msgid "-- match by uuid --"
msgstr ""
+msgid "-- please select --"
+msgstr ""
+
msgid "1 Minute Load:"
msgstr "Carico in 1 minuto:"
msgid "ADSL"
msgstr ""
-msgid "AICCU (SIXXS)"
-msgstr ""
-
msgid "ANSI T1.413"
msgstr ""
msgid "ATU-C System Vendor ID"
msgstr ""
-msgid "AYIYA"
-msgstr ""
-
msgid "Access Concentrator"
msgstr "Accesso Concentratore"
msgid "Allowed IPs"
msgstr ""
-msgid ""
-"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison"
-"\">Tunneling Comparison</a> on SIXXS"
-msgstr ""
-
msgid "Always announce default router"
msgstr ""
msgid "Any zone"
msgstr "Qualsiasi Zona"
-msgid "Apply"
-msgstr "Applica"
+msgid "Apply request failed with status <code>%h</code>"
+msgstr ""
+
+msgid "Apply unchecked"
+msgstr ""
-msgid "Applying changes"
-msgstr "Applica modifiche"
+msgid "Architecture"
+msgstr ""
msgid ""
"Assign a part of given length of every public IPv6-prefix to this interface"
msgid "Associated Stations"
msgstr "Dispositivi Wi-Fi connessi"
+msgid "Associations"
+msgstr ""
+
msgid "Auth Group"
msgstr ""
msgid "Band"
msgstr ""
-msgid "Behind NAT"
-msgstr ""
-
msgid ""
"Below is the determined list of files to backup. It consists of changed "
"configuration files marked by opkg, essential base files and the user "
msgid "Changes applied."
msgstr "Modifiche applicate."
+msgid "Changes have been reverted."
+msgstr ""
+
msgid "Changes the administrator password for accessing the device"
msgstr "Cambia la password di amministratore per accedere al dispositivo"
msgid "Channel"
msgstr "Canale"
+msgid ""
+"Channel %d is not available in the %s regulatory domain and has been auto-"
+"adjusted to %d."
+msgstr ""
+
msgid "Check"
msgstr "Verifica"
msgid "Configuration"
msgstr "Configurazione"
-msgid "Configuration applied."
-msgstr "Configurazione salvata."
-
msgid "Configuration files will be kept."
msgstr "I file di configurazione verranno mantenuti."
+msgid "Configuration has been applied."
+msgstr ""
+
+msgid "Configuration has been rolled back!"
+msgstr ""
+
msgid "Confirmation"
msgstr "Conferma"
msgid "Connection Limit"
msgstr "Limite connessioni"
-msgid "Connection to server fails when TLS cannot be used"
-msgstr ""
-
msgid "Connections"
msgstr "Connessioni"
+msgid ""
+"Could not regain access to the device after applying the configuration "
+"changes. You might need to reconnect if you modified network related "
+"settings such as the IP address or wireless security credentials."
+msgstr ""
+
msgid "Country"
msgstr "Nazione"
msgid "Custom feeds"
msgstr ""
+msgid ""
+"Custom files (certificates, scripts) may remain on the system. To prevent "
+"this, perform a factory-reset first."
+msgstr ""
+
msgid ""
"Customizes the behaviour of the device <abbr title=\"Light Emitting Diode"
"\">LED</abbr>s if possible."
msgid "Default is stateless + stateful"
msgstr ""
-msgid "Default route"
-msgstr ""
-
msgid "Default state"
msgstr "Stato Predefinito"
msgid "Device unreachable"
msgstr "Dispositivo irraggiungibile"
+msgid "Device unreachable!"
+msgstr ""
+
msgid "Diagnostics"
msgstr "Diagnostica"
msgid "Discard upstream RFC1918 responses"
msgstr "Ignora risposte RFC1918 upstream"
+msgid "Dismiss"
+msgstr ""
+
msgid "Displaying only packages containing"
msgstr "Visualizza solo i pacchetti contenenti"
msgid "Enable"
msgstr "Abilita"
+msgid ""
+"Enable <abbr title=\"Internet Group Management Protocol\">IGMP</abbr> "
+"snooping"
+msgstr ""
+
msgid "Enable <abbr title=\"Spanning Tree Protocol\">STP</abbr>"
msgstr "Abilita <abbr title=\"Spanning Tree Protocol\">STP</abbr>"
msgid "Enabled"
msgstr "Abilitato"
+msgid "Enables IGMP snooping on this bridge"
+msgstr ""
+
msgid ""
"Enables fast roaming among access points that belong to the same Mobility "
"Domain"
msgid "FT protocol"
msgstr ""
+msgid "Failed to confirm apply within %ds, waiting for rollback…"
+msgstr ""
+
msgid "File"
msgstr "File"
msgid ""
"Further information about WireGuard interfaces and peers at <a href=\"http://"
-"wireguard.io\">wireguard.io</a>."
+"wireguard.com\">wireguard.com</a>."
msgstr ""
msgid "GHz"
msgid "Header Error Code Errors (HEC)"
msgstr ""
-msgid "Heartbeat"
-msgstr ""
-
msgid ""
"Here you can configure the basic aspects of your device like its hostname or "
"the timezone."
msgid "IPv4 Firewall"
msgstr "IPv4 Firewall"
-msgid "IPv4 WAN Status"
-msgstr "Stato WAN IPv4"
+msgid "IPv4 Upstream"
+msgstr ""
msgid "IPv4 address"
msgstr "Indirizzi IPv4"
msgid "IPv6 ULA-Prefix"
msgstr ""
-msgid "IPv6 WAN Status"
-msgstr "Stato WAN IPv6"
+msgid "IPv6 Upstream"
+msgstr ""
msgid "IPv6 address"
msgstr "Indirizzi IPv6"
-msgid "IPv6 address delegated to the local tunnel endpoint (optional)"
-msgstr ""
-
msgid "IPv6 assignment hint"
msgstr ""
msgid "NTP server candidates"
msgstr "Candidati server NTP"
-msgid "NTP sync time-out"
-msgstr "Sincronizzazione NTP scaduta"
-
msgid "Name"
msgstr "Nome"
msgid "Nslookup"
msgstr ""
+msgid "Number of cached DNS entries (max is 10000, 0 is no caching)"
+msgstr ""
+
msgid "OK"
msgstr "OK"
msgid "Obfuscated Password"
msgstr ""
+msgid "Obtain IPv6-Address"
+msgstr ""
+
msgid "Off-State Delay"
msgstr ""
msgid "Optional"
msgstr ""
-msgid "Optional, specify to override default server (tic.sixxs.net)"
-msgstr ""
-
-msgid "Optional, use when the SIXXS account has more than one tunnel"
-msgstr ""
-
msgid ""
"Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, "
"starting with <code>0x</code>."
"\"Dynamic Host Configuration Protocol\">DHCP</abbr>"
msgid ""
-"Really delete this interface? The deletion cannot be undone!\\nYou might "
-"lose access to this device if you are connected via this interface."
+"Really delete this interface? The deletion cannot be undone! You might lose "
+"access to this device if you are connected via this interface."
msgstr ""
+"Vuoi davvero rimuovere questa interfaccia? La rimozione non può essere ripristinata! "
+"Potresti perdere l'accesso a questo dispositivo se sei connesso con questa rete."
msgid ""
-"Really delete this wireless network? The deletion cannot be undone!\\nYou "
+"Really delete this wireless network? The deletion cannot be undone! You "
"might lose access to this device if you are connected via this network."
msgstr ""
+"Vuoi davvero rimuovere questa interfaccia wireless? La rimozione non può essere ripristinata! "
+"Potresti perdere l'accesso a questo dispositivo se sei connesso con questa rete."
msgid "Really reset all changes?"
msgstr "Azzerare veramente tutte le modifiche?"
-#, fuzzy
msgid ""
-"Really shut down network?\\nYou might lose access to this device if you are "
+"Really shut down network? You might lose access to this device if you are "
"connected via this interface."
msgstr ""
-"Vuoi davvero spegnere questa interfaccia \"%s\" ?\\nPotresti perdere "
-"l'accesso a questo router se stai usando questa interfaccia."
+"Vuoi davvero spegnere questa interfaccia? Potresti perdere l'accesso a "
+"questo router se sei connesso usando questa interfaccia."
msgid ""
-"Really shutdown interface \"%s\" ?\\nYou might lose access to this device if "
+"Really shutdown interface \"%s\"? You might lose access to this device if "
"you are connected via this interface."
msgstr ""
+"Vuoi davvero spegnere questa interfaccia \"%s\"? Potresti perdere l'accesso "
+"a questo router se stai usando questa interfaccia."
msgid "Really switch protocol?"
msgstr "Cambiare veramente il protocollo?"
msgid "Request IPv6-prefix of length"
msgstr "Richiede prefisso-IPv6 di lunghezza"
-msgid "Require TLS"
-msgstr "Richiede TLS"
-
msgid "Required"
msgstr "Richiesto"
msgid "Revert"
msgstr "Ripristina"
+msgid "Revert changes"
+msgstr ""
+
+msgid "Revert request failed with status <code>%h</code>"
+msgstr ""
+
+msgid "Reverting configuration…"
+msgstr ""
+
msgid "Root"
msgstr ""
msgid "Route type"
msgstr ""
-msgid "Routed IPv6 prefix for downstream interfaces"
-msgstr ""
-
msgid "Router Advertisement-Service"
msgstr ""
msgid "SHA256"
msgstr ""
-msgid ""
-"SIXXS supports TIC only, for static tunnels using IP protocol 41 (RFC4213) "
-"use 6in4 instead"
-msgstr ""
-
-msgid "SIXXS-handle[/Tunnel-ID]"
-msgstr ""
-
msgid "SNR"
msgstr ""
msgid "Save & Apply"
msgstr "Salva & applica"
-msgid "Save & Apply"
-msgstr "Salva & Applica"
-
msgid "Scan"
msgstr "Scan"
msgid "Server Settings"
msgstr "Impostazioni Server"
-msgid "Server password"
-msgstr ""
-
-msgid ""
-"Server password, enter the specific password of the tunnel when the username "
-"contains the tunnel ID"
-msgstr ""
-
-msgid "Server username"
-msgstr ""
-
msgid "Service Name"
msgstr ""
msgid "Size (.ipk)"
msgstr ""
+msgid "Size of DNS query cache"
+msgstr ""
+
msgid "Skip"
msgstr "Salta"
msgid "Source"
msgstr "Origine"
-msgid "Source routing"
-msgstr ""
-
msgid "Specifies the directory the device is attached to"
msgstr "Specifica la cartella a cui è collegato il dispositivo in"
msgid "Start priority"
msgstr "Priorità di avvio"
+msgid "Starting configuration apply…"
+msgstr ""
+
msgid "Startup"
msgstr "Avvio"
"Switch %q has an unknown topology - the VLAN settings might not be accurate."
msgstr ""
+msgid "Switch Port Mask"
+msgstr ""
+
msgid "Switch VLAN"
msgstr ""
msgid "The configuration file could not be loaded due to the following error:"
msgstr ""
+msgid ""
+"The device could not be reached within %d seconds after applying the pending "
+"changes, which caused the configuration to be rolled back for safety "
+"reasons. If you believe that the configuration changes are correct "
+"nonetheless, perform an unchecked configuration apply. Alternatively, you "
+"can dismiss this warning and edit changes before attempting to apply again, "
+"or revert all pending changes to keep the currently working configuration "
+"state."
+msgstr ""
+
msgid ""
"The device file of the memory or partition (<abbr title=\"for example\">e.g."
"</abbr> <code>/dev/sda1</code>)"
"\"Proceed\" below to start the flash procedure."
msgstr ""
-msgid "The following changes have been committed"
-msgstr ""
-
msgid "The following changes have been reverted"
msgstr "Le seguenti modifiche sono state annullate"
"address of your computer to reach the device again, depending on your "
"settings."
-msgid ""
-"The tunnel end-point is behind NAT, defaults to disabled and only applies to "
-"AYIYA"
-msgstr ""
-
msgid ""
"The uploaded image file does not contain a supported format. Make sure that "
"you choose the generic image format for your platform."
msgid "There are no active leases."
msgstr "Non ci sono contratti attivi."
-msgid "There are no pending changes to apply!"
-msgstr "Non ci sono cambiamenti pendenti da applicare!"
+msgid "There are no changes to apply."
+msgstr ""
msgid "There are no pending changes to revert!"
msgstr "Non ci sono cambiamenti pendenti da regredire"
msgid ""
"This is the local endpoint address assigned by the tunnel broker, it usually "
-"ends with <code>:2</code>"
+"ends with <code>...:2/64</code>"
msgstr ""
msgid ""
msgid "Tunnel Link"
msgstr ""
-msgid "Tunnel broker protocol"
-msgstr ""
-
-msgid "Tunnel setup server"
-msgstr ""
-
-msgid "Tunnel type"
-msgstr ""
-
msgid "Tx-Power"
msgstr ""
msgid ""
"Use the <em>Add</em> Button to add a new lease entry. The <em>MAC-Address</"
-"em> indentifies the host, the <em>IPv4-Address</em> specifies to the fixed "
-"address to use and the <em>Hostname</em> is assigned as symbolic name to the "
-"requesting host. The optional <em>Lease time</em> can be used to set non-"
+"em> identifies the host, the <em>IPv4-Address</em> specifies the fixed "
+"address to use, and the <em>Hostname</em> is assigned as a symbolic name to "
+"the requesting host. The optional <em>Lease time</em> can be used to set non-"
"standard host-specific lease time, e.g. 12h, 3d or infinite."
msgstr ""
"Utilizzare il pulsante <em>Aggiungi</em> per aggiungere una nuova voce di "
msgid "Vendor Class to send when requesting DHCP"
msgstr "Classe del Produttore da 'inviare al momento della richiesta DHCP"
-msgid "Verbose"
-msgstr ""
-
-msgid "Verbose logging by aiccu daemon"
-msgstr ""
-
msgid "Verify"
msgstr "Verifica"
"La crittografia WPA richiede wpa_supplicant (per la modalità client) o "
"hostapd (per AP e modalità ad hoc) per essere installato."
-msgid ""
-"Wait for NTP sync that many seconds, seting to 0 disables waiting (optional)"
-msgstr ""
-"Attendi sincro NTP quei dati secondi, immetti 0 per disabilitare l'attesa "
-"(opzionale)"
-
msgid "Waiting for changes to be applied..."
msgstr "In attesa delle modifiche da applicare ..."
msgid "Waiting for command to complete..."
msgstr "In attesa del comando da completare..."
+msgid "Waiting for configuration to get applied… %ds"
+msgstr ""
+
msgid "Waiting for device..."
msgstr ""
"communications"
msgstr ""
-msgid "Whether to create an IPv6 default route over the tunnel"
-msgstr ""
-
-msgid "Whether to route only packets from delegated prefixes"
-msgstr ""
-
msgid "Width"
msgstr ""
msgid "bridged"
msgstr "ponte"
+msgid "create"
+msgstr ""
+
msgid "create:"
msgstr "crea:"
msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file"
msgstr "File <abbr title=\"Sistema Nome Dominio\">DNS</abbr> locale"
-msgid "minimum 1280, maximum 1480"
-msgstr ""
-
msgid "minutes"
msgstr ""
msgid "open"
msgstr "apri"
+msgid "output"
+msgstr ""
+
msgid "overlay"
msgstr ""
+msgid "random"
+msgstr ""
+
msgid "relay mode"
msgstr ""
msgid "« Back"
msgstr "« Indietro"
-#~ msgid "Action"
-#~ msgstr "Azione"
-
-#~ msgid "Buttons"
-#~ msgstr "Pulsanti"
-
-#~ msgid "Handler"
-#~ msgstr "Gestore"
-
-#~ msgid "Maximum hold time"
-#~ msgstr "Tempo massimo di attesa"
-
-#~ msgid "Minimum hold time"
-#~ msgstr "Velocità minima"
-
-#~ msgid "Specifies the button state to handle"
-#~ msgstr "Specifica lo stato del pulsante da gestire"
-
-#~ msgid "Leasetime"
-#~ msgstr "Tempo di contratto"
-
-#, fuzzy
-#~ msgid "automatic"
-#~ msgstr "statico"
-
-#~ msgid "AR Support"
-#~ msgstr "Supporto AR"
-
-#~ msgid "Atheros 802.11%s Wireless Controller"
-#~ msgstr "Dispositivo Wireless Atheros 802.11%s"
-
-#~ msgid "Background Scan"
-#~ msgstr "Scansione in background"
-
-#~ msgid "Compression"
-#~ msgstr "Compressione"
-
-#~ msgid "Disable HW-Beacon timer"
-#~ msgstr "Disabilita Timer Beacon HW"
-
-#~ msgid "Do not send probe responses"
-#~ msgstr "Disabilita Probe-Responses"
-
-#~ msgid "Fast Frames"
-#~ msgstr "Frame veloci"
-
-#~ msgid "Maximum Rate"
-#~ msgstr "Velocità massima"
-
-#~ msgid "Minimum Rate"
-#~ msgstr "Velocità minima"
-
-#~ msgid "Multicast Rate"
-#~ msgstr "Velocità multicast"
-
-#~ msgid "Separate WDS"
-#~ msgstr "WDS separati"
-
-#~ msgid "Static WDS"
-#~ msgstr "WDS statico"
-
-#~ msgid "Turbo Mode"
-#~ msgstr "Modalità turbo"
-
-#~ msgid "XR Support"
-#~ msgstr "Supporto XR"
-
-#~ msgid "An additional network will be created if you leave this unchecked."
-#~ msgstr "Sarà creata una rete aggiuntiva se lasci questo senza spunta."
-
-#~ msgid "Join Network: Settings"
-#~ msgstr "Aggiunta Rete: Impostazioni"
-
-#~ msgid "CPU"
-#~ msgstr "CPU"
-
-#~ msgid "Port %d"
-#~ msgstr "Porta %d"
+#~ msgid "IPv4 WAN Status"
+#~ msgstr "Stato WAN IPv4"
-#~ msgid "VLAN Interface"
-#~ msgstr "Interfaccia VLAN"
+#~ msgid "IPv6 WAN Status"
+#~ msgstr "Stato WAN IPv6"
projects / project / luci.git / blobdiff