msgid "ADSL"
msgstr ""
-msgid "AICCU (SIXXS)"
-msgstr ""
-
msgid "ANSI T1.413"
msgstr ""
msgid "ATU-C System Vendor ID"
msgstr ""
-msgid "AYIYA"
-msgstr ""
-
msgid "Access Concentrator"
msgstr "Concentrateur d'accès"
msgid "Allowed IPs"
msgstr ""
-msgid ""
-"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison"
-"\">Tunneling Comparison</a> on SIXXS"
-msgstr ""
-
msgid "Always announce default router"
msgstr ""
msgid "Any zone"
msgstr "N'importe quelle zone"
-msgid "Apply"
-msgstr "Appliquer"
+msgid "Apply request failed with status <code>%h</code>"
+msgstr ""
-msgid "Applying changes"
-msgstr "Changements en cours"
+msgid "Apply unchecked"
+msgstr ""
+
+msgid "Architecture"
+msgstr ""
msgid ""
"Assign a part of given length of every public IPv6-prefix to this interface"
msgid "Associated Stations"
msgstr "Équipements associés"
+msgid "Associations"
+msgstr ""
+
msgid "Auth Group"
msgstr ""
msgid "Band"
msgstr ""
-msgid "Behind NAT"
-msgstr ""
-
msgid ""
"Below is the determined list of files to backup. It consists of changed "
"configuration files marked by opkg, essential base files and the user "
msgid "Changes applied."
msgstr "Changements appliqués."
+msgid "Changes have been reverted."
+msgstr ""
+
msgid "Changes the administrator password for accessing the device"
msgstr "Change le mot de passe administrateur pour accéder à l'équipement"
msgid "Channel"
msgstr "Canal"
+msgid ""
+"Channel %d is not available in the %s regulatory domain and has been auto-"
+"adjusted to %d."
+msgstr ""
+
msgid "Check"
msgstr "Vérification"
msgid "Configuration"
msgstr "Configuration"
-msgid "Configuration applied."
-msgstr "Configuration appliquée."
-
msgid "Configuration files will be kept."
msgstr "Les fichiers de configuration seront préservés."
+msgid "Configuration has been applied."
+msgstr ""
+
+msgid "Configuration has been rolled back!"
+msgstr ""
+
msgid "Confirmation"
msgstr "Confirmation"
msgid "Connection Limit"
msgstr "Limite de connexion"
-msgid "Connection to server fails when TLS cannot be used"
-msgstr ""
-
msgid "Connections"
msgstr "Connexions"
+msgid ""
+"Could not regain access to the device after applying the configuration "
+"changes. You might need to reconnect if you modified network related "
+"settings such as the IP address or wireless security credentials."
+msgstr ""
+
msgid "Country"
msgstr "Pays"
msgid "Custom feeds"
msgstr ""
+msgid ""
+"Custom files (certificates, scripts) may remain on the system. To prevent "
+"this, perform a factory-reset first."
+msgstr ""
+
msgid ""
"Customizes the behaviour of the device <abbr title=\"Light Emitting Diode"
"\">LED</abbr>s if possible."
msgid "Default is stateless + stateful"
msgstr ""
-msgid "Default route"
-msgstr ""
-
msgid "Default state"
msgstr "État par défaut"
msgid "Device unreachable"
msgstr ""
+msgid "Device unreachable!"
+msgstr ""
+
msgid "Diagnostics"
msgstr "Diagnostics"
msgid "Discard upstream RFC1918 responses"
msgstr "Jeter les réponses en RFC1918 amont"
+msgid "Dismiss"
+msgstr ""
+
msgid "Displaying only packages containing"
msgstr "N'afficher que les paquets contenant"
msgid "Enable"
msgstr "Activer"
+msgid ""
+"Enable <abbr title=\"Internet Group Management Protocol\">IGMP</abbr> "
+"snooping"
+msgstr ""
+
msgid "Enable <abbr title=\"Spanning Tree Protocol\">STP</abbr>"
msgstr "Activer le protocole <abbr title=\"Spanning Tree Protocol\">STP</abbr>"
msgid "Enabled"
msgstr "Activé"
+msgid "Enables IGMP snooping on this bridge"
+msgstr ""
+
msgid ""
"Enables fast roaming among access points that belong to the same Mobility "
"Domain"
msgid "FT protocol"
msgstr ""
+msgid "Failed to confirm apply within %ds, waiting for rollback…"
+msgstr ""
+
msgid "File"
msgstr "Fichier"
msgid "Header Error Code Errors (HEC)"
msgstr ""
-msgid "Heartbeat"
-msgstr ""
-
msgid ""
"Here you can configure the basic aspects of your device like its hostname or "
"the timezone."
msgid "IPv4 Firewall"
msgstr "Pare-feu IPv4"
-msgid "IPv4 WAN Status"
-msgstr "État IPv4 du WAN"
+msgid "IPv4 Upstream"
+msgstr ""
msgid "IPv4 address"
msgstr "Adresse IPv4"
msgid "IPv6 ULA-Prefix"
msgstr ""
-msgid "IPv6 WAN Status"
-msgstr "État IPv6 du WAN"
+msgid "IPv6 Upstream"
+msgstr ""
msgid "IPv6 address"
msgstr "Adresse IPv6"
-msgid "IPv6 address delegated to the local tunnel endpoint (optional)"
-msgstr ""
-
msgid "IPv6 assignment hint"
msgstr ""
msgid "NTP server candidates"
msgstr "Serveurs NTP candidats"
-msgid "NTP sync time-out"
-msgstr ""
-
msgid "Name"
msgstr "Nom"
msgid "Nslookup"
msgstr "Nslookup"
+msgid "Number of cached DNS entries (max is 10000, 0 is no caching)"
+msgstr ""
+
msgid "OK"
msgstr "OK"
msgid "Obfuscated Password"
msgstr ""
+msgid "Obtain IPv6-Address"
+msgstr ""
+
msgid "Off-State Delay"
msgstr "Durée éteinte"
msgid "Optional"
msgstr ""
-msgid "Optional, specify to override default server (tic.sixxs.net)"
-msgstr ""
-
-msgid "Optional, use when the SIXXS account has more than one tunnel"
-msgstr ""
-
msgid ""
"Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, "
"starting with <code>0x</code>."
msgid "Request IPv6-prefix of length"
msgstr ""
-msgid "Require TLS"
-msgstr ""
-
msgid "Required"
msgstr ""
msgid "Revert"
msgstr "Revenir"
+msgid "Revert changes"
+msgstr ""
+
+msgid "Revert request failed with status <code>%h</code>"
+msgstr ""
+
+msgid "Reverting configuration…"
+msgstr ""
+
msgid "Root"
msgstr "Racine"
msgid "Route type"
msgstr ""
-msgid "Routed IPv6 prefix for downstream interfaces"
-msgstr ""
-
msgid "Router Advertisement-Service"
msgstr ""
msgid "SHA256"
msgstr ""
-msgid ""
-"SIXXS supports TIC only, for static tunnels using IP protocol 41 (RFC4213) "
-"use 6in4 instead"
-msgstr ""
-
-msgid "SIXXS-handle[/Tunnel-ID]"
-msgstr ""
-
msgid "SNR"
msgstr ""
msgid "Save & Apply"
msgstr "Sauvegarder et Appliquer"
-msgid "Save & Apply"
-msgstr "Sauvegarder et appliquer"
-
msgid "Scan"
msgstr "Scan"
msgid "Server Settings"
msgstr "Paramètres du serveur"
-msgid "Server password"
-msgstr ""
-
-msgid ""
-"Server password, enter the specific password of the tunnel when the username "
-"contains the tunnel ID"
-msgstr ""
-
-msgid "Server username"
-msgstr ""
-
msgid "Service Name"
msgstr "Nom du service"
msgid "Size (.ipk)"
msgstr ""
+msgid "Size of DNS query cache"
+msgstr ""
+
msgid "Skip"
msgstr "Passer au suivant"
msgid "Source"
msgstr "Source"
-msgid "Source routing"
-msgstr ""
-
msgid "Specifies the directory the device is attached to"
msgstr "Indique le répertoire auquel le périphérique est rattaché"
msgid "Start priority"
msgstr "Priorité de démarrage"
+msgid "Starting configuration apply…"
+msgstr ""
+
msgid "Startup"
msgstr "Démarrage"
"Switch %q has an unknown topology - the VLAN settings might not be accurate."
msgstr ""
+msgid "Switch Port Mask"
+msgstr ""
+
msgid "Switch VLAN"
msgstr ""
msgid "The configuration file could not be loaded due to the following error:"
msgstr ""
+msgid ""
+"The device could not be reached within %d seconds after applying the pending "
+"changes, which caused the configuration to be rolled back for safety "
+"reasons. If you believe that the configuration changes are correct "
+"nonetheless, perform an unchecked configuration apply. Alternatively, you "
+"can dismiss this warning and edit changes before attempting to apply again, "
+"or revert all pending changes to keep the currently working configuration "
+"state."
+msgstr ""
+
msgid ""
"The device file of the memory or partition (<abbr title=\"for example\">e.g."
"</abbr> <code>/dev/sda1</code>)"
"assurer de son intégrité.<br /> Cliquez sur \"Continuer\" pour lancer la "
"procédure d'écriture."
-msgid "The following changes have been committed"
-msgstr "Les changements suivants ont été appliqués"
-
msgid "The following changes have been reverted"
msgstr "Les changements suivants ont été annulés"
"address of your computer to reach the device again, depending on your "
"settings."
-msgid ""
-"The tunnel end-point is behind NAT, defaults to disabled and only applies to "
-"AYIYA"
-msgstr ""
-
msgid ""
"The uploaded image file does not contain a supported format. Make sure that "
"you choose the generic image format for your platform."
msgid "There are no active leases."
msgstr "Il n'y a aucun bail actif."
-msgid "There are no pending changes to apply!"
-msgstr "Il n'y a aucun changement en attente d'être appliqués !"
+msgid "There are no changes to apply."
+msgstr ""
msgid "There are no pending changes to revert!"
msgstr "Il n'y a aucun changement à annuler !"
msgid ""
"This is the local endpoint address assigned by the tunnel broker, it usually "
-"ends with <code>:2</code>"
+"ends with <code>...:2/64</code>"
msgstr ""
"Il s'agit de l'adresse de l'extrémité locale attribuée par le fournisseur de "
-"tunnels, elle se termine habituellement avec <code>:2</code>"
+"tunnels, elle se termine habituellement avec <code>...:2/64</code>"
msgid ""
"This is the only <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
msgid "Tunnel Link"
msgstr ""
-msgid "Tunnel broker protocol"
-msgstr ""
-
-msgid "Tunnel setup server"
-msgstr ""
-
-msgid "Tunnel type"
-msgstr ""
-
msgid "Tx-Power"
msgstr "Puissance d'émission"
msgid ""
"Use the <em>Add</em> Button to add a new lease entry. The <em>MAC-Address</"
-"em> indentifies the host, the <em>IPv4-Address</em> specifies to the fixed "
-"address to use and the <em>Hostname</em> is assigned as symbolic name to the "
-"requesting host. The optional <em>Lease time</em> can be used to set non-"
+"em> identifies the host, the <em>IPv4-Address</em> specifies the fixed "
+"address to use, and the <em>Hostname</em> is assigned as a symbolic name to "
+"the requesting host. The optional <em>Lease time</em> can be used to set non-"
"standard host-specific lease time, e.g. 12h, 3d or infinite."
msgstr ""
"Utiliser le bouton <em>Ajouter</em> pour créer un nouveau bail. "
msgid "Vendor Class to send when requesting DHCP"
msgstr "Classe de fournisseur à envoyer dans les requêtes DHCP"
-msgid "Verbose"
-msgstr ""
-
-msgid "Verbose logging by aiccu daemon"
-msgstr ""
-
msgid "Verify"
msgstr "Vérifier"
"Le chiffrage WPA nécessite l'installation du paquet wpa_supplicant (en mode "
"client) ou hostapd (en mode Point d'accès ou Ad-hoc)."
-msgid ""
-"Wait for NTP sync that many seconds, seting to 0 disables waiting (optional)"
-msgstr ""
-
msgid "Waiting for changes to be applied..."
msgstr "En attente de l'application des changements..."
msgid "Waiting for command to complete..."
msgstr "En attente de la fin de la commande..."
+msgid "Waiting for configuration to get applied… %ds"
+msgstr ""
+
msgid "Waiting for device..."
msgstr ""
"communications"
msgstr ""
-msgid "Whether to create an IPv6 default route over the tunnel"
-msgstr ""
-
-msgid "Whether to route only packets from delegated prefixes"
-msgstr ""
-
msgid "Width"
msgstr ""
msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file"
msgstr "fichier de résolution local"
-msgid "minimum 1280, maximum 1480"
-msgstr ""
-
msgid "minutes"
msgstr ""
msgid "overlay"
msgstr ""
+msgid "random"
+msgstr ""
+
msgid "relay mode"
msgstr ""
msgid "« Back"
msgstr "« Retour"
+#~ msgid "IPv4 WAN Status"
+#~ msgstr "État IPv4 du WAN"
+
+#~ msgid "IPv6 WAN Status"
+#~ msgstr "État IPv6 du WAN"
+
+#~ msgid "Apply"
+#~ msgstr "Appliquer"
+
+#~ msgid "Applying changes"
+#~ msgstr "Changements en cours"
+
+#~ msgid "Configuration applied."
+#~ msgstr "Configuration appliquée."
+
+#~ msgid "Save & Apply"
+#~ msgstr "Sauvegarder et appliquer"
+
+#~ msgid "The following changes have been committed"
+#~ msgstr "Les changements suivants ont été appliqués"
+
+#~ msgid "There are no pending changes to apply!"
+#~ msgstr "Il n'y a aucun changement en attente d'être appliqués !"
+
#~ msgid "Action"
#~ msgstr "Action"