2 Copyright (c) 2014, Matthias Schiffer <mschiffer@universe-factory.net>
5 Redistribution and use in source and binary forms, with or without
6 modification, are permitted provided that the following conditions are met:
8 1. Redistributions of source code must retain the above copyright notice,
9 this list of conditions and the following disclaimer.
10 2. Redistributions in binary form must reproduce the above copyright notice,
11 this list of conditions and the following disclaimer in the documentation
12 and/or other materials provided with the distribution.
14 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
15 AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16 IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
17 DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
18 FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19 DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
20 SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
21 CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
22 OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
23 OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
30 Image generation tool for the TP-LINK SafeLoader as seen on
31 TP-LINK Pharos devices (CPE210/220/510/520)
45 #include <arpa/inet.h>
47 #include <sys/types.h>
54 #define ALIGN(x,a) ({ typeof(a) __a = (a); (((x) + __a - 1) & ~(__a - 1)); })
57 #define MAX_PARTITIONS 32
59 /** An image partition table entry */
60 struct image_partition_entry
{
66 /** A flash partition table entry */
67 struct flash_partition_entry
{
73 /** Firmware layout description */
77 const char *support_list
;
80 struct flash_partition_entry partitions
[MAX_PARTITIONS
+1];
81 const char *first_sysupgrade_partition
;
82 const char *last_sysupgrade_partition
;
85 /** The content of the soft-version structure */
86 struct __attribute__((__packed__
)) soft_version
{
90 uint8_t version_major
;
91 uint8_t version_minor
;
92 uint8_t version_patch
;
102 static const uint8_t jffs2_eof_mark
[4] = {0xde, 0xad, 0xc0, 0xde};
106 Salt for the MD5 hash
108 Fortunately, TP-LINK seems to use the same salt for most devices which use
109 the new image format.
111 static const uint8_t md5_salt
[16] = {
112 0x7a, 0x2b, 0x15, 0xed,
113 0x9b, 0x98, 0x59, 0x6d,
114 0xe5, 0x04, 0xab, 0x44,
115 0xac, 0x2a, 0x9f, 0x4e,
119 /** Firmware layout table */
120 static struct device_info boards
[] = {
121 /** Firmware layout for the CPE210/220 V1 */
124 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
127 "CPE210(TP-LINK|UN|N300-2):1.0\r\n"
128 "CPE210(TP-LINK|UN|N300-2):1.1\r\n"
129 "CPE210(TP-LINK|US|N300-2):1.1\r\n"
130 "CPE210(TP-LINK|EU|N300-2):1.1\r\n"
131 "CPE220(TP-LINK|UN|N300-2):1.1\r\n"
132 "CPE220(TP-LINK|US|N300-2):1.1\r\n"
133 "CPE220(TP-LINK|EU|N300-2):1.1\r\n",
134 .support_trail
= '\xff',
138 {"fs-uboot", 0x00000, 0x20000},
139 {"partition-table", 0x20000, 0x02000},
140 {"default-mac", 0x30000, 0x00020},
141 {"product-info", 0x31100, 0x00100},
142 {"signature", 0x32000, 0x00400},
143 {"os-image", 0x40000, 0x200000},
144 {"file-system", 0x240000, 0x570000},
145 {"soft-version", 0x7b0000, 0x00100},
146 {"support-list", 0x7b1000, 0x00400},
147 {"user-config", 0x7c0000, 0x10000},
148 {"default-config", 0x7d0000, 0x10000},
149 {"log", 0x7e0000, 0x10000},
150 {"radio", 0x7f0000, 0x10000},
154 .first_sysupgrade_partition
= "os-image",
155 .last_sysupgrade_partition
= "support-list",
158 /** Firmware layout for the CPE210 V2 */
161 .vendor
= "CPE210(TP-LINK|UN|N300-2|00000000):2.0\r\n",
164 "CPE210(TP-LINK|EU|N300-2|00000000):2.0\r\n"
165 "CPE210(TP-LINK|EU|N300-2|45550000):2.0\r\n"
166 "CPE210(TP-LINK|EU|N300-2|55530000):2.0\r\n"
167 "CPE210(TP-LINK|UN|N300-2|00000000):2.0\r\n"
168 "CPE210(TP-LINK|UN|N300-2|45550000):2.0\r\n"
169 "CPE210(TP-LINK|UN|N300-2|55530000):2.0\r\n"
170 "CPE210(TP-LINK|US|N300-2|55530000):2.0\r\n"
171 "CPE210(TP-LINK|UN|N300-2):2.0\r\n"
172 "CPE210(TP-LINK|EU|N300-2):2.0\r\n"
173 "CPE210(TP-LINK|US|N300-2):2.0\r\n",
174 .support_trail
= '\xff',
178 {"fs-uboot", 0x00000, 0x20000},
179 {"partition-table", 0x20000, 0x02000},
180 {"default-mac", 0x30000, 0x00020},
181 {"product-info", 0x31100, 0x00100},
182 {"device-info", 0x31400, 0x00400},
183 {"signature", 0x32000, 0x00400},
184 {"device-id", 0x33000, 0x00100},
185 {"firmware", 0x40000, 0x770000},
186 {"soft-version", 0x7b0000, 0x00100},
187 {"support-list", 0x7b1000, 0x01000},
188 {"user-config", 0x7c0000, 0x10000},
189 {"default-config", 0x7d0000, 0x10000},
190 {"log", 0x7e0000, 0x10000},
191 {"radio", 0x7f0000, 0x10000},
195 .first_sysupgrade_partition
= "os-image",
196 .last_sysupgrade_partition
= "support-list",
199 /** Firmware layout for the CPE210 V3 */
202 .vendor
= "CPE210(TP-LINK|UN|N300-2|00000000):3.0\r\n",
205 "CPE210(TP-LINK|EU|N300-2|45550000):3.0\r\n"
206 "CPE210(TP-LINK|UN|N300-2|00000000):3.0\r\n"
207 "CPE210(TP-LINK|UN|N300-2):3.0\r\n"
208 "CPE210(TP-LINK|EU|N300-2):3.0\r\n",
209 .support_trail
= '\xff',
213 {"fs-uboot", 0x00000, 0x20000},
214 {"partition-table", 0x20000, 0x01000},
215 {"default-mac", 0x30000, 0x00020},
216 {"product-info", 0x31100, 0x00100},
217 {"device-info", 0x31400, 0x00400},
218 {"signature", 0x32000, 0x00400},
219 {"device-id", 0x33000, 0x00100},
220 {"firmware", 0x40000, 0x770000},
221 {"soft-version", 0x7b0000, 0x00100},
222 {"support-list", 0x7b1000, 0x01000},
223 {"user-config", 0x7c0000, 0x10000},
224 {"default-config", 0x7d0000, 0x10000},
225 {"log", 0x7e0000, 0x10000},
226 {"radio", 0x7f0000, 0x10000},
230 .first_sysupgrade_partition
= "os-image",
231 .last_sysupgrade_partition
= "support-list",
234 /** Firmware layout for the CPE220 V2 */
237 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
240 "CPE220(TP-LINK|EU|N300-2|00000000):2.0\r\n"
241 "CPE220(TP-LINK|EU|N300-2|45550000):2.0\r\n"
242 "CPE220(TP-LINK|EU|N300-2|55530000):2.0\r\n"
243 "CPE220(TP-LINK|UN|N300-2|00000000):2.0\r\n"
244 "CPE220(TP-LINK|UN|N300-2|45550000):2.0\r\n"
245 "CPE220(TP-LINK|UN|N300-2|55530000):2.0\r\n"
246 "CPE220(TP-LINK|US|N300-2|55530000):2.0\r\n"
247 "CPE220(TP-LINK|UN|N300-2):2.0\r\n"
248 "CPE220(TP-LINK|EU|N300-2):2.0\r\n"
249 "CPE220(TP-LINK|US|N300-2):2.0\r\n",
250 .support_trail
= '\xff',
254 {"fs-uboot", 0x00000, 0x20000},
255 {"partition-table", 0x20000, 0x02000},
256 {"default-mac", 0x30000, 0x00020},
257 {"product-info", 0x31100, 0x00100},
258 {"signature", 0x32000, 0x00400},
259 {"os-image", 0x40000, 0x200000},
260 {"file-system", 0x240000, 0x570000},
261 {"soft-version", 0x7b0000, 0x00100},
262 {"support-list", 0x7b1000, 0x00400},
263 {"user-config", 0x7c0000, 0x10000},
264 {"default-config", 0x7d0000, 0x10000},
265 {"log", 0x7e0000, 0x10000},
266 {"radio", 0x7f0000, 0x10000},
270 .first_sysupgrade_partition
= "os-image",
271 .last_sysupgrade_partition
= "support-list",
274 /** Firmware layout for the CPE220 V3 */
277 .vendor
= "CPE220(TP-LINK|UN|N300-2|00000000):3.0\r\n",
280 "CPE220(TP-LINK|EU|N300-2|00000000):3.0\r\n"
281 "CPE220(TP-LINK|EU|N300-2|45550000):3.0\r\n"
282 "CPE220(TP-LINK|EU|N300-2|55530000):3.0\r\n"
283 "CPE220(TP-LINK|UN|N300-2|00000000):3.0\r\n"
284 "CPE220(TP-LINK|UN|N300-2|45550000):3.0\r\n"
285 "CPE220(TP-LINK|UN|N300-2|55530000):3.0\r\n"
286 "CPE220(TP-LINK|US|N300-2|55530000):3.0\r\n"
287 "CPE220(TP-LINK|UN|N300-2):3.0\r\n"
288 "CPE220(TP-LINK|EU|N300-2):3.0\r\n"
289 "CPE220(TP-LINK|US|N300-2):3.0\r\n",
290 .support_trail
= '\xff',
294 {"fs-uboot", 0x00000, 0x20000},
295 {"partition-table", 0x20000, 0x02000},
296 {"default-mac", 0x30000, 0x00020},
297 {"product-info", 0x31100, 0x00100},
298 {"device-info", 0x31400, 0x00400},
299 {"signature", 0x32000, 0x00400},
300 {"device-id", 0x33000, 0x00100},
301 {"firmware", 0x40000, 0x770000},
302 {"soft-version", 0x7b0000, 0x00100},
303 {"support-list", 0x7b1000, 0x01000},
304 {"user-config", 0x7c0000, 0x10000},
305 {"default-config", 0x7d0000, 0x10000},
306 {"log", 0x7e0000, 0x10000},
307 {"radio", 0x7f0000, 0x10000},
311 .first_sysupgrade_partition
= "os-image",
312 .last_sysupgrade_partition
= "support-list",
315 /** Firmware layout for the CPE510/520 V1 */
318 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
321 "CPE510(TP-LINK|UN|N300-5):1.0\r\n"
322 "CPE510(TP-LINK|UN|N300-5):1.1\r\n"
323 "CPE510(TP-LINK|UN|N300-5):1.1\r\n"
324 "CPE510(TP-LINK|US|N300-5):1.1\r\n"
325 "CPE510(TP-LINK|EU|N300-5):1.1\r\n"
326 "CPE520(TP-LINK|UN|N300-5):1.1\r\n"
327 "CPE520(TP-LINK|US|N300-5):1.1\r\n"
328 "CPE520(TP-LINK|EU|N300-5):1.1\r\n",
329 .support_trail
= '\xff',
333 {"fs-uboot", 0x00000, 0x20000},
334 {"partition-table", 0x20000, 0x02000},
335 {"default-mac", 0x30000, 0x00020},
336 {"product-info", 0x31100, 0x00100},
337 {"signature", 0x32000, 0x00400},
338 {"os-image", 0x40000, 0x200000},
339 {"file-system", 0x240000, 0x570000},
340 {"soft-version", 0x7b0000, 0x00100},
341 {"support-list", 0x7b1000, 0x00400},
342 {"user-config", 0x7c0000, 0x10000},
343 {"default-config", 0x7d0000, 0x10000},
344 {"log", 0x7e0000, 0x10000},
345 {"radio", 0x7f0000, 0x10000},
349 .first_sysupgrade_partition
= "os-image",
350 .last_sysupgrade_partition
= "support-list",
353 /** Firmware layout for the CPE510 V2 */
356 .vendor
= "CPE510(TP-LINK|UN|N300-5):2.0\r\n",
359 "CPE510(TP-LINK|EU|N300-5|00000000):2.0\r\n"
360 "CPE510(TP-LINK|EU|N300-5|45550000):2.0\r\n"
361 "CPE510(TP-LINK|EU|N300-5|55530000):2.0\r\n"
362 "CPE510(TP-LINK|UN|N300-5|00000000):2.0\r\n"
363 "CPE510(TP-LINK|UN|N300-5|45550000):2.0\r\n"
364 "CPE510(TP-LINK|UN|N300-5|55530000):2.0\r\n"
365 "CPE510(TP-LINK|US|N300-5|00000000):2.0\r\n"
366 "CPE510(TP-LINK|US|N300-5|45550000):2.0\r\n"
367 "CPE510(TP-LINK|US|N300-5|55530000):2.0\r\n"
368 "CPE510(TP-LINK|UN|N300-5):2.0\r\n"
369 "CPE510(TP-LINK|EU|N300-5):2.0\r\n"
370 "CPE510(TP-LINK|US|N300-5):2.0\r\n",
371 .support_trail
= '\xff',
375 {"fs-uboot", 0x00000, 0x20000},
376 {"partition-table", 0x20000, 0x02000},
377 {"default-mac", 0x30000, 0x00020},
378 {"product-info", 0x31100, 0x00100},
379 {"signature", 0x32000, 0x00400},
380 {"os-image", 0x40000, 0x200000},
381 {"file-system", 0x240000, 0x570000},
382 {"soft-version", 0x7b0000, 0x00100},
383 {"support-list", 0x7b1000, 0x00400},
384 {"user-config", 0x7c0000, 0x10000},
385 {"default-config", 0x7d0000, 0x10000},
386 {"log", 0x7e0000, 0x10000},
387 {"radio", 0x7f0000, 0x10000},
391 .first_sysupgrade_partition
= "os-image",
392 .last_sysupgrade_partition
= "support-list",
395 /** Firmware layout for the CPE510 V3 */
398 .vendor
= "CPE510(TP-LINK|UN|N300-5):3.0\r\n",
401 "CPE510(TP-LINK|EU|N300-5|00000000):3.0\r\n"
402 "CPE510(TP-LINK|EU|N300-5|45550000):3.0\r\n"
403 "CPE510(TP-LINK|EU|N300-5|55530000):3.0\r\n"
404 "CPE510(TP-LINK|UN|N300-5|00000000):3.0\r\n"
405 "CPE510(TP-LINK|UN|N300-5|45550000):3.0\r\n"
406 "CPE510(TP-LINK|UN|N300-5|55530000):3.0\r\n"
407 "CPE510(TP-LINK|US|N300-5|00000000):3.0\r\n"
408 "CPE510(TP-LINK|US|N300-5|45550000):3.0\r\n"
409 "CPE510(TP-LINK|US|N300-5|55530000):3.0\r\n"
410 "CPE510(TP-LINK|UN|N300-5):3.0\r\n"
411 "CPE510(TP-LINK|EU|N300-5):3.0\r\n"
412 "CPE510(TP-LINK|US|N300-5):3.0\r\n",
413 .support_trail
= '\xff',
417 {"fs-uboot", 0x00000, 0x20000},
418 {"partition-table", 0x20000, 0x02000},
419 {"default-mac", 0x30000, 0x00020},
420 {"product-info", 0x31100, 0x00100},
421 {"signature", 0x32000, 0x00400},
422 {"os-image", 0x40000, 0x200000},
423 {"file-system", 0x240000, 0x570000},
424 {"soft-version", 0x7b0000, 0x00100},
425 {"support-list", 0x7b1000, 0x00400},
426 {"user-config", 0x7c0000, 0x10000},
427 {"default-config", 0x7d0000, 0x10000},
428 {"log", 0x7e0000, 0x10000},
429 {"radio", 0x7f0000, 0x10000},
433 .first_sysupgrade_partition
= "os-image",
434 .last_sysupgrade_partition
= "support-list",
437 /** Firmware layout for the CPE610V1 */
440 .vendor
= "CPE610(TP-LINK|UN|N300-5|00000000):1.0\r\n",
443 "CPE610(TP-LINK|EU|N300-5|00000000):1.0\r\n"
444 "CPE610(TP-LINK|EU|N300-5|45550000):1.0\r\n"
445 "CPE610(TP-LINK|EU|N300-5|55530000):1.0\r\n"
446 "CPE610(TP-LINK|UN|N300-5|00000000):1.0\r\n"
447 "CPE610(TP-LINK|UN|N300-5|45550000):1.0\r\n"
448 "CPE610(TP-LINK|UN|N300-5|55530000):1.0\r\n"
449 "CPE610(TP-LINK|US|N300-5|55530000):1.0\r\n"
450 "CPE610(TP-LINK|UN|N300-5):1.0\r\n"
451 "CPE610(TP-LINK|EU|N300-5):1.0\r\n"
452 "CPE610(TP-LINK|US|N300-5):1.0\r\n",
453 .support_trail
= '\xff',
457 {"fs-uboot", 0x00000, 0x20000},
458 {"partition-table", 0x20000, 0x02000},
459 {"default-mac", 0x30000, 0x00020},
460 {"product-info", 0x31100, 0x00100},
461 {"signature", 0x32000, 0x00400},
462 {"os-image", 0x40000, 0x200000},
463 {"file-system", 0x240000, 0x570000},
464 {"soft-version", 0x7b0000, 0x00100},
465 {"support-list", 0x7b1000, 0x00400},
466 {"user-config", 0x7c0000, 0x10000},
467 {"default-config", 0x7d0000, 0x10000},
468 {"log", 0x7e0000, 0x10000},
469 {"radio", 0x7f0000, 0x10000},
473 .first_sysupgrade_partition
= "os-image",
474 .last_sysupgrade_partition
= "support-list",
479 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
482 "WBS210(TP-LINK|UN|N300-2):1.20\r\n"
483 "WBS210(TP-LINK|US|N300-2):1.20\r\n"
484 "WBS210(TP-LINK|EU|N300-2):1.20\r\n",
485 .support_trail
= '\xff',
489 {"fs-uboot", 0x00000, 0x20000},
490 {"partition-table", 0x20000, 0x02000},
491 {"default-mac", 0x30000, 0x00020},
492 {"product-info", 0x31100, 0x00100},
493 {"signature", 0x32000, 0x00400},
494 {"os-image", 0x40000, 0x200000},
495 {"file-system", 0x240000, 0x570000},
496 {"soft-version", 0x7b0000, 0x00100},
497 {"support-list", 0x7b1000, 0x00400},
498 {"user-config", 0x7c0000, 0x10000},
499 {"default-config", 0x7d0000, 0x10000},
500 {"log", 0x7e0000, 0x10000},
501 {"radio", 0x7f0000, 0x10000},
505 .first_sysupgrade_partition
= "os-image",
506 .last_sysupgrade_partition
= "support-list",
511 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
514 "WBS210(TP-LINK|UN|N300-2|00000000):2.0\r\n"
515 "WBS210(TP-LINK|US|N300-2|55530000):2.0\r\n"
516 "WBS210(TP-LINK|EU|N300-2|45550000):2.0\r\n",
517 .support_trail
= '\xff',
521 {"fs-uboot", 0x00000, 0x20000},
522 {"partition-table", 0x20000, 0x02000},
523 {"default-mac", 0x30000, 0x00020},
524 {"product-info", 0x31100, 0x00100},
525 {"signature", 0x32000, 0x00400},
526 {"os-image", 0x40000, 0x200000},
527 {"file-system", 0x240000, 0x570000},
528 {"soft-version", 0x7b0000, 0x00100},
529 {"support-list", 0x7b1000, 0x00400},
530 {"user-config", 0x7c0000, 0x10000},
531 {"default-config", 0x7d0000, 0x10000},
532 {"log", 0x7e0000, 0x10000},
533 {"radio", 0x7f0000, 0x10000},
537 .first_sysupgrade_partition
= "os-image",
538 .last_sysupgrade_partition
= "support-list",
543 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
546 "WBS510(TP-LINK|UN|N300-5):1.20\r\n"
547 "WBS510(TP-LINK|US|N300-5):1.20\r\n"
548 "WBS510(TP-LINK|EU|N300-5):1.20\r\n"
549 "WBS510(TP-LINK|CA|N300-5):1.20\r\n",
550 .support_trail
= '\xff',
554 {"fs-uboot", 0x00000, 0x20000},
555 {"partition-table", 0x20000, 0x02000},
556 {"default-mac", 0x30000, 0x00020},
557 {"product-info", 0x31100, 0x00100},
558 {"signature", 0x32000, 0x00400},
559 {"os-image", 0x40000, 0x200000},
560 {"file-system", 0x240000, 0x570000},
561 {"soft-version", 0x7b0000, 0x00100},
562 {"support-list", 0x7b1000, 0x00400},
563 {"user-config", 0x7c0000, 0x10000},
564 {"default-config", 0x7d0000, 0x10000},
565 {"log", 0x7e0000, 0x10000},
566 {"radio", 0x7f0000, 0x10000},
570 .first_sysupgrade_partition
= "os-image",
571 .last_sysupgrade_partition
= "support-list",
576 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
579 "WBS510(TP-LINK|UN|N300-5|00000000):2.0\r\n"
580 "WBS510(TP-LINK|US|N300-5|55530000):2.0\r\n"
581 "WBS510(TP-LINK|EU|N300-5|45550000):2.0\r\n"
582 "WBS510(TP-LINK|CA|N300-5|43410000):2.0\r\n",
583 .support_trail
= '\xff',
587 {"fs-uboot", 0x00000, 0x20000},
588 {"partition-table", 0x20000, 0x02000},
589 {"default-mac", 0x30000, 0x00020},
590 {"product-info", 0x31100, 0x00100},
591 {"signature", 0x32000, 0x00400},
592 {"os-image", 0x40000, 0x200000},
593 {"file-system", 0x240000, 0x570000},
594 {"soft-version", 0x7b0000, 0x00100},
595 {"support-list", 0x7b1000, 0x00400},
596 {"user-config", 0x7c0000, 0x10000},
597 {"default-config", 0x7d0000, 0x10000},
598 {"log", 0x7e0000, 0x10000},
599 {"radio", 0x7f0000, 0x10000},
603 .first_sysupgrade_partition
= "os-image",
604 .last_sysupgrade_partition
= "support-list",
607 /** Firmware layout for the C2600 */
613 "{product_name:Archer C2600,product_ver:1.0.0,special_id:00000000}\r\n",
614 .support_trail
= '\x00',
618 We use a bigger os-image partition than the stock images (and thus
619 smaller file-system), as our kernel doesn't fit in the stock firmware's
620 2 MB os-image since kernel 4.14.
623 {"SBL1", 0x00000, 0x20000},
624 {"MIBIB", 0x20000, 0x20000},
625 {"SBL2", 0x40000, 0x20000},
626 {"SBL3", 0x60000, 0x30000},
627 {"DDRCONFIG", 0x90000, 0x10000},
628 {"SSD", 0xa0000, 0x10000},
629 {"TZ", 0xb0000, 0x30000},
630 {"RPM", 0xe0000, 0x20000},
631 {"fs-uboot", 0x100000, 0x70000},
632 {"uboot-env", 0x170000, 0x40000},
633 {"radio", 0x1b0000, 0x40000},
634 {"os-image", 0x1f0000, 0x400000}, /* Stock: base 0x1f0000 size 0x200000 */
635 {"file-system", 0x5f0000, 0x1900000}, /* Stock: base 0x3f0000 size 0x1b00000 */
636 {"default-mac", 0x1ef0000, 0x00200},
637 {"pin", 0x1ef0200, 0x00200},
638 {"product-info", 0x1ef0400, 0x0fc00},
639 {"partition-table", 0x1f00000, 0x10000},
640 {"soft-version", 0x1f10000, 0x10000},
641 {"support-list", 0x1f20000, 0x10000},
642 {"profile", 0x1f30000, 0x10000},
643 {"default-config", 0x1f40000, 0x10000},
644 {"user-config", 0x1f50000, 0x40000},
645 {"qos-db", 0x1f90000, 0x40000},
646 {"usb-config", 0x1fd0000, 0x10000},
647 {"log", 0x1fe0000, 0x20000},
651 .first_sysupgrade_partition
= "os-image",
652 .last_sysupgrade_partition
= "file-system"
655 /** Firmware layout for the A7-V5 */
657 .id
= "ARCHER-A7-V5",
660 "{product_name:Archer A7,product_ver:5.0.0,special_id:45550000}\n"
661 "{product_name:Archer A7,product_ver:5.0.0,special_id:55530000}\n"
662 "{product_name:Archer A7,product_ver:5.0.0,special_id:43410000}\n"
663 "{product_name:Archer A7,product_ver:5.0.0,special_id:4A500000}\n"
664 "{product_name:Archer A7,product_ver:5.0.0,special_id:54570000}\n",
665 .support_trail
= '\x00',
666 .soft_ver
= "soft_ver:1.0.0\n",
668 /* We're using a dynamic kernel/rootfs split here */
670 {"factory-boot", 0x00000, 0x20000},
671 {"fs-uboot", 0x20000, 0x20000},
672 {"firmware", 0x40000, 0xec0000}, /* Stock: name os-image base 0x40000 size 0x120000 */
673 /* Stock: name file-system base 0x160000 size 0xda0000 */
674 {"default-mac", 0xf40000, 0x00200},
675 {"pin", 0xf40200, 0x00200},
676 {"device-id", 0xf40400, 0x00100},
677 {"product-info", 0xf40500, 0x0fb00},
678 {"soft-version", 0xf50000, 0x00100},
679 {"extra-para", 0xf51000, 0x01000},
680 {"support-list", 0xf52000, 0x0a000},
681 {"profile", 0xf5c000, 0x04000},
682 {"default-config", 0xf60000, 0x10000},
683 {"user-config", 0xf70000, 0x40000},
684 {"certificate", 0xfb0000, 0x10000},
685 {"partition-table", 0xfc0000, 0x10000},
686 {"log", 0xfd0000, 0x20000},
687 {"radio", 0xff0000, 0x10000},
691 .first_sysupgrade_partition
= "os-image",
692 .last_sysupgrade_partition
= "file-system",
695 /** Firmware layout for the C2v3 */
697 .id
= "ARCHER-C2-V3",
700 "{product_name:ArcherC2,product_ver:3.0.0,special_id:00000000}\n"
701 "{product_name:ArcherC2,product_ver:3.0.0,special_id:55530000}\n"
702 "{product_name:ArcherC2,product_ver:3.0.0,special_id:45550000}\n",
703 .support_trail
= '\x00',
704 .soft_ver
= "soft_ver:3.0.1\n",
706 /** We're using a dynamic kernel/rootfs split here */
709 {"factory-boot", 0x00000, 0x20000},
710 {"fs-uboot", 0x20000, 0x10000},
711 {"firmware", 0x30000, 0x7a0000},
712 {"user-config", 0x7d0000, 0x04000},
713 {"default-mac", 0x7e0000, 0x00100},
714 {"device-id", 0x7e0100, 0x00100},
715 {"extra-para", 0x7e0200, 0x00100},
716 {"pin", 0x7e0300, 0x00100},
717 {"support-list", 0x7e0400, 0x00400},
718 {"soft-version", 0x7e0800, 0x00400},
719 {"product-info", 0x7e0c00, 0x01400},
720 {"partition-table", 0x7e2000, 0x01000},
721 {"profile", 0x7e3000, 0x01000},
722 {"default-config", 0x7e4000, 0x04000},
723 {"merge-config", 0x7ec000, 0x02000},
724 {"qos-db", 0x7ee000, 0x02000},
725 {"radio", 0x7f0000, 0x10000},
729 .first_sysupgrade_partition
= "os-image",
730 .last_sysupgrade_partition
= "file-system",
733 /** Firmware layout for the C25v1 */
735 .id
= "ARCHER-C25-V1",
738 "{product_name:ArcherC25,product_ver:1.0.0,special_id:00000000}\n"
739 "{product_name:ArcherC25,product_ver:1.0.0,special_id:55530000}\n"
740 "{product_name:ArcherC25,product_ver:1.0.0,special_id:45550000}\n",
741 .support_trail
= '\x00',
742 .soft_ver
= "soft_ver:1.0.0\n",
744 /* We're using a dynamic kernel/rootfs split here */
746 {"factory-boot", 0x00000, 0x20000},
747 {"fs-uboot", 0x20000, 0x10000},
748 {"firmware", 0x30000, 0x7a0000}, /* Stock: name os-image base 0x30000 size 0x100000 */
749 /* Stock: name file-system base 0x130000 size 0x6a0000 */
750 {"user-config", 0x7d0000, 0x04000},
751 {"default-mac", 0x7e0000, 0x00100},
752 {"device-id", 0x7e0100, 0x00100},
753 {"extra-para", 0x7e0200, 0x00100},
754 {"pin", 0x7e0300, 0x00100},
755 {"support-list", 0x7e0400, 0x00400},
756 {"soft-version", 0x7e0800, 0x00400},
757 {"product-info", 0x7e0c00, 0x01400},
758 {"partition-table", 0x7e2000, 0x01000},
759 {"profile", 0x7e3000, 0x01000},
760 {"default-config", 0x7e4000, 0x04000},
761 {"merge-config", 0x7ec000, 0x02000},
762 {"qos-db", 0x7ee000, 0x02000},
763 {"radio", 0x7f0000, 0x10000},
767 .first_sysupgrade_partition
= "os-image",
768 .last_sysupgrade_partition
= "file-system",
771 /** Firmware layout for the C58v1 */
773 .id
= "ARCHER-C58-V1",
777 "{product_name:Archer C58,product_ver:1.0.0,special_id:00000000}\r\n"
778 "{product_name:Archer C58,product_ver:1.0.0,special_id:45550000}\r\n"
779 "{product_name:Archer C58,product_ver:1.0.0,special_id:55530000}\r\n",
780 .support_trail
= '\x00',
781 .soft_ver
= "soft_ver:1.0.0\n",
784 {"fs-uboot", 0x00000, 0x10000},
785 {"default-mac", 0x10000, 0x00200},
786 {"pin", 0x10200, 0x00200},
787 {"product-info", 0x10400, 0x00100},
788 {"partition-table", 0x10500, 0x00800},
789 {"soft-version", 0x11300, 0x00200},
790 {"support-list", 0x11500, 0x00100},
791 {"device-id", 0x11600, 0x00100},
792 {"profile", 0x11700, 0x03900},
793 {"default-config", 0x15000, 0x04000},
794 {"user-config", 0x19000, 0x04000},
795 {"firmware", 0x20000, 0x7c8000},
796 {"certyficate", 0x7e8000, 0x08000},
797 {"radio", 0x7f0000, 0x10000},
801 .first_sysupgrade_partition
= "os-image",
802 .last_sysupgrade_partition
= "file-system",
805 /** Firmware layout for the C59v1 */
807 .id
= "ARCHER-C59-V1",
811 "{product_name:Archer C59,product_ver:1.0.0,special_id:00000000}\r\n"
812 "{product_name:Archer C59,product_ver:1.0.0,special_id:45550000}\r\n"
813 "{product_name:Archer C59,product_ver:1.0.0,special_id:52550000}\r\n"
814 "{product_name:Archer C59,product_ver:1.0.0,special_id:55530000}\r\n",
815 .support_trail
= '\x00',
816 .soft_ver
= "soft_ver:1.0.0\n",
818 /* We're using a dynamic kernel/rootfs split here */
820 {"fs-uboot", 0x00000, 0x10000},
821 {"default-mac", 0x10000, 0x00200},
822 {"pin", 0x10200, 0x00200},
823 {"device-id", 0x10400, 0x00100},
824 {"product-info", 0x10500, 0x0fb00},
825 {"firmware", 0x20000, 0xe30000},
826 {"partition-table", 0xe50000, 0x10000},
827 {"soft-version", 0xe60000, 0x10000},
828 {"support-list", 0xe70000, 0x10000},
829 {"profile", 0xe80000, 0x10000},
830 {"default-config", 0xe90000, 0x10000},
831 {"user-config", 0xea0000, 0x40000},
832 {"usb-config", 0xee0000, 0x10000},
833 {"certificate", 0xef0000, 0x10000},
834 {"qos-db", 0xf00000, 0x40000},
835 {"log", 0xfe0000, 0x10000},
836 {"radio", 0xff0000, 0x10000},
840 .first_sysupgrade_partition
= "os-image",
841 .last_sysupgrade_partition
= "file-system",
844 /** Firmware layout for the C59v2 */
846 .id
= "ARCHER-C59-V2",
850 "{product_name:Archer C59,product_ver:2.0.0,special_id:00000000}\r\n"
851 "{product_name:Archer C59,product_ver:2.0.0,special_id:45550000}\r\n"
852 "{product_name:Archer C59,product_ver:2.0.0,special_id:55530000}\r\n",
853 .support_trail
= '\x00',
854 .soft_ver
= "soft_ver:2.0.0 Build 20161206 rel.7303\n",
856 /** We're using a dynamic kernel/rootfs split here */
858 {"factory-boot", 0x00000, 0x20000},
859 {"fs-uboot", 0x20000, 0x10000},
860 {"default-mac", 0x30000, 0x00200},
861 {"pin", 0x30200, 0x00200},
862 {"device-id", 0x30400, 0x00100},
863 {"product-info", 0x30500, 0x0fb00},
864 {"firmware", 0x40000, 0xe10000},
865 {"partition-table", 0xe50000, 0x10000},
866 {"soft-version", 0xe60000, 0x10000},
867 {"support-list", 0xe70000, 0x10000},
868 {"profile", 0xe80000, 0x10000},
869 {"default-config", 0xe90000, 0x10000},
870 {"user-config", 0xea0000, 0x40000},
871 {"usb-config", 0xee0000, 0x10000},
872 {"certificate", 0xef0000, 0x10000},
873 {"extra-para", 0xf00000, 0x10000},
874 {"qos-db", 0xf10000, 0x30000},
875 {"log", 0xfe0000, 0x10000},
876 {"radio", 0xff0000, 0x10000},
880 .first_sysupgrade_partition
= "os-image",
881 .last_sysupgrade_partition
= "file-system",
884 /** Firmware layout for the Archer C6 v2 (EU/RU/JP) */
886 .id
= "ARCHER-C6-V2",
890 "{product_name:Archer C6,product_ver:2.0.0,special_id:45550000}\r\n"
891 "{product_name:Archer C6,product_ver:2.0.0,special_id:52550000}\r\n"
892 "{product_name:Archer C6,product_ver:2.0.0,special_id:4A500000}\r\n",
893 .support_trail
= '\x00',
894 .soft_ver
= "soft_ver:1.0.0\n",
897 {"fs-uboot", 0x00000, 0x20000},
898 {"default-mac", 0x20000, 0x00200},
899 {"pin", 0x20200, 0x00100},
900 {"product-info", 0x20300, 0x00200},
901 {"device-id", 0x20500, 0x0fb00},
902 {"firmware", 0x30000, 0x7a9400},
903 {"soft-version", 0x7d9400, 0x00100},
904 {"extra-para", 0x7d9500, 0x00100},
905 {"support-list", 0x7d9600, 0x00200},
906 {"profile", 0x7d9800, 0x03000},
907 {"default-config", 0x7dc800, 0x03000},
908 {"partition-table", 0x7df800, 0x00800},
909 {"user-config", 0x7e0000, 0x0c000},
910 {"certificate", 0x7ec000, 0x04000},
911 {"radio", 0x7f0000, 0x10000},
915 .first_sysupgrade_partition
= "os-image",
916 .last_sysupgrade_partition
= "file-system",
919 /** Firmware layout for the Archer C6 v2 (US) and A6 v2 (US/TW) */
921 .id
= "ARCHER-C6-V2-US",
925 "{product_name:Archer A6,product_ver:2.0.0,special_id:55530000}\n"
926 "{product_name:Archer A6,product_ver:2.0.0,special_id:54570000}\n"
927 "{product_name:Archer C6,product_ver:2.0.0,special_id:55530000}\n",
928 .support_trail
= '\x00',
929 .soft_ver
= "soft_ver:1.1.1\n",
932 {"factory-boot", 0x00000, 0x20000},
933 {"default-mac", 0x20000, 0x00200},
934 {"pin", 0x20200, 0x00100},
935 {"product-info", 0x20300, 0x00200},
936 {"device-id", 0x20500, 0x0fb00},
937 {"fs-uboot", 0x30000, 0x20000},
938 {"firmware", 0x50000, 0xf89400},
939 {"soft-version", 0xfd9400, 0x00100},
940 {"extra-para", 0xfd9500, 0x00100},
941 {"support-list", 0xfd9600, 0x00200},
942 {"profile", 0xfd9800, 0x03000},
943 {"default-config", 0xfdc800, 0x03000},
944 {"partition-table", 0xfdf800, 0x00800},
945 {"user-config", 0xfe0000, 0x0c000},
946 {"certificate", 0xfec000, 0x04000},
947 {"radio", 0xff0000, 0x10000},
950 .first_sysupgrade_partition
= "os-image",
951 .last_sysupgrade_partition
= "file-system",
954 /** Firmware layout for the C60v1 */
956 .id
= "ARCHER-C60-V1",
960 "{product_name:Archer C60,product_ver:1.0.0,special_id:00000000}\r\n"
961 "{product_name:Archer C60,product_ver:1.0.0,special_id:45550000}\r\n"
962 "{product_name:Archer C60,product_ver:1.0.0,special_id:55530000}\r\n",
963 .support_trail
= '\x00',
964 .soft_ver
= "soft_ver:1.0.0\n",
967 {"fs-uboot", 0x00000, 0x10000},
968 {"default-mac", 0x10000, 0x00200},
969 {"pin", 0x10200, 0x00200},
970 {"product-info", 0x10400, 0x00100},
971 {"partition-table", 0x10500, 0x00800},
972 {"soft-version", 0x11300, 0x00200},
973 {"support-list", 0x11500, 0x00100},
974 {"device-id", 0x11600, 0x00100},
975 {"profile", 0x11700, 0x03900},
976 {"default-config", 0x15000, 0x04000},
977 {"user-config", 0x19000, 0x04000},
978 {"firmware", 0x20000, 0x7c8000},
979 {"certyficate", 0x7e8000, 0x08000},
980 {"radio", 0x7f0000, 0x10000},
984 .first_sysupgrade_partition
= "os-image",
985 .last_sysupgrade_partition
= "file-system",
988 /** Firmware layout for the C60v2 */
990 .id
= "ARCHER-C60-V2",
994 "{product_name:Archer C60,product_ver:2.0.0,special_id:42520000}\r\n"
995 "{product_name:Archer C60,product_ver:2.0.0,special_id:45550000}\r\n"
996 "{product_name:Archer C60,product_ver:2.0.0,special_id:55530000}\r\n",
997 .support_trail
= '\x00',
998 .soft_ver
= "soft_ver:2.0.0\n",
1001 {"factory-boot", 0x00000, 0x1fb00},
1002 {"default-mac", 0x1fb00, 0x00200},
1003 {"pin", 0x1fd00, 0x00100},
1004 {"product-info", 0x1fe00, 0x00100},
1005 {"device-id", 0x1ff00, 0x00100},
1006 {"fs-uboot", 0x20000, 0x10000},
1007 {"firmware", 0x30000, 0x7a0000},
1008 {"soft-version", 0x7d9500, 0x00100},
1009 {"support-list", 0x7d9600, 0x00100},
1010 {"extra-para", 0x7d9700, 0x00100},
1011 {"profile", 0x7d9800, 0x03000},
1012 {"default-config", 0x7dc800, 0x03000},
1013 {"partition-table", 0x7df800, 0x00800},
1014 {"user-config", 0x7e0000, 0x0c000},
1015 {"certificate", 0x7ec000, 0x04000},
1016 {"radio", 0x7f0000, 0x10000},
1020 .first_sysupgrade_partition
= "os-image",
1021 .last_sysupgrade_partition
= "file-system",
1024 /** Firmware layout for the C5 */
1026 .id
= "ARCHER-C5-V2",
1030 "{product_name:ArcherC5,product_ver:2.0.0,special_id:00000000}\r\n"
1031 "{product_name:ArcherC5,product_ver:2.0.0,special_id:55530000}\r\n"
1032 "{product_name:ArcherC5,product_ver:2.0.0,special_id:4A500000}\r\n", /* JP version */
1033 .support_trail
= '\x00',
1037 {"fs-uboot", 0x00000, 0x40000},
1038 {"os-image", 0x40000, 0x200000},
1039 {"file-system", 0x240000, 0xc00000},
1040 {"default-mac", 0xe40000, 0x00200},
1041 {"pin", 0xe40200, 0x00200},
1042 {"product-info", 0xe40400, 0x00200},
1043 {"partition-table", 0xe50000, 0x10000},
1044 {"soft-version", 0xe60000, 0x00200},
1045 {"support-list", 0xe61000, 0x0f000},
1046 {"profile", 0xe70000, 0x10000},
1047 {"default-config", 0xe80000, 0x10000},
1048 {"user-config", 0xe90000, 0x50000},
1049 {"log", 0xee0000, 0x100000},
1050 {"radio_bk", 0xfe0000, 0x10000},
1051 {"radio", 0xff0000, 0x10000},
1055 .first_sysupgrade_partition
= "os-image",
1056 .last_sysupgrade_partition
= "file-system"
1059 /** Firmware layout for the C7 */
1061 .id
= "ARCHER-C7-V4",
1064 "{product_name:Archer C7,product_ver:4.0.0,special_id:00000000}\n"
1065 "{product_name:Archer C7,product_ver:4.0.0,special_id:41550000}\n"
1066 "{product_name:Archer C7,product_ver:4.0.0,special_id:45550000}\n"
1067 "{product_name:Archer C7,product_ver:4.0.0,special_id:4B520000}\n"
1068 "{product_name:Archer C7,product_ver:4.0.0,special_id:42520000}\n"
1069 "{product_name:Archer C7,product_ver:4.0.0,special_id:4A500000}\n"
1070 "{product_name:Archer C7,product_ver:4.0.0,special_id:52550000}\n"
1071 "{product_name:Archer C7,product_ver:4.0.0,special_id:54570000}\n"
1072 "{product_name:Archer C7,product_ver:4.0.0,special_id:55530000}\n"
1073 "{product_name:Archer C7,product_ver:4.0.0,special_id:43410000}\n",
1074 .support_trail
= '\x00',
1075 .soft_ver
= "soft_ver:1.0.0\n",
1077 /* We're using a dynamic kernel/rootfs split here */
1079 {"factory-boot", 0x00000, 0x20000},
1080 {"fs-uboot", 0x20000, 0x20000},
1081 {"firmware", 0x40000, 0xEC0000}, /* Stock: name os-image base 0x40000 size 0x120000 */
1082 /* Stock: name file-system base 0x160000 size 0xda0000 */
1083 {"default-mac", 0xf00000, 0x00200},
1084 {"pin", 0xf00200, 0x00200},
1085 {"device-id", 0xf00400, 0x00100},
1086 {"product-info", 0xf00500, 0x0fb00},
1087 {"soft-version", 0xf10000, 0x00100},
1088 {"extra-para", 0xf11000, 0x01000},
1089 {"support-list", 0xf12000, 0x0a000},
1090 {"profile", 0xf1c000, 0x04000},
1091 {"default-config", 0xf20000, 0x10000},
1092 {"user-config", 0xf30000, 0x40000},
1093 {"qos-db", 0xf70000, 0x40000},
1094 {"certificate", 0xfb0000, 0x10000},
1095 {"partition-table", 0xfc0000, 0x10000},
1096 {"log", 0xfd0000, 0x20000},
1097 {"radio", 0xff0000, 0x10000},
1101 .first_sysupgrade_partition
= "os-image",
1102 .last_sysupgrade_partition
= "file-system",
1105 /** Firmware layout for the C7 v5*/
1107 .id
= "ARCHER-C7-V5",
1110 "{product_name:Archer C7,product_ver:5.0.0,special_id:00000000}\n"
1111 "{product_name:Archer C7,product_ver:5.0.0,special_id:45550000}\n"
1112 "{product_name:Archer C7,product_ver:5.0.0,special_id:55530000}\n"
1113 "{product_name:Archer C7,product_ver:5.0.0,special_id:43410000}\n"
1114 "{product_name:Archer C7,product_ver:5.0.0,special_id:4A500000}\n"
1115 "{product_name:Archer C7,product_ver:5.0.0,special_id:54570000}\n"
1116 "{product_name:Archer C7,product_ver:5.0.0,special_id:52550000}\n"
1117 "{product_name:Archer C7,product_ver:5.0.0,special_id:4B520000}\n",
1119 .support_trail
= '\x00',
1120 .soft_ver
= "soft_ver:1.0.0\n",
1122 /* We're using a dynamic kernel/rootfs split here */
1124 {"factory-boot", 0x00000, 0x20000},
1125 {"fs-uboot", 0x20000, 0x20000},
1126 {"partition-table", 0x40000, 0x10000},
1127 {"radio", 0x50000, 0x10000},
1128 {"default-mac", 0x60000, 0x00200},
1129 {"pin", 0x60200, 0x00200},
1130 {"device-id", 0x60400, 0x00100},
1131 {"product-info", 0x60500, 0x0fb00},
1132 {"soft-version", 0x70000, 0x01000},
1133 {"extra-para", 0x71000, 0x01000},
1134 {"support-list", 0x72000, 0x0a000},
1135 {"profile", 0x7c000, 0x04000},
1136 {"user-config", 0x80000, 0x40000},
1139 {"firmware", 0xc0000, 0xf00000}, /* Stock: name os-image base 0xc0000 size 0x120000 */
1140 /* Stock: name file-system base 0x1e0000 size 0xde0000 */
1142 {"log", 0xfc0000, 0x20000},
1143 {"certificate", 0xfe0000, 0x10000},
1144 {"default-config", 0xff0000, 0x10000},
1149 .first_sysupgrade_partition
= "os-image",
1150 .last_sysupgrade_partition
= "file-system",
1153 /** Firmware layout for the C9 */
1159 "{product_name:ArcherC9,"
1160 "product_ver:1.0.0,"
1161 "special_id:00000000}\n",
1162 .support_trail
= '\x00',
1166 {"fs-uboot", 0x00000, 0x40000},
1167 {"os-image", 0x40000, 0x200000},
1168 {"file-system", 0x240000, 0xc00000},
1169 {"default-mac", 0xe40000, 0x00200},
1170 {"pin", 0xe40200, 0x00200},
1171 {"product-info", 0xe40400, 0x00200},
1172 {"partition-table", 0xe50000, 0x10000},
1173 {"soft-version", 0xe60000, 0x00200},
1174 {"support-list", 0xe61000, 0x0f000},
1175 {"profile", 0xe70000, 0x10000},
1176 {"default-config", 0xe80000, 0x10000},
1177 {"user-config", 0xe90000, 0x50000},
1178 {"log", 0xee0000, 0x100000},
1179 {"radio_bk", 0xfe0000, 0x10000},
1180 {"radio", 0xff0000, 0x10000},
1184 .first_sysupgrade_partition
= "os-image",
1185 .last_sysupgrade_partition
= "file-system"
1188 /** Firmware layout for the EAP120 */
1191 .vendor
= "EAP120(TP-LINK|UN|N300-2):1.0\r\n",
1194 "EAP120(TP-LINK|UN|N300-2):1.0\r\n",
1195 .support_trail
= '\xff',
1199 {"fs-uboot", 0x00000, 0x20000},
1200 {"partition-table", 0x20000, 0x02000},
1201 {"default-mac", 0x30000, 0x00020},
1202 {"support-list", 0x31000, 0x00100},
1203 {"product-info", 0x31100, 0x00100},
1204 {"soft-version", 0x32000, 0x00100},
1205 {"os-image", 0x40000, 0x180000},
1206 {"file-system", 0x1c0000, 0x600000},
1207 {"user-config", 0x7c0000, 0x10000},
1208 {"backup-config", 0x7d0000, 0x10000},
1209 {"log", 0x7e0000, 0x10000},
1210 {"radio", 0x7f0000, 0x10000},
1214 .first_sysupgrade_partition
= "os-image",
1215 .last_sysupgrade_partition
= "file-system"
1218 /** Firmware layout for the TL-WA850RE v2 */
1220 .id
= "TLWA850REV2",
1224 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:55530000}\n"
1225 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:00000000}\n"
1226 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:55534100}\n"
1227 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:45550000}\n"
1228 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:4B520000}\n"
1229 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:42520000}\n"
1230 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:4A500000}\n"
1231 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:43410000}\n"
1232 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:41550000}\n"
1233 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:52550000}\n",
1234 .support_trail
= '\x00',
1238 576KB were moved from file-system to os-image
1239 in comparison to the stock image
1242 {"fs-uboot", 0x00000, 0x20000},
1243 {"os-image", 0x20000, 0x150000},
1244 {"file-system", 0x170000, 0x240000},
1245 {"partition-table", 0x3b0000, 0x02000},
1246 {"default-mac", 0x3c0000, 0x00020},
1247 {"pin", 0x3c0100, 0x00020},
1248 {"product-info", 0x3c1000, 0x01000},
1249 {"soft-version", 0x3c2000, 0x00100},
1250 {"support-list", 0x3c3000, 0x01000},
1251 {"profile", 0x3c4000, 0x08000},
1252 {"user-config", 0x3d0000, 0x10000},
1253 {"default-config", 0x3e0000, 0x10000},
1254 {"radio", 0x3f0000, 0x10000},
1258 .first_sysupgrade_partition
= "os-image",
1259 .last_sysupgrade_partition
= "file-system"
1262 /** Firmware layout for the TL-WA855RE v1 */
1264 .id
= "TLWA855REV1",
1268 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:00000000}\n"
1269 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:55530000}\n"
1270 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:45550000}\n"
1271 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:4B520000}\n"
1272 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:42520000}\n"
1273 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:4A500000}\n"
1274 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:43410000}\n"
1275 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:41550000}\n"
1276 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:52550000}\n",
1277 .support_trail
= '\x00',
1281 {"fs-uboot", 0x00000, 0x20000},
1282 {"os-image", 0x20000, 0x150000},
1283 {"file-system", 0x170000, 0x240000},
1284 {"partition-table", 0x3b0000, 0x02000},
1285 {"default-mac", 0x3c0000, 0x00020},
1286 {"pin", 0x3c0100, 0x00020},
1287 {"product-info", 0x3c1000, 0x01000},
1288 {"soft-version", 0x3c2000, 0x00100},
1289 {"support-list", 0x3c3000, 0x01000},
1290 {"profile", 0x3c4000, 0x08000},
1291 {"user-config", 0x3d0000, 0x10000},
1292 {"default-config", 0x3e0000, 0x10000},
1293 {"radio", 0x3f0000, 0x10000},
1297 .first_sysupgrade_partition
= "os-image",
1298 .last_sysupgrade_partition
= "file-system"
1301 /** Firmware layout for the TL-WR1043 v5 */
1303 .id
= "TLWR1043NV5",
1307 "{product_name:TL-WR1043N,product_ver:5.0.0,special_id:45550000}\n"
1308 "{product_name:TL-WR1043N,product_ver:5.0.0,special_id:55530000}\n",
1309 .support_trail
= '\x00',
1310 .soft_ver
= "soft_ver:1.0.0\n",
1312 {"factory-boot", 0x00000, 0x20000},
1313 {"fs-uboot", 0x20000, 0x20000},
1314 {"firmware", 0x40000, 0xec0000},
1315 {"default-mac", 0xf00000, 0x00200},
1316 {"pin", 0xf00200, 0x00200},
1317 {"device-id", 0xf00400, 0x00100},
1318 {"product-info", 0xf00500, 0x0fb00},
1319 {"soft-version", 0xf10000, 0x01000},
1320 {"extra-para", 0xf11000, 0x01000},
1321 {"support-list", 0xf12000, 0x0a000},
1322 {"profile", 0xf1c000, 0x04000},
1323 {"default-config", 0xf20000, 0x10000},
1324 {"user-config", 0xf30000, 0x40000},
1325 {"qos-db", 0xf70000, 0x40000},
1326 {"certificate", 0xfb0000, 0x10000},
1327 {"partition-table", 0xfc0000, 0x10000},
1328 {"log", 0xfd0000, 0x20000},
1329 {"radio", 0xff0000, 0x10000},
1332 .first_sysupgrade_partition
= "os-image",
1333 .last_sysupgrade_partition
= "file-system"
1336 /** Firmware layout for the TL-WR1043 v4 */
1338 .id
= "TLWR1043NDV4",
1342 "{product_name:TL-WR1043ND,product_ver:4.0.0,special_id:45550000}\n",
1343 .support_trail
= '\x00',
1346 /* We're using a dynamic kernel/rootfs split here */
1348 {"fs-uboot", 0x00000, 0x20000},
1349 {"firmware", 0x20000, 0xf30000},
1350 {"default-mac", 0xf50000, 0x00200},
1351 {"pin", 0xf50200, 0x00200},
1352 {"product-info", 0xf50400, 0x0fc00},
1353 {"soft-version", 0xf60000, 0x0b000},
1354 {"support-list", 0xf6b000, 0x04000},
1355 {"profile", 0xf70000, 0x04000},
1356 {"default-config", 0xf74000, 0x0b000},
1357 {"user-config", 0xf80000, 0x40000},
1358 {"partition-table", 0xfc0000, 0x10000},
1359 {"log", 0xfd0000, 0x20000},
1360 {"radio", 0xff0000, 0x10000},
1364 .first_sysupgrade_partition
= "os-image",
1365 .last_sysupgrade_partition
= "file-system"
1368 /** Firmware layout for the TL-WR902AC v1 */
1370 .id
= "TL-WR902AC-V1",
1374 "{product_name:TL-WR902AC,product_ver:1.0.0,special_id:45550000}\n"
1375 "{product_name:TL-WR902AC,product_ver:1.0.0,special_id:55530000}\n",
1376 .support_trail
= '\x00',
1380 384KB were moved from file-system to os-image
1381 in comparison to the stock image
1384 {"fs-uboot", 0x00000, 0x20000},
1385 {"firmware", 0x20000, 0x730000},
1386 {"default-mac", 0x750000, 0x00200},
1387 {"pin", 0x750200, 0x00200},
1388 {"product-info", 0x750400, 0x0fc00},
1389 {"soft-version", 0x760000, 0x0b000},
1390 {"support-list", 0x76b000, 0x04000},
1391 {"profile", 0x770000, 0x04000},
1392 {"default-config", 0x774000, 0x0b000},
1393 {"user-config", 0x780000, 0x40000},
1394 {"partition-table", 0x7c0000, 0x10000},
1395 {"log", 0x7d0000, 0x20000},
1396 {"radio", 0x7f0000, 0x10000},
1400 .first_sysupgrade_partition
= "os-image",
1401 .last_sysupgrade_partition
= "file-system",
1404 /** Firmware layout for the TL-WR942N V1 */
1410 "{product_name:TL-WR942N,product_ver:1.0.0,special_id:00000000}\r\n"
1411 "{product_name:TL-WR942N,product_ver:1.0.0,special_id:52550000}\r\n",
1412 .support_trail
= '\x00',
1416 {"fs-uboot", 0x00000, 0x20000},
1417 {"firmware", 0x20000, 0xe20000},
1418 {"default-mac", 0xe40000, 0x00200},
1419 {"pin", 0xe40200, 0x00200},
1420 {"product-info", 0xe40400, 0x0fc00},
1421 {"partition-table", 0xe50000, 0x10000},
1422 {"soft-version", 0xe60000, 0x10000},
1423 {"support-list", 0xe70000, 0x10000},
1424 {"profile", 0xe80000, 0x10000},
1425 {"default-config", 0xe90000, 0x10000},
1426 {"user-config", 0xea0000, 0x40000},
1427 {"qos-db", 0xee0000, 0x40000},
1428 {"certificate", 0xf20000, 0x10000},
1429 {"usb-config", 0xfb0000, 0x10000},
1430 {"log", 0xfc0000, 0x20000},
1431 {"radio-bk", 0xfe0000, 0x10000},
1432 {"radio", 0xff0000, 0x10000},
1436 .first_sysupgrade_partition
= "os-image",
1437 .last_sysupgrade_partition
= "file-system",
1440 /** Firmware layout for the RE305 v1 */
1446 "{product_name:RE305,product_ver:1.0.0,special_id:45550000}\n"
1447 "{product_name:RE305,product_ver:1.0.0,special_id:55530000}\n"
1448 "{product_name:RE305,product_ver:1.0.0,special_id:4a500000}\n"
1449 "{product_name:RE305,product_ver:1.0.0,special_id:42520000}\n"
1450 "{product_name:RE305,product_ver:1.0.0,special_id:4b520000}\n"
1451 "{product_name:RE305,product_ver:1.0.0,special_id:41550000}\n"
1452 "{product_name:RE305,product_ver:1.0.0,special_id:43410000}\n",
1453 .support_trail
= '\x00',
1457 {"fs-uboot", 0x00000, 0x20000},
1458 {"firmware", 0x20000, 0x5e0000},
1459 {"partition-table", 0x600000, 0x02000},
1460 {"default-mac", 0x610000, 0x00020},
1461 {"pin", 0x610100, 0x00020},
1462 {"product-info", 0x611100, 0x01000},
1463 {"soft-version", 0x620000, 0x01000},
1464 {"support-list", 0x621000, 0x01000},
1465 {"profile", 0x622000, 0x08000},
1466 {"user-config", 0x630000, 0x10000},
1467 {"default-config", 0x640000, 0x10000},
1468 {"radio", 0x7f0000, 0x10000},
1472 .first_sysupgrade_partition
= "os-image",
1473 .last_sysupgrade_partition
= "file-system"
1476 /** Firmware layout for the RE350 v1 */
1482 "{product_name:RE350,product_ver:1.0.0,special_id:45550000}\n"
1483 "{product_name:RE350,product_ver:1.0.0,special_id:00000000}\n"
1484 "{product_name:RE350,product_ver:1.0.0,special_id:41550000}\n"
1485 "{product_name:RE350,product_ver:1.0.0,special_id:55530000}\n"
1486 "{product_name:RE350,product_ver:1.0.0,special_id:43410000}\n"
1487 "{product_name:RE350,product_ver:1.0.0,special_id:4b520000}\n"
1488 "{product_name:RE350,product_ver:1.0.0,special_id:4a500000}\n",
1489 .support_trail
= '\x00',
1492 /** We're using a dynamic kernel/rootfs split here */
1494 {"fs-uboot", 0x00000, 0x20000},
1495 {"firmware", 0x20000, 0x5e0000},
1496 {"partition-table", 0x600000, 0x02000},
1497 {"default-mac", 0x610000, 0x00020},
1498 {"pin", 0x610100, 0x00020},
1499 {"product-info", 0x611100, 0x01000},
1500 {"soft-version", 0x620000, 0x01000},
1501 {"support-list", 0x621000, 0x01000},
1502 {"profile", 0x622000, 0x08000},
1503 {"user-config", 0x630000, 0x10000},
1504 {"default-config", 0x640000, 0x10000},
1505 {"radio", 0x7f0000, 0x10000},
1509 .first_sysupgrade_partition
= "os-image",
1510 .last_sysupgrade_partition
= "file-system"
1513 /** Firmware layout for the RE350K v1 */
1519 "{product_name:RE350K,product_ver:1.0.0,special_id:00000000,product_region:US}\n",
1520 .support_trail
= '\x00',
1523 /** We're using a dynamic kernel/rootfs split here */
1525 {"fs-uboot", 0x00000, 0x20000},
1526 {"firmware", 0x20000, 0xd70000},
1527 {"partition-table", 0xd90000, 0x02000},
1528 {"default-mac", 0xda0000, 0x00020},
1529 {"pin", 0xda0100, 0x00020},
1530 {"product-info", 0xda1100, 0x01000},
1531 {"soft-version", 0xdb0000, 0x01000},
1532 {"support-list", 0xdb1000, 0x01000},
1533 {"profile", 0xdb2000, 0x08000},
1534 {"user-config", 0xdc0000, 0x10000},
1535 {"default-config", 0xdd0000, 0x10000},
1536 {"device-id", 0xde0000, 0x00108},
1537 {"radio", 0xff0000, 0x10000},
1541 .first_sysupgrade_partition
= "os-image",
1542 .last_sysupgrade_partition
= "file-system"
1545 /** Firmware layout for the RE355 */
1551 "{product_name:RE355,product_ver:1.0.0,special_id:00000000}\r\n"
1552 "{product_name:RE355,product_ver:1.0.0,special_id:55530000}\r\n"
1553 "{product_name:RE355,product_ver:1.0.0,special_id:45550000}\r\n"
1554 "{product_name:RE355,product_ver:1.0.0,special_id:4A500000}\r\n"
1555 "{product_name:RE355,product_ver:1.0.0,special_id:43410000}\r\n"
1556 "{product_name:RE355,product_ver:1.0.0,special_id:41550000}\r\n"
1557 "{product_name:RE355,product_ver:1.0.0,special_id:4B520000}\r\n"
1558 "{product_name:RE355,product_ver:1.0.0,special_id:55534100}\r\n",
1559 .support_trail
= '\x00',
1562 /* We're using a dynamic kernel/rootfs split here */
1564 {"fs-uboot", 0x00000, 0x20000},
1565 {"firmware", 0x20000, 0x5e0000},
1566 {"partition-table", 0x600000, 0x02000},
1567 {"default-mac", 0x610000, 0x00020},
1568 {"pin", 0x610100, 0x00020},
1569 {"product-info", 0x611100, 0x01000},
1570 {"soft-version", 0x620000, 0x01000},
1571 {"support-list", 0x621000, 0x01000},
1572 {"profile", 0x622000, 0x08000},
1573 {"user-config", 0x630000, 0x10000},
1574 {"default-config", 0x640000, 0x10000},
1575 {"radio", 0x7f0000, 0x10000},
1579 .first_sysupgrade_partition
= "os-image",
1580 .last_sysupgrade_partition
= "file-system"
1583 /** Firmware layout for the RE450 */
1589 "{product_name:RE450,product_ver:1.0.0,special_id:00000000}\r\n"
1590 "{product_name:RE450,product_ver:1.0.0,special_id:55530000}\r\n"
1591 "{product_name:RE450,product_ver:1.0.0,special_id:45550000}\r\n"
1592 "{product_name:RE450,product_ver:1.0.0,special_id:4A500000}\r\n"
1593 "{product_name:RE450,product_ver:1.0.0,special_id:43410000}\r\n"
1594 "{product_name:RE450,product_ver:1.0.0,special_id:41550000}\r\n"
1595 "{product_name:RE450,product_ver:1.0.0,special_id:4B520000}\r\n"
1596 "{product_name:RE450,product_ver:1.0.0,special_id:55534100}\r\n",
1597 .support_trail
= '\x00',
1600 /** We're using a dynamic kernel/rootfs split here */
1602 {"fs-uboot", 0x00000, 0x20000},
1603 {"firmware", 0x20000, 0x5e0000},
1604 {"partition-table", 0x600000, 0x02000},
1605 {"default-mac", 0x610000, 0x00020},
1606 {"pin", 0x610100, 0x00020},
1607 {"product-info", 0x611100, 0x01000},
1608 {"soft-version", 0x620000, 0x01000},
1609 {"support-list", 0x621000, 0x01000},
1610 {"profile", 0x622000, 0x08000},
1611 {"user-config", 0x630000, 0x10000},
1612 {"default-config", 0x640000, 0x10000},
1613 {"radio", 0x7f0000, 0x10000},
1617 .first_sysupgrade_partition
= "os-image",
1618 .last_sysupgrade_partition
= "file-system"
1621 /** Firmware layout for the RE450 v2 */
1627 "{product_name:RE450,product_ver:2.0.0,special_id:00000000}\r\n"
1628 "{product_name:RE450,product_ver:2.0.0,special_id:55530000}\r\n"
1629 "{product_name:RE450,product_ver:2.0.0,special_id:45550000}\r\n"
1630 "{product_name:RE450,product_ver:2.0.0,special_id:4A500000}\r\n"
1631 "{product_name:RE450,product_ver:2.0.0,special_id:43410000}\r\n"
1632 "{product_name:RE450,product_ver:2.0.0,special_id:41550000}\r\n"
1633 "{product_name:RE450,product_ver:2.0.0,special_id:41530000}\r\n"
1634 "{product_name:RE450,product_ver:2.0.0,special_id:4B520000}\r\n"
1635 "{product_name:RE450,product_ver:2.0.0,special_id:42520000}\r\n",
1636 .support_trail
= '\x00',
1639 /* We're using a dynamic kernel/rootfs split here */
1641 {"fs-uboot", 0x00000, 0x20000},
1642 {"firmware", 0x20000, 0x5e0000},
1643 {"partition-table", 0x600000, 0x02000},
1644 {"default-mac", 0x610000, 0x00020},
1645 {"pin", 0x610100, 0x00020},
1646 {"product-info", 0x611100, 0x01000},
1647 {"soft-version", 0x620000, 0x01000},
1648 {"support-list", 0x621000, 0x01000},
1649 {"profile", 0x622000, 0x08000},
1650 {"user-config", 0x630000, 0x10000},
1651 {"default-config", 0x640000, 0x10000},
1652 {"radio", 0x7f0000, 0x10000},
1657 .first_sysupgrade_partition
= "os-image",
1658 .last_sysupgrade_partition
= "file-system"
1661 /** Firmware layout for the RE650 */
1667 "{product_name:RE650,product_ver:1.0.0,special_id:00000000}\r\n"
1668 "{product_name:RE650,product_ver:1.0.0,special_id:55530000}\r\n"
1669 "{product_name:RE650,product_ver:1.0.0,special_id:45550000}\r\n"
1670 "{product_name:RE650,product_ver:1.0.0,special_id:4A500000}\r\n"
1671 "{product_name:RE650,product_ver:1.0.0,special_id:43410000}\r\n"
1672 "{product_name:RE650,product_ver:1.0.0,special_id:41550000}\r\n"
1673 "{product_name:RE650,product_ver:1.0.0,special_id:41530000}\r\n",
1674 .support_trail
= '\x00',
1677 /* We're using a dynamic kernel/rootfs split here */
1679 {"fs-uboot", 0x00000, 0x20000},
1680 {"firmware", 0x20000, 0xde0000},
1681 {"partition-table", 0xe00000, 0x02000},
1682 {"default-mac", 0xe10000, 0x00020},
1683 {"pin", 0xe10100, 0x00020},
1684 {"product-info", 0xe11100, 0x01000},
1685 {"soft-version", 0xe20000, 0x01000},
1686 {"support-list", 0xe21000, 0x01000},
1687 {"profile", 0xe22000, 0x08000},
1688 {"user-config", 0xe30000, 0x10000},
1689 {"default-config", 0xe40000, 0x10000},
1690 {"radio", 0xff0000, 0x10000},
1694 .first_sysupgrade_partition
= "os-image",
1695 .last_sysupgrade_partition
= "file-system"
1701 #define error(_ret, _errno, _str, ...) \
1703 fprintf(stderr, _str ": %s\n", ## __VA_ARGS__, \
1704 strerror(_errno)); \
1710 /** Stores a uint32 as big endian */
1711 static inline void put32(uint8_t *buf
, uint32_t val
) {
1718 /** Allocates a new image partition */
1719 static struct image_partition_entry
alloc_image_partition(const char *name
, size_t len
) {
1720 struct image_partition_entry entry
= {name
, len
, malloc(len
)};
1722 error(1, errno
, "malloc");
1727 /** Frees an image partition */
1728 static void free_image_partition(struct image_partition_entry entry
) {
1732 static time_t source_date_epoch
= -1;
1733 static void set_source_date_epoch() {
1734 char *env
= getenv("SOURCE_DATE_EPOCH");
1738 source_date_epoch
= strtoull(env
, &endptr
, 10);
1739 if (errno
|| (endptr
&& *endptr
!= '\0')) {
1740 fprintf(stderr
, "Invalid SOURCE_DATE_EPOCH");
1746 /** Generates the partition-table partition */
1747 static struct image_partition_entry
make_partition_table(const struct flash_partition_entry
*p
) {
1748 struct image_partition_entry entry
= alloc_image_partition("partition-table", 0x800);
1750 char *s
= (char *)entry
.data
, *end
= (char *)(s
+entry
.size
);
1758 for (i
= 0; p
[i
].name
; i
++) {
1760 size_t w
= snprintf(s
, len
, "partition %s base 0x%05x size 0x%05x\n", p
[i
].name
, p
[i
].base
, p
[i
].size
);
1763 error(1, 0, "flash partition table overflow?");
1770 memset(s
, 0xff, end
-s
);
1776 /** Generates a binary-coded decimal representation of an integer in the range [0, 99] */
1777 static inline uint8_t bcd(uint8_t v
) {
1778 return 0x10 * (v
/10) + v
%10;
1782 /** Generates the soft-version partition */
1783 static struct image_partition_entry
make_soft_version(uint32_t rev
) {
1784 struct image_partition_entry entry
= alloc_image_partition("soft-version", sizeof(struct soft_version
));
1785 struct soft_version
*s
= (struct soft_version
*)entry
.data
;
1789 if (source_date_epoch
!= -1)
1790 t
= source_date_epoch
;
1791 else if (time(&t
) == (time_t)(-1))
1792 error(1, errno
, "time");
1794 struct tm
*tm
= localtime(&t
);
1796 s
->magic
= htonl(0x0000000c);
1800 s
->version_major
= 0;
1801 s
->version_minor
= 0;
1802 s
->version_patch
= 0;
1804 s
->year_hi
= bcd((1900+tm
->tm_year
)/100);
1805 s
->year_lo
= bcd(tm
->tm_year
%100);
1806 s
->month
= bcd(tm
->tm_mon
+1);
1807 s
->day
= bcd(tm
->tm_mday
);
1808 s
->rev
= htonl(rev
);
1815 static struct image_partition_entry
make_soft_version_from_string(const char *soft_ver
) {
1816 /** String length _including_ the terminating zero byte */
1817 uint32_t ver_len
= strlen(soft_ver
) + 1;
1818 /** Partition contains 64 bit header, the version string, and one additional null byte */
1819 size_t partition_len
= 2*sizeof(uint32_t) + ver_len
+ 1;
1820 struct image_partition_entry entry
= alloc_image_partition("soft-version", partition_len
);
1822 uint32_t *len
= (uint32_t *)entry
.data
;
1823 len
[0] = htonl(ver_len
);
1825 memcpy(&len
[2], soft_ver
, ver_len
);
1827 entry
.data
[partition_len
- 1] = 0;
1832 /** Generates the support-list partition */
1833 static struct image_partition_entry
make_support_list(struct device_info
*info
) {
1834 size_t len
= strlen(info
->support_list
);
1835 struct image_partition_entry entry
= alloc_image_partition("support-list", len
+ 9);
1837 put32(entry
.data
, len
);
1838 memset(entry
.data
+4, 0, 4);
1839 memcpy(entry
.data
+8, info
->support_list
, len
);
1840 entry
.data
[len
+8] = info
->support_trail
;
1845 /** Creates a new image partition with an arbitrary name from a file */
1846 static struct image_partition_entry
read_file(const char *part_name
, const char *filename
, bool add_jffs2_eof
, struct flash_partition_entry
*file_system_partition
) {
1847 struct stat statbuf
;
1849 if (stat(filename
, &statbuf
) < 0)
1850 error(1, errno
, "unable to stat file `%s'", filename
);
1852 size_t len
= statbuf
.st_size
;
1854 if (add_jffs2_eof
) {
1855 if (file_system_partition
)
1856 len
= ALIGN(len
+ file_system_partition
->base
, 0x10000) + sizeof(jffs2_eof_mark
) - file_system_partition
->base
;
1858 len
= ALIGN(len
, 0x10000) + sizeof(jffs2_eof_mark
);
1861 struct image_partition_entry entry
= alloc_image_partition(part_name
, len
);
1863 FILE *file
= fopen(filename
, "rb");
1865 error(1, errno
, "unable to open file `%s'", filename
);
1867 if (fread(entry
.data
, statbuf
.st_size
, 1, file
) != 1)
1868 error(1, errno
, "unable to read file `%s'", filename
);
1870 if (add_jffs2_eof
) {
1871 uint8_t *eof
= entry
.data
+ statbuf
.st_size
, *end
= entry
.data
+entry
.size
;
1873 memset(eof
, 0xff, end
- eof
- sizeof(jffs2_eof_mark
));
1874 memcpy(end
- sizeof(jffs2_eof_mark
), jffs2_eof_mark
, sizeof(jffs2_eof_mark
));
1882 /** Creates a new image partition from arbitrary data */
1883 static struct image_partition_entry
put_data(const char *part_name
, const char *datain
, size_t len
) {
1885 struct image_partition_entry entry
= alloc_image_partition(part_name
, len
);
1887 memcpy(entry
.data
, datain
, len
);
1893 Copies a list of image partitions into an image buffer and generates the image partition table while doing so
1895 Example image partition table:
1897 fwup-ptn partition-table base 0x00800 size 0x00800
1898 fwup-ptn os-image base 0x01000 size 0x113b45
1899 fwup-ptn file-system base 0x114b45 size 0x1d0004
1900 fwup-ptn support-list base 0x2e4b49 size 0x000d1
1902 Each line of the partition table is terminated with the bytes 09 0d 0a ("\t\r\n"),
1903 the end of the partition table is marked with a zero byte.
1905 The firmware image must contain at least the partition-table and support-list partitions
1906 to be accepted. There aren't any alignment constraints for the image partitions.
1908 The partition-table partition contains the actual flash layout; partitions
1909 from the image partition table are mapped to the corresponding flash partitions during
1910 the firmware upgrade. The support-list partition contains a list of devices supported by
1913 The base offsets in the firmware partition table are relative to the end
1914 of the vendor information block, so the partition-table partition will
1915 actually start at offset 0x1814 of the image.
1917 I think partition-table must be the first partition in the firmware image.
1919 static void put_partitions(uint8_t *buffer
, const struct flash_partition_entry
*flash_parts
, const struct image_partition_entry
*parts
) {
1921 char *image_pt
= (char *)buffer
, *end
= image_pt
+ 0x800;
1923 size_t base
= 0x800;
1924 for (i
= 0; parts
[i
].name
; i
++) {
1925 for (j
= 0; flash_parts
[j
].name
; j
++) {
1926 if (!strcmp(flash_parts
[j
].name
, parts
[i
].name
)) {
1927 if (parts
[i
].size
> flash_parts
[j
].size
)
1928 error(1, 0, "%s partition too big (more than %u bytes)", flash_parts
[j
].name
, (unsigned)flash_parts
[j
].size
);
1933 assert(flash_parts
[j
].name
);
1935 memcpy(buffer
+ base
, parts
[i
].data
, parts
[i
].size
);
1937 size_t len
= end
-image_pt
;
1938 size_t w
= snprintf(image_pt
, len
, "fwup-ptn %s base 0x%05x size 0x%05x\t\r\n", parts
[i
].name
, (unsigned)base
, (unsigned)parts
[i
].size
);
1941 error(1, 0, "image partition table overflow?");
1945 base
+= parts
[i
].size
;
1949 /** Generates and writes the image MD5 checksum */
1950 static void put_md5(uint8_t *md5
, uint8_t *buffer
, unsigned int len
) {
1954 MD5_Update(&ctx
, md5_salt
, (unsigned int)sizeof(md5_salt
));
1955 MD5_Update(&ctx
, buffer
, len
);
1956 MD5_Final(md5
, &ctx
);
1961 Generates the firmware image in factory format
1967 0000-0003 Image size (4 bytes, big endian)
1968 0004-0013 MD5 hash (hash of a 16 byte salt and the image data starting with byte 0x14)
1969 0014-0017 Vendor information length (without padding) (4 bytes, big endian)
1970 0018-1013 Vendor information (4092 bytes, padded with 0xff; there seem to be older
1971 (VxWorks-based) TP-LINK devices which use a smaller vendor information block)
1972 1014-1813 Image partition table (2048 bytes, padded with 0xff)
1973 1814-xxxx Firmware partitions
1975 static void * generate_factory_image(struct device_info
*info
, const struct image_partition_entry
*parts
, size_t *len
) {
1979 for (i
= 0; parts
[i
].name
; i
++)
1980 *len
+= parts
[i
].size
;
1982 uint8_t *image
= malloc(*len
);
1984 error(1, errno
, "malloc");
1986 memset(image
, 0xff, *len
);
1990 size_t vendor_len
= strlen(info
->vendor
);
1991 put32(image
+0x14, vendor_len
);
1992 memcpy(image
+0x18, info
->vendor
, vendor_len
);
1995 put_partitions(image
+ 0x1014, info
->partitions
, parts
);
1996 put_md5(image
+0x04, image
+0x14, *len
-0x14);
2002 Generates the firmware image in sysupgrade format
2004 This makes some assumptions about the provided flash and image partition tables and
2005 should be generalized when TP-LINK starts building its safeloader into hardware with
2006 different flash layouts.
2008 static void * generate_sysupgrade_image(struct device_info
*info
, const struct image_partition_entry
*image_parts
, size_t *len
) {
2010 size_t flash_first_partition_index
= 0;
2011 size_t flash_last_partition_index
= 0;
2012 const struct flash_partition_entry
*flash_first_partition
= NULL
;
2013 const struct flash_partition_entry
*flash_last_partition
= NULL
;
2014 const struct image_partition_entry
*image_last_partition
= NULL
;
2016 /** Find first and last partitions */
2017 for (i
= 0; info
->partitions
[i
].name
; i
++) {
2018 if (!strcmp(info
->partitions
[i
].name
, info
->first_sysupgrade_partition
)) {
2019 flash_first_partition
= &info
->partitions
[i
];
2020 flash_first_partition_index
= i
;
2021 } else if (!strcmp(info
->partitions
[i
].name
, info
->last_sysupgrade_partition
)) {
2022 flash_last_partition
= &info
->partitions
[i
];
2023 flash_last_partition_index
= i
;
2027 assert(flash_first_partition
&& flash_last_partition
);
2028 assert(flash_first_partition_index
< flash_last_partition_index
);
2030 /** Find last partition from image to calculate needed size */
2031 for (i
= 0; image_parts
[i
].name
; i
++) {
2032 if (!strcmp(image_parts
[i
].name
, info
->last_sysupgrade_partition
)) {
2033 image_last_partition
= &image_parts
[i
];
2038 assert(image_last_partition
);
2040 *len
= flash_last_partition
->base
- flash_first_partition
->base
+ image_last_partition
->size
;
2042 uint8_t *image
= malloc(*len
);
2044 error(1, errno
, "malloc");
2046 memset(image
, 0xff, *len
);
2048 for (i
= flash_first_partition_index
; i
<= flash_last_partition_index
; i
++) {
2049 for (j
= 0; image_parts
[j
].name
; j
++) {
2050 if (!strcmp(info
->partitions
[i
].name
, image_parts
[j
].name
)) {
2051 if (image_parts
[j
].size
> info
->partitions
[i
].size
)
2052 error(1, 0, "%s partition too big (more than %u bytes)", info
->partitions
[i
].name
, (unsigned)info
->partitions
[i
].size
);
2053 memcpy(image
+ info
->partitions
[i
].base
- flash_first_partition
->base
, image_parts
[j
].data
, image_parts
[j
].size
);
2057 assert(image_parts
[j
].name
);
2064 /** Generates an image according to a given layout and writes it to a file */
2065 static void build_image(const char *output
,
2066 const char *kernel_image
,
2067 const char *rootfs_image
,
2071 struct device_info
*info
) {
2075 struct image_partition_entry parts
[7] = {};
2077 struct flash_partition_entry
*firmware_partition
= NULL
;
2078 struct flash_partition_entry
*os_image_partition
= NULL
;
2079 struct flash_partition_entry
*file_system_partition
= NULL
;
2080 size_t firmware_partition_index
= 0;
2082 for (i
= 0; info
->partitions
[i
].name
; i
++) {
2083 if (!strcmp(info
->partitions
[i
].name
, "firmware"))
2085 firmware_partition
= &info
->partitions
[i
];
2086 firmware_partition_index
= i
;
2090 if (firmware_partition
)
2092 os_image_partition
= &info
->partitions
[firmware_partition_index
];
2093 file_system_partition
= &info
->partitions
[firmware_partition_index
+ 1];
2096 if (stat(kernel_image
, &kernel
) < 0)
2097 error(1, errno
, "unable to stat file `%s'", kernel_image
);
2099 if (kernel
.st_size
> firmware_partition
->size
)
2100 error(1, 0, "kernel overflowed firmware partition\n");
2102 for (i
= MAX_PARTITIONS
-1; i
>= firmware_partition_index
+ 1; i
--)
2103 info
->partitions
[i
+1] = info
->partitions
[i
];
2105 file_system_partition
->name
= "file-system";
2106 file_system_partition
->base
= firmware_partition
->base
+ kernel
.st_size
;
2108 /* Align partition start to erase blocks for factory images only */
2110 file_system_partition
->base
= ALIGN(firmware_partition
->base
+ kernel
.st_size
, 0x10000);
2112 file_system_partition
->size
= firmware_partition
->size
- file_system_partition
->base
;
2114 os_image_partition
->name
= "os-image";
2115 os_image_partition
->size
= kernel
.st_size
;
2118 parts
[0] = make_partition_table(info
->partitions
);
2120 parts
[1] = make_soft_version_from_string(info
->soft_ver
);
2122 parts
[1] = make_soft_version(rev
);
2124 parts
[2] = make_support_list(info
);
2125 parts
[3] = read_file("os-image", kernel_image
, false, NULL
);
2126 parts
[4] = read_file("file-system", rootfs_image
, add_jffs2_eof
, file_system_partition
);
2128 /* Some devices need the extra-para partition to accept the firmware */
2129 if (strcasecmp(info
->id
, "ARCHER-C2-V3") == 0 ||
2130 strcasecmp(info
->id
, "ARCHER-C25-V1") == 0 ||
2131 strcasecmp(info
->id
, "ARCHER-C59-V2") == 0 ||
2132 strcasecmp(info
->id
, "ARCHER-C60-V2") == 0 ||
2133 strcasecmp(info
->id
, "TLWR1043NV5") == 0) {
2134 const char mdat
[11] = {0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00};
2135 parts
[5] = put_data("extra-para", mdat
, 11);
2136 } else if (strcasecmp(info
->id
, "ARCHER-A7-V5") == 0 || strcasecmp(info
->id
, "ARCHER-C7-V4") == 0 || strcasecmp(info
->id
, "ARCHER-C7-V5") == 0) {
2137 const char mdat
[11] = {0x01, 0x00, 0x00, 0x02, 0x00, 0x00, 0xca, 0x00, 0x01, 0x00, 0x00};
2138 parts
[5] = put_data("extra-para", mdat
, 11);
2139 } else if (strcasecmp(info
->id
, "ARCHER-C6-V2") == 0) {
2140 const char mdat
[11] = {0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00};
2141 parts
[5] = put_data("extra-para", mdat
, 11);
2142 } else if (strcasecmp(info
->id
, "ARCHER-C6-V2-US") == 0) {
2143 const char mdat
[11] = {0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x00};
2144 parts
[5] = put_data("extra-para", mdat
, 11);
2150 image
= generate_sysupgrade_image(info
, parts
, &len
);
2152 image
= generate_factory_image(info
, parts
, &len
);
2154 FILE *file
= fopen(output
, "wb");
2156 error(1, errno
, "unable to open output file");
2158 if (fwrite(image
, len
, 1, file
) != 1)
2159 error(1, 0, "unable to write output file");
2165 for (i
= 0; parts
[i
].name
; i
++)
2166 free_image_partition(parts
[i
]);
2170 static void usage(const char *argv0
) {
2172 "Usage: %s [OPTIONS...]\n"
2175 " -h show this help\n"
2177 "Create a new image:\n"
2178 " -B <board> create image for the board specified with <board>\n"
2179 " -k <file> read kernel image from the file <file>\n"
2180 " -r <file> read rootfs image from the file <file>\n"
2181 " -o <file> write output to the file <file>\n"
2182 " -V <rev> sets the revision number to <rev>\n"
2183 " -j add jffs2 end-of-filesystem markers\n"
2184 " -S create sysupgrade instead of factory image\n"
2185 "Extract an old image:\n"
2186 " -x <file> extract all oem firmware partition\n"
2187 " -d <dir> destination to extract the firmware partition\n"
2188 " -z <file> convert an oem firmware into a sysupgade file. Use -o for output file\n",
2194 static struct device_info
*find_board(const char *id
)
2196 struct device_info
*board
= NULL
;
2198 for (board
= boards
; board
->id
!= NULL
; board
++)
2199 if (strcasecmp(id
, board
->id
) == 0)
2205 static int add_flash_partition(
2206 struct flash_partition_entry
*part_list
,
2213 /* check if the list has a free entry */
2214 for (ptr
= 0; ptr
< max_entries
; ptr
++, part_list
++) {
2215 if (part_list
->name
== NULL
&&
2216 part_list
->base
== 0 &&
2217 part_list
->size
== 0)
2221 if (ptr
== max_entries
) {
2222 error(1, 0, "No free flash part entry available.");
2225 part_list
->name
= calloc(1, strlen(name
) + 1);
2226 if (!part_list
->name
) {
2227 error(1, 0, "Unable to allocate memory");
2230 memcpy((char *)part_list
->name
, name
, strlen(name
));
2231 part_list
->base
= base
;
2232 part_list
->size
= size
;
2237 /** read the partition table into struct flash_partition_entry */
2238 static int read_partition_table(
2239 FILE *file
, long offset
,
2240 struct flash_partition_entry
*entries
, size_t max_entries
,
2245 const char *parthdr
= NULL
;
2246 const char *fwuphdr
= "fwup-ptn";
2247 const char *flashhdr
= "partition";
2249 /* TODO: search for the partition table */
2259 error(1, 0, "Invalid partition table");
2262 if (fseek(file
, offset
, SEEK_SET
) < 0)
2263 error(1, errno
, "Can not seek in the firmware");
2265 if (fread(buf
, 2048, 1, file
) != 1)
2266 error(1, errno
, "Can not read fwup-ptn from the firmware");
2270 /* look for the partition header */
2271 if (memcmp(buf
, parthdr
, strlen(parthdr
)) != 0) {
2272 fprintf(stderr
, "DEBUG: can not find fwuphdr\n");
2277 end
= buf
+ sizeof(buf
);
2278 while ((ptr
+ strlen(parthdr
)) < end
&&
2279 memcmp(ptr
, parthdr
, strlen(parthdr
)) == 0) {
2283 char name
[32] = { 0 };
2285 unsigned long base
= 0;
2286 unsigned long size
= 0;
2288 end_part
= memchr(ptr
, '\n', (end
- ptr
));
2289 if (end_part
== NULL
) {
2290 /* in theory this should never happen, because a partition always ends with 0x09, 0x0D, 0x0A */
2294 for (int i
= 0; i
<= 4; i
++) {
2295 if (end_part
<= ptr
)
2298 end_element
= memchr(ptr
, 0x20, (end_part
- ptr
));
2299 if (end_element
== NULL
) {
2300 error(1, errno
, "Ignoring the rest of the partition entries.");
2305 /* partition header */
2307 ptr
= end_element
+ 1;
2311 name_len
= (end_element
- ptr
) > 31 ? 31 : (end_element
- ptr
);
2312 strncpy(name
, ptr
, name_len
);
2313 name
[name_len
] = '\0';
2314 ptr
= end_element
+ 1;
2319 ptr
= end_element
+ 1;
2324 base
= strtoul(ptr
, NULL
, 16);
2325 ptr
= end_element
+ 1;
2330 ptr
= end_element
+ 1;
2331 /* actual size. The last element doesn't have a sepeartor */
2332 size
= strtoul(ptr
, NULL
, 16);
2333 /* the part ends with 0x09, 0x0d, 0x0a */
2335 add_flash_partition(entries
, max_entries
, name
, base
, size
);
2344 static void write_partition(
2346 size_t firmware_offset
,
2347 struct flash_partition_entry
*entry
,
2353 fseek(input_file
, entry
->base
+ firmware_offset
, SEEK_SET
);
2355 for (offset
= 0; sizeof(buf
) + offset
<= entry
->size
; offset
+= sizeof(buf
)) {
2356 if (fread(buf
, sizeof(buf
), 1, input_file
) != 1)
2357 error(1, errno
, "Can not read partition from input_file");
2359 if (fwrite(buf
, sizeof(buf
), 1, output_file
) != 1)
2360 error(1, errno
, "Can not write partition to output_file");
2362 /* write last chunk smaller than buffer */
2363 if (offset
< entry
->size
) {
2364 offset
= entry
->size
- offset
;
2365 if (fread(buf
, offset
, 1, input_file
) != 1)
2366 error(1, errno
, "Can not read partition from input_file");
2367 if (fwrite(buf
, offset
, 1, output_file
) != 1)
2368 error(1, errno
, "Can not write partition to output_file");
2372 static int extract_firmware_partition(FILE *input_file
, size_t firmware_offset
, struct flash_partition_entry
*entry
, const char *output_directory
)
2375 char output
[PATH_MAX
];
2377 snprintf(output
, PATH_MAX
, "%s/%s", output_directory
, entry
->name
);
2378 output_file
= fopen(output
, "wb+");
2379 if (output_file
== NULL
) {
2380 error(1, errno
, "Can not open output file %s", output
);
2383 write_partition(input_file
, firmware_offset
, entry
, output_file
);
2385 fclose(output_file
);
2390 /** extract all partitions from the firmware file */
2391 static int extract_firmware(const char *input
, const char *output_directory
)
2393 struct flash_partition_entry entries
[16] = { 0 };
2394 size_t max_entries
= 16;
2395 size_t firmware_offset
= 0x1014;
2398 struct stat statbuf
;
2400 /* check input file */
2401 if (stat(input
, &statbuf
)) {
2402 error(1, errno
, "Can not read input firmware %s", input
);
2405 /* check if output directory exists */
2406 if (stat(output_directory
, &statbuf
)) {
2407 error(1, errno
, "Failed to stat output directory %s", output_directory
);
2410 if ((statbuf
.st_mode
& S_IFMT
) != S_IFDIR
) {
2411 error(1, errno
, "Given output directory is not a directory %s", output_directory
);
2414 input_file
= fopen(input
, "rb");
2416 if (read_partition_table(input_file
, firmware_offset
, entries
, 16, 0) != 0) {
2417 error(1, 0, "Error can not read the partition table (fwup-ptn)");
2420 for (size_t i
= 0; i
< max_entries
; i
++) {
2421 if (entries
[i
].name
== NULL
&&
2422 entries
[i
].base
== 0 &&
2423 entries
[i
].size
== 0)
2426 extract_firmware_partition(input_file
, firmware_offset
, &entries
[i
], output_directory
);
2432 static struct flash_partition_entry
*find_partition(
2433 struct flash_partition_entry
*entries
, size_t max_entries
,
2434 const char *name
, const char *error_msg
)
2436 for (size_t i
= 0; i
< max_entries
; i
++, entries
++) {
2437 if (strcmp(entries
->name
, name
) == 0)
2441 error(1, 0, "%s", error_msg
);
2445 static void write_ff(FILE *output_file
, size_t size
)
2450 memset(buf
, 0xff, sizeof(buf
));
2452 for (offset
= 0; offset
+ sizeof(buf
) < size
; offset
+= sizeof(buf
)) {
2453 if (fwrite(buf
, sizeof(buf
), 1, output_file
) != 1)
2454 error(1, errno
, "Can not write 0xff to output_file");
2457 /* write last chunk smaller than buffer */
2458 if (offset
< size
) {
2459 offset
= size
- offset
;
2460 if (fwrite(buf
, offset
, 1, output_file
) != 1)
2461 error(1, errno
, "Can not write partition to output_file");
2465 static void convert_firmware(const char *input
, const char *output
)
2467 struct flash_partition_entry fwup
[MAX_PARTITIONS
] = { 0 };
2468 struct flash_partition_entry flash
[MAX_PARTITIONS
] = { 0 };
2469 struct flash_partition_entry
*fwup_os_image
= NULL
, *fwup_file_system
= NULL
;
2470 struct flash_partition_entry
*flash_os_image
= NULL
, *flash_file_system
= NULL
;
2471 struct flash_partition_entry
*fwup_partition_table
= NULL
;
2472 size_t firmware_offset
= 0x1014;
2473 FILE *input_file
, *output_file
;
2475 struct stat statbuf
;
2477 /* check input file */
2478 if (stat(input
, &statbuf
)) {
2479 error(1, errno
, "Can not read input firmware %s", input
);
2482 input_file
= fopen(input
, "rb");
2484 error(1, 0, "Can not open input firmware %s", input
);
2486 output_file
= fopen(output
, "wb");
2488 error(1, 0, "Can not open output firmware %s", output
);
2490 if (read_partition_table(input_file
, firmware_offset
, fwup
, MAX_PARTITIONS
, 0) != 0) {
2491 error(1, 0, "Error can not read the partition table (fwup-ptn)");
2494 fwup_os_image
= find_partition(fwup
, MAX_PARTITIONS
,
2495 "os-image", "Error can not find os-image partition (fwup)");
2496 fwup_file_system
= find_partition(fwup
, MAX_PARTITIONS
,
2497 "file-system", "Error can not find file-system partition (fwup)");
2498 fwup_partition_table
= find_partition(fwup
, MAX_PARTITIONS
,
2499 "partition-table", "Error can not find partition-table partition");
2501 /* the flash partition table has a 0x00000004 magic haeder */
2502 if (read_partition_table(input_file
, firmware_offset
+ fwup_partition_table
->base
+ 4, flash
, MAX_PARTITIONS
, 1) != 0)
2503 error(1, 0, "Error can not read the partition table (flash)");
2505 flash_os_image
= find_partition(flash
, MAX_PARTITIONS
,
2506 "os-image", "Error can not find os-image partition (flash)");
2507 flash_file_system
= find_partition(flash
, MAX_PARTITIONS
,
2508 "file-system", "Error can not find file-system partition (flash)");
2510 /* write os_image to 0x0 */
2511 write_partition(input_file
, firmware_offset
, fwup_os_image
, output_file
);
2512 write_ff(output_file
, flash_os_image
->size
- fwup_os_image
->size
);
2514 /* write file-system behind os_image */
2515 fseek(output_file
, flash_file_system
->base
- flash_os_image
->base
, SEEK_SET
);
2516 write_partition(input_file
, firmware_offset
, fwup_file_system
, output_file
);
2517 write_ff(output_file
, flash_file_system
->size
- fwup_file_system
->size
);
2519 fclose(output_file
);
2523 int main(int argc
, char *argv
[]) {
2524 const char *board
= NULL
, *kernel_image
= NULL
, *rootfs_image
= NULL
, *output
= NULL
;
2525 const char *extract_image
= NULL
, *output_directory
= NULL
, *convert_image
= NULL
;
2526 bool add_jffs2_eof
= false, sysupgrade
= false;
2528 struct device_info
*info
;
2529 set_source_date_epoch();
2534 c
= getopt(argc
, argv
, "B:k:r:o:V:jSh:x:d:z:");
2544 kernel_image
= optarg
;
2548 rootfs_image
= optarg
;
2556 sscanf(optarg
, "r%u", &rev
);
2560 add_jffs2_eof
= true;
2572 output_directory
= optarg
;
2576 extract_image
= optarg
;
2580 convert_image
= optarg
;
2589 if (extract_image
|| output_directory
) {
2591 error(1, 0, "No factory/oem image given via -x <file>. Output directory is only valid with -x");
2592 if (!output_directory
)
2593 error(1, 0, "Can not extract an image without output directory. Use -d <dir>");
2594 extract_firmware(extract_image
, output_directory
);
2595 } else if (convert_image
) {
2597 error(1, 0, "Can not convert a factory/oem image into sysupgrade image without output file. Use -o <file>");
2598 convert_firmware(convert_image
, output
);
2601 error(1, 0, "no board has been specified");
2603 error(1, 0, "no kernel image has been specified");
2605 error(1, 0, "no rootfs image has been specified");
2607 error(1, 0, "no output filename has been specified");
2609 info
= find_board(board
);
2612 error(1, 0, "unsupported board %s", board
);
2614 build_image(output
, kernel_image
, rootfs_image
, rev
, add_jffs2_eof
, sysupgrade
, info
);