-choice
- prompt "Target system"
-
-config BR2_LINUX_2_4_BRCM
- bool "Support for Broadcom based routers [2.4]"
- default y
- depends BR2_mipsel
- select BR2_LINUX_PCMCIA_SUPPORT
- help
- Build firmware images for Broadcom based routers
- (e.g. Linksys WRT54G(S), Asus WL-500g, Motorola WR850G)
-
- This one builds the generic .trx images, activate one of the
- options below for creating device specific files for use
- with TFTP client too.
-
-config BR2_LINUX_2_4_AR7
- bool "Support for TI AR7 based devices [2.4]"
- default n
- depends BR2_mipsel
- help
- Build firmware images for TI AR7 based routers (w.g. Linksys WAG54G v2)
-
-config BR2_LINUX_2_4_X86
- bool "Support for x86 boards [2.4]"
- default n
- depends BR2_i386
- select BR2_LINUX_PCMCIA_SUPPORT
- help
- Build firmware images for x86 based boards
- (e.g. Soekris net4521 and net4801, PC Engines WRAP...)
-
-config BR2_LINUX_2_6_BRCM
- bool "Support for Broadcom based routers [2.6]"
- default n
- depends BR2_mipsel
- select BR2_LINUX_PCMCIA_SUPPORT
- help
- Build firmware images for Broadcom based routers
- (e.g. Netgear WGT634u)
+menu "Target Root Filesystem"
-config BR2_LINUX_2_6_X86
- bool "Support for x86 boards [2.6]"
- default n
- depends BR2_i386
- select BR2_LINUX_PCMCIA_SUPPORT
- help
- Build firmware images for x86 based boards
- (e.g. Soekris net4521 and net4801, PC Engines WRAP...)
+ config BR2_TARGET_ROOTFS_JFFS2
+ bool "jffs2"
+ default y
+ help
+ Build a jffs2 root filesystem
-config BR2_LINUX_2_4_AR531X
- bool "Support for Atheros ar531x based APs"
- default n
- depends BR2_mips
- help
- Build firmware images for Atheros ar531x based boards
- (e.g. Netgear WGT624, Linksys WRT55AG)
+ config BR2_TARGET_ROOTFS_SQUASHFS_LZMA
+ bool "squashfs-lzma"
+ default y
+ depends !BR2_LINUX_2_6_ARUBA
+ depends !BR2_LINUX_2_6_XSCALE
+ help
+ Build a squashfs-lzma root filesystem
-endchoice
+ config BR2_TARGET_ROOTFS_TGZ
+ bool "tgz"
+ default y
+ help
+ Build a compressed tar archive of the the root filesystem
+endmenu
-config BR2_LINUX_PCMCIA_SUPPORT
- bool
- default n
- depends BR2_LINUX_2_4_X86 || BR2_LINUX_2_4_BRCM || BR2_LINUX_2_6_X86 || BR2_LINUX_2_6_BRCM
-
+menu "Kernel Configuration / Device Support"
-comment "Device specific modules"
+comment "Device specific configuration"
source "target/linux/*-2.[46]/Config.in"
+comment "Kernel modules"
-comment "Networking modules"
+menu "Networking modules"
config BR2_PACKAGE_KMOD_ATM
prompt "kmod-atm.......................... ATM support"
default m
help
Kernel support for GRE tunnels
+
+config BR2_PACKAGE_KMOD_IMQ
+ prompt "kmod-imq.......................... Intermediate Queueing device"
+ tristate
+ default m
+ help
+ Kernel support for the Intermediate Queueing device
config BR2_PACKAGE_KMOD_IPV6
prompt "kmod-ipv6......................... IPv6 support"
help
Kernel support for the TUN/TAP tunneling device
-comment "Filtering/Firewalling"
+endmenu
+
+menu "Filtering/Firewalling"
config BR2_PACKAGE_KMOD_ARPTABLES
prompt "kmod-arptables.................... ARP firewalling support"
* ip_nat_proto_gre
* ip_conntrack_pptp
* ip_nat_pptp
+ * ip_conntrack_sip
+ * ip_nat_sip
* ip_nat_snmp_basic
* ip_conntrack_tftp
help
IPv6 firewalling support
-comment "Block devices support"
+endmenu
+
+menu "Block devices support"
config BR2_PACKAGE_KMOD_IDE
prompt "kmod-ide.......................... IDE support"
tristate
default m
- depends BR2_LINUX_2_4_X86 || BR2_LINUX_2_4_BRCM || BR2_LINUX_2_6_X86 || BR2_LINUX_2_6_BRCM
+ depends BR2_LINUX_2_4_X86 || BR2_LINUX_2_6_X86 || BR2_LINUX_2_4_BRCM || BR2_LINUX_2_6_BRCM
help
Kernel modules for IDE support
useful for usb mass storage devices (e.g. on WL-HDD)
+
+ Includes:
+ - ide-core
+ - ide-detect
+ - ide-disk
+ - pdc202xx_old
config BR2_PACKAGE_KMOD_LOOP
prompt "kmod-loop......................... Loop mount support"
help
Kernel module for network block device
-comment "Cryptographic support"
+endmenu
config BR2_PACKAGE_KMOD_CRYPTO
- prompt "kmod-crypto....................... CryptoAPI modules"
+ prompt "CryptoAPI modules"
tristate
default m
select BUSYBOX_CONFIG_FEATURE_CHECK_TAINTED_MODULE
help
Kernel modules for cryptographic algorithms
-comment "Filesystems support"
+menu "Filesystems support"
-config BR2_PACKAGE_KMOD_CIFS
+config BR2_PACKAGE_KMOD_FS_CIFS
prompt "kmod-fs-cifs...................... CIFS support"
tristate
default m
help
Kernel modules for XFS filesystem support
-comment "Multimedia devices support"
+endmenu
+
+menu "Multimedia devices support"
config BR2_PACKAGE_KMOD_PWC
prompt "kmod-pwc.......................... Kernel driver for USB Philips Cameras"
tristate
- default n if BR2_LINUX_2_4_AR531X
+ depends BR2_PACKAGE_KMOD_USB
default m
config BR2_PACKAGE_KMOD_SOUNDCORE
tristate
default m
-comment "Native Language support"
+endmenu
+
+menu "Native Language support"
config BR2_PACKAGE_KMOD_NLS_BASE
prompt "kmod-nls-base..................... Native Language support"
help
Kernel native language support
-comment "Network devices support"
+endmenu
+
+menu "Network devices support"
+ depends BR2_LINUX_2_4_X86 || BR2_LINUX_2_6_X86
config BR2_PACKAGE_KMOD_NET_3C59X
prompt "kmod-net-3c59x.................... 3Com 3c590/3c900 series (592/595/597) \"Vortex/Boomerang\" Ethernet kernel support"
tristate
- default n if BR2_LINUX_2_4_AR531X
+ depends BR2_LINUX_2_4_X86 || BR2_LINUX_2_6_X86
default m
help
This option enables driver support for a large number of 10mbps and
config BR2_PACKAGE_KMOD_NET_8139TOO
prompt "kmod-net-8139too.................. RealTek RTL-8139 PCI Fast Ethernet Adapter kernel support"
tristate
- default n if BR2_LINUX_2_4_AR531X
+ depends BR2_LINUX_2_4_X86 || BR2_LINUX_2_6_X86
default m
help
This is a driver for the Fast Ethernet PCI network cards based on
config BR2_PACKAGE_KMOD_NET_AIRO
prompt "kmod-net-airo..................... Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards kernel support"
tristate
- default n if BR2_LINUX_2_4_AR531X
+ depends BR2_LINUX_2_4_X86 || BR2_LINUX_2_6_X86
default m
help
This is the standard Linux driver to support Cisco/Aironet ISA and
config BR2_PACKAGE_KMOD_NET_E100
prompt "kmod-net-e100..................... Intel(R) PRO/100+ cards kernel support"
tristate
+ depends BR2_LINUX_2_4_X86 || BR2_LINUX_2_6_X86
default m
help
Intel(R) PRO/100+ cards kernel support
-config BR2_PACKAGE_KMOD_NET_B44
- prompt "kmod-net-b44...................... Broadcom 44XX, 47XX ethernet driver"
- tristate
- depends !BR2_LINUX_2_6_BRCM && !BR2_LINUX_2_4_BRCM
- default m
- help
- Free driver for Broadcom Ethernet chipsets
-
config BR2_PACKAGE_KMOD_NET_HERMES
prompt "kmod-net-hermes................... Hermes chipset 802.11b support (Orinoco/Prism2/Symbol) kernel support"
tristate
- default n if BR2_LINUX_2_4_AR531X
+ depends BR2_LINUX_2_4_X86 || BR2_LINUX_2_6_X86
default m
help
A driver for 802.11b wireless cards based based on the "Hermes" or
config BR2_PACKAGE_KMOD_NET_NATSEMI
prompt "kmod-net-natsemi.................. National Semiconductor DP8381x series PCI Ethernet kernel support"
tristate
- default n if BR2_LINUX_2_4_AR531X
+ depends BR2_LINUX_2_4_X86 || BR2_LINUX_2_6_X86
default m
help
This driver is for the National Semiconductor DP83810 series,
config BR2_PACKAGE_KMOD_NET_PRISM54
prompt "kmod-net-prism54.................. Intersil Prism GT/Duette/Indigo PCI/PCMCIA cards kernel support"
tristate
- default n if BR2_LINUX_2_4_AR531X
+ depends BR2_LINUX_2_4_X86 || BR2_LINUX_2_6_X86 || BR2_LINUX_2_4_BRCM || BR2_LINUX_2_6_BRCM
default m
help
Enable PCI and Cardbus support for the following chipset based cards:
Note: You need a motherboard with DMA support to use any of these cards.
-comment "PCMCIA/CardBus support"
+endmenu
+
+menu "PCMCIA/CardBus support"
+ depends BR2_LINUX_2_4_X86 || BR2_LINUX_2_6_X86 || BR2_LINUX_2_4_BRCM || BR2_LINUX_2_6_BRCM
config BR2_PACKAGE_KMOD_PCMCIA_CORE
prompt "kmod-pcmcia-core.................. PCMCIA/CardBus support"
depends BR2_LINUX_PCMCIA_SUPPORT
tristate
- default n if BR2_LINUX_2_4_AR531X
+ depends BR2_LINUX_2_4_X86 || BR2_LINUX_2_6_X86 || BR2_LINUX_2_4_BRCM || BR2_LINUX_2_6_BRCM
default m
config BR2_PACKAGE_KMOD_PCMCIA_SERIAL
default m
depends BR2_PACKAGE_KMOD_PCMCIA_CORE
-comment "USB support"
+endmenu
+
+menu "USB support"
config BR2_PACKAGE_KMOD_USB
prompt "kmod-usb-core..................... USB support"
default n if BR2_LINUX_2_4_AR531X
default m
-config BR2_PACKAGE_KMOD_USB_UHCI
+config BR2_PACKAGE_KMOD_USB_UHCI
prompt "kmod-usb-uhci................... Support for UHCI controllers"
tristate
- default m
+ default n if BR2_LINUX_2_6_AU1000
depends BR2_PACKAGE_KMOD_USB
select BR2_PACKAGE_KMOD_USB_CONTROLLER
config BR2_PACKAGE_KMOD_USB2
prompt "kmod-usb2....................... Support for USB 2.0 controllers"
tristate
- default m
+ default n if BR2_LINUX_2_6_AU1000
depends BR2_PACKAGE_KMOD_USB
select BR2_PACKAGE_KMOD_USB_CONTROLLER
depends BR2_PACKAGE_KMOD_USB_SERIAL
config BR2_PACKAGE_KMOD_USB_SERIAL_VISOR
- prompt "kmod-usb-serial-visor.......... Support for Handspring Visor / Palm m50x / Sony Clie Driver"
+ prompt "kmod-usb-serial-visor........... Support for Handspring Visor / Palm m50x / Sony Clie Driver"
tristate
default m
depends BR2_PACKAGE_KMOD_USB_SERIAL
default m
depends BR2_PACKAGE_KMOD_USB_CONTROLLER
-comment "Misc. devices support"
+config BR2_PACKAGE_KMOD_USB_ATM_SPEEDTOUCH
+ prompt "kmod-usb-atm-speedtouch......... Support for USB Speedtouch ADSL modem"
+ tristate
+ default m
+ depends BR2_PACKAGE_KMOD_USB_ATM
+
+endmenu
+
+menu "Misc. devices support"
config BR2_PACKAGE_KMOD_AX25
prompt "kmod-ax25......................... AX25 support"
Kernel modules for line printer and parallel port support
config BR2_PACKAGE_KMOD_SOFTDOG
- prompt "kmod-softdog..................... software watchdog"
+ prompt "kmod-softdog...................... Software watchdog"
tristate
default m
help
Driver for the NatSemi SC1x00 series Watchdog
found on Soekris net4801 boards
-comment "Additional kernel modules"
+endmenu
+
+menu "Additional kernel modules"
source "target/linux/package/Config.in"
+
+endmenu
+
+endmenu
projects / openwrt / svn-archive / archive.git / blobdiff