#!/bin/sh # List of parameters passed through environment #* reason -- why this script was called, one of: pre-init connect disconnect #* VPNGATEWAY -- vpn gateway address (always present) #* TUNDEV -- tunnel device (always present) #* INTERNAL_IP4_ADDRESS -- address (always present) #* INTERNAL_IP4_MTU -- mtu (often unset) #* INTERNAL_IP4_NETMASK -- netmask (often unset) #* INTERNAL_IP4_NETMASKLEN -- netmask length (often unset) #* INTERNAL_IP4_NETADDR -- address of network (only present if netmask is set) #* INTERNAL_IP4_DNS -- list of dns servers #* INTERNAL_IP4_NBNS -- list of wins servers #* INTERNAL_IP6_ADDRESS -- IPv6 address #* INTERNAL_IP6_NETMASK -- IPv6 netmask #* INTERNAL_IP6_DNS -- IPv6 list of dns servers #* CISCO_DEF_DOMAIN -- default domain name #* CISCO_BANNER -- banner from server #* CISCO_SPLIT_INC -- number of networks in split-network-list #* CISCO_SPLIT_INC_%d_ADDR -- network address #* CISCO_SPLIT_INC_%d_MASK -- subnet mask (for example: 255.255.255.0) #* CISCO_SPLIT_INC_%d_MASKLEN -- subnet masklen (for example: 24) #* CISCO_SPLIT_INC_%d_PROTOCOL -- protocol (often just 0) #* CISCO_SPLIT_INC_%d_SPORT -- source port (often just 0) #* CISCO_SPLIT_INC_%d_DPORT -- destination port (often just 0) #* CISCO_IPV6_SPLIT_INC -- number of networks in IPv6 split-network-list #* CISCO_IPV6_SPLIT_INC_%d_ADDR -- IPv6 network address #* CISCO_IPV6_SPLIT_INC_$%d_MASKLEN -- IPv6 subnet masklen HOOKS_DIR=/etc/openconnect # FIXMEs: # Section A: route handling # 1) The 3 values CISCO_SPLIT_INC_%d_PROTOCOL/SPORT/DPORT are currently being ignored # In order to use them, we'll probably need os specific solutions # * Linux: iptables -t mangle -I PREROUTING -j ROUTE --oif $TUNDEV # This would be an *alternative* to changing the routes (and thus 2) and 3) # shouldn't be relevant at all) # 2) There are two different functions to set routes: generic routes and the # default route. Why isn't the defaultroute handled via the generic route case? # 3) In the split tunnel case, all routes but the default route might get replaced # without getting restored later. We should explicitely check and save them just # like the defaultroute # 4) Replies to a dhcp-server should never be sent into the tunnel # Section B: Split DNS handling # 1) We parse CISCO_SPLIT_DNS and use dnsmasq to set it do_connect() { if [ -n "$CISCO_BANNER" ]; then logger -t openconnect "Connect Banner:" echo "$CISCO_BANNER" | while read LINE ; do logger -t openconnect "|" "$LINE" ; done fi proto_init_update "$TUNDEV" 1 if [ -n "$INTERNAL_IP4_MTU" ]; then MTU=$INTERNAL_IP4_MTU fi if [ -z "$MTU" ]; then MTU=1412 fi proto_add_ipv4_address "$INTERNAL_IP4_ADDRESS" 32 "" "$INTERNAL_IP4_ADDRESS" if [ -n "$INTERNAL_IP4_NETMASKLEN" ]; then proto_add_ipv4_route "$INTERNAL_IP4_NETADDR" "$INTERNAL_IP4_NETMASKLEN" fi # If the netmask is provided, it contains the address _and_ netmask if [ -n "$INTERNAL_IP6_ADDRESS" ] && [ -z "$INTERNAL_IP6_NETMASK" ]; then INTERNAL_IP6_NETMASK="$INTERNAL_IP6_ADDRESS/128" fi if [ -n "$INTERNAL_IP6_NETMASK" ]; then addr="${INTERNAL_IP6_NETMASK%%/*}" mask="${INTERNAL_IP6_NETMASK##*/}" [[ "$addr" != "$mask" ]] && proto_add_ipv6_address "$addr" "$mask" fi DNSMASQ_FILE="/tmp/dnsmasq.d/openconnect.$TUNDEV" LOCAL_DOMAIN=$(uci get dhcp.@dnsmasq[0].domain) rm -f $DNSMASQ_FILE if [ -n "$CISCO_SPLIT_DNS" ] && [ -d "/tmp/dnsmasq.d/" ];then SDNS=`echo $CISCO_SPLIT_DNS|sed 's/,/\n/g'` echo "$SDNS" | while read i; do if [ "$i" = "$LOCAL_DOMAIN" ];then continue fi if [ -n "$INTERNAL_IP4_DNS" ];then for dns in $INTERNAL_IP4_DNS;do echo "server=/$i/$dns" >> $DNSMASQ_FILE done fi if [ -n "$INTERNAL_IP6_DNS" ];then for dns in $INTERNAL_IP6_DNS;do echo "server=/$i/$dns" >> $DNSMASQ_FILE done fi echo "rebind-domain-ok=$i" >> $DNSMASQ_FILE done /etc/init.d/dnsmasq restart else if [ -n "$INTERNAL_IP4_DNS" ];then for dns in $INTERNAL_IP4_DNS;do proto_add_dns_server "$dns" done fi if [ -n "$INTERNAL_IP6_DNS" ];then for dns in $INTERNAL_IP6_DNS;do proto_add_dns_server "$dns" done fi if [ -n "$CISCO_DEF_DOMAIN" ] && [ "$CISCO_DEF_DOMAIN" != "$LOCAL_DOMAIN" ];then if [ -n "$INTERNAL_IP4_DNS" ];then for dns in $INTERNAL_IP4_DNS;do echo "server=/$CISCO_DEF_DOMAIN/$dns" >> $DNSMASQ_FILE done fi if [ -n "$INTERNAL_IP6_DNS" ];then for dns in $INTERNAL_IP6_DNS;do echo "server=/$CISCO_DEF_DOMAIN/$dns" >> $DNSMASQ_FILE done fi proto_add_dns_search "$CISCO_DEF_DOMAIN" fi fi if [ -n "$CISCO_SPLIT_INC" ]; then i=0 while [ $i -lt $CISCO_SPLIT_INC ] ; do eval NETWORK="\${CISCO_SPLIT_INC_${i}_ADDR}" eval NETMASK="\${CISCO_SPLIT_INC_${i}_MASK}" eval NETMASKLEN="\${CISCO_SPLIT_INC_${i}_MASKLEN}" if [ $NETWORK != "0.0.0.0" ]; then proto_add_ipv4_route "$NETWORK" "$NETMASKLEN" else proto_add_ipv4_route "0.0.0.0" 0 fi i=$(($i + 1)) done elif [ -n "$INTERNAL_IP4_ADDRESS" ]; then proto_add_ipv4_route "0.0.0.0" 0 fi if [ -n "$CISCO_IPV6_SPLIT_INC" ]; then i=0 while [ $i -lt $CISCO_IPV6_SPLIT_INC ] ; do eval NETWORK="\${CISCO_IPV6_SPLIT_INC_${i}_ADDR}" eval NETMASKLEN="\${CISCO_IPV6_SPLIT_INC_${i}_MASKLEN}" if [ $NETMASKLEN -lt 128 ]; then proto_add_ipv6_route "$NETWORK" "$NETMASKLEN" else proto_add_ipv6_route "::0" 0 fi i=$(($i + 1)) done elif [ -n "$INTERNAL_IP6_NETMASK" -o -n "$INTERNAL_IP6_ADDRESS" ]; then proto_add_ipv6_route "::0" 0 fi proto_send_update "$INTERFACE" } do_disconnect() { if [ -f "/tmp/dnsmasq.d/openconnect.$TUNDEV" ]; then rm -f "/tmp/dnsmasq.d/openconnect.$TUNDEV" /etc/init.d/dnsmasq restart fi proto_init_update "$TUNDEV" 0 proto_send_update "$INTERFACE" } #### Hooks run_hooks() { HOOK="$1" if [ -d ${HOOKS_DIR}/${HOOK}.d ]; then for script in ${HOOKS_DIR}/${HOOK}.d/* ; do [ -f $script ] && . $script done fi } #### Main if [ -z "$reason" ]; then logger -t openconnect "this script must be called from vpnc" 1>&2 exit 1 fi if [ -z "$INTERFACE" ]; then logger -t openconnect "this script must be called for an active interface" exit 1 fi . /lib/netifd/netifd-proto.sh case "$reason" in pre-init) run_hooks pre-init ;; connect) run_hooks connect do_connect run_hooks post-connect ;; disconnect) run_hooks disconnect do_disconnect run_hooks post-disconnect ;; reconnect) run_hooks reconnect ;; attempt-reconnect) run_hooks attempt-reconnect ;; *) logger -t openconnect "unknown reason '$reason'. Maybe vpnc-script is out of date" 1>&2 exit 1 ;; esac exit 0