2 Copyright (c) 2014, Matthias Schiffer <mschiffer@universe-factory.net>
5 Redistribution and use in source and binary forms, with or without
6 modification, are permitted provided that the following conditions are met:
8 1. Redistributions of source code must retain the above copyright notice,
9 this list of conditions and the following disclaimer.
10 2. Redistributions in binary form must reproduce the above copyright notice,
11 this list of conditions and the following disclaimer in the documentation
12 and/or other materials provided with the distribution.
14 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
15 AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16 IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
17 DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
18 FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19 DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
20 SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
21 CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
22 OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
23 OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
30 Image generation tool for the TP-LINK SafeLoader as seen on
31 TP-LINK Pharos devices (CPE210/220/510/520)
45 #include <arpa/inet.h>
47 #include <sys/types.h>
54 #define ALIGN(x,a) ({ typeof(a) __a = (a); (((x) + __a - 1) & ~(__a - 1)); })
57 #define MAX_PARTITIONS 32
59 /** An image partition table entry */
60 struct image_partition_entry
{
66 /** A flash partition table entry */
67 struct flash_partition_entry
{
73 /** Firmware layout description */
77 const char *support_list
;
80 struct flash_partition_entry partitions
[MAX_PARTITIONS
+1];
81 const char *first_sysupgrade_partition
;
82 const char *last_sysupgrade_partition
;
85 /** The content of the soft-version structure */
86 struct __attribute__((__packed__
)) soft_version
{
90 uint8_t version_major
;
91 uint8_t version_minor
;
92 uint8_t version_patch
;
102 static const uint8_t jffs2_eof_mark
[4] = {0xde, 0xad, 0xc0, 0xde};
106 Salt for the MD5 hash
108 Fortunately, TP-LINK seems to use the same salt for most devices which use
109 the new image format.
111 static const uint8_t md5_salt
[16] = {
112 0x7a, 0x2b, 0x15, 0xed,
113 0x9b, 0x98, 0x59, 0x6d,
114 0xe5, 0x04, 0xab, 0x44,
115 0xac, 0x2a, 0x9f, 0x4e,
119 /** Firmware layout table */
120 static struct device_info boards
[] = {
121 /** Firmware layout for the CPE210/220 V1 */
124 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
127 "CPE210(TP-LINK|UN|N300-2):1.0\r\n"
128 "CPE210(TP-LINK|UN|N300-2):1.1\r\n"
129 "CPE210(TP-LINK|US|N300-2):1.1\r\n"
130 "CPE210(TP-LINK|EU|N300-2):1.1\r\n"
131 "CPE220(TP-LINK|UN|N300-2):1.1\r\n"
132 "CPE220(TP-LINK|US|N300-2):1.1\r\n"
133 "CPE220(TP-LINK|EU|N300-2):1.1\r\n",
134 .support_trail
= '\xff',
138 {"fs-uboot", 0x00000, 0x20000},
139 {"partition-table", 0x20000, 0x02000},
140 {"default-mac", 0x30000, 0x00020},
141 {"product-info", 0x31100, 0x00100},
142 {"signature", 0x32000, 0x00400},
143 {"os-image", 0x40000, 0x200000},
144 {"file-system", 0x240000, 0x570000},
145 {"soft-version", 0x7b0000, 0x00100},
146 {"support-list", 0x7b1000, 0x00400},
147 {"user-config", 0x7c0000, 0x10000},
148 {"default-config", 0x7d0000, 0x10000},
149 {"log", 0x7e0000, 0x10000},
150 {"radio", 0x7f0000, 0x10000},
154 .first_sysupgrade_partition
= "os-image",
155 .last_sysupgrade_partition
= "support-list",
158 /** Firmware layout for the CPE210 V2 */
161 .vendor
= "CPE210(TP-LINK|UN|N300-2|00000000):2.0\r\n",
164 "CPE210(TP-LINK|EU|N300-2|00000000):2.0\r\n"
165 "CPE210(TP-LINK|EU|N300-2|45550000):2.0\r\n"
166 "CPE210(TP-LINK|EU|N300-2|55530000):2.0\r\n"
167 "CPE210(TP-LINK|UN|N300-2|00000000):2.0\r\n"
168 "CPE210(TP-LINK|UN|N300-2|45550000):2.0\r\n"
169 "CPE210(TP-LINK|UN|N300-2|55530000):2.0\r\n"
170 "CPE210(TP-LINK|US|N300-2|55530000):2.0\r\n"
171 "CPE210(TP-LINK|UN|N300-2):2.0\r\n"
172 "CPE210(TP-LINK|EU|N300-2):2.0\r\n"
173 "CPE210(TP-LINK|US|N300-2):2.0\r\n",
174 .support_trail
= '\xff',
178 {"fs-uboot", 0x00000, 0x20000},
179 {"partition-table", 0x20000, 0x02000},
180 {"default-mac", 0x30000, 0x00020},
181 {"product-info", 0x31100, 0x00100},
182 {"device-info", 0x31400, 0x00400},
183 {"signature", 0x32000, 0x00400},
184 {"device-id", 0x33000, 0x00100},
185 {"firmware", 0x40000, 0x770000},
186 {"soft-version", 0x7b0000, 0x00100},
187 {"support-list", 0x7b1000, 0x01000},
188 {"user-config", 0x7c0000, 0x10000},
189 {"default-config", 0x7d0000, 0x10000},
190 {"log", 0x7e0000, 0x10000},
191 {"radio", 0x7f0000, 0x10000},
195 .first_sysupgrade_partition
= "os-image",
196 .last_sysupgrade_partition
= "support-list",
199 /** Firmware layout for the CPE210 V3 */
202 .vendor
= "CPE210(TP-LINK|UN|N300-2|00000000):3.0\r\n",
205 "CPE210(TP-LINK|EU|N300-2|45550000):3.0\r\n"
206 "CPE210(TP-LINK|UN|N300-2|00000000):3.0\r\n"
207 "CPE210(TP-LINK|UN|N300-2):3.0\r\n"
208 "CPE210(TP-LINK|EU|N300-2):3.0\r\n",
209 .support_trail
= '\xff',
213 {"fs-uboot", 0x00000, 0x20000},
214 {"partition-table", 0x20000, 0x01000},
215 {"default-mac", 0x30000, 0x00020},
216 {"product-info", 0x31100, 0x00100},
217 {"device-info", 0x31400, 0x00400},
218 {"signature", 0x32000, 0x00400},
219 {"device-id", 0x33000, 0x00100},
220 {"firmware", 0x40000, 0x770000},
221 {"soft-version", 0x7b0000, 0x00100},
222 {"support-list", 0x7b1000, 0x01000},
223 {"user-config", 0x7c0000, 0x10000},
224 {"default-config", 0x7d0000, 0x10000},
225 {"log", 0x7e0000, 0x10000},
226 {"radio", 0x7f0000, 0x10000},
230 .first_sysupgrade_partition
= "os-image",
231 .last_sysupgrade_partition
= "support-list",
234 /** Firmware layout for the CPE220 V2 */
237 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
240 "CPE220(TP-LINK|EU|N300-2|00000000):2.0\r\n"
241 "CPE220(TP-LINK|EU|N300-2|45550000):2.0\r\n"
242 "CPE220(TP-LINK|EU|N300-2|55530000):2.0\r\n"
243 "CPE220(TP-LINK|UN|N300-2|00000000):2.0\r\n"
244 "CPE220(TP-LINK|UN|N300-2|45550000):2.0\r\n"
245 "CPE220(TP-LINK|UN|N300-2|55530000):2.0\r\n"
246 "CPE220(TP-LINK|US|N300-2|55530000):2.0\r\n"
247 "CPE220(TP-LINK|UN|N300-2):2.0\r\n"
248 "CPE220(TP-LINK|EU|N300-2):2.0\r\n"
249 "CPE220(TP-LINK|US|N300-2):2.0\r\n",
250 .support_trail
= '\xff',
254 {"fs-uboot", 0x00000, 0x20000},
255 {"partition-table", 0x20000, 0x02000},
256 {"default-mac", 0x30000, 0x00020},
257 {"product-info", 0x31100, 0x00100},
258 {"signature", 0x32000, 0x00400},
259 {"os-image", 0x40000, 0x200000},
260 {"file-system", 0x240000, 0x570000},
261 {"soft-version", 0x7b0000, 0x00100},
262 {"support-list", 0x7b1000, 0x00400},
263 {"user-config", 0x7c0000, 0x10000},
264 {"default-config", 0x7d0000, 0x10000},
265 {"log", 0x7e0000, 0x10000},
266 {"radio", 0x7f0000, 0x10000},
270 .first_sysupgrade_partition
= "os-image",
271 .last_sysupgrade_partition
= "support-list",
274 /** Firmware layout for the CPE220 V3 */
277 .vendor
= "CPE220(TP-LINK|UN|N300-2|00000000):3.0\r\n",
280 "CPE220(TP-LINK|EU|N300-2|00000000):3.0\r\n"
281 "CPE220(TP-LINK|EU|N300-2|45550000):3.0\r\n"
282 "CPE220(TP-LINK|EU|N300-2|55530000):3.0\r\n"
283 "CPE220(TP-LINK|UN|N300-2|00000000):3.0\r\n"
284 "CPE220(TP-LINK|UN|N300-2|45550000):3.0\r\n"
285 "CPE220(TP-LINK|UN|N300-2|55530000):3.0\r\n"
286 "CPE220(TP-LINK|US|N300-2|55530000):3.0\r\n"
287 "CPE220(TP-LINK|UN|N300-2):3.0\r\n"
288 "CPE220(TP-LINK|EU|N300-2):3.0\r\n"
289 "CPE220(TP-LINK|US|N300-2):3.0\r\n",
290 .support_trail
= '\xff',
294 {"fs-uboot", 0x00000, 0x20000},
295 {"partition-table", 0x20000, 0x02000},
296 {"default-mac", 0x30000, 0x00020},
297 {"product-info", 0x31100, 0x00100},
298 {"device-info", 0x31400, 0x00400},
299 {"signature", 0x32000, 0x00400},
300 {"device-id", 0x33000, 0x00100},
301 {"firmware", 0x40000, 0x770000},
302 {"soft-version", 0x7b0000, 0x00100},
303 {"support-list", 0x7b1000, 0x01000},
304 {"user-config", 0x7c0000, 0x10000},
305 {"default-config", 0x7d0000, 0x10000},
306 {"log", 0x7e0000, 0x10000},
307 {"radio", 0x7f0000, 0x10000},
311 .first_sysupgrade_partition
= "os-image",
312 .last_sysupgrade_partition
= "support-list",
315 /** Firmware layout for the CPE510/520 V1 */
318 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
321 "CPE510(TP-LINK|UN|N300-5):1.0\r\n"
322 "CPE510(TP-LINK|UN|N300-5):1.1\r\n"
323 "CPE510(TP-LINK|UN|N300-5):1.1\r\n"
324 "CPE510(TP-LINK|US|N300-5):1.1\r\n"
325 "CPE510(TP-LINK|EU|N300-5):1.1\r\n"
326 "CPE520(TP-LINK|UN|N300-5):1.1\r\n"
327 "CPE520(TP-LINK|US|N300-5):1.1\r\n"
328 "CPE520(TP-LINK|EU|N300-5):1.1\r\n",
329 .support_trail
= '\xff',
333 {"fs-uboot", 0x00000, 0x20000},
334 {"partition-table", 0x20000, 0x02000},
335 {"default-mac", 0x30000, 0x00020},
336 {"product-info", 0x31100, 0x00100},
337 {"signature", 0x32000, 0x00400},
338 {"os-image", 0x40000, 0x200000},
339 {"file-system", 0x240000, 0x570000},
340 {"soft-version", 0x7b0000, 0x00100},
341 {"support-list", 0x7b1000, 0x00400},
342 {"user-config", 0x7c0000, 0x10000},
343 {"default-config", 0x7d0000, 0x10000},
344 {"log", 0x7e0000, 0x10000},
345 {"radio", 0x7f0000, 0x10000},
349 .first_sysupgrade_partition
= "os-image",
350 .last_sysupgrade_partition
= "support-list",
353 /** Firmware layout for the CPE510 V2 */
356 .vendor
= "CPE510(TP-LINK|UN|N300-5):2.0\r\n",
359 "CPE510(TP-LINK|EU|N300-5|00000000):2.0\r\n"
360 "CPE510(TP-LINK|EU|N300-5|45550000):2.0\r\n"
361 "CPE510(TP-LINK|EU|N300-5|55530000):2.0\r\n"
362 "CPE510(TP-LINK|UN|N300-5|00000000):2.0\r\n"
363 "CPE510(TP-LINK|UN|N300-5|45550000):2.0\r\n"
364 "CPE510(TP-LINK|UN|N300-5|55530000):2.0\r\n"
365 "CPE510(TP-LINK|US|N300-5|00000000):2.0\r\n"
366 "CPE510(TP-LINK|US|N300-5|45550000):2.0\r\n"
367 "CPE510(TP-LINK|US|N300-5|55530000):2.0\r\n"
368 "CPE510(TP-LINK|UN|N300-5):2.0\r\n"
369 "CPE510(TP-LINK|EU|N300-5):2.0\r\n"
370 "CPE510(TP-LINK|US|N300-5):2.0\r\n",
371 .support_trail
= '\xff',
375 {"fs-uboot", 0x00000, 0x20000},
376 {"partition-table", 0x20000, 0x02000},
377 {"default-mac", 0x30000, 0x00020},
378 {"product-info", 0x31100, 0x00100},
379 {"signature", 0x32000, 0x00400},
380 {"os-image", 0x40000, 0x200000},
381 {"file-system", 0x240000, 0x570000},
382 {"soft-version", 0x7b0000, 0x00100},
383 {"support-list", 0x7b1000, 0x00400},
384 {"user-config", 0x7c0000, 0x10000},
385 {"default-config", 0x7d0000, 0x10000},
386 {"log", 0x7e0000, 0x10000},
387 {"radio", 0x7f0000, 0x10000},
391 .first_sysupgrade_partition
= "os-image",
392 .last_sysupgrade_partition
= "support-list",
395 /** Firmware layout for the CPE510 V3 */
398 .vendor
= "CPE510(TP-LINK|UN|N300-5):3.0\r\n",
401 "CPE510(TP-LINK|EU|N300-5|00000000):3.0\r\n"
402 "CPE510(TP-LINK|EU|N300-5|45550000):3.0\r\n"
403 "CPE510(TP-LINK|EU|N300-5|55530000):3.0\r\n"
404 "CPE510(TP-LINK|UN|N300-5|00000000):3.0\r\n"
405 "CPE510(TP-LINK|UN|N300-5|45550000):3.0\r\n"
406 "CPE510(TP-LINK|UN|N300-5|55530000):3.0\r\n"
407 "CPE510(TP-LINK|US|N300-5|00000000):3.0\r\n"
408 "CPE510(TP-LINK|US|N300-5|45550000):3.0\r\n"
409 "CPE510(TP-LINK|US|N300-5|55530000):3.0\r\n"
410 "CPE510(TP-LINK|UN|N300-5):3.0\r\n"
411 "CPE510(TP-LINK|EU|N300-5):3.0\r\n"
412 "CPE510(TP-LINK|US|N300-5):3.0\r\n",
413 .support_trail
= '\xff',
417 {"fs-uboot", 0x00000, 0x20000},
418 {"partition-table", 0x20000, 0x02000},
419 {"default-mac", 0x30000, 0x00020},
420 {"product-info", 0x31100, 0x00100},
421 {"signature", 0x32000, 0x00400},
422 {"os-image", 0x40000, 0x200000},
423 {"file-system", 0x240000, 0x570000},
424 {"soft-version", 0x7b0000, 0x00100},
425 {"support-list", 0x7b1000, 0x00400},
426 {"user-config", 0x7c0000, 0x10000},
427 {"default-config", 0x7d0000, 0x10000},
428 {"log", 0x7e0000, 0x10000},
429 {"radio", 0x7f0000, 0x10000},
433 .first_sysupgrade_partition
= "os-image",
434 .last_sysupgrade_partition
= "support-list",
437 /** Firmware layout for the CPE610V1 */
440 .vendor
= "CPE610(TP-LINK|UN|N300-5|00000000):1.0\r\n",
443 "CPE610(TP-LINK|EU|N300-5|00000000):1.0\r\n"
444 "CPE610(TP-LINK|EU|N300-5|45550000):1.0\r\n"
445 "CPE610(TP-LINK|EU|N300-5|55530000):1.0\r\n"
446 "CPE610(TP-LINK|UN|N300-5|00000000):1.0\r\n"
447 "CPE610(TP-LINK|UN|N300-5|45550000):1.0\r\n"
448 "CPE610(TP-LINK|UN|N300-5|55530000):1.0\r\n"
449 "CPE610(TP-LINK|US|N300-5|55530000):1.0\r\n"
450 "CPE610(TP-LINK|UN|N300-5):1.0\r\n"
451 "CPE610(TP-LINK|EU|N300-5):1.0\r\n"
452 "CPE610(TP-LINK|US|N300-5):1.0\r\n",
453 .support_trail
= '\xff',
457 {"fs-uboot", 0x00000, 0x20000},
458 {"partition-table", 0x20000, 0x02000},
459 {"default-mac", 0x30000, 0x00020},
460 {"product-info", 0x31100, 0x00100},
461 {"signature", 0x32000, 0x00400},
462 {"os-image", 0x40000, 0x200000},
463 {"file-system", 0x240000, 0x570000},
464 {"soft-version", 0x7b0000, 0x00100},
465 {"support-list", 0x7b1000, 0x00400},
466 {"user-config", 0x7c0000, 0x10000},
467 {"default-config", 0x7d0000, 0x10000},
468 {"log", 0x7e0000, 0x10000},
469 {"radio", 0x7f0000, 0x10000},
473 .first_sysupgrade_partition
= "os-image",
474 .last_sysupgrade_partition
= "support-list",
479 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
482 "WBS210(TP-LINK|UN|N300-2):1.20\r\n"
483 "WBS210(TP-LINK|US|N300-2):1.20\r\n"
484 "WBS210(TP-LINK|EU|N300-2):1.20\r\n",
485 .support_trail
= '\xff',
489 {"fs-uboot", 0x00000, 0x20000},
490 {"partition-table", 0x20000, 0x02000},
491 {"default-mac", 0x30000, 0x00020},
492 {"product-info", 0x31100, 0x00100},
493 {"signature", 0x32000, 0x00400},
494 {"os-image", 0x40000, 0x200000},
495 {"file-system", 0x240000, 0x570000},
496 {"soft-version", 0x7b0000, 0x00100},
497 {"support-list", 0x7b1000, 0x00400},
498 {"user-config", 0x7c0000, 0x10000},
499 {"default-config", 0x7d0000, 0x10000},
500 {"log", 0x7e0000, 0x10000},
501 {"radio", 0x7f0000, 0x10000},
505 .first_sysupgrade_partition
= "os-image",
506 .last_sysupgrade_partition
= "support-list",
511 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
514 "WBS210(TP-LINK|UN|N300-2|00000000):2.0\r\n"
515 "WBS210(TP-LINK|US|N300-2|55530000):2.0\r\n"
516 "WBS210(TP-LINK|EU|N300-2|45550000):2.0\r\n",
517 .support_trail
= '\xff',
521 {"fs-uboot", 0x00000, 0x20000},
522 {"partition-table", 0x20000, 0x02000},
523 {"default-mac", 0x30000, 0x00020},
524 {"product-info", 0x31100, 0x00100},
525 {"signature", 0x32000, 0x00400},
526 {"os-image", 0x40000, 0x200000},
527 {"file-system", 0x240000, 0x570000},
528 {"soft-version", 0x7b0000, 0x00100},
529 {"support-list", 0x7b1000, 0x00400},
530 {"user-config", 0x7c0000, 0x10000},
531 {"default-config", 0x7d0000, 0x10000},
532 {"log", 0x7e0000, 0x10000},
533 {"radio", 0x7f0000, 0x10000},
537 .first_sysupgrade_partition
= "os-image",
538 .last_sysupgrade_partition
= "support-list",
543 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
546 "WBS510(TP-LINK|UN|N300-5):1.20\r\n"
547 "WBS510(TP-LINK|US|N300-5):1.20\r\n"
548 "WBS510(TP-LINK|EU|N300-5):1.20\r\n"
549 "WBS510(TP-LINK|CA|N300-5):1.20\r\n",
550 .support_trail
= '\xff',
554 {"fs-uboot", 0x00000, 0x20000},
555 {"partition-table", 0x20000, 0x02000},
556 {"default-mac", 0x30000, 0x00020},
557 {"product-info", 0x31100, 0x00100},
558 {"signature", 0x32000, 0x00400},
559 {"os-image", 0x40000, 0x200000},
560 {"file-system", 0x240000, 0x570000},
561 {"soft-version", 0x7b0000, 0x00100},
562 {"support-list", 0x7b1000, 0x00400},
563 {"user-config", 0x7c0000, 0x10000},
564 {"default-config", 0x7d0000, 0x10000},
565 {"log", 0x7e0000, 0x10000},
566 {"radio", 0x7f0000, 0x10000},
570 .first_sysupgrade_partition
= "os-image",
571 .last_sysupgrade_partition
= "support-list",
576 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
579 "WBS510(TP-LINK|UN|N300-5|00000000):2.0\r\n"
580 "WBS510(TP-LINK|US|N300-5|55530000):2.0\r\n"
581 "WBS510(TP-LINK|EU|N300-5|45550000):2.0\r\n"
582 "WBS510(TP-LINK|CA|N300-5|43410000):2.0\r\n",
583 .support_trail
= '\xff',
587 {"fs-uboot", 0x00000, 0x20000},
588 {"partition-table", 0x20000, 0x02000},
589 {"default-mac", 0x30000, 0x00020},
590 {"product-info", 0x31100, 0x00100},
591 {"signature", 0x32000, 0x00400},
592 {"os-image", 0x40000, 0x200000},
593 {"file-system", 0x240000, 0x570000},
594 {"soft-version", 0x7b0000, 0x00100},
595 {"support-list", 0x7b1000, 0x00400},
596 {"user-config", 0x7c0000, 0x10000},
597 {"default-config", 0x7d0000, 0x10000},
598 {"log", 0x7e0000, 0x10000},
599 {"radio", 0x7f0000, 0x10000},
603 .first_sysupgrade_partition
= "os-image",
604 .last_sysupgrade_partition
= "support-list",
607 /** Firmware layout for the C2600 */
613 "{product_name:Archer C2600,product_ver:1.0.0,special_id:00000000}\r\n",
614 .support_trail
= '\x00',
618 We use a bigger os-image partition than the stock images (and thus
619 smaller file-system), as our kernel doesn't fit in the stock firmware's
620 2 MB os-image since kernel 4.14.
623 {"SBL1", 0x00000, 0x20000},
624 {"MIBIB", 0x20000, 0x20000},
625 {"SBL2", 0x40000, 0x20000},
626 {"SBL3", 0x60000, 0x30000},
627 {"DDRCONFIG", 0x90000, 0x10000},
628 {"SSD", 0xa0000, 0x10000},
629 {"TZ", 0xb0000, 0x30000},
630 {"RPM", 0xe0000, 0x20000},
631 {"fs-uboot", 0x100000, 0x70000},
632 {"uboot-env", 0x170000, 0x40000},
633 {"radio", 0x1b0000, 0x40000},
634 {"os-image", 0x1f0000, 0x400000}, /* Stock: base 0x1f0000 size 0x200000 */
635 {"file-system", 0x5f0000, 0x1900000}, /* Stock: base 0x3f0000 size 0x1b00000 */
636 {"default-mac", 0x1ef0000, 0x00200},
637 {"pin", 0x1ef0200, 0x00200},
638 {"product-info", 0x1ef0400, 0x0fc00},
639 {"partition-table", 0x1f00000, 0x10000},
640 {"soft-version", 0x1f10000, 0x10000},
641 {"support-list", 0x1f20000, 0x10000},
642 {"profile", 0x1f30000, 0x10000},
643 {"default-config", 0x1f40000, 0x10000},
644 {"user-config", 0x1f50000, 0x40000},
645 {"qos-db", 0x1f90000, 0x40000},
646 {"usb-config", 0x1fd0000, 0x10000},
647 {"log", 0x1fe0000, 0x20000},
651 .first_sysupgrade_partition
= "os-image",
652 .last_sysupgrade_partition
= "file-system"
655 /** Firmware layout for the A7-V5 */
657 .id
= "ARCHER-A7-V5",
660 "{product_name:Archer A7,product_ver:5.0.0,special_id:45550000}\n"
661 "{product_name:Archer A7,product_ver:5.0.0,special_id:55530000}\n"
662 "{product_name:Archer A7,product_ver:5.0.0,special_id:43410000}\n"
663 "{product_name:Archer A7,product_ver:5.0.0,special_id:4A500000}\n"
664 "{product_name:Archer A7,product_ver:5.0.0,special_id:54570000}\n",
665 .support_trail
= '\x00',
666 .soft_ver
= "soft_ver:1.0.0\n",
668 /* We're using a dynamic kernel/rootfs split here */
670 {"factory-boot", 0x00000, 0x20000},
671 {"fs-uboot", 0x20000, 0x20000},
672 {"firmware", 0x40000, 0xec0000}, /* Stock: name os-image base 0x40000 size 0x120000 */
673 /* Stock: name file-system base 0x160000 size 0xda0000 */
674 {"default-mac", 0xf40000, 0x00200},
675 {"pin", 0xf40200, 0x00200},
676 {"device-id", 0xf40400, 0x00100},
677 {"product-info", 0xf40500, 0x0fb00},
678 {"soft-version", 0xf50000, 0x00100},
679 {"extra-para", 0xf51000, 0x01000},
680 {"support-list", 0xf52000, 0x0a000},
681 {"profile", 0xf5c000, 0x04000},
682 {"default-config", 0xf60000, 0x10000},
683 {"user-config", 0xf70000, 0x40000},
684 {"certificate", 0xfb0000, 0x10000},
685 {"partition-table", 0xfc0000, 0x10000},
686 {"log", 0xfd0000, 0x20000},
687 {"radio", 0xff0000, 0x10000},
691 .first_sysupgrade_partition
= "os-image",
692 .last_sysupgrade_partition
= "file-system",
695 /** Firmware layout for the C2v3 */
697 .id
= "ARCHER-C2-V3",
700 "{product_name:ArcherC2,product_ver:3.0.0,special_id:00000000}\n"
701 "{product_name:ArcherC2,product_ver:3.0.0,special_id:55530000}\n"
702 "{product_name:ArcherC2,product_ver:3.0.0,special_id:45550000}\n",
703 .support_trail
= '\x00',
704 .soft_ver
= "soft_ver:3.0.1\n",
706 /** We're using a dynamic kernel/rootfs split here */
709 {"factory-boot", 0x00000, 0x20000},
710 {"fs-uboot", 0x20000, 0x10000},
711 {"firmware", 0x30000, 0x7a0000},
712 {"user-config", 0x7d0000, 0x04000},
713 {"default-mac", 0x7e0000, 0x00100},
714 {"device-id", 0x7e0100, 0x00100},
715 {"extra-para", 0x7e0200, 0x00100},
716 {"pin", 0x7e0300, 0x00100},
717 {"support-list", 0x7e0400, 0x00400},
718 {"soft-version", 0x7e0800, 0x00400},
719 {"product-info", 0x7e0c00, 0x01400},
720 {"partition-table", 0x7e2000, 0x01000},
721 {"profile", 0x7e3000, 0x01000},
722 {"default-config", 0x7e4000, 0x04000},
723 {"merge-config", 0x7ec000, 0x02000},
724 {"qos-db", 0x7ee000, 0x02000},
725 {"radio", 0x7f0000, 0x10000},
729 .first_sysupgrade_partition
= "os-image",
730 .last_sysupgrade_partition
= "file-system",
733 /** Firmware layout for the C25v1 */
735 .id
= "ARCHER-C25-V1",
738 "{product_name:ArcherC25,product_ver:1.0.0,special_id:00000000}\n"
739 "{product_name:ArcherC25,product_ver:1.0.0,special_id:55530000}\n"
740 "{product_name:ArcherC25,product_ver:1.0.0,special_id:45550000}\n",
741 .support_trail
= '\x00',
742 .soft_ver
= "soft_ver:1.0.0\n",
744 /* We're using a dynamic kernel/rootfs split here */
746 {"factory-boot", 0x00000, 0x20000},
747 {"fs-uboot", 0x20000, 0x10000},
748 {"firmware", 0x30000, 0x7a0000}, /* Stock: name os-image base 0x30000 size 0x100000 */
749 /* Stock: name file-system base 0x130000 size 0x6a0000 */
750 {"user-config", 0x7d0000, 0x04000},
751 {"default-mac", 0x7e0000, 0x00100},
752 {"device-id", 0x7e0100, 0x00100},
753 {"extra-para", 0x7e0200, 0x00100},
754 {"pin", 0x7e0300, 0x00100},
755 {"support-list", 0x7e0400, 0x00400},
756 {"soft-version", 0x7e0800, 0x00400},
757 {"product-info", 0x7e0c00, 0x01400},
758 {"partition-table", 0x7e2000, 0x01000},
759 {"profile", 0x7e3000, 0x01000},
760 {"default-config", 0x7e4000, 0x04000},
761 {"merge-config", 0x7ec000, 0x02000},
762 {"qos-db", 0x7ee000, 0x02000},
763 {"radio", 0x7f0000, 0x10000},
767 .first_sysupgrade_partition
= "os-image",
768 .last_sysupgrade_partition
= "file-system",
771 /** Firmware layout for the C58v1 */
773 .id
= "ARCHER-C58-V1",
777 "{product_name:Archer C58,product_ver:1.0.0,special_id:00000000}\r\n"
778 "{product_name:Archer C58,product_ver:1.0.0,special_id:45550000}\r\n"
779 "{product_name:Archer C58,product_ver:1.0.0,special_id:55530000}\r\n",
780 .support_trail
= '\x00',
781 .soft_ver
= "soft_ver:1.0.0\n",
784 {"fs-uboot", 0x00000, 0x10000},
785 {"default-mac", 0x10000, 0x00200},
786 {"pin", 0x10200, 0x00200},
787 {"product-info", 0x10400, 0x00100},
788 {"partition-table", 0x10500, 0x00800},
789 {"soft-version", 0x11300, 0x00200},
790 {"support-list", 0x11500, 0x00100},
791 {"device-id", 0x11600, 0x00100},
792 {"profile", 0x11700, 0x03900},
793 {"default-config", 0x15000, 0x04000},
794 {"user-config", 0x19000, 0x04000},
795 {"firmware", 0x20000, 0x7c8000},
796 {"certyficate", 0x7e8000, 0x08000},
797 {"radio", 0x7f0000, 0x10000},
801 .first_sysupgrade_partition
= "os-image",
802 .last_sysupgrade_partition
= "file-system",
805 /** Firmware layout for the C59v1 */
807 .id
= "ARCHER-C59-V1",
811 "{product_name:Archer C59,product_ver:1.0.0,special_id:00000000}\r\n"
812 "{product_name:Archer C59,product_ver:1.0.0,special_id:45550000}\r\n"
813 "{product_name:Archer C59,product_ver:1.0.0,special_id:52550000}\r\n"
814 "{product_name:Archer C59,product_ver:1.0.0,special_id:55530000}\r\n",
815 .support_trail
= '\x00',
816 .soft_ver
= "soft_ver:1.0.0\n",
818 /* We're using a dynamic kernel/rootfs split here */
820 {"fs-uboot", 0x00000, 0x10000},
821 {"default-mac", 0x10000, 0x00200},
822 {"pin", 0x10200, 0x00200},
823 {"device-id", 0x10400, 0x00100},
824 {"product-info", 0x10500, 0x0fb00},
825 {"firmware", 0x20000, 0xe30000},
826 {"partition-table", 0xe50000, 0x10000},
827 {"soft-version", 0xe60000, 0x10000},
828 {"support-list", 0xe70000, 0x10000},
829 {"profile", 0xe80000, 0x10000},
830 {"default-config", 0xe90000, 0x10000},
831 {"user-config", 0xea0000, 0x40000},
832 {"usb-config", 0xee0000, 0x10000},
833 {"certificate", 0xef0000, 0x10000},
834 {"qos-db", 0xf00000, 0x40000},
835 {"log", 0xfe0000, 0x10000},
836 {"radio", 0xff0000, 0x10000},
840 .first_sysupgrade_partition
= "os-image",
841 .last_sysupgrade_partition
= "file-system",
844 /** Firmware layout for the C59v2 */
846 .id
= "ARCHER-C59-V2",
850 "{product_name:Archer C59,product_ver:2.0.0,special_id:00000000}\r\n"
851 "{product_name:Archer C59,product_ver:2.0.0,special_id:45550000}\r\n"
852 "{product_name:Archer C59,product_ver:2.0.0,special_id:55530000}\r\n",
853 .support_trail
= '\x00',
854 .soft_ver
= "soft_ver:2.0.0 Build 20161206 rel.7303\n",
856 /** We're using a dynamic kernel/rootfs split here */
858 {"factory-boot", 0x00000, 0x20000},
859 {"fs-uboot", 0x20000, 0x10000},
860 {"default-mac", 0x30000, 0x00200},
861 {"pin", 0x30200, 0x00200},
862 {"device-id", 0x30400, 0x00100},
863 {"product-info", 0x30500, 0x0fb00},
864 {"firmware", 0x40000, 0xe10000},
865 {"partition-table", 0xe50000, 0x10000},
866 {"soft-version", 0xe60000, 0x10000},
867 {"support-list", 0xe70000, 0x10000},
868 {"profile", 0xe80000, 0x10000},
869 {"default-config", 0xe90000, 0x10000},
870 {"user-config", 0xea0000, 0x40000},
871 {"usb-config", 0xee0000, 0x10000},
872 {"certificate", 0xef0000, 0x10000},
873 {"extra-para", 0xf00000, 0x10000},
874 {"qos-db", 0xf10000, 0x30000},
875 {"log", 0xfe0000, 0x10000},
876 {"radio", 0xff0000, 0x10000},
880 .first_sysupgrade_partition
= "os-image",
881 .last_sysupgrade_partition
= "file-system",
884 /** Firmware layout for the Archer C6 v2 (EU/RU/JP) */
886 .id
= "ARCHER-C6-V2",
890 "{product_name:Archer C6,product_ver:2.0.0,special_id:45550000}\r\n"
891 "{product_name:Archer C6,product_ver:2.0.0,special_id:52550000}\r\n"
892 "{product_name:Archer C6,product_ver:2.0.0,special_id:4A500000}\r\n",
893 .support_trail
= '\x00',
894 .soft_ver
= "soft_ver:1.2.1\n",
897 {"fs-uboot", 0x00000, 0x20000},
898 {"default-mac", 0x20000, 0x00200},
899 {"pin", 0x20200, 0x00100},
900 {"product-info", 0x20300, 0x00200},
901 {"device-id", 0x20500, 0x0fb00},
902 {"firmware", 0x30000, 0x7a9400},
903 {"soft-version", 0x7d9400, 0x00100},
904 {"extra-para", 0x7d9500, 0x00100},
905 {"support-list", 0x7d9600, 0x00200},
906 {"profile", 0x7d9800, 0x03000},
907 {"default-config", 0x7dc800, 0x03000},
908 {"partition-table", 0x7df800, 0x00800},
909 {"user-config", 0x7e0000, 0x0c000},
910 {"certificate", 0x7ec000, 0x04000},
911 {"radio", 0x7f0000, 0x10000},
915 .first_sysupgrade_partition
= "os-image",
916 .last_sysupgrade_partition
= "file-system",
919 /** Firmware layout for the Archer C6 v2 (US) and A6 v2 (US/TW) */
921 .id
= "ARCHER-C6-V2-US",
925 "{product_name:Archer A6,product_ver:2.0.0,special_id:55530000}\n"
926 "{product_name:Archer A6,product_ver:2.0.0,special_id:54570000}\n"
927 "{product_name:Archer C6,product_ver:2.0.0,special_id:55530000}\n",
928 .support_trail
= '\x00',
929 .soft_ver
= "soft_ver:1.1.1\n",
932 {"factory-boot", 0x00000, 0x20000},
933 {"default-mac", 0x20000, 0x00200},
934 {"pin", 0x20200, 0x00100},
935 {"product-info", 0x20300, 0x00200},
936 {"device-id", 0x20500, 0x0fb00},
937 {"fs-uboot", 0x30000, 0x20000},
938 {"firmware", 0x50000, 0xf89400},
939 {"soft-version", 0xfd9400, 0x00100},
940 {"extra-para", 0xfd9500, 0x00100},
941 {"support-list", 0xfd9600, 0x00200},
942 {"profile", 0xfd9800, 0x03000},
943 {"default-config", 0xfdc800, 0x03000},
944 {"partition-table", 0xfdf800, 0x00800},
945 {"user-config", 0xfe0000, 0x0c000},
946 {"certificate", 0xfec000, 0x04000},
947 {"radio", 0xff0000, 0x10000},
950 .first_sysupgrade_partition
= "os-image",
951 .last_sysupgrade_partition
= "file-system",
954 /** Firmware layout for the C60v1 */
956 .id
= "ARCHER-C60-V1",
960 "{product_name:Archer C60,product_ver:1.0.0,special_id:00000000}\r\n"
961 "{product_name:Archer C60,product_ver:1.0.0,special_id:45550000}\r\n"
962 "{product_name:Archer C60,product_ver:1.0.0,special_id:55530000}\r\n",
963 .support_trail
= '\x00',
964 .soft_ver
= "soft_ver:1.0.0\n",
967 {"fs-uboot", 0x00000, 0x10000},
968 {"default-mac", 0x10000, 0x00200},
969 {"pin", 0x10200, 0x00200},
970 {"product-info", 0x10400, 0x00100},
971 {"partition-table", 0x10500, 0x00800},
972 {"soft-version", 0x11300, 0x00200},
973 {"support-list", 0x11500, 0x00100},
974 {"device-id", 0x11600, 0x00100},
975 {"profile", 0x11700, 0x03900},
976 {"default-config", 0x15000, 0x04000},
977 {"user-config", 0x19000, 0x04000},
978 {"firmware", 0x20000, 0x7c8000},
979 {"certyficate", 0x7e8000, 0x08000},
980 {"radio", 0x7f0000, 0x10000},
984 .first_sysupgrade_partition
= "os-image",
985 .last_sysupgrade_partition
= "file-system",
988 /** Firmware layout for the C60v2 */
990 .id
= "ARCHER-C60-V2",
994 "{product_name:Archer C60,product_ver:2.0.0,special_id:42520000}\r\n"
995 "{product_name:Archer C60,product_ver:2.0.0,special_id:45550000}\r\n"
996 "{product_name:Archer C60,product_ver:2.0.0,special_id:55530000}\r\n",
997 .support_trail
= '\x00',
998 .soft_ver
= "soft_ver:2.0.0\n",
1001 {"factory-boot", 0x00000, 0x1fb00},
1002 {"default-mac", 0x1fb00, 0x00200},
1003 {"pin", 0x1fd00, 0x00100},
1004 {"product-info", 0x1fe00, 0x00100},
1005 {"device-id", 0x1ff00, 0x00100},
1006 {"fs-uboot", 0x20000, 0x10000},
1007 {"firmware", 0x30000, 0x7a0000},
1008 {"soft-version", 0x7d9500, 0x00100},
1009 {"support-list", 0x7d9600, 0x00100},
1010 {"extra-para", 0x7d9700, 0x00100},
1011 {"profile", 0x7d9800, 0x03000},
1012 {"default-config", 0x7dc800, 0x03000},
1013 {"partition-table", 0x7df800, 0x00800},
1014 {"user-config", 0x7e0000, 0x0c000},
1015 {"certificate", 0x7ec000, 0x04000},
1016 {"radio", 0x7f0000, 0x10000},
1020 .first_sysupgrade_partition
= "os-image",
1021 .last_sysupgrade_partition
= "file-system",
1024 /** Firmware layout for the C60v3 */
1026 .id
= "ARCHER-C60-V3",
1030 "{product_name:Archer C60,product_ver:3.0.0,special_id:42520000}\r\n"
1031 "{product_name:Archer C60,product_ver:3.0.0,special_id:45550000}\r\n"
1032 "{product_name:Archer C60,product_ver:3.0.0,special_id:55530000}\r\n",
1033 .support_trail
= '\x00',
1034 .soft_ver
= "soft_ver:3.0.0\n",
1037 {"factory-boot", 0x00000, 0x1fb00},
1038 {"default-mac", 0x1fb00, 0x00200},
1039 {"pin", 0x1fd00, 0x00100},
1040 {"product-info", 0x1fe00, 0x00100},
1041 {"device-id", 0x1ff00, 0x00100},
1042 {"fs-uboot", 0x20000, 0x10000},
1043 {"firmware", 0x30000, 0x7a0000},
1044 {"soft-version", 0x7d9500, 0x00100},
1045 {"support-list", 0x7d9600, 0x00100},
1046 {"extra-para", 0x7d9700, 0x00100},
1047 {"profile", 0x7d9800, 0x03000},
1048 {"default-config", 0x7dc800, 0x03000},
1049 {"partition-table", 0x7df800, 0x00800},
1050 {"user-config", 0x7e0000, 0x0c000},
1051 {"certificate", 0x7ec000, 0x04000},
1052 {"radio", 0x7f0000, 0x10000},
1056 .first_sysupgrade_partition
= "os-image",
1057 .last_sysupgrade_partition
= "file-system",
1060 /** Firmware layout for the C5 */
1062 .id
= "ARCHER-C5-V2",
1066 "{product_name:ArcherC5,product_ver:2.0.0,special_id:00000000}\r\n"
1067 "{product_name:ArcherC5,product_ver:2.0.0,special_id:55530000}\r\n"
1068 "{product_name:ArcherC5,product_ver:2.0.0,special_id:4A500000}\r\n", /* JP version */
1069 .support_trail
= '\x00',
1073 {"fs-uboot", 0x00000, 0x40000},
1074 {"os-image", 0x40000, 0x200000},
1075 {"file-system", 0x240000, 0xc00000},
1076 {"default-mac", 0xe40000, 0x00200},
1077 {"pin", 0xe40200, 0x00200},
1078 {"product-info", 0xe40400, 0x00200},
1079 {"partition-table", 0xe50000, 0x10000},
1080 {"soft-version", 0xe60000, 0x00200},
1081 {"support-list", 0xe61000, 0x0f000},
1082 {"profile", 0xe70000, 0x10000},
1083 {"default-config", 0xe80000, 0x10000},
1084 {"user-config", 0xe90000, 0x50000},
1085 {"log", 0xee0000, 0x100000},
1086 {"radio_bk", 0xfe0000, 0x10000},
1087 {"radio", 0xff0000, 0x10000},
1091 .first_sysupgrade_partition
= "os-image",
1092 .last_sysupgrade_partition
= "file-system"
1095 /** Firmware layout for the C7 */
1097 .id
= "ARCHER-C7-V4",
1100 "{product_name:Archer C7,product_ver:4.0.0,special_id:00000000}\n"
1101 "{product_name:Archer C7,product_ver:4.0.0,special_id:41550000}\n"
1102 "{product_name:Archer C7,product_ver:4.0.0,special_id:45550000}\n"
1103 "{product_name:Archer C7,product_ver:4.0.0,special_id:4B520000}\n"
1104 "{product_name:Archer C7,product_ver:4.0.0,special_id:42520000}\n"
1105 "{product_name:Archer C7,product_ver:4.0.0,special_id:4A500000}\n"
1106 "{product_name:Archer C7,product_ver:4.0.0,special_id:52550000}\n"
1107 "{product_name:Archer C7,product_ver:4.0.0,special_id:54570000}\n"
1108 "{product_name:Archer C7,product_ver:4.0.0,special_id:55530000}\n"
1109 "{product_name:Archer C7,product_ver:4.0.0,special_id:43410000}\n",
1110 .support_trail
= '\x00',
1111 .soft_ver
= "soft_ver:1.0.0\n",
1113 /* We're using a dynamic kernel/rootfs split here */
1115 {"factory-boot", 0x00000, 0x20000},
1116 {"fs-uboot", 0x20000, 0x20000},
1117 {"firmware", 0x40000, 0xEC0000}, /* Stock: name os-image base 0x40000 size 0x120000 */
1118 /* Stock: name file-system base 0x160000 size 0xda0000 */
1119 {"default-mac", 0xf00000, 0x00200},
1120 {"pin", 0xf00200, 0x00200},
1121 {"device-id", 0xf00400, 0x00100},
1122 {"product-info", 0xf00500, 0x0fb00},
1123 {"soft-version", 0xf10000, 0x00100},
1124 {"extra-para", 0xf11000, 0x01000},
1125 {"support-list", 0xf12000, 0x0a000},
1126 {"profile", 0xf1c000, 0x04000},
1127 {"default-config", 0xf20000, 0x10000},
1128 {"user-config", 0xf30000, 0x40000},
1129 {"qos-db", 0xf70000, 0x40000},
1130 {"certificate", 0xfb0000, 0x10000},
1131 {"partition-table", 0xfc0000, 0x10000},
1132 {"log", 0xfd0000, 0x20000},
1133 {"radio", 0xff0000, 0x10000},
1137 .first_sysupgrade_partition
= "os-image",
1138 .last_sysupgrade_partition
= "file-system",
1141 /** Firmware layout for the C7 v5*/
1143 .id
= "ARCHER-C7-V5",
1146 "{product_name:Archer C7,product_ver:5.0.0,special_id:00000000}\n"
1147 "{product_name:Archer C7,product_ver:5.0.0,special_id:45550000}\n"
1148 "{product_name:Archer C7,product_ver:5.0.0,special_id:55530000}\n"
1149 "{product_name:Archer C7,product_ver:5.0.0,special_id:43410000}\n"
1150 "{product_name:Archer C7,product_ver:5.0.0,special_id:4A500000}\n"
1151 "{product_name:Archer C7,product_ver:5.0.0,special_id:54570000}\n"
1152 "{product_name:Archer C7,product_ver:5.0.0,special_id:52550000}\n"
1153 "{product_name:Archer C7,product_ver:5.0.0,special_id:4B520000}\n",
1155 .support_trail
= '\x00',
1156 .soft_ver
= "soft_ver:1.0.0\n",
1158 /* We're using a dynamic kernel/rootfs split here */
1160 {"factory-boot", 0x00000, 0x20000},
1161 {"fs-uboot", 0x20000, 0x20000},
1162 {"partition-table", 0x40000, 0x10000},
1163 {"radio", 0x50000, 0x10000},
1164 {"default-mac", 0x60000, 0x00200},
1165 {"pin", 0x60200, 0x00200},
1166 {"device-id", 0x60400, 0x00100},
1167 {"product-info", 0x60500, 0x0fb00},
1168 {"soft-version", 0x70000, 0x01000},
1169 {"extra-para", 0x71000, 0x01000},
1170 {"support-list", 0x72000, 0x0a000},
1171 {"profile", 0x7c000, 0x04000},
1172 {"user-config", 0x80000, 0x40000},
1175 {"firmware", 0xc0000, 0xf00000}, /* Stock: name os-image base 0xc0000 size 0x120000 */
1176 /* Stock: name file-system base 0x1e0000 size 0xde0000 */
1178 {"log", 0xfc0000, 0x20000},
1179 {"certificate", 0xfe0000, 0x10000},
1180 {"default-config", 0xff0000, 0x10000},
1185 .first_sysupgrade_partition
= "os-image",
1186 .last_sysupgrade_partition
= "file-system",
1189 /** Firmware layout for the C9 */
1195 "{product_name:ArcherC9,"
1196 "product_ver:1.0.0,"
1197 "special_id:00000000}\n",
1198 .support_trail
= '\x00',
1202 {"fs-uboot", 0x00000, 0x40000},
1203 {"os-image", 0x40000, 0x200000},
1204 {"file-system", 0x240000, 0xc00000},
1205 {"default-mac", 0xe40000, 0x00200},
1206 {"pin", 0xe40200, 0x00200},
1207 {"product-info", 0xe40400, 0x00200},
1208 {"partition-table", 0xe50000, 0x10000},
1209 {"soft-version", 0xe60000, 0x00200},
1210 {"support-list", 0xe61000, 0x0f000},
1211 {"profile", 0xe70000, 0x10000},
1212 {"default-config", 0xe80000, 0x10000},
1213 {"user-config", 0xe90000, 0x50000},
1214 {"log", 0xee0000, 0x100000},
1215 {"radio_bk", 0xfe0000, 0x10000},
1216 {"radio", 0xff0000, 0x10000},
1220 .first_sysupgrade_partition
= "os-image",
1221 .last_sysupgrade_partition
= "file-system"
1224 /** Firmware layout for the EAP120 */
1227 .vendor
= "EAP120(TP-LINK|UN|N300-2):1.0\r\n",
1230 "EAP120(TP-LINK|UN|N300-2):1.0\r\n",
1231 .support_trail
= '\xff',
1235 {"fs-uboot", 0x00000, 0x20000},
1236 {"partition-table", 0x20000, 0x02000},
1237 {"default-mac", 0x30000, 0x00020},
1238 {"support-list", 0x31000, 0x00100},
1239 {"product-info", 0x31100, 0x00100},
1240 {"soft-version", 0x32000, 0x00100},
1241 {"os-image", 0x40000, 0x180000},
1242 {"file-system", 0x1c0000, 0x600000},
1243 {"user-config", 0x7c0000, 0x10000},
1244 {"backup-config", 0x7d0000, 0x10000},
1245 {"log", 0x7e0000, 0x10000},
1246 {"radio", 0x7f0000, 0x10000},
1250 .first_sysupgrade_partition
= "os-image",
1251 .last_sysupgrade_partition
= "file-system"
1254 /** Firmware layout for the TL-WA850RE v2 */
1256 .id
= "TLWA850REV2",
1260 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:55530000}\n"
1261 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:00000000}\n"
1262 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:55534100}\n"
1263 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:45550000}\n"
1264 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:4B520000}\n"
1265 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:42520000}\n"
1266 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:4A500000}\n"
1267 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:43410000}\n"
1268 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:41550000}\n"
1269 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:52550000}\n",
1270 .support_trail
= '\x00',
1274 576KB were moved from file-system to os-image
1275 in comparison to the stock image
1278 {"fs-uboot", 0x00000, 0x20000},
1279 {"firmware", 0x20000, 0x390000},
1280 {"partition-table", 0x3b0000, 0x02000},
1281 {"default-mac", 0x3c0000, 0x00020},
1282 {"pin", 0x3c0100, 0x00020},
1283 {"product-info", 0x3c1000, 0x01000},
1284 {"soft-version", 0x3c2000, 0x00100},
1285 {"support-list", 0x3c3000, 0x01000},
1286 {"profile", 0x3c4000, 0x08000},
1287 {"user-config", 0x3d0000, 0x10000},
1288 {"default-config", 0x3e0000, 0x10000},
1289 {"radio", 0x3f0000, 0x10000},
1293 .first_sysupgrade_partition
= "os-image",
1294 .last_sysupgrade_partition
= "file-system"
1297 /** Firmware layout for the TL-WA855RE v1 */
1299 .id
= "TLWA855REV1",
1303 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:00000000}\n"
1304 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:55530000}\n"
1305 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:45550000}\n"
1306 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:4B520000}\n"
1307 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:42520000}\n"
1308 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:4A500000}\n"
1309 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:43410000}\n"
1310 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:41550000}\n"
1311 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:52550000}\n",
1312 .support_trail
= '\x00',
1316 {"fs-uboot", 0x00000, 0x20000},
1317 {"os-image", 0x20000, 0x150000},
1318 {"file-system", 0x170000, 0x240000},
1319 {"partition-table", 0x3b0000, 0x02000},
1320 {"default-mac", 0x3c0000, 0x00020},
1321 {"pin", 0x3c0100, 0x00020},
1322 {"product-info", 0x3c1000, 0x01000},
1323 {"soft-version", 0x3c2000, 0x00100},
1324 {"support-list", 0x3c3000, 0x01000},
1325 {"profile", 0x3c4000, 0x08000},
1326 {"user-config", 0x3d0000, 0x10000},
1327 {"default-config", 0x3e0000, 0x10000},
1328 {"radio", 0x3f0000, 0x10000},
1332 .first_sysupgrade_partition
= "os-image",
1333 .last_sysupgrade_partition
= "file-system"
1336 /** Firmware layout for the TL-WR1043 v5 */
1338 .id
= "TLWR1043NV5",
1342 "{product_name:TL-WR1043N,product_ver:5.0.0,special_id:45550000}\n"
1343 "{product_name:TL-WR1043N,product_ver:5.0.0,special_id:55530000}\n",
1344 .support_trail
= '\x00',
1345 .soft_ver
= "soft_ver:1.0.0\n",
1347 {"factory-boot", 0x00000, 0x20000},
1348 {"fs-uboot", 0x20000, 0x20000},
1349 {"firmware", 0x40000, 0xec0000},
1350 {"default-mac", 0xf00000, 0x00200},
1351 {"pin", 0xf00200, 0x00200},
1352 {"device-id", 0xf00400, 0x00100},
1353 {"product-info", 0xf00500, 0x0fb00},
1354 {"soft-version", 0xf10000, 0x01000},
1355 {"extra-para", 0xf11000, 0x01000},
1356 {"support-list", 0xf12000, 0x0a000},
1357 {"profile", 0xf1c000, 0x04000},
1358 {"default-config", 0xf20000, 0x10000},
1359 {"user-config", 0xf30000, 0x40000},
1360 {"qos-db", 0xf70000, 0x40000},
1361 {"certificate", 0xfb0000, 0x10000},
1362 {"partition-table", 0xfc0000, 0x10000},
1363 {"log", 0xfd0000, 0x20000},
1364 {"radio", 0xff0000, 0x10000},
1367 .first_sysupgrade_partition
= "os-image",
1368 .last_sysupgrade_partition
= "file-system"
1371 /** Firmware layout for the TL-WR1043 v4 */
1373 .id
= "TLWR1043NDV4",
1377 "{product_name:TL-WR1043ND,product_ver:4.0.0,special_id:45550000}\n",
1378 .support_trail
= '\x00',
1381 /* We're using a dynamic kernel/rootfs split here */
1383 {"fs-uboot", 0x00000, 0x20000},
1384 {"firmware", 0x20000, 0xf30000},
1385 {"default-mac", 0xf50000, 0x00200},
1386 {"pin", 0xf50200, 0x00200},
1387 {"product-info", 0xf50400, 0x0fc00},
1388 {"soft-version", 0xf60000, 0x0b000},
1389 {"support-list", 0xf6b000, 0x04000},
1390 {"profile", 0xf70000, 0x04000},
1391 {"default-config", 0xf74000, 0x0b000},
1392 {"user-config", 0xf80000, 0x40000},
1393 {"partition-table", 0xfc0000, 0x10000},
1394 {"log", 0xfd0000, 0x20000},
1395 {"radio", 0xff0000, 0x10000},
1399 .first_sysupgrade_partition
= "os-image",
1400 .last_sysupgrade_partition
= "file-system"
1403 /** Firmware layout for the TL-WR902AC v1 */
1405 .id
= "TL-WR902AC-V1",
1409 "{product_name:TL-WR902AC,product_ver:1.0.0,special_id:45550000}\n"
1410 "{product_name:TL-WR902AC,product_ver:1.0.0,special_id:55530000}\n",
1411 .support_trail
= '\x00',
1415 384KB were moved from file-system to os-image
1416 in comparison to the stock image
1419 {"fs-uboot", 0x00000, 0x20000},
1420 {"firmware", 0x20000, 0x730000},
1421 {"default-mac", 0x750000, 0x00200},
1422 {"pin", 0x750200, 0x00200},
1423 {"product-info", 0x750400, 0x0fc00},
1424 {"soft-version", 0x760000, 0x0b000},
1425 {"support-list", 0x76b000, 0x04000},
1426 {"profile", 0x770000, 0x04000},
1427 {"default-config", 0x774000, 0x0b000},
1428 {"user-config", 0x780000, 0x40000},
1429 {"partition-table", 0x7c0000, 0x10000},
1430 {"log", 0x7d0000, 0x20000},
1431 {"radio", 0x7f0000, 0x10000},
1435 .first_sysupgrade_partition
= "os-image",
1436 .last_sysupgrade_partition
= "file-system",
1439 /** Firmware layout for the TL-WR942N V1 */
1445 "{product_name:TL-WR942N,product_ver:1.0.0,special_id:00000000}\r\n"
1446 "{product_name:TL-WR942N,product_ver:1.0.0,special_id:52550000}\r\n",
1447 .support_trail
= '\x00',
1451 {"fs-uboot", 0x00000, 0x20000},
1452 {"firmware", 0x20000, 0xe20000},
1453 {"default-mac", 0xe40000, 0x00200},
1454 {"pin", 0xe40200, 0x00200},
1455 {"product-info", 0xe40400, 0x0fc00},
1456 {"partition-table", 0xe50000, 0x10000},
1457 {"soft-version", 0xe60000, 0x10000},
1458 {"support-list", 0xe70000, 0x10000},
1459 {"profile", 0xe80000, 0x10000},
1460 {"default-config", 0xe90000, 0x10000},
1461 {"user-config", 0xea0000, 0x40000},
1462 {"qos-db", 0xee0000, 0x40000},
1463 {"certificate", 0xf20000, 0x10000},
1464 {"usb-config", 0xfb0000, 0x10000},
1465 {"log", 0xfc0000, 0x20000},
1466 {"radio-bk", 0xfe0000, 0x10000},
1467 {"radio", 0xff0000, 0x10000},
1471 .first_sysupgrade_partition
= "os-image",
1472 .last_sysupgrade_partition
= "file-system",
1475 /** Firmware layout for the RE200 v2 */
1481 "{product_name:RE200,product_ver:2.0.0,special_id:00000000}\n"
1482 "{product_name:RE200,product_ver:2.0.0,special_id:41520000}\n"
1483 "{product_name:RE200,product_ver:2.0.0,special_id:41550000}\n"
1484 "{product_name:RE200,product_ver:2.0.0,special_id:42520000}\n"
1485 "{product_name:RE200,product_ver:2.0.0,special_id:43410000}\n"
1486 "{product_name:RE200,product_ver:2.0.0,special_id:45530000}\n"
1487 "{product_name:RE200,product_ver:2.0.0,special_id:45550000}\n"
1488 "{product_name:RE200,product_ver:2.0.0,special_id:49440000}\n"
1489 "{product_name:RE200,product_ver:2.0.0,special_id:4a500000}\n"
1490 "{product_name:RE200,product_ver:2.0.0,special_id:4b520000}\n"
1491 "{product_name:RE200,product_ver:2.0.0,special_id:52550000}\n"
1492 "{product_name:RE200,product_ver:2.0.0,special_id:54570000}\n"
1493 "{product_name:RE200,product_ver:2.0.0,special_id:55530000}\n",
1494 .support_trail
= '\x00',
1498 {"fs-uboot", 0x00000, 0x20000},
1499 {"firmware", 0x20000, 0x7a0000},
1500 {"partition-table", 0x7c0000, 0x02000},
1501 {"default-mac", 0x7c2000, 0x00020},
1502 {"pin", 0x7c2100, 0x00020},
1503 {"product-info", 0x7c3100, 0x01000},
1504 {"soft-version", 0x7c4200, 0x01000},
1505 {"support-list", 0x7c5200, 0x01000},
1506 {"profile", 0x7c6200, 0x08000},
1507 {"config-info", 0x7ce200, 0x00400},
1508 {"user-config", 0x7d0000, 0x10000},
1509 {"default-config", 0x7e0000, 0x10000},
1510 {"radio", 0x7f0000, 0x10000},
1514 .first_sysupgrade_partition
= "os-image",
1515 .last_sysupgrade_partition
= "file-system"
1518 /** Firmware layout for the RE305 v1 */
1524 "{product_name:RE305,product_ver:1.0.0,special_id:45550000}\n"
1525 "{product_name:RE305,product_ver:1.0.0,special_id:55530000}\n"
1526 "{product_name:RE305,product_ver:1.0.0,special_id:4a500000}\n"
1527 "{product_name:RE305,product_ver:1.0.0,special_id:42520000}\n"
1528 "{product_name:RE305,product_ver:1.0.0,special_id:4b520000}\n"
1529 "{product_name:RE305,product_ver:1.0.0,special_id:41550000}\n"
1530 "{product_name:RE305,product_ver:1.0.0,special_id:43410000}\n",
1531 .support_trail
= '\x00',
1535 {"fs-uboot", 0x00000, 0x20000},
1536 {"firmware", 0x20000, 0x5e0000},
1537 {"partition-table", 0x600000, 0x02000},
1538 {"default-mac", 0x610000, 0x00020},
1539 {"pin", 0x610100, 0x00020},
1540 {"product-info", 0x611100, 0x01000},
1541 {"soft-version", 0x620000, 0x01000},
1542 {"support-list", 0x621000, 0x01000},
1543 {"profile", 0x622000, 0x08000},
1544 {"user-config", 0x630000, 0x10000},
1545 {"default-config", 0x640000, 0x10000},
1546 {"radio", 0x7f0000, 0x10000},
1550 .first_sysupgrade_partition
= "os-image",
1551 .last_sysupgrade_partition
= "file-system"
1554 /** Firmware layout for the RE350 v1 */
1560 "{product_name:RE350,product_ver:1.0.0,special_id:45550000}\n"
1561 "{product_name:RE350,product_ver:1.0.0,special_id:00000000}\n"
1562 "{product_name:RE350,product_ver:1.0.0,special_id:41550000}\n"
1563 "{product_name:RE350,product_ver:1.0.0,special_id:55530000}\n"
1564 "{product_name:RE350,product_ver:1.0.0,special_id:43410000}\n"
1565 "{product_name:RE350,product_ver:1.0.0,special_id:4b520000}\n"
1566 "{product_name:RE350,product_ver:1.0.0,special_id:4a500000}\n",
1567 .support_trail
= '\x00',
1570 /** We're using a dynamic kernel/rootfs split here */
1572 {"fs-uboot", 0x00000, 0x20000},
1573 {"firmware", 0x20000, 0x5e0000},
1574 {"partition-table", 0x600000, 0x02000},
1575 {"default-mac", 0x610000, 0x00020},
1576 {"pin", 0x610100, 0x00020},
1577 {"product-info", 0x611100, 0x01000},
1578 {"soft-version", 0x620000, 0x01000},
1579 {"support-list", 0x621000, 0x01000},
1580 {"profile", 0x622000, 0x08000},
1581 {"user-config", 0x630000, 0x10000},
1582 {"default-config", 0x640000, 0x10000},
1583 {"radio", 0x7f0000, 0x10000},
1587 .first_sysupgrade_partition
= "os-image",
1588 .last_sysupgrade_partition
= "file-system"
1591 /** Firmware layout for the RE350K v1 */
1597 "{product_name:RE350K,product_ver:1.0.0,special_id:00000000,product_region:US}\n",
1598 .support_trail
= '\x00',
1601 /** We're using a dynamic kernel/rootfs split here */
1603 {"fs-uboot", 0x00000, 0x20000},
1604 {"firmware", 0x20000, 0xd70000},
1605 {"partition-table", 0xd90000, 0x02000},
1606 {"default-mac", 0xda0000, 0x00020},
1607 {"pin", 0xda0100, 0x00020},
1608 {"product-info", 0xda1100, 0x01000},
1609 {"soft-version", 0xdb0000, 0x01000},
1610 {"support-list", 0xdb1000, 0x01000},
1611 {"profile", 0xdb2000, 0x08000},
1612 {"user-config", 0xdc0000, 0x10000},
1613 {"default-config", 0xdd0000, 0x10000},
1614 {"device-id", 0xde0000, 0x00108},
1615 {"radio", 0xff0000, 0x10000},
1619 .first_sysupgrade_partition
= "os-image",
1620 .last_sysupgrade_partition
= "file-system"
1623 /** Firmware layout for the RE355 */
1629 "{product_name:RE355,product_ver:1.0.0,special_id:00000000}\r\n"
1630 "{product_name:RE355,product_ver:1.0.0,special_id:55530000}\r\n"
1631 "{product_name:RE355,product_ver:1.0.0,special_id:45550000}\r\n"
1632 "{product_name:RE355,product_ver:1.0.0,special_id:4A500000}\r\n"
1633 "{product_name:RE355,product_ver:1.0.0,special_id:43410000}\r\n"
1634 "{product_name:RE355,product_ver:1.0.0,special_id:41550000}\r\n"
1635 "{product_name:RE355,product_ver:1.0.0,special_id:4B520000}\r\n"
1636 "{product_name:RE355,product_ver:1.0.0,special_id:55534100}\r\n",
1637 .support_trail
= '\x00',
1640 /* We're using a dynamic kernel/rootfs split here */
1642 {"fs-uboot", 0x00000, 0x20000},
1643 {"firmware", 0x20000, 0x5e0000},
1644 {"partition-table", 0x600000, 0x02000},
1645 {"default-mac", 0x610000, 0x00020},
1646 {"pin", 0x610100, 0x00020},
1647 {"product-info", 0x611100, 0x01000},
1648 {"soft-version", 0x620000, 0x01000},
1649 {"support-list", 0x621000, 0x01000},
1650 {"profile", 0x622000, 0x08000},
1651 {"user-config", 0x630000, 0x10000},
1652 {"default-config", 0x640000, 0x10000},
1653 {"radio", 0x7f0000, 0x10000},
1657 .first_sysupgrade_partition
= "os-image",
1658 .last_sysupgrade_partition
= "file-system"
1661 /** Firmware layout for the RE450 */
1667 "{product_name:RE450,product_ver:1.0.0,special_id:00000000}\r\n"
1668 "{product_name:RE450,product_ver:1.0.0,special_id:55530000}\r\n"
1669 "{product_name:RE450,product_ver:1.0.0,special_id:45550000}\r\n"
1670 "{product_name:RE450,product_ver:1.0.0,special_id:4A500000}\r\n"
1671 "{product_name:RE450,product_ver:1.0.0,special_id:43410000}\r\n"
1672 "{product_name:RE450,product_ver:1.0.0,special_id:41550000}\r\n"
1673 "{product_name:RE450,product_ver:1.0.0,special_id:4B520000}\r\n"
1674 "{product_name:RE450,product_ver:1.0.0,special_id:55534100}\r\n",
1675 .support_trail
= '\x00',
1678 /** We're using a dynamic kernel/rootfs split here */
1680 {"fs-uboot", 0x00000, 0x20000},
1681 {"firmware", 0x20000, 0x5e0000},
1682 {"partition-table", 0x600000, 0x02000},
1683 {"default-mac", 0x610000, 0x00020},
1684 {"pin", 0x610100, 0x00020},
1685 {"product-info", 0x611100, 0x01000},
1686 {"soft-version", 0x620000, 0x01000},
1687 {"support-list", 0x621000, 0x01000},
1688 {"profile", 0x622000, 0x08000},
1689 {"user-config", 0x630000, 0x10000},
1690 {"default-config", 0x640000, 0x10000},
1691 {"radio", 0x7f0000, 0x10000},
1695 .first_sysupgrade_partition
= "os-image",
1696 .last_sysupgrade_partition
= "file-system"
1699 /** Firmware layout for the RE450 v2 */
1705 "{product_name:RE450,product_ver:2.0.0,special_id:00000000}\r\n"
1706 "{product_name:RE450,product_ver:2.0.0,special_id:55530000}\r\n"
1707 "{product_name:RE450,product_ver:2.0.0,special_id:45550000}\r\n"
1708 "{product_name:RE450,product_ver:2.0.0,special_id:4A500000}\r\n"
1709 "{product_name:RE450,product_ver:2.0.0,special_id:43410000}\r\n"
1710 "{product_name:RE450,product_ver:2.0.0,special_id:41550000}\r\n"
1711 "{product_name:RE450,product_ver:2.0.0,special_id:41530000}\r\n"
1712 "{product_name:RE450,product_ver:2.0.0,special_id:4B520000}\r\n"
1713 "{product_name:RE450,product_ver:2.0.0,special_id:42520000}\r\n",
1714 .support_trail
= '\x00',
1717 /* We're using a dynamic kernel/rootfs split here */
1719 {"fs-uboot", 0x00000, 0x20000},
1720 {"firmware", 0x20000, 0x5e0000},
1721 {"partition-table", 0x600000, 0x02000},
1722 {"default-mac", 0x610000, 0x00020},
1723 {"pin", 0x610100, 0x00020},
1724 {"product-info", 0x611100, 0x01000},
1725 {"soft-version", 0x620000, 0x01000},
1726 {"support-list", 0x621000, 0x01000},
1727 {"profile", 0x622000, 0x08000},
1728 {"user-config", 0x630000, 0x10000},
1729 {"default-config", 0x640000, 0x10000},
1730 {"radio", 0x7f0000, 0x10000},
1734 .first_sysupgrade_partition
= "os-image",
1735 .last_sysupgrade_partition
= "file-system"
1738 /** Firmware layout for the RE450 v3 */
1744 "{product_name:RE450,product_ver:3.0.0,special_id:00000000}\r\n"
1745 "{product_name:RE450,product_ver:3.0.0,special_id:55530000}\r\n"
1746 "{product_name:RE450,product_ver:3.0.0,special_id:45550000}\r\n"
1747 "{product_name:RE450,product_ver:3.0.0,special_id:4A500000}\r\n"
1748 "{product_name:RE450,product_ver:3.0.0,special_id:43410000}\r\n"
1749 "{product_name:RE450,product_ver:3.0.0,special_id:41550000}\r\n"
1750 "{product_name:RE450,product_ver:3.0.0,special_id:41530000}\r\n"
1751 "{product_name:RE450,product_ver:3.0.0,special_id:4B520000}\r\n"
1752 "{product_name:RE450,product_ver:3.0.0,special_id:42520000}\r\n",
1753 .support_trail
= '\x00',
1756 /* We're using a dynamic kernel/rootfs split here */
1758 {"fs-uboot", 0x00000, 0x20000},
1759 {"default-mac", 0x20000, 0x00020},
1760 {"pin", 0x20020, 0x00020},
1761 {"product-info", 0x21000, 0x01000},
1762 {"partition-table", 0x22000, 0x02000},
1763 {"soft-version", 0x24000, 0x01000},
1764 {"support-list", 0x25000, 0x01000},
1765 {"profile", 0x26000, 0x08000},
1766 {"user-config", 0x2e000, 0x10000},
1767 {"default-config", 0x3e000, 0x10000},
1768 {"config-info", 0x4e000, 0x00400},
1769 {"firmware", 0x50000, 0x7a0000},
1770 {"radio", 0x7f0000, 0x10000},
1774 .first_sysupgrade_partition
= "os-image",
1775 .last_sysupgrade_partition
= "file-system"
1778 /** Firmware layout for the RE650 */
1784 "{product_name:RE650,product_ver:1.0.0,special_id:00000000}\r\n"
1785 "{product_name:RE650,product_ver:1.0.0,special_id:55530000}\r\n"
1786 "{product_name:RE650,product_ver:1.0.0,special_id:45550000}\r\n"
1787 "{product_name:RE650,product_ver:1.0.0,special_id:4A500000}\r\n"
1788 "{product_name:RE650,product_ver:1.0.0,special_id:43410000}\r\n"
1789 "{product_name:RE650,product_ver:1.0.0,special_id:41550000}\r\n"
1790 "{product_name:RE650,product_ver:1.0.0,special_id:41530000}\r\n",
1791 .support_trail
= '\x00',
1794 /* We're using a dynamic kernel/rootfs split here */
1796 {"fs-uboot", 0x00000, 0x20000},
1797 {"firmware", 0x20000, 0xde0000},
1798 {"partition-table", 0xe00000, 0x02000},
1799 {"default-mac", 0xe10000, 0x00020},
1800 {"pin", 0xe10100, 0x00020},
1801 {"product-info", 0xe11100, 0x01000},
1802 {"soft-version", 0xe20000, 0x01000},
1803 {"support-list", 0xe21000, 0x01000},
1804 {"profile", 0xe22000, 0x08000},
1805 {"user-config", 0xe30000, 0x10000},
1806 {"default-config", 0xe40000, 0x10000},
1807 {"radio", 0xff0000, 0x10000},
1811 .first_sysupgrade_partition
= "os-image",
1812 .last_sysupgrade_partition
= "file-system"
1818 #define error(_ret, _errno, _str, ...) \
1820 fprintf(stderr, _str ": %s\n", ## __VA_ARGS__, \
1821 strerror(_errno)); \
1827 /** Stores a uint32 as big endian */
1828 static inline void put32(uint8_t *buf
, uint32_t val
) {
1835 /** Allocates a new image partition */
1836 static struct image_partition_entry
alloc_image_partition(const char *name
, size_t len
) {
1837 struct image_partition_entry entry
= {name
, len
, malloc(len
)};
1839 error(1, errno
, "malloc");
1844 /** Frees an image partition */
1845 static void free_image_partition(struct image_partition_entry entry
) {
1849 static time_t source_date_epoch
= -1;
1850 static void set_source_date_epoch() {
1851 char *env
= getenv("SOURCE_DATE_EPOCH");
1855 source_date_epoch
= strtoull(env
, &endptr
, 10);
1856 if (errno
|| (endptr
&& *endptr
!= '\0')) {
1857 fprintf(stderr
, "Invalid SOURCE_DATE_EPOCH");
1863 /** Generates the partition-table partition */
1864 static struct image_partition_entry
make_partition_table(const struct flash_partition_entry
*p
) {
1865 struct image_partition_entry entry
= alloc_image_partition("partition-table", 0x800);
1867 char *s
= (char *)entry
.data
, *end
= (char *)(s
+entry
.size
);
1875 for (i
= 0; p
[i
].name
; i
++) {
1877 size_t w
= snprintf(s
, len
, "partition %s base 0x%05x size 0x%05x\n", p
[i
].name
, p
[i
].base
, p
[i
].size
);
1880 error(1, 0, "flash partition table overflow?");
1887 memset(s
, 0xff, end
-s
);
1893 /** Generates a binary-coded decimal representation of an integer in the range [0, 99] */
1894 static inline uint8_t bcd(uint8_t v
) {
1895 return 0x10 * (v
/10) + v
%10;
1899 /** Generates the soft-version partition */
1900 static struct image_partition_entry
make_soft_version(uint32_t rev
) {
1901 struct image_partition_entry entry
= alloc_image_partition("soft-version", sizeof(struct soft_version
));
1902 struct soft_version
*s
= (struct soft_version
*)entry
.data
;
1906 if (source_date_epoch
!= -1)
1907 t
= source_date_epoch
;
1908 else if (time(&t
) == (time_t)(-1))
1909 error(1, errno
, "time");
1911 struct tm
*tm
= localtime(&t
);
1913 s
->magic
= htonl(0x0000000c);
1917 s
->version_major
= 0;
1918 s
->version_minor
= 0;
1919 s
->version_patch
= 0;
1921 s
->year_hi
= bcd((1900+tm
->tm_year
)/100);
1922 s
->year_lo
= bcd(tm
->tm_year
%100);
1923 s
->month
= bcd(tm
->tm_mon
+1);
1924 s
->day
= bcd(tm
->tm_mday
);
1925 s
->rev
= htonl(rev
);
1932 static struct image_partition_entry
make_soft_version_from_string(const char *soft_ver
) {
1933 /** String length _including_ the terminating zero byte */
1934 uint32_t ver_len
= strlen(soft_ver
) + 1;
1935 /** Partition contains 64 bit header, the version string, and one additional null byte */
1936 size_t partition_len
= 2*sizeof(uint32_t) + ver_len
+ 1;
1937 struct image_partition_entry entry
= alloc_image_partition("soft-version", partition_len
);
1939 uint32_t *len
= (uint32_t *)entry
.data
;
1940 len
[0] = htonl(ver_len
);
1942 memcpy(&len
[2], soft_ver
, ver_len
);
1944 entry
.data
[partition_len
- 1] = 0;
1949 /** Generates the support-list partition */
1950 static struct image_partition_entry
make_support_list(struct device_info
*info
) {
1951 size_t len
= strlen(info
->support_list
);
1952 struct image_partition_entry entry
= alloc_image_partition("support-list", len
+ 9);
1954 put32(entry
.data
, len
);
1955 memset(entry
.data
+4, 0, 4);
1956 memcpy(entry
.data
+8, info
->support_list
, len
);
1957 entry
.data
[len
+8] = info
->support_trail
;
1962 /** Creates a new image partition with an arbitrary name from a file */
1963 static struct image_partition_entry
read_file(const char *part_name
, const char *filename
, bool add_jffs2_eof
, struct flash_partition_entry
*file_system_partition
) {
1964 struct stat statbuf
;
1966 if (stat(filename
, &statbuf
) < 0)
1967 error(1, errno
, "unable to stat file `%s'", filename
);
1969 size_t len
= statbuf
.st_size
;
1971 if (add_jffs2_eof
) {
1972 if (file_system_partition
)
1973 len
= ALIGN(len
+ file_system_partition
->base
, 0x10000) + sizeof(jffs2_eof_mark
) - file_system_partition
->base
;
1975 len
= ALIGN(len
, 0x10000) + sizeof(jffs2_eof_mark
);
1978 struct image_partition_entry entry
= alloc_image_partition(part_name
, len
);
1980 FILE *file
= fopen(filename
, "rb");
1982 error(1, errno
, "unable to open file `%s'", filename
);
1984 if (fread(entry
.data
, statbuf
.st_size
, 1, file
) != 1)
1985 error(1, errno
, "unable to read file `%s'", filename
);
1987 if (add_jffs2_eof
) {
1988 uint8_t *eof
= entry
.data
+ statbuf
.st_size
, *end
= entry
.data
+entry
.size
;
1990 memset(eof
, 0xff, end
- eof
- sizeof(jffs2_eof_mark
));
1991 memcpy(end
- sizeof(jffs2_eof_mark
), jffs2_eof_mark
, sizeof(jffs2_eof_mark
));
1999 /** Creates a new image partition from arbitrary data */
2000 static struct image_partition_entry
put_data(const char *part_name
, const char *datain
, size_t len
) {
2002 struct image_partition_entry entry
= alloc_image_partition(part_name
, len
);
2004 memcpy(entry
.data
, datain
, len
);
2010 Copies a list of image partitions into an image buffer and generates the image partition table while doing so
2012 Example image partition table:
2014 fwup-ptn partition-table base 0x00800 size 0x00800
2015 fwup-ptn os-image base 0x01000 size 0x113b45
2016 fwup-ptn file-system base 0x114b45 size 0x1d0004
2017 fwup-ptn support-list base 0x2e4b49 size 0x000d1
2019 Each line of the partition table is terminated with the bytes 09 0d 0a ("\t\r\n"),
2020 the end of the partition table is marked with a zero byte.
2022 The firmware image must contain at least the partition-table and support-list partitions
2023 to be accepted. There aren't any alignment constraints for the image partitions.
2025 The partition-table partition contains the actual flash layout; partitions
2026 from the image partition table are mapped to the corresponding flash partitions during
2027 the firmware upgrade. The support-list partition contains a list of devices supported by
2030 The base offsets in the firmware partition table are relative to the end
2031 of the vendor information block, so the partition-table partition will
2032 actually start at offset 0x1814 of the image.
2034 I think partition-table must be the first partition in the firmware image.
2036 static void put_partitions(uint8_t *buffer
, const struct flash_partition_entry
*flash_parts
, const struct image_partition_entry
*parts
) {
2038 char *image_pt
= (char *)buffer
, *end
= image_pt
+ 0x800;
2040 size_t base
= 0x800;
2041 for (i
= 0; parts
[i
].name
; i
++) {
2042 for (j
= 0; flash_parts
[j
].name
; j
++) {
2043 if (!strcmp(flash_parts
[j
].name
, parts
[i
].name
)) {
2044 if (parts
[i
].size
> flash_parts
[j
].size
)
2045 error(1, 0, "%s partition too big (more than %u bytes)", flash_parts
[j
].name
, (unsigned)flash_parts
[j
].size
);
2050 assert(flash_parts
[j
].name
);
2052 memcpy(buffer
+ base
, parts
[i
].data
, parts
[i
].size
);
2054 size_t len
= end
-image_pt
;
2055 size_t w
= snprintf(image_pt
, len
, "fwup-ptn %s base 0x%05x size 0x%05x\t\r\n", parts
[i
].name
, (unsigned)base
, (unsigned)parts
[i
].size
);
2058 error(1, 0, "image partition table overflow?");
2062 base
+= parts
[i
].size
;
2066 /** Generates and writes the image MD5 checksum */
2067 static void put_md5(uint8_t *md5
, uint8_t *buffer
, unsigned int len
) {
2071 MD5_Update(&ctx
, md5_salt
, (unsigned int)sizeof(md5_salt
));
2072 MD5_Update(&ctx
, buffer
, len
);
2073 MD5_Final(md5
, &ctx
);
2078 Generates the firmware image in factory format
2084 0000-0003 Image size (4 bytes, big endian)
2085 0004-0013 MD5 hash (hash of a 16 byte salt and the image data starting with byte 0x14)
2086 0014-0017 Vendor information length (without padding) (4 bytes, big endian)
2087 0018-1013 Vendor information (4092 bytes, padded with 0xff; there seem to be older
2088 (VxWorks-based) TP-LINK devices which use a smaller vendor information block)
2089 1014-1813 Image partition table (2048 bytes, padded with 0xff)
2090 1814-xxxx Firmware partitions
2092 static void * generate_factory_image(struct device_info
*info
, const struct image_partition_entry
*parts
, size_t *len
) {
2096 for (i
= 0; parts
[i
].name
; i
++)
2097 *len
+= parts
[i
].size
;
2099 uint8_t *image
= malloc(*len
);
2101 error(1, errno
, "malloc");
2103 memset(image
, 0xff, *len
);
2107 size_t vendor_len
= strlen(info
->vendor
);
2108 put32(image
+0x14, vendor_len
);
2109 memcpy(image
+0x18, info
->vendor
, vendor_len
);
2112 put_partitions(image
+ 0x1014, info
->partitions
, parts
);
2113 put_md5(image
+0x04, image
+0x14, *len
-0x14);
2119 Generates the firmware image in sysupgrade format
2121 This makes some assumptions about the provided flash and image partition tables and
2122 should be generalized when TP-LINK starts building its safeloader into hardware with
2123 different flash layouts.
2125 static void * generate_sysupgrade_image(struct device_info
*info
, const struct image_partition_entry
*image_parts
, size_t *len
) {
2127 size_t flash_first_partition_index
= 0;
2128 size_t flash_last_partition_index
= 0;
2129 const struct flash_partition_entry
*flash_first_partition
= NULL
;
2130 const struct flash_partition_entry
*flash_last_partition
= NULL
;
2131 const struct image_partition_entry
*image_last_partition
= NULL
;
2133 /** Find first and last partitions */
2134 for (i
= 0; info
->partitions
[i
].name
; i
++) {
2135 if (!strcmp(info
->partitions
[i
].name
, info
->first_sysupgrade_partition
)) {
2136 flash_first_partition
= &info
->partitions
[i
];
2137 flash_first_partition_index
= i
;
2138 } else if (!strcmp(info
->partitions
[i
].name
, info
->last_sysupgrade_partition
)) {
2139 flash_last_partition
= &info
->partitions
[i
];
2140 flash_last_partition_index
= i
;
2144 assert(flash_first_partition
&& flash_last_partition
);
2145 assert(flash_first_partition_index
< flash_last_partition_index
);
2147 /** Find last partition from image to calculate needed size */
2148 for (i
= 0; image_parts
[i
].name
; i
++) {
2149 if (!strcmp(image_parts
[i
].name
, info
->last_sysupgrade_partition
)) {
2150 image_last_partition
= &image_parts
[i
];
2155 assert(image_last_partition
);
2157 *len
= flash_last_partition
->base
- flash_first_partition
->base
+ image_last_partition
->size
;
2159 uint8_t *image
= malloc(*len
);
2161 error(1, errno
, "malloc");
2163 memset(image
, 0xff, *len
);
2165 for (i
= flash_first_partition_index
; i
<= flash_last_partition_index
; i
++) {
2166 for (j
= 0; image_parts
[j
].name
; j
++) {
2167 if (!strcmp(info
->partitions
[i
].name
, image_parts
[j
].name
)) {
2168 if (image_parts
[j
].size
> info
->partitions
[i
].size
)
2169 error(1, 0, "%s partition too big (more than %u bytes)", info
->partitions
[i
].name
, (unsigned)info
->partitions
[i
].size
);
2170 memcpy(image
+ info
->partitions
[i
].base
- flash_first_partition
->base
, image_parts
[j
].data
, image_parts
[j
].size
);
2174 assert(image_parts
[j
].name
);
2181 /** Generates an image according to a given layout and writes it to a file */
2182 static void build_image(const char *output
,
2183 const char *kernel_image
,
2184 const char *rootfs_image
,
2188 struct device_info
*info
) {
2192 struct image_partition_entry parts
[7] = {};
2194 struct flash_partition_entry
*firmware_partition
= NULL
;
2195 struct flash_partition_entry
*os_image_partition
= NULL
;
2196 struct flash_partition_entry
*file_system_partition
= NULL
;
2197 size_t firmware_partition_index
= 0;
2199 for (i
= 0; info
->partitions
[i
].name
; i
++) {
2200 if (!strcmp(info
->partitions
[i
].name
, "firmware"))
2202 firmware_partition
= &info
->partitions
[i
];
2203 firmware_partition_index
= i
;
2207 if (firmware_partition
)
2209 os_image_partition
= &info
->partitions
[firmware_partition_index
];
2210 file_system_partition
= &info
->partitions
[firmware_partition_index
+ 1];
2213 if (stat(kernel_image
, &kernel
) < 0)
2214 error(1, errno
, "unable to stat file `%s'", kernel_image
);
2216 if (kernel
.st_size
> firmware_partition
->size
)
2217 error(1, 0, "kernel overflowed firmware partition\n");
2219 for (i
= MAX_PARTITIONS
-1; i
>= firmware_partition_index
+ 1; i
--)
2220 info
->partitions
[i
+1] = info
->partitions
[i
];
2222 file_system_partition
->name
= "file-system";
2223 file_system_partition
->base
= firmware_partition
->base
+ kernel
.st_size
;
2225 /* Align partition start to erase blocks for factory images only */
2227 file_system_partition
->base
= ALIGN(firmware_partition
->base
+ kernel
.st_size
, 0x10000);
2229 file_system_partition
->size
= firmware_partition
->size
- file_system_partition
->base
;
2231 os_image_partition
->name
= "os-image";
2232 os_image_partition
->size
= kernel
.st_size
;
2235 parts
[0] = make_partition_table(info
->partitions
);
2237 parts
[1] = make_soft_version_from_string(info
->soft_ver
);
2239 parts
[1] = make_soft_version(rev
);
2241 parts
[2] = make_support_list(info
);
2242 parts
[3] = read_file("os-image", kernel_image
, false, NULL
);
2243 parts
[4] = read_file("file-system", rootfs_image
, add_jffs2_eof
, file_system_partition
);
2245 /* Some devices need the extra-para partition to accept the firmware */
2246 if (strcasecmp(info
->id
, "ARCHER-C2-V3") == 0 ||
2247 strcasecmp(info
->id
, "ARCHER-C25-V1") == 0 ||
2248 strcasecmp(info
->id
, "ARCHER-C59-V2") == 0 ||
2249 strcasecmp(info
->id
, "ARCHER-C60-V2") == 0 ||
2250 strcasecmp(info
->id
, "ARCHER-C60-V3") == 0 ||
2251 strcasecmp(info
->id
, "TLWR1043NV5") == 0) {
2252 const char mdat
[11] = {0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00};
2253 parts
[5] = put_data("extra-para", mdat
, 11);
2254 } else if (strcasecmp(info
->id
, "ARCHER-A7-V5") == 0 || strcasecmp(info
->id
, "ARCHER-C7-V4") == 0 || strcasecmp(info
->id
, "ARCHER-C7-V5") == 0) {
2255 const char mdat
[11] = {0x01, 0x00, 0x00, 0x02, 0x00, 0x00, 0xca, 0x00, 0x01, 0x00, 0x00};
2256 parts
[5] = put_data("extra-para", mdat
, 11);
2257 } else if (strcasecmp(info
->id
, "ARCHER-C6-V2") == 0) {
2258 const char mdat
[11] = {0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00};
2259 parts
[5] = put_data("extra-para", mdat
, 11);
2260 } else if (strcasecmp(info
->id
, "ARCHER-C6-V2-US") == 0) {
2261 const char mdat
[11] = {0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x00};
2262 parts
[5] = put_data("extra-para", mdat
, 11);
2268 image
= generate_sysupgrade_image(info
, parts
, &len
);
2270 image
= generate_factory_image(info
, parts
, &len
);
2272 FILE *file
= fopen(output
, "wb");
2274 error(1, errno
, "unable to open output file");
2276 if (fwrite(image
, len
, 1, file
) != 1)
2277 error(1, 0, "unable to write output file");
2283 for (i
= 0; parts
[i
].name
; i
++)
2284 free_image_partition(parts
[i
]);
2288 static void usage(const char *argv0
) {
2290 "Usage: %s [OPTIONS...]\n"
2293 " -h show this help\n"
2295 "Create a new image:\n"
2296 " -B <board> create image for the board specified with <board>\n"
2297 " -k <file> read kernel image from the file <file>\n"
2298 " -r <file> read rootfs image from the file <file>\n"
2299 " -o <file> write output to the file <file>\n"
2300 " -V <rev> sets the revision number to <rev>\n"
2301 " -j add jffs2 end-of-filesystem markers\n"
2302 " -S create sysupgrade instead of factory image\n"
2303 "Extract an old image:\n"
2304 " -x <file> extract all oem firmware partition\n"
2305 " -d <dir> destination to extract the firmware partition\n"
2306 " -z <file> convert an oem firmware into a sysupgade file. Use -o for output file\n",
2312 static struct device_info
*find_board(const char *id
)
2314 struct device_info
*board
= NULL
;
2316 for (board
= boards
; board
->id
!= NULL
; board
++)
2317 if (strcasecmp(id
, board
->id
) == 0)
2323 static int add_flash_partition(
2324 struct flash_partition_entry
*part_list
,
2331 /* check if the list has a free entry */
2332 for (ptr
= 0; ptr
< max_entries
; ptr
++, part_list
++) {
2333 if (part_list
->name
== NULL
&&
2334 part_list
->base
== 0 &&
2335 part_list
->size
== 0)
2339 if (ptr
== max_entries
) {
2340 error(1, 0, "No free flash part entry available.");
2343 part_list
->name
= calloc(1, strlen(name
) + 1);
2344 if (!part_list
->name
) {
2345 error(1, 0, "Unable to allocate memory");
2348 memcpy((char *)part_list
->name
, name
, strlen(name
));
2349 part_list
->base
= base
;
2350 part_list
->size
= size
;
2355 /** read the partition table into struct flash_partition_entry */
2356 static int read_partition_table(
2357 FILE *file
, long offset
,
2358 struct flash_partition_entry
*entries
, size_t max_entries
,
2363 const char *parthdr
= NULL
;
2364 const char *fwuphdr
= "fwup-ptn";
2365 const char *flashhdr
= "partition";
2367 /* TODO: search for the partition table */
2377 error(1, 0, "Invalid partition table");
2380 if (fseek(file
, offset
, SEEK_SET
) < 0)
2381 error(1, errno
, "Can not seek in the firmware");
2383 if (fread(buf
, 2048, 1, file
) != 1)
2384 error(1, errno
, "Can not read fwup-ptn from the firmware");
2388 /* look for the partition header */
2389 if (memcmp(buf
, parthdr
, strlen(parthdr
)) != 0) {
2390 fprintf(stderr
, "DEBUG: can not find fwuphdr\n");
2395 end
= buf
+ sizeof(buf
);
2396 while ((ptr
+ strlen(parthdr
)) < end
&&
2397 memcmp(ptr
, parthdr
, strlen(parthdr
)) == 0) {
2401 char name
[32] = { 0 };
2403 unsigned long base
= 0;
2404 unsigned long size
= 0;
2406 end_part
= memchr(ptr
, '\n', (end
- ptr
));
2407 if (end_part
== NULL
) {
2408 /* in theory this should never happen, because a partition always ends with 0x09, 0x0D, 0x0A */
2412 for (int i
= 0; i
<= 4; i
++) {
2413 if (end_part
<= ptr
)
2416 end_element
= memchr(ptr
, 0x20, (end_part
- ptr
));
2417 if (end_element
== NULL
) {
2418 error(1, errno
, "Ignoring the rest of the partition entries.");
2423 /* partition header */
2425 ptr
= end_element
+ 1;
2429 name_len
= (end_element
- ptr
) > 31 ? 31 : (end_element
- ptr
);
2430 strncpy(name
, ptr
, name_len
);
2431 name
[name_len
] = '\0';
2432 ptr
= end_element
+ 1;
2437 ptr
= end_element
+ 1;
2442 base
= strtoul(ptr
, NULL
, 16);
2443 ptr
= end_element
+ 1;
2448 ptr
= end_element
+ 1;
2449 /* actual size. The last element doesn't have a sepeartor */
2450 size
= strtoul(ptr
, NULL
, 16);
2451 /* the part ends with 0x09, 0x0d, 0x0a */
2453 add_flash_partition(entries
, max_entries
, name
, base
, size
);
2462 static void write_partition(
2464 size_t firmware_offset
,
2465 struct flash_partition_entry
*entry
,
2471 fseek(input_file
, entry
->base
+ firmware_offset
, SEEK_SET
);
2473 for (offset
= 0; sizeof(buf
) + offset
<= entry
->size
; offset
+= sizeof(buf
)) {
2474 if (fread(buf
, sizeof(buf
), 1, input_file
) != 1)
2475 error(1, errno
, "Can not read partition from input_file");
2477 if (fwrite(buf
, sizeof(buf
), 1, output_file
) != 1)
2478 error(1, errno
, "Can not write partition to output_file");
2480 /* write last chunk smaller than buffer */
2481 if (offset
< entry
->size
) {
2482 offset
= entry
->size
- offset
;
2483 if (fread(buf
, offset
, 1, input_file
) != 1)
2484 error(1, errno
, "Can not read partition from input_file");
2485 if (fwrite(buf
, offset
, 1, output_file
) != 1)
2486 error(1, errno
, "Can not write partition to output_file");
2490 static int extract_firmware_partition(FILE *input_file
, size_t firmware_offset
, struct flash_partition_entry
*entry
, const char *output_directory
)
2493 char output
[PATH_MAX
];
2495 snprintf(output
, PATH_MAX
, "%s/%s", output_directory
, entry
->name
);
2496 output_file
= fopen(output
, "wb+");
2497 if (output_file
== NULL
) {
2498 error(1, errno
, "Can not open output file %s", output
);
2501 write_partition(input_file
, firmware_offset
, entry
, output_file
);
2503 fclose(output_file
);
2508 /** extract all partitions from the firmware file */
2509 static int extract_firmware(const char *input
, const char *output_directory
)
2511 struct flash_partition_entry entries
[16] = { 0 };
2512 size_t max_entries
= 16;
2513 size_t firmware_offset
= 0x1014;
2516 struct stat statbuf
;
2518 /* check input file */
2519 if (stat(input
, &statbuf
)) {
2520 error(1, errno
, "Can not read input firmware %s", input
);
2523 /* check if output directory exists */
2524 if (stat(output_directory
, &statbuf
)) {
2525 error(1, errno
, "Failed to stat output directory %s", output_directory
);
2528 if ((statbuf
.st_mode
& S_IFMT
) != S_IFDIR
) {
2529 error(1, errno
, "Given output directory is not a directory %s", output_directory
);
2532 input_file
= fopen(input
, "rb");
2534 if (read_partition_table(input_file
, firmware_offset
, entries
, 16, 0) != 0) {
2535 error(1, 0, "Error can not read the partition table (fwup-ptn)");
2538 for (size_t i
= 0; i
< max_entries
; i
++) {
2539 if (entries
[i
].name
== NULL
&&
2540 entries
[i
].base
== 0 &&
2541 entries
[i
].size
== 0)
2544 extract_firmware_partition(input_file
, firmware_offset
, &entries
[i
], output_directory
);
2550 static struct flash_partition_entry
*find_partition(
2551 struct flash_partition_entry
*entries
, size_t max_entries
,
2552 const char *name
, const char *error_msg
)
2554 for (size_t i
= 0; i
< max_entries
; i
++, entries
++) {
2555 if (strcmp(entries
->name
, name
) == 0)
2559 error(1, 0, "%s", error_msg
);
2563 static void write_ff(FILE *output_file
, size_t size
)
2568 memset(buf
, 0xff, sizeof(buf
));
2570 for (offset
= 0; offset
+ sizeof(buf
) < size
; offset
+= sizeof(buf
)) {
2571 if (fwrite(buf
, sizeof(buf
), 1, output_file
) != 1)
2572 error(1, errno
, "Can not write 0xff to output_file");
2575 /* write last chunk smaller than buffer */
2576 if (offset
< size
) {
2577 offset
= size
- offset
;
2578 if (fwrite(buf
, offset
, 1, output_file
) != 1)
2579 error(1, errno
, "Can not write partition to output_file");
2583 static void convert_firmware(const char *input
, const char *output
)
2585 struct flash_partition_entry fwup
[MAX_PARTITIONS
] = { 0 };
2586 struct flash_partition_entry flash
[MAX_PARTITIONS
] = { 0 };
2587 struct flash_partition_entry
*fwup_os_image
= NULL
, *fwup_file_system
= NULL
;
2588 struct flash_partition_entry
*flash_os_image
= NULL
, *flash_file_system
= NULL
;
2589 struct flash_partition_entry
*fwup_partition_table
= NULL
;
2590 size_t firmware_offset
= 0x1014;
2591 FILE *input_file
, *output_file
;
2593 struct stat statbuf
;
2595 /* check input file */
2596 if (stat(input
, &statbuf
)) {
2597 error(1, errno
, "Can not read input firmware %s", input
);
2600 input_file
= fopen(input
, "rb");
2602 error(1, 0, "Can not open input firmware %s", input
);
2604 output_file
= fopen(output
, "wb");
2606 error(1, 0, "Can not open output firmware %s", output
);
2608 if (read_partition_table(input_file
, firmware_offset
, fwup
, MAX_PARTITIONS
, 0) != 0) {
2609 error(1, 0, "Error can not read the partition table (fwup-ptn)");
2612 fwup_os_image
= find_partition(fwup
, MAX_PARTITIONS
,
2613 "os-image", "Error can not find os-image partition (fwup)");
2614 fwup_file_system
= find_partition(fwup
, MAX_PARTITIONS
,
2615 "file-system", "Error can not find file-system partition (fwup)");
2616 fwup_partition_table
= find_partition(fwup
, MAX_PARTITIONS
,
2617 "partition-table", "Error can not find partition-table partition");
2619 /* the flash partition table has a 0x00000004 magic haeder */
2620 if (read_partition_table(input_file
, firmware_offset
+ fwup_partition_table
->base
+ 4, flash
, MAX_PARTITIONS
, 1) != 0)
2621 error(1, 0, "Error can not read the partition table (flash)");
2623 flash_os_image
= find_partition(flash
, MAX_PARTITIONS
,
2624 "os-image", "Error can not find os-image partition (flash)");
2625 flash_file_system
= find_partition(flash
, MAX_PARTITIONS
,
2626 "file-system", "Error can not find file-system partition (flash)");
2628 /* write os_image to 0x0 */
2629 write_partition(input_file
, firmware_offset
, fwup_os_image
, output_file
);
2630 write_ff(output_file
, flash_os_image
->size
- fwup_os_image
->size
);
2632 /* write file-system behind os_image */
2633 fseek(output_file
, flash_file_system
->base
- flash_os_image
->base
, SEEK_SET
);
2634 write_partition(input_file
, firmware_offset
, fwup_file_system
, output_file
);
2635 write_ff(output_file
, flash_file_system
->size
- fwup_file_system
->size
);
2637 fclose(output_file
);
2641 int main(int argc
, char *argv
[]) {
2642 const char *board
= NULL
, *kernel_image
= NULL
, *rootfs_image
= NULL
, *output
= NULL
;
2643 const char *extract_image
= NULL
, *output_directory
= NULL
, *convert_image
= NULL
;
2644 bool add_jffs2_eof
= false, sysupgrade
= false;
2646 struct device_info
*info
;
2647 set_source_date_epoch();
2652 c
= getopt(argc
, argv
, "B:k:r:o:V:jSh:x:d:z:");
2662 kernel_image
= optarg
;
2666 rootfs_image
= optarg
;
2674 sscanf(optarg
, "r%u", &rev
);
2678 add_jffs2_eof
= true;
2690 output_directory
= optarg
;
2694 extract_image
= optarg
;
2698 convert_image
= optarg
;
2707 if (extract_image
|| output_directory
) {
2709 error(1, 0, "No factory/oem image given via -x <file>. Output directory is only valid with -x");
2710 if (!output_directory
)
2711 error(1, 0, "Can not extract an image without output directory. Use -d <dir>");
2712 extract_firmware(extract_image
, output_directory
);
2713 } else if (convert_image
) {
2715 error(1, 0, "Can not convert a factory/oem image into sysupgrade image without output file. Use -o <file>");
2716 convert_firmware(convert_image
, output
);
2719 error(1, 0, "no board has been specified");
2721 error(1, 0, "no kernel image has been specified");
2723 error(1, 0, "no rootfs image has been specified");
2725 error(1, 0, "no output filename has been specified");
2727 info
= find_board(board
);
2730 error(1, 0, "unsupported board %s", board
);
2732 build_image(output
, kernel_image
, rootfs_image
, rev
, add_jffs2_eof
, sysupgrade
, info
);