+#~ msgid "Bad address specified!"
+#~ msgstr "Endereço especificado está incorreto!"
+
+#~ msgid "Install iputils-traceroute6 for IPv6 traceroute"
+#~ msgstr "Instale iputils-traceroute6 para rastrear rotas IPv6"
+
+#~ msgid "Loading"
+#~ msgstr "Carregando"
+
+#~ msgid "Waiting for command to complete..."
+#~ msgstr "Aguardando a conclusão do comando..."
+
+#~ msgid "Assign interfaces..."
+#~ msgstr "Atribuir as interfaces..."
+
+#~ msgid "MB/s"
+#~ msgstr "MB/s"
+
+#~ msgid "Network without interfaces."
+#~ msgstr "Rede sem interfaces."
+
+#~ msgid ""
+#~ "Really delete this interface? The deletion cannot be undone! You might "
+#~ "lose access to this device if you are connected via this interface"
+#~ msgstr ""
+#~ "Você realmente quer apagar esta interface? Esta operação não pode ser "
+#~ "desfeita! Você pode perder acesso a este dispositivo se você estiver "
+#~ "conectado por meio desta interface"
+
+#~ msgid "Realtime Connections"
+#~ msgstr "Conexões em Tempo Real"
+
+#~ msgid "Realtime Load"
+#~ msgstr "Carga em Tempo Real"
+
+#~ msgid "Realtime Traffic"
+#~ msgstr "Tráfego em Tempo Real"
+
+#~ msgid "Realtime Wireless"
+#~ msgstr "Rede sem fio em Tempo Real"
+
+#~ msgid "Swap"
+#~ msgstr "Espaço de Troca (swap)"
+
+#~ msgid "There are no active leases."
+#~ msgstr "Não existem alocações ativas."
+
+#~ msgid ""
+#~ "This page gives an overview over currently active network connections."
+#~ msgstr "Esta página fornece informações sobre as conexões de rede ativas."
+
+#~ msgid "dB"
+#~ msgstr "dB"
+
+#~ msgid "kB/s"
+#~ msgstr "kB/s"
+
+#~ msgid "kbit/s"
+#~ msgstr "kbit/s"
+
+#~ msgid "Caution: Configuration files will be erased"
+#~ msgstr "Cuidado: As configurações serão apagadas"
+
+#~ msgid "Changes applied."
+#~ msgstr "Alterações aplicadas."
+
+#~ msgid "Configuration files will be kept"
+#~ msgstr "Arquivos de configuração que serão mantidos"
+
+#~ msgid "Device is rebooting..."
+#~ msgstr "O dispositivo está reiniciando..."
+
+#~ msgid "Keep settings"
+#~ msgstr "Manter configurações"
+
+#~ msgid "Rebooting..."
+#~ msgstr "Reiniciando..."
+
+#~ msgid ""
+#~ "Upload a sysupgrade-compatible image here to replace the running "
+#~ "firmware. Check \"Keep settings\" to retain the current configuration "
+#~ "(requires a compatible firmware image)."
+#~ msgstr ""
+#~ "Envia uma imagem compatível do sistema para substituir o firmware em "
+#~ "execução. Marque \"Manter configurações\" para manter as configurações "
+#~ "atuais (requer uma imagem compatível)."
+
+#~ msgid ""
+#~ "Used for two different purposes: RADIUS NAS ID and 802.11r R0KH-ID. Not "
+#~ "needed with normal WPA(2)-PSK/WPA3-SAE."
+#~ msgstr ""
+#~ "Usado para dois diferentes propósitos: identificador do RADIUS NAS e do "
+#~ "802.11r R0KH. Não necessário com o WPA(2)-PSK/WPA3-SAE normal."
+
+#~ msgid "Waiting for changes to be applied..."
+#~ msgstr "Esperando a aplicação das mudanças..."
+
+#~ msgid "(%s available)"
+#~ msgstr "(%s disponível)"
+
+#~ msgid "-- match by device --"
+#~ msgstr "-- casar por dispositivo --"
+
+#~ msgid "Caution: System upgrade will be forced"
+#~ msgstr "Cuidado: A atualização do sistema será forçada"
+
+#~ msgid "Check"
+#~ msgstr "Verificar"
+
+#~ msgid "Checksum"
+#~ msgstr "Soma de verificação"
+
+#~ msgid "Enable this mount"
+#~ msgstr "Ativar esta montagem"
+
+#~ msgid "Enable this swap"
+#~ msgstr "Ativar este espaço de troca (swap)"
+
+#~ msgid "Flash Firmware"
+#~ msgstr "Gravar Firmware"
+
+#~ msgid "Flashing..."
+#~ msgstr "Gravando na flash..."
+
+#~ msgid "Mount Entry"
+#~ msgstr "Entrada de Montagem"
+
+#~ msgid "Proceed"
+#~ msgstr "Proceder"
+
+#~ msgid "Really reset all changes?"
+#~ msgstr "Realmente limpar todas as mudanças?"
+
+#~ msgid "Root"
+#~ msgstr "Raiz"
+
+#~ msgid "Swap Entry"
+#~ msgstr "Entrada do espaço de troca (Swap)"
+
+#~ msgid "The backup archive does not appear to be a valid gzip file."
+#~ msgstr ""
+#~ "O arquivo de recuperação não parece ser um arquivo válido no formato GZIP."
+
+#~ msgid ""
+#~ "The filesystem that was used to format the memory (<abbr title=\"for "
+#~ "example\">e.g.</abbr> <samp><abbr title=\"Third Extended Filesystem"
+#~ "\">ext3</abbr></samp>)"
+#~ msgstr ""
+#~ "O sistema de arquivos que foi usado para formatar a unidade de "
+#~ "armazenamento (<abbr title=\"por exemplo\">ex.</abbr> <samp><abbr title="
+#~ "\"Sistema de Arquivos ext3\">ext3</abbr></samp>)"
+
+#~ msgid ""
+#~ "The flash image was uploaded. Below is the checksum and file size listed, "
+#~ "compare them with the original file to ensure data integrity.<br /> Click "
+#~ "\"Proceed\" below to start the flash procedure."
+#~ msgstr ""
+#~ "A imagem do firmware foi enviada. Abaixo estão a soma de verificação "
+#~ "(checksum) e o tamanho dom arquivo. Compare-os com o arquivo original "
+#~ "para garantir a integridade dos dados. <br /> Clique em \"Proceder\" para "
+#~ "iniciar o procedimetno de gravação."
+
+#~ msgid "Verify"
+#~ msgstr "Verificar"
+
+#~ msgid "overlay"
+#~ msgstr "sobreposição"
+