2 Copyright (c) 2014, Matthias Schiffer <mschiffer@universe-factory.net>
5 Redistribution and use in source and binary forms, with or without
6 modification, are permitted provided that the following conditions are met:
8 1. Redistributions of source code must retain the above copyright notice,
9 this list of conditions and the following disclaimer.
10 2. Redistributions in binary form must reproduce the above copyright notice,
11 this list of conditions and the following disclaimer in the documentation
12 and/or other materials provided with the distribution.
14 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
15 AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16 IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
17 DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
18 FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19 DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
20 SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
21 CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
22 OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
23 OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
30 Image generation tool for the TP-LINK SafeLoader as seen on
31 TP-LINK Pharos devices (CPE210/220/510/520)
45 #include <arpa/inet.h>
47 #include <sys/types.h>
54 #define ALIGN(x,a) ({ typeof(a) __a = (a); (((x) + __a - 1) & ~(__a - 1)); })
57 #define MAX_PARTITIONS 32
59 /** An image partition table entry */
60 struct image_partition_entry
{
66 /** A flash partition table entry */
67 struct flash_partition_entry
{
73 /** Firmware layout description */
77 const char *support_list
;
80 struct flash_partition_entry partitions
[MAX_PARTITIONS
+1];
81 const char *first_sysupgrade_partition
;
82 const char *last_sysupgrade_partition
;
85 /** The content of the soft-version structure */
86 struct __attribute__((__packed__
)) soft_version
{
90 uint8_t version_major
;
91 uint8_t version_minor
;
92 uint8_t version_patch
;
102 static const uint8_t jffs2_eof_mark
[4] = {0xde, 0xad, 0xc0, 0xde};
106 Salt for the MD5 hash
108 Fortunately, TP-LINK seems to use the same salt for most devices which use
109 the new image format.
111 static const uint8_t md5_salt
[16] = {
112 0x7a, 0x2b, 0x15, 0xed,
113 0x9b, 0x98, 0x59, 0x6d,
114 0xe5, 0x04, 0xab, 0x44,
115 0xac, 0x2a, 0x9f, 0x4e,
119 /** Firmware layout table */
120 static struct device_info boards
[] = {
121 /** Firmware layout for the CPE210/220 V1 */
124 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
127 "CPE210(TP-LINK|UN|N300-2):1.0\r\n"
128 "CPE210(TP-LINK|UN|N300-2):1.1\r\n"
129 "CPE210(TP-LINK|US|N300-2):1.1\r\n"
130 "CPE210(TP-LINK|EU|N300-2):1.1\r\n"
131 "CPE220(TP-LINK|UN|N300-2):1.1\r\n"
132 "CPE220(TP-LINK|US|N300-2):1.1\r\n"
133 "CPE220(TP-LINK|EU|N300-2):1.1\r\n",
134 .support_trail
= '\xff',
138 {"fs-uboot", 0x00000, 0x20000},
139 {"partition-table", 0x20000, 0x02000},
140 {"default-mac", 0x30000, 0x00020},
141 {"product-info", 0x31100, 0x00100},
142 {"signature", 0x32000, 0x00400},
143 {"os-image", 0x40000, 0x200000},
144 {"file-system", 0x240000, 0x570000},
145 {"soft-version", 0x7b0000, 0x00100},
146 {"support-list", 0x7b1000, 0x00400},
147 {"user-config", 0x7c0000, 0x10000},
148 {"default-config", 0x7d0000, 0x10000},
149 {"log", 0x7e0000, 0x10000},
150 {"radio", 0x7f0000, 0x10000},
154 .first_sysupgrade_partition
= "os-image",
155 .last_sysupgrade_partition
= "support-list",
158 /** Firmware layout for the CPE210 V2 */
161 .vendor
= "CPE210(TP-LINK|UN|N300-2|00000000):2.0\r\n",
164 "CPE210(TP-LINK|EU|N300-2|00000000):2.0\r\n"
165 "CPE210(TP-LINK|EU|N300-2|45550000):2.0\r\n"
166 "CPE210(TP-LINK|EU|N300-2|55530000):2.0\r\n"
167 "CPE210(TP-LINK|UN|N300-2|00000000):2.0\r\n"
168 "CPE210(TP-LINK|UN|N300-2|45550000):2.0\r\n"
169 "CPE210(TP-LINK|UN|N300-2|55530000):2.0\r\n"
170 "CPE210(TP-LINK|US|N300-2|55530000):2.0\r\n"
171 "CPE210(TP-LINK|UN|N300-2):2.0\r\n"
172 "CPE210(TP-LINK|EU|N300-2):2.0\r\n"
173 "CPE210(TP-LINK|US|N300-2):2.0\r\n",
174 .support_trail
= '\xff',
178 {"fs-uboot", 0x00000, 0x20000},
179 {"partition-table", 0x20000, 0x02000},
180 {"default-mac", 0x30000, 0x00020},
181 {"product-info", 0x31100, 0x00100},
182 {"device-info", 0x31400, 0x00400},
183 {"signature", 0x32000, 0x00400},
184 {"device-id", 0x33000, 0x00100},
185 {"firmware", 0x40000, 0x770000},
186 {"soft-version", 0x7b0000, 0x00100},
187 {"support-list", 0x7b1000, 0x01000},
188 {"user-config", 0x7c0000, 0x10000},
189 {"default-config", 0x7d0000, 0x10000},
190 {"log", 0x7e0000, 0x10000},
191 {"radio", 0x7f0000, 0x10000},
195 .first_sysupgrade_partition
= "os-image",
196 .last_sysupgrade_partition
= "support-list",
199 /** Firmware layout for the CPE210 V3 */
202 .vendor
= "CPE210(TP-LINK|UN|N300-2|00000000):3.0\r\n",
205 "CPE210(TP-LINK|EU|N300-2|45550000):3.0\r\n"
206 "CPE210(TP-LINK|UN|N300-2|00000000):3.0\r\n"
207 "CPE210(TP-LINK|UN|N300-2):3.0\r\n"
208 "CPE210(TP-LINK|EU|N300-2):3.0\r\n",
209 .support_trail
= '\xff',
213 {"fs-uboot", 0x00000, 0x20000},
214 {"partition-table", 0x20000, 0x01000},
215 {"default-mac", 0x30000, 0x00020},
216 {"product-info", 0x31100, 0x00100},
217 {"device-info", 0x31400, 0x00400},
218 {"signature", 0x32000, 0x00400},
219 {"device-id", 0x33000, 0x00100},
220 {"firmware", 0x40000, 0x770000},
221 {"soft-version", 0x7b0000, 0x00100},
222 {"support-list", 0x7b1000, 0x01000},
223 {"user-config", 0x7c0000, 0x10000},
224 {"default-config", 0x7d0000, 0x10000},
225 {"log", 0x7e0000, 0x10000},
226 {"radio", 0x7f0000, 0x10000},
230 .first_sysupgrade_partition
= "os-image",
231 .last_sysupgrade_partition
= "support-list",
234 /** Firmware layout for the CPE220 V2 */
237 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
240 "CPE220(TP-LINK|EU|N300-2|00000000):2.0\r\n"
241 "CPE220(TP-LINK|EU|N300-2|45550000):2.0\r\n"
242 "CPE220(TP-LINK|EU|N300-2|55530000):2.0\r\n"
243 "CPE220(TP-LINK|UN|N300-2|00000000):2.0\r\n"
244 "CPE220(TP-LINK|UN|N300-2|45550000):2.0\r\n"
245 "CPE220(TP-LINK|UN|N300-2|55530000):2.0\r\n"
246 "CPE220(TP-LINK|US|N300-2|55530000):2.0\r\n"
247 "CPE220(TP-LINK|UN|N300-2):2.0\r\n"
248 "CPE220(TP-LINK|EU|N300-2):2.0\r\n"
249 "CPE220(TP-LINK|US|N300-2):2.0\r\n",
250 .support_trail
= '\xff',
254 {"fs-uboot", 0x00000, 0x20000},
255 {"partition-table", 0x20000, 0x02000},
256 {"default-mac", 0x30000, 0x00020},
257 {"product-info", 0x31100, 0x00100},
258 {"signature", 0x32000, 0x00400},
259 {"os-image", 0x40000, 0x200000},
260 {"file-system", 0x240000, 0x570000},
261 {"soft-version", 0x7b0000, 0x00100},
262 {"support-list", 0x7b1000, 0x00400},
263 {"user-config", 0x7c0000, 0x10000},
264 {"default-config", 0x7d0000, 0x10000},
265 {"log", 0x7e0000, 0x10000},
266 {"radio", 0x7f0000, 0x10000},
270 .first_sysupgrade_partition
= "os-image",
271 .last_sysupgrade_partition
= "support-list",
274 /** Firmware layout for the CPE220 V3 */
277 .vendor
= "CPE220(TP-LINK|UN|N300-2|00000000):3.0\r\n",
280 "CPE220(TP-LINK|EU|N300-2|00000000):3.0\r\n"
281 "CPE220(TP-LINK|EU|N300-2|45550000):3.0\r\n"
282 "CPE220(TP-LINK|EU|N300-2|55530000):3.0\r\n"
283 "CPE220(TP-LINK|UN|N300-2|00000000):3.0\r\n"
284 "CPE220(TP-LINK|UN|N300-2|45550000):3.0\r\n"
285 "CPE220(TP-LINK|UN|N300-2|55530000):3.0\r\n"
286 "CPE220(TP-LINK|US|N300-2|55530000):3.0\r\n"
287 "CPE220(TP-LINK|UN|N300-2):3.0\r\n"
288 "CPE220(TP-LINK|EU|N300-2):3.0\r\n"
289 "CPE220(TP-LINK|US|N300-2):3.0\r\n",
290 .support_trail
= '\xff',
294 {"fs-uboot", 0x00000, 0x20000},
295 {"partition-table", 0x20000, 0x02000},
296 {"default-mac", 0x30000, 0x00020},
297 {"product-info", 0x31100, 0x00100},
298 {"device-info", 0x31400, 0x00400},
299 {"signature", 0x32000, 0x00400},
300 {"device-id", 0x33000, 0x00100},
301 {"firmware", 0x40000, 0x770000},
302 {"soft-version", 0x7b0000, 0x00100},
303 {"support-list", 0x7b1000, 0x01000},
304 {"user-config", 0x7c0000, 0x10000},
305 {"default-config", 0x7d0000, 0x10000},
306 {"log", 0x7e0000, 0x10000},
307 {"radio", 0x7f0000, 0x10000},
311 .first_sysupgrade_partition
= "os-image",
312 .last_sysupgrade_partition
= "support-list",
315 /** Firmware layout for the CPE510/520 V1 */
318 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
321 "CPE510(TP-LINK|UN|N300-5):1.0\r\n"
322 "CPE510(TP-LINK|UN|N300-5):1.1\r\n"
323 "CPE510(TP-LINK|UN|N300-5):1.1\r\n"
324 "CPE510(TP-LINK|US|N300-5):1.1\r\n"
325 "CPE510(TP-LINK|EU|N300-5):1.1\r\n"
326 "CPE520(TP-LINK|UN|N300-5):1.1\r\n"
327 "CPE520(TP-LINK|US|N300-5):1.1\r\n"
328 "CPE520(TP-LINK|EU|N300-5):1.1\r\n",
329 .support_trail
= '\xff',
333 {"fs-uboot", 0x00000, 0x20000},
334 {"partition-table", 0x20000, 0x02000},
335 {"default-mac", 0x30000, 0x00020},
336 {"product-info", 0x31100, 0x00100},
337 {"signature", 0x32000, 0x00400},
338 {"os-image", 0x40000, 0x200000},
339 {"file-system", 0x240000, 0x570000},
340 {"soft-version", 0x7b0000, 0x00100},
341 {"support-list", 0x7b1000, 0x00400},
342 {"user-config", 0x7c0000, 0x10000},
343 {"default-config", 0x7d0000, 0x10000},
344 {"log", 0x7e0000, 0x10000},
345 {"radio", 0x7f0000, 0x10000},
349 .first_sysupgrade_partition
= "os-image",
350 .last_sysupgrade_partition
= "support-list",
353 /** Firmware layout for the CPE510 V2 */
356 .vendor
= "CPE510(TP-LINK|UN|N300-5):2.0\r\n",
359 "CPE510(TP-LINK|EU|N300-5|00000000):2.0\r\n"
360 "CPE510(TP-LINK|EU|N300-5|45550000):2.0\r\n"
361 "CPE510(TP-LINK|EU|N300-5|55530000):2.0\r\n"
362 "CPE510(TP-LINK|UN|N300-5|00000000):2.0\r\n"
363 "CPE510(TP-LINK|UN|N300-5|45550000):2.0\r\n"
364 "CPE510(TP-LINK|UN|N300-5|55530000):2.0\r\n"
365 "CPE510(TP-LINK|US|N300-5|00000000):2.0\r\n"
366 "CPE510(TP-LINK|US|N300-5|45550000):2.0\r\n"
367 "CPE510(TP-LINK|US|N300-5|55530000):2.0\r\n"
368 "CPE510(TP-LINK|UN|N300-5):2.0\r\n"
369 "CPE510(TP-LINK|EU|N300-5):2.0\r\n"
370 "CPE510(TP-LINK|US|N300-5):2.0\r\n",
371 .support_trail
= '\xff',
375 {"fs-uboot", 0x00000, 0x20000},
376 {"partition-table", 0x20000, 0x02000},
377 {"default-mac", 0x30000, 0x00020},
378 {"product-info", 0x31100, 0x00100},
379 {"signature", 0x32000, 0x00400},
380 {"os-image", 0x40000, 0x200000},
381 {"file-system", 0x240000, 0x570000},
382 {"soft-version", 0x7b0000, 0x00100},
383 {"support-list", 0x7b1000, 0x00400},
384 {"user-config", 0x7c0000, 0x10000},
385 {"default-config", 0x7d0000, 0x10000},
386 {"log", 0x7e0000, 0x10000},
387 {"radio", 0x7f0000, 0x10000},
391 .first_sysupgrade_partition
= "os-image",
392 .last_sysupgrade_partition
= "support-list",
395 /** Firmware layout for the CPE510 V3 */
398 .vendor
= "CPE510(TP-LINK|UN|N300-5):3.0\r\n",
401 "CPE510(TP-LINK|EU|N300-5|00000000):3.0\r\n"
402 "CPE510(TP-LINK|EU|N300-5|45550000):3.0\r\n"
403 "CPE510(TP-LINK|EU|N300-5|55530000):3.0\r\n"
404 "CPE510(TP-LINK|UN|N300-5|00000000):3.0\r\n"
405 "CPE510(TP-LINK|UN|N300-5|45550000):3.0\r\n"
406 "CPE510(TP-LINK|UN|N300-5|55530000):3.0\r\n"
407 "CPE510(TP-LINK|US|N300-5|00000000):3.0\r\n"
408 "CPE510(TP-LINK|US|N300-5|45550000):3.0\r\n"
409 "CPE510(TP-LINK|US|N300-5|55530000):3.0\r\n"
410 "CPE510(TP-LINK|UN|N300-5):3.0\r\n"
411 "CPE510(TP-LINK|EU|N300-5):3.0\r\n"
412 "CPE510(TP-LINK|US|N300-5):3.0\r\n",
413 .support_trail
= '\xff',
417 {"fs-uboot", 0x00000, 0x20000},
418 {"partition-table", 0x20000, 0x02000},
419 {"default-mac", 0x30000, 0x00020},
420 {"product-info", 0x31100, 0x00100},
421 {"signature", 0x32000, 0x00400},
422 {"os-image", 0x40000, 0x200000},
423 {"file-system", 0x240000, 0x570000},
424 {"soft-version", 0x7b0000, 0x00100},
425 {"support-list", 0x7b1000, 0x00400},
426 {"user-config", 0x7c0000, 0x10000},
427 {"default-config", 0x7d0000, 0x10000},
428 {"log", 0x7e0000, 0x10000},
429 {"radio", 0x7f0000, 0x10000},
433 .first_sysupgrade_partition
= "os-image",
434 .last_sysupgrade_partition
= "support-list",
437 /** Firmware layout for the CPE610V1 */
440 .vendor
= "CPE610(TP-LINK|UN|N300-5|00000000):1.0\r\n",
443 "CPE610(TP-LINK|EU|N300-5|00000000):1.0\r\n"
444 "CPE610(TP-LINK|EU|N300-5|45550000):1.0\r\n"
445 "CPE610(TP-LINK|EU|N300-5|55530000):1.0\r\n"
446 "CPE610(TP-LINK|UN|N300-5|00000000):1.0\r\n"
447 "CPE610(TP-LINK|UN|N300-5|45550000):1.0\r\n"
448 "CPE610(TP-LINK|UN|N300-5|55530000):1.0\r\n"
449 "CPE610(TP-LINK|US|N300-5|55530000):1.0\r\n"
450 "CPE610(TP-LINK|UN|N300-5):1.0\r\n"
451 "CPE610(TP-LINK|EU|N300-5):1.0\r\n"
452 "CPE610(TP-LINK|US|N300-5):1.0\r\n",
453 .support_trail
= '\xff',
457 {"fs-uboot", 0x00000, 0x20000},
458 {"partition-table", 0x20000, 0x02000},
459 {"default-mac", 0x30000, 0x00020},
460 {"product-info", 0x31100, 0x00100},
461 {"signature", 0x32000, 0x00400},
462 {"os-image", 0x40000, 0x200000},
463 {"file-system", 0x240000, 0x570000},
464 {"soft-version", 0x7b0000, 0x00100},
465 {"support-list", 0x7b1000, 0x00400},
466 {"user-config", 0x7c0000, 0x10000},
467 {"default-config", 0x7d0000, 0x10000},
468 {"log", 0x7e0000, 0x10000},
469 {"radio", 0x7f0000, 0x10000},
473 .first_sysupgrade_partition
= "os-image",
474 .last_sysupgrade_partition
= "support-list",
477 /** Firmware layout for the CPE610V2 */
480 .vendor
= "CPE610(TP-LINK|UN|N300-5|00000000):2.0\r\n",
483 "CPE610(TP-LINK|EU|N300-5|00000000):2.0\r\n"
484 "CPE610(TP-LINK|EU|N300-5|45550000):2.0\r\n"
485 "CPE610(TP-LINK|EU|N300-5|55530000):2.0\r\n"
486 "CPE610(TP-LINK|UN|N300-5|00000000):2.0\r\n"
487 "CPE610(TP-LINK|UN|N300-5|45550000):2.0\r\n"
488 "CPE610(TP-LINK|UN|N300-5|55530000):2.0\r\n"
489 "CPE610(TP-LINK|US|N300-5|55530000):2.0\r\n"
490 "CPE610(TP-LINK|UN|N300-5):2.0\r\n"
491 "CPE610(TP-LINK|EU|N300-5):2.0\r\n"
492 "CPE610(TP-LINK|US|N300-5):2.0\r\n",
493 .support_trail
= '\xff',
497 {"fs-uboot", 0x00000, 0x20000},
498 {"partition-table", 0x20000, 0x02000},
499 {"default-mac", 0x30000, 0x00020},
500 {"product-info", 0x31100, 0x00100},
501 {"signature", 0x32000, 0x00400},
502 {"os-image", 0x40000, 0x200000},
503 {"file-system", 0x240000, 0x570000},
504 {"soft-version", 0x7b0000, 0x00100},
505 {"support-list", 0x7b1000, 0x00400},
506 {"user-config", 0x7c0000, 0x10000},
507 {"default-config", 0x7d0000, 0x10000},
508 {"log", 0x7e0000, 0x10000},
509 {"radio", 0x7f0000, 0x10000},
513 .first_sysupgrade_partition
= "os-image",
514 .last_sysupgrade_partition
= "support-list",
519 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
522 "WBS210(TP-LINK|UN|N300-2):1.20\r\n"
523 "WBS210(TP-LINK|US|N300-2):1.20\r\n"
524 "WBS210(TP-LINK|EU|N300-2):1.20\r\n",
525 .support_trail
= '\xff',
529 {"fs-uboot", 0x00000, 0x20000},
530 {"partition-table", 0x20000, 0x02000},
531 {"default-mac", 0x30000, 0x00020},
532 {"product-info", 0x31100, 0x00100},
533 {"signature", 0x32000, 0x00400},
534 {"os-image", 0x40000, 0x200000},
535 {"file-system", 0x240000, 0x570000},
536 {"soft-version", 0x7b0000, 0x00100},
537 {"support-list", 0x7b1000, 0x00400},
538 {"user-config", 0x7c0000, 0x10000},
539 {"default-config", 0x7d0000, 0x10000},
540 {"log", 0x7e0000, 0x10000},
541 {"radio", 0x7f0000, 0x10000},
545 .first_sysupgrade_partition
= "os-image",
546 .last_sysupgrade_partition
= "support-list",
551 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
554 "WBS210(TP-LINK|UN|N300-2|00000000):2.0\r\n"
555 "WBS210(TP-LINK|US|N300-2|55530000):2.0\r\n"
556 "WBS210(TP-LINK|EU|N300-2|45550000):2.0\r\n",
557 .support_trail
= '\xff',
561 {"fs-uboot", 0x00000, 0x20000},
562 {"partition-table", 0x20000, 0x02000},
563 {"default-mac", 0x30000, 0x00020},
564 {"product-info", 0x31100, 0x00100},
565 {"signature", 0x32000, 0x00400},
566 {"os-image", 0x40000, 0x200000},
567 {"file-system", 0x240000, 0x570000},
568 {"soft-version", 0x7b0000, 0x00100},
569 {"support-list", 0x7b1000, 0x00400},
570 {"user-config", 0x7c0000, 0x10000},
571 {"default-config", 0x7d0000, 0x10000},
572 {"log", 0x7e0000, 0x10000},
573 {"radio", 0x7f0000, 0x10000},
577 .first_sysupgrade_partition
= "os-image",
578 .last_sysupgrade_partition
= "support-list",
583 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
586 "WBS510(TP-LINK|UN|N300-5):1.20\r\n"
587 "WBS510(TP-LINK|US|N300-5):1.20\r\n"
588 "WBS510(TP-LINK|EU|N300-5):1.20\r\n"
589 "WBS510(TP-LINK|CA|N300-5):1.20\r\n",
590 .support_trail
= '\xff',
594 {"fs-uboot", 0x00000, 0x20000},
595 {"partition-table", 0x20000, 0x02000},
596 {"default-mac", 0x30000, 0x00020},
597 {"product-info", 0x31100, 0x00100},
598 {"signature", 0x32000, 0x00400},
599 {"os-image", 0x40000, 0x200000},
600 {"file-system", 0x240000, 0x570000},
601 {"soft-version", 0x7b0000, 0x00100},
602 {"support-list", 0x7b1000, 0x00400},
603 {"user-config", 0x7c0000, 0x10000},
604 {"default-config", 0x7d0000, 0x10000},
605 {"log", 0x7e0000, 0x10000},
606 {"radio", 0x7f0000, 0x10000},
610 .first_sysupgrade_partition
= "os-image",
611 .last_sysupgrade_partition
= "support-list",
616 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
619 "WBS510(TP-LINK|UN|N300-5|00000000):2.0\r\n"
620 "WBS510(TP-LINK|US|N300-5|55530000):2.0\r\n"
621 "WBS510(TP-LINK|EU|N300-5|45550000):2.0\r\n"
622 "WBS510(TP-LINK|CA|N300-5|43410000):2.0\r\n",
623 .support_trail
= '\xff',
627 {"fs-uboot", 0x00000, 0x20000},
628 {"partition-table", 0x20000, 0x02000},
629 {"default-mac", 0x30000, 0x00020},
630 {"product-info", 0x31100, 0x00100},
631 {"signature", 0x32000, 0x00400},
632 {"os-image", 0x40000, 0x200000},
633 {"file-system", 0x240000, 0x570000},
634 {"soft-version", 0x7b0000, 0x00100},
635 {"support-list", 0x7b1000, 0x00400},
636 {"user-config", 0x7c0000, 0x10000},
637 {"default-config", 0x7d0000, 0x10000},
638 {"log", 0x7e0000, 0x10000},
639 {"radio", 0x7f0000, 0x10000},
643 .first_sysupgrade_partition
= "os-image",
644 .last_sysupgrade_partition
= "support-list",
647 /** Firmware layout for the C2600 */
653 "{product_name:Archer C2600,product_ver:1.0.0,special_id:00000000}\r\n",
654 .support_trail
= '\x00',
658 We use a bigger os-image partition than the stock images (and thus
659 smaller file-system), as our kernel doesn't fit in the stock firmware's
660 2 MB os-image since kernel 4.14.
663 {"SBL1", 0x00000, 0x20000},
664 {"MIBIB", 0x20000, 0x20000},
665 {"SBL2", 0x40000, 0x20000},
666 {"SBL3", 0x60000, 0x30000},
667 {"DDRCONFIG", 0x90000, 0x10000},
668 {"SSD", 0xa0000, 0x10000},
669 {"TZ", 0xb0000, 0x30000},
670 {"RPM", 0xe0000, 0x20000},
671 {"fs-uboot", 0x100000, 0x70000},
672 {"uboot-env", 0x170000, 0x40000},
673 {"radio", 0x1b0000, 0x40000},
674 {"os-image", 0x1f0000, 0x400000}, /* Stock: base 0x1f0000 size 0x200000 */
675 {"file-system", 0x5f0000, 0x1900000}, /* Stock: base 0x3f0000 size 0x1b00000 */
676 {"default-mac", 0x1ef0000, 0x00200},
677 {"pin", 0x1ef0200, 0x00200},
678 {"product-info", 0x1ef0400, 0x0fc00},
679 {"partition-table", 0x1f00000, 0x10000},
680 {"soft-version", 0x1f10000, 0x10000},
681 {"support-list", 0x1f20000, 0x10000},
682 {"profile", 0x1f30000, 0x10000},
683 {"default-config", 0x1f40000, 0x10000},
684 {"user-config", 0x1f50000, 0x40000},
685 {"qos-db", 0x1f90000, 0x40000},
686 {"usb-config", 0x1fd0000, 0x10000},
687 {"log", 0x1fe0000, 0x20000},
691 .first_sysupgrade_partition
= "os-image",
692 .last_sysupgrade_partition
= "file-system"
695 /** Firmware layout for the A7-V5 */
697 .id
= "ARCHER-A7-V5",
700 "{product_name:Archer A7,product_ver:5.0.0,special_id:45550000}\n"
701 "{product_name:Archer A7,product_ver:5.0.0,special_id:55530000}\n"
702 "{product_name:Archer A7,product_ver:5.0.0,special_id:43410000}\n"
703 "{product_name:Archer A7,product_ver:5.0.0,special_id:4A500000}\n"
704 "{product_name:Archer A7,product_ver:5.0.0,special_id:54570000}\n",
705 .support_trail
= '\x00',
706 .soft_ver
= "soft_ver:1.0.0\n",
708 /* We're using a dynamic kernel/rootfs split here */
710 {"factory-boot", 0x00000, 0x20000},
711 {"fs-uboot", 0x20000, 0x20000},
712 {"firmware", 0x40000, 0xec0000}, /* Stock: name os-image base 0x40000 size 0x120000 */
713 /* Stock: name file-system base 0x160000 size 0xda0000 */
714 {"default-mac", 0xf40000, 0x00200},
715 {"pin", 0xf40200, 0x00200},
716 {"device-id", 0xf40400, 0x00100},
717 {"product-info", 0xf40500, 0x0fb00},
718 {"soft-version", 0xf50000, 0x00100},
719 {"extra-para", 0xf51000, 0x01000},
720 {"support-list", 0xf52000, 0x0a000},
721 {"profile", 0xf5c000, 0x04000},
722 {"default-config", 0xf60000, 0x10000},
723 {"user-config", 0xf70000, 0x40000},
724 {"certificate", 0xfb0000, 0x10000},
725 {"partition-table", 0xfc0000, 0x10000},
726 {"log", 0xfd0000, 0x20000},
727 {"radio", 0xff0000, 0x10000},
731 .first_sysupgrade_partition
= "os-image",
732 .last_sysupgrade_partition
= "file-system",
735 /** Firmware layout for the C2v3 */
737 .id
= "ARCHER-C2-V3",
740 "{product_name:ArcherC2,product_ver:3.0.0,special_id:00000000}\n"
741 "{product_name:ArcherC2,product_ver:3.0.0,special_id:55530000}\n"
742 "{product_name:ArcherC2,product_ver:3.0.0,special_id:45550000}\n",
743 .support_trail
= '\x00',
744 .soft_ver
= "soft_ver:3.0.1\n",
746 /** We're using a dynamic kernel/rootfs split here */
749 {"factory-boot", 0x00000, 0x20000},
750 {"fs-uboot", 0x20000, 0x10000},
751 {"firmware", 0x30000, 0x7a0000},
752 {"user-config", 0x7d0000, 0x04000},
753 {"default-mac", 0x7e0000, 0x00100},
754 {"device-id", 0x7e0100, 0x00100},
755 {"extra-para", 0x7e0200, 0x00100},
756 {"pin", 0x7e0300, 0x00100},
757 {"support-list", 0x7e0400, 0x00400},
758 {"soft-version", 0x7e0800, 0x00400},
759 {"product-info", 0x7e0c00, 0x01400},
760 {"partition-table", 0x7e2000, 0x01000},
761 {"profile", 0x7e3000, 0x01000},
762 {"default-config", 0x7e4000, 0x04000},
763 {"merge-config", 0x7ec000, 0x02000},
764 {"qos-db", 0x7ee000, 0x02000},
765 {"radio", 0x7f0000, 0x10000},
769 .first_sysupgrade_partition
= "os-image",
770 .last_sysupgrade_partition
= "file-system",
773 /** Firmware layout for the C25v1 */
775 .id
= "ARCHER-C25-V1",
778 "{product_name:ArcherC25,product_ver:1.0.0,special_id:00000000}\n"
779 "{product_name:ArcherC25,product_ver:1.0.0,special_id:55530000}\n"
780 "{product_name:ArcherC25,product_ver:1.0.0,special_id:45550000}\n",
781 .support_trail
= '\x00',
782 .soft_ver
= "soft_ver:1.0.0\n",
784 /* We're using a dynamic kernel/rootfs split here */
786 {"factory-boot", 0x00000, 0x20000},
787 {"fs-uboot", 0x20000, 0x10000},
788 {"firmware", 0x30000, 0x7a0000}, /* Stock: name os-image base 0x30000 size 0x100000 */
789 /* Stock: name file-system base 0x130000 size 0x6a0000 */
790 {"user-config", 0x7d0000, 0x04000},
791 {"default-mac", 0x7e0000, 0x00100},
792 {"device-id", 0x7e0100, 0x00100},
793 {"extra-para", 0x7e0200, 0x00100},
794 {"pin", 0x7e0300, 0x00100},
795 {"support-list", 0x7e0400, 0x00400},
796 {"soft-version", 0x7e0800, 0x00400},
797 {"product-info", 0x7e0c00, 0x01400},
798 {"partition-table", 0x7e2000, 0x01000},
799 {"profile", 0x7e3000, 0x01000},
800 {"default-config", 0x7e4000, 0x04000},
801 {"merge-config", 0x7ec000, 0x02000},
802 {"qos-db", 0x7ee000, 0x02000},
803 {"radio", 0x7f0000, 0x10000},
807 .first_sysupgrade_partition
= "os-image",
808 .last_sysupgrade_partition
= "file-system",
811 /** Firmware layout for the C58v1 */
813 .id
= "ARCHER-C58-V1",
817 "{product_name:Archer C58,product_ver:1.0.0,special_id:00000000}\r\n"
818 "{product_name:Archer C58,product_ver:1.0.0,special_id:45550000}\r\n"
819 "{product_name:Archer C58,product_ver:1.0.0,special_id:55530000}\r\n",
820 .support_trail
= '\x00',
821 .soft_ver
= "soft_ver:1.0.0\n",
824 {"fs-uboot", 0x00000, 0x10000},
825 {"default-mac", 0x10000, 0x00200},
826 {"pin", 0x10200, 0x00200},
827 {"product-info", 0x10400, 0x00100},
828 {"partition-table", 0x10500, 0x00800},
829 {"soft-version", 0x11300, 0x00200},
830 {"support-list", 0x11500, 0x00100},
831 {"device-id", 0x11600, 0x00100},
832 {"profile", 0x11700, 0x03900},
833 {"default-config", 0x15000, 0x04000},
834 {"user-config", 0x19000, 0x04000},
835 {"firmware", 0x20000, 0x7c8000},
836 {"certyficate", 0x7e8000, 0x08000},
837 {"radio", 0x7f0000, 0x10000},
841 .first_sysupgrade_partition
= "os-image",
842 .last_sysupgrade_partition
= "file-system",
845 /** Firmware layout for the C59v1 */
847 .id
= "ARCHER-C59-V1",
851 "{product_name:Archer C59,product_ver:1.0.0,special_id:00000000}\r\n"
852 "{product_name:Archer C59,product_ver:1.0.0,special_id:45550000}\r\n"
853 "{product_name:Archer C59,product_ver:1.0.0,special_id:52550000}\r\n"
854 "{product_name:Archer C59,product_ver:1.0.0,special_id:55530000}\r\n",
855 .support_trail
= '\x00',
856 .soft_ver
= "soft_ver:1.0.0\n",
858 /* We're using a dynamic kernel/rootfs split here */
860 {"fs-uboot", 0x00000, 0x10000},
861 {"default-mac", 0x10000, 0x00200},
862 {"pin", 0x10200, 0x00200},
863 {"device-id", 0x10400, 0x00100},
864 {"product-info", 0x10500, 0x0fb00},
865 {"firmware", 0x20000, 0xe30000},
866 {"partition-table", 0xe50000, 0x10000},
867 {"soft-version", 0xe60000, 0x10000},
868 {"support-list", 0xe70000, 0x10000},
869 {"profile", 0xe80000, 0x10000},
870 {"default-config", 0xe90000, 0x10000},
871 {"user-config", 0xea0000, 0x40000},
872 {"usb-config", 0xee0000, 0x10000},
873 {"certificate", 0xef0000, 0x10000},
874 {"qos-db", 0xf00000, 0x40000},
875 {"log", 0xfe0000, 0x10000},
876 {"radio", 0xff0000, 0x10000},
880 .first_sysupgrade_partition
= "os-image",
881 .last_sysupgrade_partition
= "file-system",
884 /** Firmware layout for the C59v2 */
886 .id
= "ARCHER-C59-V2",
890 "{product_name:Archer C59,product_ver:2.0.0,special_id:00000000}\r\n"
891 "{product_name:Archer C59,product_ver:2.0.0,special_id:45550000}\r\n"
892 "{product_name:Archer C59,product_ver:2.0.0,special_id:55530000}\r\n",
893 .support_trail
= '\x00',
894 .soft_ver
= "soft_ver:2.0.0 Build 20161206 rel.7303\n",
896 /** We're using a dynamic kernel/rootfs split here */
898 {"factory-boot", 0x00000, 0x20000},
899 {"fs-uboot", 0x20000, 0x10000},
900 {"default-mac", 0x30000, 0x00200},
901 {"pin", 0x30200, 0x00200},
902 {"device-id", 0x30400, 0x00100},
903 {"product-info", 0x30500, 0x0fb00},
904 {"firmware", 0x40000, 0xe10000},
905 {"partition-table", 0xe50000, 0x10000},
906 {"soft-version", 0xe60000, 0x10000},
907 {"support-list", 0xe70000, 0x10000},
908 {"profile", 0xe80000, 0x10000},
909 {"default-config", 0xe90000, 0x10000},
910 {"user-config", 0xea0000, 0x40000},
911 {"usb-config", 0xee0000, 0x10000},
912 {"certificate", 0xef0000, 0x10000},
913 {"extra-para", 0xf00000, 0x10000},
914 {"qos-db", 0xf10000, 0x30000},
915 {"log", 0xfe0000, 0x10000},
916 {"radio", 0xff0000, 0x10000},
920 .first_sysupgrade_partition
= "os-image",
921 .last_sysupgrade_partition
= "file-system",
924 /** Firmware layout for the Archer C6 v2 (EU/RU/JP) */
926 .id
= "ARCHER-C6-V2",
930 "{product_name:Archer C6,product_ver:2.0.0,special_id:45550000}\r\n"
931 "{product_name:Archer C6,product_ver:2.0.0,special_id:52550000}\r\n"
932 "{product_name:Archer C6,product_ver:2.0.0,special_id:4A500000}\r\n",
933 .support_trail
= '\x00',
934 .soft_ver
= "soft_ver:1.2.1\n",
937 {"fs-uboot", 0x00000, 0x20000},
938 {"default-mac", 0x20000, 0x00200},
939 {"pin", 0x20200, 0x00100},
940 {"product-info", 0x20300, 0x00200},
941 {"device-id", 0x20500, 0x0fb00},
942 {"firmware", 0x30000, 0x7a9400},
943 {"soft-version", 0x7d9400, 0x00100},
944 {"extra-para", 0x7d9500, 0x00100},
945 {"support-list", 0x7d9600, 0x00200},
946 {"profile", 0x7d9800, 0x03000},
947 {"default-config", 0x7dc800, 0x03000},
948 {"partition-table", 0x7df800, 0x00800},
949 {"user-config", 0x7e0000, 0x0c000},
950 {"certificate", 0x7ec000, 0x04000},
951 {"radio", 0x7f0000, 0x10000},
955 .first_sysupgrade_partition
= "os-image",
956 .last_sysupgrade_partition
= "file-system",
959 /** Firmware layout for the Archer C6 v2 (US) and A6 v2 (US/TW) */
961 .id
= "ARCHER-C6-V2-US",
965 "{product_name:Archer A6,product_ver:2.0.0,special_id:55530000}\n"
966 "{product_name:Archer A6,product_ver:2.0.0,special_id:54570000}\n"
967 "{product_name:Archer C6,product_ver:2.0.0,special_id:55530000}\n",
968 .support_trail
= '\x00',
969 .soft_ver
= "soft_ver:1.1.1\n",
972 {"factory-boot", 0x00000, 0x20000},
973 {"default-mac", 0x20000, 0x00200},
974 {"pin", 0x20200, 0x00100},
975 {"product-info", 0x20300, 0x00200},
976 {"device-id", 0x20500, 0x0fb00},
977 {"fs-uboot", 0x30000, 0x20000},
978 {"firmware", 0x50000, 0xf89400},
979 {"soft-version", 0xfd9400, 0x00100},
980 {"extra-para", 0xfd9500, 0x00100},
981 {"support-list", 0xfd9600, 0x00200},
982 {"profile", 0xfd9800, 0x03000},
983 {"default-config", 0xfdc800, 0x03000},
984 {"partition-table", 0xfdf800, 0x00800},
985 {"user-config", 0xfe0000, 0x0c000},
986 {"certificate", 0xfec000, 0x04000},
987 {"radio", 0xff0000, 0x10000},
990 .first_sysupgrade_partition
= "os-image",
991 .last_sysupgrade_partition
= "file-system",
994 /** Firmware layout for the C60v1 */
996 .id
= "ARCHER-C60-V1",
1000 "{product_name:Archer C60,product_ver:1.0.0,special_id:00000000}\r\n"
1001 "{product_name:Archer C60,product_ver:1.0.0,special_id:45550000}\r\n"
1002 "{product_name:Archer C60,product_ver:1.0.0,special_id:55530000}\r\n",
1003 .support_trail
= '\x00',
1004 .soft_ver
= "soft_ver:1.0.0\n",
1007 {"fs-uboot", 0x00000, 0x10000},
1008 {"default-mac", 0x10000, 0x00200},
1009 {"pin", 0x10200, 0x00200},
1010 {"product-info", 0x10400, 0x00100},
1011 {"partition-table", 0x10500, 0x00800},
1012 {"soft-version", 0x11300, 0x00200},
1013 {"support-list", 0x11500, 0x00100},
1014 {"device-id", 0x11600, 0x00100},
1015 {"profile", 0x11700, 0x03900},
1016 {"default-config", 0x15000, 0x04000},
1017 {"user-config", 0x19000, 0x04000},
1018 {"firmware", 0x20000, 0x7c8000},
1019 {"certyficate", 0x7e8000, 0x08000},
1020 {"radio", 0x7f0000, 0x10000},
1024 .first_sysupgrade_partition
= "os-image",
1025 .last_sysupgrade_partition
= "file-system",
1028 /** Firmware layout for the C60v2 */
1030 .id
= "ARCHER-C60-V2",
1034 "{product_name:Archer C60,product_ver:2.0.0,special_id:42520000}\r\n"
1035 "{product_name:Archer C60,product_ver:2.0.0,special_id:45550000}\r\n"
1036 "{product_name:Archer C60,product_ver:2.0.0,special_id:55530000}\r\n",
1037 .support_trail
= '\x00',
1038 .soft_ver
= "soft_ver:2.0.0\n",
1041 {"factory-boot", 0x00000, 0x1fb00},
1042 {"default-mac", 0x1fb00, 0x00200},
1043 {"pin", 0x1fd00, 0x00100},
1044 {"product-info", 0x1fe00, 0x00100},
1045 {"device-id", 0x1ff00, 0x00100},
1046 {"fs-uboot", 0x20000, 0x10000},
1047 {"firmware", 0x30000, 0x7a0000},
1048 {"soft-version", 0x7d9500, 0x00100},
1049 {"support-list", 0x7d9600, 0x00100},
1050 {"extra-para", 0x7d9700, 0x00100},
1051 {"profile", 0x7d9800, 0x03000},
1052 {"default-config", 0x7dc800, 0x03000},
1053 {"partition-table", 0x7df800, 0x00800},
1054 {"user-config", 0x7e0000, 0x0c000},
1055 {"certificate", 0x7ec000, 0x04000},
1056 {"radio", 0x7f0000, 0x10000},
1060 .first_sysupgrade_partition
= "os-image",
1061 .last_sysupgrade_partition
= "file-system",
1064 /** Firmware layout for the C60v3 */
1066 .id
= "ARCHER-C60-V3",
1070 "{product_name:Archer C60,product_ver:3.0.0,special_id:42520000}\r\n"
1071 "{product_name:Archer C60,product_ver:3.0.0,special_id:45550000}\r\n"
1072 "{product_name:Archer C60,product_ver:3.0.0,special_id:55530000}\r\n",
1073 .support_trail
= '\x00',
1074 .soft_ver
= "soft_ver:3.0.0\n",
1077 {"factory-boot", 0x00000, 0x1fb00},
1078 {"default-mac", 0x1fb00, 0x00200},
1079 {"pin", 0x1fd00, 0x00100},
1080 {"product-info", 0x1fe00, 0x00100},
1081 {"device-id", 0x1ff00, 0x00100},
1082 {"fs-uboot", 0x20000, 0x10000},
1083 {"firmware", 0x30000, 0x7a0000},
1084 {"soft-version", 0x7d9500, 0x00100},
1085 {"support-list", 0x7d9600, 0x00100},
1086 {"extra-para", 0x7d9700, 0x00100},
1087 {"profile", 0x7d9800, 0x03000},
1088 {"default-config", 0x7dc800, 0x03000},
1089 {"partition-table", 0x7df800, 0x00800},
1090 {"user-config", 0x7e0000, 0x0c000},
1091 {"certificate", 0x7ec000, 0x04000},
1092 {"radio", 0x7f0000, 0x10000},
1096 .first_sysupgrade_partition
= "os-image",
1097 .last_sysupgrade_partition
= "file-system",
1100 /** Firmware layout for the C5 */
1102 .id
= "ARCHER-C5-V2",
1106 "{product_name:ArcherC5,product_ver:2.0.0,special_id:00000000}\r\n"
1107 "{product_name:ArcherC5,product_ver:2.0.0,special_id:55530000}\r\n"
1108 "{product_name:ArcherC5,product_ver:2.0.0,special_id:4A500000}\r\n", /* JP version */
1109 .support_trail
= '\x00',
1113 {"fs-uboot", 0x00000, 0x40000},
1114 {"os-image", 0x40000, 0x200000},
1115 {"file-system", 0x240000, 0xc00000},
1116 {"default-mac", 0xe40000, 0x00200},
1117 {"pin", 0xe40200, 0x00200},
1118 {"product-info", 0xe40400, 0x00200},
1119 {"partition-table", 0xe50000, 0x10000},
1120 {"soft-version", 0xe60000, 0x00200},
1121 {"support-list", 0xe61000, 0x0f000},
1122 {"profile", 0xe70000, 0x10000},
1123 {"default-config", 0xe80000, 0x10000},
1124 {"user-config", 0xe90000, 0x50000},
1125 {"log", 0xee0000, 0x100000},
1126 {"radio_bk", 0xfe0000, 0x10000},
1127 {"radio", 0xff0000, 0x10000},
1131 .first_sysupgrade_partition
= "os-image",
1132 .last_sysupgrade_partition
= "file-system"
1135 /** Firmware layout for the C7 */
1137 .id
= "ARCHER-C7-V4",
1140 "{product_name:Archer C7,product_ver:4.0.0,special_id:00000000}\n"
1141 "{product_name:Archer C7,product_ver:4.0.0,special_id:41550000}\n"
1142 "{product_name:Archer C7,product_ver:4.0.0,special_id:45550000}\n"
1143 "{product_name:Archer C7,product_ver:4.0.0,special_id:4B520000}\n"
1144 "{product_name:Archer C7,product_ver:4.0.0,special_id:42520000}\n"
1145 "{product_name:Archer C7,product_ver:4.0.0,special_id:4A500000}\n"
1146 "{product_name:Archer C7,product_ver:4.0.0,special_id:52550000}\n"
1147 "{product_name:Archer C7,product_ver:4.0.0,special_id:54570000}\n"
1148 "{product_name:Archer C7,product_ver:4.0.0,special_id:55530000}\n"
1149 "{product_name:Archer C7,product_ver:4.0.0,special_id:43410000}\n",
1150 .support_trail
= '\x00',
1151 .soft_ver
= "soft_ver:1.0.0\n",
1153 /* We're using a dynamic kernel/rootfs split here */
1155 {"factory-boot", 0x00000, 0x20000},
1156 {"fs-uboot", 0x20000, 0x20000},
1157 {"firmware", 0x40000, 0xEC0000}, /* Stock: name os-image base 0x40000 size 0x120000 */
1158 /* Stock: name file-system base 0x160000 size 0xda0000 */
1159 {"default-mac", 0xf00000, 0x00200},
1160 {"pin", 0xf00200, 0x00200},
1161 {"device-id", 0xf00400, 0x00100},
1162 {"product-info", 0xf00500, 0x0fb00},
1163 {"soft-version", 0xf10000, 0x00100},
1164 {"extra-para", 0xf11000, 0x01000},
1165 {"support-list", 0xf12000, 0x0a000},
1166 {"profile", 0xf1c000, 0x04000},
1167 {"default-config", 0xf20000, 0x10000},
1168 {"user-config", 0xf30000, 0x40000},
1169 {"qos-db", 0xf70000, 0x40000},
1170 {"certificate", 0xfb0000, 0x10000},
1171 {"partition-table", 0xfc0000, 0x10000},
1172 {"log", 0xfd0000, 0x20000},
1173 {"radio", 0xff0000, 0x10000},
1177 .first_sysupgrade_partition
= "os-image",
1178 .last_sysupgrade_partition
= "file-system",
1181 /** Firmware layout for the C7 v5*/
1183 .id
= "ARCHER-C7-V5",
1186 "{product_name:Archer C7,product_ver:5.0.0,special_id:00000000}\n"
1187 "{product_name:Archer C7,product_ver:5.0.0,special_id:45550000}\n"
1188 "{product_name:Archer C7,product_ver:5.0.0,special_id:55530000}\n"
1189 "{product_name:Archer C7,product_ver:5.0.0,special_id:43410000}\n"
1190 "{product_name:Archer C7,product_ver:5.0.0,special_id:4A500000}\n"
1191 "{product_name:Archer C7,product_ver:5.0.0,special_id:54570000}\n"
1192 "{product_name:Archer C7,product_ver:5.0.0,special_id:52550000}\n"
1193 "{product_name:Archer C7,product_ver:5.0.0,special_id:4B520000}\n",
1195 .support_trail
= '\x00',
1196 .soft_ver
= "soft_ver:1.0.0\n",
1198 /* We're using a dynamic kernel/rootfs split here */
1200 {"factory-boot", 0x00000, 0x20000},
1201 {"fs-uboot", 0x20000, 0x20000},
1202 {"partition-table", 0x40000, 0x10000},
1203 {"radio", 0x50000, 0x10000},
1204 {"default-mac", 0x60000, 0x00200},
1205 {"pin", 0x60200, 0x00200},
1206 {"device-id", 0x60400, 0x00100},
1207 {"product-info", 0x60500, 0x0fb00},
1208 {"soft-version", 0x70000, 0x01000},
1209 {"extra-para", 0x71000, 0x01000},
1210 {"support-list", 0x72000, 0x0a000},
1211 {"profile", 0x7c000, 0x04000},
1212 {"user-config", 0x80000, 0x40000},
1215 {"firmware", 0xc0000, 0xf00000}, /* Stock: name os-image base 0xc0000 size 0x120000 */
1216 /* Stock: name file-system base 0x1e0000 size 0xde0000 */
1218 {"log", 0xfc0000, 0x20000},
1219 {"certificate", 0xfe0000, 0x10000},
1220 {"default-config", 0xff0000, 0x10000},
1225 .first_sysupgrade_partition
= "os-image",
1226 .last_sysupgrade_partition
= "file-system",
1229 /** Firmware layout for the C9 */
1235 "{product_name:ArcherC9,"
1236 "product_ver:1.0.0,"
1237 "special_id:00000000}\n",
1238 .support_trail
= '\x00',
1242 {"fs-uboot", 0x00000, 0x40000},
1243 {"os-image", 0x40000, 0x200000},
1244 {"file-system", 0x240000, 0xc00000},
1245 {"default-mac", 0xe40000, 0x00200},
1246 {"pin", 0xe40200, 0x00200},
1247 {"product-info", 0xe40400, 0x00200},
1248 {"partition-table", 0xe50000, 0x10000},
1249 {"soft-version", 0xe60000, 0x00200},
1250 {"support-list", 0xe61000, 0x0f000},
1251 {"profile", 0xe70000, 0x10000},
1252 {"default-config", 0xe80000, 0x10000},
1253 {"user-config", 0xe90000, 0x50000},
1254 {"log", 0xee0000, 0x100000},
1255 {"radio_bk", 0xfe0000, 0x10000},
1256 {"radio", 0xff0000, 0x10000},
1260 .first_sysupgrade_partition
= "os-image",
1261 .last_sysupgrade_partition
= "file-system"
1264 /** Firmware layout for the EAP120 */
1267 .vendor
= "EAP120(TP-LINK|UN|N300-2):1.0\r\n",
1270 "EAP120(TP-LINK|UN|N300-2):1.0\r\n",
1271 .support_trail
= '\xff',
1275 {"fs-uboot", 0x00000, 0x20000},
1276 {"partition-table", 0x20000, 0x02000},
1277 {"default-mac", 0x30000, 0x00020},
1278 {"support-list", 0x31000, 0x00100},
1279 {"product-info", 0x31100, 0x00100},
1280 {"soft-version", 0x32000, 0x00100},
1281 {"os-image", 0x40000, 0x180000},
1282 {"file-system", 0x1c0000, 0x600000},
1283 {"user-config", 0x7c0000, 0x10000},
1284 {"backup-config", 0x7d0000, 0x10000},
1285 {"log", 0x7e0000, 0x10000},
1286 {"radio", 0x7f0000, 0x10000},
1290 .first_sysupgrade_partition
= "os-image",
1291 .last_sysupgrade_partition
= "file-system"
1294 /** Firmware layout for the TL-WA850RE v2 */
1296 .id
= "TLWA850REV2",
1300 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:55530000}\n"
1301 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:00000000}\n"
1302 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:55534100}\n"
1303 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:45550000}\n"
1304 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:4B520000}\n"
1305 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:42520000}\n"
1306 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:4A500000}\n"
1307 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:43410000}\n"
1308 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:41550000}\n"
1309 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:52550000}\n",
1310 .support_trail
= '\x00',
1314 576KB were moved from file-system to os-image
1315 in comparison to the stock image
1318 {"fs-uboot", 0x00000, 0x20000},
1319 {"firmware", 0x20000, 0x390000},
1320 {"partition-table", 0x3b0000, 0x02000},
1321 {"default-mac", 0x3c0000, 0x00020},
1322 {"pin", 0x3c0100, 0x00020},
1323 {"product-info", 0x3c1000, 0x01000},
1324 {"soft-version", 0x3c2000, 0x00100},
1325 {"support-list", 0x3c3000, 0x01000},
1326 {"profile", 0x3c4000, 0x08000},
1327 {"user-config", 0x3d0000, 0x10000},
1328 {"default-config", 0x3e0000, 0x10000},
1329 {"radio", 0x3f0000, 0x10000},
1333 .first_sysupgrade_partition
= "os-image",
1334 .last_sysupgrade_partition
= "file-system"
1337 /** Firmware layout for the TL-WA855RE v1 */
1339 .id
= "TLWA855REV1",
1343 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:00000000}\n"
1344 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:55530000}\n"
1345 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:45550000}\n"
1346 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:4B520000}\n"
1347 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:42520000}\n"
1348 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:4A500000}\n"
1349 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:43410000}\n"
1350 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:41550000}\n"
1351 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:52550000}\n",
1352 .support_trail
= '\x00',
1356 {"fs-uboot", 0x00000, 0x20000},
1357 {"os-image", 0x20000, 0x150000},
1358 {"file-system", 0x170000, 0x240000},
1359 {"partition-table", 0x3b0000, 0x02000},
1360 {"default-mac", 0x3c0000, 0x00020},
1361 {"pin", 0x3c0100, 0x00020},
1362 {"product-info", 0x3c1000, 0x01000},
1363 {"soft-version", 0x3c2000, 0x00100},
1364 {"support-list", 0x3c3000, 0x01000},
1365 {"profile", 0x3c4000, 0x08000},
1366 {"user-config", 0x3d0000, 0x10000},
1367 {"default-config", 0x3e0000, 0x10000},
1368 {"radio", 0x3f0000, 0x10000},
1372 .first_sysupgrade_partition
= "os-image",
1373 .last_sysupgrade_partition
= "file-system"
1376 /** Firmware layout for the TL-WR1043 v5 */
1378 .id
= "TLWR1043NV5",
1382 "{product_name:TL-WR1043N,product_ver:5.0.0,special_id:45550000}\n"
1383 "{product_name:TL-WR1043N,product_ver:5.0.0,special_id:55530000}\n",
1384 .support_trail
= '\x00',
1385 .soft_ver
= "soft_ver:1.0.0\n",
1387 {"factory-boot", 0x00000, 0x20000},
1388 {"fs-uboot", 0x20000, 0x20000},
1389 {"firmware", 0x40000, 0xec0000},
1390 {"default-mac", 0xf00000, 0x00200},
1391 {"pin", 0xf00200, 0x00200},
1392 {"device-id", 0xf00400, 0x00100},
1393 {"product-info", 0xf00500, 0x0fb00},
1394 {"soft-version", 0xf10000, 0x01000},
1395 {"extra-para", 0xf11000, 0x01000},
1396 {"support-list", 0xf12000, 0x0a000},
1397 {"profile", 0xf1c000, 0x04000},
1398 {"default-config", 0xf20000, 0x10000},
1399 {"user-config", 0xf30000, 0x40000},
1400 {"qos-db", 0xf70000, 0x40000},
1401 {"certificate", 0xfb0000, 0x10000},
1402 {"partition-table", 0xfc0000, 0x10000},
1403 {"log", 0xfd0000, 0x20000},
1404 {"radio", 0xff0000, 0x10000},
1407 .first_sysupgrade_partition
= "os-image",
1408 .last_sysupgrade_partition
= "file-system"
1411 /** Firmware layout for the TL-WR1043 v4 */
1413 .id
= "TLWR1043NDV4",
1417 "{product_name:TL-WR1043ND,product_ver:4.0.0,special_id:45550000}\n",
1418 .support_trail
= '\x00',
1421 /* We're using a dynamic kernel/rootfs split here */
1423 {"fs-uboot", 0x00000, 0x20000},
1424 {"firmware", 0x20000, 0xf30000},
1425 {"default-mac", 0xf50000, 0x00200},
1426 {"pin", 0xf50200, 0x00200},
1427 {"product-info", 0xf50400, 0x0fc00},
1428 {"soft-version", 0xf60000, 0x0b000},
1429 {"support-list", 0xf6b000, 0x04000},
1430 {"profile", 0xf70000, 0x04000},
1431 {"default-config", 0xf74000, 0x0b000},
1432 {"user-config", 0xf80000, 0x40000},
1433 {"partition-table", 0xfc0000, 0x10000},
1434 {"log", 0xfd0000, 0x20000},
1435 {"radio", 0xff0000, 0x10000},
1439 .first_sysupgrade_partition
= "os-image",
1440 .last_sysupgrade_partition
= "file-system"
1443 /** Firmware layout for the TL-WR902AC v1 */
1445 .id
= "TL-WR902AC-V1",
1449 "{product_name:TL-WR902AC,product_ver:1.0.0,special_id:45550000}\n"
1450 "{product_name:TL-WR902AC,product_ver:1.0.0,special_id:55530000}\n",
1451 .support_trail
= '\x00',
1455 384KB were moved from file-system to os-image
1456 in comparison to the stock image
1459 {"fs-uboot", 0x00000, 0x20000},
1460 {"firmware", 0x20000, 0x730000},
1461 {"default-mac", 0x750000, 0x00200},
1462 {"pin", 0x750200, 0x00200},
1463 {"product-info", 0x750400, 0x0fc00},
1464 {"soft-version", 0x760000, 0x0b000},
1465 {"support-list", 0x76b000, 0x04000},
1466 {"profile", 0x770000, 0x04000},
1467 {"default-config", 0x774000, 0x0b000},
1468 {"user-config", 0x780000, 0x40000},
1469 {"partition-table", 0x7c0000, 0x10000},
1470 {"log", 0x7d0000, 0x20000},
1471 {"radio", 0x7f0000, 0x10000},
1475 .first_sysupgrade_partition
= "os-image",
1476 .last_sysupgrade_partition
= "file-system",
1479 /** Firmware layout for the TL-WR942N V1 */
1485 "{product_name:TL-WR942N,product_ver:1.0.0,special_id:00000000}\r\n"
1486 "{product_name:TL-WR942N,product_ver:1.0.0,special_id:52550000}\r\n",
1487 .support_trail
= '\x00',
1491 {"fs-uboot", 0x00000, 0x20000},
1492 {"firmware", 0x20000, 0xe20000},
1493 {"default-mac", 0xe40000, 0x00200},
1494 {"pin", 0xe40200, 0x00200},
1495 {"product-info", 0xe40400, 0x0fc00},
1496 {"partition-table", 0xe50000, 0x10000},
1497 {"soft-version", 0xe60000, 0x10000},
1498 {"support-list", 0xe70000, 0x10000},
1499 {"profile", 0xe80000, 0x10000},
1500 {"default-config", 0xe90000, 0x10000},
1501 {"user-config", 0xea0000, 0x40000},
1502 {"qos-db", 0xee0000, 0x40000},
1503 {"certificate", 0xf20000, 0x10000},
1504 {"usb-config", 0xfb0000, 0x10000},
1505 {"log", 0xfc0000, 0x20000},
1506 {"radio-bk", 0xfe0000, 0x10000},
1507 {"radio", 0xff0000, 0x10000},
1511 .first_sysupgrade_partition
= "os-image",
1512 .last_sysupgrade_partition
= "file-system",
1515 /** Firmware layout for the RE200 v2 */
1521 "{product_name:RE200,product_ver:2.0.0,special_id:00000000}\n"
1522 "{product_name:RE200,product_ver:2.0.0,special_id:41520000}\n"
1523 "{product_name:RE200,product_ver:2.0.0,special_id:41550000}\n"
1524 "{product_name:RE200,product_ver:2.0.0,special_id:42520000}\n"
1525 "{product_name:RE200,product_ver:2.0.0,special_id:43410000}\n"
1526 "{product_name:RE200,product_ver:2.0.0,special_id:45530000}\n"
1527 "{product_name:RE200,product_ver:2.0.0,special_id:45550000}\n"
1528 "{product_name:RE200,product_ver:2.0.0,special_id:49440000}\n"
1529 "{product_name:RE200,product_ver:2.0.0,special_id:4a500000}\n"
1530 "{product_name:RE200,product_ver:2.0.0,special_id:4b520000}\n"
1531 "{product_name:RE200,product_ver:2.0.0,special_id:52550000}\n"
1532 "{product_name:RE200,product_ver:2.0.0,special_id:54570000}\n"
1533 "{product_name:RE200,product_ver:2.0.0,special_id:55530000}\n",
1534 .support_trail
= '\x00',
1538 {"fs-uboot", 0x00000, 0x20000},
1539 {"firmware", 0x20000, 0x7a0000},
1540 {"partition-table", 0x7c0000, 0x02000},
1541 {"default-mac", 0x7c2000, 0x00020},
1542 {"pin", 0x7c2100, 0x00020},
1543 {"product-info", 0x7c3100, 0x01000},
1544 {"soft-version", 0x7c4200, 0x01000},
1545 {"support-list", 0x7c5200, 0x01000},
1546 {"profile", 0x7c6200, 0x08000},
1547 {"config-info", 0x7ce200, 0x00400},
1548 {"user-config", 0x7d0000, 0x10000},
1549 {"default-config", 0x7e0000, 0x10000},
1550 {"radio", 0x7f0000, 0x10000},
1554 .first_sysupgrade_partition
= "os-image",
1555 .last_sysupgrade_partition
= "file-system"
1558 /** Firmware layout for the RE305 v1 */
1564 "{product_name:RE305,product_ver:1.0.0,special_id:45550000}\n"
1565 "{product_name:RE305,product_ver:1.0.0,special_id:55530000}\n"
1566 "{product_name:RE305,product_ver:1.0.0,special_id:4a500000}\n"
1567 "{product_name:RE305,product_ver:1.0.0,special_id:42520000}\n"
1568 "{product_name:RE305,product_ver:1.0.0,special_id:4b520000}\n"
1569 "{product_name:RE305,product_ver:1.0.0,special_id:41550000}\n"
1570 "{product_name:RE305,product_ver:1.0.0,special_id:43410000}\n",
1571 .support_trail
= '\x00',
1575 {"fs-uboot", 0x00000, 0x20000},
1576 {"firmware", 0x20000, 0x5e0000},
1577 {"partition-table", 0x600000, 0x02000},
1578 {"default-mac", 0x610000, 0x00020},
1579 {"pin", 0x610100, 0x00020},
1580 {"product-info", 0x611100, 0x01000},
1581 {"soft-version", 0x620000, 0x01000},
1582 {"support-list", 0x621000, 0x01000},
1583 {"profile", 0x622000, 0x08000},
1584 {"user-config", 0x630000, 0x10000},
1585 {"default-config", 0x640000, 0x10000},
1586 {"radio", 0x7f0000, 0x10000},
1590 .first_sysupgrade_partition
= "os-image",
1591 .last_sysupgrade_partition
= "file-system"
1594 /** Firmware layout for the RE350 v1 */
1600 "{product_name:RE350,product_ver:1.0.0,special_id:45550000}\n"
1601 "{product_name:RE350,product_ver:1.0.0,special_id:00000000}\n"
1602 "{product_name:RE350,product_ver:1.0.0,special_id:41550000}\n"
1603 "{product_name:RE350,product_ver:1.0.0,special_id:55530000}\n"
1604 "{product_name:RE350,product_ver:1.0.0,special_id:43410000}\n"
1605 "{product_name:RE350,product_ver:1.0.0,special_id:4b520000}\n"
1606 "{product_name:RE350,product_ver:1.0.0,special_id:4a500000}\n",
1607 .support_trail
= '\x00',
1610 /** We're using a dynamic kernel/rootfs split here */
1612 {"fs-uboot", 0x00000, 0x20000},
1613 {"firmware", 0x20000, 0x5e0000},
1614 {"partition-table", 0x600000, 0x02000},
1615 {"default-mac", 0x610000, 0x00020},
1616 {"pin", 0x610100, 0x00020},
1617 {"product-info", 0x611100, 0x01000},
1618 {"soft-version", 0x620000, 0x01000},
1619 {"support-list", 0x621000, 0x01000},
1620 {"profile", 0x622000, 0x08000},
1621 {"user-config", 0x630000, 0x10000},
1622 {"default-config", 0x640000, 0x10000},
1623 {"radio", 0x7f0000, 0x10000},
1627 .first_sysupgrade_partition
= "os-image",
1628 .last_sysupgrade_partition
= "file-system"
1631 /** Firmware layout for the RE350K v1 */
1637 "{product_name:RE350K,product_ver:1.0.0,special_id:00000000,product_region:US}\n",
1638 .support_trail
= '\x00',
1641 /** We're using a dynamic kernel/rootfs split here */
1643 {"fs-uboot", 0x00000, 0x20000},
1644 {"firmware", 0x20000, 0xd70000},
1645 {"partition-table", 0xd90000, 0x02000},
1646 {"default-mac", 0xda0000, 0x00020},
1647 {"pin", 0xda0100, 0x00020},
1648 {"product-info", 0xda1100, 0x01000},
1649 {"soft-version", 0xdb0000, 0x01000},
1650 {"support-list", 0xdb1000, 0x01000},
1651 {"profile", 0xdb2000, 0x08000},
1652 {"user-config", 0xdc0000, 0x10000},
1653 {"default-config", 0xdd0000, 0x10000},
1654 {"device-id", 0xde0000, 0x00108},
1655 {"radio", 0xff0000, 0x10000},
1659 .first_sysupgrade_partition
= "os-image",
1660 .last_sysupgrade_partition
= "file-system"
1663 /** Firmware layout for the RE355 */
1669 "{product_name:RE355,product_ver:1.0.0,special_id:00000000}\r\n"
1670 "{product_name:RE355,product_ver:1.0.0,special_id:55530000}\r\n"
1671 "{product_name:RE355,product_ver:1.0.0,special_id:45550000}\r\n"
1672 "{product_name:RE355,product_ver:1.0.0,special_id:4A500000}\r\n"
1673 "{product_name:RE355,product_ver:1.0.0,special_id:43410000}\r\n"
1674 "{product_name:RE355,product_ver:1.0.0,special_id:41550000}\r\n"
1675 "{product_name:RE355,product_ver:1.0.0,special_id:4B520000}\r\n"
1676 "{product_name:RE355,product_ver:1.0.0,special_id:55534100}\r\n",
1677 .support_trail
= '\x00',
1680 /* We're using a dynamic kernel/rootfs split here */
1682 {"fs-uboot", 0x00000, 0x20000},
1683 {"firmware", 0x20000, 0x5e0000},
1684 {"partition-table", 0x600000, 0x02000},
1685 {"default-mac", 0x610000, 0x00020},
1686 {"pin", 0x610100, 0x00020},
1687 {"product-info", 0x611100, 0x01000},
1688 {"soft-version", 0x620000, 0x01000},
1689 {"support-list", 0x621000, 0x01000},
1690 {"profile", 0x622000, 0x08000},
1691 {"user-config", 0x630000, 0x10000},
1692 {"default-config", 0x640000, 0x10000},
1693 {"radio", 0x7f0000, 0x10000},
1697 .first_sysupgrade_partition
= "os-image",
1698 .last_sysupgrade_partition
= "file-system"
1701 /** Firmware layout for the RE450 */
1707 "{product_name:RE450,product_ver:1.0.0,special_id:00000000}\r\n"
1708 "{product_name:RE450,product_ver:1.0.0,special_id:55530000}\r\n"
1709 "{product_name:RE450,product_ver:1.0.0,special_id:45550000}\r\n"
1710 "{product_name:RE450,product_ver:1.0.0,special_id:4A500000}\r\n"
1711 "{product_name:RE450,product_ver:1.0.0,special_id:43410000}\r\n"
1712 "{product_name:RE450,product_ver:1.0.0,special_id:41550000}\r\n"
1713 "{product_name:RE450,product_ver:1.0.0,special_id:4B520000}\r\n"
1714 "{product_name:RE450,product_ver:1.0.0,special_id:55534100}\r\n",
1715 .support_trail
= '\x00',
1718 /** We're using a dynamic kernel/rootfs split here */
1720 {"fs-uboot", 0x00000, 0x20000},
1721 {"firmware", 0x20000, 0x5e0000},
1722 {"partition-table", 0x600000, 0x02000},
1723 {"default-mac", 0x610000, 0x00020},
1724 {"pin", 0x610100, 0x00020},
1725 {"product-info", 0x611100, 0x01000},
1726 {"soft-version", 0x620000, 0x01000},
1727 {"support-list", 0x621000, 0x01000},
1728 {"profile", 0x622000, 0x08000},
1729 {"user-config", 0x630000, 0x10000},
1730 {"default-config", 0x640000, 0x10000},
1731 {"radio", 0x7f0000, 0x10000},
1735 .first_sysupgrade_partition
= "os-image",
1736 .last_sysupgrade_partition
= "file-system"
1739 /** Firmware layout for the RE450 v2 */
1745 "{product_name:RE450,product_ver:2.0.0,special_id:00000000}\r\n"
1746 "{product_name:RE450,product_ver:2.0.0,special_id:55530000}\r\n"
1747 "{product_name:RE450,product_ver:2.0.0,special_id:45550000}\r\n"
1748 "{product_name:RE450,product_ver:2.0.0,special_id:4A500000}\r\n"
1749 "{product_name:RE450,product_ver:2.0.0,special_id:43410000}\r\n"
1750 "{product_name:RE450,product_ver:2.0.0,special_id:41550000}\r\n"
1751 "{product_name:RE450,product_ver:2.0.0,special_id:41530000}\r\n"
1752 "{product_name:RE450,product_ver:2.0.0,special_id:4B520000}\r\n"
1753 "{product_name:RE450,product_ver:2.0.0,special_id:42520000}\r\n",
1754 .support_trail
= '\x00',
1757 /* We're using a dynamic kernel/rootfs split here */
1759 {"fs-uboot", 0x00000, 0x20000},
1760 {"firmware", 0x20000, 0x5e0000},
1761 {"partition-table", 0x600000, 0x02000},
1762 {"default-mac", 0x610000, 0x00020},
1763 {"pin", 0x610100, 0x00020},
1764 {"product-info", 0x611100, 0x01000},
1765 {"soft-version", 0x620000, 0x01000},
1766 {"support-list", 0x621000, 0x01000},
1767 {"profile", 0x622000, 0x08000},
1768 {"user-config", 0x630000, 0x10000},
1769 {"default-config", 0x640000, 0x10000},
1770 {"radio", 0x7f0000, 0x10000},
1774 .first_sysupgrade_partition
= "os-image",
1775 .last_sysupgrade_partition
= "file-system"
1778 /** Firmware layout for the RE450 v3 */
1784 "{product_name:RE450,product_ver:3.0.0,special_id:00000000}\r\n"
1785 "{product_name:RE450,product_ver:3.0.0,special_id:55530000}\r\n"
1786 "{product_name:RE450,product_ver:3.0.0,special_id:45550000}\r\n"
1787 "{product_name:RE450,product_ver:3.0.0,special_id:4A500000}\r\n"
1788 "{product_name:RE450,product_ver:3.0.0,special_id:43410000}\r\n"
1789 "{product_name:RE450,product_ver:3.0.0,special_id:41550000}\r\n"
1790 "{product_name:RE450,product_ver:3.0.0,special_id:41530000}\r\n"
1791 "{product_name:RE450,product_ver:3.0.0,special_id:4B520000}\r\n"
1792 "{product_name:RE450,product_ver:3.0.0,special_id:42520000}\r\n",
1793 .support_trail
= '\x00',
1796 /* We're using a dynamic kernel/rootfs split here */
1798 {"fs-uboot", 0x00000, 0x20000},
1799 {"default-mac", 0x20000, 0x00020},
1800 {"pin", 0x20020, 0x00020},
1801 {"product-info", 0x21000, 0x01000},
1802 {"partition-table", 0x22000, 0x02000},
1803 {"soft-version", 0x24000, 0x01000},
1804 {"support-list", 0x25000, 0x01000},
1805 {"profile", 0x26000, 0x08000},
1806 {"user-config", 0x2e000, 0x10000},
1807 {"default-config", 0x3e000, 0x10000},
1808 {"config-info", 0x4e000, 0x00400},
1809 {"firmware", 0x50000, 0x7a0000},
1810 {"radio", 0x7f0000, 0x10000},
1814 .first_sysupgrade_partition
= "os-image",
1815 .last_sysupgrade_partition
= "file-system"
1818 /** Firmware layout for the RE650 */
1824 "{product_name:RE650,product_ver:1.0.0,special_id:00000000}\r\n"
1825 "{product_name:RE650,product_ver:1.0.0,special_id:55530000}\r\n"
1826 "{product_name:RE650,product_ver:1.0.0,special_id:45550000}\r\n"
1827 "{product_name:RE650,product_ver:1.0.0,special_id:4A500000}\r\n"
1828 "{product_name:RE650,product_ver:1.0.0,special_id:43410000}\r\n"
1829 "{product_name:RE650,product_ver:1.0.0,special_id:41550000}\r\n"
1830 "{product_name:RE650,product_ver:1.0.0,special_id:41530000}\r\n",
1831 .support_trail
= '\x00',
1834 /* We're using a dynamic kernel/rootfs split here */
1836 {"fs-uboot", 0x00000, 0x20000},
1837 {"firmware", 0x20000, 0xde0000},
1838 {"partition-table", 0xe00000, 0x02000},
1839 {"default-mac", 0xe10000, 0x00020},
1840 {"pin", 0xe10100, 0x00020},
1841 {"product-info", 0xe11100, 0x01000},
1842 {"soft-version", 0xe20000, 0x01000},
1843 {"support-list", 0xe21000, 0x01000},
1844 {"profile", 0xe22000, 0x08000},
1845 {"user-config", 0xe30000, 0x10000},
1846 {"default-config", 0xe40000, 0x10000},
1847 {"radio", 0xff0000, 0x10000},
1851 .first_sysupgrade_partition
= "os-image",
1852 .last_sysupgrade_partition
= "file-system"
1858 #define error(_ret, _errno, _str, ...) \
1860 fprintf(stderr, _str ": %s\n", ## __VA_ARGS__, \
1861 strerror(_errno)); \
1867 /** Stores a uint32 as big endian */
1868 static inline void put32(uint8_t *buf
, uint32_t val
) {
1875 /** Allocates a new image partition */
1876 static struct image_partition_entry
alloc_image_partition(const char *name
, size_t len
) {
1877 struct image_partition_entry entry
= {name
, len
, malloc(len
)};
1879 error(1, errno
, "malloc");
1884 /** Frees an image partition */
1885 static void free_image_partition(struct image_partition_entry entry
) {
1889 static time_t source_date_epoch
= -1;
1890 static void set_source_date_epoch() {
1891 char *env
= getenv("SOURCE_DATE_EPOCH");
1895 source_date_epoch
= strtoull(env
, &endptr
, 10);
1896 if (errno
|| (endptr
&& *endptr
!= '\0')) {
1897 fprintf(stderr
, "Invalid SOURCE_DATE_EPOCH");
1903 /** Generates the partition-table partition */
1904 static struct image_partition_entry
make_partition_table(const struct flash_partition_entry
*p
) {
1905 struct image_partition_entry entry
= alloc_image_partition("partition-table", 0x800);
1907 char *s
= (char *)entry
.data
, *end
= (char *)(s
+entry
.size
);
1915 for (i
= 0; p
[i
].name
; i
++) {
1917 size_t w
= snprintf(s
, len
, "partition %s base 0x%05x size 0x%05x\n", p
[i
].name
, p
[i
].base
, p
[i
].size
);
1920 error(1, 0, "flash partition table overflow?");
1927 memset(s
, 0xff, end
-s
);
1933 /** Generates a binary-coded decimal representation of an integer in the range [0, 99] */
1934 static inline uint8_t bcd(uint8_t v
) {
1935 return 0x10 * (v
/10) + v
%10;
1939 /** Generates the soft-version partition */
1940 static struct image_partition_entry
make_soft_version(uint32_t rev
) {
1941 struct image_partition_entry entry
= alloc_image_partition("soft-version", sizeof(struct soft_version
));
1942 struct soft_version
*s
= (struct soft_version
*)entry
.data
;
1946 if (source_date_epoch
!= -1)
1947 t
= source_date_epoch
;
1948 else if (time(&t
) == (time_t)(-1))
1949 error(1, errno
, "time");
1951 struct tm
*tm
= localtime(&t
);
1953 s
->magic
= htonl(0x0000000c);
1957 s
->version_major
= 0;
1958 s
->version_minor
= 0;
1959 s
->version_patch
= 0;
1961 s
->year_hi
= bcd((1900+tm
->tm_year
)/100);
1962 s
->year_lo
= bcd(tm
->tm_year
%100);
1963 s
->month
= bcd(tm
->tm_mon
+1);
1964 s
->day
= bcd(tm
->tm_mday
);
1965 s
->rev
= htonl(rev
);
1972 static struct image_partition_entry
make_soft_version_from_string(const char *soft_ver
) {
1973 /** String length _including_ the terminating zero byte */
1974 uint32_t ver_len
= strlen(soft_ver
) + 1;
1975 /** Partition contains 64 bit header, the version string, and one additional null byte */
1976 size_t partition_len
= 2*sizeof(uint32_t) + ver_len
+ 1;
1977 struct image_partition_entry entry
= alloc_image_partition("soft-version", partition_len
);
1979 uint32_t *len
= (uint32_t *)entry
.data
;
1980 len
[0] = htonl(ver_len
);
1982 memcpy(&len
[2], soft_ver
, ver_len
);
1984 entry
.data
[partition_len
- 1] = 0;
1989 /** Generates the support-list partition */
1990 static struct image_partition_entry
make_support_list(struct device_info
*info
) {
1991 size_t len
= strlen(info
->support_list
);
1992 struct image_partition_entry entry
= alloc_image_partition("support-list", len
+ 9);
1994 put32(entry
.data
, len
);
1995 memset(entry
.data
+4, 0, 4);
1996 memcpy(entry
.data
+8, info
->support_list
, len
);
1997 entry
.data
[len
+8] = info
->support_trail
;
2002 /** Creates a new image partition with an arbitrary name from a file */
2003 static struct image_partition_entry
read_file(const char *part_name
, const char *filename
, bool add_jffs2_eof
, struct flash_partition_entry
*file_system_partition
) {
2004 struct stat statbuf
;
2006 if (stat(filename
, &statbuf
) < 0)
2007 error(1, errno
, "unable to stat file `%s'", filename
);
2009 size_t len
= statbuf
.st_size
;
2011 if (add_jffs2_eof
) {
2012 if (file_system_partition
)
2013 len
= ALIGN(len
+ file_system_partition
->base
, 0x10000) + sizeof(jffs2_eof_mark
) - file_system_partition
->base
;
2015 len
= ALIGN(len
, 0x10000) + sizeof(jffs2_eof_mark
);
2018 struct image_partition_entry entry
= alloc_image_partition(part_name
, len
);
2020 FILE *file
= fopen(filename
, "rb");
2022 error(1, errno
, "unable to open file `%s'", filename
);
2024 if (fread(entry
.data
, statbuf
.st_size
, 1, file
) != 1)
2025 error(1, errno
, "unable to read file `%s'", filename
);
2027 if (add_jffs2_eof
) {
2028 uint8_t *eof
= entry
.data
+ statbuf
.st_size
, *end
= entry
.data
+entry
.size
;
2030 memset(eof
, 0xff, end
- eof
- sizeof(jffs2_eof_mark
));
2031 memcpy(end
- sizeof(jffs2_eof_mark
), jffs2_eof_mark
, sizeof(jffs2_eof_mark
));
2039 /** Creates a new image partition from arbitrary data */
2040 static struct image_partition_entry
put_data(const char *part_name
, const char *datain
, size_t len
) {
2042 struct image_partition_entry entry
= alloc_image_partition(part_name
, len
);
2044 memcpy(entry
.data
, datain
, len
);
2050 Copies a list of image partitions into an image buffer and generates the image partition table while doing so
2052 Example image partition table:
2054 fwup-ptn partition-table base 0x00800 size 0x00800
2055 fwup-ptn os-image base 0x01000 size 0x113b45
2056 fwup-ptn file-system base 0x114b45 size 0x1d0004
2057 fwup-ptn support-list base 0x2e4b49 size 0x000d1
2059 Each line of the partition table is terminated with the bytes 09 0d 0a ("\t\r\n"),
2060 the end of the partition table is marked with a zero byte.
2062 The firmware image must contain at least the partition-table and support-list partitions
2063 to be accepted. There aren't any alignment constraints for the image partitions.
2065 The partition-table partition contains the actual flash layout; partitions
2066 from the image partition table are mapped to the corresponding flash partitions during
2067 the firmware upgrade. The support-list partition contains a list of devices supported by
2070 The base offsets in the firmware partition table are relative to the end
2071 of the vendor information block, so the partition-table partition will
2072 actually start at offset 0x1814 of the image.
2074 I think partition-table must be the first partition in the firmware image.
2076 static void put_partitions(uint8_t *buffer
, const struct flash_partition_entry
*flash_parts
, const struct image_partition_entry
*parts
) {
2078 char *image_pt
= (char *)buffer
, *end
= image_pt
+ 0x800;
2080 size_t base
= 0x800;
2081 for (i
= 0; parts
[i
].name
; i
++) {
2082 for (j
= 0; flash_parts
[j
].name
; j
++) {
2083 if (!strcmp(flash_parts
[j
].name
, parts
[i
].name
)) {
2084 if (parts
[i
].size
> flash_parts
[j
].size
)
2085 error(1, 0, "%s partition too big (more than %u bytes)", flash_parts
[j
].name
, (unsigned)flash_parts
[j
].size
);
2090 assert(flash_parts
[j
].name
);
2092 memcpy(buffer
+ base
, parts
[i
].data
, parts
[i
].size
);
2094 size_t len
= end
-image_pt
;
2095 size_t w
= snprintf(image_pt
, len
, "fwup-ptn %s base 0x%05x size 0x%05x\t\r\n", parts
[i
].name
, (unsigned)base
, (unsigned)parts
[i
].size
);
2098 error(1, 0, "image partition table overflow?");
2102 base
+= parts
[i
].size
;
2106 /** Generates and writes the image MD5 checksum */
2107 static void put_md5(uint8_t *md5
, uint8_t *buffer
, unsigned int len
) {
2111 MD5_Update(&ctx
, md5_salt
, (unsigned int)sizeof(md5_salt
));
2112 MD5_Update(&ctx
, buffer
, len
);
2113 MD5_Final(md5
, &ctx
);
2118 Generates the firmware image in factory format
2124 0000-0003 Image size (4 bytes, big endian)
2125 0004-0013 MD5 hash (hash of a 16 byte salt and the image data starting with byte 0x14)
2126 0014-0017 Vendor information length (without padding) (4 bytes, big endian)
2127 0018-1013 Vendor information (4092 bytes, padded with 0xff; there seem to be older
2128 (VxWorks-based) TP-LINK devices which use a smaller vendor information block)
2129 1014-1813 Image partition table (2048 bytes, padded with 0xff)
2130 1814-xxxx Firmware partitions
2132 static void * generate_factory_image(struct device_info
*info
, const struct image_partition_entry
*parts
, size_t *len
) {
2136 for (i
= 0; parts
[i
].name
; i
++)
2137 *len
+= parts
[i
].size
;
2139 uint8_t *image
= malloc(*len
);
2141 error(1, errno
, "malloc");
2143 memset(image
, 0xff, *len
);
2147 size_t vendor_len
= strlen(info
->vendor
);
2148 put32(image
+0x14, vendor_len
);
2149 memcpy(image
+0x18, info
->vendor
, vendor_len
);
2152 put_partitions(image
+ 0x1014, info
->partitions
, parts
);
2153 put_md5(image
+0x04, image
+0x14, *len
-0x14);
2159 Generates the firmware image in sysupgrade format
2161 This makes some assumptions about the provided flash and image partition tables and
2162 should be generalized when TP-LINK starts building its safeloader into hardware with
2163 different flash layouts.
2165 static void * generate_sysupgrade_image(struct device_info
*info
, const struct image_partition_entry
*image_parts
, size_t *len
) {
2167 size_t flash_first_partition_index
= 0;
2168 size_t flash_last_partition_index
= 0;
2169 const struct flash_partition_entry
*flash_first_partition
= NULL
;
2170 const struct flash_partition_entry
*flash_last_partition
= NULL
;
2171 const struct image_partition_entry
*image_last_partition
= NULL
;
2173 /** Find first and last partitions */
2174 for (i
= 0; info
->partitions
[i
].name
; i
++) {
2175 if (!strcmp(info
->partitions
[i
].name
, info
->first_sysupgrade_partition
)) {
2176 flash_first_partition
= &info
->partitions
[i
];
2177 flash_first_partition_index
= i
;
2178 } else if (!strcmp(info
->partitions
[i
].name
, info
->last_sysupgrade_partition
)) {
2179 flash_last_partition
= &info
->partitions
[i
];
2180 flash_last_partition_index
= i
;
2184 assert(flash_first_partition
&& flash_last_partition
);
2185 assert(flash_first_partition_index
< flash_last_partition_index
);
2187 /** Find last partition from image to calculate needed size */
2188 for (i
= 0; image_parts
[i
].name
; i
++) {
2189 if (!strcmp(image_parts
[i
].name
, info
->last_sysupgrade_partition
)) {
2190 image_last_partition
= &image_parts
[i
];
2195 assert(image_last_partition
);
2197 *len
= flash_last_partition
->base
- flash_first_partition
->base
+ image_last_partition
->size
;
2199 uint8_t *image
= malloc(*len
);
2201 error(1, errno
, "malloc");
2203 memset(image
, 0xff, *len
);
2205 for (i
= flash_first_partition_index
; i
<= flash_last_partition_index
; i
++) {
2206 for (j
= 0; image_parts
[j
].name
; j
++) {
2207 if (!strcmp(info
->partitions
[i
].name
, image_parts
[j
].name
)) {
2208 if (image_parts
[j
].size
> info
->partitions
[i
].size
)
2209 error(1, 0, "%s partition too big (more than %u bytes)", info
->partitions
[i
].name
, (unsigned)info
->partitions
[i
].size
);
2210 memcpy(image
+ info
->partitions
[i
].base
- flash_first_partition
->base
, image_parts
[j
].data
, image_parts
[j
].size
);
2214 assert(image_parts
[j
].name
);
2221 /** Generates an image according to a given layout and writes it to a file */
2222 static void build_image(const char *output
,
2223 const char *kernel_image
,
2224 const char *rootfs_image
,
2228 struct device_info
*info
) {
2232 struct image_partition_entry parts
[7] = {};
2234 struct flash_partition_entry
*firmware_partition
= NULL
;
2235 struct flash_partition_entry
*os_image_partition
= NULL
;
2236 struct flash_partition_entry
*file_system_partition
= NULL
;
2237 size_t firmware_partition_index
= 0;
2239 for (i
= 0; info
->partitions
[i
].name
; i
++) {
2240 if (!strcmp(info
->partitions
[i
].name
, "firmware"))
2242 firmware_partition
= &info
->partitions
[i
];
2243 firmware_partition_index
= i
;
2247 if (firmware_partition
)
2249 os_image_partition
= &info
->partitions
[firmware_partition_index
];
2250 file_system_partition
= &info
->partitions
[firmware_partition_index
+ 1];
2253 if (stat(kernel_image
, &kernel
) < 0)
2254 error(1, errno
, "unable to stat file `%s'", kernel_image
);
2256 if (kernel
.st_size
> firmware_partition
->size
)
2257 error(1, 0, "kernel overflowed firmware partition\n");
2259 for (i
= MAX_PARTITIONS
-1; i
>= firmware_partition_index
+ 1; i
--)
2260 info
->partitions
[i
+1] = info
->partitions
[i
];
2262 file_system_partition
->name
= "file-system";
2263 file_system_partition
->base
= firmware_partition
->base
+ kernel
.st_size
;
2265 /* Align partition start to erase blocks for factory images only */
2267 file_system_partition
->base
= ALIGN(firmware_partition
->base
+ kernel
.st_size
, 0x10000);
2269 file_system_partition
->size
= firmware_partition
->size
- file_system_partition
->base
;
2271 os_image_partition
->name
= "os-image";
2272 os_image_partition
->size
= kernel
.st_size
;
2275 parts
[0] = make_partition_table(info
->partitions
);
2277 parts
[1] = make_soft_version_from_string(info
->soft_ver
);
2279 parts
[1] = make_soft_version(rev
);
2281 parts
[2] = make_support_list(info
);
2282 parts
[3] = read_file("os-image", kernel_image
, false, NULL
);
2283 parts
[4] = read_file("file-system", rootfs_image
, add_jffs2_eof
, file_system_partition
);
2285 /* Some devices need the extra-para partition to accept the firmware */
2286 if (strcasecmp(info
->id
, "ARCHER-C2-V3") == 0 ||
2287 strcasecmp(info
->id
, "ARCHER-C25-V1") == 0 ||
2288 strcasecmp(info
->id
, "ARCHER-C59-V2") == 0 ||
2289 strcasecmp(info
->id
, "ARCHER-C60-V2") == 0 ||
2290 strcasecmp(info
->id
, "ARCHER-C60-V3") == 0 ||
2291 strcasecmp(info
->id
, "TLWR1043NV5") == 0) {
2292 const char mdat
[11] = {0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00};
2293 parts
[5] = put_data("extra-para", mdat
, 11);
2294 } else if (strcasecmp(info
->id
, "ARCHER-A7-V5") == 0 || strcasecmp(info
->id
, "ARCHER-C7-V4") == 0 || strcasecmp(info
->id
, "ARCHER-C7-V5") == 0) {
2295 const char mdat
[11] = {0x01, 0x00, 0x00, 0x02, 0x00, 0x00, 0xca, 0x00, 0x01, 0x00, 0x00};
2296 parts
[5] = put_data("extra-para", mdat
, 11);
2297 } else if (strcasecmp(info
->id
, "ARCHER-C6-V2") == 0) {
2298 const char mdat
[11] = {0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00};
2299 parts
[5] = put_data("extra-para", mdat
, 11);
2300 } else if (strcasecmp(info
->id
, "ARCHER-C6-V2-US") == 0) {
2301 const char mdat
[11] = {0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x00};
2302 parts
[5] = put_data("extra-para", mdat
, 11);
2308 image
= generate_sysupgrade_image(info
, parts
, &len
);
2310 image
= generate_factory_image(info
, parts
, &len
);
2312 FILE *file
= fopen(output
, "wb");
2314 error(1, errno
, "unable to open output file");
2316 if (fwrite(image
, len
, 1, file
) != 1)
2317 error(1, 0, "unable to write output file");
2323 for (i
= 0; parts
[i
].name
; i
++)
2324 free_image_partition(parts
[i
]);
2328 static void usage(const char *argv0
) {
2330 "Usage: %s [OPTIONS...]\n"
2333 " -h show this help\n"
2335 "Create a new image:\n"
2336 " -B <board> create image for the board specified with <board>\n"
2337 " -k <file> read kernel image from the file <file>\n"
2338 " -r <file> read rootfs image from the file <file>\n"
2339 " -o <file> write output to the file <file>\n"
2340 " -V <rev> sets the revision number to <rev>\n"
2341 " -j add jffs2 end-of-filesystem markers\n"
2342 " -S create sysupgrade instead of factory image\n"
2343 "Extract an old image:\n"
2344 " -x <file> extract all oem firmware partition\n"
2345 " -d <dir> destination to extract the firmware partition\n"
2346 " -z <file> convert an oem firmware into a sysupgade file. Use -o for output file\n",
2352 static struct device_info
*find_board(const char *id
)
2354 struct device_info
*board
= NULL
;
2356 for (board
= boards
; board
->id
!= NULL
; board
++)
2357 if (strcasecmp(id
, board
->id
) == 0)
2363 static int add_flash_partition(
2364 struct flash_partition_entry
*part_list
,
2371 /* check if the list has a free entry */
2372 for (ptr
= 0; ptr
< max_entries
; ptr
++, part_list
++) {
2373 if (part_list
->name
== NULL
&&
2374 part_list
->base
== 0 &&
2375 part_list
->size
== 0)
2379 if (ptr
== max_entries
) {
2380 error(1, 0, "No free flash part entry available.");
2383 part_list
->name
= calloc(1, strlen(name
) + 1);
2384 if (!part_list
->name
) {
2385 error(1, 0, "Unable to allocate memory");
2388 memcpy((char *)part_list
->name
, name
, strlen(name
));
2389 part_list
->base
= base
;
2390 part_list
->size
= size
;
2395 /** read the partition table into struct flash_partition_entry */
2396 static int read_partition_table(
2397 FILE *file
, long offset
,
2398 struct flash_partition_entry
*entries
, size_t max_entries
,
2403 const char *parthdr
= NULL
;
2404 const char *fwuphdr
= "fwup-ptn";
2405 const char *flashhdr
= "partition";
2407 /* TODO: search for the partition table */
2417 error(1, 0, "Invalid partition table");
2420 if (fseek(file
, offset
, SEEK_SET
) < 0)
2421 error(1, errno
, "Can not seek in the firmware");
2423 if (fread(buf
, 2048, 1, file
) != 1)
2424 error(1, errno
, "Can not read fwup-ptn from the firmware");
2428 /* look for the partition header */
2429 if (memcmp(buf
, parthdr
, strlen(parthdr
)) != 0) {
2430 fprintf(stderr
, "DEBUG: can not find fwuphdr\n");
2435 end
= buf
+ sizeof(buf
);
2436 while ((ptr
+ strlen(parthdr
)) < end
&&
2437 memcmp(ptr
, parthdr
, strlen(parthdr
)) == 0) {
2441 char name
[32] = { 0 };
2443 unsigned long base
= 0;
2444 unsigned long size
= 0;
2446 end_part
= memchr(ptr
, '\n', (end
- ptr
));
2447 if (end_part
== NULL
) {
2448 /* in theory this should never happen, because a partition always ends with 0x09, 0x0D, 0x0A */
2452 for (int i
= 0; i
<= 4; i
++) {
2453 if (end_part
<= ptr
)
2456 end_element
= memchr(ptr
, 0x20, (end_part
- ptr
));
2457 if (end_element
== NULL
) {
2458 error(1, errno
, "Ignoring the rest of the partition entries.");
2463 /* partition header */
2465 ptr
= end_element
+ 1;
2469 name_len
= (end_element
- ptr
) > 31 ? 31 : (end_element
- ptr
);
2470 strncpy(name
, ptr
, name_len
);
2471 name
[name_len
] = '\0';
2472 ptr
= end_element
+ 1;
2477 ptr
= end_element
+ 1;
2482 base
= strtoul(ptr
, NULL
, 16);
2483 ptr
= end_element
+ 1;
2488 ptr
= end_element
+ 1;
2489 /* actual size. The last element doesn't have a sepeartor */
2490 size
= strtoul(ptr
, NULL
, 16);
2491 /* the part ends with 0x09, 0x0d, 0x0a */
2493 add_flash_partition(entries
, max_entries
, name
, base
, size
);
2502 static void write_partition(
2504 size_t firmware_offset
,
2505 struct flash_partition_entry
*entry
,
2511 fseek(input_file
, entry
->base
+ firmware_offset
, SEEK_SET
);
2513 for (offset
= 0; sizeof(buf
) + offset
<= entry
->size
; offset
+= sizeof(buf
)) {
2514 if (fread(buf
, sizeof(buf
), 1, input_file
) != 1)
2515 error(1, errno
, "Can not read partition from input_file");
2517 if (fwrite(buf
, sizeof(buf
), 1, output_file
) != 1)
2518 error(1, errno
, "Can not write partition to output_file");
2520 /* write last chunk smaller than buffer */
2521 if (offset
< entry
->size
) {
2522 offset
= entry
->size
- offset
;
2523 if (fread(buf
, offset
, 1, input_file
) != 1)
2524 error(1, errno
, "Can not read partition from input_file");
2525 if (fwrite(buf
, offset
, 1, output_file
) != 1)
2526 error(1, errno
, "Can not write partition to output_file");
2530 static int extract_firmware_partition(FILE *input_file
, size_t firmware_offset
, struct flash_partition_entry
*entry
, const char *output_directory
)
2533 char output
[PATH_MAX
];
2535 snprintf(output
, PATH_MAX
, "%s/%s", output_directory
, entry
->name
);
2536 output_file
= fopen(output
, "wb+");
2537 if (output_file
== NULL
) {
2538 error(1, errno
, "Can not open output file %s", output
);
2541 write_partition(input_file
, firmware_offset
, entry
, output_file
);
2543 fclose(output_file
);
2548 /** extract all partitions from the firmware file */
2549 static int extract_firmware(const char *input
, const char *output_directory
)
2551 struct flash_partition_entry entries
[16] = { 0 };
2552 size_t max_entries
= 16;
2553 size_t firmware_offset
= 0x1014;
2556 struct stat statbuf
;
2558 /* check input file */
2559 if (stat(input
, &statbuf
)) {
2560 error(1, errno
, "Can not read input firmware %s", input
);
2563 /* check if output directory exists */
2564 if (stat(output_directory
, &statbuf
)) {
2565 error(1, errno
, "Failed to stat output directory %s", output_directory
);
2568 if ((statbuf
.st_mode
& S_IFMT
) != S_IFDIR
) {
2569 error(1, errno
, "Given output directory is not a directory %s", output_directory
);
2572 input_file
= fopen(input
, "rb");
2574 if (read_partition_table(input_file
, firmware_offset
, entries
, 16, 0) != 0) {
2575 error(1, 0, "Error can not read the partition table (fwup-ptn)");
2578 for (size_t i
= 0; i
< max_entries
; i
++) {
2579 if (entries
[i
].name
== NULL
&&
2580 entries
[i
].base
== 0 &&
2581 entries
[i
].size
== 0)
2584 extract_firmware_partition(input_file
, firmware_offset
, &entries
[i
], output_directory
);
2590 static struct flash_partition_entry
*find_partition(
2591 struct flash_partition_entry
*entries
, size_t max_entries
,
2592 const char *name
, const char *error_msg
)
2594 for (size_t i
= 0; i
< max_entries
; i
++, entries
++) {
2595 if (strcmp(entries
->name
, name
) == 0)
2599 error(1, 0, "%s", error_msg
);
2603 static void write_ff(FILE *output_file
, size_t size
)
2608 memset(buf
, 0xff, sizeof(buf
));
2610 for (offset
= 0; offset
+ sizeof(buf
) < size
; offset
+= sizeof(buf
)) {
2611 if (fwrite(buf
, sizeof(buf
), 1, output_file
) != 1)
2612 error(1, errno
, "Can not write 0xff to output_file");
2615 /* write last chunk smaller than buffer */
2616 if (offset
< size
) {
2617 offset
= size
- offset
;
2618 if (fwrite(buf
, offset
, 1, output_file
) != 1)
2619 error(1, errno
, "Can not write partition to output_file");
2623 static void convert_firmware(const char *input
, const char *output
)
2625 struct flash_partition_entry fwup
[MAX_PARTITIONS
] = { 0 };
2626 struct flash_partition_entry flash
[MAX_PARTITIONS
] = { 0 };
2627 struct flash_partition_entry
*fwup_os_image
= NULL
, *fwup_file_system
= NULL
;
2628 struct flash_partition_entry
*flash_os_image
= NULL
, *flash_file_system
= NULL
;
2629 struct flash_partition_entry
*fwup_partition_table
= NULL
;
2630 size_t firmware_offset
= 0x1014;
2631 FILE *input_file
, *output_file
;
2633 struct stat statbuf
;
2635 /* check input file */
2636 if (stat(input
, &statbuf
)) {
2637 error(1, errno
, "Can not read input firmware %s", input
);
2640 input_file
= fopen(input
, "rb");
2642 error(1, 0, "Can not open input firmware %s", input
);
2644 output_file
= fopen(output
, "wb");
2646 error(1, 0, "Can not open output firmware %s", output
);
2648 if (read_partition_table(input_file
, firmware_offset
, fwup
, MAX_PARTITIONS
, 0) != 0) {
2649 error(1, 0, "Error can not read the partition table (fwup-ptn)");
2652 fwup_os_image
= find_partition(fwup
, MAX_PARTITIONS
,
2653 "os-image", "Error can not find os-image partition (fwup)");
2654 fwup_file_system
= find_partition(fwup
, MAX_PARTITIONS
,
2655 "file-system", "Error can not find file-system partition (fwup)");
2656 fwup_partition_table
= find_partition(fwup
, MAX_PARTITIONS
,
2657 "partition-table", "Error can not find partition-table partition");
2659 /* the flash partition table has a 0x00000004 magic haeder */
2660 if (read_partition_table(input_file
, firmware_offset
+ fwup_partition_table
->base
+ 4, flash
, MAX_PARTITIONS
, 1) != 0)
2661 error(1, 0, "Error can not read the partition table (flash)");
2663 flash_os_image
= find_partition(flash
, MAX_PARTITIONS
,
2664 "os-image", "Error can not find os-image partition (flash)");
2665 flash_file_system
= find_partition(flash
, MAX_PARTITIONS
,
2666 "file-system", "Error can not find file-system partition (flash)");
2668 /* write os_image to 0x0 */
2669 write_partition(input_file
, firmware_offset
, fwup_os_image
, output_file
);
2670 write_ff(output_file
, flash_os_image
->size
- fwup_os_image
->size
);
2672 /* write file-system behind os_image */
2673 fseek(output_file
, flash_file_system
->base
- flash_os_image
->base
, SEEK_SET
);
2674 write_partition(input_file
, firmware_offset
, fwup_file_system
, output_file
);
2675 write_ff(output_file
, flash_file_system
->size
- fwup_file_system
->size
);
2677 fclose(output_file
);
2681 int main(int argc
, char *argv
[]) {
2682 const char *board
= NULL
, *kernel_image
= NULL
, *rootfs_image
= NULL
, *output
= NULL
;
2683 const char *extract_image
= NULL
, *output_directory
= NULL
, *convert_image
= NULL
;
2684 bool add_jffs2_eof
= false, sysupgrade
= false;
2686 struct device_info
*info
;
2687 set_source_date_epoch();
2692 c
= getopt(argc
, argv
, "B:k:r:o:V:jSh:x:d:z:");
2702 kernel_image
= optarg
;
2706 rootfs_image
= optarg
;
2714 sscanf(optarg
, "r%u", &rev
);
2718 add_jffs2_eof
= true;
2730 output_directory
= optarg
;
2734 extract_image
= optarg
;
2738 convert_image
= optarg
;
2747 if (extract_image
|| output_directory
) {
2749 error(1, 0, "No factory/oem image given via -x <file>. Output directory is only valid with -x");
2750 if (!output_directory
)
2751 error(1, 0, "Can not extract an image without output directory. Use -d <dir>");
2752 extract_firmware(extract_image
, output_directory
);
2753 } else if (convert_image
) {
2755 error(1, 0, "Can not convert a factory/oem image into sysupgrade image without output file. Use -o <file>");
2756 convert_firmware(convert_image
, output
);
2759 error(1, 0, "no board has been specified");
2761 error(1, 0, "no kernel image has been specified");
2763 error(1, 0, "no rootfs image has been specified");
2765 error(1, 0, "no output filename has been specified");
2767 info
= find_board(board
);
2770 error(1, 0, "unsupported board %s", board
);
2772 build_image(output
, kernel_image
, rootfs_image
, rev
, add_jffs2_eof
, sysupgrade
, info
);