n",
194 {"fs-uboot", 0x00000, 0x20000},
195 {"partition-table", 0x20000, 0x02000},
196 {"default-mac", 0x30000, 0x00020},
197 {"product-info", 0x31100, 0x00100},
198 {"device-info", 0x31400, 0x00400},
199 {"signature", 0x32000, 0x00400},
200 {"device-id", 0x33000, 0x00100},
201 {"firmware", 0x40000, 0x770000},
202 {"soft-version", 0x7b0000, 0x00100},
203 {"support-list", 0x7b1000, 0x01000},
204 {"user-config", 0x7c0000, 0x10000},
205 {"default-config", 0x7d0000, 0x10000},
206 {"log", 0x7e0000, 0x10000},
207 {"radio", 0x7f0000, 0x10000},
211 .first_sysupgrade_partition
= "os-image",
212 .last_sysupgrade_partition
= "support-list",
215 /** Firmware layout for the CPE210 V3 */
218 .vendor
= "CPE210(TP-LINK|UN|N300-2|00000000):3.0\r\n",
221 "CPE210(TP-LINK|EU|N300-2|45550000):3.0\r\n"
222 "CPE210(TP-LINK|UN|N300-2|00000000):3.0\r\n"
223 "CPE210(TP-LINK|US|N300-2|55530000):3.0\r\n"
224 "CPE210(TP-LINK|UN|N300-2):3.0\r\n"
225 "CPE210(TP-LINK|EU|N300-2):3.0\r\n"
226 "CPE210(TP-LINK|EU|N300-2|45550000):3.1\r\n"
227 "CPE210(TP-LINK|UN|N300-2|00000000):3.1\r\n"
228 "CPE210(TP-LINK|US|N300-2|55530000):3.1\r\n"
229 "CPE210(TP-LINK|EU|N300-2|45550000):3.20\r\n"
230 "CPE210(TP-LINK|UN|N300-2|00000000):3.20\r\n"
231 "CPE210(TP-LINK|US|N300-2|55530000):3.20\r\n",
236 {"fs-uboot", 0x00000, 0x20000},
237 {"partition-table", 0x20000, 0x01000},
238 {"default-mac", 0x30000, 0x00020},
239 {"product-info", 0x31100, 0x00100},
240 {"device-info", 0x31400, 0x00400},
241 {"signature", 0x32000, 0x00400},
242 {"device-id", 0x33000, 0x00100},
243 {"firmware", 0x40000, 0x770000},
244 {"soft-version", 0x7b0000, 0x00100},
245 {"support-list", 0x7b1000, 0x01000},
246 {"user-config", 0x7c0000, 0x10000},
247 {"default-config", 0x7d0000, 0x10000},
248 {"log", 0x7e0000, 0x10000},
249 {"radio", 0x7f0000, 0x10000},
253 .first_sysupgrade_partition
= "os-image",
254 .last_sysupgrade_partition
= "support-list",
257 /** Firmware layout for the CPE220 V2 */
260 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
263 "CPE220(TP-LINK|EU|N300-2|00000000):2.0\r\n"
264 "CPE220(TP-LINK|EU|N300-2|45550000):2.0\r\n"
265 "CPE220(TP-LINK|EU|N300-2|55530000):2.0\r\n"
266 "CPE220(TP-LINK|UN|N300-2|00000000):2.0\r\n"
267 "CPE220(TP-LINK|UN|N300-2|45550000):2.0\r\n"
268 "CPE220(TP-LINK|UN|N300-2|55530000):2.0\r\n"
269 "CPE220(TP-LINK|US|N300-2|55530000):2.0\r\n"
270 "CPE220(TP-LINK|UN|N300-2):2.0\r\n"
271 "CPE220(TP-LINK|EU|N300-2):2.0\r\n"
272 "CPE220(TP-LINK|US|N300-2):2.0\r\n",
277 {"fs-uboot", 0x00000, 0x20000},
278 {"partition-table", 0x20000, 0x02000},
279 {"default-mac", 0x30000, 0x00020},
280 {"product-info", 0x31100, 0x00100},
281 {"signature", 0x32000, 0x00400},
282 {"os-image", 0x40000, 0x300000},
283 {"file-system", 0x340000, 0x470000},
284 {"soft-version", 0x7b0000, 0x00100},
285 {"support-list", 0x7b1000, 0x00400},
286 {"user-config", 0x7c0000, 0x10000},
287 {"default-config", 0x7d0000, 0x10000},
288 {"log", 0x7e0000, 0x10000},
289 {"radio", 0x7f0000, 0x10000},
293 .first_sysupgrade_partition
= "os-image",
294 .last_sysupgrade_partition
= "support-list",
297 /** Firmware layout for the CPE220 V3 */
300 .vendor
= "CPE220(TP-LINK|UN|N300-2|00000000):3.0\r\n",
303 "CPE220(TP-LINK|EU|N300-2|00000000):3.0\r\n"
304 "CPE220(TP-LINK|EU|N300-2|45550000):3.0\r\n"
305 "CPE220(TP-LINK|EU|N300-2|55530000):3.0\r\n"
306 "CPE220(TP-LINK|UN|N300-2|00000000):3.0\r\n"
307 "CPE220(TP-LINK|UN|N300-2|45550000):3.0\r\n"
308 "CPE220(TP-LINK|UN|N300-2|55530000):3.0\r\n"
309 "CPE220(TP-LINK|US|N300-2|55530000):3.0\r\n"
310 "CPE220(TP-LINK|UN|N300-2):3.0\r\n"
311 "CPE220(TP-LINK|EU|N300-2):3.0\r\n"
312 "CPE220(TP-LINK|US|N300-2):3.0\r\n",
317 {"fs-uboot", 0x00000, 0x20000},
318 {"partition-table", 0x20000, 0x02000},
319 {"default-mac", 0x30000, 0x00020},
320 {"product-info", 0x31100, 0x00100},
321 {"device-info", 0x31400, 0x00400},
322 {"signature", 0x32000, 0x00400},
323 {"device-id", 0x33000, 0x00100},
324 {"firmware", 0x40000, 0x770000},
325 {"soft-version", 0x7b0000, 0x00100},
326 {"support-list", 0x7b1000, 0x01000},
327 {"user-config", 0x7c0000, 0x10000},
328 {"default-config", 0x7d0000, 0x10000},
329 {"log", 0x7e0000, 0x10000},
330 {"radio", 0x7f0000, 0x10000},
334 .first_sysupgrade_partition
= "os-image",
335 .last_sysupgrade_partition
= "support-list",
338 /** Firmware layout for the CPE510/520 V1 */
341 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
344 "CPE510(TP-LINK|UN|N300-5):1.0\r\n"
345 "CPE510(TP-LINK|UN|N300-5):1.1\r\n"
346 "CPE510(TP-LINK|UN|N300-5):1.1\r\n"
347 "CPE510(TP-LINK|US|N300-5):1.1\r\n"
348 "CPE510(TP-LINK|EU|N300-5):1.1\r\n"
349 "CPE520(TP-LINK|UN|N300-5):1.1\r\n"
350 "CPE520(TP-LINK|US|N300-5):1.1\r\n"
351 "CPE520(TP-LINK|EU|N300-5):1.1\r\n",
356 {"fs-uboot", 0x00000, 0x20000},
357 {"partition-table", 0x20000, 0x02000},
358 {"default-mac", 0x30000, 0x00020},
359 {"product-info", 0x31100, 0x00100},
360 {"signature", 0x32000, 0x00400},
361 {"os-image", 0x40000, 0x300000},
362 {"file-system", 0x340000, 0x470000},
363 {"soft-version", 0x7b0000, 0x00100},
364 {"support-list", 0x7b1000, 0x00400},
365 {"user-config", 0x7c0000, 0x10000},
366 {"default-config", 0x7d0000, 0x10000},
367 {"log", 0x7e0000, 0x10000},
368 {"radio", 0x7f0000, 0x10000},
372 .first_sysupgrade_partition
= "os-image",
373 .last_sysupgrade_partition
= "support-list",
376 /** Firmware layout for the CPE510 V2 */
379 .vendor
= "CPE510(TP-LINK|UN|N300-5):2.0\r\n",
382 "CPE510(TP-LINK|EU|N300-5|00000000):2.0\r\n"
383 "CPE510(TP-LINK|EU|N300-5|45550000):2.0\r\n"
384 "CPE510(TP-LINK|EU|N300-5|55530000):2.0\r\n"
385 "CPE510(TP-LINK|UN|N300-5|00000000):2.0\r\n"
386 "CPE510(TP-LINK|UN|N300-5|45550000):2.0\r\n"
387 "CPE510(TP-LINK|UN|N300-5|55530000):2.0\r\n"
388 "CPE510(TP-LINK|US|N300-5|00000000):2.0\r\n"
389 "CPE510(TP-LINK|US|N300-5|45550000):2.0\r\n"
390 "CPE510(TP-LINK|US|N300-5|55530000):2.0\r\n"
391 "CPE510(TP-LINK|UN|N300-5):2.0\r\n"
392 "CPE510(TP-LINK|EU|N300-5):2.0\r\n"
393 "CPE510(TP-LINK|US|N300-5):2.0\r\n",
398 {"fs-uboot", 0x00000, 0x20000},
399 {"partition-table", 0x20000, 0x02000},
400 {"default-mac", 0x30000, 0x00020},
401 {"product-info", 0x31100, 0x00100},
402 {"signature", 0x32000, 0x00400},
403 {"os-image", 0x40000, 0x300000},
404 {"file-system", 0x340000, 0x470000},
405 {"soft-version", 0x7b0000, 0x00100},
406 {"support-list", 0x7b1000, 0x00400},
407 {"user-config", 0x7c0000, 0x10000},
408 {"default-config", 0x7d0000, 0x10000},
409 {"log", 0x7e0000, 0x10000},
410 {"radio", 0x7f0000, 0x10000},
414 .first_sysupgrade_partition
= "os-image",
415 .last_sysupgrade_partition
= "support-list",
418 /** Firmware layout for the CPE510 V3 */
421 .vendor
= "CPE510(TP-LINK|UN|N300-5):3.0\r\n",
424 "CPE510(TP-LINK|EU|N300-5|00000000):3.0\r\n"
425 "CPE510(TP-LINK|EU|N300-5|45550000):3.0\r\n"
426 "CPE510(TP-LINK|EU|N300-5|55530000):3.0\r\n"
427 "CPE510(TP-LINK|UN|N300-5|00000000):3.0\r\n"
428 "CPE510(TP-LINK|UN|N300-5|45550000):3.0\r\n"
429 "CPE510(TP-LINK|UN|N300-5|55530000):3.0\r\n"
430 "CPE510(TP-LINK|US|N300-5|00000000):3.0\r\n"
431 "CPE510(TP-LINK|US|N300-5|45550000):3.0\r\n"
432 "CPE510(TP-LINK|US|N300-5|55530000):3.0\r\n"
433 "CPE510(TP-LINK|UN|N300-5):3.0\r\n"
434 "CPE510(TP-LINK|EU|N300-5):3.0\r\n"
435 "CPE510(TP-LINK|US|N300-5):3.0\r\n"
436 "CPE510(TP-LINK|UN|N300-5|00000000):3.20\r\n"
437 "CPE510(TP-LINK|US|N300-5|55530000):3.20\r\n"
438 "CPE510(TP-LINK|EU|N300-5|45550000):3.20\r\n",
443 {"fs-uboot", 0x00000, 0x20000},
444 {"partition-table", 0x20000, 0x02000},
445 {"default-mac", 0x30000, 0x00020},
446 {"product-info", 0x31100, 0x00100},
447 {"signature", 0x32000, 0x00400},
448 {"os-image", 0x40000, 0x300000},
449 {"file-system", 0x340000, 0x470000},
450 {"soft-version", 0x7b0000, 0x00100},
451 {"support-list", 0x7b1000, 0x00400},
452 {"user-config", 0x7c0000, 0x10000},
453 {"default-config", 0x7d0000, 0x10000},
454 {"log", 0x7e0000, 0x10000},
455 {"radio", 0x7f0000, 0x10000},
459 .first_sysupgrade_partition
= "os-image",
460 .last_sysupgrade_partition
= "support-list",
463 /** Firmware layout for the CPE610V1 */
466 .vendor
= "CPE610(TP-LINK|UN|N300-5|00000000):1.0\r\n",
469 "CPE610(TP-LINK|EU|N300-5|00000000):1.0\r\n"
470 "CPE610(TP-LINK|EU|N300-5|45550000):1.0\r\n"
471 "CPE610(TP-LINK|EU|N300-5|55530000):1.0\r\n"
472 "CPE610(TP-LINK|UN|N300-5|00000000):1.0\r\n"
473 "CPE610(TP-LINK|UN|N300-5|45550000):1.0\r\n"
474 "CPE610(TP-LINK|UN|N300-5|55530000):1.0\r\n"
475 "CPE610(TP-LINK|US|N300-5|55530000):1.0\r\n"
476 "CPE610(TP-LINK|UN|N300-5):1.0\r\n"
477 "CPE610(TP-LINK|EU|N300-5):1.0\r\n"
478 "CPE610(TP-LINK|US|N300-5):1.0\r\n",
483 {"fs-uboot", 0x00000, 0x20000},
484 {"partition-table", 0x20000, 0x02000},
485 {"default-mac", 0x30000, 0x00020},
486 {"product-info", 0x31100, 0x00100},
487 {"signature", 0x32000, 0x00400},
488 {"os-image", 0x40000, 0x300000},
489 {"file-system", 0x340000, 0x470000},
490 {"soft-version", 0x7b0000, 0x00100},
491 {"support-list", 0x7b1000, 0x00400},
492 {"user-config", 0x7c0000, 0x10000},
493 {"default-config", 0x7d0000, 0x10000},
494 {"log", 0x7e0000, 0x10000},
495 {"radio", 0x7f0000, 0x10000},
499 .first_sysupgrade_partition
= "os-image",
500 .last_sysupgrade_partition
= "support-list",
503 /** Firmware layout for the CPE610V2 */
506 .vendor
= "CPE610(TP-LINK|UN|N300-5|00000000):2.0\r\n",
509 "CPE610(TP-LINK|EU|N300-5|00000000):2.0\r\n"
510 "CPE610(TP-LINK|EU|N300-5|45550000):2.0\r\n"
511 "CPE610(TP-LINK|EU|N300-5|55530000):2.0\r\n"
512 "CPE610(TP-LINK|UN|N300-5|00000000):2.0\r\n"
513 "CPE610(TP-LINK|UN|N300-5|45550000):2.0\r\n"
514 "CPE610(TP-LINK|UN|N300-5|55530000):2.0\r\n"
515 "CPE610(TP-LINK|US|N300-5|55530000):2.0\r\n"
516 "CPE610(TP-LINK|UN|N300-5):2.0\r\n"
517 "CPE610(TP-LINK|EU|N300-5):2.0\r\n"
518 "CPE610(TP-LINK|US|N300-5):2.0\r\n",
523 {"fs-uboot", 0x00000, 0x20000},
524 {"partition-table", 0x20000, 0x02000},
525 {"default-mac", 0x30000, 0x00020},
526 {"product-info", 0x31100, 0x00100},
527 {"signature", 0x32000, 0x00400},
528 {"os-image", 0x40000, 0x300000},
529 {"file-system", 0x340000, 0x470000},
530 {"soft-version", 0x7b0000, 0x00100},
531 {"support-list", 0x7b1000, 0x00400},
532 {"user-config", 0x7c0000, 0x10000},
533 {"default-config", 0x7d0000, 0x10000},
534 {"log", 0x7e0000, 0x10000},
535 {"radio", 0x7f0000, 0x10000},
539 .first_sysupgrade_partition
= "os-image",
540 .last_sysupgrade_partition
= "support-list",
545 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
548 "WBS210(TP-LINK|UN|N300-2):1.20\r\n"
549 "WBS210(TP-LINK|US|N300-2):1.20\r\n"
550 "WBS210(TP-LINK|EU|N300-2):1.20\r\n",
555 {"fs-uboot", 0x00000, 0x20000},
556 {"partition-table", 0x20000, 0x02000},
557 {"default-mac", 0x30000, 0x00020},
558 {"product-info", 0x31100, 0x00100},
559 {"signature", 0x32000, 0x00400},
560 {"os-image", 0x40000, 0x300000},
561 {"file-system", 0x340000, 0x470000},
562 {"soft-version", 0x7b0000, 0x00100},
563 {"support-list", 0x7b1000, 0x00400},
564 {"user-config", 0x7c0000, 0x10000},
565 {"default-config", 0x7d0000, 0x10000},
566 {"log", 0x7e0000, 0x10000},
567 {"radio", 0x7f0000, 0x10000},
571 .first_sysupgrade_partition
= "os-image",
572 .last_sysupgrade_partition
= "support-list",
577 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
580 "WBS210(TP-LINK|UN|N300-2|00000000):2.0\r\n"
581 "WBS210(TP-LINK|US|N300-2|55530000):2.0\r\n"
582 "WBS210(TP-LINK|EU|N300-2|45550000):2.0\r\n",
587 {"fs-uboot", 0x00000, 0x20000},
588 {"partition-table", 0x20000, 0x02000},
589 {"default-mac", 0x30000, 0x00020},
590 {"product-info", 0x31100, 0x00100},
591 {"signature", 0x32000, 0x00400},
592 {"os-image", 0x40000, 0x300000},
593 {"file-system", 0x340000, 0x470000},
594 {"soft-version", 0x7b0000, 0x00100},
595 {"support-list", 0x7b1000, 0x00400},
596 {"user-config", 0x7c0000, 0x10000},
597 {"default-config", 0x7d0000, 0x10000},
598 {"log", 0x7e0000, 0x10000},
599 {"radio", 0x7f0000, 0x10000},
603 .first_sysupgrade_partition
= "os-image",
604 .last_sysupgrade_partition
= "support-list",
609 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
612 "WBS510(TP-LINK|UN|N300-5):1.20\r\n"
613 "WBS510(TP-LINK|US|N300-5):1.20\r\n"
614 "WBS510(TP-LINK|EU|N300-5):1.20\r\n"
615 "WBS510(TP-LINK|CA|N300-5):1.20\r\n",
620 {"fs-uboot", 0x00000, 0x20000},
621 {"partition-table", 0x20000, 0x02000},
622 {"default-mac", 0x30000, 0x00020},
623 {"product-info", 0x31100, 0x00100},
624 {"signature", 0x32000, 0x00400},
625 {"os-image", 0x40000, 0x300000},
626 {"file-system", 0x340000, 0x470000},
627 {"soft-version", 0x7b0000, 0x00100},
628 {"support-list", 0x7b1000, 0x00400},
629 {"user-config", 0x7c0000, 0x10000},
630 {"default-config", 0x7d0000, 0x10000},
631 {"log", 0x7e0000, 0x10000},
632 {"radio", 0x7f0000, 0x10000},
636 .first_sysupgrade_partition
= "os-image",
637 .last_sysupgrade_partition
= "support-list",
642 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
645 "WBS510(TP-LINK|UN|N300-5|00000000):2.0\r\n"
646 "WBS510(TP-LINK|US|N300-5|55530000):2.0\r\n"
647 "WBS510(TP-LINK|EU|N300-5|45550000):2.0\r\n"
648 "WBS510(TP-LINK|CA|N300-5|43410000):2.0\r\n",
653 {"fs-uboot", 0x00000, 0x20000},
654 {"partition-table", 0x20000, 0x02000},
655 {"default-mac", 0x30000, 0x00020},
656 {"product-info", 0x31100, 0x00100},
657 {"signature", 0x32000, 0x00400},
658 {"os-image", 0x40000, 0x300000},
659 {"file-system", 0x340000, 0x470000},
660 {"soft-version", 0x7b0000, 0x00100},
661 {"support-list", 0x7b1000, 0x00400},
662 {"user-config", 0x7c0000, 0x10000},
663 {"default-config", 0x7d0000, 0x10000},
664 {"log", 0x7e0000, 0x10000},
665 {"radio", 0x7f0000, 0x10000},
669 .first_sysupgrade_partition
= "os-image",
670 .last_sysupgrade_partition
= "support-list",
673 /** Firmware layout for the AD7200 */
679 "{product_name:AD7200,product_ver:1.0.0,special_id:00000000}\r\n",
684 {"SBL1", 0x00000, 0x20000},
685 {"MIBIB", 0x20000, 0x20000},
686 {"SBL2", 0x40000, 0x20000},
687 {"SBL3", 0x60000, 0x30000},
688 {"DDRCONFIG", 0x90000, 0x10000},
689 {"SSD", 0xa0000, 0x10000},
690 {"TZ", 0xb0000, 0x30000},
691 {"RPM", 0xe0000, 0x20000},
692 {"fs-uboot", 0x100000, 0x70000},
693 {"uboot-env", 0x170000, 0x40000},
694 {"radio", 0x1b0000, 0x40000},
695 {"os-image", 0x1f0000, 0x400000},
696 {"file-system", 0x5f0000, 0x1900000},
697 {"default-mac", 0x1ef0000, 0x00200},
698 {"pin", 0x1ef0200, 0x00200},
699 {"device-id", 0x1ef0400, 0x00200},
700 {"product-info", 0x1ef0600, 0x0fa00},
701 {"partition-table", 0x1f00000, 0x10000},
702 {"soft-version", 0x1f10000, 0x10000},
703 {"support-list", 0x1f20000, 0x10000},
704 {"profile", 0x1f30000, 0x10000},
705 {"default-config", 0x1f40000, 0x10000},
706 {"user-config", 0x1f50000, 0x40000},
707 {"qos-db", 0x1f90000, 0x40000},
708 {"usb-config", 0x1fd0000, 0x10000},
709 {"log", 0x1fe0000, 0x20000},
713 .first_sysupgrade_partition
= "os-image",
714 .last_sysupgrade_partition
= "file-system"
717 /** Firmware layout for the C2600 */
723 "{product_name:Archer C2600,product_ver:1.0.0,special_id:00000000}\r\n",
728 We use a bigger os-image partition than the stock images (and thus
729 smaller file-system), as our kernel doesn't fit in the stock firmware's
730 2 MB os-image since kernel 4.14.
733 {"SBL1", 0x00000, 0x20000},
734 {"MIBIB", 0x20000, 0x20000},
735 {"SBL2", 0x40000, 0x20000},
736 {"SBL3", 0x60000, 0x30000},
737 {"DDRCONFIG", 0x90000, 0x10000},
738 {"SSD", 0xa0000, 0x10000},
739 {"TZ", 0xb0000, 0x30000},
740 {"RPM", 0xe0000, 0x20000},
741 {"fs-uboot", 0x100000, 0x70000},
742 {"uboot-env", 0x170000, 0x40000},
743 {"radio", 0x1b0000, 0x40000},
744 {"os-image", 0x1f0000, 0x400000}, /* Stock: base 0x1f0000 size 0x200000 */
745 {"file-system", 0x5f0000, 0x1900000}, /* Stock: base 0x3f0000 size 0x1b00000 */
746 {"default-mac", 0x1ef0000, 0x00200},
747 {"pin", 0x1ef0200, 0x00200},
748 {"product-info", 0x1ef0400, 0x0fc00},
749 {"partition-table", 0x1f00000, 0x10000},
750 {"soft-version", 0x1f10000, 0x10000},
751 {"support-list", 0x1f20000, 0x10000},
752 {"profile", 0x1f30000, 0x10000},
753 {"default-config", 0x1f40000, 0x10000},
754 {"user-config", 0x1f50000, 0x40000},
755 {"qos-db", 0x1f90000, 0x40000},
756 {"usb-config", 0x1fd0000, 0x10000},
757 {"log", 0x1fe0000, 0x20000},
761 .first_sysupgrade_partition
= "os-image",
762 .last_sysupgrade_partition
= "file-system"
765 /** Firmware layout for the A7-V5 */
767 .id
= "ARCHER-A7-V5",
770 "{product_name:Archer A7,product_ver:5.0.0,special_id:45550000}\n"
771 "{product_name:Archer A7,product_ver:5.0.0,special_id:55530000}\n"
772 "{product_name:Archer A7,product_ver:5.0.0,special_id:43410000}\n"
773 "{product_name:Archer A7,product_ver:5.0.0,special_id:4A500000}\n"
774 "{product_name:Archer A7,product_ver:5.0.0,special_id:54570000}\n"
775 "{product_name:Archer A7,product_ver:5.0.0,special_id:52550000}\n",
777 .soft_ver
= "soft_ver:1.0.0\n",
779 /* We're using a dynamic kernel/rootfs split here */
781 {"factory-boot", 0x00000, 0x20000},
782 {"fs-uboot", 0x20000, 0x20000},
783 {"firmware", 0x40000, 0xec0000}, /* Stock: name os-image base 0x40000 size 0x120000 */
784 /* Stock: name file-system base 0x160000 size 0xda0000 */
785 {"default-mac", 0xf40000, 0x00200},
786 {"pin", 0xf40200, 0x00200},
787 {"device-id", 0xf40400, 0x00100},
788 {"product-info", 0xf40500, 0x0fb00},
789 {"soft-version", 0xf50000, 0x00100},
790 {"extra-para", 0xf51000, 0x01000},
791 {"support-list", 0xf52000, 0x0a000},
792 {"profile", 0xf5c000, 0x04000},
793 {"default-config", 0xf60000, 0x10000},
794 {"user-config", 0xf70000, 0x40000},
795 {"certificate", 0xfb0000, 0x10000},
796 {"partition-table", 0xfc0000, 0x10000},
797 {"log", 0xfd0000, 0x20000},
798 {"radio", 0xff0000, 0x10000},
802 .first_sysupgrade_partition
= "os-image",
803 .last_sysupgrade_partition
= "file-system",
806 /** Firmware layout for the C2v3 */
808 .id
= "ARCHER-C2-V3",
811 "{product_name:ArcherC2,product_ver:3.0.0,special_id:00000000}\n"
812 "{product_name:ArcherC2,product_ver:3.0.0,special_id:55530000}\n"
813 "{product_name:ArcherC2,product_ver:3.0.0,special_id:45550000}\n",
815 .soft_ver
= "soft_ver:3.0.1\n",
817 /** We're using a dynamic kernel/rootfs split here */
820 {"factory-boot", 0x00000, 0x20000},
821 {"fs-uboot", 0x20000, 0x10000},
822 {"firmware", 0x30000, 0x7a0000},
823 {"user-config", 0x7d0000, 0x04000},
824 {"default-mac", 0x7e0000, 0x00100},
825 {"device-id", 0x7e0100, 0x00100},
826 {"extra-para", 0x7e0200, 0x00100},
827 {"pin", 0x7e0300, 0x00100},
828 {"support-list", 0x7e0400, 0x00400},
829 {"soft-version", 0x7e0800, 0x00400},
830 {"product-info", 0x7e0c00, 0x01400},
831 {"partition-table", 0x7e2000, 0x01000},
832 {"profile", 0x7e3000, 0x01000},
833 {"default-config", 0x7e4000, 0x04000},
834 {"merge-config", 0x7ec000, 0x02000},
835 {"qos-db", 0x7ee000, 0x02000},
836 {"radio", 0x7f0000, 0x10000},
840 .first_sysupgrade_partition
= "os-image",
841 .last_sysupgrade_partition
= "file-system",
844 /** Firmware layout for the C25v1 */
846 .id
= "ARCHER-C25-V1",
849 "{product_name:ArcherC25,product_ver:1.0.0,special_id:00000000}\n"
850 "{product_name:ArcherC25,product_ver:1.0.0,special_id:55530000}\n"
851 "{product_name:ArcherC25,product_ver:1.0.0,special_id:45550000}\n",
853 .soft_ver
= "soft_ver:1.0.0\n",
855 /* We're using a dynamic kernel/rootfs split here */
857 {"factory-boot", 0x00000, 0x20000},
858 {"fs-uboot", 0x20000, 0x10000},
859 {"firmware", 0x30000, 0x7a0000}, /* Stock: name os-image base 0x30000 size 0x100000 */
860 /* Stock: name file-system base 0x130000 size 0x6a0000 */
861 {"user-config", 0x7d0000, 0x04000},
862 {"default-mac", 0x7e0000, 0x00100},
863 {"device-id", 0x7e0100, 0x00100},
864 {"extra-para", 0x7e0200, 0x00100},
865 {"pin", 0x7e0300, 0x00100},
866 {"support-list", 0x7e0400, 0x00400},
867 {"soft-version", 0x7e0800, 0x00400},
868 {"product-info", 0x7e0c00, 0x01400},
869 {"partition-table", 0x7e2000, 0x01000},
870 {"profile", 0x7e3000, 0x01000},
871 {"default-config", 0x7e4000, 0x04000},
872 {"merge-config", 0x7ec000, 0x02000},
873 {"qos-db", 0x7ee000, 0x02000},
874 {"radio", 0x7f0000, 0x10000},
878 .first_sysupgrade_partition
= "os-image",
879 .last_sysupgrade_partition
= "file-system",
882 /** Firmware layout for the C58v1 */
884 .id
= "ARCHER-C58-V1",
888 "{product_name:Archer C58,product_ver:1.0.0,special_id:00000000}\r\n"
889 "{product_name:Archer C58,product_ver:1.0.0,special_id:45550000}\r\n"
890 "{product_name:Archer C58,product_ver:1.0.0,special_id:55530000}\r\n",
892 .soft_ver
= "soft_ver:1.0.0\n",
895 {"fs-uboot", 0x00000, 0x10000},
896 {"default-mac", 0x10000, 0x00200},
897 {"pin", 0x10200, 0x00200},
898 {"product-info", 0x10400, 0x00100},
899 {"partition-table", 0x10500, 0x00800},
900 {"soft-version", 0x11300, 0x00200},
901 {"support-list", 0x11500, 0x00100},
902 {"device-id", 0x11600, 0x00100},
903 {"profile", 0x11700, 0x03900},
904 {"default-config", 0x15000, 0x04000},
905 {"user-config", 0x19000, 0x04000},
906 {"firmware", 0x20000, 0x7c8000},
907 {"certyficate", 0x7e8000, 0x08000},
908 {"radio", 0x7f0000, 0x10000},
912 .first_sysupgrade_partition
= "os-image",
913 .last_sysupgrade_partition
= "file-system",
916 /** Firmware layout for the C59v1 */
918 .id
= "ARCHER-C59-V1",
922 "{product_name:Archer C59,product_ver:1.0.0,special_id:00000000}\r\n"
923 "{product_name:Archer C59,product_ver:1.0.0,special_id:45550000}\r\n"
924 "{product_name:Archer C59,product_ver:1.0.0,special_id:52550000}\r\n"
925 "{product_name:Archer C59,product_ver:1.0.0,special_id:55530000}\r\n",
927 .soft_ver
= "soft_ver:1.0.0\n",
929 /* We're using a dynamic kernel/rootfs split here */
931 {"fs-uboot", 0x00000, 0x10000},
932 {"default-mac", 0x10000, 0x00200},
933 {"pin", 0x10200, 0x00200},
934 {"device-id", 0x10400, 0x00100},
935 {"product-info", 0x10500, 0x0fb00},
936 {"firmware", 0x20000, 0xe30000},
937 {"partition-table", 0xe50000, 0x10000},
938 {"soft-version", 0xe60000, 0x10000},
939 {"support-list", 0xe70000, 0x10000},
940 {"profile", 0xe80000, 0x10000},
941 {"default-config", 0xe90000, 0x10000},
942 {"user-config", 0xea0000, 0x40000},
943 {"usb-config", 0xee0000, 0x10000},
944 {"certificate", 0xef0000, 0x10000},
945 {"qos-db", 0xf00000, 0x40000},
946 {"log", 0xfe0000, 0x10000},
947 {"radio", 0xff0000, 0x10000},
951 .first_sysupgrade_partition
= "os-image",
952 .last_sysupgrade_partition
= "file-system",
955 /** Firmware layout for the C59v2 */
957 .id
= "ARCHER-C59-V2",
961 "{product_name:Archer C59,product_ver:2.0.0,special_id:00000000}\r\n"
962 "{product_name:Archer C59,product_ver:2.0.0,special_id:45550000}\r\n"
963 "{product_name:Archer C59,product_ver:2.0.0,special_id:55530000}\r\n",
965 .soft_ver
= "soft_ver:2.0.0 Build 20161206 rel.7303\n",
967 /** We're using a dynamic kernel/rootfs split here */
969 {"factory-boot", 0x00000, 0x20000},
970 {"fs-uboot", 0x20000, 0x10000},
971 {"default-mac", 0x30000, 0x00200},
972 {"pin", 0x30200, 0x00200},
973 {"device-id", 0x30400, 0x00100},
974 {"product-info", 0x30500, 0x0fb00},
975 {"firmware", 0x40000, 0xe10000},
976 {"partition-table", 0xe50000, 0x10000},
977 {"soft-version", 0xe60000, 0x10000},
978 {"support-list", 0xe70000, 0x10000},
979 {"profile", 0xe80000, 0x10000},
980 {"default-config", 0xe90000, 0x10000},
981 {"user-config", 0xea0000, 0x40000},
982 {"usb-config", 0xee0000, 0x10000},
983 {"certificate", 0xef0000, 0x10000},
984 {"extra-para", 0xf00000, 0x10000},
985 {"qos-db", 0xf10000, 0x30000},
986 {"log", 0xfe0000, 0x10000},
987 {"radio", 0xff0000, 0x10000},
991 .first_sysupgrade_partition
= "os-image",
992 .last_sysupgrade_partition
= "file-system",
995 /** Firmware layout for the Archer C6 v2 (EU/RU/JP) */
997 .id
= "ARCHER-C6-V2",
1001 "{product_name:Archer C6,product_ver:2.0.0,special_id:45550000}\r\n"
1002 "{product_name:Archer C6,product_ver:2.0.0,special_id:52550000}\r\n"
1003 "{product_name:Archer C6,product_ver:2.0.0,special_id:4A500000}\r\n",
1005 .soft_ver
= "soft_ver:1.9.1\n",
1008 {"fs-uboot", 0x00000, 0x20000},
1009 {"default-mac", 0x20000, 0x00200},
1010 {"pin", 0x20200, 0x00100},
1011 {"product-info", 0x20300, 0x00200},
1012 {"device-id", 0x20500, 0x0fb00},
1013 {"firmware", 0x30000, 0x7a9400},
1014 {"soft-version", 0x7d9400, 0x00100},
1015 {"extra-para", 0x7d9500, 0x00100},
1016 {"support-list", 0x7d9600, 0x00200},
1017 {"profile", 0x7d9800, 0x03000},
1018 {"default-config", 0x7dc800, 0x03000},
1019 {"partition-table", 0x7df800, 0x00800},
1020 {"user-config", 0x7e0000, 0x0c000},
1021 {"certificate", 0x7ec000, 0x04000},
1022 {"radio", 0x7f0000, 0x10000},
1026 .first_sysupgrade_partition
= "os-image",
1027 .last_sysupgrade_partition
= "file-system",
1030 /** Firmware layout for the Archer C6 v2 (US) and A6 v2 (US/TW) */
1032 .id
= "ARCHER-C6-V2-US",
1036 "{product_name:Archer A6,product_ver:2.0.0,special_id:55530000}\n"
1037 "{product_name:Archer A6,product_ver:2.0.0,special_id:54570000}\n"
1038 "{product_name:Archer C6,product_ver:2.0.0,special_id:55530000}\n",
1040 .soft_ver
= "soft_ver:1.9.1\n",
1043 {"factory-boot", 0x00000, 0x20000},
1044 {"default-mac", 0x20000, 0x00200},
1045 {"pin", 0x20200, 0x00100},
1046 {"product-info", 0x20300, 0x00200},
1047 {"device-id", 0x20500, 0x0fb00},
1048 {"fs-uboot", 0x30000, 0x20000},
1049 {"firmware", 0x50000, 0xf89400},
1050 {"soft-version", 0xfd9400, 0x00100},
1051 {"extra-para", 0xfd9500, 0x00100},
1052 {"support-list", 0xfd9600, 0x00200},
1053 {"profile", 0xfd9800, 0x03000},
1054 {"default-config", 0xfdc800, 0x03000},
1055 {"partition-table", 0xfdf800, 0x00800},
1056 {"user-config", 0xfe0000, 0x0c000},
1057 {"certificate", 0xfec000, 0x04000},
1058 {"radio", 0xff0000, 0x10000},
1061 .first_sysupgrade_partition
= "os-image",
1062 .last_sysupgrade_partition
= "file-system",
1064 /** Firmware layout for the Archer A6 v3 */
1066 .id
= "ARCHER-A6-V3",
1070 "{product_name:Archer A6,product_ver:3.0.0,special_id:55530000}\n"
1071 "{product_name:Archer A6,product_ver:3.0.0,special_id:54570000}\n",
1073 .soft_ver
= "soft_ver:1.0.5\n",
1076 {"fs-uboot", 0x00000, 0x40000},
1077 {"firmware", 0x40000, 0xf60000},
1078 {"default-mac", 0xfa0000, 0x00200},
1079 {"pin", 0xfa0200, 0x00100},
1080 {"device-id", 0xfa0300, 0x00100},
1081 {"product-info", 0xfa0400, 0x0fc00},
1082 {"default-config", 0xfb0000, 0x08000},
1083 {"ap-def-config", 0xfb8000, 0x08000},
1084 {"user-config", 0xfc0000, 0x0a000},
1085 {"ag-config", 0xfca000, 0x04000},
1086 {"certificate", 0xfce000, 0x02000},
1087 {"ap-config", 0xfd0000, 0x06000},
1088 {"router-config", 0xfd6000, 0x06000},
1089 {"favicon", 0xfdc000, 0x02000},
1090 {"logo", 0xfde000, 0x02000},
1091 {"partition-table", 0xfe0000, 0x00800},
1092 {"soft-version", 0xfe0800, 0x00100},
1093 {"support-list", 0xfe0900, 0x00200},
1094 {"profile", 0xfe0b00, 0x03000},
1095 {"extra-para", 0xfe3b00, 0x00100},
1096 {"radio", 0xff0000, 0x10000},
1099 .first_sysupgrade_partition
= "os-image",
1100 .last_sysupgrade_partition
= "file-system",
1102 /** Firmware layout for the C60v1 */
1104 .id
= "ARCHER-C60-V1",
1108 "{product_name:Archer C60,product_ver:1.0.0,special_id:00000000}\r\n"
1109 "{product_name:Archer C60,product_ver:1.0.0,special_id:45550000}\r\n"
1110 "{product_name:Archer C60,product_ver:1.0.0,special_id:55530000}\r\n",
1112 .soft_ver
= "soft_ver:1.0.0\n",
1115 {"fs-uboot", 0x00000, 0x10000},
1116 {"default-mac", 0x10000, 0x00200},
1117 {"pin", 0x10200, 0x00200},
1118 {"product-info", 0x10400, 0x00100},
1119 {"partition-table", 0x10500, 0x00800},
1120 {"soft-version", 0x11300, 0x00200},
1121 {"support-list", 0x11500, 0x00100},
1122 {"device-id", 0x11600, 0x00100},
1123 {"profile", 0x11700, 0x03900},
1124 {"default-config", 0x15000, 0x04000},
1125 {"user-config", 0x19000, 0x04000},
1126 {"firmware", 0x20000, 0x7c8000},
1127 {"certyficate", 0x7e8000, 0x08000},
1128 {"radio", 0x7f0000, 0x10000},
1132 .first_sysupgrade_partition
= "os-image",
1133 .last_sysupgrade_partition
= "file-system",
1136 /** Firmware layout for the C60v2 */
1138 .id
= "ARCHER-C60-V2",
1142 "{product_name:Archer C60,product_ver:2.0.0,special_id:42520000}\r\n"
1143 "{product_name:Archer C60,product_ver:2.0.0,special_id:45550000}\r\n"
1144 "{product_name:Archer C60,product_ver:2.0.0,special_id:55530000}\r\n",
1146 .soft_ver
= "soft_ver:2.0.0\n",
1149 {"factory-boot", 0x00000, 0x1fb00},
1150 {"default-mac", 0x1fb00, 0x00200},
1151 {"pin", 0x1fd00, 0x00100},
1152 {"product-info", 0x1fe00, 0x00100},
1153 {"device-id", 0x1ff00, 0x00100},
1154 {"fs-uboot", 0x20000, 0x10000},
1155 {"firmware", 0x30000, 0x7a0000},
1156 {"soft-version", 0x7d9500, 0x00100},
1157 {"support-list", 0x7d9600, 0x00100},
1158 {"extra-para", 0x7d9700, 0x00100},
1159 {"profile", 0x7d9800, 0x03000},
1160 {"default-config", 0x7dc800, 0x03000},
1161 {"partition-table", 0x7df800, 0x00800},
1162 {"user-config", 0x7e0000, 0x0c000},
1163 {"certificate", 0x7ec000, 0x04000},
1164 {"radio", 0x7f0000, 0x10000},
1168 .first_sysupgrade_partition
= "os-image",
1169 .last_sysupgrade_partition
= "file-system",
1172 /** Firmware layout for the C60v3 */
1174 .id
= "ARCHER-C60-V3",
1178 "{product_name:Archer C60,product_ver:3.0.0,special_id:42520000}\r\n"
1179 "{product_name:Archer C60,product_ver:3.0.0,special_id:45550000}\r\n"
1180 "{product_name:Archer C60,product_ver:3.0.0,special_id:55530000}\r\n",
1182 .soft_ver
= "soft_ver:3.0.0\n",
1185 {"factory-boot", 0x00000, 0x1fb00},
1186 {"default-mac", 0x1fb00, 0x00200},
1187 {"pin", 0x1fd00, 0x00100},
1188 {"product-info", 0x1fe00, 0x00100},
1189 {"device-id", 0x1ff00, 0x00100},
1190 {"fs-uboot", 0x20000, 0x10000},
1191 {"firmware", 0x30000, 0x7a0000},
1192 {"soft-version", 0x7d9500, 0x00100},
1193 {"support-list", 0x7d9600, 0x00100},
1194 {"extra-para", 0x7d9700, 0x00100},
1195 {"profile", 0x7d9800, 0x03000},
1196 {"default-config", 0x7dc800, 0x03000},
1197 {"partition-table", 0x7df800, 0x00800},
1198 {"user-config", 0x7e0000, 0x0c000},
1199 {"certificate", 0x7ec000, 0x04000},
1200 {"radio", 0x7f0000, 0x10000},
1204 .first_sysupgrade_partition
= "os-image",
1205 .last_sysupgrade_partition
= "file-system",
1208 /** Firmware layout for the C5 */
1210 .id
= "ARCHER-C5-V2",
1214 "{product_name:ArcherC5,product_ver:2.0.0,special_id:00000000}\r\n"
1215 "{product_name:ArcherC5,product_ver:2.0.0,special_id:55530000}\r\n"
1216 "{product_name:ArcherC5,product_ver:2.0.0,special_id:4A500000}\r\n", /* JP version */
1221 {"fs-uboot", 0x00000, 0x40000},
1222 {"os-image", 0x40000, 0x200000},
1223 {"file-system", 0x240000, 0xc00000},
1224 {"default-mac", 0xe40000, 0x00200},
1225 {"pin", 0xe40200, 0x00200},
1226 {"product-info", 0xe40400, 0x00200},
1227 {"partition-table", 0xe50000, 0x10000},
1228 {"soft-version", 0xe60000, 0x00200},
1229 {"support-list", 0xe61000, 0x0f000},
1230 {"profile", 0xe70000, 0x10000},
1231 {"default-config", 0xe80000, 0x10000},
1232 {"user-config", 0xe90000, 0x50000},
1233 {"log", 0xee0000, 0x100000},
1234 {"radio_bk", 0xfe0000, 0x10000},
1235 {"radio", 0xff0000, 0x10000},
1239 .first_sysupgrade_partition
= "os-image",
1240 .last_sysupgrade_partition
= "file-system"
1243 /** Firmware layout for the C7 */
1245 .id
= "ARCHER-C7-V4",
1248 "{product_name:Archer C7,product_ver:4.0.0,special_id:00000000}\n"
1249 "{product_name:Archer C7,product_ver:4.0.0,special_id:41550000}\n"
1250 "{product_name:Archer C7,product_ver:4.0.0,special_id:45550000}\n"
1251 "{product_name:Archer C7,product_ver:4.0.0,special_id:4B520000}\n"
1252 "{product_name:Archer C7,product_ver:4.0.0,special_id:42520000}\n"
1253 "{product_name:Archer C7,product_ver:4.0.0,special_id:4A500000}\n"
1254 "{product_name:Archer C7,product_ver:4.0.0,special_id:52550000}\n"
1255 "{product_name:Archer C7,product_ver:4.0.0,special_id:54570000}\n"
1256 "{product_name:Archer C7,product_ver:4.0.0,special_id:55530000}\n"
1257 "{product_name:Archer C7,product_ver:4.0.0,special_id:43410000}\n",
1259 .soft_ver
= "soft_ver:1.0.0\n",
1261 /* We're using a dynamic kernel/rootfs split here */
1263 {"factory-boot", 0x00000, 0x20000},
1264 {"fs-uboot", 0x20000, 0x20000},
1265 {"firmware", 0x40000, 0xEC0000}, /* Stock: name os-image base 0x40000 size 0x120000 */
1266 /* Stock: name file-system base 0x160000 size 0xda0000 */
1267 {"default-mac", 0xf00000, 0x00200},
1268 {"pin", 0xf00200, 0x00200},
1269 {"device-id", 0xf00400, 0x00100},
1270 {"product-info", 0xf00500, 0x0fb00},
1271 {"soft-version", 0xf10000, 0x00100},
1272 {"extra-para", 0xf11000, 0x01000},
1273 {"support-list", 0xf12000, 0x0a000},
1274 {"profile", 0xf1c000, 0x04000},
1275 {"default-config", 0xf20000, 0x10000},
1276 {"user-config", 0xf30000, 0x40000},
1277 {"qos-db", 0xf70000, 0x40000},
1278 {"certificate", 0xfb0000, 0x10000},
1279 {"partition-table", 0xfc0000, 0x10000},
1280 {"log", 0xfd0000, 0x20000},
1281 {"radio", 0xff0000, 0x10000},
1285 .first_sysupgrade_partition
= "os-image",
1286 .last_sysupgrade_partition
= "file-system",
1289 /** Firmware layout for the C7 v5*/
1291 .id
= "ARCHER-C7-V5",
1294 "{product_name:Archer C7,product_ver:5.0.0,special_id:00000000}\n"
1295 "{product_name:Archer C7,product_ver:5.0.0,special_id:45550000}\n"
1296 "{product_name:Archer C7,product_ver:5.0.0,special_id:55530000}\n"
1297 "{product_name:Archer C7,product_ver:5.0.0,special_id:43410000}\n"
1298 "{product_name:Archer C7,product_ver:5.0.0,special_id:4A500000}\n"
1299 "{product_name:Archer C7,product_ver:5.0.0,special_id:54570000}\n"
1300 "{product_name:Archer C7,product_ver:5.0.0,special_id:52550000}\n"
1301 "{product_name:Archer C7,product_ver:5.0.0,special_id:4B520000}\n",
1304 .soft_ver
= "soft_ver:7.0.0\n",
1306 /* We're using a dynamic kernel/rootfs split here */
1308 {"factory-boot", 0x00000, 0x20000},
1309 {"fs-uboot", 0x20000, 0x20000},
1310 {"partition-table", 0x40000, 0x10000},
1311 {"radio", 0x50000, 0x10000},
1312 {"default-mac", 0x60000, 0x00200},
1313 {"pin", 0x60200, 0x00200},
1314 {"device-id", 0x60400, 0x00100},
1315 {"product-info", 0x60500, 0x0fb00},
1316 {"soft-version", 0x70000, 0x01000},
1317 {"extra-para", 0x71000, 0x01000},
1318 {"support-list", 0x72000, 0x0a000},
1319 {"profile", 0x7c000, 0x04000},
1320 {"user-config", 0x80000, 0x40000},
1323 {"firmware", 0xc0000, 0xf00000}, /* Stock: name os-image base 0xc0000 size 0x120000 */
1324 /* Stock: name file-system base 0x1e0000 size 0xde0000 */
1326 {"log", 0xfc0000, 0x20000},
1327 {"certificate", 0xfe0000, 0x10000},
1328 {"default-config", 0xff0000, 0x10000},
1333 .first_sysupgrade_partition
= "os-image",
1334 .last_sysupgrade_partition
= "file-system",
1337 /** Firmware layout for the C9 */
1343 "{product_name:ArcherC9,"
1344 "product_ver:1.0.0,"
1345 "special_id:00000000}\n",
1350 {"fs-uboot", 0x00000, 0x40000},
1351 {"os-image", 0x40000, 0x200000},
1352 {"file-system", 0x240000, 0xc00000},
1353 {"default-mac", 0xe40000, 0x00200},
1354 {"pin", 0xe40200, 0x00200},
1355 {"product-info", 0xe40400, 0x00200},
1356 {"partition-table", 0xe50000, 0x10000},
1357 {"soft-version", 0xe60000, 0x00200},
1358 {"support-list", 0xe61000, 0x0f000},
1359 {"profile", 0xe70000, 0x10000},
1360 {"default-config", 0xe80000, 0x10000},
1361 {"user-config", 0xe90000, 0x50000},
1362 {"log", 0xee0000, 0x100000},
1363 {"radio_bk", 0xfe0000, 0x10000},
1364 {"radio", 0xff0000, 0x10000},
1368 .first_sysupgrade_partition
= "os-image",
1369 .last_sysupgrade_partition
= "file-system"
1372 /** Firmware layout for the EAP120 */
1375 .vendor
= "EAP120(TP-LINK|UN|N300-2):1.0\r\n",
1378 "EAP120(TP-LINK|UN|N300-2):1.0\r\n",
1383 {"fs-uboot", 0x00000, 0x20000},
1384 {"partition-table", 0x20000, 0x02000},
1385 {"default-mac", 0x30000, 0x00020},
1386 {"support-list", 0x31000, 0x00100},
1387 {"product-info", 0x31100, 0x00100},
1388 {"soft-version", 0x32000, 0x00100},
1389 {"os-image", 0x40000, 0x180000},
1390 {"file-system", 0x1c0000, 0x600000},
1391 {"user-config", 0x7c0000, 0x10000},
1392 {"backup-config", 0x7d0000, 0x10000},
1393 {"log", 0x7e0000, 0x10000},
1394 {"radio", 0x7f0000, 0x10000},
1398 .first_sysupgrade_partition
= "os-image",
1399 .last_sysupgrade_partition
= "file-system"
1402 /** Firmware layout for the EAP225-Outdoor v1 */
1404 .id
= "EAP225-OUTDOOR-V1",
1407 "EAP225-Outdoor(TP-Link|UN|AC1200-D):1.0\r\n",
1408 .part_trail
= PART_TRAIL_NONE
,
1410 .soft_ver_compat_level
= 1,
1413 {"fs-uboot", 0x00000, 0x20000},
1414 {"partition-table", 0x20000, 0x02000},
1415 {"default-mac", 0x30000, 0x01000},
1416 {"support-list", 0x31000, 0x00100},
1417 {"product-info", 0x31100, 0x00400},
1418 {"soft-version", 0x32000, 0x00100},
1419 {"firmware", 0x40000, 0xd80000},
1420 {"user-config", 0xdc0000, 0x30000},
1421 {"mutil-log", 0xf30000, 0x80000},
1422 {"oops", 0xfb0000, 0x40000},
1423 {"radio", 0xff0000, 0x10000},
1427 .first_sysupgrade_partition
= "os-image",
1428 .last_sysupgrade_partition
= "file-system"
1431 /** Firmware layout for the EAP225 v3 */
1436 "EAP225(TP-Link|UN|AC1350-D):3.0\r\n",
1437 .part_trail
= PART_TRAIL_NONE
,
1439 .soft_ver_compat_level
= 1,
1442 {"fs-uboot", 0x00000, 0x20000},
1443 {"partition-table", 0x20000, 0x02000},
1444 {"default-mac", 0x30000, 0x01000},
1445 {"support-list", 0x31000, 0x00100},
1446 {"product-info", 0x31100, 0x00400},
1447 {"soft-version", 0x32000, 0x00100},
1448 {"firmware", 0x40000, 0xd80000},
1449 {"user-config", 0xdc0000, 0x30000},
1450 {"mutil-log", 0xf30000, 0x80000},
1451 {"oops", 0xfb0000, 0x40000},
1452 {"radio", 0xff0000, 0x10000},
1456 .first_sysupgrade_partition
= "os-image",
1457 .last_sysupgrade_partition
= "file-system"
1460 /** Firmware layout for the EAP225-Wall v2 */
1462 .id
= "EAP225-WALL-V2",
1465 "EAP225-Wall(TP-Link|UN|AC1200-D):2.0\r\n",
1466 .part_trail
= PART_TRAIL_NONE
,
1468 .soft_ver_compat_level
= 1,
1471 {"fs-uboot", 0x00000, 0x20000},
1472 {"partition-table", 0x20000, 0x02000},
1473 {"default-mac", 0x30000, 0x01000},
1474 {"support-list", 0x31000, 0x00100},
1475 {"product-info", 0x31100, 0x00400},
1476 {"soft-version", 0x32000, 0x00100},
1477 {"firmware", 0x40000, 0xd80000},
1478 {"user-config", 0xdc0000, 0x30000},
1479 {"mutil-log", 0xf30000, 0x80000},
1480 {"oops", 0xfb0000, 0x40000},
1481 {"radio", 0xff0000, 0x10000},
1485 .first_sysupgrade_partition
= "os-image",
1486 .last_sysupgrade_partition
= "file-system"
1489 /** Firmware layout for the EAP235-Wall v1 */
1491 .id
= "EAP235-WALL-V1",
1494 "EAP235-Wall(TP-Link|UN|AC1200-D):1.0\r\n",
1495 .part_trail
= PART_TRAIL_NONE
,
1497 .soft_ver_compat_level
= 1,
1500 {"fs-uboot", 0x00000, 0x80000},
1501 {"partition-table", 0x80000, 0x02000},
1502 {"default-mac", 0x90000, 0x01000},
1503 {"support-list", 0x91000, 0x00100},
1504 {"product-info", 0x91100, 0x00400},
1505 {"soft-version", 0x92000, 0x00100},
1506 {"firmware", 0xa0000, 0xd20000},
1507 {"user-config", 0xdc0000, 0x30000},
1508 {"mutil-log", 0xf30000, 0x80000},
1509 {"oops", 0xfb0000, 0x40000},
1510 {"radio", 0xff0000, 0x10000},
1514 .first_sysupgrade_partition
= "os-image",
1515 .last_sysupgrade_partition
= "file-system"
1518 /** Firmware layout for the EAP245 v1 */
1523 "EAP245(TP-LINK|UN|AC1750-D):1.0\r\n",
1524 .part_trail
= PART_TRAIL_NONE
,
1528 {"fs-uboot", 0x00000, 0x20000},
1529 {"partition-table", 0x20000, 0x02000},
1530 {"default-mac", 0x30000, 0x01000},
1531 {"support-list", 0x31000, 0x00100},
1532 {"product-info", 0x31100, 0x00400},
1533 {"soft-version", 0x32000, 0x00100},
1534 {"firmware", 0x40000, 0xd80000},
1535 {"user-config", 0xdc0000, 0x30000},
1536 {"radio", 0xff0000, 0x10000},
1540 .first_sysupgrade_partition
= "os-image",
1541 .last_sysupgrade_partition
= "file-system"
1544 /** Firmware layout for the EAP245 v3 */
1549 "EAP245(TP-Link|UN|AC1750-D):3.0\r\n",
1550 .part_trail
= PART_TRAIL_NONE
,
1552 .soft_ver_compat_level
= 1,
1554 /** Firmware partition with dynamic kernel/rootfs split */
1556 {"factroy-boot", 0x00000, 0x40000},
1557 {"fs-uboot", 0x40000, 0x40000},
1558 {"partition-table", 0x80000, 0x10000},
1559 {"default-mac", 0x90000, 0x01000},
1560 {"support-list", 0x91000, 0x00100},
1561 {"product-info", 0x91100, 0x00400},
1562 {"soft-version", 0x92000, 0x00100},
1563 {"radio", 0xa0000, 0x10000},
1564 {"extra-para", 0xb0000, 0x10000},
1565 {"firmware", 0xc0000, 0xe40000},
1566 {"config", 0xf00000, 0x30000},
1567 {"mutil-log", 0xf30000, 0x80000},
1568 {"oops", 0xfb0000, 0x40000},
1572 .first_sysupgrade_partition
= "os-image",
1573 .last_sysupgrade_partition
= "file-system"
1576 /** Firmware layout for the TL-WA850RE v2 */
1578 .id
= "TLWA850REV2",
1582 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:55530000}\n"
1583 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:00000000}\n"
1584 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:55534100}\n"
1585 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:45550000}\n"
1586 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:4B520000}\n"
1587 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:42520000}\n"
1588 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:4A500000}\n"
1589 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:43410000}\n"
1590 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:41550000}\n"
1591 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:52550000}\n",
1596 576KB were moved from file-system to os-image
1597 in comparison to the stock image
1600 {"fs-uboot", 0x00000, 0x20000},
1601 {"firmware", 0x20000, 0x390000},
1602 {"partition-table", 0x3b0000, 0x02000},
1603 {"default-mac", 0x3c0000, 0x00020},
1604 {"pin", 0x3c0100, 0x00020},
1605 {"product-info", 0x3c1000, 0x01000},
1606 {"soft-version", 0x3c2000, 0x00100},
1607 {"support-list", 0x3c3000, 0x01000},
1608 {"profile", 0x3c4000, 0x08000},
1609 {"user-config", 0x3d0000, 0x10000},
1610 {"default-config", 0x3e0000, 0x10000},
1611 {"radio", 0x3f0000, 0x10000},
1615 .first_sysupgrade_partition
= "os-image",
1616 .last_sysupgrade_partition
= "file-system"
1619 /** Firmware layout for the TL-WA855RE v1 */
1621 .id
= "TLWA855REV1",
1625 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:00000000}\n"
1626 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:55530000}\n"
1627 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:45550000}\n"
1628 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:4B520000}\n"
1629 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:42520000}\n"
1630 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:4A500000}\n"
1631 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:43410000}\n"
1632 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:41550000}\n"
1633 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:52550000}\n",
1638 {"fs-uboot", 0x00000, 0x20000},
1639 {"os-image", 0x20000, 0x150000},
1640 {"file-system", 0x170000, 0x240000},
1641 {"partition-table", 0x3b0000, 0x02000},
1642 {"default-mac", 0x3c0000, 0x00020},
1643 {"pin", 0x3c0100, 0x00020},
1644 {"product-info", 0x3c1000, 0x01000},
1645 {"soft-version", 0x3c2000, 0x00100},
1646 {"support-list", 0x3c3000, 0x01000},
1647 {"profile", 0x3c4000, 0x08000},
1648 {"user-config", 0x3d0000, 0x10000},
1649 {"default-config", 0x3e0000, 0x10000},
1650 {"radio", 0x3f0000, 0x10000},
1654 .first_sysupgrade_partition
= "os-image",
1655 .last_sysupgrade_partition
= "file-system"
1658 /** Firmware layout for the TL-WPA8630P v2 (EU)*/
1660 .id
= "TL-WPA8630P-V2.0-EU",
1664 "{product_name:TL-WPA8630P,product_ver:2.0.0,special_id:45550000}\n",
1669 {"factory-uboot", 0x00000, 0x20000},
1670 {"fs-uboot", 0x20000, 0x20000},
1671 {"firmware", 0x40000, 0x5e0000},
1672 {"partition-table", 0x620000, 0x02000},
1673 {"default-mac", 0x630000, 0x00020},
1674 {"pin", 0x630100, 0x00020},
1675 {"device-id", 0x630200, 0x00030},
1676 {"product-info", 0x631100, 0x01000},
1677 {"extra-para", 0x632100, 0x01000},
1678 {"soft-version", 0x640000, 0x01000},
1679 {"support-list", 0x641000, 0x01000},
1680 {"profile", 0x642000, 0x08000},
1681 {"user-config", 0x650000, 0x10000},
1682 {"default-config", 0x660000, 0x10000},
1683 {"default-nvm", 0x670000, 0xc0000},
1684 {"default-pib", 0x730000, 0x40000},
1685 {"radio", 0x7f0000, 0x10000},
1689 .first_sysupgrade_partition
= "os-image",
1690 .last_sysupgrade_partition
= "file-system"
1693 /** Firmware layout for the TL-WPA8630P v2 (INT)*/
1695 .id
= "TL-WPA8630P-V2-INT",
1699 "{product_name:TL-WPA8630P,product_ver:2.0.0,special_id:41550000}\n"
1700 "{product_name:TL-WPA8630P,product_ver:2.0.0,special_id:44450000}\n"
1701 "{product_name:TL-WPA8630P,product_ver:2.1.0,special_id:41550000}\n",
1706 {"factory-uboot", 0x00000, 0x20000},
1707 {"fs-uboot", 0x20000, 0x20000},
1708 {"firmware", 0x40000, 0x5e0000},
1709 {"partition-table", 0x620000, 0x02000},
1710 {"extra-para", 0x632100, 0x01000},
1711 {"soft-version", 0x640000, 0x01000},
1712 {"support-list", 0x641000, 0x01000},
1713 {"profile", 0x642000, 0x08000},
1714 {"user-config", 0x650000, 0x10000},
1715 {"default-config", 0x660000, 0x10000},
1716 {"default-nvm", 0x670000, 0xc0000},
1717 {"default-pib", 0x730000, 0x40000},
1718 {"default-mac", 0x7e0000, 0x00020},
1719 {"pin", 0x7e0100, 0x00020},
1720 {"device-id", 0x7e0200, 0x00030},
1721 {"product-info", 0x7e1100, 0x01000},
1722 {"radio", 0x7f0000, 0x10000},
1726 .first_sysupgrade_partition
= "os-image",
1727 .last_sysupgrade_partition
= "file-system"
1730 /** Firmware layout for the TL-WPA8630P v2.1 (EU)*/
1732 .id
= "TL-WPA8630P-V2.1-EU",
1736 "{product_name:TL-WPA8630P,product_ver:2.1.0,special_id:45550000}\n",
1741 {"factory-uboot", 0x00000, 0x20000},
1742 {"fs-uboot", 0x20000, 0x20000},
1743 {"firmware", 0x40000, 0x5e0000},
1744 {"extra-para", 0x680000, 0x01000},
1745 {"product-info", 0x690000, 0x01000},
1746 {"partition-table", 0x6a0000, 0x02000},
1747 {"soft-version", 0x6b0000, 0x01000},
1748 {"support-list", 0x6b1000, 0x01000},
1749 {"profile", 0x6b2000, 0x08000},
1750 {"user-config", 0x6c0000, 0x10000},
1751 {"default-config", 0x6d0000, 0x10000},
1752 {"default-nvm", 0x6e0000, 0xc0000},
1753 {"default-pib", 0x7a0000, 0x40000},
1754 {"default-mac", 0x7e0000, 0x00020},
1755 {"pin", 0x7e0100, 0x00020},
1756 {"device-id", 0x7e0200, 0x00030},
1757 {"radio", 0x7f0000, 0x10000},
1761 .first_sysupgrade_partition
= "os-image",
1762 .last_sysupgrade_partition
= "file-system"
1765 /** Firmware layout for the TL-WR1043 v5 */
1767 .id
= "TLWR1043NV5",
1771 "{product_name:TL-WR1043N,product_ver:5.0.0,special_id:45550000}\n"
1772 "{product_name:TL-WR1043N,product_ver:5.0.0,special_id:55530000}\n",
1774 .soft_ver
= "soft_ver:1.0.0\n",
1776 {"factory-boot", 0x00000, 0x20000},
1777 {"fs-uboot", 0x20000, 0x20000},
1778 {"firmware", 0x40000, 0xec0000},
1779 {"default-mac", 0xf00000, 0x00200},
1780 {"pin", 0xf00200, 0x00200},
1781 {"device-id", 0xf00400, 0x00100},
1782 {"product-info", 0xf00500, 0x0fb00},
1783 {"soft-version", 0xf10000, 0x01000},
1784 {"extra-para", 0xf11000, 0x01000},
1785 {"support-list", 0xf12000, 0x0a000},
1786 {"profile", 0xf1c000, 0x04000},
1787 {"default-config", 0xf20000, 0x10000},
1788 {"user-config", 0xf30000, 0x40000},
1789 {"qos-db", 0xf70000, 0x40000},
1790 {"certificate", 0xfb0000, 0x10000},
1791 {"partition-table", 0xfc0000, 0x10000},
1792 {"log", 0xfd0000, 0x20000},
1793 {"radio", 0xff0000, 0x10000},
1796 .first_sysupgrade_partition
= "os-image",
1797 .last_sysupgrade_partition
= "file-system"
1800 /** Firmware layout for the TL-WR1043 v4 */
1802 .id
= "TLWR1043NDV4",
1806 "{product_name:TL-WR1043ND,product_ver:4.0.0,special_id:45550000}\n",
1810 /* We're using a dynamic kernel/rootfs split here */
1812 {"fs-uboot", 0x00000, 0x20000},
1813 {"firmware", 0x20000, 0xf30000},
1814 {"default-mac", 0xf50000, 0x00200},
1815 {"pin", 0xf50200, 0x00200},
1816 {"product-info", 0xf50400, 0x0fc00},
1817 {"soft-version", 0xf60000, 0x0b000},
1818 {"support-list", 0xf6b000, 0x04000},
1819 {"profile", 0xf70000, 0x04000},
1820 {"default-config", 0xf74000, 0x0b000},
1821 {"user-config", 0xf80000, 0x40000},
1822 {"partition-table", 0xfc0000, 0x10000},
1823 {"log", 0xfd0000, 0x20000},
1824 {"radio", 0xff0000, 0x10000},
1828 .first_sysupgrade_partition
= "os-image",
1829 .last_sysupgrade_partition
= "file-system"
1832 /** Firmware layout for the TL-WR902AC v1 */
1834 .id
= "TL-WR902AC-V1",
1838 "{product_name:TL-WR902AC,product_ver:1.0.0,special_id:45550000}\n"
1839 "{product_name:TL-WR902AC,product_ver:1.0.0,special_id:55530000}\n",
1844 384KB were moved from file-system to os-image
1845 in comparison to the stock image
1848 {"fs-uboot", 0x00000, 0x20000},
1849 {"firmware", 0x20000, 0x730000},
1850 {"default-mac", 0x750000, 0x00200},
1851 {"pin", 0x750200, 0x00200},
1852 {"product-info", 0x750400, 0x0fc00},
1853 {"soft-version", 0x760000, 0x0b000},
1854 {"support-list", 0x76b000, 0x04000},
1855 {"profile", 0x770000, 0x04000},
1856 {"default-config", 0x774000, 0x0b000},
1857 {"user-config", 0x780000, 0x40000},
1858 {"partition-table", 0x7c0000, 0x10000},
1859 {"log", 0x7d0000, 0x20000},
1860 {"radio", 0x7f0000, 0x10000},
1864 .first_sysupgrade_partition
= "os-image",
1865 .last_sysupgrade_partition
= "file-system",
1868 /** Firmware layout for the TL-WR942N V1 */
1874 "{product_name:TL-WR942N,product_ver:1.0.0,special_id:00000000}\r\n"
1875 "{product_name:TL-WR942N,product_ver:1.0.0,special_id:52550000}\r\n",
1880 {"fs-uboot", 0x00000, 0x20000},
1881 {"firmware", 0x20000, 0xe20000},
1882 {"default-mac", 0xe40000, 0x00200},
1883 {"pin", 0xe40200, 0x00200},
1884 {"product-info", 0xe40400, 0x0fc00},
1885 {"partition-table", 0xe50000, 0x10000},
1886 {"soft-version", 0xe60000, 0x10000},
1887 {"support-list", 0xe70000, 0x10000},
1888 {"profile", 0xe80000, 0x10000},
1889 {"default-config", 0xe90000, 0x10000},
1890 {"user-config", 0xea0000, 0x40000},
1891 {"qos-db", 0xee0000, 0x40000},
1892 {"certificate", 0xf20000, 0x10000},
1893 {"usb-config", 0xfb0000, 0x10000},
1894 {"log", 0xfc0000, 0x20000},
1895 {"radio-bk", 0xfe0000, 0x10000},
1896 {"radio", 0xff0000, 0x10000},
1900 .first_sysupgrade_partition
= "os-image",
1901 .last_sysupgrade_partition
= "file-system",
1904 /** Firmware layout for the RE200 v2 */
1910 "{product_name:RE200,product_ver:2.0.0,special_id:00000000}\n"
1911 "{product_name:RE200,product_ver:2.0.0,special_id:41520000}\n"
1912 "{product_name:RE200,product_ver:2.0.0,special_id:41550000}\n"
1913 "{product_name:RE200,product_ver:2.0.0,special_id:42520000}\n"
1914 "{product_name:RE200,product_ver:2.0.0,special_id:43410000}\n"
1915 "{product_name:RE200,product_ver:2.0.0,special_id:45530000}\n"
1916 "{product_name:RE200,product_ver:2.0.0,special_id:45550000}\n"
1917 "{product_name:RE200,product_ver:2.0.0,special_id:49440000}\n"
1918 "{product_name:RE200,product_ver:2.0.0,special_id:4a500000}\n"
1919 "{product_name:RE200,product_ver:2.0.0,special_id:4b520000}\n"
1920 "{product_name:RE200,product_ver:2.0.0,special_id:52550000}\n"
1921 "{product_name:RE200,product_ver:2.0.0,special_id:54570000}\n"
1922 "{product_name:RE200,product_ver:2.0.0,special_id:55530000}\n",
1927 {"fs-uboot", 0x00000, 0x20000},
1928 {"firmware", 0x20000, 0x7a0000},
1929 {"partition-table", 0x7c0000, 0x02000},
1930 {"default-mac", 0x7c2000, 0x00020},
1931 {"pin", 0x7c2100, 0x00020},
1932 {"product-info", 0x7c3100, 0x01000},
1933 {"soft-version", 0x7c4200, 0x01000},
1934 {"support-list", 0x7c5200, 0x01000},
1935 {"profile", 0x7c6200, 0x08000},
1936 {"config-info", 0x7ce200, 0x00400},
1937 {"user-config", 0x7d0000, 0x10000},
1938 {"default-config", 0x7e0000, 0x10000},
1939 {"radio", 0x7f0000, 0x10000},
1943 .first_sysupgrade_partition
= "os-image",
1944 .last_sysupgrade_partition
= "file-system"
1947 /** Firmware layout for the RE200 v3 */
1953 "{product_name:RE200,product_ver:3.0.0,special_id:00000000}\n"
1954 "{product_name:RE200,product_ver:3.0.0,special_id:41520000}\n"
1955 "{product_name:RE200,product_ver:3.0.0,special_id:41550000}\n"
1956 "{product_name:RE200,product_ver:3.0.0,special_id:42520000}\n"
1957 "{product_name:RE200,product_ver:3.0.0,special_id:43410000}\n"
1958 "{product_name:RE200,product_ver:3.0.0,special_id:45470000}\n"
1959 "{product_name:RE200,product_ver:3.0.0,special_id:45530000}\n"
1960 "{product_name:RE200,product_ver:3.0.0,special_id:45550000}\n"
1961 "{product_name:RE200,product_ver:3.0.0,special_id:49440000}\n"
1962 "{product_name:RE200,product_ver:3.0.0,special_id:4A500000}\n"
1963 "{product_name:RE200,product_ver:3.0.0,special_id:4B520000}\n"
1964 "{product_name:RE200,product_ver:3.0.0,special_id:52550000}\n"
1965 "{product_name:RE200,product_ver:3.0.0,special_id:54570000}\n"
1966 "{product_name:RE200,product_ver:3.0.0,special_id:55530000}\n",
1971 {"fs-uboot", 0x00000, 0x20000},
1972 {"firmware", 0x20000, 0x7a0000},
1973 {"partition-table", 0x7c0000, 0x02000},
1974 {"default-mac", 0x7c2000, 0x00020},
1975 {"pin", 0x7c2100, 0x00020},
1976 {"product-info", 0x7c3100, 0x01000},
1977 {"soft-version", 0x7c4200, 0x01000},
1978 {"support-list", 0x7c5200, 0x01000},
1979 {"profile", 0x7c6200, 0x08000},
1980 {"config-info", 0x7ce200, 0x00400},
1981 {"user-config", 0x7d0000, 0x10000},
1982 {"default-config", 0x7e0000, 0x10000},
1983 {"radio", 0x7f0000, 0x10000},
1987 .first_sysupgrade_partition
= "os-image",
1988 .last_sysupgrade_partition
= "file-system"
1991 /** Firmware layout for the RE200 v4 */
1997 "{product_name:RE200,product_ver:4.0.0,special_id:00000000}\n"
1998 "{product_name:RE200,product_ver:4.0.0,special_id:45550000}\n"
1999 "{product_name:RE200,product_ver:4.0.0,special_id:4A500000}\n"
2000 "{product_name:RE200,product_ver:4.0.0,special_id:4B520000}\n"
2001 "{product_name:RE200,product_ver:4.0.0,special_id:43410000}\n"
2002 "{product_name:RE200,product_ver:4.0.0,special_id:41550000}\n"
2003 "{product_name:RE200,product_ver:4.0.0,special_id:42520000}\n"
2004 "{product_name:RE200,product_ver:4.0.0,special_id:55530000}\n"
2005 "{product_name:RE200,product_ver:4.0.0,special_id:41520000}\n"
2006 "{product_name:RE200,product_ver:4.0.0,special_id:52550000}\n"
2007 "{product_name:RE200,product_ver:4.0.0,special_id:54570000}\n"
2008 "{product_name:RE200,product_ver:4.0.0,special_id:45530000}\n"
2009 "{product_name:RE200,product_ver:4.0.0,special_id:49440000}\n"
2010 "{product_name:RE200,product_ver:4.0.0,special_id:45470000}\n",
2012 .soft_ver
= "soft_ver:1.1.0\n",
2015 {"fs-uboot", 0x00000, 0x20000},
2016 {"firmware", 0x20000, 0x7a0000},
2017 {"partition-table", 0x7c0000, 0x02000},
2018 {"default-mac", 0x7c2000, 0x00020},
2019 {"pin", 0x7c2100, 0x00020},
2020 {"product-info", 0x7c3100, 0x01000},
2021 {"soft-version", 0x7c4200, 0x01000},
2022 {"support-list", 0x7c5200, 0x01000},
2023 {"profile", 0x7c6200, 0x08000},
2024 {"config-info", 0x7ce200, 0x00400},
2025 {"user-config", 0x7d0000, 0x10000},
2026 {"default-config", 0x7e0000, 0x10000},
2027 {"radio", 0x7f0000, 0x10000},
2031 .first_sysupgrade_partition
= "os-image",
2032 .last_sysupgrade_partition
= "file-system"
2035 /** Firmware layout for the RE220 v2 */
2041 "{product_name:RE220,product_ver:2.0.0,special_id:00000000}\n"
2042 "{product_name:RE220,product_ver:2.0.0,special_id:41520000}\n"
2043 "{product_name:RE220,product_ver:2.0.0,special_id:41550000}\n"
2044 "{product_name:RE220,product_ver:2.0.0,special_id:42520000}\n"
2045 "{product_name:RE220,product_ver:2.0.0,special_id:43410000}\n"
2046 "{product_name:RE220,product_ver:2.0.0,special_id:45530000}\n"
2047 "{product_name:RE220,product_ver:2.0.0,special_id:45550000}\n"
2048 "{product_name:RE220,product_ver:2.0.0,special_id:49440000}\n"
2049 "{product_name:RE220,product_ver:2.0.0,special_id:4a500000}\n"
2050 "{product_name:RE220,product_ver:2.0.0,special_id:4b520000}\n"
2051 "{product_name:RE220,product_ver:2.0.0,special_id:52550000}\n"
2052 "{product_name:RE220,product_ver:2.0.0,special_id:54570000}\n"
2053 "{product_name:RE220,product_ver:2.0.0,special_id:55530000}\n",
2058 {"fs-uboot", 0x00000, 0x20000},
2059 {"firmware", 0x20000, 0x7a0000},
2060 {"partition-table", 0x7c0000, 0x02000},
2061 {"default-mac", 0x7c2000, 0x00020},
2062 {"pin", 0x7c2100, 0x00020},
2063 {"product-info", 0x7c3100, 0x01000},
2064 {"soft-version", 0x7c4200, 0x01000},
2065 {"support-list", 0x7c5200, 0x01000},
2066 {"profile", 0x7c6200, 0x08000},
2067 {"config-info", 0x7ce200, 0x00400},
2068 {"user-config", 0x7d0000, 0x10000},
2069 {"default-config", 0x7e0000, 0x10000},
2070 {"radio", 0x7f0000, 0x10000},
2074 .first_sysupgrade_partition
= "os-image",
2075 .last_sysupgrade_partition
= "file-system"
2078 /** Firmware layout for the RE305 v1 */
2084 "{product_name:RE305,product_ver:1.0.0,special_id:45550000}\n"
2085 "{product_name:RE305,product_ver:1.0.0,special_id:55530000}\n"
2086 "{product_name:RE305,product_ver:1.0.0,special_id:4a500000}\n"
2087 "{product_name:RE305,product_ver:1.0.0,special_id:42520000}\n"
2088 "{product_name:RE305,product_ver:1.0.0,special_id:4b520000}\n"
2089 "{product_name:RE305,product_ver:1.0.0,special_id:41550000}\n"
2090 "{product_name:RE305,product_ver:1.0.0,special_id:43410000}\n",
2095 {"fs-uboot", 0x00000, 0x20000},
2096 {"firmware", 0x20000, 0x5e0000},
2097 {"partition-table", 0x600000, 0x02000},
2098 {"default-mac", 0x610000, 0x00020},
2099 {"pin", 0x610100, 0x00020},
2100 {"product-info", 0x611100, 0x01000},
2101 {"soft-version", 0x620000, 0x01000},
2102 {"support-list", 0x621000, 0x01000},
2103 {"profile", 0x622000, 0x08000},
2104 {"user-config", 0x630000, 0x10000},
2105 {"default-config", 0x640000, 0x10000},
2106 {"radio", 0x7f0000, 0x10000},
2110 .first_sysupgrade_partition
= "os-image",
2111 .last_sysupgrade_partition
= "file-system"
2114 /** Firmware layout for the RE350 v1 */
2120 "{product_name:RE350,product_ver:1.0.0,special_id:45550000}\n"
2121 "{product_name:RE350,product_ver:1.0.0,special_id:00000000}\n"
2122 "{product_name:RE350,product_ver:1.0.0,special_id:41550000}\n"
2123 "{product_name:RE350,product_ver:1.0.0,special_id:55530000}\n"
2124 "{product_name:RE350,product_ver:1.0.0,special_id:43410000}\n"
2125 "{product_name:RE350,product_ver:1.0.0,special_id:4b520000}\n"
2126 "{product_name:RE350,product_ver:1.0.0,special_id:4a500000}\n",
2130 /** We're using a dynamic kernel/rootfs split here */
2132 {"fs-uboot", 0x00000, 0x20000},
2133 {"firmware", 0x20000, 0x5e0000},
2134 {"partition-table", 0x600000, 0x02000},
2135 {"default-mac", 0x610000, 0x00020},
2136 {"pin", 0x610100, 0x00020},
2137 {"product-info", 0x611100, 0x01000},
2138 {"soft-version", 0x620000, 0x01000},
2139 {"support-list", 0x621000, 0x01000},
2140 {"profile", 0x622000, 0x08000},
2141 {"user-config", 0x630000, 0x10000},
2142 {"default-config", 0x640000, 0x10000},
2143 {"radio", 0x7f0000, 0x10000},
2147 .first_sysupgrade_partition
= "os-image",
2148 .last_sysupgrade_partition
= "file-system"
2151 /** Firmware layout for the RE350K v1 */
2157 "{product_name:RE350K,product_ver:1.0.0,special_id:00000000,product_region:US}\n",
2161 /** We're using a dynamic kernel/rootfs split here */
2163 {"fs-uboot", 0x00000, 0x20000},
2164 {"firmware", 0x20000, 0xd70000},
2165 {"partition-table", 0xd90000, 0x02000},
2166 {"default-mac", 0xda0000, 0x00020},
2167 {"pin", 0xda0100, 0x00020},
2168 {"product-info", 0xda1100, 0x01000},
2169 {"soft-version", 0xdb0000, 0x01000},
2170 {"support-list", 0xdb1000, 0x01000},
2171 {"profile", 0xdb2000, 0x08000},
2172 {"user-config", 0xdc0000, 0x10000},
2173 {"default-config", 0xdd0000, 0x10000},
2174 {"device-id", 0xde0000, 0x00108},
2175 {"radio", 0xff0000, 0x10000},
2179 .first_sysupgrade_partition
= "os-image",
2180 .last_sysupgrade_partition
= "file-system"
2183 /** Firmware layout for the RE355 */
2189 "{product_name:RE355,product_ver:1.0.0,special_id:00000000}\r\n"
2190 "{product_name:RE355,product_ver:1.0.0,special_id:55530000}\r\n"
2191 "{product_name:RE355,product_ver:1.0.0,special_id:45550000}\r\n"
2192 "{product_name:RE355,product_ver:1.0.0,special_id:4A500000}\r\n"
2193 "{product_name:RE355,product_ver:1.0.0,special_id:43410000}\r\n"
2194 "{product_name:RE355,product_ver:1.0.0,special_id:41550000}\r\n"
2195 "{product_name:RE355,product_ver:1.0.0,special_id:4B520000}\r\n"
2196 "{product_name:RE355,product_ver:1.0.0,special_id:55534100}\r\n",
2200 /* We're using a dynamic kernel/rootfs split here */
2202 {"fs-uboot", 0x00000, 0x20000},
2203 {"firmware", 0x20000, 0x5e0000},
2204 {"partition-table", 0x600000, 0x02000},
2205 {"default-mac", 0x610000, 0x00020},
2206 {"pin", 0x610100, 0x00020},
2207 {"product-info", 0x611100, 0x01000},
2208 {"soft-version", 0x620000, 0x01000},
2209 {"support-list", 0x621000, 0x01000},
2210 {"profile", 0x622000, 0x08000},
2211 {"user-config", 0x630000, 0x10000},
2212 {"default-config", 0x640000, 0x10000},
2213 {"radio", 0x7f0000, 0x10000},
2217 .first_sysupgrade_partition
= "os-image",
2218 .last_sysupgrade_partition
= "file-system"
2221 /** Firmware layout for the RE450 */
2227 "{product_name:RE450,product_ver:1.0.0,special_id:00000000}\r\n"
2228 "{product_name:RE450,product_ver:1.0.0,special_id:55530000}\r\n"
2229 "{product_name:RE450,product_ver:1.0.0,special_id:45550000}\r\n"
2230 "{product_name:RE450,product_ver:1.0.0,special_id:4A500000}\r\n"
2231 "{product_name:RE450,product_ver:1.0.0,special_id:43410000}\r\n"
2232 "{product_name:RE450,product_ver:1.0.0,special_id:41550000}\r\n"
2233 "{product_name:RE450,product_ver:1.0.0,special_id:4B520000}\r\n"
2234 "{product_name:RE450,product_ver:1.0.0,special_id:55534100}\r\n",
2238 /** We're using a dynamic kernel/rootfs split here */
2240 {"fs-uboot", 0x00000, 0x20000},
2241 {"firmware", 0x20000, 0x5e0000},
2242 {"partition-table", 0x600000, 0x02000},
2243 {"default-mac", 0x610000, 0x00020},
2244 {"pin", 0x610100, 0x00020},
2245 {"product-info", 0x611100, 0x01000},
2246 {"soft-version", 0x620000, 0x01000},
2247 {"support-list", 0x621000, 0x01000},
2248 {"profile", 0x622000, 0x08000},
2249 {"user-config", 0x630000, 0x10000},
2250 {"default-config", 0x640000, 0x10000},
2251 {"radio", 0x7f0000, 0x10000},
2255 .first_sysupgrade_partition
= "os-image",
2256 .last_sysupgrade_partition
= "file-system"
2259 /** Firmware layout for the RE450 v2 */
2265 "{product_name:RE450,product_ver:2.0.0,special_id:00000000}\r\n"
2266 "{product_name:RE450,product_ver:2.0.0,special_id:55530000}\r\n"
2267 "{product_name:RE450,product_ver:2.0.0,special_id:45550000}\r\n"
2268 "{product_name:RE450,product_ver:2.0.0,special_id:4A500000}\r\n"
2269 "{product_name:RE450,product_ver:2.0.0,special_id:43410000}\r\n"
2270 "{product_name:RE450,product_ver:2.0.0,special_id:41550000}\r\n"
2271 "{product_name:RE450,product_ver:2.0.0,special_id:41530000}\r\n"
2272 "{product_name:RE450,product_ver:2.0.0,special_id:4B520000}\r\n"
2273 "{product_name:RE450,product_ver:2.0.0,special_id:42520000}\r\n",
2277 /* We're using a dynamic kernel/rootfs split here */
2279 {"fs-uboot", 0x00000, 0x20000},
2280 {"firmware", 0x20000, 0x5e0000},
2281 {"partition-table", 0x600000, 0x02000},
2282 {"default-mac", 0x610000, 0x00020},
2283 {"pin", 0x610100, 0x00020},
2284 {"product-info", 0x611100, 0x01000},
2285 {"soft-version", 0x620000, 0x01000},
2286 {"support-list", 0x621000, 0x01000},
2287 {"profile", 0x622000, 0x08000},
2288 {"user-config", 0x630000, 0x10000},
2289 {"default-config", 0x640000, 0x10000},
2290 {"radio", 0x7f0000, 0x10000},
2294 .first_sysupgrade_partition
= "os-image",
2295 .last_sysupgrade_partition
= "file-system"
2298 /** Firmware layout for the RE450 v3 */
2304 "{product_name:RE450,product_ver:3.0.0,special_id:00000000}\r\n"
2305 "{product_name:RE450,product_ver:3.0.0,special_id:55530000}\r\n"
2306 "{product_name:RE450,product_ver:3.0.0,special_id:45550000}\r\n"
2307 "{product_name:RE450,product_ver:3.0.0,special_id:4A500000}\r\n"
2308 "{product_name:RE450,product_ver:3.0.0,special_id:43410000}\r\n"
2309 "{product_name:RE450,product_ver:3.0.0,special_id:41550000}\r\n"
2310 "{product_name:RE450,product_ver:3.0.0,special_id:41530000}\r\n"
2311 "{product_name:RE450,product_ver:3.0.0,special_id:4B520000}\r\n"
2312 "{product_name:RE450,product_ver:3.0.0,special_id:42520000}\r\n",
2316 /* We're using a dynamic kernel/rootfs split here */
2318 {"fs-uboot", 0x00000, 0x20000},
2319 {"default-mac", 0x20000, 0x00020},
2320 {"pin", 0x20020, 0x00020},
2321 {"product-info", 0x21000, 0x01000},
2322 {"partition-table", 0x22000, 0x02000},
2323 {"soft-version", 0x24000, 0x01000},
2324 {"support-list", 0x25000, 0x01000},
2325 {"profile", 0x26000, 0x08000},
2326 {"user-config", 0x2e000, 0x10000},
2327 {"default-config", 0x3e000, 0x10000},
2328 {"config-info", 0x4e000, 0x00400},
2329 {"firmware", 0x50000, 0x7a0000},
2330 {"radio", 0x7f0000, 0x10000},
2334 .first_sysupgrade_partition
= "os-image",
2335 .last_sysupgrade_partition
= "file-system"
2338 /** Firmware layout for the RE500 */
2344 "{product_name:RE500,product_ver:1.0.0,special_id:00000000}\r\n"
2345 "{product_name:RE500,product_ver:1.0.0,special_id:55530000}\r\n"
2346 "{product_name:RE500,product_ver:1.0.0,special_id:45550000}\r\n"
2347 "{product_name:RE500,product_ver:1.0.0,special_id:4A500000}\r\n"
2348 "{product_name:RE500,product_ver:1.0.0,special_id:43410000}\r\n"
2349 "{product_name:RE500,product_ver:1.0.0,special_id:41550000}\r\n"
2350 "{product_name:RE500,product_ver:1.0.0,special_id:41530000}\r\n",
2354 /* We're using a dynamic kernel/rootfs split here */
2356 {"fs-uboot", 0x00000, 0x20000},
2357 {"firmware", 0x20000, 0xde0000},
2358 {"partition-table", 0xe00000, 0x02000},
2359 {"default-mac", 0xe10000, 0x00020},
2360 {"pin", 0xe10100, 0x00020},
2361 {"product-info", 0xe11100, 0x01000},
2362 {"soft-version", 0xe20000, 0x01000},
2363 {"support-list", 0xe21000, 0x01000},
2364 {"profile", 0xe22000, 0x08000},
2365 {"user-config", 0xe30000, 0x10000},
2366 {"default-config", 0xe40000, 0x10000},
2367 {"radio", 0xff0000, 0x10000},
2371 .first_sysupgrade_partition
= "os-image",
2372 .last_sysupgrade_partition
= "file-system"
2375 /** Firmware layout for the RE650 */
2381 "{product_name:RE650,product_ver:1.0.0,special_id:00000000}\r\n"
2382 "{product_name:RE650,product_ver:1.0.0,special_id:55530000}\r\n"
2383 "{product_name:RE650,product_ver:1.0.0,special_id:45550000}\r\n"
2384 "{product_name:RE650,product_ver:1.0.0,special_id:4A500000}\r\n"
2385 "{product_name:RE650,product_ver:1.0.0,special_id:43410000}\r\n"
2386 "{product_name:RE650,product_ver:1.0.0,special_id:41550000}\r\n"
2387 "{product_name:RE650,product_ver:1.0.0,special_id:41530000}\r\n",
2391 /* We're using a dynamic kernel/rootfs split here */
2393 {"fs-uboot", 0x00000, 0x20000},
2394 {"firmware", 0x20000, 0xde0000},
2395 {"partition-table", 0xe00000, 0x02000},
2396 {"default-mac", 0xe10000, 0x00020},
2397 {"pin", 0xe10100, 0x00020},
2398 {"product-info", 0xe11100, 0x01000},
2399 {"soft-version", 0xe20000, 0x01000},
2400 {"support-list", 0xe21000, 0x01000},
2401 {"profile", 0xe22000, 0x08000},
2402 {"user-config", 0xe30000, 0x10000},
2403 {"default-config", 0xe40000, 0x10000},
2404 {"radio", 0xff0000, 0x10000},
2408 .first_sysupgrade_partition
= "os-image",
2409 .last_sysupgrade_partition
= "file-system"
2415 #define error(_ret, _errno, _str, ...) \
2417 fprintf(stderr, _str ": %s\n", ## __VA_ARGS__, \
2418 strerror(_errno)); \
2424 /** Stores a uint32 as big endian */
2425 static inline void put32(uint8_t *buf
, uint32_t val
) {
2432 static inline bool meta_partition_should_pad(enum partition_trail_value pv
)
2434 return (pv
>= 0) && (pv
<= PART_TRAIL_MAX
);
2437 /** Allocate a padded meta partition with a correctly initialised header
2438 * If the `data` pointer is NULL, then the required space is only allocated,
2439 * otherwise `data_len` bytes will be copied from `data` into the partition
2441 static struct image_partition_entry
init_meta_partition_entry(
2442 const char *name
, const void *data
, uint32_t data_len
,
2443 enum partition_trail_value pad_value
)
2445 uint32_t total_len
= sizeof(struct meta_header
) + data_len
;
2446 if (meta_partition_should_pad(pad_value
))
2449 struct image_partition_entry entry
= {
2452 .data
= malloc(total_len
)
2455 error(1, errno
, "failed to allocate meta partition entry");
2457 struct meta_header
*header
= (struct meta_header
*)entry
.data
;
2458 header
->length
= htonl(data_len
);
2462 memcpy(entry
.data
+sizeof(*header
), data
, data_len
);
2464 if (meta_partition_should_pad(pad_value
))
2465 entry
.data
[total_len
- 1] = (uint8_t) pad_value
;
2470 /** Allocates a new image partition */
2471 static struct image_partition_entry
alloc_image_partition(const char *name
, size_t len
) {
2472 struct image_partition_entry entry
= {name
, len
, malloc(len
)};
2474 error(1, errno
, "malloc");
2479 /** Frees an image partition */
2480 static void free_image_partition(struct image_partition_entry entry
) {
2484 static time_t source_date_epoch
= -1;
2485 static void set_source_date_epoch() {
2486 char *env
= getenv("SOURCE_DATE_EPOCH");
2490 source_date_epoch
= strtoull(env
, &endptr
, 10);
2491 if (errno
|| (endptr
&& *endptr
!= '\0')) {
2492 fprintf(stderr
, "Invalid SOURCE_DATE_EPOCH");
2498 /** Generates the partition-table partition */
2499 static struct image_partition_entry
make_partition_table(const struct flash_partition_entry
*p
) {
2500 struct image_partition_entry entry
= alloc_image_partition("partition-table", 0x800);
2502 char *s
= (char *)entry
.data
, *end
= (char *)(s
+entry
.size
);
2510 for (i
= 0; p
[i
].name
; i
++) {
2512 size_t w
= snprintf(s
, len
, "partition %s base 0x%05x size 0x%05x\n", p
[i
].name
, p
[i
].base
, p
[i
].size
);
2515 error(1, 0, "flash partition table overflow?");
2522 memset(s
, 0xff, end
-s
);
2528 /** Generates a binary-coded decimal representation of an integer in the range [0, 99] */
2529 static inline uint8_t bcd(uint8_t v
) {
2530 return 0x10 * (v
/10) + v
%10;
2534 /** Generates the soft-version partition */
2535 static struct image_partition_entry
make_soft_version(
2536 const struct device_info
*info
, uint32_t rev
)
2538 /** If an info string is provided, use this instead of
2539 * the structured data, and include the null-termination */
2540 if (info
->soft_ver
) {
2541 uint32_t len
= strlen(info
->soft_ver
) + 1;
2542 return init_meta_partition_entry("soft-version",
2543 info
->soft_ver
, len
, info
->part_trail
);
2548 if (source_date_epoch
!= -1)
2549 t
= source_date_epoch
;
2550 else if (time(&t
) == (time_t)(-1))
2551 error(1, errno
, "time");
2553 struct tm
*tm
= gmtime(&t
);
2555 struct soft_version s
= {
2562 .year_hi
= bcd((1900+tm
->tm_year
)/100),
2563 .year_lo
= bcd(tm
->tm_year
%100),
2564 .month
= bcd(tm
->tm_mon
+1),
2565 .day
= bcd(tm
->tm_mday
),
2567 .compat_level
= htonl(info
->soft_ver_compat_level
)
2570 if (info
->soft_ver_compat_level
== 0)
2571 return init_meta_partition_entry("soft-version", &s
,
2572 (uint8_t *)(&s
.compat_level
) - (uint8_t *)(&s
),
2575 return init_meta_partition_entry("soft-version", &s
,
2576 sizeof(s
), info
->part_trail
);
2579 /** Generates the support-list partition */
2580 static struct image_partition_entry
make_support_list(
2581 const struct device_info
*info
)
2583 uint32_t len
= strlen(info
->support_list
);
2584 return init_meta_partition_entry("support-list", info
->support_list
,
2585 len
, info
->part_trail
);
2588 /** Partition with extra-para data */
2589 static struct image_partition_entry
make_extra_para(
2590 const struct device_info
*info
, const uint8_t *extra_para
, size_t len
)
2592 return init_meta_partition_entry("extra-para", extra_para
, len
,
2596 /** Creates a new image partition with an arbitrary name from a file */
2597 static struct image_partition_entry
read_file(const char *part_name
, const char *filename
, bool add_jffs2_eof
, struct flash_partition_entry
*file_system_partition
) {
2598 struct stat statbuf
;
2600 if (stat(filename
, &statbuf
) < 0)
2601 error(1, errno
, "unable to stat file `%s'", filename
);
2603 size_t len
= statbuf
.st_size
;
2605 if (add_jffs2_eof
) {
2606 if (file_system_partition
)
2607 len
= ALIGN(len
+ file_system_partition
->base
, 0x10000) + sizeof(jffs2_eof_mark
) - file_system_partition
->base
;
2609 len
= ALIGN(len
, 0x10000) + sizeof(jffs2_eof_mark
);
2612 struct image_partition_entry entry
= alloc_image_partition(part_name
, len
);
2614 FILE *file
= fopen(filename
, "rb");
2616 error(1, errno
, "unable to open file `%s'", filename
);
2618 if (fread(entry
.data
, statbuf
.st_size
, 1, file
) != 1)
2619 error(1, errno
, "unable to read file `%s'", filename
);
2621 if (add_jffs2_eof
) {
2622 uint8_t *eof
= entry
.data
+ statbuf
.st_size
, *end
= entry
.data
+entry
.size
;
2624 memset(eof
, 0xff, end
- eof
- sizeof(jffs2_eof_mark
));
2625 memcpy(end
- sizeof(jffs2_eof_mark
), jffs2_eof_mark
, sizeof(jffs2_eof_mark
));
2634 Copies a list of image partitions into an image buffer and generates the image partition table while doing so
2636 Example image partition table:
2638 fwup-ptn partition-table base 0x00800 size 0x00800
2639 fwup-ptn os-image base 0x01000 size 0x113b45
2640 fwup-ptn file-system base 0x114b45 size 0x1d0004
2641 fwup-ptn support-list base 0x2e4b49 size 0x000d1
2643 Each line of the partition table is terminated with the bytes 09 0d 0a ("\t\r\n"),
2644 the end of the partition table is marked with a zero byte.
2646 The firmware image must contain at least the partition-table and support-list partitions
2647 to be accepted. There aren't any alignment constraints for the image partitions.
2649 The partition-table partition contains the actual flash layout; partitions
2650 from the image partition table are mapped to the corresponding flash partitions during
2651 the firmware upgrade. The support-list partition contains a list of devices supported by
2654 The base offsets in the firmware partition table are relative to the end
2655 of the vendor information block, so the partition-table partition will
2656 actually start at offset 0x1814 of the image.
2658 I think partition-table must be the first partition in the firmware image.
2660 static void put_partitions(uint8_t *buffer
, const struct flash_partition_entry
*flash_parts
, const struct image_partition_entry
*parts
) {
2662 char *image_pt
= (char *)buffer
, *end
= image_pt
+ 0x800;
2664 size_t base
= 0x800;
2665 for (i
= 0; parts
[i
].name
; i
++) {
2666 for (j
= 0; flash_parts
[j
].name
; j
++) {
2667 if (!strcmp(flash_parts
[j
].name
, parts
[i
].name
)) {
2668 if (parts
[i
].size
> flash_parts
[j
].size
)
2669 error(1, 0, "%s partition too big (more than %u bytes)", flash_parts
[j
].name
, (unsigned)flash_parts
[j
].size
);
2674 assert(flash_parts
[j
].name
);
2676 memcpy(buffer
+ base
, parts
[i
].data
, parts
[i
].size
);
2678 size_t len
= end
-image_pt
;
2679 size_t w
= snprintf(image_pt
, len
, "fwup-ptn %s base 0x%05x size 0x%05x\t\r\n", parts
[i
].name
, (unsigned)base
, (unsigned)parts
[i
].size
);
2682 error(1, 0, "image partition table overflow?");
2686 base
+= parts
[i
].size
;
2690 /** Generates and writes the image MD5 checksum */
2691 static void put_md5(uint8_t *md5
, uint8_t *buffer
, unsigned int len
) {
2695 MD5_Update(&ctx
, md5_salt
, (unsigned int)sizeof(md5_salt
));
2696 MD5_Update(&ctx
, buffer
, len
);
2697 MD5_Final(md5
, &ctx
);
2702 Generates the firmware image in factory format
2708 0000-0003 Image size (4 bytes, big endian)
2709 0004-0013 MD5 hash (hash of a 16 byte salt and the image data starting with byte 0x14)
2710 0014-0017 Vendor information length (without padding) (4 bytes, big endian)
2711 0018-1013 Vendor information (4092 bytes, padded with 0xff; there seem to be older
2712 (VxWorks-based) TP-LINK devices which use a smaller vendor information block)
2713 1014-1813 Image partition table (2048 bytes, padded with 0xff)
2714 1814-xxxx Firmware partitions
2716 static void * generate_factory_image(struct device_info
*info
, const struct image_partition_entry
*parts
, size_t *len
) {
2720 for (i
= 0; parts
[i
].name
; i
++)
2721 *len
+= parts
[i
].size
;
2723 uint8_t *image
= malloc(*len
);
2725 error(1, errno
, "malloc");
2727 memset(image
, 0xff, *len
);
2731 size_t vendor_len
= strlen(info
->vendor
);
2732 put32(image
+0x14, vendor_len
);
2733 memcpy(image
+0x18, info
->vendor
, vendor_len
);
2736 put_partitions(image
+ 0x1014, info
->partitions
, parts
);
2737 put_md5(image
+0x04, image
+0x14, *len
-0x14);
2743 Generates the firmware image in sysupgrade format
2745 This makes some assumptions about the provided flash and image partition tables and
2746 should be generalized when TP-LINK starts building its safeloader into hardware with
2747 different flash layouts.
2749 static void * generate_sysupgrade_image(struct device_info
*info
, const struct image_partition_entry
*image_parts
, size_t *len
) {
2751 size_t flash_first_partition_index
= 0;
2752 size_t flash_last_partition_index
= 0;
2753 const struct flash_partition_entry
*flash_first_partition
= NULL
;
2754 const struct flash_partition_entry
*flash_last_partition
= NULL
;
2755 const struct image_partition_entry
*image_last_partition
= NULL
;
2757 /** Find first and last partitions */
2758 for (i
= 0; info
->partitions
[i
].name
; i
++) {
2759 if (!strcmp(info
->partitions
[i
].name
, info
->first_sysupgrade_partition
)) {
2760 flash_first_partition
= &info
->partitions
[i
];
2761 flash_first_partition_index
= i
;
2762 } else if (!strcmp(info
->partitions
[i
].name
, info
->last_sysupgrade_partition
)) {
2763 flash_last_partition
= &info
->partitions
[i
];
2764 flash_last_partition_index
= i
;
2768 assert(flash_first_partition
&& flash_last_partition
);
2769 assert(flash_first_partition_index
< flash_last_partition_index
);
2771 /** Find last partition from image to calculate needed size */
2772 for (i
= 0; image_parts
[i
].name
; i
++) {
2773 if (!strcmp(image_parts
[i
].name
, info
->last_sysupgrade_partition
)) {
2774 image_last_partition
= &image_parts
[i
];
2779 assert(image_last_partition
);
2781 *len
= flash_last_partition
->base
- flash_first_partition
->base
+ image_last_partition
->size
;
2783 uint8_t *image
= malloc(*len
);
2785 error(1, errno
, "malloc");
2787 memset(image
, 0xff, *len
);
2789 for (i
= flash_first_partition_index
; i
<= flash_last_partition_index
; i
++) {
2790 for (j
= 0; image_parts
[j
].name
; j
++) {
2791 if (!strcmp(info
->partitions
[i
].name
, image_parts
[j
].name
)) {
2792 if (image_parts
[j
].size
> info
->partitions
[i
].size
)
2793 error(1, 0, "%s partition too big (more than %u bytes)", info
->partitions
[i
].name
, (unsigned)info
->partitions
[i
].size
);
2794 memcpy(image
+ info
->partitions
[i
].base
- flash_first_partition
->base
, image_parts
[j
].data
, image_parts
[j
].size
);
2798 assert(image_parts
[j
].name
);
2805 /** Generates an image according to a given layout and writes it to a file */
2806 static void build_image(const char *output
,
2807 const char *kernel_image
,
2808 const char *rootfs_image
,
2812 struct device_info
*info
) {
2816 struct image_partition_entry parts
[7] = {};
2818 struct flash_partition_entry
*firmware_partition
= NULL
;
2819 struct flash_partition_entry
*os_image_partition
= NULL
;
2820 struct flash_partition_entry
*file_system_partition
= NULL
;
2821 size_t firmware_partition_index
= 0;
2823 for (i
= 0; info
->partitions
[i
].name
; i
++) {
2824 if (!strcmp(info
->partitions
[i
].name
, "firmware"))
2826 firmware_partition
= &info
->partitions
[i
];
2827 firmware_partition_index
= i
;
2831 if (firmware_partition
)
2833 os_image_partition
= &info
->partitions
[firmware_partition_index
];
2834 file_system_partition
= &info
->partitions
[firmware_partition_index
+ 1];
2837 if (stat(kernel_image
, &kernel
) < 0)
2838 error(1, errno
, "unable to stat file `%s'", kernel_image
);
2840 if (kernel
.st_size
> firmware_partition
->size
)
2841 error(1, 0, "kernel overflowed firmware partition\n");
2843 for (i
= MAX_PARTITIONS
-1; i
>= firmware_partition_index
+ 1; i
--)
2844 info
->partitions
[i
+1] = info
->partitions
[i
];
2846 file_system_partition
->name
= "file-system";
2847 file_system_partition
->base
= firmware_partition
->base
+ kernel
.st_size
;
2849 /* Align partition start to erase blocks for factory images only */
2851 file_system_partition
->base
= ALIGN(firmware_partition
->base
+ kernel
.st_size
, 0x10000);
2853 file_system_partition
->size
= firmware_partition
->size
- file_system_partition
->base
;
2855 os_image_partition
->name
= "os-image";
2856 os_image_partition
->size
= kernel
.st_size
;
2859 parts
[0] = make_partition_table(info
->partitions
);
2860 parts
[1] = make_soft_version(info
, rev
);
2861 parts
[2] = make_support_list(info
);
2862 parts
[3] = read_file("os-image", kernel_image
, false, NULL
);
2863 parts
[4] = read_file("file-system", rootfs_image
, add_jffs2_eof
, file_system_partition
);
2865 /* Some devices need the extra-para partition to accept the firmware */
2866 if (strcasecmp(info
->id
, "ARCHER-A6-V3") == 0 ||
2867 strcasecmp(info
->id
, "ARCHER-A7-V5") == 0 ||
2868 strcasecmp(info
->id
, "ARCHER-C2-V3") == 0 ||
2869 strcasecmp(info
->id
, "ARCHER-C7-V4") == 0 ||
2870 strcasecmp(info
->id
, "ARCHER-C7-V5") == 0 ||
2871 strcasecmp(info
->id
, "ARCHER-C25-V1") == 0 ||
2872 strcasecmp(info
->id
, "ARCHER-C59-V2") == 0 ||
2873 strcasecmp(info
->id
, "ARCHER-C60-V2") == 0 ||
2874 strcasecmp(info
->id
, "ARCHER-C60-V3") == 0 ||
2875 strcasecmp(info
->id
, "TLWR1043NV5") == 0) {
2876 const uint8_t extra_para
[2] = {0x01, 0x00};
2877 parts
[5] = make_extra_para(info
, extra_para
,
2878 sizeof(extra_para
));
2879 } else if (strcasecmp(info
->id
, "ARCHER-C6-V2") == 0) {
2880 const uint8_t extra_para
[2] = {0x00, 0x01};
2881 parts
[5] = make_extra_para(info
, extra_para
,
2882 sizeof(extra_para
));
2883 } else if (strcasecmp(info
->id
, "ARCHER-C6-V2-US") == 0 ||
2884 strcasecmp(info
->id
, "EAP245-V3") == 0) {
2885 const uint8_t extra_para
[2] = {0x01, 0x01};
2886 parts
[5] = make_extra_para(info
, extra_para
,
2887 sizeof(extra_para
));
2893 image
= generate_sysupgrade_image(info
, parts
, &len
);
2895 image
= generate_factory_image(info
, parts
, &len
);
2897 FILE *file
= fopen(output
, "wb");
2899 error(1, errno
, "unable to open output file");
2901 if (fwrite(image
, len
, 1, file
) != 1)
2902 error(1, 0, "unable to write output file");
2908 for (i
= 0; parts
[i
].name
; i
++)
2909 free_image_partition(parts
[i
]);
2913 static void usage(const char *argv0
) {
2915 "Usage: %s [OPTIONS...]\n"
2918 " -h show this help\n"
2920 "Info about an image:\n"
2921 " -i <file> input file to read from\n"
2922 "Create a new image:\n"
2923 " -B <board> create image for the board specified with <board>\n"
2924 " -k <file> read kernel image from the file <file>\n"
2925 " -r <file> read rootfs image from the file <file>\n"
2926 " -o <file> write output to the file <file>\n"
2927 " -V <rev> sets the revision number to <rev>\n"
2928 " -j add jffs2 end-of-filesystem markers\n"
2929 " -S create sysupgrade instead of factory image\n"
2930 "Extract an old image:\n"
2931 " -x <file> extract all oem firmware partition\n"
2932 " -d <dir> destination to extract the firmware partition\n"
2933 " -z <file> convert an oem firmware into a sysupgade file. Use -o for output file\n",
2939 static struct device_info
*find_board(const char *id
)
2941 struct device_info
*board
= NULL
;
2943 for (board
= boards
; board
->id
!= NULL
; board
++)
2944 if (strcasecmp(id
, board
->id
) == 0)
2950 static int add_flash_partition(
2951 struct flash_partition_entry
*part_list
,
2958 /* check if the list has a free entry */
2959 for (ptr
= 0; ptr
< max_entries
; ptr
++, part_list
++) {
2960 if (part_list
->name
== NULL
&&
2961 part_list
->base
== 0 &&
2962 part_list
->size
== 0)
2966 if (ptr
== max_entries
) {
2967 error(1, 0, "No free flash part entry available.");
2970 part_list
->name
= calloc(1, strlen(name
) + 1);
2971 if (!part_list
->name
) {
2972 error(1, 0, "Unable to allocate memory");
2975 memcpy((char *)part_list
->name
, name
, strlen(name
));
2976 part_list
->base
= base
;
2977 part_list
->size
= size
;
2982 /** read the partition table into struct flash_partition_entry */
2983 static int read_partition_table(
2984 FILE *file
, long offset
,
2985 struct flash_partition_entry
*entries
, size_t max_entries
,
2990 const char *parthdr
= NULL
;
2991 const char *fwuphdr
= "fwup-ptn";
2992 const char *flashhdr
= "partition";
2994 /* TODO: search for the partition table */
3004 error(1, 0, "Invalid partition table");
3007 if (fseek(file
, offset
, SEEK_SET
) < 0)
3008 error(1, errno
, "Can not seek in the firmware");
3010 if (fread(buf
, 2048, 1, file
) != 1)
3011 error(1, errno
, "Can not read fwup-ptn from the firmware");
3015 /* look for the partition header */
3016 if (memcmp(buf
, parthdr
, strlen(parthdr
)) != 0) {
3017 fprintf(stderr
, "DEBUG: can not find fwuphdr\n");
3022 end
= buf
+ sizeof(buf
);
3023 while ((ptr
+ strlen(parthdr
)) < end
&&
3024 memcmp(ptr
, parthdr
, strlen(parthdr
)) == 0) {
3028 char name
[32] = { 0 };
3030 unsigned long base
= 0;
3031 unsigned long size
= 0;
3033 end_part
= memchr(ptr
, '\n', (end
- ptr
));
3034 if (end_part
== NULL
) {
3035 /* in theory this should never happen, because a partition always ends with 0x09, 0x0D, 0x0A */
3039 for (int i
= 0; i
<= 4; i
++) {
3040 if (end_part
<= ptr
)
3043 end_element
= memchr(ptr
, 0x20, (end_part
- ptr
));
3044 if (end_element
== NULL
) {
3045 error(1, errno
, "Ignoring the rest of the partition entries.");
3050 /* partition header */
3052 ptr
= end_element
+ 1;
3056 name_len
= (end_element
- ptr
) > 31 ? 31 : (end_element
- ptr
);
3057 strncpy(name
, ptr
, name_len
);
3058 name
[name_len
] = '\0';
3059 ptr
= end_element
+ 1;
3064 ptr
= end_element
+ 1;
3069 base
= strtoul(ptr
, NULL
, 16);
3070 ptr
= end_element
+ 1;
3075 ptr
= end_element
+ 1;
3076 /* actual size. The last element doesn't have a sepeartor */
3077 size
= strtoul(ptr
, NULL
, 16);
3078 /* the part ends with 0x09, 0x0d, 0x0a */
3080 add_flash_partition(entries
, max_entries
, name
, base
, size
);
3089 static void write_partition(
3091 size_t firmware_offset
,
3092 struct flash_partition_entry
*entry
,
3098 fseek(input_file
, entry
->base
+ firmware_offset
, SEEK_SET
);
3100 for (offset
= 0; sizeof(buf
) + offset
<= entry
->size
; offset
+= sizeof(buf
)) {
3101 if (fread(buf
, sizeof(buf
), 1, input_file
) != 1)
3102 error(1, errno
, "Can not read partition from input_file");
3104 if (fwrite(buf
, sizeof(buf
), 1, output_file
) != 1)
3105 error(1, errno
, "Can not write partition to output_file");
3107 /* write last chunk smaller than buffer */
3108 if (offset
< entry
->size
) {
3109 offset
= entry
->size
- offset
;
3110 if (fread(buf
, offset
, 1, input_file
) != 1)
3111 error(1, errno
, "Can not read partition from input_file");
3112 if (fwrite(buf
, offset
, 1, output_file
) != 1)
3113 error(1, errno
, "Can not write partition to output_file");
3117 static int extract_firmware_partition(FILE *input_file
, size_t firmware_offset
, struct flash_partition_entry
*entry
, const char *output_directory
)
3120 char output
[PATH_MAX
];
3122 snprintf(output
, PATH_MAX
, "%s/%s", output_directory
, entry
->name
);
3123 output_file
= fopen(output
, "wb+");
3124 if (output_file
== NULL
) {
3125 error(1, errno
, "Can not open output file %s", output
);
3128 write_partition(input_file
, firmware_offset
, entry
, output_file
);
3130 fclose(output_file
);
3135 /** extract all partitions from the firmware file */
3136 static int extract_firmware(const char *input
, const char *output_directory
)
3138 struct flash_partition_entry entries
[16] = { 0 };
3139 size_t max_entries
= 16;
3140 size_t firmware_offset
= 0x1014;
3143 struct stat statbuf
;
3145 /* check input file */
3146 if (stat(input
, &statbuf
)) {
3147 error(1, errno
, "Can not read input firmware %s", input
);
3150 /* check if output directory exists */
3151 if (stat(output_directory
, &statbuf
)) {
3152 error(1, errno
, "Failed to stat output directory %s", output_directory
);
3155 if ((statbuf
.st_mode
& S_IFMT
) != S_IFDIR
) {
3156 error(1, errno
, "Given output directory is not a directory %s", output_directory
);
3159 input_file
= fopen(input
, "rb");
3161 if (read_partition_table(input_file
, firmware_offset
, entries
, 16, 0) != 0) {
3162 error(1, 0, "Error can not read the partition table (fwup-ptn)");
3165 for (size_t i
= 0; i
< max_entries
; i
++) {
3166 if (entries
[i
].name
== NULL
&&
3167 entries
[i
].base
== 0 &&
3168 entries
[i
].size
== 0)
3171 extract_firmware_partition(input_file
, firmware_offset
, &entries
[i
], output_directory
);
3177 static struct flash_partition_entry
*find_partition(
3178 struct flash_partition_entry
*entries
, size_t max_entries
,
3179 const char *name
, const char *error_msg
)
3181 for (size_t i
= 0; i
< max_entries
; i
++, entries
++) {
3182 if (strcmp(entries
->name
, name
) == 0)
3187 error(1, 0, "%s", error_msg
);
3193 static int firmware_info(const char *input
)
3195 struct flash_partition_entry pointers
[MAX_PARTITIONS
] = { };
3196 struct flash_partition_entry
*e
;
3200 fp
= fopen(input
, "r");
3202 if (read_partition_table(fp
, 0x1014, pointers
, MAX_PARTITIONS
, 0)) {
3203 error(1, 0, "Error can not read the partition table (fwup-ptn)");
3206 printf("Firmware image partitions:\n");
3207 printf("%-8s %-8s %s\n", "base", "size", "name");
3208 for (i
= 0; i
< MAX_PARTITIONS
; i
++) {
3211 if (!e
->name
&& !e
->base
&& !e
->size
)
3214 printf("%08x %08x %s\n", e
->base
, e
->size
, e
->name
? e
->name
: "");
3217 e
= find_partition(pointers
, MAX_PARTITIONS
, "soft-version", NULL
);
3219 size_t data_len
= e
->size
- sizeof(struct meta_header
);
3220 char *buf
= malloc(data_len
);
3221 struct soft_version
*s
;
3226 error(1, errno
, "Failed to alloc buffer");
3228 if (fseek(fp
, 0x1014 + e
->base
+ sizeof(struct meta_header
), SEEK_SET
))
3229 error(1, errno
, "Can not seek in the firmware");
3231 if (fread(buf
, data_len
, 1, fp
) != 1)
3232 error(1, errno
, "Can not read fwup-ptn data from the firmware");
3234 /* Check for string ignoring padding character */
3236 for (i
= 0; i
< data_len
- 1; i
++) {
3237 if (!isascii(buf
[i
])) {
3243 printf("\n[Software version]\n");
3245 fwrite(buf
, data_len
, 1, stdout
);
3247 } else if (data_len
>= offsetof(struct soft_version
, rev
)) {
3248 s
= (struct soft_version
*)buf
;
3250 printf("Version: %d.%d.%d\n", s
->version_major
, s
->version_minor
, s
->version_patch
);
3251 printf("Date: %02x%02x-%02x-%02x\n", s
->year_hi
, s
->year_lo
, s
->month
, s
->day
);
3253 printf("Failed to parse data\n");
3259 e
= find_partition(pointers
, MAX_PARTITIONS
, "support-list", NULL
);
3265 if (fseek(fp
, 0x1014 + e
->base
+ sizeof(struct meta_header
), SEEK_SET
))
3266 error(1, errno
, "Can not seek in the firmware");
3268 printf("\n[Support list]\n");
3269 for (length
= e
->size
- sizeof(struct meta_header
); length
; length
-= bytes
) {
3270 bytes
= fread(buf
, 1, length
> sizeof(buf
) ? sizeof(buf
) : length
, fp
);
3272 error(1, errno
, "Can not read fwup-ptn data from the firmware");
3278 e
= find_partition(pointers
, MAX_PARTITIONS
, "partition-table", NULL
);
3280 struct flash_partition_entry parts
[MAX_PARTITIONS
] = { };
3282 if (read_partition_table(fp
, 0x1014 + e
->base
+ 4, parts
, MAX_PARTITIONS
, 1)) {
3283 error(1, 0, "Error can not read the partition table (partition)");
3286 printf("\n[Partition table]\n");
3287 printf("%-8s %-8s %s\n", "base", "size", "name");
3288 for (i
= 0; i
< MAX_PARTITIONS
; i
++) {
3291 if (!e
->name
&& !e
->base
&& !e
->size
)
3294 printf("%08x %08x %s\n", e
->base
, e
->size
, e
->name
? e
->name
: "");
3303 static void write_ff(FILE *output_file
, size_t size
)
3308 memset(buf
, 0xff, sizeof(buf
));
3310 for (offset
= 0; offset
+ sizeof(buf
) < size
; offset
+= sizeof(buf
)) {
3311 if (fwrite(buf
, sizeof(buf
), 1, output_file
) != 1)
3312 error(1, errno
, "Can not write 0xff to output_file");
3315 /* write last chunk smaller than buffer */
3316 if (offset
< size
) {
3317 offset
= size
- offset
;
3318 if (fwrite(buf
, offset
, 1, output_file
) != 1)
3319 error(1, errno
, "Can not write partition to output_file");
3323 static void convert_firmware(const char *input
, const char *output
)
3325 struct flash_partition_entry fwup
[MAX_PARTITIONS
] = { 0 };
3326 struct flash_partition_entry flash
[MAX_PARTITIONS
] = { 0 };
3327 struct flash_partition_entry
*fwup_os_image
= NULL
, *fwup_file_system
= NULL
;
3328 struct flash_partition_entry
*flash_os_image
= NULL
, *flash_file_system
= NULL
;
3329 struct flash_partition_entry
*fwup_partition_table
= NULL
;
3330 size_t firmware_offset
= 0x1014;
3331 FILE *input_file
, *output_file
;
3333 struct stat statbuf
;
3335 /* check input file */
3336 if (stat(input
, &statbuf
)) {
3337 error(1, errno
, "Can not read input firmware %s", input
);
3340 input_file
= fopen(input
, "rb");
3342 error(1, 0, "Can not open input firmware %s", input
);
3344 output_file
= fopen(output
, "wb");
3346 error(1, 0, "Can not open output firmware %s", output
);
3348 if (read_partition_table(input_file
, firmware_offset
, fwup
, MAX_PARTITIONS
, 0) != 0) {
3349 error(1, 0, "Error can not read the partition table (fwup-ptn)");
3352 fwup_os_image
= find_partition(fwup
, MAX_PARTITIONS
,
3353 "os-image", "Error can not find os-image partition (fwup)");
3354 fwup_file_system
= find_partition(fwup
, MAX_PARTITIONS
,
3355 "file-system", "Error can not find file-system partition (fwup)");
3356 fwup_partition_table
= find_partition(fwup
, MAX_PARTITIONS
,
3357 "partition-table", "Error can not find partition-table partition");
3359 /* the flash partition table has a 0x00000004 magic haeder */
3360 if (read_partition_table(input_file
, firmware_offset
+ fwup_partition_table
->base
+ 4, flash
, MAX_PARTITIONS
, 1) != 0)
3361 error(1, 0, "Error can not read the partition table (flash)");
3363 flash_os_image
= find_partition(flash
, MAX_PARTITIONS
,
3364 "os-image", "Error can not find os-image partition (flash)");
3365 flash_file_system
= find_partition(flash
, MAX_PARTITIONS
,
3366 "file-system", "Error can not find file-system partition (flash)");
3368 /* write os_image to 0x0 */
3369 write_partition(input_file
, firmware_offset
, fwup_os_image
, output_file
);
3370 write_ff(output_file
, flash_os_image
->size
- fwup_os_image
->size
);
3372 /* write file-system behind os_image */
3373 fseek(output_file
, flash_file_system
->base
- flash_os_image
->base
, SEEK_SET
);
3374 write_partition(input_file
, firmware_offset
, fwup_file_system
, output_file
);
3375 write_ff(output_file
, flash_file_system
->size
- fwup_file_system
->size
);
3377 fclose(output_file
);
3381 int main(int argc
, char *argv
[]) {
3382 const char *info_image
= NULL
, *board
= NULL
, *kernel_image
= NULL
, *rootfs_image
= NULL
, *output
= NULL
;
3383 const char *extract_image
= NULL
, *output_directory
= NULL
, *convert_image
= NULL
;
3384 bool add_jffs2_eof
= false, sysupgrade
= false;
3386 struct device_info
*info
;
3387 set_source_date_epoch();
3392 c
= getopt(argc
, argv
, "i:B:k:r:o:V:jSh:x:d:z:");
3398 info_image
= optarg
;
3406 kernel_image
= optarg
;
3410 rootfs_image
= optarg
;
3418 sscanf(optarg
, "r%u", &rev
);
3422 add_jffs2_eof
= true;
3434 output_directory
= optarg
;
3438 extract_image
= optarg
;
3442 convert_image
= optarg
;
3452 firmware_info(info_image
);
3453 } else if (extract_image
|| output_directory
) {
3455 error(1, 0, "No factory/oem image given via -x <file>. Output directory is only valid with -x");
3456 if (!output_directory
)
3457 error(1, 0, "Can not extract an image without output directory. Use -d <dir>");
3458 extract_firmware(extract_image
, output_directory
);
3459 } else if (convert_image
) {
3461 error(1, 0, "Can not convert a factory/oem image into sysupgrade image without output file. Use -o <file>");
3462 convert_firmware(convert_image
, output
);
3465 error(1, 0, "no board has been specified");
3467 error(1, 0, "no kernel image has been specified");
3469 error(1, 0, "no rootfs image has been specified");
3471 error(1, 0, "no output filename has been specified");
3473 info
= find_board(board
);
3476 error(1, 0, "unsupported board %s", board
);
3478 build_image(output
, kernel_image
, rootfs_image
, rev
, add_jffs2_eof
, sysupgrade
, info
);