2 Copyright (c) 2014, Matthias Schiffer <mschiffer@universe-factory.net>
5 Redistribution and use in source and binary forms, with or without
6 modification, are permitted provided that the following conditions are met:
8 1. Redistributions of source code must retain the above copyright notice,
9 this list of conditions and the following disclaimer.
10 2. Redistributions in binary form must reproduce the above copyright notice,
11 this list of conditions and the following disclaimer in the documentation
12 and/or other materials provided with the distribution.
14 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
15 AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16 IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
17 DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
18 FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19 DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
20 SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
21 CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
22 OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
23 OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
30 Image generation tool for the TP-LINK SafeLoader as seen on
31 TP-LINK Pharos devices (CPE210/220/510/520)
47 #include <arpa/inet.h>
49 #include <sys/types.h>
56 #define ALIGN(x,a) ({ typeof(a) __a = (a); (((x) + __a - 1) & ~(__a - 1)); })
59 #define MAX_PARTITIONS 32
61 /** An image partition table entry */
62 struct image_partition_entry
{
68 /** A flash partition table entry */
69 struct flash_partition_entry
{
75 /** Partition trailing padding definitions
76 * Values 0x00 to 0xff are reserved to indicate the padding value
77 * Values from 0x100 are reserved to indicate other behaviour */
78 enum partition_trail_value
{
81 PART_TRAIL_MAX
= 0xff,
82 PART_TRAIL_NONE
= 0x100
85 /** Firmware layout description */
89 const char *support_list
;
90 enum partition_trail_value part_trail
;
92 uint32_t soft_ver_compat_level
;
93 struct flash_partition_entry partitions
[MAX_PARTITIONS
+1];
94 const char *first_sysupgrade_partition
;
95 const char *last_sysupgrade_partition
;
98 struct __attribute__((__packed__
)) meta_header
{
103 /** The content of the soft-version structure */
104 struct __attribute__((__packed__
)) soft_version
{
106 uint8_t version_major
;
107 uint8_t version_minor
;
108 uint8_t version_patch
;
114 uint32_t compat_level
;
118 static const uint8_t jffs2_eof_mark
[4] = {0xde, 0xad, 0xc0, 0xde};
122 Salt for the MD5 hash
124 Fortunately, TP-LINK seems to use the same salt for most devices which use
125 the new image format.
127 static const uint8_t md5_salt
[16] = {
128 0x7a, 0x2b, 0x15, 0xed,
129 0x9b, 0x98, 0x59, 0x6d,
130 0xe5, 0x04, 0xab, 0x44,
131 0xac, 0x2a, 0x9f, 0x4e,
135 /** Firmware layout table */
136 static struct device_info boards
[] = {
137 /** Firmware layout for the CPE210/220 V1 */
140 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
143 "CPE210(TP-LINK|UN|N300-2):1.0\r\n"
144 "CPE210(TP-LINK|UN|N300-2):1.1\r\n"
145 "CPE210(TP-LINK|US|N300-2):1.1\r\n"
146 "CPE210(TP-LINK|EU|N300-2):1.1\r\n"
147 "CPE220(TP-LINK|UN|N300-2):1.1\r\n"
148 "CPE220(TP-LINK|US|N300-2):1.1\r\n"
149 "CPE220(TP-LINK|EU|N300-2):1.1\r\n",
154 {"fs-uboot", 0x00000, 0x20000},
155 {"partition-table", 0x20000, 0x02000},
156 {"default-mac", 0x30000, 0x00020},
157 {"product-info", 0x31100, 0x00100},
158 {"signature", 0x32000, 0x00400},
159 {"firmware", 0x40000, 0x770000},
160 {"soft-version", 0x7b0000, 0x00100},
161 {"support-list", 0x7b1000, 0x00400},
162 {"user-config", 0x7c0000, 0x10000},
163 {"default-config", 0x7d0000, 0x10000},
164 {"log", 0x7e0000, 0x10000},
165 {"radio", 0x7f0000, 0x10000},
169 .first_sysupgrade_partition
= "os-image",
170 .last_sysupgrade_partition
= "support-list",
173 /** Firmware layout for the CPE210 V2 */
176 .vendor
= "CPE210(TP-LINK|UN|N300-2|00000000):2.0\r\n",
179 "CPE210(TP-LINK|EU|N300-2|00000000):2.0\r\n"
180 "CPE210(TP-LINK|EU|N300-2|45550000):2.0\r\n"
181 "CPE210(TP-LINK|EU|N300-2|55530000):2.0\r\n"
182 "CPE210(TP-LINK|UN|N300-2|00000000):2.0\r\n"
183 "CPE210(TP-LINK|UN|N300-2|45550000):2.0\r\n"
184 "CPE210(TP-LINK|UN|N300-2|55530000):2.0\r\n"
185 "CPE210(TP-LINK|US|N300-2|55530000):2.0\r\n"
186 "CPE210(TP-LINK|UN|N300-2):2.0\r\n"
187 "CPE210(TP-LINK|EU|N300-2):2.0\r\n"
188 "CPE210(TP-LINK|US|N300-2):2.0\r\n",
193 {"fs-uboot", 0x00000, 0x20000},
194 {"partition-table", 0x20000, 0x02000},
195 {"default-mac", 0x30000, 0x00020},
196 {"product-info", 0x31100, 0x00100},
197 {"device-info", 0x31400, 0x00400},
198 {"signature", 0x32000, 0x00400},
199 {"device-id", 0x33000, 0x00100},
200 {"firmware", 0x40000, 0x770000},
201 {"soft-version", 0x7b0000, 0x00100},
202 {"support-list", 0x7b1000, 0x01000},
203 {"user-config", 0x7c0000, 0x10000},
204 {"default-config", 0x7d0000, 0x10000},
205 {"log", 0x7e0000, 0x10000},
206 {"radio", 0x7f0000, 0x10000},
210 .first_sysupgrade_partition
= "os-image",
211 .last_sysupgrade_partition
= "support-list",
214 /** Firmware layout for the CPE210 V3 */
217 .vendor
= "CPE210(TP-LINK|UN|N300-2|00000000):3.0\r\n",
220 "CPE210(TP-LINK|EU|N300-2|45550000):3.0\r\n"
221 "CPE210(TP-LINK|UN|N300-2|00000000):3.0\r\n"
222 "CPE210(TP-LINK|US|N300-2|55530000):3.0\r\n"
223 "CPE210(TP-LINK|UN|N300-2):3.0\r\n"
224 "CPE210(TP-LINK|EU|N300-2):3.0\r\n"
225 "CPE210(TP-LINK|EU|N300-2|45550000):3.1\r\n"
226 "CPE210(TP-LINK|UN|N300-2|00000000):3.1\r\n"
227 "CPE210(TP-LINK|US|N300-2|55530000):3.1\r\n"
228 "CPE210(TP-LINK|EU|N300-2|45550000):3.20\r\n"
229 "CPE210(TP-LINK|UN|N300-2|00000000):3.20\r\n"
230 "CPE210(TP-LINK|US|N300-2|55530000):3.20\r\n",
235 {"fs-uboot", 0x00000, 0x20000},
236 {"partition-table", 0x20000, 0x01000},
237 {"default-mac", 0x30000, 0x00020},
238 {"product-info", 0x31100, 0x00100},
239 {"device-info", 0x31400, 0x00400},
240 {"signature", 0x32000, 0x00400},
241 {"device-id", 0x33000, 0x00100},
242 {"firmware", 0x40000, 0x770000},
243 {"soft-version", 0x7b0000, 0x00100},
244 {"support-list", 0x7b1000, 0x01000},
245 {"user-config", 0x7c0000, 0x10000},
246 {"default-config", 0x7d0000, 0x10000},
247 {"log", 0x7e0000, 0x10000},
248 {"radio", 0x7f0000, 0x10000},
252 .first_sysupgrade_partition
= "os-image",
253 .last_sysupgrade_partition
= "support-list",
256 /** Firmware layout for the CPE220 V2 */
259 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
262 "CPE220(TP-LINK|EU|N300-2|00000000):2.0\r\n"
263 "CPE220(TP-LINK|EU|N300-2|45550000):2.0\r\n"
264 "CPE220(TP-LINK|EU|N300-2|55530000):2.0\r\n"
265 "CPE220(TP-LINK|UN|N300-2|00000000):2.0\r\n"
266 "CPE220(TP-LINK|UN|N300-2|45550000):2.0\r\n"
267 "CPE220(TP-LINK|UN|N300-2|55530000):2.0\r\n"
268 "CPE220(TP-LINK|US|N300-2|55530000):2.0\r\n"
269 "CPE220(TP-LINK|UN|N300-2):2.0\r\n"
270 "CPE220(TP-LINK|EU|N300-2):2.0\r\n"
271 "CPE220(TP-LINK|US|N300-2):2.0\r\n",
276 {"fs-uboot", 0x00000, 0x20000},
277 {"partition-table", 0x20000, 0x02000},
278 {"default-mac", 0x30000, 0x00020},
279 {"product-info", 0x31100, 0x00100},
280 {"signature", 0x32000, 0x00400},
281 {"firmware", 0x40000, 0x770000},
282 {"soft-version", 0x7b0000, 0x00100},
283 {"support-list", 0x7b1000, 0x00400},
284 {"user-config", 0x7c0000, 0x10000},
285 {"default-config", 0x7d0000, 0x10000},
286 {"log", 0x7e0000, 0x10000},
287 {"radio", 0x7f0000, 0x10000},
291 .first_sysupgrade_partition
= "os-image",
292 .last_sysupgrade_partition
= "support-list",
295 /** Firmware layout for the CPE220 V3 */
298 .vendor
= "CPE220(TP-LINK|UN|N300-2|00000000):3.0\r\n",
301 "CPE220(TP-LINK|EU|N300-2|00000000):3.0\r\n"
302 "CPE220(TP-LINK|EU|N300-2|45550000):3.0\r\n"
303 "CPE220(TP-LINK|EU|N300-2|55530000):3.0\r\n"
304 "CPE220(TP-LINK|UN|N300-2|00000000):3.0\r\n"
305 "CPE220(TP-LINK|UN|N300-2|45550000):3.0\r\n"
306 "CPE220(TP-LINK|UN|N300-2|55530000):3.0\r\n"
307 "CPE220(TP-LINK|US|N300-2|55530000):3.0\r\n"
308 "CPE220(TP-LINK|UN|N300-2):3.0\r\n"
309 "CPE220(TP-LINK|EU|N300-2):3.0\r\n"
310 "CPE220(TP-LINK|US|N300-2):3.0\r\n",
315 {"fs-uboot", 0x00000, 0x20000},
316 {"partition-table", 0x20000, 0x02000},
317 {"default-mac", 0x30000, 0x00020},
318 {"product-info", 0x31100, 0x00100},
319 {"device-info", 0x31400, 0x00400},
320 {"signature", 0x32000, 0x00400},
321 {"device-id", 0x33000, 0x00100},
322 {"firmware", 0x40000, 0x770000},
323 {"soft-version", 0x7b0000, 0x00100},
324 {"support-list", 0x7b1000, 0x01000},
325 {"user-config", 0x7c0000, 0x10000},
326 {"default-config", 0x7d0000, 0x10000},
327 {"log", 0x7e0000, 0x10000},
328 {"radio", 0x7f0000, 0x10000},
332 .first_sysupgrade_partition
= "os-image",
333 .last_sysupgrade_partition
= "support-list",
336 /** Firmware layout for the CPE510/520 V1 */
339 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
342 "CPE510(TP-LINK|UN|N300-5):1.0\r\n"
343 "CPE510(TP-LINK|UN|N300-5):1.1\r\n"
344 "CPE510(TP-LINK|UN|N300-5):1.1\r\n"
345 "CPE510(TP-LINK|US|N300-5):1.1\r\n"
346 "CPE510(TP-LINK|EU|N300-5):1.1\r\n"
347 "CPE520(TP-LINK|UN|N300-5):1.1\r\n"
348 "CPE520(TP-LINK|US|N300-5):1.1\r\n"
349 "CPE520(TP-LINK|EU|N300-5):1.1\r\n",
354 {"fs-uboot", 0x00000, 0x20000},
355 {"partition-table", 0x20000, 0x02000},
356 {"default-mac", 0x30000, 0x00020},
357 {"product-info", 0x31100, 0x00100},
358 {"signature", 0x32000, 0x00400},
359 {"firmware", 0x40000, 0x770000},
360 {"soft-version", 0x7b0000, 0x00100},
361 {"support-list", 0x7b1000, 0x00400},
362 {"user-config", 0x7c0000, 0x10000},
363 {"default-config", 0x7d0000, 0x10000},
364 {"log", 0x7e0000, 0x10000},
365 {"radio", 0x7f0000, 0x10000},
369 .first_sysupgrade_partition
= "os-image",
370 .last_sysupgrade_partition
= "support-list",
373 /** Firmware layout for the CPE510 V2 */
376 .vendor
= "CPE510(TP-LINK|UN|N300-5):2.0\r\n",
379 "CPE510(TP-LINK|EU|N300-5|00000000):2.0\r\n"
380 "CPE510(TP-LINK|EU|N300-5|45550000):2.0\r\n"
381 "CPE510(TP-LINK|EU|N300-5|55530000):2.0\r\n"
382 "CPE510(TP-LINK|UN|N300-5|00000000):2.0\r\n"
383 "CPE510(TP-LINK|UN|N300-5|45550000):2.0\r\n"
384 "CPE510(TP-LINK|UN|N300-5|55530000):2.0\r\n"
385 "CPE510(TP-LINK|US|N300-5|00000000):2.0\r\n"
386 "CPE510(TP-LINK|US|N300-5|45550000):2.0\r\n"
387 "CPE510(TP-LINK|US|N300-5|55530000):2.0\r\n"
388 "CPE510(TP-LINK|UN|N300-5):2.0\r\n"
389 "CPE510(TP-LINK|EU|N300-5):2.0\r\n"
390 "CPE510(TP-LINK|US|N300-5):2.0\r\n",
395 {"fs-uboot", 0x00000, 0x20000},
396 {"partition-table", 0x20000, 0x02000},
397 {"default-mac", 0x30000, 0x00020},
398 {"product-info", 0x31100, 0x00100},
399 {"signature", 0x32000, 0x00400},
400 {"firmware", 0x40000, 0x770000},
401 {"soft-version", 0x7b0000, 0x00100},
402 {"support-list", 0x7b1000, 0x00400},
403 {"user-config", 0x7c0000, 0x10000},
404 {"default-config", 0x7d0000, 0x10000},
405 {"log", 0x7e0000, 0x10000},
406 {"radio", 0x7f0000, 0x10000},
410 .first_sysupgrade_partition
= "os-image",
411 .last_sysupgrade_partition
= "support-list",
414 /** Firmware layout for the CPE510 V3 */
417 .vendor
= "CPE510(TP-LINK|UN|N300-5):3.0\r\n",
420 "CPE510(TP-LINK|EU|N300-5|00000000):3.0\r\n"
421 "CPE510(TP-LINK|EU|N300-5|45550000):3.0\r\n"
422 "CPE510(TP-LINK|EU|N300-5|55530000):3.0\r\n"
423 "CPE510(TP-LINK|UN|N300-5|00000000):3.0\r\n"
424 "CPE510(TP-LINK|UN|N300-5|45550000):3.0\r\n"
425 "CPE510(TP-LINK|UN|N300-5|55530000):3.0\r\n"
426 "CPE510(TP-LINK|US|N300-5|00000000):3.0\r\n"
427 "CPE510(TP-LINK|US|N300-5|45550000):3.0\r\n"
428 "CPE510(TP-LINK|US|N300-5|55530000):3.0\r\n"
429 "CPE510(TP-LINK|UN|N300-5):3.0\r\n"
430 "CPE510(TP-LINK|EU|N300-5):3.0\r\n"
431 "CPE510(TP-LINK|US|N300-5):3.0\r\n"
432 "CPE510(TP-LINK|UN|N300-5|00000000):3.20\r\n"
433 "CPE510(TP-LINK|US|N300-5|55530000):3.20\r\n"
434 "CPE510(TP-LINK|EU|N300-5|45550000):3.20\r\n",
439 {"fs-uboot", 0x00000, 0x20000},
440 {"partition-table", 0x20000, 0x02000},
441 {"default-mac", 0x30000, 0x00020},
442 {"product-info", 0x31100, 0x00100},
443 {"signature", 0x32000, 0x00400},
444 {"firmware", 0x40000, 0x770000},
445 {"soft-version", 0x7b0000, 0x00100},
446 {"support-list", 0x7b1000, 0x00400},
447 {"user-config", 0x7c0000, 0x10000},
448 {"default-config", 0x7d0000, 0x10000},
449 {"log", 0x7e0000, 0x10000},
450 {"radio", 0x7f0000, 0x10000},
454 .first_sysupgrade_partition
= "os-image",
455 .last_sysupgrade_partition
= "support-list",
458 /** Firmware layout for the CPE610V1 */
461 .vendor
= "CPE610(TP-LINK|UN|N300-5|00000000):1.0\r\n",
464 "CPE610(TP-LINK|EU|N300-5|00000000):1.0\r\n"
465 "CPE610(TP-LINK|EU|N300-5|45550000):1.0\r\n"
466 "CPE610(TP-LINK|EU|N300-5|55530000):1.0\r\n"
467 "CPE610(TP-LINK|UN|N300-5|00000000):1.0\r\n"
468 "CPE610(TP-LINK|UN|N300-5|45550000):1.0\r\n"
469 "CPE610(TP-LINK|UN|N300-5|55530000):1.0\r\n"
470 "CPE610(TP-LINK|US|N300-5|55530000):1.0\r\n"
471 "CPE610(TP-LINK|UN|N300-5):1.0\r\n"
472 "CPE610(TP-LINK|EU|N300-5):1.0\r\n"
473 "CPE610(TP-LINK|US|N300-5):1.0\r\n",
478 {"fs-uboot", 0x00000, 0x20000},
479 {"partition-table", 0x20000, 0x02000},
480 {"default-mac", 0x30000, 0x00020},
481 {"product-info", 0x31100, 0x00100},
482 {"signature", 0x32000, 0x00400},
483 {"firmware", 0x40000, 0x770000},
484 {"soft-version", 0x7b0000, 0x00100},
485 {"support-list", 0x7b1000, 0x00400},
486 {"user-config", 0x7c0000, 0x10000},
487 {"default-config", 0x7d0000, 0x10000},
488 {"log", 0x7e0000, 0x10000},
489 {"radio", 0x7f0000, 0x10000},
493 .first_sysupgrade_partition
= "os-image",
494 .last_sysupgrade_partition
= "support-list",
497 /** Firmware layout for the CPE610V2 */
500 .vendor
= "CPE610(TP-LINK|UN|N300-5|00000000):2.0\r\n",
503 "CPE610(TP-LINK|EU|N300-5|00000000):2.0\r\n"
504 "CPE610(TP-LINK|EU|N300-5|45550000):2.0\r\n"
505 "CPE610(TP-LINK|EU|N300-5|55530000):2.0\r\n"
506 "CPE610(TP-LINK|UN|N300-5|00000000):2.0\r\n"
507 "CPE610(TP-LINK|UN|N300-5|45550000):2.0\r\n"
508 "CPE610(TP-LINK|UN|N300-5|55530000):2.0\r\n"
509 "CPE610(TP-LINK|US|N300-5|55530000):2.0\r\n"
510 "CPE610(TP-LINK|UN|N300-5):2.0\r\n"
511 "CPE610(TP-LINK|EU|N300-5):2.0\r\n"
512 "CPE610(TP-LINK|US|N300-5):2.0\r\n",
517 {"fs-uboot", 0x00000, 0x20000},
518 {"partition-table", 0x20000, 0x02000},
519 {"default-mac", 0x30000, 0x00020},
520 {"product-info", 0x31100, 0x00100},
521 {"signature", 0x32000, 0x00400},
522 {"firmware", 0x40000, 0x770000},
523 {"soft-version", 0x7b0000, 0x00100},
524 {"support-list", 0x7b1000, 0x00400},
525 {"user-config", 0x7c0000, 0x10000},
526 {"default-config", 0x7d0000, 0x10000},
527 {"log", 0x7e0000, 0x10000},
528 {"radio", 0x7f0000, 0x10000},
532 .first_sysupgrade_partition
= "os-image",
533 .last_sysupgrade_partition
= "support-list",
538 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
541 "WBS210(TP-LINK|UN|N300-2):1.20\r\n"
542 "WBS210(TP-LINK|US|N300-2):1.20\r\n"
543 "WBS210(TP-LINK|EU|N300-2):1.20\r\n",
548 {"fs-uboot", 0x00000, 0x20000},
549 {"partition-table", 0x20000, 0x02000},
550 {"default-mac", 0x30000, 0x00020},
551 {"product-info", 0x31100, 0x00100},
552 {"signature", 0x32000, 0x00400},
553 {"firmware", 0x40000, 0x770000},
554 {"soft-version", 0x7b0000, 0x00100},
555 {"support-list", 0x7b1000, 0x00400},
556 {"user-config", 0x7c0000, 0x10000},
557 {"default-config", 0x7d0000, 0x10000},
558 {"log", 0x7e0000, 0x10000},
559 {"radio", 0x7f0000, 0x10000},
563 .first_sysupgrade_partition
= "os-image",
564 .last_sysupgrade_partition
= "support-list",
569 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
572 "WBS210(TP-LINK|UN|N300-2|00000000):2.0\r\n"
573 "WBS210(TP-LINK|US|N300-2|55530000):2.0\r\n"
574 "WBS210(TP-LINK|EU|N300-2|45550000):2.0\r\n",
579 {"fs-uboot", 0x00000, 0x20000},
580 {"partition-table", 0x20000, 0x02000},
581 {"default-mac", 0x30000, 0x00020},
582 {"product-info", 0x31100, 0x00100},
583 {"signature", 0x32000, 0x00400},
584 {"firmware", 0x40000, 0x770000},
585 {"soft-version", 0x7b0000, 0x00100},
586 {"support-list", 0x7b1000, 0x00400},
587 {"user-config", 0x7c0000, 0x10000},
588 {"default-config", 0x7d0000, 0x10000},
589 {"log", 0x7e0000, 0x10000},
590 {"radio", 0x7f0000, 0x10000},
594 .first_sysupgrade_partition
= "os-image",
595 .last_sysupgrade_partition
= "support-list",
600 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
603 "WBS510(TP-LINK|UN|N300-5):1.20\r\n"
604 "WBS510(TP-LINK|US|N300-5):1.20\r\n"
605 "WBS510(TP-LINK|EU|N300-5):1.20\r\n"
606 "WBS510(TP-LINK|CA|N300-5):1.20\r\n",
611 {"fs-uboot", 0x00000, 0x20000},
612 {"partition-table", 0x20000, 0x02000},
613 {"default-mac", 0x30000, 0x00020},
614 {"product-info", 0x31100, 0x00100},
615 {"signature", 0x32000, 0x00400},
616 {"firmware", 0x40000, 0x770000},
617 {"soft-version", 0x7b0000, 0x00100},
618 {"support-list", 0x7b1000, 0x00400},
619 {"user-config", 0x7c0000, 0x10000},
620 {"default-config", 0x7d0000, 0x10000},
621 {"log", 0x7e0000, 0x10000},
622 {"radio", 0x7f0000, 0x10000},
626 .first_sysupgrade_partition
= "os-image",
627 .last_sysupgrade_partition
= "support-list",
632 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
635 "WBS510(TP-LINK|UN|N300-5|00000000):2.0\r\n"
636 "WBS510(TP-LINK|US|N300-5|55530000):2.0\r\n"
637 "WBS510(TP-LINK|EU|N300-5|45550000):2.0\r\n"
638 "WBS510(TP-LINK|CA|N300-5|43410000):2.0\r\n",
643 {"fs-uboot", 0x00000, 0x20000},
644 {"partition-table", 0x20000, 0x02000},
645 {"default-mac", 0x30000, 0x00020},
646 {"product-info", 0x31100, 0x00100},
647 {"signature", 0x32000, 0x00400},
648 {"firmware", 0x40000, 0x770000},
649 {"soft-version", 0x7b0000, 0x00100},
650 {"support-list", 0x7b1000, 0x00400},
651 {"user-config", 0x7c0000, 0x10000},
652 {"default-config", 0x7d0000, 0x10000},
653 {"log", 0x7e0000, 0x10000},
654 {"radio", 0x7f0000, 0x10000},
658 .first_sysupgrade_partition
= "os-image",
659 .last_sysupgrade_partition
= "support-list",
662 /** Firmware layout for the AD7200 */
668 "{product_name:AD7200,product_ver:1.0.0,special_id:00000000}\r\n",
673 {"SBL1", 0x00000, 0x20000},
674 {"MIBIB", 0x20000, 0x20000},
675 {"SBL2", 0x40000, 0x20000},
676 {"SBL3", 0x60000, 0x30000},
677 {"DDRCONFIG", 0x90000, 0x10000},
678 {"SSD", 0xa0000, 0x10000},
679 {"TZ", 0xb0000, 0x30000},
680 {"RPM", 0xe0000, 0x20000},
681 {"fs-uboot", 0x100000, 0x70000},
682 {"uboot-env", 0x170000, 0x40000},
683 {"radio", 0x1b0000, 0x40000},
684 {"os-image", 0x1f0000, 0x400000},
685 {"file-system", 0x5f0000, 0x1900000},
686 {"default-mac", 0x1ef0000, 0x00200},
687 {"pin", 0x1ef0200, 0x00200},
688 {"device-id", 0x1ef0400, 0x00200},
689 {"product-info", 0x1ef0600, 0x0fa00},
690 {"partition-table", 0x1f00000, 0x10000},
691 {"soft-version", 0x1f10000, 0x10000},
692 {"support-list", 0x1f20000, 0x10000},
693 {"profile", 0x1f30000, 0x10000},
694 {"default-config", 0x1f40000, 0x10000},
695 {"user-config", 0x1f50000, 0x40000},
696 {"qos-db", 0x1f90000, 0x40000},
697 {"usb-config", 0x1fd0000, 0x10000},
698 {"log", 0x1fe0000, 0x20000},
702 .first_sysupgrade_partition
= "os-image",
703 .last_sysupgrade_partition
= "file-system"
706 /** Firmware layout for the C2600 */
712 "{product_name:Archer C2600,product_ver:1.0.0,special_id:00000000}\r\n",
717 We use a bigger os-image partition than the stock images (and thus
718 smaller file-system), as our kernel doesn't fit in the stock firmware's
719 2 MB os-image since kernel 4.14.
722 {"SBL1", 0x00000, 0x20000},
723 {"MIBIB", 0x20000, 0x20000},
724 {"SBL2", 0x40000, 0x20000},
725 {"SBL3", 0x60000, 0x30000},
726 {"DDRCONFIG", 0x90000, 0x10000},
727 {"SSD", 0xa0000, 0x10000},
728 {"TZ", 0xb0000, 0x30000},
729 {"RPM", 0xe0000, 0x20000},
730 {"fs-uboot", 0x100000, 0x70000},
731 {"uboot-env", 0x170000, 0x40000},
732 {"radio", 0x1b0000, 0x40000},
733 {"os-image", 0x1f0000, 0x400000}, /* Stock: base 0x1f0000 size 0x200000 */
734 {"file-system", 0x5f0000, 0x1900000}, /* Stock: base 0x3f0000 size 0x1b00000 */
735 {"default-mac", 0x1ef0000, 0x00200},
736 {"pin", 0x1ef0200, 0x00200},
737 {"product-info", 0x1ef0400, 0x0fc00},
738 {"partition-table", 0x1f00000, 0x10000},
739 {"soft-version", 0x1f10000, 0x10000},
740 {"support-list", 0x1f20000, 0x10000},
741 {"profile", 0x1f30000, 0x10000},
742 {"default-config", 0x1f40000, 0x10000},
743 {"user-config", 0x1f50000, 0x40000},
744 {"qos-db", 0x1f90000, 0x40000},
745 {"usb-config", 0x1fd0000, 0x10000},
746 {"log", 0x1fe0000, 0x20000},
750 .first_sysupgrade_partition
= "os-image",
751 .last_sysupgrade_partition
= "file-system"
754 /** Firmware layout for the A7-V5 */
756 .id
= "ARCHER-A7-V5",
759 "{product_name:Archer A7,product_ver:5.0.0,special_id:45550000}\n"
760 "{product_name:Archer A7,product_ver:5.0.0,special_id:55530000}\n"
761 "{product_name:Archer A7,product_ver:5.0.0,special_id:43410000}\n"
762 "{product_name:Archer A7,product_ver:5.0.0,special_id:4A500000}\n"
763 "{product_name:Archer A7,product_ver:5.0.0,special_id:54570000}\n"
764 "{product_name:Archer A7,product_ver:5.0.0,special_id:52550000}\n",
766 .soft_ver
= "soft_ver:1.0.0\n",
768 /* We're using a dynamic kernel/rootfs split here */
770 {"factory-boot", 0x00000, 0x20000},
771 {"fs-uboot", 0x20000, 0x20000},
772 {"firmware", 0x40000, 0xec0000}, /* Stock: name os-image base 0x40000 size 0x120000 */
773 /* Stock: name file-system base 0x160000 size 0xda0000 */
774 {"default-mac", 0xf40000, 0x00200},
775 {"pin", 0xf40200, 0x00200},
776 {"device-id", 0xf40400, 0x00100},
777 {"product-info", 0xf40500, 0x0fb00},
778 {"soft-version", 0xf50000, 0x00100},
779 {"extra-para", 0xf51000, 0x01000},
780 {"support-list", 0xf52000, 0x0a000},
781 {"profile", 0xf5c000, 0x04000},
782 {"default-config", 0xf60000, 0x10000},
783 {"user-config", 0xf70000, 0x40000},
784 {"certificate", 0xfb0000, 0x10000},
785 {"partition-table", 0xfc0000, 0x10000},
786 {"log", 0xfd0000, 0x20000},
787 {"radio", 0xff0000, 0x10000},
791 .first_sysupgrade_partition
= "os-image",
792 .last_sysupgrade_partition
= "file-system",
795 /** Firmware layout for the C2v3 */
797 .id
= "ARCHER-C2-V3",
800 "{product_name:ArcherC2,product_ver:3.0.0,special_id:00000000}\n"
801 "{product_name:ArcherC2,product_ver:3.0.0,special_id:55530000}\n"
802 "{product_name:ArcherC2,product_ver:3.0.0,special_id:45550000}\n",
804 .soft_ver
= "soft_ver:3.0.1\n",
806 /** We're using a dynamic kernel/rootfs split here */
809 {"factory-boot", 0x00000, 0x20000},
810 {"fs-uboot", 0x20000, 0x10000},
811 {"firmware", 0x30000, 0x7a0000},
812 {"user-config", 0x7d0000, 0x04000},
813 {"default-mac", 0x7e0000, 0x00100},
814 {"device-id", 0x7e0100, 0x00100},
815 {"extra-para", 0x7e0200, 0x00100},
816 {"pin", 0x7e0300, 0x00100},
817 {"support-list", 0x7e0400, 0x00400},
818 {"soft-version", 0x7e0800, 0x00400},
819 {"product-info", 0x7e0c00, 0x01400},
820 {"partition-table", 0x7e2000, 0x01000},
821 {"profile", 0x7e3000, 0x01000},
822 {"default-config", 0x7e4000, 0x04000},
823 {"merge-config", 0x7ec000, 0x02000},
824 {"qos-db", 0x7ee000, 0x02000},
825 {"radio", 0x7f0000, 0x10000},
829 .first_sysupgrade_partition
= "os-image",
830 .last_sysupgrade_partition
= "file-system",
833 /** Firmware layout for the C25v1 */
835 .id
= "ARCHER-C25-V1",
838 "{product_name:ArcherC25,product_ver:1.0.0,special_id:00000000}\n"
839 "{product_name:ArcherC25,product_ver:1.0.0,special_id:55530000}\n"
840 "{product_name:ArcherC25,product_ver:1.0.0,special_id:45550000}\n",
842 .soft_ver
= "soft_ver:1.0.0\n",
844 /* We're using a dynamic kernel/rootfs split here */
846 {"factory-boot", 0x00000, 0x20000},
847 {"fs-uboot", 0x20000, 0x10000},
848 {"firmware", 0x30000, 0x7a0000}, /* Stock: name os-image base 0x30000 size 0x100000 */
849 /* Stock: name file-system base 0x130000 size 0x6a0000 */
850 {"user-config", 0x7d0000, 0x04000},
851 {"default-mac", 0x7e0000, 0x00100},
852 {"device-id", 0x7e0100, 0x00100},
853 {"extra-para", 0x7e0200, 0x00100},
854 {"pin", 0x7e0300, 0x00100},
855 {"support-list", 0x7e0400, 0x00400},
856 {"soft-version", 0x7e0800, 0x00400},
857 {"product-info", 0x7e0c00, 0x01400},
858 {"partition-table", 0x7e2000, 0x01000},
859 {"profile", 0x7e3000, 0x01000},
860 {"default-config", 0x7e4000, 0x04000},
861 {"merge-config", 0x7ec000, 0x02000},
862 {"qos-db", 0x7ee000, 0x02000},
863 {"radio", 0x7f0000, 0x10000},
867 .first_sysupgrade_partition
= "os-image",
868 .last_sysupgrade_partition
= "file-system",
871 /** Firmware layout for the C58v1 */
873 .id
= "ARCHER-C58-V1",
877 "{product_name:Archer C58,product_ver:1.0.0,special_id:00000000}\r\n"
878 "{product_name:Archer C58,product_ver:1.0.0,special_id:45550000}\r\n"
879 "{product_name:Archer C58,product_ver:1.0.0,special_id:55530000}\r\n",
881 .soft_ver
= "soft_ver:1.0.0\n",
884 {"fs-uboot", 0x00000, 0x10000},
885 {"default-mac", 0x10000, 0x00200},
886 {"pin", 0x10200, 0x00200},
887 {"product-info", 0x10400, 0x00100},
888 {"partition-table", 0x10500, 0x00800},
889 {"soft-version", 0x11300, 0x00200},
890 {"support-list", 0x11500, 0x00100},
891 {"device-id", 0x11600, 0x00100},
892 {"profile", 0x11700, 0x03900},
893 {"default-config", 0x15000, 0x04000},
894 {"user-config", 0x19000, 0x04000},
895 {"firmware", 0x20000, 0x7c8000},
896 {"certyficate", 0x7e8000, 0x08000},
897 {"radio", 0x7f0000, 0x10000},
901 .first_sysupgrade_partition
= "os-image",
902 .last_sysupgrade_partition
= "file-system",
905 /** Firmware layout for the C59v1 */
907 .id
= "ARCHER-C59-V1",
911 "{product_name:Archer C59,product_ver:1.0.0,special_id:00000000}\r\n"
912 "{product_name:Archer C59,product_ver:1.0.0,special_id:45550000}\r\n"
913 "{product_name:Archer C59,product_ver:1.0.0,special_id:52550000}\r\n"
914 "{product_name:Archer C59,product_ver:1.0.0,special_id:55530000}\r\n",
916 .soft_ver
= "soft_ver:1.0.0\n",
918 /* We're using a dynamic kernel/rootfs split here */
920 {"fs-uboot", 0x00000, 0x10000},
921 {"default-mac", 0x10000, 0x00200},
922 {"pin", 0x10200, 0x00200},
923 {"device-id", 0x10400, 0x00100},
924 {"product-info", 0x10500, 0x0fb00},
925 {"firmware", 0x20000, 0xe30000},
926 {"partition-table", 0xe50000, 0x10000},
927 {"soft-version", 0xe60000, 0x10000},
928 {"support-list", 0xe70000, 0x10000},
929 {"profile", 0xe80000, 0x10000},
930 {"default-config", 0xe90000, 0x10000},
931 {"user-config", 0xea0000, 0x40000},
932 {"usb-config", 0xee0000, 0x10000},
933 {"certificate", 0xef0000, 0x10000},
934 {"qos-db", 0xf00000, 0x40000},
935 {"log", 0xfe0000, 0x10000},
936 {"radio", 0xff0000, 0x10000},
940 .first_sysupgrade_partition
= "os-image",
941 .last_sysupgrade_partition
= "file-system",
944 /** Firmware layout for the C59v2 */
946 .id
= "ARCHER-C59-V2",
950 "{product_name:Archer C59,product_ver:2.0.0,special_id:00000000}\r\n"
951 "{product_name:Archer C59,product_ver:2.0.0,special_id:45550000}\r\n"
952 "{product_name:Archer C59,product_ver:2.0.0,special_id:55530000}\r\n",
954 .soft_ver
= "soft_ver:2.0.0 Build 20161206 rel.7303\n",
956 /** We're using a dynamic kernel/rootfs split here */
958 {"factory-boot", 0x00000, 0x20000},
959 {"fs-uboot", 0x20000, 0x10000},
960 {"default-mac", 0x30000, 0x00200},
961 {"pin", 0x30200, 0x00200},
962 {"device-id", 0x30400, 0x00100},
963 {"product-info", 0x30500, 0x0fb00},
964 {"firmware", 0x40000, 0xe10000},
965 {"partition-table", 0xe50000, 0x10000},
966 {"soft-version", 0xe60000, 0x10000},
967 {"support-list", 0xe70000, 0x10000},
968 {"profile", 0xe80000, 0x10000},
969 {"default-config", 0xe90000, 0x10000},
970 {"user-config", 0xea0000, 0x40000},
971 {"usb-config", 0xee0000, 0x10000},
972 {"certificate", 0xef0000, 0x10000},
973 {"extra-para", 0xf00000, 0x10000},
974 {"qos-db", 0xf10000, 0x30000},
975 {"log", 0xfe0000, 0x10000},
976 {"radio", 0xff0000, 0x10000},
980 .first_sysupgrade_partition
= "os-image",
981 .last_sysupgrade_partition
= "file-system",
984 /** Firmware layout for the Archer C6 v2 (EU/RU/JP) */
986 .id
= "ARCHER-C6-V2",
990 "{product_name:Archer C6,product_ver:2.0.0,special_id:45550000}\r\n"
991 "{product_name:Archer C6,product_ver:2.0.0,special_id:52550000}\r\n"
992 "{product_name:Archer C6,product_ver:2.0.0,special_id:4A500000}\r\n",
994 .soft_ver
= "soft_ver:1.9.1\n",
997 {"fs-uboot", 0x00000, 0x20000},
998 {"default-mac", 0x20000, 0x00200},
999 {"pin", 0x20200, 0x00100},
1000 {"product-info", 0x20300, 0x00200},
1001 {"device-id", 0x20500, 0x0fb00},
1002 {"firmware", 0x30000, 0x7a9400},
1003 {"soft-version", 0x7d9400, 0x00100},
1004 {"extra-para", 0x7d9500, 0x00100},
1005 {"support-list", 0x7d9600, 0x00200},
1006 {"profile", 0x7d9800, 0x03000},
1007 {"default-config", 0x7dc800, 0x03000},
1008 {"partition-table", 0x7df800, 0x00800},
1009 {"user-config", 0x7e0000, 0x0c000},
1010 {"certificate", 0x7ec000, 0x04000},
1011 {"radio", 0x7f0000, 0x10000},
1015 .first_sysupgrade_partition
= "os-image",
1016 .last_sysupgrade_partition
= "file-system",
1019 /** Firmware layout for the Archer C6 v2 (US) and A6 v2 (US/TW) */
1021 .id
= "ARCHER-C6-V2-US",
1025 "{product_name:Archer A6,product_ver:2.0.0,special_id:55530000}\n"
1026 "{product_name:Archer A6,product_ver:2.0.0,special_id:54570000}\n"
1027 "{product_name:Archer C6,product_ver:2.0.0,special_id:55530000}\n",
1029 .soft_ver
= "soft_ver:1.9.1\n",
1032 {"factory-boot", 0x00000, 0x20000},
1033 {"default-mac", 0x20000, 0x00200},
1034 {"pin", 0x20200, 0x00100},
1035 {"product-info", 0x20300, 0x00200},
1036 {"device-id", 0x20500, 0x0fb00},
1037 {"fs-uboot", 0x30000, 0x20000},
1038 {"firmware", 0x50000, 0xf89400},
1039 {"soft-version", 0xfd9400, 0x00100},
1040 {"extra-para", 0xfd9500, 0x00100},
1041 {"support-list", 0xfd9600, 0x00200},
1042 {"profile", 0xfd9800, 0x03000},
1043 {"default-config", 0xfdc800, 0x03000},
1044 {"partition-table", 0xfdf800, 0x00800},
1045 {"user-config", 0xfe0000, 0x0c000},
1046 {"certificate", 0xfec000, 0x04000},
1047 {"radio", 0xff0000, 0x10000},
1050 .first_sysupgrade_partition
= "os-image",
1051 .last_sysupgrade_partition
= "file-system",
1053 /** Firmware layout for the Archer A6 v3 */
1055 .id
= "ARCHER-A6-V3",
1059 "{product_name:Archer A6,product_ver:3.0.0,special_id:55530000}\n"
1060 "{product_name:Archer A6,product_ver:3.0.0,special_id:54570000}\n",
1062 .soft_ver
= "soft_ver:1.0.5\n",
1065 {"fs-uboot", 0x00000, 0x40000},
1066 {"firmware", 0x40000, 0xf60000},
1067 {"default-mac", 0xfa0000, 0x00200},
1068 {"pin", 0xfa0200, 0x00100},
1069 {"device-id", 0xfa0300, 0x00100},
1070 {"product-info", 0xfa0400, 0x0fc00},
1071 {"default-config", 0xfb0000, 0x08000},
1072 {"ap-def-config", 0xfb8000, 0x08000},
1073 {"user-config", 0xfc0000, 0x0a000},
1074 {"ag-config", 0xfca000, 0x04000},
1075 {"certificate", 0xfce000, 0x02000},
1076 {"ap-config", 0xfd0000, 0x06000},
1077 {"router-config", 0xfd6000, 0x06000},
1078 {"favicon", 0xfdc000, 0x02000},
1079 {"logo", 0xfde000, 0x02000},
1080 {"partition-table", 0xfe0000, 0x00800},
1081 {"soft-version", 0xfe0800, 0x00100},
1082 {"support-list", 0xfe0900, 0x00200},
1083 {"profile", 0xfe0b00, 0x03000},
1084 {"extra-para", 0xfe3b00, 0x00100},
1085 {"radio", 0xff0000, 0x10000},
1088 .first_sysupgrade_partition
= "os-image",
1089 .last_sysupgrade_partition
= "file-system",
1091 /** Firmware layout for the Archer C6U v1 */
1093 .id
= "ARCHER-C6U-V1",
1097 "{product_name:Archer C6U,product_ver:1.0.0,special_id:45550000}\n",
1099 .soft_ver
= "soft_ver:1.0.2\n",
1102 {"fs-uboot", 0x00000, 0x40000},
1103 {"firmware", 0x40000, 0xf60000},
1104 {"default-mac", 0xfa0000, 0x00200},
1105 {"pin", 0xfa0200, 0x00100},
1106 {"device-id", 0xfa0300, 0x00100},
1107 {"product-info", 0xfa0400, 0x0fc00},
1108 {"default-config", 0xfb0000, 0x08000},
1109 {"ap-def-config", 0xfb8000, 0x08000},
1110 {"user-config", 0xfc0000, 0x0c000},
1111 {"certificate", 0xfcc000, 0x04000},
1112 {"ap-config", 0xfd0000, 0x08000},
1113 {"router-config", 0xfd8000, 0x08000},
1114 {"partition-table", 0xfe0000, 0x00800},
1115 {"soft-version", 0xfe0800, 0x00100},
1116 {"support-list", 0xfe0900, 0x00200},
1117 {"profile", 0xfe0b00, 0x03000},
1118 {"extra-para", 0xfe3b00, 0x00100},
1119 {"radio", 0xff0000, 0x10000},
1122 .first_sysupgrade_partition
= "os-image",
1123 .last_sysupgrade_partition
= "file-system",
1125 /** Firmware layout for the C60v1 */
1127 .id
= "ARCHER-C60-V1",
1131 "{product_name:Archer C60,product_ver:1.0.0,special_id:00000000}\r\n"
1132 "{product_name:Archer C60,product_ver:1.0.0,special_id:45550000}\r\n"
1133 "{product_name:Archer C60,product_ver:1.0.0,special_id:55530000}\r\n",
1135 .soft_ver
= "soft_ver:1.0.0\n",
1138 {"fs-uboot", 0x00000, 0x10000},
1139 {"default-mac", 0x10000, 0x00200},
1140 {"pin", 0x10200, 0x00200},
1141 {"product-info", 0x10400, 0x00100},
1142 {"partition-table", 0x10500, 0x00800},
1143 {"soft-version", 0x11300, 0x00200},
1144 {"support-list", 0x11500, 0x00100},
1145 {"device-id", 0x11600, 0x00100},
1146 {"profile", 0x11700, 0x03900},
1147 {"default-config", 0x15000, 0x04000},
1148 {"user-config", 0x19000, 0x04000},
1149 {"firmware", 0x20000, 0x7c8000},
1150 {"certyficate", 0x7e8000, 0x08000},
1151 {"radio", 0x7f0000, 0x10000},
1155 .first_sysupgrade_partition
= "os-image",
1156 .last_sysupgrade_partition
= "file-system",
1159 /** Firmware layout for the C60v2 */
1161 .id
= "ARCHER-C60-V2",
1165 "{product_name:Archer C60,product_ver:2.0.0,special_id:42520000}\r\n"
1166 "{product_name:Archer C60,product_ver:2.0.0,special_id:45550000}\r\n"
1167 "{product_name:Archer C60,product_ver:2.0.0,special_id:55530000}\r\n",
1169 .soft_ver
= "soft_ver:2.0.0\n",
1172 {"factory-boot", 0x00000, 0x1fb00},
1173 {"default-mac", 0x1fb00, 0x00200},
1174 {"pin", 0x1fd00, 0x00100},
1175 {"product-info", 0x1fe00, 0x00100},
1176 {"device-id", 0x1ff00, 0x00100},
1177 {"fs-uboot", 0x20000, 0x10000},
1178 {"firmware", 0x30000, 0x7a0000},
1179 {"soft-version", 0x7d9500, 0x00100},
1180 {"support-list", 0x7d9600, 0x00100},
1181 {"extra-para", 0x7d9700, 0x00100},
1182 {"profile", 0x7d9800, 0x03000},
1183 {"default-config", 0x7dc800, 0x03000},
1184 {"partition-table", 0x7df800, 0x00800},
1185 {"user-config", 0x7e0000, 0x0c000},
1186 {"certificate", 0x7ec000, 0x04000},
1187 {"radio", 0x7f0000, 0x10000},
1191 .first_sysupgrade_partition
= "os-image",
1192 .last_sysupgrade_partition
= "file-system",
1195 /** Firmware layout for the C60v3 */
1197 .id
= "ARCHER-C60-V3",
1201 "{product_name:Archer C60,product_ver:3.0.0,special_id:42520000}\r\n"
1202 "{product_name:Archer C60,product_ver:3.0.0,special_id:45550000}\r\n"
1203 "{product_name:Archer C60,product_ver:3.0.0,special_id:55530000}\r\n",
1205 .soft_ver
= "soft_ver:3.0.0\n",
1208 {"factory-boot", 0x00000, 0x1fb00},
1209 {"default-mac", 0x1fb00, 0x00200},
1210 {"pin", 0x1fd00, 0x00100},
1211 {"product-info", 0x1fe00, 0x00100},
1212 {"device-id", 0x1ff00, 0x00100},
1213 {"fs-uboot", 0x20000, 0x10000},
1214 {"firmware", 0x30000, 0x7a0000},
1215 {"soft-version", 0x7d9500, 0x00100},
1216 {"support-list", 0x7d9600, 0x00100},
1217 {"extra-para", 0x7d9700, 0x00100},
1218 {"profile", 0x7d9800, 0x03000},
1219 {"default-config", 0x7dc800, 0x03000},
1220 {"partition-table", 0x7df800, 0x00800},
1221 {"user-config", 0x7e0000, 0x0c000},
1222 {"certificate", 0x7ec000, 0x04000},
1223 {"radio", 0x7f0000, 0x10000},
1227 .first_sysupgrade_partition
= "os-image",
1228 .last_sysupgrade_partition
= "file-system",
1231 /** Firmware layout for the C5 */
1233 .id
= "ARCHER-C5-V2",
1237 "{product_name:ArcherC5,product_ver:2.0.0,special_id:00000000}\r\n"
1238 "{product_name:ArcherC5,product_ver:2.0.0,special_id:55530000}\r\n"
1239 "{product_name:ArcherC5,product_ver:2.0.0,special_id:4A500000}\r\n", /* JP version */
1244 {"fs-uboot", 0x00000, 0x40000},
1245 {"os-image", 0x40000, 0x200000},
1246 {"file-system", 0x240000, 0xc00000},
1247 {"default-mac", 0xe40000, 0x00200},
1248 {"pin", 0xe40200, 0x00200},
1249 {"product-info", 0xe40400, 0x00200},
1250 {"partition-table", 0xe50000, 0x10000},
1251 {"soft-version", 0xe60000, 0x00200},
1252 {"support-list", 0xe61000, 0x0f000},
1253 {"profile", 0xe70000, 0x10000},
1254 {"default-config", 0xe80000, 0x10000},
1255 {"user-config", 0xe90000, 0x50000},
1256 {"log", 0xee0000, 0x100000},
1257 {"radio_bk", 0xfe0000, 0x10000},
1258 {"radio", 0xff0000, 0x10000},
1262 .first_sysupgrade_partition
= "os-image",
1263 .last_sysupgrade_partition
= "file-system"
1266 /** Firmware layout for the C7 */
1268 .id
= "ARCHER-C7-V4",
1271 "{product_name:Archer C7,product_ver:4.0.0,special_id:00000000}\n"
1272 "{product_name:Archer C7,product_ver:4.0.0,special_id:41550000}\n"
1273 "{product_name:Archer C7,product_ver:4.0.0,special_id:45550000}\n"
1274 "{product_name:Archer C7,product_ver:4.0.0,special_id:4B520000}\n"
1275 "{product_name:Archer C7,product_ver:4.0.0,special_id:42520000}\n"
1276 "{product_name:Archer C7,product_ver:4.0.0,special_id:4A500000}\n"
1277 "{product_name:Archer C7,product_ver:4.0.0,special_id:52550000}\n"
1278 "{product_name:Archer C7,product_ver:4.0.0,special_id:54570000}\n"
1279 "{product_name:Archer C7,product_ver:4.0.0,special_id:55530000}\n"
1280 "{product_name:Archer C7,product_ver:4.0.0,special_id:43410000}\n",
1282 .soft_ver
= "soft_ver:1.0.0\n",
1284 /* We're using a dynamic kernel/rootfs split here */
1286 {"factory-boot", 0x00000, 0x20000},
1287 {"fs-uboot", 0x20000, 0x20000},
1288 {"firmware", 0x40000, 0xEC0000}, /* Stock: name os-image base 0x40000 size 0x120000 */
1289 /* Stock: name file-system base 0x160000 size 0xda0000 */
1290 {"default-mac", 0xf00000, 0x00200},
1291 {"pin", 0xf00200, 0x00200},
1292 {"device-id", 0xf00400, 0x00100},
1293 {"product-info", 0xf00500, 0x0fb00},
1294 {"soft-version", 0xf10000, 0x00100},
1295 {"extra-para", 0xf11000, 0x01000},
1296 {"support-list", 0xf12000, 0x0a000},
1297 {"profile", 0xf1c000, 0x04000},
1298 {"default-config", 0xf20000, 0x10000},
1299 {"user-config", 0xf30000, 0x40000},
1300 {"qos-db", 0xf70000, 0x40000},
1301 {"certificate", 0xfb0000, 0x10000},
1302 {"partition-table", 0xfc0000, 0x10000},
1303 {"log", 0xfd0000, 0x20000},
1304 {"radio", 0xff0000, 0x10000},
1308 .first_sysupgrade_partition
= "os-image",
1309 .last_sysupgrade_partition
= "file-system",
1312 /** Firmware layout for the C7 v5*/
1314 .id
= "ARCHER-C7-V5",
1317 "{product_name:Archer C7,product_ver:5.0.0,special_id:00000000}\n"
1318 "{product_name:Archer C7,product_ver:5.0.0,special_id:45550000}\n"
1319 "{product_name:Archer C7,product_ver:5.0.0,special_id:55530000}\n"
1320 "{product_name:Archer C7,product_ver:5.0.0,special_id:43410000}\n"
1321 "{product_name:Archer C7,product_ver:5.0.0,special_id:4A500000}\n"
1322 "{product_name:Archer C7,product_ver:5.0.0,special_id:54570000}\n"
1323 "{product_name:Archer C7,product_ver:5.0.0,special_id:52550000}\n"
1324 "{product_name:Archer C7,product_ver:5.0.0,special_id:4B520000}\n",
1327 .soft_ver
= "soft_ver:7.0.0\n",
1329 /* We're using a dynamic kernel/rootfs split here */
1331 {"factory-boot", 0x00000, 0x20000},
1332 {"fs-uboot", 0x20000, 0x20000},
1333 {"partition-table", 0x40000, 0x10000},
1334 {"radio", 0x50000, 0x10000},
1335 {"default-mac", 0x60000, 0x00200},
1336 {"pin", 0x60200, 0x00200},
1337 {"device-id", 0x60400, 0x00100},
1338 {"product-info", 0x60500, 0x0fb00},
1339 {"soft-version", 0x70000, 0x01000},
1340 {"extra-para", 0x71000, 0x01000},
1341 {"support-list", 0x72000, 0x0a000},
1342 {"profile", 0x7c000, 0x04000},
1343 {"user-config", 0x80000, 0x40000},
1346 {"firmware", 0xc0000, 0xf00000}, /* Stock: name os-image base 0xc0000 size 0x120000 */
1347 /* Stock: name file-system base 0x1e0000 size 0xde0000 */
1349 {"log", 0xfc0000, 0x20000},
1350 {"certificate", 0xfe0000, 0x10000},
1351 {"default-config", 0xff0000, 0x10000},
1356 .first_sysupgrade_partition
= "os-image",
1357 .last_sysupgrade_partition
= "file-system",
1360 /** Firmware layout for the C9 */
1366 "{product_name:ArcherC9,"
1367 "product_ver:1.0.0,"
1368 "special_id:00000000}\n",
1373 {"fs-uboot", 0x00000, 0x40000},
1374 {"os-image", 0x40000, 0x200000},
1375 {"file-system", 0x240000, 0xc00000},
1376 {"default-mac", 0xe40000, 0x00200},
1377 {"pin", 0xe40200, 0x00200},
1378 {"product-info", 0xe40400, 0x00200},
1379 {"partition-table", 0xe50000, 0x10000},
1380 {"soft-version", 0xe60000, 0x00200},
1381 {"support-list", 0xe61000, 0x0f000},
1382 {"profile", 0xe70000, 0x10000},
1383 {"default-config", 0xe80000, 0x10000},
1384 {"user-config", 0xe90000, 0x50000},
1385 {"log", 0xee0000, 0x100000},
1386 {"radio_bk", 0xfe0000, 0x10000},
1387 {"radio", 0xff0000, 0x10000},
1391 .first_sysupgrade_partition
= "os-image",
1392 .last_sysupgrade_partition
= "file-system"
1395 /** Firmware layout for the EAP120 */
1398 .vendor
= "EAP120(TP-LINK|UN|N300-2):1.0\r\n",
1401 "EAP120(TP-LINK|UN|N300-2):1.0\r\n",
1406 {"fs-uboot", 0x00000, 0x20000},
1407 {"partition-table", 0x20000, 0x02000},
1408 {"default-mac", 0x30000, 0x00020},
1409 {"support-list", 0x31000, 0x00100},
1410 {"product-info", 0x31100, 0x00100},
1411 {"soft-version", 0x32000, 0x00100},
1412 {"os-image", 0x40000, 0x180000},
1413 {"file-system", 0x1c0000, 0x600000},
1414 {"user-config", 0x7c0000, 0x10000},
1415 {"backup-config", 0x7d0000, 0x10000},
1416 {"log", 0x7e0000, 0x10000},
1417 {"radio", 0x7f0000, 0x10000},
1421 .first_sysupgrade_partition
= "os-image",
1422 .last_sysupgrade_partition
= "file-system"
1425 /** Firmware layout for the EAP225-Outdoor v1 */
1427 .id
= "EAP225-OUTDOOR-V1",
1430 "EAP225-Outdoor(TP-Link|UN|AC1200-D):1.0\r\n",
1431 .part_trail
= PART_TRAIL_NONE
,
1433 .soft_ver_compat_level
= 1,
1436 {"fs-uboot", 0x00000, 0x20000},
1437 {"partition-table", 0x20000, 0x02000},
1438 {"default-mac", 0x30000, 0x01000},
1439 {"support-list", 0x31000, 0x00100},
1440 {"product-info", 0x31100, 0x00400},
1441 {"soft-version", 0x32000, 0x00100},
1442 {"firmware", 0x40000, 0xd80000},
1443 {"user-config", 0xdc0000, 0x30000},
1444 {"mutil-log", 0xf30000, 0x80000},
1445 {"oops", 0xfb0000, 0x40000},
1446 {"radio", 0xff0000, 0x10000},
1450 .first_sysupgrade_partition
= "os-image",
1451 .last_sysupgrade_partition
= "file-system"
1454 /** Firmware layout for the EAP225 v3 */
1459 "EAP225(TP-Link|UN|AC1350-D):3.0\r\n",
1460 .part_trail
= PART_TRAIL_NONE
,
1462 .soft_ver_compat_level
= 1,
1465 {"fs-uboot", 0x00000, 0x20000},
1466 {"partition-table", 0x20000, 0x02000},
1467 {"default-mac", 0x30000, 0x01000},
1468 {"support-list", 0x31000, 0x00100},
1469 {"product-info", 0x31100, 0x00400},
1470 {"soft-version", 0x32000, 0x00100},
1471 {"firmware", 0x40000, 0xd80000},
1472 {"user-config", 0xdc0000, 0x30000},
1473 {"mutil-log", 0xf30000, 0x80000},
1474 {"oops", 0xfb0000, 0x40000},
1475 {"radio", 0xff0000, 0x10000},
1479 .first_sysupgrade_partition
= "os-image",
1480 .last_sysupgrade_partition
= "file-system"
1483 /** Firmware layout for the EAP225-Wall v2 */
1485 .id
= "EAP225-WALL-V2",
1488 "EAP225-Wall(TP-Link|UN|AC1200-D):2.0\r\n",
1489 .part_trail
= PART_TRAIL_NONE
,
1491 .soft_ver_compat_level
= 1,
1494 {"fs-uboot", 0x00000, 0x20000},
1495 {"partition-table", 0x20000, 0x02000},
1496 {"default-mac", 0x30000, 0x01000},
1497 {"support-list", 0x31000, 0x00100},
1498 {"product-info", 0x31100, 0x00400},
1499 {"soft-version", 0x32000, 0x00100},
1500 {"firmware", 0x40000, 0xd80000},
1501 {"user-config", 0xdc0000, 0x30000},
1502 {"mutil-log", 0xf30000, 0x80000},
1503 {"oops", 0xfb0000, 0x40000},
1504 {"radio", 0xff0000, 0x10000},
1508 .first_sysupgrade_partition
= "os-image",
1509 .last_sysupgrade_partition
= "file-system"
1512 /** Firmware layout for the EAP235-Wall v1 */
1514 .id
= "EAP235-WALL-V1",
1517 "EAP235-Wall(TP-Link|UN|AC1200-D):1.0\r\n",
1518 .part_trail
= PART_TRAIL_NONE
,
1520 .soft_ver_compat_level
= 1,
1523 {"fs-uboot", 0x00000, 0x80000},
1524 {"partition-table", 0x80000, 0x02000},
1525 {"default-mac", 0x90000, 0x01000},
1526 {"support-list", 0x91000, 0x00100},
1527 {"product-info", 0x91100, 0x00400},
1528 {"soft-version", 0x92000, 0x00100},
1529 {"firmware", 0xa0000, 0xd20000},
1530 {"user-config", 0xdc0000, 0x30000},
1531 {"mutil-log", 0xf30000, 0x80000},
1532 {"oops", 0xfb0000, 0x40000},
1533 {"radio", 0xff0000, 0x10000},
1537 .first_sysupgrade_partition
= "os-image",
1538 .last_sysupgrade_partition
= "file-system"
1541 /** Firmware layout for the EAP245 v1 */
1546 "EAP245(TP-LINK|UN|AC1750-D):1.0\r\n",
1547 .part_trail
= PART_TRAIL_NONE
,
1551 {"fs-uboot", 0x00000, 0x20000},
1552 {"partition-table", 0x20000, 0x02000},
1553 {"default-mac", 0x30000, 0x01000},
1554 {"support-list", 0x31000, 0x00100},
1555 {"product-info", 0x31100, 0x00400},
1556 {"soft-version", 0x32000, 0x00100},
1557 {"firmware", 0x40000, 0xd80000},
1558 {"user-config", 0xdc0000, 0x30000},
1559 {"radio", 0xff0000, 0x10000},
1563 .first_sysupgrade_partition
= "os-image",
1564 .last_sysupgrade_partition
= "file-system"
1567 /** Firmware layout for the EAP245 v3 */
1572 "EAP245(TP-Link|UN|AC1750-D):3.0\r\n",
1573 .part_trail
= PART_TRAIL_NONE
,
1575 .soft_ver_compat_level
= 1,
1577 /** Firmware partition with dynamic kernel/rootfs split */
1579 {"factroy-boot", 0x00000, 0x40000},
1580 {"fs-uboot", 0x40000, 0x40000},
1581 {"partition-table", 0x80000, 0x10000},
1582 {"default-mac", 0x90000, 0x01000},
1583 {"support-list", 0x91000, 0x00100},
1584 {"product-info", 0x91100, 0x00400},
1585 {"soft-version", 0x92000, 0x00100},
1586 {"radio", 0xa0000, 0x10000},
1587 {"extra-para", 0xb0000, 0x10000},
1588 {"firmware", 0xc0000, 0xe40000},
1589 {"config", 0xf00000, 0x30000},
1590 {"mutil-log", 0xf30000, 0x80000},
1591 {"oops", 0xfb0000, 0x40000},
1595 .first_sysupgrade_partition
= "os-image",
1596 .last_sysupgrade_partition
= "file-system"
1599 /** Firmware layout for the TL-WA850RE v2 */
1601 .id
= "TLWA850REV2",
1605 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:55530000}\n"
1606 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:00000000}\n"
1607 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:55534100}\n"
1608 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:45550000}\n"
1609 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:4B520000}\n"
1610 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:42520000}\n"
1611 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:4A500000}\n"
1612 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:43410000}\n"
1613 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:41550000}\n"
1614 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:52550000}\n",
1619 576KB were moved from file-system to os-image
1620 in comparison to the stock image
1623 {"fs-uboot", 0x00000, 0x20000},
1624 {"firmware", 0x20000, 0x390000},
1625 {"partition-table", 0x3b0000, 0x02000},
1626 {"default-mac", 0x3c0000, 0x00020},
1627 {"pin", 0x3c0100, 0x00020},
1628 {"product-info", 0x3c1000, 0x01000},
1629 {"soft-version", 0x3c2000, 0x00100},
1630 {"support-list", 0x3c3000, 0x01000},
1631 {"profile", 0x3c4000, 0x08000},
1632 {"user-config", 0x3d0000, 0x10000},
1633 {"default-config", 0x3e0000, 0x10000},
1634 {"radio", 0x3f0000, 0x10000},
1638 .first_sysupgrade_partition
= "os-image",
1639 .last_sysupgrade_partition
= "file-system"
1642 /** Firmware layout for the TL-WA855RE v1 */
1644 .id
= "TLWA855REV1",
1648 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:00000000}\n"
1649 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:55530000}\n"
1650 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:45550000}\n"
1651 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:4B520000}\n"
1652 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:42520000}\n"
1653 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:4A500000}\n"
1654 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:43410000}\n"
1655 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:41550000}\n"
1656 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:52550000}\n",
1661 {"fs-uboot", 0x00000, 0x20000},
1662 {"os-image", 0x20000, 0x150000},
1663 {"file-system", 0x170000, 0x240000},
1664 {"partition-table", 0x3b0000, 0x02000},
1665 {"default-mac", 0x3c0000, 0x00020},
1666 {"pin", 0x3c0100, 0x00020},
1667 {"product-info", 0x3c1000, 0x01000},
1668 {"soft-version", 0x3c2000, 0x00100},
1669 {"support-list", 0x3c3000, 0x01000},
1670 {"profile", 0x3c4000, 0x08000},
1671 {"user-config", 0x3d0000, 0x10000},
1672 {"default-config", 0x3e0000, 0x10000},
1673 {"radio", 0x3f0000, 0x10000},
1677 .first_sysupgrade_partition
= "os-image",
1678 .last_sysupgrade_partition
= "file-system"
1681 /** Firmware layout for the TL-WPA8630P v2 (EU)*/
1683 .id
= "TL-WPA8630P-V2.0-EU",
1687 "{product_name:TL-WPA8630P,product_ver:2.0.0,special_id:45550000}\n",
1692 {"factory-uboot", 0x00000, 0x20000},
1693 {"fs-uboot", 0x20000, 0x20000},
1694 {"firmware", 0x40000, 0x5e0000},
1695 {"partition-table", 0x620000, 0x02000},
1696 {"default-mac", 0x630000, 0x00020},
1697 {"pin", 0x630100, 0x00020},
1698 {"device-id", 0x630200, 0x00030},
1699 {"product-info", 0x631100, 0x01000},
1700 {"extra-para", 0x632100, 0x01000},
1701 {"soft-version", 0x640000, 0x01000},
1702 {"support-list", 0x641000, 0x01000},
1703 {"profile", 0x642000, 0x08000},
1704 {"user-config", 0x650000, 0x10000},
1705 {"default-config", 0x660000, 0x10000},
1706 {"default-nvm", 0x670000, 0xc0000},
1707 {"default-pib", 0x730000, 0x40000},
1708 {"radio", 0x7f0000, 0x10000},
1712 .first_sysupgrade_partition
= "os-image",
1713 .last_sysupgrade_partition
= "file-system"
1716 /** Firmware layout for the TL-WPA8630P v2 (INT)*/
1718 .id
= "TL-WPA8630P-V2-INT",
1722 "{product_name:TL-WPA8630P,product_ver:2.0.0,special_id:41550000}\n"
1723 "{product_name:TL-WPA8630P,product_ver:2.0.0,special_id:44450000}\n"
1724 "{product_name:TL-WPA8630P,product_ver:2.1.0,special_id:41550000}\n",
1729 {"factory-uboot", 0x00000, 0x20000},
1730 {"fs-uboot", 0x20000, 0x20000},
1731 {"firmware", 0x40000, 0x5e0000},
1732 {"partition-table", 0x620000, 0x02000},
1733 {"extra-para", 0x632100, 0x01000},
1734 {"soft-version", 0x640000, 0x01000},
1735 {"support-list", 0x641000, 0x01000},
1736 {"profile", 0x642000, 0x08000},
1737 {"user-config", 0x650000, 0x10000},
1738 {"default-config", 0x660000, 0x10000},
1739 {"default-nvm", 0x670000, 0xc0000},
1740 {"default-pib", 0x730000, 0x40000},
1741 {"default-mac", 0x7e0000, 0x00020},
1742 {"pin", 0x7e0100, 0x00020},
1743 {"device-id", 0x7e0200, 0x00030},
1744 {"product-info", 0x7e1100, 0x01000},
1745 {"radio", 0x7f0000, 0x10000},
1749 .first_sysupgrade_partition
= "os-image",
1750 .last_sysupgrade_partition
= "file-system"
1753 /** Firmware layout for the TL-WPA8630P v2.1 (EU)*/
1755 .id
= "TL-WPA8630P-V2.1-EU",
1759 "{product_name:TL-WPA8630P,product_ver:2.1.0,special_id:45550000}\n",
1764 {"factory-uboot", 0x00000, 0x20000},
1765 {"fs-uboot", 0x20000, 0x20000},
1766 {"firmware", 0x40000, 0x5e0000},
1767 {"extra-para", 0x680000, 0x01000},
1768 {"product-info", 0x690000, 0x01000},
1769 {"partition-table", 0x6a0000, 0x02000},
1770 {"soft-version", 0x6b0000, 0x01000},
1771 {"support-list", 0x6b1000, 0x01000},
1772 {"profile", 0x6b2000, 0x08000},
1773 {"user-config", 0x6c0000, 0x10000},
1774 {"default-config", 0x6d0000, 0x10000},
1775 {"default-nvm", 0x6e0000, 0xc0000},
1776 {"default-pib", 0x7a0000, 0x40000},
1777 {"default-mac", 0x7e0000, 0x00020},
1778 {"pin", 0x7e0100, 0x00020},
1779 {"device-id", 0x7e0200, 0x00030},
1780 {"radio", 0x7f0000, 0x10000},
1784 .first_sysupgrade_partition
= "os-image",
1785 .last_sysupgrade_partition
= "file-system"
1788 /** Firmware layout for the TL-WR1043 v5 */
1790 .id
= "TLWR1043NV5",
1794 "{product_name:TL-WR1043N,product_ver:5.0.0,special_id:45550000}\n"
1795 "{product_name:TL-WR1043N,product_ver:5.0.0,special_id:55530000}\n",
1797 .soft_ver
= "soft_ver:1.0.0\n",
1799 {"factory-boot", 0x00000, 0x20000},
1800 {"fs-uboot", 0x20000, 0x20000},
1801 {"firmware", 0x40000, 0xec0000},
1802 {"default-mac", 0xf00000, 0x00200},
1803 {"pin", 0xf00200, 0x00200},
1804 {"device-id", 0xf00400, 0x00100},
1805 {"product-info", 0xf00500, 0x0fb00},
1806 {"soft-version", 0xf10000, 0x01000},
1807 {"extra-para", 0xf11000, 0x01000},
1808 {"support-list", 0xf12000, 0x0a000},
1809 {"profile", 0xf1c000, 0x04000},
1810 {"default-config", 0xf20000, 0x10000},
1811 {"user-config", 0xf30000, 0x40000},
1812 {"qos-db", 0xf70000, 0x40000},
1813 {"certificate", 0xfb0000, 0x10000},
1814 {"partition-table", 0xfc0000, 0x10000},
1815 {"log", 0xfd0000, 0x20000},
1816 {"radio", 0xff0000, 0x10000},
1819 .first_sysupgrade_partition
= "os-image",
1820 .last_sysupgrade_partition
= "file-system"
1823 /** Firmware layout for the TL-WR1043 v4 */
1825 .id
= "TLWR1043NDV4",
1829 "{product_name:TL-WR1043ND,product_ver:4.0.0,special_id:45550000}\n",
1833 /* We're using a dynamic kernel/rootfs split here */
1835 {"fs-uboot", 0x00000, 0x20000},
1836 {"firmware", 0x20000, 0xf30000},
1837 {"default-mac", 0xf50000, 0x00200},
1838 {"pin", 0xf50200, 0x00200},
1839 {"product-info", 0xf50400, 0x0fc00},
1840 {"soft-version", 0xf60000, 0x0b000},
1841 {"support-list", 0xf6b000, 0x04000},
1842 {"profile", 0xf70000, 0x04000},
1843 {"default-config", 0xf74000, 0x0b000},
1844 {"user-config", 0xf80000, 0x40000},
1845 {"partition-table", 0xfc0000, 0x10000},
1846 {"log", 0xfd0000, 0x20000},
1847 {"radio", 0xff0000, 0x10000},
1851 .first_sysupgrade_partition
= "os-image",
1852 .last_sysupgrade_partition
= "file-system"
1855 /** Firmware layout for the TL-WR902AC v1 */
1857 .id
= "TL-WR902AC-V1",
1861 "{product_name:TL-WR902AC,product_ver:1.0.0,special_id:45550000}\n"
1862 "{product_name:TL-WR902AC,product_ver:1.0.0,special_id:55530000}\n",
1867 384KB were moved from file-system to os-image
1868 in comparison to the stock image
1871 {"fs-uboot", 0x00000, 0x20000},
1872 {"firmware", 0x20000, 0x730000},
1873 {"default-mac", 0x750000, 0x00200},
1874 {"pin", 0x750200, 0x00200},
1875 {"product-info", 0x750400, 0x0fc00},
1876 {"soft-version", 0x760000, 0x0b000},
1877 {"support-list", 0x76b000, 0x04000},
1878 {"profile", 0x770000, 0x04000},
1879 {"default-config", 0x774000, 0x0b000},
1880 {"user-config", 0x780000, 0x40000},
1881 {"partition-table", 0x7c0000, 0x10000},
1882 {"log", 0x7d0000, 0x20000},
1883 {"radio", 0x7f0000, 0x10000},
1887 .first_sysupgrade_partition
= "os-image",
1888 .last_sysupgrade_partition
= "file-system",
1891 /** Firmware layout for the TL-WR942N V1 */
1897 "{product_name:TL-WR942N,product_ver:1.0.0,special_id:00000000}\r\n"
1898 "{product_name:TL-WR942N,product_ver:1.0.0,special_id:52550000}\r\n",
1903 {"fs-uboot", 0x00000, 0x20000},
1904 {"firmware", 0x20000, 0xe20000},
1905 {"default-mac", 0xe40000, 0x00200},
1906 {"pin", 0xe40200, 0x00200},
1907 {"product-info", 0xe40400, 0x0fc00},
1908 {"partition-table", 0xe50000, 0x10000},
1909 {"soft-version", 0xe60000, 0x10000},
1910 {"support-list", 0xe70000, 0x10000},
1911 {"profile", 0xe80000, 0x10000},
1912 {"default-config", 0xe90000, 0x10000},
1913 {"user-config", 0xea0000, 0x40000},
1914 {"qos-db", 0xee0000, 0x40000},
1915 {"certificate", 0xf20000, 0x10000},
1916 {"usb-config", 0xfb0000, 0x10000},
1917 {"log", 0xfc0000, 0x20000},
1918 {"radio-bk", 0xfe0000, 0x10000},
1919 {"radio", 0xff0000, 0x10000},
1923 .first_sysupgrade_partition
= "os-image",
1924 .last_sysupgrade_partition
= "file-system",
1927 /** Firmware layout for the RE200 v2 */
1933 "{product_name:RE200,product_ver:2.0.0,special_id:00000000}\n"
1934 "{product_name:RE200,product_ver:2.0.0,special_id:41520000}\n"
1935 "{product_name:RE200,product_ver:2.0.0,special_id:41550000}\n"
1936 "{product_name:RE200,product_ver:2.0.0,special_id:42520000}\n"
1937 "{product_name:RE200,product_ver:2.0.0,special_id:43410000}\n"
1938 "{product_name:RE200,product_ver:2.0.0,special_id:45530000}\n"
1939 "{product_name:RE200,product_ver:2.0.0,special_id:45550000}\n"
1940 "{product_name:RE200,product_ver:2.0.0,special_id:49440000}\n"
1941 "{product_name:RE200,product_ver:2.0.0,special_id:4a500000}\n"
1942 "{product_name:RE200,product_ver:2.0.0,special_id:4b520000}\n"
1943 "{product_name:RE200,product_ver:2.0.0,special_id:52550000}\n"
1944 "{product_name:RE200,product_ver:2.0.0,special_id:54570000}\n"
1945 "{product_name:RE200,product_ver:2.0.0,special_id:55530000}\n",
1950 {"fs-uboot", 0x00000, 0x20000},
1951 {"firmware", 0x20000, 0x7a0000},
1952 {"partition-table", 0x7c0000, 0x02000},
1953 {"default-mac", 0x7c2000, 0x00020},
1954 {"pin", 0x7c2100, 0x00020},
1955 {"product-info", 0x7c3100, 0x01000},
1956 {"soft-version", 0x7c4200, 0x01000},
1957 {"support-list", 0x7c5200, 0x01000},
1958 {"profile", 0x7c6200, 0x08000},
1959 {"config-info", 0x7ce200, 0x00400},
1960 {"user-config", 0x7d0000, 0x10000},
1961 {"default-config", 0x7e0000, 0x10000},
1962 {"radio", 0x7f0000, 0x10000},
1966 .first_sysupgrade_partition
= "os-image",
1967 .last_sysupgrade_partition
= "file-system"
1970 /** Firmware layout for the RE200 v3 */
1976 "{product_name:RE200,product_ver:3.0.0,special_id:00000000}\n"
1977 "{product_name:RE200,product_ver:3.0.0,special_id:41520000}\n"
1978 "{product_name:RE200,product_ver:3.0.0,special_id:41550000}\n"
1979 "{product_name:RE200,product_ver:3.0.0,special_id:42520000}\n"
1980 "{product_name:RE200,product_ver:3.0.0,special_id:43410000}\n"
1981 "{product_name:RE200,product_ver:3.0.0,special_id:45470000}\n"
1982 "{product_name:RE200,product_ver:3.0.0,special_id:45530000}\n"
1983 "{product_name:RE200,product_ver:3.0.0,special_id:45550000}\n"
1984 "{product_name:RE200,product_ver:3.0.0,special_id:49440000}\n"
1985 "{product_name:RE200,product_ver:3.0.0,special_id:4A500000}\n"
1986 "{product_name:RE200,product_ver:3.0.0,special_id:4B520000}\n"
1987 "{product_name:RE200,product_ver:3.0.0,special_id:52550000}\n"
1988 "{product_name:RE200,product_ver:3.0.0,special_id:54570000}\n"
1989 "{product_name:RE200,product_ver:3.0.0,special_id:55530000}\n",
1994 {"fs-uboot", 0x00000, 0x20000},
1995 {"firmware", 0x20000, 0x7a0000},
1996 {"partition-table", 0x7c0000, 0x02000},
1997 {"default-mac", 0x7c2000, 0x00020},
1998 {"pin", 0x7c2100, 0x00020},
1999 {"product-info", 0x7c3100, 0x01000},
2000 {"soft-version", 0x7c4200, 0x01000},
2001 {"support-list", 0x7c5200, 0x01000},
2002 {"profile", 0x7c6200, 0x08000},
2003 {"config-info", 0x7ce200, 0x00400},
2004 {"user-config", 0x7d0000, 0x10000},
2005 {"default-config", 0x7e0000, 0x10000},
2006 {"radio", 0x7f0000, 0x10000},
2010 .first_sysupgrade_partition
= "os-image",
2011 .last_sysupgrade_partition
= "file-system"
2014 /** Firmware layout for the RE200 v4 */
2020 "{product_name:RE200,product_ver:4.0.0,special_id:00000000}\n"
2021 "{product_name:RE200,product_ver:4.0.0,special_id:45550000}\n"
2022 "{product_name:RE200,product_ver:4.0.0,special_id:4A500000}\n"
2023 "{product_name:RE200,product_ver:4.0.0,special_id:4B520000}\n"
2024 "{product_name:RE200,product_ver:4.0.0,special_id:43410000}\n"
2025 "{product_name:RE200,product_ver:4.0.0,special_id:41550000}\n"
2026 "{product_name:RE200,product_ver:4.0.0,special_id:42520000}\n"
2027 "{product_name:RE200,product_ver:4.0.0,special_id:55530000}\n"
2028 "{product_name:RE200,product_ver:4.0.0,special_id:41520000}\n"
2029 "{product_name:RE200,product_ver:4.0.0,special_id:52550000}\n"
2030 "{product_name:RE200,product_ver:4.0.0,special_id:54570000}\n"
2031 "{product_name:RE200,product_ver:4.0.0,special_id:45530000}\n"
2032 "{product_name:RE200,product_ver:4.0.0,special_id:49440000}\n"
2033 "{product_name:RE200,product_ver:4.0.0,special_id:45470000}\n",
2035 .soft_ver
= "soft_ver:1.1.0\n",
2038 {"fs-uboot", 0x00000, 0x20000},
2039 {"firmware", 0x20000, 0x7a0000},
2040 {"partition-table", 0x7c0000, 0x02000},
2041 {"default-mac", 0x7c2000, 0x00020},
2042 {"pin", 0x7c2100, 0x00020},
2043 {"product-info", 0x7c3100, 0x01000},
2044 {"soft-version", 0x7c4200, 0x01000},
2045 {"support-list", 0x7c5200, 0x01000},
2046 {"profile", 0x7c6200, 0x08000},
2047 {"config-info", 0x7ce200, 0x00400},
2048 {"user-config", 0x7d0000, 0x10000},
2049 {"default-config", 0x7e0000, 0x10000},
2050 {"radio", 0x7f0000, 0x10000},
2054 .first_sysupgrade_partition
= "os-image",
2055 .last_sysupgrade_partition
= "file-system"
2058 /** Firmware layout for the RE220 v2 */
2064 "{product_name:RE220,product_ver:2.0.0,special_id:00000000}\n"
2065 "{product_name:RE220,product_ver:2.0.0,special_id:41520000}\n"
2066 "{product_name:RE220,product_ver:2.0.0,special_id:41550000}\n"
2067 "{product_name:RE220,product_ver:2.0.0,special_id:42520000}\n"
2068 "{product_name:RE220,product_ver:2.0.0,special_id:43410000}\n"
2069 "{product_name:RE220,product_ver:2.0.0,special_id:45530000}\n"
2070 "{product_name:RE220,product_ver:2.0.0,special_id:45550000}\n"
2071 "{product_name:RE220,product_ver:2.0.0,special_id:49440000}\n"
2072 "{product_name:RE220,product_ver:2.0.0,special_id:4a500000}\n"
2073 "{product_name:RE220,product_ver:2.0.0,special_id:4b520000}\n"
2074 "{product_name:RE220,product_ver:2.0.0,special_id:52550000}\n"
2075 "{product_name:RE220,product_ver:2.0.0,special_id:54570000}\n"
2076 "{product_name:RE220,product_ver:2.0.0,special_id:55530000}\n",
2081 {"fs-uboot", 0x00000, 0x20000},
2082 {"firmware", 0x20000, 0x7a0000},
2083 {"partition-table", 0x7c0000, 0x02000},
2084 {"default-mac", 0x7c2000, 0x00020},
2085 {"pin", 0x7c2100, 0x00020},
2086 {"product-info", 0x7c3100, 0x01000},
2087 {"soft-version", 0x7c4200, 0x01000},
2088 {"support-list", 0x7c5200, 0x01000},
2089 {"profile", 0x7c6200, 0x08000},
2090 {"config-info", 0x7ce200, 0x00400},
2091 {"user-config", 0x7d0000, 0x10000},
2092 {"default-config", 0x7e0000, 0x10000},
2093 {"radio", 0x7f0000, 0x10000},
2097 .first_sysupgrade_partition
= "os-image",
2098 .last_sysupgrade_partition
= "file-system"
2101 /** Firmware layout for the RE305 v1 */
2107 "{product_name:RE305,product_ver:1.0.0,special_id:45550000}\n"
2108 "{product_name:RE305,product_ver:1.0.0,special_id:55530000}\n"
2109 "{product_name:RE305,product_ver:1.0.0,special_id:4a500000}\n"
2110 "{product_name:RE305,product_ver:1.0.0,special_id:42520000}\n"
2111 "{product_name:RE305,product_ver:1.0.0,special_id:4b520000}\n"
2112 "{product_name:RE305,product_ver:1.0.0,special_id:41550000}\n"
2113 "{product_name:RE305,product_ver:1.0.0,special_id:43410000}\n",
2118 {"fs-uboot", 0x00000, 0x20000},
2119 {"firmware", 0x20000, 0x5e0000},
2120 {"partition-table", 0x600000, 0x02000},
2121 {"default-mac", 0x610000, 0x00020},
2122 {"pin", 0x610100, 0x00020},
2123 {"product-info", 0x611100, 0x01000},
2124 {"soft-version", 0x620000, 0x01000},
2125 {"support-list", 0x621000, 0x01000},
2126 {"profile", 0x622000, 0x08000},
2127 {"user-config", 0x630000, 0x10000},
2128 {"default-config", 0x640000, 0x10000},
2129 {"radio", 0x7f0000, 0x10000},
2133 .first_sysupgrade_partition
= "os-image",
2134 .last_sysupgrade_partition
= "file-system"
2137 /** Firmware layout for the RE350 v1 */
2143 "{product_name:RE350,product_ver:1.0.0,special_id:45550000}\n"
2144 "{product_name:RE350,product_ver:1.0.0,special_id:00000000}\n"
2145 "{product_name:RE350,product_ver:1.0.0,special_id:41550000}\n"
2146 "{product_name:RE350,product_ver:1.0.0,special_id:55530000}\n"
2147 "{product_name:RE350,product_ver:1.0.0,special_id:43410000}\n"
2148 "{product_name:RE350,product_ver:1.0.0,special_id:4b520000}\n"
2149 "{product_name:RE350,product_ver:1.0.0,special_id:4a500000}\n",
2153 /** We're using a dynamic kernel/rootfs split here */
2155 {"fs-uboot", 0x00000, 0x20000},
2156 {"firmware", 0x20000, 0x5e0000},
2157 {"partition-table", 0x600000, 0x02000},
2158 {"default-mac", 0x610000, 0x00020},
2159 {"pin", 0x610100, 0x00020},
2160 {"product-info", 0x611100, 0x01000},
2161 {"soft-version", 0x620000, 0x01000},
2162 {"support-list", 0x621000, 0x01000},
2163 {"profile", 0x622000, 0x08000},
2164 {"user-config", 0x630000, 0x10000},
2165 {"default-config", 0x640000, 0x10000},
2166 {"radio", 0x7f0000, 0x10000},
2170 .first_sysupgrade_partition
= "os-image",
2171 .last_sysupgrade_partition
= "file-system"
2174 /** Firmware layout for the RE350K v1 */
2180 "{product_name:RE350K,product_ver:1.0.0,special_id:00000000,product_region:US}\n",
2184 /** We're using a dynamic kernel/rootfs split here */
2186 {"fs-uboot", 0x00000, 0x20000},
2187 {"firmware", 0x20000, 0xd70000},
2188 {"partition-table", 0xd90000, 0x02000},
2189 {"default-mac", 0xda0000, 0x00020},
2190 {"pin", 0xda0100, 0x00020},
2191 {"product-info", 0xda1100, 0x01000},
2192 {"soft-version", 0xdb0000, 0x01000},
2193 {"support-list", 0xdb1000, 0x01000},
2194 {"profile", 0xdb2000, 0x08000},
2195 {"user-config", 0xdc0000, 0x10000},
2196 {"default-config", 0xdd0000, 0x10000},
2197 {"device-id", 0xde0000, 0x00108},
2198 {"radio", 0xff0000, 0x10000},
2202 .first_sysupgrade_partition
= "os-image",
2203 .last_sysupgrade_partition
= "file-system"
2206 /** Firmware layout for the RE355 */
2212 "{product_name:RE355,product_ver:1.0.0,special_id:00000000}\r\n"
2213 "{product_name:RE355,product_ver:1.0.0,special_id:55530000}\r\n"
2214 "{product_name:RE355,product_ver:1.0.0,special_id:45550000}\r\n"
2215 "{product_name:RE355,product_ver:1.0.0,special_id:4A500000}\r\n"
2216 "{product_name:RE355,product_ver:1.0.0,special_id:43410000}\r\n"
2217 "{product_name:RE355,product_ver:1.0.0,special_id:41550000}\r\n"
2218 "{product_name:RE355,product_ver:1.0.0,special_id:4B520000}\r\n"
2219 "{product_name:RE355,product_ver:1.0.0,special_id:55534100}\r\n",
2223 /* We're using a dynamic kernel/rootfs split here */
2225 {"fs-uboot", 0x00000, 0x20000},
2226 {"firmware", 0x20000, 0x5e0000},
2227 {"partition-table", 0x600000, 0x02000},
2228 {"default-mac", 0x610000, 0x00020},
2229 {"pin", 0x610100, 0x00020},
2230 {"product-info", 0x611100, 0x01000},
2231 {"soft-version", 0x620000, 0x01000},
2232 {"support-list", 0x621000, 0x01000},
2233 {"profile", 0x622000, 0x08000},
2234 {"user-config", 0x630000, 0x10000},
2235 {"default-config", 0x640000, 0x10000},
2236 {"radio", 0x7f0000, 0x10000},
2240 .first_sysupgrade_partition
= "os-image",
2241 .last_sysupgrade_partition
= "file-system"
2244 /** Firmware layout for the RE450 */
2250 "{product_name:RE450,product_ver:1.0.0,special_id:00000000}\r\n"
2251 "{product_name:RE450,product_ver:1.0.0,special_id:55530000}\r\n"
2252 "{product_name:RE450,product_ver:1.0.0,special_id:45550000}\r\n"
2253 "{product_name:RE450,product_ver:1.0.0,special_id:4A500000}\r\n"
2254 "{product_name:RE450,product_ver:1.0.0,special_id:43410000}\r\n"
2255 "{product_name:RE450,product_ver:1.0.0,special_id:41550000}\r\n"
2256 "{product_name:RE450,product_ver:1.0.0,special_id:4B520000}\r\n"
2257 "{product_name:RE450,product_ver:1.0.0,special_id:55534100}\r\n",
2261 /** We're using a dynamic kernel/rootfs split here */
2263 {"fs-uboot", 0x00000, 0x20000},
2264 {"firmware", 0x20000, 0x5e0000},
2265 {"partition-table", 0x600000, 0x02000},
2266 {"default-mac", 0x610000, 0x00020},
2267 {"pin", 0x610100, 0x00020},
2268 {"product-info", 0x611100, 0x01000},
2269 {"soft-version", 0x620000, 0x01000},
2270 {"support-list", 0x621000, 0x01000},
2271 {"profile", 0x622000, 0x08000},
2272 {"user-config", 0x630000, 0x10000},
2273 {"default-config", 0x640000, 0x10000},
2274 {"radio", 0x7f0000, 0x10000},
2278 .first_sysupgrade_partition
= "os-image",
2279 .last_sysupgrade_partition
= "file-system"
2282 /** Firmware layout for the RE450 v2 */
2288 "{product_name:RE450,product_ver:2.0.0,special_id:00000000}\r\n"
2289 "{product_name:RE450,product_ver:2.0.0,special_id:55530000}\r\n"
2290 "{product_name:RE450,product_ver:2.0.0,special_id:45550000}\r\n"
2291 "{product_name:RE450,product_ver:2.0.0,special_id:4A500000}\r\n"
2292 "{product_name:RE450,product_ver:2.0.0,special_id:43410000}\r\n"
2293 "{product_name:RE450,product_ver:2.0.0,special_id:41550000}\r\n"
2294 "{product_name:RE450,product_ver:2.0.0,special_id:41530000}\r\n"
2295 "{product_name:RE450,product_ver:2.0.0,special_id:4B520000}\r\n"
2296 "{product_name:RE450,product_ver:2.0.0,special_id:42520000}\r\n",
2300 /* We're using a dynamic kernel/rootfs split here */
2302 {"fs-uboot", 0x00000, 0x20000},
2303 {"firmware", 0x20000, 0x5e0000},
2304 {"partition-table", 0x600000, 0x02000},
2305 {"default-mac", 0x610000, 0x00020},
2306 {"pin", 0x610100, 0x00020},
2307 {"product-info", 0x611100, 0x01000},
2308 {"soft-version", 0x620000, 0x01000},
2309 {"support-list", 0x621000, 0x01000},
2310 {"profile", 0x622000, 0x08000},
2311 {"user-config", 0x630000, 0x10000},
2312 {"default-config", 0x640000, 0x10000},
2313 {"radio", 0x7f0000, 0x10000},
2317 .first_sysupgrade_partition
= "os-image",
2318 .last_sysupgrade_partition
= "file-system"
2321 /** Firmware layout for the RE450 v3 */
2327 "{product_name:RE450,product_ver:3.0.0,special_id:00000000}\r\n"
2328 "{product_name:RE450,product_ver:3.0.0,special_id:55530000}\r\n"
2329 "{product_name:RE450,product_ver:3.0.0,special_id:45550000}\r\n"
2330 "{product_name:RE450,product_ver:3.0.0,special_id:4A500000}\r\n"
2331 "{product_name:RE450,product_ver:3.0.0,special_id:43410000}\r\n"
2332 "{product_name:RE450,product_ver:3.0.0,special_id:41550000}\r\n"
2333 "{product_name:RE450,product_ver:3.0.0,special_id:41530000}\r\n"
2334 "{product_name:RE450,product_ver:3.0.0,special_id:4B520000}\r\n"
2335 "{product_name:RE450,product_ver:3.0.0,special_id:42520000}\r\n",
2339 /* We're using a dynamic kernel/rootfs split here */
2341 {"fs-uboot", 0x00000, 0x20000},
2342 {"default-mac", 0x20000, 0x00020},
2343 {"pin", 0x20020, 0x00020},
2344 {"product-info", 0x21000, 0x01000},
2345 {"partition-table", 0x22000, 0x02000},
2346 {"soft-version", 0x24000, 0x01000},
2347 {"support-list", 0x25000, 0x01000},
2348 {"profile", 0x26000, 0x08000},
2349 {"user-config", 0x2e000, 0x10000},
2350 {"default-config", 0x3e000, 0x10000},
2351 {"config-info", 0x4e000, 0x00400},
2352 {"firmware", 0x50000, 0x7a0000},
2353 {"radio", 0x7f0000, 0x10000},
2357 .first_sysupgrade_partition
= "os-image",
2358 .last_sysupgrade_partition
= "file-system"
2361 /** Firmware layout for the RE500 */
2367 "{product_name:RE500,product_ver:1.0.0,special_id:00000000}\r\n"
2368 "{product_name:RE500,product_ver:1.0.0,special_id:55530000}\r\n"
2369 "{product_name:RE500,product_ver:1.0.0,special_id:45550000}\r\n"
2370 "{product_name:RE500,product_ver:1.0.0,special_id:4A500000}\r\n"
2371 "{product_name:RE500,product_ver:1.0.0,special_id:43410000}\r\n"
2372 "{product_name:RE500,product_ver:1.0.0,special_id:41550000}\r\n"
2373 "{product_name:RE500,product_ver:1.0.0,special_id:41530000}\r\n",
2377 /* We're using a dynamic kernel/rootfs split here */
2379 {"fs-uboot", 0x00000, 0x20000},
2380 {"firmware", 0x20000, 0xde0000},
2381 {"partition-table", 0xe00000, 0x02000},
2382 {"default-mac", 0xe10000, 0x00020},
2383 {"pin", 0xe10100, 0x00020},
2384 {"product-info", 0xe11100, 0x01000},
2385 {"soft-version", 0xe20000, 0x01000},
2386 {"support-list", 0xe21000, 0x01000},
2387 {"profile", 0xe22000, 0x08000},
2388 {"user-config", 0xe30000, 0x10000},
2389 {"default-config", 0xe40000, 0x10000},
2390 {"radio", 0xff0000, 0x10000},
2394 .first_sysupgrade_partition
= "os-image",
2395 .last_sysupgrade_partition
= "file-system"
2398 /** Firmware layout for the RE650 */
2404 "{product_name:RE650,product_ver:1.0.0,special_id:00000000}\r\n"
2405 "{product_name:RE650,product_ver:1.0.0,special_id:55530000}\r\n"
2406 "{product_name:RE650,product_ver:1.0.0,special_id:45550000}\r\n"
2407 "{product_name:RE650,product_ver:1.0.0,special_id:4A500000}\r\n"
2408 "{product_name:RE650,product_ver:1.0.0,special_id:43410000}\r\n"
2409 "{product_name:RE650,product_ver:1.0.0,special_id:41550000}\r\n"
2410 "{product_name:RE650,product_ver:1.0.0,special_id:41530000}\r\n",
2414 /* We're using a dynamic kernel/rootfs split here */
2416 {"fs-uboot", 0x00000, 0x20000},
2417 {"firmware", 0x20000, 0xde0000},
2418 {"partition-table", 0xe00000, 0x02000},
2419 {"default-mac", 0xe10000, 0x00020},
2420 {"pin", 0xe10100, 0x00020},
2421 {"product-info", 0xe11100, 0x01000},
2422 {"soft-version", 0xe20000, 0x01000},
2423 {"support-list", 0xe21000, 0x01000},
2424 {"profile", 0xe22000, 0x08000},
2425 {"user-config", 0xe30000, 0x10000},
2426 {"default-config", 0xe40000, 0x10000},
2427 {"radio", 0xff0000, 0x10000},
2431 .first_sysupgrade_partition
= "os-image",
2432 .last_sysupgrade_partition
= "file-system"
2438 #define error(_ret, _errno, _str, ...) \
2440 fprintf(stderr, _str ": %s\n", ## __VA_ARGS__, \
2441 strerror(_errno)); \
2447 /** Stores a uint32 as big endian */
2448 static inline void put32(uint8_t *buf
, uint32_t val
) {
2455 static inline bool meta_partition_should_pad(enum partition_trail_value pv
)
2457 return (pv
>= 0) && (pv
<= PART_TRAIL_MAX
);
2460 /** Allocate a padded meta partition with a correctly initialised header
2461 * If the `data` pointer is NULL, then the required space is only allocated,
2462 * otherwise `data_len` bytes will be copied from `data` into the partition
2464 static struct image_partition_entry
init_meta_partition_entry(
2465 const char *name
, const void *data
, uint32_t data_len
,
2466 enum partition_trail_value pad_value
)
2468 uint32_t total_len
= sizeof(struct meta_header
) + data_len
;
2469 if (meta_partition_should_pad(pad_value
))
2472 struct image_partition_entry entry
= {
2475 .data
= malloc(total_len
)
2478 error(1, errno
, "failed to allocate meta partition entry");
2480 struct meta_header
*header
= (struct meta_header
*)entry
.data
;
2481 header
->length
= htonl(data_len
);
2485 memcpy(entry
.data
+sizeof(*header
), data
, data_len
);
2487 if (meta_partition_should_pad(pad_value
))
2488 entry
.data
[total_len
- 1] = (uint8_t) pad_value
;
2493 /** Allocates a new image partition */
2494 static struct image_partition_entry
alloc_image_partition(const char *name
, size_t len
) {
2495 struct image_partition_entry entry
= {name
, len
, malloc(len
)};
2497 error(1, errno
, "malloc");
2502 /** Frees an image partition */
2503 static void free_image_partition(struct image_partition_entry entry
) {
2507 static time_t source_date_epoch
= -1;
2508 static void set_source_date_epoch() {
2509 char *env
= getenv("SOURCE_DATE_EPOCH");
2513 source_date_epoch
= strtoull(env
, &endptr
, 10);
2514 if (errno
|| (endptr
&& *endptr
!= '\0')) {
2515 fprintf(stderr
, "Invalid SOURCE_DATE_EPOCH");
2521 /** Generates the partition-table partition */
2522 static struct image_partition_entry
make_partition_table(const struct flash_partition_entry
*p
) {
2523 struct image_partition_entry entry
= alloc_image_partition("partition-table", 0x800);
2525 char *s
= (char *)entry
.data
, *end
= (char *)(s
+entry
.size
);
2533 for (i
= 0; p
[i
].name
; i
++) {
2535 size_t w
= snprintf(s
, len
, "partition %s base 0x%05x size 0x%05x\n", p
[i
].name
, p
[i
].base
, p
[i
].size
);
2538 error(1, 0, "flash partition table overflow?");
2545 memset(s
, 0xff, end
-s
);
2551 /** Generates a binary-coded decimal representation of an integer in the range [0, 99] */
2552 static inline uint8_t bcd(uint8_t v
) {
2553 return 0x10 * (v
/10) + v
%10;
2557 /** Generates the soft-version partition */
2558 static struct image_partition_entry
make_soft_version(
2559 const struct device_info
*info
, uint32_t rev
)
2561 /** If an info string is provided, use this instead of
2562 * the structured data, and include the null-termination */
2563 if (info
->soft_ver
) {
2564 uint32_t len
= strlen(info
->soft_ver
) + 1;
2565 return init_meta_partition_entry("soft-version",
2566 info
->soft_ver
, len
, info
->part_trail
);
2571 if (source_date_epoch
!= -1)
2572 t
= source_date_epoch
;
2573 else if (time(&t
) == (time_t)(-1))
2574 error(1, errno
, "time");
2576 struct tm
*tm
= gmtime(&t
);
2578 struct soft_version s
= {
2585 .year_hi
= bcd((1900+tm
->tm_year
)/100),
2586 .year_lo
= bcd(tm
->tm_year
%100),
2587 .month
= bcd(tm
->tm_mon
+1),
2588 .day
= bcd(tm
->tm_mday
),
2590 .compat_level
= htonl(info
->soft_ver_compat_level
)
2593 if (info
->soft_ver_compat_level
== 0)
2594 return init_meta_partition_entry("soft-version", &s
,
2595 (uint8_t *)(&s
.compat_level
) - (uint8_t *)(&s
),
2598 return init_meta_partition_entry("soft-version", &s
,
2599 sizeof(s
), info
->part_trail
);
2602 /** Generates the support-list partition */
2603 static struct image_partition_entry
make_support_list(
2604 const struct device_info
*info
)
2606 uint32_t len
= strlen(info
->support_list
);
2607 return init_meta_partition_entry("support-list", info
->support_list
,
2608 len
, info
->part_trail
);
2611 /** Partition with extra-para data */
2612 static struct image_partition_entry
make_extra_para(
2613 const struct device_info
*info
, const uint8_t *extra_para
, size_t len
)
2615 return init_meta_partition_entry("extra-para", extra_para
, len
,
2619 /** Creates a new image partition with an arbitrary name from a file */
2620 static struct image_partition_entry
read_file(const char *part_name
, const char *filename
, bool add_jffs2_eof
, struct flash_partition_entry
*file_system_partition
) {
2621 struct stat statbuf
;
2623 if (stat(filename
, &statbuf
) < 0)
2624 error(1, errno
, "unable to stat file `%s'", filename
);
2626 size_t len
= statbuf
.st_size
;
2628 if (add_jffs2_eof
) {
2629 if (file_system_partition
)
2630 len
= ALIGN(len
+ file_system_partition
->base
, 0x10000) + sizeof(jffs2_eof_mark
) - file_system_partition
->base
;
2632 len
= ALIGN(len
, 0x10000) + sizeof(jffs2_eof_mark
);
2635 struct image_partition_entry entry
= alloc_image_partition(part_name
, len
);
2637 FILE *file
= fopen(filename
, "rb");
2639 error(1, errno
, "unable to open file `%s'", filename
);
2641 if (fread(entry
.data
, statbuf
.st_size
, 1, file
) != 1)
2642 error(1, errno
, "unable to read file `%s'", filename
);
2644 if (add_jffs2_eof
) {
2645 uint8_t *eof
= entry
.data
+ statbuf
.st_size
, *end
= entry
.data
+entry
.size
;
2647 memset(eof
, 0xff, end
- eof
- sizeof(jffs2_eof_mark
));
2648 memcpy(end
- sizeof(jffs2_eof_mark
), jffs2_eof_mark
, sizeof(jffs2_eof_mark
));
2657 Copies a list of image partitions into an image buffer and generates the image partition table while doing so
2659 Example image partition table:
2661 fwup-ptn partition-table base 0x00800 size 0x00800
2662 fwup-ptn os-image base 0x01000 size 0x113b45
2663 fwup-ptn file-system base 0x114b45 size 0x1d0004
2664 fwup-ptn support-list base 0x2e4b49 size 0x000d1
2666 Each line of the partition table is terminated with the bytes 09 0d 0a ("\t\r\n"),
2667 the end of the partition table is marked with a zero byte.
2669 The firmware image must contain at least the partition-table and support-list partitions
2670 to be accepted. There aren't any alignment constraints for the image partitions.
2672 The partition-table partition contains the actual flash layout; partitions
2673 from the image partition table are mapped to the corresponding flash partitions during
2674 the firmware upgrade. The support-list partition contains a list of devices supported by
2677 The base offsets in the firmware partition table are relative to the end
2678 of the vendor information block, so the partition-table partition will
2679 actually start at offset 0x1814 of the image.
2681 I think partition-table must be the first partition in the firmware image.
2683 static void put_partitions(uint8_t *buffer
, const struct flash_partition_entry
*flash_parts
, const struct image_partition_entry
*parts
) {
2685 char *image_pt
= (char *)buffer
, *end
= image_pt
+ 0x800;
2687 size_t base
= 0x800;
2688 for (i
= 0; parts
[i
].name
; i
++) {
2689 for (j
= 0; flash_parts
[j
].name
; j
++) {
2690 if (!strcmp(flash_parts
[j
].name
, parts
[i
].name
)) {
2691 if (parts
[i
].size
> flash_parts
[j
].size
)
2692 error(1, 0, "%s partition too big (more than %u bytes)", flash_parts
[j
].name
, (unsigned)flash_parts
[j
].size
);
2697 assert(flash_parts
[j
].name
);
2699 memcpy(buffer
+ base
, parts
[i
].data
, parts
[i
].size
);
2701 size_t len
= end
-image_pt
;
2702 size_t w
= snprintf(image_pt
, len
, "fwup-ptn %s base 0x%05x size 0x%05x\t\r\n", parts
[i
].name
, (unsigned)base
, (unsigned)parts
[i
].size
);
2705 error(1, 0, "image partition table overflow?");
2709 base
+= parts
[i
].size
;
2713 /** Generates and writes the image MD5 checksum */
2714 static void put_md5(uint8_t *md5
, uint8_t *buffer
, unsigned int len
) {
2718 MD5_Update(&ctx
, md5_salt
, (unsigned int)sizeof(md5_salt
));
2719 MD5_Update(&ctx
, buffer
, len
);
2720 MD5_Final(md5
, &ctx
);
2725 Generates the firmware image in factory format
2731 0000-0003 Image size (4 bytes, big endian)
2732 0004-0013 MD5 hash (hash of a 16 byte salt and the image data starting with byte 0x14)
2733 0014-0017 Vendor information length (without padding) (4 bytes, big endian)
2734 0018-1013 Vendor information (4092 bytes, padded with 0xff; there seem to be older
2735 (VxWorks-based) TP-LINK devices which use a smaller vendor information block)
2736 1014-1813 Image partition table (2048 bytes, padded with 0xff)
2737 1814-xxxx Firmware partitions
2739 static void * generate_factory_image(struct device_info
*info
, const struct image_partition_entry
*parts
, size_t *len
) {
2743 for (i
= 0; parts
[i
].name
; i
++)
2744 *len
+= parts
[i
].size
;
2746 uint8_t *image
= malloc(*len
);
2748 error(1, errno
, "malloc");
2750 memset(image
, 0xff, *len
);
2754 size_t vendor_len
= strlen(info
->vendor
);
2755 put32(image
+0x14, vendor_len
);
2756 memcpy(image
+0x18, info
->vendor
, vendor_len
);
2759 put_partitions(image
+ 0x1014, info
->partitions
, parts
);
2760 put_md5(image
+0x04, image
+0x14, *len
-0x14);
2766 Generates the firmware image in sysupgrade format
2768 This makes some assumptions about the provided flash and image partition tables and
2769 should be generalized when TP-LINK starts building its safeloader into hardware with
2770 different flash layouts.
2772 static void * generate_sysupgrade_image(struct device_info
*info
, const struct image_partition_entry
*image_parts
, size_t *len
) {
2774 size_t flash_first_partition_index
= 0;
2775 size_t flash_last_partition_index
= 0;
2776 const struct flash_partition_entry
*flash_first_partition
= NULL
;
2777 const struct flash_partition_entry
*flash_last_partition
= NULL
;
2778 const struct image_partition_entry
*image_last_partition
= NULL
;
2780 /** Find first and last partitions */
2781 for (i
= 0; info
->partitions
[i
].name
; i
++) {
2782 if (!strcmp(info
->partitions
[i
].name
, info
->first_sysupgrade_partition
)) {
2783 flash_first_partition
= &info
->partitions
[i
];
2784 flash_first_partition_index
= i
;
2785 } else if (!strcmp(info
->partitions
[i
].name
, info
->last_sysupgrade_partition
)) {
2786 flash_last_partition
= &info
->partitions
[i
];
2787 flash_last_partition_index
= i
;
2791 assert(flash_first_partition
&& flash_last_partition
);
2792 assert(flash_first_partition_index
< flash_last_partition_index
);
2794 /** Find last partition from image to calculate needed size */
2795 for (i
= 0; image_parts
[i
].name
; i
++) {
2796 if (!strcmp(image_parts
[i
].name
, info
->last_sysupgrade_partition
)) {
2797 image_last_partition
= &image_parts
[i
];
2802 assert(image_last_partition
);
2804 *len
= flash_last_partition
->base
- flash_first_partition
->base
+ image_last_partition
->size
;
2806 uint8_t *image
= malloc(*len
);
2808 error(1, errno
, "malloc");
2810 memset(image
, 0xff, *len
);
2812 for (i
= flash_first_partition_index
; i
<= flash_last_partition_index
; i
++) {
2813 for (j
= 0; image_parts
[j
].name
; j
++) {
2814 if (!strcmp(info
->partitions
[i
].name
, image_parts
[j
].name
)) {
2815 if (image_parts
[j
].size
> info
->partitions
[i
].size
)
2816 error(1, 0, "%s partition too big (more than %u bytes)", info
->partitions
[i
].name
, (unsigned)info
->partitions
[i
].size
);
2817 memcpy(image
+ info
->partitions
[i
].base
- flash_first_partition
->base
, image_parts
[j
].data
, image_parts
[j
].size
);
2821 assert(image_parts
[j
].name
);
2828 /** Generates an image according to a given layout and writes it to a file */
2829 static void build_image(const char *output
,
2830 const char *kernel_image
,
2831 const char *rootfs_image
,
2835 struct device_info
*info
) {
2839 struct image_partition_entry parts
[7] = {};
2841 struct flash_partition_entry
*firmware_partition
= NULL
;
2842 struct flash_partition_entry
*os_image_partition
= NULL
;
2843 struct flash_partition_entry
*file_system_partition
= NULL
;
2844 size_t firmware_partition_index
= 0;
2846 for (i
= 0; info
->partitions
[i
].name
; i
++) {
2847 if (!strcmp(info
->partitions
[i
].name
, "firmware"))
2849 firmware_partition
= &info
->partitions
[i
];
2850 firmware_partition_index
= i
;
2854 if (firmware_partition
)
2856 os_image_partition
= &info
->partitions
[firmware_partition_index
];
2857 file_system_partition
= &info
->partitions
[firmware_partition_index
+ 1];
2860 if (stat(kernel_image
, &kernel
) < 0)
2861 error(1, errno
, "unable to stat file `%s'", kernel_image
);
2863 if (kernel
.st_size
> firmware_partition
->size
)
2864 error(1, 0, "kernel overflowed firmware partition\n");
2866 for (i
= MAX_PARTITIONS
-1; i
>= firmware_partition_index
+ 1; i
--)
2867 info
->partitions
[i
+1] = info
->partitions
[i
];
2869 file_system_partition
->name
= "file-system";
2870 file_system_partition
->base
= firmware_partition
->base
+ kernel
.st_size
;
2872 /* Align partition start to erase blocks for factory images only */
2874 file_system_partition
->base
= ALIGN(firmware_partition
->base
+ kernel
.st_size
, 0x10000);
2876 file_system_partition
->size
= firmware_partition
->size
- file_system_partition
->base
;
2878 os_image_partition
->name
= "os-image";
2879 os_image_partition
->size
= kernel
.st_size
;
2882 parts
[0] = make_partition_table(info
->partitions
);
2883 parts
[1] = make_soft_version(info
, rev
);
2884 parts
[2] = make_support_list(info
);
2885 parts
[3] = read_file("os-image", kernel_image
, false, NULL
);
2886 parts
[4] = read_file("file-system", rootfs_image
, add_jffs2_eof
, file_system_partition
);
2888 /* Some devices need the extra-para partition to accept the firmware */
2889 if (strcasecmp(info
->id
, "ARCHER-A6-V3") == 0 ||
2890 strcasecmp(info
->id
, "ARCHER-A7-V5") == 0 ||
2891 strcasecmp(info
->id
, "ARCHER-C2-V3") == 0 ||
2892 strcasecmp(info
->id
, "ARCHER-C7-V4") == 0 ||
2893 strcasecmp(info
->id
, "ARCHER-C7-V5") == 0 ||
2894 strcasecmp(info
->id
, "ARCHER-C25-V1") == 0 ||
2895 strcasecmp(info
->id
, "ARCHER-C59-V2") == 0 ||
2896 strcasecmp(info
->id
, "ARCHER-C60-V2") == 0 ||
2897 strcasecmp(info
->id
, "ARCHER-C60-V3") == 0 ||
2898 strcasecmp(info
->id
, "ARCHER-C6U-V1") == 0 ||
2899 strcasecmp(info
->id
, "TLWR1043NV5") == 0) {
2900 const uint8_t extra_para
[2] = {0x01, 0x00};
2901 parts
[5] = make_extra_para(info
, extra_para
,
2902 sizeof(extra_para
));
2903 } else if (strcasecmp(info
->id
, "ARCHER-C6-V2") == 0) {
2904 const uint8_t extra_para
[2] = {0x00, 0x01};
2905 parts
[5] = make_extra_para(info
, extra_para
,
2906 sizeof(extra_para
));
2907 } else if (strcasecmp(info
->id
, "ARCHER-C6-V2-US") == 0 ||
2908 strcasecmp(info
->id
, "EAP245-V3") == 0) {
2909 const uint8_t extra_para
[2] = {0x01, 0x01};
2910 parts
[5] = make_extra_para(info
, extra_para
,
2911 sizeof(extra_para
));
2917 image
= generate_sysupgrade_image(info
, parts
, &len
);
2919 image
= generate_factory_image(info
, parts
, &len
);
2921 FILE *file
= fopen(output
, "wb");
2923 error(1, errno
, "unable to open output file");
2925 if (fwrite(image
, len
, 1, file
) != 1)
2926 error(1, 0, "unable to write output file");
2932 for (i
= 0; parts
[i
].name
; i
++)
2933 free_image_partition(parts
[i
]);
2937 static void usage(const char *argv0
) {
2939 "Usage: %s [OPTIONS...]\n"
2942 " -h show this help\n"
2944 "Info about an image:\n"
2945 " -i <file> input file to read from\n"
2946 "Create a new image:\n"
2947 " -B <board> create image for the board specified with <board>\n"
2948 " -k <file> read kernel image from the file <file>\n"
2949 " -r <file> read rootfs image from the file <file>\n"
2950 " -o <file> write output to the file <file>\n"
2951 " -V <rev> sets the revision number to <rev>\n"
2952 " -j add jffs2 end-of-filesystem markers\n"
2953 " -S create sysupgrade instead of factory image\n"
2954 "Extract an old image:\n"
2955 " -x <file> extract all oem firmware partition\n"
2956 " -d <dir> destination to extract the firmware partition\n"
2957 " -z <file> convert an oem firmware into a sysupgade file. Use -o for output file\n",
2963 static struct device_info
*find_board(const char *id
)
2965 struct device_info
*board
= NULL
;
2967 for (board
= boards
; board
->id
!= NULL
; board
++)
2968 if (strcasecmp(id
, board
->id
) == 0)
2974 static int add_flash_partition(
2975 struct flash_partition_entry
*part_list
,
2982 /* check if the list has a free entry */
2983 for (ptr
= 0; ptr
< max_entries
; ptr
++, part_list
++) {
2984 if (part_list
->name
== NULL
&&
2985 part_list
->base
== 0 &&
2986 part_list
->size
== 0)
2990 if (ptr
== max_entries
) {
2991 error(1, 0, "No free flash part entry available.");
2994 part_list
->name
= calloc(1, strlen(name
) + 1);
2995 if (!part_list
->name
) {
2996 error(1, 0, "Unable to allocate memory");
2999 memcpy((char *)part_list
->name
, name
, strlen(name
));
3000 part_list
->base
= base
;
3001 part_list
->size
= size
;
3006 /** read the partition table into struct flash_partition_entry */
3007 static int read_partition_table(
3008 FILE *file
, long offset
,
3009 struct flash_partition_entry
*entries
, size_t max_entries
,
3014 const char *parthdr
= NULL
;
3015 const char *fwuphdr
= "fwup-ptn";
3016 const char *flashhdr
= "partition";
3018 /* TODO: search for the partition table */
3028 error(1, 0, "Invalid partition table");
3031 if (fseek(file
, offset
, SEEK_SET
) < 0)
3032 error(1, errno
, "Can not seek in the firmware");
3034 if (fread(buf
, 2048, 1, file
) != 1)
3035 error(1, errno
, "Can not read fwup-ptn from the firmware");
3039 /* look for the partition header */
3040 if (memcmp(buf
, parthdr
, strlen(parthdr
)) != 0) {
3041 fprintf(stderr
, "DEBUG: can not find fwuphdr\n");
3046 end
= buf
+ sizeof(buf
);
3047 while ((ptr
+ strlen(parthdr
)) < end
&&
3048 memcmp(ptr
, parthdr
, strlen(parthdr
)) == 0) {
3052 char name
[32] = { 0 };
3054 unsigned long base
= 0;
3055 unsigned long size
= 0;
3057 end_part
= memchr(ptr
, '\n', (end
- ptr
));
3058 if (end_part
== NULL
) {
3059 /* in theory this should never happen, because a partition always ends with 0x09, 0x0D, 0x0A */
3063 for (int i
= 0; i
<= 4; i
++) {
3064 if (end_part
<= ptr
)
3067 end_element
= memchr(ptr
, 0x20, (end_part
- ptr
));
3068 if (end_element
== NULL
) {
3069 error(1, errno
, "Ignoring the rest of the partition entries.");
3074 /* partition header */
3076 ptr
= end_element
+ 1;
3080 name_len
= (end_element
- ptr
) > 31 ? 31 : (end_element
- ptr
);
3081 strncpy(name
, ptr
, name_len
);
3082 name
[name_len
] = '\0';
3083 ptr
= end_element
+ 1;
3088 ptr
= end_element
+ 1;
3093 base
= strtoul(ptr
, NULL
, 16);
3094 ptr
= end_element
+ 1;
3099 ptr
= end_element
+ 1;
3100 /* actual size. The last element doesn't have a sepeartor */
3101 size
= strtoul(ptr
, NULL
, 16);
3102 /* the part ends with 0x09, 0x0d, 0x0a */
3104 add_flash_partition(entries
, max_entries
, name
, base
, size
);
3113 static void write_partition(
3115 size_t firmware_offset
,
3116 struct flash_partition_entry
*entry
,
3122 fseek(input_file
, entry
->base
+ firmware_offset
, SEEK_SET
);
3124 for (offset
= 0; sizeof(buf
) + offset
<= entry
->size
; offset
+= sizeof(buf
)) {
3125 if (fread(buf
, sizeof(buf
), 1, input_file
) != 1)
3126 error(1, errno
, "Can not read partition from input_file");
3128 if (fwrite(buf
, sizeof(buf
), 1, output_file
) != 1)
3129 error(1, errno
, "Can not write partition to output_file");
3131 /* write last chunk smaller than buffer */
3132 if (offset
< entry
->size
) {
3133 offset
= entry
->size
- offset
;
3134 if (fread(buf
, offset
, 1, input_file
) != 1)
3135 error(1, errno
, "Can not read partition from input_file");
3136 if (fwrite(buf
, offset
, 1, output_file
) != 1)
3137 error(1, errno
, "Can not write partition to output_file");
3141 static int extract_firmware_partition(FILE *input_file
, size_t firmware_offset
, struct flash_partition_entry
*entry
, const char *output_directory
)
3144 char output
[PATH_MAX
];
3146 snprintf(output
, PATH_MAX
, "%s/%s", output_directory
, entry
->name
);
3147 output_file
= fopen(output
, "wb+");
3148 if (output_file
== NULL
) {
3149 error(1, errno
, "Can not open output file %s", output
);
3152 write_partition(input_file
, firmware_offset
, entry
, output_file
);
3154 fclose(output_file
);
3159 /** extract all partitions from the firmware file */
3160 static int extract_firmware(const char *input
, const char *output_directory
)
3162 struct flash_partition_entry entries
[16] = { 0 };
3163 size_t max_entries
= 16;
3164 size_t firmware_offset
= 0x1014;
3167 struct stat statbuf
;
3169 /* check input file */
3170 if (stat(input
, &statbuf
)) {
3171 error(1, errno
, "Can not read input firmware %s", input
);
3174 /* check if output directory exists */
3175 if (stat(output_directory
, &statbuf
)) {
3176 error(1, errno
, "Failed to stat output directory %s", output_directory
);
3179 if ((statbuf
.st_mode
& S_IFMT
) != S_IFDIR
) {
3180 error(1, errno
, "Given output directory is not a directory %s", output_directory
);
3183 input_file
= fopen(input
, "rb");
3185 if (read_partition_table(input_file
, firmware_offset
, entries
, 16, 0) != 0) {
3186 error(1, 0, "Error can not read the partition table (fwup-ptn)");
3189 for (size_t i
= 0; i
< max_entries
; i
++) {
3190 if (entries
[i
].name
== NULL
&&
3191 entries
[i
].base
== 0 &&
3192 entries
[i
].size
== 0)
3195 extract_firmware_partition(input_file
, firmware_offset
, &entries
[i
], output_directory
);
3201 static struct flash_partition_entry
*find_partition(
3202 struct flash_partition_entry
*entries
, size_t max_entries
,
3203 const char *name
, const char *error_msg
)
3205 for (size_t i
= 0; i
< max_entries
; i
++, entries
++) {
3206 if (strcmp(entries
->name
, name
) == 0)
3211 error(1, 0, "%s", error_msg
);
3217 static int firmware_info(const char *input
)
3219 struct flash_partition_entry pointers
[MAX_PARTITIONS
] = { };
3220 struct flash_partition_entry
*e
;
3224 fp
= fopen(input
, "r");
3226 if (read_partition_table(fp
, 0x1014, pointers
, MAX_PARTITIONS
, 0)) {
3227 error(1, 0, "Error can not read the partition table (fwup-ptn)");
3230 printf("Firmware image partitions:\n");
3231 printf("%-8s %-8s %s\n", "base", "size", "name");
3232 for (i
= 0; i
< MAX_PARTITIONS
; i
++) {
3235 if (!e
->name
&& !e
->base
&& !e
->size
)
3238 printf("%08x %08x %s\n", e
->base
, e
->size
, e
->name
? e
->name
: "");
3241 e
= find_partition(pointers
, MAX_PARTITIONS
, "soft-version", NULL
);
3243 size_t data_len
= e
->size
- sizeof(struct meta_header
);
3244 char *buf
= malloc(data_len
);
3245 struct soft_version
*s
;
3250 error(1, errno
, "Failed to alloc buffer");
3252 if (fseek(fp
, 0x1014 + e
->base
+ sizeof(struct meta_header
), SEEK_SET
))
3253 error(1, errno
, "Can not seek in the firmware");
3255 if (fread(buf
, data_len
, 1, fp
) != 1)
3256 error(1, errno
, "Can not read fwup-ptn data from the firmware");
3258 /* Check for string ignoring padding character */
3260 for (i
= 0; i
< data_len
- 1; i
++) {
3261 if (!isascii(buf
[i
])) {
3267 printf("\n[Software version]\n");
3269 fwrite(buf
, data_len
, 1, stdout
);
3271 } else if (data_len
>= offsetof(struct soft_version
, rev
)) {
3272 s
= (struct soft_version
*)buf
;
3274 printf("Version: %d.%d.%d\n", s
->version_major
, s
->version_minor
, s
->version_patch
);
3275 printf("Date: %02x%02x-%02x-%02x\n", s
->year_hi
, s
->year_lo
, s
->month
, s
->day
);
3277 printf("Failed to parse data\n");
3283 e
= find_partition(pointers
, MAX_PARTITIONS
, "support-list", NULL
);
3289 if (fseek(fp
, 0x1014 + e
->base
+ sizeof(struct meta_header
), SEEK_SET
))
3290 error(1, errno
, "Can not seek in the firmware");
3292 printf("\n[Support list]\n");
3293 for (length
= e
->size
- sizeof(struct meta_header
); length
; length
-= bytes
) {
3294 bytes
= fread(buf
, 1, length
> sizeof(buf
) ? sizeof(buf
) : length
, fp
);
3296 error(1, errno
, "Can not read fwup-ptn data from the firmware");
3302 e
= find_partition(pointers
, MAX_PARTITIONS
, "partition-table", NULL
);
3304 struct flash_partition_entry parts
[MAX_PARTITIONS
] = { };
3306 if (read_partition_table(fp
, 0x1014 + e
->base
+ 4, parts
, MAX_PARTITIONS
, 1)) {
3307 error(1, 0, "Error can not read the partition table (partition)");
3310 printf("\n[Partition table]\n");
3311 printf("%-8s %-8s %s\n", "base", "size", "name");
3312 for (i
= 0; i
< MAX_PARTITIONS
; i
++) {
3315 if (!e
->name
&& !e
->base
&& !e
->size
)
3318 printf("%08x %08x %s\n", e
->base
, e
->size
, e
->name
? e
->name
: "");
3327 static void write_ff(FILE *output_file
, size_t size
)
3332 memset(buf
, 0xff, sizeof(buf
));
3334 for (offset
= 0; offset
+ sizeof(buf
) < size
; offset
+= sizeof(buf
)) {
3335 if (fwrite(buf
, sizeof(buf
), 1, output_file
) != 1)
3336 error(1, errno
, "Can not write 0xff to output_file");
3339 /* write last chunk smaller than buffer */
3340 if (offset
< size
) {
3341 offset
= size
- offset
;
3342 if (fwrite(buf
, offset
, 1, output_file
) != 1)
3343 error(1, errno
, "Can not write partition to output_file");
3347 static void convert_firmware(const char *input
, const char *output
)
3349 struct flash_partition_entry fwup
[MAX_PARTITIONS
] = { 0 };
3350 struct flash_partition_entry flash
[MAX_PARTITIONS
] = { 0 };
3351 struct flash_partition_entry
*fwup_os_image
= NULL
, *fwup_file_system
= NULL
;
3352 struct flash_partition_entry
*flash_os_image
= NULL
, *flash_file_system
= NULL
;
3353 struct flash_partition_entry
*fwup_partition_table
= NULL
;
3354 size_t firmware_offset
= 0x1014;
3355 FILE *input_file
, *output_file
;
3357 struct stat statbuf
;
3359 /* check input file */
3360 if (stat(input
, &statbuf
)) {
3361 error(1, errno
, "Can not read input firmware %s", input
);
3364 input_file
= fopen(input
, "rb");
3366 error(1, 0, "Can not open input firmware %s", input
);
3368 output_file
= fopen(output
, "wb");
3370 error(1, 0, "Can not open output firmware %s", output
);
3372 if (read_partition_table(input_file
, firmware_offset
, fwup
, MAX_PARTITIONS
, 0) != 0) {
3373 error(1, 0, "Error can not read the partition table (fwup-ptn)");
3376 fwup_os_image
= find_partition(fwup
, MAX_PARTITIONS
,
3377 "os-image", "Error can not find os-image partition (fwup)");
3378 fwup_file_system
= find_partition(fwup
, MAX_PARTITIONS
,
3379 "file-system", "Error can not find file-system partition (fwup)");
3380 fwup_partition_table
= find_partition(fwup
, MAX_PARTITIONS
,
3381 "partition-table", "Error can not find partition-table partition");
3383 /* the flash partition table has a 0x00000004 magic haeder */
3384 if (read_partition_table(input_file
, firmware_offset
+ fwup_partition_table
->base
+ 4, flash
, MAX_PARTITIONS
, 1) != 0)
3385 error(1, 0, "Error can not read the partition table (flash)");
3387 flash_os_image
= find_partition(flash
, MAX_PARTITIONS
,
3388 "os-image", "Error can not find os-image partition (flash)");
3389 flash_file_system
= find_partition(flash
, MAX_PARTITIONS
,
3390 "file-system", "Error can not find file-system partition (flash)");
3392 /* write os_image to 0x0 */
3393 write_partition(input_file
, firmware_offset
, fwup_os_image
, output_file
);
3394 write_ff(output_file
, flash_os_image
->size
- fwup_os_image
->size
);
3396 /* write file-system behind os_image */
3397 fseek(output_file
, flash_file_system
->base
- flash_os_image
->base
, SEEK_SET
);
3398 write_partition(input_file
, firmware_offset
, fwup_file_system
, output_file
);
3399 write_ff(output_file
, flash_file_system
->size
- fwup_file_system
->size
);
3401 fclose(output_file
);
3405 int main(int argc
, char *argv
[]) {
3406 const char *info_image
= NULL
, *board
= NULL
, *kernel_image
= NULL
, *rootfs_image
= NULL
, *output
= NULL
;
3407 const char *extract_image
= NULL
, *output_directory
= NULL
, *convert_image
= NULL
;
3408 bool add_jffs2_eof
= false, sysupgrade
= false;
3410 struct device_info
*info
;
3411 set_source_date_epoch();
3416 c
= getopt(argc
, argv
, "i:B:k:r:o:V:jSh:x:d:z:");
3422 info_image
= optarg
;
3430 kernel_image
= optarg
;
3434 rootfs_image
= optarg
;
3442 sscanf(optarg
, "r%u", &rev
);
3446 add_jffs2_eof
= true;
3458 output_directory
= optarg
;
3462 extract_image
= optarg
;
3466 convert_image
= optarg
;
3476 firmware_info(info_image
);
3477 } else if (extract_image
|| output_directory
) {
3479 error(1, 0, "No factory/oem image given via -x <file>. Output directory is only valid with -x");
3480 if (!output_directory
)
3481 error(1, 0, "Can not extract an image without output directory. Use -d <dir>");
3482 extract_firmware(extract_image
, output_directory
);
3483 } else if (convert_image
) {
3485 error(1, 0, "Can not convert a factory/oem image into sysupgrade image without output file. Use -o <file>");
3486 convert_firmware(convert_image
, output
);
3489 error(1, 0, "no board has been specified");
3491 error(1, 0, "no kernel image has been specified");
3493 error(1, 0, "no rootfs image has been specified");
3495 error(1, 0, "no output filename has been specified");
3497 info
= find_board(board
);
3500 error(1, 0, "unsupported board %s", board
);
3502 build_image(output
, kernel_image
, rootfs_image
, rev
, add_jffs2_eof
, sysupgrade
, info
);