2 Copyright (c) 2014, Matthias Schiffer <mschiffer@universe-factory.net>
5 Redistribution and use in source and binary forms, with or without
6 modification, are permitted provided that the following conditions are met:
8 1. Redistributions of source code must retain the above copyright notice,
9 this list of conditions and the following disclaimer.
10 2. Redistributions in binary form must reproduce the above copyright notice,
11 this list of conditions and the following disclaimer in the documentation
12 and/or other materials provided with the distribution.
14 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
15 AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16 IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
17 DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
18 FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19 DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
20 SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
21 CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
22 OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
23 OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
30 Image generation tool for the TP-LINK SafeLoader as seen on
31 TP-LINK Pharos devices (CPE210/220/510/520)
45 #include <arpa/inet.h>
47 #include <sys/types.h>
54 #define ALIGN(x,a) ({ typeof(a) __a = (a); (((x) + __a - 1) & ~(__a - 1)); })
57 #define MAX_PARTITIONS 32
59 /** An image partition table entry */
60 struct image_partition_entry
{
66 /** A flash partition table entry */
67 struct flash_partition_entry
{
73 /** Firmware layout description */
77 const char *support_list
;
80 struct flash_partition_entry partitions
[MAX_PARTITIONS
+1];
81 const char *first_sysupgrade_partition
;
82 const char *last_sysupgrade_partition
;
85 /** The content of the soft-version structure */
86 struct __attribute__((__packed__
)) soft_version
{
90 uint8_t version_major
;
91 uint8_t version_minor
;
92 uint8_t version_patch
;
102 static const uint8_t jffs2_eof_mark
[4] = {0xde, 0xad, 0xc0, 0xde};
106 Salt for the MD5 hash
108 Fortunately, TP-LINK seems to use the same salt for most devices which use
109 the new image format.
111 static const uint8_t md5_salt
[16] = {
112 0x7a, 0x2b, 0x15, 0xed,
113 0x9b, 0x98, 0x59, 0x6d,
114 0xe5, 0x04, 0xab, 0x44,
115 0xac, 0x2a, 0x9f, 0x4e,
119 /** Firmware layout table */
120 static struct device_info boards
[] = {
121 /** Firmware layout for the CPE210/220 V1 */
124 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
127 "CPE210(TP-LINK|UN|N300-2):1.0\r\n"
128 "CPE210(TP-LINK|UN|N300-2):1.1\r\n"
129 "CPE210(TP-LINK|US|N300-2):1.1\r\n"
130 "CPE210(TP-LINK|EU|N300-2):1.1\r\n"
131 "CPE220(TP-LINK|UN|N300-2):1.1\r\n"
132 "CPE220(TP-LINK|US|N300-2):1.1\r\n"
133 "CPE220(TP-LINK|EU|N300-2):1.1\r\n",
134 .support_trail
= '\xff',
138 {"fs-uboot", 0x00000, 0x20000},
139 {"partition-table", 0x20000, 0x02000},
140 {"default-mac", 0x30000, 0x00020},
141 {"product-info", 0x31100, 0x00100},
142 {"signature", 0x32000, 0x00400},
143 {"os-image", 0x40000, 0x200000},
144 {"file-system", 0x240000, 0x570000},
145 {"soft-version", 0x7b0000, 0x00100},
146 {"support-list", 0x7b1000, 0x00400},
147 {"user-config", 0x7c0000, 0x10000},
148 {"default-config", 0x7d0000, 0x10000},
149 {"log", 0x7e0000, 0x10000},
150 {"radio", 0x7f0000, 0x10000},
154 .first_sysupgrade_partition
= "os-image",
155 .last_sysupgrade_partition
= "support-list",
158 /** Firmware layout for the CPE210 V2 */
161 .vendor
= "CPE210(TP-LINK|UN|N300-2|00000000):2.0\r\n",
164 "CPE210(TP-LINK|EU|N300-2|00000000):2.0\r\n"
165 "CPE210(TP-LINK|EU|N300-2|45550000):2.0\r\n"
166 "CPE210(TP-LINK|EU|N300-2|55530000):2.0\r\n"
167 "CPE210(TP-LINK|UN|N300-2|00000000):2.0\r\n"
168 "CPE210(TP-LINK|UN|N300-2|45550000):2.0\r\n"
169 "CPE210(TP-LINK|UN|N300-2|55530000):2.0\r\n"
170 "CPE210(TP-LINK|US|N300-2|55530000):2.0\r\n"
171 "CPE210(TP-LINK|UN|N300-2):2.0\r\n"
172 "CPE210(TP-LINK|EU|N300-2):2.0\r\n"
173 "CPE210(TP-LINK|US|N300-2):2.0\r\n",
174 .support_trail
= '\xff',
178 {"fs-uboot", 0x00000, 0x20000},
179 {"partition-table", 0x20000, 0x02000},
180 {"default-mac", 0x30000, 0x00020},
181 {"product-info", 0x31100, 0x00100},
182 {"device-info", 0x31400, 0x00400},
183 {"signature", 0x32000, 0x00400},
184 {"device-id", 0x33000, 0x00100},
185 {"firmware", 0x40000, 0x770000},
186 {"soft-version", 0x7b0000, 0x00100},
187 {"support-list", 0x7b1000, 0x01000},
188 {"user-config", 0x7c0000, 0x10000},
189 {"default-config", 0x7d0000, 0x10000},
190 {"log", 0x7e0000, 0x10000},
191 {"radio", 0x7f0000, 0x10000},
195 .first_sysupgrade_partition
= "os-image",
196 .last_sysupgrade_partition
= "support-list",
199 /** Firmware layout for the CPE210 V3 */
202 .vendor
= "CPE210(TP-LINK|UN|N300-2|00000000):3.0\r\n",
205 "CPE210(TP-LINK|EU|N300-2|45550000):3.0\r\n"
206 "CPE210(TP-LINK|UN|N300-2|00000000):3.0\r\n"
207 "CPE210(TP-LINK|US|N300-2|55530000):3.0\r\n"
208 "CPE210(TP-LINK|UN|N300-2):3.0\r\n"
209 "CPE210(TP-LINK|EU|N300-2):3.0\r\n"
210 "CPE210(TP-LINK|EU|N300-2|45550000):3.1\r\n"
211 "CPE210(TP-LINK|UN|N300-2|00000000):3.1\r\n"
212 "CPE210(TP-LINK|US|N300-2|55530000):3.1\r\n"
213 "CPE210(TP-LINK|EU|N300-2|45550000):3.20\r\n"
214 "CPE210(TP-LINK|UN|N300-2|00000000):3.20\r\n"
215 "CPE210(TP-LINK|US|N300-2|55530000):3.20\r\n",
216 .support_trail
= '\xff',
220 {"fs-uboot", 0x00000, 0x20000},
221 {"partition-table", 0x20000, 0x01000},
222 {"default-mac", 0x30000, 0x00020},
223 {"product-info", 0x31100, 0x00100},
224 {"device-info", 0x31400, 0x00400},
225 {"signature", 0x32000, 0x00400},
226 {"device-id", 0x33000, 0x00100},
227 {"firmware", 0x40000, 0x770000},
228 {"soft-version", 0x7b0000, 0x00100},
229 {"support-list", 0x7b1000, 0x01000},
230 {"user-config", 0x7c0000, 0x10000},
231 {"default-config", 0x7d0000, 0x10000},
232 {"log", 0x7e0000, 0x10000},
233 {"radio", 0x7f0000, 0x10000},
237 .first_sysupgrade_partition
= "os-image",
238 .last_sysupgrade_partition
= "support-list",
241 /** Firmware layout for the CPE220 V2 */
244 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
247 "CPE220(TP-LINK|EU|N300-2|00000000):2.0\r\n"
248 "CPE220(TP-LINK|EU|N300-2|45550000):2.0\r\n"
249 "CPE220(TP-LINK|EU|N300-2|55530000):2.0\r\n"
250 "CPE220(TP-LINK|UN|N300-2|00000000):2.0\r\n"
251 "CPE220(TP-LINK|UN|N300-2|45550000):2.0\r\n"
252 "CPE220(TP-LINK|UN|N300-2|55530000):2.0\r\n"
253 "CPE220(TP-LINK|US|N300-2|55530000):2.0\r\n"
254 "CPE220(TP-LINK|UN|N300-2):2.0\r\n"
255 "CPE220(TP-LINK|EU|N300-2):2.0\r\n"
256 "CPE220(TP-LINK|US|N300-2):2.0\r\n",
257 .support_trail
= '\xff',
261 {"fs-uboot", 0x00000, 0x20000},
262 {"partition-table", 0x20000, 0x02000},
263 {"default-mac", 0x30000, 0x00020},
264 {"product-info", 0x31100, 0x00100},
265 {"signature", 0x32000, 0x00400},
266 {"os-image", 0x40000, 0x200000},
267 {"file-system", 0x240000, 0x570000},
268 {"soft-version", 0x7b0000, 0x00100},
269 {"support-list", 0x7b1000, 0x00400},
270 {"user-config", 0x7c0000, 0x10000},
271 {"default-config", 0x7d0000, 0x10000},
272 {"log", 0x7e0000, 0x10000},
273 {"radio", 0x7f0000, 0x10000},
277 .first_sysupgrade_partition
= "os-image",
278 .last_sysupgrade_partition
= "support-list",
281 /** Firmware layout for the CPE220 V3 */
284 .vendor
= "CPE220(TP-LINK|UN|N300-2|00000000):3.0\r\n",
287 "CPE220(TP-LINK|EU|N300-2|00000000):3.0\r\n"
288 "CPE220(TP-LINK|EU|N300-2|45550000):3.0\r\n"
289 "CPE220(TP-LINK|EU|N300-2|55530000):3.0\r\n"
290 "CPE220(TP-LINK|UN|N300-2|00000000):3.0\r\n"
291 "CPE220(TP-LINK|UN|N300-2|45550000):3.0\r\n"
292 "CPE220(TP-LINK|UN|N300-2|55530000):3.0\r\n"
293 "CPE220(TP-LINK|US|N300-2|55530000):3.0\r\n"
294 "CPE220(TP-LINK|UN|N300-2):3.0\r\n"
295 "CPE220(TP-LINK|EU|N300-2):3.0\r\n"
296 "CPE220(TP-LINK|US|N300-2):3.0\r\n",
297 .support_trail
= '\xff',
301 {"fs-uboot", 0x00000, 0x20000},
302 {"partition-table", 0x20000, 0x02000},
303 {"default-mac", 0x30000, 0x00020},
304 {"product-info", 0x31100, 0x00100},
305 {"device-info", 0x31400, 0x00400},
306 {"signature", 0x32000, 0x00400},
307 {"device-id", 0x33000, 0x00100},
308 {"firmware", 0x40000, 0x770000},
309 {"soft-version", 0x7b0000, 0x00100},
310 {"support-list", 0x7b1000, 0x01000},
311 {"user-config", 0x7c0000, 0x10000},
312 {"default-config", 0x7d0000, 0x10000},
313 {"log", 0x7e0000, 0x10000},
314 {"radio", 0x7f0000, 0x10000},
318 .first_sysupgrade_partition
= "os-image",
319 .last_sysupgrade_partition
= "support-list",
322 /** Firmware layout for the CPE510/520 V1 */
325 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
328 "CPE510(TP-LINK|UN|N300-5):1.0\r\n"
329 "CPE510(TP-LINK|UN|N300-5):1.1\r\n"
330 "CPE510(TP-LINK|UN|N300-5):1.1\r\n"
331 "CPE510(TP-LINK|US|N300-5):1.1\r\n"
332 "CPE510(TP-LINK|EU|N300-5):1.1\r\n"
333 "CPE520(TP-LINK|UN|N300-5):1.1\r\n"
334 "CPE520(TP-LINK|US|N300-5):1.1\r\n"
335 "CPE520(TP-LINK|EU|N300-5):1.1\r\n",
336 .support_trail
= '\xff',
340 {"fs-uboot", 0x00000, 0x20000},
341 {"partition-table", 0x20000, 0x02000},
342 {"default-mac", 0x30000, 0x00020},
343 {"product-info", 0x31100, 0x00100},
344 {"signature", 0x32000, 0x00400},
345 {"os-image", 0x40000, 0x200000},
346 {"file-system", 0x240000, 0x570000},
347 {"soft-version", 0x7b0000, 0x00100},
348 {"support-list", 0x7b1000, 0x00400},
349 {"user-config", 0x7c0000, 0x10000},
350 {"default-config", 0x7d0000, 0x10000},
351 {"log", 0x7e0000, 0x10000},
352 {"radio", 0x7f0000, 0x10000},
356 .first_sysupgrade_partition
= "os-image",
357 .last_sysupgrade_partition
= "support-list",
360 /** Firmware layout for the CPE510 V2 */
363 .vendor
= "CPE510(TP-LINK|UN|N300-5):2.0\r\n",
366 "CPE510(TP-LINK|EU|N300-5|00000000):2.0\r\n"
367 "CPE510(TP-LINK|EU|N300-5|45550000):2.0\r\n"
368 "CPE510(TP-LINK|EU|N300-5|55530000):2.0\r\n"
369 "CPE510(TP-LINK|UN|N300-5|00000000):2.0\r\n"
370 "CPE510(TP-LINK|UN|N300-5|45550000):2.0\r\n"
371 "CPE510(TP-LINK|UN|N300-5|55530000):2.0\r\n"
372 "CPE510(TP-LINK|US|N300-5|00000000):2.0\r\n"
373 "CPE510(TP-LINK|US|N300-5|45550000):2.0\r\n"
374 "CPE510(TP-LINK|US|N300-5|55530000):2.0\r\n"
375 "CPE510(TP-LINK|UN|N300-5):2.0\r\n"
376 "CPE510(TP-LINK|EU|N300-5):2.0\r\n"
377 "CPE510(TP-LINK|US|N300-5):2.0\r\n",
378 .support_trail
= '\xff',
382 {"fs-uboot", 0x00000, 0x20000},
383 {"partition-table", 0x20000, 0x02000},
384 {"default-mac", 0x30000, 0x00020},
385 {"product-info", 0x31100, 0x00100},
386 {"signature", 0x32000, 0x00400},
387 {"os-image", 0x40000, 0x200000},
388 {"file-system", 0x240000, 0x570000},
389 {"soft-version", 0x7b0000, 0x00100},
390 {"support-list", 0x7b1000, 0x00400},
391 {"user-config", 0x7c0000, 0x10000},
392 {"default-config", 0x7d0000, 0x10000},
393 {"log", 0x7e0000, 0x10000},
394 {"radio", 0x7f0000, 0x10000},
398 .first_sysupgrade_partition
= "os-image",
399 .last_sysupgrade_partition
= "support-list",
402 /** Firmware layout for the CPE510 V3 */
405 .vendor
= "CPE510(TP-LINK|UN|N300-5):3.0\r\n",
408 "CPE510(TP-LINK|EU|N300-5|00000000):3.0\r\n"
409 "CPE510(TP-LINK|EU|N300-5|45550000):3.0\r\n"
410 "CPE510(TP-LINK|EU|N300-5|55530000):3.0\r\n"
411 "CPE510(TP-LINK|UN|N300-5|00000000):3.0\r\n"
412 "CPE510(TP-LINK|UN|N300-5|45550000):3.0\r\n"
413 "CPE510(TP-LINK|UN|N300-5|55530000):3.0\r\n"
414 "CPE510(TP-LINK|US|N300-5|00000000):3.0\r\n"
415 "CPE510(TP-LINK|US|N300-5|45550000):3.0\r\n"
416 "CPE510(TP-LINK|US|N300-5|55530000):3.0\r\n"
417 "CPE510(TP-LINK|UN|N300-5):3.0\r\n"
418 "CPE510(TP-LINK|EU|N300-5):3.0\r\n"
419 "CPE510(TP-LINK|US|N300-5):3.0\r\n",
420 .support_trail
= '\xff',
424 {"fs-uboot", 0x00000, 0x20000},
425 {"partition-table", 0x20000, 0x02000},
426 {"default-mac", 0x30000, 0x00020},
427 {"product-info", 0x31100, 0x00100},
428 {"signature", 0x32000, 0x00400},
429 {"os-image", 0x40000, 0x200000},
430 {"file-system", 0x240000, 0x570000},
431 {"soft-version", 0x7b0000, 0x00100},
432 {"support-list", 0x7b1000, 0x00400},
433 {"user-config", 0x7c0000, 0x10000},
434 {"default-config", 0x7d0000, 0x10000},
435 {"log", 0x7e0000, 0x10000},
436 {"radio", 0x7f0000, 0x10000},
440 .first_sysupgrade_partition
= "os-image",
441 .last_sysupgrade_partition
= "support-list",
444 /** Firmware layout for the CPE610V1 */
447 .vendor
= "CPE610(TP-LINK|UN|N300-5|00000000):1.0\r\n",
450 "CPE610(TP-LINK|EU|N300-5|00000000):1.0\r\n"
451 "CPE610(TP-LINK|EU|N300-5|45550000):1.0\r\n"
452 "CPE610(TP-LINK|EU|N300-5|55530000):1.0\r\n"
453 "CPE610(TP-LINK|UN|N300-5|00000000):1.0\r\n"
454 "CPE610(TP-LINK|UN|N300-5|45550000):1.0\r\n"
455 "CPE610(TP-LINK|UN|N300-5|55530000):1.0\r\n"
456 "CPE610(TP-LINK|US|N300-5|55530000):1.0\r\n"
457 "CPE610(TP-LINK|UN|N300-5):1.0\r\n"
458 "CPE610(TP-LINK|EU|N300-5):1.0\r\n"
459 "CPE610(TP-LINK|US|N300-5):1.0\r\n",
460 .support_trail
= '\xff',
464 {"fs-uboot", 0x00000, 0x20000},
465 {"partition-table", 0x20000, 0x02000},
466 {"default-mac", 0x30000, 0x00020},
467 {"product-info", 0x31100, 0x00100},
468 {"signature", 0x32000, 0x00400},
469 {"os-image", 0x40000, 0x200000},
470 {"file-system", 0x240000, 0x570000},
471 {"soft-version", 0x7b0000, 0x00100},
472 {"support-list", 0x7b1000, 0x00400},
473 {"user-config", 0x7c0000, 0x10000},
474 {"default-config", 0x7d0000, 0x10000},
475 {"log", 0x7e0000, 0x10000},
476 {"radio", 0x7f0000, 0x10000},
480 .first_sysupgrade_partition
= "os-image",
481 .last_sysupgrade_partition
= "support-list",
484 /** Firmware layout for the CPE610V2 */
487 .vendor
= "CPE610(TP-LINK|UN|N300-5|00000000):2.0\r\n",
490 "CPE610(TP-LINK|EU|N300-5|00000000):2.0\r\n"
491 "CPE610(TP-LINK|EU|N300-5|45550000):2.0\r\n"
492 "CPE610(TP-LINK|EU|N300-5|55530000):2.0\r\n"
493 "CPE610(TP-LINK|UN|N300-5|00000000):2.0\r\n"
494 "CPE610(TP-LINK|UN|N300-5|45550000):2.0\r\n"
495 "CPE610(TP-LINK|UN|N300-5|55530000):2.0\r\n"
496 "CPE610(TP-LINK|US|N300-5|55530000):2.0\r\n"
497 "CPE610(TP-LINK|UN|N300-5):2.0\r\n"
498 "CPE610(TP-LINK|EU|N300-5):2.0\r\n"
499 "CPE610(TP-LINK|US|N300-5):2.0\r\n",
500 .support_trail
= '\xff',
504 {"fs-uboot", 0x00000, 0x20000},
505 {"partition-table", 0x20000, 0x02000},
506 {"default-mac", 0x30000, 0x00020},
507 {"product-info", 0x31100, 0x00100},
508 {"signature", 0x32000, 0x00400},
509 {"os-image", 0x40000, 0x200000},
510 {"file-system", 0x240000, 0x570000},
511 {"soft-version", 0x7b0000, 0x00100},
512 {"support-list", 0x7b1000, 0x00400},
513 {"user-config", 0x7c0000, 0x10000},
514 {"default-config", 0x7d0000, 0x10000},
515 {"log", 0x7e0000, 0x10000},
516 {"radio", 0x7f0000, 0x10000},
520 .first_sysupgrade_partition
= "os-image",
521 .last_sysupgrade_partition
= "support-list",
526 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
529 "WBS210(TP-LINK|UN|N300-2):1.20\r\n"
530 "WBS210(TP-LINK|US|N300-2):1.20\r\n"
531 "WBS210(TP-LINK|EU|N300-2):1.20\r\n",
532 .support_trail
= '\xff',
536 {"fs-uboot", 0x00000, 0x20000},
537 {"partition-table", 0x20000, 0x02000},
538 {"default-mac", 0x30000, 0x00020},
539 {"product-info", 0x31100, 0x00100},
540 {"signature", 0x32000, 0x00400},
541 {"os-image", 0x40000, 0x200000},
542 {"file-system", 0x240000, 0x570000},
543 {"soft-version", 0x7b0000, 0x00100},
544 {"support-list", 0x7b1000, 0x00400},
545 {"user-config", 0x7c0000, 0x10000},
546 {"default-config", 0x7d0000, 0x10000},
547 {"log", 0x7e0000, 0x10000},
548 {"radio", 0x7f0000, 0x10000},
552 .first_sysupgrade_partition
= "os-image",
553 .last_sysupgrade_partition
= "support-list",
558 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
561 "WBS210(TP-LINK|UN|N300-2|00000000):2.0\r\n"
562 "WBS210(TP-LINK|US|N300-2|55530000):2.0\r\n"
563 "WBS210(TP-LINK|EU|N300-2|45550000):2.0\r\n",
564 .support_trail
= '\xff',
568 {"fs-uboot", 0x00000, 0x20000},
569 {"partition-table", 0x20000, 0x02000},
570 {"default-mac", 0x30000, 0x00020},
571 {"product-info", 0x31100, 0x00100},
572 {"signature", 0x32000, 0x00400},
573 {"os-image", 0x40000, 0x200000},
574 {"file-system", 0x240000, 0x570000},
575 {"soft-version", 0x7b0000, 0x00100},
576 {"support-list", 0x7b1000, 0x00400},
577 {"user-config", 0x7c0000, 0x10000},
578 {"default-config", 0x7d0000, 0x10000},
579 {"log", 0x7e0000, 0x10000},
580 {"radio", 0x7f0000, 0x10000},
584 .first_sysupgrade_partition
= "os-image",
585 .last_sysupgrade_partition
= "support-list",
590 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
593 "WBS510(TP-LINK|UN|N300-5):1.20\r\n"
594 "WBS510(TP-LINK|US|N300-5):1.20\r\n"
595 "WBS510(TP-LINK|EU|N300-5):1.20\r\n"
596 "WBS510(TP-LINK|CA|N300-5):1.20\r\n",
597 .support_trail
= '\xff',
601 {"fs-uboot", 0x00000, 0x20000},
602 {"partition-table", 0x20000, 0x02000},
603 {"default-mac", 0x30000, 0x00020},
604 {"product-info", 0x31100, 0x00100},
605 {"signature", 0x32000, 0x00400},
606 {"os-image", 0x40000, 0x200000},
607 {"file-system", 0x240000, 0x570000},
608 {"soft-version", 0x7b0000, 0x00100},
609 {"support-list", 0x7b1000, 0x00400},
610 {"user-config", 0x7c0000, 0x10000},
611 {"default-config", 0x7d0000, 0x10000},
612 {"log", 0x7e0000, 0x10000},
613 {"radio", 0x7f0000, 0x10000},
617 .first_sysupgrade_partition
= "os-image",
618 .last_sysupgrade_partition
= "support-list",
623 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
626 "WBS510(TP-LINK|UN|N300-5|00000000):2.0\r\n"
627 "WBS510(TP-LINK|US|N300-5|55530000):2.0\r\n"
628 "WBS510(TP-LINK|EU|N300-5|45550000):2.0\r\n"
629 "WBS510(TP-LINK|CA|N300-5|43410000):2.0\r\n",
630 .support_trail
= '\xff',
634 {"fs-uboot", 0x00000, 0x20000},
635 {"partition-table", 0x20000, 0x02000},
636 {"default-mac", 0x30000, 0x00020},
637 {"product-info", 0x31100, 0x00100},
638 {"signature", 0x32000, 0x00400},
639 {"os-image", 0x40000, 0x200000},
640 {"file-system", 0x240000, 0x570000},
641 {"soft-version", 0x7b0000, 0x00100},
642 {"support-list", 0x7b1000, 0x00400},
643 {"user-config", 0x7c0000, 0x10000},
644 {"default-config", 0x7d0000, 0x10000},
645 {"log", 0x7e0000, 0x10000},
646 {"radio", 0x7f0000, 0x10000},
650 .first_sysupgrade_partition
= "os-image",
651 .last_sysupgrade_partition
= "support-list",
654 /** Firmware layout for the C2600 */
660 "{product_name:Archer C2600,product_ver:1.0.0,special_id:00000000}\r\n",
661 .support_trail
= '\x00',
665 We use a bigger os-image partition than the stock images (and thus
666 smaller file-system), as our kernel doesn't fit in the stock firmware's
667 2 MB os-image since kernel 4.14.
670 {"SBL1", 0x00000, 0x20000},
671 {"MIBIB", 0x20000, 0x20000},
672 {"SBL2", 0x40000, 0x20000},
673 {"SBL3", 0x60000, 0x30000},
674 {"DDRCONFIG", 0x90000, 0x10000},
675 {"SSD", 0xa0000, 0x10000},
676 {"TZ", 0xb0000, 0x30000},
677 {"RPM", 0xe0000, 0x20000},
678 {"fs-uboot", 0x100000, 0x70000},
679 {"uboot-env", 0x170000, 0x40000},
680 {"radio", 0x1b0000, 0x40000},
681 {"os-image", 0x1f0000, 0x400000}, /* Stock: base 0x1f0000 size 0x200000 */
682 {"file-system", 0x5f0000, 0x1900000}, /* Stock: base 0x3f0000 size 0x1b00000 */
683 {"default-mac", 0x1ef0000, 0x00200},
684 {"pin", 0x1ef0200, 0x00200},
685 {"product-info", 0x1ef0400, 0x0fc00},
686 {"partition-table", 0x1f00000, 0x10000},
687 {"soft-version", 0x1f10000, 0x10000},
688 {"support-list", 0x1f20000, 0x10000},
689 {"profile", 0x1f30000, 0x10000},
690 {"default-config", 0x1f40000, 0x10000},
691 {"user-config", 0x1f50000, 0x40000},
692 {"qos-db", 0x1f90000, 0x40000},
693 {"usb-config", 0x1fd0000, 0x10000},
694 {"log", 0x1fe0000, 0x20000},
698 .first_sysupgrade_partition
= "os-image",
699 .last_sysupgrade_partition
= "file-system"
702 /** Firmware layout for the A7-V5 */
704 .id
= "ARCHER-A7-V5",
707 "{product_name:Archer A7,product_ver:5.0.0,special_id:45550000}\n"
708 "{product_name:Archer A7,product_ver:5.0.0,special_id:55530000}\n"
709 "{product_name:Archer A7,product_ver:5.0.0,special_id:43410000}\n"
710 "{product_name:Archer A7,product_ver:5.0.0,special_id:4A500000}\n"
711 "{product_name:Archer A7,product_ver:5.0.0,special_id:54570000}\n",
712 .support_trail
= '\x00',
713 .soft_ver
= "soft_ver:1.0.0\n",
715 /* We're using a dynamic kernel/rootfs split here */
717 {"factory-boot", 0x00000, 0x20000},
718 {"fs-uboot", 0x20000, 0x20000},
719 {"firmware", 0x40000, 0xec0000}, /* Stock: name os-image base 0x40000 size 0x120000 */
720 /* Stock: name file-system base 0x160000 size 0xda0000 */
721 {"default-mac", 0xf40000, 0x00200},
722 {"pin", 0xf40200, 0x00200},
723 {"device-id", 0xf40400, 0x00100},
724 {"product-info", 0xf40500, 0x0fb00},
725 {"soft-version", 0xf50000, 0x00100},
726 {"extra-para", 0xf51000, 0x01000},
727 {"support-list", 0xf52000, 0x0a000},
728 {"profile", 0xf5c000, 0x04000},
729 {"default-config", 0xf60000, 0x10000},
730 {"user-config", 0xf70000, 0x40000},
731 {"certificate", 0xfb0000, 0x10000},
732 {"partition-table", 0xfc0000, 0x10000},
733 {"log", 0xfd0000, 0x20000},
734 {"radio", 0xff0000, 0x10000},
738 .first_sysupgrade_partition
= "os-image",
739 .last_sysupgrade_partition
= "file-system",
742 /** Firmware layout for the C2v3 */
744 .id
= "ARCHER-C2-V3",
747 "{product_name:ArcherC2,product_ver:3.0.0,special_id:00000000}\n"
748 "{product_name:ArcherC2,product_ver:3.0.0,special_id:55530000}\n"
749 "{product_name:ArcherC2,product_ver:3.0.0,special_id:45550000}\n",
750 .support_trail
= '\x00',
751 .soft_ver
= "soft_ver:3.0.1\n",
753 /** We're using a dynamic kernel/rootfs split here */
756 {"factory-boot", 0x00000, 0x20000},
757 {"fs-uboot", 0x20000, 0x10000},
758 {"firmware", 0x30000, 0x7a0000},
759 {"user-config", 0x7d0000, 0x04000},
760 {"default-mac", 0x7e0000, 0x00100},
761 {"device-id", 0x7e0100, 0x00100},
762 {"extra-para", 0x7e0200, 0x00100},
763 {"pin", 0x7e0300, 0x00100},
764 {"support-list", 0x7e0400, 0x00400},
765 {"soft-version", 0x7e0800, 0x00400},
766 {"product-info", 0x7e0c00, 0x01400},
767 {"partition-table", 0x7e2000, 0x01000},
768 {"profile", 0x7e3000, 0x01000},
769 {"default-config", 0x7e4000, 0x04000},
770 {"merge-config", 0x7ec000, 0x02000},
771 {"qos-db", 0x7ee000, 0x02000},
772 {"radio", 0x7f0000, 0x10000},
776 .first_sysupgrade_partition
= "os-image",
777 .last_sysupgrade_partition
= "file-system",
780 /** Firmware layout for the C25v1 */
782 .id
= "ARCHER-C25-V1",
785 "{product_name:ArcherC25,product_ver:1.0.0,special_id:00000000}\n"
786 "{product_name:ArcherC25,product_ver:1.0.0,special_id:55530000}\n"
787 "{product_name:ArcherC25,product_ver:1.0.0,special_id:45550000}\n",
788 .support_trail
= '\x00',
789 .soft_ver
= "soft_ver:1.0.0\n",
791 /* We're using a dynamic kernel/rootfs split here */
793 {"factory-boot", 0x00000, 0x20000},
794 {"fs-uboot", 0x20000, 0x10000},
795 {"firmware", 0x30000, 0x7a0000}, /* Stock: name os-image base 0x30000 size 0x100000 */
796 /* Stock: name file-system base 0x130000 size 0x6a0000 */
797 {"user-config", 0x7d0000, 0x04000},
798 {"default-mac", 0x7e0000, 0x00100},
799 {"device-id", 0x7e0100, 0x00100},
800 {"extra-para", 0x7e0200, 0x00100},
801 {"pin", 0x7e0300, 0x00100},
802 {"support-list", 0x7e0400, 0x00400},
803 {"soft-version", 0x7e0800, 0x00400},
804 {"product-info", 0x7e0c00, 0x01400},
805 {"partition-table", 0x7e2000, 0x01000},
806 {"profile", 0x7e3000, 0x01000},
807 {"default-config", 0x7e4000, 0x04000},
808 {"merge-config", 0x7ec000, 0x02000},
809 {"qos-db", 0x7ee000, 0x02000},
810 {"radio", 0x7f0000, 0x10000},
814 .first_sysupgrade_partition
= "os-image",
815 .last_sysupgrade_partition
= "file-system",
818 /** Firmware layout for the C58v1 */
820 .id
= "ARCHER-C58-V1",
824 "{product_name:Archer C58,product_ver:1.0.0,special_id:00000000}\r\n"
825 "{product_name:Archer C58,product_ver:1.0.0,special_id:45550000}\r\n"
826 "{product_name:Archer C58,product_ver:1.0.0,special_id:55530000}\r\n",
827 .support_trail
= '\x00',
828 .soft_ver
= "soft_ver:1.0.0\n",
831 {"fs-uboot", 0x00000, 0x10000},
832 {"default-mac", 0x10000, 0x00200},
833 {"pin", 0x10200, 0x00200},
834 {"product-info", 0x10400, 0x00100},
835 {"partition-table", 0x10500, 0x00800},
836 {"soft-version", 0x11300, 0x00200},
837 {"support-list", 0x11500, 0x00100},
838 {"device-id", 0x11600, 0x00100},
839 {"profile", 0x11700, 0x03900},
840 {"default-config", 0x15000, 0x04000},
841 {"user-config", 0x19000, 0x04000},
842 {"firmware", 0x20000, 0x7c8000},
843 {"certyficate", 0x7e8000, 0x08000},
844 {"radio", 0x7f0000, 0x10000},
848 .first_sysupgrade_partition
= "os-image",
849 .last_sysupgrade_partition
= "file-system",
852 /** Firmware layout for the C59v1 */
854 .id
= "ARCHER-C59-V1",
858 "{product_name:Archer C59,product_ver:1.0.0,special_id:00000000}\r\n"
859 "{product_name:Archer C59,product_ver:1.0.0,special_id:45550000}\r\n"
860 "{product_name:Archer C59,product_ver:1.0.0,special_id:52550000}\r\n"
861 "{product_name:Archer C59,product_ver:1.0.0,special_id:55530000}\r\n",
862 .support_trail
= '\x00',
863 .soft_ver
= "soft_ver:1.0.0\n",
865 /* We're using a dynamic kernel/rootfs split here */
867 {"fs-uboot", 0x00000, 0x10000},
868 {"default-mac", 0x10000, 0x00200},
869 {"pin", 0x10200, 0x00200},
870 {"device-id", 0x10400, 0x00100},
871 {"product-info", 0x10500, 0x0fb00},
872 {"firmware", 0x20000, 0xe30000},
873 {"partition-table", 0xe50000, 0x10000},
874 {"soft-version", 0xe60000, 0x10000},
875 {"support-list", 0xe70000, 0x10000},
876 {"profile", 0xe80000, 0x10000},
877 {"default-config", 0xe90000, 0x10000},
878 {"user-config", 0xea0000, 0x40000},
879 {"usb-config", 0xee0000, 0x10000},
880 {"certificate", 0xef0000, 0x10000},
881 {"qos-db", 0xf00000, 0x40000},
882 {"log", 0xfe0000, 0x10000},
883 {"radio", 0xff0000, 0x10000},
887 .first_sysupgrade_partition
= "os-image",
888 .last_sysupgrade_partition
= "file-system",
891 /** Firmware layout for the C59v2 */
893 .id
= "ARCHER-C59-V2",
897 "{product_name:Archer C59,product_ver:2.0.0,special_id:00000000}\r\n"
898 "{product_name:Archer C59,product_ver:2.0.0,special_id:45550000}\r\n"
899 "{product_name:Archer C59,product_ver:2.0.0,special_id:55530000}\r\n",
900 .support_trail
= '\x00',
901 .soft_ver
= "soft_ver:2.0.0 Build 20161206 rel.7303\n",
903 /** We're using a dynamic kernel/rootfs split here */
905 {"factory-boot", 0x00000, 0x20000},
906 {"fs-uboot", 0x20000, 0x10000},
907 {"default-mac", 0x30000, 0x00200},
908 {"pin", 0x30200, 0x00200},
909 {"device-id", 0x30400, 0x00100},
910 {"product-info", 0x30500, 0x0fb00},
911 {"firmware", 0x40000, 0xe10000},
912 {"partition-table", 0xe50000, 0x10000},
913 {"soft-version", 0xe60000, 0x10000},
914 {"support-list", 0xe70000, 0x10000},
915 {"profile", 0xe80000, 0x10000},
916 {"default-config", 0xe90000, 0x10000},
917 {"user-config", 0xea0000, 0x40000},
918 {"usb-config", 0xee0000, 0x10000},
919 {"certificate", 0xef0000, 0x10000},
920 {"extra-para", 0xf00000, 0x10000},
921 {"qos-db", 0xf10000, 0x30000},
922 {"log", 0xfe0000, 0x10000},
923 {"radio", 0xff0000, 0x10000},
927 .first_sysupgrade_partition
= "os-image",
928 .last_sysupgrade_partition
= "file-system",
931 /** Firmware layout for the Archer C6 v2 (EU/RU/JP) */
933 .id
= "ARCHER-C6-V2",
937 "{product_name:Archer C6,product_ver:2.0.0,special_id:45550000}\r\n"
938 "{product_name:Archer C6,product_ver:2.0.0,special_id:52550000}\r\n"
939 "{product_name:Archer C6,product_ver:2.0.0,special_id:4A500000}\r\n",
940 .support_trail
= '\x00',
941 .soft_ver
= "soft_ver:1.2.1\n",
944 {"fs-uboot", 0x00000, 0x20000},
945 {"default-mac", 0x20000, 0x00200},
946 {"pin", 0x20200, 0x00100},
947 {"product-info", 0x20300, 0x00200},
948 {"device-id", 0x20500, 0x0fb00},
949 {"firmware", 0x30000, 0x7a9400},
950 {"soft-version", 0x7d9400, 0x00100},
951 {"extra-para", 0x7d9500, 0x00100},
952 {"support-list", 0x7d9600, 0x00200},
953 {"profile", 0x7d9800, 0x03000},
954 {"default-config", 0x7dc800, 0x03000},
955 {"partition-table", 0x7df800, 0x00800},
956 {"user-config", 0x7e0000, 0x0c000},
957 {"certificate", 0x7ec000, 0x04000},
958 {"radio", 0x7f0000, 0x10000},
962 .first_sysupgrade_partition
= "os-image",
963 .last_sysupgrade_partition
= "file-system",
966 /** Firmware layout for the Archer C6 v2 (US) and A6 v2 (US/TW) */
968 .id
= "ARCHER-C6-V2-US",
972 "{product_name:Archer A6,product_ver:2.0.0,special_id:55530000}\n"
973 "{product_name:Archer A6,product_ver:2.0.0,special_id:54570000}\n"
974 "{product_name:Archer C6,product_ver:2.0.0,special_id:55530000}\n",
975 .support_trail
= '\x00',
976 .soft_ver
= "soft_ver:1.1.1\n",
979 {"factory-boot", 0x00000, 0x20000},
980 {"default-mac", 0x20000, 0x00200},
981 {"pin", 0x20200, 0x00100},
982 {"product-info", 0x20300, 0x00200},
983 {"device-id", 0x20500, 0x0fb00},
984 {"fs-uboot", 0x30000, 0x20000},
985 {"firmware", 0x50000, 0xf89400},
986 {"soft-version", 0xfd9400, 0x00100},
987 {"extra-para", 0xfd9500, 0x00100},
988 {"support-list", 0xfd9600, 0x00200},
989 {"profile", 0xfd9800, 0x03000},
990 {"default-config", 0xfdc800, 0x03000},
991 {"partition-table", 0xfdf800, 0x00800},
992 {"user-config", 0xfe0000, 0x0c000},
993 {"certificate", 0xfec000, 0x04000},
994 {"radio", 0xff0000, 0x10000},
997 .first_sysupgrade_partition
= "os-image",
998 .last_sysupgrade_partition
= "file-system",
1001 /** Firmware layout for the C60v1 */
1003 .id
= "ARCHER-C60-V1",
1007 "{product_name:Archer C60,product_ver:1.0.0,special_id:00000000}\r\n"
1008 "{product_name:Archer C60,product_ver:1.0.0,special_id:45550000}\r\n"
1009 "{product_name:Archer C60,product_ver:1.0.0,special_id:55530000}\r\n",
1010 .support_trail
= '\x00',
1011 .soft_ver
= "soft_ver:1.0.0\n",
1014 {"fs-uboot", 0x00000, 0x10000},
1015 {"default-mac", 0x10000, 0x00200},
1016 {"pin", 0x10200, 0x00200},
1017 {"product-info", 0x10400, 0x00100},
1018 {"partition-table", 0x10500, 0x00800},
1019 {"soft-version", 0x11300, 0x00200},
1020 {"support-list", 0x11500, 0x00100},
1021 {"device-id", 0x11600, 0x00100},
1022 {"profile", 0x11700, 0x03900},
1023 {"default-config", 0x15000, 0x04000},
1024 {"user-config", 0x19000, 0x04000},
1025 {"firmware", 0x20000, 0x7c8000},
1026 {"certyficate", 0x7e8000, 0x08000},
1027 {"radio", 0x7f0000, 0x10000},
1031 .first_sysupgrade_partition
= "os-image",
1032 .last_sysupgrade_partition
= "file-system",
1035 /** Firmware layout for the C60v2 */
1037 .id
= "ARCHER-C60-V2",
1041 "{product_name:Archer C60,product_ver:2.0.0,special_id:42520000}\r\n"
1042 "{product_name:Archer C60,product_ver:2.0.0,special_id:45550000}\r\n"
1043 "{product_name:Archer C60,product_ver:2.0.0,special_id:55530000}\r\n",
1044 .support_trail
= '\x00',
1045 .soft_ver
= "soft_ver:2.0.0\n",
1048 {"factory-boot", 0x00000, 0x1fb00},
1049 {"default-mac", 0x1fb00, 0x00200},
1050 {"pin", 0x1fd00, 0x00100},
1051 {"product-info", 0x1fe00, 0x00100},
1052 {"device-id", 0x1ff00, 0x00100},
1053 {"fs-uboot", 0x20000, 0x10000},
1054 {"firmware", 0x30000, 0x7a0000},
1055 {"soft-version", 0x7d9500, 0x00100},
1056 {"support-list", 0x7d9600, 0x00100},
1057 {"extra-para", 0x7d9700, 0x00100},
1058 {"profile", 0x7d9800, 0x03000},
1059 {"default-config", 0x7dc800, 0x03000},
1060 {"partition-table", 0x7df800, 0x00800},
1061 {"user-config", 0x7e0000, 0x0c000},
1062 {"certificate", 0x7ec000, 0x04000},
1063 {"radio", 0x7f0000, 0x10000},
1067 .first_sysupgrade_partition
= "os-image",
1068 .last_sysupgrade_partition
= "file-system",
1071 /** Firmware layout for the C60v3 */
1073 .id
= "ARCHER-C60-V3",
1077 "{product_name:Archer C60,product_ver:3.0.0,special_id:42520000}\r\n"
1078 "{product_name:Archer C60,product_ver:3.0.0,special_id:45550000}\r\n"
1079 "{product_name:Archer C60,product_ver:3.0.0,special_id:55530000}\r\n",
1080 .support_trail
= '\x00',
1081 .soft_ver
= "soft_ver:3.0.0\n",
1084 {"factory-boot", 0x00000, 0x1fb00},
1085 {"default-mac", 0x1fb00, 0x00200},
1086 {"pin", 0x1fd00, 0x00100},
1087 {"product-info", 0x1fe00, 0x00100},
1088 {"device-id", 0x1ff00, 0x00100},
1089 {"fs-uboot", 0x20000, 0x10000},
1090 {"firmware", 0x30000, 0x7a0000},
1091 {"soft-version", 0x7d9500, 0x00100},
1092 {"support-list", 0x7d9600, 0x00100},
1093 {"extra-para", 0x7d9700, 0x00100},
1094 {"profile", 0x7d9800, 0x03000},
1095 {"default-config", 0x7dc800, 0x03000},
1096 {"partition-table", 0x7df800, 0x00800},
1097 {"user-config", 0x7e0000, 0x0c000},
1098 {"certificate", 0x7ec000, 0x04000},
1099 {"radio", 0x7f0000, 0x10000},
1103 .first_sysupgrade_partition
= "os-image",
1104 .last_sysupgrade_partition
= "file-system",
1107 /** Firmware layout for the C5 */
1109 .id
= "ARCHER-C5-V2",
1113 "{product_name:ArcherC5,product_ver:2.0.0,special_id:00000000}\r\n"
1114 "{product_name:ArcherC5,product_ver:2.0.0,special_id:55530000}\r\n"
1115 "{product_name:ArcherC5,product_ver:2.0.0,special_id:4A500000}\r\n", /* JP version */
1116 .support_trail
= '\x00',
1120 {"fs-uboot", 0x00000, 0x40000},
1121 {"os-image", 0x40000, 0x200000},
1122 {"file-system", 0x240000, 0xc00000},
1123 {"default-mac", 0xe40000, 0x00200},
1124 {"pin", 0xe40200, 0x00200},
1125 {"product-info", 0xe40400, 0x00200},
1126 {"partition-table", 0xe50000, 0x10000},
1127 {"soft-version", 0xe60000, 0x00200},
1128 {"support-list", 0xe61000, 0x0f000},
1129 {"profile", 0xe70000, 0x10000},
1130 {"default-config", 0xe80000, 0x10000},
1131 {"user-config", 0xe90000, 0x50000},
1132 {"log", 0xee0000, 0x100000},
1133 {"radio_bk", 0xfe0000, 0x10000},
1134 {"radio", 0xff0000, 0x10000},
1138 .first_sysupgrade_partition
= "os-image",
1139 .last_sysupgrade_partition
= "file-system"
1142 /** Firmware layout for the C7 */
1144 .id
= "ARCHER-C7-V4",
1147 "{product_name:Archer C7,product_ver:4.0.0,special_id:00000000}\n"
1148 "{product_name:Archer C7,product_ver:4.0.0,special_id:41550000}\n"
1149 "{product_name:Archer C7,product_ver:4.0.0,special_id:45550000}\n"
1150 "{product_name:Archer C7,product_ver:4.0.0,special_id:4B520000}\n"
1151 "{product_name:Archer C7,product_ver:4.0.0,special_id:42520000}\n"
1152 "{product_name:Archer C7,product_ver:4.0.0,special_id:4A500000}\n"
1153 "{product_name:Archer C7,product_ver:4.0.0,special_id:52550000}\n"
1154 "{product_name:Archer C7,product_ver:4.0.0,special_id:54570000}\n"
1155 "{product_name:Archer C7,product_ver:4.0.0,special_id:55530000}\n"
1156 "{product_name:Archer C7,product_ver:4.0.0,special_id:43410000}\n",
1157 .support_trail
= '\x00',
1158 .soft_ver
= "soft_ver:1.0.0\n",
1160 /* We're using a dynamic kernel/rootfs split here */
1162 {"factory-boot", 0x00000, 0x20000},
1163 {"fs-uboot", 0x20000, 0x20000},
1164 {"firmware", 0x40000, 0xEC0000}, /* Stock: name os-image base 0x40000 size 0x120000 */
1165 /* Stock: name file-system base 0x160000 size 0xda0000 */
1166 {"default-mac", 0xf00000, 0x00200},
1167 {"pin", 0xf00200, 0x00200},
1168 {"device-id", 0xf00400, 0x00100},
1169 {"product-info", 0xf00500, 0x0fb00},
1170 {"soft-version", 0xf10000, 0x00100},
1171 {"extra-para", 0xf11000, 0x01000},
1172 {"support-list", 0xf12000, 0x0a000},
1173 {"profile", 0xf1c000, 0x04000},
1174 {"default-config", 0xf20000, 0x10000},
1175 {"user-config", 0xf30000, 0x40000},
1176 {"qos-db", 0xf70000, 0x40000},
1177 {"certificate", 0xfb0000, 0x10000},
1178 {"partition-table", 0xfc0000, 0x10000},
1179 {"log", 0xfd0000, 0x20000},
1180 {"radio", 0xff0000, 0x10000},
1184 .first_sysupgrade_partition
= "os-image",
1185 .last_sysupgrade_partition
= "file-system",
1188 /** Firmware layout for the C7 v5*/
1190 .id
= "ARCHER-C7-V5",
1193 "{product_name:Archer C7,product_ver:5.0.0,special_id:00000000}\n"
1194 "{product_name:Archer C7,product_ver:5.0.0,special_id:45550000}\n"
1195 "{product_name:Archer C7,product_ver:5.0.0,special_id:55530000}\n"
1196 "{product_name:Archer C7,product_ver:5.0.0,special_id:43410000}\n"
1197 "{product_name:Archer C7,product_ver:5.0.0,special_id:4A500000}\n"
1198 "{product_name:Archer C7,product_ver:5.0.0,special_id:54570000}\n"
1199 "{product_name:Archer C7,product_ver:5.0.0,special_id:52550000}\n"
1200 "{product_name:Archer C7,product_ver:5.0.0,special_id:4B520000}\n",
1202 .support_trail
= '\x00',
1203 .soft_ver
= "soft_ver:1.0.0\n",
1205 /* We're using a dynamic kernel/rootfs split here */
1207 {"factory-boot", 0x00000, 0x20000},
1208 {"fs-uboot", 0x20000, 0x20000},
1209 {"partition-table", 0x40000, 0x10000},
1210 {"radio", 0x50000, 0x10000},
1211 {"default-mac", 0x60000, 0x00200},
1212 {"pin", 0x60200, 0x00200},
1213 {"device-id", 0x60400, 0x00100},
1214 {"product-info", 0x60500, 0x0fb00},
1215 {"soft-version", 0x70000, 0x01000},
1216 {"extra-para", 0x71000, 0x01000},
1217 {"support-list", 0x72000, 0x0a000},
1218 {"profile", 0x7c000, 0x04000},
1219 {"user-config", 0x80000, 0x40000},
1222 {"firmware", 0xc0000, 0xf00000}, /* Stock: name os-image base 0xc0000 size 0x120000 */
1223 /* Stock: name file-system base 0x1e0000 size 0xde0000 */
1225 {"log", 0xfc0000, 0x20000},
1226 {"certificate", 0xfe0000, 0x10000},
1227 {"default-config", 0xff0000, 0x10000},
1232 .first_sysupgrade_partition
= "os-image",
1233 .last_sysupgrade_partition
= "file-system",
1236 /** Firmware layout for the C9 */
1242 "{product_name:ArcherC9,"
1243 "product_ver:1.0.0,"
1244 "special_id:00000000}\n",
1245 .support_trail
= '\x00',
1249 {"fs-uboot", 0x00000, 0x40000},
1250 {"os-image", 0x40000, 0x200000},
1251 {"file-system", 0x240000, 0xc00000},
1252 {"default-mac", 0xe40000, 0x00200},
1253 {"pin", 0xe40200, 0x00200},
1254 {"product-info", 0xe40400, 0x00200},
1255 {"partition-table", 0xe50000, 0x10000},
1256 {"soft-version", 0xe60000, 0x00200},
1257 {"support-list", 0xe61000, 0x0f000},
1258 {"profile", 0xe70000, 0x10000},
1259 {"default-config", 0xe80000, 0x10000},
1260 {"user-config", 0xe90000, 0x50000},
1261 {"log", 0xee0000, 0x100000},
1262 {"radio_bk", 0xfe0000, 0x10000},
1263 {"radio", 0xff0000, 0x10000},
1267 .first_sysupgrade_partition
= "os-image",
1268 .last_sysupgrade_partition
= "file-system"
1271 /** Firmware layout for the EAP120 */
1274 .vendor
= "EAP120(TP-LINK|UN|N300-2):1.0\r\n",
1277 "EAP120(TP-LINK|UN|N300-2):1.0\r\n",
1278 .support_trail
= '\xff',
1282 {"fs-uboot", 0x00000, 0x20000},
1283 {"partition-table", 0x20000, 0x02000},
1284 {"default-mac", 0x30000, 0x00020},
1285 {"support-list", 0x31000, 0x00100},
1286 {"product-info", 0x31100, 0x00100},
1287 {"soft-version", 0x32000, 0x00100},
1288 {"os-image", 0x40000, 0x180000},
1289 {"file-system", 0x1c0000, 0x600000},
1290 {"user-config", 0x7c0000, 0x10000},
1291 {"backup-config", 0x7d0000, 0x10000},
1292 {"log", 0x7e0000, 0x10000},
1293 {"radio", 0x7f0000, 0x10000},
1297 .first_sysupgrade_partition
= "os-image",
1298 .last_sysupgrade_partition
= "file-system"
1301 /** Firmware layout for the TL-WA850RE v2 */
1303 .id
= "TLWA850REV2",
1307 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:55530000}\n"
1308 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:00000000}\n"
1309 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:55534100}\n"
1310 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:45550000}\n"
1311 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:4B520000}\n"
1312 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:42520000}\n"
1313 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:4A500000}\n"
1314 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:43410000}\n"
1315 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:41550000}\n"
1316 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:52550000}\n",
1317 .support_trail
= '\x00',
1321 576KB were moved from file-system to os-image
1322 in comparison to the stock image
1325 {"fs-uboot", 0x00000, 0x20000},
1326 {"firmware", 0x20000, 0x390000},
1327 {"partition-table", 0x3b0000, 0x02000},
1328 {"default-mac", 0x3c0000, 0x00020},
1329 {"pin", 0x3c0100, 0x00020},
1330 {"product-info", 0x3c1000, 0x01000},
1331 {"soft-version", 0x3c2000, 0x00100},
1332 {"support-list", 0x3c3000, 0x01000},
1333 {"profile", 0x3c4000, 0x08000},
1334 {"user-config", 0x3d0000, 0x10000},
1335 {"default-config", 0x3e0000, 0x10000},
1336 {"radio", 0x3f0000, 0x10000},
1340 .first_sysupgrade_partition
= "os-image",
1341 .last_sysupgrade_partition
= "file-system"
1344 /** Firmware layout for the TL-WA855RE v1 */
1346 .id
= "TLWA855REV1",
1350 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:00000000}\n"
1351 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:55530000}\n"
1352 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:45550000}\n"
1353 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:4B520000}\n"
1354 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:42520000}\n"
1355 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:4A500000}\n"
1356 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:43410000}\n"
1357 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:41550000}\n"
1358 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:52550000}\n",
1359 .support_trail
= '\x00',
1363 {"fs-uboot", 0x00000, 0x20000},
1364 {"os-image", 0x20000, 0x150000},
1365 {"file-system", 0x170000, 0x240000},
1366 {"partition-table", 0x3b0000, 0x02000},
1367 {"default-mac", 0x3c0000, 0x00020},
1368 {"pin", 0x3c0100, 0x00020},
1369 {"product-info", 0x3c1000, 0x01000},
1370 {"soft-version", 0x3c2000, 0x00100},
1371 {"support-list", 0x3c3000, 0x01000},
1372 {"profile", 0x3c4000, 0x08000},
1373 {"user-config", 0x3d0000, 0x10000},
1374 {"default-config", 0x3e0000, 0x10000},
1375 {"radio", 0x3f0000, 0x10000},
1379 .first_sysupgrade_partition
= "os-image",
1380 .last_sysupgrade_partition
= "file-system"
1383 /** Firmware layout for the TL-WR1043 v5 */
1385 .id
= "TLWR1043NV5",
1389 "{product_name:TL-WR1043N,product_ver:5.0.0,special_id:45550000}\n"
1390 "{product_name:TL-WR1043N,product_ver:5.0.0,special_id:55530000}\n",
1391 .support_trail
= '\x00',
1392 .soft_ver
= "soft_ver:1.0.0\n",
1394 {"factory-boot", 0x00000, 0x20000},
1395 {"fs-uboot", 0x20000, 0x20000},
1396 {"firmware", 0x40000, 0xec0000},
1397 {"default-mac", 0xf00000, 0x00200},
1398 {"pin", 0xf00200, 0x00200},
1399 {"device-id", 0xf00400, 0x00100},
1400 {"product-info", 0xf00500, 0x0fb00},
1401 {"soft-version", 0xf10000, 0x01000},
1402 {"extra-para", 0xf11000, 0x01000},
1403 {"support-list", 0xf12000, 0x0a000},
1404 {"profile", 0xf1c000, 0x04000},
1405 {"default-config", 0xf20000, 0x10000},
1406 {"user-config", 0xf30000, 0x40000},
1407 {"qos-db", 0xf70000, 0x40000},
1408 {"certificate", 0xfb0000, 0x10000},
1409 {"partition-table", 0xfc0000, 0x10000},
1410 {"log", 0xfd0000, 0x20000},
1411 {"radio", 0xff0000, 0x10000},
1414 .first_sysupgrade_partition
= "os-image",
1415 .last_sysupgrade_partition
= "file-system"
1418 /** Firmware layout for the TL-WR1043 v4 */
1420 .id
= "TLWR1043NDV4",
1424 "{product_name:TL-WR1043ND,product_ver:4.0.0,special_id:45550000}\n",
1425 .support_trail
= '\x00',
1428 /* We're using a dynamic kernel/rootfs split here */
1430 {"fs-uboot", 0x00000, 0x20000},
1431 {"firmware", 0x20000, 0xf30000},
1432 {"default-mac", 0xf50000, 0x00200},
1433 {"pin", 0xf50200, 0x00200},
1434 {"product-info", 0xf50400, 0x0fc00},
1435 {"soft-version", 0xf60000, 0x0b000},
1436 {"support-list", 0xf6b000, 0x04000},
1437 {"profile", 0xf70000, 0x04000},
1438 {"default-config", 0xf74000, 0x0b000},
1439 {"user-config", 0xf80000, 0x40000},
1440 {"partition-table", 0xfc0000, 0x10000},
1441 {"log", 0xfd0000, 0x20000},
1442 {"radio", 0xff0000, 0x10000},
1446 .first_sysupgrade_partition
= "os-image",
1447 .last_sysupgrade_partition
= "file-system"
1450 /** Firmware layout for the TL-WR902AC v1 */
1452 .id
= "TL-WR902AC-V1",
1456 "{product_name:TL-WR902AC,product_ver:1.0.0,special_id:45550000}\n"
1457 "{product_name:TL-WR902AC,product_ver:1.0.0,special_id:55530000}\n",
1458 .support_trail
= '\x00',
1462 384KB were moved from file-system to os-image
1463 in comparison to the stock image
1466 {"fs-uboot", 0x00000, 0x20000},
1467 {"firmware", 0x20000, 0x730000},
1468 {"default-mac", 0x750000, 0x00200},
1469 {"pin", 0x750200, 0x00200},
1470 {"product-info", 0x750400, 0x0fc00},
1471 {"soft-version", 0x760000, 0x0b000},
1472 {"support-list", 0x76b000, 0x04000},
1473 {"profile", 0x770000, 0x04000},
1474 {"default-config", 0x774000, 0x0b000},
1475 {"user-config", 0x780000, 0x40000},
1476 {"partition-table", 0x7c0000, 0x10000},
1477 {"log", 0x7d0000, 0x20000},
1478 {"radio", 0x7f0000, 0x10000},
1482 .first_sysupgrade_partition
= "os-image",
1483 .last_sysupgrade_partition
= "file-system",
1486 /** Firmware layout for the TL-WR942N V1 */
1492 "{product_name:TL-WR942N,product_ver:1.0.0,special_id:00000000}\r\n"
1493 "{product_name:TL-WR942N,product_ver:1.0.0,special_id:52550000}\r\n",
1494 .support_trail
= '\x00',
1498 {"fs-uboot", 0x00000, 0x20000},
1499 {"firmware", 0x20000, 0xe20000},
1500 {"default-mac", 0xe40000, 0x00200},
1501 {"pin", 0xe40200, 0x00200},
1502 {"product-info", 0xe40400, 0x0fc00},
1503 {"partition-table", 0xe50000, 0x10000},
1504 {"soft-version", 0xe60000, 0x10000},
1505 {"support-list", 0xe70000, 0x10000},
1506 {"profile", 0xe80000, 0x10000},
1507 {"default-config", 0xe90000, 0x10000},
1508 {"user-config", 0xea0000, 0x40000},
1509 {"qos-db", 0xee0000, 0x40000},
1510 {"certificate", 0xf20000, 0x10000},
1511 {"usb-config", 0xfb0000, 0x10000},
1512 {"log", 0xfc0000, 0x20000},
1513 {"radio-bk", 0xfe0000, 0x10000},
1514 {"radio", 0xff0000, 0x10000},
1518 .first_sysupgrade_partition
= "os-image",
1519 .last_sysupgrade_partition
= "file-system",
1522 /** Firmware layout for the RE200 v2 */
1528 "{product_name:RE200,product_ver:2.0.0,special_id:00000000}\n"
1529 "{product_name:RE200,product_ver:2.0.0,special_id:41520000}\n"
1530 "{product_name:RE200,product_ver:2.0.0,special_id:41550000}\n"
1531 "{product_name:RE200,product_ver:2.0.0,special_id:42520000}\n"
1532 "{product_name:RE200,product_ver:2.0.0,special_id:43410000}\n"
1533 "{product_name:RE200,product_ver:2.0.0,special_id:45530000}\n"
1534 "{product_name:RE200,product_ver:2.0.0,special_id:45550000}\n"
1535 "{product_name:RE200,product_ver:2.0.0,special_id:49440000}\n"
1536 "{product_name:RE200,product_ver:2.0.0,special_id:4a500000}\n"
1537 "{product_name:RE200,product_ver:2.0.0,special_id:4b520000}\n"
1538 "{product_name:RE200,product_ver:2.0.0,special_id:52550000}\n"
1539 "{product_name:RE200,product_ver:2.0.0,special_id:54570000}\n"
1540 "{product_name:RE200,product_ver:2.0.0,special_id:55530000}\n",
1541 .support_trail
= '\x00',
1545 {"fs-uboot", 0x00000, 0x20000},
1546 {"firmware", 0x20000, 0x7a0000},
1547 {"partition-table", 0x7c0000, 0x02000},
1548 {"default-mac", 0x7c2000, 0x00020},
1549 {"pin", 0x7c2100, 0x00020},
1550 {"product-info", 0x7c3100, 0x01000},
1551 {"soft-version", 0x7c4200, 0x01000},
1552 {"support-list", 0x7c5200, 0x01000},
1553 {"profile", 0x7c6200, 0x08000},
1554 {"config-info", 0x7ce200, 0x00400},
1555 {"user-config", 0x7d0000, 0x10000},
1556 {"default-config", 0x7e0000, 0x10000},
1557 {"radio", 0x7f0000, 0x10000},
1561 .first_sysupgrade_partition
= "os-image",
1562 .last_sysupgrade_partition
= "file-system"
1565 /** Firmware layout for the RE200 v3 */
1571 "{product_name:RE200,product_ver:3.0.0,special_id:00000000}\n"
1572 "{product_name:RE200,product_ver:3.0.0,special_id:41520000}\n"
1573 "{product_name:RE200,product_ver:3.0.0,special_id:41550000}\n"
1574 "{product_name:RE200,product_ver:3.0.0,special_id:42520000}\n"
1575 "{product_name:RE200,product_ver:3.0.0,special_id:43410000}\n"
1576 "{product_name:RE200,product_ver:3.0.0,special_id:45470000}\n"
1577 "{product_name:RE200,product_ver:3.0.0,special_id:45530000}\n"
1578 "{product_name:RE200,product_ver:3.0.0,special_id:45550000}\n"
1579 "{product_name:RE200,product_ver:3.0.0,special_id:49440000}\n"
1580 "{product_name:RE200,product_ver:3.0.0,special_id:4A500000}\n"
1581 "{product_name:RE200,product_ver:3.0.0,special_id:4B520000}\n"
1582 "{product_name:RE200,product_ver:3.0.0,special_id:52550000}\n"
1583 "{product_name:RE200,product_ver:3.0.0,special_id:54570000}\n"
1584 "{product_name:RE200,product_ver:3.0.0,special_id:55530000}\n",
1585 .support_trail
= '\x00',
1589 {"fs-uboot", 0x00000, 0x20000},
1590 {"firmware", 0x20000, 0x7a0000},
1591 {"partition-table", 0x7c0000, 0x02000},
1592 {"default-mac", 0x7c2000, 0x00020},
1593 {"pin", 0x7c2100, 0x00020},
1594 {"product-info", 0x7c3100, 0x01000},
1595 {"soft-version", 0x7c4200, 0x01000},
1596 {"support-list", 0x7c5200, 0x01000},
1597 {"profile", 0x7c6200, 0x08000},
1598 {"config-info", 0x7ce200, 0x00400},
1599 {"user-config", 0x7d0000, 0x10000},
1600 {"default-config", 0x7e0000, 0x10000},
1601 {"radio", 0x7f0000, 0x10000},
1605 .first_sysupgrade_partition
= "os-image",
1606 .last_sysupgrade_partition
= "file-system"
1609 /** Firmware layout for the RE220 v2 */
1615 "{product_name:RE220,product_ver:2.0.0,special_id:00000000}\n"
1616 "{product_name:RE220,product_ver:2.0.0,special_id:41520000}\n"
1617 "{product_name:RE220,product_ver:2.0.0,special_id:41550000}\n"
1618 "{product_name:RE220,product_ver:2.0.0,special_id:42520000}\n"
1619 "{product_name:RE220,product_ver:2.0.0,special_id:43410000}\n"
1620 "{product_name:RE220,product_ver:2.0.0,special_id:45530000}\n"
1621 "{product_name:RE220,product_ver:2.0.0,special_id:45550000}\n"
1622 "{product_name:RE220,product_ver:2.0.0,special_id:49440000}\n"
1623 "{product_name:RE220,product_ver:2.0.0,special_id:4a500000}\n"
1624 "{product_name:RE220,product_ver:2.0.0,special_id:4b520000}\n"
1625 "{product_name:RE220,product_ver:2.0.0,special_id:52550000}\n"
1626 "{product_name:RE220,product_ver:2.0.0,special_id:54570000}\n"
1627 "{product_name:RE220,product_ver:2.0.0,special_id:55530000}\n",
1628 .support_trail
= '\x00',
1632 {"fs-uboot", 0x00000, 0x20000},
1633 {"firmware", 0x20000, 0x7a0000},
1634 {"partition-table", 0x7c0000, 0x02000},
1635 {"default-mac", 0x7c2000, 0x00020},
1636 {"pin", 0x7c2100, 0x00020},
1637 {"product-info", 0x7c3100, 0x01000},
1638 {"soft-version", 0x7c4200, 0x01000},
1639 {"support-list", 0x7c5200, 0x01000},
1640 {"profile", 0x7c6200, 0x08000},
1641 {"config-info", 0x7ce200, 0x00400},
1642 {"user-config", 0x7d0000, 0x10000},
1643 {"default-config", 0x7e0000, 0x10000},
1644 {"radio", 0x7f0000, 0x10000},
1648 .first_sysupgrade_partition
= "os-image",
1649 .last_sysupgrade_partition
= "file-system"
1652 /** Firmware layout for the RE305 v1 */
1658 "{product_name:RE305,product_ver:1.0.0,special_id:45550000}\n"
1659 "{product_name:RE305,product_ver:1.0.0,special_id:55530000}\n"
1660 "{product_name:RE305,product_ver:1.0.0,special_id:4a500000}\n"
1661 "{product_name:RE305,product_ver:1.0.0,special_id:42520000}\n"
1662 "{product_name:RE305,product_ver:1.0.0,special_id:4b520000}\n"
1663 "{product_name:RE305,product_ver:1.0.0,special_id:41550000}\n"
1664 "{product_name:RE305,product_ver:1.0.0,special_id:43410000}\n",
1665 .support_trail
= '\x00',
1669 {"fs-uboot", 0x00000, 0x20000},
1670 {"firmware", 0x20000, 0x5e0000},
1671 {"partition-table", 0x600000, 0x02000},
1672 {"default-mac", 0x610000, 0x00020},
1673 {"pin", 0x610100, 0x00020},
1674 {"product-info", 0x611100, 0x01000},
1675 {"soft-version", 0x620000, 0x01000},
1676 {"support-list", 0x621000, 0x01000},
1677 {"profile", 0x622000, 0x08000},
1678 {"user-config", 0x630000, 0x10000},
1679 {"default-config", 0x640000, 0x10000},
1680 {"radio", 0x7f0000, 0x10000},
1684 .first_sysupgrade_partition
= "os-image",
1685 .last_sysupgrade_partition
= "file-system"
1688 /** Firmware layout for the RE350 v1 */
1694 "{product_name:RE350,product_ver:1.0.0,special_id:45550000}\n"
1695 "{product_name:RE350,product_ver:1.0.0,special_id:00000000}\n"
1696 "{product_name:RE350,product_ver:1.0.0,special_id:41550000}\n"
1697 "{product_name:RE350,product_ver:1.0.0,special_id:55530000}\n"
1698 "{product_name:RE350,product_ver:1.0.0,special_id:43410000}\n"
1699 "{product_name:RE350,product_ver:1.0.0,special_id:4b520000}\n"
1700 "{product_name:RE350,product_ver:1.0.0,special_id:4a500000}\n",
1701 .support_trail
= '\x00',
1704 /** We're using a dynamic kernel/rootfs split here */
1706 {"fs-uboot", 0x00000, 0x20000},
1707 {"firmware", 0x20000, 0x5e0000},
1708 {"partition-table", 0x600000, 0x02000},
1709 {"default-mac", 0x610000, 0x00020},
1710 {"pin", 0x610100, 0x00020},
1711 {"product-info", 0x611100, 0x01000},
1712 {"soft-version", 0x620000, 0x01000},
1713 {"support-list", 0x621000, 0x01000},
1714 {"profile", 0x622000, 0x08000},
1715 {"user-config", 0x630000, 0x10000},
1716 {"default-config", 0x640000, 0x10000},
1717 {"radio", 0x7f0000, 0x10000},
1721 .first_sysupgrade_partition
= "os-image",
1722 .last_sysupgrade_partition
= "file-system"
1725 /** Firmware layout for the RE350K v1 */
1731 "{product_name:RE350K,product_ver:1.0.0,special_id:00000000,product_region:US}\n",
1732 .support_trail
= '\x00',
1735 /** We're using a dynamic kernel/rootfs split here */
1737 {"fs-uboot", 0x00000, 0x20000},
1738 {"firmware", 0x20000, 0xd70000},
1739 {"partition-table", 0xd90000, 0x02000},
1740 {"default-mac", 0xda0000, 0x00020},
1741 {"pin", 0xda0100, 0x00020},
1742 {"product-info", 0xda1100, 0x01000},
1743 {"soft-version", 0xdb0000, 0x01000},
1744 {"support-list", 0xdb1000, 0x01000},
1745 {"profile", 0xdb2000, 0x08000},
1746 {"user-config", 0xdc0000, 0x10000},
1747 {"default-config", 0xdd0000, 0x10000},
1748 {"device-id", 0xde0000, 0x00108},
1749 {"radio", 0xff0000, 0x10000},
1753 .first_sysupgrade_partition
= "os-image",
1754 .last_sysupgrade_partition
= "file-system"
1757 /** Firmware layout for the RE355 */
1763 "{product_name:RE355,product_ver:1.0.0,special_id:00000000}\r\n"
1764 "{product_name:RE355,product_ver:1.0.0,special_id:55530000}\r\n"
1765 "{product_name:RE355,product_ver:1.0.0,special_id:45550000}\r\n"
1766 "{product_name:RE355,product_ver:1.0.0,special_id:4A500000}\r\n"
1767 "{product_name:RE355,product_ver:1.0.0,special_id:43410000}\r\n"
1768 "{product_name:RE355,product_ver:1.0.0,special_id:41550000}\r\n"
1769 "{product_name:RE355,product_ver:1.0.0,special_id:4B520000}\r\n"
1770 "{product_name:RE355,product_ver:1.0.0,special_id:55534100}\r\n",
1771 .support_trail
= '\x00',
1774 /* We're using a dynamic kernel/rootfs split here */
1776 {"fs-uboot", 0x00000, 0x20000},
1777 {"firmware", 0x20000, 0x5e0000},
1778 {"partition-table", 0x600000, 0x02000},
1779 {"default-mac", 0x610000, 0x00020},
1780 {"pin", 0x610100, 0x00020},
1781 {"product-info", 0x611100, 0x01000},
1782 {"soft-version", 0x620000, 0x01000},
1783 {"support-list", 0x621000, 0x01000},
1784 {"profile", 0x622000, 0x08000},
1785 {"user-config", 0x630000, 0x10000},
1786 {"default-config", 0x640000, 0x10000},
1787 {"radio", 0x7f0000, 0x10000},
1791 .first_sysupgrade_partition
= "os-image",
1792 .last_sysupgrade_partition
= "file-system"
1795 /** Firmware layout for the RE450 */
1801 "{product_name:RE450,product_ver:1.0.0,special_id:00000000}\r\n"
1802 "{product_name:RE450,product_ver:1.0.0,special_id:55530000}\r\n"
1803 "{product_name:RE450,product_ver:1.0.0,special_id:45550000}\r\n"
1804 "{product_name:RE450,product_ver:1.0.0,special_id:4A500000}\r\n"
1805 "{product_name:RE450,product_ver:1.0.0,special_id:43410000}\r\n"
1806 "{product_name:RE450,product_ver:1.0.0,special_id:41550000}\r\n"
1807 "{product_name:RE450,product_ver:1.0.0,special_id:4B520000}\r\n"
1808 "{product_name:RE450,product_ver:1.0.0,special_id:55534100}\r\n",
1809 .support_trail
= '\x00',
1812 /** We're using a dynamic kernel/rootfs split here */
1814 {"fs-uboot", 0x00000, 0x20000},
1815 {"firmware", 0x20000, 0x5e0000},
1816 {"partition-table", 0x600000, 0x02000},
1817 {"default-mac", 0x610000, 0x00020},
1818 {"pin", 0x610100, 0x00020},
1819 {"product-info", 0x611100, 0x01000},
1820 {"soft-version", 0x620000, 0x01000},
1821 {"support-list", 0x621000, 0x01000},
1822 {"profile", 0x622000, 0x08000},
1823 {"user-config", 0x630000, 0x10000},
1824 {"default-config", 0x640000, 0x10000},
1825 {"radio", 0x7f0000, 0x10000},
1829 .first_sysupgrade_partition
= "os-image",
1830 .last_sysupgrade_partition
= "file-system"
1833 /** Firmware layout for the RE450 v2 */
1839 "{product_name:RE450,product_ver:2.0.0,special_id:00000000}\r\n"
1840 "{product_name:RE450,product_ver:2.0.0,special_id:55530000}\r\n"
1841 "{product_name:RE450,product_ver:2.0.0,special_id:45550000}\r\n"
1842 "{product_name:RE450,product_ver:2.0.0,special_id:4A500000}\r\n"
1843 "{product_name:RE450,product_ver:2.0.0,special_id:43410000}\r\n"
1844 "{product_name:RE450,product_ver:2.0.0,special_id:41550000}\r\n"
1845 "{product_name:RE450,product_ver:2.0.0,special_id:41530000}\r\n"
1846 "{product_name:RE450,product_ver:2.0.0,special_id:4B520000}\r\n"
1847 "{product_name:RE450,product_ver:2.0.0,special_id:42520000}\r\n",
1848 .support_trail
= '\x00',
1851 /* We're using a dynamic kernel/rootfs split here */
1853 {"fs-uboot", 0x00000, 0x20000},
1854 {"firmware", 0x20000, 0x5e0000},
1855 {"partition-table", 0x600000, 0x02000},
1856 {"default-mac", 0x610000, 0x00020},
1857 {"pin", 0x610100, 0x00020},
1858 {"product-info", 0x611100, 0x01000},
1859 {"soft-version", 0x620000, 0x01000},
1860 {"support-list", 0x621000, 0x01000},
1861 {"profile", 0x622000, 0x08000},
1862 {"user-config", 0x630000, 0x10000},
1863 {"default-config", 0x640000, 0x10000},
1864 {"radio", 0x7f0000, 0x10000},
1868 .first_sysupgrade_partition
= "os-image",
1869 .last_sysupgrade_partition
= "file-system"
1872 /** Firmware layout for the RE450 v3 */
1878 "{product_name:RE450,product_ver:3.0.0,special_id:00000000}\r\n"
1879 "{product_name:RE450,product_ver:3.0.0,special_id:55530000}\r\n"
1880 "{product_name:RE450,product_ver:3.0.0,special_id:45550000}\r\n"
1881 "{product_name:RE450,product_ver:3.0.0,special_id:4A500000}\r\n"
1882 "{product_name:RE450,product_ver:3.0.0,special_id:43410000}\r\n"
1883 "{product_name:RE450,product_ver:3.0.0,special_id:41550000}\r\n"
1884 "{product_name:RE450,product_ver:3.0.0,special_id:41530000}\r\n"
1885 "{product_name:RE450,product_ver:3.0.0,special_id:4B520000}\r\n"
1886 "{product_name:RE450,product_ver:3.0.0,special_id:42520000}\r\n",
1887 .support_trail
= '\x00',
1890 /* We're using a dynamic kernel/rootfs split here */
1892 {"fs-uboot", 0x00000, 0x20000},
1893 {"default-mac", 0x20000, 0x00020},
1894 {"pin", 0x20020, 0x00020},
1895 {"product-info", 0x21000, 0x01000},
1896 {"partition-table", 0x22000, 0x02000},
1897 {"soft-version", 0x24000, 0x01000},
1898 {"support-list", 0x25000, 0x01000},
1899 {"profile", 0x26000, 0x08000},
1900 {"user-config", 0x2e000, 0x10000},
1901 {"default-config", 0x3e000, 0x10000},
1902 {"config-info", 0x4e000, 0x00400},
1903 {"firmware", 0x50000, 0x7a0000},
1904 {"radio", 0x7f0000, 0x10000},
1908 .first_sysupgrade_partition
= "os-image",
1909 .last_sysupgrade_partition
= "file-system"
1912 /** Firmware layout for the RE500 */
1918 "{product_name:RE500,product_ver:1.0.0,special_id:00000000}\r\n"
1919 "{product_name:RE500,product_ver:1.0.0,special_id:55530000}\r\n"
1920 "{product_name:RE500,product_ver:1.0.0,special_id:45550000}\r\n"
1921 "{product_name:RE500,product_ver:1.0.0,special_id:4A500000}\r\n"
1922 "{product_name:RE500,product_ver:1.0.0,special_id:43410000}\r\n"
1923 "{product_name:RE500,product_ver:1.0.0,special_id:41550000}\r\n"
1924 "{product_name:RE500,product_ver:1.0.0,special_id:41530000}\r\n",
1925 .support_trail
= '\x00',
1928 /* We're using a dynamic kernel/rootfs split here */
1930 {"fs-uboot", 0x00000, 0x20000},
1931 {"firmware", 0x20000, 0xde0000},
1932 {"partition-table", 0xe00000, 0x02000},
1933 {"default-mac", 0xe10000, 0x00020},
1934 {"pin", 0xe10100, 0x00020},
1935 {"product-info", 0xe11100, 0x01000},
1936 {"soft-version", 0xe20000, 0x01000},
1937 {"support-list", 0xe21000, 0x01000},
1938 {"profile", 0xe22000, 0x08000},
1939 {"user-config", 0xe30000, 0x10000},
1940 {"default-config", 0xe40000, 0x10000},
1941 {"radio", 0xff0000, 0x10000},
1945 .first_sysupgrade_partition
= "os-image",
1946 .last_sysupgrade_partition
= "file-system"
1949 /** Firmware layout for the RE650 */
1955 "{product_name:RE650,product_ver:1.0.0,special_id:00000000}\r\n"
1956 "{product_name:RE650,product_ver:1.0.0,special_id:55530000}\r\n"
1957 "{product_name:RE650,product_ver:1.0.0,special_id:45550000}\r\n"
1958 "{product_name:RE650,product_ver:1.0.0,special_id:4A500000}\r\n"
1959 "{product_name:RE650,product_ver:1.0.0,special_id:43410000}\r\n"
1960 "{product_name:RE650,product_ver:1.0.0,special_id:41550000}\r\n"
1961 "{product_name:RE650,product_ver:1.0.0,special_id:41530000}\r\n",
1962 .support_trail
= '\x00',
1965 /* We're using a dynamic kernel/rootfs split here */
1967 {"fs-uboot", 0x00000, 0x20000},
1968 {"firmware", 0x20000, 0xde0000},
1969 {"partition-table", 0xe00000, 0x02000},
1970 {"default-mac", 0xe10000, 0x00020},
1971 {"pin", 0xe10100, 0x00020},
1972 {"product-info", 0xe11100, 0x01000},
1973 {"soft-version", 0xe20000, 0x01000},
1974 {"support-list", 0xe21000, 0x01000},
1975 {"profile", 0xe22000, 0x08000},
1976 {"user-config", 0xe30000, 0x10000},
1977 {"default-config", 0xe40000, 0x10000},
1978 {"radio", 0xff0000, 0x10000},
1982 .first_sysupgrade_partition
= "os-image",
1983 .last_sysupgrade_partition
= "file-system"
1989 #define error(_ret, _errno, _str, ...) \
1991 fprintf(stderr, _str ": %s\n", ## __VA_ARGS__, \
1992 strerror(_errno)); \
1998 /** Stores a uint32 as big endian */
1999 static inline void put32(uint8_t *buf
, uint32_t val
) {
2006 /** Allocates a new image partition */
2007 static struct image_partition_entry
alloc_image_partition(const char *name
, size_t len
) {
2008 struct image_partition_entry entry
= {name
, len
, malloc(len
)};
2010 error(1, errno
, "malloc");
2015 /** Frees an image partition */
2016 static void free_image_partition(struct image_partition_entry entry
) {
2020 static time_t source_date_epoch
= -1;
2021 static void set_source_date_epoch() {
2022 char *env
= getenv("SOURCE_DATE_EPOCH");
2026 source_date_epoch
= strtoull(env
, &endptr
, 10);
2027 if (errno
|| (endptr
&& *endptr
!= '\0')) {
2028 fprintf(stderr
, "Invalid SOURCE_DATE_EPOCH");
2034 /** Generates the partition-table partition */
2035 static struct image_partition_entry
make_partition_table(const struct flash_partition_entry
*p
) {
2036 struct image_partition_entry entry
= alloc_image_partition("partition-table", 0x800);
2038 char *s
= (char *)entry
.data
, *end
= (char *)(s
+entry
.size
);
2046 for (i
= 0; p
[i
].name
; i
++) {
2048 size_t w
= snprintf(s
, len
, "partition %s base 0x%05x size 0x%05x\n", p
[i
].name
, p
[i
].base
, p
[i
].size
);
2051 error(1, 0, "flash partition table overflow?");
2058 memset(s
, 0xff, end
-s
);
2064 /** Generates a binary-coded decimal representation of an integer in the range [0, 99] */
2065 static inline uint8_t bcd(uint8_t v
) {
2066 return 0x10 * (v
/10) + v
%10;
2070 /** Generates the soft-version partition */
2071 static struct image_partition_entry
make_soft_version(uint32_t rev
) {
2072 struct image_partition_entry entry
= alloc_image_partition("soft-version", sizeof(struct soft_version
));
2073 struct soft_version
*s
= (struct soft_version
*)entry
.data
;
2077 if (source_date_epoch
!= -1)
2078 t
= source_date_epoch
;
2079 else if (time(&t
) == (time_t)(-1))
2080 error(1, errno
, "time");
2082 struct tm
*tm
= gmtime(&t
);
2084 s
->magic
= htonl(0x0000000c);
2088 s
->version_major
= 0;
2089 s
->version_minor
= 0;
2090 s
->version_patch
= 0;
2092 s
->year_hi
= bcd((1900+tm
->tm_year
)/100);
2093 s
->year_lo
= bcd(tm
->tm_year
%100);
2094 s
->month
= bcd(tm
->tm_mon
+1);
2095 s
->day
= bcd(tm
->tm_mday
);
2096 s
->rev
= htonl(rev
);
2103 static struct image_partition_entry
make_soft_version_from_string(const char *soft_ver
) {
2104 /** String length _including_ the terminating zero byte */
2105 uint32_t ver_len
= strlen(soft_ver
) + 1;
2106 /** Partition contains 64 bit header, the version string, and one additional null byte */
2107 size_t partition_len
= 2*sizeof(uint32_t) + ver_len
+ 1;
2108 struct image_partition_entry entry
= alloc_image_partition("soft-version", partition_len
);
2110 uint32_t *len
= (uint32_t *)entry
.data
;
2111 len
[0] = htonl(ver_len
);
2113 memcpy(&len
[2], soft_ver
, ver_len
);
2115 entry
.data
[partition_len
- 1] = 0;
2120 /** Generates the support-list partition */
2121 static struct image_partition_entry
make_support_list(struct device_info
*info
) {
2122 size_t len
= strlen(info
->support_list
);
2123 struct image_partition_entry entry
= alloc_image_partition("support-list", len
+ 9);
2125 put32(entry
.data
, len
);
2126 memset(entry
.data
+4, 0, 4);
2127 memcpy(entry
.data
+8, info
->support_list
, len
);
2128 entry
.data
[len
+8] = info
->support_trail
;
2133 /** Creates a new image partition with an arbitrary name from a file */
2134 static struct image_partition_entry
read_file(const char *part_name
, const char *filename
, bool add_jffs2_eof
, struct flash_partition_entry
*file_system_partition
) {
2135 struct stat statbuf
;
2137 if (stat(filename
, &statbuf
) < 0)
2138 error(1, errno
, "unable to stat file `%s'", filename
);
2140 size_t len
= statbuf
.st_size
;
2142 if (add_jffs2_eof
) {
2143 if (file_system_partition
)
2144 len
= ALIGN(len
+ file_system_partition
->base
, 0x10000) + sizeof(jffs2_eof_mark
) - file_system_partition
->base
;
2146 len
= ALIGN(len
, 0x10000) + sizeof(jffs2_eof_mark
);
2149 struct image_partition_entry entry
= alloc_image_partition(part_name
, len
);
2151 FILE *file
= fopen(filename
, "rb");
2153 error(1, errno
, "unable to open file `%s'", filename
);
2155 if (fread(entry
.data
, statbuf
.st_size
, 1, file
) != 1)
2156 error(1, errno
, "unable to read file `%s'", filename
);
2158 if (add_jffs2_eof
) {
2159 uint8_t *eof
= entry
.data
+ statbuf
.st_size
, *end
= entry
.data
+entry
.size
;
2161 memset(eof
, 0xff, end
- eof
- sizeof(jffs2_eof_mark
));
2162 memcpy(end
- sizeof(jffs2_eof_mark
), jffs2_eof_mark
, sizeof(jffs2_eof_mark
));
2170 /** Creates a new image partition from arbitrary data */
2171 static struct image_partition_entry
put_data(const char *part_name
, const char *datain
, size_t len
) {
2173 struct image_partition_entry entry
= alloc_image_partition(part_name
, len
);
2175 memcpy(entry
.data
, datain
, len
);
2181 Copies a list of image partitions into an image buffer and generates the image partition table while doing so
2183 Example image partition table:
2185 fwup-ptn partition-table base 0x00800 size 0x00800
2186 fwup-ptn os-image base 0x01000 size 0x113b45
2187 fwup-ptn file-system base 0x114b45 size 0x1d0004
2188 fwup-ptn support-list base 0x2e4b49 size 0x000d1
2190 Each line of the partition table is terminated with the bytes 09 0d 0a ("\t\r\n"),
2191 the end of the partition table is marked with a zero byte.
2193 The firmware image must contain at least the partition-table and support-list partitions
2194 to be accepted. There aren't any alignment constraints for the image partitions.
2196 The partition-table partition contains the actual flash layout; partitions
2197 from the image partition table are mapped to the corresponding flash partitions during
2198 the firmware upgrade. The support-list partition contains a list of devices supported by
2201 The base offsets in the firmware partition table are relative to the end
2202 of the vendor information block, so the partition-table partition will
2203 actually start at offset 0x1814 of the image.
2205 I think partition-table must be the first partition in the firmware image.
2207 static void put_partitions(uint8_t *buffer
, const struct flash_partition_entry
*flash_parts
, const struct image_partition_entry
*parts
) {
2209 char *image_pt
= (char *)buffer
, *end
= image_pt
+ 0x800;
2211 size_t base
= 0x800;
2212 for (i
= 0; parts
[i
].name
; i
++) {
2213 for (j
= 0; flash_parts
[j
].name
; j
++) {
2214 if (!strcmp(flash_parts
[j
].name
, parts
[i
].name
)) {
2215 if (parts
[i
].size
> flash_parts
[j
].size
)
2216 error(1, 0, "%s partition too big (more than %u bytes)", flash_parts
[j
].name
, (unsigned)flash_parts
[j
].size
);
2221 assert(flash_parts
[j
].name
);
2223 memcpy(buffer
+ base
, parts
[i
].data
, parts
[i
].size
);
2225 size_t len
= end
-image_pt
;
2226 size_t w
= snprintf(image_pt
, len
, "fwup-ptn %s base 0x%05x size 0x%05x\t\r\n", parts
[i
].name
, (unsigned)base
, (unsigned)parts
[i
].size
);
2229 error(1, 0, "image partition table overflow?");
2233 base
+= parts
[i
].size
;
2237 /** Generates and writes the image MD5 checksum */
2238 static void put_md5(uint8_t *md5
, uint8_t *buffer
, unsigned int len
) {
2242 MD5_Update(&ctx
, md5_salt
, (unsigned int)sizeof(md5_salt
));
2243 MD5_Update(&ctx
, buffer
, len
);
2244 MD5_Final(md5
, &ctx
);
2249 Generates the firmware image in factory format
2255 0000-0003 Image size (4 bytes, big endian)
2256 0004-0013 MD5 hash (hash of a 16 byte salt and the image data starting with byte 0x14)
2257 0014-0017 Vendor information length (without padding) (4 bytes, big endian)
2258 0018-1013 Vendor information (4092 bytes, padded with 0xff; there seem to be older
2259 (VxWorks-based) TP-LINK devices which use a smaller vendor information block)
2260 1014-1813 Image partition table (2048 bytes, padded with 0xff)
2261 1814-xxxx Firmware partitions
2263 static void * generate_factory_image(struct device_info
*info
, const struct image_partition_entry
*parts
, size_t *len
) {
2267 for (i
= 0; parts
[i
].name
; i
++)
2268 *len
+= parts
[i
].size
;
2270 uint8_t *image
= malloc(*len
);
2272 error(1, errno
, "malloc");
2274 memset(image
, 0xff, *len
);
2278 size_t vendor_len
= strlen(info
->vendor
);
2279 put32(image
+0x14, vendor_len
);
2280 memcpy(image
+0x18, info
->vendor
, vendor_len
);
2283 put_partitions(image
+ 0x1014, info
->partitions
, parts
);
2284 put_md5(image
+0x04, image
+0x14, *len
-0x14);
2290 Generates the firmware image in sysupgrade format
2292 This makes some assumptions about the provided flash and image partition tables and
2293 should be generalized when TP-LINK starts building its safeloader into hardware with
2294 different flash layouts.
2296 static void * generate_sysupgrade_image(struct device_info
*info
, const struct image_partition_entry
*image_parts
, size_t *len
) {
2298 size_t flash_first_partition_index
= 0;
2299 size_t flash_last_partition_index
= 0;
2300 const struct flash_partition_entry
*flash_first_partition
= NULL
;
2301 const struct flash_partition_entry
*flash_last_partition
= NULL
;
2302 const struct image_partition_entry
*image_last_partition
= NULL
;
2304 /** Find first and last partitions */
2305 for (i
= 0; info
->partitions
[i
].name
; i
++) {
2306 if (!strcmp(info
->partitions
[i
].name
, info
->first_sysupgrade_partition
)) {
2307 flash_first_partition
= &info
->partitions
[i
];
2308 flash_first_partition_index
= i
;
2309 } else if (!strcmp(info
->partitions
[i
].name
, info
->last_sysupgrade_partition
)) {
2310 flash_last_partition
= &info
->partitions
[i
];
2311 flash_last_partition_index
= i
;
2315 assert(flash_first_partition
&& flash_last_partition
);
2316 assert(flash_first_partition_index
< flash_last_partition_index
);
2318 /** Find last partition from image to calculate needed size */
2319 for (i
= 0; image_parts
[i
].name
; i
++) {
2320 if (!strcmp(image_parts
[i
].name
, info
->last_sysupgrade_partition
)) {
2321 image_last_partition
= &image_parts
[i
];
2326 assert(image_last_partition
);
2328 *len
= flash_last_partition
->base
- flash_first_partition
->base
+ image_last_partition
->size
;
2330 uint8_t *image
= malloc(*len
);
2332 error(1, errno
, "malloc");
2334 memset(image
, 0xff, *len
);
2336 for (i
= flash_first_partition_index
; i
<= flash_last_partition_index
; i
++) {
2337 for (j
= 0; image_parts
[j
].name
; j
++) {
2338 if (!strcmp(info
->partitions
[i
].name
, image_parts
[j
].name
)) {
2339 if (image_parts
[j
].size
> info
->partitions
[i
].size
)
2340 error(1, 0, "%s partition too big (more than %u bytes)", info
->partitions
[i
].name
, (unsigned)info
->partitions
[i
].size
);
2341 memcpy(image
+ info
->partitions
[i
].base
- flash_first_partition
->base
, image_parts
[j
].data
, image_parts
[j
].size
);
2345 assert(image_parts
[j
].name
);
2352 /** Generates an image according to a given layout and writes it to a file */
2353 static void build_image(const char *output
,
2354 const char *kernel_image
,
2355 const char *rootfs_image
,
2359 struct device_info
*info
) {
2363 struct image_partition_entry parts
[7] = {};
2365 struct flash_partition_entry
*firmware_partition
= NULL
;
2366 struct flash_partition_entry
*os_image_partition
= NULL
;
2367 struct flash_partition_entry
*file_system_partition
= NULL
;
2368 size_t firmware_partition_index
= 0;
2370 for (i
= 0; info
->partitions
[i
].name
; i
++) {
2371 if (!strcmp(info
->partitions
[i
].name
, "firmware"))
2373 firmware_partition
= &info
->partitions
[i
];
2374 firmware_partition_index
= i
;
2378 if (firmware_partition
)
2380 os_image_partition
= &info
->partitions
[firmware_partition_index
];
2381 file_system_partition
= &info
->partitions
[firmware_partition_index
+ 1];
2384 if (stat(kernel_image
, &kernel
) < 0)
2385 error(1, errno
, "unable to stat file `%s'", kernel_image
);
2387 if (kernel
.st_size
> firmware_partition
->size
)
2388 error(1, 0, "kernel overflowed firmware partition\n");
2390 for (i
= MAX_PARTITIONS
-1; i
>= firmware_partition_index
+ 1; i
--)
2391 info
->partitions
[i
+1] = info
->partitions
[i
];
2393 file_system_partition
->name
= "file-system";
2394 file_system_partition
->base
= firmware_partition
->base
+ kernel
.st_size
;
2396 /* Align partition start to erase blocks for factory images only */
2398 file_system_partition
->base
= ALIGN(firmware_partition
->base
+ kernel
.st_size
, 0x10000);
2400 file_system_partition
->size
= firmware_partition
->size
- file_system_partition
->base
;
2402 os_image_partition
->name
= "os-image";
2403 os_image_partition
->size
= kernel
.st_size
;
2406 parts
[0] = make_partition_table(info
->partitions
);
2408 parts
[1] = make_soft_version_from_string(info
->soft_ver
);
2410 parts
[1] = make_soft_version(rev
);
2412 parts
[2] = make_support_list(info
);
2413 parts
[3] = read_file("os-image", kernel_image
, false, NULL
);
2414 parts
[4] = read_file("file-system", rootfs_image
, add_jffs2_eof
, file_system_partition
);
2416 /* Some devices need the extra-para partition to accept the firmware */
2417 if (strcasecmp(info
->id
, "ARCHER-C2-V3") == 0 ||
2418 strcasecmp(info
->id
, "ARCHER-C25-V1") == 0 ||
2419 strcasecmp(info
->id
, "ARCHER-C59-V2") == 0 ||
2420 strcasecmp(info
->id
, "ARCHER-C60-V2") == 0 ||
2421 strcasecmp(info
->id
, "ARCHER-C60-V3") == 0 ||
2422 strcasecmp(info
->id
, "TLWR1043NV5") == 0) {
2423 const char mdat
[11] = {0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00};
2424 parts
[5] = put_data("extra-para", mdat
, 11);
2425 } else if (strcasecmp(info
->id
, "ARCHER-A7-V5") == 0 || strcasecmp(info
->id
, "ARCHER-C7-V4") == 0 || strcasecmp(info
->id
, "ARCHER-C7-V5") == 0) {
2426 const char mdat
[11] = {0x01, 0x00, 0x00, 0x02, 0x00, 0x00, 0xca, 0x00, 0x01, 0x00, 0x00};
2427 parts
[5] = put_data("extra-para", mdat
, 11);
2428 } else if (strcasecmp(info
->id
, "ARCHER-C6-V2") == 0) {
2429 const char mdat
[11] = {0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00};
2430 parts
[5] = put_data("extra-para", mdat
, 11);
2431 } else if (strcasecmp(info
->id
, "ARCHER-C6-V2-US") == 0) {
2432 const char mdat
[11] = {0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x00};
2433 parts
[5] = put_data("extra-para", mdat
, 11);
2439 image
= generate_sysupgrade_image(info
, parts
, &len
);
2441 image
= generate_factory_image(info
, parts
, &len
);
2443 FILE *file
= fopen(output
, "wb");
2445 error(1, errno
, "unable to open output file");
2447 if (fwrite(image
, len
, 1, file
) != 1)
2448 error(1, 0, "unable to write output file");
2454 for (i
= 0; parts
[i
].name
; i
++)
2455 free_image_partition(parts
[i
]);
2459 static void usage(const char *argv0
) {
2461 "Usage: %s [OPTIONS...]\n"
2464 " -h show this help\n"
2466 "Create a new image:\n"
2467 " -B <board> create image for the board specified with <board>\n"
2468 " -k <file> read kernel image from the file <file>\n"
2469 " -r <file> read rootfs image from the file <file>\n"
2470 " -o <file> write output to the file <file>\n"
2471 " -V <rev> sets the revision number to <rev>\n"
2472 " -j add jffs2 end-of-filesystem markers\n"
2473 " -S create sysupgrade instead of factory image\n"
2474 "Extract an old image:\n"
2475 " -x <file> extract all oem firmware partition\n"
2476 " -d <dir> destination to extract the firmware partition\n"
2477 " -z <file> convert an oem firmware into a sysupgade file. Use -o for output file\n",
2483 static struct device_info
*find_board(const char *id
)
2485 struct device_info
*board
= NULL
;
2487 for (board
= boards
; board
->id
!= NULL
; board
++)
2488 if (strcasecmp(id
, board
->id
) == 0)
2494 static int add_flash_partition(
2495 struct flash_partition_entry
*part_list
,
2502 /* check if the list has a free entry */
2503 for (ptr
= 0; ptr
< max_entries
; ptr
++, part_list
++) {
2504 if (part_list
->name
== NULL
&&
2505 part_list
->base
== 0 &&
2506 part_list
->size
== 0)
2510 if (ptr
== max_entries
) {
2511 error(1, 0, "No free flash part entry available.");
2514 part_list
->name
= calloc(1, strlen(name
) + 1);
2515 if (!part_list
->name
) {
2516 error(1, 0, "Unable to allocate memory");
2519 memcpy((char *)part_list
->name
, name
, strlen(name
));
2520 part_list
->base
= base
;
2521 part_list
->size
= size
;
2526 /** read the partition table into struct flash_partition_entry */
2527 static int read_partition_table(
2528 FILE *file
, long offset
,
2529 struct flash_partition_entry
*entries
, size_t max_entries
,
2534 const char *parthdr
= NULL
;
2535 const char *fwuphdr
= "fwup-ptn";
2536 const char *flashhdr
= "partition";
2538 /* TODO: search for the partition table */
2548 error(1, 0, "Invalid partition table");
2551 if (fseek(file
, offset
, SEEK_SET
) < 0)
2552 error(1, errno
, "Can not seek in the firmware");
2554 if (fread(buf
, 2048, 1, file
) != 1)
2555 error(1, errno
, "Can not read fwup-ptn from the firmware");
2559 /* look for the partition header */
2560 if (memcmp(buf
, parthdr
, strlen(parthdr
)) != 0) {
2561 fprintf(stderr
, "DEBUG: can not find fwuphdr\n");
2566 end
= buf
+ sizeof(buf
);
2567 while ((ptr
+ strlen(parthdr
)) < end
&&
2568 memcmp(ptr
, parthdr
, strlen(parthdr
)) == 0) {
2572 char name
[32] = { 0 };
2574 unsigned long base
= 0;
2575 unsigned long size
= 0;
2577 end_part
= memchr(ptr
, '\n', (end
- ptr
));
2578 if (end_part
== NULL
) {
2579 /* in theory this should never happen, because a partition always ends with 0x09, 0x0D, 0x0A */
2583 for (int i
= 0; i
<= 4; i
++) {
2584 if (end_part
<= ptr
)
2587 end_element
= memchr(ptr
, 0x20, (end_part
- ptr
));
2588 if (end_element
== NULL
) {
2589 error(1, errno
, "Ignoring the rest of the partition entries.");
2594 /* partition header */
2596 ptr
= end_element
+ 1;
2600 name_len
= (end_element
- ptr
) > 31 ? 31 : (end_element
- ptr
);
2601 strncpy(name
, ptr
, name_len
);
2602 name
[name_len
] = '\0';
2603 ptr
= end_element
+ 1;
2608 ptr
= end_element
+ 1;
2613 base
= strtoul(ptr
, NULL
, 16);
2614 ptr
= end_element
+ 1;
2619 ptr
= end_element
+ 1;
2620 /* actual size. The last element doesn't have a sepeartor */
2621 size
= strtoul(ptr
, NULL
, 16);
2622 /* the part ends with 0x09, 0x0d, 0x0a */
2624 add_flash_partition(entries
, max_entries
, name
, base
, size
);
2633 static void write_partition(
2635 size_t firmware_offset
,
2636 struct flash_partition_entry
*entry
,
2642 fseek(input_file
, entry
->base
+ firmware_offset
, SEEK_SET
);
2644 for (offset
= 0; sizeof(buf
) + offset
<= entry
->size
; offset
+= sizeof(buf
)) {
2645 if (fread(buf
, sizeof(buf
), 1, input_file
) != 1)
2646 error(1, errno
, "Can not read partition from input_file");
2648 if (fwrite(buf
, sizeof(buf
), 1, output_file
) != 1)
2649 error(1, errno
, "Can not write partition to output_file");
2651 /* write last chunk smaller than buffer */
2652 if (offset
< entry
->size
) {
2653 offset
= entry
->size
- offset
;
2654 if (fread(buf
, offset
, 1, input_file
) != 1)
2655 error(1, errno
, "Can not read partition from input_file");
2656 if (fwrite(buf
, offset
, 1, output_file
) != 1)
2657 error(1, errno
, "Can not write partition to output_file");
2661 static int extract_firmware_partition(FILE *input_file
, size_t firmware_offset
, struct flash_partition_entry
*entry
, const char *output_directory
)
2664 char output
[PATH_MAX
];
2666 snprintf(output
, PATH_MAX
, "%s/%s", output_directory
, entry
->name
);
2667 output_file
= fopen(output
, "wb+");
2668 if (output_file
== NULL
) {
2669 error(1, errno
, "Can not open output file %s", output
);
2672 write_partition(input_file
, firmware_offset
, entry
, output_file
);
2674 fclose(output_file
);
2679 /** extract all partitions from the firmware file */
2680 static int extract_firmware(const char *input
, const char *output_directory
)
2682 struct flash_partition_entry entries
[16] = { 0 };
2683 size_t max_entries
= 16;
2684 size_t firmware_offset
= 0x1014;
2687 struct stat statbuf
;
2689 /* check input file */
2690 if (stat(input
, &statbuf
)) {
2691 error(1, errno
, "Can not read input firmware %s", input
);
2694 /* check if output directory exists */
2695 if (stat(output_directory
, &statbuf
)) {
2696 error(1, errno
, "Failed to stat output directory %s", output_directory
);
2699 if ((statbuf
.st_mode
& S_IFMT
) != S_IFDIR
) {
2700 error(1, errno
, "Given output directory is not a directory %s", output_directory
);
2703 input_file
= fopen(input
, "rb");
2705 if (read_partition_table(input_file
, firmware_offset
, entries
, 16, 0) != 0) {
2706 error(1, 0, "Error can not read the partition table (fwup-ptn)");
2709 for (size_t i
= 0; i
< max_entries
; i
++) {
2710 if (entries
[i
].name
== NULL
&&
2711 entries
[i
].base
== 0 &&
2712 entries
[i
].size
== 0)
2715 extract_firmware_partition(input_file
, firmware_offset
, &entries
[i
], output_directory
);
2721 static struct flash_partition_entry
*find_partition(
2722 struct flash_partition_entry
*entries
, size_t max_entries
,
2723 const char *name
, const char *error_msg
)
2725 for (size_t i
= 0; i
< max_entries
; i
++, entries
++) {
2726 if (strcmp(entries
->name
, name
) == 0)
2730 error(1, 0, "%s", error_msg
);
2734 static void write_ff(FILE *output_file
, size_t size
)
2739 memset(buf
, 0xff, sizeof(buf
));
2741 for (offset
= 0; offset
+ sizeof(buf
) < size
; offset
+= sizeof(buf
)) {
2742 if (fwrite(buf
, sizeof(buf
), 1, output_file
) != 1)
2743 error(1, errno
, "Can not write 0xff to output_file");
2746 /* write last chunk smaller than buffer */
2747 if (offset
< size
) {
2748 offset
= size
- offset
;
2749 if (fwrite(buf
, offset
, 1, output_file
) != 1)
2750 error(1, errno
, "Can not write partition to output_file");
2754 static void convert_firmware(const char *input
, const char *output
)
2756 struct flash_partition_entry fwup
[MAX_PARTITIONS
] = { 0 };
2757 struct flash_partition_entry flash
[MAX_PARTITIONS
] = { 0 };
2758 struct flash_partition_entry
*fwup_os_image
= NULL
, *fwup_file_system
= NULL
;
2759 struct flash_partition_entry
*flash_os_image
= NULL
, *flash_file_system
= NULL
;
2760 struct flash_partition_entry
*fwup_partition_table
= NULL
;
2761 size_t firmware_offset
= 0x1014;
2762 FILE *input_file
, *output_file
;
2764 struct stat statbuf
;
2766 /* check input file */
2767 if (stat(input
, &statbuf
)) {
2768 error(1, errno
, "Can not read input firmware %s", input
);
2771 input_file
= fopen(input
, "rb");
2773 error(1, 0, "Can not open input firmware %s", input
);
2775 output_file
= fopen(output
, "wb");
2777 error(1, 0, "Can not open output firmware %s", output
);
2779 if (read_partition_table(input_file
, firmware_offset
, fwup
, MAX_PARTITIONS
, 0) != 0) {
2780 error(1, 0, "Error can not read the partition table (fwup-ptn)");
2783 fwup_os_image
= find_partition(fwup
, MAX_PARTITIONS
,
2784 "os-image", "Error can not find os-image partition (fwup)");
2785 fwup_file_system
= find_partition(fwup
, MAX_PARTITIONS
,
2786 "file-system", "Error can not find file-system partition (fwup)");
2787 fwup_partition_table
= find_partition(fwup
, MAX_PARTITIONS
,
2788 "partition-table", "Error can not find partition-table partition");
2790 /* the flash partition table has a 0x00000004 magic haeder */
2791 if (read_partition_table(input_file
, firmware_offset
+ fwup_partition_table
->base
+ 4, flash
, MAX_PARTITIONS
, 1) != 0)
2792 error(1, 0, "Error can not read the partition table (flash)");
2794 flash_os_image
= find_partition(flash
, MAX_PARTITIONS
,
2795 "os-image", "Error can not find os-image partition (flash)");
2796 flash_file_system
= find_partition(flash
, MAX_PARTITIONS
,
2797 "file-system", "Error can not find file-system partition (flash)");
2799 /* write os_image to 0x0 */
2800 write_partition(input_file
, firmware_offset
, fwup_os_image
, output_file
);
2801 write_ff(output_file
, flash_os_image
->size
- fwup_os_image
->size
);
2803 /* write file-system behind os_image */
2804 fseek(output_file
, flash_file_system
->base
- flash_os_image
->base
, SEEK_SET
);
2805 write_partition(input_file
, firmware_offset
, fwup_file_system
, output_file
);
2806 write_ff(output_file
, flash_file_system
->size
- fwup_file_system
->size
);
2808 fclose(output_file
);
2812 int main(int argc
, char *argv
[]) {
2813 const char *board
= NULL
, *kernel_image
= NULL
, *rootfs_image
= NULL
, *output
= NULL
;
2814 const char *extract_image
= NULL
, *output_directory
= NULL
, *convert_image
= NULL
;
2815 bool add_jffs2_eof
= false, sysupgrade
= false;
2817 struct device_info
*info
;
2818 set_source_date_epoch();
2823 c
= getopt(argc
, argv
, "B:k:r:o:V:jSh:x:d:z:");
2833 kernel_image
= optarg
;
2837 rootfs_image
= optarg
;
2845 sscanf(optarg
, "r%u", &rev
);
2849 add_jffs2_eof
= true;
2861 output_directory
= optarg
;
2865 extract_image
= optarg
;
2869 convert_image
= optarg
;
2878 if (extract_image
|| output_directory
) {
2880 error(1, 0, "No factory/oem image given via -x <file>. Output directory is only valid with -x");
2881 if (!output_directory
)
2882 error(1, 0, "Can not extract an image without output directory. Use -d <dir>");
2883 extract_firmware(extract_image
, output_directory
);
2884 } else if (convert_image
) {
2886 error(1, 0, "Can not convert a factory/oem image into sysupgrade image without output file. Use -o <file>");
2887 convert_firmware(convert_image
, output
);
2890 error(1, 0, "no board has been specified");
2892 error(1, 0, "no kernel image has been specified");
2894 error(1, 0, "no rootfs image has been specified");
2896 error(1, 0, "no output filename has been specified");
2898 info
= find_board(board
);
2901 error(1, 0, "unsupported board %s", board
);
2903 build_image(output
, kernel_image
, rootfs_image
, rev
, add_jffs2_eof
, sysupgrade
, info
);