#!/bin/sh

[ -e /lib/firmware/$FIRMWARE ] && exit 0

. /lib/functions/caldata.sh

board=$(board_name)

case "$FIRMWARE" in
"ath10k/cal-pci-0000:00:00.0.bin")
	case $board in
	engenius,ecb1200|\
	engenius,ecb1750)
		caldata_extract "art" 0x5000 0x844
		ath10k_patch_mac $(mtd_get_mac_ascii u-boot-env athaddr)
		;;
	engenius,ews511ap)
		caldata_extract "art" 0x5000 0x844
		ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) 1)
		;;
	extreme-networks,ws-ap3805i)
		caldata_extract "art" 0x5000 0x844
		ath10k_patch_mac $(mtd_get_mac_ascii cfg1 RADIOADDR0)
		;;
	iodata,wn-ac1167dgr|\
	iodata,wn-ac1600dgr2|\
	sitecom,wlr-7100|\
	zyxel,nbg6616)
		caldata_extract "art" 0x5000 0x844
		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) 1)
		;;
	nec,wg800hp)
		caldata_extract "art" 0x5000 0x844
		ath10k_patch_mac $(mtd_get_mac_text board_data 0x880)
		;;
	qihoo,c301)
		caldata_extract "radiocfg" 0x5000 0x844
		ath10k_patch_mac $(mtd_get_mac_ascii devdata wlan5mac)
		;;
	esac
	;;
"ath10k/cal-pci-0000:01:00.0.bin")
	case $board in
	sitecom,wlr-8100)
		caldata_extract "art" 0x5000 0x844
		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) 1)
		;;
	esac
	;;
"ath10k/pre-cal-pci-0000:00:00.0.bin")
	case $board in
	dlink,dir-842-c1|\
	dlink,dir-842-c2|\
	dlink,dir-842-c3)
		caldata_extract "art" 0x5000 0x2f20
		caldata_valid "202f" || caldata_extract "reserved" 0x15000 0x2f20
		ath10k_patch_mac $(mtd_get_mac_ascii devdata wlan5mac)
		ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
			/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
		;;
	esac
	;;
*)
	exit 1
	;;
esac