# SPDX-License-Identifier: GPL-2.0-only # # Copyright (C) 2009-2013 OpenWrt.org include $(TOPDIR)/rules.mk include $(INCLUDE_DIR)/image.mk KERNEL_LOADADDR:=0x8000 # Some info about Ctera firmware: # 1. It's simple tar file (GNU standard), but it must have ".firm" suffix. # 2. It contains two images: kernel and romdisk. Both are required. # 3. Every image has header and trailer file. # 4. The struct of tar firmware is: header kernel trailer header romdisk trailer # 5. In header file are some strings used to describe image. It was decoded from # factory image. # 6. Version format in header file is restricted by Original FW. # 7. Trailer file contains MD5 sum string of header and image file. # 8. Firmware file must have <=24MB size. define Build/ctera-firmware mkdir -p $@.tmp # Prepare header and trailer file for kernel echo "# CTera firmware information file" > $@.tmp/header echo "image_type=kernel" >> $@.tmp/header echo "arch=Kirkwood" >> $@.tmp/header echo "board=Any" >> $@.tmp/header echo "version=3.1.22.30669" >> $@.tmp/header echo "kernel_cmd=console=ttyS0,115200 earlyprintk" >> $@.tmp/header echo "date=$$(date $(if $(SOURCE_DATE_EPOCH),-d@$(SOURCE_DATE_EPOCH)))" \ >> $@.tmp/header cp $@ $@.tmp/kernel echo "MD5=$$(cat $@.tmp/header $@.tmp/kernel | $(MKHASH) md5)" \ > $@.tmp/trailer tar $(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \ -H gnu -C $@.tmp -cf $@.tar header kernel trailer # Prepare header and trailer file for fake romdisk echo "# CTera firmware information file" > $@.tmp/header echo "image_type=romdisk" >> $@.tmp/header echo "initrd=yes" >> $@.tmp/header echo "arch=Kirkwood" >> $@.tmp/header echo "board=Any" >> $@.tmp/header echo "version=3.1.22.30669" >> $@.tmp/header echo "date=$$(date $(if $(SOURCE_DATE_EPOCH),-d@$(SOURCE_DATE_EPOCH)))" \ >> $@.tmp/header rm -f $@ touch $@ $(call Build/append-uImage-fakehdr, ramdisk) cp $@ $@.tmp/romdisk echo "MD5=$$(cat $@.tmp/header $@.tmp/romdisk | $(MKHASH) md5)" \ > $@.tmp/trailer tar $(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \ -H gnu -C $@.tmp -rf $@.tar header romdisk trailer mv $@.tar $@ rm -rf $@.tmp endef define Device/kernel-size-migration DEVICE_COMPAT_VERSION := 2.0 DEVICE_COMPAT_MESSAGE := Partition design has changed compared to \ older versions (up to 21.02) due to kernel size restrictions. \ Upgrade via sysupgrade mechanism is not possible, so new \ installation via factory style image is required. endef define Device/Default PROFILES := Default DEVICE_DTS = kirkwood-$(lastword $(subst _, ,$(1))) KERNEL_DEPENDS = $$(wildcard $(DTS_DIR)/$$(DEVICE_DTS).dts) KERNEL := kernel-bin | append-dtb | uImage none KERNEL_NAME := zImage KERNEL_SUFFIX := -uImage KERNEL_IN_UBI := 1 PAGESIZE := 2048 SUBPAGESIZE := 512 BLOCKSIZE := 128k IMAGES := sysupgrade.bin factory.bin IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata IMAGE/factory.bin := append-ubi endef define Device/checkpoint_l-50 DEVICE_VENDOR := Check Point DEVICE_MODEL := L-50 DEVICE_PACKAGES := kmod-ath9k kmod-gpio-button-hotplug kmod-mvsdio \ kmod-rtc-s35390a kmod-usb-ledtrig-usbport wpad-basic-wolfssl IMAGES := sysupgrade.bin endef TARGET_DEVICES += checkpoint_l-50 define Device/cisco_on100 DEVICE_VENDOR := Cisco Systems DEVICE_MODEL := ON100 KERNEL_SIZE := 5376k KERNEL_IN_UBI := UBINIZE_OPTS := -E 5 IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi DEVICE_PACKAGES := kmod-mvsdio SUPPORTED_DEVICES += on100 endef TARGET_DEVICES += cisco_on100 define Device/cloudengines_pogoe02 DEVICE_VENDOR := Cloud Engines DEVICE_MODEL := Pogoplug E02 DEVICE_DTS := kirkwood-pogo_e02 SUPPORTED_DEVICES += pogo_e02 endef TARGET_DEVICES += cloudengines_pogoe02 define Device/cloudengines_pogoplugv4 DEVICE_VENDOR := Cloud Engines DEVICE_MODEL := Pogoplug V4 DEVICE_DTS := kirkwood-pogoplug-series-4 DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 kmod-mvsdio kmod-usb3 \ kmod-gpio-button-hotplug endef TARGET_DEVICES += cloudengines_pogoplugv4 define Device/ctera_c200-v1 DEVICE_VENDOR := Ctera DEVICE_MODEL := C200 DEVICE_VARIANT := V1 DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-gpio-button-hotplug \ kmod-hwmon-lm63 kmod-rtc-s35390a kmod-usb-ledtrig-usbport KERNEL := kernel-bin | append-dtb | uImage none | ctera-firmware KERNEL_IN_UBI := KERNEL_SUFFIX := -factory.firm IMAGES := sysupgrade.bin endef TARGET_DEVICES += ctera_c200-v1 define Device/endian_4i-edge-200 DEVICE_VENDOR := Endian DEVICE_MODEL := 4i Edge 200 DEVICE_ALT0_VENDOR := Endian DEVICE_ALT0_MODEL := UTM Mini Firewall DEVICE_PACKAGES := kmod-ath9k kmod-mvsdio wpad-basic-wolfssl KERNEL_SIZE := 4096k IMAGES := sysupgrade.bin endef TARGET_DEVICES += endian_4i-edge-200 define Device/globalscale_sheevaplug DEVICE_VENDOR := Globalscale DEVICE_MODEL := Sheevaplug DEVICE_PACKAGES := kmod-mvsdio endef TARGET_DEVICES += globalscale_sheevaplug define Device/iom_iconnect-1.1 DEVICE_VENDOR := Iomega DEVICE_MODEL := Iconnect DEVICE_DTS := kirkwood-iconnect SUPPORTED_DEVICES += iconnect endef TARGET_DEVICES += iom_iconnect-1.1 define Device/iom_ix2-200 DEVICE_VENDOR := Iomega DEVICE_MODEL := StorCenter ix2-200 DEVICE_DTS := kirkwood-iomega_ix2_200 DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 \ kmod-gpio-button-hotplug kmod-hwmon-lm63 PAGESIZE := 512 SUBPAGESIZE := 256 BLOCKSIZE := 16k KERNEL_SIZE := 3072k KERNEL_IN_UBI := UBINIZE_OPTS := -E 5 IMAGE_SIZE := 31744k IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | \ check-size endef TARGET_DEVICES += iom_ix2-200 define Device/linksys DEVICE_VENDOR := Linksys DEVICE_PACKAGES := kmod-mwl8k wpad-basic-wolfssl kmod-gpio-button-hotplug KERNEL_IN_UBI := UBINIZE_OPTS := -E 5 IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi endef define Device/linksys_e4200-v2 $(Device/linksys) $(Device/kernel-size-migration) DEVICE_MODEL := E4200 DEVICE_VARIANT := v2 KERNEL_SIZE := 3072k SUPPORTED_DEVICES += linksys,viper linksys-viper endef TARGET_DEVICES += linksys_e4200-v2 define Device/linksys_ea3500 $(Device/linksys) $(Device/kernel-size-migration) DEVICE_MODEL := EA3500 PAGESIZE := 512 SUBPAGESIZE := 256 BLOCKSIZE := 16k KERNEL_SIZE := 3072k SUPPORTED_DEVICES += linksys,audi linksys-audi endef TARGET_DEVICES += linksys_ea3500 define Device/linksys_ea4500 $(Device/linksys) $(Device/kernel-size-migration) DEVICE_MODEL := EA4500 KERNEL_SIZE := 3072k SUPPORTED_DEVICES += linksys,viper linksys-viper endef TARGET_DEVICES += linksys_ea4500 define Device/netgear_readynas-duo-v2 DEVICE_VENDOR := NETGEAR DEVICE_MODEL := ReadyNAS Duo DEVICE_VARIANT := v2 DEVICE_DTS := kirkwood-netgear_readynas_duo_v2 KERNEL_IN_UBI := IMAGES := sysupgrade.bin DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 \ kmod-gpio-button-hotplug kmod-hwmon-g762 kmod-rtc-rs5c372a kmod-usb3 endef TARGET_DEVICES += netgear_readynas-duo-v2 define Device/raidsonic_ib-nas62x0 DEVICE_VENDOR := RaidSonic DEVICE_MODEL := ICY BOX IB-NAS62x0 DEVICE_DTS := kirkwood-ib62x0 DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 SUPPORTED_DEVICES += ib62x0 endef TARGET_DEVICES += raidsonic_ib-nas62x0 define Device/seagate_blackarmor-nas220 DEVICE_VENDOR := Seagate DEVICE_MODEL := Blackarmor NAS220 DEVICE_PACKAGES := kmod-hwmon-adt7475 kmod-fs-ext4 kmod-ata-marvell-sata \ mdadm kmod-gpio-button-hotplug PAGESIZE := 512 SUBPAGESIZE := 256 BLOCKSIZE := 16k UBINIZE_OPTS := -e 1 endef TARGET_DEVICES += seagate_blackarmor-nas220 define Device/seagate_dockstar DEVICE_VENDOR := Seagate DEVICE_MODEL := FreeAgent Dockstar SUPPORTED_DEVICES += dockstar endef TARGET_DEVICES += seagate_dockstar define Device/seagate_goflexnet DEVICE_VENDOR := Seagate DEVICE_MODEL := GoFlexNet DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 SUPPORTED_DEVICES += goflexnet endef TARGET_DEVICES += seagate_goflexnet define Device/seagate_goflexhome DEVICE_VENDOR := Seagate DEVICE_MODEL := GoFlexHome DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 SUPPORTED_DEVICES += goflexhome endef TARGET_DEVICES += seagate_goflexhome define Device/zyxel_nsa310b DEVICE_VENDOR := ZyXEL DEVICE_MODEL := NSA310b DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-r8169 kmod-fs-ext4 \ kmod-gpio-button-hotplug kmod-hwmon-lm85 SUPPORTED_DEVICES += nsa310b endef TARGET_DEVICES += zyxel_nsa310b define Device/zyxel_nsa310s DEVICE_VENDOR := ZyXEL DEVICE_MODEL := NSA310S DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 kmod-gpio-button-hotplug endef TARGET_DEVICES += zyxel_nsa310s define Device/zyxel_nsa325 DEVICE_VENDOR := ZyXEL DEVICE_MODEL := NSA325 DEVICE_VARIANT := v1/v2 DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 \ kmod-gpio-button-hotplug kmod-rtc-pcf8563 kmod-usb3 SUPPORTED_DEVICES += nsa325 endef TARGET_DEVICES += zyxel_nsa325 $(eval $(call BuildImage))