2 Copyright (c) 2014, Matthias Schiffer <mschiffer@universe-factory.net>
5 Redistribution and use in source and binary forms, with or without
6 modification, are permitted provided that the following conditions are met:
8 1. Redistributions of source code must retain the above copyright notice,
9 this list of conditions and the following disclaimer.
10 2. Redistributions in binary form must reproduce the above copyright notice,
11 this list of conditions and the following disclaimer in the documentation
12 and/or other materials provided with the distribution.
14 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
15 AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16 IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
17 DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
18 FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19 DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
20 SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
21 CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
22 OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
23 OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
30 Image generation tool for the TP-LINK SafeLoader as seen on
31 TP-LINK Pharos devices (CPE210/220/510/520)
45 #include <arpa/inet.h>
47 #include <sys/types.h>
54 #define ALIGN(x,a) ({ typeof(a) __a = (a); (((x) + __a - 1) & ~(__a - 1)); })
57 #define MAX_PARTITIONS 32
59 /** An image partition table entry */
60 struct image_partition_entry
{
66 /** A flash partition table entry */
67 struct flash_partition_entry
{
73 /** Firmware layout description */
77 const char *support_list
;
80 struct flash_partition_entry partitions
[MAX_PARTITIONS
+1];
81 const char *first_sysupgrade_partition
;
82 const char *last_sysupgrade_partition
;
85 /** The content of the soft-version structure */
86 struct __attribute__((__packed__
)) soft_version
{
90 uint8_t version_major
;
91 uint8_t version_minor
;
92 uint8_t version_patch
;
102 static const uint8_t jffs2_eof_mark
[4] = {0xde, 0xad, 0xc0, 0xde};
106 Salt for the MD5 hash
108 Fortunately, TP-LINK seems to use the same salt for most devices which use
109 the new image format.
111 static const uint8_t md5_salt
[16] = {
112 0x7a, 0x2b, 0x15, 0xed,
113 0x9b, 0x98, 0x59, 0x6d,
114 0xe5, 0x04, 0xab, 0x44,
115 0xac, 0x2a, 0x9f, 0x4e,
119 /** Firmware layout table */
120 static struct device_info boards
[] = {
121 /** Firmware layout for the CPE210/220 V1 */
124 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
127 "CPE210(TP-LINK|UN|N300-2):1.0\r\n"
128 "CPE210(TP-LINK|UN|N300-2):1.1\r\n"
129 "CPE210(TP-LINK|US|N300-2):1.1\r\n"
130 "CPE210(TP-LINK|EU|N300-2):1.1\r\n"
131 "CPE220(TP-LINK|UN|N300-2):1.1\r\n"
132 "CPE220(TP-LINK|US|N300-2):1.1\r\n"
133 "CPE220(TP-LINK|EU|N300-2):1.1\r\n",
134 .support_trail
= '\xff',
138 {"fs-uboot", 0x00000, 0x20000},
139 {"partition-table", 0x20000, 0x02000},
140 {"default-mac", 0x30000, 0x00020},
141 {"product-info", 0x31100, 0x00100},
142 {"signature", 0x32000, 0x00400},
143 {"os-image", 0x40000, 0x200000},
144 {"file-system", 0x240000, 0x570000},
145 {"soft-version", 0x7b0000, 0x00100},
146 {"support-list", 0x7b1000, 0x00400},
147 {"user-config", 0x7c0000, 0x10000},
148 {"default-config", 0x7d0000, 0x10000},
149 {"log", 0x7e0000, 0x10000},
150 {"radio", 0x7f0000, 0x10000},
154 .first_sysupgrade_partition
= "os-image",
155 .last_sysupgrade_partition
= "support-list",
158 /** Firmware layout for the CPE210 V2 */
161 .vendor
= "CPE210(TP-LINK|UN|N300-2|00000000):2.0\r\n",
164 "CPE210(TP-LINK|EU|N300-2|00000000):2.0\r\n"
165 "CPE210(TP-LINK|EU|N300-2|45550000):2.0\r\n"
166 "CPE210(TP-LINK|EU|N300-2|55530000):2.0\r\n"
167 "CPE210(TP-LINK|UN|N300-2|00000000):2.0\r\n"
168 "CPE210(TP-LINK|UN|N300-2|45550000):2.0\r\n"
169 "CPE210(TP-LINK|UN|N300-2|55530000):2.0\r\n"
170 "CPE210(TP-LINK|US|N300-2|55530000):2.0\r\n"
171 "CPE210(TP-LINK|UN|N300-2):2.0\r\n"
172 "CPE210(TP-LINK|EU|N300-2):2.0\r\n"
173 "CPE210(TP-LINK|US|N300-2):2.0\r\n",
174 .support_trail
= '\xff',
178 {"fs-uboot", 0x00000, 0x20000},
179 {"partition-table", 0x20000, 0x02000},
180 {"default-mac", 0x30000, 0x00020},
181 {"product-info", 0x31100, 0x00100},
182 {"device-info", 0x31400, 0x00400},
183 {"signature", 0x32000, 0x00400},
184 {"device-id", 0x33000, 0x00100},
185 {"firmware", 0x40000, 0x770000},
186 {"soft-version", 0x7b0000, 0x00100},
187 {"support-list", 0x7b1000, 0x01000},
188 {"user-config", 0x7c0000, 0x10000},
189 {"default-config", 0x7d0000, 0x10000},
190 {"log", 0x7e0000, 0x10000},
191 {"radio", 0x7f0000, 0x10000},
195 .first_sysupgrade_partition
= "os-image",
196 .last_sysupgrade_partition
= "support-list",
199 /** Firmware layout for the CPE210 V3 */
202 .vendor
= "CPE210(TP-LINK|UN|N300-2|00000000):3.0\r\n",
205 "CPE210(TP-LINK|EU|N300-2|45550000):3.0\r\n"
206 "CPE210(TP-LINK|UN|N300-2|00000000):3.0\r\n"
207 "CPE210(TP-LINK|US|N300-2|55530000):3.0\r\n"
208 "CPE210(TP-LINK|UN|N300-2):3.0\r\n"
209 "CPE210(TP-LINK|EU|N300-2):3.0\r\n"
210 "CPE210(TP-LINK|EU|N300-2|45550000):3.1\r\n"
211 "CPE210(TP-LINK|UN|N300-2|00000000):3.1\r\n"
212 "CPE210(TP-LINK|US|N300-2|55530000):3.1\r\n"
213 "CPE210(TP-LINK|EU|N300-2|45550000):3.20\r\n"
214 "CPE210(TP-LINK|UN|N300-2|00000000):3.20\r\n"
215 "CPE210(TP-LINK|US|N300-2|55530000):3.20\r\n",
216 .support_trail
= '\xff',
220 {"fs-uboot", 0x00000, 0x20000},
221 {"partition-table", 0x20000, 0x01000},
222 {"default-mac", 0x30000, 0x00020},
223 {"product-info", 0x31100, 0x00100},
224 {"device-info", 0x31400, 0x00400},
225 {"signature", 0x32000, 0x00400},
226 {"device-id", 0x33000, 0x00100},
227 {"firmware", 0x40000, 0x770000},
228 {"soft-version", 0x7b0000, 0x00100},
229 {"support-list", 0x7b1000, 0x01000},
230 {"user-config", 0x7c0000, 0x10000},
231 {"default-config", 0x7d0000, 0x10000},
232 {"log", 0x7e0000, 0x10000},
233 {"radio", 0x7f0000, 0x10000},
237 .first_sysupgrade_partition
= "os-image",
238 .last_sysupgrade_partition
= "support-list",
241 /** Firmware layout for the CPE220 V2 */
244 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
247 "CPE220(TP-LINK|EU|N300-2|00000000):2.0\r\n"
248 "CPE220(TP-LINK|EU|N300-2|45550000):2.0\r\n"
249 "CPE220(TP-LINK|EU|N300-2|55530000):2.0\r\n"
250 "CPE220(TP-LINK|UN|N300-2|00000000):2.0\r\n"
251 "CPE220(TP-LINK|UN|N300-2|45550000):2.0\r\n"
252 "CPE220(TP-LINK|UN|N300-2|55530000):2.0\r\n"
253 "CPE220(TP-LINK|US|N300-2|55530000):2.0\r\n"
254 "CPE220(TP-LINK|UN|N300-2):2.0\r\n"
255 "CPE220(TP-LINK|EU|N300-2):2.0\r\n"
256 "CPE220(TP-LINK|US|N300-2):2.0\r\n",
257 .support_trail
= '\xff',
261 {"fs-uboot", 0x00000, 0x20000},
262 {"partition-table", 0x20000, 0x02000},
263 {"default-mac", 0x30000, 0x00020},
264 {"product-info", 0x31100, 0x00100},
265 {"signature", 0x32000, 0x00400},
266 {"os-image", 0x40000, 0x200000},
267 {"file-system", 0x240000, 0x570000},
268 {"soft-version", 0x7b0000, 0x00100},
269 {"support-list", 0x7b1000, 0x00400},
270 {"user-config", 0x7c0000, 0x10000},
271 {"default-config", 0x7d0000, 0x10000},
272 {"log", 0x7e0000, 0x10000},
273 {"radio", 0x7f0000, 0x10000},
277 .first_sysupgrade_partition
= "os-image",
278 .last_sysupgrade_partition
= "support-list",
281 /** Firmware layout for the CPE220 V3 */
284 .vendor
= "CPE220(TP-LINK|UN|N300-2|00000000):3.0\r\n",
287 "CPE220(TP-LINK|EU|N300-2|00000000):3.0\r\n"
288 "CPE220(TP-LINK|EU|N300-2|45550000):3.0\r\n"
289 "CPE220(TP-LINK|EU|N300-2|55530000):3.0\r\n"
290 "CPE220(TP-LINK|UN|N300-2|00000000):3.0\r\n"
291 "CPE220(TP-LINK|UN|N300-2|45550000):3.0\r\n"
292 "CPE220(TP-LINK|UN|N300-2|55530000):3.0\r\n"
293 "CPE220(TP-LINK|US|N300-2|55530000):3.0\r\n"
294 "CPE220(TP-LINK|UN|N300-2):3.0\r\n"
295 "CPE220(TP-LINK|EU|N300-2):3.0\r\n"
296 "CPE220(TP-LINK|US|N300-2):3.0\r\n",
297 .support_trail
= '\xff',
301 {"fs-uboot", 0x00000, 0x20000},
302 {"partition-table", 0x20000, 0x02000},
303 {"default-mac", 0x30000, 0x00020},
304 {"product-info", 0x31100, 0x00100},
305 {"device-info", 0x31400, 0x00400},
306 {"signature", 0x32000, 0x00400},
307 {"device-id", 0x33000, 0x00100},
308 {"firmware", 0x40000, 0x770000},
309 {"soft-version", 0x7b0000, 0x00100},
310 {"support-list", 0x7b1000, 0x01000},
311 {"user-config", 0x7c0000, 0x10000},
312 {"default-config", 0x7d0000, 0x10000},
313 {"log", 0x7e0000, 0x10000},
314 {"radio", 0x7f0000, 0x10000},
318 .first_sysupgrade_partition
= "os-image",
319 .last_sysupgrade_partition
= "support-list",
322 /** Firmware layout for the CPE510/520 V1 */
325 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
328 "CPE510(TP-LINK|UN|N300-5):1.0\r\n"
329 "CPE510(TP-LINK|UN|N300-5):1.1\r\n"
330 "CPE510(TP-LINK|UN|N300-5):1.1\r\n"
331 "CPE510(TP-LINK|US|N300-5):1.1\r\n"
332 "CPE510(TP-LINK|EU|N300-5):1.1\r\n"
333 "CPE520(TP-LINK|UN|N300-5):1.1\r\n"
334 "CPE520(TP-LINK|US|N300-5):1.1\r\n"
335 "CPE520(TP-LINK|EU|N300-5):1.1\r\n",
336 .support_trail
= '\xff',
340 {"fs-uboot", 0x00000, 0x20000},
341 {"partition-table", 0x20000, 0x02000},
342 {"default-mac", 0x30000, 0x00020},
343 {"product-info", 0x31100, 0x00100},
344 {"signature", 0x32000, 0x00400},
345 {"os-image", 0x40000, 0x200000},
346 {"file-system", 0x240000, 0x570000},
347 {"soft-version", 0x7b0000, 0x00100},
348 {"support-list", 0x7b1000, 0x00400},
349 {"user-config", 0x7c0000, 0x10000},
350 {"default-config", 0x7d0000, 0x10000},
351 {"log", 0x7e0000, 0x10000},
352 {"radio", 0x7f0000, 0x10000},
356 .first_sysupgrade_partition
= "os-image",
357 .last_sysupgrade_partition
= "support-list",
360 /** Firmware layout for the CPE510 V2 */
363 .vendor
= "CPE510(TP-LINK|UN|N300-5):2.0\r\n",
366 "CPE510(TP-LINK|EU|N300-5|00000000):2.0\r\n"
367 "CPE510(TP-LINK|EU|N300-5|45550000):2.0\r\n"
368 "CPE510(TP-LINK|EU|N300-5|55530000):2.0\r\n"
369 "CPE510(TP-LINK|UN|N300-5|00000000):2.0\r\n"
370 "CPE510(TP-LINK|UN|N300-5|45550000):2.0\r\n"
371 "CPE510(TP-LINK|UN|N300-5|55530000):2.0\r\n"
372 "CPE510(TP-LINK|US|N300-5|00000000):2.0\r\n"
373 "CPE510(TP-LINK|US|N300-5|45550000):2.0\r\n"
374 "CPE510(TP-LINK|US|N300-5|55530000):2.0\r\n"
375 "CPE510(TP-LINK|UN|N300-5):2.0\r\n"
376 "CPE510(TP-LINK|EU|N300-5):2.0\r\n"
377 "CPE510(TP-LINK|US|N300-5):2.0\r\n",
378 .support_trail
= '\xff',
382 {"fs-uboot", 0x00000, 0x20000},
383 {"partition-table", 0x20000, 0x02000},
384 {"default-mac", 0x30000, 0x00020},
385 {"product-info", 0x31100, 0x00100},
386 {"signature", 0x32000, 0x00400},
387 {"os-image", 0x40000, 0x200000},
388 {"file-system", 0x240000, 0x570000},
389 {"soft-version", 0x7b0000, 0x00100},
390 {"support-list", 0x7b1000, 0x00400},
391 {"user-config", 0x7c0000, 0x10000},
392 {"default-config", 0x7d0000, 0x10000},
393 {"log", 0x7e0000, 0x10000},
394 {"radio", 0x7f0000, 0x10000},
398 .first_sysupgrade_partition
= "os-image",
399 .last_sysupgrade_partition
= "support-list",
402 /** Firmware layout for the CPE510 V3 */
405 .vendor
= "CPE510(TP-LINK|UN|N300-5):3.0\r\n",
408 "CPE510(TP-LINK|EU|N300-5|00000000):3.0\r\n"
409 "CPE510(TP-LINK|EU|N300-5|45550000):3.0\r\n"
410 "CPE510(TP-LINK|EU|N300-5|55530000):3.0\r\n"
411 "CPE510(TP-LINK|UN|N300-5|00000000):3.0\r\n"
412 "CPE510(TP-LINK|UN|N300-5|45550000):3.0\r\n"
413 "CPE510(TP-LINK|UN|N300-5|55530000):3.0\r\n"
414 "CPE510(TP-LINK|US|N300-5|00000000):3.0\r\n"
415 "CPE510(TP-LINK|US|N300-5|45550000):3.0\r\n"
416 "CPE510(TP-LINK|US|N300-5|55530000):3.0\r\n"
417 "CPE510(TP-LINK|UN|N300-5):3.0\r\n"
418 "CPE510(TP-LINK|EU|N300-5):3.0\r\n"
419 "CPE510(TP-LINK|US|N300-5):3.0\r\n",
420 .support_trail
= '\xff',
424 {"fs-uboot", 0x00000, 0x20000},
425 {"partition-table", 0x20000, 0x02000},
426 {"default-mac", 0x30000, 0x00020},
427 {"product-info", 0x31100, 0x00100},
428 {"signature", 0x32000, 0x00400},
429 {"os-image", 0x40000, 0x200000},
430 {"file-system", 0x240000, 0x570000},
431 {"soft-version", 0x7b0000, 0x00100},
432 {"support-list", 0x7b1000, 0x00400},
433 {"user-config", 0x7c0000, 0x10000},
434 {"default-config", 0x7d0000, 0x10000},
435 {"log", 0x7e0000, 0x10000},
436 {"radio", 0x7f0000, 0x10000},
440 .first_sysupgrade_partition
= "os-image",
441 .last_sysupgrade_partition
= "support-list",
444 /** Firmware layout for the CPE610V1 */
447 .vendor
= "CPE610(TP-LINK|UN|N300-5|00000000):1.0\r\n",
450 "CPE610(TP-LINK|EU|N300-5|00000000):1.0\r\n"
451 "CPE610(TP-LINK|EU|N300-5|45550000):1.0\r\n"
452 "CPE610(TP-LINK|EU|N300-5|55530000):1.0\r\n"
453 "CPE610(TP-LINK|UN|N300-5|00000000):1.0\r\n"
454 "CPE610(TP-LINK|UN|N300-5|45550000):1.0\r\n"
455 "CPE610(TP-LINK|UN|N300-5|55530000):1.0\r\n"
456 "CPE610(TP-LINK|US|N300-5|55530000):1.0\r\n"
457 "CPE610(TP-LINK|UN|N300-5):1.0\r\n"
458 "CPE610(TP-LINK|EU|N300-5):1.0\r\n"
459 "CPE610(TP-LINK|US|N300-5):1.0\r\n",
460 .support_trail
= '\xff',
464 {"fs-uboot", 0x00000, 0x20000},
465 {"partition-table", 0x20000, 0x02000},
466 {"default-mac", 0x30000, 0x00020},
467 {"product-info", 0x31100, 0x00100},
468 {"signature", 0x32000, 0x00400},
469 {"os-image", 0x40000, 0x200000},
470 {"file-system", 0x240000, 0x570000},
471 {"soft-version", 0x7b0000, 0x00100},
472 {"support-list", 0x7b1000, 0x00400},
473 {"user-config", 0x7c0000, 0x10000},
474 {"default-config", 0x7d0000, 0x10000},
475 {"log", 0x7e0000, 0x10000},
476 {"radio", 0x7f0000, 0x10000},
480 .first_sysupgrade_partition
= "os-image",
481 .last_sysupgrade_partition
= "support-list",
484 /** Firmware layout for the CPE610V2 */
487 .vendor
= "CPE610(TP-LINK|UN|N300-5|00000000):2.0\r\n",
490 "CPE610(TP-LINK|EU|N300-5|00000000):2.0\r\n"
491 "CPE610(TP-LINK|EU|N300-5|45550000):2.0\r\n"
492 "CPE610(TP-LINK|EU|N300-5|55530000):2.0\r\n"
493 "CPE610(TP-LINK|UN|N300-5|00000000):2.0\r\n"
494 "CPE610(TP-LINK|UN|N300-5|45550000):2.0\r\n"
495 "CPE610(TP-LINK|UN|N300-5|55530000):2.0\r\n"
496 "CPE610(TP-LINK|US|N300-5|55530000):2.0\r\n"
497 "CPE610(TP-LINK|UN|N300-5):2.0\r\n"
498 "CPE610(TP-LINK|EU|N300-5):2.0\r\n"
499 "CPE610(TP-LINK|US|N300-5):2.0\r\n",
500 .support_trail
= '\xff',
504 {"fs-uboot", 0x00000, 0x20000},
505 {"partition-table", 0x20000, 0x02000},
506 {"default-mac", 0x30000, 0x00020},
507 {"product-info", 0x31100, 0x00100},
508 {"signature", 0x32000, 0x00400},
509 {"os-image", 0x40000, 0x200000},
510 {"file-system", 0x240000, 0x570000},
511 {"soft-version", 0x7b0000, 0x00100},
512 {"support-list", 0x7b1000, 0x00400},
513 {"user-config", 0x7c0000, 0x10000},
514 {"default-config", 0x7d0000, 0x10000},
515 {"log", 0x7e0000, 0x10000},
516 {"radio", 0x7f0000, 0x10000},
520 .first_sysupgrade_partition
= "os-image",
521 .last_sysupgrade_partition
= "support-list",
526 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
529 "WBS210(TP-LINK|UN|N300-2):1.20\r\n"
530 "WBS210(TP-LINK|US|N300-2):1.20\r\n"
531 "WBS210(TP-LINK|EU|N300-2):1.20\r\n",
532 .support_trail
= '\xff',
536 {"fs-uboot", 0x00000, 0x20000},
537 {"partition-table", 0x20000, 0x02000},
538 {"default-mac", 0x30000, 0x00020},
539 {"product-info", 0x31100, 0x00100},
540 {"signature", 0x32000, 0x00400},
541 {"os-image", 0x40000, 0x200000},
542 {"file-system", 0x240000, 0x570000},
543 {"soft-version", 0x7b0000, 0x00100},
544 {"support-list", 0x7b1000, 0x00400},
545 {"user-config", 0x7c0000, 0x10000},
546 {"default-config", 0x7d0000, 0x10000},
547 {"log", 0x7e0000, 0x10000},
548 {"radio", 0x7f0000, 0x10000},
552 .first_sysupgrade_partition
= "os-image",
553 .last_sysupgrade_partition
= "support-list",
558 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
561 "WBS210(TP-LINK|UN|N300-2|00000000):2.0\r\n"
562 "WBS210(TP-LINK|US|N300-2|55530000):2.0\r\n"
563 "WBS210(TP-LINK|EU|N300-2|45550000):2.0\r\n",
564 .support_trail
= '\xff',
568 {"fs-uboot", 0x00000, 0x20000},
569 {"partition-table", 0x20000, 0x02000},
570 {"default-mac", 0x30000, 0x00020},
571 {"product-info", 0x31100, 0x00100},
572 {"signature", 0x32000, 0x00400},
573 {"os-image", 0x40000, 0x200000},
574 {"file-system", 0x240000, 0x570000},
575 {"soft-version", 0x7b0000, 0x00100},
576 {"support-list", 0x7b1000, 0x00400},
577 {"user-config", 0x7c0000, 0x10000},
578 {"default-config", 0x7d0000, 0x10000},
579 {"log", 0x7e0000, 0x10000},
580 {"radio", 0x7f0000, 0x10000},
584 .first_sysupgrade_partition
= "os-image",
585 .last_sysupgrade_partition
= "support-list",
590 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
593 "WBS510(TP-LINK|UN|N300-5):1.20\r\n"
594 "WBS510(TP-LINK|US|N300-5):1.20\r\n"
595 "WBS510(TP-LINK|EU|N300-5):1.20\r\n"
596 "WBS510(TP-LINK|CA|N300-5):1.20\r\n",
597 .support_trail
= '\xff',
601 {"fs-uboot", 0x00000, 0x20000},
602 {"partition-table", 0x20000, 0x02000},
603 {"default-mac", 0x30000, 0x00020},
604 {"product-info", 0x31100, 0x00100},
605 {"signature", 0x32000, 0x00400},
606 {"os-image", 0x40000, 0x200000},
607 {"file-system", 0x240000, 0x570000},
608 {"soft-version", 0x7b0000, 0x00100},
609 {"support-list", 0x7b1000, 0x00400},
610 {"user-config", 0x7c0000, 0x10000},
611 {"default-config", 0x7d0000, 0x10000},
612 {"log", 0x7e0000, 0x10000},
613 {"radio", 0x7f0000, 0x10000},
617 .first_sysupgrade_partition
= "os-image",
618 .last_sysupgrade_partition
= "support-list",
623 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
626 "WBS510(TP-LINK|UN|N300-5|00000000):2.0\r\n"
627 "WBS510(TP-LINK|US|N300-5|55530000):2.0\r\n"
628 "WBS510(TP-LINK|EU|N300-5|45550000):2.0\r\n"
629 "WBS510(TP-LINK|CA|N300-5|43410000):2.0\r\n",
630 .support_trail
= '\xff',
634 {"fs-uboot", 0x00000, 0x20000},
635 {"partition-table", 0x20000, 0x02000},
636 {"default-mac", 0x30000, 0x00020},
637 {"product-info", 0x31100, 0x00100},
638 {"signature", 0x32000, 0x00400},
639 {"os-image", 0x40000, 0x200000},
640 {"file-system", 0x240000, 0x570000},
641 {"soft-version", 0x7b0000, 0x00100},
642 {"support-list", 0x7b1000, 0x00400},
643 {"user-config", 0x7c0000, 0x10000},
644 {"default-config", 0x7d0000, 0x10000},
645 {"log", 0x7e0000, 0x10000},
646 {"radio", 0x7f0000, 0x10000},
650 .first_sysupgrade_partition
= "os-image",
651 .last_sysupgrade_partition
= "support-list",
654 /** Firmware layout for the C2600 */
660 "{product_name:Archer C2600,product_ver:1.0.0,special_id:00000000}\r\n",
661 .support_trail
= '\x00',
665 We use a bigger os-image partition than the stock images (and thus
666 smaller file-system), as our kernel doesn't fit in the stock firmware's
667 2 MB os-image since kernel 4.14.
670 {"SBL1", 0x00000, 0x20000},
671 {"MIBIB", 0x20000, 0x20000},
672 {"SBL2", 0x40000, 0x20000},
673 {"SBL3", 0x60000, 0x30000},
674 {"DDRCONFIG", 0x90000, 0x10000},
675 {"SSD", 0xa0000, 0x10000},
676 {"TZ", 0xb0000, 0x30000},
677 {"RPM", 0xe0000, 0x20000},
678 {"fs-uboot", 0x100000, 0x70000},
679 {"uboot-env", 0x170000, 0x40000},
680 {"radio", 0x1b0000, 0x40000},
681 {"os-image", 0x1f0000, 0x400000}, /* Stock: base 0x1f0000 size 0x200000 */
682 {"file-system", 0x5f0000, 0x1900000}, /* Stock: base 0x3f0000 size 0x1b00000 */
683 {"default-mac", 0x1ef0000, 0x00200},
684 {"pin", 0x1ef0200, 0x00200},
685 {"product-info", 0x1ef0400, 0x0fc00},
686 {"partition-table", 0x1f00000, 0x10000},
687 {"soft-version", 0x1f10000, 0x10000},
688 {"support-list", 0x1f20000, 0x10000},
689 {"profile", 0x1f30000, 0x10000},
690 {"default-config", 0x1f40000, 0x10000},
691 {"user-config", 0x1f50000, 0x40000},
692 {"qos-db", 0x1f90000, 0x40000},
693 {"usb-config", 0x1fd0000, 0x10000},
694 {"log", 0x1fe0000, 0x20000},
698 .first_sysupgrade_partition
= "os-image",
699 .last_sysupgrade_partition
= "file-system"
702 /** Firmware layout for the A7-V5 */
704 .id
= "ARCHER-A7-V5",
707 "{product_name:Archer A7,product_ver:5.0.0,special_id:45550000}\n"
708 "{product_name:Archer A7,product_ver:5.0.0,special_id:55530000}\n"
709 "{product_name:Archer A7,product_ver:5.0.0,special_id:43410000}\n"
710 "{product_name:Archer A7,product_ver:5.0.0,special_id:4A500000}\n"
711 "{product_name:Archer A7,product_ver:5.0.0,special_id:54570000}\n",
712 .support_trail
= '\x00',
713 .soft_ver
= "soft_ver:1.0.0\n",
715 /* We're using a dynamic kernel/rootfs split here */
717 {"factory-boot", 0x00000, 0x20000},
718 {"fs-uboot", 0x20000, 0x20000},
719 {"firmware", 0x40000, 0xec0000}, /* Stock: name os-image base 0x40000 size 0x120000 */
720 /* Stock: name file-system base 0x160000 size 0xda0000 */
721 {"default-mac", 0xf40000, 0x00200},
722 {"pin", 0xf40200, 0x00200},
723 {"device-id", 0xf40400, 0x00100},
724 {"product-info", 0xf40500, 0x0fb00},
725 {"soft-version", 0xf50000, 0x00100},
726 {"extra-para", 0xf51000, 0x01000},
727 {"support-list", 0xf52000, 0x0a000},
728 {"profile", 0xf5c000, 0x04000},
729 {"default-config", 0xf60000, 0x10000},
730 {"user-config", 0xf70000, 0x40000},
731 {"certificate", 0xfb0000, 0x10000},
732 {"partition-table", 0xfc0000, 0x10000},
733 {"log", 0xfd0000, 0x20000},
734 {"radio", 0xff0000, 0x10000},
738 .first_sysupgrade_partition
= "os-image",
739 .last_sysupgrade_partition
= "file-system",
742 /** Firmware layout for the C2v3 */
744 .id
= "ARCHER-C2-V3",
747 "{product_name:ArcherC2,product_ver:3.0.0,special_id:00000000}\n"
748 "{product_name:ArcherC2,product_ver:3.0.0,special_id:55530000}\n"
749 "{product_name:ArcherC2,product_ver:3.0.0,special_id:45550000}\n",
750 .support_trail
= '\x00',
751 .soft_ver
= "soft_ver:3.0.1\n",
753 /** We're using a dynamic kernel/rootfs split here */
756 {"factory-boot", 0x00000, 0x20000},
757 {"fs-uboot", 0x20000, 0x10000},
758 {"firmware", 0x30000, 0x7a0000},
759 {"user-config", 0x7d0000, 0x04000},
760 {"default-mac", 0x7e0000, 0x00100},
761 {"device-id", 0x7e0100, 0x00100},
762 {"extra-para", 0x7e0200, 0x00100},
763 {"pin", 0x7e0300, 0x00100},
764 {"support-list", 0x7e0400, 0x00400},
765 {"soft-version", 0x7e0800, 0x00400},
766 {"product-info", 0x7e0c00, 0x01400},
767 {"partition-table", 0x7e2000, 0x01000},
768 {"profile", 0x7e3000, 0x01000},
769 {"default-config", 0x7e4000, 0x04000},
770 {"merge-config", 0x7ec000, 0x02000},
771 {"qos-db", 0x7ee000, 0x02000},
772 {"radio", 0x7f0000, 0x10000},
776 .first_sysupgrade_partition
= "os-image",
777 .last_sysupgrade_partition
= "file-system",
780 /** Firmware layout for the C25v1 */
782 .id
= "ARCHER-C25-V1",
785 "{product_name:ArcherC25,product_ver:1.0.0,special_id:00000000}\n"
786 "{product_name:ArcherC25,product_ver:1.0.0,special_id:55530000}\n"
787 "{product_name:ArcherC25,product_ver:1.0.0,special_id:45550000}\n",
788 .support_trail
= '\x00',
789 .soft_ver
= "soft_ver:1.0.0\n",
791 /* We're using a dynamic kernel/rootfs split here */
793 {"factory-boot", 0x00000, 0x20000},
794 {"fs-uboot", 0x20000, 0x10000},
795 {"firmware", 0x30000, 0x7a0000}, /* Stock: name os-image base 0x30000 size 0x100000 */
796 /* Stock: name file-system base 0x130000 size 0x6a0000 */
797 {"user-config", 0x7d0000, 0x04000},
798 {"default-mac", 0x7e0000, 0x00100},
799 {"device-id", 0x7e0100, 0x00100},
800 {"extra-para", 0x7e0200, 0x00100},
801 {"pin", 0x7e0300, 0x00100},
802 {"support-list", 0x7e0400, 0x00400},
803 {"soft-version", 0x7e0800, 0x00400},
804 {"product-info", 0x7e0c00, 0x01400},
805 {"partition-table", 0x7e2000, 0x01000},
806 {"profile", 0x7e3000, 0x01000},
807 {"default-config", 0x7e4000, 0x04000},
808 {"merge-config", 0x7ec000, 0x02000},
809 {"qos-db", 0x7ee000, 0x02000},
810 {"radio", 0x7f0000, 0x10000},
814 .first_sysupgrade_partition
= "os-image",
815 .last_sysupgrade_partition
= "file-system",
818 /** Firmware layout for the C58v1 */
820 .id
= "ARCHER-C58-V1",
824 "{product_name:Archer C58,product_ver:1.0.0,special_id:00000000}\r\n"
825 "{product_name:Archer C58,product_ver:1.0.0,special_id:45550000}\r\n"
826 "{product_name:Archer C58,product_ver:1.0.0,special_id:55530000}\r\n",
827 .support_trail
= '\x00',
828 .soft_ver
= "soft_ver:1.0.0\n",
831 {"fs-uboot", 0x00000, 0x10000},
832 {"default-mac", 0x10000, 0x00200},
833 {"pin", 0x10200, 0x00200},
834 {"product-info", 0x10400, 0x00100},
835 {"partition-table", 0x10500, 0x00800},
836 {"soft-version", 0x11300, 0x00200},
837 {"support-list", 0x11500, 0x00100},
838 {"device-id", 0x11600, 0x00100},
839 {"profile", 0x11700, 0x03900},
840 {"default-config", 0x15000, 0x04000},
841 {"user-config", 0x19000, 0x04000},
842 {"firmware", 0x20000, 0x7c8000},
843 {"certyficate", 0x7e8000, 0x08000},
844 {"radio", 0x7f0000, 0x10000},
848 .first_sysupgrade_partition
= "os-image",
849 .last_sysupgrade_partition
= "file-system",
852 /** Firmware layout for the C59v1 */
854 .id
= "ARCHER-C59-V1",
858 "{product_name:Archer C59,product_ver:1.0.0,special_id:00000000}\r\n"
859 "{product_name:Archer C59,product_ver:1.0.0,special_id:45550000}\r\n"
860 "{product_name:Archer C59,product_ver:1.0.0,special_id:52550000}\r\n"
861 "{product_name:Archer C59,product_ver:1.0.0,special_id:55530000}\r\n",
862 .support_trail
= '\x00',
863 .soft_ver
= "soft_ver:1.0.0\n",
865 /* We're using a dynamic kernel/rootfs split here */
867 {"fs-uboot", 0x00000, 0x10000},
868 {"default-mac", 0x10000, 0x00200},
869 {"pin", 0x10200, 0x00200},
870 {"device-id", 0x10400, 0x00100},
871 {"product-info", 0x10500, 0x0fb00},
872 {"firmware", 0x20000, 0xe30000},
873 {"partition-table", 0xe50000, 0x10000},
874 {"soft-version", 0xe60000, 0x10000},
875 {"support-list", 0xe70000, 0x10000},
876 {"profile", 0xe80000, 0x10000},
877 {"default-config", 0xe90000, 0x10000},
878 {"user-config", 0xea0000, 0x40000},
879 {"usb-config", 0xee0000, 0x10000},
880 {"certificate", 0xef0000, 0x10000},
881 {"qos-db", 0xf00000, 0x40000},
882 {"log", 0xfe0000, 0x10000},
883 {"radio", 0xff0000, 0x10000},
887 .first_sysupgrade_partition
= "os-image",
888 .last_sysupgrade_partition
= "file-system",
891 /** Firmware layout for the C59v2 */
893 .id
= "ARCHER-C59-V2",
897 "{product_name:Archer C59,product_ver:2.0.0,special_id:00000000}\r\n"
898 "{product_name:Archer C59,product_ver:2.0.0,special_id:45550000}\r\n"
899 "{product_name:Archer C59,product_ver:2.0.0,special_id:55530000}\r\n",
900 .support_trail
= '\x00',
901 .soft_ver
= "soft_ver:2.0.0 Build 20161206 rel.7303\n",
903 /** We're using a dynamic kernel/rootfs split here */
905 {"factory-boot", 0x00000, 0x20000},
906 {"fs-uboot", 0x20000, 0x10000},
907 {"default-mac", 0x30000, 0x00200},
908 {"pin", 0x30200, 0x00200},
909 {"device-id", 0x30400, 0x00100},
910 {"product-info", 0x30500, 0x0fb00},
911 {"firmware", 0x40000, 0xe10000},
912 {"partition-table", 0xe50000, 0x10000},
913 {"soft-version", 0xe60000, 0x10000},
914 {"support-list", 0xe70000, 0x10000},
915 {"profile", 0xe80000, 0x10000},
916 {"default-config", 0xe90000, 0x10000},
917 {"user-config", 0xea0000, 0x40000},
918 {"usb-config", 0xee0000, 0x10000},
919 {"certificate", 0xef0000, 0x10000},
920 {"extra-para", 0xf00000, 0x10000},
921 {"qos-db", 0xf10000, 0x30000},
922 {"log", 0xfe0000, 0x10000},
923 {"radio", 0xff0000, 0x10000},
927 .first_sysupgrade_partition
= "os-image",
928 .last_sysupgrade_partition
= "file-system",
931 /** Firmware layout for the Archer C6 v2 (EU/RU/JP) */
933 .id
= "ARCHER-C6-V2",
937 "{product_name:Archer C6,product_ver:2.0.0,special_id:45550000}\r\n"
938 "{product_name:Archer C6,product_ver:2.0.0,special_id:52550000}\r\n"
939 "{product_name:Archer C6,product_ver:2.0.0,special_id:4A500000}\r\n",
940 .support_trail
= '\x00',
941 .soft_ver
= "soft_ver:1.2.1\n",
944 {"fs-uboot", 0x00000, 0x20000},
945 {"default-mac", 0x20000, 0x00200},
946 {"pin", 0x20200, 0x00100},
947 {"product-info", 0x20300, 0x00200},
948 {"device-id", 0x20500, 0x0fb00},
949 {"firmware", 0x30000, 0x7a9400},
950 {"soft-version", 0x7d9400, 0x00100},
951 {"extra-para", 0x7d9500, 0x00100},
952 {"support-list", 0x7d9600, 0x00200},
953 {"profile", 0x7d9800, 0x03000},
954 {"default-config", 0x7dc800, 0x03000},
955 {"partition-table", 0x7df800, 0x00800},
956 {"user-config", 0x7e0000, 0x0c000},
957 {"certificate", 0x7ec000, 0x04000},
958 {"radio", 0x7f0000, 0x10000},
962 .first_sysupgrade_partition
= "os-image",
963 .last_sysupgrade_partition
= "file-system",
966 /** Firmware layout for the Archer C6 v2 (US) and A6 v2 (US/TW) */
968 .id
= "ARCHER-C6-V2-US",
972 "{product_name:Archer A6,product_ver:2.0.0,special_id:55530000}\n"
973 "{product_name:Archer A6,product_ver:2.0.0,special_id:54570000}\n"
974 "{product_name:Archer C6,product_ver:2.0.0,special_id:55530000}\n",
975 .support_trail
= '\x00',
976 .soft_ver
= "soft_ver:1.1.1\n",
979 {"factory-boot", 0x00000, 0x20000},
980 {"default-mac", 0x20000, 0x00200},
981 {"pin", 0x20200, 0x00100},
982 {"product-info", 0x20300, 0x00200},
983 {"device-id", 0x20500, 0x0fb00},
984 {"fs-uboot", 0x30000, 0x20000},
985 {"firmware", 0x50000, 0xf89400},
986 {"soft-version", 0xfd9400, 0x00100},
987 {"extra-para", 0xfd9500, 0x00100},
988 {"support-list", 0xfd9600, 0x00200},
989 {"profile", 0xfd9800, 0x03000},
990 {"default-config", 0xfdc800, 0x03000},
991 {"partition-table", 0xfdf800, 0x00800},
992 {"user-config", 0xfe0000, 0x0c000},
993 {"certificate", 0xfec000, 0x04000},
994 {"radio", 0xff0000, 0x10000},
997 .first_sysupgrade_partition
= "os-image",
998 .last_sysupgrade_partition
= "file-system",
1001 /** Firmware layout for the C60v1 */
1003 .id
= "ARCHER-C60-V1",
1007 "{product_name:Archer C60,product_ver:1.0.0,special_id:00000000}\r\n"
1008 "{product_name:Archer C60,product_ver:1.0.0,special_id:45550000}\r\n"
1009 "{product_name:Archer C60,product_ver:1.0.0,special_id:55530000}\r\n",
1010 .support_trail
= '\x00',
1011 .soft_ver
= "soft_ver:1.0.0\n",
1014 {"fs-uboot", 0x00000, 0x10000},
1015 {"default-mac", 0x10000, 0x00200},
1016 {"pin", 0x10200, 0x00200},
1017 {"product-info", 0x10400, 0x00100},
1018 {"partition-table", 0x10500, 0x00800},
1019 {"soft-version", 0x11300, 0x00200},
1020 {"support-list", 0x11500, 0x00100},
1021 {"device-id", 0x11600, 0x00100},
1022 {"profile", 0x11700, 0x03900},
1023 {"default-config", 0x15000, 0x04000},
1024 {"user-config", 0x19000, 0x04000},
1025 {"firmware", 0x20000, 0x7c8000},
1026 {"certyficate", 0x7e8000, 0x08000},
1027 {"radio", 0x7f0000, 0x10000},
1031 .first_sysupgrade_partition
= "os-image",
1032 .last_sysupgrade_partition
= "file-system",
1035 /** Firmware layout for the C60v2 */
1037 .id
= "ARCHER-C60-V2",
1041 "{product_name:Archer C60,product_ver:2.0.0,special_id:42520000}\r\n"
1042 "{product_name:Archer C60,product_ver:2.0.0,special_id:45550000}\r\n"
1043 "{product_name:Archer C60,product_ver:2.0.0,special_id:55530000}\r\n",
1044 .support_trail
= '\x00',
1045 .soft_ver
= "soft_ver:2.0.0\n",
1048 {"factory-boot", 0x00000, 0x1fb00},
1049 {"default-mac", 0x1fb00, 0x00200},
1050 {"pin", 0x1fd00, 0x00100},
1051 {"product-info", 0x1fe00, 0x00100},
1052 {"device-id", 0x1ff00, 0x00100},
1053 {"fs-uboot", 0x20000, 0x10000},
1054 {"firmware", 0x30000, 0x7a0000},
1055 {"soft-version", 0x7d9500, 0x00100},
1056 {"support-list", 0x7d9600, 0x00100},
1057 {"extra-para", 0x7d9700, 0x00100},
1058 {"profile", 0x7d9800, 0x03000},
1059 {"default-config", 0x7dc800, 0x03000},
1060 {"partition-table", 0x7df800, 0x00800},
1061 {"user-config", 0x7e0000, 0x0c000},
1062 {"certificate", 0x7ec000, 0x04000},
1063 {"radio", 0x7f0000, 0x10000},
1067 .first_sysupgrade_partition
= "os-image",
1068 .last_sysupgrade_partition
= "file-system",
1071 /** Firmware layout for the C60v3 */
1073 .id
= "ARCHER-C60-V3",
1077 "{product_name:Archer C60,product_ver:3.0.0,special_id:42520000}\r\n"
1078 "{product_name:Archer C60,product_ver:3.0.0,special_id:45550000}\r\n"
1079 "{product_name:Archer C60,product_ver:3.0.0,special_id:55530000}\r\n",
1080 .support_trail
= '\x00',
1081 .soft_ver
= "soft_ver:3.0.0\n",
1084 {"factory-boot", 0x00000, 0x1fb00},
1085 {"default-mac", 0x1fb00, 0x00200},
1086 {"pin", 0x1fd00, 0x00100},
1087 {"product-info", 0x1fe00, 0x00100},
1088 {"device-id", 0x1ff00, 0x00100},
1089 {"fs-uboot", 0x20000, 0x10000},
1090 {"firmware", 0x30000, 0x7a0000},
1091 {"soft-version", 0x7d9500, 0x00100},
1092 {"support-list", 0x7d9600, 0x00100},
1093 {"extra-para", 0x7d9700, 0x00100},
1094 {"profile", 0x7d9800, 0x03000},
1095 {"default-config", 0x7dc800, 0x03000},
1096 {"partition-table", 0x7df800, 0x00800},
1097 {"user-config", 0x7e0000, 0x0c000},
1098 {"certificate", 0x7ec000, 0x04000},
1099 {"radio", 0x7f0000, 0x10000},
1103 .first_sysupgrade_partition
= "os-image",
1104 .last_sysupgrade_partition
= "file-system",
1107 /** Firmware layout for the C5 */
1109 .id
= "ARCHER-C5-V2",
1113 "{product_name:ArcherC5,product_ver:2.0.0,special_id:00000000}\r\n"
1114 "{product_name:ArcherC5,product_ver:2.0.0,special_id:55530000}\r\n"
1115 "{product_name:ArcherC5,product_ver:2.0.0,special_id:4A500000}\r\n", /* JP version */
1116 .support_trail
= '\x00',
1120 {"fs-uboot", 0x00000, 0x40000},
1121 {"os-image", 0x40000, 0x200000},
1122 {"file-system", 0x240000, 0xc00000},
1123 {"default-mac", 0xe40000, 0x00200},
1124 {"pin", 0xe40200, 0x00200},
1125 {"product-info", 0xe40400, 0x00200},
1126 {"partition-table", 0xe50000, 0x10000},
1127 {"soft-version", 0xe60000, 0x00200},
1128 {"support-list", 0xe61000, 0x0f000},
1129 {"profile", 0xe70000, 0x10000},
1130 {"default-config", 0xe80000, 0x10000},
1131 {"user-config", 0xe90000, 0x50000},
1132 {"log", 0xee0000, 0x100000},
1133 {"radio_bk", 0xfe0000, 0x10000},
1134 {"radio", 0xff0000, 0x10000},
1138 .first_sysupgrade_partition
= "os-image",
1139 .last_sysupgrade_partition
= "file-system"
1142 /** Firmware layout for the C7 */
1144 .id
= "ARCHER-C7-V4",
1147 "{product_name:Archer C7,product_ver:4.0.0,special_id:00000000}\n"
1148 "{product_name:Archer C7,product_ver:4.0.0,special_id:41550000}\n"
1149 "{product_name:Archer C7,product_ver:4.0.0,special_id:45550000}\n"
1150 "{product_name:Archer C7,product_ver:4.0.0,special_id:4B520000}\n"
1151 "{product_name:Archer C7,product_ver:4.0.0,special_id:42520000}\n"
1152 "{product_name:Archer C7,product_ver:4.0.0,special_id:4A500000}\n"
1153 "{product_name:Archer C7,product_ver:4.0.0,special_id:52550000}\n"
1154 "{product_name:Archer C7,product_ver:4.0.0,special_id:54570000}\n"
1155 "{product_name:Archer C7,product_ver:4.0.0,special_id:55530000}\n"
1156 "{product_name:Archer C7,product_ver:4.0.0,special_id:43410000}\n",
1157 .support_trail
= '\x00',
1158 .soft_ver
= "soft_ver:1.0.0\n",
1160 /* We're using a dynamic kernel/rootfs split here */
1162 {"factory-boot", 0x00000, 0x20000},
1163 {"fs-uboot", 0x20000, 0x20000},
1164 {"firmware", 0x40000, 0xEC0000}, /* Stock: name os-image base 0x40000 size 0x120000 */
1165 /* Stock: name file-system base 0x160000 size 0xda0000 */
1166 {"default-mac", 0xf00000, 0x00200},
1167 {"pin", 0xf00200, 0x00200},
1168 {"device-id", 0xf00400, 0x00100},
1169 {"product-info", 0xf00500, 0x0fb00},
1170 {"soft-version", 0xf10000, 0x00100},
1171 {"extra-para", 0xf11000, 0x01000},
1172 {"support-list", 0xf12000, 0x0a000},
1173 {"profile", 0xf1c000, 0x04000},
1174 {"default-config", 0xf20000, 0x10000},
1175 {"user-config", 0xf30000, 0x40000},
1176 {"qos-db", 0xf70000, 0x40000},
1177 {"certificate", 0xfb0000, 0x10000},
1178 {"partition-table", 0xfc0000, 0x10000},
1179 {"log", 0xfd0000, 0x20000},
1180 {"radio", 0xff0000, 0x10000},
1184 .first_sysupgrade_partition
= "os-image",
1185 .last_sysupgrade_partition
= "file-system",
1188 /** Firmware layout for the C7 v5*/
1190 .id
= "ARCHER-C7-V5",
1193 "{product_name:Archer C7,product_ver:5.0.0,special_id:00000000}\n"
1194 "{product_name:Archer C7,product_ver:5.0.0,special_id:45550000}\n"
1195 "{product_name:Archer C7,product_ver:5.0.0,special_id:55530000}\n"
1196 "{product_name:Archer C7,product_ver:5.0.0,special_id:43410000}\n"
1197 "{product_name:Archer C7,product_ver:5.0.0,special_id:4A500000}\n"
1198 "{product_name:Archer C7,product_ver:5.0.0,special_id:54570000}\n"
1199 "{product_name:Archer C7,product_ver:5.0.0,special_id:52550000}\n"
1200 "{product_name:Archer C7,product_ver:5.0.0,special_id:4B520000}\n",
1202 .support_trail
= '\x00',
1203 .soft_ver
= "soft_ver:1.0.0\n",
1205 /* We're using a dynamic kernel/rootfs split here */
1207 {"factory-boot", 0x00000, 0x20000},
1208 {"fs-uboot", 0x20000, 0x20000},
1209 {"partition-table", 0x40000, 0x10000},
1210 {"radio", 0x50000, 0x10000},
1211 {"default-mac", 0x60000, 0x00200},
1212 {"pin", 0x60200, 0x00200},
1213 {"device-id", 0x60400, 0x00100},
1214 {"product-info", 0x60500, 0x0fb00},
1215 {"soft-version", 0x70000, 0x01000},
1216 {"extra-para", 0x71000, 0x01000},
1217 {"support-list", 0x72000, 0x0a000},
1218 {"profile", 0x7c000, 0x04000},
1219 {"user-config", 0x80000, 0x40000},
1222 {"firmware", 0xc0000, 0xf00000}, /* Stock: name os-image base 0xc0000 size 0x120000 */
1223 /* Stock: name file-system base 0x1e0000 size 0xde0000 */
1225 {"log", 0xfc0000, 0x20000},
1226 {"certificate", 0xfe0000, 0x10000},
1227 {"default-config", 0xff0000, 0x10000},
1232 .first_sysupgrade_partition
= "os-image",
1233 .last_sysupgrade_partition
= "file-system",
1236 /** Firmware layout for the C9 */
1242 "{product_name:ArcherC9,"
1243 "product_ver:1.0.0,"
1244 "special_id:00000000}\n",
1245 .support_trail
= '\x00',
1249 {"fs-uboot", 0x00000, 0x40000},
1250 {"os-image", 0x40000, 0x200000},
1251 {"file-system", 0x240000, 0xc00000},
1252 {"default-mac", 0xe40000, 0x00200},
1253 {"pin", 0xe40200, 0x00200},
1254 {"product-info", 0xe40400, 0x00200},
1255 {"partition-table", 0xe50000, 0x10000},
1256 {"soft-version", 0xe60000, 0x00200},
1257 {"support-list", 0xe61000, 0x0f000},
1258 {"profile", 0xe70000, 0x10000},
1259 {"default-config", 0xe80000, 0x10000},
1260 {"user-config", 0xe90000, 0x50000},
1261 {"log", 0xee0000, 0x100000},
1262 {"radio_bk", 0xfe0000, 0x10000},
1263 {"radio", 0xff0000, 0x10000},
1267 .first_sysupgrade_partition
= "os-image",
1268 .last_sysupgrade_partition
= "file-system"
1271 /** Firmware layout for the EAP120 */
1274 .vendor
= "EAP120(TP-LINK|UN|N300-2):1.0\r\n",
1277 "EAP120(TP-LINK|UN|N300-2):1.0\r\n",
1278 .support_trail
= '\xff',
1282 {"fs-uboot", 0x00000, 0x20000},
1283 {"partition-table", 0x20000, 0x02000},
1284 {"default-mac", 0x30000, 0x00020},
1285 {"support-list", 0x31000, 0x00100},
1286 {"product-info", 0x31100, 0x00100},
1287 {"soft-version", 0x32000, 0x00100},
1288 {"os-image", 0x40000, 0x180000},
1289 {"file-system", 0x1c0000, 0x600000},
1290 {"user-config", 0x7c0000, 0x10000},
1291 {"backup-config", 0x7d0000, 0x10000},
1292 {"log", 0x7e0000, 0x10000},
1293 {"radio", 0x7f0000, 0x10000},
1297 .first_sysupgrade_partition
= "os-image",
1298 .last_sysupgrade_partition
= "file-system"
1301 /** Firmware layout for the TL-WA850RE v2 */
1303 .id
= "TLWA850REV2",
1307 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:55530000}\n"
1308 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:00000000}\n"
1309 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:55534100}\n"
1310 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:45550000}\n"
1311 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:4B520000}\n"
1312 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:42520000}\n"
1313 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:4A500000}\n"
1314 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:43410000}\n"
1315 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:41550000}\n"
1316 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:52550000}\n",
1317 .support_trail
= '\x00',
1321 576KB were moved from file-system to os-image
1322 in comparison to the stock image
1325 {"fs-uboot", 0x00000, 0x20000},
1326 {"firmware", 0x20000, 0x390000},
1327 {"partition-table", 0x3b0000, 0x02000},
1328 {"default-mac", 0x3c0000, 0x00020},
1329 {"pin", 0x3c0100, 0x00020},
1330 {"product-info", 0x3c1000, 0x01000},
1331 {"soft-version", 0x3c2000, 0x00100},
1332 {"support-list", 0x3c3000, 0x01000},
1333 {"profile", 0x3c4000, 0x08000},
1334 {"user-config", 0x3d0000, 0x10000},
1335 {"default-config", 0x3e0000, 0x10000},
1336 {"radio", 0x3f0000, 0x10000},
1340 .first_sysupgrade_partition
= "os-image",
1341 .last_sysupgrade_partition
= "file-system"
1344 /** Firmware layout for the TL-WA855RE v1 */
1346 .id
= "TLWA855REV1",
1350 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:00000000}\n"
1351 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:55530000}\n"
1352 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:45550000}\n"
1353 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:4B520000}\n"
1354 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:42520000}\n"
1355 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:4A500000}\n"
1356 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:43410000}\n"
1357 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:41550000}\n"
1358 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:52550000}\n",
1359 .support_trail
= '\x00',
1363 {"fs-uboot", 0x00000, 0x20000},
1364 {"os-image", 0x20000, 0x150000},
1365 {"file-system", 0x170000, 0x240000},
1366 {"partition-table", 0x3b0000, 0x02000},
1367 {"default-mac", 0x3c0000, 0x00020},
1368 {"pin", 0x3c0100, 0x00020},
1369 {"product-info", 0x3c1000, 0x01000},
1370 {"soft-version", 0x3c2000, 0x00100},
1371 {"support-list", 0x3c3000, 0x01000},
1372 {"profile", 0x3c4000, 0x08000},
1373 {"user-config", 0x3d0000, 0x10000},
1374 {"default-config", 0x3e0000, 0x10000},
1375 {"radio", 0x3f0000, 0x10000},
1379 .first_sysupgrade_partition
= "os-image",
1380 .last_sysupgrade_partition
= "file-system"
1383 /** Firmware layout for the TL-WPA8630P v2 (EU)*/
1385 .id
= "TL-WPA8630P-V2-EU",
1389 "{product_name:TL-WPA8630P,product_ver:2.0.0,special_id:45550000}\n",
1390 .support_trail
= '\x00',
1394 {"factory-uboot", 0x00000, 0x20000},
1395 {"fs-uboot", 0x20000, 0x20000},
1396 {"firmware", 0x40000, 0x5e0000},
1397 {"partition-table", 0x620000, 0x02000},
1398 {"default-mac", 0x630000, 0x00020},
1399 {"pin", 0x630100, 0x00020},
1400 {"device-id", 0x630200, 0x00030},
1401 {"product-info", 0x631100, 0x01000},
1402 {"extra-para", 0x632100, 0x01000},
1403 {"soft-version", 0x640000, 0x01000},
1404 {"support-list", 0x641000, 0x01000},
1405 {"profile", 0x642000, 0x08000},
1406 {"user-config", 0x650000, 0x10000},
1407 {"default-config", 0x660000, 0x10000},
1408 {"default-nvm", 0x670000, 0xc0000},
1409 {"default-pib", 0x730000, 0x40000},
1410 {"radio", 0x7f0000, 0x10000},
1414 .first_sysupgrade_partition
= "os-image",
1415 .last_sysupgrade_partition
= "file-system"
1418 /** Firmware layout for the TL-WPA8630P v2 (INT)*/
1420 .id
= "TL-WPA8630P-V2-INT",
1424 "{product_name:TL-WPA8630P,product_ver:2.0.0,special_id:41550000}\n"
1425 "{product_name:TL-WPA8630P,product_ver:2.0.0,special_id:44450000}\n"
1426 "{product_name:TL-WPA8630P,product_ver:2.1.0,special_id:41550000}\n",
1427 .support_trail
= '\x00',
1431 {"factory-uboot", 0x00000, 0x20000},
1432 {"fs-uboot", 0x20000, 0x20000},
1433 {"firmware", 0x40000, 0x5e0000},
1434 {"partition-table", 0x620000, 0x02000},
1435 {"extra-para", 0x632100, 0x01000},
1436 {"soft-version", 0x640000, 0x01000},
1437 {"support-list", 0x641000, 0x01000},
1438 {"profile", 0x642000, 0x08000},
1439 {"user-config", 0x650000, 0x10000},
1440 {"default-config", 0x660000, 0x10000},
1441 {"default-nvm", 0x670000, 0xc0000},
1442 {"default-pib", 0x730000, 0x40000},
1443 {"default-mac", 0x7e0000, 0x00020},
1444 {"pin", 0x7e0100, 0x00020},
1445 {"device-id", 0x7e0200, 0x00030},
1446 {"product-info", 0x7e1100, 0x01000},
1447 {"radio", 0x7f0000, 0x10000},
1451 .first_sysupgrade_partition
= "os-image",
1452 .last_sysupgrade_partition
= "file-system"
1455 /** Firmware layout for the TL-WR1043 v5 */
1457 .id
= "TLWR1043NV5",
1461 "{product_name:TL-WR1043N,product_ver:5.0.0,special_id:45550000}\n"
1462 "{product_name:TL-WR1043N,product_ver:5.0.0,special_id:55530000}\n",
1463 .support_trail
= '\x00',
1464 .soft_ver
= "soft_ver:1.0.0\n",
1466 {"factory-boot", 0x00000, 0x20000},
1467 {"fs-uboot", 0x20000, 0x20000},
1468 {"firmware", 0x40000, 0xec0000},
1469 {"default-mac", 0xf00000, 0x00200},
1470 {"pin", 0xf00200, 0x00200},
1471 {"device-id", 0xf00400, 0x00100},
1472 {"product-info", 0xf00500, 0x0fb00},
1473 {"soft-version", 0xf10000, 0x01000},
1474 {"extra-para", 0xf11000, 0x01000},
1475 {"support-list", 0xf12000, 0x0a000},
1476 {"profile", 0xf1c000, 0x04000},
1477 {"default-config", 0xf20000, 0x10000},
1478 {"user-config", 0xf30000, 0x40000},
1479 {"qos-db", 0xf70000, 0x40000},
1480 {"certificate", 0xfb0000, 0x10000},
1481 {"partition-table", 0xfc0000, 0x10000},
1482 {"log", 0xfd0000, 0x20000},
1483 {"radio", 0xff0000, 0x10000},
1486 .first_sysupgrade_partition
= "os-image",
1487 .last_sysupgrade_partition
= "file-system"
1490 /** Firmware layout for the TL-WR1043 v4 */
1492 .id
= "TLWR1043NDV4",
1496 "{product_name:TL-WR1043ND,product_ver:4.0.0,special_id:45550000}\n",
1497 .support_trail
= '\x00',
1500 /* We're using a dynamic kernel/rootfs split here */
1502 {"fs-uboot", 0x00000, 0x20000},
1503 {"firmware", 0x20000, 0xf30000},
1504 {"default-mac", 0xf50000, 0x00200},
1505 {"pin", 0xf50200, 0x00200},
1506 {"product-info", 0xf50400, 0x0fc00},
1507 {"soft-version", 0xf60000, 0x0b000},
1508 {"support-list", 0xf6b000, 0x04000},
1509 {"profile", 0xf70000, 0x04000},
1510 {"default-config", 0xf74000, 0x0b000},
1511 {"user-config", 0xf80000, 0x40000},
1512 {"partition-table", 0xfc0000, 0x10000},
1513 {"log", 0xfd0000, 0x20000},
1514 {"radio", 0xff0000, 0x10000},
1518 .first_sysupgrade_partition
= "os-image",
1519 .last_sysupgrade_partition
= "file-system"
1522 /** Firmware layout for the TL-WR902AC v1 */
1524 .id
= "TL-WR902AC-V1",
1528 "{product_name:TL-WR902AC,product_ver:1.0.0,special_id:45550000}\n"
1529 "{product_name:TL-WR902AC,product_ver:1.0.0,special_id:55530000}\n",
1530 .support_trail
= '\x00',
1534 384KB were moved from file-system to os-image
1535 in comparison to the stock image
1538 {"fs-uboot", 0x00000, 0x20000},
1539 {"firmware", 0x20000, 0x730000},
1540 {"default-mac", 0x750000, 0x00200},
1541 {"pin", 0x750200, 0x00200},
1542 {"product-info", 0x750400, 0x0fc00},
1543 {"soft-version", 0x760000, 0x0b000},
1544 {"support-list", 0x76b000, 0x04000},
1545 {"profile", 0x770000, 0x04000},
1546 {"default-config", 0x774000, 0x0b000},
1547 {"user-config", 0x780000, 0x40000},
1548 {"partition-table", 0x7c0000, 0x10000},
1549 {"log", 0x7d0000, 0x20000},
1550 {"radio", 0x7f0000, 0x10000},
1554 .first_sysupgrade_partition
= "os-image",
1555 .last_sysupgrade_partition
= "file-system",
1558 /** Firmware layout for the TL-WR942N V1 */
1564 "{product_name:TL-WR942N,product_ver:1.0.0,special_id:00000000}\r\n"
1565 "{product_name:TL-WR942N,product_ver:1.0.0,special_id:52550000}\r\n",
1566 .support_trail
= '\x00',
1570 {"fs-uboot", 0x00000, 0x20000},
1571 {"firmware", 0x20000, 0xe20000},
1572 {"default-mac", 0xe40000, 0x00200},
1573 {"pin", 0xe40200, 0x00200},
1574 {"product-info", 0xe40400, 0x0fc00},
1575 {"partition-table", 0xe50000, 0x10000},
1576 {"soft-version", 0xe60000, 0x10000},
1577 {"support-list", 0xe70000, 0x10000},
1578 {"profile", 0xe80000, 0x10000},
1579 {"default-config", 0xe90000, 0x10000},
1580 {"user-config", 0xea0000, 0x40000},
1581 {"qos-db", 0xee0000, 0x40000},
1582 {"certificate", 0xf20000, 0x10000},
1583 {"usb-config", 0xfb0000, 0x10000},
1584 {"log", 0xfc0000, 0x20000},
1585 {"radio-bk", 0xfe0000, 0x10000},
1586 {"radio", 0xff0000, 0x10000},
1590 .first_sysupgrade_partition
= "os-image",
1591 .last_sysupgrade_partition
= "file-system",
1594 /** Firmware layout for the RE200 v2 */
1600 "{product_name:RE200,product_ver:2.0.0,special_id:00000000}\n"
1601 "{product_name:RE200,product_ver:2.0.0,special_id:41520000}\n"
1602 "{product_name:RE200,product_ver:2.0.0,special_id:41550000}\n"
1603 "{product_name:RE200,product_ver:2.0.0,special_id:42520000}\n"
1604 "{product_name:RE200,product_ver:2.0.0,special_id:43410000}\n"
1605 "{product_name:RE200,product_ver:2.0.0,special_id:45530000}\n"
1606 "{product_name:RE200,product_ver:2.0.0,special_id:45550000}\n"
1607 "{product_name:RE200,product_ver:2.0.0,special_id:49440000}\n"
1608 "{product_name:RE200,product_ver:2.0.0,special_id:4a500000}\n"
1609 "{product_name:RE200,product_ver:2.0.0,special_id:4b520000}\n"
1610 "{product_name:RE200,product_ver:2.0.0,special_id:52550000}\n"
1611 "{product_name:RE200,product_ver:2.0.0,special_id:54570000}\n"
1612 "{product_name:RE200,product_ver:2.0.0,special_id:55530000}\n",
1613 .support_trail
= '\x00',
1617 {"fs-uboot", 0x00000, 0x20000},
1618 {"firmware", 0x20000, 0x7a0000},
1619 {"partition-table", 0x7c0000, 0x02000},
1620 {"default-mac", 0x7c2000, 0x00020},
1621 {"pin", 0x7c2100, 0x00020},
1622 {"product-info", 0x7c3100, 0x01000},
1623 {"soft-version", 0x7c4200, 0x01000},
1624 {"support-list", 0x7c5200, 0x01000},
1625 {"profile", 0x7c6200, 0x08000},
1626 {"config-info", 0x7ce200, 0x00400},
1627 {"user-config", 0x7d0000, 0x10000},
1628 {"default-config", 0x7e0000, 0x10000},
1629 {"radio", 0x7f0000, 0x10000},
1633 .first_sysupgrade_partition
= "os-image",
1634 .last_sysupgrade_partition
= "file-system"
1637 /** Firmware layout for the RE200 v3 */
1643 "{product_name:RE200,product_ver:3.0.0,special_id:00000000}\n"
1644 "{product_name:RE200,product_ver:3.0.0,special_id:41520000}\n"
1645 "{product_name:RE200,product_ver:3.0.0,special_id:41550000}\n"
1646 "{product_name:RE200,product_ver:3.0.0,special_id:42520000}\n"
1647 "{product_name:RE200,product_ver:3.0.0,special_id:43410000}\n"
1648 "{product_name:RE200,product_ver:3.0.0,special_id:45470000}\n"
1649 "{product_name:RE200,product_ver:3.0.0,special_id:45530000}\n"
1650 "{product_name:RE200,product_ver:3.0.0,special_id:45550000}\n"
1651 "{product_name:RE200,product_ver:3.0.0,special_id:49440000}\n"
1652 "{product_name:RE200,product_ver:3.0.0,special_id:4A500000}\n"
1653 "{product_name:RE200,product_ver:3.0.0,special_id:4B520000}\n"
1654 "{product_name:RE200,product_ver:3.0.0,special_id:52550000}\n"
1655 "{product_name:RE200,product_ver:3.0.0,special_id:54570000}\n"
1656 "{product_name:RE200,product_ver:3.0.0,special_id:55530000}\n",
1657 .support_trail
= '\x00',
1661 {"fs-uboot", 0x00000, 0x20000},
1662 {"firmware", 0x20000, 0x7a0000},
1663 {"partition-table", 0x7c0000, 0x02000},
1664 {"default-mac", 0x7c2000, 0x00020},
1665 {"pin", 0x7c2100, 0x00020},
1666 {"product-info", 0x7c3100, 0x01000},
1667 {"soft-version", 0x7c4200, 0x01000},
1668 {"support-list", 0x7c5200, 0x01000},
1669 {"profile", 0x7c6200, 0x08000},
1670 {"config-info", 0x7ce200, 0x00400},
1671 {"user-config", 0x7d0000, 0x10000},
1672 {"default-config", 0x7e0000, 0x10000},
1673 {"radio", 0x7f0000, 0x10000},
1677 .first_sysupgrade_partition
= "os-image",
1678 .last_sysupgrade_partition
= "file-system"
1681 /** Firmware layout for the RE220 v2 */
1687 "{product_name:RE220,product_ver:2.0.0,special_id:00000000}\n"
1688 "{product_name:RE220,product_ver:2.0.0,special_id:41520000}\n"
1689 "{product_name:RE220,product_ver:2.0.0,special_id:41550000}\n"
1690 "{product_name:RE220,product_ver:2.0.0,special_id:42520000}\n"
1691 "{product_name:RE220,product_ver:2.0.0,special_id:43410000}\n"
1692 "{product_name:RE220,product_ver:2.0.0,special_id:45530000}\n"
1693 "{product_name:RE220,product_ver:2.0.0,special_id:45550000}\n"
1694 "{product_name:RE220,product_ver:2.0.0,special_id:49440000}\n"
1695 "{product_name:RE220,product_ver:2.0.0,special_id:4a500000}\n"
1696 "{product_name:RE220,product_ver:2.0.0,special_id:4b520000}\n"
1697 "{product_name:RE220,product_ver:2.0.0,special_id:52550000}\n"
1698 "{product_name:RE220,product_ver:2.0.0,special_id:54570000}\n"
1699 "{product_name:RE220,product_ver:2.0.0,special_id:55530000}\n",
1700 .support_trail
= '\x00',
1704 {"fs-uboot", 0x00000, 0x20000},
1705 {"firmware", 0x20000, 0x7a0000},
1706 {"partition-table", 0x7c0000, 0x02000},
1707 {"default-mac", 0x7c2000, 0x00020},
1708 {"pin", 0x7c2100, 0x00020},
1709 {"product-info", 0x7c3100, 0x01000},
1710 {"soft-version", 0x7c4200, 0x01000},
1711 {"support-list", 0x7c5200, 0x01000},
1712 {"profile", 0x7c6200, 0x08000},
1713 {"config-info", 0x7ce200, 0x00400},
1714 {"user-config", 0x7d0000, 0x10000},
1715 {"default-config", 0x7e0000, 0x10000},
1716 {"radio", 0x7f0000, 0x10000},
1720 .first_sysupgrade_partition
= "os-image",
1721 .last_sysupgrade_partition
= "file-system"
1724 /** Firmware layout for the RE305 v1 */
1730 "{product_name:RE305,product_ver:1.0.0,special_id:45550000}\n"
1731 "{product_name:RE305,product_ver:1.0.0,special_id:55530000}\n"
1732 "{product_name:RE305,product_ver:1.0.0,special_id:4a500000}\n"
1733 "{product_name:RE305,product_ver:1.0.0,special_id:42520000}\n"
1734 "{product_name:RE305,product_ver:1.0.0,special_id:4b520000}\n"
1735 "{product_name:RE305,product_ver:1.0.0,special_id:41550000}\n"
1736 "{product_name:RE305,product_ver:1.0.0,special_id:43410000}\n",
1737 .support_trail
= '\x00',
1741 {"fs-uboot", 0x00000, 0x20000},
1742 {"firmware", 0x20000, 0x5e0000},
1743 {"partition-table", 0x600000, 0x02000},
1744 {"default-mac", 0x610000, 0x00020},
1745 {"pin", 0x610100, 0x00020},
1746 {"product-info", 0x611100, 0x01000},
1747 {"soft-version", 0x620000, 0x01000},
1748 {"support-list", 0x621000, 0x01000},
1749 {"profile", 0x622000, 0x08000},
1750 {"user-config", 0x630000, 0x10000},
1751 {"default-config", 0x640000, 0x10000},
1752 {"radio", 0x7f0000, 0x10000},
1756 .first_sysupgrade_partition
= "os-image",
1757 .last_sysupgrade_partition
= "file-system"
1760 /** Firmware layout for the RE350 v1 */
1766 "{product_name:RE350,product_ver:1.0.0,special_id:45550000}\n"
1767 "{product_name:RE350,product_ver:1.0.0,special_id:00000000}\n"
1768 "{product_name:RE350,product_ver:1.0.0,special_id:41550000}\n"
1769 "{product_name:RE350,product_ver:1.0.0,special_id:55530000}\n"
1770 "{product_name:RE350,product_ver:1.0.0,special_id:43410000}\n"
1771 "{product_name:RE350,product_ver:1.0.0,special_id:4b520000}\n"
1772 "{product_name:RE350,product_ver:1.0.0,special_id:4a500000}\n",
1773 .support_trail
= '\x00',
1776 /** We're using a dynamic kernel/rootfs split here */
1778 {"fs-uboot", 0x00000, 0x20000},
1779 {"firmware", 0x20000, 0x5e0000},
1780 {"partition-table", 0x600000, 0x02000},
1781 {"default-mac", 0x610000, 0x00020},
1782 {"pin", 0x610100, 0x00020},
1783 {"product-info", 0x611100, 0x01000},
1784 {"soft-version", 0x620000, 0x01000},
1785 {"support-list", 0x621000, 0x01000},
1786 {"profile", 0x622000, 0x08000},
1787 {"user-config", 0x630000, 0x10000},
1788 {"default-config", 0x640000, 0x10000},
1789 {"radio", 0x7f0000, 0x10000},
1793 .first_sysupgrade_partition
= "os-image",
1794 .last_sysupgrade_partition
= "file-system"
1797 /** Firmware layout for the RE350K v1 */
1803 "{product_name:RE350K,product_ver:1.0.0,special_id:00000000,product_region:US}\n",
1804 .support_trail
= '\x00',
1807 /** We're using a dynamic kernel/rootfs split here */
1809 {"fs-uboot", 0x00000, 0x20000},
1810 {"firmware", 0x20000, 0xd70000},
1811 {"partition-table", 0xd90000, 0x02000},
1812 {"default-mac", 0xda0000, 0x00020},
1813 {"pin", 0xda0100, 0x00020},
1814 {"product-info", 0xda1100, 0x01000},
1815 {"soft-version", 0xdb0000, 0x01000},
1816 {"support-list", 0xdb1000, 0x01000},
1817 {"profile", 0xdb2000, 0x08000},
1818 {"user-config", 0xdc0000, 0x10000},
1819 {"default-config", 0xdd0000, 0x10000},
1820 {"device-id", 0xde0000, 0x00108},
1821 {"radio", 0xff0000, 0x10000},
1825 .first_sysupgrade_partition
= "os-image",
1826 .last_sysupgrade_partition
= "file-system"
1829 /** Firmware layout for the RE355 */
1835 "{product_name:RE355,product_ver:1.0.0,special_id:00000000}\r\n"
1836 "{product_name:RE355,product_ver:1.0.0,special_id:55530000}\r\n"
1837 "{product_name:RE355,product_ver:1.0.0,special_id:45550000}\r\n"
1838 "{product_name:RE355,product_ver:1.0.0,special_id:4A500000}\r\n"
1839 "{product_name:RE355,product_ver:1.0.0,special_id:43410000}\r\n"
1840 "{product_name:RE355,product_ver:1.0.0,special_id:41550000}\r\n"
1841 "{product_name:RE355,product_ver:1.0.0,special_id:4B520000}\r\n"
1842 "{product_name:RE355,product_ver:1.0.0,special_id:55534100}\r\n",
1843 .support_trail
= '\x00',
1846 /* We're using a dynamic kernel/rootfs split here */
1848 {"fs-uboot", 0x00000, 0x20000},
1849 {"firmware", 0x20000, 0x5e0000},
1850 {"partition-table", 0x600000, 0x02000},
1851 {"default-mac", 0x610000, 0x00020},
1852 {"pin", 0x610100, 0x00020},
1853 {"product-info", 0x611100, 0x01000},
1854 {"soft-version", 0x620000, 0x01000},
1855 {"support-list", 0x621000, 0x01000},
1856 {"profile", 0x622000, 0x08000},
1857 {"user-config", 0x630000, 0x10000},
1858 {"default-config", 0x640000, 0x10000},
1859 {"radio", 0x7f0000, 0x10000},
1863 .first_sysupgrade_partition
= "os-image",
1864 .last_sysupgrade_partition
= "file-system"
1867 /** Firmware layout for the RE450 */
1873 "{product_name:RE450,product_ver:1.0.0,special_id:00000000}\r\n"
1874 "{product_name:RE450,product_ver:1.0.0,special_id:55530000}\r\n"
1875 "{product_name:RE450,product_ver:1.0.0,special_id:45550000}\r\n"
1876 "{product_name:RE450,product_ver:1.0.0,special_id:4A500000}\r\n"
1877 "{product_name:RE450,product_ver:1.0.0,special_id:43410000}\r\n"
1878 "{product_name:RE450,product_ver:1.0.0,special_id:41550000}\r\n"
1879 "{product_name:RE450,product_ver:1.0.0,special_id:4B520000}\r\n"
1880 "{product_name:RE450,product_ver:1.0.0,special_id:55534100}\r\n",
1881 .support_trail
= '\x00',
1884 /** We're using a dynamic kernel/rootfs split here */
1886 {"fs-uboot", 0x00000, 0x20000},
1887 {"firmware", 0x20000, 0x5e0000},
1888 {"partition-table", 0x600000, 0x02000},
1889 {"default-mac", 0x610000, 0x00020},
1890 {"pin", 0x610100, 0x00020},
1891 {"product-info", 0x611100, 0x01000},
1892 {"soft-version", 0x620000, 0x01000},
1893 {"support-list", 0x621000, 0x01000},
1894 {"profile", 0x622000, 0x08000},
1895 {"user-config", 0x630000, 0x10000},
1896 {"default-config", 0x640000, 0x10000},
1897 {"radio", 0x7f0000, 0x10000},
1901 .first_sysupgrade_partition
= "os-image",
1902 .last_sysupgrade_partition
= "file-system"
1905 /** Firmware layout for the RE450 v2 */
1911 "{product_name:RE450,product_ver:2.0.0,special_id:00000000}\r\n"
1912 "{product_name:RE450,product_ver:2.0.0,special_id:55530000}\r\n"
1913 "{product_name:RE450,product_ver:2.0.0,special_id:45550000}\r\n"
1914 "{product_name:RE450,product_ver:2.0.0,special_id:4A500000}\r\n"
1915 "{product_name:RE450,product_ver:2.0.0,special_id:43410000}\r\n"
1916 "{product_name:RE450,product_ver:2.0.0,special_id:41550000}\r\n"
1917 "{product_name:RE450,product_ver:2.0.0,special_id:41530000}\r\n"
1918 "{product_name:RE450,product_ver:2.0.0,special_id:4B520000}\r\n"
1919 "{product_name:RE450,product_ver:2.0.0,special_id:42520000}\r\n",
1920 .support_trail
= '\x00',
1923 /* We're using a dynamic kernel/rootfs split here */
1925 {"fs-uboot", 0x00000, 0x20000},
1926 {"firmware", 0x20000, 0x5e0000},
1927 {"partition-table", 0x600000, 0x02000},
1928 {"default-mac", 0x610000, 0x00020},
1929 {"pin", 0x610100, 0x00020},
1930 {"product-info", 0x611100, 0x01000},
1931 {"soft-version", 0x620000, 0x01000},
1932 {"support-list", 0x621000, 0x01000},
1933 {"profile", 0x622000, 0x08000},
1934 {"user-config", 0x630000, 0x10000},
1935 {"default-config", 0x640000, 0x10000},
1936 {"radio", 0x7f0000, 0x10000},
1940 .first_sysupgrade_partition
= "os-image",
1941 .last_sysupgrade_partition
= "file-system"
1944 /** Firmware layout for the RE450 v3 */
1950 "{product_name:RE450,product_ver:3.0.0,special_id:00000000}\r\n"
1951 "{product_name:RE450,product_ver:3.0.0,special_id:55530000}\r\n"
1952 "{product_name:RE450,product_ver:3.0.0,special_id:45550000}\r\n"
1953 "{product_name:RE450,product_ver:3.0.0,special_id:4A500000}\r\n"
1954 "{product_name:RE450,product_ver:3.0.0,special_id:43410000}\r\n"
1955 "{product_name:RE450,product_ver:3.0.0,special_id:41550000}\r\n"
1956 "{product_name:RE450,product_ver:3.0.0,special_id:41530000}\r\n"
1957 "{product_name:RE450,product_ver:3.0.0,special_id:4B520000}\r\n"
1958 "{product_name:RE450,product_ver:3.0.0,special_id:42520000}\r\n",
1959 .support_trail
= '\x00',
1962 /* We're using a dynamic kernel/rootfs split here */
1964 {"fs-uboot", 0x00000, 0x20000},
1965 {"default-mac", 0x20000, 0x00020},
1966 {"pin", 0x20020, 0x00020},
1967 {"product-info", 0x21000, 0x01000},
1968 {"partition-table", 0x22000, 0x02000},
1969 {"soft-version", 0x24000, 0x01000},
1970 {"support-list", 0x25000, 0x01000},
1971 {"profile", 0x26000, 0x08000},
1972 {"user-config", 0x2e000, 0x10000},
1973 {"default-config", 0x3e000, 0x10000},
1974 {"config-info", 0x4e000, 0x00400},
1975 {"firmware", 0x50000, 0x7a0000},
1976 {"radio", 0x7f0000, 0x10000},
1980 .first_sysupgrade_partition
= "os-image",
1981 .last_sysupgrade_partition
= "file-system"
1984 /** Firmware layout for the RE500 */
1990 "{product_name:RE500,product_ver:1.0.0,special_id:00000000}\r\n"
1991 "{product_name:RE500,product_ver:1.0.0,special_id:55530000}\r\n"
1992 "{product_name:RE500,product_ver:1.0.0,special_id:45550000}\r\n"
1993 "{product_name:RE500,product_ver:1.0.0,special_id:4A500000}\r\n"
1994 "{product_name:RE500,product_ver:1.0.0,special_id:43410000}\r\n"
1995 "{product_name:RE500,product_ver:1.0.0,special_id:41550000}\r\n"
1996 "{product_name:RE500,product_ver:1.0.0,special_id:41530000}\r\n",
1997 .support_trail
= '\x00',
2000 /* We're using a dynamic kernel/rootfs split here */
2002 {"fs-uboot", 0x00000, 0x20000},
2003 {"firmware", 0x20000, 0xde0000},
2004 {"partition-table", 0xe00000, 0x02000},
2005 {"default-mac", 0xe10000, 0x00020},
2006 {"pin", 0xe10100, 0x00020},
2007 {"product-info", 0xe11100, 0x01000},
2008 {"soft-version", 0xe20000, 0x01000},
2009 {"support-list", 0xe21000, 0x01000},
2010 {"profile", 0xe22000, 0x08000},
2011 {"user-config", 0xe30000, 0x10000},
2012 {"default-config", 0xe40000, 0x10000},
2013 {"radio", 0xff0000, 0x10000},
2017 .first_sysupgrade_partition
= "os-image",
2018 .last_sysupgrade_partition
= "file-system"
2021 /** Firmware layout for the RE650 */
2027 "{product_name:RE650,product_ver:1.0.0,special_id:00000000}\r\n"
2028 "{product_name:RE650,product_ver:1.0.0,special_id:55530000}\r\n"
2029 "{product_name:RE650,product_ver:1.0.0,special_id:45550000}\r\n"
2030 "{product_name:RE650,product_ver:1.0.0,special_id:4A500000}\r\n"
2031 "{product_name:RE650,product_ver:1.0.0,special_id:43410000}\r\n"
2032 "{product_name:RE650,product_ver:1.0.0,special_id:41550000}\r\n"
2033 "{product_name:RE650,product_ver:1.0.0,special_id:41530000}\r\n",
2034 .support_trail
= '\x00',
2037 /* We're using a dynamic kernel/rootfs split here */
2039 {"fs-uboot", 0x00000, 0x20000},
2040 {"firmware", 0x20000, 0xde0000},
2041 {"partition-table", 0xe00000, 0x02000},
2042 {"default-mac", 0xe10000, 0x00020},
2043 {"pin", 0xe10100, 0x00020},
2044 {"product-info", 0xe11100, 0x01000},
2045 {"soft-version", 0xe20000, 0x01000},
2046 {"support-list", 0xe21000, 0x01000},
2047 {"profile", 0xe22000, 0x08000},
2048 {"user-config", 0xe30000, 0x10000},
2049 {"default-config", 0xe40000, 0x10000},
2050 {"radio", 0xff0000, 0x10000},
2054 .first_sysupgrade_partition
= "os-image",
2055 .last_sysupgrade_partition
= "file-system"
2061 #define error(_ret, _errno, _str, ...) \
2063 fprintf(stderr, _str ": %s\n", ## __VA_ARGS__, \
2064 strerror(_errno)); \
2070 /** Stores a uint32 as big endian */
2071 static inline void put32(uint8_t *buf
, uint32_t val
) {
2078 /** Allocates a new image partition */
2079 static struct image_partition_entry
alloc_image_partition(const char *name
, size_t len
) {
2080 struct image_partition_entry entry
= {name
, len
, malloc(len
)};
2082 error(1, errno
, "malloc");
2087 /** Frees an image partition */
2088 static void free_image_partition(struct image_partition_entry entry
) {
2092 static time_t source_date_epoch
= -1;
2093 static void set_source_date_epoch() {
2094 char *env
= getenv("SOURCE_DATE_EPOCH");
2098 source_date_epoch
= strtoull(env
, &endptr
, 10);
2099 if (errno
|| (endptr
&& *endptr
!= '\0')) {
2100 fprintf(stderr
, "Invalid SOURCE_DATE_EPOCH");
2106 /** Generates the partition-table partition */
2107 static struct image_partition_entry
make_partition_table(const struct flash_partition_entry
*p
) {
2108 struct image_partition_entry entry
= alloc_image_partition("partition-table", 0x800);
2110 char *s
= (char *)entry
.data
, *end
= (char *)(s
+entry
.size
);
2118 for (i
= 0; p
[i
].name
; i
++) {
2120 size_t w
= snprintf(s
, len
, "partition %s base 0x%05x size 0x%05x\n", p
[i
].name
, p
[i
].base
, p
[i
].size
);
2123 error(1, 0, "flash partition table overflow?");
2130 memset(s
, 0xff, end
-s
);
2136 /** Generates a binary-coded decimal representation of an integer in the range [0, 99] */
2137 static inline uint8_t bcd(uint8_t v
) {
2138 return 0x10 * (v
/10) + v
%10;
2142 /** Generates the soft-version partition */
2143 static struct image_partition_entry
make_soft_version(uint32_t rev
) {
2144 struct image_partition_entry entry
= alloc_image_partition("soft-version", sizeof(struct soft_version
));
2145 struct soft_version
*s
= (struct soft_version
*)entry
.data
;
2149 if (source_date_epoch
!= -1)
2150 t
= source_date_epoch
;
2151 else if (time(&t
) == (time_t)(-1))
2152 error(1, errno
, "time");
2154 struct tm
*tm
= gmtime(&t
);
2156 s
->magic
= htonl(0x0000000c);
2160 s
->version_major
= 0;
2161 s
->version_minor
= 0;
2162 s
->version_patch
= 0;
2164 s
->year_hi
= bcd((1900+tm
->tm_year
)/100);
2165 s
->year_lo
= bcd(tm
->tm_year
%100);
2166 s
->month
= bcd(tm
->tm_mon
+1);
2167 s
->day
= bcd(tm
->tm_mday
);
2168 s
->rev
= htonl(rev
);
2175 static struct image_partition_entry
make_soft_version_from_string(const char *soft_ver
) {
2176 /** String length _including_ the terminating zero byte */
2177 uint32_t ver_len
= strlen(soft_ver
) + 1;
2178 /** Partition contains 64 bit header, the version string, and one additional null byte */
2179 size_t partition_len
= 2*sizeof(uint32_t) + ver_len
+ 1;
2180 struct image_partition_entry entry
= alloc_image_partition("soft-version", partition_len
);
2182 uint32_t *len
= (uint32_t *)entry
.data
;
2183 len
[0] = htonl(ver_len
);
2185 memcpy(&len
[2], soft_ver
, ver_len
);
2187 entry
.data
[partition_len
- 1] = 0;
2192 /** Generates the support-list partition */
2193 static struct image_partition_entry
make_support_list(struct device_info
*info
) {
2194 size_t len
= strlen(info
->support_list
);
2195 struct image_partition_entry entry
= alloc_image_partition("support-list", len
+ 9);
2197 put32(entry
.data
, len
);
2198 memset(entry
.data
+4, 0, 4);
2199 memcpy(entry
.data
+8, info
->support_list
, len
);
2200 entry
.data
[len
+8] = info
->support_trail
;
2205 /** Creates a new image partition with an arbitrary name from a file */
2206 static struct image_partition_entry
read_file(const char *part_name
, const char *filename
, bool add_jffs2_eof
, struct flash_partition_entry
*file_system_partition
) {
2207 struct stat statbuf
;
2209 if (stat(filename
, &statbuf
) < 0)
2210 error(1, errno
, "unable to stat file `%s'", filename
);
2212 size_t len
= statbuf
.st_size
;
2214 if (add_jffs2_eof
) {
2215 if (file_system_partition
)
2216 len
= ALIGN(len
+ file_system_partition
->base
, 0x10000) + sizeof(jffs2_eof_mark
) - file_system_partition
->base
;
2218 len
= ALIGN(len
, 0x10000) + sizeof(jffs2_eof_mark
);
2221 struct image_partition_entry entry
= alloc_image_partition(part_name
, len
);
2223 FILE *file
= fopen(filename
, "rb");
2225 error(1, errno
, "unable to open file `%s'", filename
);
2227 if (fread(entry
.data
, statbuf
.st_size
, 1, file
) != 1)
2228 error(1, errno
, "unable to read file `%s'", filename
);
2230 if (add_jffs2_eof
) {
2231 uint8_t *eof
= entry
.data
+ statbuf
.st_size
, *end
= entry
.data
+entry
.size
;
2233 memset(eof
, 0xff, end
- eof
- sizeof(jffs2_eof_mark
));
2234 memcpy(end
- sizeof(jffs2_eof_mark
), jffs2_eof_mark
, sizeof(jffs2_eof_mark
));
2242 /** Creates a new image partition from arbitrary data */
2243 static struct image_partition_entry
put_data(const char *part_name
, const char *datain
, size_t len
) {
2245 struct image_partition_entry entry
= alloc_image_partition(part_name
, len
);
2247 memcpy(entry
.data
, datain
, len
);
2253 Copies a list of image partitions into an image buffer and generates the image partition table while doing so
2255 Example image partition table:
2257 fwup-ptn partition-table base 0x00800 size 0x00800
2258 fwup-ptn os-image base 0x01000 size 0x113b45
2259 fwup-ptn file-system base 0x114b45 size 0x1d0004
2260 fwup-ptn support-list base 0x2e4b49 size 0x000d1
2262 Each line of the partition table is terminated with the bytes 09 0d 0a ("\t\r\n"),
2263 the end of the partition table is marked with a zero byte.
2265 The firmware image must contain at least the partition-table and support-list partitions
2266 to be accepted. There aren't any alignment constraints for the image partitions.
2268 The partition-table partition contains the actual flash layout; partitions
2269 from the image partition table are mapped to the corresponding flash partitions during
2270 the firmware upgrade. The support-list partition contains a list of devices supported by
2273 The base offsets in the firmware partition table are relative to the end
2274 of the vendor information block, so the partition-table partition will
2275 actually start at offset 0x1814 of the image.
2277 I think partition-table must be the first partition in the firmware image.
2279 static void put_partitions(uint8_t *buffer
, const struct flash_partition_entry
*flash_parts
, const struct image_partition_entry
*parts
) {
2281 char *image_pt
= (char *)buffer
, *end
= image_pt
+ 0x800;
2283 size_t base
= 0x800;
2284 for (i
= 0; parts
[i
].name
; i
++) {
2285 for (j
= 0; flash_parts
[j
].name
; j
++) {
2286 if (!strcmp(flash_parts
[j
].name
, parts
[i
].name
)) {
2287 if (parts
[i
].size
> flash_parts
[j
].size
)
2288 error(1, 0, "%s partition too big (more than %u bytes)", flash_parts
[j
].name
, (unsigned)flash_parts
[j
].size
);
2293 assert(flash_parts
[j
].name
);
2295 memcpy(buffer
+ base
, parts
[i
].data
, parts
[i
].size
);
2297 size_t len
= end
-image_pt
;
2298 size_t w
= snprintf(image_pt
, len
, "fwup-ptn %s base 0x%05x size 0x%05x\t\r\n", parts
[i
].name
, (unsigned)base
, (unsigned)parts
[i
].size
);
2301 error(1, 0, "image partition table overflow?");
2305 base
+= parts
[i
].size
;
2309 /** Generates and writes the image MD5 checksum */
2310 static void put_md5(uint8_t *md5
, uint8_t *buffer
, unsigned int len
) {
2314 MD5_Update(&ctx
, md5_salt
, (unsigned int)sizeof(md5_salt
));
2315 MD5_Update(&ctx
, buffer
, len
);
2316 MD5_Final(md5
, &ctx
);
2321 Generates the firmware image in factory format
2327 0000-0003 Image size (4 bytes, big endian)
2328 0004-0013 MD5 hash (hash of a 16 byte salt and the image data starting with byte 0x14)
2329 0014-0017 Vendor information length (without padding) (4 bytes, big endian)
2330 0018-1013 Vendor information (4092 bytes, padded with 0xff; there seem to be older
2331 (VxWorks-based) TP-LINK devices which use a smaller vendor information block)
2332 1014-1813 Image partition table (2048 bytes, padded with 0xff)
2333 1814-xxxx Firmware partitions
2335 static void * generate_factory_image(struct device_info
*info
, const struct image_partition_entry
*parts
, size_t *len
) {
2339 for (i
= 0; parts
[i
].name
; i
++)
2340 *len
+= parts
[i
].size
;
2342 uint8_t *image
= malloc(*len
);
2344 error(1, errno
, "malloc");
2346 memset(image
, 0xff, *len
);
2350 size_t vendor_len
= strlen(info
->vendor
);
2351 put32(image
+0x14, vendor_len
);
2352 memcpy(image
+0x18, info
->vendor
, vendor_len
);
2355 put_partitions(image
+ 0x1014, info
->partitions
, parts
);
2356 put_md5(image
+0x04, image
+0x14, *len
-0x14);
2362 Generates the firmware image in sysupgrade format
2364 This makes some assumptions about the provided flash and image partition tables and
2365 should be generalized when TP-LINK starts building its safeloader into hardware with
2366 different flash layouts.
2368 static void * generate_sysupgrade_image(struct device_info
*info
, const struct image_partition_entry
*image_parts
, size_t *len
) {
2370 size_t flash_first_partition_index
= 0;
2371 size_t flash_last_partition_index
= 0;
2372 const struct flash_partition_entry
*flash_first_partition
= NULL
;
2373 const struct flash_partition_entry
*flash_last_partition
= NULL
;
2374 const struct image_partition_entry
*image_last_partition
= NULL
;
2376 /** Find first and last partitions */
2377 for (i
= 0; info
->partitions
[i
].name
; i
++) {
2378 if (!strcmp(info
->partitions
[i
].name
, info
->first_sysupgrade_partition
)) {
2379 flash_first_partition
= &info
->partitions
[i
];
2380 flash_first_partition_index
= i
;
2381 } else if (!strcmp(info
->partitions
[i
].name
, info
->last_sysupgrade_partition
)) {
2382 flash_last_partition
= &info
->partitions
[i
];
2383 flash_last_partition_index
= i
;
2387 assert(flash_first_partition
&& flash_last_partition
);
2388 assert(flash_first_partition_index
< flash_last_partition_index
);
2390 /** Find last partition from image to calculate needed size */
2391 for (i
= 0; image_parts
[i
].name
; i
++) {
2392 if (!strcmp(image_parts
[i
].name
, info
->last_sysupgrade_partition
)) {
2393 image_last_partition
= &image_parts
[i
];
2398 assert(image_last_partition
);
2400 *len
= flash_last_partition
->base
- flash_first_partition
->base
+ image_last_partition
->size
;
2402 uint8_t *image
= malloc(*len
);
2404 error(1, errno
, "malloc");
2406 memset(image
, 0xff, *len
);
2408 for (i
= flash_first_partition_index
; i
<= flash_last_partition_index
; i
++) {
2409 for (j
= 0; image_parts
[j
].name
; j
++) {
2410 if (!strcmp(info
->partitions
[i
].name
, image_parts
[j
].name
)) {
2411 if (image_parts
[j
].size
> info
->partitions
[i
].size
)
2412 error(1, 0, "%s partition too big (more than %u bytes)", info
->partitions
[i
].name
, (unsigned)info
->partitions
[i
].size
);
2413 memcpy(image
+ info
->partitions
[i
].base
- flash_first_partition
->base
, image_parts
[j
].data
, image_parts
[j
].size
);
2417 assert(image_parts
[j
].name
);
2424 /** Generates an image according to a given layout and writes it to a file */
2425 static void build_image(const char *output
,
2426 const char *kernel_image
,
2427 const char *rootfs_image
,
2431 struct device_info
*info
) {
2435 struct image_partition_entry parts
[7] = {};
2437 struct flash_partition_entry
*firmware_partition
= NULL
;
2438 struct flash_partition_entry
*os_image_partition
= NULL
;
2439 struct flash_partition_entry
*file_system_partition
= NULL
;
2440 size_t firmware_partition_index
= 0;
2442 for (i
= 0; info
->partitions
[i
].name
; i
++) {
2443 if (!strcmp(info
->partitions
[i
].name
, "firmware"))
2445 firmware_partition
= &info
->partitions
[i
];
2446 firmware_partition_index
= i
;
2450 if (firmware_partition
)
2452 os_image_partition
= &info
->partitions
[firmware_partition_index
];
2453 file_system_partition
= &info
->partitions
[firmware_partition_index
+ 1];
2456 if (stat(kernel_image
, &kernel
) < 0)
2457 error(1, errno
, "unable to stat file `%s'", kernel_image
);
2459 if (kernel
.st_size
> firmware_partition
->size
)
2460 error(1, 0, "kernel overflowed firmware partition\n");
2462 for (i
= MAX_PARTITIONS
-1; i
>= firmware_partition_index
+ 1; i
--)
2463 info
->partitions
[i
+1] = info
->partitions
[i
];
2465 file_system_partition
->name
= "file-system";
2466 file_system_partition
->base
= firmware_partition
->base
+ kernel
.st_size
;
2468 /* Align partition start to erase blocks for factory images only */
2470 file_system_partition
->base
= ALIGN(firmware_partition
->base
+ kernel
.st_size
, 0x10000);
2472 file_system_partition
->size
= firmware_partition
->size
- file_system_partition
->base
;
2474 os_image_partition
->name
= "os-image";
2475 os_image_partition
->size
= kernel
.st_size
;
2478 parts
[0] = make_partition_table(info
->partitions
);
2480 parts
[1] = make_soft_version_from_string(info
->soft_ver
);
2482 parts
[1] = make_soft_version(rev
);
2484 parts
[2] = make_support_list(info
);
2485 parts
[3] = read_file("os-image", kernel_image
, false, NULL
);
2486 parts
[4] = read_file("file-system", rootfs_image
, add_jffs2_eof
, file_system_partition
);
2488 /* Some devices need the extra-para partition to accept the firmware */
2489 if (strcasecmp(info
->id
, "ARCHER-C2-V3") == 0 ||
2490 strcasecmp(info
->id
, "ARCHER-C25-V1") == 0 ||
2491 strcasecmp(info
->id
, "ARCHER-C59-V2") == 0 ||
2492 strcasecmp(info
->id
, "ARCHER-C60-V2") == 0 ||
2493 strcasecmp(info
->id
, "ARCHER-C60-V3") == 0 ||
2494 strcasecmp(info
->id
, "TLWR1043NV5") == 0) {
2495 const char mdat
[11] = {0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00};
2496 parts
[5] = put_data("extra-para", mdat
, 11);
2497 } else if (strcasecmp(info
->id
, "ARCHER-A7-V5") == 0 || strcasecmp(info
->id
, "ARCHER-C7-V4") == 0 || strcasecmp(info
->id
, "ARCHER-C7-V5") == 0) {
2498 const char mdat
[11] = {0x01, 0x00, 0x00, 0x02, 0x00, 0x00, 0xca, 0x00, 0x01, 0x00, 0x00};
2499 parts
[5] = put_data("extra-para", mdat
, 11);
2500 } else if (strcasecmp(info
->id
, "ARCHER-C6-V2") == 0) {
2501 const char mdat
[11] = {0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00};
2502 parts
[5] = put_data("extra-para", mdat
, 11);
2503 } else if (strcasecmp(info
->id
, "ARCHER-C6-V2-US") == 0) {
2504 const char mdat
[11] = {0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x00};
2505 parts
[5] = put_data("extra-para", mdat
, 11);
2511 image
= generate_sysupgrade_image(info
, parts
, &len
);
2513 image
= generate_factory_image(info
, parts
, &len
);
2515 FILE *file
= fopen(output
, "wb");
2517 error(1, errno
, "unable to open output file");
2519 if (fwrite(image
, len
, 1, file
) != 1)
2520 error(1, 0, "unable to write output file");
2526 for (i
= 0; parts
[i
].name
; i
++)
2527 free_image_partition(parts
[i
]);
2531 static void usage(const char *argv0
) {
2533 "Usage: %s [OPTIONS...]\n"
2536 " -h show this help\n"
2538 "Create a new image:\n"
2539 " -B <board> create image for the board specified with <board>\n"
2540 " -k <file> read kernel image from the file <file>\n"
2541 " -r <file> read rootfs image from the file <file>\n"
2542 " -o <file> write output to the file <file>\n"
2543 " -V <rev> sets the revision number to <rev>\n"
2544 " -j add jffs2 end-of-filesystem markers\n"
2545 " -S create sysupgrade instead of factory image\n"
2546 "Extract an old image:\n"
2547 " -x <file> extract all oem firmware partition\n"
2548 " -d <dir> destination to extract the firmware partition\n"
2549 " -z <file> convert an oem firmware into a sysupgade file. Use -o for output file\n",
2555 static struct device_info
*find_board(const char *id
)
2557 struct device_info
*board
= NULL
;
2559 for (board
= boards
; board
->id
!= NULL
; board
++)
2560 if (strcasecmp(id
, board
->id
) == 0)
2566 static int add_flash_partition(
2567 struct flash_partition_entry
*part_list
,
2574 /* check if the list has a free entry */
2575 for (ptr
= 0; ptr
< max_entries
; ptr
++, part_list
++) {
2576 if (part_list
->name
== NULL
&&
2577 part_list
->base
== 0 &&
2578 part_list
->size
== 0)
2582 if (ptr
== max_entries
) {
2583 error(1, 0, "No free flash part entry available.");
2586 part_list
->name
= calloc(1, strlen(name
) + 1);
2587 if (!part_list
->name
) {
2588 error(1, 0, "Unable to allocate memory");
2591 memcpy((char *)part_list
->name
, name
, strlen(name
));
2592 part_list
->base
= base
;
2593 part_list
->size
= size
;
2598 /** read the partition table into struct flash_partition_entry */
2599 static int read_partition_table(
2600 FILE *file
, long offset
,
2601 struct flash_partition_entry
*entries
, size_t max_entries
,
2606 const char *parthdr
= NULL
;
2607 const char *fwuphdr
= "fwup-ptn";
2608 const char *flashhdr
= "partition";
2610 /* TODO: search for the partition table */
2620 error(1, 0, "Invalid partition table");
2623 if (fseek(file
, offset
, SEEK_SET
) < 0)
2624 error(1, errno
, "Can not seek in the firmware");
2626 if (fread(buf
, 2048, 1, file
) != 1)
2627 error(1, errno
, "Can not read fwup-ptn from the firmware");
2631 /* look for the partition header */
2632 if (memcmp(buf
, parthdr
, strlen(parthdr
)) != 0) {
2633 fprintf(stderr
, "DEBUG: can not find fwuphdr\n");
2638 end
= buf
+ sizeof(buf
);
2639 while ((ptr
+ strlen(parthdr
)) < end
&&
2640 memcmp(ptr
, parthdr
, strlen(parthdr
)) == 0) {
2644 char name
[32] = { 0 };
2646 unsigned long base
= 0;
2647 unsigned long size
= 0;
2649 end_part
= memchr(ptr
, '\n', (end
- ptr
));
2650 if (end_part
== NULL
) {
2651 /* in theory this should never happen, because a partition always ends with 0x09, 0x0D, 0x0A */
2655 for (int i
= 0; i
<= 4; i
++) {
2656 if (end_part
<= ptr
)
2659 end_element
= memchr(ptr
, 0x20, (end_part
- ptr
));
2660 if (end_element
== NULL
) {
2661 error(1, errno
, "Ignoring the rest of the partition entries.");
2666 /* partition header */
2668 ptr
= end_element
+ 1;
2672 name_len
= (end_element
- ptr
) > 31 ? 31 : (end_element
- ptr
);
2673 strncpy(name
, ptr
, name_len
);
2674 name
[name_len
] = '\0';
2675 ptr
= end_element
+ 1;
2680 ptr
= end_element
+ 1;
2685 base
= strtoul(ptr
, NULL
, 16);
2686 ptr
= end_element
+ 1;
2691 ptr
= end_element
+ 1;
2692 /* actual size. The last element doesn't have a sepeartor */
2693 size
= strtoul(ptr
, NULL
, 16);
2694 /* the part ends with 0x09, 0x0d, 0x0a */
2696 add_flash_partition(entries
, max_entries
, name
, base
, size
);
2705 static void write_partition(
2707 size_t firmware_offset
,
2708 struct flash_partition_entry
*entry
,
2714 fseek(input_file
, entry
->base
+ firmware_offset
, SEEK_SET
);
2716 for (offset
= 0; sizeof(buf
) + offset
<= entry
->size
; offset
+= sizeof(buf
)) {
2717 if (fread(buf
, sizeof(buf
), 1, input_file
) != 1)
2718 error(1, errno
, "Can not read partition from input_file");
2720 if (fwrite(buf
, sizeof(buf
), 1, output_file
) != 1)
2721 error(1, errno
, "Can not write partition to output_file");
2723 /* write last chunk smaller than buffer */
2724 if (offset
< entry
->size
) {
2725 offset
= entry
->size
- offset
;
2726 if (fread(buf
, offset
, 1, input_file
) != 1)
2727 error(1, errno
, "Can not read partition from input_file");
2728 if (fwrite(buf
, offset
, 1, output_file
) != 1)
2729 error(1, errno
, "Can not write partition to output_file");
2733 static int extract_firmware_partition(FILE *input_file
, size_t firmware_offset
, struct flash_partition_entry
*entry
, const char *output_directory
)
2736 char output
[PATH_MAX
];
2738 snprintf(output
, PATH_MAX
, "%s/%s", output_directory
, entry
->name
);
2739 output_file
= fopen(output
, "wb+");
2740 if (output_file
== NULL
) {
2741 error(1, errno
, "Can not open output file %s", output
);
2744 write_partition(input_file
, firmware_offset
, entry
, output_file
);
2746 fclose(output_file
);
2751 /** extract all partitions from the firmware file */
2752 static int extract_firmware(const char *input
, const char *output_directory
)
2754 struct flash_partition_entry entries
[16] = { 0 };
2755 size_t max_entries
= 16;
2756 size_t firmware_offset
= 0x1014;
2759 struct stat statbuf
;
2761 /* check input file */
2762 if (stat(input
, &statbuf
)) {
2763 error(1, errno
, "Can not read input firmware %s", input
);
2766 /* check if output directory exists */
2767 if (stat(output_directory
, &statbuf
)) {
2768 error(1, errno
, "Failed to stat output directory %s", output_directory
);
2771 if ((statbuf
.st_mode
& S_IFMT
) != S_IFDIR
) {
2772 error(1, errno
, "Given output directory is not a directory %s", output_directory
);
2775 input_file
= fopen(input
, "rb");
2777 if (read_partition_table(input_file
, firmware_offset
, entries
, 16, 0) != 0) {
2778 error(1, 0, "Error can not read the partition table (fwup-ptn)");
2781 for (size_t i
= 0; i
< max_entries
; i
++) {
2782 if (entries
[i
].name
== NULL
&&
2783 entries
[i
].base
== 0 &&
2784 entries
[i
].size
== 0)
2787 extract_firmware_partition(input_file
, firmware_offset
, &entries
[i
], output_directory
);
2793 static struct flash_partition_entry
*find_partition(
2794 struct flash_partition_entry
*entries
, size_t max_entries
,
2795 const char *name
, const char *error_msg
)
2797 for (size_t i
= 0; i
< max_entries
; i
++, entries
++) {
2798 if (strcmp(entries
->name
, name
) == 0)
2802 error(1, 0, "%s", error_msg
);
2806 static void write_ff(FILE *output_file
, size_t size
)
2811 memset(buf
, 0xff, sizeof(buf
));
2813 for (offset
= 0; offset
+ sizeof(buf
) < size
; offset
+= sizeof(buf
)) {
2814 if (fwrite(buf
, sizeof(buf
), 1, output_file
) != 1)
2815 error(1, errno
, "Can not write 0xff to output_file");
2818 /* write last chunk smaller than buffer */
2819 if (offset
< size
) {
2820 offset
= size
- offset
;
2821 if (fwrite(buf
, offset
, 1, output_file
) != 1)
2822 error(1, errno
, "Can not write partition to output_file");
2826 static void convert_firmware(const char *input
, const char *output
)
2828 struct flash_partition_entry fwup
[MAX_PARTITIONS
] = { 0 };
2829 struct flash_partition_entry flash
[MAX_PARTITIONS
] = { 0 };
2830 struct flash_partition_entry
*fwup_os_image
= NULL
, *fwup_file_system
= NULL
;
2831 struct flash_partition_entry
*flash_os_image
= NULL
, *flash_file_system
= NULL
;
2832 struct flash_partition_entry
*fwup_partition_table
= NULL
;
2833 size_t firmware_offset
= 0x1014;
2834 FILE *input_file
, *output_file
;
2836 struct stat statbuf
;
2838 /* check input file */
2839 if (stat(input
, &statbuf
)) {
2840 error(1, errno
, "Can not read input firmware %s", input
);
2843 input_file
= fopen(input
, "rb");
2845 error(1, 0, "Can not open input firmware %s", input
);
2847 output_file
= fopen(output
, "wb");
2849 error(1, 0, "Can not open output firmware %s", output
);
2851 if (read_partition_table(input_file
, firmware_offset
, fwup
, MAX_PARTITIONS
, 0) != 0) {
2852 error(1, 0, "Error can not read the partition table (fwup-ptn)");
2855 fwup_os_image
= find_partition(fwup
, MAX_PARTITIONS
,
2856 "os-image", "Error can not find os-image partition (fwup)");
2857 fwup_file_system
= find_partition(fwup
, MAX_PARTITIONS
,
2858 "file-system", "Error can not find file-system partition (fwup)");
2859 fwup_partition_table
= find_partition(fwup
, MAX_PARTITIONS
,
2860 "partition-table", "Error can not find partition-table partition");
2862 /* the flash partition table has a 0x00000004 magic haeder */
2863 if (read_partition_table(input_file
, firmware_offset
+ fwup_partition_table
->base
+ 4, flash
, MAX_PARTITIONS
, 1) != 0)
2864 error(1, 0, "Error can not read the partition table (flash)");
2866 flash_os_image
= find_partition(flash
, MAX_PARTITIONS
,
2867 "os-image", "Error can not find os-image partition (flash)");
2868 flash_file_system
= find_partition(flash
, MAX_PARTITIONS
,
2869 "file-system", "Error can not find file-system partition (flash)");
2871 /* write os_image to 0x0 */
2872 write_partition(input_file
, firmware_offset
, fwup_os_image
, output_file
);
2873 write_ff(output_file
, flash_os_image
->size
- fwup_os_image
->size
);
2875 /* write file-system behind os_image */
2876 fseek(output_file
, flash_file_system
->base
- flash_os_image
->base
, SEEK_SET
);
2877 write_partition(input_file
, firmware_offset
, fwup_file_system
, output_file
);
2878 write_ff(output_file
, flash_file_system
->size
- fwup_file_system
->size
);
2880 fclose(output_file
);
2884 int main(int argc
, char *argv
[]) {
2885 const char *board
= NULL
, *kernel_image
= NULL
, *rootfs_image
= NULL
, *output
= NULL
;
2886 const char *extract_image
= NULL
, *output_directory
= NULL
, *convert_image
= NULL
;
2887 bool add_jffs2_eof
= false, sysupgrade
= false;
2889 struct device_info
*info
;
2890 set_source_date_epoch();
2895 c
= getopt(argc
, argv
, "B:k:r:o:V:jSh:x:d:z:");
2905 kernel_image
= optarg
;
2909 rootfs_image
= optarg
;
2917 sscanf(optarg
, "r%u", &rev
);
2921 add_jffs2_eof
= true;
2933 output_directory
= optarg
;
2937 extract_image
= optarg
;
2941 convert_image
= optarg
;
2950 if (extract_image
|| output_directory
) {
2952 error(1, 0, "No factory/oem image given via -x <file>. Output directory is only valid with -x");
2953 if (!output_directory
)
2954 error(1, 0, "Can not extract an image without output directory. Use -d <dir>");
2955 extract_firmware(extract_image
, output_directory
);
2956 } else if (convert_image
) {
2958 error(1, 0, "Can not convert a factory/oem image into sysupgrade image without output file. Use -o <file>");
2959 convert_firmware(convert_image
, output
);
2962 error(1, 0, "no board has been specified");
2964 error(1, 0, "no kernel image has been specified");
2966 error(1, 0, "no rootfs image has been specified");
2968 error(1, 0, "no output filename has been specified");
2970 info
= find_board(board
);
2973 error(1, 0, "unsupported board %s", board
);
2975 build_image(output
, kernel_image
, rootfs_image
, rev
, add_jffs2_eof
, sysupgrade
, info
);