RAM_ROOT=/tmp/root
+export BACKUP_FILE=sysupgrade.tgz # file extracted by preinit
+
[ -x /usr/bin/ldd ] || ldd() { LD_TRACE_LOADED_OBJECTS=1 $*; }
-libs() { ldd $* 2>/dev/null | sed -r 's/(.* => )?(.*) .*/\2/'; }
+libs() { ldd $* 2>/dev/null | sed -E 's/(.* => )?(.*) .*/\2/'; }
install_file() { # <file> [ <file> ... ]
local target dest dir
(get_image "$@" | dd bs=4 count=1 | hexdump -v -n 4 -e '1/1 "%02x"') 2>/dev/null
}
+get_magic_gpt() {
+ (get_image "$@" | dd bs=8 count=1 skip=64) 2>/dev/null
+}
+
+get_magic_vfat() {
+ (get_image "$@" | dd bs=1 count=3 skip=54) 2>/dev/null
+}
+
+part_magic_efi() {
+ local magic=$(get_magic_gpt "$@")
+ [ "$magic" = "EFI PART" ]
+}
+
+part_magic_fat() {
+ local magic=$(get_magic_vfat "$@")
+ [ "$magic" = "FAT" ]
+}
+
export_bootdevice() {
- local cmdline bootdisk rootpart uuid blockdev uevent line
+ local cmdline bootdisk rootpart uuid blockdev uevent line class
local MAJOR MINOR DEVNAME DEVTYPE
if read cmdline < /proc/cmdline; then
fi
done
;;
+ PARTUUID=????????-????-????-????-??????????02)
+ uuid="${rootpart#PARTUUID=}"
+ uuid="${uuid%02}00"
+ for disk in $(find /dev -type b); do
+ set -- $(dd if=$disk bs=1 skip=568 count=16 2>/dev/null | hexdump -v -e '8/1 "%02x "" "2/1 "%02x""-"6/1 "%02x"')
+ if [ "$4$3$2$1-$6$5-$8$7-$9" = "$uuid" ]; then
+ uevent="/sys/class/block/${disk##*/}/uevent"
+ break
+ fi
+ done
+ ;;
/dev/*)
uevent="/sys/class/block/${rootpart##*/}/../uevent"
;;
+ 0x[a-f0-9][a-f0-9][a-f0-9] | 0x[a-f0-9][a-f0-9][a-f0-9][a-f0-9] | \
+ [a-f0-9][a-f0-9][a-f0-9] | [a-f0-9][a-f0-9][a-f0-9][a-f0-9])
+ rootpart=0x${rootpart#0x}
+ for class in /sys/class/block/*; do
+ while read line; do
+ export -n "$line"
+ done < "$class/uevent"
+ if [ $((rootpart/256)) = $MAJOR -a $((rootpart%256)) = $MINOR ]; then
+ uevent="$class/../uevent"
+ fi
+ done
+ ;;
esac
if [ -e "$uevent" ]; then
rm -f "/tmp/partmap.$filename"
local part
- for part in 1 2 3 4; do
- set -- $(hexdump -v -n 12 -s "$((0x1B2 + $part * 16))" -e '3/4 "0x%08X "' "$disk")
+ part_magic_efi "$disk" && {
+ #export_partdevice will fail when partition number is greater than 15, as
+ #the partition major device number is not equal to the disk major device number
+ for part in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15; do
+ set -- $(hexdump -v -n 48 -s "$((0x380 + $part * 0x80))" -e '4/4 "%08x"" "4/4 "%08x"" "4/4 "0x%08X "' "$disk")
+
+ local type="$1"
+ local lba="$(( $(hex_le32_to_cpu $4) * 0x100000000 + $(hex_le32_to_cpu $3) ))"
+ local end="$(( $(hex_le32_to_cpu $6) * 0x100000000 + $(hex_le32_to_cpu $5) ))"
+ local num="$(( $end - $lba ))"
+
+ [ "$type" = "00000000000000000000000000000000" ] && continue
- local type="$(( $(hex_le32_to_cpu $1) % 256))"
- local lba="$(( $(hex_le32_to_cpu $2) ))"
- local num="$(( $(hex_le32_to_cpu $3) ))"
+ printf "%2d %5d %7d\n" $part $lba $num >> "/tmp/partmap.$filename"
+ done
+ } || {
+ for part in 1 2 3 4; do
+ set -- $(hexdump -v -n 12 -s "$((0x1B2 + $part * 16))" -e '3/4 "0x%08X "' "$disk")
- [ $type -gt 0 ] || continue
+ local type="$(( $(hex_le32_to_cpu $1) % 256))"
+ local lba="$(( $(hex_le32_to_cpu $2) ))"
+ local num="$(( $(hex_le32_to_cpu $3) ))"
- printf "%2d %5d %7d\n" $part $lba $num >> "/tmp/partmap.$filename"
- done
+ [ $type -gt 0 ] || continue
+
+ printf "%2d %5d %7d\n" $part $lba $num >> "/tmp/partmap.$filename"
+ done
+ }
fi
}
# $(2): (optional) pipe command to extract firmware, e.g. dd bs=n skip=m
default_do_upgrade() {
sync
- if [ "$SAVE_CONFIG" -eq 1 ]; then
- get_image "$1" "$2" | mtd $MTD_ARGS $MTD_CONFIG_ARGS -j "$CONF_TAR" write - "${PART_NAME:-image}"
+ if [ -n "$UPGRADE_BACKUP" ]; then
+ get_image "$1" "$2" | mtd $MTD_ARGS $MTD_CONFIG_ARGS -j "$UPGRADE_BACKUP" write - "${PART_NAME:-image}"
else
get_image "$1" "$2" | mtd $MTD_ARGS write - "${PART_NAME:-image}"
fi