DEVICE_VARS += DAP_SIGNATURE NETGEAR_BOARD_ID NETGEAR_HW_ID NETGEAR_KERNEL_MAGIC ROOTFS_SIZE DEVICE_VARS += SEAMA_SIGNATURE SEAMA_MTDBLOCK define Build/alfa-network-rootfs-header mkimage \ -A mips -O linux -T filesystem -C lzma -a 0 -e 0 \ -n 'RootfsImage' -d $@ $@.new @mv $@.new $@ endef define Build/append-md5sum-bin $(STAGING_DIR_HOST)/bin/mkhash md5 $@ | sed 's/../\\\\x&/g' |\ xargs echo -ne >> $@ endef define Build/mkwrggimg $(STAGING_DIR_HOST)/bin/mkwrggimg -b \ -i $@ -o $@.imghdr -d /dev/mtdblock/1 \ -m $(BOARDNAME) -s $(DAP_SIGNATURE) \ -v $(VERSION_DIST) -B $(REVISION) mv $@.imghdr $@ endef define Build/mkdapimg2 $(STAGING_DIR_HOST)/bin/mkdapimg2 \ -i $@ -o $@.new \ -s $(DAP_SIGNATURE) \ -v $(VERSION_DIST)-$(firstword $(subst +, ,$(firstword $(subst -, ,$(REVISION))))) \ -r Default \ $(if $(1),-k $(1)) mv $@.new $@ endef define Build/netgear-squashfs rm -rf $@.fs $@.squashfs mkdir -p $@.fs/image cp $@ $@.fs/image/uImage $(STAGING_DIR_HOST)/bin/mksquashfs-lzma \ $@.fs $@.squashfs \ -noappend -root-owned -be -b 65536 \ $(if $(SOURCE_DATE_EPOCH),-fixed-time $(SOURCE_DATE_EPOCH)) dd if=/dev/zero bs=1k count=1 >> $@.squashfs mkimage \ -A mips -O linux -T filesystem -C none \ -M $(NETGEAR_KERNEL_MAGIC) \ -a 0xbf070000 -e 0xbf070000 \ -n 'MIPS $(VERSION_DIST) Linux-$(LINUX_VERSION)' \ -d $@.squashfs $@ rm -rf $@.squashfs $@.fs endef define Build/netgear-uImage $(call Build/uImage,$(1) -M $(NETGEAR_KERNEL_MAGIC)) endef define Build/relocate-kernel rm -rf $@.relocate $(CP) ../../generic/image/relocate $@.relocate $(MAKE) -j1 -C $@.relocate KERNEL_ADDR=$(KERNEL_LOADADDR) CROSS_COMPILE=$(TARGET_CROSS) ( \ dd if=$@.relocate/loader.bin bs=32 conv=sync && \ perl -e '@s = stat("$@"); print pack("N", @s[7])' && \ cat "$@" \ ) > "$@.new" mv "$@.new" "$@" rm -rf $@.relocate endef define Build/teltonika-fw-fake-checksum # Teltonika U-Boot web based firmware upgrade/recovery routine compares # 16 bytes from md5sum1[16] field in TP-Link v1 header (offset: 76 bytes # from begin of the firmware file) with 16 bytes stored just before # 0xdeadc0de marker. Values are only compared, MD5 sum is not verified. let \ offs="$$(stat -c%s $@) - 20"; \ dd if=$@ bs=1 count=16 skip=76 |\ dd of=$@ bs=1 count=16 seek=$$offs conv=notrunc endef define Build/uImageHiWiFi # Field ih_name needs to start with "tw150v1" mkimage -A $(LINUX_KARCH) \ -O linux -T kernel \ -C $(1) -a $(KERNEL_LOADADDR) -e $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \ -n 'tw150v1 $(call toupper,$(LINUX_KARCH)) $(VERSION_DIST) Linux-$(LINUX_VERSION)' -d $@ $@.new @mv $@.new $@ endef define Build/wrgg-pad-rootfs $(STAGING_DIR_HOST)/bin/padjffs2 $(IMAGE_ROOTFS) -c 64 >>$@ endef define Device/ap121f DEVICE_TITLE := ALFA Network AP121F DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-storage -swconfig BOARDNAME := AP121F IMAGE_SIZE := 16064k CONSOLE := ttyATH0,115200 MTDPARTS := spi0.0:192k(u-boot)ro,64k(u-boot-env),64k(art)ro,-(firmware) SUPPORTED_DEVICES := ap121f IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \ append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE) endef TARGET_DEVICES += ap121f define Device/ap531b0 DEVICE_TITLE := Rockeetech AP531B0 DEVICE_PACKAGES := kmod-usb-core kmod-usb2 BOARDNAME := AP531B0 IMAGE_SIZE := 16000k MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro endef TARGET_DEVICES += ap531b0 define Device/ap90q DEVICE_TITLE := YunCore AP80Q/AP90Q BOARDNAME := AP90Q IMAGE_SIZE := 16000k MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)ro endef TARGET_DEVICES += ap90q define Device/ap91-5g DEVICE_TITLE := ALFA Network AP91-5G DEVICE_PACKAGES := rssileds -swconfig BOARDNAME := AP91-5G IMAGE_SIZE := 7744k KERNEL_SIZE := 1600k ROOTFS_SIZE := 6144k MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),6144k(rootfs),1600k(kernel),64k(config)ro,64k(art)ro,7744k@0x50000(firmware) IMAGES := sysupgrade.bin factory.bin IMAGE/factory.bin := append-rootfs | pad-rootfs |\ alfa-network-rootfs-header | append-kernel | check-size $$$$(IMAGE_SIZE) IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs |\ pad-to $$$$(ROOTFS_SIZE) | append-kernel | check-size $$$$(IMAGE_SIZE) endef define Device/arduino-yun DEVICE_TITLE := Arduino Yun DEVICE_PACKAGES := kmod-usb-core kmod-usb2 BOARDNAME := Yun IMAGE_SIZE := 15936k CONSOLE := ttyATH0,250000 MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),15936k(firmware),64k(nvram),64k(art)ro endef TARGET_DEVICES += arduino-yun define Device/bsb DEVICE_TITLE := Smart Electronics Black Swift board DEVICE_PACKAGES := kmod-usb-core kmod-usb2 BOARDNAME := BSB IMAGE_SIZE := 16000k CONSOLE := ttyATH0,115200 MTDPARTS := spi0.0:128k(u-boot)ro,64k(u-boot-env)ro,16128k(firmware),64k(art)ro endef TARGET_DEVICES += bsb define Device/carambola2 DEVICE_TITLE := 8devices Carambola2 DEVICE_PACKAGES := kmod-usb-core kmod-usb2 BOARDNAME := CARAMBOLA2 IMAGE_SIZE := 16000k CONSOLE := ttyATH0,115200 MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro endef TARGET_DEVICES += carambola2 define Device/cf-e316n-v2 DEVICE_TITLE := COMFAST CF-E316N v2 DEVICE_PACKAGES := -swconfig -uboot-envtools BOARDNAME := CF-E316N-V2 IMAGE_SIZE := 16192k MTDPARTS := spi0.0:64k(u-boot)ro,64k(art)ro,16192k(firmware),64k(art-backup)ro endef TARGET_DEVICES += cf-e316n-v2 define Device/cf-e320n-v2 $(Device/cf-e316n-v2) DEVICE_TITLE := COMFAST CF-E320N v2 DEVICE_PACKAGES += kmod-usb-core kmod-usb2 BOARDNAME := CF-E320N-V2 endef TARGET_DEVICES += cf-e320n-v2 define Device/cf-e355ac-v1 DEVICE_TITLE := COMFAST CF-E355AC v1 DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca988x-ct \ -swconfig -uboot-envtools BOARDNAME := CF-E355AC-V1 IMAGE_SIZE := 16192k MTDPARTS := spi0.0:64k(u-boot)ro,64k(art)ro,16192k(firmware),64k(art-backup)ro endef TARGET_DEVICES += cf-e355ac-v1 define Device/cf-e355ac-v2 $(Device/cf-e355ac-v1) DEVICE_TITLE := COMFAST CF-E355AC v2 DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca9888-ct \ -swconfig -uboot-envtools BOARDNAME := CF-E355AC-V2 endef TARGET_DEVICES += cf-e355ac-v2 define Device/cf-e375ac DEVICE_TITLE := COMFAST CF-E375AC DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca9888-ct \ -uboot-envtools BOARDNAME := CF-E375AC IMAGE_SIZE := 16000k MTDPARTS := spi0.0:256k(u-boot)ro,64k(art)ro,16000k(firmware),64k(art-backup)ro endef TARGET_DEVICES += cf-e375ac define Device/cf-e380ac-v1 DEVICE_TITLE := COMFAST CF-E380AC v1 DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca988x-ct \ -swconfig -uboot-envtools BOARDNAME := CF-E380AC-V1 IMAGE_SIZE := 16128k MTDPARTS := spi0.0:128k(u-boot)ro,64k(art)ro,16128k(firmware),64k(art-backup)ro endef TARGET_DEVICES += cf-e380ac-v1 define Device/cf-e380ac-v2 $(Device/cf-e380ac-v1) DEVICE_TITLE := COMFAST CF-E380AC v2 BOARDNAME := CF-E380AC-V2 IMAGE_SIZE := 16000k MTDPARTS := spi0.0:256k(u-boot)ro,64k(art)ro,16000k(firmware),64k(art-backup)ro endef TARGET_DEVICES += cf-e380ac-v2 define Device/cf-e385ac DEVICE_TITLE := COMFAST CF-E385AC DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca9984-ct \ -uboot-envtools BOARDNAME := CF-E385AC IMAGE_SIZE := 16000k MTDPARTS := spi0.0:256k(u-boot)ro,64k(art)ro,16000k(firmware),64k(art-backup)ro endef TARGET_DEVICES += cf-e385ac define Device/cf-e520n DEVICE_TITLE := COMFAST CF-E520N DEVICE_PACKAGES := kmod-usb-core kmod-usb2 -swconfig -uboot-envtools BOARDNAME := CF-E520N IMAGE_SIZE := 8000k MTDPARTS := spi0.0:64k(u-boot)ro,64k(art)ro,8000k(firmware),64k(art-backup)ro endef TARGET_DEVICES += cf-e520n define Device/cf-e530n $(Device/cf-e520n) DEVICE_TITLE := COMFAST CF-E530N BOARDNAME := CF-E530N endef TARGET_DEVICES += cf-e530n define Device/cpe505n DEVICE_TITLE := P&W CPE505N BOARDNAME := CPE505N IMAGE_SIZE := 16000k MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro endef TARGET_DEVICES += cpe505n define Device/cpe830 $(Device/ap90q) DEVICE_TITLE := YunCore CPE830 DEVICE_PACKAGES := rssileds BOARDNAME := CPE830 endef TARGET_DEVICES += cpe830 define Device/cpe870 DEVICE_TITLE := YunCore CPE870 DEVICE_PACKAGES := rssileds BOARDNAME := CPE870 IMAGE_SIZE := 7936k MTDPARTS := spi0.0:64k(u-boot)ro,64k(u-boot-env),7936k(firmware),64k(config)ro,64k(art)ro endef TARGET_DEVICES += cpe870 define Device/dragino2 BOARDNAME := DRAGINO2 CONSOLE := ttyATH0,115200 DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport DEVICE_TITLE := Dragino 2 (MS14) IMAGE_SIZE := 16000k MTDPARTS := spi0.0:256k(u-boot)ro,16000k(firmware),64k(config)ro,64k(art)ro endef TARGET_DEVICES += dragino2 define Device/e1700ac-v2-16M DEVICE_TITLE := Qxwlan E1700AC v2 (16MB flash) DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct kmod-usb-core \ kmod-usb2 kmod-usb-ledtrig-usbport BOARDNAME := E1700AC-V2 SUPPORTED_DEVICES := e1700ac-v2 IMAGE_SIZE := 15936k MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),64k(pri-data)ro,64k(art)ro,-(firmware) IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) |\ append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE) endef TARGET_DEVICES += e1700ac-v2-16M define Device/e1700ac-v2-8M $(Device/e1700ac-v2-16M) DEVICE_TITLE := Qxwlan E1700AC v2 (8MB flash) IMAGE_SIZE := 7744k endef TARGET_DEVICES += e1700ac-v2-8M define Device/e558-v2-16M DEVICE_TITLE := Qxwlan E558 v2 (16MB flash) DEVICE_PACKAGES := kmod-usb-core kmod-usb2 -swconfig BOARDNAME := E558-V2 SUPPORTED_DEVICES := e558-v2 IMAGE_SIZE := 15936k MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),64k(pri-data)ro,64k(art),-(firmware) IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) |\ append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE) endef TARGET_DEVICES += e558-v2-16M define Device/e558-v2-8M $(Device/e558-v2-16M) DEVICE_TITLE := Qxwlan E558 v2 (8MB flash) IMAGE_SIZE := 7744k endef TARGET_DEVICES += e558-v2-8M define Device/e600g-v2-16M DEVICE_TITLE := Qxwlan E600G v2 (16MB flash) DEVICE_PACKAGES := kmod-usb-core kmod-usb2 -swconfig BOARDNAME := E600G-V2 SUPPORTED_DEVICES := e600g-v2 IMAGE_SIZE := 15936k MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),64k(pri-data)ro,64k(art)ro,-(firmware) IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) |\ append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE) endef TARGET_DEVICES += e600g-v2-16M define Device/e600g-v2-8M $(Device/e600g-v2-16M) DEVICE_TITLE := Qxwlan E600G v2 (8MB flash) IMAGE_SIZE := 7744k endef TARGET_DEVICES += e600g-v2-8M define Device/e600gac-v2-16M DEVICE_TITLE := Qxwlan E600GAC v2 (16MB flash) DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9887-ct kmod-usb-core \ kmod-usb2 -swconfig BOARDNAME := E600GAC-V2 SUPPORTED_DEVICES := e600gac-v2 IMAGE_SIZE := 15936k MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),64k(pri-data)ro,64k(art)ro,-(firmware) IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) |\ append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE) endef TARGET_DEVICES += e600gac-v2-16M define Device/e600gac-v2-8M $(Device/e600gac-v2-16M) DEVICE_TITLE := Qxwlan E600GAC v2 (8MB flash) IMAGE_SIZE := 7744k endef TARGET_DEVICES += e600gac-v2-8M define Device/e750a-v4-16M DEVICE_TITLE := Qxwlan E750A v4 (16MB flash) DEVICE_PACKAGES := kmod-usb-core kmod-usb2 -swconfig BOARDNAME := E750A-V4 SUPPORTED_DEVICES := e750a-v4 IMAGE_SIZE := 15936k MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),64k(pri-data)ro,64k(art),-(firmware) IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) |\ append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE) endef TARGET_DEVICES += e750a-v4-16M define Device/e750a-v4-8M $(Device/e750a-v4-16M) DEVICE_TITLE := Qxwlan E750A v4 (8MB flash) IMAGE_SIZE := 7744k endef TARGET_DEVICES += e750a-v4-8M define Device/e750g-v8-16M DEVICE_TITLE := Qxwlan E750G v8 (16MB flash) DEVICE_PACKAGES := kmod-usb-core kmod-usb2 -swconfig BOARDNAME := E750G-V8 SUPPORTED_DEVICES := e750g-v8 IMAGE_SIZE := 15936k MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),64k(pri-data)ro,64k(art),-(firmware) IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) |\ append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE) endef TARGET_DEVICES += e750g-v8-16M define Device/e750g-v8-8M $(Device/e750g-v8-16M) DEVICE_TITLE := Qxwlan E750G v8 (8MB flash) IMAGE_SIZE := 7744k endef TARGET_DEVICES += e750g-v8-8M define Device/ew-balin DEVICE_TITLE := Embedded Wireless Balin Platform DEVICE_PACKAGES := kmod-usb-core kmod-usb-chipidea BOARDNAME := EW-BALIN IMAGE_SIZE := 16000k MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)ro endef TARGET_DEVICES += ew-balin define Device/ew-dorin $(Device/ew-balin) DEVICE_TITLE := Embedded Wireless Dorin Platform BOARDNAME := EW-DORIN CONSOLE := ttyATH0,115200 endef TARGET_DEVICES += ew-dorin define Device/ew-dorin-router $(Device/ew-dorin) DEVICE_TITLE := Embedded Wireless Dorin Router Platform BOARDNAME := EW-DORIN-ROUTER endef TARGET_DEVICES += ew-dorin-router define Device/rme-eg200 DEVICE_TITLE := eTactica EG-200 DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-ledtrig-oneshot \ kmod-usb-serial kmod-usb-serial-ftdi \ kmod-usb-storage \ kmod-fs-ext4 BOARDNAME := RME-EG200 IMAGE_SIZE := 16000k CONSOLE := ttyATH0,115200 MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro endef TARGET_DEVICES += rme-eg200 define Device/weio DEVICE_TITLE := WeIO DEVICE_PACKAGES := kmod-usb-core kmod-usb2 BOARDNAME := WEIO IMAGE_SIZE := 16000k CONSOLE := ttyATH0,115200 MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro endef TARGET_DEVICES += weio define Device/gl-ar150 DEVICE_TITLE := GL.iNet GL-AR150 DEVICE_PACKAGES := kmod-usb-core kmod-usb2 BOARDNAME := GL-AR150 IMAGE_SIZE := 16000k CONSOLE := ttyATH0,115200 MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro endef TARGET_DEVICES += gl-ar150 define Device/gl-ar300 DEVICE_TITLE := GL.iNet GL-AR300 DEVICE_PACKAGES := kmod-usb-core kmod-usb2 BOARDNAME := GL-AR300 IMAGE_SIZE := 16000k MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro endef TARGET_DEVICES += gl-ar300 define Device/gl-ar300m DEVICE_TITLE := GL.iNet GL-AR300M DEVICE_PACKAGES := kmod-usb-core kmod-usb2 BOARDNAME := GL-AR300M IMAGE_SIZE := 16000k MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)ro endef TARGET_DEVICES += gl-ar300m define Device/gl-ar750 DEVICE_TITLE := GL.iNet GL-AR750 DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9887-ct kmod-usb-core \ kmod-usb2 kmod-usb-storage BOARDNAME := GL-AR750 SUPPORTED_DEVICES := gl-ar750 IMAGE_SIZE := 16000k MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),64k(art)ro,-(firmware) IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \ append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE) endef TARGET_DEVICES += gl-ar750 define Device/gl-ar750s DEVICE_TITLE := GL.iNet GL-AR750S DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9887-ct kmod-usb-core \ kmod-usb2 kmod-usb-storage BOARDNAME := GL-AR750S SUPPORTED_DEVICES := gl-ar750s IMAGE_SIZE := 16000k MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),64k(art)ro,-(firmware) IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \ append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE) endef TARGET_DEVICES += gl-ar750s define Device/gl-domino DEVICE_TITLE := GL.iNet Domino Pi DEVICE_PACKAGES := kmod-usb-core kmod-usb2 BOARDNAME := DOMINO IMAGE_SIZE := 16000k CONSOLE := ttyATH0,115200 MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro endef TARGET_DEVICES += gl-domino define Device/gl-mifi DEVICE_TITLE := GL.iNet GL-MiFi DEVICE_PACKAGES := kmod-usb-core kmod-usb2 BOARDNAME := GL-MIFI IMAGE_SIZE := 16000k CONSOLE := ttyATH0,115200 MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro endef TARGET_DEVICES += gl-mifi define Device/gl-usb150 DEVICE_TITLE := GL.iNet GL-USB150 DEVICE_PACKAGES := -swconfig BOARDNAME := GL-USB150 IMAGE_SIZE := 16000k CONSOLE := ttyATH0,115200 MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro SUPPORTED_DEVICES := gl-usb150 IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \ append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE) endef TARGET_DEVICES += gl-usb150 define Device/lan-turtle $(Device/tplink-16mlzma) DEVICE_TITLE := Hak5 LAN Turtle DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-storage \ -kmod-ath9k -swconfig -uboot-envtools -wpad-basic BOARDNAME := LAN-TURTLE DEVICE_PROFILE := LANTURTLE TPLINK_HWID := 0x5348334c CONSOLE := ttyATH0,115200 IMAGES := sysupgrade.bin endef TARGET_DEVICES += lan-turtle define Device/lima DEVICE_TITLE := 8devices Lima DEVICE_PACKAGES := kmod-usb-core kmod-usb2 BOARDNAME := LIMA IMAGE_SIZE := 15616k MTDPARTS := spi0.0:256k(u-boot)ro,256k(u-boot-env)ro,256k(art)ro,-(firmware) endef TARGET_DEVICES += lima define Device/mr12 DEVICE_TITLE := Meraki MR12 DEVICE_PACKAGES := kmod-spi-gpio BOARDNAME := MR12 ROOTFS_SIZE := 13440k IMAGE_SIZE := 15680k MTDPARTS := spi0.0:256k(u-boot)ro,256k(u-boot-env)ro,13440k(rootfs),2240k(kernel),64k(mac),128k(art)ro,15680k@0x80000(firmware) IMAGE/kernel.bin := append-kernel IMAGE/rootfs.bin := append-rootfs | pad-rootfs IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | pad-to $$$$(ROOTFS_SIZE) | append-kernel | check-size $$$$(IMAGE_SIZE) IMAGES := kernel.bin rootfs.bin sysupgrade.bin endef TARGET_DEVICES += mr12 define Device/mr16 $(Device/mr12) DEVICE_TITLE := Meraki MR16 BOARDNAME := MR16 endef TARGET_DEVICES += mr16 define Device/dr342 DEVICE_TITLE := Wallys DR342 DEVICE_PACKAGES := kmod-usb-core kmod-usb2 -swconfig BOARDNAME := DR342 IMAGE_SIZE := 16000k MTDPARTS := spi0.0:192k(u-boot)ro,64k(u-boot-env),64k(partition-table)ro,16000k(firmware),64k(art)ro endef TARGET_DEVICES += dr342 define Device/dr344 DEVICE_TITLE := Wallys DR344 BOARDNAME := DR344 KERNEL_SIZE := 1408k ROOTFS_SIZE := 6336k IMAGE_SIZE := 7744k MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1408k(kernel),64k(nvram),64k(art)ro,7744k@0x50000(firmware) IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | pad-to $$$$(ROOTFS_SIZE) | append-kernel | check-size $$$$(IMAGE_SIZE) endef define Device/dr531 DEVICE_TITLE := Wallys DR531 DEVICE_PACKAGES := kmod-usb-core kmod-usb2 BOARDNAME := DR531 IMAGE_SIZE := 7808k MTDPARTS := spi0.0:192k(u-boot)ro,64k(u-boot-env),64k(partition-table)ro,7808k(firmware),64k(art)ro endef TARGET_DEVICES += dr531 define Device/wndr3700 DEVICE_TITLE := NETGEAR WNDR3700 DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport kmod-leds-wndr3700-usb BOARDNAME := WNDR3700 NETGEAR_KERNEL_MAGIC := 0x33373030 NETGEAR_BOARD_ID := WNDR3700 IMAGE_SIZE := 7680k MTDPARTS := spi0.0:320k(u-boot)ro,128k(u-boot-env)ro,7680k(firmware),64k(art)ro IMAGES := sysupgrade.bin factory.img factory-NA.img KERNEL := kernel-bin | patch-cmdline | lzma -d20 | netgear-uImage lzma IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | netgear-squashfs | append-rootfs | pad-rootfs IMAGE/sysupgrade.bin := $$(IMAGE/default) | check-size $$$$(IMAGE_SIZE) IMAGE/factory.img := $$(IMAGE/default) | netgear-dni | check-size $$$$(IMAGE_SIZE) IMAGE/factory-NA.img := $$(IMAGE/default) | netgear-dni NA | check-size $$$$(IMAGE_SIZE) endef TARGET_DEVICES += wndr3700 define Device/wndr3700v2 $(Device/wndr3700) DEVICE_TITLE := NETGEAR WNDR3700 v2 NETGEAR_BOARD_ID := WNDR3700v2 NETGEAR_KERNEL_MAGIC := 0x33373031 NETGEAR_HW_ID := 29763654+16+64 IMAGE_SIZE := 15872k MTDPARTS := spi0.0:320k(u-boot)ro,128k(u-boot-env)ro,15872k(firmware),64k(art)ro IMAGES := sysupgrade.bin factory.img endef TARGET_DEVICES += wndr3700v2 define Device/wndr3800 $(Device/wndr3700v2) DEVICE_TITLE := NETGEAR WNDR3800 NETGEAR_BOARD_ID := WNDR3800 NETGEAR_HW_ID := 29763654+16+128 endef TARGET_DEVICES += wndr3800 define Device/wndr3800ch $(Device/wndr3800) DEVICE_TITLE := NETGEAR WNDR3800 (Ch) NETGEAR_BOARD_ID := WNDR3800CH endef TARGET_DEVICES += wndr3800ch define Device/wndrmac $(Device/wndr3700v2) DEVICE_TITLE := NETGEAR WNDRMAC NETGEAR_BOARD_ID := WNDRMAC endef TARGET_DEVICES += wndrmac define Device/wndrmacv2 $(Device/wndr3800) DEVICE_TITLE := NETGEAR WNDRMAC v2 NETGEAR_BOARD_ID := WNDRMACv2 endef TARGET_DEVICES += wndrmacv2 define Device/cap324 DEVICE_TITLE := PowerCloud Systems CAP324 BOARDNAME := CAP324 DEVICE_PROFILE := CAP324 IMAGE_SIZE := 16000k MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro endef TARGET_DEVICES += cap324 define Device/cr3000 DEVICE_TITLE := PowerCloud Systems CR3000 BOARDNAME := CR3000 DEVICE_PROFILE := CR3000 IMAGE_SIZE := 7808k MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7808k(firmware),64k(art)ro endef TARGET_DEVICES += cr3000 define Device/cr5000 DEVICE_TITLE := PowerCloud Systems CR5000 DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport kmod-usb-core BOARDNAME := CR5000 DEVICE_PROFILE := CR5000 IMAGE_SIZE := 7808k MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7808k(firmware),64k(art)ro endef TARGET_DEVICES += cr5000 define Device/packet-squirrel $(Device/tplink-16mlzma) DEVICE_TITLE := Hak5 Packet Squirrel DEVICE_PACKAGES := kmod-usb-core kmod-usb2 \ -kmod-ath9k -swconfig -uboot-envtools -wpad-basic BOARDNAME := PACKET-SQUIRREL DEVICE_PROFILE := PACKETSQUIRREL TPLINK_HWID := 0x5351524c CONSOLE := ttyATH0,115200 IMAGES := sysupgrade.bin endef TARGET_DEVICES += packet-squirrel define Device/pqi-air-pen DEVICE_TITLE := PQI Air Pen DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-storage BOARDNAME := PQI-AIR-PEN IMAGE_SIZE := 7744k CONSOLE := ttyATH0,115200 MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(art)ro,64k(NVRAM)ro,7680k(firmware),64k(CONF) endef TARGET_DEVICES += pqi-air-pen define Device/antminer-s1 $(Device/tplink-8mlzma) DEVICE_TITLE := Antminer-S1 DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-crypto-manager kmod-i2c-gpio-custom kmod-usb-hid BOARDNAME := ANTMINER-S1 DEVICE_PROFILE := ANTMINERS1 TPLINK_HWID := 0x04440101 CONSOLE := ttyATH0,115200 endef TARGET_DEVICES += antminer-s1 define Device/antminer-s3 $(Device/tplink-8mlzma) DEVICE_TITLE := Antminer-S3 DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-crypto-manager kmod-i2c-gpio-custom kmod-usb-hid BOARDNAME := ANTMINER-S3 DEVICE_PROFILE := ANTMINERS3 TPLINK_HWID := 0x04440301 CONSOLE := ttyATH0,115200 endef TARGET_DEVICES += antminer-s3 define Device/antrouter-r1 $(Device/tplink-8mlzma) DEVICE_TITLE := Antrouter-R1 DEVICE_PACKAGES := kmod-usb-core kmod-usb2 BOARDNAME := ANTROUTER-R1 DEVICE_PROFILE := ANTROUTERR1 TPLINK_HWID := 0x44440101 CONSOLE := ttyATH0,115200 endef TARGET_DEVICES += antrouter-r1 define Device/el-m150 $(Device/tplink-8mlzma) DEVICE_TITLE := EasyLink EL-M150 DEVICE_PACKAGES := kmod-usb-core kmod-usb2 BOARDNAME := EL-M150 DEVICE_PROFILE := ELM150 TPLINK_HWID := 0x01500101 CONSOLE := ttyATH0,115200 endef TARGET_DEVICES += el-m150 define Device/el-mini $(Device/tplink-8mlzma) DEVICE_TITLE := EasyLink EL-MINI DEVICE_PACKAGES := kmod-usb-core kmod-usb2 BOARDNAME := EL-MINI DEVICE_PROFILE := ELMINI TPLINK_HWID := 0x01530001 CONSOLE := ttyATH0,115200 endef TARGET_DEVICES += el-mini define Device/gl-inet-6408A-v1 $(Device/tplink-8mlzma) DEVICE_TITLE := GL.iNet 6408 DEVICE_PACKAGES := kmod-usb-core kmod-usb2 BOARDNAME := GL-INET DEVICE_PROFILE := GLINET TPLINK_HWID := 0x08000001 CONSOLE := ttyATH0,115200 endef TARGET_DEVICES += gl-inet-6408A-v1 define Device/gl-inet-6416A-v1 $(Device/tplink-16mlzma) DEVICE_TITLE := GL.iNet 6416 DEVICE_PACKAGES := kmod-usb-core kmod-usb2 BOARDNAME := GL-INET DEVICE_PROFILE := GLINET TPLINK_HWID := 0x08000001 CONSOLE := ttyATH0,115200 endef TARGET_DEVICES += gl-inet-6416A-v1 define Device/jwap230 DEVICE_TITLE := jjPlus JWAP230 DEVICE_PACKAGES := kmod-usb-core kmod-usb2 BOARDNAME := JWAP230 IMAGE_SIZE := 16000k MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)ro endef TARGET_DEVICES += jwap230 define Device/koala DEVICE_TITLE := OCEDO Koala BOARDNAME := KOALA DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct IMAGE_SIZE := 7424k MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),7424k(firmware),1536k(kernel2),5888k(rootfs2),1088k(data)ro,64k(id)ro,64k(art)ro endef TARGET_DEVICES += koala define Device/r36a DEVICE_TITLE := ALFA Network R36A DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport -swconfig BOARDNAME := R36A SUPPORTED_DEVICES := r36a IMAGE_SIZE := 15872k MTDPARTS := spi0.0:384k(u-boot)ro,64k(u-boot-env),64k(art)ro,-(firmware) IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \ append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE) endef TARGET_DEVICES += r36a define Device/r602n DEVICE_TITLE := P&W R602N DEVICE_PACKAGES := kmod-usb-core kmod-usb2 BOARDNAME := R602N IMAGE_SIZE := 16000k MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro endef TARGET_DEVICES += r602n define Device/rut900 DEVICE_TITLE := Teltonika RUT900 DEVICE_PACKAGES := kmod-usb-core kmod-usb2 -uboot-envtools BOARDNAME := RUT900 SUPPORTED_DEVICES := rut900 IMAGE_SIZE := 15552k MTDPARTS := spi0.0:128k(u-boot)ro,64k(config)ro,64k(art)ro,15552k(firmware),576k(event-log)ro TPLINK_HWID := 0x35000001 TPLINK_HWREV := 0x1 TPLINK_HEADER_VERSION := 1 KERNEL := kernel-bin | patch-cmdline | lzma | tplink-v1-header KERNEL_INITRAMFS := kernel-bin | patch-cmdline | lzma | uImage lzma IMAGES := sysupgrade.bin factory.bin IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs |\ pad-rootfs | teltonika-fw-fake-checksum | append-string master |\ append-md5sum-bin | check-size $$$$(IMAGE_SIZE) IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) |\ append-rootfs | pad-rootfs | append-metadata |\ check-size $$$$(IMAGE_SIZE) endef TARGET_DEVICES += rut900 define Device/mc-mac1200r $(Device/tplink-8mlzma) DEVICE_TITLE := Mercury MAC1200R DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct BOARDNAME := MC-MAC1200R DEVICE_PROFILE := MAC1200R TPLINK_HWID := 0x12000001 endef TARGET_DEVICES += mc-mac1200r define Device/minibox-v1 $(Device/tplink-16mlzma) DEVICE_TITLE := GainStrong MiniBox V1.0 DEVICE_PACKAGES := kmod-usb-core kmod-usb2 BOARDNAME := MINIBOX-V1 DEVICE_PROFILE := MINIBOXV1 TPLINK_HWID := 0x3C000201 CONSOLE := ttyATH0,115200 IMAGES := sysupgrade.bin endef TARGET_DEVICES += minibox-v1 define Device/minibox-v3.2 $(Device/tplink-16mlzma) DEVICE_TITLE := Gainstrong MiniBox V3.2 DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k-ct ath10k-firmware-qca9887-ct -swconfig BOARDNAME := MINIBOX-V3.2 DEVICE_PROFILE := MINIBOXV32 TPLINK_HWID := 0x3C00010C endef TARGET_DEVICES += minibox-v3.2 define Device/oolite-v1 $(Device/minibox-v1) DEVICE_TITLE := GainStrong Oolite V1.0 BOARDNAME := OOLITE-V1 DEVICE_PROFILE := OOLITEV1 TPLINK_HWID := 0x3C000101 endef TARGET_DEVICES += oolite-v1 define Device/oolite-v5.2 $(Device/tplink-16mlzma) DEVICE_TITLE := GainStrong Oolite V5.2 DEVICE_PACKAGES := ath10k-firmware-qca9887-ct kmod-ath10k-ct kmod-usb-core kmod-usb2 BOARDNAME := OOLITE-V5-2 DEVICE_PROFILE := OOLITEV52 TPLINK_HWID := 0x3C00010B IMAGES := sysupgrade.bin endef TARGET_DEVICES += oolite-v5.2 define Device/oolite-v5.2-dev $(Device/oolite-v5.2) DEVICE_TITLE := GainStrong Oolite V5.2-Dev (development board) BOARDNAME := OOLITE-V5-2-DEV DEVICE_PROFILE := OOLITEV52DEV endef TARGET_DEVICES += oolite-v5.2-dev define Device/omy-g1 $(Device/tplink-16mlzma) DEVICE_TITLE := OMYlink OMY-G1 DEVICE_PACKAGES := kmod-usb-core kmod-usb2 BOARDNAME := OMY-G1 DEVICE_PROFILE := OMYG1 TPLINK_HWID := 0x06660101 endef TARGET_DEVICES += omy-g1 define Device/omy-x1 $(Device/tplink-8mlzma) DEVICE_TITLE := OMYlink OMY-X1 BOARDNAME := OMY-X1 DEVICE_PROFILE := OMYX1 TPLINK_HWID := 0x06660201 endef TARGET_DEVICES += omy-x1 define Device/onion-omega $(Device/tplink-16mlzma) DEVICE_TITLE := Onion Omega DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-storage kmod-i2c-core kmod-i2c-gpio-custom kmod-spi-bitbang kmod-spi-dev kmod-spi-gpio kmod-spi-gpio-custom kmod-usb-serial BOARDNAME := ONION-OMEGA DEVICE_PROFILE := OMEGA TPLINK_HWID := 0x04700001 CONSOLE := ttyATH0,115200 endef TARGET_DEVICES += onion-omega define Device/sc1750 DEVICE_TITLE := Abicom SC1750 DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport BOARDNAME := SC1750 IMAGE_SIZE := 15744k MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),15744k(firmware),128k(APConfig),128k(kplog),64k(ART) endef TARGET_DEVICES += sc1750 define Device/sc300m DEVICE_TITLE := Abicom SC300M DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport BOARDNAME := SC300M IMAGE_SIZE := 15744k MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),15744k(firmware),128k(APConfig),128k(kplog),64k(ART) endef TARGET_DEVICES += sc300m define Device/sc450 DEVICE_TITLE := Abicom SC450 DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport BOARDNAME := SC450 IMAGE_SIZE := 15744k MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),15744k(firmware),128k(APConfig),128k(kplog),64k(ART) endef TARGET_DEVICES += sc450 define Device/smart-300 $(Device/tplink-8mlzma) DEVICE_TITLE := NC-LINK SMART-300 BOARDNAME := SMART-300 DEVICE_PROFILE := SMART-300 TPLINK_HWID := 0x93410001 endef TARGET_DEVICES += smart-300 define Device/som9331 $(Device/tplink-8mlzma) DEVICE_TITLE := OpenEmbed SOM9331 DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-storage kmod-i2c-core kmod-i2c-gpio-custom kmod-spi-bitbang kmod-spi-dev kmod-spi-gpio kmod-spi-gpio-custom kmod-usb-serial BOARDNAME := SOM9331 DEVICE_PROFILE := SOM9331 TPLINK_HWID := 0x04800054 CONSOLE := ttyATH0,115200 endef TARGET_DEVICES += som9331 define Device/sr3200 DEVICE_TITLE := YunCore SR3200 DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca988x-ct BOARDNAME := SR3200 IMAGE_SIZE := 16000k MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)ro endef TARGET_DEVICES += sr3200 define Device/xd3200 $(Device/sr3200) DEVICE_TITLE := YunCore XD3200 DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct BOARDNAME := XD3200 endef TARGET_DEVICES += xd3200 define Device/t830 DEVICE_TITLE := YunCore T830 DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport BOARDNAME := T830 IMAGE_SIZE := 16000k MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)ro SUPPORTED_DEVICES := t830 IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) |\ append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE) endef TARGET_DEVICES += t830 define Device/tellstick-znet-lite $(Device/tplink-16mlzma) DEVICE_TITLE := TellStick ZNet Lite DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-acm kmod-usb-serial kmod-usb-serial-pl2303 BOARDNAME := TELLSTICK-ZNET-LITE DEVICE_PROFILE := TELLSTICKZNETLITE TPLINK_HWID := 0x00726001 CONSOLE := ttyATH0,115200 endef TARGET_DEVICES += tellstick-znet-lite define Device/ts-d084 $(Device/tplink-8mlzma) DEVICE_TITLE := PISEN TS-D084 DEVICE_PACKAGES := kmod-usb-core kmod-usb2 BOARDNAME := TS-D084 DEVICE_PROFILE := TSD084 TPLINK_HWID := 0x07030101 CONSOLE := ttyATH0,115200 endef TARGET_DEVICES += ts-d084 define Device/n5q DEVICE_TITLE := ALFA Network N5Q DEVICE_PACKAGES := rssileds -swconfig BOARDNAME := N5Q SUPPORTED_DEVICES := n5q IMAGE_SIZE := 15872k MTDPARTS := spi0.0:384k(u-boot)ro,64k(u-boot-env),64k(art)ro,-(firmware) IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \ append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE) endef TARGET_DEVICES += n5q define Device/NBG6616 DEVICE_TITLE := ZyXEL NBG6616 DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport kmod-usb-storage kmod-rtc-pcf8563 kmod-ath10k-ct ath10k-firmware-qca988x-ct BOARDNAME := NBG6616 KERNEL_SIZE := 2048k IMAGE_SIZE := 15323k MTDPARTS := spi0.0:192k(u-boot)ro,64k(env)ro,64k(RFdata)ro,384k(zyxel_rfsd),384k(romd),64k(header),2048k(kernel),13184k(rootfs),15232k@0x120000(firmware) CMDLINE += mem=128M RAS_BOARD := NBG6616 RAS_ROOTFS_SIZE := 14464k RAS_VERSION := "$(VERSION_DIST) $(REVISION)" IMAGES := factory.bin sysupgrade.bin KERNEL := kernel-bin | patch-cmdline | lzma | uImage lzma | jffs2 boot/vmlinux.lzma.uImage IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | pad-to 64k | check-size $$$$(IMAGE_SIZE) | zyxel-ras-image IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) # We cannot currently build a factory image. It is the sysupgrade image # prefixed with a header (which is actually written into the MTD device). # The header is 2kiB and is filled with 0xff. The format seems to be: # 2 bytes: 0x0000 # 2 bytes: checksum of the data partition (big endian) # 4 bytes: length of the contained image file (big endian) # 32 bytes: Firmware Version string (NUL terminated, 0xff padded) # 2 bytes: 0x0000 # 2 bytes: checksum over the header partition (big endian) # 32 bytes: Model (e.g. "NBG6616", NUL termiated, 0xff padded) # rest: 0xff padding # # The checksums are calculated by adding up all bytes and if a 16bit # overflow occurs, one is added and the sum is masked to 16 bit: # csum = csum + databyte; if (csum > 0xffff) { csum += 1; csum &= 0xffff }; # Should the file have an odd number of bytes then the byte len-0x800 is # used additionally. # The checksum for the header is calcualted over the first 2048 bytes with # the firmware checksum as the placeholder during calculation. # # The header is padded with 0xff to the erase block size of the device. endef TARGET_DEVICES += NBG6616 define Device/c-55 DEVICE_TITLE := AirTight Networks C-55 DEVICE_PACKAGES := kmod-ath9k BOARDNAME := C-55 KERNEL_SIZE := 2048k IMAGE_SIZE := 15872k MTDPARTS := spi0.0:256k(u-boot)ro,128k(u-boot-env)ro,2048k(kernel),13824k(rootfs),13824k(opt)ro,2624k(failsafe)ro,64k(art)ro,15872k@0x60000(firmware) IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) endef TARGET_DEVICES += c-55 define Device/hiwifi-hc6361 DEVICE_TITLE := HiWiFi HC6361 DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-storage \ kmod-fs-ext4 kmod-nls-iso8859-1 e2fsprogs BOARDNAME := HiWiFi-HC6361 DEVICE_PROFILE := HIWIFI_HC6361 IMAGE_SIZE := 16128k KERNEL := kernel-bin | patch-cmdline | lzma | uImageHiWiFi lzma CONSOLE := ttyATH0,115200 MTDPARTS := spi0.0:64k(u-boot)ro,64k(bdinfo)ro,16128k(firmware),64k(backup)ro,64k(art)ro endef TARGET_DEVICES += hiwifi-hc6361 define Device/seama LOADER_TYPE := bin BLOCKSIZE := 64k KERNEL := kernel-bin | patch-cmdline | relocate-kernel | lzma KERNEL_INITRAMFS := kernel-bin | patch-cmdline | lzma | seama KERNEL_INITRAMFS_SUFFIX = $$(KERNEL_SUFFIX).seama SEAMA_MTDBLOCK := 1 IMAGES := sysupgrade.bin factory.bin # 64 bytes offset: # - 28 bytes seama_header # - 36 bytes of META data (4-bytes aligned) IMAGE/default := append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | append-rootfs IMAGE/sysupgrade.bin := \ $$(IMAGE/default) | seama | pad-rootfs | \ check-size $$$$(IMAGE_SIZE) IMAGE/factory.bin := \ $$(IMAGE/default) | seama | pad-rootfs | \ seama-seal | check-size $$$$(IMAGE_SIZE) SEAMA_SIGNATURE := endef define Device/dir-869-a1 $(Device/seama) DEVICE_TITLE := D-Link DIR-869 rev. A1 DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct BOARDNAME := DIR-869-A1 IMAGE_SIZE := 15872k MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(devdata)ro,64k(devconf)ro,15872k(firmware),64k(radiocfg)ro SEAMA_SIGNATURE := wrgac54_dlink.2015_dir869 IMAGE/factory.bin := \ $$(IMAGE/default) | pad-rootfs -x 64 | \ seama | seama-seal -m "signature=$$$$(SEAMA_SIGNATURE)" | \ check-size $$$$(IMAGE_SIZE) endef TARGET_DEVICES += dir-869-a1 define Device/mynet-n600 $(Device/seama) DEVICE_TITLE := Western Digital My Net N600 DEVICE_PACKAGES := kmod-usb-core kmod-usb2 BOARDNAME := MYNET-N600 IMAGE_SIZE := 15808k MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(devdata)ro,64k(devconf)ro,15872k(firmware),64k(radiocfg)ro SEAMA_SIGNATURE := wrgnd16_wd_db600 endef TARGET_DEVICES += mynet-n600 define Device/mynet-n750 $(Device/seama) DEVICE_TITLE := Western Digital My Net N750 DEVICE_PACKAGES := kmod-usb-core kmod-usb2 BOARDNAME := MYNET-N750 IMAGE_SIZE := 15808k MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(devdata)ro,64k(devconf)ro,15872k(firmware),64k(radiocfg)ro SEAMA_SIGNATURE := wrgnd13_wd_av endef TARGET_DEVICES += mynet-n750 define Device/qihoo-c301 $(Device/seama) DEVICE_TITLE := Qihoo C301 DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k-ct ath10k-firmware-qca988x-ct BOARDNAME := QIHOO-C301 IMAGE_SIZE := 15744k MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),64k(devdata),64k(devconf),15744k(firmware),64k(warm_start),64k(action_image_config),64k(radiocfg)ro;spi0.1:15360k(upgrade2),1024k(privatedata) SEAMA_SIGNATURE := wrgac26_qihoo360_360rg endef TARGET_DEVICES += qihoo-c301 define Device/dap-1330-a1 DEVICE_TITLE := D-Link DAP-1330 rev. A1 DEVICE_PACKAGES := rssileds BOARDNAME := DAP-1330-A1 IMAGES := factory.img sysupgrade.bin IMAGE_SIZE := 7936k IMAGE/factory.img := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) | mkdapimg2 917504 MTDPARTS := spi0.0:64k(u-boot)ro,64k(art)ro,64k(mp)ro,64k(config)ro,7936k(firmware) DAP_SIGNATURE := HONEYBEE-FIRMWARE-DAP-1330 endef TARGET_DEVICES += dap-1330-a1 define Device/dap-2695-a1 DEVICE_TITLE := D-Link DAP-2695 rev. A1 DEVICE_PACKAGES := ath10k-firmware-qca988x-ct kmod-ath10k-ct BOARDNAME := DAP-2695-A1 IMAGES := factory.img sysupgrade.bin IMAGE_SIZE := 15360k IMAGE/factory.img := append-kernel | pad-offset 65536 160 | append-rootfs | wrgg-pad-rootfs | mkwrggimg | check-size $$$$(IMAGE_SIZE) IMAGE/sysupgrade.bin := append-kernel | pad-offset 65536 160 | mkwrggimg | append-rootfs | wrgg-pad-rootfs | check-size $$$$(IMAGE_SIZE) KERNEL := kernel-bin | patch-cmdline | relocate-kernel | lzma KERNEL_INITRAMFS := $$(KERNEL) | mkwrggimg MTDPARTS := spi0.0:256k(bootloader)ro,64k(bdcfg)ro,64k(rgdb)ro,64k(langpack)ro,15360k(firmware),448k(captival)ro,64k(certificate)ro,64k(radiocfg)ro DAP_SIGNATURE := wapac02_dkbs_dap2695 endef TARGET_DEVICES += dap-2695-a1 define Device/wam250 DEVICE_TITLE := Samsung WAM250 DEVICE_PACKAGES := kmod-usb-core kmod-usb2 -swconfig BOARDNAME := WAM250 IMAGE_SIZE := 15872k MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),128k(nvram)ro,15872k(firmware),64k(art)ro SUPPORTED_DEVICES := wam250 IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) |\ append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE) endef TARGET_DEVICES += wam250 define Device/wifi-pineapple-nano $(Device/tplink-16mlzma) DEVICE_TITLE := Hak5 WiFi Pineapple NANO DEVICE_PACKAGES := kmod-ath9k-htc kmod-usb-core kmod-usb2 kmod-usb-storage \ -swconfig -uboot-envtools BOARDNAME := WIFI-PINEAPPLE-NANO DEVICE_PROFILE := WIFIPINEAPPLENANO TPLINK_HWID := 0x4e414e4f CONSOLE := ttyATH0,115200 IMAGES := sysupgrade.bin endef TARGET_DEVICES += wifi-pineapple-nano define Device/wlr8100 DEVICE_TITLE := Sitecom WLR-8100 DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport kmod-usb3 \ kmod-ath10k-ct ath10k-firmware-qca988x-ct BOARDNAME := WLR8100 IMAGE_SIZE := 15424k MTDPARTS := spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,15424k(firmware),256k(manufacture)ro,64k(backup)ro,320k(storage)ro,64k(art)ro endef TARGET_DEVICES += wlr8100 define Device/wpj-16m DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport MTDPARTS := spi0.0:192k(u-boot)ro,16128k(firmware),64k(art)ro IMAGE_SIZE := 16128k endef define Device/wpj342 $(Device/wpj-16m) DEVICE_TITLE := Compex WPJ342 (16MB flash) BOARDNAME := WPJ342 endef TARGET_DEVICES += wpj342 define Device/wpj344 $(Device/wpj-16m) DEVICE_TITLE := Compex WPJ344 (16MB flash) BOARDNAME := WPJ344 SUPPORTED_DEVICES := wpj344 IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \ append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE) endef TARGET_DEVICES += wpj344 define Device/wpj531 $(Device/wpj-16m) DEVICE_TITLE := Compex WPJ531 (16MB flash) BOARDNAME := WPJ531 endef TARGET_DEVICES += wpj531 define Device/wpj558 $(Device/wpj-16m) DEVICE_TITLE := Compex WPJ558 (16MB flash) BOARDNAME := WPJ558 SUPPORTED_DEVICES := wpj558 IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \ append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE) endef TARGET_DEVICES += wpj558 define Device/wpj563 $(Device/wpj-16m) DEVICE_TITLE := Compex WPJ563 (16MB flash) BOARDNAME := WPJ563 endef TARGET_DEVICES += wpj563 define Device/wrtnode2q DEVICE_TITLE := WRTnode2Q DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-storage BOARDNAME := WRTNODE2Q IMAGE_SIZE := 16064k MTDPARTS := spi0.0:192k(u-boot)ro,64k(u-boot-env),64k(art)ro,16064k(firmware),16384k@0x0(fullflash) endef TARGET_DEVICES += wrtnode2q define Device/AVM DEVICE_PACKAGES := fritz-tffs -uboot-envtools KERNEL := kernel-bin | patch-cmdline | lzma | eva-image KERNEL_INITRAMFS := $$(KERNEL) IMAGE/sysupgrade.bin := append-kernel | pad-to 64k | \ append-squashfs-fakeroot-be | pad-to 256 | \ append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE) endef define Device/fritz300e $(call Device/AVM) DEVICE_TITLE := AVM FRITZ!WLAN Repeater 300E DEVICE_PACKAGES += rssileds -swconfig BOARDNAME := FRITZ300E SUPPORTED_DEVICES := fritz300e IMAGE_SIZE := 15232k endef TARGET_DEVICES += fritz300e define Device/fritz4020 $(call Device/AVM) DEVICE_TITLE := AVM FRITZ!Box 4020 DEVICE_PACKAGES += kmod-usb-core kmod-usb2 kmod-usb-storage BOARDNAME := FRITZ4020 SUPPORTED_DEVICES := fritz4020 IMAGE_SIZE := 15232k endef TARGET_DEVICES += fritz4020 define Device/fritz450e $(call Device/AVM) DEVICE_TITLE := AVM FRITZ!WLAN Repeater 450E DEVICE_PACKAGES += -swconfig BOARDNAME := FRITZ450E SUPPORTED_DEVICES := fritz450e IMAGE_SIZE := 15232k endef TARGET_DEVICES += fritz450e