RAM_ROOT=/tmp/root
+export BACKUP_FILE=sysupgrade.tgz # file extracted by preinit
+
[ -x /usr/bin/ldd ] || ldd() { LD_TRACE_LOADED_OBJECTS=1 $*; }
-libs() { ldd $* 2>/dev/null | sed -r 's/(.* => )?(.*) .*/\2/'; }
+libs() { ldd $* 2>/dev/null | sed -E 's/(.* => )?(.*) .*/\2/'; }
install_file() { # <file> [ <file> ... ]
local target dest dir
get_image() { # <source> [ <command> ]
local from="$1"
- local cat="$2"
+ local cmd="$2"
- if [ -z "$cat" ]; then
+ if [ -z "$cmd" ]; then
local magic="$(dd if="$from" bs=2 count=1 2>/dev/null | hexdump -n 2 -e '1/1 "%02x"')"
case "$magic" in
- 1f8b) cat="zcat";;
- 425a) cat="bzcat";;
- *) cat="cat";;
+ 1f8b) cmd="zcat";;
+ 425a) cmd="bzcat";;
+ *) cmd="cat";;
esac
fi
- $cat "$from" 2>/dev/null
+ cat "$from" 2>/dev/null | $cmd
}
get_magic_word() {
(get_image "$@" | dd bs=4 count=1 | hexdump -v -n 4 -e '1/1 "%02x"') 2>/dev/null
}
+get_magic_gpt() {
+ (get_image "$@" | dd bs=8 count=1 skip=64) 2>/dev/null
+}
+
+get_magic_vfat() {
+ (get_image "$@" | dd bs=1 count=3 skip=54) 2>/dev/null
+}
+
+part_magic_efi() {
+ local magic=$(get_magic_gpt "$@")
+ [ "$magic" = "EFI PART" ]
+}
+
+part_magic_fat() {
+ local magic=$(get_magic_vfat "$@")
+ [ "$magic" = "FAT" ]
+}
+
export_bootdevice() {
- local cmdline uuid disk uevent
+ local cmdline bootdisk rootpart uuid blockdev uevent line class
local MAJOR MINOR DEVNAME DEVTYPE
if read cmdline < /proc/cmdline; then
case "$cmdline" in
*block2mtd=*)
- disk="${cmdline##*block2mtd=}"
- disk="${disk%%,*}"
+ bootdisk="${cmdline##*block2mtd=}"
+ bootdisk="${bootdisk%%,*}"
;;
*root=*)
- disk="${cmdline##*root=}"
- disk="${disk%% *}"
+ rootpart="${cmdline##*root=}"
+ rootpart="${rootpart%% *}"
;;
esac
- case "$disk" in
- PARTUUID=[a-f0-9][a-f0-9][a-f0-9][a-f0-9][a-f0-9][a-f0-9][a-f0-9][a-f0-9]-02)
- uuid="${disk#PARTUUID=}"
- uuid="${uuid%-02}"
- for disk in $(find /dev -type b); do
- set -- $(dd if=$disk bs=1 skip=440 count=4 2>/dev/null | hexdump -v -e '4/1 "%02x "')
+ case "$bootdisk" in
+ /dev/*)
+ uevent="/sys/class/block/${bootdisk##*/}/uevent"
+ ;;
+ esac
+
+ case "$rootpart" in
+ PARTUUID=[a-f0-9][a-f0-9][a-f0-9][a-f0-9][a-f0-9][a-f0-9][a-f0-9][a-f0-9]-[a-f0-9][a-f0-9])
+ uuid="${rootpart#PARTUUID=}"
+ uuid="${uuid%-[a-f0-9][a-f0-9]}"
+ for blockdev in $(find /dev -type b); do
+ set -- $(dd if=$blockdev bs=1 skip=440 count=4 2>/dev/null | hexdump -v -e '4/1 "%02x "')
if [ "$4$3$2$1" = "$uuid" ]; then
+ uevent="/sys/class/block/${blockdev##*/}/uevent"
+ break
+ fi
+ done
+ ;;
+ PARTUUID=????????-????-????-????-??????????02)
+ uuid="${rootpart#PARTUUID=}"
+ uuid="${uuid%02}00"
+ for disk in $(find /dev -type b); do
+ set -- $(dd if=$disk bs=1 skip=568 count=16 2>/dev/null | hexdump -v -e '8/1 "%02x "" "2/1 "%02x""-"6/1 "%02x"')
+ if [ "$4$3$2$1-$6$5-$8$7-$9" = "$uuid" ]; then
uevent="/sys/class/block/${disk##*/}/uevent"
break
fi
done
;;
/dev/*)
- uevent="/sys/class/block/${disk##*/}/uevent"
+ uevent="/sys/class/block/${rootpart##*/}/../uevent"
+ ;;
+ 0x[a-f0-9][a-f0-9][a-f0-9] | 0x[a-f0-9][a-f0-9][a-f0-9][a-f0-9] | \
+ [a-f0-9][a-f0-9][a-f0-9] | [a-f0-9][a-f0-9][a-f0-9][a-f0-9])
+ rootpart=0x${rootpart#0x}
+ for class in /sys/class/block/*; do
+ while read line; do
+ export -n "$line"
+ done < "$class/uevent"
+ if [ $((rootpart/256)) = $MAJOR -a $((rootpart%256)) = $MINOR ]; then
+ uevent="$class/../uevent"
+ fi
+ done
;;
esac
if [ -e "$uevent" ]; then
- . "$uevent"
-
+ while read line; do
+ export -n "$line"
+ done < "$uevent"
export BOOTDEV_MAJOR=$MAJOR
export BOOTDEV_MINOR=$MINOR
return 0
export_partdevice() {
local var="$1" offset="$2"
- local uevent MAJOR MINOR DEVNAME DEVTYPE
+ local uevent line MAJOR MINOR DEVNAME DEVTYPE
for uevent in /sys/class/block/*/uevent; do
- . "$uevent"
+ while read line; do
+ export -n "$line"
+ done < "$uevent"
if [ $BOOTDEV_MAJOR = $MAJOR -a $(($BOOTDEV_MINOR + $offset)) = $MINOR -a -b "/dev/$DEVNAME" ]; then
export "$var=$DEVNAME"
return 0
return 1
}
+hex_le32_to_cpu() {
+ [ "$(echo 01 | hexdump -v -n 2 -e '/2 "%x"')" = "3031" ] && {
+ echo "${1:0:2}${1:8:2}${1:6:2}${1:4:2}${1:2:2}"
+ return
+ }
+ echo "$@"
+}
+
get_partitions() { # <device> <filename>
local disk="$1"
local filename="$2"
if [ -b "$disk" -o -f "$disk" ]; then
v "Reading partition table from $filename..."
- local magic="$(hexdump -v -n 2 -s 0x1FE -e '1/2 "0x%04X"' "$disk")"
- if [ "$magic" != 0xAA55 ]; then
+ local magic=$(dd if="$disk" bs=2 count=1 skip=255 2>/dev/null)
+ if [ "$magic" != $'\x55\xAA' ]; then
v "Invalid partition table on $disk"
exit
fi
rm -f "/tmp/partmap.$filename"
local part
- for part in 1 2 3 4; do
- set -- $(hexdump -v -n 12 -s "$((0x1B2 + $part * 16))" -e '3/4 "0x%08X "' "$disk")
+ part_magic_efi "$disk" && {
+ #export_partdevice will fail when partition number is greater than 15, as
+ #the partition major device number is not equal to the disk major device number
+ for part in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15; do
+ set -- $(hexdump -v -n 48 -s "$((0x380 + $part * 0x80))" -e '4/4 "%08x"" "4/4 "%08x"" "4/4 "0x%08X "' "$disk")
+
+ local type="$1"
+ local lba="$(( $(hex_le32_to_cpu $4) * 0x100000000 + $(hex_le32_to_cpu $3) ))"
+ local end="$(( $(hex_le32_to_cpu $6) * 0x100000000 + $(hex_le32_to_cpu $5) ))"
+ local num="$(( $end - $lba ))"
+
+ [ "$type" = "00000000000000000000000000000000" ] && continue
- local type="$(($1 % 256))"
- local lba="$(($2))"
- local num="$(($3))"
+ printf "%2d %5d %7d\n" $part $lba $num >> "/tmp/partmap.$filename"
+ done
+ } || {
+ for part in 1 2 3 4; do
+ set -- $(hexdump -v -n 12 -s "$((0x1B2 + $part * 16))" -e '3/4 "0x%08X "' "$disk")
- [ $type -gt 0 ] || continue
+ local type="$(( $(hex_le32_to_cpu $1) % 256))"
+ local lba="$(( $(hex_le32_to_cpu $2) ))"
+ local num="$(( $(hex_le32_to_cpu $3) ))"
- printf "%2d %5d %7d\n" $part $lba $num >> "/tmp/partmap.$filename"
- done
+ [ $type -gt 0 ] || continue
+
+ printf "%2d %5d %7d\n" $part $lba $num >> "/tmp/partmap.$filename"
+ done
+ }
fi
}
-jffs2_copy_config() {
- if grep rootfs_data /proc/mtd >/dev/null; then
- # squashfs+jffs2
- mtd -e rootfs_data jffs2write "$CONF_TAR" rootfs_data
- else
- # jffs2
- mtd jffs2write "$CONF_TAR" rootfs
- fi
+indicate_upgrade() {
+ . /etc/diag.sh
+ set_state upgrade
}
# Flash firmware to MTD partition
# $(2): (optional) pipe command to extract firmware, e.g. dd bs=n skip=m
default_do_upgrade() {
sync
- if [ "$SAVE_CONFIG" -eq 1 ]; then
- get_image "$1" "$2" | mtd $MTD_CONFIG_ARGS -j "$CONF_TAR" write - "${PART_NAME:-image}"
- else
- get_image "$1" "$2" | mtd write - "${PART_NAME:-image}"
- fi
-}
-
-do_upgrade_stage2() {
- v "Performing system upgrade..."
- if [ -n "$do_upgrade" ]; then
- eval "$do_upgrade"
- elif type 'platform_do_upgrade' >/dev/null 2>/dev/null; then
- platform_do_upgrade "$IMAGE"
+ if [ -n "$UPGRADE_BACKUP" ]; then
+ get_image "$1" "$2" | mtd $MTD_ARGS $MTD_CONFIG_ARGS -j "$UPGRADE_BACKUP" write - "${PART_NAME:-image}"
else
- default_do_upgrade "$IMAGE"
- fi
-
- if [ "$SAVE_CONFIG" -eq 1 ] && type 'platform_copy_config' >/dev/null 2>/dev/null; then
- platform_copy_config
+ get_image "$1" "$2" | mtd $MTD_ARGS write - "${PART_NAME:-image}"
fi
-
- v "Upgrade completed"
- sleep 1
-
- v "Rebooting system..."
- umount -a
- reboot -f
- sleep 5
- echo b 2>/dev/null >/proc/sysrq-trigger
+ [ $? -ne 0 ] && exit 1
}