2 Copyright (c) 2014, Matthias Schiffer <mschiffer@universe-factory.net>
5 Redistribution and use in source and binary forms, with or without
6 modification, are permitted provided that the following conditions are met:
8 1. Redistributions of source code must retain the above copyright notice,
9 this list of conditions and the following disclaimer.
10 2. Redistributions in binary form must reproduce the above copyright notice,
11 this list of conditions and the following disclaimer in the documentation
12 and/or other materials provided with the distribution.
14 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
15 AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16 IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
17 DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
18 FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19 DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
20 SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
21 CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
22 OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
23 OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
30 Image generation tool for the TP-LINK SafeLoader as seen on
31 TP-LINK Pharos devices (CPE210/220/510/520)
45 #include <arpa/inet.h>
47 #include <sys/types.h>
54 #define ALIGN(x,a) ({ typeof(a) __a = (a); (((x) + __a - 1) & ~(__a - 1)); })
57 #define MAX_PARTITIONS 32
59 /** An image partition table entry */
60 struct image_partition_entry
{
66 /** A flash partition table entry */
67 struct flash_partition_entry
{
73 /** Partition trailing padding definitions
74 * Values 0x00 to 0xff are reserved to indicate the padding value
75 * Values from 0x100 are reserved to indicate other behaviour */
76 enum partition_trail_value
{
79 PART_TRAIL_MAX
= 0xff,
80 PART_TRAIL_NONE
= 0x100
83 /** Firmware layout description */
87 const char *support_list
;
88 enum partition_trail_value part_trail
;
90 uint32_t soft_ver_compat_level
;
91 struct flash_partition_entry partitions
[MAX_PARTITIONS
+1];
92 const char *first_sysupgrade_partition
;
93 const char *last_sysupgrade_partition
;
96 struct __attribute__((__packed__
)) meta_header
{
101 /** The content of the soft-version structure */
102 struct __attribute__((__packed__
)) soft_version
{
104 uint8_t version_major
;
105 uint8_t version_minor
;
106 uint8_t version_patch
;
112 uint32_t compat_level
;
116 static const uint8_t jffs2_eof_mark
[4] = {0xde, 0xad, 0xc0, 0xde};
120 Salt for the MD5 hash
122 Fortunately, TP-LINK seems to use the same salt for most devices which use
123 the new image format.
125 static const uint8_t md5_salt
[16] = {
126 0x7a, 0x2b, 0x15, 0xed,
127 0x9b, 0x98, 0x59, 0x6d,
128 0xe5, 0x04, 0xab, 0x44,
129 0xac, 0x2a, 0x9f, 0x4e,
133 /** Firmware layout table */
134 static struct device_info boards
[] = {
135 /** Firmware layout for the CPE210/220 V1 */
138 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
141 "CPE210(TP-LINK|UN|N300-2):1.0\r\n"
142 "CPE210(TP-LINK|UN|N300-2):1.1\r\n"
143 "CPE210(TP-LINK|US|N300-2):1.1\r\n"
144 "CPE210(TP-LINK|EU|N300-2):1.1\r\n"
145 "CPE220(TP-LINK|UN|N300-2):1.1\r\n"
146 "CPE220(TP-LINK|US|N300-2):1.1\r\n"
147 "CPE220(TP-LINK|EU|N300-2):1.1\r\n",
152 {"fs-uboot", 0x00000, 0x20000},
153 {"partition-table", 0x20000, 0x02000},
154 {"default-mac", 0x30000, 0x00020},
155 {"product-info", 0x31100, 0x00100},
156 {"signature", 0x32000, 0x00400},
157 {"os-image", 0x40000, 0x300000},
158 {"file-system", 0x340000, 0x470000},
159 {"soft-version", 0x7b0000, 0x00100},
160 {"support-list", 0x7b1000, 0x00400},
161 {"user-config", 0x7c0000, 0x10000},
162 {"default-config", 0x7d0000, 0x10000},
163 {"log", 0x7e0000, 0x10000},
164 {"radio", 0x7f0000, 0x10000},
168 .first_sysupgrade_partition
= "os-image",
169 .last_sysupgrade_partition
= "support-list",
172 /** Firmware layout for the CPE210 V2 */
175 .vendor
= "CPE210(TP-LINK|UN|N300-2|00000000):2.0\r\n",
178 "CPE210(TP-LINK|EU|N300-2|00000000):2.0\r\n"
179 "CPE210(TP-LINK|EU|N300-2|45550000):2.0\r\n"
180 "CPE210(TP-LINK|EU|N300-2|55530000):2.0\r\n"
181 "CPE210(TP-LINK|UN|N300-2|00000000):2.0\r\n"
182 "CPE210(TP-LINK|UN|N300-2|45550000):2.0\r\n"
183 "CPE210(TP-LINK|UN|N300-2|55530000):2.0\r\n"
184 "CPE210(TP-LINK|US|N300-2|55530000):2.0\r\n"
185 "CPE210(TP-LINK|UN|N300-2):2.0\r\n"
186 "CPE210(TP-LINK|EU|N300-2):2.0\r\n"
187 "CPE210(TP-LINK|US|N300-2):2.0\r\n",
192 {"fs-uboot", 0x00000, 0x20000},
193 {"partition-table", 0x20000, 0x02000},
194 {"default-mac", 0x30000, 0x00020},
195 {"product-info", 0x31100, 0x00100},
196 {"device-info", 0x31400, 0x00400},
197 {"signature", 0x32000, 0x00400},
198 {"device-id", 0x33000, 0x00100},
199 {"firmware", 0x40000, 0x770000},
200 {"soft-version", 0x7b0000, 0x00100},
201 {"support-list", 0x7b1000, 0x01000},
202 {"user-config", 0x7c0000, 0x10000},
203 {"default-config", 0x7d0000, 0x10000},
204 {"log", 0x7e0000, 0x10000},
205 {"radio", 0x7f0000, 0x10000},
209 .first_sysupgrade_partition
= "os-image",
210 .last_sysupgrade_partition
= "support-list",
213 /** Firmware layout for the CPE210 V3 */
216 .vendor
= "CPE210(TP-LINK|UN|N300-2|00000000):3.0\r\n",
219 "CPE210(TP-LINK|EU|N300-2|45550000):3.0\r\n"
220 "CPE210(TP-LINK|UN|N300-2|00000000):3.0\r\n"
221 "CPE210(TP-LINK|US|N300-2|55530000):3.0\r\n"
222 "CPE210(TP-LINK|UN|N300-2):3.0\r\n"
223 "CPE210(TP-LINK|EU|N300-2):3.0\r\n"
224 "CPE210(TP-LINK|EU|N300-2|45550000):3.1\r\n"
225 "CPE210(TP-LINK|UN|N300-2|00000000):3.1\r\n"
226 "CPE210(TP-LINK|US|N300-2|55530000):3.1\r\n"
227 "CPE210(TP-LINK|EU|N300-2|45550000):3.20\r\n"
228 "CPE210(TP-LINK|UN|N300-2|00000000):3.20\r\n"
229 "CPE210(TP-LINK|US|N300-2|55530000):3.20\r\n",
234 {"fs-uboot", 0x00000, 0x20000},
235 {"partition-table", 0x20000, 0x01000},
236 {"default-mac", 0x30000, 0x00020},
237 {"product-info", 0x31100, 0x00100},
238 {"device-info", 0x31400, 0x00400},
239 {"signature", 0x32000, 0x00400},
240 {"device-id", 0x33000, 0x00100},
241 {"firmware", 0x40000, 0x770000},
242 {"soft-version", 0x7b0000, 0x00100},
243 {"support-list", 0x7b1000, 0x01000},
244 {"user-config", 0x7c0000, 0x10000},
245 {"default-config", 0x7d0000, 0x10000},
246 {"log", 0x7e0000, 0x10000},
247 {"radio", 0x7f0000, 0x10000},
251 .first_sysupgrade_partition
= "os-image",
252 .last_sysupgrade_partition
= "support-list",
255 /** Firmware layout for the CPE220 V2 */
258 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
261 "CPE220(TP-LINK|EU|N300-2|00000000):2.0\r\n"
262 "CPE220(TP-LINK|EU|N300-2|45550000):2.0\r\n"
263 "CPE220(TP-LINK|EU|N300-2|55530000):2.0\r\n"
264 "CPE220(TP-LINK|UN|N300-2|00000000):2.0\r\n"
265 "CPE220(TP-LINK|UN|N300-2|45550000):2.0\r\n"
266 "CPE220(TP-LINK|UN|N300-2|55530000):2.0\r\n"
267 "CPE220(TP-LINK|US|N300-2|55530000):2.0\r\n"
268 "CPE220(TP-LINK|UN|N300-2):2.0\r\n"
269 "CPE220(TP-LINK|EU|N300-2):2.0\r\n"
270 "CPE220(TP-LINK|US|N300-2):2.0\r\n",
275 {"fs-uboot", 0x00000, 0x20000},
276 {"partition-table", 0x20000, 0x02000},
277 {"default-mac", 0x30000, 0x00020},
278 {"product-info", 0x31100, 0x00100},
279 {"signature", 0x32000, 0x00400},
280 {"os-image", 0x40000, 0x300000},
281 {"file-system", 0x340000, 0x470000},
282 {"soft-version", 0x7b0000, 0x00100},
283 {"support-list", 0x7b1000, 0x00400},
284 {"user-config", 0x7c0000, 0x10000},
285 {"default-config", 0x7d0000, 0x10000},
286 {"log", 0x7e0000, 0x10000},
287 {"radio", 0x7f0000, 0x10000},
291 .first_sysupgrade_partition
= "os-image",
292 .last_sysupgrade_partition
= "support-list",
295 /** Firmware layout for the CPE220 V3 */
298 .vendor
= "CPE220(TP-LINK|UN|N300-2|00000000):3.0\r\n",
301 "CPE220(TP-LINK|EU|N300-2|00000000):3.0\r\n"
302 "CPE220(TP-LINK|EU|N300-2|45550000):3.0\r\n"
303 "CPE220(TP-LINK|EU|N300-2|55530000):3.0\r\n"
304 "CPE220(TP-LINK|UN|N300-2|00000000):3.0\r\n"
305 "CPE220(TP-LINK|UN|N300-2|45550000):3.0\r\n"
306 "CPE220(TP-LINK|UN|N300-2|55530000):3.0\r\n"
307 "CPE220(TP-LINK|US|N300-2|55530000):3.0\r\n"
308 "CPE220(TP-LINK|UN|N300-2):3.0\r\n"
309 "CPE220(TP-LINK|EU|N300-2):3.0\r\n"
310 "CPE220(TP-LINK|US|N300-2):3.0\r\n",
315 {"fs-uboot", 0x00000, 0x20000},
316 {"partition-table", 0x20000, 0x02000},
317 {"default-mac", 0x30000, 0x00020},
318 {"product-info", 0x31100, 0x00100},
319 {"device-info", 0x31400, 0x00400},
320 {"signature", 0x32000, 0x00400},
321 {"device-id", 0x33000, 0x00100},
322 {"firmware", 0x40000, 0x770000},
323 {"soft-version", 0x7b0000, 0x00100},
324 {"support-list", 0x7b1000, 0x01000},
325 {"user-config", 0x7c0000, 0x10000},
326 {"default-config", 0x7d0000, 0x10000},
327 {"log", 0x7e0000, 0x10000},
328 {"radio", 0x7f0000, 0x10000},
332 .first_sysupgrade_partition
= "os-image",
333 .last_sysupgrade_partition
= "support-list",
336 /** Firmware layout for the CPE510/520 V1 */
339 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
342 "CPE510(TP-LINK|UN|N300-5):1.0\r\n"
343 "CPE510(TP-LINK|UN|N300-5):1.1\r\n"
344 "CPE510(TP-LINK|UN|N300-5):1.1\r\n"
345 "CPE510(TP-LINK|US|N300-5):1.1\r\n"
346 "CPE510(TP-LINK|EU|N300-5):1.1\r\n"
347 "CPE520(TP-LINK|UN|N300-5):1.1\r\n"
348 "CPE520(TP-LINK|US|N300-5):1.1\r\n"
349 "CPE520(TP-LINK|EU|N300-5):1.1\r\n",
354 {"fs-uboot", 0x00000, 0x20000},
355 {"partition-table", 0x20000, 0x02000},
356 {"default-mac", 0x30000, 0x00020},
357 {"product-info", 0x31100, 0x00100},
358 {"signature", 0x32000, 0x00400},
359 {"os-image", 0x40000, 0x300000},
360 {"file-system", 0x340000, 0x470000},
361 {"soft-version", 0x7b0000, 0x00100},
362 {"support-list", 0x7b1000, 0x00400},
363 {"user-config", 0x7c0000, 0x10000},
364 {"default-config", 0x7d0000, 0x10000},
365 {"log", 0x7e0000, 0x10000},
366 {"radio", 0x7f0000, 0x10000},
370 .first_sysupgrade_partition
= "os-image",
371 .last_sysupgrade_partition
= "support-list",
374 /** Firmware layout for the CPE510 V2 */
377 .vendor
= "CPE510(TP-LINK|UN|N300-5):2.0\r\n",
380 "CPE510(TP-LINK|EU|N300-5|00000000):2.0\r\n"
381 "CPE510(TP-LINK|EU|N300-5|45550000):2.0\r\n"
382 "CPE510(TP-LINK|EU|N300-5|55530000):2.0\r\n"
383 "CPE510(TP-LINK|UN|N300-5|00000000):2.0\r\n"
384 "CPE510(TP-LINK|UN|N300-5|45550000):2.0\r\n"
385 "CPE510(TP-LINK|UN|N300-5|55530000):2.0\r\n"
386 "CPE510(TP-LINK|US|N300-5|00000000):2.0\r\n"
387 "CPE510(TP-LINK|US|N300-5|45550000):2.0\r\n"
388 "CPE510(TP-LINK|US|N300-5|55530000):2.0\r\n"
389 "CPE510(TP-LINK|UN|N300-5):2.0\r\n"
390 "CPE510(TP-LINK|EU|N300-5):2.0\r\n"
391 "CPE510(TP-LINK|US|N300-5):2.0\r\n",
396 {"fs-uboot", 0x00000, 0x20000},
397 {"partition-table", 0x20000, 0x02000},
398 {"default-mac", 0x30000, 0x00020},
399 {"product-info", 0x31100, 0x00100},
400 {"signature", 0x32000, 0x00400},
401 {"os-image", 0x40000, 0x300000},
402 {"file-system", 0x340000, 0x470000},
403 {"soft-version", 0x7b0000, 0x00100},
404 {"support-list", 0x7b1000, 0x00400},
405 {"user-config", 0x7c0000, 0x10000},
406 {"default-config", 0x7d0000, 0x10000},
407 {"log", 0x7e0000, 0x10000},
408 {"radio", 0x7f0000, 0x10000},
412 .first_sysupgrade_partition
= "os-image",
413 .last_sysupgrade_partition
= "support-list",
416 /** Firmware layout for the CPE510 V3 */
419 .vendor
= "CPE510(TP-LINK|UN|N300-5):3.0\r\n",
422 "CPE510(TP-LINK|EU|N300-5|00000000):3.0\r\n"
423 "CPE510(TP-LINK|EU|N300-5|45550000):3.0\r\n"
424 "CPE510(TP-LINK|EU|N300-5|55530000):3.0\r\n"
425 "CPE510(TP-LINK|UN|N300-5|00000000):3.0\r\n"
426 "CPE510(TP-LINK|UN|N300-5|45550000):3.0\r\n"
427 "CPE510(TP-LINK|UN|N300-5|55530000):3.0\r\n"
428 "CPE510(TP-LINK|US|N300-5|00000000):3.0\r\n"
429 "CPE510(TP-LINK|US|N300-5|45550000):3.0\r\n"
430 "CPE510(TP-LINK|US|N300-5|55530000):3.0\r\n"
431 "CPE510(TP-LINK|UN|N300-5):3.0\r\n"
432 "CPE510(TP-LINK|EU|N300-5):3.0\r\n"
433 "CPE510(TP-LINK|US|N300-5):3.0\r\n"
434 "CPE510(TP-LINK|UN|N300-5|00000000):3.20\r\n"
435 "CPE510(TP-LINK|US|N300-5|55530000):3.20\r\n"
436 "CPE510(TP-LINK|EU|N300-5|45550000):3.20\r\n",
441 {"fs-uboot", 0x00000, 0x20000},
442 {"partition-table", 0x20000, 0x02000},
443 {"default-mac", 0x30000, 0x00020},
444 {"product-info", 0x31100, 0x00100},
445 {"signature", 0x32000, 0x00400},
446 {"os-image", 0x40000, 0x300000},
447 {"file-system", 0x340000, 0x470000},
448 {"soft-version", 0x7b0000, 0x00100},
449 {"support-list", 0x7b1000, 0x00400},
450 {"user-config", 0x7c0000, 0x10000},
451 {"default-config", 0x7d0000, 0x10000},
452 {"log", 0x7e0000, 0x10000},
453 {"radio", 0x7f0000, 0x10000},
457 .first_sysupgrade_partition
= "os-image",
458 .last_sysupgrade_partition
= "support-list",
461 /** Firmware layout for the CPE610V1 */
464 .vendor
= "CPE610(TP-LINK|UN|N300-5|00000000):1.0\r\n",
467 "CPE610(TP-LINK|EU|N300-5|00000000):1.0\r\n"
468 "CPE610(TP-LINK|EU|N300-5|45550000):1.0\r\n"
469 "CPE610(TP-LINK|EU|N300-5|55530000):1.0\r\n"
470 "CPE610(TP-LINK|UN|N300-5|00000000):1.0\r\n"
471 "CPE610(TP-LINK|UN|N300-5|45550000):1.0\r\n"
472 "CPE610(TP-LINK|UN|N300-5|55530000):1.0\r\n"
473 "CPE610(TP-LINK|US|N300-5|55530000):1.0\r\n"
474 "CPE610(TP-LINK|UN|N300-5):1.0\r\n"
475 "CPE610(TP-LINK|EU|N300-5):1.0\r\n"
476 "CPE610(TP-LINK|US|N300-5):1.0\r\n",
481 {"fs-uboot", 0x00000, 0x20000},
482 {"partition-table", 0x20000, 0x02000},
483 {"default-mac", 0x30000, 0x00020},
484 {"product-info", 0x31100, 0x00100},
485 {"signature", 0x32000, 0x00400},
486 {"os-image", 0x40000, 0x300000},
487 {"file-system", 0x340000, 0x470000},
488 {"soft-version", 0x7b0000, 0x00100},
489 {"support-list", 0x7b1000, 0x00400},
490 {"user-config", 0x7c0000, 0x10000},
491 {"default-config", 0x7d0000, 0x10000},
492 {"log", 0x7e0000, 0x10000},
493 {"radio", 0x7f0000, 0x10000},
497 .first_sysupgrade_partition
= "os-image",
498 .last_sysupgrade_partition
= "support-list",
501 /** Firmware layout for the CPE610V2 */
504 .vendor
= "CPE610(TP-LINK|UN|N300-5|00000000):2.0\r\n",
507 "CPE610(TP-LINK|EU|N300-5|00000000):2.0\r\n"
508 "CPE610(TP-LINK|EU|N300-5|45550000):2.0\r\n"
509 "CPE610(TP-LINK|EU|N300-5|55530000):2.0\r\n"
510 "CPE610(TP-LINK|UN|N300-5|00000000):2.0\r\n"
511 "CPE610(TP-LINK|UN|N300-5|45550000):2.0\r\n"
512 "CPE610(TP-LINK|UN|N300-5|55530000):2.0\r\n"
513 "CPE610(TP-LINK|US|N300-5|55530000):2.0\r\n"
514 "CPE610(TP-LINK|UN|N300-5):2.0\r\n"
515 "CPE610(TP-LINK|EU|N300-5):2.0\r\n"
516 "CPE610(TP-LINK|US|N300-5):2.0\r\n",
521 {"fs-uboot", 0x00000, 0x20000},
522 {"partition-table", 0x20000, 0x02000},
523 {"default-mac", 0x30000, 0x00020},
524 {"product-info", 0x31100, 0x00100},
525 {"signature", 0x32000, 0x00400},
526 {"os-image", 0x40000, 0x300000},
527 {"file-system", 0x340000, 0x470000},
528 {"soft-version", 0x7b0000, 0x00100},
529 {"support-list", 0x7b1000, 0x00400},
530 {"user-config", 0x7c0000, 0x10000},
531 {"default-config", 0x7d0000, 0x10000},
532 {"log", 0x7e0000, 0x10000},
533 {"radio", 0x7f0000, 0x10000},
537 .first_sysupgrade_partition
= "os-image",
538 .last_sysupgrade_partition
= "support-list",
543 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
546 "WBS210(TP-LINK|UN|N300-2):1.20\r\n"
547 "WBS210(TP-LINK|US|N300-2):1.20\r\n"
548 "WBS210(TP-LINK|EU|N300-2):1.20\r\n",
553 {"fs-uboot", 0x00000, 0x20000},
554 {"partition-table", 0x20000, 0x02000},
555 {"default-mac", 0x30000, 0x00020},
556 {"product-info", 0x31100, 0x00100},
557 {"signature", 0x32000, 0x00400},
558 {"os-image", 0x40000, 0x300000},
559 {"file-system", 0x340000, 0x470000},
560 {"soft-version", 0x7b0000, 0x00100},
561 {"support-list", 0x7b1000, 0x00400},
562 {"user-config", 0x7c0000, 0x10000},
563 {"default-config", 0x7d0000, 0x10000},
564 {"log", 0x7e0000, 0x10000},
565 {"radio", 0x7f0000, 0x10000},
569 .first_sysupgrade_partition
= "os-image",
570 .last_sysupgrade_partition
= "support-list",
575 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
578 "WBS210(TP-LINK|UN|N300-2|00000000):2.0\r\n"
579 "WBS210(TP-LINK|US|N300-2|55530000):2.0\r\n"
580 "WBS210(TP-LINK|EU|N300-2|45550000):2.0\r\n",
585 {"fs-uboot", 0x00000, 0x20000},
586 {"partition-table", 0x20000, 0x02000},
587 {"default-mac", 0x30000, 0x00020},
588 {"product-info", 0x31100, 0x00100},
589 {"signature", 0x32000, 0x00400},
590 {"os-image", 0x40000, 0x300000},
591 {"file-system", 0x340000, 0x470000},
592 {"soft-version", 0x7b0000, 0x00100},
593 {"support-list", 0x7b1000, 0x00400},
594 {"user-config", 0x7c0000, 0x10000},
595 {"default-config", 0x7d0000, 0x10000},
596 {"log", 0x7e0000, 0x10000},
597 {"radio", 0x7f0000, 0x10000},
601 .first_sysupgrade_partition
= "os-image",
602 .last_sysupgrade_partition
= "support-list",
607 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
610 "WBS510(TP-LINK|UN|N300-5):1.20\r\n"
611 "WBS510(TP-LINK|US|N300-5):1.20\r\n"
612 "WBS510(TP-LINK|EU|N300-5):1.20\r\n"
613 "WBS510(TP-LINK|CA|N300-5):1.20\r\n",
618 {"fs-uboot", 0x00000, 0x20000},
619 {"partition-table", 0x20000, 0x02000},
620 {"default-mac", 0x30000, 0x00020},
621 {"product-info", 0x31100, 0x00100},
622 {"signature", 0x32000, 0x00400},
623 {"os-image", 0x40000, 0x300000},
624 {"file-system", 0x340000, 0x470000},
625 {"soft-version", 0x7b0000, 0x00100},
626 {"support-list", 0x7b1000, 0x00400},
627 {"user-config", 0x7c0000, 0x10000},
628 {"default-config", 0x7d0000, 0x10000},
629 {"log", 0x7e0000, 0x10000},
630 {"radio", 0x7f0000, 0x10000},
634 .first_sysupgrade_partition
= "os-image",
635 .last_sysupgrade_partition
= "support-list",
640 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
643 "WBS510(TP-LINK|UN|N300-5|00000000):2.0\r\n"
644 "WBS510(TP-LINK|US|N300-5|55530000):2.0\r\n"
645 "WBS510(TP-LINK|EU|N300-5|45550000):2.0\r\n"
646 "WBS510(TP-LINK|CA|N300-5|43410000):2.0\r\n",
651 {"fs-uboot", 0x00000, 0x20000},
652 {"partition-table", 0x20000, 0x02000},
653 {"default-mac", 0x30000, 0x00020},
654 {"product-info", 0x31100, 0x00100},
655 {"signature", 0x32000, 0x00400},
656 {"os-image", 0x40000, 0x300000},
657 {"file-system", 0x340000, 0x470000},
658 {"soft-version", 0x7b0000, 0x00100},
659 {"support-list", 0x7b1000, 0x00400},
660 {"user-config", 0x7c0000, 0x10000},
661 {"default-config", 0x7d0000, 0x10000},
662 {"log", 0x7e0000, 0x10000},
663 {"radio", 0x7f0000, 0x10000},
667 .first_sysupgrade_partition
= "os-image",
668 .last_sysupgrade_partition
= "support-list",
671 /** Firmware layout for the AD7200 */
677 "{product_name:Talon AD7200,product_ver:1.0.0,special_id:00000000}\r\n",
682 {"SBL1", 0x00000, 0x20000},
683 {"MIBIB", 0x20000, 0x20000},
684 {"SBL2", 0x40000, 0x20000},
685 {"SBL3", 0x60000, 0x30000},
686 {"DDRCONFIG", 0x90000, 0x10000},
687 {"SSD", 0xa0000, 0x10000},
688 {"TZ", 0xb0000, 0x30000},
689 {"RPM", 0xe0000, 0x20000},
690 {"fs-uboot", 0x100000, 0x70000},
691 {"uboot-env", 0x170000, 0x40000},
692 {"radio", 0x1b0000, 0x40000},
693 {"os-image", 0x1f0000, 0x400000},
694 {"file-system", 0x5f0000, 0x1900000},
695 {"default-mac", 0x1ef0000, 0x00200},
696 {"pin", 0x1ef0200, 0x00200},
697 {"device-id", 0x1ef0400, 0x00200},
698 {"product-info", 0x1ef0600, 0x0fa00},
699 {"partition-table", 0x1f00000, 0x10000},
700 {"soft-version", 0x1f10000, 0x10000},
701 {"support-list", 0x1f20000, 0x10000},
702 {"profile", 0x1f30000, 0x10000},
703 {"default-config", 0x1f40000, 0x10000},
704 {"user-config", 0x1f50000, 0x40000},
705 {"qos-db", 0x1f90000, 0x40000},
706 {"usb-config", 0x1fd0000, 0x10000},
707 {"log", 0x1fe0000, 0x20000},
711 .first_sysupgrade_partition
= "os-image",
712 .last_sysupgrade_partition
= "file-system"
715 /** Firmware layout for the C2600 */
721 "{product_name:Archer C2600,product_ver:1.0.0,special_id:00000000}\r\n",
726 We use a bigger os-image partition than the stock images (and thus
727 smaller file-system), as our kernel doesn't fit in the stock firmware's
728 2 MB os-image since kernel 4.14.
731 {"SBL1", 0x00000, 0x20000},
732 {"MIBIB", 0x20000, 0x20000},
733 {"SBL2", 0x40000, 0x20000},
734 {"SBL3", 0x60000, 0x30000},
735 {"DDRCONFIG", 0x90000, 0x10000},
736 {"SSD", 0xa0000, 0x10000},
737 {"TZ", 0xb0000, 0x30000},
738 {"RPM", 0xe0000, 0x20000},
739 {"fs-uboot", 0x100000, 0x70000},
740 {"uboot-env", 0x170000, 0x40000},
741 {"radio", 0x1b0000, 0x40000},
742 {"os-image", 0x1f0000, 0x400000}, /* Stock: base 0x1f0000 size 0x200000 */
743 {"file-system", 0x5f0000, 0x1900000}, /* Stock: base 0x3f0000 size 0x1b00000 */
744 {"default-mac", 0x1ef0000, 0x00200},
745 {"pin", 0x1ef0200, 0x00200},
746 {"product-info", 0x1ef0400, 0x0fc00},
747 {"partition-table", 0x1f00000, 0x10000},
748 {"soft-version", 0x1f10000, 0x10000},
749 {"support-list", 0x1f20000, 0x10000},
750 {"profile", 0x1f30000, 0x10000},
751 {"default-config", 0x1f40000, 0x10000},
752 {"user-config", 0x1f50000, 0x40000},
753 {"qos-db", 0x1f90000, 0x40000},
754 {"usb-config", 0x1fd0000, 0x10000},
755 {"log", 0x1fe0000, 0x20000},
759 .first_sysupgrade_partition
= "os-image",
760 .last_sysupgrade_partition
= "file-system"
763 /** Firmware layout for the A7-V5 */
765 .id
= "ARCHER-A7-V5",
768 "{product_name:Archer A7,product_ver:5.0.0,special_id:45550000}\n"
769 "{product_name:Archer A7,product_ver:5.0.0,special_id:55530000}\n"
770 "{product_name:Archer A7,product_ver:5.0.0,special_id:43410000}\n"
771 "{product_name:Archer A7,product_ver:5.0.0,special_id:4A500000}\n"
772 "{product_name:Archer A7,product_ver:5.0.0,special_id:54570000}\n"
773 "{product_name:Archer A7,product_ver:5.0.0,special_id:52550000}\n",
775 .soft_ver
= "soft_ver:1.0.0\n",
777 /* We're using a dynamic kernel/rootfs split here */
779 {"factory-boot", 0x00000, 0x20000},
780 {"fs-uboot", 0x20000, 0x20000},
781 {"firmware", 0x40000, 0xec0000}, /* Stock: name os-image base 0x40000 size 0x120000 */
782 /* Stock: name file-system base 0x160000 size 0xda0000 */
783 {"default-mac", 0xf40000, 0x00200},
784 {"pin", 0xf40200, 0x00200},
785 {"device-id", 0xf40400, 0x00100},
786 {"product-info", 0xf40500, 0x0fb00},
787 {"soft-version", 0xf50000, 0x00100},
788 {"extra-para", 0xf51000, 0x01000},
789 {"support-list", 0xf52000, 0x0a000},
790 {"profile", 0xf5c000, 0x04000},
791 {"default-config", 0xf60000, 0x10000},
792 {"user-config", 0xf70000, 0x40000},
793 {"certificate", 0xfb0000, 0x10000},
794 {"partition-table", 0xfc0000, 0x10000},
795 {"log", 0xfd0000, 0x20000},
796 {"radio", 0xff0000, 0x10000},
800 .first_sysupgrade_partition
= "os-image",
801 .last_sysupgrade_partition
= "file-system",
804 /** Firmware layout for the C2v3 */
806 .id
= "ARCHER-C2-V3",
809 "{product_name:ArcherC2,product_ver:3.0.0,special_id:00000000}\n"
810 "{product_name:ArcherC2,product_ver:3.0.0,special_id:55530000}\n"
811 "{product_name:ArcherC2,product_ver:3.0.0,special_id:45550000}\n",
813 .soft_ver
= "soft_ver:3.0.1\n",
815 /** We're using a dynamic kernel/rootfs split here */
818 {"factory-boot", 0x00000, 0x20000},
819 {"fs-uboot", 0x20000, 0x10000},
820 {"firmware", 0x30000, 0x7a0000},
821 {"user-config", 0x7d0000, 0x04000},
822 {"default-mac", 0x7e0000, 0x00100},
823 {"device-id", 0x7e0100, 0x00100},
824 {"extra-para", 0x7e0200, 0x00100},
825 {"pin", 0x7e0300, 0x00100},
826 {"support-list", 0x7e0400, 0x00400},
827 {"soft-version", 0x7e0800, 0x00400},
828 {"product-info", 0x7e0c00, 0x01400},
829 {"partition-table", 0x7e2000, 0x01000},
830 {"profile", 0x7e3000, 0x01000},
831 {"default-config", 0x7e4000, 0x04000},
832 {"merge-config", 0x7ec000, 0x02000},
833 {"qos-db", 0x7ee000, 0x02000},
834 {"radio", 0x7f0000, 0x10000},
838 .first_sysupgrade_partition
= "os-image",
839 .last_sysupgrade_partition
= "file-system",
842 /** Firmware layout for the C25v1 */
844 .id
= "ARCHER-C25-V1",
847 "{product_name:ArcherC25,product_ver:1.0.0,special_id:00000000}\n"
848 "{product_name:ArcherC25,product_ver:1.0.0,special_id:55530000}\n"
849 "{product_name:ArcherC25,product_ver:1.0.0,special_id:45550000}\n",
851 .soft_ver
= "soft_ver:1.0.0\n",
853 /* We're using a dynamic kernel/rootfs split here */
855 {"factory-boot", 0x00000, 0x20000},
856 {"fs-uboot", 0x20000, 0x10000},
857 {"firmware", 0x30000, 0x7a0000}, /* Stock: name os-image base 0x30000 size 0x100000 */
858 /* Stock: name file-system base 0x130000 size 0x6a0000 */
859 {"user-config", 0x7d0000, 0x04000},
860 {"default-mac", 0x7e0000, 0x00100},
861 {"device-id", 0x7e0100, 0x00100},
862 {"extra-para", 0x7e0200, 0x00100},
863 {"pin", 0x7e0300, 0x00100},
864 {"support-list", 0x7e0400, 0x00400},
865 {"soft-version", 0x7e0800, 0x00400},
866 {"product-info", 0x7e0c00, 0x01400},
867 {"partition-table", 0x7e2000, 0x01000},
868 {"profile", 0x7e3000, 0x01000},
869 {"default-config", 0x7e4000, 0x04000},
870 {"merge-config", 0x7ec000, 0x02000},
871 {"qos-db", 0x7ee000, 0x02000},
872 {"radio", 0x7f0000, 0x10000},
876 .first_sysupgrade_partition
= "os-image",
877 .last_sysupgrade_partition
= "file-system",
880 /** Firmware layout for the C58v1 */
882 .id
= "ARCHER-C58-V1",
886 "{product_name:Archer C58,product_ver:1.0.0,special_id:00000000}\r\n"
887 "{product_name:Archer C58,product_ver:1.0.0,special_id:45550000}\r\n"
888 "{product_name:Archer C58,product_ver:1.0.0,special_id:55530000}\r\n",
890 .soft_ver
= "soft_ver:1.0.0\n",
893 {"fs-uboot", 0x00000, 0x10000},
894 {"default-mac", 0x10000, 0x00200},
895 {"pin", 0x10200, 0x00200},
896 {"product-info", 0x10400, 0x00100},
897 {"partition-table", 0x10500, 0x00800},
898 {"soft-version", 0x11300, 0x00200},
899 {"support-list", 0x11500, 0x00100},
900 {"device-id", 0x11600, 0x00100},
901 {"profile", 0x11700, 0x03900},
902 {"default-config", 0x15000, 0x04000},
903 {"user-config", 0x19000, 0x04000},
904 {"firmware", 0x20000, 0x7c8000},
905 {"certyficate", 0x7e8000, 0x08000},
906 {"radio", 0x7f0000, 0x10000},
910 .first_sysupgrade_partition
= "os-image",
911 .last_sysupgrade_partition
= "file-system",
914 /** Firmware layout for the C59v1 */
916 .id
= "ARCHER-C59-V1",
920 "{product_name:Archer C59,product_ver:1.0.0,special_id:00000000}\r\n"
921 "{product_name:Archer C59,product_ver:1.0.0,special_id:45550000}\r\n"
922 "{product_name:Archer C59,product_ver:1.0.0,special_id:52550000}\r\n"
923 "{product_name:Archer C59,product_ver:1.0.0,special_id:55530000}\r\n",
925 .soft_ver
= "soft_ver:1.0.0\n",
927 /* We're using a dynamic kernel/rootfs split here */
929 {"fs-uboot", 0x00000, 0x10000},
930 {"default-mac", 0x10000, 0x00200},
931 {"pin", 0x10200, 0x00200},
932 {"device-id", 0x10400, 0x00100},
933 {"product-info", 0x10500, 0x0fb00},
934 {"firmware", 0x20000, 0xe30000},
935 {"partition-table", 0xe50000, 0x10000},
936 {"soft-version", 0xe60000, 0x10000},
937 {"support-list", 0xe70000, 0x10000},
938 {"profile", 0xe80000, 0x10000},
939 {"default-config", 0xe90000, 0x10000},
940 {"user-config", 0xea0000, 0x40000},
941 {"usb-config", 0xee0000, 0x10000},
942 {"certificate", 0xef0000, 0x10000},
943 {"qos-db", 0xf00000, 0x40000},
944 {"log", 0xfe0000, 0x10000},
945 {"radio", 0xff0000, 0x10000},
949 .first_sysupgrade_partition
= "os-image",
950 .last_sysupgrade_partition
= "file-system",
953 /** Firmware layout for the C59v2 */
955 .id
= "ARCHER-C59-V2",
959 "{product_name:Archer C59,product_ver:2.0.0,special_id:00000000}\r\n"
960 "{product_name:Archer C59,product_ver:2.0.0,special_id:45550000}\r\n"
961 "{product_name:Archer C59,product_ver:2.0.0,special_id:55530000}\r\n",
963 .soft_ver
= "soft_ver:2.0.0 Build 20161206 rel.7303\n",
965 /** We're using a dynamic kernel/rootfs split here */
967 {"factory-boot", 0x00000, 0x20000},
968 {"fs-uboot", 0x20000, 0x10000},
969 {"default-mac", 0x30000, 0x00200},
970 {"pin", 0x30200, 0x00200},
971 {"device-id", 0x30400, 0x00100},
972 {"product-info", 0x30500, 0x0fb00},
973 {"firmware", 0x40000, 0xe10000},
974 {"partition-table", 0xe50000, 0x10000},
975 {"soft-version", 0xe60000, 0x10000},
976 {"support-list", 0xe70000, 0x10000},
977 {"profile", 0xe80000, 0x10000},
978 {"default-config", 0xe90000, 0x10000},
979 {"user-config", 0xea0000, 0x40000},
980 {"usb-config", 0xee0000, 0x10000},
981 {"certificate", 0xef0000, 0x10000},
982 {"extra-para", 0xf00000, 0x10000},
983 {"qos-db", 0xf10000, 0x30000},
984 {"log", 0xfe0000, 0x10000},
985 {"radio", 0xff0000, 0x10000},
989 .first_sysupgrade_partition
= "os-image",
990 .last_sysupgrade_partition
= "file-system",
993 /** Firmware layout for the Archer C6 v2 (EU/RU/JP) */
995 .id
= "ARCHER-C6-V2",
999 "{product_name:Archer C6,product_ver:2.0.0,special_id:45550000}\r\n"
1000 "{product_name:Archer C6,product_ver:2.0.0,special_id:52550000}\r\n"
1001 "{product_name:Archer C6,product_ver:2.0.0,special_id:4A500000}\r\n",
1003 .soft_ver
= "soft_ver:1.9.1\n",
1006 {"fs-uboot", 0x00000, 0x20000},
1007 {"default-mac", 0x20000, 0x00200},
1008 {"pin", 0x20200, 0x00100},
1009 {"product-info", 0x20300, 0x00200},
1010 {"device-id", 0x20500, 0x0fb00},
1011 {"firmware", 0x30000, 0x7a9400},
1012 {"soft-version", 0x7d9400, 0x00100},
1013 {"extra-para", 0x7d9500, 0x00100},
1014 {"support-list", 0x7d9600, 0x00200},
1015 {"profile", 0x7d9800, 0x03000},
1016 {"default-config", 0x7dc800, 0x03000},
1017 {"partition-table", 0x7df800, 0x00800},
1018 {"user-config", 0x7e0000, 0x0c000},
1019 {"certificate", 0x7ec000, 0x04000},
1020 {"radio", 0x7f0000, 0x10000},
1024 .first_sysupgrade_partition
= "os-image",
1025 .last_sysupgrade_partition
= "file-system",
1028 /** Firmware layout for the Archer C6 v2 (US) and A6 v2 (US/TW) */
1030 .id
= "ARCHER-C6-V2-US",
1034 "{product_name:Archer A6,product_ver:2.0.0,special_id:55530000}\n"
1035 "{product_name:Archer A6,product_ver:2.0.0,special_id:54570000}\n"
1036 "{product_name:Archer C6,product_ver:2.0.0,special_id:55530000}\n",
1038 .soft_ver
= "soft_ver:1.9.1\n",
1041 {"factory-boot", 0x00000, 0x20000},
1042 {"default-mac", 0x20000, 0x00200},
1043 {"pin", 0x20200, 0x00100},
1044 {"product-info", 0x20300, 0x00200},
1045 {"device-id", 0x20500, 0x0fb00},
1046 {"fs-uboot", 0x30000, 0x20000},
1047 {"firmware", 0x50000, 0xf89400},
1048 {"soft-version", 0xfd9400, 0x00100},
1049 {"extra-para", 0xfd9500, 0x00100},
1050 {"support-list", 0xfd9600, 0x00200},
1051 {"profile", 0xfd9800, 0x03000},
1052 {"default-config", 0xfdc800, 0x03000},
1053 {"partition-table", 0xfdf800, 0x00800},
1054 {"user-config", 0xfe0000, 0x0c000},
1055 {"certificate", 0xfec000, 0x04000},
1056 {"radio", 0xff0000, 0x10000},
1059 .first_sysupgrade_partition
= "os-image",
1060 .last_sysupgrade_partition
= "file-system",
1063 /** Firmware layout for the C60v1 */
1065 .id
= "ARCHER-C60-V1",
1069 "{product_name:Archer C60,product_ver:1.0.0,special_id:00000000}\r\n"
1070 "{product_name:Archer C60,product_ver:1.0.0,special_id:45550000}\r\n"
1071 "{product_name:Archer C60,product_ver:1.0.0,special_id:55530000}\r\n",
1073 .soft_ver
= "soft_ver:1.0.0\n",
1076 {"fs-uboot", 0x00000, 0x10000},
1077 {"default-mac", 0x10000, 0x00200},
1078 {"pin", 0x10200, 0x00200},
1079 {"product-info", 0x10400, 0x00100},
1080 {"partition-table", 0x10500, 0x00800},
1081 {"soft-version", 0x11300, 0x00200},
1082 {"support-list", 0x11500, 0x00100},
1083 {"device-id", 0x11600, 0x00100},
1084 {"profile", 0x11700, 0x03900},
1085 {"default-config", 0x15000, 0x04000},
1086 {"user-config", 0x19000, 0x04000},
1087 {"firmware", 0x20000, 0x7c8000},
1088 {"certyficate", 0x7e8000, 0x08000},
1089 {"radio", 0x7f0000, 0x10000},
1093 .first_sysupgrade_partition
= "os-image",
1094 .last_sysupgrade_partition
= "file-system",
1097 /** Firmware layout for the C60v2 */
1099 .id
= "ARCHER-C60-V2",
1103 "{product_name:Archer C60,product_ver:2.0.0,special_id:42520000}\r\n"
1104 "{product_name:Archer C60,product_ver:2.0.0,special_id:45550000}\r\n"
1105 "{product_name:Archer C60,product_ver:2.0.0,special_id:55530000}\r\n",
1107 .soft_ver
= "soft_ver:2.0.0\n",
1110 {"factory-boot", 0x00000, 0x1fb00},
1111 {"default-mac", 0x1fb00, 0x00200},
1112 {"pin", 0x1fd00, 0x00100},
1113 {"product-info", 0x1fe00, 0x00100},
1114 {"device-id", 0x1ff00, 0x00100},
1115 {"fs-uboot", 0x20000, 0x10000},
1116 {"firmware", 0x30000, 0x7a0000},
1117 {"soft-version", 0x7d9500, 0x00100},
1118 {"support-list", 0x7d9600, 0x00100},
1119 {"extra-para", 0x7d9700, 0x00100},
1120 {"profile", 0x7d9800, 0x03000},
1121 {"default-config", 0x7dc800, 0x03000},
1122 {"partition-table", 0x7df800, 0x00800},
1123 {"user-config", 0x7e0000, 0x0c000},
1124 {"certificate", 0x7ec000, 0x04000},
1125 {"radio", 0x7f0000, 0x10000},
1129 .first_sysupgrade_partition
= "os-image",
1130 .last_sysupgrade_partition
= "file-system",
1133 /** Firmware layout for the C60v3 */
1135 .id
= "ARCHER-C60-V3",
1139 "{product_name:Archer C60,product_ver:3.0.0,special_id:42520000}\r\n"
1140 "{product_name:Archer C60,product_ver:3.0.0,special_id:45550000}\r\n"
1141 "{product_name:Archer C60,product_ver:3.0.0,special_id:55530000}\r\n",
1143 .soft_ver
= "soft_ver:3.0.0\n",
1146 {"factory-boot", 0x00000, 0x1fb00},
1147 {"default-mac", 0x1fb00, 0x00200},
1148 {"pin", 0x1fd00, 0x00100},
1149 {"product-info", 0x1fe00, 0x00100},
1150 {"device-id", 0x1ff00, 0x00100},
1151 {"fs-uboot", 0x20000, 0x10000},
1152 {"firmware", 0x30000, 0x7a0000},
1153 {"soft-version", 0x7d9500, 0x00100},
1154 {"support-list", 0x7d9600, 0x00100},
1155 {"extra-para", 0x7d9700, 0x00100},
1156 {"profile", 0x7d9800, 0x03000},
1157 {"default-config", 0x7dc800, 0x03000},
1158 {"partition-table", 0x7df800, 0x00800},
1159 {"user-config", 0x7e0000, 0x0c000},
1160 {"certificate", 0x7ec000, 0x04000},
1161 {"radio", 0x7f0000, 0x10000},
1165 .first_sysupgrade_partition
= "os-image",
1166 .last_sysupgrade_partition
= "file-system",
1169 /** Firmware layout for the C5 */
1171 .id
= "ARCHER-C5-V2",
1175 "{product_name:ArcherC5,product_ver:2.0.0,special_id:00000000}\r\n"
1176 "{product_name:ArcherC5,product_ver:2.0.0,special_id:55530000}\r\n"
1177 "{product_name:ArcherC5,product_ver:2.0.0,special_id:4A500000}\r\n", /* JP version */
1182 {"fs-uboot", 0x00000, 0x40000},
1183 {"os-image", 0x40000, 0x200000},
1184 {"file-system", 0x240000, 0xc00000},
1185 {"default-mac", 0xe40000, 0x00200},
1186 {"pin", 0xe40200, 0x00200},
1187 {"product-info", 0xe40400, 0x00200},
1188 {"partition-table", 0xe50000, 0x10000},
1189 {"soft-version", 0xe60000, 0x00200},
1190 {"support-list", 0xe61000, 0x0f000},
1191 {"profile", 0xe70000, 0x10000},
1192 {"default-config", 0xe80000, 0x10000},
1193 {"user-config", 0xe90000, 0x50000},
1194 {"log", 0xee0000, 0x100000},
1195 {"radio_bk", 0xfe0000, 0x10000},
1196 {"radio", 0xff0000, 0x10000},
1200 .first_sysupgrade_partition
= "os-image",
1201 .last_sysupgrade_partition
= "file-system"
1204 /** Firmware layout for the C7 */
1206 .id
= "ARCHER-C7-V4",
1209 "{product_name:Archer C7,product_ver:4.0.0,special_id:00000000}\n"
1210 "{product_name:Archer C7,product_ver:4.0.0,special_id:41550000}\n"
1211 "{product_name:Archer C7,product_ver:4.0.0,special_id:45550000}\n"
1212 "{product_name:Archer C7,product_ver:4.0.0,special_id:4B520000}\n"
1213 "{product_name:Archer C7,product_ver:4.0.0,special_id:42520000}\n"
1214 "{product_name:Archer C7,product_ver:4.0.0,special_id:4A500000}\n"
1215 "{product_name:Archer C7,product_ver:4.0.0,special_id:52550000}\n"
1216 "{product_name:Archer C7,product_ver:4.0.0,special_id:54570000}\n"
1217 "{product_name:Archer C7,product_ver:4.0.0,special_id:55530000}\n"
1218 "{product_name:Archer C7,product_ver:4.0.0,special_id:43410000}\n",
1220 .soft_ver
= "soft_ver:1.0.0\n",
1222 /* We're using a dynamic kernel/rootfs split here */
1224 {"factory-boot", 0x00000, 0x20000},
1225 {"fs-uboot", 0x20000, 0x20000},
1226 {"firmware", 0x40000, 0xEC0000}, /* Stock: name os-image base 0x40000 size 0x120000 */
1227 /* Stock: name file-system base 0x160000 size 0xda0000 */
1228 {"default-mac", 0xf00000, 0x00200},
1229 {"pin", 0xf00200, 0x00200},
1230 {"device-id", 0xf00400, 0x00100},
1231 {"product-info", 0xf00500, 0x0fb00},
1232 {"soft-version", 0xf10000, 0x00100},
1233 {"extra-para", 0xf11000, 0x01000},
1234 {"support-list", 0xf12000, 0x0a000},
1235 {"profile", 0xf1c000, 0x04000},
1236 {"default-config", 0xf20000, 0x10000},
1237 {"user-config", 0xf30000, 0x40000},
1238 {"qos-db", 0xf70000, 0x40000},
1239 {"certificate", 0xfb0000, 0x10000},
1240 {"partition-table", 0xfc0000, 0x10000},
1241 {"log", 0xfd0000, 0x20000},
1242 {"radio", 0xff0000, 0x10000},
1246 .first_sysupgrade_partition
= "os-image",
1247 .last_sysupgrade_partition
= "file-system",
1250 /** Firmware layout for the C7 v5*/
1252 .id
= "ARCHER-C7-V5",
1255 "{product_name:Archer C7,product_ver:5.0.0,special_id:00000000}\n"
1256 "{product_name:Archer C7,product_ver:5.0.0,special_id:45550000}\n"
1257 "{product_name:Archer C7,product_ver:5.0.0,special_id:55530000}\n"
1258 "{product_name:Archer C7,product_ver:5.0.0,special_id:43410000}\n"
1259 "{product_name:Archer C7,product_ver:5.0.0,special_id:4A500000}\n"
1260 "{product_name:Archer C7,product_ver:5.0.0,special_id:54570000}\n"
1261 "{product_name:Archer C7,product_ver:5.0.0,special_id:52550000}\n"
1262 "{product_name:Archer C7,product_ver:5.0.0,special_id:4B520000}\n",
1265 .soft_ver
= "soft_ver:1.0.0\n",
1267 /* We're using a dynamic kernel/rootfs split here */
1269 {"factory-boot", 0x00000, 0x20000},
1270 {"fs-uboot", 0x20000, 0x20000},
1271 {"partition-table", 0x40000, 0x10000},
1272 {"radio", 0x50000, 0x10000},
1273 {"default-mac", 0x60000, 0x00200},
1274 {"pin", 0x60200, 0x00200},
1275 {"device-id", 0x60400, 0x00100},
1276 {"product-info", 0x60500, 0x0fb00},
1277 {"soft-version", 0x70000, 0x01000},
1278 {"extra-para", 0x71000, 0x01000},
1279 {"support-list", 0x72000, 0x0a000},
1280 {"profile", 0x7c000, 0x04000},
1281 {"user-config", 0x80000, 0x40000},
1284 {"firmware", 0xc0000, 0xf00000}, /* Stock: name os-image base 0xc0000 size 0x120000 */
1285 /* Stock: name file-system base 0x1e0000 size 0xde0000 */
1287 {"log", 0xfc0000, 0x20000},
1288 {"certificate", 0xfe0000, 0x10000},
1289 {"default-config", 0xff0000, 0x10000},
1294 .first_sysupgrade_partition
= "os-image",
1295 .last_sysupgrade_partition
= "file-system",
1298 /** Firmware layout for the C9 */
1304 "{product_name:ArcherC9,"
1305 "product_ver:1.0.0,"
1306 "special_id:00000000}\n",
1311 {"fs-uboot", 0x00000, 0x40000},
1312 {"os-image", 0x40000, 0x200000},
1313 {"file-system", 0x240000, 0xc00000},
1314 {"default-mac", 0xe40000, 0x00200},
1315 {"pin", 0xe40200, 0x00200},
1316 {"product-info", 0xe40400, 0x00200},
1317 {"partition-table", 0xe50000, 0x10000},
1318 {"soft-version", 0xe60000, 0x00200},
1319 {"support-list", 0xe61000, 0x0f000},
1320 {"profile", 0xe70000, 0x10000},
1321 {"default-config", 0xe80000, 0x10000},
1322 {"user-config", 0xe90000, 0x50000},
1323 {"log", 0xee0000, 0x100000},
1324 {"radio_bk", 0xfe0000, 0x10000},
1325 {"radio", 0xff0000, 0x10000},
1329 .first_sysupgrade_partition
= "os-image",
1330 .last_sysupgrade_partition
= "file-system"
1333 /** Firmware layout for the EAP120 */
1336 .vendor
= "EAP120(TP-LINK|UN|N300-2):1.0\r\n",
1339 "EAP120(TP-LINK|UN|N300-2):1.0\r\n",
1344 {"fs-uboot", 0x00000, 0x20000},
1345 {"partition-table", 0x20000, 0x02000},
1346 {"default-mac", 0x30000, 0x00020},
1347 {"support-list", 0x31000, 0x00100},
1348 {"product-info", 0x31100, 0x00100},
1349 {"soft-version", 0x32000, 0x00100},
1350 {"os-image", 0x40000, 0x180000},
1351 {"file-system", 0x1c0000, 0x600000},
1352 {"user-config", 0x7c0000, 0x10000},
1353 {"backup-config", 0x7d0000, 0x10000},
1354 {"log", 0x7e0000, 0x10000},
1355 {"radio", 0x7f0000, 0x10000},
1359 .first_sysupgrade_partition
= "os-image",
1360 .last_sysupgrade_partition
= "file-system"
1363 /** Firmware layout for the EAP225-Outdoor v1 */
1365 .id
= "EAP225-OUTDOOR-V1",
1368 "EAP225-Outdoor(TP-Link|UN|AC1200-D):1.0\r\n",
1369 .part_trail
= PART_TRAIL_NONE
,
1371 .soft_ver_compat_level
= 1,
1374 {"fs-uboot", 0x00000, 0x20000},
1375 {"partition-table", 0x20000, 0x02000},
1376 {"default-mac", 0x30000, 0x01000},
1377 {"support-list", 0x31000, 0x00100},
1378 {"product-info", 0x31100, 0x00400},
1379 {"soft-version", 0x32000, 0x00100},
1380 {"firmware", 0x40000, 0xd80000},
1381 {"user-config", 0xdc0000, 0x30000},
1382 {"mutil-log", 0xf30000, 0x80000},
1383 {"oops", 0xfb0000, 0x40000},
1384 {"radio", 0xff0000, 0x10000},
1388 .first_sysupgrade_partition
= "os-image",
1389 .last_sysupgrade_partition
= "file-system"
1392 /** Firmware layout for the EAP225 v3 */
1397 "EAP225(TP-Link|UN|AC1350-D):3.0\r\n",
1398 .part_trail
= PART_TRAIL_NONE
,
1400 .soft_ver_compat_level
= 1,
1403 {"fs-uboot", 0x00000, 0x20000},
1404 {"partition-table", 0x20000, 0x02000},
1405 {"default-mac", 0x30000, 0x01000},
1406 {"support-list", 0x31000, 0x00100},
1407 {"product-info", 0x31100, 0x00400},
1408 {"soft-version", 0x32000, 0x00100},
1409 {"firmware", 0x40000, 0xd80000},
1410 {"user-config", 0xdc0000, 0x30000},
1411 {"mutil-log", 0xf30000, 0x80000},
1412 {"oops", 0xfb0000, 0x40000},
1413 {"radio", 0xff0000, 0x10000},
1417 .first_sysupgrade_partition
= "os-image",
1418 .last_sysupgrade_partition
= "file-system"
1421 /** Firmware layout for the EAP225-Wall v2 */
1423 .id
= "EAP225-WALL-V2",
1426 "EAP225-Wall(TP-Link|UN|AC1200-D):2.0\r\n",
1427 .part_trail
= PART_TRAIL_NONE
,
1429 .soft_ver_compat_level
= 1,
1432 {"fs-uboot", 0x00000, 0x20000},
1433 {"partition-table", 0x20000, 0x02000},
1434 {"default-mac", 0x30000, 0x01000},
1435 {"support-list", 0x31000, 0x00100},
1436 {"product-info", 0x31100, 0x00400},
1437 {"soft-version", 0x32000, 0x00100},
1438 {"firmware", 0x40000, 0xd80000},
1439 {"user-config", 0xdc0000, 0x30000},
1440 {"mutil-log", 0xf30000, 0x80000},
1441 {"oops", 0xfb0000, 0x40000},
1442 {"radio", 0xff0000, 0x10000},
1446 .first_sysupgrade_partition
= "os-image",
1447 .last_sysupgrade_partition
= "file-system"
1450 /** Firmware layout for the EAP245 v1 */
1455 "EAP245(TP-LINK|UN|AC1750-D):1.0\r\n",
1456 .part_trail
= PART_TRAIL_NONE
,
1460 {"fs-uboot", 0x00000, 0x20000},
1461 {"partition-table", 0x20000, 0x02000},
1462 {"default-mac", 0x30000, 0x01000},
1463 {"support-list", 0x31000, 0x00100},
1464 {"product-info", 0x31100, 0x00400},
1465 {"soft-version", 0x32000, 0x00100},
1466 {"firmware", 0x40000, 0xd80000},
1467 {"user-config", 0xdc0000, 0x30000},
1468 {"radio", 0xff0000, 0x10000},
1472 .first_sysupgrade_partition
= "os-image",
1473 .last_sysupgrade_partition
= "file-system"
1476 /** Firmware layout for the EAP245 v3 */
1481 "EAP245(TP-Link|UN|AC1750-D):3.0\r\n",
1482 .part_trail
= PART_TRAIL_NONE
,
1484 .soft_ver_compat_level
= 1,
1486 /** Firmware partition with dynamic kernel/rootfs split */
1488 {"factroy-boot", 0x00000, 0x40000},
1489 {"fs-uboot", 0x40000, 0x40000},
1490 {"partition-table", 0x80000, 0x10000},
1491 {"default-mac", 0x90000, 0x01000},
1492 {"support-list", 0x91000, 0x00100},
1493 {"product-info", 0x91100, 0x00400},
1494 {"soft-version", 0x92000, 0x00100},
1495 {"radio", 0xa0000, 0x10000},
1496 {"extra-para", 0xb0000, 0x10000},
1497 {"firmware", 0xc0000, 0xe40000},
1498 {"config", 0xf00000, 0x30000},
1499 {"mutil-log", 0xf30000, 0x80000},
1500 {"oops", 0xfb0000, 0x40000},
1504 .first_sysupgrade_partition
= "os-image",
1505 .last_sysupgrade_partition
= "file-system"
1508 /** Firmware layout for the TL-WA850RE v2 */
1510 .id
= "TLWA850REV2",
1514 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:55530000}\n"
1515 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:00000000}\n"
1516 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:55534100}\n"
1517 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:45550000}\n"
1518 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:4B520000}\n"
1519 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:42520000}\n"
1520 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:4A500000}\n"
1521 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:43410000}\n"
1522 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:41550000}\n"
1523 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:52550000}\n",
1528 576KB were moved from file-system to os-image
1529 in comparison to the stock image
1532 {"fs-uboot", 0x00000, 0x20000},
1533 {"firmware", 0x20000, 0x390000},
1534 {"partition-table", 0x3b0000, 0x02000},
1535 {"default-mac", 0x3c0000, 0x00020},
1536 {"pin", 0x3c0100, 0x00020},
1537 {"product-info", 0x3c1000, 0x01000},
1538 {"soft-version", 0x3c2000, 0x00100},
1539 {"support-list", 0x3c3000, 0x01000},
1540 {"profile", 0x3c4000, 0x08000},
1541 {"user-config", 0x3d0000, 0x10000},
1542 {"default-config", 0x3e0000, 0x10000},
1543 {"radio", 0x3f0000, 0x10000},
1547 .first_sysupgrade_partition
= "os-image",
1548 .last_sysupgrade_partition
= "file-system"
1551 /** Firmware layout for the TL-WA855RE v1 */
1553 .id
= "TLWA855REV1",
1557 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:00000000}\n"
1558 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:55530000}\n"
1559 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:45550000}\n"
1560 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:4B520000}\n"
1561 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:42520000}\n"
1562 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:4A500000}\n"
1563 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:43410000}\n"
1564 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:41550000}\n"
1565 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:52550000}\n",
1570 {"fs-uboot", 0x00000, 0x20000},
1571 {"os-image", 0x20000, 0x150000},
1572 {"file-system", 0x170000, 0x240000},
1573 {"partition-table", 0x3b0000, 0x02000},
1574 {"default-mac", 0x3c0000, 0x00020},
1575 {"pin", 0x3c0100, 0x00020},
1576 {"product-info", 0x3c1000, 0x01000},
1577 {"soft-version", 0x3c2000, 0x00100},
1578 {"support-list", 0x3c3000, 0x01000},
1579 {"profile", 0x3c4000, 0x08000},
1580 {"user-config", 0x3d0000, 0x10000},
1581 {"default-config", 0x3e0000, 0x10000},
1582 {"radio", 0x3f0000, 0x10000},
1586 .first_sysupgrade_partition
= "os-image",
1587 .last_sysupgrade_partition
= "file-system"
1590 /** Firmware layout for the TL-WPA8630P v2 (EU)*/
1592 .id
= "TL-WPA8630P-V2.0-EU",
1596 "{product_name:TL-WPA8630P,product_ver:2.0.0,special_id:45550000}\n",
1601 {"factory-uboot", 0x00000, 0x20000},
1602 {"fs-uboot", 0x20000, 0x20000},
1603 {"firmware", 0x40000, 0x5e0000},
1604 {"partition-table", 0x620000, 0x02000},
1605 {"default-mac", 0x630000, 0x00020},
1606 {"pin", 0x630100, 0x00020},
1607 {"device-id", 0x630200, 0x00030},
1608 {"product-info", 0x631100, 0x01000},
1609 {"extra-para", 0x632100, 0x01000},
1610 {"soft-version", 0x640000, 0x01000},
1611 {"support-list", 0x641000, 0x01000},
1612 {"profile", 0x642000, 0x08000},
1613 {"user-config", 0x650000, 0x10000},
1614 {"default-config", 0x660000, 0x10000},
1615 {"default-nvm", 0x670000, 0xc0000},
1616 {"default-pib", 0x730000, 0x40000},
1617 {"radio", 0x7f0000, 0x10000},
1621 .first_sysupgrade_partition
= "os-image",
1622 .last_sysupgrade_partition
= "file-system"
1625 /** Firmware layout for the TL-WPA8630P v2 (INT)*/
1627 .id
= "TL-WPA8630P-V2-INT",
1631 "{product_name:TL-WPA8630P,product_ver:2.0.0,special_id:41550000}\n"
1632 "{product_name:TL-WPA8630P,product_ver:2.0.0,special_id:44450000}\n"
1633 "{product_name:TL-WPA8630P,product_ver:2.1.0,special_id:41550000}\n",
1638 {"factory-uboot", 0x00000, 0x20000},
1639 {"fs-uboot", 0x20000, 0x20000},
1640 {"firmware", 0x40000, 0x5e0000},
1641 {"partition-table", 0x620000, 0x02000},
1642 {"extra-para", 0x632100, 0x01000},
1643 {"soft-version", 0x640000, 0x01000},
1644 {"support-list", 0x641000, 0x01000},
1645 {"profile", 0x642000, 0x08000},
1646 {"user-config", 0x650000, 0x10000},
1647 {"default-config", 0x660000, 0x10000},
1648 {"default-nvm", 0x670000, 0xc0000},
1649 {"default-pib", 0x730000, 0x40000},
1650 {"default-mac", 0x7e0000, 0x00020},
1651 {"pin", 0x7e0100, 0x00020},
1652 {"device-id", 0x7e0200, 0x00030},
1653 {"product-info", 0x7e1100, 0x01000},
1654 {"radio", 0x7f0000, 0x10000},
1658 .first_sysupgrade_partition
= "os-image",
1659 .last_sysupgrade_partition
= "file-system"
1662 /** Firmware layout for the TL-WPA8630P v2.1 (EU)*/
1664 .id
= "TL-WPA8630P-V2.1-EU",
1668 "{product_name:TL-WPA8630P,product_ver:2.1.0,special_id:45550000}\n",
1673 {"factory-uboot", 0x00000, 0x20000},
1674 {"fs-uboot", 0x20000, 0x20000},
1675 {"firmware", 0x40000, 0x5e0000},
1676 {"extra-para", 0x680000, 0x01000},
1677 {"product-info", 0x690000, 0x01000},
1678 {"partition-table", 0x6a0000, 0x02000},
1679 {"soft-version", 0x6b0000, 0x01000},
1680 {"support-list", 0x6b1000, 0x01000},
1681 {"profile", 0x6b2000, 0x08000},
1682 {"user-config", 0x6c0000, 0x10000},
1683 {"default-config", 0x6d0000, 0x10000},
1684 {"default-nvm", 0x6e0000, 0xc0000},
1685 {"default-pib", 0x7a0000, 0x40000},
1686 {"default-mac", 0x7e0000, 0x00020},
1687 {"pin", 0x7e0100, 0x00020},
1688 {"device-id", 0x7e0200, 0x00030},
1689 {"radio", 0x7f0000, 0x10000},
1693 .first_sysupgrade_partition
= "os-image",
1694 .last_sysupgrade_partition
= "file-system"
1697 /** Firmware layout for the TL-WR1043 v5 */
1699 .id
= "TLWR1043NV5",
1703 "{product_name:TL-WR1043N,product_ver:5.0.0,special_id:45550000}\n"
1704 "{product_name:TL-WR1043N,product_ver:5.0.0,special_id:55530000}\n",
1706 .soft_ver
= "soft_ver:1.0.0\n",
1708 {"factory-boot", 0x00000, 0x20000},
1709 {"fs-uboot", 0x20000, 0x20000},
1710 {"firmware", 0x40000, 0xec0000},
1711 {"default-mac", 0xf00000, 0x00200},
1712 {"pin", 0xf00200, 0x00200},
1713 {"device-id", 0xf00400, 0x00100},
1714 {"product-info", 0xf00500, 0x0fb00},
1715 {"soft-version", 0xf10000, 0x01000},
1716 {"extra-para", 0xf11000, 0x01000},
1717 {"support-list", 0xf12000, 0x0a000},
1718 {"profile", 0xf1c000, 0x04000},
1719 {"default-config", 0xf20000, 0x10000},
1720 {"user-config", 0xf30000, 0x40000},
1721 {"qos-db", 0xf70000, 0x40000},
1722 {"certificate", 0xfb0000, 0x10000},
1723 {"partition-table", 0xfc0000, 0x10000},
1724 {"log", 0xfd0000, 0x20000},
1725 {"radio", 0xff0000, 0x10000},
1728 .first_sysupgrade_partition
= "os-image",
1729 .last_sysupgrade_partition
= "file-system"
1732 /** Firmware layout for the TL-WR1043 v4 */
1734 .id
= "TLWR1043NDV4",
1738 "{product_name:TL-WR1043ND,product_ver:4.0.0,special_id:45550000}\n",
1742 /* We're using a dynamic kernel/rootfs split here */
1744 {"fs-uboot", 0x00000, 0x20000},
1745 {"firmware", 0x20000, 0xf30000},
1746 {"default-mac", 0xf50000, 0x00200},
1747 {"pin", 0xf50200, 0x00200},
1748 {"product-info", 0xf50400, 0x0fc00},
1749 {"soft-version", 0xf60000, 0x0b000},
1750 {"support-list", 0xf6b000, 0x04000},
1751 {"profile", 0xf70000, 0x04000},
1752 {"default-config", 0xf74000, 0x0b000},
1753 {"user-config", 0xf80000, 0x40000},
1754 {"partition-table", 0xfc0000, 0x10000},
1755 {"log", 0xfd0000, 0x20000},
1756 {"radio", 0xff0000, 0x10000},
1760 .first_sysupgrade_partition
= "os-image",
1761 .last_sysupgrade_partition
= "file-system"
1764 /** Firmware layout for the TL-WR902AC v1 */
1766 .id
= "TL-WR902AC-V1",
1770 "{product_name:TL-WR902AC,product_ver:1.0.0,special_id:45550000}\n"
1771 "{product_name:TL-WR902AC,product_ver:1.0.0,special_id:55530000}\n",
1776 384KB were moved from file-system to os-image
1777 in comparison to the stock image
1780 {"fs-uboot", 0x00000, 0x20000},
1781 {"firmware", 0x20000, 0x730000},
1782 {"default-mac", 0x750000, 0x00200},
1783 {"pin", 0x750200, 0x00200},
1784 {"product-info", 0x750400, 0x0fc00},
1785 {"soft-version", 0x760000, 0x0b000},
1786 {"support-list", 0x76b000, 0x04000},
1787 {"profile", 0x770000, 0x04000},
1788 {"default-config", 0x774000, 0x0b000},
1789 {"user-config", 0x780000, 0x40000},
1790 {"partition-table", 0x7c0000, 0x10000},
1791 {"log", 0x7d0000, 0x20000},
1792 {"radio", 0x7f0000, 0x10000},
1796 .first_sysupgrade_partition
= "os-image",
1797 .last_sysupgrade_partition
= "file-system",
1800 /** Firmware layout for the TL-WR942N V1 */
1806 "{product_name:TL-WR942N,product_ver:1.0.0,special_id:00000000}\r\n"
1807 "{product_name:TL-WR942N,product_ver:1.0.0,special_id:52550000}\r\n",
1812 {"fs-uboot", 0x00000, 0x20000},
1813 {"firmware", 0x20000, 0xe20000},
1814 {"default-mac", 0xe40000, 0x00200},
1815 {"pin", 0xe40200, 0x00200},
1816 {"product-info", 0xe40400, 0x0fc00},
1817 {"partition-table", 0xe50000, 0x10000},
1818 {"soft-version", 0xe60000, 0x10000},
1819 {"support-list", 0xe70000, 0x10000},
1820 {"profile", 0xe80000, 0x10000},
1821 {"default-config", 0xe90000, 0x10000},
1822 {"user-config", 0xea0000, 0x40000},
1823 {"qos-db", 0xee0000, 0x40000},
1824 {"certificate", 0xf20000, 0x10000},
1825 {"usb-config", 0xfb0000, 0x10000},
1826 {"log", 0xfc0000, 0x20000},
1827 {"radio-bk", 0xfe0000, 0x10000},
1828 {"radio", 0xff0000, 0x10000},
1832 .first_sysupgrade_partition
= "os-image",
1833 .last_sysupgrade_partition
= "file-system",
1836 /** Firmware layout for the RE200 v2 */
1842 "{product_name:RE200,product_ver:2.0.0,special_id:00000000}\n"
1843 "{product_name:RE200,product_ver:2.0.0,special_id:41520000}\n"
1844 "{product_name:RE200,product_ver:2.0.0,special_id:41550000}\n"
1845 "{product_name:RE200,product_ver:2.0.0,special_id:42520000}\n"
1846 "{product_name:RE200,product_ver:2.0.0,special_id:43410000}\n"
1847 "{product_name:RE200,product_ver:2.0.0,special_id:45530000}\n"
1848 "{product_name:RE200,product_ver:2.0.0,special_id:45550000}\n"
1849 "{product_name:RE200,product_ver:2.0.0,special_id:49440000}\n"
1850 "{product_name:RE200,product_ver:2.0.0,special_id:4a500000}\n"
1851 "{product_name:RE200,product_ver:2.0.0,special_id:4b520000}\n"
1852 "{product_name:RE200,product_ver:2.0.0,special_id:52550000}\n"
1853 "{product_name:RE200,product_ver:2.0.0,special_id:54570000}\n"
1854 "{product_name:RE200,product_ver:2.0.0,special_id:55530000}\n",
1859 {"fs-uboot", 0x00000, 0x20000},
1860 {"firmware", 0x20000, 0x7a0000},
1861 {"partition-table", 0x7c0000, 0x02000},
1862 {"default-mac", 0x7c2000, 0x00020},
1863 {"pin", 0x7c2100, 0x00020},
1864 {"product-info", 0x7c3100, 0x01000},
1865 {"soft-version", 0x7c4200, 0x01000},
1866 {"support-list", 0x7c5200, 0x01000},
1867 {"profile", 0x7c6200, 0x08000},
1868 {"config-info", 0x7ce200, 0x00400},
1869 {"user-config", 0x7d0000, 0x10000},
1870 {"default-config", 0x7e0000, 0x10000},
1871 {"radio", 0x7f0000, 0x10000},
1875 .first_sysupgrade_partition
= "os-image",
1876 .last_sysupgrade_partition
= "file-system"
1879 /** Firmware layout for the RE200 v3 */
1885 "{product_name:RE200,product_ver:3.0.0,special_id:00000000}\n"
1886 "{product_name:RE200,product_ver:3.0.0,special_id:41520000}\n"
1887 "{product_name:RE200,product_ver:3.0.0,special_id:41550000}\n"
1888 "{product_name:RE200,product_ver:3.0.0,special_id:42520000}\n"
1889 "{product_name:RE200,product_ver:3.0.0,special_id:43410000}\n"
1890 "{product_name:RE200,product_ver:3.0.0,special_id:45470000}\n"
1891 "{product_name:RE200,product_ver:3.0.0,special_id:45530000}\n"
1892 "{product_name:RE200,product_ver:3.0.0,special_id:45550000}\n"
1893 "{product_name:RE200,product_ver:3.0.0,special_id:49440000}\n"
1894 "{product_name:RE200,product_ver:3.0.0,special_id:4A500000}\n"
1895 "{product_name:RE200,product_ver:3.0.0,special_id:4B520000}\n"
1896 "{product_name:RE200,product_ver:3.0.0,special_id:52550000}\n"
1897 "{product_name:RE200,product_ver:3.0.0,special_id:54570000}\n"
1898 "{product_name:RE200,product_ver:3.0.0,special_id:55530000}\n",
1903 {"fs-uboot", 0x00000, 0x20000},
1904 {"firmware", 0x20000, 0x7a0000},
1905 {"partition-table", 0x7c0000, 0x02000},
1906 {"default-mac", 0x7c2000, 0x00020},
1907 {"pin", 0x7c2100, 0x00020},
1908 {"product-info", 0x7c3100, 0x01000},
1909 {"soft-version", 0x7c4200, 0x01000},
1910 {"support-list", 0x7c5200, 0x01000},
1911 {"profile", 0x7c6200, 0x08000},
1912 {"config-info", 0x7ce200, 0x00400},
1913 {"user-config", 0x7d0000, 0x10000},
1914 {"default-config", 0x7e0000, 0x10000},
1915 {"radio", 0x7f0000, 0x10000},
1919 .first_sysupgrade_partition
= "os-image",
1920 .last_sysupgrade_partition
= "file-system"
1923 /** Firmware layout for the RE200 v4 */
1929 "{product_name:RE200,product_ver:4.0.0,special_id:00000000}\n"
1930 "{product_name:RE200,product_ver:4.0.0,special_id:45550000}\n"
1931 "{product_name:RE200,product_ver:4.0.0,special_id:4A500000}\n"
1932 "{product_name:RE200,product_ver:4.0.0,special_id:4B520000}\n"
1933 "{product_name:RE200,product_ver:4.0.0,special_id:43410000}\n"
1934 "{product_name:RE200,product_ver:4.0.0,special_id:41550000}\n"
1935 "{product_name:RE200,product_ver:4.0.0,special_id:42520000}\n"
1936 "{product_name:RE200,product_ver:4.0.0,special_id:55530000}\n"
1937 "{product_name:RE200,product_ver:4.0.0,special_id:41520000}\n"
1938 "{product_name:RE200,product_ver:4.0.0,special_id:52550000}\n"
1939 "{product_name:RE200,product_ver:4.0.0,special_id:54570000}\n"
1940 "{product_name:RE200,product_ver:4.0.0,special_id:45530000}\n"
1941 "{product_name:RE200,product_ver:4.0.0,special_id:49440000}\n"
1942 "{product_name:RE200,product_ver:4.0.0,special_id:45470000}\n",
1944 .soft_ver
= "soft_ver:1.1.0\n",
1947 {"fs-uboot", 0x00000, 0x20000},
1948 {"firmware", 0x20000, 0x7a0000},
1949 {"partition-table", 0x7c0000, 0x02000},
1950 {"default-mac", 0x7c2000, 0x00020},
1951 {"pin", 0x7c2100, 0x00020},
1952 {"product-info", 0x7c3100, 0x01000},
1953 {"soft-version", 0x7c4200, 0x01000},
1954 {"support-list", 0x7c5200, 0x01000},
1955 {"profile", 0x7c6200, 0x08000},
1956 {"config-info", 0x7ce200, 0x00400},
1957 {"user-config", 0x7d0000, 0x10000},
1958 {"default-config", 0x7e0000, 0x10000},
1959 {"radio", 0x7f0000, 0x10000},
1963 .first_sysupgrade_partition
= "os-image",
1964 .last_sysupgrade_partition
= "file-system"
1967 /** Firmware layout for the RE220 v2 */
1973 "{product_name:RE220,product_ver:2.0.0,special_id:00000000}\n"
1974 "{product_name:RE220,product_ver:2.0.0,special_id:41520000}\n"
1975 "{product_name:RE220,product_ver:2.0.0,special_id:41550000}\n"
1976 "{product_name:RE220,product_ver:2.0.0,special_id:42520000}\n"
1977 "{product_name:RE220,product_ver:2.0.0,special_id:43410000}\n"
1978 "{product_name:RE220,product_ver:2.0.0,special_id:45530000}\n"
1979 "{product_name:RE220,product_ver:2.0.0,special_id:45550000}\n"
1980 "{product_name:RE220,product_ver:2.0.0,special_id:49440000}\n"
1981 "{product_name:RE220,product_ver:2.0.0,special_id:4a500000}\n"
1982 "{product_name:RE220,product_ver:2.0.0,special_id:4b520000}\n"
1983 "{product_name:RE220,product_ver:2.0.0,special_id:52550000}\n"
1984 "{product_name:RE220,product_ver:2.0.0,special_id:54570000}\n"
1985 "{product_name:RE220,product_ver:2.0.0,special_id:55530000}\n",
1990 {"fs-uboot", 0x00000, 0x20000},
1991 {"firmware", 0x20000, 0x7a0000},
1992 {"partition-table", 0x7c0000, 0x02000},
1993 {"default-mac", 0x7c2000, 0x00020},
1994 {"pin", 0x7c2100, 0x00020},
1995 {"product-info", 0x7c3100, 0x01000},
1996 {"soft-version", 0x7c4200, 0x01000},
1997 {"support-list", 0x7c5200, 0x01000},
1998 {"profile", 0x7c6200, 0x08000},
1999 {"config-info", 0x7ce200, 0x00400},
2000 {"user-config", 0x7d0000, 0x10000},
2001 {"default-config", 0x7e0000, 0x10000},
2002 {"radio", 0x7f0000, 0x10000},
2006 .first_sysupgrade_partition
= "os-image",
2007 .last_sysupgrade_partition
= "file-system"
2010 /** Firmware layout for the RE305 v1 */
2016 "{product_name:RE305,product_ver:1.0.0,special_id:45550000}\n"
2017 "{product_name:RE305,product_ver:1.0.0,special_id:55530000}\n"
2018 "{product_name:RE305,product_ver:1.0.0,special_id:4a500000}\n"
2019 "{product_name:RE305,product_ver:1.0.0,special_id:42520000}\n"
2020 "{product_name:RE305,product_ver:1.0.0,special_id:4b520000}\n"
2021 "{product_name:RE305,product_ver:1.0.0,special_id:41550000}\n"
2022 "{product_name:RE305,product_ver:1.0.0,special_id:43410000}\n",
2027 {"fs-uboot", 0x00000, 0x20000},
2028 {"firmware", 0x20000, 0x5e0000},
2029 {"partition-table", 0x600000, 0x02000},
2030 {"default-mac", 0x610000, 0x00020},
2031 {"pin", 0x610100, 0x00020},
2032 {"product-info", 0x611100, 0x01000},
2033 {"soft-version", 0x620000, 0x01000},
2034 {"support-list", 0x621000, 0x01000},
2035 {"profile", 0x622000, 0x08000},
2036 {"user-config", 0x630000, 0x10000},
2037 {"default-config", 0x640000, 0x10000},
2038 {"radio", 0x7f0000, 0x10000},
2042 .first_sysupgrade_partition
= "os-image",
2043 .last_sysupgrade_partition
= "file-system"
2046 /** Firmware layout for the RE350 v1 */
2052 "{product_name:RE350,product_ver:1.0.0,special_id:45550000}\n"
2053 "{product_name:RE350,product_ver:1.0.0,special_id:00000000}\n"
2054 "{product_name:RE350,product_ver:1.0.0,special_id:41550000}\n"
2055 "{product_name:RE350,product_ver:1.0.0,special_id:55530000}\n"
2056 "{product_name:RE350,product_ver:1.0.0,special_id:43410000}\n"
2057 "{product_name:RE350,product_ver:1.0.0,special_id:4b520000}\n"
2058 "{product_name:RE350,product_ver:1.0.0,special_id:4a500000}\n",
2062 /** We're using a dynamic kernel/rootfs split here */
2064 {"fs-uboot", 0x00000, 0x20000},
2065 {"firmware", 0x20000, 0x5e0000},
2066 {"partition-table", 0x600000, 0x02000},
2067 {"default-mac", 0x610000, 0x00020},
2068 {"pin", 0x610100, 0x00020},
2069 {"product-info", 0x611100, 0x01000},
2070 {"soft-version", 0x620000, 0x01000},
2071 {"support-list", 0x621000, 0x01000},
2072 {"profile", 0x622000, 0x08000},
2073 {"user-config", 0x630000, 0x10000},
2074 {"default-config", 0x640000, 0x10000},
2075 {"radio", 0x7f0000, 0x10000},
2079 .first_sysupgrade_partition
= "os-image",
2080 .last_sysupgrade_partition
= "file-system"
2083 /** Firmware layout for the RE350K v1 */
2089 "{product_name:RE350K,product_ver:1.0.0,special_id:00000000,product_region:US}\n",
2093 /** We're using a dynamic kernel/rootfs split here */
2095 {"fs-uboot", 0x00000, 0x20000},
2096 {"firmware", 0x20000, 0xd70000},
2097 {"partition-table", 0xd90000, 0x02000},
2098 {"default-mac", 0xda0000, 0x00020},
2099 {"pin", 0xda0100, 0x00020},
2100 {"product-info", 0xda1100, 0x01000},
2101 {"soft-version", 0xdb0000, 0x01000},
2102 {"support-list", 0xdb1000, 0x01000},
2103 {"profile", 0xdb2000, 0x08000},
2104 {"user-config", 0xdc0000, 0x10000},
2105 {"default-config", 0xdd0000, 0x10000},
2106 {"device-id", 0xde0000, 0x00108},
2107 {"radio", 0xff0000, 0x10000},
2111 .first_sysupgrade_partition
= "os-image",
2112 .last_sysupgrade_partition
= "file-system"
2115 /** Firmware layout for the RE355 */
2121 "{product_name:RE355,product_ver:1.0.0,special_id:00000000}\r\n"
2122 "{product_name:RE355,product_ver:1.0.0,special_id:55530000}\r\n"
2123 "{product_name:RE355,product_ver:1.0.0,special_id:45550000}\r\n"
2124 "{product_name:RE355,product_ver:1.0.0,special_id:4A500000}\r\n"
2125 "{product_name:RE355,product_ver:1.0.0,special_id:43410000}\r\n"
2126 "{product_name:RE355,product_ver:1.0.0,special_id:41550000}\r\n"
2127 "{product_name:RE355,product_ver:1.0.0,special_id:4B520000}\r\n"
2128 "{product_name:RE355,product_ver:1.0.0,special_id:55534100}\r\n",
2132 /* We're using a dynamic kernel/rootfs split here */
2134 {"fs-uboot", 0x00000, 0x20000},
2135 {"firmware", 0x20000, 0x5e0000},
2136 {"partition-table", 0x600000, 0x02000},
2137 {"default-mac", 0x610000, 0x00020},
2138 {"pin", 0x610100, 0x00020},
2139 {"product-info", 0x611100, 0x01000},
2140 {"soft-version", 0x620000, 0x01000},
2141 {"support-list", 0x621000, 0x01000},
2142 {"profile", 0x622000, 0x08000},
2143 {"user-config", 0x630000, 0x10000},
2144 {"default-config", 0x640000, 0x10000},
2145 {"radio", 0x7f0000, 0x10000},
2149 .first_sysupgrade_partition
= "os-image",
2150 .last_sysupgrade_partition
= "file-system"
2153 /** Firmware layout for the RE450 */
2159 "{product_name:RE450,product_ver:1.0.0,special_id:00000000}\r\n"
2160 "{product_name:RE450,product_ver:1.0.0,special_id:55530000}\r\n"
2161 "{product_name:RE450,product_ver:1.0.0,special_id:45550000}\r\n"
2162 "{product_name:RE450,product_ver:1.0.0,special_id:4A500000}\r\n"
2163 "{product_name:RE450,product_ver:1.0.0,special_id:43410000}\r\n"
2164 "{product_name:RE450,product_ver:1.0.0,special_id:41550000}\r\n"
2165 "{product_name:RE450,product_ver:1.0.0,special_id:4B520000}\r\n"
2166 "{product_name:RE450,product_ver:1.0.0,special_id:55534100}\r\n",
2170 /** We're using a dynamic kernel/rootfs split here */
2172 {"fs-uboot", 0x00000, 0x20000},
2173 {"firmware", 0x20000, 0x5e0000},
2174 {"partition-table", 0x600000, 0x02000},
2175 {"default-mac", 0x610000, 0x00020},
2176 {"pin", 0x610100, 0x00020},
2177 {"product-info", 0x611100, 0x01000},
2178 {"soft-version", 0x620000, 0x01000},
2179 {"support-list", 0x621000, 0x01000},
2180 {"profile", 0x622000, 0x08000},
2181 {"user-config", 0x630000, 0x10000},
2182 {"default-config", 0x640000, 0x10000},
2183 {"radio", 0x7f0000, 0x10000},
2187 .first_sysupgrade_partition
= "os-image",
2188 .last_sysupgrade_partition
= "file-system"
2191 /** Firmware layout for the RE450 v2 */
2197 "{product_name:RE450,product_ver:2.0.0,special_id:00000000}\r\n"
2198 "{product_name:RE450,product_ver:2.0.0,special_id:55530000}\r\n"
2199 "{product_name:RE450,product_ver:2.0.0,special_id:45550000}\r\n"
2200 "{product_name:RE450,product_ver:2.0.0,special_id:4A500000}\r\n"
2201 "{product_name:RE450,product_ver:2.0.0,special_id:43410000}\r\n"
2202 "{product_name:RE450,product_ver:2.0.0,special_id:41550000}\r\n"
2203 "{product_name:RE450,product_ver:2.0.0,special_id:41530000}\r\n"
2204 "{product_name:RE450,product_ver:2.0.0,special_id:4B520000}\r\n"
2205 "{product_name:RE450,product_ver:2.0.0,special_id:42520000}\r\n",
2209 /* We're using a dynamic kernel/rootfs split here */
2211 {"fs-uboot", 0x00000, 0x20000},
2212 {"firmware", 0x20000, 0x5e0000},
2213 {"partition-table", 0x600000, 0x02000},
2214 {"default-mac", 0x610000, 0x00020},
2215 {"pin", 0x610100, 0x00020},
2216 {"product-info", 0x611100, 0x01000},
2217 {"soft-version", 0x620000, 0x01000},
2218 {"support-list", 0x621000, 0x01000},
2219 {"profile", 0x622000, 0x08000},
2220 {"user-config", 0x630000, 0x10000},
2221 {"default-config", 0x640000, 0x10000},
2222 {"radio", 0x7f0000, 0x10000},
2226 .first_sysupgrade_partition
= "os-image",
2227 .last_sysupgrade_partition
= "file-system"
2230 /** Firmware layout for the RE450 v3 */
2236 "{product_name:RE450,product_ver:3.0.0,special_id:00000000}\r\n"
2237 "{product_name:RE450,product_ver:3.0.0,special_id:55530000}\r\n"
2238 "{product_name:RE450,product_ver:3.0.0,special_id:45550000}\r\n"
2239 "{product_name:RE450,product_ver:3.0.0,special_id:4A500000}\r\n"
2240 "{product_name:RE450,product_ver:3.0.0,special_id:43410000}\r\n"
2241 "{product_name:RE450,product_ver:3.0.0,special_id:41550000}\r\n"
2242 "{product_name:RE450,product_ver:3.0.0,special_id:41530000}\r\n"
2243 "{product_name:RE450,product_ver:3.0.0,special_id:4B520000}\r\n"
2244 "{product_name:RE450,product_ver:3.0.0,special_id:42520000}\r\n",
2248 /* We're using a dynamic kernel/rootfs split here */
2250 {"fs-uboot", 0x00000, 0x20000},
2251 {"default-mac", 0x20000, 0x00020},
2252 {"pin", 0x20020, 0x00020},
2253 {"product-info", 0x21000, 0x01000},
2254 {"partition-table", 0x22000, 0x02000},
2255 {"soft-version", 0x24000, 0x01000},
2256 {"support-list", 0x25000, 0x01000},
2257 {"profile", 0x26000, 0x08000},
2258 {"user-config", 0x2e000, 0x10000},
2259 {"default-config", 0x3e000, 0x10000},
2260 {"config-info", 0x4e000, 0x00400},
2261 {"firmware", 0x50000, 0x7a0000},
2262 {"radio", 0x7f0000, 0x10000},
2266 .first_sysupgrade_partition
= "os-image",
2267 .last_sysupgrade_partition
= "file-system"
2270 /** Firmware layout for the RE500 */
2276 "{product_name:RE500,product_ver:1.0.0,special_id:00000000}\r\n"
2277 "{product_name:RE500,product_ver:1.0.0,special_id:55530000}\r\n"
2278 "{product_name:RE500,product_ver:1.0.0,special_id:45550000}\r\n"
2279 "{product_name:RE500,product_ver:1.0.0,special_id:4A500000}\r\n"
2280 "{product_name:RE500,product_ver:1.0.0,special_id:43410000}\r\n"
2281 "{product_name:RE500,product_ver:1.0.0,special_id:41550000}\r\n"
2282 "{product_name:RE500,product_ver:1.0.0,special_id:41530000}\r\n",
2286 /* We're using a dynamic kernel/rootfs split here */
2288 {"fs-uboot", 0x00000, 0x20000},
2289 {"firmware", 0x20000, 0xde0000},
2290 {"partition-table", 0xe00000, 0x02000},
2291 {"default-mac", 0xe10000, 0x00020},
2292 {"pin", 0xe10100, 0x00020},
2293 {"product-info", 0xe11100, 0x01000},
2294 {"soft-version", 0xe20000, 0x01000},
2295 {"support-list", 0xe21000, 0x01000},
2296 {"profile", 0xe22000, 0x08000},
2297 {"user-config", 0xe30000, 0x10000},
2298 {"default-config", 0xe40000, 0x10000},
2299 {"radio", 0xff0000, 0x10000},
2303 .first_sysupgrade_partition
= "os-image",
2304 .last_sysupgrade_partition
= "file-system"
2307 /** Firmware layout for the RE650 */
2313 "{product_name:RE650,product_ver:1.0.0,special_id:00000000}\r\n"
2314 "{product_name:RE650,product_ver:1.0.0,special_id:55530000}\r\n"
2315 "{product_name:RE650,product_ver:1.0.0,special_id:45550000}\r\n"
2316 "{product_name:RE650,product_ver:1.0.0,special_id:4A500000}\r\n"
2317 "{product_name:RE650,product_ver:1.0.0,special_id:43410000}\r\n"
2318 "{product_name:RE650,product_ver:1.0.0,special_id:41550000}\r\n"
2319 "{product_name:RE650,product_ver:1.0.0,special_id:41530000}\r\n",
2323 /* We're using a dynamic kernel/rootfs split here */
2325 {"fs-uboot", 0x00000, 0x20000},
2326 {"firmware", 0x20000, 0xde0000},
2327 {"partition-table", 0xe00000, 0x02000},
2328 {"default-mac", 0xe10000, 0x00020},
2329 {"pin", 0xe10100, 0x00020},
2330 {"product-info", 0xe11100, 0x01000},
2331 {"soft-version", 0xe20000, 0x01000},
2332 {"support-list", 0xe21000, 0x01000},
2333 {"profile", 0xe22000, 0x08000},
2334 {"user-config", 0xe30000, 0x10000},
2335 {"default-config", 0xe40000, 0x10000},
2336 {"radio", 0xff0000, 0x10000},
2340 .first_sysupgrade_partition
= "os-image",
2341 .last_sysupgrade_partition
= "file-system"
2347 #define error(_ret, _errno, _str, ...) \
2349 fprintf(stderr, _str ": %s\n", ## __VA_ARGS__, \
2350 strerror(_errno)); \
2356 /** Stores a uint32 as big endian */
2357 static inline void put32(uint8_t *buf
, uint32_t val
) {
2364 static inline bool meta_partition_should_pad(enum partition_trail_value pv
)
2366 return (pv
>= 0) && (pv
<= PART_TRAIL_MAX
);
2369 /** Allocate a padded meta partition with a correctly initialised header
2370 * If the `data` pointer is NULL, then the required space is only allocated,
2371 * otherwise `data_len` bytes will be copied from `data` into the partition
2373 static struct image_partition_entry
init_meta_partition_entry(
2374 const char *name
, const void *data
, uint32_t data_len
,
2375 enum partition_trail_value pad_value
)
2377 uint32_t total_len
= sizeof(struct meta_header
) + data_len
;
2378 if (meta_partition_should_pad(pad_value
))
2381 struct image_partition_entry entry
= {
2384 .data
= malloc(total_len
)
2387 error(1, errno
, "failed to allocate meta partition entry");
2389 struct meta_header
*header
= (struct meta_header
*)entry
.data
;
2390 header
->length
= htonl(data_len
);
2394 memcpy(entry
.data
+sizeof(*header
), data
, data_len
);
2396 if (meta_partition_should_pad(pad_value
))
2397 entry
.data
[total_len
- 1] = (uint8_t) pad_value
;
2402 /** Allocates a new image partition */
2403 static struct image_partition_entry
alloc_image_partition(const char *name
, size_t len
) {
2404 struct image_partition_entry entry
= {name
, len
, malloc(len
)};
2406 error(1, errno
, "malloc");
2411 /** Frees an image partition */
2412 static void free_image_partition(struct image_partition_entry entry
) {
2416 static time_t source_date_epoch
= -1;
2417 static void set_source_date_epoch() {
2418 char *env
= getenv("SOURCE_DATE_EPOCH");
2422 source_date_epoch
= strtoull(env
, &endptr
, 10);
2423 if (errno
|| (endptr
&& *endptr
!= '\0')) {
2424 fprintf(stderr
, "Invalid SOURCE_DATE_EPOCH");
2430 /** Generates the partition-table partition */
2431 static struct image_partition_entry
make_partition_table(const struct flash_partition_entry
*p
) {
2432 struct image_partition_entry entry
= alloc_image_partition("partition-table", 0x800);
2434 char *s
= (char *)entry
.data
, *end
= (char *)(s
+entry
.size
);
2442 for (i
= 0; p
[i
].name
; i
++) {
2444 size_t w
= snprintf(s
, len
, "partition %s base 0x%05x size 0x%05x\n", p
[i
].name
, p
[i
].base
, p
[i
].size
);
2447 error(1, 0, "flash partition table overflow?");
2454 memset(s
, 0xff, end
-s
);
2460 /** Generates a binary-coded decimal representation of an integer in the range [0, 99] */
2461 static inline uint8_t bcd(uint8_t v
) {
2462 return 0x10 * (v
/10) + v
%10;
2466 /** Generates the soft-version partition */
2467 static struct image_partition_entry
make_soft_version(
2468 const struct device_info
*info
, uint32_t rev
)
2470 /** If an info string is provided, use this instead of
2471 * the structured data, and include the null-termination */
2472 if (info
->soft_ver
) {
2473 uint32_t len
= strlen(info
->soft_ver
) + 1;
2474 return init_meta_partition_entry("soft-version",
2475 info
->soft_ver
, len
, info
->part_trail
);
2480 if (source_date_epoch
!= -1)
2481 t
= source_date_epoch
;
2482 else if (time(&t
) == (time_t)(-1))
2483 error(1, errno
, "time");
2485 struct tm
*tm
= gmtime(&t
);
2487 struct soft_version s
= {
2494 .year_hi
= bcd((1900+tm
->tm_year
)/100),
2495 .year_lo
= bcd(tm
->tm_year
%100),
2496 .month
= bcd(tm
->tm_mon
+1),
2497 .day
= bcd(tm
->tm_mday
),
2499 .compat_level
= htonl(info
->soft_ver_compat_level
)
2502 if (info
->soft_ver_compat_level
== 0)
2503 return init_meta_partition_entry("soft-version", &s
,
2504 (uint8_t *)(&s
.compat_level
) - (uint8_t *)(&s
),
2507 return init_meta_partition_entry("soft-version", &s
,
2508 sizeof(s
), info
->part_trail
);
2511 /** Generates the support-list partition */
2512 static struct image_partition_entry
make_support_list(
2513 const struct device_info
*info
)
2515 uint32_t len
= strlen(info
->support_list
);
2516 return init_meta_partition_entry("support-list", info
->support_list
,
2517 len
, info
->part_trail
);
2520 /** Partition with extra-para data */
2521 static struct image_partition_entry
make_extra_para(
2522 const struct device_info
*info
, const uint8_t *extra_para
, size_t len
)
2524 return init_meta_partition_entry("extra-para", extra_para
, len
,
2528 /** Creates a new image partition with an arbitrary name from a file */
2529 static struct image_partition_entry
read_file(const char *part_name
, const char *filename
, bool add_jffs2_eof
, struct flash_partition_entry
*file_system_partition
) {
2530 struct stat statbuf
;
2532 if (stat(filename
, &statbuf
) < 0)
2533 error(1, errno
, "unable to stat file `%s'", filename
);
2535 size_t len
= statbuf
.st_size
;
2537 if (add_jffs2_eof
) {
2538 if (file_system_partition
)
2539 len
= ALIGN(len
+ file_system_partition
->base
, 0x10000) + sizeof(jffs2_eof_mark
) - file_system_partition
->base
;
2541 len
= ALIGN(len
, 0x10000) + sizeof(jffs2_eof_mark
);
2544 struct image_partition_entry entry
= alloc_image_partition(part_name
, len
);
2546 FILE *file
= fopen(filename
, "rb");
2548 error(1, errno
, "unable to open file `%s'", filename
);
2550 if (fread(entry
.data
, statbuf
.st_size
, 1, file
) != 1)
2551 error(1, errno
, "unable to read file `%s'", filename
);
2553 if (add_jffs2_eof
) {
2554 uint8_t *eof
= entry
.data
+ statbuf
.st_size
, *end
= entry
.data
+entry
.size
;
2556 memset(eof
, 0xff, end
- eof
- sizeof(jffs2_eof_mark
));
2557 memcpy(end
- sizeof(jffs2_eof_mark
), jffs2_eof_mark
, sizeof(jffs2_eof_mark
));
2566 Copies a list of image partitions into an image buffer and generates the image partition table while doing so
2568 Example image partition table:
2570 fwup-ptn partition-table base 0x00800 size 0x00800
2571 fwup-ptn os-image base 0x01000 size 0x113b45
2572 fwup-ptn file-system base 0x114b45 size 0x1d0004
2573 fwup-ptn support-list base 0x2e4b49 size 0x000d1
2575 Each line of the partition table is terminated with the bytes 09 0d 0a ("\t\r\n"),
2576 the end of the partition table is marked with a zero byte.
2578 The firmware image must contain at least the partition-table and support-list partitions
2579 to be accepted. There aren't any alignment constraints for the image partitions.
2581 The partition-table partition contains the actual flash layout; partitions
2582 from the image partition table are mapped to the corresponding flash partitions during
2583 the firmware upgrade. The support-list partition contains a list of devices supported by
2586 The base offsets in the firmware partition table are relative to the end
2587 of the vendor information block, so the partition-table partition will
2588 actually start at offset 0x1814 of the image.
2590 I think partition-table must be the first partition in the firmware image.
2592 static void put_partitions(uint8_t *buffer
, const struct flash_partition_entry
*flash_parts
, const struct image_partition_entry
*parts
) {
2594 char *image_pt
= (char *)buffer
, *end
= image_pt
+ 0x800;
2596 size_t base
= 0x800;
2597 for (i
= 0; parts
[i
].name
; i
++) {
2598 for (j
= 0; flash_parts
[j
].name
; j
++) {
2599 if (!strcmp(flash_parts
[j
].name
, parts
[i
].name
)) {
2600 if (parts
[i
].size
> flash_parts
[j
].size
)
2601 error(1, 0, "%s partition too big (more than %u bytes)", flash_parts
[j
].name
, (unsigned)flash_parts
[j
].size
);
2606 assert(flash_parts
[j
].name
);
2608 memcpy(buffer
+ base
, parts
[i
].data
, parts
[i
].size
);
2610 size_t len
= end
-image_pt
;
2611 size_t w
= snprintf(image_pt
, len
, "fwup-ptn %s base 0x%05x size 0x%05x\t\r\n", parts
[i
].name
, (unsigned)base
, (unsigned)parts
[i
].size
);
2614 error(1, 0, "image partition table overflow?");
2618 base
+= parts
[i
].size
;
2622 /** Generates and writes the image MD5 checksum */
2623 static void put_md5(uint8_t *md5
, uint8_t *buffer
, unsigned int len
) {
2627 MD5_Update(&ctx
, md5_salt
, (unsigned int)sizeof(md5_salt
));
2628 MD5_Update(&ctx
, buffer
, len
);
2629 MD5_Final(md5
, &ctx
);
2634 Generates the firmware image in factory format
2640 0000-0003 Image size (4 bytes, big endian)
2641 0004-0013 MD5 hash (hash of a 16 byte salt and the image data starting with byte 0x14)
2642 0014-0017 Vendor information length (without padding) (4 bytes, big endian)
2643 0018-1013 Vendor information (4092 bytes, padded with 0xff; there seem to be older
2644 (VxWorks-based) TP-LINK devices which use a smaller vendor information block)
2645 1014-1813 Image partition table (2048 bytes, padded with 0xff)
2646 1814-xxxx Firmware partitions
2648 static void * generate_factory_image(struct device_info
*info
, const struct image_partition_entry
*parts
, size_t *len
) {
2652 for (i
= 0; parts
[i
].name
; i
++)
2653 *len
+= parts
[i
].size
;
2655 uint8_t *image
= malloc(*len
);
2657 error(1, errno
, "malloc");
2659 memset(image
, 0xff, *len
);
2663 size_t vendor_len
= strlen(info
->vendor
);
2664 put32(image
+0x14, vendor_len
);
2665 memcpy(image
+0x18, info
->vendor
, vendor_len
);
2668 put_partitions(image
+ 0x1014, info
->partitions
, parts
);
2669 put_md5(image
+0x04, image
+0x14, *len
-0x14);
2675 Generates the firmware image in sysupgrade format
2677 This makes some assumptions about the provided flash and image partition tables and
2678 should be generalized when TP-LINK starts building its safeloader into hardware with
2679 different flash layouts.
2681 static void * generate_sysupgrade_image(struct device_info
*info
, const struct image_partition_entry
*image_parts
, size_t *len
) {
2683 size_t flash_first_partition_index
= 0;
2684 size_t flash_last_partition_index
= 0;
2685 const struct flash_partition_entry
*flash_first_partition
= NULL
;
2686 const struct flash_partition_entry
*flash_last_partition
= NULL
;
2687 const struct image_partition_entry
*image_last_partition
= NULL
;
2689 /** Find first and last partitions */
2690 for (i
= 0; info
->partitions
[i
].name
; i
++) {
2691 if (!strcmp(info
->partitions
[i
].name
, info
->first_sysupgrade_partition
)) {
2692 flash_first_partition
= &info
->partitions
[i
];
2693 flash_first_partition_index
= i
;
2694 } else if (!strcmp(info
->partitions
[i
].name
, info
->last_sysupgrade_partition
)) {
2695 flash_last_partition
= &info
->partitions
[i
];
2696 flash_last_partition_index
= i
;
2700 assert(flash_first_partition
&& flash_last_partition
);
2701 assert(flash_first_partition_index
< flash_last_partition_index
);
2703 /** Find last partition from image to calculate needed size */
2704 for (i
= 0; image_parts
[i
].name
; i
++) {
2705 if (!strcmp(image_parts
[i
].name
, info
->last_sysupgrade_partition
)) {
2706 image_last_partition
= &image_parts
[i
];
2711 assert(image_last_partition
);
2713 *len
= flash_last_partition
->base
- flash_first_partition
->base
+ image_last_partition
->size
;
2715 uint8_t *image
= malloc(*len
);
2717 error(1, errno
, "malloc");
2719 memset(image
, 0xff, *len
);
2721 for (i
= flash_first_partition_index
; i
<= flash_last_partition_index
; i
++) {
2722 for (j
= 0; image_parts
[j
].name
; j
++) {
2723 if (!strcmp(info
->partitions
[i
].name
, image_parts
[j
].name
)) {
2724 if (image_parts
[j
].size
> info
->partitions
[i
].size
)
2725 error(1, 0, "%s partition too big (more than %u bytes)", info
->partitions
[i
].name
, (unsigned)info
->partitions
[i
].size
);
2726 memcpy(image
+ info
->partitions
[i
].base
- flash_first_partition
->base
, image_parts
[j
].data
, image_parts
[j
].size
);
2730 assert(image_parts
[j
].name
);
2737 /** Generates an image according to a given layout and writes it to a file */
2738 static void build_image(const char *output
,
2739 const char *kernel_image
,
2740 const char *rootfs_image
,
2744 struct device_info
*info
) {
2748 struct image_partition_entry parts
[7] = {};
2750 struct flash_partition_entry
*firmware_partition
= NULL
;
2751 struct flash_partition_entry
*os_image_partition
= NULL
;
2752 struct flash_partition_entry
*file_system_partition
= NULL
;
2753 size_t firmware_partition_index
= 0;
2755 for (i
= 0; info
->partitions
[i
].name
; i
++) {
2756 if (!strcmp(info
->partitions
[i
].name
, "firmware"))
2758 firmware_partition
= &info
->partitions
[i
];
2759 firmware_partition_index
= i
;
2763 if (firmware_partition
)
2765 os_image_partition
= &info
->partitions
[firmware_partition_index
];
2766 file_system_partition
= &info
->partitions
[firmware_partition_index
+ 1];
2769 if (stat(kernel_image
, &kernel
) < 0)
2770 error(1, errno
, "unable to stat file `%s'", kernel_image
);
2772 if (kernel
.st_size
> firmware_partition
->size
)
2773 error(1, 0, "kernel overflowed firmware partition\n");
2775 for (i
= MAX_PARTITIONS
-1; i
>= firmware_partition_index
+ 1; i
--)
2776 info
->partitions
[i
+1] = info
->partitions
[i
];
2778 file_system_partition
->name
= "file-system";
2779 file_system_partition
->base
= firmware_partition
->base
+ kernel
.st_size
;
2781 /* Align partition start to erase blocks for factory images only */
2783 file_system_partition
->base
= ALIGN(firmware_partition
->base
+ kernel
.st_size
, 0x10000);
2785 file_system_partition
->size
= firmware_partition
->size
- file_system_partition
->base
;
2787 os_image_partition
->name
= "os-image";
2788 os_image_partition
->size
= kernel
.st_size
;
2791 parts
[0] = make_partition_table(info
->partitions
);
2792 parts
[1] = make_soft_version(info
, rev
);
2793 parts
[2] = make_support_list(info
);
2794 parts
[3] = read_file("os-image", kernel_image
, false, NULL
);
2795 parts
[4] = read_file("file-system", rootfs_image
, add_jffs2_eof
, file_system_partition
);
2797 /* Some devices need the extra-para partition to accept the firmware */
2798 if (strcasecmp(info
->id
, "ARCHER-A7-V5") == 0 ||
2799 strcasecmp(info
->id
, "ARCHER-C2-V3") == 0 ||
2800 strcasecmp(info
->id
, "ARCHER-C7-V4") == 0 ||
2801 strcasecmp(info
->id
, "ARCHER-C7-V5") == 0 ||
2802 strcasecmp(info
->id
, "ARCHER-C25-V1") == 0 ||
2803 strcasecmp(info
->id
, "ARCHER-C59-V2") == 0 ||
2804 strcasecmp(info
->id
, "ARCHER-C60-V2") == 0 ||
2805 strcasecmp(info
->id
, "ARCHER-C60-V3") == 0 ||
2806 strcasecmp(info
->id
, "TLWR1043NV5") == 0) {
2807 const uint8_t extra_para
[2] = {0x01, 0x00};
2808 parts
[5] = make_extra_para(info
, extra_para
,
2809 sizeof(extra_para
));
2810 } else if (strcasecmp(info
->id
, "ARCHER-C6-V2") == 0) {
2811 const uint8_t extra_para
[2] = {0x00, 0x01};
2812 parts
[5] = make_extra_para(info
, extra_para
,
2813 sizeof(extra_para
));
2814 } else if (strcasecmp(info
->id
, "ARCHER-C6-V2-US") == 0 ||
2815 strcasecmp(info
->id
, "EAP245-V3") == 0) {
2816 const uint8_t extra_para
[2] = {0x01, 0x01};
2817 parts
[5] = make_extra_para(info
, extra_para
,
2818 sizeof(extra_para
));
2824 image
= generate_sysupgrade_image(info
, parts
, &len
);
2826 image
= generate_factory_image(info
, parts
, &len
);
2828 FILE *file
= fopen(output
, "wb");
2830 error(1, errno
, "unable to open output file");
2832 if (fwrite(image
, len
, 1, file
) != 1)
2833 error(1, 0, "unable to write output file");
2839 for (i
= 0; parts
[i
].name
; i
++)
2840 free_image_partition(parts
[i
]);
2844 static void usage(const char *argv0
) {
2846 "Usage: %s [OPTIONS...]\n"
2849 " -h show this help\n"
2851 "Create a new image:\n"
2852 " -B <board> create image for the board specified with <board>\n"
2853 " -k <file> read kernel image from the file <file>\n"
2854 " -r <file> read rootfs image from the file <file>\n"
2855 " -o <file> write output to the file <file>\n"
2856 " -V <rev> sets the revision number to <rev>\n"
2857 " -j add jffs2 end-of-filesystem markers\n"
2858 " -S create sysupgrade instead of factory image\n"
2859 "Extract an old image:\n"
2860 " -x <file> extract all oem firmware partition\n"
2861 " -d <dir> destination to extract the firmware partition\n"
2862 " -z <file> convert an oem firmware into a sysupgade file. Use -o for output file\n",
2868 static struct device_info
*find_board(const char *id
)
2870 struct device_info
*board
= NULL
;
2872 for (board
= boards
; board
->id
!= NULL
; board
++)
2873 if (strcasecmp(id
, board
->id
) == 0)
2879 static int add_flash_partition(
2880 struct flash_partition_entry
*part_list
,
2887 /* check if the list has a free entry */
2888 for (ptr
= 0; ptr
< max_entries
; ptr
++, part_list
++) {
2889 if (part_list
->name
== NULL
&&
2890 part_list
->base
== 0 &&
2891 part_list
->size
== 0)
2895 if (ptr
== max_entries
) {
2896 error(1, 0, "No free flash part entry available.");
2899 part_list
->name
= calloc(1, strlen(name
) + 1);
2900 if (!part_list
->name
) {
2901 error(1, 0, "Unable to allocate memory");
2904 memcpy((char *)part_list
->name
, name
, strlen(name
));
2905 part_list
->base
= base
;
2906 part_list
->size
= size
;
2911 /** read the partition table into struct flash_partition_entry */
2912 static int read_partition_table(
2913 FILE *file
, long offset
,
2914 struct flash_partition_entry
*entries
, size_t max_entries
,
2919 const char *parthdr
= NULL
;
2920 const char *fwuphdr
= "fwup-ptn";
2921 const char *flashhdr
= "partition";
2923 /* TODO: search for the partition table */
2933 error(1, 0, "Invalid partition table");
2936 if (fseek(file
, offset
, SEEK_SET
) < 0)
2937 error(1, errno
, "Can not seek in the firmware");
2939 if (fread(buf
, 2048, 1, file
) != 1)
2940 error(1, errno
, "Can not read fwup-ptn from the firmware");
2944 /* look for the partition header */
2945 if (memcmp(buf
, parthdr
, strlen(parthdr
)) != 0) {
2946 fprintf(stderr
, "DEBUG: can not find fwuphdr\n");
2951 end
= buf
+ sizeof(buf
);
2952 while ((ptr
+ strlen(parthdr
)) < end
&&
2953 memcmp(ptr
, parthdr
, strlen(parthdr
)) == 0) {
2957 char name
[32] = { 0 };
2959 unsigned long base
= 0;
2960 unsigned long size
= 0;
2962 end_part
= memchr(ptr
, '\n', (end
- ptr
));
2963 if (end_part
== NULL
) {
2964 /* in theory this should never happen, because a partition always ends with 0x09, 0x0D, 0x0A */
2968 for (int i
= 0; i
<= 4; i
++) {
2969 if (end_part
<= ptr
)
2972 end_element
= memchr(ptr
, 0x20, (end_part
- ptr
));
2973 if (end_element
== NULL
) {
2974 error(1, errno
, "Ignoring the rest of the partition entries.");
2979 /* partition header */
2981 ptr
= end_element
+ 1;
2985 name_len
= (end_element
- ptr
) > 31 ? 31 : (end_element
- ptr
);
2986 strncpy(name
, ptr
, name_len
);
2987 name
[name_len
] = '\0';
2988 ptr
= end_element
+ 1;
2993 ptr
= end_element
+ 1;
2998 base
= strtoul(ptr
, NULL
, 16);
2999 ptr
= end_element
+ 1;
3004 ptr
= end_element
+ 1;
3005 /* actual size. The last element doesn't have a sepeartor */
3006 size
= strtoul(ptr
, NULL
, 16);
3007 /* the part ends with 0x09, 0x0d, 0x0a */
3009 add_flash_partition(entries
, max_entries
, name
, base
, size
);
3018 static void write_partition(
3020 size_t firmware_offset
,
3021 struct flash_partition_entry
*entry
,
3027 fseek(input_file
, entry
->base
+ firmware_offset
, SEEK_SET
);
3029 for (offset
= 0; sizeof(buf
) + offset
<= entry
->size
; offset
+= sizeof(buf
)) {
3030 if (fread(buf
, sizeof(buf
), 1, input_file
) != 1)
3031 error(1, errno
, "Can not read partition from input_file");
3033 if (fwrite(buf
, sizeof(buf
), 1, output_file
) != 1)
3034 error(1, errno
, "Can not write partition to output_file");
3036 /* write last chunk smaller than buffer */
3037 if (offset
< entry
->size
) {
3038 offset
= entry
->size
- offset
;
3039 if (fread(buf
, offset
, 1, input_file
) != 1)
3040 error(1, errno
, "Can not read partition from input_file");
3041 if (fwrite(buf
, offset
, 1, output_file
) != 1)
3042 error(1, errno
, "Can not write partition to output_file");
3046 static int extract_firmware_partition(FILE *input_file
, size_t firmware_offset
, struct flash_partition_entry
*entry
, const char *output_directory
)
3049 char output
[PATH_MAX
];
3051 snprintf(output
, PATH_MAX
, "%s/%s", output_directory
, entry
->name
);
3052 output_file
= fopen(output
, "wb+");
3053 if (output_file
== NULL
) {
3054 error(1, errno
, "Can not open output file %s", output
);
3057 write_partition(input_file
, firmware_offset
, entry
, output_file
);
3059 fclose(output_file
);
3064 /** extract all partitions from the firmware file */
3065 static int extract_firmware(const char *input
, const char *output_directory
)
3067 struct flash_partition_entry entries
[16] = { 0 };
3068 size_t max_entries
= 16;
3069 size_t firmware_offset
= 0x1014;
3072 struct stat statbuf
;
3074 /* check input file */
3075 if (stat(input
, &statbuf
)) {
3076 error(1, errno
, "Can not read input firmware %s", input
);
3079 /* check if output directory exists */
3080 if (stat(output_directory
, &statbuf
)) {
3081 error(1, errno
, "Failed to stat output directory %s", output_directory
);
3084 if ((statbuf
.st_mode
& S_IFMT
) != S_IFDIR
) {
3085 error(1, errno
, "Given output directory is not a directory %s", output_directory
);
3088 input_file
= fopen(input
, "rb");
3090 if (read_partition_table(input_file
, firmware_offset
, entries
, 16, 0) != 0) {
3091 error(1, 0, "Error can not read the partition table (fwup-ptn)");
3094 for (size_t i
= 0; i
< max_entries
; i
++) {
3095 if (entries
[i
].name
== NULL
&&
3096 entries
[i
].base
== 0 &&
3097 entries
[i
].size
== 0)
3100 extract_firmware_partition(input_file
, firmware_offset
, &entries
[i
], output_directory
);
3106 static struct flash_partition_entry
*find_partition(
3107 struct flash_partition_entry
*entries
, size_t max_entries
,
3108 const char *name
, const char *error_msg
)
3110 for (size_t i
= 0; i
< max_entries
; i
++, entries
++) {
3111 if (strcmp(entries
->name
, name
) == 0)
3115 error(1, 0, "%s", error_msg
);
3119 static void write_ff(FILE *output_file
, size_t size
)
3124 memset(buf
, 0xff, sizeof(buf
));
3126 for (offset
= 0; offset
+ sizeof(buf
) < size
; offset
+= sizeof(buf
)) {
3127 if (fwrite(buf
, sizeof(buf
), 1, output_file
) != 1)
3128 error(1, errno
, "Can not write 0xff to output_file");
3131 /* write last chunk smaller than buffer */
3132 if (offset
< size
) {
3133 offset
= size
- offset
;
3134 if (fwrite(buf
, offset
, 1, output_file
) != 1)
3135 error(1, errno
, "Can not write partition to output_file");
3139 static void convert_firmware(const char *input
, const char *output
)
3141 struct flash_partition_entry fwup
[MAX_PARTITIONS
] = { 0 };
3142 struct flash_partition_entry flash
[MAX_PARTITIONS
] = { 0 };
3143 struct flash_partition_entry
*fwup_os_image
= NULL
, *fwup_file_system
= NULL
;
3144 struct flash_partition_entry
*flash_os_image
= NULL
, *flash_file_system
= NULL
;
3145 struct flash_partition_entry
*fwup_partition_table
= NULL
;
3146 size_t firmware_offset
= 0x1014;
3147 FILE *input_file
, *output_file
;
3149 struct stat statbuf
;
3151 /* check input file */
3152 if (stat(input
, &statbuf
)) {
3153 error(1, errno
, "Can not read input firmware %s", input
);
3156 input_file
= fopen(input
, "rb");
3158 error(1, 0, "Can not open input firmware %s", input
);
3160 output_file
= fopen(output
, "wb");
3162 error(1, 0, "Can not open output firmware %s", output
);
3164 if (read_partition_table(input_file
, firmware_offset
, fwup
, MAX_PARTITIONS
, 0) != 0) {
3165 error(1, 0, "Error can not read the partition table (fwup-ptn)");
3168 fwup_os_image
= find_partition(fwup
, MAX_PARTITIONS
,
3169 "os-image", "Error can not find os-image partition (fwup)");
3170 fwup_file_system
= find_partition(fwup
, MAX_PARTITIONS
,
3171 "file-system", "Error can not find file-system partition (fwup)");
3172 fwup_partition_table
= find_partition(fwup
, MAX_PARTITIONS
,
3173 "partition-table", "Error can not find partition-table partition");
3175 /* the flash partition table has a 0x00000004 magic haeder */
3176 if (read_partition_table(input_file
, firmware_offset
+ fwup_partition_table
->base
+ 4, flash
, MAX_PARTITIONS
, 1) != 0)
3177 error(1, 0, "Error can not read the partition table (flash)");
3179 flash_os_image
= find_partition(flash
, MAX_PARTITIONS
,
3180 "os-image", "Error can not find os-image partition (flash)");
3181 flash_file_system
= find_partition(flash
, MAX_PARTITIONS
,
3182 "file-system", "Error can not find file-system partition (flash)");
3184 /* write os_image to 0x0 */
3185 write_partition(input_file
, firmware_offset
, fwup_os_image
, output_file
);
3186 write_ff(output_file
, flash_os_image
->size
- fwup_os_image
->size
);
3188 /* write file-system behind os_image */
3189 fseek(output_file
, flash_file_system
->base
- flash_os_image
->base
, SEEK_SET
);
3190 write_partition(input_file
, firmware_offset
, fwup_file_system
, output_file
);
3191 write_ff(output_file
, flash_file_system
->size
- fwup_file_system
->size
);
3193 fclose(output_file
);
3197 int main(int argc
, char *argv
[]) {
3198 const char *board
= NULL
, *kernel_image
= NULL
, *rootfs_image
= NULL
, *output
= NULL
;
3199 const char *extract_image
= NULL
, *output_directory
= NULL
, *convert_image
= NULL
;
3200 bool add_jffs2_eof
= false, sysupgrade
= false;
3202 struct device_info
*info
;
3203 set_source_date_epoch();
3208 c
= getopt(argc
, argv
, "B:k:r:o:V:jSh:x:d:z:");
3218 kernel_image
= optarg
;
3222 rootfs_image
= optarg
;
3230 sscanf(optarg
, "r%u", &rev
);
3234 add_jffs2_eof
= true;
3246 output_directory
= optarg
;
3250 extract_image
= optarg
;
3254 convert_image
= optarg
;
3263 if (extract_image
|| output_directory
) {
3265 error(1, 0, "No factory/oem image given via -x <file>. Output directory is only valid with -x");
3266 if (!output_directory
)
3267 error(1, 0, "Can not extract an image without output directory. Use -d <dir>");
3268 extract_firmware(extract_image
, output_directory
);
3269 } else if (convert_image
) {
3271 error(1, 0, "Can not convert a factory/oem image into sysupgrade image without output file. Use -o <file>");
3272 convert_firmware(convert_image
, output
);
3275 error(1, 0, "no board has been specified");
3277 error(1, 0, "no kernel image has been specified");
3279 error(1, 0, "no rootfs image has been specified");
3281 error(1, 0, "no output filename has been specified");
3283 info
= find_board(board
);
3286 error(1, 0, "unsupported board %s", board
);
3288 build_image(output
, kernel_image
, rootfs_image
, rev
, add_jffs2_eof
, sysupgrade
, info
);