# # Copyright (C) 2007-2015 OpenWrt.org # # This is free software, licensed under the GNU General Public License v2. # See /LICENSE for more information. # include $(TOPDIR)/rules.mk include $(INCLUDE_DIR)/kernel.mk PKG_NAME:=mac80211 PKG_VERSION:=2016-06-20 PKG_RELEASE:=1 PKG_SOURCE_URL:=http://mirror2.openwrt.org/sources PKG_BACKPORT_VERSION:= PKG_MD5SUM:=29c79bdc3928ef5113b17042ebda9237 PKG_SOURCE:=compat-wireless-$(PKG_VERSION)$(PKG_BACKPORT_VERSION).tar.bz2 PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/compat-wireless-$(PKG_VERSION) PKG_BUILD_PARALLEL:=1 PKG_MAINTAINER:=Felix Fietkau PKG_DRIVERS = \ adm8211 \ airo \ ath ath5k ath9k ath9k-common ath9k-htc ath10k \ b43 b43legacy \ carl9170 \ hermes hermes-pci hermes-pcmcia hermes-plx\ iwl-legacy iwl3945 iwl4965 iwlwifi \ lib80211 \ libipw ipw2100 ipw2200 \ libertas-sdio libertas-usb libertas-spi \ mac80211-hwsim \ mt7601u \ mwl8k mwifiex-pcie \ p54-common p54-pci p54-spi p54-usb \ rt2x00-lib rt2x00-pci rt2x00-usb \ rt2400-pci rt2500-pci rt2500-usb \ rt2800-lib rt2800-mmio rt2800-pci rt2800-soc rt2800-usb \ rt61-pci rt73-usb \ rtl8180 rtl8187 \ rtlwifi rtlwifi-pci rtlwifi-usb rtl8192c-common rtl8192ce rtl8192se \ rtl8192de rtl8192cu \ rtl8xxxu \ wlcore wl12xx wl18xx \ zd1211rw PKG_CONFIG_DEPENDS:= \ CONFIG_PACKAGE_kmod-mac80211 \ $(patsubst %,CONFIG_PACKAGE_kmod-%,$(PKG_DRIVERS)) \ CONFIG_PACKAGE_MAC80211_DEBUGFS \ CONFIG_PACKAGE_MAC80211_MESH \ CONFIG_PACKAGE_MAC80211_TRACING \ CONFIG_PACKAGE_ATH_DEBUG \ CONFIG_PACKAGE_ATH_DFS \ CONFIG_PACKAGE_B43_DEBUG \ CONFIG_PACKAGE_B43_PIO \ CONFIG_PACKAGE_B43_PHY_G \ CONFIG_PACKAGE_B43_PHY_N \ CONFIG_PACKAGE_B43_PHY_LP \ CONFIG_PACKAGE_B43_PHY_HT \ CONFIG_PACKAGE_B43_BUSES_BCMA_AND_SSB \ CONFIG_PACKAGE_B43_BUSES_BCMA \ CONFIG_PACKAGE_B43_BUSES_SSB \ CONFIG_PACKAGE_BRCM80211_DEBUG \ CONFIG_PACKAGE_IWLWIFI_DEBUG \ CONFIG_PACKAGE_IWLWIFI_DEBUGFS \ CONFIG_PACKAGE_RTLWIFI_DEBUG \ CONFIG_ATH9K_SUPPORT_PCOEM \ CONFIG_ATH9K_TX99 \ CONFIG_ATH_USER_REGD \ include $(INCLUDE_DIR)/package.mk WMENU:=Wireless Drivers define KernelPackage/mac80211/Default SUBMENU:=$(WMENU) URL:=https://wireless.wiki.kernel.org/ MAINTAINER:=Felix Fietkau endef define KernelPackage/cfg80211 $(call KernelPackage/mac80211/Default) TITLE:=cfg80211 - wireless configuration API DEPENDS+= +iw FILES:= \ $(PKG_BUILD_DIR)/compat/compat.ko \ $(PKG_BUILD_DIR)/net/wireless/cfg80211.ko endef define KernelPackage/cfg80211/description cfg80211 is the Linux wireless LAN (802.11) configuration API. endef define KernelPackage/mac80211 $(call KernelPackage/mac80211/Default) TITLE:=Linux 802.11 Wireless Networking Stack DEPENDS+= +kmod-cfg80211 +hostapd-common KCONFIG:=\ CONFIG_AVERAGE=y FILES:= $(PKG_BUILD_DIR)/net/mac80211/mac80211.ko MENU:=1 endef define KernelPackage/mac80211/config if PACKAGE_kmod-mac80211 config PACKAGE_MAC80211_DEBUGFS bool "Export mac80211 internals in DebugFS" select KERNEL_DEBUG_FS default y help Select this to see extensive information about the internal state of mac80211 in debugfs. config PACKAGE_MAC80211_TRACING bool "Enable tracing (mac80211 and supported drivers)" select KERNEL_FTRACE select KERNEL_ENABLE_DEFAULT_TRACERS default n help Select this to enable tracing of mac80211 and related wifi drivers (using trace-cmd). config PACKAGE_MAC80211_MESH bool "Enable 802.11s mesh support" default y endif endef define KernelPackage/mac80211/description Generic IEEE 802.11 Networking Stack (mac80211) endef define KernelPackage/adm8211 $(call KernelPackage/mac80211/Default) TITLE:=ADMTek 8211 support DEPENDS+=@PCI_SUPPORT +kmod-mac80211 +kmod-eeprom-93cx6 FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/admtek/adm8211.ko AUTOLOAD:=$(call AutoProbe,adm8211) endef define KernelPackage/airo $(call KernelPackage/mac80211/Default) TITLE:=Cisco Aironet driver DEPENDS+=@PCI_SUPPORT +@DRIVER_WEXT_SUPPORT +kmod-cfg80211 @TARGET_x86 FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/cisco/airo.ko AUTOLOAD:=$(call AutoProbe,airo) endef define KernelPackage/airo/description Kernel support for Cisco Aironet cards endef define KernelPackage/ath/config if PACKAGE_kmod-ath config ATH_USER_REGD bool "Force Atheros drivers to respect the user's regdomain settings" default y help Atheros' idea of regulatory handling is that the EEPROM of the card defines the regulatory limits and the user is only allowed to restrict the settings even further, even if the country allows frequencies or power levels that are forbidden by the EEPROM settings. Select this option if you want the driver to respect the user's decision about regulatory settings. config PACKAGE_ATH_DEBUG bool "Atheros wireless debugging" help Say Y, if you want to debug atheros wireless drivers. Only ath9k & ath10k make use of this. config PACKAGE_ATH_DFS bool "Enable DFS support" default y help Dynamic frequency selection (DFS) is required for most of the 5 GHz band channels in Europe, US, and Japan. Select this option if you want to use such channels. endif endef define KernelPackage/ath $(call KernelPackage/mac80211/Default) TITLE:=Atheros common driver part DEPENDS+= @PCI_SUPPORT||USB_SUPPORT||TARGET_ar71xx||TARGET_ath25 +kmod-mac80211 FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath.ko MENU:=1 endef define KernelPackage/ath/description This module contains some common parts needed by Atheros Wireless drivers. endef define KernelPackage/ath5k $(call KernelPackage/mac80211/Default) TITLE:=Atheros 5xxx wireless cards support URL:=https://wireless.wiki.kernel.org/en/users/drivers/ath5k DEPENDS+= @PCI_SUPPORT||@TARGET_ath25 +kmod-ath FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath5k/ath5k.ko AUTOLOAD:=$(call AutoProbe,ath5k) endef define KernelPackage/ath5k/description This module adds support for wireless adapters based on Atheros 5xxx chipset. endef define KernelPackage/ath9k-common $(call KernelPackage/mac80211/Default) TITLE:=Atheros 802.11n wireless devices (common code for ath9k and ath9k_htc) URL:=https://wireless.wiki.kernel.org/en/users/drivers/ath9k HIDDEN:=1 DEPENDS+= @PCI_SUPPORT||USB_SUPPORT||TARGET_ar71xx +kmod-ath +@DRIVER_11N_SUPPORT +@DRIVER_11W_SUPPORT +@KERNEL_RELAY FILES:= \ $(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath9k/ath9k_common.ko \ $(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath9k/ath9k_hw.ko endef define KernelPackage/ath9k $(call KernelPackage/mac80211/Default) TITLE:=Atheros 802.11n PCI wireless cards support URL:=https://wireless.wiki.kernel.org/en/users/drivers/ath9k DEPENDS+= @PCI_SUPPORT||TARGET_ar71xx +kmod-ath9k-common FILES:= \ $(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath9k/ath9k.ko AUTOLOAD:=$(call AutoProbe,ath9k) endef define KernelPackage/ath9k/description This module adds support for wireless adapters based on Atheros IEEE 802.11n AR5008 and AR9001 family of chipsets. endef define KernelPackage/ath9k/config config ATH9K_SUPPORT_PCOEM bool "Support chips used in PC OEM cards" depends on PACKAGE_kmod-ath9k config ATH9K_TX99 bool "Enable TX99 support" depends on PACKAGE_kmod-ath9k endef define KernelPackage/ath9k-htc $(call KernelPackage/mac80211/Default) TITLE:=Atheros 802.11n USB device support URL:=https://wireless.wiki.kernel.org/en/users/drivers/ath9k DEPENDS+= @USB_SUPPORT +kmod-ath9k-common +kmod-usb-core +ath9k-htc-firmware FILES:= \ $(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath9k/ath9k_htc.ko AUTOLOAD:=$(call AutoProbe,ath9k_htc) endef define KernelPackage/ath9k-htc/description This module adds support for wireless adapters based on Atheros USB AR9271 and AR7010 family of chipsets. endef define KernelPackage/ath10k $(call KernelPackage/mac80211/Default) TITLE:=Atheros 802.11ac wireless cards support URL:=https://wireless.wiki.kernel.org/en/users/Drivers/ath10k DEPENDS+= @PCI_SUPPORT +kmod-ath +@DRIVER_11N_SUPPORT +@DRIVER_11W_SUPPORT +@KERNEL_RELAY FILES:= \ $(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath10k/ath10k_core.ko \ $(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath10k/ath10k_pci.ko AUTOLOAD:=$(call AutoLoad,55,ath10k_core ath10k_pci) endef define KernelPackage/ath10k/description This module adds support for wireless adapters based on Atheros IEEE 802.11ac family of chipsets. For now only PCI is supported. endef #Broadcom firmware ifneq ($(CONFIG_B43_FW_6_30),) PKG_B43_FWV4_NAME:=broadcom-wl PKG_B43_FWV4_VERSION:=6.30.163.46 PKG_B43_FWV4_OBJECT:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION).wl_apsta.o PKG_B43_FWV4_SOURCE:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION).tar.bz2 PKG_B43_FWV4_SOURCE_URL:=http://www.lwfinger.com/b43-firmware/ PKG_B43_FWV4_MD5SUM:=6fe97e9368d25342a1ab943d3cf3496d else ifneq ($(CONFIG_B43_FW_5_10),) PKG_B43_FWV4_NAME:=broadcom-wl PKG_B43_FWV4_VERSION:=5.10.56.27.3 PKG_B43_FWV4_OBJECT:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION)/driver/wl_apsta/wl_prebuilt.o PKG_B43_FWV4_SOURCE:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION)_mipsel.tar.bz2 PKG_B43_FWV4_SOURCE_URL:=http://mirror2.openwrt.org/sources/ PKG_B43_FWV4_MD5SUM:=3363e3a6b3d9d73c49dea870c7834eac else ifneq ($(CONFIG_B43_FW_4_178),) PKG_B43_FWV4_NAME:=broadcom-wl PKG_B43_FWV4_VERSION:=4.178.10.4 PKG_B43_FWV4_OBJECT:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION)/linux/wl_apsta.o PKG_B43_FWV4_SOURCE:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION).tar.bz2 PKG_B43_FWV4_SOURCE_URL:=http://mirror2.openwrt.org/sources/ PKG_B43_FWV4_MD5SUM:=14477e8cbbb91b11896affac9b219fdb else ifneq ($(CONFIG_B43_FW_5_100_138),) PKG_B43_FWV4_NAME:=broadcom-wl PKG_B43_FWV4_VERSION:=5.100.138 PKG_B43_FWV4_OBJECT:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION)/linux/wl_apsta.o PKG_B43_FWV4_SOURCE:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION).tar.bz2 PKG_B43_FWV4_SOURCE_URL:=http://www.lwfinger.com/b43-firmware/ PKG_B43_FWV4_MD5SUM:=f4e357b09eaf5d8b1f1920cf3493a555 else PKG_B43_FWV4_NAME:=broadcom-wl PKG_B43_FWV4_VERSION:=4.150.10.5 PKG_B43_FWV4_OBJECT:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION)/driver/wl_apsta_mimo.o PKG_B43_FWV4_SOURCE:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION).tar.bz2 PKG_B43_FWV4_SOURCE_URL:=http://mirror2.openwrt.org/sources/ PKG_B43_FWV4_MD5SUM:=0c6ba9687114c6b598e8019e262d9a60 endif endif endif endif ifneq ($(CONFIG_B43_OPENFIRMWARE),) PKG_B43_FWV4_NAME:=broadcom-wl PKG_B43_FWV4_VERSION:=5.2 PKG_B43_FWV4_OBJECT:=openfwwf-$(PKG_B43_FWV4_VERSION) PKG_B43_FWV4_SOURCE:=openfwwf-$(PKG_B43_FWV4_VERSION).tar.gz PKG_B43_FWV4_SOURCE_URL:=http://www.ing.unibs.it/openfwwf/firmware/ PKG_B43_FWV4_MD5SUM:=e045a135453274e439ae183f8498b0fa endif define Download/b43 FILE:=$(PKG_B43_FWV4_SOURCE) URL:=$(PKG_B43_FWV4_SOURCE_URL) MD5SUM:=$(PKG_B43_FWV4_MD5SUM) endef $(eval $(call Download,b43)) define KernelPackage/b43 $(call KernelPackage/mac80211/Default) TITLE:=Broadcom 43xx wireless support URL:=https://wireless.wiki.kernel.org/en/users/drivers/b43 KCONFIG:= \ CONFIG_HW_RANDOM=y # Depend on PCI_SUPPORT to make sure we can select kmod-bcma or kmod-ssb DEPENDS += \ @PCI_SUPPORT +kmod-mac80211 \ $(if $(CONFIG_PACKAGE_B43_USE_SSB),+kmod-ssb) \ $(if $(CONFIG_PACKAGE_B43_USE_BCMA),+kmod-bcma) FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/broadcom/b43/b43.ko AUTOLOAD:=$(call AutoProbe,b43) MENU:=1 endef define KernelPackage/b43/config config PACKAGE_B43_USE_SSB select PACKAGE_kmod-ssb tristate depends on !TARGET_brcm47xx && !TARGET_brcm63xx default PACKAGE_kmod-b43 if PACKAGE_B43_BUSES_BCMA_AND_SSB default PACKAGE_kmod-b43 if PACKAGE_B43_BUSES_SSB config PACKAGE_B43_USE_BCMA select PACKAGE_kmod-bcma tristate depends on !TARGET_brcm47xx && !TARGET_bcm53xx default PACKAGE_kmod-b43 if PACKAGE_B43_BUSES_BCMA_AND_SSB default PACKAGE_kmod-b43 if PACKAGE_B43_BUSES_BCMA if PACKAGE_kmod-b43 choice prompt "b43 firmware version" default B43_FW_5_100_138 help This option allows you to select the version of the b43 firmware. config B43_FW_4_150 bool "Firmware 410.2160 from driver 4.150.10.5 (old stable)" help Old stable firmware for BCM43xx devices. If unsure, select this. config B43_FW_4_178 bool "Firmware 478.104 from driver 4.178.10.4" help Older firmware for BCM43xx devices. If unsure, select the "stable" firmware. config B43_FW_5_10 bool "Firmware 508.1084 from driver 5.10.56.27" help Older firmware for BCM43xx devices. If unsure, select the "stable" firmware. config B43_FW_5_100_138 bool "Firmware 666.2 from driver 5.100.138 (stable)" help The currently default firmware for BCM43xx devices. This firmware currently gets most of the testing and is needed for some N-PHY devices. If unsure, select the this firmware. config B43_FW_6_30 bool "Firmware 784.2 from driver 6.30.163.46 (experimental)" help Newer experimental firmware for BCM43xx devices. This firmware is mostly untested. If unsure, select the "stable" firmware. config B43_OPENFIRMWARE bool "Open FirmWare for WiFi networks" help Opensource firmware for BCM43xx devices. Do _not_ select this, unless you know what you are doing. The Opensource firmware is not suitable for embedded devices, yet. It does not support QoS, which is bad for AccessPoints. It does not support hardware crypto acceleration, which is a showstopper for embedded devices with low CPU resources. If unsure, select the "stable" firmware. endchoice config B43_FW_SQUASH bool "Remove unnecessary firmware files" depends on !B43_OPENFIRMWARE default y help This options allows you to remove unnecessary b43 firmware files from the final rootfs image. This can reduce the rootfs size by up to 200k. If unsure, say Y. config B43_FW_SQUASH_COREREVS string "Core revisions to include" depends on B43_FW_SQUASH default "5,6,7,8,9,10,11,13,15" if TARGET_brcm47xx_legacy default "16,28,29,30" if TARGET_brcm47xx_mips74k default "5,6,7,8,9,10,11,13,15,16,28,29,30" help This is a comma seperated list of core revision numbers. Example (keep files for rev5 only): 5 Example (keep files for rev5 and rev11): 5,11 config B43_FW_SQUASH_PHYTYPES string "PHY types to include" depends on B43_FW_SQUASH default "G,N,LP" if TARGET_brcm47xx_legacy default "N,HT" if TARGET_brcm47xx_mips74k default "G,N,LP,HT" help This is a comma seperated list of PHY types: A => A-PHY AG => Dual A-PHY G-PHY G => G-PHY LP => LP-PHY N => N-PHY HT => HT-PHY LCN => LCN-PHY LCN40 => LCN40-PHY AC => AC-PHY Example (keep files for G-PHY only): G Example (keep files for G-PHY and N-PHY): G,N choice prompt "Supported buses" default PACKAGE_B43_BUSES_BCMA_AND_SSB help This allows choosing buses that b43 should support. config PACKAGE_B43_BUSES_BCMA_AND_SSB depends on !TARGET_brcm47xx_legacy && !TARGET_brcm47xx_mips74k && !TARGET_bcm53xx bool "BCMA and SSB" config PACKAGE_B43_BUSES_BCMA depends on !TARGET_brcm47xx_legacy bool "BCMA only" config PACKAGE_B43_BUSES_SSB depends on !TARGET_brcm47xx_mips74k && !TARGET_bcm53xx bool "SSB only" endchoice config PACKAGE_B43_DEBUG bool "Enable debug output and debugfs for b43" default n help Enable additional debug output and runtime sanity checks for b43 and enables the debugfs interface. If unsure, say N. config PACKAGE_B43_PIO bool "Enable support for PIO transfer mode" default n help Enable support for using PIO instead of DMA. Unless you have DMA transfer problems you don't need this. If unsure, say N. config PACKAGE_B43_PHY_G bool "Enable support for G-PHYs" default n if TARGET_brcm47xx_mips74k default y help Enable support for G-PHY. This includes support for the following devices: PCI: BCM4306, BCM4311, BCM4318 SoC: BCM5352E, BCM4712 If unsure, say Y. config PACKAGE_B43_PHY_N bool "Enable support for N-PHYs" default y help Enable support for N-PHY. This includes support for the following devices: PCI: BCM4321, BCM4322, BCM43222, BCM43224, BCM43225 SoC: BCM4716, BCM4717, BCM4718 Currently only 11g speed is available. If unsure, say Y. config PACKAGE_B43_PHY_LP bool "Enable support for LP-PHYs" default n if TARGET_brcm47xx_mips74k default y help Enable support for LP-PHY. This includes support for the following devices: PCI: BCM4312 SoC: BCM5354 If unsure, say Y. config PACKAGE_B43_PHY_HT bool "Enable support for HT-PHYs" default n if TARGET_brcm47xx_legacy default y help Enable support for HT-PHY. This includes support for the following devices: PCI: BCM4331 Currently only 11g speed is available. If unsure, say Y. config PACKAGE_B43_PHY_LCN bool "Enable support for LCN-PHYs" depends on BROKEN default n help Currently broken. If unsure, say N. endif endef define KernelPackage/b43/description Kernel module for Broadcom 43xx wireless support (mac80211 stack) new endef define KernelPackage/b43legacy $(call KernelPackage/mac80211/Default) TITLE:=Broadcom 43xx-legacy wireless support URL:=https://wireless.wiki.kernel.org/en/users/drivers/b43 KCONFIG:= \ CONFIG_HW_RANDOM=y DEPENDS+= +kmod-mac80211 +!(TARGET_brcm47xx||TARGET_brcm63xx):kmod-ssb +b43legacy-firmware FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/broadcom/b43legacy/b43legacy.ko AUTOLOAD:=$(call AutoProbe,b43legacy) MENU:=1 endef define KernelPackage/b43legacy/description Kernel module for Broadcom 43xx-legacy wireless support (mac80211 stack) new endef define KernelPackage/brcmutil $(call KernelPackage/mac80211/Default) TITLE:=Broadcom IEEE802.11n common driver parts URL:=https://wireless.wiki.kernel.org/en/users/drivers/brcm80211 DEPENDS+=@PCI_SUPPORT||USB_SUPPORT FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/broadcom/brcm80211/brcmutil/brcmutil.ko AUTOLOAD:=$(call AutoProbe,brcmutil) MENU:=1 endef define KernelPackage/brcmutil/description This module contains some common parts needed by Broadcom Wireless drivers brcmsmac and brcmfmac. endef define KernelPackage/brcmutil/config if PACKAGE_kmod-brcmutil config PACKAGE_BRCM80211_DEBUG bool "Broadcom wireless driver debugging" help Say Y, if you want to debug brcmsmac and brcmfmac wireless driver. endif endef PKG_BRCMSMAC_FW_NAME:=broadcom-wl PKG_BRCMSMAC_FW_VERSION:=5.100.138 PKG_BRCMSMAC_FW_OBJECT:=$(PKG_BRCMSMAC_FW_NAME)-$(PKG_BRCMSMAC_FW_VERSION)/linux/wl_apsta.o PKG_BRCMSMAC_FW_SOURCE:=$(PKG_BRCMSMAC_FW_NAME)-$(PKG_BRCMSMAC_FW_VERSION).tar.bz2 PKG_BRCMSMAC_FW_SOURCE_URL:=http://www.lwfinger.com/b43-firmware/ PKG_BRCMSMAC_FW_MD5SUM:=f4e357b09eaf5d8b1f1920cf3493a555 define Download/brcmsmac FILE:=$(PKG_BRCMSMAC_FW_SOURCE) URL:=$(PKG_BRCMSMAC_FW_SOURCE_URL) MD5SUM:=$(PKG_BRCMSMAC_FW_MD5SUM) endef $(eval $(call Download,brcmsmac)) define KernelPackage/brcmsmac $(call KernelPackage/mac80211/Default) TITLE:=Broadcom IEEE802.11n PCIe SoftMAC WLAN driver URL:=https://wireless.wiki.kernel.org/en/users/drivers/brcm80211 DEPENDS+= +kmod-mac80211 +@DRIVER_11N_SUPPORT +!TARGET_brcm47xx:kmod-bcma +kmod-lib-cordic +kmod-lib-crc8 +kmod-brcmutil +!BRCMSMAC_USE_FW_FROM_WL:brcmsmac-firmware FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/broadcom/brcm80211/brcmsmac/brcmsmac.ko AUTOLOAD:=$(call AutoProbe,brcmsmac) MENU:=1 endef define KernelPackage/brcmsmac/description Kernel module for Broadcom IEEE802.11n PCIe Wireless cards endef define KernelPackage/brcmsmac/config if PACKAGE_kmod-brcmsmac config BRCMSMAC_USE_FW_FROM_WL bool "Use firmware extracted from broadcom proprietary driver" default y help Instead of using the official brcmsmac firmware a firmware version 666.2 extracted from the proprietary Broadcom driver is used. This is needed to get core rev 17 used in bcm4716 to work. If unsure, say Y. endif endef define KernelPackage/brcmfmac $(call KernelPackage/mac80211/Default) TITLE:=Broadcom IEEE802.11n USB FullMAC WLAN driver URL:=https://wireless.wiki.kernel.org/en/users/drivers/brcm80211 DEPENDS+= @USB_SUPPORT +kmod-cfg80211 +@DRIVER_11N_SUPPORT +kmod-brcmutil \ +BRCMFMAC_PCIE:brcmfmac-firmware-43602a1-pcie +BRCMFMAC_PCIE:brcmfmac-firmware-4366b1-pcie \ +BRCMFMAC_SDIO:kmod-mmc +BRCMFMAC_SDIO:brcmfmac-firmware-sdio \ +BRCMFMAC_USB:kmod-usb-core +BRCMFMAC_USB:brcmfmac-firmware-usb FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/broadcom/brcm80211/brcmfmac/brcmfmac.ko AUTOLOAD:=$(call AutoProbe,brcmfmac) endef define KernelPackage/brcmfmac/description Kernel module for Broadcom IEEE802.11n USB Wireless cards endef define KernelPackage/brcmfmac/config if PACKAGE_kmod-brcmfmac config BRCMFMAC_SDIO bool "Enable SDIO bus interface support" default y if TARGET_brcm2708 default n help Enable support for cards attached to an SDIO bus. Select this option only if you are sure that your board has a Broadcom wireless chip atacched to that bus. config BRCMFMAC_USB bool "Enable USB bus interface support" depends on USB_SUPPORT default y help Supported USB connected chipsets: BCM43235, BCM43236, BCM43238 (all in revision 3 only) BCM43143, BCM43242, BCM43566, BCM43569 config BRCMFMAC_PCIE bool "Enable PCIE bus interface support" depends on PCI_SUPPORT default y help Supported PCIe connected chipsets: BCM4354, BCM4356, BCM43567, BCM43570, BCM43602 endif endef define KernelPackage/carl9170 $(call KernelPackage/mac80211/Default) TITLE:=Driver for Atheros AR9170 USB sticks DEPENDS:=@USB_SUPPORT +kmod-mac80211 +kmod-ath +kmod-usb-core +kmod-input-core +@DRIVER_11N_SUPPORT +carl9170-firmware FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ath/carl9170/carl9170.ko AUTOLOAD:=$(call AutoProbe,carl9170) endef define KernelPackage/hermes $(call KernelPackage/mac80211/Default) TITLE:=Hermes 802.11b chipset support DEPENDS:=@PCI_SUPPORT||PCMCIA_SUPPORT +kmod-cfg80211 +@DRIVER_WEXT_SUPPORT +kmod-crypto-michael-mic FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intersil/orinoco/orinoco.ko AUTOLOAD:=$(call AutoProbe,orinoco) endef define KernelPackage/hermes/description Kernel support for Hermes 802.11b chipsets endef define KernelPackage/hermes-pci $(call KernelPackage/mac80211/Default) TITLE:=Intersil Prism 2.5 PCI support DEPENDS:=@PCI_SUPPORT +kmod-hermes FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intersil/orinoco/orinoco_pci.ko AUTOLOAD:=$(call AutoProbe,orinoco_pci) endef define KernelPackage/hermes-pci/description Kernel modules for Intersil Prism 2.5 PCI support endef define KernelPackage/hermes-plx $(call KernelPackage/mac80211/Default) TITLE:=PLX9052 based PCI adaptor DEPENDS:=@PCI_SUPPORT +kmod-hermes FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intersil/orinoco/orinoco_plx.ko AUTOLOAD:=$(call AutoProbe,orinoco_plx) endef define KernelPackage/hermes-plx/description Kernel modules for Hermes in PLX9052 based PCI adaptors endef define KernelPackage/hermes-pcmcia $(call KernelPackage/mac80211/Default) TITLE:=Hermes based PCMCIA adaptors DEPENDS:=@PCMCIA_SUPPORT +kmod-hermes @BROKEN FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intersil/orinoco/orinoco_cs.ko AUTOLOAD:=$(call AutoProbe,orinoco_cs) endef define KernelPackage/hermes-pcmcia/description Kernel modules for Hermes based PCMCIA adaptors endef define KernelPackage/iwlwifi $(call KernelPackage/mac80211/Default) DEPENDS:= +kmod-mac80211 @PCI_SUPPORT +@DRIVER_11N_SUPPORT +iwlwifi-firmware @!LINUX_3_18 TITLE:=Intel AGN Wireless support FILES:= \ $(PKG_BUILD_DIR)/drivers/net/wireless/intel/iwlwifi/iwlwifi.ko \ $(PKG_BUILD_DIR)/drivers/net/wireless/intel/iwlwifi/dvm/iwldvm.ko \ $(PKG_BUILD_DIR)/drivers/net/wireless/intel/iwlwifi/mvm/iwlmvm.ko AUTOLOAD:=$(call AutoProbe,iwlwifi iwldvm iwlmvm) MENU:=1 endef define KernelPackage/iwlwifi/description iwlwifi kernel module for Intel Wireless WiFi Link 6250AGN Adapter Intel 6000 Series Wi-Fi Adapters (6200AGN and 6300AGN) Intel WiFi Link 1000BGN Intel Wireless WiFi 5150AGN Intel Wireless WiFi 5100AGN, 5300AGN, and 5350AGN Intel 6005 Series Wi-Fi Adapters Intel 6030 Series Wi-Fi Adapters Intel Wireless WiFi Link 6150BGN 2 Adapter Intel 100 Series Wi-Fi Adapters (100BGN and 130BGN) Intel 2000 Series Wi-Fi Adapters Intel 7260 Wi-Fi Adapter Intel 3160 Wi-Fi Adapter Intel 7265 Wi-Fi Adapter Intel 8260 Wi-Fi Adapter Intel 3165 Wi-Fi Adapter endef define KernelPackage/iwlwifi/config if PACKAGE_kmod-iwlwifi config PACKAGE_IWLWIFI_DEBUG bool "Enable full debugging output in the iwlwifi driver" default n help This option will enable debug tracing output for the iwlwifi drivers This will result in the kernel module being ~100k larger. You can control which debug output is sent to the kernel log by setting the value in /sys/module/iwlwifi/parameters/debug This entry will only exist if this option is enabled. To set a value, simply echo an 8-byte hex value to the same file: % echo 0x43fff > /sys/module/iwlwifi/parameters/debug You can find the list of debug mask values in: drivers/net/wireless/intel/iwlwifi/iwl-debug.h If this is your first time using this driver, you should say Y here as the debug information can assist others in helping you resolve any problems you may encounter. config PACKAGE_IWLWIFI_DEBUGFS bool "iwlwifi debugfs support" depends on PACKAGE_MAC80211_DEBUGFS default n help Enable creation of debugfs files for the iwlwifi drivers. This is a low-impact option that allows getting insight into the driver's state at runtime. endif endef define KernelPackage/iwl-legacy $(call KernelPackage/mac80211/Default) DEPENDS:= +kmod-mac80211 @PCI_SUPPORT TITLE:=Intel legacy Wireless support FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intel/iwlegacy/iwlegacy.ko AUTOLOAD:=$(call AutoProbe,iwlegacy) endef define KernelPackage/iwl-legacy/description iwl-legacy kernel module for legacy Intel wireless support endef define KernelPackage/iwl3945 $(call KernelPackage/mac80211/Default) DEPENDS:= +kmod-mac80211 +kmod-iwl-legacy +iwl3945-firmware TITLE:=Intel iwl3945 Wireless support FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intel/iwlegacy/iwl3945.ko AUTOLOAD:=$(call AutoProbe,iwl3945) endef define KernelPackage/iwl3945/description iwl3945 kernel module for Intel 3945 support endef define KernelPackage/iwl4965 $(call KernelPackage/mac80211/Default) DEPENDS:= +kmod-mac80211 +kmod-iwl-legacy +@DRIVER_11N_SUPPORT +iwl4965-firmware TITLE:=Intel iwl4965 Wireless support FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intel/iwlegacy/iwl4965.ko AUTOLOAD:=$(call AutoProbe,iwl4965) endef define KernelPackage/iwl4965/description iwl4965 kernel module for Intel 4965 support endef define KernelPackage/lib80211 $(call KernelPackage/mac80211/Default) TITLE:=802.11 Networking stack DEPENDS:=+kmod-cfg80211 +kmod-crypto-hash FILES:= \ $(PKG_BUILD_DIR)/net/wireless/lib80211.ko \ $(PKG_BUILD_DIR)/net/wireless/lib80211_crypt_wep.ko \ $(PKG_BUILD_DIR)/net/wireless/lib80211_crypt_ccmp.ko \ $(PKG_BUILD_DIR)/net/wireless/lib80211_crypt_tkip.ko AUTOLOAD:=$(call AutoProbe, \ lib80211 \ lib80211_crypt_wep \ lib80211_crypt_ccmp \ lib80211_crypt_tkip \ ) endef define KernelPackage/lib80211/description Kernel modules for 802.11 Networking stack Includes: - lib80211 - lib80211_crypt_wep - lib80211_crypt_tkip - lib80211_crytp_ccmp endef define KernelPackage/libipw $(call KernelPackage/mac80211/Default) TITLE:=libipw for ipw2100 and ipw2200 DEPENDS:=@PCI_SUPPORT +kmod-crypto-michael-mic +kmod-lib80211 +kmod-cfg80211 +@DRIVER_WEXT_SUPPORT @!BIG_ENDIAN FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intel/ipw2x00/libipw.ko AUTOLOAD:=$(call AutoProbe,libipw) endef define KernelPackage/libipw/description Hardware independent IEEE 802.11 networking stack for ipw2100 and ipw2200. endef IPW2100_NAME:=ipw2100-fw IPW2100_VERSION:=1.3 define Download/ipw2100 URL:=http://bughost.org/firmware/ FILE:=$(IPW2100_NAME)-$(IPW2100_VERSION).tgz MD5SUM=46aa75bcda1a00efa841f9707bbbd113 endef $(eval $(call Download,ipw2100)) define KernelPackage/ipw2100 $(call KernelPackage/mac80211/Default) TITLE:=Intel IPW2100 driver DEPENDS:=@PCI_SUPPORT +kmod-libipw FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intel/ipw2x00/ipw2100.ko AUTOLOAD:=$(call AutoProbe,ipw2100) endef define KernelPackage/ipw2100/description Kernel support for Intel IPW2100 Includes: - ipw2100 endef IPW2200_NAME:=ipw2200-fw IPW2200_VERSION:=3.1 define Download/ipw2200 URL:=http://bughost.org/firmware/ FILE:=$(IPW2200_NAME)-$(IPW2200_VERSION).tgz MD5SUM=eaba788643c7cc7483dd67ace70f6e99 endef $(eval $(call Download,ipw2200)) define KernelPackage/ipw2200 $(call KernelPackage/mac80211/Default) TITLE:=Intel IPW2200 driver DEPENDS:=@PCI_SUPPORT +kmod-libipw FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intel/ipw2x00/ipw2200.ko AUTOLOAD:=$(call AutoProbe,ipw2200) endef define KernelPackage/ipw2200/description Kernel support for Intel IPW2200 Includes: - ipw2200 endef define KernelPackage/libertas-usb $(call KernelPackage/mac80211/Default) DEPENDS+= @USB_SUPPORT +kmod-cfg80211 +kmod-usb-core +kmod-lib80211 +@DRIVER_WEXT_SUPPORT +libertas-usb-firmware TITLE:=Marvell 88W8015 Wireless Driver FILES:= \ $(PKG_BUILD_DIR)/drivers/net/wireless/marvell/libertas/libertas.ko \ $(PKG_BUILD_DIR)/drivers/net/wireless/marvell/libertas/usb8xxx.ko AUTOLOAD:=$(call AutoProbe,libertas usb8xxx) endef define KernelPackage/libertas-sdio $(call KernelPackage/mac80211/Default) DEPENDS+= +kmod-cfg80211 +kmod-lib80211 +kmod-mmc +@DRIVER_WEXT_SUPPORT @!TARGET_uml +libertas-sdio-firmware TITLE:=Marvell 88W8686 Wireless Driver FILES:= \ $(PKG_BUILD_DIR)/drivers/net/wireless/marvell/libertas/libertas.ko \ $(PKG_BUILD_DIR)/drivers/net/wireless/marvell/libertas/libertas_sdio.ko AUTOLOAD:=$(call AutoProbe,libertas libertas_sdio) endef define KernelPackage/libertas-spi $(call KernelPackage/mac80211/Default) SUBMENU:=Wireless Drivers DEPENDS+= +kmod-cfg80211 +kmod-lib80211 +@DRIVER_WEXT_SUPPORT @!TARGET_uml +libertas-spi-firmware KCONFIG := \ CONFIG_SPI=y \ CONFIG_SPI_MASTER=y TITLE:=Marvell 88W8686 SPI Wireless Driver FILES:= \ $(PKG_BUILD_DIR)/drivers/net/wireless/marvell/libertas/libertas.ko \ $(PKG_BUILD_DIR)/drivers/net/wireless/marvell/libertas/libertas_spi.ko AUTOLOAD:=$(call AutoProbe,libertas libertas_spi) endef define KernelPackage/mac80211-hwsim $(call KernelPackage/mac80211/Default) TITLE:=mac80211 HW simulation device DEPENDS+= +kmod-mac80211 +@DRIVER_11N_SUPPORT FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/mac80211_hwsim.ko AUTOLOAD:=$(call AutoProbe,mac80211_hwsim) endef define KernelPackage/mt7601u $(call KernelPackage/mac80211/Default) TITLE:=MT7601U-based USB dongles Wireless Driver DEPENDS+= +kmod-mac80211 +@DRIVER_11N_SUPPORT @USB_SUPPORT +kmod-usb-core +mt7601u-firmware FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/mediatek/mt7601u/mt7601u.ko AUTOLOAD:=$(call AutoProbe,mt7601u) endef define KernelPackage/mwl8k $(call KernelPackage/mac80211/Default) TITLE:=Driver for Marvell TOPDOG 802.11 Wireless cards URL:=http://wireless.kernel.org/en/users/Drivers/mwl8k DEPENDS+= @PCI_SUPPORT +kmod-mac80211 +@DRIVER_11N_SUPPORT +mwl8k-firmware FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/marvell/mwl8k.ko AUTOLOAD:=$(call AutoProbe,mwl8k) endef define KernelPackage/mwl8k/description Kernel modules for Marvell TOPDOG 802.11 Wireless cards endef define KernelPackage/mwifiex-pcie $(call KernelPackage/mac80211/Default) TITLE:=Driver for Marvell 802.11n/802.11ac PCIe Wireless cards URL:=http://wireless.kernel.org/en/users/Drivers/mwifiex DEPENDS+= @PCI_SUPPORT +kmod-mac80211 +@DRIVER_11N_SUPPORT +mwifiex-pcie-firmware FILES:= \ $(PKG_BUILD_DIR)/drivers/net/wireless/marvell/mwifiex/mwifiex.ko \ $(PKG_BUILD_DIR)/drivers/net/wireless/marvell/mwifiex/mwifiex_pcie.ko AUTOLOAD:=$(call AutoProbe,mwifiex_pcie) endef define KernelPackage/mwifiex-pcie/description Kernel modules for Marvell 802.11n/802.11ac PCIe Wireless cards endef define KernelPackage/p54/Default $(call KernelPackage/mac80211/Default) TITLE:=Prism54 Drivers endef define KernelPackage/p54/description Kernel module for Prism54 chipsets (mac80211) endef define KernelPackage/p54-common $(call KernelPackage/p54/Default) DEPENDS+= @PCI_SUPPORT||@USB_SUPPORT||@TARGET_omap24xx +kmod-mac80211 +kmod-lib-crc-ccitt TITLE+= (COMMON) FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intersil/p54/p54common.ko endef define KernelPackage/p54-pci $(call KernelPackage/p54/Default) TITLE+= (PCI) DEPENDS+= @PCI_SUPPORT +kmod-p54-common +p54-pci-firmware FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intersil/p54/p54pci.ko AUTOLOAD:=$(call AutoProbe,p54pci) endef define KernelPackage/p54-usb $(call KernelPackage/p54/Default) TITLE+= (USB) DEPENDS+= @USB_SUPPORT +kmod-usb-core +kmod-p54-common +p54-usb-firmware FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intersil/p54/p54usb.ko AUTOLOAD:=$(call AutoProbe,p54usb) endef define KernelPackage/p54-spi $(call KernelPackage/p54/Default) TITLE+= (SPI) DEPENDS+= @TARGET_omap24xx +kmod-p54-common +p54-spi-firmware FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intersil/p54/p54spi.ko AUTOLOAD:=$(call AutoProbe,p54spi) endef define KernelPackage/rt2x00/Default $(call KernelPackage/mac80211/Default) TITLE:=Ralink Drivers for RT2x00 cards endef define KernelPackage/rt2x00-lib $(call KernelPackage/rt2x00/Default) DEPENDS+= @(PCI_SUPPORT||USB_SUPPORT||TARGET_ramips) +kmod-mac80211 +kmod-lib-crc-itu-t TITLE+= (LIB) FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2x00lib.ko MENU:=1 endef define KernelPackage/rt2x00-lib/config if PACKAGE_kmod-rt2x00-lib config PACKAGE_RT2X00_LIB_DEBUGFS bool "Enable rt2x00 debugfs support" depends on PACKAGE_MAC80211_DEBUGFS help Enable creation of debugfs files for the rt2x00 drivers. These debugfs files support both reading and writing of the most important register types of the rt2x00 hardware. config PACKAGE_RT2X00_DEBUG bool "Enable rt2x00 debug output" help Enable debugging output for all rt2x00 modules endif endef define KernelPackage/rt2x00-mmio $(call KernelPackage/rt2x00/Default) DEPENDS+= @(PCI_SUPPORT||TARGET_ramips) +kmod-rt2x00-lib +kmod-eeprom-93cx6 HIDDEN:=1 TITLE+= (MMIO) FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2x00mmio.ko endef define KernelPackage/rt2x00-pci $(call KernelPackage/rt2x00/Default) DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-mmio +kmod-rt2x00-lib HIDDEN:=1 TITLE+= (PCI) FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2x00pci.ko AUTOLOAD:=$(call AutoProbe,rt2x00pci) endef define KernelPackage/rt2x00-usb $(call KernelPackage/rt2x00/Default) DEPENDS+= @USB_SUPPORT +kmod-rt2x00-lib +kmod-usb-core HIDDEN:=1 TITLE+= (USB) FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2x00usb.ko AUTOLOAD:=$(call AutoProbe,rt2x00usb) endef define KernelPackage/rt2800-lib $(call KernelPackage/rt2x00/Default) DEPENDS+= @(PCI_SUPPORT||USB_SUPPORT||TARGET_ramips) +kmod-rt2x00-lib +kmod-lib-crc-ccitt +@DRIVER_11N_SUPPORT HIDDEN:=1 TITLE+= (rt2800 LIB) FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2800lib.ko endef define KernelPackage/rt2400-pci $(call KernelPackage/rt2x00/Default) DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-pci TITLE+= (RT2400 PCI) FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2400pci.ko AUTOLOAD:=$(call AutoProbe,rt2400pci) endef define KernelPackage/rt2500-pci $(call KernelPackage/rt2x00/Default) DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-pci TITLE+= (RT2500 PCI) FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2500pci.ko AUTOLOAD:=$(call AutoProbe,rt2500pci) endef define KernelPackage/rt2500-usb $(call KernelPackage/rt2x00/Default) DEPENDS+= @USB_SUPPORT +kmod-rt2x00-usb TITLE+= (RT2500 USB) FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2500usb.ko AUTOLOAD:=$(call AutoProbe,rt2500usb) endef define KernelPackage/rt2800-mmio $(call KernelPackage/rt2x00/Default) TITLE += (RT28xx/RT3xxx MMIO) DEPENDS += +kmod-rt2800-lib +kmod-rt2x00-mmio HIDDEN:=1 FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2800mmio.ko endef define KernelPackage/rt2800-soc $(call KernelPackage/rt2x00/Default) DEPENDS += @(TARGET_ramips_rt288x||TARGET_ramips_rt305x||TARGET_ramips_rt3883||TARGET_ramips_mt7620) +kmod-rt2800-mmio +kmod-rt2800-lib TITLE += (RT28xx/RT3xxx SoC) FILES := \ $(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2x00soc.ko \ $(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2800soc.ko AUTOLOAD:=$(call AutoProbe,rt2800soc) endef define KernelPackage/rt2800-pci $(call KernelPackage/rt2x00/Default) DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-pci +kmod-rt2800-lib +kmod-rt2800-mmio +rt2800-pci-firmware TITLE+= (RT2860 PCI) FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2800pci.ko AUTOLOAD:=$(call AutoProbe,rt2800pci) endef define KernelPackage/rt2800-usb $(call KernelPackage/rt2x00/Default) DEPENDS+= @USB_SUPPORT +kmod-rt2x00-usb +kmod-rt2800-lib +kmod-lib-crc-ccitt +rt2800-usb-firmware TITLE+= (RT2870 USB) FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2800usb.ko AUTOLOAD:=$(call AutoProbe,rt2800usb) endef define KernelPackage/rt61-pci $(call KernelPackage/rt2x00/Default) DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-pci +rt61-pci-firmware TITLE+= (RT2x61 PCI) FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt61pci.ko AUTOLOAD:=$(call AutoProbe,rt61pci) endef define KernelPackage/rt73-usb $(call KernelPackage/rt2x00/Default) DEPENDS+= @USB_SUPPORT +kmod-rt2x00-usb +rt73-usb-firmware TITLE+= (RT73 USB) FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt73usb.ko AUTOLOAD:=$(call AutoProbe,rt73usb) endef define KernelPackage/rtl818x/Default $(call KernelPackage/mac80211/Default) TITLE:=Realtek Drivers for RTL818x devices URL:=http://wireless.kernel.org/en/users/Drivers/rtl8187 DEPENDS+= +kmod-eeprom-93cx6 +kmod-mac80211 endef define KernelPackage/rtl8180 $(call KernelPackage/rtl818x/Default) DEPENDS+= @PCI_SUPPORT TITLE+= (RTL8180 PCI) FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtl818x/rtl8180/rtl818x_pci.ko AUTOLOAD:=$(call AutoProbe,rtl818x_pci) endef define KernelPackage/rtl8187 $(call KernelPackage/rtl818x/Default) DEPENDS+= @USB_SUPPORT +kmod-usb-core TITLE+= (RTL8187 USB) FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtl818x/rtl8187/rtl8187.ko AUTOLOAD:=$(call AutoProbe,rtl8187) endef define KernelPackage/rtlwifi/config config PACKAGE_RTLWIFI_DEBUG bool "Realtek wireless debugging" depends on PACKAGE_kmod-rtlwifi help Say Y, if you want to debug realtek wireless drivers. endef define KernelPackage/rtlwifi $(call KernelPackage/mac80211/Default) TITLE:=Realtek common driver part DEPENDS+= @(PCI_SUPPORT||USB_SUPPORT) +kmod-mac80211 +@DRIVER_11N_SUPPORT FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtlwifi/rtlwifi.ko HIDDEN:=1 endef define KernelPackage/rtlwifi-pci $(call KernelPackage/mac80211/Default) TITLE:=Realtek common driver part (PCI support) DEPENDS+= @PCI_SUPPORT +kmod-rtlwifi FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtlwifi/rtl_pci.ko AUTOLOAD:=$(call AutoProbe,rtl_pci) HIDDEN:=1 endef define KernelPackage/rtlwifi-usb $(call KernelPackage/mac80211/Default) TITLE:=Realtek common driver part (USB support) DEPENDS+= @USB_SUPPORT +kmod-usb-core +kmod-rtlwifi FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtlwifi/rtl_usb.ko AUTOLOAD:=$(call AutoProbe,rtl_usb) HIDDEN:=1 endef define KernelPackage/rtl8192c-common $(call KernelPackage/mac80211/Default) TITLE:=Realtek RTL8192CE/RTL8192CU common support module DEPENDS+= +kmod-rtlwifi FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtlwifi/rtl8192c/rtl8192c-common.ko HIDDEN:=1 endef define KernelPackage/rtl8192ce $(call KernelPackage/mac80211/Default) TITLE:=Realtek RTL8192CE/RTL8188CE support DEPENDS+= +kmod-rtlwifi-pci +kmod-rtl8192c-common +rtl8192ce-firmware FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/rtl8192ce.ko AUTOLOAD:=$(call AutoProbe,rtl8192ce) endef define KernelPackage/rtl8192se $(call KernelPackage/mac80211/Default) TITLE:=Realtek RTL8192SE/RTL8191SE support DEPENDS+= +kmod-rtlwifi-pci +rtl8192se-firmware FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtlwifi/rtl8192se/rtl8192se.ko AUTOLOAD:=$(call AutoProbe,rtl8192se) endef define KernelPackage/rtl8192de $(call KernelPackage/mac80211/Default) TITLE:=Realtek RTL8192DE/RTL8188DE support DEPENDS+= +kmod-rtlwifi-pci +rtl8192de-firmware FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtlwifi/rtl8192de/rtl8192de.ko AUTOLOAD:=$(call AutoProbe,rtl8192de) endef define KernelPackage/rtl8192cu $(call KernelPackage/mac80211/Default) TITLE:=Realtek RTL8192CU/RTL8188CU support DEPENDS+= +kmod-rtlwifi-usb +kmod-rtl8192c-common +rtl8192cu-firmware FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/rtl8192cu.ko AUTOLOAD:=$(call AutoProbe,rtl8192cu) endef define KernelPackage/rtl8xxxu $(call KernelPackage/mac80211/Default) TITLE:=alternative Realtek RTL8XXXU support DEPENDS+= @USB_SUPPORT +kmod-usb-core +kmod-mac80211 FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.ko AUTOLOAD:=$(call AutoProbe,rtl8xxxu) endef define KernelPackage/rtl8xxxu/description This is an alternative driver for various Realtek RTL8XXX parts written to utilize the Linux mac80211 stack. The driver is known to work with a number of RTL8723AU, RL8188CU, RTL8188RU, RTL8191CU, and RTL8192CU devices This driver is under development and has a limited feature set. In particular it does not yet support 40MHz channels and power management. However it should have a smaller memory footprint than the vendor drivers and benetifs from the in kernel mac80211 stack. It can coexist with drivers from drivers/staging/rtl8723au, drivers/staging/rtl8192u, and drivers/net/wireless/rtlwifi, but you will need to control which module you wish to load. RTL8XXXU_UNTESTED is enabled This option enables detection of Realtek 8723/8188/8191/8192 WiFi USB devices which have not been tested directly by the driver author or reported to be working by third parties. Please report your results! endef define KernelPackage/wlcore $(call KernelPackage/mac80211/Default) TITLE:=TI common driver part DEPENDS+= @TARGET_omap +kmod-mac80211 +@DRIVER_11N_SUPPORT FILES:= \ $(PKG_BUILD_DIR)/drivers/net/wireless/ti/wlcore/wlcore.ko \ $(PKG_BUILD_DIR)/drivers/net/wireless/ti/wlcore/wlcore_sdio.ko AUTOLOAD:=$(call AutoProbe,wlcore wlcore_sdio) endef define KernelPackage/wlcore/description This module contains some common parts needed by TI Wireless drivers. endef define KernelPackage/wl12xx $(call KernelPackage/mac80211/Default) TITLE:=Driver for TI WL12xx URL:=http://wireless.kernel.org/en/users/Drivers/wl12xx DEPENDS+= +kmod-wlcore +wl12xx-firmware FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ti/wl12xx/wl12xx.ko AUTOLOAD:=$(call AutoProbe,wl12xx) endef define KernelPackage/wl12xx/description Kernel modules for TI WL12xx endef define KernelPackage/wl18xx $(call KernelPackage/mac80211/Default) TITLE:=Driver for TI WL18xx URL:=http://wireless.kernel.org/en/users/Drivers/wl18xx DEPENDS+= +kmod-wlcore +wl18xx-firmware FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ti/wl18xx/wl18xx.ko AUTOLOAD:=$(call AutoProbe,wl18xx) endef define KernelPackage/wl18xx/description Kernel modules for TI WL18xx endef ZD1211FW_NAME:=zd1211-firmware ZD1211FW_VERSION:=1.4 define Download/zd1211rw FILE:=$(ZD1211FW_NAME)-$(ZD1211FW_VERSION).tar.bz2 URL:=@SF/zd1211/ MD5SUM:=19f28781d76569af8551c9d11294c870 endef $(eval $(call Download,zd1211rw)) define KernelPackage/zd1211rw $(call KernelPackage/mac80211/Default) TITLE:=Zydas ZD1211 support DEPENDS+= @USB_SUPPORT +kmod-usb-core +kmod-mac80211 FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/zydas/zd1211rw/zd1211rw.ko AUTOLOAD:=$(call AutoProbe,zd1211rw) endef config_package=$(if $(CONFIG_PACKAGE_kmod-$(1)),m) config-y:= \ WLAN \ NL80211_TESTMODE \ CFG80211_WEXT \ CFG80211_INTERNAL_REGDB \ CFG80211_CERTIFICATION_ONUS \ MAC80211_RC_MINSTREL \ MAC80211_RC_MINSTREL_HT \ MAC80211_RC_MINSTREL_VHT \ MAC80211_RC_DEFAULT_MINSTREL \ WLAN_VENDOR_ADMTEK \ WLAN_VENDOR_ATH \ WLAN_VENDOR_ATMEL \ WLAN_VENDOR_BROADCOM \ WLAN_VENDOR_CISCO \ WLAN_VENDOR_INTEL \ WLAN_VENDOR_INTERSIL \ WLAN_VENDOR_MARVELL \ WLAN_VENDOR_MEDIATEK \ WLAN_VENDOR_RALINK \ WLAN_VENDOR_REALTEK \ WLAN_VENDOR_RSI \ WLAN_VENDOR_ST \ WLAN_VENDOR_TI \ WLAN_VENDOR_ZYDAS \ config-$(call config_package,cfg80211) += CFG80211 config-$(call config_package,mac80211) += MAC80211 config-$(CONFIG_PACKAGE_MAC80211_MESH) += MAC80211_MESH ifdef CONFIG_PACKAGE_MAC80211_DEBUGFS config-y += \ CFG80211_DEBUGFS \ MAC80211_DEBUGFS \ ATH9K_DEBUGFS \ ATH9K_HTC_DEBUGFS \ ATH10K_DEBUGFS \ CARL9170_DEBUGFS \ ATH5K_DEBUG endif ifdef CONFIG_PACKAGE_MAC80211_TRACING config-y += \ ATH10K_TRACING \ ATH6KL_TRACING \ ATH_TRACEPOINTS \ WIL6210_TRACING \ ATH5K_TRACER \ IWLWIFI_DEVICE_TRACING endif config-$(call config_package,lib80211) += LIB80211 LIB80211_CRYPT_WEP LIB80211_CRYPT_CCMP LIB80211_CRYPT_TKIP config-$(call config_package,airo) += AIRO config-$(call config_package,ath) += ATH_CARDS ATH_COMMON config-$(CONFIG_PACKAGE_ATH_DEBUG) += ATH_DEBUG ATH10K_DEBUG ATH9K_STATION_STATISTICS config-$(CONFIG_PACKAGE_ATH_DFS) += ATH9K_DFS_CERTIFIED ATH10K_DFS_CERTIFIED config-$(call config_package,ath9k) += ATH9K config-$(call config_package,ath9k-common) += ATH9K_COMMON config-$(CONFIG_TARGET_ar71xx) += ATH9K_AHB config-$(CONFIG_PCI) += ATH9K_PCI config-$(CONFIG_ATH_USER_REGD) += ATH_USER_REGD config-$(CONFIG_ATH9K_SUPPORT_PCOEM) += ATH9K_PCOEM config-$(CONFIG_ATH9K_TX99) += ATH9K_TX99 config-$(call config_package,ath9k-htc) += ATH9K_HTC config-$(call config_package,ath10k) += ATH10K ATH10K_PCI config-$(call config_package,ath5k) += ATH5K ifdef CONFIG_TARGET_ath25 config-y += ATH5K_AHB else config-y += ATH5K_PCI endif config-$(call config_package,carl9170) += CARL9170 config-$(call config_package,b43) += B43 config-$(CONFIG_PACKAGE_B43_BUSES_BCMA_AND_SSB) += B43_BUSES_BCMA_AND_SSB config-$(CONFIG_PACKAGE_B43_BUSES_BCMA) += B43_BUSES_BCMA config-$(CONFIG_PACKAGE_B43_BUSES_SSB) += B43_BUSES_SSB config-$(CONFIG_PACKAGE_B43_PHY_G) += B43_PHY_G config-$(CONFIG_PACKAGE_B43_PHY_N) += B43_PHY_N config-$(CONFIG_PACKAGE_B43_PHY_LP) += B43_PHY_LP config-$(CONFIG_PACKAGE_B43_PHY_HT) += B43_PHY_HT config-$(CONFIG_PACKAGE_B43_PIO) += B43_PIO config-$(CONFIG_PACKAGE_B43_DEBUG) += B43_DEBUG config-$(call config_package,b43legacy) += B43LEGACY config-y += B43LEGACY_DMA_MODE config-$(call config_package,brcmutil) += BRCMUTIL config-$(call config_package,brcmsmac) += BRCMSMAC config-$(call config_package,brcmfmac) += BRCMFMAC config-$(CONFIG_BRCMFMAC_SDIO) += BRCMFMAC_SDIO config-$(CONFIG_BRCMFMAC_USB) += BRCMFMAC_USB config-$(CONFIG_BRCMFMAC_PCIE) += BRCMFMAC_PCIE config-$(CONFIG_PACKAGE_BRCM80211_DEBUG) += BRCMDBG config-$(call config_package,mac80211-hwsim) += MAC80211_HWSIM config-$(call config_package,mt7601u) += MT7601U config-y += WL_MEDIATEK config-$(call config_package,rt2x00-lib) += RT2X00 RT2X00_LIB config-$(call config_package,rt2x00-pci) += RT2X00_LIB_PCI config-$(call config_package,rt2x00-mmio) += RT2X00_LIB_MMIO config-$(call config_package,rt2x00-usb) += RT2X00_LIB_USB config-$(CONFIG_PACKAGE_RT2X00_LIB_DEBUGFS) += RT2X00_LIB_DEBUGFS config-$(CONFIG_PACKAGE_RT2X00_DEBUG) += RT2X00_DEBUG config-$(call config_package,rt2400-pci) += RT2400PCI config-$(call config_package,rt2500-pci) += RT2500PCI config-$(call config_package,rt2500-usb) += RT2500USB config-$(call config_package,rt61-pci) += RT61PCI config-$(call config_package,rt73-usb) += RT73USB config-$(call config_package,rt2800-lib) += RT2800_LIB config-$(call config_package,rt2800-soc) += RT2800SOC config-$(call config_package,rt2800-pci) += RT2800PCI config-y += RT2800PCI_RT33XX RT2800PCI_RT35XX RT2800PCI_RT53XX RT2800PCI_RT3290 config-$(call config_package,rt2800-usb) += RT2800USB config-y += RT2800USB_RT33XX RT2800USB_RT35XX RT2800USB_RT3573 RT2800USB_RT53XX RT2800USB_RT55XX RT2800USB_UNKNOWN config-$(call config_package,iwl-legacy) += IWLEGACY config-$(call config_package,iwl3945) += IWL3945 config-$(call config_package,iwl4965) += IWL4965 config-$(call config_package,iwlwifi) += IWLWIFI IWLDVM IWLMVM config-$(CONFIG_PACKAGE_IWLWIFI_DEBUG)+= IWLWIFI_DEBUG config-$(CONFIG_PACKAGE_IWLWIFI_DEBUGFS)+= IWLWIFI_DEBUGFS config-$(call config_package,libipw) += LIBIPW config-$(call config_package,ipw2100) += IPW2100 config-$(call config_package,ipw2200) += IPW2200 config-$(call config_package,p54-common) += P54_COMMON config-$(call config_package,p54-pci) += P54_PCI config-$(call config_package,p54-usb) += P54_USB config-$(call config_package,p54-spi) += P54_SPI config-$(call config_package,hermes) += HERMES config-$(call config_package,hermes-pci) += PCI_HERMES config-$(call config_package,hermes-plx) += PLX_HERMES config-$(call config_package,hermes-pcmcia) += PCMCIA_HERMES config-y += HERMES_PRISM config-$(call config_package,adm8211) += ADM8211 config-$(call config_package,libertas-sdio) += LIBERTAS LIBERTAS_SDIO config-$(call config_package,libertas-usb) += LIBERTAS LIBERTAS_USB config-$(call config_package,libertas-spi) += LIBERTAS LIBERTAS_SPI config-$(call config_package,mwl8k) += MWL8K config-$(call config_package,mwifiex-pcie) += MWIFIEX MWIFIEX_PCIE config-$(call config_package,rtl8180) += RTL8180 config-$(call config_package,rtl8187) += RTL8187 config-$(call config_package,wlcore) += WLCORE WLCORE_SDIO config-$(call config_package,wl12xx) += WL12XX config-$(call config_package,wl18xx) += WL18XX config-y += WL_TI WILINK_PLATFORM_DATA config-$(call config_package,zd1211rw) += ZD1211RW config-$(call config_package,rtlwifi) += RTL_CARDS RTLWIFI config-$(call config_package,rtlwifi-pci) += RTLWIFI_PCI config-$(call config_package,rtlwifi-usb) += RTLWIFI_USB config-$(call config_package,rtl8192c-common) += RTL8192C_COMMON config-$(call config_package,rtl8192ce) += RTL8192CE config-$(call config_package,rtl8192se) += RTL8192SE config-$(call config_package,rtl8192de) += RTL8192DE config-$(call config_package,rtl8192cu) += RTL8192CU config-$(CONFIG_PACKAGE_RTLWIFI_DEBUG) += RTLWIFI_DEBUG config-$(call config_package,rtl8xxxu) += RTL8XXXU config-y += RTL8XXXU_UNTESTED config-$(CONFIG_LEDS_TRIGGERS) += MAC80211_LEDS B43_LEDS B43LEGACY_LEDS MAKE_OPTS:= -C "$(PKG_BUILD_DIR)" \ CROSS_COMPILE="$(KERNEL_CROSS)" \ ARCH="$(LINUX_KARCH)" \ EXTRA_CFLAGS="-I$(PKG_BUILD_DIR)/include $(IREMAP_CFLAGS)" \ KLIB_BUILD="$(LINUX_DIR)" \ MODPROBE=true \ KLIB=$(TARGET_MODULES_DIR) \ KERNEL_SUBLEVEL=$(lastword $(subst ., ,$(KERNEL_PATCHVER))) \ KBUILD_LDFLAGS_MODULE_PREREQ= ifneq ($(findstring c,$(OPENWRT_VERBOSE)),) MAKE_OPTS += V=1 endif define ConfigVars $(subst $(space),,$(foreach opt,$(config-$(1)),CPTCFG_$(opt)=$(1) )) endef define mac80211_config $(call ConfigVars,m)$(call ConfigVars,y) endef $(eval $(call shexport,mac80211_config)) define Build/Prepare rm -rf $(PKG_BUILD_DIR) mkdir -p $(PKG_BUILD_DIR) $(PKG_UNPACK) $(Build/Patch) $(TAR) -C $(PKG_BUILD_DIR) -xzf $(DL_DIR)/$(IPW2100_NAME)-$(IPW2100_VERSION).tgz $(TAR) -C $(PKG_BUILD_DIR) -xzf $(DL_DIR)/$(IPW2200_NAME)-$(IPW2200_VERSION).tgz $(TAR) -C $(PKG_BUILD_DIR) -xjf $(DL_DIR)/$(ZD1211FW_NAME)-$(ZD1211FW_VERSION).tar.bz2 rm -rf \ $(PKG_BUILD_DIR)/include/linux/ssb \ $(PKG_BUILD_DIR)/include/linux/bcma \ $(PKG_BUILD_DIR)/include/net/bluetooth rm -f \ $(PKG_BUILD_DIR)/include/linux/cordic.h \ $(PKG_BUILD_DIR)/include/linux/crc8.h \ $(PKG_BUILD_DIR)/include/linux/eeprom_93cx6.h \ $(PKG_BUILD_DIR)/include/linux/wl12xx.h \ $(PKG_BUILD_DIR)/include/linux/spi/libertas_spi.h \ $(PKG_BUILD_DIR)/include/net/ieee80211.h \ $(PKG_BUILD_DIR)/backport-include/linux/bcm47xx_nvram.h echo 'compat-wireless-$(PKG_VERSION)-$(PKG_RELEASE)-$(REVISION)' > $(PKG_BUILD_DIR)/compat_version $(CP) ./files/regdb.txt $(PKG_BUILD_DIR)/net/wireless/db.txt endef ifneq ($(CONFIG_PACKAGE_kmod-cfg80211)$(CONFIG_PACKAGE_kmod-lib80211),) define Build/Compile/kmod rm -rf $(PKG_BUILD_DIR)/modules +$(MAKE) $(PKG_JOBS) $(MAKE_OPTS) modules endef endif define Build/Configure cmp $(PKG_BUILD_DIR)/include/linux/ath9k_platform.h $(LINUX_DIR)/include/linux/ath9k_platform.h cmp $(PKG_BUILD_DIR)/include/linux/ath5k_platform.h $(LINUX_DIR)/include/linux/ath5k_platform.h cmp $(PKG_BUILD_DIR)/include/linux/rt2x00_platform.h $(LINUX_DIR)/include/linux/rt2x00_platform.h endef define Build/Compile $(SH_FUNC) var2file "$(call shvar,mac80211_config)" $(PKG_BUILD_DIR)/.config $(MAKE) $(MAKE_OPTS) allnoconfig $(call Build/Compile/kmod) endef define Build/InstallDev mkdir -p \ $(1)/usr/include/mac80211 \ $(1)/usr/include/mac80211-backport \ $(1)/usr/include/mac80211/ath \ $(1)/usr/include/net/mac80211 $(CP) $(PKG_BUILD_DIR)/net/mac80211/*.h $(PKG_BUILD_DIR)/include/* $(1)/usr/include/mac80211/ $(CP) $(PKG_BUILD_DIR)/backport-include/* $(1)/usr/include/mac80211-backport/ $(CP) $(PKG_BUILD_DIR)/net/mac80211/rate.h $(1)/usr/include/net/mac80211/ $(CP) $(PKG_BUILD_DIR)/drivers/net/wireless/ath/*.h $(1)/usr/include/mac80211/ath/ rm -f $(1)/usr/include/mac80211-backport/linux/module.h endef define KernelPackage/b43/install rm -rf $(1)/lib/firmware/ ifeq ($(CONFIG_B43_OPENFIRMWARE),y) tar xzf "$(DL_DIR)/$(PKG_B43_FWV4_SOURCE)" -C "$(PKG_BUILD_DIR)" else tar xjf "$(DL_DIR)/$(PKG_B43_FWV4_SOURCE)" -C "$(PKG_BUILD_DIR)" endif $(INSTALL_DIR) $(1)/lib/firmware/ ifeq ($(CONFIG_B43_OPENFIRMWARE),y) $(MAKE) -C "$(PKG_BUILD_DIR)/$(PKG_B43_FWV4_OBJECT)/" $(INSTALL_DIR) $(1)/lib/firmware/b43-open/ $(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_B43_FWV4_OBJECT)/ucode5.fw $(1)/lib/firmware/b43-open/ucode5.fw $(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_B43_FWV4_OBJECT)/b0g0bsinitvals5.fw $(1)/lib/firmware/b43-open/b0g0bsinitvals5.fw $(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_B43_FWV4_OBJECT)/b0g0initvals5.fw $(1)/lib/firmware/b43-open/b0g0initvals5.fw else b43-fwcutter -w $(1)/lib/firmware/ $(PKG_BUILD_DIR)/$(PKG_B43_FWV4_OBJECT) endif ifneq ($(CONFIG_B43_FW_SQUASH),) b43-fwsquash.py "$(CONFIG_B43_FW_SQUASH_PHYTYPES)" "$(CONFIG_B43_FW_SQUASH_COREREVS)" "$(1)/lib/firmware/b43" endif endef define KernelPackage/brcmsmac/install $(INSTALL_DIR) $(1)/lib/firmware/brcm ifeq ($(CONFIG_BRCMSMAC_USE_FW_FROM_WL),y) tar xjf "$(DL_DIR)/$(PKG_BRCMSMAC_FW_SOURCE)" -C "$(PKG_BUILD_DIR)" b43-fwcutter --brcmsmac -w $(1)/lib/firmware/ $(PKG_BUILD_DIR)/$(PKG_BRCMSMAC_FW_OBJECT) endif endef define KernelPackage/cfg80211/install $(INSTALL_DIR) $(1)/lib/wifi $(1)/lib/netifd/wireless $(INSTALL_DATA) ./files/lib/wifi/mac80211.sh $(1)/lib/wifi $(INSTALL_BIN) ./files/lib/netifd/wireless/mac80211.sh $(1)/lib/netifd/wireless endef define KernelPackage/ipw2100/install $(INSTALL_DIR) $(1)/lib/firmware $(INSTALL_DATA) $(PKG_BUILD_DIR)/ipw2100-$(IPW2100_VERSION)*.fw $(1)/lib/firmware endef define KernelPackage/ipw2200/install $(INSTALL_DIR) $(1)/lib/firmware $(INSTALL_DATA) $(PKG_BUILD_DIR)/$(IPW2200_NAME)-$(IPW2200_VERSION)/ipw2200*.fw $(1)/lib/firmware endef define KernelPackage/zd1211rw/install $(INSTALL_DIR) $(1)/lib/firmware/zd1211 $(INSTALL_DATA) $(PKG_BUILD_DIR)/$(ZD1211FW_NAME)/zd1211* $(1)/lib/firmware/zd1211 endef $(eval $(call KernelPackage,adm8211)) $(eval $(call KernelPackage,airo)) $(eval $(call KernelPackage,ath)) $(eval $(call KernelPackage,ath10k)) $(eval $(call KernelPackage,ath5k)) $(eval $(call KernelPackage,ath9k)) $(eval $(call KernelPackage,ath9k-common)) $(eval $(call KernelPackage,ath9k-htc)) $(eval $(call KernelPackage,b43)) $(eval $(call KernelPackage,b43legacy)) $(eval $(call KernelPackage,brcmsmac)) $(eval $(call KernelPackage,brcmfmac)) $(eval $(call KernelPackage,brcmutil)) $(eval $(call KernelPackage,carl9170)) $(eval $(call KernelPackage,cfg80211)) $(eval $(call KernelPackage,hermes)) $(eval $(call KernelPackage,hermes-pci)) $(eval $(call KernelPackage,hermes-plx)) $(eval $(call KernelPackage,hermes-pcmcia)) $(eval $(call KernelPackage,iwlwifi)) $(eval $(call KernelPackage,iwl-legacy)) $(eval $(call KernelPackage,iwl4965)) $(eval $(call KernelPackage,iwl3945)) $(eval $(call KernelPackage,lib80211)) $(eval $(call KernelPackage,libertas-usb)) $(eval $(call KernelPackage,libertas-sdio)) $(eval $(call KernelPackage,libertas-spi)) $(eval $(call KernelPackage,libipw)) $(eval $(call KernelPackage,ipw2100)) $(eval $(call KernelPackage,ipw2200)) $(eval $(call KernelPackage,mac80211)) $(eval $(call KernelPackage,mac80211-hwsim)) $(eval $(call KernelPackage,mt7601u)) $(eval $(call KernelPackage,mwl8k)) $(eval $(call KernelPackage,mwifiex-pcie)) $(eval $(call KernelPackage,p54-common)) $(eval $(call KernelPackage,p54-pci)) $(eval $(call KernelPackage,p54-usb)) $(eval $(call KernelPackage,p54-spi)) $(eval $(call KernelPackage,rt2x00-lib)) $(eval $(call KernelPackage,rt2x00-mmio)) $(eval $(call KernelPackage,rt2x00-pci)) $(eval $(call KernelPackage,rt2x00-usb)) $(eval $(call KernelPackage,rt2800-lib)) $(eval $(call KernelPackage,rt2400-pci)) $(eval $(call KernelPackage,rt2500-pci)) $(eval $(call KernelPackage,rt2500-usb)) $(eval $(call KernelPackage,rt2800-mmio)) $(eval $(call KernelPackage,rt2800-soc)) $(eval $(call KernelPackage,rt2800-pci)) $(eval $(call KernelPackage,rt2800-usb)) $(eval $(call KernelPackage,rt61-pci)) $(eval $(call KernelPackage,rt73-usb)) $(eval $(call KernelPackage,rtl8180)) $(eval $(call KernelPackage,rtl8187)) $(eval $(call KernelPackage,rtlwifi)) $(eval $(call KernelPackage,rtlwifi-pci)) $(eval $(call KernelPackage,rtlwifi-usb)) $(eval $(call KernelPackage,rtl8192c-common)) $(eval $(call KernelPackage,rtl8192ce)) $(eval $(call KernelPackage,rtl8192se)) $(eval $(call KernelPackage,rtl8192de)) $(eval $(call KernelPackage,rtl8192cu)) $(eval $(call KernelPackage,rtl8xxxu)) $(eval $(call KernelPackage,wlcore)) $(eval $(call KernelPackage,wl12xx)) $(eval $(call KernelPackage,wl18xx)) $(eval $(call KernelPackage,zd1211rw))