1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * Copyright (C) 2004 Manuel Novoa III <mjn3@codepoet.org>
8 * This is a hacked replacement for the 'trx' utility used to create
9 * wrt54g .trx firmware files. It isn't pretty, but it does the job
12 * As an extension, you can specify a larger maximum length for the
13 * .trx file using '-m'. It will be rounded up to be a multiple of 4K.
14 * NOTE: This space will be malloc()'d.
18 * Sigh... Make it endian-neutral.
20 * TODO: Support '-b' option to specify offsets for each file.
22 * February 19, 2005 - mbm
24 * Add -a (align offset) and -b (absolute offset)
26 * March 24, 2010 - markus
28 * extend trx header struct for new version
29 * assume v1 for as default
30 * Add option -2 to allow v2 header
41 #if __BYTE_ORDER == __BIG_ENDIAN
42 #define STORE32_LE(X) bswap_32(X)
43 #define LOAD32_LE(X) bswap_32(X)
44 #elif __BYTE_ORDER == __LITTLE_ENDIAN
45 #define STORE32_LE(X) (X)
46 #define LOAD32_LE(X) (X)
48 #error unkown endianness!
51 uint32_t crc32buf(char *buf
, size_t len
);
53 /**********************************************************************/
56 #define TRX_MAGIC 0x30524448 /* "HDR0" */
57 #define TRX_MAX_LEN 0x720000
58 #define TRX_NO_HEADER 1 /* Do not write TRX header */
61 uint32_t magic
; /* "HDR0" */
62 uint32_t len
; /* Length of file including header */
63 uint32_t crc32
; /* 32-bit CRC from flag_version to end of file */
64 uint32_t flag_version
; /* 0:15 flags, 16:31 version */
65 uint32_t offsets
[4]; /* Offsets of partitions from start of header */
68 /**********************************************************************/
70 void usage(void) __attribute__ (( __noreturn__
));
74 fprintf(stderr
, "Usage:\n");
75 fprintf(stderr
, " trx [-2] [-o outfile] [-m maxlen] [-a align] [-b absolute offset] [-x relative offset]\n");
76 fprintf(stderr
, " [-f file] [-f file [-f file [-f file (v2 only)]]]\n");
80 int main(int argc
, char **argv
)
90 uint32_t cur_len
, fsmark
=0, magic
;
91 unsigned long maxlen
= TRX_MAX_LEN
;
94 unsigned char binheader
[32];
96 fprintf(stderr
, "mjn3's trx replacement - v0.81.1\n");
98 if (!(buf
= malloc(maxlen
))) {
99 fprintf(stderr
, "malloc failed\n");
103 p
= (struct trx_header
*) buf
;
105 p
->magic
= STORE32_LE(TRX_MAGIC
);
106 cur_len
= sizeof(struct trx_header
) - 4; /* assume v1 header */
111 while ((c
= getopt(argc
, argv
, "-:2o:m:a:x:b:f:A:F:M:")) != -1) {
114 /* take care that nothing was written to buf so far */
115 if (cur_len
!= sizeof(struct trx_header
) - 4) {
116 fprintf(stderr
, "-2 has to be used before any other argument!\n");
131 p
->offsets
[i
++] = STORE32_LE(cur_len
);
133 if (!(in
= fopen(optarg
, "r"))) {
134 fprintf(stderr
, "can not open \"%s\" for reading\n", optarg
);
137 n
= fread(buf
+ cur_len
, 1, maxlen
- cur_len
, in
);
139 fprintf(stderr
, "fread failure or file \"%s\" too large\n",optarg
);
147 memset(buf
+ cur_len
+ n
, 0, ROUND
- (n
& (ROUND
-1)));
148 n
+= ROUND
- (n
& (ROUND
-1));
156 if (ofn
&& !(out
= fopen(ofn
, "w"))) {
157 fprintf(stderr
, "can not open \"%s\" for writing\n", ofn
);
164 maxlen
= strtoul(optarg
, &e
, 0);
165 if (errno
|| (e
== optarg
) || *e
) {
166 fprintf(stderr
, "illegal numeric string\n");
171 if (maxlen
& (ROUND
-1)) {
172 maxlen
+= (ROUND
- (maxlen
& (ROUND
-1)));
174 if (maxlen
< ROUND
) {
175 fprintf(stderr
, "maxlen too small (or wrapped)\n");
178 if (maxlen
> TRX_MAX_LEN
) {
179 fprintf(stderr
, "WARNING: maxlen exceeds default maximum! Beware of overwriting nvram!\n");
181 if (!(buf
= realloc(buf
,maxlen
))) {
182 fprintf(stderr
, "realloc failed");
185 p
= (struct trx_header
*) buf
;
189 n
= strtoul(optarg
, &e
, 0);
190 if (errno
|| (e
== optarg
) || *e
) {
191 fprintf(stderr
, "illegal numeric string\n");
194 if (cur_len
& (n
-1)) {
195 n
= n
- (cur_len
& (n
-1));
196 memset(buf
+ cur_len
, 0, n
);
202 n
= strtoul(optarg
, &e
, 0);
203 if (errno
|| (e
== optarg
) || *e
) {
204 fprintf(stderr
, "illegal numeric string\n");
208 fprintf(stderr
, "WARNING: current length exceeds -b %d offset\n",(int) n
);
210 memset(buf
+ cur_len
, 0, n
- cur_len
);
216 n2
= strtol(optarg
, &e
, 0);
217 if (errno
|| (e
== optarg
) || *e
) {
218 fprintf(stderr
, "illegal numeric string\n");
223 fprintf(stderr
, "WARNING: current length smaller then -x %d offset\n",(int) n2
);
228 memset(buf
+ cur_len
, 0, n2
);
235 magic
= strtoul(optarg
, &e
, 0);
236 if (errno
|| (e
== optarg
) || *e
) {
237 fprintf(stderr
, "illegal numeric string\n");
240 p
->magic
= STORE32_LE(magic
);
246 p
->flag_version
= STORE32_LE((trx_version
<< 16));
249 fprintf(stderr
, "we require atleast one filename\n");
255 n
= cur_len
& (ROUND
-1);
257 memset(buf
+ cur_len
, 0, ROUND
- n
);
258 cur_len
+= ROUND
- n
;
261 /* for TRXv2 set bin-header Flags to 0xFF for CRC calculation like CFE does */
262 if (trx_version
== 2) {
263 if(cur_len
- LOAD32_LE(p
->offsets
[3]) < sizeof(binheader
)) {
264 fprintf(stderr
, "TRXv2 binheader too small!\n");
267 memcpy(binheader
, buf
+ LOAD32_LE(p
->offsets
[3]), sizeof(binheader
)); /* save header */
268 memset(buf
+ LOAD32_LE(p
->offsets
[3]) + 22, 0xFF, 8); /* set stable and try1-3 to 0xFF */
271 p
->crc32
= crc32buf((char *) &p
->flag_version
,
272 ((fsmark
)?fsmark
:cur_len
) - offsetof(struct trx_header
, flag_version
));
273 p
->crc32
= STORE32_LE(p
->crc32
);
275 p
->len
= STORE32_LE((fsmark
) ? fsmark
: cur_len
);
277 /* restore TRXv2 bin-header */
278 if (trx_version
== 2) {
279 memcpy(buf
+ LOAD32_LE(p
->offsets
[3]), binheader
, sizeof(binheader
));
282 if (!fwrite(buf
, cur_len
, 1, out
) || fflush(out
)) {
283 fprintf(stderr
, "fwrite failed\n");
292 /**********************************************************************/
293 /* The following was grabbed and tweaked from the old snippets collection
294 * of public domain C code. */
296 /**********************************************************************\
297 |* Demonstration program to compute the 32-bit CRC used as the frame *|
298 |* check sequence in ADCCP (ANSI X3.66, also known as FIPS PUB 71 *|
299 |* and FED-STD-1003, the U.S. versions of CCITT's X.25 link-level *|
300 |* protocol). The 32-bit FCS was added via the Federal Register, *|
301 |* 1 June 1982, p.23798. I presume but don't know for certain that *|
302 |* this polynomial is or will be included in CCITT V.41, which *|
303 |* defines the 16-bit CRC (often called CRC-CCITT) polynomial. FIPS *|
304 |* PUB 78 says that the 32-bit FCS reduces otherwise undetected *|
305 |* errors by a factor of 10^-5 over 16-bit FCS. *|
306 \**********************************************************************/
308 /* Copyright (C) 1986 Gary S. Brown. You may use this program, or
309 code or tables extracted from it, as desired without restriction.*/
311 /* First, the polynomial itself and its table of feedback terms. The */
313 /* X^32+X^26+X^23+X^22+X^16+X^12+X^11+X^10+X^8+X^7+X^5+X^4+X^2+X^1+X^0 */
314 /* Note that we take it "backwards" and put the highest-order term in */
315 /* the lowest-order bit. The X^32 term is "implied"; the LSB is the */
316 /* X^31 term, etc. The X^0 term (usually shown as "+1") results in */
317 /* the MSB being 1. */
319 /* Note that the usual hardware shift register implementation, which */
320 /* is what we're using (we're merely optimizing it by doing eight-bit */
321 /* chunks at a time) shifts bits into the lowest-order term. In our */
322 /* implementation, that means shifting towards the right. Why do we */
323 /* do it this way? Because the calculated CRC must be transmitted in */
324 /* order from highest-order term to lowest-order term. UARTs transmit */
325 /* characters in order from LSB to MSB. By storing the CRC this way, */
326 /* we hand it to the UART in the order low-byte to high-byte; the UART */
327 /* sends each low-bit to hight-bit; and the result is transmission bit */
328 /* by bit from highest- to lowest-order term without requiring any bit */
329 /* shuffling on our part. Reception works similarly. */
331 /* The feedback terms table consists of 256, 32-bit entries. Notes: */
333 /* 1. The table can be generated at runtime if desired; code to do so */
334 /* is shown later. It might not be obvious, but the feedback */
335 /* terms simply represent the results of eight shift/xor opera- */
336 /* tions for all combinations of data and CRC register values. */
338 /* 2. The CRC accumulation logic is the same for all CRC polynomials, */
339 /* be they sixteen or thirty-two bits wide. You simply choose the */
340 /* appropriate table. Alternatively, because the table can be */
341 /* generated at runtime, you can start by generating the table for */
342 /* the polynomial in question and use exactly the same "updcrc", */
343 /* if your application needn't simultaneously handle two CRC */
344 /* polynomials. (Note, however, that XMODEM is strange.) */
346 /* 3. For 16-bit CRCs, the table entries need be only 16 bits wide; */
347 /* of course, 32-bit entries work OK if the high 16 bits are zero. */
349 /* 4. The values must be right-shifted by eight bits by the "updcrc" */
350 /* logic; the shift must be unsigned (bring in zeroes). On some */
351 /* hardware you could probably optimize the shift in assembler by */
352 /* using byte-swap instructions. */
354 static const uint32_t crc_32_tab
[] = { /* CRC polynomial 0xedb88320 */
355 0x00000000, 0x77073096, 0xee0e612c, 0x990951ba, 0x076dc419, 0x706af48f,
356 0xe963a535, 0x9e6495a3, 0x0edb8832, 0x79dcb8a4, 0xe0d5e91e, 0x97d2d988,
357 0x09b64c2b, 0x7eb17cbd, 0xe7b82d07, 0x90bf1d91, 0x1db71064, 0x6ab020f2,
358 0xf3b97148, 0x84be41de, 0x1adad47d, 0x6ddde4eb, 0xf4d4b551, 0x83d385c7,
359 0x136c9856, 0x646ba8c0, 0xfd62f97a, 0x8a65c9ec, 0x14015c4f, 0x63066cd9,
360 0xfa0f3d63, 0x8d080df5, 0x3b6e20c8, 0x4c69105e, 0xd56041e4, 0xa2677172,
361 0x3c03e4d1, 0x4b04d447, 0xd20d85fd, 0xa50ab56b, 0x35b5a8fa, 0x42b2986c,
362 0xdbbbc9d6, 0xacbcf940, 0x32d86ce3, 0x45df5c75, 0xdcd60dcf, 0xabd13d59,
363 0x26d930ac, 0x51de003a, 0xc8d75180, 0xbfd06116, 0x21b4f4b5, 0x56b3c423,
364 0xcfba9599, 0xb8bda50f, 0x2802b89e, 0x5f058808, 0xc60cd9b2, 0xb10be924,
365 0x2f6f7c87, 0x58684c11, 0xc1611dab, 0xb6662d3d, 0x76dc4190, 0x01db7106,
366 0x98d220bc, 0xefd5102a, 0x71b18589, 0x06b6b51f, 0x9fbfe4a5, 0xe8b8d433,
367 0x7807c9a2, 0x0f00f934, 0x9609a88e, 0xe10e9818, 0x7f6a0dbb, 0x086d3d2d,
368 0x91646c97, 0xe6635c01, 0x6b6b51f4, 0x1c6c6162, 0x856530d8, 0xf262004e,
369 0x6c0695ed, 0x1b01a57b, 0x8208f4c1, 0xf50fc457, 0x65b0d9c6, 0x12b7e950,
370 0x8bbeb8ea, 0xfcb9887c, 0x62dd1ddf, 0x15da2d49, 0x8cd37cf3, 0xfbd44c65,
371 0x4db26158, 0x3ab551ce, 0xa3bc0074, 0xd4bb30e2, 0x4adfa541, 0x3dd895d7,
372 0xa4d1c46d, 0xd3d6f4fb, 0x4369e96a, 0x346ed9fc, 0xad678846, 0xda60b8d0,
373 0x44042d73, 0x33031de5, 0xaa0a4c5f, 0xdd0d7cc9, 0x5005713c, 0x270241aa,
374 0xbe0b1010, 0xc90c2086, 0x5768b525, 0x206f85b3, 0xb966d409, 0xce61e49f,
375 0x5edef90e, 0x29d9c998, 0xb0d09822, 0xc7d7a8b4, 0x59b33d17, 0x2eb40d81,
376 0xb7bd5c3b, 0xc0ba6cad, 0xedb88320, 0x9abfb3b6, 0x03b6e20c, 0x74b1d29a,
377 0xead54739, 0x9dd277af, 0x04db2615, 0x73dc1683, 0xe3630b12, 0x94643b84,
378 0x0d6d6a3e, 0x7a6a5aa8, 0xe40ecf0b, 0x9309ff9d, 0x0a00ae27, 0x7d079eb1,
379 0xf00f9344, 0x8708a3d2, 0x1e01f268, 0x6906c2fe, 0xf762575d, 0x806567cb,
380 0x196c3671, 0x6e6b06e7, 0xfed41b76, 0x89d32be0, 0x10da7a5a, 0x67dd4acc,
381 0xf9b9df6f, 0x8ebeeff9, 0x17b7be43, 0x60b08ed5, 0xd6d6a3e8, 0xa1d1937e,
382 0x38d8c2c4, 0x4fdff252, 0xd1bb67f1, 0xa6bc5767, 0x3fb506dd, 0x48b2364b,
383 0xd80d2bda, 0xaf0a1b4c, 0x36034af6, 0x41047a60, 0xdf60efc3, 0xa867df55,
384 0x316e8eef, 0x4669be79, 0xcb61b38c, 0xbc66831a, 0x256fd2a0, 0x5268e236,
385 0xcc0c7795, 0xbb0b4703, 0x220216b9, 0x5505262f, 0xc5ba3bbe, 0xb2bd0b28,
386 0x2bb45a92, 0x5cb36a04, 0xc2d7ffa7, 0xb5d0cf31, 0x2cd99e8b, 0x5bdeae1d,
387 0x9b64c2b0, 0xec63f226, 0x756aa39c, 0x026d930a, 0x9c0906a9, 0xeb0e363f,
388 0x72076785, 0x05005713, 0x95bf4a82, 0xe2b87a14, 0x7bb12bae, 0x0cb61b38,
389 0x92d28e9b, 0xe5d5be0d, 0x7cdcefb7, 0x0bdbdf21, 0x86d3d2d4, 0xf1d4e242,
390 0x68ddb3f8, 0x1fda836e, 0x81be16cd, 0xf6b9265b, 0x6fb077e1, 0x18b74777,
391 0x88085ae6, 0xff0f6a70, 0x66063bca, 0x11010b5c, 0x8f659eff, 0xf862ae69,
392 0x616bffd3, 0x166ccf45, 0xa00ae278, 0xd70dd2ee, 0x4e048354, 0x3903b3c2,
393 0xa7672661, 0xd06016f7, 0x4969474d, 0x3e6e77db, 0xaed16a4a, 0xd9d65adc,
394 0x40df0b66, 0x37d83bf0, 0xa9bcae53, 0xdebb9ec5, 0x47b2cf7f, 0x30b5ffe9,
395 0xbdbdf21c, 0xcabac28a, 0x53b39330, 0x24b4a3a6, 0xbad03605, 0xcdd70693,
396 0x54de5729, 0x23d967bf, 0xb3667a2e, 0xc4614ab8, 0x5d681b02, 0x2a6f2b94,
397 0xb40bbe37, 0xc30c8ea1, 0x5a05df1b, 0x2d02ef8d
400 #define UPDC32(octet,crc) (crc_32_tab[((crc) ^ (octet)) & 0xff] ^ ((crc) >> 8))
402 uint32_t crc32buf(char *buf
, size_t len
)
408 for ( ; len
; --len
, ++buf
)
410 crc
= UPDC32(*buf
, crc
);